diff options
| -rw-r--r-- | drivers/ata/libata-acpi.c | 38 | ||||
| -rw-r--r-- | include/linux/libata.h | 6 |
2 files changed, 44 insertions, 0 deletions
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 43af2e06d446..dc9842ec6f06 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -297,6 +297,44 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf, } /** + * ata_acpi_cbl_80wire - Check for 80 wire cable + * @ap: Port to check + * + * Return 1 if the ACPI mode data for this port indicates the BIOS selected + * an 80wire mode. + */ + +int ata_acpi_cbl_80wire(struct ata_port *ap) +{ + struct ata_acpi_gtm gtm; + int valid = 0; + + /* No _GTM data, no information */ + if (ata_acpi_gtm(ap, >m) < 0) + return 0; + + /* Split timing, DMA enabled */ + if ((gtm.flags & 0x11) == 0x11 && gtm.drive[0].dma < 55) + valid |= 1; + if ((gtm.flags & 0x14) == 0x14 && gtm.drive[1].dma < 55) + valid |= 2; + /* Shared timing, DMA enabled */ + if ((gtm.flags & 0x11) == 0x01 && gtm.drive[0].dma < 55) + valid |= 1; + if ((gtm.flags & 0x14) == 0x04 && gtm.drive[0].dma < 55) + valid |= 2; + + /* Drive check */ + if ((valid & 1) && ata_dev_enabled(&ap->link.device[0])) + return 1; + if ((valid & 2) && ata_dev_enabled(&ap->link.device[1])) + return 1; + return 0; +} + +EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire); + +/** * taskfile_load_raw - send taskfile registers to host controller * @dev: target ATA device * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7) diff --git a/include/linux/libata.h b/include/linux/libata.h index 9295cd541ffc..382898ef6545 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -885,6 +885,12 @@ enum { ATA_TIMING_CYCLE | ATA_TIMING_UDMA, }; +/* libata-acpi.c */ +#ifdef CONFIG_ATA_ACPI +extern int ata_acpi_cbl_80wire(struct ata_port *ap); +#else +static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; } +#endif #ifdef CONFIG_PCI struct pci_bits { |