diff options
Diffstat (limited to 'Documentation/devicetree/bindings/media')
| -rw-r--r-- | Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml | 107 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/media/amlogic,vdec.txt | 72 |
2 files changed, 107 insertions, 72 deletions
diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml new file mode 100644 index 000000000000..878944867d6e --- /dev/null +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/amlogic,gx-vdec.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Video Decoder + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + - Maxime Jourdan <mjourdan@baylibre.com> + +description: | + The video decoding IP lies within the DOS memory region, + except for the hardware bitstream parser that makes use of an undocumented + region. + + It makes use of the following blocks: + - ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks + then feed from this VIFIFO. + - VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1. + - VDEC_HEVC can decode HEVC and VP9. + + Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run + concurrently. + +properties: + compatible: + items: + - enum: + - amlogic,gxbb-vdec # GXBB (S905) + - amlogic,gxl-vdec # GXL (S905X, S905D) + - amlogic,gxm-vdec # GXM (S912) + - const: amlogic,gx-vdec + + interrupts: + minItems: 2 + + interrupt-names: + items: + - const: vdec + - const: esparser + + reg: + minItems: 2 + + reg-names: + items: + - const: dos + - const: esparser + + resets: + maxItems: 1 + + reset-names: + items: + - const: esparser + + clocks: + minItems: 4 + + clock-names: + items: + - const: dos_parser + - const: dos + - const: vdec_1 + - const: vdec_hevc + + amlogic,ao-sysctrl: + description: should point to the AOBUS sysctrl node + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + + amlogic,canvas: + description: should point to a canvas provider node + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - amlogic,ao-sysctrl + - amlogic,canvas + +examples: + - | + vdec: video-decoder@c8820000 { + compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec"; + reg = <0xc8820000 0x10000>, <0xc110a580 0xe4>; + reg-names = "dos", "esparser"; + interrupts = <44>, <32>; + interrupt-names = "vdec", "esparser"; + clocks = <&clk_dos_parser> ,<&clk_dos>, <&clk_vdec_1>, <&clk_vdec_hevc>; + clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; + resets = <&reset_parser>; + reset-names = "esparser"; + amlogic,ao-sysctrl = <&sysctrl_AO>; + amlogic,canvas = <&canvas>; + }; diff --git a/Documentation/devicetree/bindings/media/amlogic,vdec.txt b/Documentation/devicetree/bindings/media/amlogic,vdec.txt deleted file mode 100644 index 9b6aace86ca7..000000000000 --- a/Documentation/devicetree/bindings/media/amlogic,vdec.txt +++ /dev/null @@ -1,72 +0,0 @@ -Amlogic Video Decoder -================================ - -The video decoding IP lies within the DOS memory region, -except for the hardware bitstream parser that makes use of an undocumented -region. - -It makes use of the following blocks: - -- ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks -then feed from this VIFIFO. -- VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1. -- VDEC_HEVC can decode HEVC and VP9. - -Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run -concurrently. - -Device Tree Bindings: ---------------------- - -VDEC: Video Decoder --------------------------- - -Required properties: -- compatible: value should be different for each SoC family as : - - GXBB (S905) : "amlogic,gxbb-vdec" - - GXL (S905X, S905D) : "amlogic,gxl-vdec" - - GXM (S912) : "amlogic,gxm-vdec" - followed by the common "amlogic,gx-vdec" -- reg: base address and size of he following memory-mapped regions : - - dos - - esparser -- reg-names: should contain the names of the previous memory regions -- interrupts: should contain the following IRQs: - - vdec - - esparser -- interrupt-names: should contain the names of the previous interrupts -- amlogic,ao-sysctrl: should point to the AOBUS sysctrl node -- amlogic,canvas: should point to a canvas provider node -- clocks: should contain the following clocks : - - dos_parser - - dos - - vdec_1 - - vdec_hevc -- clock-names: should contain the names of the previous clocks -- resets: should contain the parser reset -- reset-names: should be "esparser" - -Example: - -vdec: video-codec@c8820000 { - compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec"; - reg = <0x0 0xc8820000 0x0 0x10000>, - <0x0 0xc110a580 0x0 0xe4>; - reg-names = "dos", "esparser"; - - interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "vdec", "esparser"; - - amlogic,ao-sysctrl = <&sysctrl_AO>; - amlogic,canvas = <&canvas>; - - clocks = <&clkc CLKID_DOS_PARSER>, - <&clkc CLKID_DOS>, - <&clkc CLKID_VDEC_1>, - <&clkc CLKID_VDEC_HEVC>; - clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; - - resets = <&reset RESET_PARSER>; - reset-names = "esparser"; -}; |