diff options
-rw-r--r-- | drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 47 | ||||
-rw-r--r-- | drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 44 |
2 files changed, 50 insertions, 41 deletions
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 45b9a3db3606..dd1df605a1d6 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -208,30 +208,41 @@ void gpmi_dump_info(struct gpmi_nand_data *this) u32 reg; int i; - pr_err("Show GPMI registers :\n"); + dev_err(this->dev, "Show GPMI registers :\n"); for (i = 0; i <= HW_GPMI_DEBUG / 0x10 + 1; i++) { reg = readl(r->gpmi_regs + i * 0x10); - pr_err("offset 0x%.3x : 0x%.8x\n", i * 0x10, reg); + dev_err(this->dev, "offset 0x%.3x : 0x%.8x\n", i * 0x10, reg); } /* start to print out the BCH info */ - pr_err("Show BCH registers :\n"); + dev_err(this->dev, "Show BCH registers :\n"); for (i = 0; i <= HW_BCH_VERSION / 0x10 + 1; i++) { reg = readl(r->bch_regs + i * 0x10); - pr_err("offset 0x%.3x : 0x%.8x\n", i * 0x10, reg); + dev_err(this->dev, "offset 0x%.3x : 0x%.8x\n", i * 0x10, reg); } - pr_err("BCH Geometry :\n"); - pr_err("GF length : %u\n", geo->gf_len); - pr_err("ECC Strength : %u\n", geo->ecc_strength); - pr_err("Page Size in Bytes : %u\n", geo->page_size); - pr_err("Metadata Size in Bytes : %u\n", geo->metadata_size); - pr_err("ECC Chunk Size in Bytes: %u\n", geo->ecc_chunk_size); - pr_err("ECC Chunk Count : %u\n", geo->ecc_chunk_count); - pr_err("Payload Size in Bytes : %u\n", geo->payload_size); - pr_err("Auxiliary Size in Bytes: %u\n", geo->auxiliary_size); - pr_err("Auxiliary Status Offset: %u\n", geo->auxiliary_status_offset); - pr_err("Block Mark Byte Offset : %u\n", geo->block_mark_byte_offset); - pr_err("Block Mark Bit Offset : %u\n", geo->block_mark_bit_offset); + dev_err(this->dev, "BCH Geometry :\n" + "GF length : %u\n" + "ECC Strength : %u\n" + "Page Size in Bytes : %u\n" + "Metadata Size in Bytes : %u\n" + "ECC Chunk Size in Bytes: %u\n" + "ECC Chunk Count : %u\n" + "Payload Size in Bytes : %u\n" + "Auxiliary Size in Bytes: %u\n" + "Auxiliary Status Offset: %u\n" + "Block Mark Byte Offset : %u\n" + "Block Mark Bit Offset : %u\n", + geo->gf_len, + geo->ecc_strength, + geo->page_size, + geo->metadata_size, + geo->ecc_chunk_size, + geo->ecc_chunk_count, + geo->payload_size, + geo->auxiliary_size, + geo->auxiliary_status_offset, + geo->block_mark_byte_offset, + geo->block_mark_bit_offset); } /* Configures the geometry for BCH. */ @@ -993,7 +1004,7 @@ void gpmi_begin(struct gpmi_nand_data *this) /* Enable the clock. */ ret = gpmi_enable_clk(this); if (ret) { - pr_err("We failed in enable the clk\n"); + dev_err(this->dev, "We failed in enable the clk\n"); goto err_out; } @@ -1097,7 +1108,7 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip) mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip); reg = readl(r->gpmi_regs + HW_GPMI_STAT); } else - pr_err("unknow arch.\n"); + dev_err(this->dev, "unknow arch.\n"); return reg & mask; } diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 5617876728ad..46544edb1b2f 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -385,7 +385,7 @@ void prepare_data_dma(struct gpmi_nand_data *this, enum dma_data_direction dr) ret = dma_map_sg(this->dev, sgl, 1, dr); if (ret == 0) - pr_err("DMA mapping failed.\n"); + dev_err(this->dev, "DMA mapping failed.\n"); this->direct_dma_map_ok = false; } @@ -419,7 +419,7 @@ static void dma_irq_callback(void *param) break; default: - pr_err("in wrong DMA operation.\n"); + dev_err(this->dev, "in wrong DMA operation.\n"); } complete(dma_c); @@ -441,7 +441,8 @@ int start_dma_without_bch_irq(struct gpmi_nand_data *this, /* Wait for the interrupt from the DMA block. */ err = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000)); if (!err) { - pr_err("DMA timeout, last DMA :%d\n", this->last_dma_type); + dev_err(this->dev, "DMA timeout, last DMA :%d\n", + this->last_dma_type); gpmi_dump_info(this); return -ETIMEDOUT; } @@ -470,7 +471,8 @@ int start_dma_with_bch_irq(struct gpmi_nand_data *this, /* Wait for the interrupt from the BCH block. */ err = wait_for_completion_timeout(bch_c, msecs_to_jiffies(1000)); if (!err) { - pr_err("BCH timeout, last DMA :%d\n", this->last_dma_type); + dev_err(this->dev, "BCH timeout, last DMA :%d\n", + this->last_dma_type); gpmi_dump_info(this); return -ETIMEDOUT; } @@ -495,7 +497,7 @@ static int acquire_register_block(struct gpmi_nand_data *this, else if (!strcmp(res_name, GPMI_NAND_BCH_REGS_ADDR_RES_NAME)) res->bch_regs = p; else - pr_err("unknown resource name : %s\n", res_name); + dev_err(this->dev, "unknown resource name : %s\n", res_name); return 0; } @@ -509,7 +511,7 @@ static int acquire_bch_irq(struct gpmi_nand_data *this, irq_handler_t irq_h) r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name); if (!r) { - pr_err("Can't get resource for %s\n", res_name); + dev_err(this->dev, "Can't get resource for %s\n", res_name); return -ENODEV; } @@ -538,7 +540,7 @@ static int acquire_dma_channels(struct gpmi_nand_data *this) /* request dma channel */ dma_chan = dma_request_slave_channel(&pdev->dev, "rx-tx"); if (!dma_chan) { - pr_err("Failed to request DMA channel.\n"); + dev_err(this->dev, "Failed to request DMA channel.\n"); goto acquire_err; } @@ -681,8 +683,7 @@ static int read_page_prepare(struct gpmi_nand_data *this, length, DMA_FROM_DEVICE); if (dma_mapping_error(dev, dest_phys)) { if (alt_size < length) { - pr_err("%s, Alternate buffer is too small\n", - __func__); + dev_err(dev, "Alternate buffer is too small\n"); return -ENOMEM; } goto map_failed; @@ -732,8 +733,7 @@ static int send_page_prepare(struct gpmi_nand_data *this, DMA_TO_DEVICE); if (dma_mapping_error(dev, source_phys)) { if (alt_size < length) { - pr_err("%s, Alternate buffer is too small\n", - __func__); + dev_err(dev, "Alternate buffer is too small\n"); return -ENOMEM; } goto map_failed; @@ -821,7 +821,6 @@ static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this) error_alloc: gpmi_free_dma_buffer(this); - pr_err("Error allocating DMA buffers!\n"); return -ENOMEM; } @@ -853,7 +852,8 @@ static void gpmi_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl) ret = gpmi_send_command(this); if (ret) - pr_err("Chip: %u, Error %d\n", this->current_chip, ret); + dev_err(this->dev, "Chip: %u, Error %d\n", + this->current_chip, ret); this->command_length = 0; } @@ -981,7 +981,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, nfc_geo->payload_size, &payload_virt, &payload_phys); if (ret) { - pr_err("Inadequate DMA buffer\n"); + dev_err(this->dev, "Inadequate DMA buffer\n"); ret = -ENOMEM; return ret; } @@ -995,7 +995,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, nfc_geo->payload_size, payload_virt, payload_phys); if (ret) { - pr_err("Error in ECC-based read: %d\n", ret); + dev_err(this->dev, "Error in ECC-based read: %d\n", ret); return ret; } @@ -1081,7 +1081,7 @@ static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, nfc_geo->payload_size, &payload_virt, &payload_phys); if (ret) { - pr_err("Inadequate payload DMA buffer\n"); + dev_err(this->dev, "Inadequate payload DMA buffer\n"); return 0; } @@ -1091,7 +1091,7 @@ static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, nfc_geo->auxiliary_size, &auxiliary_virt, &auxiliary_phys); if (ret) { - pr_err("Inadequate auxiliary DMA buffer\n"); + dev_err(this->dev, "Inadequate auxiliary DMA buffer\n"); goto exit_auxiliary; } } @@ -1099,7 +1099,7 @@ static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, /* Ask the NFC. */ ret = gpmi_send_page(this, payload_phys, auxiliary_phys); if (ret) - pr_err("Error in ECC-based write: %d\n", ret); + dev_err(this->dev, "Error in ECC-based write: %d\n", ret); if (!this->swap_block_mark) { send_page_end(this, chip->oob_poi, mtd->oobsize, @@ -1516,7 +1516,7 @@ static int gpmi_set_geometry(struct gpmi_nand_data *this) /* Set up the NFC geometry which is used by BCH. */ ret = bch_set_geometry(this); if (ret) { - pr_err("Error setting BCH geometry : %d\n", ret); + dev_err(this->dev, "Error setting BCH geometry : %d\n", ret); return ret; } @@ -1666,15 +1666,13 @@ static int gpmi_nand_probe(struct platform_device *pdev) if (of_id) { pdev->id_entry = of_id->data; } else { - pr_err("Failed to find the right device id.\n"); + dev_err(&pdev->dev, "Failed to find the right device id.\n"); return -ENODEV; } this = devm_kzalloc(&pdev->dev, sizeof(*this), GFP_KERNEL); - if (!this) { - pr_err("Failed to allocate per-device memory\n"); + if (!this) return -ENOMEM; - } platform_set_drvdata(pdev, this); this->pdev = pdev; |