diff options
| -rw-r--r-- | drivers/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwtracing/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/hwtracing/ptt/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/hwtracing/ptt/Makefile | 2 | ||||
| -rw-r--r-- | drivers/hwtracing/ptt/hisi_ptt.c | 916 | ||||
| -rw-r--r-- | drivers/hwtracing/ptt/hisi_ptt.h | 177 |
6 files changed, 1110 insertions, 0 deletions
diff --git a/drivers/Makefile b/drivers/Makefile index 057857258bfd..bdf1c66141c9 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -175,6 +175,7 @@ obj-$(CONFIG_USB4) += thunderbolt/ obj-$(CONFIG_CORESIGHT) += hwtracing/coresight/ obj-y += hwtracing/intel_th/ obj-$(CONFIG_STM) += hwtracing/stm/ +obj-$(CONFIG_HISI_PTT) += hwtracing/ptt/ obj-y += android/ obj-$(CONFIG_NVMEM) += nvmem/ obj-$(CONFIG_FPGA) += fpga/ diff --git a/drivers/hwtracing/Kconfig b/drivers/hwtracing/Kconfig index 13085835a636..911ee977103c 100644 --- a/drivers/hwtracing/Kconfig +++ b/drivers/hwtracing/Kconfig @@ -5,4 +5,6 @@ source "drivers/hwtracing/stm/Kconfig" source "drivers/hwtracing/intel_th/Kconfig" +source "drivers/hwtracing/ptt/Kconfig" + endmenu diff --git a/drivers/hwtracing/ptt/Kconfig b/drivers/hwtracing/ptt/Kconfig new file mode 100644 index 000000000000..6d46a09ffeb9 --- /dev/null +++ b/drivers/hwtracing/ptt/Kconfig @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0-only +config HISI_PTT + tristate "HiSilicon PCIe Tune and Trace Device" + depends on ARM64 || (COMPILE_TEST && 64BIT) + depends on PCI && HAS_DMA && HAS_IOMEM && PERF_EVENTS + help + HiSilicon PCIe Tune and Trace device exists as a PCIe RCiEP + device, and it provides support for PCIe traffic tuning and + tracing TLP headers to the memory. + + This driver can also be built as a module. If so, the module + will be called hisi_ptt. diff --git a/drivers/hwtracing/ptt/Makefile b/drivers/hwtracing/ptt/Makefile new file mode 100644 index 000000000000..908c09a98161 --- /dev/null +++ b/drivers/hwtracing/ptt/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_HISI_PTT) += hisi_ptt.o diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c new file mode 100644 index 000000000000..1a56b31b921a --- /dev/null +++ b/drivers/hwtracing/ptt/hisi_ptt.c @@ -0,0 +1,916 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for HiSilicon PCIe tune and trace device + * + * Copyright (c) 2022 HiSilicon Technologies Co., Ltd. + * Author: Yicong Yang <yangyicong@hisilicon.com> + */ + +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/cpuhotplug.h> +#include <linux/delay.h> +#include <linux/dma-iommu.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iommu.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/sysfs.h> +#include <linux/vmalloc.h> + +#include "hisi_ptt.h" + +/* Dynamic CPU hotplug state used by PTT */ +static enum cpuhp_state hisi_ptt_pmu_online; + +static u16 hisi_ptt_get_filter_val(u16 devid, bool is_port) +{ + if (is_port) + return BIT(HISI_PCIE_CORE_PORT_ID(devid & 0xff)); + + return devid; +} + +static bool hisi_ptt_wait_trace_hw_idle(struct hisi_ptt *hisi_ptt) +{ + u32 val; + + return !readl_poll_timeout_atomic(hisi_ptt->iobase + HISI_PTT_TRACE_STS, + val, val & HISI_PTT_TRACE_IDLE, + HISI_PTT_WAIT_POLL_INTERVAL_US, + HISI_PTT_WAIT_TRACE_TIMEOUT_US); +} + +static void hisi_ptt_wait_dma_reset_done(struct hisi_ptt *hisi_ptt) +{ + u32 val; + + readl_poll_timeout_atomic(hisi_ptt->iobase + HISI_PTT_TRACE_WR_STS, + val, !val, HISI_PTT_RESET_POLL_INTERVAL_US, + HISI_PTT_RESET_TIMEOUT_US); +} + +static void hisi_ptt_trace_end(struct hisi_ptt *hisi_ptt) +{ + writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL); + hisi_ptt->trace_ctrl.started = false; +} + +static int hisi_ptt_trace_start(struct hisi_ptt *hisi_ptt) +{ + struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl; + u32 val; + int i; + + /* Check device idle before start trace */ + if (!hisi_ptt_wait_trace_hw_idle(hisi_ptt)) { + pci_err(hisi_ptt->pdev, "Failed to start trace, the device is still busy\n"); + return -EBUSY; + } + + ctrl->started = true; + + /* Reset the DMA before start tracing */ + val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL); + val |= HISI_PTT_TRACE_CTRL_RST; + writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL); + + hisi_ptt_wait_dma_reset_done(hisi_ptt); + + val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL); + val &= ~HISI_PTT_TRACE_CTRL_RST; + writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL); + + /* Reset the index of current buffer */ + hisi_ptt->trace_ctrl.buf_index = 0; + + /* Zero the trace buffers */ + for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; i++) + memset(ctrl->trace_buf[i].addr, 0, HISI_PTT_TRACE_BUF_SIZE); + + /* Clear the interrupt status */ + writel(HISI_PTT_TRACE_INT_STAT_MASK, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT); + writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_INT_MASK); + + /* Set the trace control register */ + val = FIELD_PREP(HISI_PTT_TRACE_CTRL_TYPE_SEL, ctrl->type); + val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_RXTX_SEL, ctrl->direction); + val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_DATA_FORMAT, ctrl->format); + val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_TARGET_SEL, hisi_ptt->trace_ctrl.filter); + if (!hisi_ptt->trace_ctrl.is_port) + val |= HISI_PTT_TRACE_CTRL_FILTER_MODE; + + /* Start the Trace */ + val |= HISI_PTT_TRACE_CTRL_EN; + writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL); + + return 0; +} + +static int hisi_ptt_update_aux(struct hisi_ptt *hisi_ptt, int index, bool stop) +{ + struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl; + struct perf_output_handle *handle = &ctrl->handle; + struct perf_event *event = handle->event; + struct hisi_ptt_pmu_buf *buf; + size_t size; + void *addr; + + buf = perf_get_aux(handle); + if (!buf || !handle->size) + return -EINVAL; + + addr = ctrl->trace_buf[ctrl->buf_index].addr; + + /* + * If we're going to stop, read the size of already traced data from + * HISI_PTT_TRACE_WR_STS. Otherwise we're coming from the interrupt, + * the data size is always HISI_PTT_TRACE_BUF_SIZE. + */ + if (stop) { + u32 reg; + + reg = readl(hisi_ptt->iobase + HISI_PTT_TRACE_WR_STS); + size = FIELD_GET(HISI_PTT_TRACE_WR_STS_WRITE, reg); + } else { + size = HISI_PTT_TRACE_BUF_SIZE; + } + + memcpy(buf->base + buf->pos, addr, size); + buf->pos += size; + + /* + * Just commit the traced data if we're going to stop. Otherwise if the + * resident AUX buffer cannot contain the data of next trace buffer, + * apply a new one. + */ + if (stop) { + perf_aux_output_end(handle, buf->pos); + } else if (buf->length - buf->pos < HISI_PTT_TRACE_BUF_SIZE) { + perf_aux_output_end(handle, buf->pos); + + buf = perf_aux_output_begin(handle, event); + if (!buf) + return -EINVAL; + + buf->pos = handle->head % buf->length; + if (buf->length - buf->pos < HISI_PTT_TRACE_BUF_SIZE) { + perf_aux_output_end(handle, 0); + return -EINVAL; + } + } + + return 0; +} + +static irqreturn_t hisi_ptt_isr(int irq, void *context) +{ + struct hisi_ptt *hisi_ptt = context; + u32 status, buf_idx; + + status = readl(hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT); + if (!(status & HISI_PTT_TRACE_INT_STAT_MASK)) + return IRQ_NONE; + + buf_idx = ffs(status) - 1; + + /* Clear the interrupt status of buffer @buf_idx */ + writel(status, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT); + + /* + * Update the AUX buffer and cache the current buffer index, + * as we need to know this and save the data when the trace + * is ended out of the interrupt handler. End the trace + * if the updating fails. + */ + if (hisi_ptt_update_aux(hisi_ptt, buf_idx, false)) + hisi_ptt_trace_end(hisi_ptt); + else + hisi_ptt->trace_ctrl.buf_index = (buf_idx + 1) % HISI_PTT_TRACE_BUF_CNT; + + return IRQ_HANDLED; +} + +static void hisi_ptt_irq_free_vectors(void *pdev) +{ + pci_free_irq_vectors(pdev); +} + +static int hisi_ptt_register_irq(struct hisi_ptt *hisi_ptt) +{ + struct pci_dev *pdev = hisi_ptt->pdev; + int ret; + + ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI); + if (ret < 0) { + pci_err(pdev, "failed to allocate irq vector, ret = %d\n", ret); + return ret; + } + + ret = devm_add_action_or_reset(&pdev->dev, hisi_ptt_irq_free_vectors, pdev); + if (ret < 0) + return ret; + + ret = devm_request_threaded_irq(&pdev->dev, + pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ), + NULL, hisi_ptt_isr, 0, + DRV_NAME, hisi_ptt); + if (ret) { + pci_err(pdev, "failed to request irq %d, ret = %d\n", + pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ), ret); + return ret; + } + + return 0; +} + +static int hisi_ptt_init_filters(struct pci_dev *pdev, void *data) +{ + struct hisi_ptt_filter_desc *filter; + struct hisi_ptt *hisi_ptt = data; + + /* + * We won't fail the probe if filter allocation failed here. The filters + * should be partial initialized and users would know which filter fails + * through the log. Other functions of PTT device are still available. + */ + filter = kzalloc(sizeof(*filter), GFP_KERNEL); + if (!filter) { + pci_err(hisi_ptt->pdev, "failed to add filter %s\n", pci_name(pdev)); + return -ENOMEM; + } + + filter->devid = PCI_DEVID(pdev->bus->number, pdev->devfn); + + if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT) { + filter->is_port = true; + list_add_tail(&filter->list, &hisi_ptt->port_filters); + + /* Update the available port mask */ + hisi_ptt->port_mask |= hisi_ptt_get_filter_val(filter->devid, true); + } else { + list_add_tail(&filter->list, &hisi_ptt->req_filters); + } + + return 0; +} + +static void hisi_ptt_release_filters(void *data) +{ + struct hisi_ptt_filter_desc *filter, *tmp; + struct hisi_ptt *hisi_ptt = data; + + list_for_each_entry_safe(filter, tmp, &hisi_ptt->req_filters, list) { + list_del(&filter->list); + kfree(filter); + } + + list_for_each_entry_safe(filter, tmp, &hisi_ptt->port_filters, list) { + list_del(&filter->list); + kfree(filter); + } +} + +static int hisi_ptt_config_trace_buf(struct hisi_ptt *hisi_ptt) +{ + struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl; + struct device *dev = &hisi_ptt->pdev->dev; + int i; + + ctrl->trace_buf = devm_kcalloc(dev, HISI_PTT_TRACE_BUF_CNT, + sizeof(*ctrl->trace_buf), GFP_KERNEL); + if (!ctrl->trace_buf) + return -ENOMEM; + + for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; ++i) { + ctrl->trace_buf[i].addr = dmam_alloc_coherent(dev, HISI_PTT_TRACE_BUF_SIZE, + &ctrl->trace_buf[i].dma, + GFP_KERNEL); + if (!ctrl->trace_buf[i].addr) + return -ENOMEM; + } + + /* Configure the trace DMA buffer */ + for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; i++) { + writel(lower_32_bits(ctrl->trace_buf[i].dma), + hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_LO_0 + + i * HISI_PTT_TRACE_ADDR_STRIDE); + writel(upper_32_bits(ctrl->trace_buf[i].dma), + hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_HI_0 + + i * HISI_PTT_TRACE_ADDR_STRIDE); + } + writel(HISI_PTT_TRACE_BUF_SIZE, hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_SIZE); + + return 0; +} + +static int hisi_ptt_init_ctrls(struct hisi_ptt *hisi_ptt) +{ + struct pci_dev *pdev = hisi_ptt->pdev; + struct pci_bus *bus; + int ret; + u32 reg; + + INIT_LIST_HEAD(&hisi_ptt->port_filters); + INIT_LIST_HEAD(&hisi_ptt->req_filters); + + ret = hisi_ptt_config_trace_buf(hisi_ptt); + if (ret) + return ret; + + /* + * The device range register provides the information about the root + * ports which the RCiEP can control and trace. The RCiEP and the root + * ports which it supports are on the same PCIe core, with same domain + * number but maybe different bus number. The device range register + * will tell us which root ports we can support, Bit[31:16] indicates + * the upper BDF numbers of the root port, while Bit[15:0] indicates + * the lower. + */ + reg = readl(hisi_ptt->iobase + HISI_PTT_DEVICE_RANGE); + hisi_ptt->upper_bdf = FIELD_GET(HISI_PTT_DEVICE_RANGE_UPPER, reg); + hisi_ptt->lower_bdf = FIELD_GET(HISI_PTT_DEVICE_RANGE_LOWER, reg); + + bus = pci_find_bus(pci_domain_nr(pdev->bus), PCI_BUS_NUM(hisi_ptt->upper_bdf)); + if (bus) + pci_walk_bus(bus, hisi_ptt_init_filters, hisi_ptt); + + ret = devm_add_action_or_reset(&pdev->dev, hisi_ptt_release_filters, hisi_ptt); + if (ret) + return ret; + + hisi_ptt->trace_ctrl.on_cpu = -1; + return 0; +} + +static ssize_t cpumask_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct hisi_ptt *hisi_ptt = to_hisi_ptt(dev_get_drvdata(dev)); + const cpumask_t *cpumask = cpumask_of_node(dev_to_node(&hisi_ptt->pdev->dev)); + + return cpumap_print_to_pagebuf(true, buf, cpumask); +} +static DEVICE_ATTR_RO(cpumask); + +static struct attribute *hisi_ptt_cpumask_attrs[] = { + &dev_attr_cpumask.attr, + NULL +}; + +static const struct attribute_group hisi_ptt_cpumask_attr_group = { + .attrs = hisi_ptt_cpumask_attrs, +}; + +/* + * Bit 19 indicates the filter type, 1 for Root Port filter and 0 for Requester + * filter. Bit[15:0] indicates the filter value, for Root Port filter it's + * a bit mask of desired ports and for Requester filter it's the Requester ID + * of the desired PCIe function. Bit[18:16] is reserved for extension. + * + * See hisi_ptt.rst documentation for detailed information. + */ +PMU_FORMAT_ATTR(filter, "config:0-19"); +PMU_FORMAT_ATTR(direction, "config:20-23"); +PMU_FORMAT_ATTR(type, "config:24-31"); +PMU_FORMAT_ATTR(format, "config:32-35"); + +static struct attribute *hisi_ptt_pmu_format_attrs[] = { + &format_attr_filter.attr, + &format_attr_direction.attr, + &format_attr_type.attr, + &format_attr_format.attr, + NULL +}; + +static struct attribute_group hisi_ptt_pmu_format_group = { + .name = "format", + .attrs = hisi_ptt_pmu_format_attrs, +}; + +static const struct attribute_group *hisi_ptt_pmu_groups[] = { + &hisi_ptt_cpumask_attr_group, + &hisi_ptt_pmu_format_group, + NULL +}; + +static int hisi_ptt_trace_valid_direction(u32 val) +{ + /* + * The direction values have different effects according to the data + * format (specified in the parentheses). TLP set A/B means different + * set of TLP types. See hisi_ptt.rst documentation for more details. + */ + static const u32 hisi_ptt_trace_available_direction[] = { + 0, /* inbound(4DW) or reserved(8DW) */ + 1, /* outbound(4DW) */ + 2, /* {in, out}bound(4DW) or inbound(8DW), TLP set A */ + 3, /* {in, out}bound(4DW) or inbound(8DW), TLP set B */ + }; + int i; + + for (i = 0; i < ARRAY_SIZE(hisi_ptt_trace_available_direction); i++) { + if (val == hisi_ptt_trace_available_direction[i]) + return 0; + } + + return -EINVAL; +} + +static int hisi_ptt_trace_valid_type(u32 val) +{ + /* Different types can be set simultaneously */ + static const u32 hisi_ptt_trace_available_type[] = { + 1, /* posted_request */ + 2, /* non-posted_request */ + 4, /* completion */ + }; + int i; + + if (!val) + return -EINVAL; + + /* + * Walk the available list and clear the valid bits of + * the config. If there is any resident bit after the + * walk then the config is invalid. + */ + for (i = 0; i < ARRAY_SIZE(hisi_ptt_trace_available_type); i++) + val &= ~hisi_ptt_trace_available_type[i]; + + if (val) + return -EINVAL; + + return 0; +} + +static int hisi_ptt_trace_valid_format(u32 val) +{ + static const u32 hisi_ptt_trace_availble_format[] = { + 0, /* 4DW */ + 1, /* 8DW */ + }; + int i; + + for (i = 0; i < ARRAY_SIZE(hisi_ptt_trace_availble_format); i++) { + if (val == hisi_ptt_trace_availble_format[i]) + return 0; + } + + return -EINVAL; +} + +static int hisi_ptt_trace_valid_filter(struct hisi_ptt *hisi_ptt, u64 config) +{ + unsigned long val, port_mask = hisi_ptt->port_mask; + struct hisi_ptt_filter_desc *filter; + + hisi_ptt->trace_ctrl.is_port = FIELD_GET(HISI_PTT_PMU_FILTER_IS_PORT, config); + val = FIELD_GET(HISI_PTT_PMU_FILTER_VAL_MASK, config); + + /* + * Port filters are defined as bit mask. For port filters, check + * the bits in the @val are within the range of hisi_ptt->port_mask + * and whether it's empty or not, otherwise user has specified + * some unsupported root ports. + * + * For Requester ID filters, walk the available filter list to see + * whether we have one matched. + */ + if (!hisi_ptt->trace_ctrl.is_port) { + list_for_each_entry(filter, &hisi_ptt->req_filters, list) { + if (val == hisi_ptt_get_filter_val(filter->devid, filter->is_port)) + return 0; + } + } else if (bitmap_subset(&val, &port_mask, BITS_PER_LONG)) { + return 0; + } + + return -EINVAL; +} + +static void hisi_ptt_pmu_init_configs(struct hisi_ptt *hisi_ptt, struct perf_event *event) +{ + struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl; + u32 val; + + val = FIELD_GET(HISI_PTT_PMU_FILTER_VAL_MASK, event->attr.config); + hisi_ptt->trace_ctrl.filter = val; + + val = FIELD_GET(HISI_PTT_PMU_DIRECTION_MASK, event->attr.config); + ctrl->direction = val; + + val = FIELD_GET(HISI_PTT_PMU_TYPE_MASK, event->attr.config); + ctrl->type = val; + + val = FIELD_GET(HISI_PTT_PMU_FORMAT_MASK, event->attr.config); + ctrl->format = val; +} + +static int hisi_ptt_pmu_event_init(struct perf_event *event) +{ + struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu); + int ret; + u32 val; + + if (event->cpu < 0) { + dev_dbg(event->pmu->dev, "Per-task mode not supported\n"); + return -EOPNOTSUPP; + } + + if (event->attr.type != hisi_ptt->hisi_ptt_pmu.type) + return -ENOENT; + + ret = hisi_ptt_trace_valid_filter(hisi_ptt, event->attr.config); + if (ret < 0) + return ret; + + val = FIELD_GET(HISI_PTT_PMU_DIRECTION_MASK, event->attr.config); + ret = hisi_ptt_trace_valid_direction(val); + if (ret < 0) + return ret; + + val = FIELD_GET(HISI_PTT_PMU_TYPE_MASK, event->attr.config); + ret = hisi_ptt_trace_valid_type(val); + if (ret < 0) + return ret; + + val = FIELD_GET(HISI_PTT_PMU_FORMAT_MASK, event->attr.config); + return hisi_ptt_trace_valid_format(val); +} + +static void *hisi_ptt_pmu_setup_aux(struct perf_event *event, void **pages, + int nr_pages, bool overwrite) +{ + struct hisi_ptt_pmu_buf *buf; + struct page **pagelist; + int i; + + if (overwrite) { + dev_warn(event->pmu->dev, "Overwrite mode is not supported\n"); + return NULL; + } + + /* If the pages size less than buffers, we cannot start trace */ + if (nr_pages < HISI_PTT_TRACE_TOTAL_BUF_SIZE / PAGE_SIZE) + return NULL; + + buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) + return NULL; + + pagelist = kcalloc(nr_pages, sizeof(*pagelist), GFP_KERNEL); + if (!pagelist) + goto err; + + for (i = 0; i < nr_pages; i++) + pagelist[i] = virt_to_page(pages[i]); + + buf->base = vmap(pagelist, nr_pages, VM_MAP, PAGE_KERNEL); + if (!buf->base) { + kfree(pagelist); + goto err; + } + + buf->nr_pages = nr_pages; + buf->length = nr_pages * PAGE_SIZE; + buf->pos = 0; + + kfree(pagelist); + return buf; +err: + kfree(buf); + return NULL; +} + +static void hisi_ptt_pmu_free_aux(void *aux) +{ + struct hisi_ptt_pmu_buf *buf = aux; + + vunmap(buf->base); + kfree(buf); +} + +static void hisi_ptt_pmu_start(struct perf_event *event, int flags) +{ + struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu); + struct perf_output_handle *handle = &hisi_ptt->trace_ctrl.handle; + struct hw_perf_event *hwc = &event->hw; + struct device *dev = event->pmu->dev; + struct hisi_ptt_pmu_buf *buf; + int cpu = event->cpu; + int ret; + + hwc->state = 0; + + /* Serialize the perf process if user specified several CPUs */ + spin_lock(&hisi_ptt->pmu_lock); + if (hisi_ptt->trace_ctrl.started) { + dev_dbg(dev, "trace has already started\n"); + goto stop; + } + + /* + * Handle the interrupt on the same cpu which starts the trace to avoid + * context mismatch. Otherwise we'll trigger the WARN from the perf + * core in event_function_local(). If CPU passed is offline we'll fail + * here, just log it since we can do nothing here. + */ + ret = irq_set_affinity(pci_irq_vector(hisi_ptt->pdev, HISI_PTT_TRACE_DMA_IRQ), + cpumask_of(cpu)); + if (ret) + dev_warn(dev, "failed to set the affinity of trace interrupt\n"); + + hisi_ptt->trace_ctrl.on_cpu = cpu; + + buf = perf_aux_output_begin(handle, event); + if (!buf) { + dev_dbg(dev, "aux output begin failed\n"); + goto stop; + } + + buf->pos = handle->head % buf->length; + + hisi_ptt_pmu_init_configs(hisi_ptt, event); + + ret = hisi_ptt_trace_start(hisi_ptt); + if (ret) { + dev_dbg(dev, "trace start failed, ret = %d\n", ret); + perf_aux_output_end(handle, 0); + goto stop; + } + + spin_unlock(&hisi_ptt->pmu_lock); + return; +stop: + event->hw.state |= PERF_HES_STOPPED; + spin_unlock(&hisi_ptt->pmu_lock); +} + +static void hisi_ptt_pmu_stop(struct perf_event *event, int flags) +{ + struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu); + struct hw_perf_event *hwc = &event->hw; + + if (hwc->state & PERF_HES_STOPPED) + return; + + spin_lock(&hisi_ptt->pmu_lock); + if (hisi_ptt->trace_ctrl.started) { + hisi_ptt_trace_end(hisi_ptt); + + if (!hisi_ptt_wait_trace_hw_idle(hisi_ptt)) + dev_warn(event->pmu->dev, "Device is still busy\n"); + + hisi_ptt_update_aux(hisi_ptt, hisi_ptt->trace_ctrl.buf_index, true); + } + spin_unlock(&hisi_ptt->pmu_lock); + + hwc->state |= PERF_HES_STOPPED; + perf_event_update_userpage(event); + hwc->state |= PERF_HES_UPTODATE; +} + +static int hisi_ptt_pmu_add(struct perf_event *event, int flags) +{ + struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu); + struct hw_perf_event *hwc = &event->hw; + int cpu = event->cpu; + + /* Only allow the cpus on the device's node to add the event */ + if (!cpumask_test_cpu(cpu, cpumask_of_node(dev_to_node(&hisi_ptt->pdev->dev)))) + return 0; + + hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; + + if (flags & PERF_EF_START) { + hisi_ptt_pmu_start(event, PERF_EF_RELOAD); + if (hwc->state & PERF_HES_STOPPED) + return -EINVAL; + } + + return 0; +} + +static void hisi_ptt_pmu_del(struct perf_event *event, int flags) +{ + hisi_ptt_pmu_stop(event, PERF_EF_UPDATE); +} + +static void hisi_ptt_remove_cpuhp_instance(void *hotplug_node) +{ + cpuhp_state_remove_instance_nocalls(hisi_ptt_pmu_online, hotplug_node); +} + +static void hisi_ptt_unregister_pmu(void *pmu) +{ + perf_pmu_unregister(pmu); +} + +static int hisi_ptt_register_pmu(struct hisi_ptt *hisi_ptt) +{ + u16 core_id, sicl_id; + char *pmu_name; + u32 reg; + int ret; + + ret = cpuhp_state_add_instance_nocalls(hisi_ptt_pmu_online, + &hisi_ptt->hotplug_node); + if (ret) + return ret; + + ret = devm_add_action_or_reset(&hisi_ptt->pdev->dev, + hisi_ptt_remove_cpuhp_instance, + &hisi_ptt->hotplug_node); + if (ret) + return ret; + + spin_lock_init(&hisi_ptt->pmu_lock); + + hisi_ptt->hisi_ptt_pmu = (struct pmu) { + .module = THIS_MODULE, + .capabilities = PERF_PMU_CAP_EXCLUSIVE | PERF_PMU_CAP_ITRACE, + .task_ctx_nr = perf_sw_context, + .attr_groups = hisi_ptt_pmu_groups, + .event_init = hisi_ptt_pmu_event_init, + .setup_aux = hisi_ptt_pmu_setup_aux, + .free_aux = hisi_ptt_pmu_free_aux, + .start = hisi_ptt_pmu_start, + .stop = hisi_ptt_pmu_stop, + .add = hisi_ptt_pmu_add, + .del = hisi_ptt_pmu_del, + }; + + reg = readl(hisi_ptt->iobase + HISI_PTT_LOCATION); + core_id = FIELD_GET(HISI_PTT_CORE_ID, reg); + sicl_id = FIELD_GET(HISI_PTT_SICL_ID, reg); + + pmu_name = devm_kasprintf(&hisi_ptt->pdev->dev, GFP_KERNEL, "hisi_ptt%u_%u", + sicl_id, core_id); + if (!pmu_name) + return -ENOMEM; + + ret = perf_pmu_register(&hisi_ptt->hisi_ptt_pmu, pmu_name, -1); + if (ret) + return ret; + + return devm_add_action_or_reset(&hisi_ptt->pdev->dev, + hisi_ptt_unregister_pmu, + &hisi_ptt->hisi_ptt_pmu); +} + +/* + * The DMA of PTT trace can only use direct mappings due to some + * hardware restriction. Check whether there is no IOMMU or the + * policy of the IOMMU domain is passthrough, otherwise the trace + * cannot work. + * + * The PTT device is supposed to behind an ARM SMMUv3, which + * should have passthrough the device by a quirk. + */ +static int hisi_ptt_check_iommu_mapping(struct pci_dev *pdev) +{ + struct iommu_domain *iommu_domain; + + iommu_domain = iommu_get_domain_for_dev(&pdev->dev); + if (!iommu_domain || iommu_domain->type == IOMMU_DOMAIN_IDENTITY) + return 0; + + return -EOPNOTSUPP; +} + +static int hisi_ptt_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct hisi_ptt *hisi_ptt; + int ret; + + ret = hisi_ptt_check_iommu_mapping(pdev); + if (ret) { + pci_err(pdev, "requires direct DMA mappings\n"); + return ret; + } + + hisi_ptt = devm_kzalloc(&pdev->dev, sizeof(*hisi_ptt), GFP_KERNEL); + if (!hisi_ptt) + return -ENOMEM; + + hisi_ptt->pdev = pdev; + pci_set_drvdata(pdev, hisi_ptt); + + ret = pcim_enable_device(pdev); + if (ret) { + pci_err(pdev, "failed to enable device, ret = %d\n", ret); + return ret; + } + + ret = pcim_iomap_regions(pdev, BIT(2), DRV_NAME); + if (ret) { + pci_err(pdev, "failed to remap io memory, ret = %d\n", ret); + return ret; + } + + hisi_ptt->iobase = pcim_iomap_table(pdev)[2]; + + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); + if (ret) { + pci_err(pdev, "failed to set 64 bit dma mask, ret = %d\n", ret); + return ret; + } + + pci_set_master(pdev); + + ret = hisi_ptt_register_irq(hisi_ptt); + if (ret) + return ret; + + ret = hisi_ptt_init_ctrls(hisi_ptt); + if (ret) { + pci_err(pdev, "failed to init controls, ret = %d\n", ret); + return ret; + } + + ret = hisi_ptt_register_pmu(hisi_ptt); + if (ret) { + pci_err(pdev, "failed to register PMU device, ret = %d", ret); + return ret; + } + + return 0; +} + +static const struct pci_device_id hisi_ptt_id_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, 0xa12e) }, + { } +}; +MODULE_DEVICE_TABLE(pci, hisi_ptt_id_tbl); + +static struct pci_driver hisi_ptt_driver = { + .name = DRV_NAME, + .id_table = hisi_ptt_id_tbl, + .probe = hisi_ptt_probe, +}; + +static int hisi_ptt_cpu_teardown(unsigned int cpu, struct hlist_node *node) +{ + struct hisi_ptt *hisi_ptt; + struct device *dev; + int target, src; + + hisi_ptt = hlist_entry_safe(node, struct hisi_ptt, hotplug_node); + src = hisi_ptt->trace_ctrl.on_cpu; + dev = hisi_ptt->hisi_ptt_pmu.dev; + + if (!hisi_ptt->trace_ctrl.started || src != cpu) + return 0; + + target = cpumask_any_but(cpumask_of_node(dev_to_node(&hisi_ptt->pdev->dev)), cpu); + if (target >= nr_cpu_ids) { + dev_err(dev, "no available cpu for perf context migration\n"); + return 0; + } + + perf_pmu_migrate_context(&hisi_ptt->hisi_ptt_pmu, src, target); + + /* + * Also make sure the interrupt bind to the migrated CPU as well. Warn + * the user on failure here. + */ + if (irq_set_affinity(pci_irq_vector(hisi_ptt->pdev, HISI_PTT_TRACE_DMA_IRQ), + cpumask_of(target))) + dev_warn(dev, "failed to set the affinity of trace interrupt\n"); + + hisi_ptt->trace_ctrl.on_cpu = target; + return 0; +} + +static int __init hisi_ptt_init(void) +{ + int ret; + + ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, DRV_NAME, NULL, + hisi_ptt_cpu_teardown); + if (ret < 0) + return ret; + hisi_ptt_pmu_online = ret; + + ret = pci_register_driver(&hisi_ptt_driver); + if (ret) + cpuhp_remove_multi_state(hisi_ptt_pmu_online); + + return ret; +} +module_init(hisi_ptt_init); + +static void __exit hisi_ptt_exit(void) +{ + pci_unregister_driver(&hisi_ptt_driver); + cpuhp_remove_multi_state(hisi_ptt_pmu_online); +} +module_exit(hisi_ptt_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Yicong Yang <yangyicong@hisilicon.com>"); +MODULE_DESCRIPTION("Driver for HiSilicon PCIe tune and trace device"); diff --git a/drivers/hwtracing/ptt/hisi_ptt.h b/drivers/hwtracing/ptt/hisi_ptt.h new file mode 100644 index 000000000000..10446dce8a86 --- /dev/null +++ b/drivers/hwtracing/ptt/hisi_ptt.h @@ -0,0 +1,177 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Driver for HiSilicon PCIe tune and trace device + * + * Copyright (c) 2022 HiSilicon Technologies Co., Ltd. + * Author: Yicong Yang <yangyicong@hisilicon.com> + */ + +#ifndef _HISI_PTT_H +#define _HISI_PTT_H + +#include <linux/bits.h> +#include <linux/cpumask.h> +#include <linux/list.h> +#include <linux/pci.h> +#include <linux/perf_event.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +#define DRV_NAME "hisi_ptt" + +/* + * The definition of the device registers and register fields. + */ +#define HISI_PTT_TRACE_ADDR_SIZE 0x0800 +#define HISI_PTT_TRACE_ADDR_BASE_LO_0 0x0810 +#define HISI_PTT_TRACE_ADDR_BASE_HI_0 0x0814 +#define HISI_PTT_TRACE_ADDR_STRIDE 0x8 +#define HISI_PTT_TRACE_CTRL 0x0850 +#define HISI_PTT_TRACE_CTRL_EN BIT(0) +#define HISI_PTT_TRACE_CTRL_RST BIT(1) +#define HISI_PTT_TRACE_CTRL_RXTX_SEL GENMASK(3, 2) +#define HISI_PTT_TRACE_CTRL_TYPE_SEL GENMASK(7, 4) +#define HISI_PTT_TRACE_CTRL_DATA_FORMAT BIT(14) +#define HISI_PTT_TRACE_CTRL_FILTER_MODE BIT(15) +#define HISI_PTT_TRACE_CTRL_TARGET_SEL GENMASK(31, 16) +#define HISI_PTT_TRACE_INT_STAT 0x0890 +#define HISI_PTT_TRACE_INT_STAT_MASK GENMASK(3, 0) +#define HISI_PTT_TRACE_INT_MASK 0x0894 +#define HISI_PTT_TRACE_WR_STS 0x08a0 +#define HISI_PTT_TRACE_WR_STS_WRITE GENMASK(27, 0) +#define HISI_PTT_TRACE_WR_STS_BUFFER GENMASK(29, 28) +#define HISI_PTT_TRACE_STS 0x08b0 +#define HISI_PTT_TRACE_IDLE BIT(0) +#define HISI_PTT_DEVICE_RANGE 0x0fe0 +#define HISI_PTT_DEVICE_RANGE_UPPER GENMASK(31, 16) +#define HISI_PTT_DEVICE_RANGE_LOWER GENMASK(15, 0) +#define HISI_PTT_LOCATION 0x0fe8 +#define HISI_PTT_CORE_ID GENMASK(15, 0) +#define HISI_PTT_SICL_ID GENMASK(31, 16) + +/* Parameters of PTT trace DMA part. */ +#define HISI_PTT_TRACE_DMA_IRQ 0 +#define HISI_PTT_TRACE_BUF_CNT 4 +#define HISI_PTT_TRACE_BUF_SIZE SZ_4M +#define HISI_PTT_TRACE_TOTAL_BUF_SIZE (HISI_PTT_TRACE_BUF_SIZE * \ + HISI_PTT_TRACE_BUF_CNT) +/* Wait time for hardware DMA to reset */ +#define HISI_PTT_RESET_TIMEOUT_US 10UL +#define HISI_PTT_RESET_POLL_INTERVAL_US 1UL +/* Poll timeout and interval for waiting hardware work to finish */ +#define HISI_PTT_WAIT_TRACE_TIMEOUT_US 100UL +#define HISI_PTT_WAIT_POLL_INTERVAL_US 10UL + +#define HISI_PCIE_CORE_PORT_ID(devfn) ((PCI_SLOT(devfn) & 0x7) << 1) + +/* Definition of the PMU configs */ +#define HISI_PTT_PMU_FILTER_IS_PORT BIT(19) +#define HISI_PTT_PMU_FILTER_VAL_MASK GENMASK(15, 0) +#define HISI_PTT_PMU_DIRECTION_MASK GENMASK(23, 20) +#define HISI_PTT_PMU_TYPE_MASK GENMASK(31, 24) +#define HISI_PTT_PMU_FORMAT_MASK GENMASK(35, 32) + +/** + * struct hisi_ptt_dma_buffer - Describe a single trace buffer of PTT trace. + * The detail of the data format is described + * in the documentation of PTT device. + * @dma: DMA address of this buffer visible to the device + * @addr: virtual address of this buffer visible to the cpu + */ +struct hisi_ptt_dma_buffer { + dma_addr_t dma; + void *addr; +}; + +/** + * struct hisi_ptt_trace_ctrl - Control and status of PTT trace + * @trace_buf: array of the trace buffers for holding the trace data. + * the length will be HISI_PTT_TRACE_BUF_CNT. + * @handle: perf output handle of current trace session + * @buf_index: the index of current using trace buffer + * @on_cpu: current tracing cpu + * @started: current trace status, true for started + * @is_port: whether we're tracing root port or not + * @direction: direction of the TLP headers to trace + * @filter: filter value for tracing the TLP headers + * @format: format of the TLP headers to trace + * @type: type of the TLP headers to trace + */ +struct hisi_ptt_trace_ctrl { + struct hisi_ptt_dma_buffer *trace_buf; + struct perf_output_handle handle; + u32 buf_index; + int on_cpu; + bool started; + bool is_port; + u32 direction:2; + u32 filter:16; + u32 format:1; + u32 type:4; +}; + +/** + * struct hisi_ptt_filter_desc - Descriptor of the PTT trace filter + * @list: entry of this descriptor in the filter list + * @is_port: the PCI device of the filter is a Root Port or not + * @devid: the PCI device's devid of the filter + */ +struct hisi_ptt_filter_desc { + struct list_head list; + bool is_port; + u16 devid; +}; + +/** + * struct hisi_ptt_pmu_buf - Descriptor of the AUX buffer of PTT trace + * @length: size of the AUX buffer + * @nr_pages: number of pages of the AUX buffer + * @base: start address of AUX buffer + * @pos: position in the AUX buffer to commit traced data + */ +struct hisi_ptt_pmu_buf { + size_t length; + int nr_pages; + void *base; + long pos; +}; + +/** + * struct hisi_ptt - Per PTT device data + * @trace_ctrl: the control information of PTT trace + * @hotplug_node: node for register cpu hotplug event + * @hisi_ptt_pmu: the pum device of trace + * @iobase: base IO address of the device + * @pdev: pci_dev of this PTT device + * @pmu_lock: lock to serialize the perf process + * @upper_bdf: the upper BDF range of the PCI devices managed by this PTT device + * @lower_bdf: the lower BDF range of the PCI devices managed by this PTT device + * @port_filters: the filter list of root ports + * @req_filters: the filter list of requester ID + * @port_mask: port mask of the managed root ports + */ +struct hisi_ptt { + struct hisi_ptt_trace_ctrl trace_ctrl; + struct hlist_node hotplug_node; + struct pmu hisi_ptt_pmu; + void __iomem *iobase; + struct pci_dev *pdev; + spinlock_t pmu_lock; + u32 upper_bdf; + u32 lower_bdf; + + /* + * The trace TLP headers can either be filtered by certain + * root port, or by the requester ID. Organize the filters + * by @port_filters and @req_filters here. The mask of all + * the valid ports is also cached for doing sanity check + * of user input. + */ + struct list_head port_filters; + struct list_head req_filters; + u16 port_mask; +}; + +#define to_hisi_ptt(pmu) container_of(pmu, struct hisi_ptt, hisi_ptt_pmu) + +#endif /* _HISI_PTT_H */ |