diff options
Diffstat (limited to 'Documentation/devicetree/bindings/leds/tca6507.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/leds/tca6507.txt | 49 |
1 files changed, 0 insertions, 49 deletions
diff --git a/Documentation/devicetree/bindings/leds/tca6507.txt b/Documentation/devicetree/bindings/leds/tca6507.txt deleted file mode 100644 index bad9102796f3..000000000000 --- a/Documentation/devicetree/bindings/leds/tca6507.txt +++ /dev/null @@ -1,49 +0,0 @@ -LEDs connected to tca6507 - -Required properties: -- compatible : should be : "ti,tca6507". -- #address-cells: must be 1 -- #size-cells: must be 0 -- reg: typically 0x45. - -Optional properties: -- gpio-controller: allows lines to be used as output-only GPIOs. -- #gpio-cells: if present, must not be 0. - -Each led is represented as a sub-node of the ti,tca6507 device. - -LED sub-node properties: -- label : (optional) see Documentation/devicetree/bindings/leds/common.txt -- reg : number of LED line (could be from 0 to 6) -- linux,default-trigger : (optional) - see Documentation/devicetree/bindings/leds/common.txt -- compatible: either "led" (the default) or "gpio". - -Examples: - -tca6507@45 { - compatible = "ti,tca6507"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x45>; - - gpio-controller; - #gpio-cells = <2>; - - led0: red-aux@0 { - label = "red:aux"; - reg = <0x0>; - }; - - led1: green-aux@1 { - label = "green:aux"; - reg = <0x5>; - linux,default-trigger = "default-on"; - }; - - wifi-reset@6 { - reg = <0x6>; - compatible = "gpio"; - }; -}; - |