diff options
31 files changed, 160 insertions, 126 deletions
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index 7d2c72562c73..9148a01ed6d9 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -105,9 +105,13 @@ phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; phy-reset-duration = <20>; phy-supply = <&sw2_reg>; - phy-handle = <ðphy0>; status = "okay"; + fixed-link { + speed = <1000>; + full-duplex; + }; + mdio { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi index 236fc205c389..d0768ae429fa 100644 --- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi +++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi @@ -406,6 +406,18 @@ vin-supply = <&sw1_reg>; }; +®_pu { + vin-supply = <&sw1_reg>; +}; + +®_vdd1p1 { + vin-supply = <&sw2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&sw2_reg>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi index 828cf3e39784..c4e146f3341b 100644 --- a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi +++ b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi @@ -126,7 +126,7 @@ compatible = "nxp,pca8574"; reg = <0x3a>; gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/imx7d-meerkat96.dts b/arch/arm/boot/dts/imx7d-meerkat96.dts index 5339210b63d0..dd8003bd1fc0 100644 --- a/arch/arm/boot/dts/imx7d-meerkat96.dts +++ b/arch/arm/boot/dts/imx7d-meerkat96.dts @@ -193,7 +193,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; keep-power-in-suspend; - tuning-step = <2>; + fsl,tuning-step = <2>; vmmc-supply = <®_3p3v>; no-1-8-v; broken-cd; diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi index e57da0d32b98..e519897fae08 100644 --- a/arch/arm/boot/dts/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/imx7d-pico.dtsi @@ -351,7 +351,7 @@ pinctrl-2 = <&pinctrl_usdhc1_200mhz>; cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; bus-width = <4>; - tuning-step = <2>; + fsl,tuning-step = <2>; vmmc-supply = <®_3p3v>; wakeup-source; no-1-8-v; diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c index 020e6deb67c8..237e8aa9fe83 100644 --- a/arch/arm/mach-imx/pm-imx27.c +++ b/arch/arm/mach-imx/pm-imx27.c @@ -12,6 +12,7 @@ #include <linux/suspend.h> #include <linux/io.h> +#include "common.h" #include "hardware.h" static int mx27_suspend_enter(suspend_state_t state) diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 2ee527c00284..1026a816dcc0 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -458,20 +458,6 @@ static struct gpiod_lookup_table leds_gpio_table = { #ifdef CONFIG_LEDS_TRIGGERS DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger); - -static int ams_delta_camera_power(struct device *dev, int power) -{ - /* - * turn on camera LED - */ - if (power) - led_trigger_event(ams_delta_camera_led_trigger, LED_FULL); - else - led_trigger_event(ams_delta_camera_led_trigger, LED_OFF); - return 0; -} -#else -#define ams_delta_camera_power NULL #endif static struct platform_device ams_delta_audio_device = { diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index c40cf5ef8607..977b0b744c22 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -320,7 +320,7 @@ static int tps_setup(struct i2c_client *client, void *context) { if (!IS_BUILTIN(CONFIG_TPS65010)) return -ENOSYS; - + tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V | TPS_LDO1_ENABLE | TPS_VLDO1_3_0V); @@ -394,6 +394,8 @@ static void __init h2_init(void) BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(H2_NAND_RB_GPIO_PIN); + gpiod_add_lookup_table(&isp1301_gpiod_table); + omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 2c1e2b32b9b3..a745d64d4699 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -655,9 +655,13 @@ static int __init omap_pm_init(void) irq = INT_7XX_WAKE_UP_REQ; else if (cpu_is_omap16xx()) irq = INT_1610_WAKE_UP_REQ; - if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", - NULL)) - pr_err("Failed to request irq %d (peripheral wakeup)\n", irq); + else + irq = -1; + + if (irq >= 0) { + if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", NULL)) + pr_err("Failed to request irq %d (peripheral wakeup)\n", irq); + } /* Program new power ramp-up time * (0 for most boards since we don't lower voltage when in deep sleep) diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 418a61ecb827..5e86145db0e2 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -322,6 +322,7 @@ static int n8x0_mmc_get_cover_state(struct device *dev, int slot) static void n8x0_mmc_callback(void *data, u8 card_mask) { +#ifdef CONFIG_MMC_OMAP int bit, *openp, index; if (board_is_n800()) { @@ -339,7 +340,6 @@ static void n8x0_mmc_callback(void *data, u8 card_mask) else *openp = 0; -#ifdef CONFIG_MMC_OMAP omap_mmc_notify_cover_event(mmc_device, index, *openp); #else pr_warn("MMC: notify cover event not available\n"); diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 6409b47b73e4..7336c1fd0dda 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -165,6 +165,7 @@ config ARCH_MEDIATEK config ARCH_MESON bool "Amlogic Platforms" + select COMMON_CLK select MESON_IRQ_GPIO help This enables support for the arm64 based Amlogic SoCs diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts index 6c309b97587d..e8d31279b7a3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts @@ -46,7 +46,8 @@ eee-broken-100tx; qca,clk-out-frequency = <125000000>; qca,clk-out-strength = <AR803X_STRENGTH_FULL>; - vddio-supply = <&vddh>; + qca,keep-pll-enabled; + vddio-supply = <&vddio>; vddio: vddio-regulator { regulator-name = "VDDIO"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts index df212ed5bb94..e65d1c477e2c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts @@ -31,11 +31,10 @@ reg = <0x4>; eee-broken-1000t; eee-broken-100tx; - qca,clk-out-frequency = <125000000>; qca,clk-out-strength = <AR803X_STRENGTH_FULL>; - - vddio-supply = <&vddh>; + qca,keep-pll-enabled; + vddio-supply = <&vddio>; vddio: vddio-regulator { regulator-name = "VDDIO"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index eca06a0c3cf8..a30249ebffa8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -197,8 +197,8 @@ ddr: memory-controller@1080000 { compatible = "fsl,qoriq-memory-controller"; reg = <0x0 0x1080000 0x0 0x1000>; - interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; - big-endian; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + little-endian; }; dcfg: syscon@1e00000 { diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts index 631e01c1b9fd..be1e7d6f0ecb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts @@ -88,11 +88,11 @@ pinctrl-0 = <&pinctrl_codec2>; reg = <0x18>; #sound-dai-cells = <0>; - HPVDD-supply = <®_3p3v>; - SPRVDD-supply = <®_3p3v>; - SPLVDD-supply = <®_3p3v>; - AVDD-supply = <®_3p3v>; - IOVDD-supply = <®_3p3v>; + HPVDD-supply = <®_gen_3p3>; + SPRVDD-supply = <®_gen_3p3>; + SPLVDD-supply = <®_gen_3p3>; + AVDD-supply = <®_gen_3p3>; + IOVDD-supply = <®_gen_3p3>; DVDD-supply = <&vgen4_reg>; reset-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi index 4dc8383478ee..a08a568c31d9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -45,8 +45,8 @@ reg_12p0_main: regulator-12p0-main { compatible = "regulator-fixed"; regulator-name = "12V_MAIN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; regulator-always-on; }; @@ -77,15 +77,6 @@ regulator-always-on; }; - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - vin-supply = <®_3p3_main>; - regulator-name = "GEN_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - reg_usdhc2_vmmc: regulator-vsd-3v3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usdhc2>; @@ -415,11 +406,11 @@ pinctrl-0 = <&pinctrl_codec1>; reg = <0x18>; #sound-dai-cells = <0>; - HPVDD-supply = <®_3p3v>; - SPRVDD-supply = <®_3p3v>; - SPLVDD-supply = <®_3p3v>; - AVDD-supply = <®_3p3v>; - IOVDD-supply = <®_3p3v>; + HPVDD-supply = <®_gen_3p3>; + SPRVDD-supply = <®_gen_3p3>; + SPLVDD-supply = <®_gen_3p3>; + AVDD-supply = <®_gen_3p3>; + IOVDD-supply = <®_gen_3p3>; DVDD-supply = <&vgen4_reg>; reset-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index b2bcbf23eefd..ca59d1f711f8 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -42,12 +42,12 @@ }; }; - dmss: dmss { + dmss: bus@48000000 { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; dma-ranges; - ranges; + ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>; ti,sci-dev-id = <25>; @@ -134,7 +134,7 @@ }; }; - dmsc: dmsc@44043000 { + dmsc: system-controller@44043000 { compatible = "ti,k2g-sci"; ti,host-id = <12>; mbox-names = "rx", "tx"; @@ -148,7 +148,7 @@ #power-domain-cells = <2>; }; - k3_clks: clocks { + k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; }; @@ -373,8 +373,9 @@ clocks = <&k3_clks 145 0>; }; - main_gpio_intr: interrupt-controller0 { + main_gpio_intr: interrupt-controller@a00000 { compatible = "ti,sci-intr"; + reg = <0x00 0x00a00000 0x00 0x800>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi index 99e94dee1bd4..deb19ae5e168 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi @@ -74,8 +74,9 @@ clocks = <&k3_clks 148 0>; }; - mcu_gpio_intr: interrupt-controller1 { + mcu_gpio_intr: interrupt-controller@4210000 { compatible = "ti,sci-intr"; + reg = <0x00 0x04210000 0x00 0x200>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index cb340d1b401f..6cd3131eb9ff 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -433,8 +433,9 @@ #phy-cells = <0>; }; - intr_main_gpio: interrupt-controller0 { + intr_main_gpio: interrupt-controller@a00000 { compatible = "ti,sci-intr"; + reg = <0x0 0x00a00000 0x0 0x400>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; @@ -444,18 +445,19 @@ ti,interrupt-ranges = <0 392 32>; }; - main-navss { + main_navss: bus@30800000 { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; - ranges; + ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>; dma-coherent; dma-ranges; ti,sci-dev-id = <118>; - intr_main_navss: interrupt-controller1 { + intr_main_navss: interrupt-controller@310e0000 { compatible = "ti,sci-intr"; + reg = <0x0 0x310e0000 0x0 0x2000>; ti,intr-trigger-type = <4>; interrupt-controller; interrupt-parent = <&gic500>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index 0388c02c2203..f5b8ef2f5f77 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -116,11 +116,11 @@ }; }; - mcu-navss { + mcu_navss: bus@28380000 { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; - ranges; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; dma-coherent; dma-ranges; diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index ed42f13e7663..7cb864b4d74a 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -6,24 +6,24 @@ */ &cbass_wakeup { - dmsc: dmsc { + dmsc: system-controller@44083000 { compatible = "ti,am654-sci"; ti,host-id = <12>; - #address-cells = <1>; - #size-cells = <1>; - ranges; mbox-names = "rx", "tx"; mboxes= <&secure_proxy_main 11>, <&secure_proxy_main 13>; + reg-names = "debug_messages"; + reg = <0x44083000 0x1000>; + k3_pds: power-controller { compatible = "ti,sci-pm-domain"; #power-domain-cells = <2>; }; - k3_clks: clocks { + k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; }; @@ -69,8 +69,9 @@ power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>; }; - intr_wkup_gpio: interrupt-controller2 { + intr_wkup_gpio: interrupt-controller@42200000 { compatible = "ti,sci-intr"; + reg = <0x42200000 0x200>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 9e87fb313a54..eddb2ffb93ca 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -85,12 +85,6 @@ gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>; }; }; - - clk_ov5640_fixed: clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - }; }; &wkup_pmx0 { @@ -287,23 +281,6 @@ pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; - - ov5640: camera@3c { - compatible = "ovti,ov5640"; - reg = <0x3c>; - - clocks = <&clk_ov5640_fixed>; - clock-names = "xclk"; - - port { - csi2_cam0: endpoint { - remote-endpoint = <&csi2_phy0>; - clock-lanes = <0>; - data-lanes = <1 2>; - }; - }; - }; - }; &main_i2c2 { @@ -496,14 +473,6 @@ }; }; -&csi2_0 { - csi2_phy0: endpoint { - remote-endpoint = <&csi2_cam0>; - clock-lanes = <0>; - data-lanes = <1 2>; - }; -}; - &mcu_cpsw { pinctrl-names = "default"; pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index f86c493a44f1..19fea8adbcff 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -68,8 +68,9 @@ }; }; - main_gpio_intr: interrupt-controller0 { + main_gpio_intr: interrupt-controller@a00000 { compatible = "ti,sci-intr"; + reg = <0x00 0x00a00000 0x00 0x800>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; @@ -85,9 +86,12 @@ #size-cells = <2>; ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; ti,sci-dev-id = <199>; + dma-coherent; + dma-ranges; - main_navss_intr: interrupt-controller1 { + main_navss_intr: interrupt-controller@310e0000 { compatible = "ti,sci-intr"; + reg = <0x00 0x310e0000 0x00 0x4000>; ti,intr-trigger-type = <4>; interrupt-controller; interrupt-parent = <&gic500>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index 5e74e43822c3..5663fe3ea466 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -6,7 +6,7 @@ */ &cbass_mcu_wakeup { - dmsc: dmsc@44083000 { + dmsc: system-controller@44083000 { compatible = "ti,k2g-sci"; ti,host-id = <12>; @@ -23,7 +23,7 @@ #power-domain-cells = <2>; }; - k3_clks: clocks { + k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; }; @@ -96,8 +96,9 @@ clock-names = "fclk"; }; - wkup_gpio_intr: interrupt-controller2 { + wkup_gpio_intr: interrupt-controller@42200000 { compatible = "ti,sci-intr"; + reg = <0x00 0x42200000 0x00 0x400>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index c2aa45a3ac79..3bcafe4c1742 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -76,8 +76,9 @@ }; }; - main_gpio_intr: interrupt-controller0 { + main_gpio_intr: interrupt-controller@a00000 { compatible = "ti,sci-intr"; + reg = <0x00 0x00a00000 0x00 0x800>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; @@ -87,18 +88,19 @@ ti,interrupt-ranges = <8 392 56>; }; - main-navss { + main_navss: bus@30000000 { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; - ranges; + ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; dma-coherent; dma-ranges; ti,sci-dev-id = <199>; - main_navss_intr: interrupt-controller1 { + main_navss_intr: interrupt-controller@310e0000 { compatible = "ti,sci-intr"; + reg = <0x0 0x310e0000 0x0 0x4000>; ti,intr-trigger-type = <4>; interrupt-controller; interrupt-parent = <&gic500>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index d56e3475aee7..5e825e4d0306 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -6,7 +6,7 @@ */ &cbass_mcu_wakeup { - dmsc: dmsc@44083000 { + dmsc: system-controller@44083000 { compatible = "ti,k2g-sci"; ti,host-id = <12>; @@ -23,7 +23,7 @@ #power-domain-cells = <2>; }; - k3_clks: clocks { + k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; }; @@ -96,8 +96,9 @@ clock-names = "fclk"; }; - wkup_gpio_intr: interrupt-controller2 { + wkup_gpio_intr: interrupt-controller@42200000 { compatible = "ti,sci-intr"; + reg = <0x00 0x42200000 0x00 0x400>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; @@ -249,11 +250,11 @@ }; }; - mcu-navss { + mcu_navss: bus@28380000 { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; - ranges; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; dma-coherent; dma-ranges; diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 5fae60f8c135..38cb116ed433 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1334,6 +1334,34 @@ err_allow_idle: return error; } +static int sysc_reinit_module(struct sysc *ddata, bool leave_enabled) +{ + struct device *dev = ddata->dev; + int error; + + /* Disable target module if it is enabled */ + if (ddata->enabled) { + error = sysc_runtime_suspend(dev); + if (error) + dev_warn(dev, "reinit suspend failed: %i\n", error); + } + + /* Enable target module */ + error = sysc_runtime_resume(dev); + if (error) + dev_warn(dev, "reinit resume failed: %i\n", error); + + if (leave_enabled) + return error; + + /* Disable target module if no leave_enabled was set */ + error = sysc_runtime_suspend(dev); + if (error) + dev_warn(dev, "reinit suspend failed: %i\n", error); + + return error; +} + static int __maybe_unused sysc_noirq_suspend(struct device *dev) { struct sysc *ddata; @@ -1344,12 +1372,18 @@ static int __maybe_unused sysc_noirq_suspend(struct device *dev) (SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_NO_IDLE)) return 0; - return pm_runtime_force_suspend(dev); + if (!ddata->enabled) + return 0; + + ddata->needs_resume = 1; + + return sysc_runtime_suspend(dev); } static int __maybe_unused sysc_noirq_resume(struct device *dev) { struct sysc *ddata; + int error = 0; ddata = dev_get_drvdata(dev); @@ -1357,7 +1391,19 @@ static int __maybe_unused sysc_noirq_resume(struct device *dev) (SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_NO_IDLE)) return 0; - return pm_runtime_force_resume(dev); + if (ddata->cfg.quirks & SYSC_QUIRK_REINIT_ON_RESUME) { + error = sysc_reinit_module(ddata, ddata->needs_resume); + if (error) + dev_warn(dev, "noirq_resume failed: %i\n", error); + } else if (ddata->needs_resume) { + error = sysc_runtime_resume(dev); + if (error) + dev_warn(dev, "noirq_resume failed: %i\n", error); + } + + ddata->needs_resume = 0; + + return error; } static const struct dev_pm_ops sysc_pm_ops = { @@ -1408,9 +1454,9 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), /* Uarts on omap4 and later */ SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x50411e03, 0xffff00ff, - SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), /* Quirks that need to be set based on the module address */ SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -ENODEV, 0x50000800, 0xffffffff, @@ -1459,6 +1505,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY), SYSC_QUIRK("tptc", 0, 0, -ENODEV, -ENODEV, 0x40007c00, 0xffffffff, SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY), + SYSC_QUIRK("sata", 0, 0xfc, 0x1100, -ENODEV, 0x5e412000, 0xffffffff, + SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY), SYSC_QUIRK("usb_host_hs", 0, 0, 0x10, 0x14, 0x50700100, 0xffffffff, SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY), SYSC_QUIRK("usb_host_hs", 0, 0, 0x10, -ENODEV, 0x50700101, 0xffffffff, @@ -1466,7 +1514,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { SYSC_QUIRK("usb_otg_hs", 0, 0x400, 0x404, 0x408, 0x00000050, 0xffffffff, SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY), SYSC_QUIRK("usb_otg_hs", 0, 0, 0x10, -ENODEV, 0x4ea2080d, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY), + SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY | + SYSC_QUIRK_REINIT_ON_RESUME), SYSC_QUIRK("wdt", 0, 0, 0x10, 0x14, 0x502a0500, 0xfffff0f0, SYSC_MODULE_QUIRK_WDT), /* PRUSS on am3, am4 and am5 */ @@ -1524,7 +1573,6 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x40000400, 0xffffffff, 0), SYSC_QUIRK("rfbi", 0x4832a800, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0), SYSC_QUIRK("rfbi", 0x58002000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0), - SYSC_QUIRK("sata", 0, 0xfc, 0x1100, -ENODEV, 0x5e412000, 0xffffffff, 0), SYSC_QUIRK("scm", 0, 0, 0x10, -ENODEV, 0x40000900, 0xffffffff, 0), SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x4e8b0100, 0xffffffff, 0), SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x4f000100, 0xffffffff, 0), diff --git a/drivers/soc/amlogic/meson-clk-measure.c b/drivers/soc/amlogic/meson-clk-measure.c index e1957476a006..6dd190270123 100644 --- a/drivers/soc/amlogic/meson-clk-measure.c +++ b/drivers/soc/amlogic/meson-clk-measure.c @@ -626,10 +626,8 @@ static int meson_msr_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(base)) { - dev_err(&pdev->dev, "io resource mapping failed\n"); + if (IS_ERR(base)) return PTR_ERR(base); - } priv->regmap = devm_regmap_init_mmio(&pdev->dev, base, &meson_clk_msr_regmap_config); diff --git a/drivers/tee/optee/call.c b/drivers/tee/optee/call.c index 6132cc8d014c..6e6eb836e9b6 100644 --- a/drivers/tee/optee/call.c +++ b/drivers/tee/optee/call.c @@ -220,6 +220,7 @@ int optee_open_session(struct tee_context *ctx, struct optee_msg_arg *msg_arg; phys_addr_t msg_parg; struct optee_session *sess = NULL; + uuid_t client_uuid; /* +2 for the meta parameters added below */ shm = get_msg_arg(ctx, arg->num_params + 2, &msg_arg, &msg_parg); @@ -240,10 +241,11 @@ int optee_open_session(struct tee_context *ctx, memcpy(&msg_arg->params[0].u.value, arg->uuid, sizeof(arg->uuid)); msg_arg->params[1].u.value.c = arg->clnt_login; - rc = tee_session_calc_client_uuid((uuid_t *)&msg_arg->params[1].u.value, - arg->clnt_login, arg->clnt_uuid); + rc = tee_session_calc_client_uuid(&client_uuid, arg->clnt_login, + arg->clnt_uuid); if (rc) goto out; + export_uuid(msg_arg->params[1].u.octets, &client_uuid); rc = optee_to_msg_param(msg_arg->params + 2, arg->num_params, param); if (rc) diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h index 81ff593ac4ec..e3d72d09c484 100644 --- a/drivers/tee/optee/optee_msg.h +++ b/drivers/tee/optee/optee_msg.h @@ -9,7 +9,7 @@ #include <linux/types.h> /* - * This file defines the OP-TEE message protocol used to communicate + * This file defines the OP-TEE message protocol (ABI) used to communicate * with an instance of OP-TEE running in secure world. * * This file is divided into two sections. @@ -144,9 +144,10 @@ struct optee_msg_param_value { * @tmem: parameter by temporary memory reference * @rmem: parameter by registered memory reference * @value: parameter by opaque value + * @octets: parameter by octet string * * @attr & OPTEE_MSG_ATTR_TYPE_MASK indicates if tmem, rmem or value is used in - * the union. OPTEE_MSG_ATTR_TYPE_VALUE_* indicates value, + * the union. OPTEE_MSG_ATTR_TYPE_VALUE_* indicates value or octets, * OPTEE_MSG_ATTR_TYPE_TMEM_* indicates @tmem and * OPTEE_MSG_ATTR_TYPE_RMEM_* indicates @rmem, * OPTEE_MSG_ATTR_TYPE_NONE indicates that none of the members are used. @@ -157,6 +158,7 @@ struct optee_msg_param { struct optee_msg_param_tmem tmem; struct optee_msg_param_rmem rmem; struct optee_msg_param_value value; + u8 octets[24]; } u; }; diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index fafc1beea504..9837fb011f2f 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -50,6 +50,7 @@ struct sysc_regbits { s8 emufree_shift; }; +#define SYSC_QUIRK_REINIT_ON_RESUME BIT(27) #define SYSC_QUIRK_GPMC_DEBUG BIT(26) #define SYSC_MODULE_QUIRK_ENA_RESETDONE BIT(25) #define SYSC_MODULE_QUIRK_PRUSS BIT(24) |