aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/power
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/power')
-rw-r--r--Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt2
-rw-r--r--Documentation/devicetree/bindings/power/fsl,imx-gpc.txt2
-rw-r--r--Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt2
-rw-r--r--Documentation/devicetree/bindings/power/pd-samsung.txt45
-rw-r--r--Documentation/devicetree/bindings/power/pd-samsung.yaml66
-rw-r--r--Documentation/devicetree/bindings/power/power-domain.yaml133
-rw-r--r--Documentation/devicetree/bindings/power/power_domain.txt95
-rw-r--r--Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt2
-rw-r--r--Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt30
-rw-r--r--Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml60
-rw-r--r--Documentation/devicetree/bindings/power/reset/syscon-reboot.txt30
-rw-r--r--Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml60
-rw-r--r--Documentation/devicetree/bindings/power/supply/max77650-charger.txt28
-rw-r--r--Documentation/devicetree/bindings/power/supply/max77650-charger.yaml34
-rw-r--r--Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt2
15 files changed, 359 insertions, 232 deletions
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
index 0fdc3dd1125e..99b5b10cda31 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
@@ -10,7 +10,7 @@ The Video Processing Unit power domain is controlled by this power controller,
but the domain requires some external resources to meet the correct power
sequences.
The bindings must respect the power domain bindings as described in the file
-power_domain.txt
+power-domain.yaml
Device Tree Bindings:
---------------------
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
index 726ec2875223..f0f5553a9e74 100644
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
@@ -19,7 +19,7 @@ Required properties:
- ipg
The power domains are generic power domain providers as documented in
-Documentation/devicetree/bindings/power/power_domain.txt. They are described as
+Documentation/devicetree/bindings/power/power-domain.yaml. They are described as
subnodes of the power gating controller 'pgc' node of the GPC and should
contain the following:
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
index 7c7e972aaa42..61649202f6f5 100644
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
@@ -17,7 +17,7 @@ Required properties:
Power domains contained within GPC node are generic power domain
providers, documented in
-Documentation/devicetree/bindings/power/power_domain.txt, which are
+Documentation/devicetree/bindings/power/power-domain.yaml, which are
described as subnodes of the power gating controller 'pgc' node,
which, in turn, is expected to contain the following:
diff --git a/Documentation/devicetree/bindings/power/pd-samsung.txt b/Documentation/devicetree/bindings/power/pd-samsung.txt
deleted file mode 100644
index 92ef355e8f64..000000000000
--- a/Documentation/devicetree/bindings/power/pd-samsung.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-* Samsung Exynos Power Domains
-
-Exynos processors include support for multiple power domains which are used
-to gate power to one or more peripherals on the processor.
-
-Required Properties:
-- compatible: should be one of the following.
- * samsung,exynos4210-pd - for exynos4210 type power domain.
- * samsung,exynos5433-pd - for exynos5433 type power domain.
-- reg: physical base address of the controller and length of memory mapped
- region.
-- #power-domain-cells: number of cells in power domain specifier;
- must be 0.
-
-Optional Properties:
-- label: Human readable string with domain name. Will be visible in userspace
- to let user to distinguish between multiple domains in SoC.
-- power-domains: phandle pointing to the parent power domain, for more details
- see Documentation/devicetree/bindings/power/power_domain.txt
-
-Deprecated Properties:
-- clocks
-- clock-names
-
-Node of a device using power domains must have a power-domains property
-defined with a phandle to respective power domain.
-
-Example:
-
- lcd0: power-domain-lcd0 {
- compatible = "samsung,exynos4210-pd";
- reg = <0x10023C00 0x10>;
- #power-domain-cells = <0>;
- label = "LCD0";
- };
-
- mfc_pd: power-domain@10044060 {
- compatible = "samsung,exynos4210-pd";
- reg = <0x10044060 0x20>;
- #power-domain-cells = <0>;
- label = "MFC";
- };
-
-See Documentation/devicetree/bindings/power/power_domain.txt for description
-of consumer-side bindings.
diff --git a/Documentation/devicetree/bindings/power/pd-samsung.yaml b/Documentation/devicetree/bindings/power/pd-samsung.yaml
new file mode 100644
index 000000000000..09bdd96c1ec1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/pd-samsung.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/pd-samsung.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Power Domains
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |+
+ Exynos processors include support for multiple power domains which are used
+ to gate power to one or more peripherals on the processor.
+
+allOf:
+ - $ref: power-domain.yaml#
+
+properties:
+ compatible:
+ enum:
+ - samsung,exynos4210-pd
+ - samsung,exynos5433-pd
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ deprecated: true
+ maxItems: 1
+
+ clock-names:
+ deprecated: true
+ maxItems: 1
+
+ label:
+ description:
+ Human readable string with domain name. Will be visible in userspace
+ to let user to distinguish between multiple domains in SoC.
+
+ "#power-domain-cells":
+ const: 0
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - "#power-domain-cells"
+ - reg
+
+examples:
+ - |
+ lcd0_pd: power-domain@10023c80 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023c80 0x20>;
+ #power-domain-cells = <0>;
+ label = "LCD0";
+ };
+
+ mfc_pd: power-domain@10044060 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044060 0x20>;
+ #power-domain-cells = <0>;
+ label = "MFC";
+ };
diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml
new file mode 100644
index 000000000000..455b573293ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/power-domain.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/power-domain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic PM domains
+
+maintainers:
+ - Rafael J. Wysocki <rjw@rjwysocki.net>
+ - Kevin Hilman <khilman@kernel.org>
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+description: |+
+ System on chip designs are often divided into multiple PM domains that can be
+ used for power gating of selected IP blocks for power saving by reduced leakage
+ current.
+
+ This device tree binding can be used to bind PM domain consumer devices with
+ their PM domains provided by PM domain providers. A PM domain provider can be
+ represented by any node in the device tree and can provide one or more PM
+ domains. A consumer node can refer to the provider by a phandle and a set of
+ phandle arguments (so called PM domain specifiers) of length specified by the
+ \#power-domain-cells property in the PM domain provider node.
+
+properties:
+ $nodename:
+ pattern: "^(power-controller|power-domain)(@.*)?$"
+
+ domain-idle-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ A phandle of an idle-state that shall be soaked into a generic domain
+ power state. The idle state definitions are compatible with
+ domain-idle-state specified in
+ Documentation/devicetree/bindings/power/domain-idle-state.txt
+ phandles that are not compatible with domain-idle-state will be ignored.
+ The domain-idle-state property reflects the idle state of this PM domain
+ and not the idle states of the devices or sub-domains in the PM domain.
+ Devices and sub-domains have their own idle-states independent
+ of the parent domain's idle states. In the absence of this property,
+ the domain would be considered as capable of being powered-on
+ or powered-off.
+
+ operating-points-v2:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Phandles to the OPP tables of power domains provided by a power domain
+ provider. If the provider provides a single power domain only or all
+ the power domains provided by the provider have identical OPP tables,
+ then this shall contain a single phandle. Refer to ../opp/opp.txt
+ for more information.
+
+ "#power-domain-cells":
+ description:
+ Number of cells in a PM domain specifier. Typically 0 for nodes
+ representing a single PM domain and 1 for nodes providing multiple PM
+ domains (e.g. power controllers), but can be any value as specified
+ by device tree binding documentation of particular provider.
+
+ power-domains:
+ description:
+ A phandle and PM domain specifier as defined by bindings of the power
+ controller specified by phandle. Some power domains might be powered
+ from another power domain (or have other hardware specific
+ dependencies). For representing such dependency a standard PM domain
+ consumer binding is used. When provided, all domains created
+ by the given provider should be subdomains of the domain specified
+ by this binding.
+
+required:
+ - "#power-domain-cells"
+
+examples:
+ - |
+ power: power-controller@12340000 {
+ compatible = "foo,power-controller";
+ reg = <0x12340000 0x1000>;
+ #power-domain-cells = <1>;
+ };
+
+ // The node above defines a power controller that is a PM domain provider and
+ // expects one cell as its phandle argument.
+
+ - |
+ parent2: power-controller@12340000 {
+ compatible = "foo,power-controller";
+ reg = <0x12340000 0x1000>;
+ #power-domain-cells = <1>;
+ };
+
+ child2: power-controller@12341000 {
+ compatible = "foo,power-controller";
+ reg = <0x12341000 0x1000>;
+ power-domains = <&parent2 0>;
+ #power-domain-cells = <1>;
+ };
+
+ // The nodes above define two power controllers: 'parent' and 'child'.
+ // Domains created by the 'child' power controller are subdomains of '0' power
+ // domain provided by the 'parent' power controller.
+
+ - |
+ parent3: power-controller@12340000 {
+ compatible = "foo,power-controller";
+ reg = <0x12340000 0x1000>;
+ #power-domain-cells = <0>;
+ domain-idle-states = <&DOMAIN_RET>, <&DOMAIN_PWR_DN>;
+ };
+
+ child3: power-controller@12341000 {
+ compatible = "foo,power-controller";
+ reg = <0x12341000 0x1000>;
+ power-domains = <&parent3>;
+ #power-domain-cells = <0>;
+ domain-idle-states = <&DOMAIN_PWR_DN>;
+ };
+
+ DOMAIN_RET: state@0 {
+ compatible = "domain-idle-state";
+ reg = <0x0 0x0>;
+ entry-latency-us = <1000>;
+ exit-latency-us = <2000>;
+ min-residency-us = <10000>;
+ };
+
+ DOMAIN_PWR_DN: state@1 {
+ compatible = "domain-idle-state";
+ reg = <0x1 0x0>;
+ entry-latency-us = <5000>;
+ exit-latency-us = <8000>;
+ min-residency-us = <7000>;
+ };
diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt
index 8f8b25a24b8f..5b09b2deb483 100644
--- a/Documentation/devicetree/bindings/power/power_domain.txt
+++ b/Documentation/devicetree/bindings/power/power_domain.txt
@@ -13,100 +13,7 @@ phandle arguments (so called PM domain specifiers) of length specified by the
==PM domain providers==
-Required properties:
- - #power-domain-cells : Number of cells in a PM domain specifier;
- Typically 0 for nodes representing a single PM domain and 1 for nodes
- providing multiple PM domains (e.g. power controllers), but can be any value
- as specified by device tree binding documentation of particular provider.
-
-Optional properties:
- - power-domains : A phandle and PM domain specifier as defined by bindings of
- the power controller specified by phandle.
- Some power domains might be powered from another power domain (or have
- other hardware specific dependencies). For representing such dependency
- a standard PM domain consumer binding is used. When provided, all domains
- created by the given provider should be subdomains of the domain
- specified by this binding. More details about power domain specifier are
- available in the next section.
-
-- domain-idle-states : A phandle of an idle-state that shall be soaked into a
- generic domain power state. The idle state definitions are
- compatible with domain-idle-state specified in [1]. phandles
- that are not compatible with domain-idle-state will be
- ignored.
- The domain-idle-state property reflects the idle state of this PM domain and
- not the idle states of the devices or sub-domains in the PM domain. Devices
- and sub-domains have their own idle-states independent of the parent
- domain's idle states. In the absence of this property, the domain would be
- considered as capable of being powered-on or powered-off.
-
-- operating-points-v2 : Phandles to the OPP tables of power domains provided by
- a power domain provider. If the provider provides a single power domain only
- or all the power domains provided by the provider have identical OPP tables,
- then this shall contain a single phandle. Refer to ../opp/opp.txt for more
- information.
-
-Example:
-
- power: power-controller@12340000 {
- compatible = "foo,power-controller";
- reg = <0x12340000 0x1000>;
- #power-domain-cells = <1>;
- };
-
-The node above defines a power controller that is a PM domain provider and
-expects one cell as its phandle argument.
-
-Example 2:
-
- parent: power-controller@12340000 {
- compatible = "foo,power-controller";
- reg = <0x12340000 0x1000>;
- #power-domain-cells = <1>;
- };
-
- child: power-controller@12341000 {
- compatible = "foo,power-controller";
- reg = <0x12341000 0x1000>;
- power-domains = <&parent 0>;
- #power-domain-cells = <1>;
- };
-
-The nodes above define two power controllers: 'parent' and 'child'.
-Domains created by the 'child' power controller are subdomains of '0' power
-domain provided by the 'parent' power controller.
-
-Example 3:
- parent: power-controller@12340000 {
- compatible = "foo,power-controller";
- reg = <0x12340000 0x1000>;
- #power-domain-cells = <0>;
- domain-idle-states = <&DOMAIN_RET>, <&DOMAIN_PWR_DN>;
- };
-
- child: power-controller@12341000 {
- compatible = "foo,power-controller";
- reg = <0x12341000 0x1000>;
- power-domains = <&parent>;
- #power-domain-cells = <0>;
- domain-idle-states = <&DOMAIN_PWR_DN>;
- };
-
- DOMAIN_RET: state@0 {
- compatible = "domain-idle-state";
- reg = <0x0>;
- entry-latency-us = <1000>;
- exit-latency-us = <2000>;
- min-residency-us = <10000>;
- };
-
- DOMAIN_PWR_DN: state@1 {
- compatible = "domain-idle-state";
- reg = <0x1>;
- entry-latency-us = <5000>;
- exit-latency-us = <8000>;
- min-residency-us = <7000>;
- };
+See power-domain.yaml.
==PM domain consumers==
diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt
index beda7d2efc30..49aba15dff8b 100644
--- a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt
+++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt
@@ -29,7 +29,7 @@ Optional nodes:
Each of the PM domain nodes represents a PM domain, as documented by the
generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
+Documentation/devicetree/bindings/power/power-domain.yaml.
The nodes should be named by the real power area names, and thus their names
should be unique.
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt
deleted file mode 100644
index 022ed1f3bc80..000000000000
--- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Generic SYSCON mapped register poweroff driver
-
-This is a generic poweroff driver using syscon to map the poweroff register.
-The poweroff is generally performed with a write to the poweroff register
-defined by the register map pointed by syscon reference plus the offset
-with the value and mask defined in the poweroff node.
-
-Required properties:
-- compatible: should contain "syscon-poweroff"
-- regmap: this is phandle to the register map node
-- offset: offset in the register map for the poweroff register (in bytes)
-- value: the poweroff value written to the poweroff register (32 bit access)
-
-Optional properties:
-- mask: update only the register bits defined by the mask (32 bit)
-
-Legacy usage:
-If a node doesn't contain a value property but contains a mask property, the
-mask property is used as the value.
-
-Default will be little endian mode, 32 bit access only.
-
-Examples:
-
- poweroff {
- compatible = "syscon-poweroff";
- regmap = <&regmapnode>;
- offset = <0x0>;
- mask = <0x7a>;
- };
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
new file mode 100644
index 000000000000..520e07e6f21b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/syscon-poweroff.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic SYSCON mapped register poweroff driver
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |+
+ This is a generic poweroff driver using syscon to map the poweroff register.
+ The poweroff is generally performed with a write to the poweroff register
+ defined by the register map pointed by syscon reference plus the offset
+ with the value and mask defined in the poweroff node.
+ Default will be little endian mode, 32 bit access only.
+
+properties:
+ compatible:
+ const: syscon-poweroff
+
+ mask:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Update only the register bits defined by the mask (32 bit).
+
+ offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Offset in the register map for the poweroff register (in bytes).
+
+ regmap:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Phandle to the register map node.
+
+ value:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The poweroff value written to the poweroff register (32 bit access).
+
+required:
+ - compatible
+ - regmap
+ - offset
+
+allOf:
+ - if:
+ not:
+ required:
+ - mask
+ then:
+ required:
+ - value
+
+examples:
+ - |
+ poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&regmapnode>;
+ offset = <0x0>;
+ mask = <0x7a>;
+ };
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.txt b/Documentation/devicetree/bindings/power/reset/syscon-reboot.txt
deleted file mode 100644
index e23dea8344f8..000000000000
--- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Generic SYSCON mapped register reset driver
-
-This is a generic reset driver using syscon to map the reset register.
-The reset is generally performed with a write to the reset register
-defined by the register map pointed by syscon reference plus the offset
-with the value and mask defined in the reboot node.
-
-Required properties:
-- compatible: should contain "syscon-reboot"
-- regmap: this is phandle to the register map node
-- offset: offset in the register map for the reboot register (in bytes)
-- value: the reset value written to the reboot register (32 bit access)
-
-Optional properties:
-- mask: update only the register bits defined by the mask (32 bit)
-
-Legacy usage:
-If a node doesn't contain a value property but contains a mask property, the
-mask property is used as the value.
-
-Default will be little endian mode, 32 bit access only.
-
-Examples:
-
- reboot {
- compatible = "syscon-reboot";
- regmap = <&regmapnode>;
- offset = <0x0>;
- mask = <0x1>;
- };
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
new file mode 100644
index 000000000000..d38006b1f1f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/syscon-reboot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic SYSCON mapped register reset driver
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |+
+ This is a generic reset driver using syscon to map the reset register.
+ The reset is generally performed with a write to the reset register
+ defined by the register map pointed by syscon reference plus the offset
+ with the value and mask defined in the reboot node.
+ Default will be little endian mode, 32 bit access only.
+
+properties:
+ compatible:
+ const: syscon-reboot
+
+ mask:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Update only the register bits defined by the mask (32 bit).
+
+ offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Offset in the register map for the reboot register (in bytes).
+
+ regmap:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Phandle to the register map node.
+
+ value:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The reset value written to the reboot register (32 bit access).
+
+required:
+ - compatible
+ - regmap
+ - offset
+
+allOf:
+ - if:
+ not:
+ required:
+ - mask
+ then:
+ required:
+ - value
+
+examples:
+ - |
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&regmapnode>;
+ offset = <0x0>;
+ mask = <0x1>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.txt b/Documentation/devicetree/bindings/power/supply/max77650-charger.txt
deleted file mode 100644
index e6d0fb6ff94e..000000000000
--- a/Documentation/devicetree/bindings/power/supply/max77650-charger.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Battery charger driver for MAX77650 PMIC from Maxim Integrated.
-
-This module is part of the MAX77650 MFD device. For more details
-see Documentation/devicetree/bindings/mfd/max77650.txt.
-
-The charger is represented as a sub-node of the PMIC node on the device tree.
-
-Required properties:
---------------------
-- compatible: Must be "maxim,max77650-charger"
-
-Optional properties:
---------------------
-- input-voltage-min-microvolt: Minimum CHGIN regulation voltage. Must be one
- of: 4000000, 4100000, 4200000, 4300000,
- 4400000, 4500000, 4600000, 4700000.
-- input-current-limit-microamp: CHGIN input current limit (in microamps). Must
- be one of: 95000, 190000, 285000, 380000,
- 475000.
-
-Example:
---------
-
- charger {
- compatible = "maxim,max77650-charger";
- input-voltage-min-microvolt = <4200000>;
- input-current-limit-microamp = <285000>;
- };
diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
new file mode 100644
index 000000000000..deef010ec535
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/max77650-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery charger driver for MAX77650 PMIC from Maxim Integrated.
+
+maintainers:
+ - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description: |
+ This module is part of the MAX77650 MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/max77650.yaml.
+
+ The charger is represented as a sub-node of the PMIC node on the device tree.
+
+properties:
+ compatible:
+ const: maxim,max77650-charger
+
+ input-voltage-min-microvolt:
+ description:
+ Minimum CHGIN regulation voltage.
+ enum: [ 4000000, 4100000, 4200000, 4300000,
+ 4400000, 4500000, 4600000, 4700000 ]
+
+ input-current-limit-microamp:
+ description:
+ CHGIN input current limit (in microamps).
+ enum: [ 95000, 190000, 285000, 380000, 475000 ]
+
+required:
+ - compatible
diff --git a/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt b/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt
index 8d1b8200ebd0..54b9f9d0f90f 100644
--- a/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt
+++ b/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt
@@ -4,7 +4,7 @@ Device Tree Bindings for the Xilinx Zynq MPSoC PM domains
The binding for zynqmp-power-controller follow the common
generic PM domain binding[1].
-[1] Documentation/devicetree/bindings/power/power_domain.txt
+[1] Documentation/devicetree/bindings/power/power-domain.yaml
== Zynq MPSoC Generic PM Domain Node ==