diff options
| -rw-r--r-- | drivers/i2c/i2c-core-base.c | 78 | ||||
| -rw-r--r-- | include/linux/i2c.h | 7 |
2 files changed, 3 insertions, 82 deletions
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index fdc6a9d1394e..54ffc8da40df 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -147,46 +147,6 @@ static int get_sda_gpio_value(struct i2c_adapter *adap) return gpiod_get_value_cansleep(adap->bus_recovery_info->sda_gpiod); } -static int i2c_get_gpios_for_recovery(struct i2c_adapter *adap) -{ - struct i2c_bus_recovery_info *bri = adap->bus_recovery_info; - struct device *dev = &adap->dev; - int ret = 0; - - ret = gpio_request_one(bri->scl_gpio, GPIOF_OPEN_DRAIN | - GPIOF_OUT_INIT_HIGH, "i2c-scl"); - if (ret) { - dev_warn(dev, "Can't get SCL gpio: %d\n", bri->scl_gpio); - return ret; - } - bri->scl_gpiod = gpio_to_desc(bri->scl_gpio); - - if (bri->get_sda) { - if (gpio_request_one(bri->sda_gpio, GPIOF_IN, "i2c-sda")) { - /* work without SDA polling */ - dev_warn(dev, "Can't get SDA gpio: %d. Not using SDA polling\n", - bri->sda_gpio); - bri->get_sda = NULL; - } - bri->sda_gpiod = gpio_to_desc(bri->sda_gpio); - } - - return ret; -} - -static void i2c_put_gpios_for_recovery(struct i2c_adapter *adap) -{ - struct i2c_bus_recovery_info *bri = adap->bus_recovery_info; - - if (bri->get_sda) { - gpio_free(bri->sda_gpio); - bri->sda_gpiod = NULL; - } - - gpio_free(bri->scl_gpio); - bri->scl_gpiod = NULL; -} - /* * We are generating clock pulses. ndelay() determines durating of clk pulses. * We will generate clock with rate 100 KHz and so duration of both clock levels @@ -195,7 +155,7 @@ static void i2c_put_gpios_for_recovery(struct i2c_adapter *adap) #define RECOVERY_NDELAY 5000 #define RECOVERY_CLK_CNT 9 -static int i2c_generic_recovery(struct i2c_adapter *adap) +int i2c_generic_scl_recovery(struct i2c_adapter *adap) { struct i2c_bus_recovery_info *bri = adap->bus_recovery_info; int i = 0, val = 1, ret = 0; @@ -237,28 +197,8 @@ static int i2c_generic_recovery(struct i2c_adapter *adap) return ret; } - -int i2c_generic_scl_recovery(struct i2c_adapter *adap) -{ - return i2c_generic_recovery(adap); -} EXPORT_SYMBOL_GPL(i2c_generic_scl_recovery); -int i2c_generic_gpio_recovery(struct i2c_adapter *adap) -{ - int ret; - - ret = i2c_get_gpios_for_recovery(adap); - if (ret) - return ret; - - ret = i2c_generic_recovery(adap); - i2c_put_gpios_for_recovery(adap); - - return ret; -} -EXPORT_SYMBOL_GPL(i2c_generic_gpio_recovery); - int i2c_recover_bus(struct i2c_adapter *adap) { if (!adap->bus_recovery_info) @@ -290,21 +230,7 @@ static void i2c_init_recovery(struct i2c_adapter *adap) return; } - /* Generic GPIO recovery */ - if (bri->recover_bus == i2c_generic_gpio_recovery) { - if (!gpio_is_valid(bri->scl_gpio)) { - err_str = "invalid SCL gpio"; - goto err; - } - - if (gpio_is_valid(bri->sda_gpio)) - bri->get_sda = get_sda_gpio_value; - else - bri->get_sda = NULL; - - bri->get_scl = get_scl_gpio_value; - bri->set_scl = set_scl_gpio_value; - } else if (bri->recover_bus == i2c_generic_scl_recovery) { + if (bri->recover_bus == i2c_generic_scl_recovery) { /* Generic SCL recovery */ if (!bri->set_scl || !bri->get_scl) { err_str = "no {get|set}_scl() found"; diff --git a/include/linux/i2c.h b/include/linux/i2c.h index bf62c4a97a09..a556db976fc6 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -485,7 +485,7 @@ struct i2c_timings { /** * struct i2c_bus_recovery_info - I2C bus recovery information * @recover_bus: Recover routine. Either pass driver's recover_bus() routine, or - * i2c_generic_scl_recovery() or i2c_generic_gpio_recovery(). + * i2c_generic_scl_recovery(). * @get_scl: This gets current value of SCL line. Mandatory for generic SCL * recovery. Used internally for generic GPIO recovery. * @set_scl: This sets/clears SCL line. Mandatory for generic SCL recovery. Used @@ -497,8 +497,6 @@ struct i2c_timings { * configure padmux here for SDA/SCL line or something else they want. * @unprepare_recovery: This will be called after completing recovery. Platform * may configure padmux here for SDA/SCL line or something else they want. - * @scl_gpio: gpio number of the SCL line. Only required for GPIO recovery. - * @sda_gpio: gpio number of the SDA line. Only required for GPIO recovery. * @scl_gpiod: gpiod of the SCL line. Only required for GPIO recovery. * @sda_gpiod: gpiod of the SDA line. Only required for GPIO recovery. */ @@ -513,8 +511,6 @@ struct i2c_bus_recovery_info { void (*unprepare_recovery)(struct i2c_adapter *); /* gpio recovery */ - int scl_gpio; - int sda_gpio; struct gpio_desc *scl_gpiod; struct gpio_desc *sda_gpiod; }; @@ -522,7 +518,6 @@ struct i2c_bus_recovery_info { int i2c_recover_bus(struct i2c_adapter *adap); /* Generic recovery routines */ -int i2c_generic_gpio_recovery(struct i2c_adapter *adap); int i2c_generic_scl_recovery(struct i2c_adapter *adap); /** |