diff options
| -rw-r--r-- | Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt | 23 | ||||
| -rw-r--r-- | drivers/phy/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/phy/Makefile | 1 | ||||
| -rw-r--r-- | drivers/phy/phy-bcm-ns-usb3.c | 274 |
4 files changed, 307 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt new file mode 100644 index 000000000000..09aeba94538d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt @@ -0,0 +1,23 @@ +Driver for Broadcom Northstar USB 3.0 PHY + +Required properties: + +- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy". +- reg: register mappings for DMP (Device Management Plugin) and ChipCommon B + MMI. +- reg-names: "dmp" and "ccb-mii" + +Initialization of USB 3.0 PHY depends on Northstar version. There are currently +three known series: Ax, Bx and Cx. +Known A0: BCM4707 rev 0 +Known B0: BCM4707 rev 4, BCM53573 rev 2 +Known B1: BCM4707 rev 6 +Known C0: BCM47094 rev 0 + +Example: + usb3-phy { + compatible = "brcm,ns-ax-usb3-phy"; + reg = <0x18105000 0x1000>, <0x18003000 0x1000>; + reg-names = "dmp", "ccb-mii"; + #phy-cells = <0>; + }; diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 19bff3a10f69..afbdd6a9b964 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -24,6 +24,15 @@ config PHY_BCM_NS_USB2 Enable this to support Broadcom USB 2.0 PHY connected to the USB controller on Northstar family. +config PHY_BCM_NS_USB3 + tristate "Broadcom Northstar USB 3.0 PHY Driver" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on HAS_IOMEM && OF + select GENERIC_PHY + help + Enable this to support Broadcom USB 3.0 PHY connected to the USB + controller on Northstar family. + config PHY_BERLIN_USB tristate "Marvell Berlin USB PHY Driver" depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 90ae19879b0a..b99370a14ed9 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_GENERIC_PHY) += phy-core.o obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o +obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o diff --git a/drivers/phy/phy-bcm-ns-usb3.c b/drivers/phy/phy-bcm-ns-usb3.c new file mode 100644 index 000000000000..f420fa4bebfc --- /dev/null +++ b/drivers/phy/phy-bcm-ns-usb3.c @@ -0,0 +1,274 @@ +/* + * Broadcom Northstar USB 3.0 PHY Driver + * + * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl> + * + * All magic values used for initialization (and related comments) were obtained + * from Broadcom's SDK: + * Copyright (c) Broadcom Corp, 2012 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/bcma/bcma.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/slab.h> + +#define BCM_NS_USB3_MII_MNG_TIMEOUT_US 1000 /* usecs */ + +enum bcm_ns_family { + BCM_NS_UNKNOWN, + BCM_NS_AX, + BCM_NS_BX, +}; + +struct bcm_ns_usb3 { + struct device *dev; + enum bcm_ns_family family; + void __iomem *dmp; + void __iomem *ccb_mii; + struct phy *phy; +}; + +static const struct of_device_id bcm_ns_usb3_id_table[] = { + { + .compatible = "brcm,ns-ax-usb3-phy", + .data = (int *)BCM_NS_AX, + }, + { + .compatible = "brcm,ns-bx-usb3-phy", + .data = (int *)BCM_NS_BX, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table); + +static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr, + u32 mask, u32 value, unsigned long timeout) +{ + unsigned long deadline = jiffies + timeout; + u32 val; + + do { + val = readl(addr); + if ((val & mask) == value) + return 0; + cpu_relax(); + udelay(10); + } while (!time_after_eq(jiffies, deadline)); + + dev_err(usb3->dev, "Timeout waiting for register %p\n", addr); + + return -EBUSY; +} + +static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3) +{ + return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL, + 0x0100, 0x0000, + usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US)); +} + +static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value) +{ + int err; + + err = bcm_ns_usb3_mii_mng_wait_idle(usb3); + if (err < 0) { + dev_err(usb3->dev, "Couldn't write 0x%08x value\n", value); + return err; + } + + writel(value, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA); + + return 0; +} + +static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3) +{ + int err; + + /* Enable MDIO. Setting MDCDIV as 26 */ + writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL); + + /* Wait for MDIO? */ + udelay(2); + + /* USB3 PLL Block */ + err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000); + if (err < 0) + return err; + + /* Assert Ana_Pllseq start */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x58061000); + + /* Assert CML Divider ratio to 26 */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400); + + /* Asserting PLL Reset */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x582ec000); + + /* Deaaserting PLL Reset */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x582e8000); + + /* Waiting MII Mgt interface idle */ + bcm_ns_usb3_mii_mng_wait_idle(usb3); + + /* Deasserting USB3 system reset */ + writel(0, usb3->dmp + BCMA_RESET_CTL); + + /* PLL frequency monitor enable */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x58069000); + + /* PIPE Block */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8060); + + /* CMPMAX & CMPMINTH setting */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x580af30d); + + /* DEGLITCH MIN & MAX setting */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x580e6302); + + /* TXPMD block */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040); + + /* Enabling SSC */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003); + + /* Waiting MII Mgt interface idle */ + bcm_ns_usb3_mii_mng_wait_idle(usb3); + + return 0; +} + +static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3) +{ + int err; + + /* Enable MDIO. Setting MDCDIV as 26 */ + writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL); + + /* Wait for MDIO? */ + udelay(2); + + /* PLL30 block */ + err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000); + if (err < 0) + return err; + + bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400); + + bcm_ns_usb3_mii_mng_write32(usb3, 0x587e80e0); + + bcm_ns_usb3_mii_mng_write32(usb3, 0x580a009c); + + /* Enable SSC */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040); + + bcm_ns_usb3_mii_mng_write32(usb3, 0x580a21d3); + + bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003); + + /* Waiting MII Mgt interface idle */ + bcm_ns_usb3_mii_mng_wait_idle(usb3); + + /* Deasserting USB3 system reset */ + writel(0, usb3->dmp + BCMA_RESET_CTL); + + return 0; +} + +static int bcm_ns_usb3_phy_init(struct phy *phy) +{ + struct bcm_ns_usb3 *usb3 = phy_get_drvdata(phy); + int err; + + /* Perform USB3 system soft reset */ + writel(BCMA_RESET_CTL_RESET, usb3->dmp + BCMA_RESET_CTL); + + switch (usb3->family) { + case BCM_NS_AX: + err = bcm_ns_usb3_phy_init_ns_ax(usb3); + break; + case BCM_NS_BX: + err = bcm_ns_usb3_phy_init_ns_bx(usb3); + break; + default: + WARN_ON(1); + err = -ENOTSUPP; + } + + return err; +} + +static const struct phy_ops ops = { + .init = bcm_ns_usb3_phy_init, + .owner = THIS_MODULE, +}; + +static int bcm_ns_usb3_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct of_device_id *of_id; + struct bcm_ns_usb3 *usb3; + struct resource *res; + struct phy_provider *phy_provider; + + usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL); + if (!usb3) + return -ENOMEM; + + usb3->dev = dev; + + of_id = of_match_device(bcm_ns_usb3_id_table, dev); + if (!of_id) + return -EINVAL; + usb3->family = (enum bcm_ns_family)of_id->data; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmp"); + usb3->dmp = devm_ioremap_resource(dev, res); + if (IS_ERR(usb3->dmp)) { + dev_err(dev, "Failed to map DMP regs\n"); + return PTR_ERR(usb3->dmp); + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ccb-mii"); + usb3->ccb_mii = devm_ioremap_resource(dev, res); + if (IS_ERR(usb3->ccb_mii)) { + dev_err(dev, "Failed to map ChipCommon B MII regs\n"); + return PTR_ERR(usb3->ccb_mii); + } + + usb3->phy = devm_phy_create(dev, NULL, &ops); + if (IS_ERR(usb3->phy)) { + dev_err(dev, "Failed to create PHY\n"); + return PTR_ERR(usb3->phy); + } + + phy_set_drvdata(usb3->phy, usb3); + platform_set_drvdata(pdev, usb3); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (!IS_ERR(phy_provider)) + dev_info(dev, "Registered Broadcom Northstar USB 3.0 PHY driver\n"); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver bcm_ns_usb3_driver = { + .probe = bcm_ns_usb3_probe, + .driver = { + .name = "bcm_ns_usb3", + .of_match_table = bcm_ns_usb3_id_table, + }, +}; +module_platform_driver(bcm_ns_usb3_driver); + +MODULE_LICENSE("GPL v2"); |