diff options
-rw-r--r-- | drivers/leds/leds-lp5521.c | 29 | ||||
-rw-r--r-- | drivers/leds/leds-lp5523.c | 16 | ||||
-rw-r--r-- | drivers/leds/leds-lp55xx-common.c | 15 | ||||
-rw-r--r-- | drivers/leds/leds-lp55xx-common.h | 4 |
4 files changed, 42 insertions, 22 deletions
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c index 0e27f7eb5d09..faab44900c23 100644 --- a/drivers/leds/leds-lp5521.c +++ b/drivers/leds/leds-lp5521.c @@ -238,11 +238,9 @@ static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr) curr); } -static int lp5521_configure(struct i2c_client *client) +static int lp5521_post_init_device(struct lp55xx_chip *chip) { - struct lp5521_chip *chip = i2c_get_clientdata(client); int ret; - u8 cfg; u8 val; /* @@ -251,13 +249,13 @@ static int lp5521_configure(struct i2c_client *client) * otherwise further access to the R G B channels in the * LP5521_REG_ENABLE register will not have any effect - strange! */ - ret = lp5521_read(client, LP5521_REG_R_CURRENT, &val); + ret = lp55xx_read(chip, LP5521_REG_R_CURRENT, &val); if (ret) { - dev_err(&client->dev, "error in resetting chip\n"); + dev_err(&chip->cl->dev, "error in resetting chip\n"); return ret; } if (val != LP5521_REG_R_CURR_DEFAULT) { - dev_err(&client->dev, + dev_err(&chip->cl->dev, "unexpected data in register (expected 0x%x got 0x%x)\n", LP5521_REG_R_CURR_DEFAULT, val); ret = -EINVAL; @@ -266,22 +264,21 @@ static int lp5521_configure(struct i2c_client *client) usleep_range(10000, 20000); /* Set all PWMs to direct control mode */ - ret = lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); + ret = lp55xx_write(chip, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); - cfg = chip->pdata->update_config ? + val = chip->pdata->update_config ? : (LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT); - ret = lp5521_write(client, LP5521_REG_CONFIG, cfg); + ret = lp55xx_write(chip, LP5521_REG_CONFIG, val); if (ret) return ret; /* Initialize all channels PWM to zero -> leds off */ - lp5521_write(client, LP5521_REG_R_PWM, 0); - lp5521_write(client, LP5521_REG_G_PWM, 0); - lp5521_write(client, LP5521_REG_B_PWM, 0); + lp55xx_write(chip, LP5521_REG_R_PWM, 0); + lp55xx_write(chip, LP5521_REG_G_PWM, 0); + lp55xx_write(chip, LP5521_REG_B_PWM, 0); /* Set engines are set to run state when OP_MODE enables engines */ - ret = lp5521_write(client, LP5521_REG_ENABLE, - LP5521_ENABLE_RUN_PROGRAM); + ret = lp55xx_write(chip, LP5521_REG_ENABLE, LP5521_ENABLE_RUN_PROGRAM); if (ret) return ret; @@ -696,9 +693,10 @@ static void lp5521_deinit_device(struct lp5521_chip *chip); static int lp5521_init_device(struct lp5521_chip *chip) { struct i2c_client *client = chip->client; + struct lp55xx_chip *temp; int ret; - ret = lp5521_configure(client); + ret = lp5521_post_init_device(temp); if (ret < 0) { dev_err(&client->dev, "error configuring chip\n"); goto err_config; @@ -828,6 +826,7 @@ static struct lp55xx_device_config lp5521_cfg = { .addr = LP5521_REG_ENABLE, .val = LP5521_ENABLE_DEFAULT, }, + .post_init_device = lp5521_post_init_device, }; static int lp5521_probe(struct i2c_client *client, diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c index b3698e85d51f..110565b066e2 100644 --- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -181,18 +181,18 @@ static int lp5523_read(struct i2c_client *client, u8 reg, u8 *buf) return 0; } -static int lp5523_configure(struct i2c_client *client) +static int lp5523_post_init_device(struct lp55xx_chip *chip) { - int ret = 0; + int ret; - ret = lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE); + ret = lp55xx_write(chip, LP5523_REG_ENABLE, LP5523_ENABLE); if (ret) return ret; /* Chip startup time is 500 us, 1 - 2 ms gives some margin */ usleep_range(1000, 2000); - ret = lp5523_write(client, LP5523_REG_CONFIG, + ret = lp55xx_write(chip, LP5523_REG_CONFIG, LP5523_AUTO_INC | LP5523_PWR_SAVE | LP5523_CP_AUTO | LP5523_AUTO_CLK | LP5523_PWM_PWR_SAVE); @@ -200,11 +200,11 @@ static int lp5523_configure(struct i2c_client *client) return ret; /* turn on all leds */ - ret = lp5523_write(client, LP5523_REG_ENABLE_LEDS_MSB, 0x01); + ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_MSB, 0x01); if (ret) return ret; - return lp5523_write(client, LP5523_REG_ENABLE_LEDS_LSB, 0xff); + return lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_LSB, 0xff); } static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode) @@ -888,9 +888,10 @@ static void lp5523_deinit_device(struct lp5523_chip *chip); static int lp5523_init_device(struct lp5523_chip *chip) { struct i2c_client *client = chip->client; + struct lp55xx_chip *temp; int ret; - ret = lp5523_configure(client); + ret = lp5523_post_init_device(temp); if (ret < 0) { dev_err(&client->dev, "error configuring chip\n"); goto err_config; @@ -923,6 +924,7 @@ static struct lp55xx_device_config lp5523_cfg = { .addr = LP5523_REG_ENABLE, .val = LP5523_ENABLE, }, + .post_init_device = lp5523_post_init_device, }; static int lp5523_probe(struct i2c_client *client, diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c index 6fede0b96715..74beb363b787 100644 --- a/drivers/leds/leds-lp55xx-common.c +++ b/drivers/leds/leds-lp55xx-common.c @@ -53,6 +53,16 @@ static int lp55xx_detect_device(struct lp55xx_chip *chip) return 0; } +static int lp55xx_post_init_device(struct lp55xx_chip *chip) +{ + struct lp55xx_device_config *cfg = chip->cfg; + + if (!cfg->post_init_device) + return 0; + + return cfg->post_init_device(chip); +} + int lp55xx_write(struct lp55xx_chip *chip, u8 reg, u8 val) { return i2c_smbus_write_byte_data(chip->cl, reg, val); @@ -132,6 +142,11 @@ int lp55xx_init_device(struct lp55xx_chip *chip) goto err; } + /* chip specific initialization */ + ret = lp55xx_post_init_device(chip); + + return 0; + err: return ret; } diff --git a/drivers/leds/leds-lp55xx-common.h b/drivers/leds/leds-lp55xx-common.h index 81753012ba27..ffedc7723d84 100644 --- a/drivers/leds/leds-lp55xx-common.h +++ b/drivers/leds/leds-lp55xx-common.h @@ -32,10 +32,14 @@ struct lp55xx_reg { * struct lp55xx_device_config * @reset : Chip specific reset command * @enable : Chip specific enable command + * @post_init_device : Chip specific initialization code */ struct lp55xx_device_config { const struct lp55xx_reg reset; const struct lp55xx_reg enable; + + /* define if the device has specific initialization process */ + int (*post_init_device) (struct lp55xx_chip *chip); }; /* |