diff options
| -rw-r--r-- | arch/openrisc/Kconfig | 207 | ||||
| -rw-r--r-- | arch/openrisc/Makefile | 55 | ||||
| -rw-r--r-- | arch/openrisc/boot/Makefile | 15 | ||||
| -rw-r--r-- | arch/openrisc/configs/or1ksim_defconfig | 65 | ||||
| -rw-r--r-- | arch/openrisc/include/asm/Kbuild | 64 | ||||
| -rw-r--r-- | arch/openrisc/kernel/Makefile | 14 | ||||
| -rw-r--r-- | arch/openrisc/kernel/vmlinux.lds.S | 115 | ||||
| -rw-r--r-- | arch/openrisc/lib/Makefile | 5 | ||||
| -rw-r--r-- | arch/openrisc/mm/Makefile | 5 |
9 files changed, 545 insertions, 0 deletions
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig new file mode 100644 index 000000000000..4558bafbd1a2 --- /dev/null +++ b/arch/openrisc/Kconfig @@ -0,0 +1,207 @@ +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/config-language.txt. +# + +config OPENRISC + def_bool y + select OF + select OF_EARLY_FLATTREE + select HAVE_MEMBLOCK + select ARCH_WANT_OPTIONAL_GPIOLIB + select HAVE_ARCH_TRACEHOOK + select HAVE_GENERIC_HARDIRQS + select GENERIC_IRQ_CHIP + select GENERIC_IRQ_PROBE + select GENERIC_IRQ_SHOW + select GENERIC_IOMAP + +config MMU + def_bool y + +config WISHBONE_BUS_BIG_ENDIAN + def_bool y + +config SYMBOL_PREFIX + string + default "" + +config HAVE_DMA_ATTRS + def_bool y + +config UID16 + def_bool y + +config RWSEM_GENERIC_SPINLOCK + def_bool y + +config RWSEM_XCHGADD_ALGORITHM + def_bool n + +config GENERIC_HWEIGHT + def_bool y + +config GENERIC_IOMAP + def_bool y + +config NO_IOPORT + def_bool y + +config GENERIC_GPIO + def_bool y + +config GENERIC_CLOCKEVENTS + def_bool y + +config TRACE_IRQFLAGS_SUPPORT + def_bool y + +# For now, use generic checksum functions +#These can be reimplemented in assembly later if so inclined +config GENERIC_CSUM + def_bool y + +config GENERIC_FIND_NEXT_BIT + def_bool y + +source "init/Kconfig" + + +menu "Processor type and features" + +choice + prompt "Subarchitecture" + default OR1K_1200 + +config OR1K_1200 + bool "OR1200" + help + Generic OpenRISC 1200 architecture + +endchoice + +config OPENRISC_BUILTIN_DTB + string "Builtin DTB" + default "" + +menu "Class II Instructions" + +config OPENRISC_HAVE_INST_FF1 + bool "Have instruction l.ff1" + default y + help + Select this if your implementation has the Class II instruction l.ff1 + +config OPENRISC_HAVE_INST_FL1 + bool "Have instruction l.fl1" + default y + help + Select this if your implementation has the Class II instruction l.fl1 + +config OPENRISC_HAVE_INST_MUL + bool "Have instruction l.mul for hardware multiply" + default y + help + Select this if your implementation has a hardware multiply instruction + +config OPENRISC_HAVE_INST_DIV + bool "Have instruction l.div for hardware divide" + default y + help + Select this if your implementation has a hardware divide instruction +endmenu + + +source "kernel/time/Kconfig" +source kernel/Kconfig.hz +source kernel/Kconfig.preempt +source "mm/Kconfig" + +config OPENRISC_NO_SPR_SR_DSX + bool "use SPR_SR_DSX software emulation" if OR1K_1200 + default y + help + SPR_SR_DSX bit is status register bit indicating whether + the last exception has happened in delay slot. + + OpenRISC architecture makes it optional to have it implemented + in hardware and the OR1200 does not have it. + + Say N here if you know that your OpenRISC processor has + SPR_SR_DSX bit implemented. Say Y if you are unsure. + +config CMDLINE + string "Default kernel command string" + default "" + help + On some architectures there is currently no way for the boot loader + to pass arguments to the kernel. For these architectures, you should + supply some command-line options at build time by entering them + here. + +menu "Debugging options" + +config DEBUG_STACKOVERFLOW + bool "Check for kernel stack overflow" + default y + help + Make extra checks for space avaliable on stack in some + critical functions. This will cause kernel to run a bit slower, + but will catch most of kernel stack overruns and exit gracefuly. + + Say Y if you are unsure. + +config JUMP_UPON_UNHANDLED_EXCEPTION + bool "Try to die gracefully" + default y + help + Now this puts kernel into infinite loop after first oops. Till + your kernel crashes this doesn't have any influence. + + Say Y if you are unsure. + +config OPENRISC_EXCEPTION_DEBUG + bool "Print processor state at each exception" + default n + help + This option will make your kernel unusable for all but kernel + debugging. + + Say N if you are unsure. + +config OPENRISC_ESR_EXCEPTION_BUG_CHECK + bool "Check for possible ESR exception bug" + default n + help + This option enables some checks that might expose some problems + in kernel. + + Say N if you are unsure. + +endmenu + +endmenu + +menu "Executable file formats" + +source "fs/Kconfig.binfmt" + +endmenu + +source "net/Kconfig" + +source "drivers/Kconfig" + +source "fs/Kconfig" + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "lib/Kconfig" + +menu "Kernel hacking" + +source "lib/Kconfig.debug" + +endmenu diff --git a/arch/openrisc/Makefile b/arch/openrisc/Makefile new file mode 100644 index 000000000000..158ae4c0dc6c --- /dev/null +++ b/arch/openrisc/Makefile @@ -0,0 +1,55 @@ +# BK Id: %F% %I% %G% %U% %#% +# +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. Remember to do have actions +# for "archclean" and "archdep" for cleaning up and making dependencies for +# this architecture +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1994 by Linus Torvalds +# Modifications for the OpenRISC architecture: +# Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com> +# Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se> +# +# Based on: +# arch/i386/Makefile + +KBUILD_DEFCONFIG := or1ksim_defconfig + +LDFLAGS := +OBJCOPYFLAGS := -O binary -R .note -R .comment -S +LDFLAGS_vmlinux := +LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) + +KBUILD_CFLAGS += -pipe -ffixed-r10 + +ifeq ($(CONFIG_OPENRISC_HAVE_INST_MUL),y) + KBUILD_CFLAGS += $(call cc-option,-mhard-mul) +else + KBUILD_CFLAGS += $(call cc-option,-msoft-mul) +endif + +ifeq ($(CONFIG_OPENRISC_HAVE_INST_DIV),y) + KBUILD_CFLAGS += $(call cc-option,-mhard-div) +else + KBUILD_CFLAGS += $(call cc-option,-msoft-div) +endif + +head-y := arch/openrisc/kernel/head.o arch/openrisc/kernel/init_task.o + +core-y += arch/openrisc/lib/ \ + arch/openrisc/kernel/ \ + arch/openrisc/mm/ +libs-y += $(LIBGCC) + +ifneq '$(CONFIG_OPENRISC_BUILTIN_DTB)' '""' +BUILTIN_DTB := y +else +BUILTIN_DTB := n +endif +core-$(BUILTIN_DTB) += arch/openrisc/boot/ + +all: vmlinux diff --git a/arch/openrisc/boot/Makefile b/arch/openrisc/boot/Makefile new file mode 100644 index 000000000000..98ca185097a5 --- /dev/null +++ b/arch/openrisc/boot/Makefile @@ -0,0 +1,15 @@ + + +ifneq '$(CONFIG_OPENRISC_BUILTIN_DTB)' '""' +BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_OPENRISC_BUILTIN_DTB)).dtb.o +else +BUILTIN_DTB := +endif +obj-y += $(BUILTIN_DTB) + +clean-files := *.dtb.S + +#DTC_FLAGS ?= -p 1024 + +$(obj)/%.dtb: $(src)/dts/%.dts + $(call cmd,dtc) diff --git a/arch/openrisc/configs/or1ksim_defconfig b/arch/openrisc/configs/or1ksim_defconfig new file mode 100644 index 000000000000..ea172bdfa36a --- /dev/null +++ b/arch/openrisc/configs/or1ksim_defconfig @@ -0,0 +1,65 @@ +CONFIG_CROSS_COMPILE="or32-linux-" +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_RD_GZIP is not set +CONFIG_EXPERT=y +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set +# CONFIG_EPOLL is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_AIO is not set +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_SLOB=y +CONFIG_MODULES=y +# CONFIG_BLOCK is not set +CONFIG_OPENRISC_BUILTIN_DTB="or1ksim" +CONFIG_NO_HZ=y +CONFIG_HZ_100=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set +# CONFIG_TCP_CONG_CUBIC is not set +# CONFIG_TCP_CONG_WESTWOOD is not set +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +CONFIG_PROC_DEVICETREE=y +CONFIG_NETDEVICES=y +CONFIG_MICREL_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_ETHOC=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_MFD_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_DNOTIFY is not set +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set diff --git a/arch/openrisc/include/asm/Kbuild b/arch/openrisc/include/asm/Kbuild new file mode 100644 index 000000000000..11162e6c878f --- /dev/null +++ b/arch/openrisc/include/asm/Kbuild @@ -0,0 +1,64 @@ +include include/asm-generic/Kbuild.asm + +header-y += spr_defs.h + +generic-y += atomic.h +generic-y += auxvec.h +generic-y += bitsperlong.h +generic-y += bug.h +generic-y += bugs.h +generic-y += cacheflush.h +generic-y += checksum.h +generic-y += cmpxchg.h +generic-y += cmpxchg-local.h +generic-y += cpumask.h +generic-y += cputime.h +generic-y += current.h +generic-y += device.h +generic-y += div64.h +generic-y += dma.h +generic-y += emergency-restart.h +generic-y += errno.h +generic-y += fb.h +generic-y += fcntl.h +generic-y += ftrace.h +generic-y += futex.h +generic-y += hardirq.h +generic-y += hw_irq.h +generic-y += ioctl.h +generic-y += ioctls.h +generic-y += ipcbuf.h +generic-y += irq_regs.h +generic-y += kdebug.h +generic-y += kmap_types.h +generic-y += local.h +generic-y += mman.h +generic-y += module.h +generic-y += msgbuf.h +generic-y += pci.h +generic-y += percpu.h +generic-y += poll.h +generic-y += posix_types.h +generic-y += resource.h +generic-y += rmap.h +generic-y += scatterlist.h +generic-y += sections.h +generic-y += segment.h +generic-y += sembuf.h +generic-y += setup.h +generic-y += shmbuf.h +generic-y += shmparam.h +generic-y += siginfo.h +generic-y += signal.h +generic-y += socket.h +generic-y += sockios.h +generic-y += statfs.h +generic-y += stat.h +generic-y += string.h +generic-y += swab.h +generic-y += termbits.h +generic-y += termios.h +generic-y += topology.h +generic-y += types.h +generic-y += ucontext.h +generic-y += user.h diff --git a/arch/openrisc/kernel/Makefile b/arch/openrisc/kernel/Makefile new file mode 100644 index 000000000000..9a4c2706d795 --- /dev/null +++ b/arch/openrisc/kernel/Makefile @@ -0,0 +1,14 @@ +# +# Makefile for the linux kernel. +# + +extra-y := head.o vmlinux.lds init_task.o + +obj-y := setup.o idle.o or32_ksyms.o process.o dma.o \ + traps.o time.o irq.o entry.o ptrace.o signal.o sys_or32.o \ + sys_call_table.o + +obj-$(CONFIG_MODULES) += module.o +obj-$(CONFIG_OF) += prom.o + +clean: diff --git a/arch/openrisc/kernel/vmlinux.lds.S b/arch/openrisc/kernel/vmlinux.lds.S new file mode 100644 index 000000000000..2d69a853b742 --- /dev/null +++ b/arch/openrisc/kernel/vmlinux.lds.S @@ -0,0 +1,115 @@ +/* + * OpenRISC vmlinux.lds.S + * + * Linux architectural port borrowing liberally from similar works of + * others. All original copyrights apply as per the original source + * declaration. + * + * Modifications for the OpenRISC architecture: + * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com> + * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * ld script for OpenRISC architecture + */ + +/* TODO + * - clean up __offset & stuff + * - change all 8192 aligment to PAGE !!! + * - recheck if all aligments are really needed + */ + +# define LOAD_OFFSET PAGE_OFFSET +# define LOAD_BASE PAGE_OFFSET + +#include <asm/page.h> +#include <asm/cache.h> +#include <asm-generic/vmlinux.lds.h> + +OUTPUT_FORMAT("elf32-or32", "elf32-or32", "elf32-or32") +jiffies = jiffies_64 + 4; + +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = LOAD_BASE ; + + /* _s_kernel_ro must be page aligned */ + . = ALIGN(PAGE_SIZE); + _s_kernel_ro = .; + + .text : AT(ADDR(.text) - LOAD_OFFSET) + { + _stext = .; + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT + IRQENTRY_TEXT + *(.fixup) + *(.text.__*) + _etext = .; + } + /* TODO: Check if fixup and text.__* are really necessary + * fixup is definitely necessary + */ + + _sdata = .; + + /* Page alignment required for RO_DATA_SECTION */ + RO_DATA_SECTION(PAGE_SIZE) + _e_kernel_ro = .; + + /* Whatever comes after _e_kernel_ro had better be page-aligend, too */ + + /* 32 here is cacheline size... recheck this */ + RW_DATA_SECTION(32, PAGE_SIZE, PAGE_SIZE) + + _edata = .; + + EXCEPTION_TABLE(4) + NOTES + + /* Init code and data */ + . = ALIGN(PAGE_SIZE); + __init_begin = .; + + HEAD_TEXT_SECTION + + /* Page aligned */ + INIT_TEXT_SECTION(PAGE_SIZE) + + /* Align __setup_start on 16 byte boundary */ + INIT_DATA_SECTION(16) + + PERCPU_SECTION(L1_CACHE_BYTES) + + __init_end = .; + + . = ALIGN(PAGE_SIZE); + .initrd : AT(ADDR(.initrd) - LOAD_OFFSET) + { + __initrd_start = .; + *(.initrd) + __initrd_end = .; + FILL (0); + . = ALIGN (PAGE_SIZE); + } + + __vmlinux_end = .; /* last address of the physical file */ + + BSS_SECTION(0, 0, 0x20) + + _end = .; + + /* Throw in the debugging sections */ + STABS_DEBUG + DWARF_DEBUG + + /* Sections to be discarded -- must be last */ + DISCARDS +} diff --git a/arch/openrisc/lib/Makefile b/arch/openrisc/lib/Makefile new file mode 100644 index 000000000000..966f65dbc6f0 --- /dev/null +++ b/arch/openrisc/lib/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for or32 specific library files.. +# + +obj-y = string.o delay.o diff --git a/arch/openrisc/mm/Makefile b/arch/openrisc/mm/Makefile new file mode 100644 index 000000000000..324ba2634529 --- /dev/null +++ b/arch/openrisc/mm/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the linux openrisc-specific parts of the memory manager. +# + +obj-y := fault.o tlb.o init.o ioremap.o |