aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/coresight.txt35
-rw-r--r--Documentation/devicetree/bindings/arm/l2c2x0.txt4
-rw-r--r--Documentation/devicetree/bindings/i2c/trivial-devices.txt8
-rw-r--r--Documentation/devicetree/bindings/mfd/da9052-i2c.txt22
-rw-r--r--Documentation/devicetree/bindings/net/cavium-pip.txt6
-rw-r--r--Documentation/devicetree/bindings/net/dsa/dsa.txt2
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/fman.txt4
-rw-r--r--Documentation/devicetree/bindings/regmap/regmap.txt2
-rw-r--r--Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt4
-rw-r--r--Documentation/devicetree/bindings/sound/simple-card.txt2
-rw-r--r--Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt2
-rw-r--r--arch/arc/kernel/setup.c7
-rw-r--r--arch/arm/boot/dts/imx28-m28.dtsi2
-rw-r--r--arch/arm/boot/dts/imx51-ts4800.dts2
-rw-r--r--arch/arm/boot/dts/imx53-m53.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts2
-rw-r--r--arch/arm/boot/dts/socfpga_cyclone5_socrates.dts2
-rw-r--r--arch/arm/kernel/setup.c8
-rw-r--r--arch/arm/mach-artpec/board-artpec6.c3
-rw-r--r--arch/arm/mach-at91/at91rm9200.c2
-rw-r--r--arch/arm/mach-at91/at91sam9.c2
-rw-r--r--arch/arm/mach-at91/sama5.c2
-rw-r--r--arch/arm/mach-bcm/board_bcm21664.c2
-rw-r--r--arch/arm/mach-bcm/board_bcm281xx.c2
-rw-r--r--arch/arm/mach-bcm/board_bcm2835.c10
-rw-r--r--arch/arm/mach-cns3xxx/core.c3
-rw-r--r--arch/arm/mach-exynos/exynos.c3
-rw-r--r--arch/arm/mach-highbank/highbank.c3
-rw-r--r--arch/arm/mach-imx/mach-imx51.c2
-rw-r--r--arch/arm/mach-imx/mach-imx53.c2
-rw-r--r--arch/arm/mach-imx/mach-imx6q.c2
-rw-r--r--arch/arm/mach-imx/mach-imx6sl.c2
-rw-r--r--arch/arm/mach-imx/mach-imx6sx.c2
-rw-r--r--arch/arm/mach-imx/mach-imx6ul.c1
-rw-r--r--arch/arm/mach-imx/mach-imx7d.c1
-rw-r--r--arch/arm/mach-integrator/integrator_ap.c3
-rw-r--r--arch/arm/mach-integrator/integrator_cp.c3
-rw-r--r--arch/arm/mach-keystone/keystone.c1
-rw-r--r--arch/arm/mach-lpc32xx/phy3250.c3
-rw-r--r--arch/arm/mach-mvebu/board-v7.c3
-rw-r--r--arch/arm/mach-mvebu/dove.c2
-rw-r--r--arch/arm/mach-mvebu/kirkwood.c2
-rw-r--r--arch/arm/mach-mxs/mach-mxs.c3
-rw-r--r--arch/arm/mach-nspire/nspire.c3
-rw-r--r--arch/arm/mach-orion5x/board-dt.c3
-rw-r--r--arch/arm/mach-picoxcell/common.c2
-rw-r--r--arch/arm/mach-rockchip/rockchip.c1
-rw-r--r--arch/arm/mach-s3c24xx/mach-s3c2416-dt.c2
-rw-r--r--arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c3
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7740.c3
-rw-r--r--arch/arm/mach-shmobile/setup-sh73a0.c2
-rw-r--r--arch/arm/mach-spear/spear1310.c2
-rw-r--r--arch/arm/mach-spear/spear1340.c1
-rw-r--r--arch/arm/mach-spear/spear300.c3
-rw-r--r--arch/arm/mach-spear/spear310.c3
-rw-r--r--arch/arm/mach-spear/spear320.c3
-rw-r--r--arch/arm/mach-spear/spear6xx.c3
-rw-r--r--arch/arm/mach-tegra/tegra.c2
-rw-r--r--arch/arm/mach-u300/core.c3
-rw-r--r--arch/arm/mach-versatile/versatile_dt.c3
-rw-r--r--arch/arm/mach-vt8500/vt8500.c3
-rw-r--r--arch/arm/mach-zynq/common.c2
-rw-r--r--arch/arm64/kernel/setup.c15
-rw-r--r--arch/c6x/platforms/Makefile2
-rw-r--r--arch/c6x/platforms/platform.c17
-rw-r--r--arch/cris/kernel/setup.c8
-rw-r--r--arch/metag/kernel/setup.c5
-rw-r--r--arch/mips/ath79/setup.c2
-rw-r--r--arch/mips/jz4740/setup.c8
-rw-r--r--arch/mips/mti-sead3/sead3-setup.c8
-rw-r--r--arch/mips/pic32/pic32mzda/init.c3
-rw-r--r--arch/mips/pistachio/init.c13
-rw-r--r--arch/mips/xilfpga/init.c13
-rw-r--r--arch/nios2/platform/platform.c4
-rw-r--r--arch/powerpc/boot/dts/ac14xx.dts2
-rw-r--r--arch/powerpc/boot/dts/akebono.dts2
-rw-r--r--arch/powerpc/boot/dts/bluestone.dts2
-rw-r--r--arch/powerpc/boot/dts/canyonlands.dts2
-rw-r--r--arch/powerpc/boot/dts/currituck.dts2
-rw-r--r--arch/powerpc/boot/dts/fsl/mpc8569mds.dts2
-rw-r--r--arch/powerpc/boot/dts/fsl/p1022rdk.dts2
-rw-r--r--arch/powerpc/boot/dts/glacier.dts2
-rw-r--r--arch/powerpc/boot/dts/icon.dts2
-rw-r--r--arch/powerpc/boot/dts/mpc5121ads.dts2
-rw-r--r--arch/powerpc/boot/dts/mpc8349emitx.dts2
-rw-r--r--arch/powerpc/boot/dts/mpc836x_rdk.dts2
-rw-r--r--arch/powerpc/boot/dts/pdm360ng.dts2
-rw-r--r--arch/powerpc/boot/dts/sam440ep.dts2
-rw-r--r--arch/powerpc/boot/dts/xcalibur1501.dts2
-rw-r--r--arch/powerpc/boot/dts/xpedite5200.dts2
-rw-r--r--arch/powerpc/boot/dts/xpedite5200_xmon.dts2
-rw-r--r--arch/powerpc/boot/dts/xpedite5301.dts2
-rw-r--r--arch/powerpc/boot/dts/xpedite5330.dts2
-rw-r--r--arch/powerpc/boot/dts/xpedite5370.dts2
-rw-r--r--arch/sh/boards/of-generic.c16
-rw-r--r--arch/xtensa/kernel/setup.c3
-rw-r--r--drivers/bus/imx-weim.c5
-rw-r--r--drivers/bus/uniphier-system-bus.c3
-rw-r--r--drivers/iommu/of_iommu.c5
-rw-r--r--drivers/memory/omap-gpmc.c3
-rw-r--r--drivers/of/address.c49
-rw-r--r--drivers/of/base.c41
-rw-r--r--drivers/of/dynamic.c49
-rw-r--r--drivers/of/fdt.c25
-rw-r--r--drivers/of/fdt_address.c35
-rw-r--r--drivers/of/irq.c4
-rw-r--r--drivers/of/of_pci.c6
-rw-r--r--drivers/of/of_private.h3
-rw-r--r--drivers/of/of_reserved_mem.c22
-rw-r--r--drivers/of/overlay.c43
-rw-r--r--drivers/of/platform.c37
-rw-r--r--drivers/of/resolver.c8
-rw-r--r--drivers/of/unittest.c5
-rw-r--r--include/linux/of_iommu.h2
-rwxr-xr-xscripts/dtc/dt_to_config1213
-rwxr-xr-xscripts/dtc/dtx_diff2
116 files changed, 1521 insertions, 423 deletions
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index 93147c0c8a0e..fcbae6a5e6c1 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -12,14 +12,33 @@ its hardware characteristcs.
* compatible: These have to be supplemented with "arm,primecell" as
drivers are using the AMBA bus interface. Possible values include:
- - "arm,coresight-etb10", "arm,primecell";
- - "arm,coresight-tpiu", "arm,primecell";
- - "arm,coresight-tmc", "arm,primecell";
- - "arm,coresight-funnel", "arm,primecell";
- - "arm,coresight-etm3x", "arm,primecell";
- - "arm,coresight-etm4x", "arm,primecell";
- - "qcom,coresight-replicator1x", "arm,primecell";
- - "arm,coresight-stm", "arm,primecell"; [1]
+ - Embedded Trace Buffer (version 1.0):
+ "arm,coresight-etb10", "arm,primecell";
+
+ - Trace Port Interface Unit:
+ "arm,coresight-tpiu", "arm,primecell";
+
+ - Trace Memory Controller, used for Embedded Trace Buffer(ETB),
+ Embedded Trace FIFO(ETF) and Embedded Trace Router(ETR)
+ configuration. The configuration mode (ETB, ETF, ETR) is
+ discovered at boot time when the device is probed.
+ "arm,coresight-tmc", "arm,primecell";
+
+ - Trace Funnel:
+ "arm,coresight-funnel", "arm,primecell";
+
+ - Embedded Trace Macrocell (version 3.x) and
+ Program Flow Trace Macrocell:
+ "arm,coresight-etm3x", "arm,primecell";
+
+ - Embedded Trace Macrocell (version 4.x):
+ "arm,coresight-etm4x", "arm,primecell";
+
+ - Qualcomm Configurable Replicator (version 1.x):
+ "qcom,coresight-replicator1x", "arm,primecell";
+
+ - System Trace Macrocell:
+ "arm,coresight-stm", "arm,primecell"; [1]
* reg: physical base address and length of the register
set(s) of the component.
diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.txt b/Documentation/devicetree/bindings/arm/l2c2x0.txt
index c453ab5553cd..917199f17965 100644
--- a/Documentation/devicetree/bindings/arm/l2c2x0.txt
+++ b/Documentation/devicetree/bindings/arm/l2c2x0.txt
@@ -86,10 +86,10 @@ Optional properties:
firmware)
- arm,dynamic-clock-gating : L2 dynamic clock gating. Value: <0> (forcibly
disable), <1> (forcibly enable), property absent (OS specific behavior,
- preferrably retain firmware settings)
+ preferably retain firmware settings)
- arm,standby-mode: L2 standby mode enable. Value <0> (forcibly disable),
<1> (forcibly enable), property absent (OS specific behavior,
- preferrably retain firmware settings)
+ preferably retain firmware settings)
Example:
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index a92d4f3e7044..5c70ce9c1954 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -146,10 +146,10 @@ samsung,24ad0xd1 S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
sgx,vz89x SGX Sensortech VZ89X Sensors
sii,s35390a 2-wire CMOS real-time clock
skyworks,sky81452 Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
-st-micro,24c256 i2c serial eeprom (24cxx)
-stm,m41t00 Serial Access TIMEKEEPER
-stm,m41t62 Serial real-time clock (RTC) with alarm
-stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS
+st,24c256 i2c serial eeprom (24cxx)
+st,m41t00 Serial real-time clock (RTC)
+st,m41t62 Serial real-time clock (RTC) with alarm
+st,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS
taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface
ti,ads7828 8-Channels, 12-bit ADC
ti,ads7830 8-Channels, 8-bit ADC
diff --git a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
index 1857f4a6b9a9..9554292dc6cb 100644
--- a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
+++ b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
@@ -8,10 +8,13 @@ Sub-nodes:
- regulators : Contain the regulator nodes. The DA9052/53 regulators are
bound using their names as listed below:
- buck0 : regulator BUCK0
- buck1 : regulator BUCK1
- buck2 : regulator BUCK2
- buck3 : regulator BUCK3
+ buck1 : regulator BUCK CORE
+ buck2 : regulator BUCK PRO
+ buck3 : regulator BUCK MEM
+ buck4 : regulator BUCK PERI
+ ldo1 : regulator LDO1
+ ldo2 : regulator LDO2
+ ldo3 : regulator LDO3
ldo4 : regulator LDO4
ldo5 : regulator LDO5
ldo6 : regulator LDO6
@@ -19,9 +22,6 @@ Sub-nodes:
ldo8 : regulator LDO8
ldo9 : regulator LDO9
ldo10 : regulator LDO10
- ldo11 : regulator LDO11
- ldo12 : regulator LDO12
- ldo13 : regulator LDO13
The bindings details of individual regulator device can be found in:
Documentation/devicetree/bindings/regulator/regulator.txt
@@ -36,22 +36,22 @@ i2c@63fc8000 { /* I2C1 */
reg = <0x48>;
regulators {
- buck0 {
+ buck1 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2075000>;
};
- buck1 {
+ buck2 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2075000>;
};
- buck2 {
+ buck3 {
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <2500000>;
};
- buck3 {
+ buck4 {
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <2500000>;
};
diff --git a/Documentation/devicetree/bindings/net/cavium-pip.txt b/Documentation/devicetree/bindings/net/cavium-pip.txt
index 7dbd158810d2..e3b8fe71762b 100644
--- a/Documentation/devicetree/bindings/net/cavium-pip.txt
+++ b/Documentation/devicetree/bindings/net/cavium-pip.txt
@@ -37,6 +37,12 @@ Properties for PIP port which is a child the PIP interface:
- phy-handle: Optional, see ethernet.txt file in the same directory.
+- rx-delay: Delay value for RGMII receive clock. Optional. Disabled if 0.
+ Value range is 1-31, and mapping to the actual delay varies depending on HW.
+
+- tx-delay: Delay value for RGMII transmit clock. Optional. Disabled if 0.
+ Value range is 1-31, and mapping to the actual delay varies depending on HW.
+
Example:
pip@11800a0000000 {
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
index 9bbbe7f87d67..a4a570fb2494 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.txt
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -317,7 +317,7 @@ Each port children node must have the following mandatory properties:
Note that a port labelled "dsa" will imply checking for the uplink phandle
described below.
-Optionnal property:
+Optional property:
- link : Should be a list of phandles to another switch's DSA port.
This property is only used when switches are being
chained/cascaded together. This port is used as outgoing port
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
index 55c2c03fc81e..df873d1f3b7c 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
@@ -35,7 +35,7 @@ PROPERTIES
Definition: Specifies the index of the FMan unit.
The cell-index value may be used by the SoC, to identify the
- FMan unit in the SoC memory map. In the table bellow,
+ FMan unit in the SoC memory map. In the table below,
there's a description of the cell-index use in each SoC:
- P1023:
@@ -247,7 +247,7 @@ PROPERTIES
The cell-index value may be used by the FMan or the SoC, to
identify the MAC unit in the FMan (or SoC) memory map.
- In the tables bellow there's a description of the cell-index
+ In the tables below there's a description of the cell-index
use, there are two tables, one describes the use of cell-index
by the FMan, the second describes the use by the SoC:
diff --git a/Documentation/devicetree/bindings/regmap/regmap.txt b/Documentation/devicetree/bindings/regmap/regmap.txt
index 0127be360fe8..873096be0278 100644
--- a/Documentation/devicetree/bindings/regmap/regmap.txt
+++ b/Documentation/devicetree/bindings/regmap/regmap.txt
@@ -14,7 +14,7 @@ architectures that typically run big-endian operating systems
be marked that way in the devicetree.
On SoCs that can be operated in both big-endian and little-endian
-modes, with a single hardware switch controlling both the endianess
+modes, with a single hardware switch controlling both the endianness
of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS
chips), "native-endian" is used to allow using the same device tree
blob in both cases.
diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
index 182777fac9a2..d5f73b8f614f 100644
--- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
+++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
@@ -28,10 +28,10 @@ Optional properties:
- dma-names: Should contain "tx" for transmit and "rx" for receive channels
- qcom,tx-crci: Identificator <u32> for Client Rate Control Interface to be
used with TX DMA channel. Required when using DMA for transmission
- with UARTDM v1.3 and bellow.
+ with UARTDM v1.3 and below.
- qcom,rx-crci: Identificator <u32> for Client Rate Control Interface to be
used with RX DMA channel. Required when using DMA for reception
- with UARTDM v1.3 and bellow.
+ with UARTDM v1.3 and below.
Note: Aliases may be defined to ensure the correct ordering of the UARTs.
The alias serialN will result in the UART being assigned port N. If any
diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt
index cf3979eb3578..59d862801e59 100644
--- a/Documentation/devicetree/bindings/sound/simple-card.txt
+++ b/Documentation/devicetree/bindings/sound/simple-card.txt
@@ -30,7 +30,7 @@ Optional subnodes:
sub-nodes. This container may be
omitted when the card has only one
DAI link. See the examples and the
- section bellow.
+ section below.
Dai-link subnode properties and subnodes:
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
index 27cfc7d7ccd7..8d6e4fd2468e 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
@@ -9,7 +9,7 @@ Required properties:
one)
- clocks: phandle to the source clock (usually the AHB clock)
-Optionnal properties:
+Optional properties:
- resets: phandle to a reset controller asserting the timer
Example:
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 5f8c0b47045a..a946400a86d0 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -15,7 +15,6 @@
#include <linux/cpu.h>
#include <linux/of_fdt.h>
#include <linux/of.h>
-#include <linux/of_platform.h>
#include <linux/cache.h>
#include <asm/sections.h>
#include <asm/arcregs.h>
@@ -436,12 +435,6 @@ void __init setup_arch(char **cmdline_p)
static int __init customize_machine(void)
{
- /*
- * Traverses flattened DeviceTree - registering platform devices
- * (if any) complete with their resources
- */
- of_platform_default_populate(NULL, NULL, NULL);
-
if (machine_desc->init_machine)
machine_desc->init_machine();
diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi
index 6cebaa6b8833..214bb1506b53 100644
--- a/arch/arm/boot/dts/imx28-m28.dtsi
+++ b/arch/arm/boot/dts/imx28-m28.dtsi
@@ -37,7 +37,7 @@
status = "okay";
rtc: rtc@68 {
- compatible = "stm,m41t62";
+ compatible = "st,m41t62";
reg = <0x68>;
};
};
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
index 0ff76a1bc0f1..30f44b5565b9 100644
--- a/arch/arm/boot/dts/imx51-ts4800.dts
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -102,7 +102,7 @@
status = "okay";
rtc: m41t00@68 {
- compatible = "stm,m41t00";
+ compatible = "st,m41t00";
reg = <0x68>;
};
};
diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi
index 87a7fc709c2d..d259f57bfd98 100644
--- a/arch/arm/boot/dts/imx53-m53.dtsi
+++ b/arch/arm/boot/dts/imx53-m53.dtsi
@@ -84,7 +84,7 @@
};
rtc: rtc@68 {
- compatible = "stm,m41t62";
+ compatible = "st,m41t62";
reg = <0x68>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index 364578d707a5..905907325f3b 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -282,7 +282,7 @@
};
rtc: m41t62@68 {
- compatible = "stm,m41t62";
+ compatible = "st,m41t62";
reg = <0x68>;
};
};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
index e1a61f20873f..d79853775061 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
@@ -52,7 +52,7 @@
status = "okay";
rtc: rtc@68 {
- compatible = "stm,m41t82";
+ compatible = "st,m41t82";
reg = <0x68>;
};
};
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 85a0bcb1f7ca..da2f6c360f6b 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -19,7 +19,6 @@
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/screen_info.h>
-#include <linux/of_iommu.h>
#include <linux/of_platform.h>
#include <linux/init.h>
#include <linux/kexec.h>
@@ -903,14 +902,9 @@ static int __init customize_machine(void)
* machine from the device tree, if no callback is provided,
* otherwise we would always need an init_machine callback.
*/
- of_iommu_init();
if (machine_desc->init_machine)
machine_desc->init_machine();
-#ifdef CONFIG_OF
- else
- of_platform_populate(NULL, of_default_bus_match_table,
- NULL, NULL);
-#endif
+
return 0;
}
arch_initcall(customize_machine);
diff --git a/arch/arm/mach-artpec/board-artpec6.c b/arch/arm/mach-artpec/board-artpec6.c
index 71513df3374e..a0b1979c2c2c 100644
--- a/arch/arm/mach-artpec/board-artpec6.c
+++ b/arch/arm/mach-artpec/board-artpec6.c
@@ -13,7 +13,6 @@
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/mfd/syscon.h>
-#include <linux/of_platform.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/clk-provider.h>
@@ -44,8 +43,6 @@ static void __init artpec6_init_machine(void)
regmap_write(regmap, ARTPEC6_DMACFG_REGNUM,
ARTPEC6_DMACFG_UARTS_BURST);
};
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static void artpec6_l2c310_write_sec(unsigned long val, unsigned reg)
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 63b4fa25b48a..d068ec3cd1f6 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -30,7 +30,7 @@ static void __init at91rm9200_dt_device_init(void)
if (soc != NULL)
soc_dev = soc_device_to_device(soc);
- of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
+ of_platform_default_populate(NULL, NULL, soc_dev);
at91rm9200_pm_init();
}
diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
index cada2a6412b3..ba28e9cc584d 100644
--- a/arch/arm/mach-at91/at91sam9.c
+++ b/arch/arm/mach-at91/at91sam9.c
@@ -61,7 +61,7 @@ static void __init at91sam9_common_init(void)
if (soc != NULL)
soc_dev = soc_device_to_device(soc);
- of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
+ of_platform_default_populate(NULL, NULL, soc_dev);
}
static void __init at91sam9_dt_device_init(void)
diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
index 922b85f07cd2..b272c45b400f 100644
--- a/arch/arm/mach-at91/sama5.c
+++ b/arch/arm/mach-at91/sama5.c
@@ -68,7 +68,7 @@ static void __init sama5_dt_device_init(void)
if (soc != NULL)
soc_dev = soc_device_to_device(soc);
- of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
+ of_platform_default_populate(NULL, NULL, soc_dev);
sama5_pm_init();
}
diff --git a/arch/arm/mach-bcm/board_bcm21664.c b/arch/arm/mach-bcm/board_bcm21664.c
index 82ad5687771f..0d7034c57334 100644
--- a/arch/arm/mach-bcm/board_bcm21664.c
+++ b/arch/arm/mach-bcm/board_bcm21664.c
@@ -12,7 +12,6 @@
*/
#include <linux/of_address.h>
-#include <linux/of_platform.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
@@ -60,7 +59,6 @@ static void bcm21664_restart(enum reboot_mode mode, const char *cmd)
static void __init bcm21664_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
kona_l2_cache_init();
}
diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c
index 2e367bd7c600..b81bb386951d 100644
--- a/arch/arm/mach-bcm/board_bcm281xx.c
+++ b/arch/arm/mach-bcm/board_bcm281xx.c
@@ -13,7 +13,6 @@
#include <linux/clocksource.h>
#include <linux/of_address.h>
-#include <linux/of_platform.h>
#include <asm/mach/arch.h>
@@ -58,7 +57,6 @@ static void bcm281xx_restart(enum reboot_mode mode, const char *cmd)
static void __init bcm281xx_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
kona_l2_cache_init();
}
diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c
index 834d67684e20..0c1edfc98696 100644
--- a/arch/arm/mach-bcm/board_bcm2835.c
+++ b/arch/arm/mach-bcm/board_bcm2835.c
@@ -15,7 +15,6 @@
#include <linux/init.h>
#include <linux/irqchip.h>
#include <linux/of_address.h>
-#include <linux/of_platform.h>
#include <linux/clk/bcm2835.h>
#include <asm/mach/arch.h>
@@ -23,16 +22,7 @@
static void __init bcm2835_init(void)
{
- int ret;
-
bcm2835_init_clocks();
-
- ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,
- NULL);
- if (ret) {
- pr_err("of_platform_populate failed: %d\n", ret);
- BUG();
- }
}
static const char * const bcm2835_compat[] = {
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index 9b1dc223d8d3..03da3813f1ab 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -395,8 +395,7 @@ static void __init cns3xxx_init(void)
pm_power_off = cns3xxx_power_off;
- of_platform_populate(NULL, of_default_bus_match_table,
- cns3xxx_auxdata, NULL);
+ of_platform_default_populate(NULL, cns3xxx_auxdata, NULL);
}
static const char *const cns3xxx_dt_compat[] __initconst = {
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 52ccf247e079..dea410adee7e 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -14,7 +14,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
-#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/irqchip.h>
#include <linux/soc/samsung/exynos-regs-pmu.h>
@@ -217,8 +216,6 @@ static void __init exynos_dt_machine_init(void)
of_machine_is_compatible("samsung,exynos3250") ||
of_machine_is_compatible("samsung,exynos5250"))
platform_device_register(&exynos_cpuidle);
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static char const *const exynos_dt_compat[] __initconst = {
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 6050a14faee6..07f60986dc2c 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -23,7 +23,6 @@
#include <linux/pl320-ipc.h>
#include <linux/of.h>
#include <linux/of_irq.h>
-#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/reboot.h>
#include <linux/amba/bus.h>
@@ -163,8 +162,6 @@ static void __init highbank_init(void)
pl320_ipc_register_notifier(&hb_keys_nb);
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
if (psci_ops.cpu_suspend)
platform_device_register(&highbank_cpuidle_device);
}
diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c
index 10a82a4f1e58..ec64de611d90 100644
--- a/arch/arm/mach-imx/mach-imx51.c
+++ b/arch/arm/mach-imx/mach-imx51.c
@@ -52,8 +52,6 @@ static void __init imx51_dt_init(void)
{
imx51_ipu_mipi_setup();
imx_src_init();
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static void __init imx51_init_late(void)
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 18b5c5c136db..68aec23be016 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -32,8 +32,6 @@ static void __init imx53_dt_init(void)
{
imx_src_init();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
imx_aips_allow_unprivileged_access("fsl,imx53-aipstz");
}
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index cb27d566d5ab..e3940707eeb8 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -278,7 +278,7 @@ static void __init imx6q_init_machine(void)
imx6q_enet_phy_init();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+ of_platform_default_populate(NULL, NULL, parent);
imx_anatop_init();
cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init();
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index 300326373166..37ae87d6e0e9 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -52,7 +52,7 @@ static void __init imx6sl_init_machine(void)
if (parent == NULL)
pr_warn("failed to initialize soc device\n");
- of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+ of_platform_default_populate(NULL, NULL, parent);
imx6sl_fec_init();
imx_anatop_init();
diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
index 6a0b0614de29..107cfc15282b 100644
--- a/arch/arm/mach-imx/mach-imx6sx.c
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -72,7 +72,7 @@ static void __init imx6sx_init_machine(void)
if (parent == NULL)
pr_warn("failed to initialize soc device\n");
- of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+ of_platform_default_populate(NULL, NULL, parent);
imx6sx_enet_init();
imx_anatop_init();
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index b56de4b8cdf2..5d9bfab279dd 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -64,7 +64,6 @@ static void __init imx6ul_init_machine(void)
if (parent == NULL)
pr_warn("failed to initialize soc device\n");
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
imx6ul_enet_init();
imx_anatop_init();
imx6ul_pm_init();
diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c
index b450f525a670..f388e6bd46ec 100644
--- a/arch/arm/mach-imx/mach-imx7d.c
+++ b/arch/arm/mach-imx/mach-imx7d.c
@@ -93,7 +93,6 @@ static void __init imx7d_init_machine(void)
if (parent == NULL)
pr_warn("failed to initialize soc device\n");
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
imx_anatop_init();
imx7d_enet_init();
}
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 2b118f20c62c..c7bb83205f5b 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -240,8 +240,7 @@ static void __init ap_init_of(void)
if (!ebi_base)
return;
- of_platform_populate(NULL, of_default_bus_match_table,
- ap_auxdata_lookup, NULL);
+ of_platform_default_populate(NULL, ap_auxdata_lookup, NULL);
sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET);
for (i = 0; i < 4; i++) {
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 6f6b051e81e0..825298349bf5 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -231,8 +231,7 @@ static void __init intcp_init_of(void)
if (!intcp_con_base)
return;
- of_platform_populate(NULL, of_default_bus_match_table,
- intcp_auxdata_lookup, NULL);
+ of_platform_default_populate(NULL, intcp_auxdata_lookup, NULL);
}
static const char * intcp_dt_board_compat[] = {
diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c
index a33a296b00dc..84613abf35a3 100644
--- a/arch/arm/mach-keystone/keystone.c
+++ b/arch/arm/mach-keystone/keystone.c
@@ -60,7 +60,6 @@ static void __init keystone_init(void)
bus_register_notifier(&platform_bus_type, &platform_nb);
}
keystone_pm_runtime_init();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static long long __init keystone_pv_fixup(void)
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 81265e80302d..0e4cbbe980eb 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -191,8 +191,7 @@ static void __init lpc3250_machine_init(void)
LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
LPC32XX_CLKPWR_TEST_CLK_SEL);
- of_platform_populate(NULL, of_default_bus_match_table,
- lpc32xx_auxdata_lookup, NULL);
+ of_platform_default_populate(NULL, lpc32xx_auxdata_lookup, NULL);
}
static const char *const lpc32xx_dt_compat[] __initconst = {
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index 1648edd515a2..ccca95173e17 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -16,7 +16,6 @@
#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
-#include <linux/of_platform.h>
#include <linux/io.h>
#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
@@ -144,8 +143,6 @@ static void __init mvebu_dt_init(void)
{
if (of_machine_is_compatible("marvell,armadaxp"))
i2c_quirk();
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char * const armada_370_xp_dt_compat[] __initconst = {
diff --git a/arch/arm/mach-mvebu/dove.c b/arch/arm/mach-mvebu/dove.c
index 1aebb82e3d7b..d076c5771adc 100644
--- a/arch/arm/mach-mvebu/dove.c
+++ b/arch/arm/mach-mvebu/dove.c
@@ -11,7 +11,6 @@
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/of.h>
-#include <linux/of_platform.h>
#include <linux/soc/dove/pmu.h>
#include <asm/hardware/cache-tauros2.h>
#include <asm/mach/arch.h>
@@ -26,7 +25,6 @@ static void __init dove_init(void)
#endif
BUG_ON(mvebu_mbus_dt_init(false));
dove_init_pmu();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char * const dove_dt_compat[] __initconst = {
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
index f9d8e1ea7183..8f459ee34e6f 100644
--- a/arch/arm/mach-mvebu/kirkwood.c
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -179,7 +179,7 @@ static void __init kirkwood_dt_init(void)
kirkwood_pm_init();
kirkwood_dt_eth_fixup();
- of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
+ of_platform_default_populate(NULL, auxdata, NULL);
}
static const char * const kirkwood_dt_board_compat[] __initconst = {
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index f1ea4700efcf..0b7fe74ff46d 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -498,8 +498,7 @@ static void __init mxs_machine_init(void)
else if (of_machine_is_compatible("msr,m28cu3"))
m28cu3_init();
- of_platform_populate(NULL, of_default_bus_match_table,
- NULL, parent);
+ of_platform_default_populate(NULL, NULL, parent);
mxs_restart_init();
diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c
index 34c2a1b32e7d..f0808fcc5acc 100644
--- a/arch/arm/mach-nspire/nspire.c
+++ b/arch/arm/mach-nspire/nspire.c
@@ -57,8 +57,7 @@ static struct of_dev_auxdata nspire_auxdata[] __initdata = {
static void __init nspire_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table,
- nspire_auxdata, NULL);
+ of_platform_default_populate(NULL, nspire_auxdata, NULL);
}
static void nspire_restart(enum reboot_mode mode, const char *cmd)
diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c
index 6f4c2c4ae2a5..3d36f1d95196 100644
--- a/arch/arm/mach-orion5x/board-dt.c
+++ b/arch/arm/mach-orion5x/board-dt.c
@@ -63,8 +63,7 @@ static void __init orion5x_dt_init(void)
if (of_machine_is_compatible("maxtor,shared-storage-2"))
mss2_init();
- of_platform_populate(NULL, of_default_bus_match_table,
- orion5x_auxdata_lookup, NULL);
+ of_platform_default_populate(NULL, orion5x_auxdata_lookup, NULL);
}
static const char *orion5x_dt_compat[] = {
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
index ec79fea82704..4e3d6d5c82cd 100644
--- a/arch/arm/mach-picoxcell/common.c
+++ b/arch/arm/mach-picoxcell/common.c
@@ -10,7 +10,6 @@
#include <linux/delay.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/of_platform.h>
#include <linux/reboot.h>
#include <asm/mach/arch.h>
@@ -54,7 +53,6 @@ static void __init picoxcell_map_io(void)
static void __init picoxcell_init_machine(void)
{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
picoxcell_setup_restart();
}
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index beb71da5d9c8..a7ab9ec141f8 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -73,7 +73,6 @@ static void __init rockchip_timer_init(void)
static void __init rockchip_dt_init(void)
{
rockchip_suspend_init();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char * const rockchip_board_dt_compat[] = {
diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
index 5f028ff84cfe..c83c076578dd 100644
--- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
+++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
@@ -17,7 +17,6 @@
#include <linux/clocksource.h>
#include <linux/irqchip.h>
-#include <linux/of_platform.h>
#include <linux/serial_s3c.h>
#include <asm/mach/arch.h>
@@ -35,7 +34,6 @@ static void __init s3c2416_dt_map_io(void)
static void __init s3c2416_dt_machine_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
s3c_pm_init();
}
diff --git a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
index bbf74edd3dd9..5bf9afae752d 100644
--- a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
+++ b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
@@ -8,8 +8,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/of_platform.h>
-
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
@@ -48,7 +46,6 @@ static void __init s3c64xx_dt_map_io(void)
static void __init s3c64xx_dt_init_machine(void)
{
samsung_wdt_reset_of_init();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static void s3c64xx_dt_restart(enum reboot_mode mode, const char *cmd)
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index db6dbfbaf9f1..3849eef0d3a7 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -18,7 +18,6 @@
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>
-#include <linux/of_platform.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
@@ -77,8 +76,6 @@ static void __init r8a7740_init_irq_of(void)
static void __init r8a7740_generic_init(void)
{
r8a7740_meram_workaround();
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *const r8a7740_boards_compat_dt[] __initconst = {
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 99a2004cac76..a25ff188e403 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -18,7 +18,6 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/of_platform.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/io.h>
@@ -55,7 +54,6 @@ static void __init sh73a0_generic_init(void)
/* Shared attribute override enable, 64K*8way */
l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
#endif
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *const sh73a0_boards_compat_dt[] __initconst = {
diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c
index cd5d375d91f0..a7d4f136836f 100644
--- a/arch/arm/mach-spear/spear1310.c
+++ b/arch/arm/mach-spear/spear1310.c
@@ -14,7 +14,6 @@
#define pr_fmt(fmt) "SPEAr1310: " fmt
#include <linux/amba/pl022.h>
-#include <linux/of_platform.h>
#include <linux/pata_arasan_cf_data.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -27,7 +26,6 @@
static void __init spear1310_dt_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
platform_device_register_simple("spear-cpufreq", -1, NULL, 0);
}
diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c
index 94594d5a446c..a212af90c0bc 100644
--- a/arch/arm/mach-spear/spear1340.c
+++ b/arch/arm/mach-spear/spear1340.c
@@ -19,7 +19,6 @@
static void __init spear1340_dt_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
platform_device_register_simple("spear-cpufreq", -1, NULL, 0);
}
diff --git a/arch/arm/mach-spear/spear300.c b/arch/arm/mach-spear/spear300.c
index 5b32edda2276..325b89579be1 100644
--- a/arch/arm/mach-spear/spear300.c
+++ b/arch/arm/mach-spear/spear300.c
@@ -194,8 +194,7 @@ static void __init spear300_dt_init(void)
pl080_plat_data.slave_channels = spear300_dma_info;
pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info);
- of_platform_populate(NULL, of_default_bus_match_table,
- spear300_auxdata_lookup, NULL);
+ of_platform_default_populate(NULL, spear300_auxdata_lookup, NULL);
}
static const char * const spear300_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear/spear310.c b/arch/arm/mach-spear/spear310.c
index 86a44ac7ff67..59e173dc85cf 100644
--- a/arch/arm/mach-spear/spear310.c
+++ b/arch/arm/mach-spear/spear310.c
@@ -236,8 +236,7 @@ static void __init spear310_dt_init(void)
pl080_plat_data.slave_channels = spear310_dma_info;
pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info);
- of_platform_populate(NULL, of_default_bus_match_table,
- spear310_auxdata_lookup, NULL);
+ of_platform_default_populate(NULL, spear310_auxdata_lookup, NULL);
}
static const char * const spear310_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear/spear320.c b/arch/arm/mach-spear/spear320.c
index d45d751926c5..0958f68a21e2 100644
--- a/arch/arm/mach-spear/spear320.c
+++ b/arch/arm/mach-spear/spear320.c
@@ -240,8 +240,7 @@ static void __init spear320_dt_init(void)
pl080_plat_data.slave_channels = spear320_dma_info;
pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info);
- of_platform_populate(NULL, of_default_bus_match_table,
- spear320_auxdata_lookup, NULL);
+ of_platform_default_populate(NULL, spear320_auxdata_lookup, NULL);
}
static const char * const spear320_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear/spear6xx.c b/arch/arm/mach-spear/spear6xx.c
index da26fa5b68d7..ccf3573b831c 100644
--- a/arch/arm/mach-spear/spear6xx.c
+++ b/arch/arm/mach-spear/spear6xx.c
@@ -411,8 +411,7 @@ struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
static void __init spear600_dt_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table,
- spear6xx_auxdata_lookup, NULL);
+ of_platform_default_populate(NULL, spear6xx_auxdata_lookup, NULL);
}
static const char *spear600_dt_board_compat[] = {
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index 2378fa560a21..6745a657d261 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -115,7 +115,7 @@ static void __init tegra_dt_init(void)
* devices
*/
out:
- of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+ of_platform_default_populate(NULL, NULL, parent);
}
static void __init paz00_init(void)
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 546338bbacf8..a4910ea6811a 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -391,8 +391,7 @@ static void __init u300_init_machine_dt(void)
pinctrl_register_mappings(u300_pinmux_map,
ARRAY_SIZE(u300_pinmux_map));
- of_platform_populate(NULL, of_default_bus_match_table,
- u300_auxdata_lookup, NULL);
+ of_platform_default_populate(NULL, u300_auxdata_lookup, NULL);
/* Enable SEMI self refresh */
val = readw(syscon_base + U300_SYSCON_SMCR) |
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index d643b9210dbd..3c8d39c12909 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -344,8 +344,7 @@ static void __init versatile_dt_init(void)
versatile_dt_pci_init();
- of_platform_populate(NULL, of_default_bus_match_table,
- versatile_auxdata_lookup, NULL);
+ of_platform_default_populate(NULL, versatile_auxdata_lookup, NULL);
}
static const char *const versatile_dt_match[] __initconst = {
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 3bc0dc9a4d69..773c04fdb746 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -30,7 +30,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <linux/of_platform.h>
#define LEGACY_GPIO_BASE 0xD8110000
#define LEGACY_PMC_BASE 0xD8130000
@@ -158,8 +157,6 @@ static void __init vt8500_init(void)
pm_power_off = &vt8500_power_off;
else
pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__);
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char * const vt8500_dt_compat[] = {
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index da876d28ccbc..d12002cd63bc 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -141,7 +141,7 @@ out:
* Finished with the static registrations now; fill in the missing
* devices
*/
- of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+ of_platform_default_populate(NULL, NULL, parent);
platform_device_register(&zynq_cpuidle_device);
}
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 2981f1bdd073..536dce22fe76 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -39,9 +39,7 @@
#include <linux/fs.h>
#include <linux/proc_fs.h>
#include <linux/memblock.h>
-#include <linux/of_iommu.h>
#include <linux/of_fdt.h>
-#include <linux/of_platform.h>
#include <linux/efi.h>
#include <linux/psci.h>
@@ -303,19 +301,6 @@ void __init setup_arch(char **cmdline_p)
}
}
-static int __init arm64_device_init(void)
-{
- if (of_have_populated_dt()) {
- of_iommu_init();
- of_platform_populate(NULL, of_default_bus_match_table,
- NULL, NULL);
- } else if (acpi_disabled) {
- pr_crit("Device tree not populated\n");
- }
- return 0;
-}
-arch_initcall_sync(arm64_device_init);
-
static int __init topology_init(void)
{
int i;
diff --git a/arch/c6x/platforms/Makefile b/arch/c6x/platforms/Makefile
index 9a95b9bca8d0..5f7d93468b6e 100644
--- a/arch/c6x/platforms/Makefile
+++ b/arch/c6x/platforms/Makefile
@@ -4,7 +4,7 @@
# Copyright 2010, 2011 Texas Instruments Incorporated
#
-obj-y = platform.o cache.o megamod-pic.o pll.o plldata.o timer64.o
+obj-y = cache.o megamod-pic.o pll.o plldata.o timer64.o
obj-y += dscr.o
# SoC objects
diff --git a/arch/c6x/platforms/platform.c b/arch/c6x/platforms/platform.c
deleted file mode 100644
index 26c1a355d600..000000000000
--- a/arch/c6x/platforms/platform.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright 2011 Texas Instruments Incorporated
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-static int __init c6x_device_probe(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
- return 0;
-}
-core_initcall(c6x_device_probe);
diff --git a/arch/cris/kernel/setup.c b/arch/cris/kernel/setup.c
index bb12aa93201d..4b4853d914e2 100644
--- a/arch/cris/kernel/setup.c
+++ b/arch/cris/kernel/setup.c
@@ -21,7 +21,6 @@
#include <linux/cpu.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
-#include <linux/of_platform.h>
#include <asm/setup.h>
#include <arch/system.h>
@@ -212,10 +211,3 @@ static int __init topology_init(void)
}
subsys_initcall(topology_init);
-
-static int __init cris_of_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
- return 0;
-}
-core_initcall(cris_of_init);
diff --git a/arch/metag/kernel/setup.c b/arch/metag/kernel/setup.c
index 31cf53d0eba2..1166f1fbfd63 100644
--- a/arch/metag/kernel/setup.c
+++ b/arch/metag/kernel/setup.c
@@ -20,7 +20,6 @@
#include <linux/memblock.h>
#include <linux/mm.h>
#include <linux/of_fdt.h>
-#include <linux/of_platform.h>
#include <linux/pfn.h>
#include <linux/root_dev.h>
#include <linux/sched.h>
@@ -414,9 +413,7 @@ static int __init customize_machine(void)
/* customizes platform devices, or adds new ones */
if (machine_desc->init_machine)
machine_desc->init_machine();
- else
- of_platform_populate(NULL, of_default_bus_match_table, NULL,
- NULL);
+
return 0;
}
arch_initcall(customize_machine);
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index 7adab180e0ca..3a0019deb7f7 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -18,7 +18,6 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
-#include <linux/of_platform.h>
#include <linux/of_fdt.h>
#include <asm/bootinfo.h>
@@ -285,7 +284,6 @@ void __init plat_time_init(void)
static int __init ath79_setup(void)
{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
if (mips_machtype == ATH79_MACH_GENERIC_OF)
return 0;
diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index 510fc0d962f2..0914ef775b5f 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -20,7 +20,6 @@
#include <linux/kernel.h>
#include <linux/libfdt.h>
#include <linux/of_fdt.h>
-#include <linux/of_platform.h>
#include <asm/bootinfo.h>
#include <asm/prom.h>
@@ -74,13 +73,6 @@ void __init device_tree_init(void)
unflatten_and_copy_device_tree();
}
-static int __init populate_machine(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
- return 0;
-}
-arch_initcall(populate_machine);
-
const char *get_system_type(void)
{
if (config_enabled(CONFIG_MACH_JZ4780))
diff --git a/arch/mips/mti-sead3/sead3-setup.c b/arch/mips/mti-sead3/sead3-setup.c
index 9f2f9b2b23ce..edfcaf06680d 100644
--- a/arch/mips/mti-sead3/sead3-setup.c
+++ b/arch/mips/mti-sead3/sead3-setup.c
@@ -8,7 +8,6 @@
*/
#include <linux/init.h>
#include <linux/libfdt.h>
-#include <linux/of_platform.h>
#include <linux/of_fdt.h>
#include <asm/prom.h>
@@ -107,10 +106,3 @@ void __init device_tree_init(void)
unflatten_and_copy_device_tree();
}
-
-static int __init customize_machine(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
- return 0;
-}
-arch_initcall(customize_machine);
diff --git a/arch/mips/pic32/pic32mzda/init.c b/arch/mips/pic32/pic32mzda/init.c
index 775ff90a9962..77ecf32ef3dc 100644
--- a/arch/mips/pic32/pic32mzda/init.c
+++ b/arch/mips/pic32/pic32mzda/init.c
@@ -147,8 +147,7 @@ static int __init plat_of_setup(void)
panic("Device tree not present");
pic32_of_prepare_platform_data(pic32_auxdata_lookup);
- if (of_platform_populate(NULL, of_default_bus_match_table,
- pic32_auxdata_lookup, NULL))
+ if (of_platform_default_populate(NULL, pic32_auxdata_lookup, NULL))
panic("Failed to populate DT");
return 0;
diff --git a/arch/mips/pistachio/init.c b/arch/mips/pistachio/init.c
index ab79828230ab..c50a670e60d2 100644
--- a/arch/mips/pistachio/init.c
+++ b/arch/mips/pistachio/init.c
@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
-#include <linux/of_platform.h>
#include <asm/cacheflush.h>
#include <asm/dma-coherence.h>
@@ -159,15 +158,3 @@ void __init device_tree_init(void)
unflatten_and_copy_device_tree();
}
-
-static int __init plat_of_setup(void)
-{
- if (!of_have_populated_dt())
- panic("Device tree not present");
-
- if (of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL))
- panic("Failed to populate DT");
-
- return 0;
-}
-arch_initcall(plat_of_setup);
diff --git a/arch/mips/xilfpga/init.c b/arch/mips/xilfpga/init.c
index ce2aee2169ac..602e384a26a2 100644
--- a/arch/mips/xilfpga/init.c
+++ b/arch/mips/xilfpga/init.c
@@ -10,7 +10,6 @@
*/
#include <linux/of_fdt.h>
-#include <linux/of_platform.h>
#include <asm/prom.h>
@@ -43,15 +42,3 @@ void __init device_tree_init(void)
unflatten_and_copy_device_tree();
}
-
-static int __init plat_of_setup(void)
-{
- if (!of_have_populated_dt())
- panic("Device tree not present");
-
- if (of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL))
- panic("Failed to populate DT");
-
- return 0;
-}
-arch_initcall(plat_of_setup);
diff --git a/arch/nios2/platform/platform.c b/arch/nios2/platform/platform.c
index d478773f758a..2a35154ca153 100644
--- a/arch/nios2/platform/platform.c
+++ b/arch/nios2/platform/platform.c
@@ -9,7 +9,6 @@
*/
#include <linux/init.h>
-#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/err.h>
@@ -39,8 +38,7 @@ static int __init nios2_soc_device_init(void)
}
}
- return of_platform_populate(NULL, of_default_bus_match_table,
- NULL, NULL);
+ return 0;
}
device_initcall(nios2_soc_device_init);
diff --git a/arch/powerpc/boot/dts/ac14xx.dts b/arch/powerpc/boot/dts/ac14xx.dts
index a1b883730b31..27fcabc2f857 100644
--- a/arch/powerpc/boot/dts/ac14xx.dts
+++ b/arch/powerpc/boot/dts/ac14xx.dts
@@ -231,7 +231,7 @@
};
rtc@68 {
- compatible = "stm,m41t00";
+ compatible = "st,m41t00";
reg = <0x68>;
};
};
diff --git a/arch/powerpc/boot/dts/akebono.dts b/arch/powerpc/boot/dts/akebono.dts
index f92ecfed3d2f..e61d5dc598c1 100644
--- a/arch/powerpc/boot/dts/akebono.dts
+++ b/arch/powerpc/boot/dts/akebono.dts
@@ -224,7 +224,7 @@
#address-cells = <1>;
#size-cells = <0>;
rtc@68 {
- compatible = "stm,m41t80", "m41st85";
+ compatible = "st,m41t80", "m41st85";
reg = <0x68>;
};
};
diff --git a/arch/powerpc/boot/dts/bluestone.dts b/arch/powerpc/boot/dts/bluestone.dts
index 7daaca324c01..b0b26d8d68a2 100644
--- a/arch/powerpc/boot/dts/bluestone.dts
+++ b/arch/powerpc/boot/dts/bluestone.dts
@@ -279,7 +279,7 @@
#address-cells = <1>;
#size-cells = <0>;
rtc@68 {
- compatible = "stm,m41t80";
+ compatible = "st,m41t80";
reg = <0x68>;
interrupt-parent = <&UIC0>;
interrupts = <0x9 0x8>;
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index 549c24c4c388..0d6ac92d0f5e 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -319,7 +319,7 @@
#address-cells = <1>;
#size-cells = <0>;
rtc@68 {
- compatible = "stm,m41t80";
+ compatible = "st,m41t80";
reg = <0x68>;
interrupt-parent = <&UIC2>;
interrupts = <0x19 0x8>;
diff --git a/arch/powerpc/boot/dts/currituck.dts b/arch/powerpc/boot/dts/currituck.dts
index d2c8a872308e..4191e1850ea1 100644
--- a/arch/powerpc/boot/dts/currituck.dts
+++ b/arch/powerpc/boot/dts/currituck.dts
@@ -116,7 +116,7 @@
#address-cells = <1>;
#size-cells = <0>;
rtc@68 {
- compatible = "stm,m41t80", "m41st85";
+ compatible = "st,m41t80", "m41st85";
reg = <0x68>;
};
};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8569mds.dts b/arch/powerpc/boot/dts/fsl/mpc8569mds.dts
index a95ff7d2392c..8e94448f296c 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8569mds.dts
@@ -232,7 +232,7 @@
mode = "cpu-qe";
serial-flash@0 {
- compatible = "stm,m25p40";
+ compatible = "st,m25p40";
reg = <0>;
spi-max-frequency = <25000000>;
};
diff --git a/arch/powerpc/boot/dts/fsl/p1022rdk.dts b/arch/powerpc/boot/dts/fsl/p1022rdk.dts
index d505d7c51903..29e8af1e3711 100644
--- a/arch/powerpc/boot/dts/fsl/p1022rdk.dts
+++ b/arch/powerpc/boot/dts/fsl/p1022rdk.dts
@@ -57,7 +57,7 @@
clock-frequency = <12288000>;
};
rtc@68 {
- compatible = "stm,m41t62";
+ compatible = "st,m41t62";
reg = <0x68>;
};
adt7461@4c{
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
index 2000060386d7..a7a802f4ffdd 100644
--- a/arch/powerpc/boot/dts/glacier.dts
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -287,7 +287,7 @@
#address-cells = <1>;
#size-cells = <0>;
rtc@68 {
- compatible = "stm,m41t80";
+ compatible = "st,m41t80";
reg = <0x68>;
interrupt-parent = <&UIC2>;
interrupts = <0x19 0x8>;
diff --git a/arch/powerpc/boot/dts/icon.dts b/arch/powerpc/boot/dts/icon.dts
index abcd0caeccae..9c94fd737f7c 100644
--- a/arch/powerpc/boot/dts/icon.dts
+++ b/arch/powerpc/boot/dts/icon.dts
@@ -256,7 +256,7 @@
#size-cells = <0>;
rtc@68 {
- compatible = "stm,m41t00";
+ compatible = "st,m41t00";
reg = <0x68>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index c228a0a232a6..75888ce2c792 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -99,7 +99,7 @@
};
rtc@68 {
- compatible = "stm,m41t62";
+ compatible = "st,m41t62";
reg = <0x68>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index cf8542401a3c..90aed3ac2f69 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -92,7 +92,7 @@
dfsrr;
eeprom: at24@50 {
- compatible = "st-micro,24c256";
+ compatible = "st,24c256";
reg = <0x50>;
};
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index daeacbdcf8b4..47c5fc64e433 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -416,7 +416,7 @@
gpios = <&qe_pio_e 18 0>;
flash {
- compatible = "stm,nand512-a";
+ compatible = "st,nand512-a";
};
};
diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts
index 871c16d1ad5e..0cec7244abe7 100644
--- a/arch/powerpc/boot/dts/pdm360ng.dts
+++ b/arch/powerpc/boot/dts/pdm360ng.dts
@@ -103,7 +103,7 @@
};
rtc@68 {
- compatible = "stm,m41t00";
+ compatible = "st,m41t00";
reg = <0x68>;
};
};
diff --git a/arch/powerpc/boot/dts/sam440ep.dts b/arch/powerpc/boot/dts/sam440ep.dts
index f0663be10421..088361cf4636 100644
--- a/arch/powerpc/boot/dts/sam440ep.dts
+++ b/arch/powerpc/boot/dts/sam440ep.dts
@@ -196,7 +196,7 @@
interrupt-parent = <&UIC0>;
interrupts = <2 4>;
rtc@68 {
- compatible = "stm,m41t80";
+ compatible = "st,m41t80";
reg = <0x68>;
};
};
diff --git a/arch/powerpc/boot/dts/xcalibur1501.dts b/arch/powerpc/boot/dts/xcalibur1501.dts
index c409cbafb126..1f2952dce77d 100644
--- a/arch/powerpc/boot/dts/xcalibur1501.dts
+++ b/arch/powerpc/boot/dts/xcalibur1501.dts
@@ -238,7 +238,7 @@
};
rtc@68 {
- compatible = "stm,m41t00",
+ compatible = "st,m41t00",
"dallas,ds1338";
reg = <0x68>;
};
diff --git a/arch/powerpc/boot/dts/xpedite5200.dts b/arch/powerpc/boot/dts/xpedite5200.dts
index 8fd7b7031357..5b10e56a1d8e 100644
--- a/arch/powerpc/boot/dts/xpedite5200.dts
+++ b/arch/powerpc/boot/dts/xpedite5200.dts
@@ -130,7 +130,7 @@
};
rtc@68 {
- compatible = "stm,m41t00",
+ compatible = "st,m41t00",
"dallas,ds1338";
reg = <0x68>;
};
diff --git a/arch/powerpc/boot/dts/xpedite5200_xmon.dts b/arch/powerpc/boot/dts/xpedite5200_xmon.dts
index 0baa8283d08c..646acfbef0dd 100644
--- a/arch/powerpc/boot/dts/xpedite5200_xmon.dts
+++ b/arch/powerpc/boot/dts/xpedite5200_xmon.dts
@@ -134,7 +134,7 @@
};
rtc@68 {
- compatible = "stm,m41t00",
+ compatible = "st,m41t00",
"dallas,ds1338";
reg = <0x68>;
};
diff --git a/arch/powerpc/boot/dts/xpedite5301.dts b/arch/powerpc/boot/dts/xpedite5301.dts
index 04cb410da48b..7bcc94ffe53d 100644
--- a/arch/powerpc/boot/dts/xpedite5301.dts
+++ b/arch/powerpc/boot/dts/xpedite5301.dts
@@ -231,7 +231,7 @@
};
rtc@68 {
- compatible = "stm,m41t00",
+ compatible = "st,m41t00",
"dallas,ds1338";
reg = <0x68>;
};
diff --git a/arch/powerpc/boot/dts/xpedite5330.dts b/arch/powerpc/boot/dts/xpedite5330.dts
index 73f8620f1ce7..86df8bc6ebbd 100644
--- a/arch/powerpc/boot/dts/xpedite5330.dts
+++ b/arch/powerpc/boot/dts/xpedite5330.dts
@@ -267,7 +267,7 @@
};
rtc@68 {
- compatible = "stm,m41t00",
+ compatible = "st,m41t00",
"dallas,ds1338";
reg = <0x68>;
};
diff --git a/arch/powerpc/boot/dts/xpedite5370.dts b/arch/powerpc/boot/dts/xpedite5370.dts
index cd0ea2b99362..b8ade094f932 100644
--- a/arch/powerpc/boot/dts/xpedite5370.dts
+++ b/arch/powerpc/boot/dts/xpedite5370.dts
@@ -229,7 +229,7 @@
};
rtc@68 {
- compatible = "stm,m41t00",
+ compatible = "st,m41t00",
"dallas,ds1338";
reg = <0x68>;
};
diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c
index bf3a166a5407..911ffb9f115b 100644
--- a/arch/sh/boards/of-generic.c
+++ b/arch/sh/boards/of-generic.c
@@ -9,9 +9,7 @@
*/
#include <linux/of.h>
-#include <linux/of_platform.h>
#include <linux/of_fdt.h>
-#include <linux/of_iommu.h>
#include <linux/clocksource.h>
#include <linux/irqchip.h>
#include <linux/clk-provider.h>
@@ -180,17 +178,3 @@ void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
void __init plat_irq_setup(void)
{
}
-
-static int __init sh_of_device_init(void)
-{
- pr_info("SH generic board support: populating platform devices\n");
- if (of_have_populated_dt()) {
- of_iommu_init();
- of_platform_populate(NULL, of_default_bus_match_table,
- NULL, NULL);
- } else {
- pr_crit("Device tree not populated\n");
- }
- return 0;
-}
-arch_initcall_sync(sh_of_device_init);
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 9735691f37f1..143251ede897 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -24,8 +24,8 @@
#include <linux/percpu.h>
#include <linux/clk-provider.h>
#include <linux/cpu.h>
+#include <linux/of.h>
#include <linux/of_fdt.h>
-#include <linux/of_platform.h>
#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
# include <linux/console.h>
@@ -255,7 +255,6 @@ void __init early_init_devtree(void *params)
static int __init xtensa_device_probe(void)
{
of_clk_init(NULL);
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
return 0;
}
diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c
index 1827fc4d15c1..4bd361d64270 100644
--- a/drivers/bus/imx-weim.c
+++ b/drivers/bus/imx-weim.c
@@ -163,9 +163,8 @@ static int __init weim_parse_dt(struct platform_device *pdev,
}
if (have_child)
- ret = of_platform_populate(pdev->dev.of_node,
- of_default_bus_match_table,
- NULL, &pdev->dev);
+ ret = of_platform_default_populate(pdev->dev.of_node,
+ NULL, &pdev->dev);
if (ret)
dev_err(&pdev->dev, "%s fail to create devices.\n",
pdev->dev.of_node->full_name);
diff --git a/drivers/bus/uniphier-system-bus.c b/drivers/bus/uniphier-system-bus.c
index 350b7309c26d..1e6e0269edcc 100644
--- a/drivers/bus/uniphier-system-bus.c
+++ b/drivers/bus/uniphier-system-bus.c
@@ -257,8 +257,7 @@ static int uniphier_system_bus_probe(struct platform_device *pdev)
uniphier_system_bus_set_reg(priv);
/* Now, the bus is configured. Populate platform_devices below it */
- return of_platform_populate(dev->of_node, of_default_bus_match_table,
- NULL, dev);
+ return of_platform_default_populate(dev->of_node, NULL, dev);
}
static const struct of_device_id uniphier_system_bus_match[] = {
diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c
index af499aea0a1a..57f23eaaa2f9 100644
--- a/drivers/iommu/of_iommu.c
+++ b/drivers/iommu/of_iommu.c
@@ -174,7 +174,7 @@ err_put_node:
return NULL;
}
-void __init of_iommu_init(void)
+static int __init of_iommu_init(void)
{
struct device_node *np;
const struct of_device_id *match, *matches = &__iommu_of_table;
@@ -186,4 +186,7 @@ void __init of_iommu_init(void)
pr_err("Failed to initialise IOMMU %s\n",
of_node_full_name(np));
}
+
+ return 0;
}
+postcore_initcall_sync(of_iommu_init);
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index 15508df24e5d..4721b591994f 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -2134,8 +2134,7 @@ no_timings:
/* is child a common bus? */
if (of_match_node(of_default_bus_match_table, child))
/* create children and other common bus children */
- if (of_platform_populate(child, of_default_bus_match_table,
- NULL, &pdev->dev))
+ if (of_platform_default_populate(child, NULL, &pdev->dev))
goto err_child_fail;
return 0;
diff --git a/drivers/of/address.c b/drivers/of/address.c
index 0a553c084a81..02b2903fe9d2 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -1,4 +1,6 @@
+#define pr_fmt(fmt) "OF: " fmt
+
#include <linux/device.h>
#include <linux/io.h>
#include <linux/ioport.h>
@@ -24,10 +26,10 @@ static int __of_address_to_resource(struct device_node *dev,
#ifdef DEBUG
static void of_dump_addr(const char *s, const __be32 *addr, int na)
{
- printk(KERN_DEBUG "%s", s);
+ pr_debug("%s", s);
while (na--)
- printk(" %08x", be32_to_cpu(*(addr++)));
- printk("\n");
+ pr_cont(" %08x", be32_to_cpu(*(addr++)));
+ pr_cont("\n");
}
#else
static void of_dump_addr(const char *s, const __be32 *addr, int na) { }
@@ -68,7 +70,7 @@ static u64 of_bus_default_map(__be32 *addr, const __be32 *range,
s = of_read_number(range + na + pna, ns);
da = of_read_number(addr, na);
- pr_debug("OF: default map, cp=%llx, s=%llx, da=%llx\n",
+ pr_debug("default map, cp=%llx, s=%llx, da=%llx\n",
(unsigned long long)cp, (unsigned long long)s,
(unsigned long long)da);
@@ -156,7 +158,7 @@ static u64 of_bus_pci_map(__be32 *addr, const __be32 *range, int na, int ns,
s = of_read_number(range + na + pna, ns);
da = of_read_number(addr + 1, na - 1);
- pr_debug("OF: PCI map, cp=%llx, s=%llx, da=%llx\n",
+ pr_debug("PCI map, cp=%llx, s=%llx, da=%llx\n",
(unsigned long long)cp, (unsigned long long)s,
(unsigned long long)da);
@@ -381,7 +383,7 @@ static u64 of_bus_isa_map(__be32 *addr, const __be32 *range, int na, int ns,
s = of_read_number(range + na + pna, ns);
da = of_read_number(addr + 1, na - 1);
- pr_debug("OF: ISA map, cp=%llx, s=%llx, da=%llx\n",
+ pr_debug("ISA map, cp=%llx, s=%llx, da=%llx\n",
(unsigned long long)cp, (unsigned long long)s,
(unsigned long long)da);
@@ -504,17 +506,17 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus,
*/
ranges = of_get_property(parent, rprop, &rlen);
if (ranges == NULL && !of_empty_ranges_quirk(parent)) {
- pr_debug("OF: no ranges; cannot translate\n");
+ pr_debug("no ranges; cannot translate\n");
return 1;
}
if (ranges == NULL || rlen == 0) {
offset = of_read_number(addr, na);
memset(addr, 0, pna * 4);
- pr_debug("OF: empty ranges; 1:1 translation\n");
+ pr_debug("empty ranges; 1:1 translation\n");
goto finish;
}
- pr_debug("OF: walking ranges...\n");
+ pr_debug("walking ranges...\n");
/* Now walk through the ranges */
rlen /= 4;
@@ -525,14 +527,14 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus,
break;
}
if (offset == OF_BAD_ADDR) {
- pr_debug("OF: not found !\n");
+ pr_debug("not found !\n");
return 1;
}
memcpy(addr, ranges + na, 4 * pna);
finish:
- of_dump_addr("OF: parent translation for:", addr, pna);
- pr_debug("OF: with offset: %llx\n", (unsigned long long)offset);
+ of_dump_addr("parent translation for:", addr, pna);
+ pr_debug("with offset: %llx\n", (unsigned long long)offset);
/* Translate it into parent bus space */
return pbus->translate(addr, offset, pna);
@@ -557,7 +559,7 @@ static u64 __of_translate_address(struct device_node *dev,
int na, ns, pna, pns;
u64 result = OF_BAD_ADDR;
- pr_debug("OF: ** translation for device %s **\n", of_node_full_name(dev));
+ pr_debug("** translation for device %s **\n", of_node_full_name(dev));
/* Increase refcount at current level */
of_node_get(dev);
@@ -571,14 +573,14 @@ static u64 __of_translate_address(struct device_node *dev,
/* Count address cells & copy address locally */
bus->count_cells(dev, &na, &ns);
if (!OF_CHECK_COUNTS(na, ns)) {
- pr_debug("OF: Bad cell count for %s\n", of_node_full_name(dev));
+ pr_debug("Bad cell count for %s\n", of_node_full_name(dev));
goto bail;
}
memcpy(addr, in_addr, na * 4);
- pr_debug("OF: bus is %s (na=%d, ns=%d) on %s\n",
+ pr_debug("bus is %s (na=%d, ns=%d) on %s\n",
bus->name, na, ns, of_node_full_name(parent));
- of_dump_addr("OF: translating address:", addr, na);
+ of_dump_addr("translating address:", addr, na);
/* Translate */
for (;;) {
@@ -589,7 +591,7 @@ static u64 __of_translate_address(struct device_node *dev,
/* If root, we have finished */
if (parent == NULL) {
- pr_debug("OF: reached root node\n");
+ pr_debug("reached root node\n");
result = of_read_number(addr, na);
break;
}
@@ -598,12 +600,12 @@ static u64 __of_translate_address(struct device_node *dev,
pbus = of_match_bus(parent);
pbus->count_cells(dev, &pna, &pns);
if (!OF_CHECK_COUNTS(pna, pns)) {
- pr_err("prom_parse: Bad cell count for %s\n",
+ pr_err("Bad cell count for %s\n",
of_node_full_name(dev));
break;
}
- pr_debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n",
+ pr_debug("parent bus is %s (na=%d, ns=%d) on %s\n",
pbus->name, pna, pns, of_node_full_name(parent));
/* Apply bus translation */
@@ -615,7 +617,7 @@ static u64 __of_translate_address(struct device_node *dev,
ns = pns;
bus = pbus;
- of_dump_addr("OF: one level translation:", addr, na);
+ of_dump_addr("one level translation:", addr, na);
}
bail:
of_node_put(parent);
@@ -853,8 +855,7 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
}
if (!ranges) {
- pr_debug("%s: no dma-ranges found for node(%s)\n",
- __func__, np->full_name);
+ pr_debug("no dma-ranges found for node(%s)\n", np->full_name);
ret = -ENODEV;
goto out;
}
@@ -871,8 +872,8 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
dmaaddr = of_read_number(ranges, naddr);
*paddr = of_translate_dma_address(np, ranges);
if (*paddr == OF_BAD_ADDR) {
- pr_err("%s: translation of DMA address(%pad) to CPU address failed node(%s)\n",
- __func__, dma_addr, np->full_name);
+ pr_err("translation of DMA address(%pad) to CPU address failed node(%s)\n",
+ dma_addr, np->full_name);
ret = -EINVAL;
goto out;
}
diff --git a/drivers/of/base.c b/drivers/of/base.c
index ebf84e3b56d5..a4b608776c73 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -17,6 +17,9 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
+
+#define pr_fmt(fmt) "OF: " fmt
+
#include <linux/console.h>
#include <linux/ctype.h>
#include <linux/cpu.h>
@@ -112,6 +115,7 @@ static ssize_t of_node_property_read(struct file *filp, struct kobject *kobj,
return memory_read_from_buffer(buf, count, &offset, pp->value, pp->length);
}
+/* always return newly allocated name, caller must free after use */
static const char *safe_name(struct kobject *kobj, const char *orig_name)
{
const char *name = orig_name;
@@ -126,9 +130,12 @@ static const char *safe_name(struct kobject *kobj, const char *orig_name)
name = kasprintf(GFP_KERNEL, "%s#%i", orig_name, ++i);
}
- if (name != orig_name)
- pr_warn("device-tree: Duplicate name in %s, renamed to \"%s\"\n",
+ if (name == orig_name) {
+ name = kstrdup(orig_name, GFP_KERNEL);
+ } else {
+ pr_warn("Duplicate name in %s, renamed to \"%s\"\n",
kobject_name(kobj), name);
+ }
return name;
}
@@ -159,6 +166,7 @@ int __of_add_property_sysfs(struct device_node *np, struct property *pp)
int __of_attach_node_sysfs(struct device_node *np)
{
const char *name;
+ struct kobject *parent;
struct property *pp;
int rc;
@@ -171,15 +179,16 @@ int __of_attach_node_sysfs(struct device_node *np)
np->kobj.kset = of_kset;
if (!np->parent) {
/* Nodes without parents are new top level trees */
- rc = kobject_add(&np->kobj, NULL, "%s",
- safe_name(&of_kset->kobj, "base"));
+ name = safe_name(&of_kset->kobj, "base");
+ parent = NULL;
} else {
name = safe_name(&np->parent->kobj, kbasename(np->full_name));
- if (!name || !name[0])
- return -EINVAL;
-
- rc = kobject_add(&np->kobj, &np->parent->kobj, "%s", name);
+ parent = &np->parent->kobj;
}
+ if (!name)
+ return -ENOMEM;
+ rc = kobject_add(&np->kobj, parent, "%s", name);
+ kfree(name);
if (rc)
return rc;
@@ -198,7 +207,7 @@ void __init of_core_init(void)
of_kset = kset_create_and_add("devicetree", NULL, firmware_kobj);
if (!of_kset) {
mutex_unlock(&of_mutex);
- pr_err("devicetree: failed to register existing nodes\n");
+ pr_err("failed to register existing nodes\n");
return;
}
for_each_of_allnodes(np)
@@ -1815,6 +1824,12 @@ int __of_remove_property(struct device_node *np, struct property *prop)
return 0;
}
+void __of_sysfs_remove_bin_file(struct device_node *np, struct property *prop)
+{
+ sysfs_remove_bin_file(&np->kobj, &prop->attr);
+ kfree(prop->attr.attr.name);
+}
+
void __of_remove_property_sysfs(struct device_node *np, struct property *prop)
{
if (!IS_ENABLED(CONFIG_SYSFS))
@@ -1822,7 +1837,7 @@ void __of_remove_property_sysfs(struct device_node *np, struct property *prop)
/* at early boot, bail here and defer setup to of_init() */
if (of_kset && of_node_is_attached(np))
- sysfs_remove_bin_file(&np->kobj, &prop->attr);
+ __of_sysfs_remove_bin_file(np, prop);
}
/**
@@ -1895,7 +1910,7 @@ void __of_update_property_sysfs(struct device_node *np, struct property *newprop
return;
if (oldprop)
- sysfs_remove_bin_file(&np->kobj, &oldprop->attr);
+ __of_sysfs_remove_bin_file(np, oldprop);
__of_add_property_sysfs(np, newprop);
}
@@ -2257,8 +2272,8 @@ struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
of_node_put(node);
if (!port) {
- pr_err("%s(): no port node found in %s\n",
- __func__, parent->full_name);
+ pr_err("graph: no port node found in %s\n",
+ parent->full_name);
return NULL;
}
} else {
diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c
index 3033fa3250dc..888fdbc09992 100644
--- a/drivers/of/dynamic.c
+++ b/drivers/of/dynamic.c
@@ -6,6 +6,8 @@
* device tree nodes.
*/
+#define pr_fmt(fmt) "OF: " fmt
+
#include <linux/of.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
@@ -55,7 +57,7 @@ void __of_detach_node_sysfs(struct device_node *np)
/* only remove properties if on sysfs */
if (of_node_is_attached(np)) {
for_each_property_of_node(np, pp)
- sysfs_remove_bin_file(&np->kobj, &pp->attr);
+ __of_sysfs_remove_bin_file(np, pp);
kobject_del(&np->kobj);
}
@@ -96,13 +98,13 @@ int of_reconfig_notify(unsigned long action, struct of_reconfig_data *p)
switch (action) {
case OF_RECONFIG_ATTACH_NODE:
case OF_RECONFIG_DETACH_NODE:
- pr_debug("of/notify %-15s %s\n", action_names[action],
+ pr_debug("notify %-15s %s\n", action_names[action],
pr->dn->full_name);
break;
case OF_RECONFIG_ADD_PROPERTY:
case OF_RECONFIG_REMOVE_PROPERTY:
case OF_RECONFIG_UPDATE_PROPERTY:
- pr_debug("of/notify %-15s %s:%s\n", action_names[action],
+ pr_debug("notify %-15s %s:%s\n", action_names[action],
pr->dn->full_name, pr->prop->name);
break;
@@ -460,12 +462,12 @@ static void __of_changeset_entry_dump(struct of_changeset_entry *ce)
case OF_RECONFIG_ADD_PROPERTY:
case OF_RECONFIG_REMOVE_PROPERTY:
case OF_RECONFIG_UPDATE_PROPERTY:
- pr_debug("of/cset<%p> %-15s %s/%s\n", ce, action_names[ce->action],
+ pr_debug("cset<%p> %-15s %s/%s\n", ce, action_names[ce->action],
ce->np->full_name, ce->prop->name);
break;
case OF_RECONFIG_ATTACH_NODE:
case OF_RECONFIG_DETACH_NODE:
- pr_debug("of/cset<%p> %-15s %s\n", ce, action_names[ce->action],
+ pr_debug("cset<%p> %-15s %s\n", ce, action_names[ce->action],
ce->np->full_name);
break;
}
@@ -531,13 +533,13 @@ static void __of_changeset_entry_notify(struct of_changeset_entry *ce, bool reve
ret = of_property_notify(ce->action, ce->np, ce->prop, ce->old_prop);
break;
default:
- pr_err("%s: invalid devicetree changeset action: %i\n", __func__,
+ pr_err("invalid devicetree changeset action: %i\n",
(int)ce->action);
return;
}
if (ret)
- pr_err("%s: notifier error @%s\n", __func__, ce->np->full_name);
+ pr_err("changeset notifier error @%s\n", ce->np->full_name);
}
static int __of_changeset_entry_apply(struct of_changeset_entry *ce)
@@ -568,8 +570,8 @@ static int __of_changeset_entry_apply(struct of_changeset_entry *ce)
ret = __of_add_property(ce->np, ce->prop);
if (ret) {
- pr_err("%s: add_property failed @%s/%s\n",
- __func__, ce->np->full_name,
+ pr_err("changeset: add_property failed @%s/%s\n",
+ ce->np->full_name,
ce->prop->name);
break;
}
@@ -577,8 +579,8 @@ static int __of_changeset_entry_apply(struct of_changeset_entry *ce)
case OF_RECONFIG_REMOVE_PROPERTY:
ret = __of_remove_property(ce->np, ce->prop);
if (ret) {
- pr_err("%s: remove_property failed @%s/%s\n",
- __func__, ce->np->full_name,
+ pr_err("changeset: remove_property failed @%s/%s\n",
+ ce->np->full_name,
ce->prop->name);
break;
}
@@ -596,8 +598,8 @@ static int __of_changeset_entry_apply(struct of_changeset_entry *ce)
ret = __of_update_property(ce->np, ce->prop, &old_prop);
if (ret) {
- pr_err("%s: update_property failed @%s/%s\n",
- __func__, ce->np->full_name,
+ pr_err("changeset: update_property failed @%s/%s\n",
+ ce->np->full_name,
ce->prop->name);
break;
}
@@ -677,24 +679,24 @@ int __of_changeset_apply(struct of_changeset *ocs)
int ret;
/* perform the rest of the work */
- pr_debug("of_changeset: applying...\n");
+ pr_debug("changeset: applying...\n");
list_for_each_entry(ce, &ocs->entries, node) {
ret = __of_changeset_entry_apply(ce);
if (ret) {
- pr_err("%s: Error applying changeset (%d)\n", __func__, ret);
+ pr_err("Error applying changeset (%d)\n", ret);
list_for_each_entry_continue_reverse(ce, &ocs->entries, node)
__of_changeset_entry_revert(ce);
return ret;
}
}
- pr_debug("of_changeset: applied, emitting notifiers.\n");
+ pr_debug("changeset: applied, emitting notifiers.\n");
/* drop the global lock while emitting notifiers */
mutex_unlock(&of_mutex);
list_for_each_entry(ce, &ocs->entries, node)
__of_changeset_entry_notify(ce, 0);
mutex_lock(&of_mutex);
- pr_debug("of_changeset: notifiers sent.\n");
+ pr_debug("changeset: notifiers sent.\n");
return 0;
}
@@ -728,24 +730,24 @@ int __of_changeset_revert(struct of_changeset *ocs)
struct of_changeset_entry *ce;
int ret;
- pr_debug("of_changeset: reverting...\n");
+ pr_debug("changeset: reverting...\n");
list_for_each_entry_reverse(ce, &ocs->entries, node) {
ret = __of_changeset_entry_revert(ce);
if (ret) {
- pr_err("%s: Error reverting changeset (%d)\n", __func__, ret);
+ pr_err("Error reverting changeset (%d)\n", ret);
list_for_each_entry_continue(ce, &ocs->entries, node)
__of_changeset_entry_apply(ce);
return ret;
}
}
- pr_debug("of_changeset: reverted, emitting notifiers.\n");
+ pr_debug("changeset: reverted, emitting notifiers.\n");
/* drop the global lock while emitting notifiers */
mutex_unlock(&of_mutex);
list_for_each_entry_reverse(ce, &ocs->entries, node)
__of_changeset_entry_notify(ce, 1);
mutex_lock(&of_mutex);
- pr_debug("of_changeset: notifiers sent.\n");
+ pr_debug("changeset: notifiers sent.\n");
return 0;
}
@@ -795,10 +797,9 @@ int of_changeset_action(struct of_changeset *ocs, unsigned long action,
struct of_changeset_entry *ce;
ce = kzalloc(sizeof(*ce), GFP_KERNEL);
- if (!ce) {
- pr_err("%s: Failed to allocate\n", __func__);
+ if (!ce)
return -ENOMEM;
- }
+
/* get a reference to the node */
ce->action = action;
ce->np = of_node_get(np);
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 0e02947a8a7a..55f1b8391149 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -9,6 +9,8 @@
* version 2 as published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) "OF: fdt:" fmt
+
#include <linux/crc32.h>
#include <linux/kernel.h>
#include <linux/initrd.h>
@@ -182,14 +184,12 @@ static void populate_properties(const void *blob,
val = fdt_getprop_by_offset(blob, cur, &pname, &sz);
if (!val) {
- pr_warn("%s: Cannot locate property at 0x%x\n",
- __func__, cur);
+ pr_warn("Cannot locate property at 0x%x\n", cur);
continue;
}
if (!pname) {
- pr_warn("%s: Cannot find property name at 0x%x\n",
- __func__, cur);
+ pr_warn("Cannot find property name at 0x%x\n", cur);
continue;
}
@@ -439,7 +439,7 @@ static int unflatten_dt_nodes(const void *blob,
}
if (offset < 0 && offset != -FDT_ERR_NOTFOUND) {
- pr_err("%s: Error %d processing FDT\n", __func__, offset);
+ pr_err("Error %d processing FDT\n", offset);
return -EINVAL;
}
@@ -472,7 +472,8 @@ static int unflatten_dt_nodes(const void *blob,
static void *__unflatten_device_tree(const void *blob,
struct device_node *dad,
struct device_node **mynodes,
- void *(*dt_alloc)(u64 size, u64 align))
+ void *(*dt_alloc)(u64 size, u64 align),
+ bool detached)
{
int size;
void *mem;
@@ -516,6 +517,11 @@ static void *__unflatten_device_tree(const void *blob,
pr_warning("End of tree marker overwritten: %08x\n",
be32_to_cpup(mem + size));
+ if (detached) {
+ of_node_set_flag(*mynodes, OF_DETACHED);
+ pr_debug("unflattened tree is detached\n");
+ }
+
pr_debug(" <- unflatten_device_tree()\n");
return mem;
}
@@ -548,7 +554,8 @@ void *of_fdt_unflatten_tree(const unsigned long *blob,
void *mem;
mutex_lock(&of_fdt_unflatten_mutex);
- mem = __unflatten_device_tree(blob, dad, mynodes, &kernel_tree_alloc);
+ mem = __unflatten_device_tree(blob, dad, mynodes, &kernel_tree_alloc,
+ true);
mutex_unlock(&of_fdt_unflatten_mutex);
return mem;
@@ -1237,7 +1244,7 @@ bool __init early_init_dt_scan(void *params)
void __init unflatten_device_tree(void)
{
__unflatten_device_tree(initial_boot_params, NULL, &of_root,
- early_init_dt_alloc_memory_arch);
+ early_init_dt_alloc_memory_arch, false);
/* Get pointer to "/chosen" and "/aliases" nodes for use everywhere */
of_alias_scan(early_init_dt_alloc_memory_arch);
@@ -1294,7 +1301,7 @@ static int __init of_fdt_raw_init(void)
if (of_fdt_crc32 != crc32_be(~0, initial_boot_params,
fdt_totalsize(initial_boot_params))) {
- pr_warn("fdt: not creating '/sys/firmware/fdt': CRC check failed\n");
+ pr_warn("not creating '/sys/firmware/fdt': CRC check failed\n");
return 0;
}
of_fdt_raw_attr.size = fdt_totalsize(initial_boot_params);
diff --git a/drivers/of/fdt_address.c b/drivers/of/fdt_address.c
index dca8f9b93745..843a542dac7d 100644
--- a/drivers/of/fdt_address.c
+++ b/drivers/of/fdt_address.c
@@ -12,6 +12,9 @@
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*/
+
+#define pr_fmt(fmt) "OF: fdt: " fmt
+
#include <linux/kernel.h>
#include <linux/libfdt.h>
#include <linux/of.h>
@@ -30,7 +33,7 @@ static void __init of_dump_addr(const char *s, const __be32 *addr, int na)
pr_debug("%s", s);
while(na--)
pr_cont(" %08x", *(addr++));
- pr_debug("\n");
+ pr_cont("\n");
}
#else
static void __init of_dump_addr(const char *s, const __be32 *addr, int na) { }
@@ -77,7 +80,7 @@ static u64 __init fdt_bus_default_map(__be32 *addr, const __be32 *range,
s = of_read_number(range + na + pna, ns);
da = of_read_number(addr, na);
- pr_debug("FDT: default map, cp=%llx, s=%llx, da=%llx\n",
+ pr_debug("default map, cp=%llx, s=%llx, da=%llx\n",
cp, s, da);
if (da < cp || da >= (cp + s))
@@ -123,11 +126,11 @@ static int __init fdt_translate_one(const void *blob, int parent,
if (rlen == 0) {
offset = of_read_number(addr, na);
memset(addr, 0, pna * 4);
- pr_debug("FDT: empty ranges, 1:1 translation\n");
+ pr_debug("empty ranges, 1:1 translation\n");
goto finish;
}
- pr_debug("FDT: walking ranges...\n");
+ pr_debug("walking ranges...\n");
/* Now walk through the ranges */
rlen /= 4;
@@ -138,14 +141,14 @@ static int __init fdt_translate_one(const void *blob, int parent,
break;
}
if (offset == OF_BAD_ADDR) {
- pr_debug("FDT: not found !\n");
+ pr_debug("not found !\n");
return 1;
}
memcpy(addr, ranges + na, 4 * pna);
finish:
- of_dump_addr("FDT: parent translation for:", addr, pna);
- pr_debug("FDT: with offset: %llx\n", offset);
+ of_dump_addr("parent translation for:", addr, pna);
+ pr_debug("with offset: %llx\n", offset);
/* Translate it into parent bus space */
return pbus->translate(addr, offset, pna);
@@ -170,12 +173,12 @@ static u64 __init fdt_translate_address(const void *blob, int node_offset)
int na, ns, pna, pns;
u64 result = OF_BAD_ADDR;
- pr_debug("FDT: ** translation for device %s **\n",
+ pr_debug("** translation for device %s **\n",
fdt_get_name(blob, node_offset, NULL));
reg = fdt_getprop(blob, node_offset, "reg", &len);
if (!reg) {
- pr_err("FDT: warning: device tree node '%s' has no address.\n",
+ pr_err("warning: device tree node '%s' has no address.\n",
fdt_get_name(blob, node_offset, NULL));
goto bail;
}
@@ -189,15 +192,15 @@ static u64 __init fdt_translate_address(const void *blob, int node_offset)
/* Cound address cells & copy address locally */
bus->count_cells(blob, parent, &na, &ns);
if (!OF_CHECK_COUNTS(na, ns)) {
- pr_err("FDT: Bad cell count for %s\n",
+ pr_err("Bad cell count for %s\n",
fdt_get_name(blob, node_offset, NULL));
goto bail;
}
memcpy(addr, reg, na * 4);
- pr_debug("FDT: bus (na=%d, ns=%d) on %s\n",
+ pr_debug("bus (na=%d, ns=%d) on %s\n",
na, ns, fdt_get_name(blob, parent, NULL));
- of_dump_addr("OF: translating address:", addr, na);
+ of_dump_addr("translating address:", addr, na);
/* Translate */
for (;;) {
@@ -207,7 +210,7 @@ static u64 __init fdt_translate_address(const void *blob, int node_offset)
/* If root, we have finished */
if (parent < 0) {
- pr_debug("FDT: reached root node\n");
+ pr_debug("reached root node\n");
result = of_read_number(addr, na);
break;
}
@@ -216,12 +219,12 @@ static u64 __init fdt_translate_address(const void *blob, int node_offset)
pbus = &of_busses[0];
pbus->count_cells(blob, parent, &pna, &pns);
if (!OF_CHECK_COUNTS(pna, pns)) {
- pr_err("FDT: Bad cell count for %s\n",
+ pr_err("Bad cell count for %s\n",
fdt_get_name(blob, node_offset, NULL));
break;
}
- pr_debug("FDT: parent bus (na=%d, ns=%d) on %s\n",
+ pr_debug("parent bus (na=%d, ns=%d) on %s\n",
pna, pns, fdt_get_name(blob, parent, NULL));
/* Apply bus translation */
@@ -234,7 +237,7 @@ static u64 __init fdt_translate_address(const void *blob, int node_offset)
ns = pns;
bus = pbus;
- of_dump_addr("FDT: one level translation:", addr, na);
+ of_dump_addr("one level translation:", addr, na);
}
bail:
return result;
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 6ec743faabe8..89a71c6074fc 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -18,6 +18,8 @@
* driver.
*/
+#define pr_fmt(fmt) "OF: " fmt
+
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/list.h>
@@ -557,6 +559,8 @@ void __init of_irq_init(const struct of_device_id *matches)
* its children can get processed in a subsequent pass.
*/
list_add_tail(&desc->list, &intc_parent_list);
+
+ of_node_set_flag(desc->dev, OF_POPULATED);
}
/* Get the next pending parent that might have children */
diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
index 13f4fed38048..589b30c68e14 100644
--- a/drivers/of/of_pci.c
+++ b/drivers/of/of_pci.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) "OF: PCI: " fmt
+
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/of.h>
@@ -138,7 +140,7 @@ void of_pci_check_probe_only(void)
else
pci_clear_flags(PCI_PROBE_ONLY);
- pr_info("PCI: PROBE_ONLY %sabled\n", val ? "en" : "dis");
+ pr_info("PROBE_ONLY %sabled\n", val ? "en" : "dis");
}
EXPORT_SYMBOL_GPL(of_pci_check_probe_only);
@@ -181,7 +183,7 @@ int of_pci_get_host_bridge_resources(struct device_node *dev,
if (!bus_range)
return -ENOMEM;
- pr_info("PCI host bridge %s ranges:\n", dev->full_name);
+ pr_info("host bridge %s ranges:\n", dev->full_name);
err = of_pci_parse_bus_range(dev, bus_range);
if (err) {
diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h
index 829469faeb23..18bbb4517e25 100644
--- a/drivers/of/of_private.h
+++ b/drivers/of/of_private.h
@@ -83,6 +83,9 @@ extern int __of_attach_node_sysfs(struct device_node *np);
extern void __of_detach_node(struct device_node *np);
extern void __of_detach_node_sysfs(struct device_node *np);
+extern void __of_sysfs_remove_bin_file(struct device_node *np,
+ struct property *prop);
+
/* iterators for transactions, used for overlays */
/* forward iterator */
#define for_each_transaction_entry(_oft, _te) \
diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c
index 06af99f64ad8..366d8c3c7989 100644
--- a/drivers/of/of_reserved_mem.c
+++ b/drivers/of/of_reserved_mem.c
@@ -13,6 +13,8 @@
* License or (at your optional) any later version of the license.
*/
+#define pr_fmt(fmt) "OF: reserved mem: " fmt
+
#include <linux/err.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
@@ -76,7 +78,7 @@ void __init fdt_reserved_mem_save_node(unsigned long node, const char *uname,
struct reserved_mem *rmem = &reserved_mem[reserved_mem_count];
if (reserved_mem_count == ARRAY_SIZE(reserved_mem)) {
- pr_err("Reserved memory: not enough space all defined regions.\n");
+ pr_err("not enough space all defined regions.\n");
return;
}
@@ -109,8 +111,7 @@ static int __init __reserved_mem_alloc_size(unsigned long node,
return -EINVAL;
if (len != dt_root_size_cells * sizeof(__be32)) {
- pr_err("Reserved memory: invalid size property in '%s' node.\n",
- uname);
+ pr_err("invalid size property in '%s' node.\n", uname);
return -EINVAL;
}
size = dt_mem_next_cell(dt_root_size_cells, &prop);
@@ -120,7 +121,7 @@ static int __init __reserved_mem_alloc_size(unsigned long node,
prop = of_get_flat_dt_prop(node, "alignment", &len);
if (prop) {
if (len != dt_root_addr_cells * sizeof(__be32)) {
- pr_err("Reserved memory: invalid alignment property in '%s' node.\n",
+ pr_err("invalid alignment property in '%s' node.\n",
uname);
return -EINVAL;
}
@@ -142,7 +143,7 @@ static int __init __reserved_mem_alloc_size(unsigned long node,
if (prop) {
if (len % t_len != 0) {
- pr_err("Reserved memory: invalid alloc-ranges property in '%s', skipping node.\n",
+ pr_err("invalid alloc-ranges property in '%s', skipping node.\n",
uname);
return -EINVAL;
}
@@ -157,7 +158,7 @@ static int __init __reserved_mem_alloc_size(unsigned long node,
ret = early_init_dt_alloc_reserved_memory_arch(size,
align, start, end, nomap, &base);
if (ret == 0) {
- pr_debug("Reserved memory: allocated memory for '%s' node: base %pa, size %ld MiB\n",
+ pr_debug("allocated memory for '%s' node: base %pa, size %ld MiB\n",
uname, &base,
(unsigned long)size / SZ_1M);
break;
@@ -169,13 +170,12 @@ static int __init __reserved_mem_alloc_size(unsigned long node,
ret = early_init_dt_alloc_reserved_memory_arch(size, align,
0, 0, nomap, &base);
if (ret == 0)
- pr_debug("Reserved memory: allocated memory for '%s' node: base %pa, size %ld MiB\n",
+ pr_debug("allocated memory for '%s' node: base %pa, size %ld MiB\n",
uname, &base, (unsigned long)size / SZ_1M);
}
if (base == 0) {
- pr_info("Reserved memory: failed to allocate memory for node '%s'\n",
- uname);
+ pr_info("failed to allocate memory for node '%s'\n", uname);
return -ENOMEM;
}
@@ -204,7 +204,7 @@ static int __init __reserved_mem_init_node(struct reserved_mem *rmem)
continue;
if (initfn(rmem) == 0) {
- pr_info("Reserved memory: initialized node %s, compatible id %s\n",
+ pr_info("initialized node %s, compatible id %s\n",
rmem->name, compat);
return 0;
}
@@ -246,7 +246,7 @@ static void __init __rmem_check_for_overlap(void)
this_end = this->base + this->size;
next_end = next->base + next->size;
- pr_err("Reserved memory: OVERLAP DETECTED!\n%s (%pa--%pa) overlaps with %s (%pa--%pa)\n",
+ pr_err("OVERLAP DETECTED!\n%s (%pa--%pa) overlaps with %s (%pa--%pa)\n",
this->name, &this->base, &this_end,
next->name, &next->base, &next_end);
}
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index 82250815e9a5..318dbb51e7a2 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -8,7 +8,9 @@
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
-#undef DEBUG
+
+#define pr_fmt(fmt) "OF: overlay: " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -137,8 +139,8 @@ static int of_overlay_apply_one(struct of_overlay *ov,
for_each_property_of_node(overlay, prop) {
ret = of_overlay_apply_single_property(ov, target, prop);
if (ret) {
- pr_err("%s: Failed to apply prop @%s/%s\n",
- __func__, target->full_name, prop->name);
+ pr_err("Failed to apply prop @%s/%s\n",
+ target->full_name, prop->name);
return ret;
}
}
@@ -146,9 +148,8 @@ static int of_overlay_apply_one(struct of_overlay *ov,
for_each_child_of_node(overlay, child) {
ret = of_overlay_apply_single_device_node(ov, target, child);
if (ret != 0) {
- pr_err("%s: Failed to apply single node @%s/%s\n",
- __func__, target->full_name,
- child->name);
+ pr_err("Failed to apply single node @%s/%s\n",
+ target->full_name, child->name);
of_node_put(child);
return ret;
}
@@ -176,8 +177,7 @@ static int of_overlay_apply(struct of_overlay *ov)
err = of_overlay_apply_one(ov, ovinfo->target, ovinfo->overlay);
if (err != 0) {
- pr_err("%s: overlay failed '%s'\n",
- __func__, ovinfo->target->full_name);
+ pr_err("apply failed '%s'\n", ovinfo->target->full_name);
return err;
}
}
@@ -208,7 +208,7 @@ static struct device_node *find_target_node(struct device_node *info_node)
if (ret == 0)
return of_find_node_by_path(path);
- pr_err("%s: Failed to find target for node %p (%s)\n", __func__,
+ pr_err("Failed to find target for node %p (%s)\n",
info_node, info_node->name);
return NULL;
@@ -355,8 +355,6 @@ int of_overlay_create(struct device_node *tree)
id = idr_alloc(&ov_idr, ov, 0, 0, GFP_KERNEL);
if (id < 0) {
- pr_err("%s: idr_alloc() failed for tree@%s\n",
- __func__, tree->full_name);
err = id;
goto err_destroy_trans;
}
@@ -365,26 +363,21 @@ int of_overlay_create(struct device_node *tree)
/* build the overlay info structures */
err = of_build_overlay_info(ov, tree);
if (err) {
- pr_err("%s: of_build_overlay_info() failed for tree@%s\n",
- __func__, tree->full_name);
+ pr_err("of_build_overlay_info() failed for tree@%s\n",
+ tree->full_name);
goto err_free_idr;
}
/* apply the overlay */
err = of_overlay_apply(ov);
- if (err) {
- pr_err("%s: of_overlay_apply() failed for tree@%s\n",
- __func__, tree->full_name);
+ if (err)
goto err_abort_trans;
- }
/* apply the changeset */
err = __of_changeset_apply(&ov->cset);
- if (err) {
- pr_err("%s: __of_changeset_apply() failed for tree@%s\n",
- __func__, tree->full_name);
+ if (err)
goto err_revert_overlay;
- }
+
/* add to the tail of the overlay list */
list_add_tail(&ov->node, &ov_list);
@@ -469,8 +462,7 @@ static int overlay_removal_is_ok(struct of_overlay *ov)
list_for_each_entry(ce, &ov->cset.entries, node) {
if (!overlay_is_topmost(ov, ce->np)) {
- pr_err("%s: overlay #%d is not topmost\n",
- __func__, ov->id);
+ pr_err("overlay #%d is not topmost\n", ov->id);
return 0;
}
}
@@ -496,16 +488,13 @@ int of_overlay_destroy(int id)
ov = idr_find(&ov_idr, id);
if (ov == NULL) {
err = -ENODEV;
- pr_err("%s: Could not find overlay #%d\n",
- __func__, id);
+ pr_err("destroy: Could not find overlay #%d\n", id);
goto out;
}
/* check whether the overlay is safe to remove */
if (!overlay_removal_is_ok(ov)) {
err = -EBUSY;
- pr_err("%s: removal check failed for overlay #%d\n",
- __func__, id);
goto out;
}
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 16e8daffac06..765390e3ed8d 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -11,6 +11,9 @@
* 2 of the License, or (at your option) any later version.
*
*/
+
+#define pr_fmt(fmt) "OF: " fmt
+
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/amba/bus.h>
@@ -31,7 +34,6 @@ const struct of_device_id of_default_bus_match_table[] = {
#endif /* CONFIG_ARM_AMBA */
{} /* Empty terminated list */
};
-EXPORT_SYMBOL(of_default_bus_match_table);
static int of_dev_node_match(struct device *dev, void *data)
{
@@ -234,11 +236,8 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
return NULL;
dev = amba_device_alloc(NULL, 0, 0);
- if (!dev) {
- pr_err("%s(): amba_device_alloc() failed for %s\n",
- __func__, node->full_name);
+ if (!dev)
goto err_clear_flag;
- }
/* setup generic device info */
dev->dev.of_node = of_node_get(node);
@@ -261,15 +260,15 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
ret = of_address_to_resource(node, 0, &dev->res);
if (ret) {
- pr_err("%s(): of_address_to_resource() failed (%d) for %s\n",
- __func__, ret, node->full_name);
+ pr_err("amba: of_address_to_resource() failed (%d) for %s\n",
+ ret, node->full_name);
goto err_free;
}
ret = amba_device_add(dev, &iomem_resource);
if (ret) {
- pr_err("%s(): amba_device_add() failed (%d) for %s\n",
- __func__, ret, node->full_name);
+ pr_err("amba_device_add() failed (%d) for %s\n",
+ ret, node->full_name);
goto err_free;
}
@@ -363,6 +362,12 @@ static int of_platform_bus_create(struct device_node *bus,
return 0;
}
+ if (of_node_check_flag(bus, OF_POPULATED_BUS)) {
+ pr_debug("%s() - skipping %s, already populated\n",
+ __func__, bus->full_name);
+ return 0;
+ }
+
auxdata = of_dev_lookup(lookup, bus);
if (auxdata) {
bus_id = auxdata->name;
@@ -414,7 +419,7 @@ int of_platform_bus_probe(struct device_node *root,
if (!root)
return -EINVAL;
- pr_debug("of_platform_bus_probe()\n");
+ pr_debug("%s()\n", __func__);
pr_debug(" starting at: %s\n", root->full_name);
/* Do a self check of bus type, if there's a match, create children */
@@ -466,6 +471,9 @@ int of_platform_populate(struct device_node *root,
if (!root)
return -EINVAL;
+ pr_debug("%s()\n", __func__);
+ pr_debug(" starting at: %s\n", root->full_name);
+
for_each_child_of_node(root, child) {
rc = of_platform_bus_create(child, matches, lookup, parent, true);
if (rc) {
@@ -489,6 +497,15 @@ int of_platform_default_populate(struct device_node *root,
}
EXPORT_SYMBOL_GPL(of_platform_default_populate);
+static int __init of_platform_default_populate_init(void)
+{
+ if (of_have_populated_dt())
+ of_platform_default_populate(NULL, NULL, NULL);
+
+ return 0;
+}
+arch_initcall_sync(of_platform_default_populate_init);
+
static int of_platform_device_destroy(struct device *dev, void *data)
{
/* Do not touch devices not populated from the device tree */
diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c
index d313d492f278..46325d6394cf 100644
--- a/drivers/of/resolver.c
+++ b/drivers/of/resolver.c
@@ -9,6 +9,8 @@
* version 2 as published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) "OF: resolver: " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -313,6 +315,11 @@ int of_resolve_phandles(struct device_node *resolve)
phandle phandle, phandle_delta;
int err;
+ if (!resolve)
+ pr_err("%s: null node\n", __func__);
+ if (resolve && !of_node_check_flag(resolve, OF_DETACHED))
+ pr_err("%s: node %s not detached\n", __func__,
+ resolve->full_name);
/* the resolve node must exist, and be detached */
if (!resolve || !of_node_check_flag(resolve, OF_DETACHED))
return -EINVAL;
@@ -369,6 +376,7 @@ int of_resolve_phandles(struct device_node *resolve)
/* we need to fixup, but no root symbols... */
if (!root_sym) {
+ pr_err("%s: no symbols in root of device tree.\n", __func__);
err = -EINVAL;
goto out;
}
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index f34ed9310323..53c83d66eb7e 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -771,7 +771,7 @@ static void __init of_unittest_platform_populate(void)
};
np = of_find_node_by_path("/testcase-data");
- of_platform_populate(np, of_default_bus_match_table, NULL, NULL);
+ of_platform_default_populate(np, NULL, NULL);
/* Test that a missing irq domain returns -EPROBE_DEFER */
np = of_find_node_by_path("/testcase-data/testcase-device1");
@@ -1871,8 +1871,7 @@ static void __init of_unittest_overlay(void)
goto out;
}
- ret = of_platform_populate(bus_np, of_default_bus_match_table,
- NULL, NULL);
+ ret = of_platform_default_populate(bus_np, NULL, NULL);
if (ret != 0) {
unittest(0, "could not populate bus @ \"%s\"\n", bus_path);
goto out;
diff --git a/include/linux/of_iommu.h b/include/linux/of_iommu.h
index bd02b44902d0..e80b9c762a03 100644
--- a/include/linux/of_iommu.h
+++ b/include/linux/of_iommu.h
@@ -11,7 +11,6 @@ extern int of_get_dma_window(struct device_node *dn, const char *prefix,
int index, unsigned long *busno, dma_addr_t *addr,
size_t *size);
-extern void of_iommu_init(void);
extern const struct iommu_ops *of_iommu_configure(struct device *dev,
struct device_node *master_np);
@@ -24,7 +23,6 @@ static inline int of_get_dma_window(struct device_node *dn, const char *prefix,
return -EINVAL;
}
-static inline void of_iommu_init(void) { }
static inline const struct iommu_ops *of_iommu_configure(struct device *dev,
struct device_node *master_np)
{
diff --git a/scripts/dtc/dt_to_config b/scripts/dtc/dt_to_config
new file mode 100755
index 000000000000..9a248b505c58
--- /dev/null
+++ b/scripts/dtc/dt_to_config
@@ -0,0 +1,1213 @@
+#!/usr/bin/perl
+
+# Copyright 2016 by Frank Rowand
+# Copyright 2016 by Gaurav Minocha
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License v2.
+
+use strict 'refs';
+use strict subs;
+
+use Getopt::Long;
+
+$VUFX = "160610a";
+
+$script_name = $0;
+$script_name =~ s|^.*/||;
+
+
+# ----- constants for print_flags()
+
+# Position in string $pr_flags. Range of 0..($num_pr_flags - 1).
+$pr_flag_pos_mcompatible = 0;
+$pr_flag_pos_driver = 1;
+$pr_flag_pos_mdriver = 2;
+$pr_flag_pos_config = 3;
+$pr_flag_pos_mconfig = 4;
+$pr_flag_pos_node_not_enabled = 5;
+$pr_flag_pos_white_list = 6;
+$pr_flag_pos_hard_coded = 7;
+$pr_flag_pos_config_hard_coded = 8;
+$pr_flag_pos_config_none = 9;
+$pr_flag_pos_config_m = 10;
+$pr_flag_pos_config_y = 11;
+$pr_flag_pos_config_test_fail = 12;
+
+$num_pr_flags = $pr_flag_pos_config_test_fail + 1;
+
+# flags in @pr_flag_value must be unique values to allow simple regular
+# expessions to work for --include_flags and --exclude_flags.
+# Convention: use upper case letters for potential issues or problems.
+
+@pr_flag_value = ('M', 'd', 'D', 'c', 'C', 'E', 'W', 'H', 'x', 'n', 'm', 'y', 'F');
+
+@pr_flag_help = (
+ "multiple compatibles found for this node",
+ "driver found for this compatible",
+ "multiple drivers found for this compatible",
+ "kernel config found for this driver",
+ "multiple config options found for this driver",
+ "node is not enabled",
+ "compatible is white listed",
+ "matching driver and/or kernel config is hard coded",
+ "kernel config hard coded in Makefile",
+ "one or more kernel config file options is not set",
+ "one or more kernel config file options is set to 'm'",
+ "one or more kernel config file options is set to 'y'",
+ "one of more kernel config file options fails to have correct value"
+);
+
+
+# -----
+
+%driver_config = (); # driver config array, indexed by driver source file
+%driver_count = (); # driver_cnt, indexed by compatible
+%compat_driver = (); # compatible driver array, indexed by compatible
+%existing_config = (); # existing config symbols present in given config file
+ # expected values are: "y", "m", a decimal number, a
+ # hex number, or a string
+
+# ----- magic compatibles, do not have a driver
+#
+# Will not search for drivers for these compatibles.
+
+%compat_white_list = (
+ 'none' => '1',
+ 'pci' => '1',
+ 'simple-bus' => '1',
+);
+
+# Will not search for drivers for these compatibles.
+#
+# These compatibles have a very large number of false positives.
+#
+# 'hardcoded_no_driver' is a magic value. Other code knows this
+# magic value. Do not use 'no_driver' here!
+#
+# Revisit each 'hardcoded_no_driver' to see how the compatible
+# is used. Are there drivers that can be provided?
+
+%driver_hard_code_list = (
+ 'cache' => ['hardcoded_no_driver'],
+ 'eeprom' => ['hardcoded_no_driver'],
+ 'gpio' => ['hardcoded_no_driver'],
+ 'gpio-keys' => ['drivers/input/keyboard/gpio_keys.c'],
+ 'i2c-gpio' => ['drivers/i2c/busses/i2c-gpio.c'],
+ 'isa' => ['arch/mips/mti-malta/malta-dt.c',
+ 'arch/x86/kernel/devicetree.c'],
+ 'led' => ['hardcoded_no_driver'],
+ 'm25p32' => ['hardcoded_no_driver'],
+ 'm25p64' => ['hardcoded_no_driver'],
+ 'm25p80' => ['hardcoded_no_driver'],
+ 'mtd-ram' => ['drivers/mtd/maps/physmap_of.c'],
+ 'pwm-backlight' => ['drivers/video/backlight/pwm_bl.c'],
+ 'spidev' => ['hardcoded_no_driver'],
+ 'syscon' => ['drivers/mfd/syscon.c'],
+ 'tlv320aic23' => ['hardcoded_no_driver'],
+ 'wm8731' => ['hardcoded_no_driver'],
+);
+
+# Use these config options instead of searching makefiles
+
+%driver_config_hard_code_list = (
+
+ # this one needed even if %driver_hard_code_list is empty
+ 'no_driver' => ['no_config'],
+ 'hardcoded_no_driver' => ['no_config'],
+
+ # drivers/usb/host/ehci-ppc-of.c
+ # drivers/usb/host/ehci-xilinx-of.c
+ # are included from:
+ # drivers/usb/host/ehci-hcd.c
+ # thus the search of Makefile for the included .c files is incorrect
+ # ehci-hcd.c wraps the includes with ifdef CONFIG_USB_EHCI_HCD_..._OF
+ #
+ # similar model for ohci-hcd.c (but no ohci-xilinx-of.c)
+ #
+ # similarly, uhci-hcd.c includes uhci-platform.c
+
+ 'drivers/usb/host/ehci-ppc-of.c' => ['CONFIG_USB_EHCI_HCD',
+ 'CONFIG_USB_EHCI_HCD_PPC_OF'],
+ 'drivers/usb/host/ohci-ppc-of.c' => ['CONFIG_USB_OHCI_HCD',
+ 'CONFIG_USB_OHCI_HCD_PPC_OF'],
+
+ 'drivers/usb/host/ehci-xilinx-of.c' => ['CONFIG_USB_EHCI_HCD',
+ 'CONFIG_USB_EHCI_HCD_XILINX'],
+
+ 'drivers/usb/host/uhci-platform.c' => ['CONFIG_USB_UHCI_HCD',
+ 'CONFIG_USB_UHCI_PLATFORM'],
+
+ # scan_makefile will find only one of these config options:
+ # ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_LS1021A),)
+ 'arch/arm/mach-imx/platsmp.c' => ['CONFIG_SOC_IMX6 && CONFIG_SMP',
+ 'CONFIG_SOC_LS1021A && CONFIG_SMP'],
+);
+
+
+# 'virt/kvm/arm/.*' are controlled by makefiles in other directories,
+# using relative paths, such as 'KVM := ../../../virt/kvm'. Do not
+# add complexity to find_kconfig() to deal with this. There is a long
+# term intent to change the kvm related makefiles to the normal kernel
+# style. After that is done, this entry can be removed from the
+# black_list_driver.
+
+@black_list_driver = (
+ # kvm no longer a problem after commit 503a62862e8f in 4.7-rc1
+ # 'virt/kvm/arm/.*',
+);
+
+
+sub usage()
+{
+ print
+"
+Usage: $script_name [options] device-tree...
+
+ device_tree is: dts_file | dtb_file | proc_device-tree
+
+
+Valid options:
+ -c FILE Read kernel config options from FILE
+ --config FILE synonym for 'c'
+ --config-format config file friendly output format
+ --exclude-flag FLAG exclude entries with a matching flag
+ -h Display this message and exit
+ --help synonym for 'h'
+ --black-list-driver use driver black list
+ --white-list-config use config white list
+ --white-list-driver use driver white list
+ --include-flag FLAG include only entries with a matching flag
+ --include-suspect include only entries with an uppercase flag
+ --short-name do not show the path portion of the node name
+ --show-lists report of white and black lists
+ --version Display program version and exit
+
+
+ Report driver source files that match the compatibles in the device
+ tree file and the kernel config options that enable the driver source
+ files.
+
+ This program must be run in the root directory of a Linux kernel
+ source tree.
+
+ The default format is a report that is intended to be easily human
+ scannable.
+
+ An alternate format can be selected by --config-format. This will
+ create output that can easily be edited to create a fragment that can
+ be appended to the existing kernel config file. Each entry consists of
+ multiple lines. The first line reports flags, the node path, compatible
+ value, driver file matching the compatible, configuration options, and
+ current values of the configuration options. For each configuration
+ option, the following lines report the current value and the value that
+ is required for the driver file to be included in the kernel.
+
+ If a large number of drivers or config options is listed for a node,
+ and the '$pr_flag_value[$pr_flag_pos_hard_coded]' flag is set consider using --white-list-config and/or
+ --white-list-driver. If the white list option suppresses the correct
+ entry please report that as a bug.
+
+ CAUTION:
+ This program uses heuristics to guess which driver(s) support each
+ compatible string and which config option(s) enables the driver(s).
+ Do not believe that the reported information is fully correct.
+ This program is intended to aid the process of determining the
+ proper kernel configuration for a device tree, but this is not
+ a fully automated process -- human involvement may still be
+ required!
+
+ The driver match heuristic used is to search for source files
+ containing the compatible string enclosed in quotes.
+
+ This program might not be able to find all drivers matching a
+ compatible string.
+
+ Some makefiles are overly clever. This program was not made
+ complex enough to handle them. If no config option is listed
+ for a driver, look at the makefile for the driver source file.
+ Even if a config option is listed for a driver, some other
+ available config options may not be listed.
+
+ FLAG values:
+";
+
+ for ($k = 0; $k < $num_pr_flags; $k++) {
+ printf " %s %s\n", $pr_flag_value[$k], $pr_flag_help[$k];
+ }
+
+ print
+"
+ Upper case letters indicate potential issues or problems.
+
+ The flag:
+
+";
+
+ $k = $pr_flag_pos_hard_coded;
+ printf " %s %s\n", $pr_flag_value[$k], $pr_flag_help[$k];
+
+ print
+"
+ will be set if the config or driver is in the white lists, even if
+ --white-list-config and --white-list-driver are not specified.
+ This is a hint that 1) many of these reported lines are likely to
+ be incorrect, and 2) using those options will reduce the number of
+ drivers and/or config options reported.
+
+ --white-list-config and --white-list-driver may not be accurate if this
+ program is not well maintained. Use them with appropriate skepticism.
+ Use the --show-lists option to report the values in the list.
+
+ Return value:
+ 0 if no error
+ 1 error processing command line
+ 2 unable to open or read kernel config file
+ 3 unable to open or process input device tree file(s)
+
+ EXAMPLES:
+
+ dt_to_config arch/arm/boot/dts/my_dts_file.dts
+
+ Basic report.
+
+ dt_to_config \\
+ --config \${KBUILD_OUTPUT}/.config \\
+ arch/\${ARCH}/boot/dts/my_dts_file.dts
+
+ Full report, with config file issues noted.
+
+ dt_to_config --include-suspect \\
+ --config \${KBUILD_OUTPUT}/.config \\
+ arch/\${ARCH}/boot/dts/my_dts_file.dts
+
+ Report of node / compatible string / driver tuples that should
+ be further investigated. A node may have multiple compatible
+ strings. A compatible string may be matched by multiple drivers.
+ A driver may have config file issues noted. The compatible string
+ and/or driver may be in the white lists.
+
+ dt_to_config --include-suspect --config-format \\
+ --config ${KBUILD_OUTPUT}/.config \\
+ arch/\${ARCH}/boot/dts/my_dts_file.dts
+
+ Report of node / compatible string / driver tuples that should
+ be further investigated. The report can be edited to uncomment
+ the config options to select the desired tuple for a given node.
+ A node may have multiple compatible strings. A compatible string
+ may be matched by multiple drivers. A driver may have config file
+ issues noted. The compatible string and/or driver may be in the
+ white lists.
+
+";
+}
+
+sub set_flag()
+{
+ # pr_flags_ref is a reference to $pr_flags
+
+ my $pr_flags_ref = shift;
+ my $pos = shift;
+
+ substr $$pr_flags_ref, $pos, 1, $pr_flag_value[$pos];
+
+ return $pr_flags;
+}
+
+sub print_flags()
+{
+ # return 1 if anything printed, else 0
+
+ # some fields of pn_arg_ref might not be used in this function, but
+ # extract all of them anyway.
+ my $pn_arg_ref = shift;
+
+ my $compat = $pn_arg_ref->{compat};
+ my $compatible_cnt = $pn_arg_ref->{compatible_cnt};
+ my $config = $pn_arg_ref->{config};
+ my $config_cnt = $pn_arg_ref->{config_cnt};
+ my $driver = $pn_arg_ref->{driver};
+ my $driver_cnt = $pn_arg_ref->{driver_cnt};
+ my $full_node = $pn_arg_ref->{full_node};
+ my $node = $pn_arg_ref->{node};
+ my $node_enabled = $pn_arg_ref->{node_enabled};
+ my $white_list = $pn_arg_ref->{white_list};
+
+ my $pr_flags = '-' x $num_pr_flags;
+
+
+ # ----- set flags in $pr_flags
+
+ if ($compatible_cnt > 1) {
+ &set_flag(\$pr_flags, $pr_flag_pos_mcompatible);
+ }
+
+ if ($config_cnt > 1) {
+ &set_flag(\$pr_flags, $pr_flag_pos_mconfig);
+ }
+
+ if ($driver_cnt >= 1) {
+ &set_flag(\$pr_flags, $pr_flag_pos_driver);
+ }
+
+ if ($driver_cnt > 1) {
+ &set_flag(\$pr_flags, $pr_flag_pos_mdriver);
+ }
+
+ # These strings are the same way the linux kernel tests.
+ # The ePapr lists of values is slightly different.
+ if (!(
+ ($node_enabled eq "") ||
+ ($node_enabled eq "ok") ||
+ ($node_enabled eq "okay")
+ )) {
+ &set_flag(\$pr_flags, $pr_flag_pos_node_not_enabled);
+ }
+
+ if ($white_list) {
+ &set_flag(\$pr_flags, $pr_flag_pos_white_list);
+ }
+
+ if (exists($driver_hard_code_list{$compat}) ||
+ (exists($driver_config_hard_code_list{$driver}) &&
+ ($driver ne "no_driver"))) {
+ &set_flag(\$pr_flags, $pr_flag_pos_hard_coded);
+ }
+
+ my @configs = split(' && ', $config);
+ for $configs (@configs) {
+ $not = $configs =~ /^!/;
+ $configs =~ s/^!//;
+
+ if (($configs ne "no_config") && ($configs ne "no_makefile")) {
+ &set_flag(\$pr_flags, $pr_flag_pos_config);
+ }
+
+ if (($config_cnt >= 1) &&
+ ($configs !~ /CONFIG_/) &&
+ (($configs ne "no_config") && ($configs ne "no_makefile"))) {
+ &set_flag(\$pr_flags, $pr_flag_pos_config_hard_coded);
+ }
+
+ my $existing_config = $existing_config{$configs};
+ if ($existing_config eq "m") {
+ &set_flag(\$pr_flags, $pr_flag_pos_config_m);
+ # Possible fail, depends on whether built in or
+ # module is desired.
+ &set_flag(\$pr_flags, $pr_flag_pos_config_test_fail);
+ } elsif ($existing_config eq "y") {
+ &set_flag(\$pr_flags, $pr_flag_pos_config_y);
+ if ($not) {
+ &set_flag(\$pr_flags, $pr_flag_pos_config_test_fail);
+ }
+ } elsif (($config_file) && ($configs =~ /CONFIG_/)) {
+ &set_flag(\$pr_flags, $pr_flag_pos_config_none);
+ if (!$not) {
+ &set_flag(\$pr_flags, $pr_flag_pos_config_test_fail);
+ }
+ }
+ }
+
+ # ----- include / exclude filters
+
+ if ($include_flag_pattern && ($pr_flags !~ m/$include_flag_pattern/)) {
+ return 0;
+ }
+
+ if ($exclude_flag_pattern && ($pr_flags =~ m/$exclude_flag_pattern/)) {
+ return 0;
+ }
+
+ if ($config_format) {
+ print "# ";
+ }
+ print "$pr_flags : ";
+
+ return 1;
+}
+
+
+sub print_node()
+{
+ # return number of lines printed
+
+ # some fields of pn_arg_ref might not be used in this function, but
+ # extract all of them anyway.
+ my $pn_arg_ref = shift;
+
+ my $compat = $pn_arg_ref->{compat};
+ my $compatible_cnt = $pn_arg_ref->{compatible_cnt};
+ my $config = $pn_arg_ref->{config};
+ my $config_cnt = $pn_arg_ref->{config_cnt};
+ my $driver = $pn_arg_ref->{driver};
+ my $driver_cnt = $pn_arg_ref->{driver_cnt};
+ my $full_node = $pn_arg_ref->{full_node};
+ my $node = $pn_arg_ref->{node};
+ my $node_enabled = $pn_arg_ref->{node_enabled};
+ my $white_list = $pn_arg_ref->{white_list};
+
+ my $separator;
+
+ if (! &print_flags($pn_arg_ref)) {
+ return 0;
+ }
+
+
+ if ($short_name) {
+ print "$node";
+ } else {
+ print "$full_node";
+ }
+ print " : $compat : $driver : $config : ";
+
+ my @configs = split(' && ', $config);
+
+ if ($config_file) {
+ for $configs (@configs) {
+ $configs =~ s/^!//;
+ my $existing_config = $existing_config{$configs};
+ if (!$existing_config) {
+ # check for /-m/, /-y/, or /-objs/
+ if ($configs !~ /CONFIG_/) {
+ $existing_config = "x";
+ };
+ };
+ if ($existing_config) {
+ print "$separator", "$existing_config";
+ $separator = ", ";
+ } else {
+ print "$separator", "n";
+ $separator = ", ";
+ }
+ }
+ } else {
+ print "none";
+ }
+
+ print "\n";
+
+ if ($config_format) {
+ for $configs (@configs) {
+ $not = $configs =~ /^!/;
+ $configs =~ s/^!//;
+ my $existing_config = $existing_config{$configs};
+
+ if ($not) {
+ if ($configs !~ /CONFIG_/) {
+ print "# $configs\n";
+ } elsif ($existing_config eq "m") {
+ print "# $configs is m\n";
+ print "# $configs=n\n";
+ } elsif ($existing_config eq "y") {
+ print "# $configs is set\n";
+ print "# $configs=n\n";
+ } else {
+ print "# $configs is not set\n";
+ print "# $configs=n\n";
+ }
+
+ } else {
+ if ($configs !~ /CONFIG_/) {
+ print "# $configs\n";
+ } elsif ($existing_config eq "m") {
+ print "# $configs is m\n";
+ print "# $configs=y\n";
+ } elsif ($existing_config eq "y") {
+ print "# $configs is set\n";
+ print "# $configs=y\n";
+ } else {
+ print "# $configs is not set\n";
+ print "# $configs=y\n";
+ }
+ }
+ }
+ }
+
+ return 1;
+}
+
+
+sub scan_makefile
+{
+ my $pn_arg_ref = shift;
+ my $driver = shift;
+
+ # ----- Find Kconfig symbols that enable driver
+
+ my ($dir, $base) = $driver =~ m{(.*)/(.*).c};
+
+ my $makefile = $dir . "/Makefile";
+ if (! -r $makefile) {
+ $makefile = $dir . "/Kbuild";
+ }
+ if (! -r $makefile) {
+ my $config;
+
+ $config = 'no_makefile';
+ push @{ $driver_config{$driver} }, $config;
+ return;
+ }
+
+ if (!open(MAKEFILE_FILE, "<", "$makefile")) {
+ return;
+ }
+
+ my $line;
+ my @config;
+ my @if_config;
+ my @make_var;
+
+ NEXT_LINE:
+ while ($next_line = <MAKEFILE_FILE>) {
+ my $config;
+ my $if_config;
+ my $ifdef;
+ my $ifeq;
+ my $ifndef;
+ my $ifneq;
+ my $ifdef_config;
+ my $ifeq_config;
+ my $ifndef_config;
+ my $ifneq_config;
+
+ chomp($next_line);
+ $line = $line . $next_line;
+ if ($next_line =~ /\\$/) {
+ $line =~ s/\\$/ /;
+ next NEXT_LINE;
+ }
+ if ($line =~ /^\s*#/) {
+ $line = "";
+ next NEXT_LINE;
+ }
+
+ # ----- condition ... else ... endif
+
+ if ($line =~ /^([ ]\s*|)else\b/) {
+ $if_config = "!" . pop @if_config;
+ $if_config =~ s/^!!//;
+ push @if_config, $if_config;
+ $line =~ s/^([ ]\s*|)else\b//;
+ }
+
+ ($null, $ifeq_config, $ifeq_config_val ) = $line =~ /^([ ]\s*|)ifeq\b.*\b(CONFIG_[A-Za-z0-9_]*)(.*)/;
+ ($null, $ifneq_config, $ifneq_config_val) = $line =~ /^([ ]\s*|)ifneq\b.*\b(CONFIG_[A-Za-z0-9_]*)(.*)/;
+ ($null, $ifdef_config) = $line =~ /^([ ]\s*|)ifdef\b.*\b(CONFIG_[A-Za-z0-9_]*)/;
+ ($null, $ifndef_config) = $line =~ /^([ ]\s*|)ifndef\b.*\b(CONFIG_[A-Za-z0-9_]*)/;
+
+ ($null, $ifeq) = $line =~ /^([ ]\s*|)ifeq\b\s*(.*)/;
+ ($null, $ifneq) = $line =~ /^([ ]\s*|)ifneq\b\s*(.*)/;
+ ($null, $ifdef) = $line =~ /^([ ]\s*|)ifdef\b\s*(.*)/;
+ ($null, $ifndef) = $line =~ /^([ ]\s*|)ifndef\b\s*(.*)/;
+
+ # Order of tests is important. Prefer "CONFIG_*" regex match over
+ # less specific regex match.
+ if ($ifdef_config) {
+ $if_config = $ifdef_config;
+ } elsif ($ifeq_config) {
+ if ($ifeq_config_val =~ /y/) {
+ $if_config = $ifeq_config;
+ } else {
+ $if_config = "!" . $ifeq_config;
+ }
+ } elsif ($ifndef_config) {
+ $if_config = "!" . $ifndef_config;
+ } elsif ($ifneq_config) {
+ if ($ifneq_config_val =~ /y/) {
+ $if_config = "!" . $ifneq_config;
+ } else {
+ $if_config = $ifneq_config;
+ }
+ } elsif ($ifdef) {
+ $if_config = $ifdef;
+ } elsif ($ifeq) {
+ $if_config = $ifeq;
+ } elsif ($ifndef) {
+ $if_config = "!" . $ifndef;
+ } elsif ($ifneq) {
+ $if_config = "!" . $ifneq;
+ } else {
+ $if_config = "";
+ }
+ $if_config =~ s/^!!//;
+
+ if ($if_config) {
+ push @if_config, $if_config;
+ $line = "";
+ next NEXT_LINE;
+ }
+
+ if ($line =~ /^([ ]\s*|)endif\b/) {
+ pop @if_config;
+ $line = "";
+ next NEXT_LINE;
+ }
+
+ # ----- simple CONFIG_* = *.[co] or xxx [+:?]*= *.[co]
+ # Most makefiles select on *.o, but
+ # arch/powerpc/boot/Makefile selects on *.c
+
+ ($config) = $line =~ /(CONFIG_[A-Za-z0-9_]+).*\b$base.[co]\b/;
+
+ # ----- match a make variable instead of *.[co]
+ # Recursively expanded variables are not handled.
+
+ if (!$config) {
+ my $make_var;
+ ($make_var) = $line =~ /\s*(\S+?)\s*[+:\?]*=.*\b$base.[co]\b/;
+ if ($make_var) {
+ if ($make_var =~ /[a-zA-Z0-9]+-[ym]/) {
+ $config = $make_var;
+ } elsif ($make_var =~ /[a-zA-Z0-9]+-objs/) {
+ $config = $make_var;
+ } else {
+ push @make_var, $make_var;
+ }
+ }
+ }
+
+ if (!$config) {
+ for $make_var (@make_var) {
+ ($config) = $line =~ /(CONFIG_[A-Za-z0-9_]+).*\b$make_var\b/;
+ last if ($config);
+ }
+ }
+
+ if (!$config) {
+ for $make_var (@make_var) {
+ ($config) = $line =~ /\s*(\S+?)\s*[+:\?]*=.*\b$make_var\b/;
+ last if ($config);
+ }
+ }
+
+ # ----- next if no config found
+
+ if (!$config) {
+ $line = "";
+ next NEXT_LINE;
+ }
+
+ for $if_config (@if_config) {
+ $config = $if_config . " && " . $config;
+ }
+
+ push @{ $driver_config{$driver} }, $config;
+
+ $line = "";
+ }
+
+ close(MAKEFILE_FILE);
+
+}
+
+
+sub find_kconfig
+{
+ my $pn_arg_ref = shift;
+ my $driver = shift;
+
+ my $lines_printed = 0;
+ my @configs;
+
+ if (!@{ $driver_config{$driver} }) {
+ &scan_makefile($pn_arg_ref, $driver);
+ if (!@{ $driver_config{$driver} }) {
+ push @{ $driver_config{$driver} }, "no_config";
+ }
+ }
+
+ @configs = @{ $driver_config{$driver} };
+
+ $$pn_arg_ref{config_cnt} = $#configs + 1;
+ for my $config (@configs) {
+ $$pn_arg_ref{config} = $config;
+ $lines_printed += &print_node($pn_arg_ref);
+ }
+
+ return $lines_printed;
+}
+
+
+sub handle_compatible()
+{
+ my $full_node = shift;
+ my $node = shift;
+ my $compatible = shift;
+ my $node_enabled = shift;
+
+ my $compat;
+ my $lines_printed = 0;
+ my %pn_arg = ();
+
+ return if (!$node or !$compatible);
+
+ # Do not process compatible property of root node,
+ # it is used to match board, not to bind a driver.
+ return if ($node eq "/");
+
+ $pn_arg{full_node} = $full_node;
+ $pn_arg{node} = $node;
+ $pn_arg{node_enabled} = $node_enabled;
+
+ my @compatibles = split('", "', $compatible);
+
+ $compatibles[0] =~ s/^"//;
+ $compatibles[$#compatibles] =~ s/"$//;
+
+ $pn_arg{compatible_cnt} = $#compatibles + 1;
+
+ COMPAT:
+ for $compat (@compatibles) {
+
+ $pn_arg{compat} = $compat;
+ $pn_arg{driver_cnt} = 0;
+ $pn_arg{white_list} = 0;
+
+ if (exists($compat_white_list{$compat})) {
+ $pn_arg{white_list} = 1;
+ $pn_arg{driver} = "no_driver";
+ $pn_arg{config_cnt} = 1;
+ $pn_arg{config} = "no_config";
+ $lines_printed += &print_node(\%pn_arg);
+ next COMPAT;
+ }
+
+ # ----- if compat previously seen, use cached info
+
+ if (exists($compat_driver{$compat})) {
+ for my $driver (@{ $compat_driver{$compat} }) {
+ $pn_arg{driver} = $driver;
+ $pn_arg{driver_cnt} = $driver_count{$compat};
+ $pn_arg{config_cnt} = $#{ $driver_config{$driver}} + 1;
+
+ for my $config (@{ $driver_config{$driver} }) {
+ $pn_arg{config} = $config;
+ $lines_printed += &print_node(\%pn_arg);
+ }
+
+ if (!@{ $driver_config{$driver} }) {
+ # no config cached yet
+ # $driver in %driver_hard_code_list
+ # but not %driver_config_hard_code_list
+ $lines_printed += &find_kconfig(\%pn_arg, $driver);
+ }
+ }
+ next COMPAT;
+ }
+
+
+ # ----- Find drivers (source files that contain compatible)
+
+ # this will miss arch/sparc/include/asm/parport.h
+ # It is better to move the compatible out of the .h
+ # than to add *.h. to the files list, because *.h generates
+ # a lot of false negatives.
+ my $files = '"*.c"';
+ my $drivers = `git grep -l '"$compat"' -- $files`;
+ chomp($drivers);
+ if ($drivers eq "") {
+ $pn_arg{driver} = "no_driver";
+ $pn_arg{config_cnt} = 1;
+ $pn_arg{config} = "no_config";
+ push @{ $compat_driver{$compat} }, "no_driver";
+ $lines_printed += &print_node(\%pn_arg);
+ next COMPAT;
+ }
+
+ my @drivers = split("\n", $drivers);
+ $driver_count{$compat} = $#drivers + 1;
+ $pn_arg{driver_cnt} = $#drivers + 1;
+
+ DRIVER:
+ for my $driver (@drivers) {
+ push @{ $compat_driver{$compat} }, $driver;
+ $pn_arg{driver} = $driver;
+
+ # ----- if driver previously seen, use cached info
+
+ $pn_arg{config_cnt} = $#{ $driver_config{$driver} } + 1;
+ for my $config (@{ $driver_config{$driver} }) {
+ $pn_arg{config} = $config;
+ $lines_printed += &print_node(\%pn_arg);
+ }
+ if (@{ $driver_config{$driver} }) {
+ next DRIVER;
+ }
+
+ if ($black_list_driver) {
+ for $black (@black_list_driver) {
+ next DRIVER if ($driver =~ /^$black$/);
+ }
+ }
+
+
+ # ----- Find Kconfig symbols that enable driver
+
+ $lines_printed += &find_kconfig(\%pn_arg, $driver);
+
+ }
+ }
+
+ # White space (line) between nodes for readability.
+ # Each node may report several compatibles.
+ # For each compatible, multiple drivers may be reported.
+ # For each driver, multiple CONFIG_ options may be reported.
+ if ($lines_printed) {
+ print "\n";
+ }
+}
+
+sub read_dts()
+{
+ my $file = shift;
+
+ my $compatible = "";
+ my $line;
+ my $node = "";
+ my $node_enabled = "";
+
+ if (! -r $file) {
+ print STDERR "file '$file' is not readable or does not exist\n";
+ exit 3;
+ }
+
+ if (!open(DT_FILE, "-|", "$dtx_diff $file")) {
+ print STDERR "\n";
+ print STDERR "shell command failed:\n";
+ print STDERR " $dtx_diff $file\n";
+ print STDERR "\n";
+ exit 3;
+ }
+
+ FILE:
+ while ($line = <DT_FILE>) {
+ chomp($line);
+
+ if ($line =~ /{/) {
+
+ &handle_compatible($full_node, $node, $compatible,
+ $node_enabled);
+
+ while ($end_node_count-- > 0) {
+ pop @full_node;
+ };
+ $end_node_count = 0;
+ $full_node = @full_node[-1];
+
+ $node = $line;
+ $node =~ s/^\s*(.*)\s+\{.*/$1/;
+ $node =~ s/.*: //;
+ if ($node eq '/' ) {
+ $full_node = '/';
+ } elsif ($full_node ne '/') {
+ $full_node = $full_node . '/' . $node;
+ } else {
+ $full_node = '/' . $node;
+ }
+ push @full_node, $full_node;
+
+ $compatible = "";
+ $node_enabled = "";
+ next FILE;
+ }
+
+ if ($line =~ /}/) {
+ $end_node_count++;
+ }
+
+ if ($line =~ /(\s+|^)status =/) {
+ $node_enabled = $line;
+ $node_enabled =~ s/^\t*//;
+ $node_enabled =~ s/^status = "//;
+ $node_enabled =~ s/";$//;
+ next FILE;
+ }
+
+ if ($line =~ /(\s+|^)compatible =/) {
+ # Extract all compatible entries for this device
+ # White space matching here and in handle_compatible() is
+ # precise, because input format is the output of dtc,
+ # which is invoked by dtx_diff.
+ $compatible = $line;
+ $compatible =~ s/^\t*//;
+ $compatible =~ s/^compatible = //;
+ $compatible =~ s/;$//;
+ }
+ }
+
+ &handle_compatible($full_node, $node, $compatible, $node_enabled);
+
+ close(DT_FILE);
+}
+
+
+sub read_config_file()
+{
+ if (! -r $config_file) {
+ print STDERR "file '$config_file' is not readable or does not exist\n";
+ exit 2;
+ }
+
+ if (!open(CONFIG_FILE, "<", "$config_file")) {
+ print STDERR "open $config_file failed\n";
+ exit 2;
+ }
+
+ my @line;
+
+ LINE:
+ while ($line = <CONFIG_FILE>) {
+ chomp($line);
+ next LINE if ($line =~ /^\s*#/);
+ next LINE if ($line =~ /^\s*$/);
+ @line = split /=/, $line;
+ $existing_config{@line[0]} = @line[1];
+ }
+
+ close(CONFIG_FILE);
+}
+
+
+sub cmd_line_err()
+{
+ my $msg = shift;
+
+ print STDERR "\n";
+ print STDERR " ERROR processing command line options\n";
+ print STDERR " $msg\n" if ($msg ne "");
+ print STDERR "\n";
+ print STDERR " For help, type '$script_name --help'\n";
+ print STDERR "\n";
+}
+
+
+# -----------------------------------------------------------------------------
+# program entry point
+
+Getopt::Long::Configure("no_ignore_case", "bundling");
+
+if (!GetOptions(
+ "c=s" => \$config_file,
+ "config=s" => \$config_file,
+ "config-format" => \$config_format,
+ "exclude-flag=s" => \@exclude_flag,
+ "h" => \$help,
+ "help" => \$help,
+ "black-list-driver" => \$black_list_driver,
+ "white-list-config" => \$white_list_config,
+ "white-list-driver" => \$white_list_driver,
+ "include-flag=s" => \@include_flag,
+ "include-suspect" => \$include_suspect,
+ "short-name" => \$short_name,
+ "show-lists" => \$show_lists,
+ "version" => \$version,
+ )) {
+
+ &cmd_line_err();
+
+ exit 1;
+}
+
+
+my $exit_after_messages = 0;
+
+if ($version) {
+ print STDERR "\n$script_name $VUFX\n\n";
+ $exit_after_messages = 1;
+}
+
+
+if ($help) {
+ &usage;
+ $exit_after_messages = 1;
+}
+
+
+if ($show_lists) {
+
+ print "\n";
+ print "These compatibles are hard coded to have no driver.\n";
+ print "\n";
+ for my $compat (sort keys %compat_white_list) {
+ print " $compat\n";
+ }
+
+
+ print "\n\n";
+ print "The driver for these compatibles is hard coded (white list).\n";
+ print "\n";
+ my $max_compat_len = 0;
+ for my $compat (sort keys %driver_hard_code_list) {
+ if (length $compat > $max_compat_len) {
+ $max_compat_len = length $compat;
+ }
+ }
+ for my $compat (sort keys %driver_hard_code_list) {
+ if (($driver ne "hardcoded_no_driver") && ($driver ne "no_driver")) {
+ my $first = 1;
+ for my $driver (@{ $driver_hard_code_list{$compat} }) {
+ if ($first) {
+ print " $compat";
+ print " " x ($max_compat_len - length $compat);
+ $first = 0;
+ } else {
+ print " ", " " x $max_compat_len;
+ }
+ print " $driver\n";
+ }
+ }
+ }
+
+
+ print "\n\n";
+ print "The configuration option for these drivers is hard coded (white list).\n";
+ print "\n";
+ my $max_driver_len = 0;
+ for my $driver (sort keys %driver_config_hard_code_list) {
+ if (length $driver > $max_driver_len) {
+ $max_driver_len = length $driver;
+ }
+ }
+ for my $driver (sort keys %driver_config_hard_code_list) {
+ if (($driver ne "hardcoded_no_driver") && ($driver ne "no_driver")) {
+ my $first = 1;
+ for my $config (@{ $driver_config_hard_code_list{$driver} }) {
+ if ($first) {
+ print " $driver";
+ print " " x ($max_driver_len - length $driver);
+ $first = 0;
+ } else {
+ print " ", " " x $max_driver_len;
+ }
+ print " $config\n";
+ }
+ }
+ }
+
+
+ print "\n\n";
+ print "These drivers are black listed.\n";
+ print "\n";
+ for my $driver (@black_list_driver) {
+ print " $driver\n";
+ }
+
+ print "\n";
+
+ $exit_after_messages = 1;
+}
+
+
+if ($exit_after_messages) {
+ exit 0;
+}
+
+
+$exclude_flag_pattern = "[";
+for my $exclude_flag (@exclude_flag) {
+ $exclude_flag_pattern = $exclude_flag_pattern . $exclude_flag;
+}
+$exclude_flag_pattern = $exclude_flag_pattern . "]";
+# clean up if empty
+$exclude_flag_pattern =~ s/^\[\]$//;
+
+
+$include_flag_pattern = "[";
+for my $include_flag (@include_flag) {
+ $include_flag_pattern = $include_flag_pattern . $include_flag;
+}
+$include_flag_pattern = $include_flag_pattern . "]";
+# clean up if empty
+$include_flag_pattern =~ s/^\[\]$//;
+
+
+if ($exclude_flag_pattern) {
+ my $found = 0;
+ for $pr_flag_value (@pr_flag_value) {
+ if ($exclude_flag_pattern =~ m/$pr_flag_value/) {
+ $found = 1;
+ }
+ }
+ if (!$found) {
+ &cmd_line_err("invalid value for FLAG in --exclude-flag\n");
+ exit 1
+ }
+}
+
+if ($include_flag_pattern) {
+ my $found = 0;
+ for $pr_flag_value (@pr_flag_value) {
+ if ($include_flag_pattern =~ m/$pr_flag_value/) {
+ $found = 1;
+ }
+ }
+ if (!$found) {
+ &cmd_line_err("invalid value for FLAG in --include-flag\n");
+ exit 1
+ }
+}
+
+if ($include_suspect) {
+ $include_flag_pattern =~ s/\[//;
+ $include_flag_pattern =~ s/\]//;
+ $include_flag_pattern = "[" . $include_flag_pattern . "A-Z]";
+}
+
+if ($exclude_flag_pattern =~ m/$include_flag_pattern/) {
+ &cmd_line_err("the same flag appears in both --exclude-flag and --include-flag or --include-suspect\n");
+ exit 1
+}
+
+
+# ($#ARGV < 0) is valid for --help, --version
+if ($#ARGV < 0) {
+ &cmd_line_err("device-tree... is required");
+ exit 1
+}
+
+
+if ($config_file) {
+ &read_config_file();
+}
+
+
+# avoid pushing duplicates for this value
+$driver = "hardcoded_no_driver";
+for $config ( @{ $driver_config_hard_code_list{$driver} } ) {
+ push @{ $driver_config{$driver} }, $config;
+}
+
+if ($white_list_driver) {
+ for my $compat (keys %driver_hard_code_list) {
+ for my $driver (@{ $driver_hard_code_list{$compat} }) {
+ push @{ $compat_driver{$compat} }, $driver;
+ if ($driver ne "hardcoded_no_driver") {
+ $driver_count{$compat} = scalar @{ $compat_driver{$compat} };
+ }
+ }
+ }
+}
+
+if ($white_list_config) {
+ for my $driver (keys %driver_config_hard_code_list) {
+ if ($driver ne "hardcoded_no_driver") {
+ for $config ( @{ $driver_config_hard_code_list{$driver} } ) {
+ push @{ $driver_config{$driver} }, $config;
+ }
+ }
+ }
+}
+
+if (-x "scripts/dtc/dtx_diff") {
+ $dtx_diff = "scripts/dtc/dtx_diff";
+} else {
+
+ print STDERR "\n";
+ print STDERR "$script_name must be run from the root directory of a Linux kernel tree\n";
+ print STDERR "\n";
+ exit 3;
+}
+
+for $file (@ARGV) {
+ &read_dts($file);
+}
diff --git a/scripts/dtc/dtx_diff b/scripts/dtc/dtx_diff
index 959ab2646d38..ec47f95991a3 100755
--- a/scripts/dtc/dtx_diff
+++ b/scripts/dtc/dtx_diff
@@ -266,7 +266,7 @@ DTC="${__KBUILD_OUTPUT}/scripts/dtc/dtc"
if [ ! -x ${DTC} ] ; then
__DTC="dtc"
- if grep -q "^CONFIG_DTC=y" ${__KBUILD_OUTPUT}/.config ; then
+ if grep -q "^CONFIG_DTC=y" ${__KBUILD_OUTPUT}/.config 2>/dev/null; then
make_command='
make scripts'
else