aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/um/Kconfig2
-rw-r--r--arch/um/drivers/Kconfig81
-rw-r--r--arch/um/drivers/chan_user.h2
-rw-r--r--arch/um/drivers/ssl.c8
-rw-r--r--arch/um/include/asm/Kbuild1
-rw-r--r--arch/um/include/asm/common.lds.S2
-rw-r--r--arch/um/include/asm/xor.h7
-rw-r--r--arch/um/kernel/dyn.lds.S1
-rw-r--r--init/Kconfig1
-rw-r--r--kernel/gcov/Kconfig2
10 files changed, 63 insertions, 44 deletions
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 6f0edd0c0220..0917f8443c28 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -189,6 +189,8 @@ config SECCOMP
config UML_TIME_TRAVEL_SUPPORT
bool
prompt "Support time-travel mode (e.g. for test execution)"
+ # inf-cpu mode is incompatible with the benchmarking
+ depends on !RAID6_PQ_BENCHMARK
help
Enable this option to support time travel inside the UML instance.
diff --git a/arch/um/drivers/Kconfig b/arch/um/drivers/Kconfig
index 388096fb45a2..72d417055782 100644
--- a/arch/um/drivers/Kconfig
+++ b/arch/um/drivers/Kconfig
@@ -147,7 +147,7 @@ config UML_NET
make use of UML networking.
config UML_NET_ETHERTAP
- bool "Ethertap transport"
+ bool "Ethertap transport (obsolete)"
depends on UML_NET
help
The Ethertap User-Mode Linux network transport allows a single
@@ -167,14 +167,13 @@ config UML_NET_ETHERTAP
has examples of the UML command line to use to enable Ethertap
networking.
- If you'd like to set up an IP network with the host and/or the
- outside world, say Y to this, the Daemon Transport and/or the
- Slip Transport. You'll need at least one of them, but may choose
- more than one without conflict. If you don't need UML networking,
- say N.
+ NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
+ migrate to UML_NET_VECTOR.
+
+ If unsure, say N.
config UML_NET_TUNTAP
- bool "TUN/TAP transport"
+ bool "TUN/TAP transport (obsolete)"
depends on UML_NET
help
The UML TUN/TAP network transport allows a UML instance to exchange
@@ -185,8 +184,13 @@ config UML_NET_TUNTAP
To use this transport, your host kernel must have support for TUN/TAP
devices, either built-in or as a module.
+ NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
+ migrate to UML_NET_VECTOR.
+
+ If unsure, say N.
+
config UML_NET_SLIP
- bool "SLIP transport"
+ bool "SLIP transport (obsolete)"
depends on UML_NET
help
The slip User-Mode Linux network transport allows a running UML to
@@ -201,16 +205,13 @@ config UML_NET_SLIP
has examples of the UML command line to use to enable slip
networking, and details of a few quirks with it.
- The Ethertap Transport is preferred over slip because of its
- limitations. If you prefer slip, however, say Y here. Otherwise
- choose the Multicast transport (to network multiple UMLs on
- multiple hosts), Ethertap (to network with the host and the
- outside world), and/or the Daemon transport (to network multiple
- UMLs on a single host). You may choose more than one without
- conflict. If you don't need UML networking, say N.
+ NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
+ migrate to UML_NET_VECTOR.
+
+ If unsure, say N.
config UML_NET_DAEMON
- bool "Daemon transport"
+ bool "Daemon transport (obsolete)"
depends on UML_NET
help
This User-Mode Linux network transport allows one or more running
@@ -225,13 +226,10 @@ config UML_NET_DAEMON
has examples of the UML command line to use to enable Daemon
networking.
- If you'd like to set up a network with other UMLs on a single host,
- say Y. If you need a network between UMLs on multiple physical
- hosts, choose the Multicast Transport. To set up a network with
- the host and/or other IP machines, say Y to the Ethertap or Slip
- transports. You'll need at least one of them, but may choose
- more than one without conflict. If you don't need UML networking,
- say N.
+ NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
+ migrate to UML_NET_VECTOR.
+
+ If unsure, say N.
config UML_NET_VECTOR
bool "Vector I/O high performance network devices"
@@ -245,7 +243,7 @@ config UML_NET_VECTOR
drivers.
config UML_NET_VDE
- bool "VDE transport"
+ bool "VDE transport (obsolete)"
depends on UML_NET
help
This User-Mode Linux network transport allows one or more running
@@ -263,11 +261,13 @@ config UML_NET_VDE
That site has a good overview of what VDE is and also examples
of the UML command line to use to enable VDE networking.
- If you need UML networking with VDE,
- say Y.
+ NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
+ migrate to UML_NET_VECTOR.
+
+ If unsure, say N.
config UML_NET_MCAST
- bool "Multicast transport"
+ bool "Multicast transport (obsolete)"
depends on UML_NET
help
This Multicast User-Mode Linux network transport allows multiple
@@ -284,15 +284,13 @@ config UML_NET_MCAST
has examples of the UML command line to use to enable Multicast
networking, and notes about the security of this approach.
- If you need UMLs on multiple physical hosts to communicate as if
- they shared an Ethernet network, say Y. If you need to communicate
- with other IP machines, make sure you select one of the other
- transports (possibly in addition to Multicast; they're not
- exclusive). If you don't need to network UMLs say N to each of
- the transports.
+ NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
+ migrate to UML_NET_VECTOR.
+
+ If unsure, say N.
config UML_NET_PCAP
- bool "pcap transport"
+ bool "pcap transport (obsolete)"
depends on UML_NET
help
The pcap transport makes a pcap packet stream on the host look
@@ -304,11 +302,13 @@ config UML_NET_PCAP
<http://user-mode-linux.sourceforge.net/old/networking.html> That site
has examples of the UML command line to use to enable this option.
- If you intend to use UML as a network monitor for the host, say
- Y here. Otherwise, say N.
+ NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
+ migrate to UML_NET_VECTOR.
+
+ If unsure, say N.
config UML_NET_SLIRP
- bool "SLiRP transport"
+ bool "SLiRP transport (obsolete)"
depends on UML_NET
help
The SLiRP User-Mode Linux network transport allows a running UML
@@ -328,9 +328,10 @@ config UML_NET_SLIRP
that of a host behind a firewall that masquerades all network
connections passing through it (but is less secure).
- To use this you should first have slirp compiled somewhere
- accessible on the host, and have read its documentation. If you
- don't need UML networking, say N.
+ NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
+ migrate to UML_NET_VECTOR.
+
+ If unsure, say N.
Startup example: "eth0=slirp,FE:FD:01:02:03:04,/usr/local/bin/slirp"
diff --git a/arch/um/drivers/chan_user.h b/arch/um/drivers/chan_user.h
index 72222bb036f5..4e51b85e2a23 100644
--- a/arch/um/drivers/chan_user.h
+++ b/arch/um/drivers/chan_user.h
@@ -11,7 +11,7 @@
struct chan_opts {
void (*const announce)(char *dev_name, int dev);
char *xterm_title;
- const int raw;
+ int raw;
};
struct chan_ops {
diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c
index b213201b8a3b..26c5716fac0f 100644
--- a/arch/um/drivers/ssl.c
+++ b/arch/um/drivers/ssl.c
@@ -196,3 +196,11 @@ static int ssl_chan_setup(char *str)
__setup("ssl", ssl_chan_setup);
__channel_help(ssl_chan_setup, "ssl");
+
+static int ssl_non_raw_setup(char *str)
+{
+ opts.raw = 0;
+ return 1;
+}
+__setup("ssl-non-raw", ssl_non_raw_setup);
+__channel_help(ssl_non_raw_setup, "set serial lines to non-raw mode");
diff --git a/arch/um/include/asm/Kbuild b/arch/um/include/asm/Kbuild
index 398006d27e40..db7d9d4e30d8 100644
--- a/arch/um/include/asm/Kbuild
+++ b/arch/um/include/asm/Kbuild
@@ -25,5 +25,4 @@ generic-y += switch_to.h
generic-y += topology.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h
-generic-y += xor.h
generic-y += kprobes.h
diff --git a/arch/um/include/asm/common.lds.S b/arch/um/include/asm/common.lds.S
index 7145ce699982..eca6c452a41b 100644
--- a/arch/um/include/asm/common.lds.S
+++ b/arch/um/include/asm/common.lds.S
@@ -82,8 +82,8 @@
__preinit_array_end = .;
}
.init_array : {
- /* dummy - we call this ourselves */
__init_array_start = .;
+ *(.init_array)
__init_array_end = .;
}
.fini_array : {
diff --git a/arch/um/include/asm/xor.h b/arch/um/include/asm/xor.h
new file mode 100644
index 000000000000..7a3208c47cfc
--- /dev/null
+++ b/arch/um/include/asm/xor.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <asm-generic/xor.h>
+#include <shared/timer-internal.h>
+
+/* pick an arbitrary one - measuring isn't possible with inf-cpu */
+#define XOR_SELECT_TEMPLATE(x) \
+ (time_travel_mode == TT_MODE_INFCPU ? &xor_block_8regs : NULL)
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index c69d69ee96be..f5001481010c 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -103,6 +103,7 @@ SECTIONS
be empty, which isn't pretty. */
. = ALIGN(32 / 8);
.preinit_array : { *(.preinit_array) }
+ .init_array : { *(.init_array) }
.fini_array : { *(.fini_array) }
.data : {
INIT_TASK_DATA(KERNEL_STACK_SIZE)
diff --git a/init/Kconfig b/init/Kconfig
index 303b41369181..24b23d843df1 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -54,6 +54,7 @@ config CC_DISABLE_WARN_MAYBE_UNINITIALIZED
config CONSTRUCTORS
bool
+ depends on !UML
config IRQ_WORK
bool
diff --git a/kernel/gcov/Kconfig b/kernel/gcov/Kconfig
index 060e8e726755..3941a9c48f83 100644
--- a/kernel/gcov/Kconfig
+++ b/kernel/gcov/Kconfig
@@ -4,7 +4,7 @@ menu "GCOV-based kernel profiling"
config GCOV_KERNEL
bool "Enable gcov-based kernel profiling"
depends on DEBUG_FS
- select CONSTRUCTORS
+ select CONSTRUCTORS if !UML
default n
---help---
This option enables gcov-based code profiling (e.g. for code coverage