diff options
| -rw-r--r-- | drivers/media/video/gspca/ov519.c | 159 |
1 files changed, 59 insertions, 100 deletions
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 30e91c365ea4..4d6a762a6f3d 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -3501,7 +3501,8 @@ static int ov519_mode_init_regs(struct sd *sd) static int mode_init_ov_sensor_regs(struct sd *sd) { struct gspca_dev *gspca_dev; - int qvga; + int qvga, xstart, xend, ystart, yend; + __u8 v; gspca_dev = &sd->gspca_dev; qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1; @@ -3517,9 +3518,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd) i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0); i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20); return 0; - case SEN_OV3610: { - int xstart, xend, ystart, yend; - + case SEN_OV3610: if (qvga) { xstart = (1040 - gspca_dev->width) / 2 + (0x1f << 4); ystart = (776 - gspca_dev->height) / 2; @@ -3543,13 +3542,19 @@ static int mode_init_ov_sensor_regs(struct sd *sd) i2c_w(sd, 0x19, ystart >> 3); i2c_w(sd, 0x1a, yend >> 3); return 0; - } case SEN_OV8610: /* For OV8610 qvga means qsvga */ i2c_w_mask(sd, OV7610_REG_COM_C, qvga ? (1 << 5) : 0, 1 << 5); + i2c_w_mask(sd, 0x13, 0x00, 0x20); /* Select 16 bit data bus */ + i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */ + i2c_w_mask(sd, 0x2d, 0x00, 0x40); /* from windrv 090403 */ + i2c_w_mask(sd, 0x28, 0x20, 0x20); /* progressive mode on */ break; case SEN_OV7610: i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); + i2c_w(sd, 0x35, qvga?0x1e:0x9e); + i2c_w_mask(sd, 0x13, 0x00, 0x20); /* Select 16 bit data bus */ + i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */ break; case SEN_OV7620: case SEN_OV76BE: @@ -3560,6 +3565,10 @@ static int mode_init_ov_sensor_regs(struct sd *sd) i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40); i2c_w_mask(sd, 0x67, qvga ? 0xb0 : 0x90, 0xf0); i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20); + i2c_w_mask(sd, 0x13, 0x00, 0x20); /* Select 16 bit data bus */ + i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */ + if (sd->sensor == SEN_OV76BE) + i2c_w(sd, 0x35, qvga ? 0x1e : 0x9e); break; case SEN_OV7640: i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); @@ -3569,6 +3578,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd) /* i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40); */ /* i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0); */ /* i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20); */ + i2c_w_mask(sd, 0x12, 0x04, 0x04); /* AWB: 1 */ break; case SEN_OV7670: /* set COM7_FMT_VGA or COM7_FMT_QVGA @@ -3577,55 +3587,56 @@ static int mode_init_ov_sensor_regs(struct sd *sd) i2c_w_mask(sd, OV7670_REG_COM7, qvga ? OV7670_COM7_FMT_QVGA : OV7670_COM7_FMT_VGA, OV7670_COM7_FMT_MASK); + i2c_w_mask(sd, 0x13, 0x00, 0x20); /* Select 16 bit data bus */ + i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_AWB, + OV7670_COM8_AWB); + if (qvga) { /* QVGA from ov7670.c by + * Jonathan Corbet */ + xstart = 164; + xend = 28; + ystart = 14; + yend = 494; + } else { /* VGA */ + xstart = 158; + xend = 14; + ystart = 10; + yend = 490; + } + /* OV7670 hardware window registers are split across + * multiple locations */ + i2c_w(sd, OV7670_REG_HSTART, xstart >> 3); + i2c_w(sd, OV7670_REG_HSTOP, xend >> 3); + v = i2c_r(sd, OV7670_REG_HREF); + v = (v & 0xc0) | ((xend & 0x7) << 3) | (xstart & 0x07); + msleep(10); /* need to sleep between read and write to + * same reg! */ + i2c_w(sd, OV7670_REG_HREF, v); + + i2c_w(sd, OV7670_REG_VSTART, ystart >> 2); + i2c_w(sd, OV7670_REG_VSTOP, yend >> 2); + v = i2c_r(sd, OV7670_REG_VREF); + v = (v & 0xc0) | ((yend & 0x3) << 2) | (ystart & 0x03); + msleep(10); /* need to sleep between read and write to + * same reg! */ + i2c_w(sd, OV7670_REG_VREF, v); break; case SEN_OV6620: + i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); + i2c_w_mask(sd, 0x13, 0x00, 0x20); /* Select 16 bit data bus */ + i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */ + break; case SEN_OV6630: case SEN_OV66308AF: i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); + i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */ break; default: return -EINVAL; } - /******** Palette-specific regs ********/ - - /* The OV518 needs special treatment. Although both the OV518 - * and the OV6630 support a 16-bit video bus, only the 8 bit Y - * bus is actually used. The UV bus is tied to ground. - * Therefore, the OV6630 needs to be in 8-bit multiplexed - * output mode */ - - /* OV7640 is 8-bit only */ - - if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV66308AF && - sd->sensor != SEN_OV7640) - i2c_w_mask(sd, 0x13, 0x00, 0x20); - /******** Clock programming ********/ i2c_w(sd, 0x11, sd->clockdiv); - /******** Special Features ********/ -/* no evidence this is possible with OV7670, either */ - /* Test Pattern */ - if (sd->sensor != SEN_OV7640 && sd->sensor != SEN_OV7670) - i2c_w_mask(sd, 0x12, 0x00, 0x02); - - /* Enable auto white balance */ - if (sd->sensor == SEN_OV7670) - i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_AWB, - OV7670_COM8_AWB); - else - i2c_w_mask(sd, 0x12, 0x04, 0x04); - - /* This will go away as soon as ov51x_mode_init_sensor_regs() */ - /* is fully tested. */ - /* 7620/6620/6630? don't have register 0x35, so play it safe */ - if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) { - if (!qvga) - i2c_w(sd, 0x35, 0x9e); - else - i2c_w(sd, 0x35, 0x1e); - } return 0; } @@ -3648,11 +3659,11 @@ static int set_ov_sensor_window(struct sd *sd) struct gspca_dev *gspca_dev; int qvga, crop; int hwsbase, hwebase, vwsbase, vwebase, hwscale, vwscale; - int ret, hstart, hstop, vstop, vstart; - __u8 v; + int ret; /* mode setup is fully handled in mode_init_ov_sensor_regs for these */ - if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610) + if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610 || + sd->sensor == SEN_OV7670) return mode_init_ov_sensor_regs(sd); gspca_dev = &sd->gspca_dev; @@ -3701,11 +3712,6 @@ static int set_ov_sensor_window(struct sd *sd) hwebase = 0x1a; vwsbase = vwebase = 0x03; break; - case SEN_OV7670: - /*handling of OV7670 hardware sensor start and stop values - * is very odd, compared to the other OV sensors */ - vwsbase = vwebase = hwebase = hwsbase = 0x00; - break; default: return -EINVAL; } @@ -3746,58 +3752,11 @@ static int set_ov_sensor_window(struct sd *sd) if (ret < 0) return ret; - if (sd->sensor == SEN_OV8610) { - i2c_w_mask(sd, 0x2d, 0x05, 0x40); - /* old 0x95, new 0x05 from windrv 090403 */ - /* bits 5-7: reserved */ - i2c_w_mask(sd, 0x28, 0x20, 0x20); - /* bit 5: progressive mode on */ - } - - /* The below is wrong for OV7670s because their window registers - * only store the high bits in 0x17 to 0x1a */ - - /* SRH Use sd->max values instead of requested win values */ - /* SCS Since we're sticking with only the max hardware widths - * for a given mode */ - /* I can hard code this for OV7670s */ - /* Yes, these numbers do look odd, but they're tested and work! */ - if (sd->sensor == SEN_OV7670) { - if (qvga) { /* QVGA from ov7670.c by - * Jonathan Corbet */ - hstart = 164; - hstop = 28; - vstart = 14; - vstop = 494; - } else { /* VGA */ - hstart = 158; - hstop = 14; - vstart = 10; - vstop = 490; - } - /* OV7670 hardware window registers are split across - * multiple locations */ - i2c_w(sd, OV7670_REG_HSTART, hstart >> 3); - i2c_w(sd, OV7670_REG_HSTOP, hstop >> 3); - v = i2c_r(sd, OV7670_REG_HREF); - v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x07); - msleep(10); /* need to sleep between read and write to - * same reg! */ - i2c_w(sd, OV7670_REG_HREF, v); + i2c_w(sd, 0x17, hwsbase); + i2c_w(sd, 0x18, hwebase + (sd->gspca_dev.width >> hwscale)); + i2c_w(sd, 0x19, vwsbase); + i2c_w(sd, 0x1a, vwebase + (sd->gspca_dev.height >> vwscale)); - i2c_w(sd, OV7670_REG_VSTART, vstart >> 2); - i2c_w(sd, OV7670_REG_VSTOP, vstop >> 2); - v = i2c_r(sd, OV7670_REG_VREF); - v = (v & 0xc0) | ((vstop & 0x3) << 2) | (vstart & 0x03); - msleep(10); /* need to sleep between read and write to - * same reg! */ - i2c_w(sd, OV7670_REG_VREF, v); - } else { - i2c_w(sd, 0x17, hwsbase); - i2c_w(sd, 0x18, hwebase + (sd->gspca_dev.width >> hwscale)); - i2c_w(sd, 0x19, vwsbase); - i2c_w(sd, 0x1a, vwebase + (sd->gspca_dev.height >> vwscale)); - } return 0; } |