diff options
Diffstat (limited to 'Documentation/devicetree')
539 files changed, 18253 insertions, 7277 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic,scpi.txt b/Documentation/devicetree/bindings/arm/amlogic,scpi.txt deleted file mode 100644 index 5ab59da052df..000000000000 --- a/Documentation/devicetree/bindings/arm/amlogic,scpi.txt +++ /dev/null @@ -1,27 +0,0 @@ -System Control and Power Interface (SCPI) Message Protocol -(in addition to the standard binding in [0]) ----------------------------------------------------------- -Required properties - -- compatible : should be "amlogic,meson-gxbb-scpi" - -AMLOGIC SRAM and Shared Memory for SCPI ------------------------------------- - -Required properties: -- compatible : should be "amlogic,meson-gxbb-sram" - -Each sub-node represents the reserved area for SCPI. - -Required sub-node properties: -- compatible : should be "amlogic,meson-gxbb-scp-shmem" for SRAM based shared - memory on Amlogic GXBB SoC. - -Sensor bindings for the sensors based on SCPI Message Protocol --------------------------------------------------------------- -SCPI provides an API to access the various sensors on the SoC. - -Required properties: -- compatible : should be "amlogic,meson-gxbb-scpi-sensors". - -[0] Documentation/devicetree/bindings/arm/arm,scpi.txt diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt deleted file mode 100644 index 667d58e0a659..000000000000 --- a/Documentation/devicetree/bindings/arm/arm,scmi.txt +++ /dev/null @@ -1,239 +0,0 @@ -System Control and Management Interface (SCMI) Message Protocol ----------------------------------------------------------- - -The SCMI is intended to allow agents such as OSPM to manage various functions -that are provided by the hardware platform it is running on, including power -and performance functions. - -This binding is intended to define the interface the firmware implementing -the SCMI as described in ARM document number ARM DEN 0056A ("ARM System Control -and Management Interface Platform Design Document")[0] provide for OSPM in -the device tree. - -Required properties: - -The scmi node with the following properties shall be under the /firmware/ node. - -- compatible : shall be "arm,scmi" or "arm,scmi-smc" for smc/hvc transports -- mboxes: List of phandle and mailbox channel specifiers. It should contain - exactly one or two mailboxes, one for transmitting messages("tx") - and another optional for receiving the notifications("rx") if - supported. -- shmem : List of phandle pointing to the shared memory(SHM) area as per - generic mailbox client binding. -- #address-cells : should be '1' if the device has sub-nodes, maps to - protocol identifier for a given sub-node. -- #size-cells : should be '0' as 'reg' property doesn't have any size - associated with it. -- arm,smc-id : SMC id required when using smc or hvc transports - -Optional properties: - -- mbox-names: shall be "tx" or "rx" depending on mboxes entries. - -- interrupts : when using smc or hvc transports, this optional - property indicates that msg completion by the platform is indicated - by an interrupt rather than by the return of the smc call. This - should not be used except when the platform requires such behavior. - -- interrupt-names : if "interrupts" is present, interrupt-names must also - be present and have the value "a2p". - -See Documentation/devicetree/bindings/mailbox/mailbox.txt for more details -about the generic mailbox controller and client driver bindings. - -The mailbox is the only permitted method of calling the SCMI firmware. -Mailbox doorbell is used as a mechanism to alert the presence of a -messages and/or notification. - -Each protocol supported shall have a sub-node with corresponding compatible -as described in the following sections. If the platform supports dedicated -communication channel for a particular protocol, the 3 properties namely: -mboxes, mbox-names and shmem shall be present in the sub-node corresponding -to that protocol. - -Clock/Performance bindings for the clocks/OPPs based on SCMI Message Protocol ------------------------------------------------------------- - -This binding uses the common clock binding[1]. - -Required properties: -- #clock-cells : Should be 1. Contains the Clock ID value used by SCMI commands. - -Power domain bindings for the power domains based on SCMI Message Protocol ------------------------------------------------------------- - -This binding for the SCMI power domain providers uses the generic power -domain binding[2]. - -Required properties: - - #power-domain-cells : Should be 1. Contains the device or the power - domain ID value used by SCMI commands. - -Regulator bindings for the SCMI Regulator based on SCMI Message Protocol ------------------------------------------------------------- -An SCMI Regulator is permanently bound to a well defined SCMI Voltage Domain, -and should be always positioned as a root regulator. -It does not support any current operation. - -SCMI Regulators are grouped under a 'regulators' node which in turn is a child -of the SCMI Voltage protocol node inside the desired SCMI instance node. - -This binding uses the common regulator binding[6]. - -Required properties: - - reg : shall identify an existent SCMI Voltage Domain. - -Sensor bindings for the sensors based on SCMI Message Protocol --------------------------------------------------------------- -SCMI provides an API to access the various sensors on the SoC. - -Required properties: -- #thermal-sensor-cells: should be set to 1. This property follows the - thermal device tree bindings[3]. - - Valid cell values are raw identifiers (Sensor ID) - as used by the firmware. Refer to platform details - for your implementation for the IDs to use. - -Reset signal bindings for the reset domains based on SCMI Message Protocol ------------------------------------------------------------- - -This binding for the SCMI reset domain providers uses the generic reset -signal binding[5]. - -Required properties: - - #reset-cells : Should be 1. Contains the reset domain ID value used - by SCMI commands. - -SRAM and Shared Memory for SCMI -------------------------------- - -A small area of SRAM is reserved for SCMI communication between application -processors and SCP. - -The properties should follow the generic mmio-sram description found in [4] - -Each sub-node represents the reserved area for SCMI. - -Required sub-node properties: -- reg : The base offset and size of the reserved area with the SRAM -- compatible : should be "arm,scmi-shmem" for Non-secure SRAM based - shared memory - -[0] http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/index.html -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/power/power-domain.yaml -[3] Documentation/devicetree/bindings/thermal/thermal*.yaml -[4] Documentation/devicetree/bindings/sram/sram.yaml -[5] Documentation/devicetree/bindings/reset/reset.txt -[6] Documentation/devicetree/bindings/regulator/regulator.yaml - -Example: - -sram@50000000 { - compatible = "mmio-sram"; - reg = <0x0 0x50000000 0x0 0x10000>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0x50000000 0x10000>; - - cpu_scp_lpri: scp-shmem@0 { - compatible = "arm,scmi-shmem"; - reg = <0x0 0x200>; - }; - - cpu_scp_hpri: scp-shmem@200 { - compatible = "arm,scmi-shmem"; - reg = <0x200 0x200>; - }; -}; - -mailbox@40000000 { - .... - #mbox-cells = <1>; - reg = <0x0 0x40000000 0x0 0x10000>; -}; - -firmware { - - ... - - scmi { - compatible = "arm,scmi"; - mboxes = <&mailbox 0 &mailbox 1>; - mbox-names = "tx", "rx"; - shmem = <&cpu_scp_lpri &cpu_scp_hpri>; - #address-cells = <1>; - #size-cells = <0>; - - scmi_devpd: protocol@11 { - reg = <0x11>; - #power-domain-cells = <1>; - }; - - scmi_dvfs: protocol@13 { - reg = <0x13>; - #clock-cells = <1>; - }; - - scmi_clk: protocol@14 { - reg = <0x14>; - #clock-cells = <1>; - }; - - scmi_sensors0: protocol@15 { - reg = <0x15>; - #thermal-sensor-cells = <1>; - }; - - scmi_reset: protocol@16 { - reg = <0x16>; - #reset-cells = <1>; - }; - - scmi_voltage: protocol@17 { - reg = <0x17>; - - regulators { - regulator_devX: regulator@0 { - reg = <0x0>; - regulator-max-microvolt = <3300000>; - }; - - regulator_devY: regulator@9 { - reg = <0x9>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <4200000>; - }; - - ... - }; - }; - }; -}; - -cpu@0 { - ... - reg = <0 0>; - clocks = <&scmi_dvfs 0>; -}; - -hdlcd@7ff60000 { - ... - reg = <0 0x7ff60000 0 0x1000>; - clocks = <&scmi_clk 4>; - power-domains = <&scmi_devpd 1>; - resets = <&scmi_reset 10>; -}; - -thermal-zones { - soc_thermal { - polling-delay-passive = <100>; - polling-delay = <1000>; - /* sensor ID */ - thermal-sensors = <&scmi_sensors0 3>; - ... - }; -}; diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt deleted file mode 100644 index bcd6c3ec471e..000000000000 --- a/Documentation/devicetree/bindings/arm/arm,scpi.txt +++ /dev/null @@ -1,219 +0,0 @@ -System Control and Power Interface (SCPI) Message Protocol ----------------------------------------------------------- - -Firmware implementing the SCPI described in ARM document number ARM DUI 0922B -("ARM Compute Subsystem SCP: Message Interface Protocols")[0] can be used -by Linux to initiate various system control and power operations. - -Required properties: - -- compatible : should be - * "arm,scpi" : For implementations complying to SCPI v1.0 or above - * "arm,scpi-pre-1.0" : For implementations complying to all - unversioned releases prior to SCPI v1.0 -- mboxes: List of phandle and mailbox channel specifiers - All the channels reserved by remote SCP firmware for use by - SCPI message protocol should be specified in any order -- shmem : List of phandle pointing to the shared memory(SHM) area between the - processors using these mailboxes for IPC, one for each mailbox - SHM can be any memory reserved for the purpose of this communication - between the processors. - -See Documentation/devicetree/bindings/mailbox/mailbox.txt -for more details about the generic mailbox controller and -client driver bindings. - -Clock bindings for the clocks based on SCPI Message Protocol ------------------------------------------------------------- - -This binding uses the common clock binding[1]. - -Container Node -============== -Required properties: -- compatible : should be "arm,scpi-clocks" - All the clocks provided by SCP firmware via SCPI message - protocol much be listed as sub-nodes under this node. - -Sub-nodes -========= -Required properties: -- compatible : shall include one of the following - "arm,scpi-dvfs-clocks" - all the clocks that are variable and index based. - These clocks don't provide an entire range of values between the - limits but only discrete points within the range. The firmware - provides the mapping for each such operating frequency and the - index associated with it. The firmware also manages the - voltage scaling appropriately with the clock scaling. - "arm,scpi-variable-clocks" - all the clocks that are variable and provide full - range within the specified range. The firmware provides the - range of values within a specified range. - -Other required properties for all clocks(all from common clock binding): -- #clock-cells : Should be 1. Contains the Clock ID value used by SCPI commands. -- clock-output-names : shall be the corresponding names of the outputs. -- clock-indices: The identifying number for the clocks(i.e.clock_id) in the - node. It can be non linear and hence provide the mapping of identifiers - into the clock-output-names array. - -SRAM and Shared Memory for SCPI -------------------------------- - -A small area of SRAM is reserved for SCPI communication between application -processors and SCP. - -The properties should follow the generic mmio-sram description found in [3] - -Each sub-node represents the reserved area for SCPI. - -Required sub-node properties: -- reg : The base offset and size of the reserved area with the SRAM -- compatible : should be "arm,scp-shmem" for Non-secure SRAM based - shared memory - -Sensor bindings for the sensors based on SCPI Message Protocol --------------------------------------------------------------- -SCPI provides an API to access the various sensors on the SoC. - -Required properties: -- compatible : should be "arm,scpi-sensors". -- #thermal-sensor-cells: should be set to 1. This property follows the - thermal device tree bindings[2]. - - Valid cell values are raw identifiers (Sensor ID) - as used by the firmware. Refer to platform details - for your implementation for the IDs to use. - -Power domain bindings for the power domains based on SCPI Message Protocol ------------------------------------------------------------- - -This binding uses the generic power domain binding[4]. - -PM domain providers -=================== - -Required properties: - - #power-domain-cells : Should be 1. Contains the device or the power - domain ID value used by SCPI commands. - - num-domains: Total number of power domains provided by SCPI. This is - needed as the SCPI message protocol lacks a mechanism to - query this information at runtime. - -PM domain consumers -=================== - -Required properties: - - power-domains : A phandle and PM domain specifier as defined by bindings of - the power controller specified by phandle. - -[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/thermal/thermal*.yaml -[3] Documentation/devicetree/bindings/sram/sram.yaml -[4] Documentation/devicetree/bindings/power/power-domain.yaml - -Example: - -sram: sram@50000000 { - compatible = "arm,juno-sram-ns", "mmio-sram"; - reg = <0x0 0x50000000 0x0 0x10000>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0x50000000 0x10000>; - - cpu_scp_lpri: scp-shmem@0 { - compatible = "arm,juno-scp-shmem"; - reg = <0x0 0x200>; - }; - - cpu_scp_hpri: scp-shmem@200 { - compatible = "arm,juno-scp-shmem"; - reg = <0x200 0x200>; - }; -}; - -mailbox: mailbox0@40000000 { - .... - #mbox-cells = <1>; -}; - -scpi_protocol: scpi@2e000000 { - compatible = "arm,scpi"; - mboxes = <&mailbox 0 &mailbox 1>; - shmem = <&cpu_scp_lpri &cpu_scp_hpri>; - - clocks { - compatible = "arm,scpi-clocks"; - - scpi_dvfs: scpi_clocks@0 { - compatible = "arm,scpi-dvfs-clocks"; - #clock-cells = <1>; - clock-indices = <0>, <1>, <2>; - clock-output-names = "atlclk", "aplclk","gpuclk"; - }; - scpi_clk: scpi_clocks@3 { - compatible = "arm,scpi-variable-clocks"; - #clock-cells = <1>; - clock-indices = <3>, <4>; - clock-output-names = "pxlclk0", "pxlclk1"; - }; - }; - - scpi_sensors0: sensors { - compatible = "arm,scpi-sensors"; - #thermal-sensor-cells = <1>; - }; - - scpi_devpd: scpi-power-domains { - compatible = "arm,scpi-power-domains"; - num-domains = <2>; - #power-domain-cells = <1>; - }; -}; - -cpu@0 { - ... - reg = <0 0>; - clocks = <&scpi_dvfs 0>; -}; - -hdlcd@7ff60000 { - ... - reg = <0 0x7ff60000 0 0x1000>; - clocks = <&scpi_clk 4>; - power-domains = <&scpi_devpd 1>; -}; - -thermal-zones { - soc_thermal { - polling-delay-passive = <100>; - polling-delay = <1000>; - - /* sensor ID */ - thermal-sensors = <&scpi_sensors0 3>; - ... - }; -}; - -In the above example, the #clock-cells is set to 1 as required. -scpi_dvfs has 3 output clocks namely: atlclk, aplclk, and gpuclk with 0, -1 and 2 as clock-indices. scpi_clk has 2 output clocks namely: pxlclk0 -and pxlclk1 with 3 and 4 as clock-indices. - -The first consumer in the example is cpu@0 and it has '0' as the clock -specifier which points to the first entry in the output clocks of -scpi_dvfs i.e. "atlclk". - -Similarly the second example is hdlcd@7ff60000 and it has pxlclk1 as input -clock. '4' in the clock specifier here points to the second entry -in the output clocks of scpi_clocks i.e. "pxlclk1" - -The thermal-sensors property in the soc_thermal node uses the -temperature sensor provided by SCP firmware to setup a thermal -zone. The ID "3" is the sensor identifier for the temperature sensor -as used by the firmware. - -The num-domains property in scpi-power-domains domain specifies that -SCPI provides 2 power domains. The hdlcd node uses the power domain with -domain ID 1. diff --git a/Documentation/devicetree/bindings/arm/arm,scu.yaml b/Documentation/devicetree/bindings/arm/arm,scu.yaml new file mode 100644 index 000000000000..dae2aa27e641 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,scu.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,scu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Snoop Control Unit (SCU) + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + As part of the MPCore complex, Cortex-A5 and Cortex-A9 are provided + with a Snoop Control Unit. The register range is usually 256 (0x100) + bytes. + + References: + - Cortex-A9: see DDI0407E Cortex-A9 MPCore Technical Reference Manual + Revision r2p0 + - Cortex-A5: see DDI0434B Cortex-A5 MPCore Technical Reference Manual + Revision r0p1 + - ARM11 MPCore: see DDI0360F ARM 11 MPCore Processor Technical Reference + Manial Revision r2p0 + +properties: + compatible: + enum: + - arm,cortex-a9-scu + - arm,cortex-a5-scu + - arm,arm11mp-scu + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + scu@a0410000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xa0410000 0x100>; + }; diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index f3c7249c73d6..9a2432a88074 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -257,6 +257,13 @@ properties: where voltage is in V, frequency is in MHz. + performance-domains: + maxItems: 1 + description: + List of phandles and performance domain specifiers, as defined by + bindings of the performance domain provider. See also + dvfs/performance-domain.yaml. + power-domains: description: List of phandles and PM domain specifiers, as defined by bindings of the diff --git a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt deleted file mode 100644 index d38834c67dff..000000000000 --- a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt +++ /dev/null @@ -1,31 +0,0 @@ -OP-TEE Device Tree Bindings - -OP-TEE is a piece of software using hardware features to provide a Trusted -Execution Environment. The security can be provided with ARM TrustZone, but -also by virtualization or a separate chip. - -We're using "linaro" as the first part of the compatible property for -the reference implementation maintained by Linaro. - -* OP-TEE based on ARM TrustZone required properties: - -- compatible : should contain "linaro,optee-tz" - -- method : The method of calling the OP-TEE Trusted OS. Permitted - values are: - - "smc" : SMC #0, with the register assignments specified - in drivers/tee/optee/optee_smc.h - - "hvc" : HVC #0, with the register assignments specified - in drivers/tee/optee/optee_smc.h - - - -Example: - firmware { - optee { - compatible = "linaro,optee-tz"; - method = "smc"; - }; - }; diff --git a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml new file mode 100644 index 000000000000..c24047c1fdd5 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/firmware/linaro,optee-tz.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OP-TEE Device Tree Bindings + +maintainers: + - Jens Wiklander <jens.wiklander@linaro.org> + +description: | + OP-TEE is a piece of software using hardware features to provide a Trusted + Execution Environment. The security can be provided with ARM TrustZone, but + also by virtualization or a separate chip. + + We're using "linaro" as the first part of the compatible property for + the reference implementation maintained by Linaro. + +properties: + $nodename: + const: optee + + compatible: + const: linaro,optee-tz + + method: + enum: [smc, hvc] + description: | + The method of calling the OP-TEE Trusted OS depending on smc or hvc + instruction usage. + SMC #0, register assignments + or + HVC #0, register assignments + register assignments are specified in drivers/tee/optee/optee_smc.h + +required: + - compatible + - method + +additionalProperties: false + +examples: + - | + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + - | + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "hvc"; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index 395359dc94fd..fd0061712443 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -86,13 +86,11 @@ This binding uses the common clock binding[1]. Required properties: - compatible: Should be one of: - "fsl,imx8qm-clock" - "fsl,imx8qxp-clock" + "fsl,imx8qm-clk" + "fsl,imx8qxp-clk" followed by "fsl,scu-clk" -- #clock-cells: Should be either - 2: Contains the Resource and Clock ID value. - or - 1: Contains the Clock ID value. (DEPRECATED) +- #clock-cells: Should be 2. + Contains the Resource and Clock ID value. - clocks: List of clock specifiers, must contain an entry for each required entry in clock-names - clock-names: Should include entries "xtal_32KHz", "xtal_24MHz" diff --git a/Documentation/devicetree/bindings/arm/intel,keembay.yaml b/Documentation/devicetree/bindings/arm/intel,keembay.yaml index 69cd30872928..107e686ab207 100644 --- a/Documentation/devicetree/bindings/arm/intel,keembay.yaml +++ b/Documentation/devicetree/bindings/arm/intel,keembay.yaml @@ -11,6 +11,8 @@ maintainers: - Daniele Alessandrelli <daniele.alessandrelli@intel.com> properties: + $nodename: + const: '/' compatible: items: - enum: diff --git a/Documentation/devicetree/bindings/arm/juno,scpi.txt b/Documentation/devicetree/bindings/arm/juno,scpi.txt deleted file mode 100644 index 2ace8696bbee..000000000000 --- a/Documentation/devicetree/bindings/arm/juno,scpi.txt +++ /dev/null @@ -1,26 +0,0 @@ -System Control and Power Interface (SCPI) Message Protocol -(in addition to the standard binding in [0]) - -Juno SRAM and Shared Memory for SCPI ------------------------------------- - -Required properties: -- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM - -Each sub-node represents the reserved area for SCPI. - -Required sub-node properties: -- reg : The base offset and size of the reserved area with the SRAM -- compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based - shared memory on Juno platforms - -Sensor bindings for the sensors based on SCPI Message Protocol --------------------------------------------------------------- -Required properties: -- compatible : should be "arm,scpi-sensors". -- #thermal-sensor-cells: should be set to 1. - For Juno R0 and Juno R1 refer to [1] for the - sensor identifiers - -[0] Documentation/devicetree/bindings/arm/arm,scpi.txt -[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt b/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt deleted file mode 100644 index 6f0cd31c1520..000000000000 --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt +++ /dev/null @@ -1,86 +0,0 @@ -Texas Instruments System Control Interface (TI-SCI) Message Protocol --------------------------------------------------------------------- - -Texas Instrument's processors including those belonging to Keystone generation -of processors have separate hardware entity which is now responsible for the -management of the System on Chip (SoC) system. These include various system -level functions as well. - -An example of such an SoC is K2G, which contains the system control hardware -block called Power Management Micro Controller (PMMC). This hardware block is -initialized early into boot process and provides services to Operating Systems -on multiple processors including ones running Linux. - -See http://processors.wiki.ti.com/index.php/TISCI for protocol definition. - -TI-SCI controller Device Node: -============================= - -The TI-SCI node describes the Texas Instrument's System Controller entity node. -This parent node may optionally have additional children nodes which describe -specific functionality such as clocks, power domain, reset or additional -functionality as may be required for the SoC. This hierarchy also describes the -relationship between the TI-SCI parent node to the child node. - -Required properties: -------------------- -- compatible: should be "ti,k2g-sci" for TI 66AK2G SoC - should be "ti,am654-sci" for for TI AM654 SoC -- mbox-names: - "rx" - Mailbox corresponding to receive path - "tx" - Mailbox corresponding to transmit path - -- mboxes: Mailboxes corresponding to the mbox-names. Each value of the mboxes - property should contain a phandle to the mailbox controller device - node and an args specifier that will be the phandle to the intended - sub-mailbox child node to be used for communication. - -See Documentation/devicetree/bindings/mailbox/mailbox.txt for more details -about the generic mailbox controller and client driver bindings. Also see -Documentation/devicetree/bindings/mailbox/ti,message-manager.txt for typical -controller that is used to communicate with this System controllers. - -Optional Properties: -------------------- -- reg-names: - debug_messages - Map the Debug message region -- reg: register space corresponding to the debug_messages -- ti,system-reboot-controller: If system reboot can be triggered by SoC reboot -- ti,host-id: Integer value corresponding to the host ID assigned by Firmware - for identification of host processing entities such as virtual - machines - -Example (K2G): -------------- - pmmc: pmmc { - compatible = "ti,k2g-sci"; - ti,host-id = <2>; - mbox-names = "rx", "tx"; - mboxes= <&msgmgr &msgmgr_proxy_pmmc_rx>, - <&msgmgr &msgmgr_proxy_pmmc_tx>; - reg-names = "debug_messages"; - reg = <0x02921800 0x800>; - }; - - -TI-SCI Client Device Node: -========================= - -Client nodes are maintained as children of the relevant TI-SCI device node. - -Example (K2G): -------------- - pmmc: pmmc { - compatible = "ti,k2g-sci"; - ... - - my_clk_node: clk_node { - ... - ... - }; - - my_pd_node: pd_node { - ... - ... - }; - }; diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml new file mode 100644 index 000000000000..34f5f877d444 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/keystone/ti,sci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI-SCI controller device node bindings + +maintainers: + - Nishanth Menon <nm@ti.com> + +description: | + Texas Instrument's processors including those belonging to Keystone generation + of processors have separate hardware entity which is now responsible for the + management of the System on Chip (SoC) system. These include various system + level functions as well. + + An example of such an SoC is K2G, which contains the system control hardware + block called Power Management Micro Controller (PMMC). This hardware block is + initialized early into boot process and provides services to Operating Systems + on multiple processors including ones running Linux. + + See http://processors.wiki.ti.com/index.php/TISCI for protocol definition. + + The TI-SCI node describes the Texas Instrument's System Controller entity node. + This parent node may optionally have additional children nodes which describe + specific functionality such as clocks, power domain, reset or additional + functionality as may be required for the SoC. This hierarchy also describes the + relationship between the TI-SCI parent node to the child node. + +properties: + $nodename: + pattern: "^system-controller@[0-9a-f]+$" + + compatible: + oneOf: + - description: System controller on TI 66AK2G SoC and other K3 SoCs + items: + - const: ti,k2g-sci + - description: System controller on TI AM654 SoC + items: + - const: ti,am654-sci + + reg-names: + description: | + Specifies the debug messages memory mapped region that is optionally + made available from TI-SCI controller. + const: debug_messages + + reg: + minItems: 1 + + mbox-names: + description: | + Specifies the mailboxes used to communicate with TI-SCI Controller + made available from TI-SCI controller. + items: + - const: rx + - const: tx + + mboxes: + minItems: 2 + + ti,system-reboot-controller: + description: Determines If system reboot can be triggered by SoC reboot + type: boolean + + ti,host-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Value corresponding to the host ID assigned by Firmware + for identification of host processing entities such as virtual machines. + + power-controller: + type: object + $ref: /schemas/soc/ti/sci-pm-domain.yaml# + + clock-controller: + type: object + $ref: /schemas/clock/ti,sci-clk.yaml# + + reset-controller: + type: object + $ref: /schemas/reset/ti,sci-reset.yaml# + +required: + - compatible + - mbox-names + - mboxes + +additionalProperties: false + +examples: + - | + pmmc: system-controller@2921800 { + compatible = "ti,k2g-sci"; + ti,system-reboot-controller; + mbox-names = "rx", "tx"; + mboxes= <&msgmgr 5 2>, + <&msgmgr 0 0>; + reg-names = "debug_messages"; + reg = <0x02921800 0x800>; + }; + + - | + dmsc: system-controller@44083000 { + compatible = "ti,k2g-sci"; + ti,host-id = <12>; + mbox-names = "rx", "tx"; + mboxes= <&secure_proxy_main 11>, + <&secure_proxy_main 13>; + reg-names = "debug_messages"; + reg = <0x44083000 0x1000>; + + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <2>; + }; + + k3_clks: clock-controller { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt index ae4afc6dcfe0..94d50a949be1 100644 --- a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt +++ b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt @@ -25,6 +25,7 @@ PROPERTIES "qcom,saw2" A more specific value could be one of: "qcom,apq8064-saw2-v1.1-cpu" + "qcom,msm8226-saw2-v2.1-cpu" "qcom,msm8974-saw2-v2.1-cpu" "qcom,apq8084-saw2-v2.1-cpu" diff --git a/Documentation/devicetree/bindings/arm/scu.txt b/Documentation/devicetree/bindings/arm/scu.txt deleted file mode 100644 index 74d0a780ce51..000000000000 --- a/Documentation/devicetree/bindings/arm/scu.txt +++ /dev/null @@ -1,28 +0,0 @@ -* ARM Snoop Control Unit (SCU) - -As part of the MPCore complex, Cortex-A5 and Cortex-A9 are provided -with a Snoop Control Unit. The register range is usually 256 (0x100) -bytes. - -References: - -- Cortex-A9: see DDI0407E Cortex-A9 MPCore Technical Reference Manual - Revision r2p0 -- Cortex-A5: see DDI0434B Cortex-A5 MPCore Technical Reference Manual - Revision r0p1 -- ARM11 MPCore: see DDI0360F ARM 11 MPCore Processor Technical Reference - Manial Revision r2p0 - -- compatible : Should be: - "arm,cortex-a9-scu" - "arm,cortex-a5-scu" - "arm,arm11mp-scu" - -- reg : Specify the base address and the size of the SCU register window. - -Example: - -scu@a0410000 { - compatible = "arm,cortex-a9-scu"; - reg = <0xa0410000 0x100>; -}; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt deleted file mode 100644 index 897eedfa2bc8..000000000000 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt +++ /dev/null @@ -1,57 +0,0 @@ -NVIDIA Tegra Activity Monitor - -The activity monitor block collects statistics about the behaviour of other -components in the system. This information can be used to derive the rate at -which the external memory needs to be clocked in order to serve all requests -from the monitored clients. - -Required properties: -- compatible: should be "nvidia,tegra<chip>-actmon" -- reg: offset and length of the register set for the device -- interrupts: standard interrupt property -- clocks: Must contain a phandle and clock specifier pair for each entry in -clock-names. See ../../clock/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - actmon - - emc -- resets: Must contain an entry for each entry in reset-names. See -../../reset/reset.txt for details. -- reset-names: Must include the following entries: - - actmon -- operating-points-v2: See ../bindings/opp/opp.txt for details. -- interconnects: Should contain entries for memory clients sitting on - MC->EMC memory interconnect path. -- interconnect-names: Should include name of the interconnect path for each - interconnect entry. Consult TRM documentation for - information about available memory clients, see MEMORY - CONTROLLER section. - -For each opp entry in 'operating-points-v2' table: -- opp-supported-hw: bitfield indicating SoC speedo ID mask -- opp-peak-kBps: peak bandwidth of the memory channel - -Example: - dfs_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp@12750000 { - opp-hz = /bits/ 64 <12750000>; - opp-supported-hw = <0x000F>; - opp-peak-kBps = <51000>; - }; - ... - }; - - actmon@6000c800 { - compatible = "nvidia,tegra124-actmon"; - reg = <0x0 0x6000c800 0x0 0x400>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA124_CLK_ACTMON>, - <&tegra_car TEGRA124_CLK_EMC>; - clock-names = "actmon", "emc"; - resets = <&tegra_car 119>; - reset-names = "actmon"; - operating-points-v2 = <&dfs_opp_table>; - interconnects = <&mc TEGRA124_MC_MPCORER &emc>; - interconnect-names = "cpu"; - }; diff --git a/Documentation/devicetree/bindings/arm/ux500/boards.txt b/Documentation/devicetree/bindings/arm/ux500/boards.txt index 89408de55bfd..18d55532d31e 100644 --- a/Documentation/devicetree/bindings/arm/ux500/boards.txt +++ b/Documentation/devicetree/bindings/arm/ux500/boards.txt @@ -20,13 +20,13 @@ during retention, system won't boot without this): compatible = "ste,dbx500-backupram" scu: - see binding for arm/scu.txt + see binding for arm/arm,scu.yaml interrupt-controller: see binding for interrupt-controller/arm,gic.txt timer: - see binding for timer/arm,twd.txt + see binding for timer/arm,twd-timer.yaml clocks: see binding for clocks/ux500.txt diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml index a75e9a8f539a..3c7a2425f3e6 100644 --- a/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml +++ b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml @@ -20,7 +20,6 @@ properties: reg: minItems: 2 - maxItems: 3 items: - description: AHCI registers - description: SATA configuration and IPFS registers diff --git a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml index d06096a7ba4b..c060c7914cae 100644 --- a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml +++ b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml @@ -53,6 +53,17 @@ required: - reg - interrupts - clocks + - power-domains + +if: + not: + properties: + compatible: + contains: + const: renesas,sata-r8a7779 +then: + required: + - resets additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml index a27025cd3909..c4b7243ddcf2 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml @@ -51,7 +51,6 @@ properties: clocks: minItems: 2 - maxItems: 4 items: - description: High Frequency Oscillator (usually at 24MHz) - description: Low Frequency Oscillator (usually at 32kHz) @@ -60,7 +59,6 @@ properties: clock-names: minItems: 2 - maxItems: 4 items: - const: hosc - const: losc diff --git a/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt b/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt deleted file mode 100644 index 2be1e038ca62..000000000000 --- a/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt +++ /dev/null @@ -1,19 +0,0 @@ -Binding for simple gpio clock multiplexer. - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be "gpio-mux-clock". -- clocks: list of two references to parent clocks. -- #clock-cells : from common clock binding; shall be set to 0. -- select-gpios : GPIO reference for selecting the parent clock. - -Example: - clock { - compatible = "gpio-mux-clock"; - clocks = <&parentclk1>, <&parentclk2>; - #clock-cells = <0>; - select-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; - }; diff --git a/Documentation/devicetree/bindings/clock/gpio-mux-clock.yaml b/Documentation/devicetree/bindings/clock/gpio-mux-clock.yaml new file mode 100644 index 000000000000..1e21f8b3a4ff --- /dev/null +++ b/Documentation/devicetree/bindings/clock/gpio-mux-clock.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/gpio-mux-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple GPIO clock multiplexer + +maintainers: + - Sergej Sawazki <ce3a@gmx.de> + +properties: + compatible: + const: gpio-mux-clock + + clocks: + items: + - description: First parent clock + - description: Second parent clock + + '#clock-cells': + const: 0 + + select-gpios: + description: GPIO reference for selecting the parent clock. + maxItems: 1 + +required: + - compatible + - clocks + - '#clock-cells' + - select-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + clock { + compatible = "gpio-mux-clock"; + clocks = <&parentclk1>, <&parentclk2>; + #clock-cells = <0>; + select-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml b/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml new file mode 100644 index 000000000000..3ceb29cec704 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/hisilicon,hi3559av100-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon SOC Clock for HI3559AV100 + +maintainers: + - Dongjiu Geng <gengdongjiu@huawei.com> + +description: | + Hisilicon SOC clock control module which supports the clocks, resets and + power domains on HI3559AV100. + + See also: + dt-bindings/clock/hi3559av100-clock.h + +properties: + compatible: + enum: + - hisilicon,hi3559av100-clock + - hisilicon,hi3559av100-shub-clock + + reg: + minItems: 1 + maxItems: 2 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 2 + description: | + First cell is reset request register offset. + Second cell is bit offset in reset request register. + +required: + - compatible + - reg + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@12010000 { + compatible = "hisilicon,hi3559av100-clock"; + #clock-cells = <1>; + #reset-cells = <2>; + reg = <0x0 0x12010000 0x0 0x10000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml index c268debe5b8d..26ed040bc717 100644 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml @@ -60,7 +60,6 @@ properties: maxItems: 2 idt,xtal-load-femtofarads: - $ref: /schemas/types.yaml#/definitions/uint32 minimum: 9000 maximum: 22760 description: Optional load capacitor for XTAL1 and XTAL2 @@ -84,8 +83,8 @@ patternProperties: enum: [ 1800000, 2500000, 3300000 ] idt,slew-percent: description: The Slew rate control for CMOS single-ended. - $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 80, 85, 90, 100 ] + additionalProperties: false required: - compatible @@ -141,13 +140,13 @@ examples: clock-names = "xin"; OUT1 { - idt,drive-mode = <VC5_CMOSD>; - idt,voltage-microvolts = <1800000>; + idt,mode = <VC5_CMOSD>; + idt,voltage-microvolt = <1800000>; idt,slew-percent = <80>; }; OUT4 { - idt,drive-mode = <VC5_LVDS>; + idt,mode = <VC5_LVDS>; }; }; }; diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml index c65b9458c0b6..6e80dbc8b8b9 100644 --- a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml +++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml @@ -22,6 +22,8 @@ select: enum: - ingenic,jz4740-cgu - ingenic,jz4725b-cgu + - ingenic,jz4760-cgu + - ingenic,jz4760b-cgu - ingenic,jz4770-cgu - ingenic,jz4780-cgu - ingenic,x1000-cgu @@ -49,6 +51,8 @@ properties: - enum: - ingenic,jz4740-cgu - ingenic,jz4725b-cgu + - ingenic,jz4760-cgu + - ingenic,jz4760b-cgu - ingenic,jz4770-cgu - ingenic,jz4780-cgu - ingenic,x1000-cgu @@ -93,6 +97,8 @@ required: patternProperties: "^usb-phy@[a-f0-9]+$": allOf: [ $ref: "../phy/ingenic,phy-usb.yaml#" ] + "^mac-phy-ctrl@[a-f0-9]+$": + allOf: [ $ref: "../net/ingenic,mac.yaml#" ] additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml new file mode 100644 index 000000000000..9f239c3960d1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,camcc-sm8250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Camera Clock & Reset Controller Binding for SM8250 + +maintainers: + - Jonathan Marek <jonathan@marek.ca> + +description: | + Qualcomm camera clock control module which supports the clocks, resets and + power domains on SM8250. + + See also dt-bindings/clock/qcom,camcc-sm8250.h + +properties: + compatible: + const: qcom,sm8250-camcc + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@ad00000 { + compatible = "qcom,sm8250-camcc"; + reg = <0x0ad00000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml index 0cdf53f41f84..6667261dc665 100644 --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml @@ -20,6 +20,7 @@ description: | properties: compatible: enum: + - qcom,sc8180x-dispcc - qcom,sm8150-dispcc - qcom,sm8250-dispcc diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml index eacccc88bbf6..8e2eac6cbfb9 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml @@ -46,7 +46,6 @@ properties: nvmem-cell-names: minItems: 1 - maxItems: 2 items: - const: calib - const: calib_backup diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml index 1121b3934cb9..b0d1c65aa354 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml @@ -27,7 +27,6 @@ properties: - description: Sleep clock source - description: PLL test clock source (Optional clock) minItems: 2 - maxItems: 3 clock-names: items: @@ -35,7 +34,6 @@ properties: - const: sleep_clk - const: core_bi_pll_test_se # Optional clock minItems: 2 - maxItems: 3 '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml new file mode 100644 index 000000000000..ab12b391effc --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sm6125.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SM6125 + +maintainers: + - Konrad Dybcio <konrad.dybcio@somainline.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SM6125. + + See also: + - dt-bindings/clock/qcom,gcc-sm6125.h + +properties: + compatible: + const: qcom,gcc-sm6125 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - compatible + - clocks + - clock-names + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + clock-controller@1400000 { + compatible = "qcom,gcc-sm6125"; + reg = <0x01400000 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", "sleep_clk"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml index 78f35832aa41..1122700dcc2b 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml @@ -36,7 +36,6 @@ properties: - description: USB3 phy wrapper pipe clock source (Optional clock) - description: USB3 phy sec pipe clock source (Optional clock) minItems: 2 - maxItems: 13 clock-names: items: @@ -54,7 +53,6 @@ properties: - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk # Optional clock minItems: 2 - maxItems: 13 '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml index 490edad25830..8453eeddf30e 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml @@ -26,9 +26,10 @@ description: | - dt-bindings/reset/qcom,gcc-msm8939.h - dt-bindings/clock/qcom,gcc-msm8660.h - dt-bindings/reset/qcom,gcc-msm8660.h - - dt-bindings/clock/qcom,gcc-msm8974.h - - dt-bindings/reset/qcom,gcc-msm8974.h + - dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974) + - dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974) - dt-bindings/clock/qcom,gcc-msm8994.h + - dt-bindings/clock/qcom,gcc-mdm9607.h - dt-bindings/clock/qcom,gcc-mdm9615.h - dt-bindings/reset/qcom,gcc-mdm9615.h - dt-bindings/clock/qcom,gcc-sdm660.h (qcom,gcc-sdm630 and qcom,gcc-sdm660) @@ -40,6 +41,8 @@ properties: - qcom,gcc-ipq4019 - qcom,gcc-ipq6018 - qcom,gcc-ipq8064 + - qcom,gcc-mdm9607 + - qcom,gcc-msm8226 - qcom,gcc-msm8660 - qcom,gcc-msm8916 - qcom,gcc-msm8939 diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt index b44a0622fb3a..6cf5a7ec2b4c 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt @@ -12,6 +12,7 @@ Required properties : "qcom,rpmcc-msm8660", "qcom,rpmcc" "qcom,rpmcc-apq8060", "qcom,rpmcc" + "qcom,rpmcc-msm8226", "qcom,rpmcc" "qcom,rpmcc-msm8916", "qcom,rpmcc" "qcom,rpmcc-msm8936", "qcom,rpmcc" "qcom,rpmcc-msm8974", "qcom,rpmcc" diff --git a/Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt b/Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt deleted file mode 100644 index 268ca615459e..000000000000 --- a/Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt +++ /dev/null @@ -1,98 +0,0 @@ -Device tree Clock bindings for Renesas EMMA Mobile EV2 - -This binding uses the common clock binding. - -* SMU -System Management Unit described in user's manual R19UH0037EJ1000_SMU. -This is not a clock provider, but clocks under SMU depend on it. - -Required properties: -- compatible: Should be "renesas,emev2-smu" -- reg: Address and Size of SMU registers - -* SMU_CLKDIV -Function block with an input mux and a divider, which corresponds to -"Serial clock generator" in fig."Clock System Overview" of the manual, -and "xxx frequency division setting register" (XXXCLKDIV) registers. -This makes internal (neither input nor output) clock that is provided -to input of xxxGCLK block. - -Required properties: -- compatible: Should be "renesas,emev2-smu-clkdiv" -- reg: Byte offset from SMU base and Bit position in the register -- clocks: Parent clocks. Input clocks as described in clock-bindings.txt -- #clock-cells: Should be <0> - -* SMU_GCLK -Clock gating node shown as "Clock stop processing block" in the -fig."Clock System Overview" of the manual. -Registers are "xxx clock gate control register" (XXXGCLKCTRL). - -Required properties: -- compatible: Should be "renesas,emev2-smu-gclk" -- reg: Byte offset from SMU base and Bit position in the register -- clocks: Input clock as described in clock-bindings.txt -- #clock-cells: Should be <0> - -Example of provider: - -usia_u0_sclkdiv: usia_u0_sclkdiv { - compatible = "renesas,emev2-smu-clkdiv"; - reg = <0x610 0>; - clocks = <&pll3_fo>, <&pll4_fo>, <&pll1_fo>, <&osc1_fo>; - #clock-cells = <0>; -}; - -usia_u0_sclk: usia_u0_sclk { - compatible = "renesas,emev2-smu-gclk"; - reg = <0x4a0 1>; - clocks = <&usia_u0_sclkdiv>; - #clock-cells = <0>; -}; - -Example of consumer: - -serial@e1020000 { - compatible = "renesas,em-uart"; - reg = <0xe1020000 0x38>; - interrupts = <0 8 0>; - clocks = <&usia_u0_sclk>; - clock-names = "sclk"; -}; - -Example of clock-tree description: - - This describes a clock path in the clock tree - c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk - -smu@e0110000 { - compatible = "renesas,emev2-smu"; - reg = <0xe0110000 0x10000>; - #address-cells = <2>; - #size-cells = <0>; - - c32ki: c32ki { - compatible = "fixed-clock"; - clock-frequency = <32768>; - #clock-cells = <0>; - }; - pll3_fo: pll3_fo { - compatible = "fixed-factor-clock"; - clocks = <&c32ki>; - clock-div = <1>; - clock-mult = <7000>; - #clock-cells = <0>; - }; - usia_u0_sclkdiv: usia_u0_sclkdiv { - compatible = "renesas,emev2-smu-clkdiv"; - reg = <0x610 0>; - clocks = <&pll3_fo>; - #clock-cells = <0>; - }; - usia_u0_sclk: usia_u0_sclk { - compatible = "renesas,emev2-smu-gclk"; - reg = <0x4a0 1>; - clocks = <&usia_u0_sclkdiv>; - #clock-cells = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/renesas,emev2-smu.yaml b/Documentation/devicetree/bindings/clock/renesas,emev2-smu.yaml new file mode 100644 index 000000000000..4d9a64800481 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,emev2-smu.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/renesas,emev2-smu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas EMMA Mobile EV2 System Management Unit + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + - Magnus Damm <magnus.damm@gmail.com> + +description: | + The System Management Unit is described in user's manual R19UH0037EJ1000_SMU. + This is not a clock provider, but clocks under SMU depend on it. + +properties: + compatible: + const: renesas,emev2-smu + + reg: + maxItems: 1 + + '#address-cells': + const: 2 + + '#size-cells': + const: 0 + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + +patternProperties: + ".*sclkdiv@.*": + type: object + + description: | + Function block with an input mux and a divider, which corresponds to + "Serial clock generator" in fig. "Clock System Overview" of the manual, + and "xxx frequency division setting register" (XXXCLKDIV) registers. + This makes internal (neither input nor output) clock that is provided + to input of xxxGCLK block. + + properties: + compatible: + const: renesas,emev2-smu-clkdiv + + reg: + maxItems: 1 + description: + Byte offset from SMU base and Bit position in the register. + + clocks: + minItems: 1 + maxItems: 4 + + '#clock-cells': + const: 0 + + required: + - compatible + - reg + - clocks + - '#clock-cells' + + additionalProperties: false + + ".*sclk@.*": + type: object + + description: | + Clock gating node shown as "Clock stop processing block" in the + fig. "Clock System Overview" of the manual. + Registers are "xxx clock gate control register" (XXXGCLKCTRL). + + properties: + compatible: + const: renesas,emev2-smu-gclk + + reg: + maxItems: 1 + description: + Byte offset from SMU base and Bit position in the register. + + clocks: + maxItems: 1 + + '#clock-cells': + const: 0 + + required: + - compatible + - reg + - clocks + - '#clock-cells' + + additionalProperties: false + +additionalProperties: true + +examples: + - | + // Example of clock-tree description: + // + // This describes a clock path in the clock tree + // c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk + clocks@e0110000 { + compatible = "renesas,emev2-smu"; + reg = <0xe0110000 0x10000>; + #address-cells = <2>; + #size-cells = <0>; + + c32ki: c32ki { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + pll3_fo: pll3_fo { + compatible = "fixed-factor-clock"; + clocks = <&c32ki>; + clock-div = <1>; + clock-mult = <7000>; + #clock-cells = <0>; + }; + usia_u0_sclkdiv: usia_u0_sclkdiv@610,0 { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x610 0>; + clocks = <&pll3_fo>; + #clock-cells = <0>; + }; + usia_u0_sclk: usia_u0_sclk@4a0,1 { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x4a0 1>; + clocks = <&usia_u0_sclkdiv>; + #clock-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt deleted file mode 100644 index aed713cf0831..000000000000 --- a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt +++ /dev/null @@ -1,46 +0,0 @@ -* Renesas R9A06G032 SYSCTRL - -Required Properties: - - - compatible: Must be: - - "renesas,r9a06g032-sysctrl" - - reg: Base address and length of the SYSCTRL IO block. - - #clock-cells: Must be 1 - - clocks: References to the parent clocks: - - external 40mhz crystal. - - external (optional) 32.768khz - - external (optional) jtag input - - external (optional) RGMII_REFCLK - - clock-names: Must be: - clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; - - #power-domain-cells: Must be 0 - -Examples --------- - - - SYSCTRL node: - - sysctrl: system-controller@4000c000 { - compatible = "renesas,r9a06g032-sysctrl"; - reg = <0x4000c000 0x1000>; - #clock-cells = <1>; - - clocks = <&ext_mclk>, <&ext_rtc_clk>, - <&ext_jtag_clk>, <&ext_rgmii_ref>; - clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; - #power-domain-cells = <0>; - }; - - - Other nodes can use the clocks provided by SYSCTRL as in: - - #include <dt-bindings/clock/r9a06g032-sysctrl.h> - uart0: serial@40060000 { - compatible = "snps,dw-apb-uart"; - reg = <0x40060000 0x400>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>; - clock-names = "baudclk", "apb_pclk"; - power-domains = <&sysctrl>; - }; diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml new file mode 100644 index 000000000000..25dbb0fac065 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/renesas,r9a06g032-sysctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1D (R9A06G032) System Controller + +maintainers: + - Gareth Williams <gareth.williams.jx@renesas.com> + - Geert Uytterhoeven <geert+renesas@glider.be> + +properties: + compatible: + const: renesas,r9a06g032-sysctrl + + reg: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: External 40 MHz crystal + - description: Optional external 32.768 kHz crystal + - description: Optional external JTAG input + - description: Optional external RGMII_REFCLK + + clock-names: + minItems: 1 + items: + - const: mclk + - const: rtc + - const: jtag + - const: rgmii_ref_ext + + '#clock-cells': + const: 1 + + '#power-domain-cells': + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + sysctrl: system-controller@4000c000 { + compatible = "renesas,r9a06g032-sysctrl"; + reg = <0x4000c000 0x1000>; + clocks = <&ext_mclk>, <&ext_rtc_clk>, <&ext_jtag_clk>, + <&ext_rgmii_ref>; + clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; + #clock-cells = <1>; + #power-domain-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml new file mode 100644 index 000000000000..30b2e3d0d25d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas RZ/G2L Clock Pulse Generator / Module Standby Mode + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: | + On Renesas RZ/G2L SoC, the CPG (Clock Pulse Generator) and Module + Standby Mode share the same register block. + + They provide the following functionalities: + - The CPG block generates various core clocks, + - The Module Standby Mode block provides two functions: + 1. Module Standby, providing a Clock Domain to control the clock supply + to individual SoC devices, + 2. Reset Control, to perform a software reset of individual SoC devices. + +properties: + compatible: + const: renesas,r9a07g044-cpg # RZ/G2{L,LC} + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + description: + Clock source to CPG can be either from external clock input (EXCLK) or + crystal oscillator (XIN/XOUT). + const: extal + + '#clock-cells': + description: | + - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" + and a core clock reference, as defined in + <dt-bindings/clock/r9a07g044-cpg.h> + - For module clocks, the two clock specifier cells must be "CPG_MOD" and + a module number, as defined in the <dt-bindings/clock/r9a07g044-cpg.h>. + const: 2 + + '#power-domain-cells': + description: + SoC devices that are part of the CPG/Module Standby Mode Clock Domain and + can be power-managed through Module Standby should refer to the CPG device + node in their "power-domains" property, as documented by the generic PM + Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml. + const: 0 + + '#reset-cells': + description: + The single reset specifier cell must be the module number, as defined in + the <dt-bindings/clock/r9a07g044-cpg.h>. + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + cpg: clock-controller@11010000 { + compatible = "renesas,r9a07g044-cpg"; + reg = <0x11010000 0x10000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/silabs,si5341.txt b/Documentation/devicetree/bindings/clock/silabs,si5341.txt index 504cce3abe46..ce55aba0ce22 100644 --- a/Documentation/devicetree/bindings/clock/silabs,si5341.txt +++ b/Documentation/devicetree/bindings/clock/silabs,si5341.txt @@ -24,9 +24,8 @@ it. The device type, speed grade and revision are determined runtime by probing. -The driver currently only supports XTAL input mode, and does not support any -fancy input configurations. They can still be programmed into the chip and -the driver will leave them "as is". +The driver currently does not support any fancy input configurations. They can +still be programmed into the chip and the driver will leave them "as is". ==I2C device node== @@ -45,9 +44,9 @@ Required properties: corresponding to inputs. Use a fixed clock for the "xtal" input. At least one must be present. - clock-names: One of: "xtal", "in0", "in1", "in2" -- vdd-supply: Regulator node for VDD Optional properties: +- vdd-supply: Regulator node for VDD - vdda-supply: Regulator node for VDDA - vdds-supply: Regulator node for VDDS - silabs,pll-m-num, silabs,pll-m-den: Numerator and denominator for PLL @@ -60,7 +59,14 @@ Optional properties: be initialized, and always performs the soft-reset routine. Since this will temporarily stop all output clocks, don't do this if the chip is generating the CPU clock for example. +- silabs,xaxb-ext-clk: When present, indicates that the XA/XB pins are used + in EXTCLK (external reference clock) rather than XTAL (crystal) mode. - interrupts: Interrupt for INTRb pin. +- silabs,iovdd-33: When present, indicates that the I2C lines are using 3.3V + rather than 1.8V thresholds. +- vddoX-supply (where X is an output index): Regulator node for VDDO for the + specified output. The driver selects the output VDD_SEL setting based on this + voltage. - #address-cells: shall be set to 1. - #size-cells: shall be set to 0. @@ -77,8 +83,6 @@ Required child node properties: - reg: number of clock output. Optional child node properties: -- vdd-supply: Regulator node for VDD for this output. The driver selects default - values for common-mode and amplitude based on the voltage. - silabs,format: Output format, one of: 1 = differential (defaults to LVDS levels) 2 = low-power (defaults to HCSL levels) diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml index 4069e09cb62d..47e1ab08c95d 100644 --- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml +++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml @@ -40,7 +40,6 @@ properties: clock-names: minItems: 1 - maxItems: 4 items: - const: ext-26m - const: ext-32k diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml index 4e385508f516..8b1ecb2ecdd5 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml +++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml @@ -54,7 +54,9 @@ properties: compatible: items: - - const: st,stm32mp1-rcc + - enum: + - st,stm32mp1-rcc-secure + - st,stm32mp1-rcc - const: syscon reg: @@ -71,7 +73,7 @@ additionalProperties: false examples: - | rcc: rcc@50000000 { - compatible = "st,stm32mp1-rcc", "syscon"; + compatible = "st,stm32mp1-rcc-secure", "syscon"; reg = <0x50000000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt index f207053e0550..d0fa1e02d06d 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt @@ -10,7 +10,10 @@ Required properties: - compatible : shall be: "st,clkgen-pll0" + "st,clkgen-pll0-a0" + "st,clkgen-pll0-c0" "st,clkgen-pll1" + "st,clkgen-pll1-c0" "st,stih407-clkgen-plla9" "st,stih418-clkgen-plla9" diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt index 7ff77fc57dff..55a18939bddd 100644 --- a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt +++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt @@ -64,6 +64,16 @@ Required properties: audio use case) "st,flexgen-video", "st,flexgen" (enable clock propagation on parent and activate synchronous mode) + "st,flexgen-stih407-a0" + "st,flexgen-stih410-a0" + "st,flexgen-stih407-c0" + "st,flexgen-stih410-c0" + "st,flexgen-stih418-c0" + "st,flexgen-stih407-d0" + "st,flexgen-stih410-d0" + "st,flexgen-stih407-d2" + "st,flexgen-stih418-d2" + "st,flexgen-stih407-d3" - #clock-cells : from common clock binding; shall be set to 1 (multiple clock outputs). diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt index d93d49342e60..c4ba2adb0b4f 100644 --- a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt +++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt @@ -12,6 +12,9 @@ This binding uses the common clock binding[1]. Required properties: - compatible : shall be: "st,quadfs" + "st,quadfs-d0" + "st,quadfs-d2" + "st,quadfs-d3" "st,quadfs-pll" diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml index 6b419a9878f3..9b537bc876b5 100644 --- a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml +++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml @@ -12,7 +12,9 @@ maintainers: properties: compatible: items: - - const: ti,am654-ehrpwm-tbclk + - enum: + - ti,am654-ehrpwm-tbclk + - ti,am64-epwm-tbclk - const: syscon "#clock-cells": diff --git a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml new file mode 100644 index 000000000000..bd8173848253 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml @@ -0,0 +1,209 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti,lmk04832.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for the Texas Instruments LMK04832 + +maintainers: + - Liam Beguin <liambeguin@gmail.com> + +description: | + Devicetree binding for the LMK04832, a clock conditioner with JEDEC JESD204B + support. The LMK04832 is pin compatible with the LMK0482x family. + + Link to datasheet, https://www.ti.com/lit/ds/symlink/lmk04832.pdf + +properties: + compatible: + enum: + - ti,lmk04832 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#clock-cells': + const: 1 + + spi-max-frequency: + maximum: 5000000 + + clocks: + items: + - description: PLL2 reference clock. + + clock-names: + items: + - const: oscin + + reset-gpios: + maxItems: 1 + + ti,spi-4wire-rdbk: + description: | + Select SPI 4wire readback pin configuration. + Available readback pins are, + CLKin_SEL0 0 + CLKin_SEL1 1 + RESET 2 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 1 + + ti,vco-hz: + description: Optional to set VCO frequency of the PLL in Hertz. + + ti,sysref-ddly: + description: SYSREF digital delay value. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 8 + maximum: 8191 + default: 8 + + ti,sysref-mux: + description: | + SYSREF Mux configuration. + Available options are, + Normal SYNC 0 + Re-clocked 1 + SYSREF Pulser 2 + SYSREF Continuous 3 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 3 + + ti,sync-mode: + description: SYNC pin configuration. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 1 + + ti,sysref-pulse-count: + description: + Number of SYSREF pulses to send when SYSREF is not in continuous mode. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] + default: 4 + +patternProperties: + "@[0-9a-d]+$": + type: object + description: + Child nodes used to configure output clocks. + + properties: + reg: + description: + clock output identifier. + minimum: 0 + maximum: 13 + + ti,clkout-fmt: + description: + Clock output format. + Available options are, + Powerdown 0x00 + LVDS 0x01 + HSDS 6 mA 0x02 + HSDS 8 mA 0x03 + LVPECL 1600 mV 0x04 + LVPECL 2000 mV 0x05 + LCPECL 0x06 + CML 16 mA 0x07 + CML 24 mA 0x08 + CML 32 mA 0x09 + CMOS (Off/Inverted) 0x0a + CMOS (Normal/Off) 0x0b + CMOS (Inverted/Inverted) 0x0c + CMOS (Inverted/Normal) 0x0d + CMOS (Normal/Inverted) 0x0e + CMOS (Normal/Normal) 0x0f + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + + ti,clkout-sysref: + description: + Select SYSREF clock path for output clock. + type: boolean + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + clocks { + lmk04832_oscin: oscin { + compatible = "fixed-clock"; + + #clock-cells = <0>; + clock-frequency = <122880000>; + clock-output-names = "lmk04832-oscin"; + }; + }; + + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + lmk04832: clock-controller@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + + compatible = "ti,lmk04832"; + spi-max-frequency = <781250>; + + reset-gpios = <&gpio_lmk 0 0 0>; + + #clock-cells = <1>; + clocks = <&lmk04832_oscin>; + clock-names = "oscin"; + + ti,spi-4wire-rdbk = <0>; + ti,vco-hz = <2457600000>; + + assigned-clocks = + <&lmk04832 0>, <&lmk04832 1>, + <&lmk04832 2>, <&lmk04832 3>, + <&lmk04832 4>, + <&lmk04832 6>, <&lmk04832 7>, + <&lmk04832 10>, <&lmk04832 11>; + assigned-clock-rates = + <122880000>, <384000>, + <122880000>, <384000>, + <122880000>, + <153600000>, <384000>, + <614400000>, <384000>; + + clkout0@0 { + reg = <0>; + ti,clkout-fmt = <0x01>; // LVDS + }; + + clkout1@1 { + reg = <1>; + ti,clkout-fmt = <0x01>; // LVDS + ti,clkout-sysref; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt deleted file mode 100644 index 4e59dc6b1778..000000000000 --- a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt +++ /dev/null @@ -1,36 +0,0 @@ -Texas Instruments TI-SCI Clocks -=============================== - -All clocks on Texas Instruments' SoCs that contain a System Controller, -are only controlled by this entity. Communication between a host processor -running an OS and the System Controller happens through a protocol known -as TI-SCI[1]. This clock implementation plugs into the common clock -framework and makes use of the TI-SCI protocol on clock API requests. - -[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt - -Required properties: -------------------- -- compatible: Must be "ti,k2g-sci-clk" -- #clock-cells: Shall be 2. - In clock consumers, this cell represents the device ID and clock ID - exposed by the PM firmware. The list of valid values for the device IDs - and clocks IDs for 66AK2G SoC are documented at - http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data - -Examples: --------- - -pmmc: pmmc { - compatible = "ti,k2g-sci"; - - k2g_clks: clocks { - compatible = "ti,k2g-sci-clk"; - #clock-cells = <2>; - }; -}; - -uart0: serial@2530c00 { - compatible = "ns16550a"; - clocks = <&k2g_clks 0x2c 0>; -}; diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml new file mode 100644 index 000000000000..0e370289a053 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti,sci-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI-SCI clock controller node bindings + +maintainers: + - Nishanth Menon <nm@ti.com> + +description: | + Some TI SoCs contain a system controller (like the Power Management Micro + Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling + the state of the various hardware modules present on the SoC. Communication + between the host processor running an OS and the system controller happens + through a protocol called TI System Control Interface (TI-SCI protocol). + + This clock controller node uses the TI SCI protocol to perform various clock + management of various hardware modules (devices) present on the SoC. This + node must be a child node of the associated TI-SCI system controller node. + +properties: + $nodename: + pattern: "^clock-controller$" + + compatible: + const: ti,k2g-sci-clk + + "#clock-cells": + const: 2 + description: + The two cells represent values that the TI-SCI controller defines. + + The first cell should contain the device ID. + + The second cell should contain the clock ID. + + Please see http://processors.wiki.ti.com/index.php/TISCI for + protocol documentation for the values to be used for different devices. + +additionalProperties: false + +examples: + - | + k3_clks: clock-controller { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt index df57009ff8e7..37a7cb6ad07d 100644 --- a/Documentation/devicetree/bindings/clock/ti/dpll.txt +++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt @@ -42,6 +42,11 @@ Required properties: "idlest" - contains the idle status register base address "mult-div1" - contains the multiplier / divider register base address "autoidle" - contains the autoidle register base address (optional) + "ssc-deltam" - DPLL supports spread spectrum clocking (SSC), contains + the frequency spreading register base address (optional) + "ssc-modfreq" - DPLL supports spread spectrum clocking (SSC), contains + the modulation frequency register base address + (optional) ti,am3-* dpll types do not have autoidle register ti,omap2-* dpll type does not support idlest / autoidle registers @@ -51,6 +56,14 @@ Optional properties: - ti,low-power-stop : DPLL supports low power stop mode, gating output - ti,low-power-bypass : DPLL output matches rate of parent bypass clock - ti,lock : DPLL locks in programmed rate + - ti,min-div : the minimum divisor to start from to round the DPLL + target rate + - ti,ssc-deltam : DPLL supports spread spectrum clocking, frequency + spreading in permille (10th of a percent) + - ti,ssc-modfreq-hz : DPLL supports spread spectrum clocking, spread + spectrum modulation frequency + - ti,ssc-downspread : DPLL supports spread spectrum clocking, boolean + to enable the downspread feature Examples: dpll_core_ck: dpll_core_ck@44e00490 { @@ -83,3 +96,10 @@ Examples: clocks = <&sys_ck>, <&sys_ck>; reg = <0x0500>, <0x0540>; }; + + dpll_disp_ck: dpll_disp_ck { + #clock-cells = <0>; + compatible = "ti,am3-dpll-no-gate-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>; + }; diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 32509b98142e..92b49bc37939 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -149,6 +149,17 @@ properties: maxItems: 6 $ref: /schemas/types.yaml#/definitions/uint32-array + sink-vdos-v1: + description: An array of u32 with each entry, a Vendor Defined Message Object (VDO), + providing additional information corresponding to the product, the detailed bit + definitions and the order of each VDO can be found in + "USB Power Delivery Specification Revision 2.0, Version 1.3" chapter 6.4.4.3.1 Discover + Identity. User can specify the VDO array via VDO_IDH/_CERT/_PRODUCT/_CABLE/_AMA defined in + dt-bindings/usb/pd.h. + minItems: 3 + maxItems: 6 + $ref: /schemas/types.yaml#/definitions/uint32-array + op-sink-microwatt: description: Sink required operating power in microwatt, if source can't offer the power, Capability Mismatch is set. Required for power sink and @@ -207,6 +218,10 @@ properties: SNK_READY for non-pd link. type: boolean +dependencies: + sink-vdos-v1: [ 'sink-vdos' ] + sink-vdos: [ 'sink-vdos-v1' ] + required: - compatible diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt index ea4994b35207..ef68711716fb 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt @@ -202,11 +202,11 @@ Example 2 (MT8173 SoC): cpu2: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a57"; + compatible = "arm,cortex-a72"; reg = <0x100>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; - clocks = <&infracfg CLK_INFRA_CA57SEL>, + clocks = <&infracfg CLK_INFRA_CA72SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cpu_opp_table_b>; @@ -214,11 +214,11 @@ Example 2 (MT8173 SoC): cpu3: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a57"; + compatible = "arm,cortex-a72"; reg = <0x101>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; - clocks = <&infracfg CLK_INFRA_CA57SEL>, + clocks = <&infracfg CLK_INFRA_CA72SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cpu_opp_table_b>; diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml index 6ab07eba7778..00648f9d9278 100644 --- a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml @@ -30,7 +30,6 @@ properties: - description: Module clock - description: MBus clock minItems: 2 - maxItems: 3 clock-names: items: @@ -38,7 +37,6 @@ properties: - const: mod - const: ram minItems: 2 - maxItems: 3 resets: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/arm,cryptocell.yaml b/Documentation/devicetree/bindings/crypto/arm,cryptocell.yaml new file mode 100644 index 000000000000..9c97874a6dbd --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/arm,cryptocell.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/arm,cryptocell.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm TrustZone CryptoCell cryptographic engine + +maintainers: + - Gilad Ben-Yossef <gilad@benyossef.com> + +properties: + compatible: + enum: + - arm,cryptocell-713-ree + - arm,cryptocell-703-ree + - arm,cryptocell-712-ree + - arm,cryptocell-710-ree + - arm,cryptocell-630p-ree + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dma-coherent: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + arm_cc712: crypto@80000000 { + compatible = "arm,cryptocell-712-ree"; + reg = <0x80000000 0x10000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt b/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt deleted file mode 100644 index 6130e6eb4af8..000000000000 --- a/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt +++ /dev/null @@ -1,25 +0,0 @@ -Arm TrustZone CryptoCell cryptographic engine - -Required properties: -- compatible: Should be one of - - "arm,cryptocell-713-ree" - "arm,cryptocell-703-ree" - "arm,cryptocell-712-ree" - "arm,cryptocell-710-ree" - "arm,cryptocell-630p-ree" -- reg: Base physical address of the engine and length of memory mapped region. -- interrupts: Interrupt number for the device. - -Optional properties: -- clocks: Reference to the crypto engine clock. -- dma-coherent: Present if dma operations are coherent. - -Examples: - - arm_cc712: crypto@80000000 { - compatible = "arm,cryptocell-712-ree"; - interrupt-parent = <&intc>; - interrupts = < 0 30 4 >; - reg = < 0x80000000 0x10000 >; - - }; diff --git a/Documentation/devicetree/bindings/crypto/cortina,sl3516-crypto.yaml b/Documentation/devicetree/bindings/crypto/cortina,sl3516-crypto.yaml new file mode 100644 index 000000000000..b633b8d0e6f0 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/cortina,sl3516-crypto.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/cortina,sl3516-crypto.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SL3516 cryptographic offloader driver + +maintainers: + - Corentin Labbe <clabbe@baylibre.com> + +properties: + compatible: + enum: + - cortina,sl3516-crypto + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/cortina,gemini-clock.h> + #include <dt-bindings/reset/cortina,gemini-reset.h> + + crypto@62000000 { + compatible = "cortina,sl3516-crypto"; + reg = <0x62000000 0x10000>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon GEMINI_RESET_SECURITY>; + clocks = <&syscon GEMINI_CLK_GATE_SECURITY>; + }; diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml index a30bf38a4a49..99be01539fcd 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml +++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml @@ -27,7 +27,6 @@ properties: - description: MXS DCP DCP interrupt - description: MXS DCP secure interrupt minItems: 2 - maxItems: 3 clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml new file mode 100644 index 000000000000..9c53c27bd20a --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2018 Linaro Ltd. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel IXP4xx cryptographic engine + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + The Intel IXP4xx cryptographic engine makes use of the IXP4xx NPE + (Network Processing Engine). Since it is not a device on its own + it is defined as a subnode of the NPE, if crypto support is + available on the platform. + +properties: + compatible: + const: intel,ixp4xx-crypto + + intel,npe-handle: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + maxItems: 1 + description: phandle to the NPE this crypto engine is using, the cell + describing the NPE instance to be used. + + queue-rx: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: phandle to the RX queue on the NPE, the cell describing + the queue instance to be used. + + queue-txready: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: phandle to the TX READY queue on the NPE, the cell describing + the queue instance to be used. + +required: + - compatible + - intel,npe-handle + - queue-rx + - queue-txready + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml new file mode 100644 index 000000000000..e3379d106728 --- /dev/null +++ b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/devfreq/nvidia,tegra30-actmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra30 Activity Monitor + +maintainers: + - Dmitry Osipenko <digetx@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + The activity monitor block collects statistics about the behaviour of other + components in the system. This information can be used to derive the rate at + which the external memory needs to be clocked in order to serve all requests + from the monitored clients. + +properties: + compatible: + enum: + - nvidia,tegra30-actmon + - nvidia,tegra114-actmon + - nvidia,tegra124-actmon + - nvidia,tegra210-actmon + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: actmon + - const: emc + + resets: + maxItems: 1 + + reset-names: + items: + - const: actmon + + interrupts: + maxItems: 1 + + interconnects: + minItems: 1 + maxItems: 12 + + interconnect-names: + minItems: 1 + maxItems: 12 + description: + Should include name of the interconnect path for each interconnect + entry. Consult TRM documentation for information about available + memory clients, see MEMORY CONTROLLER and ACTIVITY MONITOR sections. + + operating-points-v2: + description: + Should contain freqs and voltages and opp-supported-hw property, which + is a bitfield indicating SoC speedo ID mask. + + "#cooling-cells": + const: 2 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - interrupts + - interconnects + - interconnect-names + - operating-points-v2 + - "#cooling-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/memory/tegra30-mc.h> + + mc: memory-controller@7000f000 { + compatible = "nvidia,tegra30-mc"; + reg = <0x7000f000 0x400>; + clocks = <&clk 32>; + clock-names = "mc"; + + interrupts = <0 77 4>; + + #iommu-cells = <1>; + #reset-cells = <1>; + #interconnect-cells = <1>; + }; + + emc: external-memory-controller@7000f400 { + compatible = "nvidia,tegra30-emc"; + reg = <0x7000f400 0x400>; + interrupts = <0 78 4>; + clocks = <&clk 57>; + + nvidia,memory-controller = <&mc>; + operating-points-v2 = <&dvfs_opp_table>; + power-domains = <&domain>; + + #interconnect-cells = <0>; + }; + + actmon@6000c800 { + compatible = "nvidia,tegra30-actmon"; + reg = <0x6000c800 0x400>; + interrupts = <0 45 4>; + clocks = <&clk 119>, <&clk 57>; + clock-names = "actmon", "emc"; + resets = <&rst 119>; + reset-names = "actmon"; + operating-points-v2 = <&dvfs_opp_table>; + interconnects = <&mc TEGRA30_MC_MPCORER &emc>; + interconnect-names = "cpu-read"; + #cooling-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml index 12a7df0e38b2..3d8ea3c2d8dd 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml @@ -26,14 +26,12 @@ properties: reg: minItems: 1 - maxItems: 2 items: - description: Display Backend registers - description: SAT registers reg-names: minItems: 1 - maxItems: 2 items: - const: be - const: sat @@ -43,7 +41,6 @@ properties: clocks: minItems: 3 - maxItems: 4 items: - description: The backend interface clock - description: The backend module clock @@ -52,7 +49,6 @@ properties: clock-names: minItems: 3 - maxItems: 4 items: - const: ahb - const: mod @@ -61,14 +57,12 @@ properties: resets: minItems: 1 - maxItems: 2 items: - description: The Backend reset line - description: The SAT reset line reset-names: minItems: 1 - maxItems: 2 items: - const: be - const: sat diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml index a738d7c12a97..bf0bdf54e5f9 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml @@ -24,7 +24,6 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: Bus Clock - description: Module Clock diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml index 907fb47cc84a..5d42d36608d9 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml @@ -46,7 +46,6 @@ properties: clocks: minItems: 3 - maxItems: 6 items: - description: Bus Clock - description: Register Clock @@ -57,7 +56,6 @@ properties: clock-names: minItems: 3 - maxItems: 6 items: - const: iahb - const: isfr @@ -68,14 +66,12 @@ properties: resets: minItems: 1 - maxItems: 2 items: - description: HDMI Controller Reset - description: HDCP Reset reset-names: minItems: 1 - maxItems: 2 items: - const: ctrl - const: hdcp diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml index 501cec16168c..a97366aaf924 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml @@ -27,7 +27,6 @@ properties: clocks: minItems: 2 - maxItems: 4 items: - description: Bus Clock - description: Module Clock @@ -36,7 +35,6 @@ properties: clock-names: minItems: 2 - maxItems: 4 items: - const: bus - const: mod diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml index ec21e8bf2767..61ef7b337218 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml @@ -48,7 +48,6 @@ properties: clocks: minItems: 2 - maxItems: 6 items: - description: The TCON TOP interface clock - description: The TCON TOP TV0 clock @@ -59,7 +58,6 @@ properties: clock-names: minItems: 2 - maxItems: 6 items: - const: bus - const: tcon-tv0 diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml index d900cc57b4ec..9b24081a0dbd 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: brcm,bcm2835-vec + enum: + - brcm,bcm2711-vec + - brcm,bcm2835-vec reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt deleted file mode 100644 index 659523f538bf..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ /dev/null @@ -1,143 +0,0 @@ -Analog Devices ADV7511(W)/13/33/35 HDMI Encoders ------------------------------------------------- - -The ADV7511, ADV7511W, ADV7513, ADV7533 and ADV7535 are HDMI audio and video -transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space -conversion, S/PDIF, CEC and HDCP. ADV7533/5 supports the DSI interface for input -pixels, while the others support RGB interface. - -Required properties: - -- compatible: Should be one of: - "adi,adv7511" - "adi,adv7511w" - "adi,adv7513" - "adi,adv7533" - "adi,adv7535" - -- reg: I2C slave addresses - The ADV7511 internal registers are split into four pages exposed through - different I2C addresses, creating four register maps. Each map has it own - I2C address and acts as a standard slave device on the I2C bus. The main - address is mandatory, others are optional and revert to defaults if not - specified. - - -The ADV7511 supports a large number of input data formats that differ by their -color depth, color format, clock mode, bit justification and random -arrangement of components on the data bus. The combination of the following -properties describe the input and map directly to the video input tables of the -ADV7511 datasheet that document all the supported combinations. - -- adi,input-depth: Number of bits per color component at the input (8, 10 or - 12). -- adi,input-colorspace: The input color space, one of "rgb", "yuv422" or - "yuv444". -- adi,input-clock: The input clock type, one of "1x" (one clock cycle per - pixel), "2x" (two clock cycles per pixel), "ddr" (one clock cycle per pixel, - data driven on both edges). - -The following input format properties are required except in "rgb 1x" and -"yuv444 1x" modes, in which case they must not be specified. - -- adi,input-style: The input components arrangement variant (1, 2 or 3), as - listed in the input format tables in the datasheet. -- adi,input-justification: The input bit justification ("left", "evenly", - "right"). - -- avdd-supply: A 1.8V supply that powers up the AVDD pin on the chip. -- dvdd-supply: A 1.8V supply that powers up the DVDD pin on the chip. -- pvdd-supply: A 1.8V supply that powers up the PVDD pin on the chip. -- dvdd-3v-supply: A 3.3V supply that powers up the pin called DVDD_3V - on the chip. -- bgvdd-supply: A 1.8V supply that powers up the BGVDD pin. This is - needed only for ADV7511. - -The following properties are required for ADV7533 and ADV7535: - -- adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should - be one of 1, 2, 3 or 4. -- a2vdd-supply: 1.8V supply that powers up the A2VDD pin on the chip. -- v3p3-supply: A 3.3V supply that powers up the V3P3 pin on the chip. -- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be - either 1.2V or 1.8V for ADV7533 but only 1.8V for ADV7535. - -Optional properties: - -- interrupts: Specifier for the ADV7511 interrupt -- pd-gpios: Specifier for the GPIO connected to the power down signal - -- adi,clock-delay: Video data clock delay relative to the pixel clock, in ps - (-1200 ps .. 1600 ps). Defaults to no delay. -- adi,embedded-sync: The input uses synchronization signals embedded in the - data stream (similar to BT.656). Defaults to separate H/V synchronization - signals. -- adi,disable-timing-generator: Only for ADV7533 and ADV7535. Disables the - internal timing generator. The chip will rely on the sync signals in the - DSI data lanes, rather than generate its own timings for HDMI output. -- clocks: from common clock binding: reference to the CEC clock. -- clock-names: from common clock binding: must be "cec". -- reg-names : Names of maps with programmable addresses. - It can contain any map needing a non-default address. - Possible maps names are : "main", "edid", "cec", "packet" - -Required nodes: - -The ADV7511 has two video ports. Their connections are modelled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533/5, the - remote endpoint phandle should be a reference to a valid mipi_dsi_host device - node. -- Video port 1 for the HDMI output -- Audio port 2 for the HDMI audio input - - -Example -------- - - adv7511w: hdmi@39 { - compatible = "adi,adv7511w"; - /* - * The EDID page will be accessible on address 0x66 on the I2C - * bus. All other maps continue to use their default addresses. - */ - reg = <0x39>, <0x66>; - reg-names = "main", "edid"; - interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_EDGE_FALLING>; - clocks = <&cec_clock>; - clock-names = "cec"; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511w_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - - port@2 { - reg = <2>; - codec_endpoint: endpoint { - remote-endpoint = <&i2s0_cpu_endpoint>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml new file mode 100644 index 000000000000..d3dd7a79b909 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml @@ -0,0 +1,240 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADV7511/11W/13 HDMI Encoders + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: | + The ADV7511, ADV7511W and ADV7513 are HDMI audio and video + transmitters compatible with HDMI 1.4 and DVI 1.0. They support color + space conversion, S/PDIF, CEC and HDCP. The transmitter input is + parallel RGB or YUV data. + +properties: + compatible: + enum: + - adi,adv7511 + - adi,adv7511w + - adi,adv7513 + + reg: + description: | + I2C slave addresses. + + The ADV7511/11W/13 internal registers are split into four pages + exposed through different I2C addresses, creating four register + maps. Each map has it own I2C address and acts as a standard slave + device on the I2C bus. The main address is mandatory, others are + optional and revert to defaults if not specified. + minItems: 1 + maxItems: 4 + + reg-names: + description: + Names of maps with programmable addresses. It can contain any map + needing a non-default address. + minItems: 1 + items: + - const: main + - const: edid + - const: cec + - const: packet + + clocks: + description: Reference to the CEC clock. + maxItems: 1 + + clock-names: + const: cec + + interrupts: + maxItems: 1 + + pd-gpios: + description: GPIO connected to the power down signal. + maxItems: 1 + + avdd-supply: + description: A 1.8V supply that powers up the AVDD pin. + + dvdd-supply: + description: A 1.8V supply that powers up the DVDD pin. + + pvdd-supply: + description: A 1.8V supply that powers up the PVDD pin. + + dvdd-3v-supply: + description: A 3.3V supply that powers up the DVDD_3V pin. + + bgvdd-supply: + description: A 1.8V supply that powers up the BGVDD pin. + + adi,input-depth: + description: Number of bits per color component at the input. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 8, 10, 12 ] + + adi,input-colorspace: + description: Input color space. + enum: [ rgb, yuv422, yuv444 ] + + adi,input-clock: + description: | + Input clock type. + "1x": one clock cycle per pixel + "2x": two clock cycles per pixel + "dd": one clock cycle per pixel, data driven on both edges + enum: [ 1x, 2x, dd ] + + adi,clock-delay: + description: + Video data clock delay relative to the pixel clock, in ps + (-1200ps .. 1600 ps). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + adi,embedded-sync: + description: + If defined, the input uses synchronization signals embedded in the + data stream (similar to BT.656). + type: boolean + + adi,input-style: + description: + Input components arrangement variant as listed in the input + format tables in the datasheet. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 3 ] + + adi,input-justification: + description: Input bit justification. + enum: [ left, evenly, right ] + + ports: + description: + The ADV7511(W)/13 has two video ports and one audio port. This node + models their connections as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + Documentation/devicetree/bindings/graph.txt + type: object + properties: + port@0: + description: Video port for the RGB or YUV input. + type: object + + port@1: + description: Video port for the HDMI output. + type: object + + port@2: + description: Audio port for the HDMI output. + type: object + +# adi,input-colorspace and adi,input-clock are required except in +# "rgb 1x" and "yuv444 1x" modes, in which case they must not be +# specified. +if: + not: + properties: + adi,input-colorspace: + contains: + enum: [ rgb, yuv444 ] + adi,input-clock: + contains: + const: 1x + +then: + required: + - adi,input-style + - adi,input-justification + +else: + properties: + adi,input-style: false + adi,input-justification: false + + +required: + - compatible + - reg + - ports + - adi,input-depth + - adi,input-colorspace + - adi,input-clock + - avdd-supply + - dvdd-supply + - pvdd-supply + - dvdd-3v-supply + - bgvdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe6500000>; + + adv7511w: hdmi@39 { + compatible = "adi,adv7511w"; + /* + * The EDID page will be accessible on address 0x66 on the I2C + * bus. All other maps continue to use their default addresses. + */ + reg = <0x39>, <0x66>; + reg-names = "main", "edid"; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + clocks = <&cec_clock>; + clock-names = "cec"; + avdd-supply = <&v1v8>; + dvdd-supply = <&v1v8>; + pvdd-supply = <&v1v8>; + dvdd-3v-supply = <&v3v3>; + bgvdd-supply = <&v1v8>; + + adi,input-depth = <8>; + adi,input-colorspace = "yuv422"; + adi,input-clock = "1x"; + + adi,input-style = <3>; + adi,input-justification = "right"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511w_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + + port@2 { + reg = <2>; + codec_endpoint: endpoint { + remote-endpoint = <&i2s0_cpu_endpoint>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml new file mode 100644 index 000000000000..f36209137c8a --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/adi,adv7533.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADV7533/35 HDMI Encoders + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: | + The ADV7533 and ADV7535 are HDMI audio and video transmitters + compatible with HDMI 1.4 and DVI 1.0. They support color space + conversion, S/PDIF, CEC and HDCP. The transmitter input is MIPI DSI. + +properties: + compatible: + enum: + - adi,adv7533 + - adi,adv7535 + + reg: + description: | + I2C slave addresses. + + The ADV7533/35 internal registers are split into four pages + exposed through different I2C addresses, creating four register + maps. Each map has it own I2C address and acts as a standard slave + device on the I2C bus. The main address is mandatory, others are + optional and revert to defaults if not specified. + minItems: 1 + maxItems: 4 + + reg-names: + description: + Names of maps with programmable addresses. It can contain any map + needing a non-default address. + minItems: 1 + items: + - const: main + - const: edid + - const: cec + - const: packet + + clocks: + description: Reference to the CEC clock. + maxItems: 1 + + clock-names: + const: cec + + interrupts: + maxItems: 1 + + pd-gpios: + description: GPIO connected to the power down signal. + maxItems: 1 + + avdd-supply: + description: A 1.8V supply that powers up the AVDD pin. + + dvdd-supply: + description: A 1.8V supply that powers up the DVDD pin. + + pvdd-supply: + description: A 1.8V supply that powers up the PVDD pin. + + a2vdd-supply: + description: A 1.8V supply that powers up the A2VDD pin. + + v3p3-supply: + description: A 3.3V supply that powers up the V3P3 pin. + + v1p2-supply: + description: + A supply that powers up the V1P2 pin. It can be either 1.2V + or 1.8V for ADV7533 but only 1.8V for ADV7535. + + adi,disable-timing-generator: + description: + Disables the internal timing generator. The chip will rely on the + sync signals in the DSI data lanes, rather than generating its own + timings for HDMI output. + type: boolean + + adi,dsi-lanes: + description: Number of DSI data lanes connected to the DSI host. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 3, 4 ] + + ports: + description: + The ADV7533/35 has two video ports and one audio port. This node + models their connections as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + Documentation/devicetree/bindings/graph.txt + type: object + properties: + port@0: + description: + Video port for the DSI input. The remote endpoint phandle + should be a reference to a valid mipi_dsi_host_device. + type: object + + port@1: + description: Video port for the HDMI output. + type: object + + port@2: + description: Audio port for the HDMI output. + type: object + +required: + - compatible + - reg + - ports + - adi,dsi-lanes + - avdd-supply + - dvdd-supply + - pvdd-supply + - a2vdd-supply + - v3p3-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe6500000>; + + adv7533: hdmi@39 { + compatible = "adi,adv7533"; + /* + * The EDID page will be accessible on address 0x66 on the I2C + * bus. All other maps continue to use their default addresses. + */ + reg = <0x39>, <0x66>; + reg-names = "main", "edid"; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + clocks = <&cec_clock>; + clock-names = "cec"; + adi,dsi-lanes = <4>; + avdd-supply = <&v1v8>; + dvdd-supply = <&v1v8>; + pvdd-supply = <&v1v8>; + a2vdd-supply = <&v1v8>; + v3p3-supply = <&v3v3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7533_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + adv7533_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + + port@2 { + reg = <2>; + codec_endpoint: endpoint { + remote-endpoint = <&i2s0_cpu_endpoint>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml index 63427878715e..b2e8bc6da9d0 100644 --- a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml @@ -18,7 +18,6 @@ properties: reg: minItems: 1 - maxItems: 2 items: - description: Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P). @@ -26,13 +25,15 @@ properties: included in the associated PHY. - description: Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs. + - description: + Register block of mhdptx sapb registers. reg-names: minItems: 1 - maxItems: 2 items: - const: mhdptx - const: j721e-intg + - const: mhdptx-sapb clocks: maxItems: 1 @@ -99,14 +100,18 @@ allOf: properties: reg: minItems: 2 + maxItems: 3 reg-names: minItems: 2 + maxItems: 3 else: properties: reg: - maxItems: 1 + minItems: 1 + maxItems: 2 reg-names: - maxItems: 1 + minItems: 1 + maxItems: 2 required: - compatible diff --git a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml new file mode 100644 index 000000000000..9f7cc6b757cb --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/google,cros-ec-anx7688.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS EC ANX7688 HDMI to DP Converter through Type-C Port + +maintainers: + - Nicolas Boichat <drinkcat@chromium.org> + - Enric Balletbo i Serra <enric.balletbo@collabora.com> + +description: | + ChromeOS EC ANX7688 is a display bridge that converts HDMI 2.0 to + DisplayPort 1.3 Ultra-HDi (4096x2160p60). It is an Analogix ANX7688 chip + which is connected to and operated by the ChromeOS Embedded Controller + (See google,cros-ec.yaml). It is accessed using I2C tunneling through + the EC and therefore its node should be a child of an EC I2C tunnel node + (See google,cros-ec-i2c-tunnel.yaml). + +properties: + compatible: + const: google,cros-ec-anx7688 + + reg: + maxItems: 1 + description: I2C address of the device. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for HDMI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: USB Type-c connector. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + i2c_tunnel_b: i2c-tunnel1 { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + anx7688: anx7688@2c { + compatible = "google,cros-ec-anx7688"; + reg = <0x2c>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + anx7688_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + port@1 { + reg = <1>; + anx7688_out: endpoint { + remote-endpoint = <&typec_connector>; + }; + }; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml new file mode 100644 index 000000000000..6ec1d5fbb8bc --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ite,it66121.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ITE it66121 HDMI bridge Device Tree Bindings + +maintainers: + - Phong LE <ple@baylibre.com> + - Neil Armstrong <narmstrong@baylibre.com> + +description: | + The IT66121 is a high-performance and low-power single channel HDMI + transmitter, fully compliant with HDMI 1.3a, HDCP 1.2 and backward compatible + to DVI 1.0 specifications. + +properties: + compatible: + const: ite,it66121 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active low reset + + vrf12-supply: + description: Regulator for 1.2V analog core power. + + vcn33-supply: + description: Regulator for 3.3V digital core power. + + vcn18-supply: + description: Regulator for 1.8V IO core power. + + interrupts: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DPI input port. + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + bus-width: + description: + Endpoint bus width. + enum: + - 12 # 12 data lines connected and dual-edge mode + - 24 # 24 data lines connected and single-edge mode + default: 24 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: HDMI Connector port. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reset-gpios + - vrf12-supply + - vcn33-supply + - vcn18-supply + - interrupts + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + it66121hdmitx: hdmitx@4c { + compatible = "ite,it66121"; + pinctrl-names = "default"; + pinctrl-0 = <&ite_pins_default>; + vcn33-supply = <&mt6358_vcn33_wifi_reg>; + vcn18-supply = <&mt6358_vcn18_reg>; + vrf12-supply = <&mt6358_vrf12_reg>; + reset-gpios = <&pio 160 GPIO_ACTIVE_LOW>; + interrupt-parent = <&pio>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + reg = <0x4c>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + it66121_in: endpoint { + bus-width = <12>; + remote-endpoint = <&display_out>; + }; + }; + + port@1 { + reg = <1>; + hdmi_conn_out: endpoint { + remote-endpoint = <&hdmi_conn_in>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml index 735d0233a7d6..674891ee2f8e 100644 --- a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml @@ -29,7 +29,8 @@ properties: properties: port@0: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Primary MIPI port for MIPI input diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml new file mode 100644 index 000000000000..d101233ae17f --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi83.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SN65DSI83 and SN65DSI84 DSI to LVDS bridge chip + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + Texas Instruments SN65DSI83 1x Single-link MIPI DSI + to 1x Single-link LVDS + https://www.ti.com/lit/gpn/sn65dsi83 + Texas Instruments SN65DSI84 1x Single-link MIPI DSI + to 1x Dual-link or 2x Single-link LVDS + https://www.ti.com/lit/gpn/sn65dsi84 + +properties: + compatible: + enum: + - ti,sn65dsi83 + - ti,sn65dsi84 + + reg: + enum: + - 0x2c + - 0x2d + + enable-gpios: + maxItems: 1 + description: GPIO specifier for bridge_en pin (active high). + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for MIPI DSI Channel-A input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + maxItems: 4 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for MIPI DSI Channel-B input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + maxItems: 4 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-A output (panel or bridge). + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-B output (panel or bridge). + + required: + - port@0 + - port@2 + +required: + - compatible + - reg + - enable-gpios + - ports + +allOf: + - if: + properties: + compatible: + contains: + const: ti,sn65dsi83 + then: + properties: + ports: + properties: + port@1: false + port@3: false + + - if: + properties: + compatible: + contains: + const: ti,sn65dsi84 + then: + properties: + ports: + properties: + port@1: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi83"; + reg = <0x2d>; + + enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&dsi0_out>; + data-lanes = <1 2 3 4>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt deleted file mode 100644 index 82e3bc0b7485..000000000000 --- a/Documentation/devicetree/bindings/display/faraday,tve200.txt +++ /dev/null @@ -1,54 +0,0 @@ -* Faraday TV Encoder TVE200 - -Required properties: - -- compatible: must be one of: - "faraday,tve200" - "cortina,gemini-tvc", "faraday,tve200" - -- reg: base address and size of the control registers block - -- interrupts: contains an interrupt specifier for the interrupt - line from the TVE200 - -- clock-names: should contain "PCLK" for the clock line clocking the - silicon and "TVE" for the 27MHz clock to the video driver - -- clocks: contains phandle and clock specifier pairs for the entries - in the clock-names property. See - Documentation/devicetree/bindings/clock/clock-bindings.txt - -Optional properties: - -- resets: contains the reset line phandle for the block - -Required sub-nodes: - -- port: describes LCD panel signals, following the common binding - for video transmitter interfaces; see - Documentation/devicetree/bindings/media/video-interfaces.txt - This port should have the properties: - reg = <0>; - It should have one endpoint connected to a remote endpoint where - the display is connected. - -Example: - -display-controller@6a000000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "faraday,tve200"; - reg = <0x6a000000 0x1000>; - interrupts = <13 IRQ_TYPE_EDGE_RISING>; - resets = <&syscon GEMINI_RESET_TVC>; - clocks = <&syscon GEMINI_CLK_GATE_TVC>, - <&syscon GEMINI_CLK_TVC>; - clock-names = "PCLK", "TVE"; - - port@0 { - reg = <0>; - display_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.yaml b/Documentation/devicetree/bindings/display/faraday,tve200.yaml new file mode 100644 index 000000000000..e2ee77767321 --- /dev/null +++ b/Documentation/devicetree/bindings/display/faraday,tve200.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/faraday,tve200.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Faraday TV Encoder TVE200 + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +properties: + compatible: + oneOf: + - const: faraday,tve200 + - items: + - const: cortina,gemini-tvc + - const: faraday,tve200 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + + clock-names: + items: + - const: PCLK + - const: TVE + + clocks: + minItems: 2 + + resets: + minItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/cortina,gemini-clock.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/reset/cortina,gemini-reset.h> + display-controller@6a000000 { + compatible = "faraday,tve200"; + reg = <0x6a000000 0x1000>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon GEMINI_RESET_TVC>; + clocks = <&syscon GEMINI_CLK_GATE_TVC>, + <&syscon GEMINI_CLK_TVC>; + clock-names = "PCLK", "TVE"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml new file mode 100644 index 000000000000..66288b9f0aa6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,cec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek HDMI CEC Controller Device Tree Bindings + +maintainers: + - CK Hu <ck.hu@mediatek.com> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + The HDMI CEC controller handles hotplug detection and CEC communication. + +properties: + compatible: + enum: + - mediatek,mt7623-cec + - mediatek,mt8167-cec + - mediatek,mt8173-cec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + cec: cec@10013000 { + compatible = "mediatek,mt8173-cec"; + reg = <0x10013000 0xbc>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_CEC>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml new file mode 100644 index 000000000000..b6fcdfb99ab2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi-ddc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek HDMI DDC Device Tree Bindings + +maintainers: + - CK Hu <ck.hu@mediatek.com> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + The HDMI DDC i2c controller is used to interface with the HDMI DDC pins. + +properties: + compatible: + enum: + - mediatek,mt7623-hdmi-ddc + - mediatek,mt8167-hdmi-ddc + - mediatek,mt8173-hdmi-ddc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ddc-i2c + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + hdmi_ddc0: i2c@11012000 { + compatible = "mediatek,mt8173-hdmi-ddc"; + reg = <0x11012000 0x1c>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_I2C5>; + clock-names = "ddc-i2c"; + }; + +... diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt deleted file mode 100644 index b284ca51b913..000000000000 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt +++ /dev/null @@ -1,136 +0,0 @@ -Mediatek HDMI Encoder -===================== - -The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from -its parallel input. - -Required properties: -- compatible: Should be "mediatek,<chip>-hdmi". -- the supported chips are mt2701, mt7623 and mt8173 -- reg: Physical base address and length of the controller's registers -- interrupts: The interrupt signal from the function block. -- clocks: device clocks - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- clock-names: must contain "pixel", "pll", "bclk", and "spdif". -- phys: phandle link to the HDMI PHY node. - See Documentation/devicetree/bindings/phy/phy-bindings.txt for details. -- phy-names: must contain "hdmi" -- mediatek,syscon-hdmi: phandle link and register offset to the system - configuration registers. For mt8173 this must be offset 0x900 into the - MMSYS_CONFIG region: <&mmsys 0x900>. -- ports: A node containing input and output port nodes with endpoint - definitions as documented in Documentation/devicetree/bindings/graph.txt. -- port@0: The input port in the ports node should be connected to a DPI output - port. -- port@1: The output port in the ports node should be connected to the input - port of a connector node that contains a ddc-i2c-bus property, or to the - input port of an attached bridge chip, such as a SlimPort transmitter. - -HDMI CEC -======== - -The HDMI CEC controller handles hotplug detection and CEC communication. - -Required properties: -- compatible: Should be "mediatek,<chip>-cec" -- the supported chips are mt7623 and mt8173 -- reg: Physical base address and length of the controller's registers -- interrupts: The interrupt signal from the function block. -- clocks: device clock - -HDMI DDC -======== - -The HDMI DDC i2c controller is used to interface with the HDMI DDC pins. -The Mediatek's I2C controller is used to interface with I2C devices. - -Required properties: -- compatible: Should be "mediatek,<chip>-hdmi-ddc" -- the supported chips are mt7623 and mt8173 -- reg: Physical base address and length of the controller's registers -- clocks: device clock -- clock-names: Should be "ddc-i2c". - -HDMI PHY -======== -See phy/mediatek,hdmi-phy.yaml - -Example: - -cec: cec@10013000 { - compatible = "mediatek,mt8173-cec"; - reg = <0 0x10013000 0 0xbc>; - interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>; - clocks = <&infracfg CLK_INFRA_CEC>; -}; - -hdmi_phy: hdmi-phy@10209100 { - compatible = "mediatek,mt8173-hdmi-phy"; - reg = <0 0x10209100 0 0x24>; - clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>; - clock-names = "pll_ref"; - clock-output-names = "hdmitx_dig_cts"; - mediatek,ibias = <0xa>; - mediatek,ibias_up = <0x1c>; - #clock-cells = <0>; - #phy-cells = <0>; -}; - -hdmi_ddc0: i2c@11012000 { - compatible = "mediatek,mt8173-hdmi-ddc"; - reg = <0 0x11012000 0 0x1c>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; - clocks = <&pericfg CLK_PERI_I2C5>; - clock-names = "ddc-i2c"; -}; - -hdmi0: hdmi@14025000 { - compatible = "mediatek,mt8173-hdmi"; - reg = <0 0x14025000 0 0x400>; - interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>; - clocks = <&mmsys CLK_MM_HDMI_PIXEL>, - <&mmsys CLK_MM_HDMI_PLLCK>, - <&mmsys CLK_MM_HDMI_AUDIO>, - <&mmsys CLK_MM_HDMI_SPDIF>; - clock-names = "pixel", "pll", "bclk", "spdif"; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_pin>; - phys = <&hdmi_phy>; - phy-names = "hdmi"; - mediatek,syscon-hdmi = <&mmsys 0x900>; - assigned-clocks = <&topckgen CLK_TOP_HDMI_SEL>; - assigned-clock-parents = <&hdmi_phy>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - hdmi0_in: endpoint { - remote-endpoint = <&dpi0_out>; - }; - }; - - port@1 { - reg = <1>; - - hdmi0_out: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; - }; - }; -}; - -connector { - compatible = "hdmi-connector"; - type = "a"; - ddc-i2c-bus = <&hdmiddc0>; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi0_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml new file mode 100644 index 000000000000..111967efa999 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek HDMI Encoder Device Tree Bindings + +maintainers: + - CK Hu <ck.hu@mediatek.com> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from + its parallel input. + +properties: + compatible: + enum: + - mediatek,mt2701-hdmi + - mediatek,mt7623-hdmi + - mediatek,mt8167-hdmi + - mediatek,mt8173-hdmi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Pixel Clock + - description: HDMI PLL + - description: Bit Clock + - description: S/PDIF Clock + + clock-names: + items: + - const: pixel + - const: pll + - const: bclk + - const: spdif + + phys: + maxItems: 1 + + phy-names: + items: + - const: hdmi + + mediatek,syscon-hdmi: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + maxItems: 1 + description: | + phandle link and register offset to the system configuration registers. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: | + Input port node. This port should be connected to a DPI output port. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + Output port node. This port should be connected to the input port of a connector + node that contains a ddc-i2c-bus property, or to the input port of an attached + bridge chip, such as a SlimPort transmitter. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phys + - phy-names + - mediatek,syscon-hdmi + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + hdmi0: hdmi@14025000 { + compatible = "mediatek,mt8173-hdmi"; + reg = <0x14025000 0x400>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_HDMI_PIXEL>, + <&mmsys CLK_MM_HDMI_PLLCK>, + <&mmsys CLK_MM_HDMI_AUDIO>, + <&mmsys CLK_MM_HDMI_SPDIF>; + clock-names = "pixel", "pll", "bclk", "spdif"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pin>; + phys = <&hdmi_phy>; + phy-names = "hdmi"; + mediatek,syscon-hdmi = <&mmsys 0x900>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + + port@1 { + reg = <1>; + + hdmi0_out: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml new file mode 100644 index 000000000000..64d8d9e5e47a --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dp-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MSM Display Port Controller + +maintainers: + - Kuogee Hsieh <khsieh@codeaurora.org> + +description: | + Device tree bindings for DisplayPort host controller for MSM targets + that are compatible with VESA DisplayPort interface specification. + +properties: + compatible: + enum: + - qcom,sc7180-dp + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: AHB clock to enable register access + - description: Display Port AUX clock + - description: Display Port Link clock + - description: Link interface clock between DP and PHY + - description: Display Port Pixel clock + + clock-names: + items: + - const: core_iface + - const: core_aux + - const: ctrl_link + - const: ctrl_link_iface + - const: stream_pixel + + assigned-clocks: + items: + - description: link clock source + - description: pixel clock source + + assigned-clock-parents: + items: + - description: phy 0 parent + - description: phy 1 parent + + phys: + maxItems: 1 + + phy-names: + items: + - const: dp + + operating-points-v2: + maxItems: 1 + + power-domains: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input endpoint of the controller + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output endpoint of the controller + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phys + - phy-names + - "#sound-dai-cells" + - power-domains + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,dispcc-sc7180.h> + #include <dt-bindings/power/qcom-aoss-qmp.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + displayport-controller@ae90000 { + compatible = "qcom,sc7180-dp"; + reg = <0xae90000 0x1400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + + phys = <&dp_phy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + power-domains = <&rpmhpd SC7180_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&typec>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml new file mode 100644 index 000000000000..12a86b1ec1bc --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml @@ -0,0 +1,228 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-sc7180.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SC7180 target + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +description: | + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS and DPU are mentioned for SC7180 target. + +properties: + compatible: + items: + - const: qcom,sc7180-mdss + + reg: + maxItems: 1 + + reg-names: + const: mdss + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#address-cells": true + + "#size-cells": true + + "#interrupt-cells": + const: 1 + + iommus: + items: + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 + + ranges: true + + interconnects: + items: + - description: Interconnect path specifying the port ids for data bus + + interconnect-names: + const: mdp0-mem + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + description: Node containing the properties of DPU. + + properties: + compatible: + items: + - const: qcom,sc7180-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi clock + - description: Display ahb clock + - description: Display rotator clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: bus + - const: iface + - const: rot + - const: lut + - const: core + - const: vsync + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. Each output port contains an endpoint that + describes how it is connected to an external interface. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF1 (DSI1) + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF0 (DP) + + required: + - port@0 + + required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +required: + - compatible + - reg + - reg-names + - power-domains + - clocks + - interrupts + - interrupt-controller + - iommus + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc7180.h> + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sdm845.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sc7180-mdss"; + reg = <0xae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "ahb", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x800 0x2>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sc7180-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "rot", "lut", "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml new file mode 100644 index 000000000000..b4ea7c92fb3d --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml @@ -0,0 +1,212 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-sdm845.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SDM845 target + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +description: | + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS and DPU are mentioned for SDM845 target. + +properties: + compatible: + items: + - const: qcom,sdm845-mdss + + reg: + maxItems: 1 + + reg-names: + const: mdss + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AXI clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#address-cells": true + + "#size-cells": true + + "#interrupt-cells": + const: 1 + + iommus: + items: + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1 + + ranges: true + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + description: Node containing the properties of DPU. + + properties: + compatible: + items: + - const: qcom,sdm845-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display ahb clock + - description: Display axi clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + - const: vsync + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. Each output port contains an endpoint that + describes how it is connected to an external interface. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF1 (DSI1) + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF2 (DSI2) + + required: + - port@0 + - port@1 + + required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +required: + - compatible + - reg + - reg-names + - power-domains + - clocks + - interrupts + - interrupt-controller + - iommus + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sdm845-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x880 0x8>, + <&apps_smmu 0xc80 0x8>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt deleted file mode 100644 index 586e6eac5b08..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dpu.txt +++ /dev/null @@ -1,141 +0,0 @@ -Qualcomm Technologies, Inc. DPU KMS - -Description: - -Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates -sub-blocks like DPU display controller, DSI and DP interfaces etc. -The DPU display controller is found in SDM845 SoC. - -MDSS: -Required properties: -- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss" -- reg: physical base address and length of controller's registers. -- reg-names: register region names. The following region is required: - * "mdss" -- power-domains: a power domain consumer specifier according to - Documentation/devicetree/bindings/power/power_domain.txt -- clocks: list of clock specifiers for clocks needed by the device. -- clock-names: device clock names, must be in same order as clocks property. - The following clocks are required: - * "iface" - * "bus" - * "core" -- interrupts: interrupt signal from MDSS. -- interrupt-controller: identifies the node as an interrupt controller. -- #interrupt-cells: specifies the number of cells needed to encode an interrupt - source, should be 1. -- iommus: phandle of iommu device node. -- #address-cells: number of address cells for the MDSS children. Should be 1. -- #size-cells: Should be 1. -- ranges: parent bus address space is the same as the child bus address space. -- interconnects : interconnect path specifier for MDSS according to - Documentation/devicetree/bindings/interconnect/interconnect.txt. Should be - 2 paths corresponding to 2 AXI ports. -- interconnect-names : MDSS will have 2 port names to differentiate between the - 2 interconnect paths defined with interconnect specifier. - -Optional properties: -- assigned-clocks: list of clock specifiers for clocks needing rate assignment -- assigned-clock-rates: list of clock frequencies sorted in the same order as - the assigned-clocks property. - -MDP: -Required properties: -- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu" -- reg: physical base address and length of controller's registers. -- reg-names : register region names. The following region is required: - * "mdp" - * "vbif" -- clocks: list of clock specifiers for clocks needed by the device. -- clock-names: device clock names, must be in same order as clocks property. - The following clocks are required. - * "bus" - * "iface" - * "core" - * "vsync" -- interrupts: interrupt line from DPU to MDSS. -- ports: contains the list of output ports from DPU device. These ports connect - to interfaces that are external to the DPU hardware, such as DSI, DP etc. - - Each output port contains an endpoint that describes how it is connected to an - external interface. These are described by the standard properties documented - here: - Documentation/devicetree/bindings/graph.txt - Documentation/devicetree/bindings/media/video-interfaces.txt - - Port 0 -> DPU_INTF1 (DSI1) - Port 1 -> DPU_INTF2 (DSI2) - -Optional properties: -- assigned-clocks: list of clock specifiers for clocks needing rate assignment -- assigned-clock-rates: list of clock frequencies sorted in the same order as - the assigned-clocks property. - -Example: - - mdss: mdss@ae00000 { - compatible = "qcom,sdm845-mdss"; - reg = <0xae00000 0x1000>; - reg-names = "mdss"; - - power-domains = <&clock_dispcc 0>; - - clocks = <&gcc GCC_DISP_AHB_CLK>, <&gcc GCC_DISP_AXI_CLK>, - <&clock_dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "bus", "core"; - - assigned-clocks = <&clock_dispcc DISP_CC_MDSS_MDP_CLK>; - assigned-clock-rates = <300000000>; - - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - - interconnects = <&rsc_hlos MASTER_MDP0 &rsc_hlos SLAVE_EBI1>, - <&rsc_hlos MASTER_MDP1 &rsc_hlos SLAVE_EBI1>; - - interconnect-names = "mdp0-mem", "mdp1-mem"; - - iommus = <&apps_iommu 0>; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0xae00000 0xb2008>; - - mdss_mdp: mdp@ae01000 { - compatible = "qcom,sdm845-dpu"; - reg = <0 0x1000 0x8f000>, <0 0xb0000 0x2008>; - reg-names = "mdp", "vbif"; - - clocks = <&clock_dispcc DISP_CC_MDSS_AHB_CLK>, - <&clock_dispcc DISP_CC_MDSS_AXI_CLK>, - <&clock_dispcc DISP_CC_MDSS_MDP_CLK>, - <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "iface", "bus", "core", "vsync"; - - assigned-clocks = <&clock_dispcc DISP_CC_MDSS_MDP_CLK>, - <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>; - assigned-clock-rates = <0 0 300000000 19200000>; - - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - - port@1 { - reg = <1>; - dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; - }; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml new file mode 100644 index 000000000000..76348b71f736 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -0,0 +1,185 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DSI controller + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +allOf: + - $ref: "../dsi-controller.yaml#" + +properties: + compatible: + items: + - const: qcom,mdss-dsi-ctrl + + reg: + maxItems: 1 + + reg-names: + const: dsi_ctrl + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Display byte clock + - description: Display byte interface clock + - description: Display pixel clock + - description: Display escape clock + - description: Display AHB clock + - description: Display AXI clock + + clock-names: + items: + - const: byte + - const: byte_intf + - const: pixel + - const: core + - const: iface + - const: bus + + phys: + maxItems: 1 + + phy-names: + const: dsi + + "#address-cells": true + + "#size-cells": true + + syscon-sfpb: + description: A phandle to mmss_sfpb syscon node (only for DSIv2). + $ref: "/schemas/types.yaml#/definitions/phandle" + + qcom,dual-dsi-mode: + type: boolean + description: | + Indicates if the DSI controller is driving a panel which needs + 2 DSI links. + + power-domains: + maxItems: 1 + + operating-points-v2: true + + ports: + $ref: "/schemas/graph.yaml#/properties/ports" + description: | + Contains DSI controller input and output ports as children, each + containing one endpoint subnode. + + properties: + port@0: + $ref: "/schemas/graph.yaml#/properties/port" + description: | + Input endpoints of the controller. + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + maxItems: 4 + minItems: 4 + items: + enum: [ 0, 1, 2, 3 ] + + port@1: + $ref: "/schemas/graph.yaml#/properties/port" + description: | + Output endpoints of the controller. + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + maxItems: 4 + minItems: 4 + items: + enum: [ 0, 1, 2, 3 ] + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - phys + - phy-names + - power-domains + - operating-points-v2 + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&dsi_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml new file mode 100644 index 000000000000..4a26bef19360 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-phy-10nm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DSI 10nm PHY + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +allOf: + - $ref: dsi-phy-common.yaml# + +properties: + compatible: + oneOf: + - const: qcom,dsi-phy-10nm + - const: qcom,dsi-phy-10nm-8998 + + reg: + items: + - description: dsi phy register set + - description: dsi phy lane register set + - description: dsi pll register set + + reg-names: + items: + - const: dsi_phy + - const: dsi_phy_lane + - const: dsi_pll + + vdds-supply: + description: | + Connected to DSI0_MIPI_DSI_PLL_VDDA0P9 pin for sc7180 target and + connected to VDDA_MIPI_DSI_0_PLL_0P9 pin for sdm845 target + +required: + - compatible + - reg + - reg-names + - vdds-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vdds-supply = <&vdda_mipi_dsi0_pll>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml new file mode 100644 index 000000000000..72a00cce0147 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-phy-14nm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DSI 14nm PHY + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +allOf: + - $ref: dsi-phy-common.yaml# + +properties: + compatible: + oneOf: + - const: qcom,dsi-phy-14nm + - const: qcom,dsi-phy-14nm-660 + + reg: + items: + - description: dsi phy register set + - description: dsi phy lane register set + - description: dsi pll register set + + reg-names: + items: + - const: dsi_phy + - const: dsi_phy_lane + - const: dsi_pll + + vcca-supply: + description: Phandle to vcca regulator device node. + +required: + - compatible + - reg + - reg-names + - vcca-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-14nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vcca-supply = <&vcca_reg>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml new file mode 100644 index 000000000000..743806d61afe --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-phy-20nm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DSI 20nm PHY + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +allOf: + - $ref: dsi-phy-common.yaml# + +properties: + compatible: + oneOf: + - const: qcom,dsi-phy-20nm + + reg: + items: + - description: dsi pll register set + - description: dsi phy register set + - description: dsi phy regulator register set + + reg-names: + items: + - const: dsi_pll + - const: dsi_phy + - const: dsi_phy_regulator + + vcca-supply: + description: Phandle to vcca regulator device node. + + vddio-supply: + description: Phandle to vdd-io regulator device node. + +required: + - compatible + - reg + - reg-names + - vddio-supply + - vcca-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + dsi-phy@fd922a00 { + compatible = "qcom,dsi-phy-20nm"; + reg = <0xfd922a00 0xd4>, + <0xfd922b00 0x2b0>, + <0xfd922d80 0x7b>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vcca-supply = <&vcca_reg>; + vddio-supply = <&vddio_reg>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml new file mode 100644 index 000000000000..b106007116b4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-phy-28nm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DSI 28nm PHY + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +allOf: + - $ref: dsi-phy-common.yaml# + +properties: + compatible: + oneOf: + - const: qcom,dsi-phy-28nm-hpm + - const: qcom,dsi-phy-28nm-lp + - const: qcom,dsi-phy-28nm-8960 + + reg: + items: + - description: dsi pll register set + - description: dsi phy register set + - description: dsi phy regulator register set + + reg-names: + items: + - const: dsi_pll + - const: dsi_phy + - const: dsi_phy_regulator + + vddio-supply: + description: Phandle to vdd-io regulator device node. + +required: + - compatible + - reg + - reg-names + - vddio-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + dsi-phy@fd922a00 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0xfd922a00 0xd4>, + <0xfd922b00 0x2b0>, + <0xfd922d80 0x7b>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vddio-supply = <&vddio_reg>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml new file mode 100644 index 000000000000..502bdda90235 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-phy-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Description of Qualcomm Display DSI PHY common dt properties + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +description: | + This defines the DSI PHY dt properties which are common for all + dsi phy versions. + +properties: + "#clock-cells": + const: 1 + + "#phy-cells": + const: 0 + + clocks: + items: + - description: Display AHB clock + - description: Board XO source + + clock-names: + items: + - const: iface + - const: ref + +required: + - clocks + - clock-names + - "#clock-cells" + - "#phy-cells" + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt deleted file mode 100644 index b9a64d3ff184..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dsi.txt +++ /dev/null @@ -1,249 +0,0 @@ -Qualcomm Technologies Inc. adreno/snapdragon DSI output - -DSI Controller: -Required properties: -- compatible: - * "qcom,mdss-dsi-ctrl" -- reg: Physical base address and length of the registers of controller -- reg-names: The names of register regions. The following regions are required: - * "dsi_ctrl" -- interrupts: The interrupt signal from the DSI block. -- power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: Phandles to device clocks. -- clock-names: the following clocks are required: - * "mdp_core" - * "iface" - * "bus" - * "core_mmss" - * "byte" - * "pixel" - * "core" - For DSIv2, we need an additional clock: - * "src" - For DSI6G v2.0 onwards, we need also need the clock: - * "byte_intf" -- assigned-clocks: Parents of "byte" and "pixel" for the given platform. -- assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided - by a DSI PHY block. See [1] for details on clock bindings. -- vdd-supply: phandle to vdd regulator device node -- vddio-supply: phandle to vdd-io regulator device node -- vdda-supply: phandle to vdda regulator device node -- phys: phandle to DSI PHY device node -- phy-names: the name of the corresponding PHY device -- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2) -- ports: Contains 2 DSI controller ports as child nodes. Each port contains - an endpoint subnode as defined in [2] and [3]. - -Optional properties: -- panel@0: Node of panel connected to this DSI controller. - See files in [4] for each supported panel. -- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is - driving a panel which needs 2 DSI links. -- qcom,master-dsi: Boolean value indicating if the DSI controller is driving - the master link of the 2-DSI panel. -- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is - driving a 2-DSI panel whose 2 links need receive command simultaneously. -- pinctrl-names: the pin control state names; should contain "default" -- pinctrl-0: the default pinctrl state (active) -- pinctrl-n: the "sleep" pinctrl state -- ports: contains DSI controller input and output ports as children, each - containing one endpoint subnode. - - DSI Endpoint properties: - - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's - input endpoint. For port@1, set to the MDP interface output. See [2] for - device graph info. - - - data-lanes: this describes how the physical DSI data lanes are mapped - to the logical lanes on the given platform. The value contained in - index n describes what physical lane is mapped to the logical lane n - (DATAn, where n lies between 0 and 3). The clock lane position is fixed - and can't be changed. Hence, they aren't a part of the DT bindings. See - [3] for more info on the data-lanes property. - - For example: - - data-lanes = <3 0 1 2>; - - The above mapping describes that the logical data lane DATA0 is mapped to - the physical data lane DATA3, logical DATA1 to physical DATA0, logic DATA2 - to phys DATA1 and logic DATA3 to phys DATA2. - - There are only a limited number of physical to logical mappings possible: - <0 1 2 3> - <1 2 3 0> - <2 3 0 1> - <3 0 1 2> - <0 3 2 1> - <1 0 3 2> - <2 1 0 3> - <3 2 1 0> - -DSI PHY: -Required properties: -- compatible: Could be the following - * "qcom,dsi-phy-28nm-hpm" - * "qcom,dsi-phy-28nm-lp" - * "qcom,dsi-phy-20nm" - * "qcom,dsi-phy-28nm-8960" - * "qcom,dsi-phy-14nm" - * "qcom,dsi-phy-14nm-660" - * "qcom,dsi-phy-10nm" - * "qcom,dsi-phy-10nm-8998" - * "qcom,dsi-phy-7nm" - * "qcom,dsi-phy-7nm-8150" -- reg: Physical base address and length of the registers of PLL, PHY. Some - revisions require the PHY regulator base address, whereas others require the - PHY lane base address. See below for each PHY revision. -- reg-names: The names of register regions. The following regions are required: - For DSI 28nm HPM/LP/8960 PHYs and 20nm PHY: - * "dsi_pll" - * "dsi_phy" - * "dsi_phy_regulator" - For DSI 14nm, 10nm and 7nm PHYs: - * "dsi_pll" - * "dsi_phy" - * "dsi_phy_lane" -- clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating - 2 clocks: A byte clock (index 0), and a pixel clock (index 1). -- power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: Phandles to device clocks. See [1] for details on clock bindings. -- clock-names: the following clocks are required: - * "iface" - * "ref" (only required for new DTS files/entries) - For 28nm HPM/LP, 28nm 8960 PHYs: -- vddio-supply: phandle to vdd-io regulator device node - For 20nm PHY: -- vddio-supply: phandle to vdd-io regulator device node -- vcca-supply: phandle to vcca regulator device node - For 14nm PHY: -- vcca-supply: phandle to vcca regulator device node - For 10nm and 7nm PHY: -- vdds-supply: phandle to vdds regulator device node - -Optional properties: -- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY - regulator is wanted. -- qcom,mdss-mdp-transfer-time-us: Specifies the dsi transfer time for command mode - panels in microseconds. Driver uses this number to adjust - the clock rate according to the expected transfer time. - Increasing this value would slow down the mdp processing - and can result in slower performance. - Decreasing this value can speed up the mdp processing, - but this can also impact power consumption. - As a rule this time should not be higher than the time - that would be expected with the processing at the - dsi link rate since anyways this would be the maximum - transfer time that could be achieved. - If ping pong split is enabled, this time should not be higher - than two times the dsi link rate time. - If the property is not specified, then the default value is 14000 us. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/graph.txt -[3] Documentation/devicetree/bindings/media/video-interfaces.txt -[4] Documentation/devicetree/bindings/display/panel/ - -Example: - dsi0: dsi@fd922800 { - compatible = "qcom,mdss-dsi-ctrl"; - qcom,dsi-host-index = <0>; - interrupt-parent = <&mdp>; - interrupts = <4 0>; - reg-names = "dsi_ctrl"; - reg = <0xfd922800 0x200>; - power-domains = <&mmcc MDSS_GDSC>; - clock-names = - "bus", - "byte", - "core", - "core_mmss", - "iface", - "mdp_core", - "pixel"; - clocks = - <&mmcc MDSS_AXI_CLK>, - <&mmcc MDSS_BYTE0_CLK>, - <&mmcc MDSS_ESC0_CLK>, - <&mmcc MMSS_MISC_AHB_CLK>, - <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_MDP_CLK>, - <&mmcc MDSS_PCLK0_CLK>; - - assigned-clocks = - <&mmcc BYTE0_CLK_SRC>, - <&mmcc PCLK0_CLK_SRC>; - assigned-clock-parents = - <&dsi_phy0 0>, - <&dsi_phy0 1>; - - vdda-supply = <&pma8084_l2>; - vdd-supply = <&pma8084_l22>; - vddio-supply = <&pma8084_l12>; - - phys = <&dsi_phy0>; - phy-names ="dsi-phy"; - - qcom,dual-dsi-mode; - qcom,master-dsi; - qcom,sync-dual-dsi; - - qcom,mdss-mdp-transfer-time-us = <12000>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&dsi_active>; - pinctrl-1 = <&dsi_suspend>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dsi0_in: endpoint { - remote-endpoint = <&mdp_intf1_out>; - }; - }; - - port@1 { - reg = <1>; - dsi0_out: endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; - - panel: panel@0 { - compatible = "sharp,lq101r1sx01"; - reg = <0>; - link2 = <&secondary>; - - power-supply = <...>; - backlight = <...>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; - }; - - dsi_phy0: dsi-phy@fd922a00 { - compatible = "qcom,dsi-phy-28nm-hpm"; - qcom,dsi-phy-index = <0>; - reg-names = - "dsi_pll", - "dsi_phy", - "dsi_phy_regulator"; - reg = <0xfd922a00 0xd4>, - <0xfd922b00 0x2b0>, - <0xfd922d80 0x7b>; - clock-names = "iface"; - clocks = <&mmcc MDSS_AHB_CLK>; - #clock-cells = <1>; - vddio-supply = <&pma8084_l12>; - - qcom,dsi-phy-regulator-ldo-mode; - }; diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml index 31164608ba1d..49460c9dceea 100644 --- a/Documentation/devicetree/bindings/display/panel/lvds.yaml +++ b/Documentation/devicetree/bindings/display/panel/lvds.yaml @@ -51,37 +51,37 @@ properties: - "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and [VESA] specifications. Data are transferred as follows on 3 LVDS lanes. - Slot 0 1 2 3 4 5 6 - ________________ _________________ - Clock \_______________________/ - ______ ______ ______ ______ ______ ______ ______ - DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__>< - DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__>< - DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__>< + Slot 0 1 2 3 4 5 6 + ________________ _________________ + Clock \_______________________/ + ______ ______ ______ ______ ______ ______ ______ + DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__>< + DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__>< + DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__>< - "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI] specifications. Data are transferred as follows on 4 LVDS lanes. - Slot 0 1 2 3 4 5 6 - ________________ _________________ - Clock \_______________________/ - ______ ______ ______ ______ ______ ______ ______ - DATA0 ><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__>< - DATA1 ><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__>< - DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__>< - DATA3 ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__>< + Slot 0 1 2 3 4 5 6 + ________________ _________________ + Clock \_______________________/ + ______ ______ ______ ______ ______ ______ ______ + DATA0 ><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__>< + DATA1 ><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__>< + DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__>< + DATA3 ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__>< - "vesa-24" - 24-bit data mapping compatible with the [VESA] specification. Data are transferred as follows on 4 LVDS lanes. - Slot 0 1 2 3 4 5 6 - ________________ _________________ - Clock \_______________________/ - ______ ______ ______ ______ ______ ______ ______ - DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__>< - DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__>< - DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__>< - DATA3 ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__>< + Slot 0 1 2 3 4 5 6 + ________________ _________________ + Clock \_______________________/ + ______ ______ ______ ______ ______ ______ ______ + DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__>< + DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__>< + DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__>< + DATA3 ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__>< Control signals are mapped as follows. diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml new file mode 100644 index 000000000000..4cb75a5f2e3a --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,lms397kf04.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung LMS397KF04 display panel + +description: The datasheet claims this is based around a display controller + named DB7430 with a separate backlight controller. + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,lms397kf04 + + reg: true + + reset-gpios: true + + vci-supply: + description: regulator that supplies the VCI analog voltage + usually around 3.0 V + + vccio-supply: + description: regulator that supplies the VCCIO voltage usually + around 1.8 V + + backlight: true + + spi-max-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: inherited as a SPI client node, the datasheet specifies + maximum 300 ns minimum cycle which gives around 3 MHz max frequency + maximum: 3000000 + + port: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "samsung,lms397kf04"; + spi-max-frequency = <3000000>; + reg = <0>; + vci-supply = <&lcd_3v0_reg>; + vccio-supply = <&lcd_1v8_reg>; + reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + backlight = <&ktd259>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml index 121596f106da..5f4345d43020 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.yaml +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml @@ -55,7 +55,7 @@ properties: maxItems: 1 ports: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/properties/ports description: | The connections to the DU output video ports are modeled using the OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml index 75cd9c686e98..da3b889ad8fc 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml @@ -29,7 +29,6 @@ properties: clocks: minItems: 2 - maxItems: 5 items: - {} - {} @@ -41,7 +40,6 @@ properties: clock-names: minItems: 2 - maxItems: 5 items: - {} - {} diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml index 679daed4124e..ed310bbe3afe 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml +++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml @@ -29,7 +29,6 @@ properties: - description: DSI bus clock - description: Pixel clock minItems: 2 - maxItems: 3 clock-names: items: @@ -37,7 +36,6 @@ properties: - const: ref - const: px_clk minItems: 2 - maxItems: 3 resets: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml index d54f9ca207af..4ae3d75492d3 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml @@ -22,7 +22,6 @@ properties: - description: events interrupt line. - description: errors interrupt line. minItems: 1 - maxItems: 2 clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml index 403d57977ee7..d88bd93f4b80 100644 --- a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml +++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml @@ -65,7 +65,6 @@ properties: The APB clock and at least one video clock are mandatory, the audio clock is optional. minItems: 2 - maxItems: 4 items: - description: dp_apb_clk is the APB clock - description: dp_aud_clk is the Audio clock @@ -78,13 +77,11 @@ properties: clock-names: oneOf: - minItems: 2 - maxItems: 3 items: - const: dp_apb_clk - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ] - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ] - minItems: 3 - maxItems: 4 items: - const: dp_apb_clk - const: dp_aud_clk @@ -116,7 +113,6 @@ properties: maxItems: 2 phy-names: minItems: 1 - maxItems: 2 items: - const: dp-phy0 - const: dp-phy1 diff --git a/Documentation/devicetree/bindings/dma/altr,msgdma.yaml b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml new file mode 100644 index 000000000000..a4f9fe23dcd9 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/altr,msgdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera mSGDMA IP core + +maintainers: + - Olivier Dautricourt <olivier.dautricourt@orolia.com> + +description: | + Altera / Intel modular Scatter-Gather Direct Memory Access (mSGDMA) + intellectual property (IP) + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + compatible: + const: altr,socfpga-msgdma + + reg: + items: + - description: Control and Status Register Slave Port + - description: Descriptor Slave Port + - description: Response Slave Port + + reg-names: + items: + - const: csr + - const: desc + - const: resp + + interrupts: + maxItems: 1 + + "#dma-cells": + const: 1 + description: + The cell identifies the channel id (must be 0) + +required: + - compatible + - reg + - reg-names + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + msgdma_controller: dma-controller@ff200b00 { + compatible = "altr,socfpga-msgdma"; + reg = <0xff200b00 0x100>, <0xff200c00 0x100>, <0xff200d00 0x100>; + reg-names = "csr", "desc", "resp"; + interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/dma/arm-pl08x.txt b/Documentation/devicetree/bindings/dma/arm-pl08x.txt deleted file mode 100644 index 0ba81f79266f..000000000000 --- a/Documentation/devicetree/bindings/dma/arm-pl08x.txt +++ /dev/null @@ -1,59 +0,0 @@ -* ARM PrimeCells PL080 and PL081 and derivatives DMA controller - -Required properties: -- compatible: "arm,pl080", "arm,primecell"; - "arm,pl081", "arm,primecell"; - "faraday,ftdmac020", "arm,primecell" -- arm,primecell-periphid: on the FTDMAC020 the primecell ID is not hard-coded - in the hardware and must be specified here as <0x0003b080>. This number - follows the PrimeCell standard numbering using the JEP106 vendor code 0x38 - for Faraday Technology. -- reg: Address range of the PL08x registers -- interrupt: The PL08x interrupt number -- clocks: The clock running the IP core clock -- clock-names: Must contain "apb_pclk" -- lli-bus-interface-ahb1: if AHB master 1 is eligible for fetching LLIs -- lli-bus-interface-ahb2: if AHB master 2 is eligible for fetching LLIs -- mem-bus-interface-ahb1: if AHB master 1 is eligible for fetching memory contents -- mem-bus-interface-ahb2: if AHB master 2 is eligible for fetching memory contents -- #dma-cells: must be <2>. First cell should contain the DMA request, - second cell should contain either 1 or 2 depending on - which AHB master that is used. - -Optional properties: -- dma-channels: contains the total number of DMA channels supported by the DMAC -- dma-requests: contains the total number of DMA requests supported by the DMAC -- memcpy-burst-size: the size of the bursts for memcpy: 1, 4, 8, 16, 32 - 64, 128 or 256 bytes are legal values -- memcpy-bus-width: the bus width used for memcpy in bits: 8, 16 or 32 are legal - values, the Faraday FTDMAC020 can also accept 64 bits - -Clients -Required properties: -- dmas: List of DMA controller phandle, request channel and AHB master id -- dma-names: Names of the aforementioned requested channels - -Example: - -dmac0: dma-controller@10130000 { - compatible = "arm,pl080", "arm,primecell"; - reg = <0x10130000 0x1000>; - interrupt-parent = <&vica>; - interrupts = <15>; - clocks = <&hclkdma0>; - clock-names = "apb_pclk"; - lli-bus-interface-ahb1; - lli-bus-interface-ahb2; - mem-bus-interface-ahb2; - memcpy-burst-size = <256>; - memcpy-bus-width = <32>; - #dma-cells = <2>; -}; - -device@40008000 { - ... - dmas = <&dmac0 0 2 - &dmac0 1 2>; - dma-names = "tx", "rx"; - ... -}; diff --git a/Documentation/devicetree/bindings/dma/arm-pl08x.yaml b/Documentation/devicetree/bindings/dma/arm-pl08x.yaml new file mode 100644 index 000000000000..3bd9eea543ca --- /dev/null +++ b/Documentation/devicetree/bindings/dma/arm-pl08x.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/arm-pl08x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM PrimeCells PL080 and PL081 and derivatives DMA controller + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +allOf: + - $ref: "dma-controller.yaml#" + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + enum: + - arm,pl080 + - arm,pl081 + required: + - compatible + +properties: + compatible: + oneOf: + - items: + - enum: + - arm,pl080 + - arm,pl081 + - const: arm,primecell + - items: + - const: faraday,ftdma020 + - const: arm,pl080 + - const: arm,primecell + + reg: + maxItems: 1 + description: Address range of the PL08x registers + + interrupts: + minItems: 1 + description: The PL08x interrupt number + + clocks: + minItems: 1 + description: The clock running the IP core clock + + clock-names: + maxItems: 1 + + lli-bus-interface-ahb1: + type: boolean + description: if AHB master 1 is eligible for fetching LLIs + + lli-bus-interface-ahb2: + type: boolean + description: if AHB master 2 is eligible for fetching LLIs + + mem-bus-interface-ahb1: + type: boolean + description: if AHB master 1 is eligible for fetching memory contents + + mem-bus-interface-ahb2: + type: boolean + description: if AHB master 2 is eligible for fetching memory contents + + memcpy-burst-size: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 1 + - 4 + - 8 + - 16 + - 32 + - 64 + - 128 + - 256 + description: the size of the bursts for memcpy + + memcpy-bus-width: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 8 + - 16 + - 32 + - 64 + description: bus width used for memcpy in bits. FTDMAC020 also accept 64 bits + +required: + - reg + - interrupts + - clocks + - clock-names + - "#dma-cells" + +unevaluatedProperties: false + +examples: + - | + dmac0: dma-controller@10130000 { + compatible = "arm,pl080", "arm,primecell"; + reg = <0x10130000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <15>; + clocks = <&hclkdma0>; + clock-names = "apb_pclk"; + lli-bus-interface-ahb1; + lli-bus-interface-ahb2; + mem-bus-interface-ahb2; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + #dma-cells = <2>; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/reset/cortina,gemini-reset.h> + #include <dt-bindings/clock/cortina,gemini-clock.h> + dma-controller@67000000 { + compatible = "faraday,ftdma020", "arm,pl080", "arm,primecell"; + /* Faraday Technology FTDMAC020 variant */ + arm,primecell-periphid = <0x0003b080>; + reg = <0x67000000 0x1000>; + interrupts = <9 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon GEMINI_RESET_DMAC>; + clocks = <&syscon GEMINI_CLK_AHB>; + clock-names = "apb_pclk"; + /* Bus interface AHB1 (AHB0) is totally tilted */ + lli-bus-interface-ahb2; + mem-bus-interface-ahb2; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + #dma-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml index e302147e53c6..e614fe3187bb 100644 --- a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml +++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml @@ -21,6 +21,7 @@ properties: enum: - qcom,sdm845-gpi-dma - qcom,sm8150-gpi-dma + - qcom,sm8250-gpi-dma reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml index 7f2a54bc732d..d8142cbd13d3 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml @@ -52,7 +52,6 @@ properties: interrupt-names: minItems: 9 - maxItems: 17 items: - const: error - pattern: "^ch([0-9]|1[0-5])$" diff --git a/Documentation/devicetree/bindings/dma/renesas,shdma.txt b/Documentation/devicetree/bindings/dma/renesas,shdma.txt deleted file mode 100644 index a91920a49433..000000000000 --- a/Documentation/devicetree/bindings/dma/renesas,shdma.txt +++ /dev/null @@ -1,84 +0,0 @@ -* SHDMA Device Tree bindings - -Sh-/r-mobile and R-Car systems often have multiple identical DMA controller -instances, capable of serving any of a common set of DMA slave devices, using -the same configuration. To describe this topology we require all compatible -SHDMA DT nodes to be placed under a DMA multiplexer node. All such compatible -DMAC instances have the same number of channels and use the same DMA -descriptors. Therefore respective DMA DT bindings can also all be placed in the -multiplexer node. Even if there is only one such DMAC instance on a system, it -still has to be placed under such a multiplexer node. - -* DMA multiplexer - -Required properties: -- compatible: should be "renesas,shdma-mux" -- #dma-cells: should be <1>, see "dmas" property below - -Optional properties (currently unused): -- dma-channels: number of DMA channels -- dma-requests: number of DMA request signals - -* DMA controller - -Required properties: -- compatible: should be of the form "renesas,shdma-<soc>", where <soc> should - be replaced with the desired SoC model, e.g. - "renesas,shdma-r8a73a4" for the system DMAC on r8a73a4 SoC - -Example: - dmac: dma-multiplexer@0 { - compatible = "renesas,shdma-mux"; - #dma-cells = <1>; - dma-channels = <20>; - dma-requests = <256>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - dma0: dma-controller@e6700020 { - compatible = "renesas,shdma-r8a73a4"; - reg = <0 0xe6700020 0 0x89e0>; - interrupt-parent = <&gic>; - interrupts = <0 220 4 - 0 200 4 - 0 201 4 - 0 202 4 - 0 203 4 - 0 204 4 - 0 205 4 - 0 206 4 - 0 207 4 - 0 208 4 - 0 209 4 - 0 210 4 - 0 211 4 - 0 212 4 - 0 213 4 - 0 214 4 - 0 215 4 - 0 216 4 - 0 217 4 - 0 218 4 - 0 219 4>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14", "ch15", - "ch16", "ch17", "ch18", "ch19"; - }; - }; - -* DMA client - -Required properties: -- dmas: a list of <[DMA multiplexer phandle] [MID/RID value]> pairs, - where MID/RID values are fixed handles, specified in the SoC - manual -- dma-names: a list of DMA channel names, one per "dmas" entry - -Example: - dmas = <&dmac 0xd1 - &dmac 0xd2>; - dma-names = "tx", "rx"; diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt index 29fcd37082e8..f719e1612b0a 100644 --- a/Documentation/devicetree/bindings/dma/ti-edma.txt +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt @@ -33,7 +33,7 @@ The following are mandatory properties for 66AK2G SoCs only: - power-domains:Should contain a phandle to a PM domain provider node and an args specifier containing the device id value. This property is as per the binding, - Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml Optional properties: ------------------- @@ -70,7 +70,7 @@ The following are mandatory properties for 66AK2G SoCs only: - power-domains:Should contain a phandle to a PM domain provider node and an args specifier containing the device id value. This property is as per the binding, - Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml Optional properties: ------------------- diff --git a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml new file mode 100644 index 000000000000..c8b91207f34d --- /dev/null +++ b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dvfs/performance-domain.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic performance domains + +maintainers: + - Sudeep Holla <sudeep.holla@arm.com> + +description: |+ + This binding is intended for performance management of groups of devices or + CPUs that run in the same performance domain. Performance domains must not + be confused with power domains. A performance domain is defined by a set + of devices that always have to run at the same performance level. For a given + performance domain, there is a single point of control that affects all the + devices in the domain, making it impossible to set the performance level of + an individual device in the domain independently from other devices in + that domain. For example, a set of CPUs that share a voltage domain, and + have a common frequency control, is said to be in the same performance + domain. + + This device tree binding can be used to bind performance domain consumer + devices with their performance domains provided by performance domain + providers. A performance domain provider can be represented by any node in + the device tree and can provide one or more performance domains. A consumer + node can refer to the provider by a phandle and a set of phandle arguments + (so called performance domain specifiers) of length specified by the + \#performance-domain-cells property in the performance domain provider node. + +select: true + +properties: + "#performance-domain-cells": + description: + Number of cells in a performance domain specifier. Typically 0 for nodes + representing a single performance domain and 1 for nodes providing + multiple performance domains (e.g. performance controllers), but can be + any value as specified by device tree binding documentation of particular + provider. + enum: [ 0, 1 ] + + performance-domains: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + maxItems: 1 + description: + A phandle and performance domain specifier as defined by bindings of the + performance controller/provider specified by phandle. + +additionalProperties: true + +examples: + - | + performance: performance-controller@12340000 { + compatible = "qcom,cpufreq-hw"; + reg = <0x12340000 0x1000>; + #performance-domain-cells = <1>; + }; + + // The node above defines a performance controller that is a performance + // domain provider and expects one cell as its phandle argument. + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x0>; + performance-domains = <&performance 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml b/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml index 57e5270a0741..4cfc3a187004 100644 --- a/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml +++ b/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml @@ -30,14 +30,12 @@ properties: interrupts: minItems: 1 - maxItems: 2 items: - description: uncorrectable error interrupt - description: correctable error interrupt interrupt-names: minItems: 1 - maxItems: 2 items: - const: ue - const: ce diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index 021d8ae42da3..914a423ec449 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -32,7 +32,6 @@ properties: oneOf: - allOf: - minItems: 1 - maxItems: 2 items: - pattern: "^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|lc|mac)[0-9]+|spd)$" - pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$" diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml index 6a2dc8b3ed14..fbf99e346966 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.yaml +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml @@ -4,14 +4,16 @@ $id: "http://devicetree.org/schemas/eeprom/at25.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" -title: SPI EEPROMs compatible with Atmel's AT25 +title: SPI EEPROMs or FRAMs compatible with Atmel's AT25 maintainers: - Christian Eggers <ceggers@arri.de> properties: $nodename: - pattern: "^eeprom@[0-9a-f]{1,2}$" + anyOf: + - pattern: "^eeprom@[0-9a-f]{1,2}$" + - pattern: "^fram@[0-9a-f]{1,2}$" # There are multiple known vendors who manufacture EEPROM chips compatible # with Atmel's AT25. The compatible string requires two items where the @@ -31,6 +33,7 @@ properties: - microchip,25lc040 - st,m95m02 - st,m95256 + - cypress,fm25 - const: atmel,at25 @@ -47,7 +50,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072] description: - Size of the eeprom page. + Size of the eeprom page. FRAMs don't have pages. size: $ref: /schemas/types.yaml#/definitions/uint32 @@ -100,9 +103,19 @@ required: - compatible - reg - spi-max-frequency - - pagesize - - size - - address-width + +allOf: + - if: + properties: + compatible: + not: + contains: + const: cypress,fm25 + then: + required: + - pagesize + - size + - address-width additionalProperties: false @@ -125,4 +138,10 @@ examples: size = <32768>; address-width = <16>; }; + + fram@1 { + compatible = "cypress,fm25", "atmel,at25"; + reg = <1>; + spi-max-frequency = <40000000>; + }; }; diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml index a97f39109f8d..ff6ec65145cf 100644 --- a/Documentation/devicetree/bindings/example-schema.yaml +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -91,7 +91,6 @@ properties: interrupts: # Either 1 or 2 interrupts can be present minItems: 1 - maxItems: 2 items: - description: tx or combined interrupt - description: rx interrupt @@ -105,7 +104,6 @@ properties: interrupt-names: # minItems must be specified here because the default would be 2 minItems: 1 - maxItems: 2 items: - const: tx irq - const: rx irq diff --git a/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt b/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt deleted file mode 100644 index fc3888e09549..000000000000 --- a/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt +++ /dev/null @@ -1,21 +0,0 @@ - -* SM5502 MUIC (Micro-USB Interface Controller) device - -The Silicon Mitus SM5502 is a MUIC (Micro-USB Interface Controller) device -which can detect the state of external accessory when external accessory is -attached or detached and button is pressed or released. It is interfaced to -the host controller using an I2C interface. - -Required properties: -- compatible: Should be "siliconmitus,sm5502-muic" -- reg: Specifies the I2C slave address of the MUIC block. It should be 0x25 -- interrupts: Interrupt specifiers for detection interrupt sources. - -Example: - - sm5502@25 { - compatible = "siliconmitus,sm5502-muic"; - interrupt-parent = <&gpx1>; - interrupts = <5 0>; - reg = <0x25>; - }; diff --git a/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml new file mode 100644 index 000000000000..fd2e55088888 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/siliconmitus,sm5502-muic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SM5502/SM5504 MUIC (Micro-USB Interface Controller) device + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + +description: + The Silicon Mitus SM5502 is a MUIC (Micro-USB Interface Controller) device + which can detect the state of external accessory when external accessory is + attached or detached and button is pressed or released. It is interfaced to + the host controller using an I2C interface. + +properties: + compatible: + enum: + - siliconmitus,sm5502-muic + - siliconmitus,sm5504-muic + + reg: + maxItems: 1 + description: I2C slave address of the device. Usually 0x25 for SM5502, + 0x14 for SM5504. + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + extcon@25 { + compatible = "siliconmitus,sm5502-muic"; + reg = <0x25>; + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml new file mode 100644 index 000000000000..cebf6ffe70d5 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml @@ -0,0 +1,341 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2021 ARM Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/arm,scmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: System Control and Management Interface (SCMI) Message Protocol bindings + +maintainers: + - Sudeep Holla <sudeep.holla@arm.com> + +description: | + The SCMI is intended to allow agents such as OSPM to manage various functions + that are provided by the hardware platform it is running on, including power + and performance functions. + + This binding is intended to define the interface the firmware implementing + the SCMI as described in ARM document number ARM DEN 0056 ("ARM System Control + and Management Interface Platform Design Document")[0] provide for OSPM in + the device tree. + + [0] https://developer.arm.com/documentation/den0056/latest + +properties: + $nodename: + const: scmi + + compatible: + oneOf: + - description: SCMI compliant firmware with mailbox transport + items: + - const: arm,scmi + - description: SCMI compliant firmware with ARM SMC/HVC transport + items: + - const: arm,scmi-smc + + interrupts: + description: + The interrupt that indicates message completion by the platform + rather than by the return of the smc call. This should not be used + except when the platform requires such behavior. + maxItems: 1 + + interrupt-names: + const: a2p + + mbox-names: + description: + Specifies the mailboxes used to communicate with SCMI compliant + firmware. + items: + - const: tx + - const: rx + + mboxes: + description: + List of phandle and mailbox channel specifiers. It should contain + exactly one or two mailboxes, one for transmitting messages("tx") + and another optional for receiving the notifications("rx") if supported. + minItems: 1 + maxItems: 2 + + shmem: + description: + List of phandle pointing to the shared memory(SHM) area, for each + transport channel specified. + minItems: 1 + maxItems: 2 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + arm,smc-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + SMC id required when using smc or hvc transports + + protocol@11: + type: object + properties: + reg: + const: 0x11 + + '#power-domain-cells': + const: 1 + + required: + - '#power-domain-cells' + + protocol@13: + type: object + properties: + reg: + const: 0x13 + + '#clock-cells': + const: 1 + + required: + - '#clock-cells' + + protocol@14: + type: object + properties: + reg: + const: 0x14 + + '#clock-cells': + const: 1 + + required: + - '#clock-cells' + + protocol@15: + type: object + properties: + reg: + const: 0x15 + + '#thermal-sensor-cells': + const: 1 + + required: + - '#thermal-sensor-cells' + + protocol@16: + type: object + properties: + reg: + const: 0x16 + + '#reset-cells': + const: 1 + + required: + - '#reset-cells' + + protocol@17: + type: object + properties: + reg: + const: 0x17 + + regulators: + type: object + description: + The list of all regulators provided by this SCMI controller. + + patternProperties: + '^regulators@[0-9a-f]+$': + type: object + $ref: "../regulator/regulator.yaml#" + + properties: + reg: + maxItems: 1 + description: Identifier for the voltage regulator. + + required: + - reg + +additionalProperties: false + +patternProperties: + '^protocol@[0-9a-f]+$': + type: object + description: + Each sub-node represents a protocol supported. If the platform + supports a dedicated communication channel for a particular protocol, + then the corresponding transport properties must be present. + + properties: + reg: + maxItems: 1 + + mbox-names: + items: + - const: tx + - const: rx + + mboxes: + minItems: 1 + maxItems: 2 + + shmem: + minItems: 1 + maxItems: 2 + + required: + - reg + +required: + - compatible + - shmem + +if: + properties: + compatible: + contains: + const: arm,scmi +then: + properties: + interrupts: false + interrupt-names: false + + required: + - mboxes + +else: + if: + properties: + compatible: + contains: + const: arm,scmi-smc + then: + required: + - arm,smc-id + +examples: + - | + firmware { + scmi { + compatible = "arm,scmi"; + mboxes = <&mhuB 0 0>, + <&mhuB 0 1>; + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_lpri0>, + <&cpu_scp_lpri1>; + + #address-cells = <1>; + #size-cells = <0>; + + scmi_devpd: protocol@11 { + reg = <0x11>; + #power-domain-cells = <1>; + }; + + scmi_dvfs: protocol@13 { + reg = <0x13>; + #clock-cells = <1>; + + mboxes = <&mhuB 1 0>, + <&mhuB 1 1>; + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_hpri0>, + <&cpu_scp_hpri1>; + }; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + + scmi_sensors: protocol@15 { + reg = <0x15>; + #thermal-sensor-cells = <1>; + }; + + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; + + scmi_voltage: protocol@17 { + reg = <0x17>; + regulators { + #address-cells = <1>; + #size-cells = <0>; + + regulator_devX: regulator@0 { + reg = <0x0>; + regulator-max-microvolt = <3300000>; + }; + + regulator_devY: regulator@9 { + reg = <0x9>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <4200000>; + }; + }; + }; + }; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + + sram@50000000 { + compatible = "mmio-sram"; + reg = <0x0 0x50000000 0x0 0x10000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x50000000 0x10000>; + + cpu_scp_lpri0: scp-sram-section@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x80>; + }; + + cpu_scp_lpri1: scp-sram-section@80 { + compatible = "arm,scmi-shmem"; + reg = <0x80 0x80>; + }; + + cpu_scp_hpri0: scp-sram-section@100 { + compatible = "arm,scmi-shmem"; + reg = <0x100 0x80>; + }; + + cpu_scp_hpri2: scp-sram-section@180 { + compatible = "arm,scmi-shmem"; + reg = <0x180 0x80>; + }; + }; + }; + + - | + firmware { + scmi { + compatible = "arm,scmi-smc"; + shmem = <&cpu_scp_lpri0 &cpu_scp_lpri1>; + arm,smc-id = <0xc3000001>; + + #address-cells = <1>; + #size-cells = <0>; + + scmi_devpd1: protocol@11 { + reg = <0x11>; + #power-domain-cells = <1>; + }; + + }; + }; + +... diff --git a/Documentation/devicetree/bindings/firmware/arm,scpi.yaml b/Documentation/devicetree/bindings/firmware/arm,scpi.yaml new file mode 100644 index 000000000000..d7113b06454b --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/arm,scpi.yaml @@ -0,0 +1,247 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2021 ARM Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/arm,scpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: System Control and Power Interface (SCPI) Message Protocol bindings + +maintainers: + - Sudeep Holla <sudeep.holla@arm.com> + +description: | + Firmware implementing the SCPI described in ARM document number ARM DUI + 0922B ("ARM Compute Subsystem SCP: Message Interface Protocols")[0] can be + used by Linux to initiate various system control and power operations. + + This binding is intended to define the interface the firmware implementing + the SCPI provide for OSPM in the device tree. + + [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html + +properties: + $nodename: + const: scpi + + compatible: + description: + SCPI compliant firmware complying to SCPI v1.0 and above OR + SCPI compliant firmware complying to all unversioned releases + prior to SCPI v1.0 + oneOf: + - const: arm,scpi # SCPI v1.0 and above + - const: arm,scpi-pre-1.0 # Unversioned SCPI before v1.0 + - items: + - enum: + - amlogic,meson-gxbb-scpi + - const: arm,scpi-pre-1.0 + + mboxes: + description: + List of phandle and mailbox channel specifiers. All the channels reserved + by remote SCP firmware for use by SCPI message protocol should be + specified in any order. + minItems: 1 + + shmem: + description: + List of phandle pointing to the shared memory(SHM) area between the + processors using these mailboxes for IPC, one for each mailbox SHM can + be any memory reserved for the purpose of this communication between the + processors. + minItems: 1 + + power-controller: + type: object + description: + This sub-node represents SCPI power domain controller. + + properties: + compatible: + const: arm,scpi-power-domains + + '#power-domain-cells': + const: 1 + + num-domains: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Total number of power domains provided by SCPI. This is needed as + the SCPI message protocol lacks a mechanism to query this + information at runtime. + + required: + - compatible + - '#power-domain-cells' + - num-domains + + additionalProperties: false + + sensors: + type: object + description: | + This sub-node represents SCPI sensors controller. + + properties: + compatible: + oneOf: + - const: arm,scpi-sensors + - items: + - enum: + - amlogic,meson-gxbb-scpi-sensors + - const: arm,scpi-sensors + + '#thermal-sensor-cells': + const: 1 + + required: + - compatible + - '#thermal-sensor-cells' + + additionalProperties: false + + clocks: + type: object + description: + This is the container node. Each sub-node represents one of the types + of clock controller - indexed or full range. + + properties: + compatible: + const: arm,scpi-clocks + + patternProperties: + "^clocks-[0-9a-f]+$": + type: object + description: | + This sub-node represents one of the types of clock controller + - indexed or full range. + + "arm,scpi-dvfs-clocks" - all the clocks that are variable and index + based. These clocks don't provide an entire range of values between + the limits but only discrete points within the range. The firmware + provides the mapping for each such operating frequency and the index + associated with it. The firmware also manages the voltage scaling + appropriately with the clock scaling. + + "arm,scpi-variable-clocks" - all the clocks that are variable and + provide full range within the specified range. The firmware provides + the range of values within a specified range. + + properties: + compatible: + oneOf: + - const: arm,scpi-dvfs-clocks + - const: arm,scpi-variable-clocks + + '#clock-cells': + const: 1 + + clock-output-names: true + + clock-indices: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + The identifying number for the clocks(i.e.clock_id) in the node. + It can be non linear and hence provide the mapping of identifiers + into the clock-output-names array. + + required: + - compatible + - '#clock-cells' + - clock-output-names + - clock-indices + + additionalProperties: false + + required: + - compatible + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - mboxes + - shmem + +examples: + - | + firmware { + scpi { + compatible = "arm,scpi"; + mboxes = <&mhuA 1>; + shmem = <&cpu_scp_hpri>; /* HP-NonSecure */ + + scpi_devpd: power-controller { + compatible = "arm,scpi-power-domains"; + num-domains = <2>; + #power-domain-cells = <1>; + }; + + clocks { + compatible = "arm,scpi-clocks"; + + scpi_dvfs: clocks-0 { + compatible = "arm,scpi-dvfs-clocks"; + #clock-cells = <1>; + clock-indices = <0>, <1>, <2>; + clock-output-names = "atlclk", "aplclk","gpuclk"; + }; + + scpi_clk: clocks-1 { + compatible = "arm,scpi-variable-clocks"; + #clock-cells = <1>; + clock-indices = <3>, <4>; + clock-output-names = "pxlclk0", "pxlclk1"; + }; + }; + + scpi_sensors: sensors { + compatible = "arm,scpi-sensors"; + #thermal-sensor-cells = <1>; + }; + + }; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + + sram@50000000 { + compatible = "mmio-sram"; + reg = <0x0 0x50000000 0x0 0x10000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x50000000 0x10000>; + + cpu_scp_lpri: scp-sram-section@0 { + compatible = "arm,scp-shmem"; + reg = <0x0 0x200>; + }; + + cpu_scp_hpri: scp-sram-section@200 { + compatible = "arm,scp-shmem"; + reg = <0x200 0x200>; + }; + }; + }; + + - | + firmware { + scpi { + compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0"; + mboxes = <&mailbox 1 &mailbox 2>; + shmem = <&cpu_scp_lpri &cpu_scp_hpri>; + + scpi_sensors1: sensors { + compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors"; + #thermal-sensor-cells = <1>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml index 1bd2870c3a9c..c435c9f369a4 100644 --- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml +++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml @@ -26,9 +26,16 @@ properties: reg: items: - - description: NPE0 register range - - description: NPE1 register range - - description: NPE2 register range + - description: NPE0 (NPE-A) register range + - description: NPE1 (NPE-B) register range + - description: NPE2 (NPE-C) register range + + crypto: + $ref: /schemas/crypto/intel,ixp4xx-crypto.yaml# + type: object + description: Optional node for the embedded crypto engine, the node + should be named with the instance number of the NPE engine used for + the crypto engine. required: - compatible @@ -38,8 +45,15 @@ additionalProperties: false examples: - | - npe@c8006000 { + npe: npe@c8006000 { compatible = "intel,ixp4xx-network-processing-engine"; reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>; + + crypto { + compatible = "intel,ixp4xx-crypto"; + intel,npe-handle = <&npe 2>; + queue-rx = <&qmgr 30>; + queue-txready = <&qmgr 29>; + }; }; ... diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt index d787d57491a1..7d3515264838 100644 --- a/Documentation/devicetree/bindings/fpga/fpga-region.txt +++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt @@ -38,7 +38,7 @@ Partial Reconfiguration (PR) Partial Reconfiguration Region (PRR) * Also called a "reconfigurable partition" - * A PRR is a specific section of a FPGA reserved for reconfiguration. + * A PRR is a specific section of an FPGA reserved for reconfiguration. * A base (or static) FPGA image may create a set of PRR's that later may be independently reprogrammed many times. * The size and specific location of each PRR is fixed. @@ -105,7 +105,7 @@ reprogrammed independently while the rest of the system continues to function. Sequence ======== -When a DT overlay that targets a FPGA Region is applied, the FPGA Region will +When a DT overlay that targets an FPGA Region is applied, the FPGA Region will do the following: 1. Disable appropriate FPGA bridges. @@ -134,8 +134,8 @@ The intended use is that a Device Tree overlay (DTO) can be used to reprogram an FPGA while an operating system is running. An FPGA Region that exists in the live Device Tree reflects the current state. -If the live tree shows a "firmware-name" property or child nodes under a FPGA -Region, the FPGA already has been programmed. A DTO that targets a FPGA Region +If the live tree shows a "firmware-name" property or child nodes under an FPGA +Region, the FPGA already has been programmed. A DTO that targets an FPGA Region and adds the "firmware-name" property is taken as a request to reprogram the FPGA. After reprogramming is successful, the overlay is accepted into the live tree. @@ -152,9 +152,9 @@ These FPGA regions are children of FPGA bridges which are then children of the base FPGA region. The "Full Reconfiguration to add PRR's" example below shows this. -If an FPGA Region does not specify a FPGA Manager, it will inherit the FPGA +If an FPGA Region does not specify an FPGA Manager, it will inherit the FPGA Manager specified by its ancestor FPGA Region. This supports both the case -where the same FPGA Manager is used for all of a FPGA as well the case where +where the same FPGA Manager is used for all of an FPGA as well the case where a different FPGA Manager is used for each region. FPGA Regions do not inherit their ancestor FPGA regions' bridges. This prevents @@ -166,7 +166,7 @@ within the static image of the FPGA. Required properties: - compatible : should contain "fpga-region" - fpga-mgr : should contain a phandle to an FPGA Manager. Child FPGA Regions - inherit this property from their ancestor regions. A fpga-mgr property + inherit this property from their ancestor regions. An fpga-mgr property in a region will override any inherited FPGA manager. - #address-cells, #size-cells, ranges : must be present to handle address space mapping for child nodes. @@ -175,12 +175,12 @@ Optional properties: - firmware-name : should contain the name of an FPGA image file located on the firmware search path. If this property shows up in a live device tree it indicates that the FPGA has already been programmed with this image. - If this property is in an overlay targeting a FPGA region, it is a + If this property is in an overlay targeting an FPGA region, it is a request to program the FPGA with that image. - fpga-bridges : should contain a list of phandles to FPGA Bridges that must be controlled during FPGA programming along with the parent FPGA bridge. This property is optional if the FPGA Manager handles the bridges. - If the fpga-region is the child of a fpga-bridge, the list should not + If the fpga-region is the child of an fpga-bridge, the list should not contain the parent bridge. - partial-fpga-config : boolean, set if partial reconfiguration is to be done, otherwise full reconfiguration is done. @@ -279,7 +279,7 @@ Supported Use Models In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and a FPGA Region. The target of the Device Tree Overlay is the FPGA Region. Some -uses are specific to a FPGA device. +uses are specific to an FPGA device. * No FPGA Bridges In this case, the FPGA Manager which programs the FPGA also handles the @@ -300,7 +300,7 @@ uses are specific to a FPGA device. bridges need to exist in the FPGA that can gate the buses going to each FPGA region while the buses are enabled for other sections. Before any partial reconfiguration can be done, a base FPGA image must be loaded which includes - PRR's with FPGA bridges. The device tree should have a FPGA region for each + PRR's with FPGA bridges. The device tree should have an FPGA region for each PRR. Device Tree Examples diff --git a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.txt deleted file mode 100644 index 7018aa896835..000000000000 --- a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.txt +++ /dev/null @@ -1,19 +0,0 @@ -Xilinx Zynq FPGA Manager - -Required properties: -- compatible: should contain "xlnx,zynq-devcfg-1.0" -- reg: base address and size for memory mapped io -- interrupts: interrupt for the FPGA manager device -- clocks: phandle for clocks required operation -- clock-names: name for the clock, should be "ref_clk" -- syscon: phandle for access to SLCR registers - -Example: - devcfg: devcfg@f8007000 { - compatible = "xlnx,zynq-devcfg-1.0"; - reg = <0xf8007000 0x100>; - interrupts = <0 8 4>; - clocks = <&clkc 12>; - clock-names = "ref_clk"; - syscon = <&slcr>; - }; diff --git a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml new file mode 100644 index 000000000000..29daca4be47f --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fpga/xilinx-zynq-fpga-mgr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Zynq FPGA Manager Device Tree Bindings + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +properties: + compatible: + const: xlnx,zynq-devcfg-1.0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ref_clk + + syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to syscon block which provide access to SLCR registers + +required: + - compatible + - reg + - clocks + - clock-names + - syscon + +additionalProperties: false + +examples: + - | + devcfg: devcfg@f8007000 { + compatible = "xlnx,zynq-devcfg-1.0"; + reg = <0xf8007000 0x100>; + interrupts = <0 8 4>; + clocks = <&clkc 12>; + clock-names = "ref_clk"; + syscon = <&slcr>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt deleted file mode 100644 index 696ea46227d1..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt +++ /dev/null @@ -1,167 +0,0 @@ -Davinci/Keystone GPIO controller bindings - -Required Properties: -- compatible: should be "ti,dm6441-gpio": for Davinci da850 SoCs - "ti,keystone-gpio": for Keystone 2 66AK2H/K, 66AK2L, - 66AK2E SoCs - "ti,k2g-gpio", "ti,keystone-gpio": for 66AK2G - "ti,am654-gpio", "ti,keystone-gpio": for TI K3 AM654 - "ti,j721e-gpio", "ti,keystone-gpio": for J721E SoCs - "ti,am64-gpio", "ti,keystone-gpio": for AM64 SoCs - -- reg: Physical base address of the controller and the size of memory mapped - registers. - -- gpio-controller : Marks the device node as a gpio controller. - -- #gpio-cells : Should be two. - - first cell is the pin number - - second cell is used to specify optional parameters (unused) - -- interrupts: Array of GPIO interrupt number. Only banked or unbanked IRQs are - supported at a time. - -- ti,ngpio: The number of GPIO pins supported. - -- ti,davinci-gpio-unbanked: The number of GPIOs that have an individual interrupt - line to processor. - -- clocks: Should contain the device's input clock, and should be defined as per - the appropriate clock bindings consumer usage in, - - Documentation/devicetree/bindings/clock/keystone-gate.txt - for 66AK2HK/66AK2L/66AK2E SoCs or, - - Documentation/devicetree/bindings/clock/ti,sci-clk.txt - for 66AK2G SoCs - -- clock-names: Name should be "gpio"; - -Currently clock-names and clocks are needed for all keystone 2 platforms -Davinci platforms do not have DT clocks as of now. - -The GPIO controller also acts as an interrupt controller. It uses the default -two cells specifier as described in Documentation/devicetree/bindings/ -interrupt-controller/interrupts.txt. - -Example: - -gpio: gpio@1e26000 { - compatible = "ti,dm6441-gpio"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x226000 0x1000>; - interrupt-parent = <&intc>; - interrupts = <42 IRQ_TYPE_EDGE_BOTH 43 IRQ_TYPE_EDGE_BOTH - 44 IRQ_TYPE_EDGE_BOTH 45 IRQ_TYPE_EDGE_BOTH - 46 IRQ_TYPE_EDGE_BOTH 47 IRQ_TYPE_EDGE_BOTH - 48 IRQ_TYPE_EDGE_BOTH 49 IRQ_TYPE_EDGE_BOTH - 50 IRQ_TYPE_EDGE_BOTH>; - ti,ngpio = <144>; - ti,davinci-gpio-unbanked = <0>; - interrupt-controller; - #interrupt-cells = <2>; -}; - -leds { - compatible = "gpio-leds"; - - led1 { - label = "davinci:green:usr1"; - gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; - ... - }; - - led2 { - label = "davinci:red:debug1"; - gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; - ... - }; -}; - -Example for 66AK2G: - -gpio0: gpio@2603000 { - compatible = "ti,k2g-gpio", "ti,keystone-gpio"; - reg = <0x02603000 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <144>; - ti,davinci-gpio-unbanked = <0>; - clocks = <&k2g_clks 0x001b 0x0>; - clock-names = "gpio"; -}; - -Example for 66AK2HK/66AK2L/66AK2E: - -gpio0: gpio@260bf00 { - compatible = "ti,keystone-gpio"; - reg = <0x0260bf00 0x100>; - gpio-controller; - #gpio-cells = <2>; - /* HW Interrupts mapped to GPIO pins */ - interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 121 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 124 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 147 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkgpio>; - clock-names = "gpio"; - ti,ngpio = <32>; - ti,davinci-gpio-unbanked = <32>; -}; - -Example for K3 AM654: - -wkup_gpio0: wkup_gpio0@42110000 { - compatible = "ti,am654-gpio", "ti,keystone-gpio"; - reg = <0x42110000 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&intr_wkup_gpio>; - interrupts = <59 128>, <59 129>, <59 130>, <59 131>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <56>; - ti,davinci-gpio-unbanked = <0>; - clocks = <&k3_clks 59 0>; - clock-names = "gpio"; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml b/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml new file mode 100644 index 000000000000..f32e09ef937c --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml @@ -0,0 +1,185 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-davinci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO controller for Davinci and keystone devices + +maintainers: + - Keerthy <j-keerthy@ti.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,k2g-gpio + - ti,am654-gpio + - ti,j721e-gpio + - ti,am64-gpio + - const: ti,keystone-gpio + + - items: + - enum: + - ti,dm6441-gpio + - ti,keystone-gpio + + reg: + maxItems: 1 + + gpio-controller: true + + gpio-ranges: true + + gpio-line-names: + description: strings describing the names of each gpio line. + minItems: 1 + maxItems: 100 + + "#gpio-cells": + const: 2 + description: + first cell is the pin number and second cell is used to specify optional parameters (unused). + + interrupts: + description: + The interrupts are specified as per the interrupt parent. Only banked + or unbanked IRQs are supported at a time. If the interrupts are + banked then provide list of interrupts corresponding to each bank, else + provide the list of interrupts for each gpio. + minItems: 1 + maxItems: 100 + + ti,ngpio: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The number of GPIO pins supported consecutively. + minimum: 1 + + ti,davinci-gpio-unbanked: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The number of GPIOs that have an individual interrupt line to processor. + minimum: 0 + + clocks: + maxItems: 1 + + clock-names: + const: gpio + + interrupt-controller: true + + power-domains: + maxItems: 1 + + "#interrupt-cells": + const: 2 + +patternProperties: + "^(.+-hog(-[0-9]+)?)$": + type: object + + required: + - gpio-hog + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + - interrupts + - ti,ngpio + - ti,davinci-gpio-unbanked + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include<dt-bindings/interrupt-controller/arm-gic.h> + + gpio0: gpio@2603000 { + compatible = "ti,k2g-gpio", "ti,keystone-gpio"; + reg = <0x02603000 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <144>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k2g_clks 0x001b 0x0>; + clock-names = "gpio"; + }; + + - | + #include<dt-bindings/interrupt-controller/arm-gic.h> + + gpio1: gpio@260bf00 { + compatible = "ti,keystone-gpio"; + reg = <0x0260bf00 0x100>; + gpio-controller; + #gpio-cells = <2>; + /* HW Interrupts mapped to GPIO pins */ + interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 121 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 124 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 147 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkgpio>; + clock-names = "gpio"; + ti,ngpio = <32>; + ti,davinci-gpio-unbanked = <32>; + }; + + - | + wkup_gpio0: gpio0@42110000 { + compatible = "ti,am654-gpio", "ti,keystone-gpio"; + reg = <0x42110000 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&intr_wkup_gpio>; + interrupts = <60>, <61>, <62>, <63>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <56>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k3_clks 59 0>; + clock-names = "gpio"; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-omap.txt b/Documentation/devicetree/bindings/gpio/gpio-omap.txt deleted file mode 100644 index e57b2cb28f6c..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-omap.txt +++ /dev/null @@ -1,45 +0,0 @@ -OMAP GPIO controller bindings - -Required properties: -- compatible: - - "ti,omap2-gpio" for OMAP2 controllers - - "ti,omap3-gpio" for OMAP3 controllers - - "ti,omap4-gpio" for OMAP4 controllers -- reg : Physical base address of the controller and length of memory mapped - region. -- gpio-controller : Marks the device node as a GPIO controller. -- #gpio-cells : Should be two. - - first cell is the pin number - - second cell is used to specify optional parameters (unused) -- interrupt-controller: Mark the device node as an interrupt controller. -- #interrupt-cells : Should be 2. - The first cell is the GPIO number. - The second cell is used to specify flags: - bits[3:0] trigger type and level flags: - 1 = low-to-high edge triggered. - 2 = high-to-low edge triggered. - 4 = active high level-sensitive. - 8 = active low level-sensitive. -- interrupts : The interrupt the controller is rising as output when an - interrupt occures - -OMAP specific properties: -- ti,hwmods: Name of the hwmod associated to the GPIO: - "gpio<X>", <X> being the 1-based instance number - from the HW spec. -- ti,gpio-always-on: Indicates if a GPIO bank is always powered and - so will never lose its logic state. - - -Example: - -gpio0: gpio@44e07000 { - compatible = "ti,omap4-gpio"; - reg = <0x44e07000 0x1000>; - ti,hwmods = "gpio1"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <96>; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt deleted file mode 100644 index a482455a205b..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt +++ /dev/null @@ -1,69 +0,0 @@ -* PCF857x-compatible I/O expanders - -The PCF857x-compatible chips have "quasi-bidirectional" I/O lines that can be -driven high by a pull-up current source or driven low to ground. This combines -the direction and output level into a single bit per line, which can't be read -back. We can't actually know at initialization time whether a line is configured -(a) as output and driving the signal low/high, or (b) as input and reporting a -low/high value, without knowing the last value written since the chip came out -of reset (if any). The only reliable solution for setting up line direction is -thus to do it explicitly. - -Required Properties: - - - compatible: should be one of the following. - - "maxim,max7328": For the Maxim MAX7378 - - "maxim,max7329": For the Maxim MAX7329 - - "nxp,pca8574": For the NXP PCA8574 - - "nxp,pca8575": For the NXP PCA8575 - - "nxp,pca9670": For the NXP PCA9670 - - "nxp,pca9671": For the NXP PCA9671 - - "nxp,pca9672": For the NXP PCA9672 - - "nxp,pca9673": For the NXP PCA9673 - - "nxp,pca9674": For the NXP PCA9674 - - "nxp,pca9675": For the NXP PCA9675 - - "nxp,pcf8574": For the NXP PCF8574 - - "nxp,pcf8574a": For the NXP PCF8574A - - "nxp,pcf8575": For the NXP PCF8575 - - - reg: I2C slave address. - - - gpio-controller: Marks the device node as a gpio controller. - - #gpio-cells: Should be 2. The first cell is the GPIO number and the second - cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the - GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. - -Optional Properties: - - - lines-initial-states: Bitmask that specifies the initial state of each - line. When a bit is set to zero, the corresponding line will be initialized to - the input (pulled-up) state. When the bit is set to one, the line will be - initialized the low-level output state. If the property is not specified - all lines will be initialized to the input state. - - The I/O expander can detect input state changes, and thus optionally act as - an interrupt controller. When the expander interrupt line is connected all the - following properties must be set. For more information please see the - interrupt controller device tree bindings documentation available at - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt. - - - interrupt-controller: Identifies the node as an interrupt controller. - - #interrupt-cells: Number of cells to encode an interrupt source, shall be 2. - - interrupts: Interrupt specifier for the controllers interrupt. - - -Please refer to gpio.txt in this directory for details of the common GPIO -bindings used by client devices. - -Example: PCF8575 I/O expander node - - pcf8575: gpio@20 { - compatible = "nxp,pcf8575"; - reg = <0x20>; - interrupt-parent = <&irqpin2>; - interrupts = <3 0>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt deleted file mode 100644 index 78458adbf4b7..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt +++ /dev/null @@ -1,42 +0,0 @@ -Lantiq SoC Serial To Parallel (STP) GPIO controller - -The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a -peripheral controller used to drive external shift register cascades. At most -3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem -to drive the 2 LSBs of the cascade automatically. - - -Required properties: -- compatible : Should be "lantiq,gpio-stp-xway" -- reg : Address and length of the register set for the device -- #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify optional parameters (currently - unused). -- gpio-controller : Marks the device node as a gpio controller. - -Optional properties: -- lantiq,shadow : The default value that we shall assume as already set on the - shift register cascade. -- lantiq,groups : Set the 3 bit mask to select which of the 3 groups are enabled - in the shift register cascade. -- lantiq,dsl : The dsl core can control the 2 LSBs of the gpio cascade. This 2 bit - property can enable this feature. -- lantiq,phy1 : The gphy1 core can control 3 bits of the gpio cascade. -- lantiq,phy2 : The gphy2 core can control 3 bits of the gpio cascade. -- lantiq,rising : use rising instead of falling edge for the shift register - -Example: - -gpio1: stp@e100bb0 { - compatible = "lantiq,gpio-stp-xway"; - reg = <0xE100BB0 0x40>; - #gpio-cells = <2>; - gpio-controller; - - lantiq,shadow = <0xffff>; - lantiq,groups = <0x7>; - lantiq,dsl = <0x3>; - lantiq,phy1 = <0x7>; - lantiq,phy2 = <0x7>; - /* lantiq,rising; */ -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml new file mode 100644 index 000000000000..d565c4b63dbf --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-stp-xway.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq SoC Serial To Parallel (STP) GPIO controller + +description: | + The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a + peripheral controller used to drive external shift register cascades. At most + 3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem + and Ethernet PHYs to drive some bytes of the cascade automatically. + +maintainers: + - John Crispin <john@phrozen.org> + +properties: + $nodename: + pattern: "^gpio@[0-9a-f]+$" + + compatible: + const: lantiq,gpio-stp-xway + + reg: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + description: + The first cell is the pin number and the second cell is used to specify + consumer flags. + const: 2 + + lantiq,shadow: + description: + The default value that we shall assume as already set on the + shift register cascade. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x000000 + maximum: 0xffffff + + lantiq,groups: + description: + Set the 3 bit mask to select which of the 3 groups are enabled + in the shift register cascade. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0x7 + + lantiq,dsl: + description: + The dsl core can control the 2 LSBs of the gpio cascade. This 2 bit + property can enable this feature. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0x3 + + lantiq,rising: + description: + Use rising instead of falling edge for the shift register. + type: boolean + +patternProperties: + "^lantiq,phy[1-4]$": + description: + The gphy core can control 3 bits of the gpio cascade. In the xRX200 family + phy[1-2] are available, in xRX330 phy[1-3] and in XRX330 phy[1-4]. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0x7 + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + gpio@e100bb0 { + compatible = "lantiq,gpio-stp-xway"; + reg = <0xE100BB0 0x40>; + #gpio-cells = <2>; + gpio-controller; + + pinctrl-0 = <&stp_pins>; + pinctrl-names = "default"; + + lantiq,shadow = <0xffffff>; + lantiq,groups = <0x7>; + lantiq,dsl = <0x3>; + lantiq,phy1 = <0x7>; + lantiq,phy2 = <0x7>; + }; +... diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt deleted file mode 100644 index f693e82b4c0f..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt +++ /dev/null @@ -1,36 +0,0 @@ -Xilinx Zynq GPIO controller Device Tree Bindings -------------------------------------------- - -Required properties: -- #gpio-cells : Should be two - - First cell is the GPIO line number - - Second cell is used to specify optional - parameters (unused) -- compatible : Should be "xlnx,zynq-gpio-1.0" or - "xlnx,zynqmp-gpio-1.0" or "xlnx,versal-gpio-1.0 - or "xlnx,pmc-gpio-1.0 -- clocks : Clock specifier (see clock bindings for details) -- gpio-controller : Marks the device node as a GPIO controller. -- interrupts : Interrupt specifier (see interrupt bindings for - details) -- interrupt-controller : Marks the device node as an interrupt controller. -- #interrupt-cells : Should be 2. The first cell is the GPIO number. - The second cell bits[3:0] is used to specify trigger type and level flags: - 1 = low-to-high edge triggered. - 2 = high-to-low edge triggered. - 4 = active high level-sensitive. - 8 = active low level-sensitive. -- reg : Address and length of the register set for the device - -Example: - gpio@e000a000 { - #gpio-cells = <2>; - compatible = "xlnx,zynq-gpio-1.0"; - clocks = <&clkc 42>; - gpio-controller; - interrupt-parent = <&intc>; - interrupts = <0 20 4>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0xe000a000 0x1000>; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml new file mode 100644 index 000000000000..378da2649e66 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-zynq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Zynq GPIO controller Device Tree Bindings + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +properties: + compatible: + const: xlnx,zynq-gpio-1.0 + + reg: + maxItems: 1 + + "#gpio-cells": + const: 2 + + interrupts: + maxItems: 1 + + gpio-controller: true + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - "#gpio-cells" + - interrupts + - gpio-controller + - interrupt-controller + - "#interrupt-cells" + - clocks + +additionalProperties: false + +examples: + - | + gpio@e000a000 { + #gpio-cells = <2>; + compatible = "xlnx,zynq-gpio-1.0"; + clocks = <&clkc 42>; + gpio-controller; + interrupt-parent = <&intc>; + interrupts = <0 20 4>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xe000a000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/gpio/idt,32434-gpio.yaml b/Documentation/devicetree/bindings/gpio/idt,32434-gpio.yaml new file mode 100644 index 000000000000..d38de8144656 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/idt,32434-gpio.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/idt,32434-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IDT 79RC32434 GPIO controller + +maintainers: + - Thomas Bogendoerfer <tsbogend@alpha.franken.de> + +properties: + compatible: + const: idt,32434-gpio + + reg: + maxItems: 2 + + reg-names: + items: + - const: gpio + - const: pic + + gpio-controller: true + + "#gpio-cells": + const: 2 + + ngpios: + minimum: 1 + maximum: 32 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + gpio0: gpio@50004 { + compatible = "idt,32434-gpio"; + reg = <0x50004 0x10>, <0x38030 0x0c>; + reg-names = "gpio", "pic"; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + gpio-controller; + #gpio-cells = <2>; + + ngpios = <14>; + }; diff --git a/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml b/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml new file mode 100644 index 000000000000..f0ff66c4c74e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/nxp,pcf8575.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PCF857x-compatible I/O expanders + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: + The PCF857x-compatible chips have "quasi-bidirectional" I/O lines that can be + driven high by a pull-up current source or driven low to ground. This + combines the direction and output level into a single bit per line, which + can't be read back. We can't actually know at initialization time whether a + line is configured (a) as output and driving the signal low/high, or (b) as + input and reporting a low/high value, without knowing the last value written + since the chip came out of reset (if any). The only reliable solution for + setting up line direction is thus to do it explicitly. + +properties: + compatible: + enum: + - maxim,max7328 + - maxim,max7329 + - nxp,pca8574 + - nxp,pca8575 + - nxp,pca9670 + - nxp,pca9671 + - nxp,pca9672 + - nxp,pca9673 + - nxp,pca9674 + - nxp,pca9675 + - nxp,pcf8574 + - nxp,pcf8574a + - nxp,pcf8575 + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + description: + The first cell is the GPIO number and the second cell specifies GPIO + flags, as defined in <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH + and GPIO_ACTIVE_LOW flags are supported. + + lines-initial-states: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Bitmask that specifies the initial state of each line. + When a bit is set to zero, the corresponding line will be initialized to + the input (pulled-up) state. + When the bit is set to one, the line will be initialized to the + low-level output state. + If the property is not specified all lines will be initialized to the + input state. + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + wakeup-source: true + +patternProperties: + "^(.+-hog(-[0-9]+)?)$": + type: object + + required: + - gpio-hog + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pcf8575: gpio@20 { + compatible = "nxp,pcf8575"; + reg = <0x20>; + interrupt-parent = <&irqpin2>; + interrupts = <3 0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt deleted file mode 100644 index f9231df17c2b..000000000000 --- a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt +++ /dev/null @@ -1,32 +0,0 @@ -Rockchip RK3328 GRF (General Register Files) GPIO controller. - -In Rockchip RK3328, the output only GPIO_MUTE pin, originally for codec mute -control, can also be used for general purpose. It is manipulated by the -GRF_SOC_CON10 register in GRF. Aside from the GPIO_MUTE pin, the HDMI pins can -also be set in the same way. - -Currently this GPIO controller only supports the mute pin. If needed in the -future, the HDMI pins support can also be added. - -Required properties: -- compatible: Should contain "rockchip,rk3328-grf-gpio". -- gpio-controller: Marks the device node as a gpio controller. -- #gpio-cells: Should be 2. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = Active high, - 1 = Active low. - -Example: - - grf: syscon@ff100000 { - compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd"; - - grf_gpio: grf-gpio { - compatible = "rockchip,rk3328-grf-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - }; - -Note: The grf_gpio node should be declared as the child of the GRF (General -Register File) node. The GPIO_MUTE pin is referred to as <&grf_gpio 0>. diff --git a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml new file mode 100644 index 000000000000..d8cce73ea0ae --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/rockchip,rk3328-grf-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3328 General Register Files GPIO controller + +description: + The Rockchip RK3328 General Register File (GRF) outputs only the + GPIO_MUTE pin, originally for codec mute control, but it can also be used + for general purpose. It is manipulated by the GRF_SOC_CON10 register. + If needed in the future support for the HDMI pins can also be added. + The GPIO node should be declared as the child of the GRF node. + + The GPIO_MUTE pin is referred to in the format + + <&grf_gpio 0 GPIO_ACTIVE_LOW> + + The first cell is the pin number and + the second cell is used to specify the GPIO polarity + 0 = Active high + 1 = Active low + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + const: rockchip,rk3328-grf-gpio + + gpio-controller: true + + "#gpio-cells": + const: 2 + +required: + - compatible + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + grf_gpio: gpio { + compatible = "rockchip,rk3328-grf-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml b/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml new file mode 100644 index 000000000000..7087e4a5013f --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/ti,omap-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OMAP GPIO controller bindings + +maintainers: + - Grygorii Strashko <grygorii.strashko@ti.com> + +description: | + The general-purpose interface combines general-purpose input/output (GPIO) banks. + Each GPIO banks provides up to 32 dedicated general-purpose pins with input + and output capabilities; interrupt generation in active mode and wake-up + request generation in idle mode upon the detection of external events. + +properties: + compatible: + oneOf: + - enum: + - ti,omap2-gpio + - ti,omap3-gpio + - ti,omap4-gpio + - items: + - const: ti,am4372-gpio + - const: ti,omap4-gpio + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + maxItems: 1 + + gpio-ranges: true + + gpio-line-names: + minItems: 1 + maxItems: 32 + + ti,gpio-always-on: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates if a GPIO bank is always powered and will never lose its logic state. + + ti,hwmods: + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + description: + Name of the hwmod associated with the GPIO. Needed on some legacy OMAP + SoCs which have not been converted to the ti,sysc interconnect hierarachy. + + ti,no-reset-on-init: + $ref: /schemas/types.yaml#/definitions/flag + deprecated: true + description: + Do not reset on init. Used with ti,hwmods on some legacy OMAP SoCs which + have not been converted to the ti,sysc interconnect hierarachy. + +patternProperties: + "^(.+-hog(-[0-9]+)?)$": + type: object + + required: + - gpio-hog + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + - interrupt-controller + - "#interrupt-cells" + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + gpio0: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <96>; + ti,gpio-always-on; + + ls-buf-en-hog { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LS_BUF_EN"; + }; + }; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index 894ba217ab32..0f73f436bea7 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -17,6 +17,7 @@ properties: items: - enum: - amlogic,meson-g12a-mali + - mediatek,mt8183-mali - realtek,rtd1619-mali - rockchip,px30-mali - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable @@ -41,10 +42,13 @@ properties: mali-supply: true + sram-supply: true + operating-points-v2: true power-domains: - maxItems: 1 + minItems: 1 + maxItems: 3 resets: maxItems: 2 @@ -89,6 +93,30 @@ allOf: then: required: - resets + - if: + properties: + compatible: + contains: + const: mediatek,mt8183-mali + then: + properties: + power-domains: + minItems: 3 + power-domain-names: + items: + - const: core0 + - const: core1 + - const: core2 + + required: + - sram-supply + - power-domains + - power-domain-names + else: + properties: + power-domains: + maxItems: 1 + sram-supply: false examples: - | diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml index 9d72264fa90a..e6485f7b046f 100644 --- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml +++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml @@ -34,7 +34,6 @@ properties: - enum: [ bridge, gca ] - enum: [ bridge, gca ] minItems: 2 - maxItems: 4 interrupts: items: diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml index 3ed172629974..93e7244cdc0e 100644 --- a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml +++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml @@ -36,7 +36,6 @@ properties: - description: AHB/slave interface clock (only required if GPU can gate slave interface independently) minItems: 1 - maxItems: 4 clock-names: items: diff --git a/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml new file mode 100644 index 000000000000..10e5a53e447b --- /dev/null +++ b/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwlock/allwinner,sun6i-a31-hwspinlock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SUN6I hardware spinlock driver for Allwinner sun6i compatible SoCs + +maintainers: + - Wilken Gottwalt <wilken.gottwalt@posteo.net> + +description: + The hardware unit provides semaphores between the ARM cores and the embedded + companion core on the SoC. + +properties: + compatible: + const: allwinner,sun6i-a31-hwspinlock + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun8i-a23-a33-ccu.h> + #include <dt-bindings/reset/sun8i-a23-a33-ccu.h> + + hwlock@1c18000 { + compatible = "allwinner,sun6i-a31-hwspinlock"; + reg = <0x01c18000 0x1000>; + clocks = <&ccu CLK_BUS_SPINLOCK>; + resets = <&ccu RST_BUS_SPINLOCK>; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml index 96eed5cc7841..72980d083c21 100644 --- a/Documentation/devicetree/bindings/hwmon/lm75.yaml +++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml @@ -30,6 +30,7 @@ properties: - st,stds75 - st,stlm75 - microchip,tcn75 + - ti,tmp1075 - ti,tmp100 - ti,tmp101 - ti,tmp105 diff --git a/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml index 33ee575bb09d..926be9a29044 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml @@ -49,7 +49,7 @@ examples: #size-cells = <0>; adc@48 { - comatible = "ti,ads7828"; + compatible = "ti,ads7828"; reg = <0x48>; vref-supply = <&vref>; ti,differential-input; diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml new file mode 100644 index 000000000000..ea643e6c3ef5 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device Tree Bindings + +maintainers: + - Rayn Chen <rayn_chen@aspeedtech.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + enum: + - aspeed,ast2400-i2c-bus + - aspeed,ast2500-i2c-bus + - aspeed,ast2600-i2c-bus + + reg: + minItems: 1 + items: + - description: address offset and range of bus + - description: address offset and range of bus buffer + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: + root clock of bus, should reference the APB + clock in the second cell + + resets: + maxItems: 1 + + bus-frequency: + minimum: 500 + maximum: 4000000 + default: 100000 + description: frequency of the bus clock in Hz defaults to 100 kHz when not + specified + + multi-master: + type: boolean + description: + states that there is another master active on this bus + +required: + - reg + - compatible + - clocks + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/aspeed-clock.h> + i2c0: i2c-bus@40 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + compatible = "aspeed,ast2500-i2c-bus"; + reg = <0x40 0x40>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; + bus-frequency = <100000>; + interrupts = <0>; + interrupt-parent = <&i2c_ic>; + }; diff --git a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml index edbca2476128..7070c04469ed 100644 --- a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml @@ -21,7 +21,6 @@ properties: reg: minItems: 1 - maxItems: 2 items: - description: BSC register range - description: Auto-I2C register range diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt deleted file mode 100644 index b47f6ccb196a..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt +++ /dev/null @@ -1,49 +0,0 @@ -Device tree configuration for the I2C busses on the AST24XX, AST25XX, and AST26XX SoCs. - -Required Properties: -- #address-cells : should be 1 -- #size-cells : should be 0 -- reg : address offset and range of bus -- compatible : should be "aspeed,ast2400-i2c-bus" - or "aspeed,ast2500-i2c-bus" - or "aspeed,ast2600-i2c-bus" -- clocks : root clock of bus, should reference the APB - clock in the second cell -- resets : phandle to reset controller with the reset number in - the second cell -- interrupts : interrupt number - -Optional Properties: -- bus-frequency : frequency of the bus clock in Hz defaults to 100 kHz when not - specified -- multi-master : states that there is another master active on this bus. - -Example: - -i2c { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x1e78a000 0x1000>; - - i2c_ic: interrupt-controller@0 { - #interrupt-cells = <1>; - compatible = "aspeed,ast2400-i2c-ic"; - reg = <0x0 0x40>; - interrupts = <12>; - interrupt-controller; - }; - - i2c0: i2c-bus@40 { - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - reg = <0x40 0x40>; - compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&syscon ASPEED_CLK_APB>; - resets = <&syscon ASPEED_RESET_I2C>; - bus-frequency = <100000>; - interrupts = <0>; - interrupt-parent = <&i2c_ic>; - }; -}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt index b745f3706120..6590501c53d4 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt @@ -8,7 +8,7 @@ Required properties: - reg : Offset and length of the register set for the device - clocks: I2C functional clock phandle. For 66AK2G this property should be set per binding, - Documentation/devicetree/bindings/clock/ti,sci-clk.txt + Documentation/devicetree/bindings/clock/ti,sci-clk.yaml SoC-specific Required Properties: @@ -17,7 +17,7 @@ The following are mandatory properties for Keystone 2 66AK2G SoCs only: - power-domains: Should contain a phandle to a PM domain provider node and an args specifier containing the I2C device id value. This property is as per the binding, - Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml Recommended properties : - interrupts : standard interrupt property. diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt index 81b5d55086fa..86b2e433a969 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt @@ -27,7 +27,7 @@ Required properties: - i2c-bus-name: The name of this bus. Also needed as pinctrl-name for the I2C parents. -Furthermore, I2C mux properties and child nodes. See i2c-mux.txt in this +Furthermore, I2C mux properties and child nodes. See i2c-mux.yaml in this directory. Example: diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml index 7b553d559c83..98c6fcf7bf26 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml @@ -46,6 +46,13 @@ properties: description: | I2C bus timeout in microseconds + fsl,i2c-erratum-a004447: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Indicates the presence of QorIQ erratum A-004447, which + says that the standard i2c recovery scheme mechanism does + not work and an alternate implementation is needed. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt index 7f0194fdd0cc..5ea216ae7084 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt @@ -15,6 +15,7 @@ Required properties: "mediatek,mt8173-i2c": for MediaTek MT8173 "mediatek,mt8183-i2c": for MediaTek MT8183 "mediatek,mt8192-i2c": for MediaTek MT8192 + "mediatek,mt8195-i2c", "mediatek,mt8192-i2c": for MediaTek MT8195 "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516 - reg: physical base address of the controller and dma base, length of memory mapped region. @@ -32,6 +33,7 @@ Optional properties: - mediatek,have-pmic: platform can control i2c form special pmic side. Only mt6589 and mt8135 support this feature. - mediatek,use-push-pull: IO config use push-pull mode. + - vbus-supply: phandle to the regulator that provides power to SCL/SDA. Example: diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt index 21da3ecbb370..d4cf10582a26 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt @@ -22,8 +22,8 @@ Required properties: - i2c-parent: The phandle of the I2C bus that this multiplexer's master-side port is connected to. - mux-gpios: list of gpios used to control the muxer -* Standard I2C mux properties. See i2c-mux.txt in this directory. -* I2C child bus nodes. See i2c-mux.txt in this directory. +* Standard I2C mux properties. See i2c-mux.yaml in this directory. +* I2C child bus nodes. See i2c-mux.yaml in this directory. Optional properties: - idle-state: value to set the muxer to when idle. When no value is @@ -62,7 +62,6 @@ Example: reg = <0x3c>; pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7 1>; - reset-active-low; }; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt deleted file mode 100644 index 8b444b94e92f..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt +++ /dev/null @@ -1,99 +0,0 @@ -General Purpose I2C Bus Mux - -This binding describes an I2C bus multiplexer that uses a mux controller -from the mux subsystem to route the I2C signals. - - .-----. .-----. - | dev | | dev | - .------------. '-----' '-----' - | SoC | | | - | | .--------+--------' - | .------. | .------+ child bus A, on MUX value set to 0 - | | I2C |-|--| Mux | - | '------' | '--+---+ child bus B, on MUX value set to 1 - | .------. | | '----------+--------+--------. - | | MUX- | | | | | | - | | Ctrl |-|-----+ .-----. .-----. .-----. - | '------' | | dev | | dev | | dev | - '------------' '-----' '-----' '-----' - -Required properties: -- compatible: i2c-mux -- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side - port is connected to. -- mux-controls: The phandle of the mux controller to use for operating the - mux. -* Standard I2C mux properties. See i2c-mux.txt in this directory. -* I2C child bus nodes. See i2c-mux.txt in this directory. The sub-bus number - is also the mux-controller state described in ../mux/mux-controller.txt - -Optional properties: -- mux-locked: If present, explicitly allow unrelated I2C transactions on the - parent I2C adapter at these times: - + during setup of the multiplexer - + between setup of the multiplexer and the child bus I2C transaction - + between the child bus I2C transaction and releasing of the multiplexer - + during releasing of the multiplexer - However, I2C transactions to devices behind all I2C multiplexers connected - to the same parent adapter that this multiplexer is connected to are blocked - for the full duration of the complete multiplexed I2C transaction (i.e. - including the times covered by the above list). - If mux-locked is not present, the multiplexer is assumed to be parent-locked. - This means that no unrelated I2C transactions are allowed on the parent I2C - adapter for the complete multiplexed I2C transaction. - The properties of mux-locked and parent-locked multiplexers are discussed - in more detail in Documentation/i2c/i2c-topology.rst. - -For each i2c child node, an I2C child bus will be created. They will -be numbered based on their order in the device tree. - -Whenever an access is made to a device on a child bus, the value set -in the relevant node's reg property will be set as the state in the -mux controller. - -Example: - mux: mux-controller { - compatible = "gpio-mux"; - #mux-control-cells = <0>; - - mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, - <&pioA 1 GPIO_ACTIVE_HIGH>; - }; - - i2c-mux { - compatible = "i2c-mux"; - mux-locked; - i2c-parent = <&i2c1>; - - mux-controls = <&mux>; - - #address-cells = <1>; - #size-cells = <0>; - - i2c@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - ssd1307: oled@3c { - compatible = "solomon,ssd1307fb-i2c"; - reg = <0x3c>; - pwms = <&pwm 4 3000>; - reset-gpios = <&gpio2 7 1>; - reset-active-low; - }; - }; - - i2c@3 { - reg = <3>; - #address-cells = <1>; - #size-cells = <0>; - - pca9555: pca9555@20 { - compatible = "nxp,pca9555"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x20>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml new file mode 100644 index 000000000000..9b0603a72f40 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mux-gpmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: General Purpose I2C Bus Mux + +maintainers: + - Peter Rosin <peda@axentia.se> + +description: |+ + This binding describes an I2C bus multiplexer that uses a mux controller + from the mux subsystem to route the I2C signals. + + .-----. .-----. + | dev | | dev | + .------------. '-----' '-----' + | SoC | | | + | | .--------+--------' + | .------. | .------+ child bus A, on MUX value set to 0 + | | I2C |-|--| Mux | + | '------' | '--+---+ child bus B, on MUX value set to 1 + | .------. | | '----------+--------+--------. + | | MUX- | | | | | | + | | Ctrl |-|-----+ .-----. .-----. .-----. + | '------' | | dev | | dev | | dev | + '------------' '-----' '-----' '-----' + + + +allOf: + - $ref: /schemas/i2c/i2c-mux.yaml# + +properties: + compatible: + const: i2c-mux + + i2c-parent: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the I2C bus that this multiplexer's master-side port is + connected to. + + mux-controls: + maxItems: 1 + description: + The mux-controller states are the I2C sub-bus numbers. + + mux-locked: + type: boolean + description: | + Explicitly allow unrelated I2C transactions on the parent I2C adapter at + these times: + - during setup of the multiplexer + - between setup of the multiplexer and the child bus I2C transaction + - between the child bus I2C transaction and releasing of the multiplexer + - during releasing of the multiplexer + + However, I2C transactions to devices behind all I2C multiplexers connected + to the same parent adapter that this multiplexer is connected to are blocked + for the full duration of the complete multiplexed I2C transaction (i.e. + including the times covered by the above list). + If mux-locked is not present, the multiplexer is assumed to be parent-locked. + This means that no unrelated I2C transactions are allowed on the parent I2C + adapter for the complete multiplexed I2C transaction. + The properties of mux-locked and parent-locked multiplexers are discussed + in more detail in Documentation/i2c/i2c-topology.rst. + +required: + - compatible + - i2c-parent + - mux-controls + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, + <&pioA 1 GPIO_ACTIVE_HIGH>; + }; + + i2c-mux { + compatible = "i2c-mux"; + mux-locked; + i2c-parent = <&i2c1>; + + mux-controls = <&mux>; + + #address-cells = <1>; + #size-cells = <0>; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + gpio@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + gpio@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt index 8b1e49cdce3f..29c4550c9782 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt @@ -8,8 +8,8 @@ Required Properties: The following required properties are defined externally: - - Standard I2C mux properties. See i2c-mux.txt in this directory. - - I2C child bus nodes. See i2c-mux.txt in this directory. + - Standard I2C mux properties. See i2c-mux.yaml in this directory. + - I2C child bus nodes. See i2c-mux.yaml in this directory. Optional Properties: diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt deleted file mode 100644 index 7abda506b828..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt +++ /dev/null @@ -1,74 +0,0 @@ -* NXP PCA954x I2C bus switch - -The driver supports NXP PCA954x and PCA984x I2C mux/switch devices. - -Required Properties: - - - compatible: Must contain one of the following. - "nxp,pca9540", - "nxp,pca9542", - "nxp,pca9543", - "nxp,pca9544", - "nxp,pca9545", - "nxp,pca9546", "nxp,pca9846", - "nxp,pca9547", "nxp,pca9847", - "nxp,pca9548", "nxp,pca9848", - "nxp,pca9849" - - - reg: The I2C address of the device. - - The following required properties are defined externally: - - - Standard I2C mux properties. See i2c-mux.txt in this directory. - - I2C child bus nodes. See i2c-mux.txt in this directory. - -Optional Properties: - - - reset-gpios: Reference to the GPIO connected to the reset input. - - idle-state: if present, overrides i2c-mux-idle-disconnect, - Please refer to Documentation/devicetree/bindings/mux/mux-controller.txt - - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all - children in idle state. This is necessary for example, if there are several - multiplexers on the bus and the devices behind them use same I2C addresses. - - interrupts: Interrupt mapping for IRQ. - - interrupt-controller: Marks the device node as an interrupt controller. - - #interrupt-cells : Should be two. - - first cell is the pin number - - second cell is used to specify flags. - See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -Example: - - i2c-switch@74 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x74>; - - interrupt-parent = <&ipic>; - interrupts = <17 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - eeprom@54 { - compatible = "atmel,24c08"; - reg = <0x54>; - }; - }; - - i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - - rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml new file mode 100644 index 000000000000..9f1726d0356b --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PCA954x I2C bus switch + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: + The binding supports NXP PCA954x and PCA984x I2C mux/switch devices. + +allOf: + - $ref: /schemas/i2c/i2c-mux.yaml# + +properties: + compatible: + oneOf: + - enum: + - nxp,pca9540 + - nxp,pca9542 + - nxp,pca9543 + - nxp,pca9544 + - nxp,pca9545 + - nxp,pca9546 + - nxp,pca9547 + - nxp,pca9548 + - nxp,pca9846 + - nxp,pca9847 + - nxp,pca9848 + - nxp,pca9849 + - items: + - const: nxp,pca9646 + - const: nxp,pca9546 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + + interrupt-controller: true + + reset-gpios: + maxItems: 1 + + i2c-mux-idle-disconnect: + type: boolean + description: Forces mux to disconnect all children in idle state. This is + necessary for example, if there are several multiplexers on the bus and + the devices behind them use same I2C addresses. + + idle-state: + description: if present, overrides i2c-mux-idle-disconnect + $ref: /schemas/mux/mux-controller.yaml#/properties/idle-state + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2c-mux@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + interrupt-parent = <&ipic>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@54 { + compatible = "atmel,24c08"; + reg = <0x54>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt index 33119a98e144..997a287ed3f6 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt @@ -28,9 +28,9 @@ Also required are: * Standard pinctrl properties that specify the pin mux state for each child bus. See ../pinctrl/pinctrl-bindings.txt. -* Standard I2C mux properties. See i2c-mux.txt in this directory. +* Standard I2C mux properties. See i2c-mux.yaml in this directory. -* I2C child bus nodes. See i2c-mux.txt in this directory. +* I2C child bus nodes. See i2c-mux.yaml in this directory. For each named state defined in the pinctrl-names property, an I2C child bus will be created. I2C child bus numbers are assigned based on the index into diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt index de00d7fc450b..b9d9755e4172 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt @@ -7,8 +7,8 @@ Required properties: - compatible: i2c-mux-reg - i2c-parent: The phandle of the I2C bus that this multiplexer's master-side port is connected to. -* Standard I2C mux properties. See i2c-mux.txt in this directory. -* I2C child bus nodes. See i2c-mux.txt in this directory. +* Standard I2C mux properties. See i2c-mux.yaml in this directory. +* I2C child bus nodes. See i2c-mux.yaml in this directory. Optional properties: - reg: this pair of <offset size> specifies the register to control the mux. diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux.txt deleted file mode 100644 index b38f58a1c878..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-mux.txt +++ /dev/null @@ -1,73 +0,0 @@ -Common i2c bus multiplexer/switch properties. - -An i2c bus multiplexer/switch will have several child busses that are -numbered uniquely in a device dependent manner. The nodes for an i2c bus -multiplexer/switch will have one child node for each child bus. - -Optional properties: -- #address-cells = <1>; - This property is required if the i2c-mux child node does not exist. - -- #size-cells = <0>; - This property is required if the i2c-mux child node does not exist. - -- i2c-mux - For i2c multiplexers/switches that have child nodes that are a mixture - of both i2c child busses and other child nodes, the 'i2c-mux' subnode - can be used for populating the i2c child busses. If an 'i2c-mux' - subnode is present, only subnodes of this will be considered as i2c - child busses. - -Required properties for the i2c-mux child node: -- #address-cells = <1>; -- #size-cells = <0>; - -Required properties for i2c child bus nodes: -- #address-cells = <1>; -- #size-cells = <0>; -- reg : The sub-bus number. - -Optional properties for i2c child bus nodes: -- Other properties specific to the multiplexer/switch hardware. -- Child nodes conforming to i2c bus binding - - -Example : - - /* - An NXP pca9548 8 channel I2C multiplexer at address 0x70 - with two NXP pca8574 GPIO expanders attached, one each to - ports 3 and 4. - */ - - mux@70 { - compatible = "nxp,pca9548"; - reg = <0x70>; - #address-cells = <1>; - #size-cells = <0>; - - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - gpio1: gpio@38 { - compatible = "nxp,pca8574"; - reg = <0x38>; - #gpio-cells = <2>; - gpio-controller; - }; - }; - i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - - gpio2: gpio@38 { - compatible = "nxp,pca8574"; - reg = <0x38>; - #gpio-cells = <2>; - gpio-controller; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml new file mode 100644 index 000000000000..24cac36037f5 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common i2c bus multiplexer/switch properties. + +maintainers: + - Peter Rosin <peda@axentia.se> + +description: |+ + An i2c bus multiplexer/switch will have several child busses that are numbered + uniquely in a device dependent manner. The nodes for an i2c bus + multiplexer/switch will have one child node for each child bus. + + For i2c multiplexers/switches that have child nodes that are a mixture of both + i2c child busses and other child nodes, the 'i2c-mux' subnode can be used for + populating the i2c child busses. If an 'i2c-mux' subnode is present, only + subnodes of this will be considered as i2c child busses. + +properties: + $nodename: + pattern: '^(i2c-?)?mux' + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^i2c@[0-9a-f]+$': + $ref: /schemas/i2c/i2c-controller.yaml + unevaluatedProperties: false + + properties: + reg: + description: The mux selector sub-bus number for the child I2C bus. + maxItems: 1 + +additionalProperties: true + +examples: + - | + /* + * An NXP pca9548 8 channel I2C multiplexer at address 0x70 + * with two NXP pca8574 GPIO expanders attached, one each to + * ports 3 and 4. + */ + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + gpio@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + gpio@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/i2c-omap.txt b/Documentation/devicetree/bindings/i2c/i2c-omap.txt deleted file mode 100644 index a425b91af48f..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-omap.txt +++ /dev/null @@ -1,37 +0,0 @@ -I2C for OMAP platforms - -Required properties : -- compatible : Must be - "ti,omap2420-i2c" for OMAP2420 SoCs - "ti,omap2430-i2c" for OMAP2430 SoCs - "ti,omap3-i2c" for OMAP3 SoCs - "ti,omap4-i2c" for OMAP4+ SoCs - "ti,am654-i2c", "ti,omap4-i2c" for AM654 SoCs - "ti,j721e-i2c", "ti,omap4-i2c" for J721E SoCs - "ti,am64-i2c", "ti,omap4-i2c" for AM64 SoCs -- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based) -- #address-cells = <1>; -- #size-cells = <0>; - -Recommended properties : -- clock-frequency : Desired I2C bus clock frequency in Hz. Otherwise - the default 100 kHz frequency will be used. - -Optional properties: -- Child nodes conforming to i2c bus binding - -Note: Current implementation will fetch base address, irq and dma -from omap hwmod data base during device registration. -Future plan is to migrate hwmod data base contents into device tree -blob so that, all the required data will be used from device tree dts -file. - -Examples : - -i2c1: i2c@0 { - compatible = "ti,omap3-i2c"; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c1"; - clock-frequency = <400000>; -}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt index 569b16248514..1ff6f8487a2d 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt @@ -71,7 +71,7 @@ This is an example which is used on FalconFalls: /* This I2C controller has one gpio controller */ gpio@26 { #gpio-cells = <2>; - compatible = "ti,pcf8575"; + compatible = "nxp,pcf8575"; reg = <0x26>; gpio-controller; }; @@ -85,7 +85,7 @@ This is an example which is used on FalconFalls: gpio@26 { #gpio-cells = <2>; - compatible = "ti,pcf8575"; + compatible = "nxp,pcf8575"; reg = <0x26>; gpio-controller; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt index c6668b7c66e6..7b9fc0c22eaf 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt @@ -9,6 +9,7 @@ PROPERTIES: "qcom,msm8916-cci" "qcom,msm8996-cci" "qcom,sdm845-cci" + "qcom,sm8250-cci" - reg Usage: required @@ -41,8 +42,8 @@ PROPERTIES: SUBNODES: -The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8996 and -sdm845), described as subdevices named "i2c-bus@0" and "i2c-bus@1". +The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8996, +sdm845 and sm8250), described as subdevices named "i2c-bus@0" and "i2c-bus@1". PROPERTIES: diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml index 7f254d79558c..5339dd4fc370 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml @@ -36,6 +36,7 @@ properties: - rockchip,px30-i2c - rockchip,rk3308-i2c - rockchip,rk3328-i2c + - rockchip,rk3568-i2c - const: rockchip,rk3399-i2c reg: diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index df41f72afc87..b864916e087f 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -89,8 +89,11 @@ wants to support one of the below features, it should adapt these bindings. - smbus states that additional SMBus restrictions and features apply to this bus. - Examples of features are SMBusHostNotify and SMBusAlert. Examples of - restrictions are more reserved addresses and timeout definitions. + An example of feature is SMBusHostNotify. Examples of restrictions are + more reserved addresses and timeout definitions. + +- smbus-alert + states that the optional SMBus-Alert feature apply to this bus. Required properties (per child device) -------------------------------------- diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml index eb72dd571def..f771c09aabfc 100644 --- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml @@ -43,14 +43,12 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: Reference clock for the I2C bus - description: Bus clock (Only for Armada 7K/8K) clock-names: minItems: 1 - maxItems: 2 items: - const: core - const: reg diff --git a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml index d2b401d062b9..93198d5d43a6 100644 --- a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml +++ b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml @@ -20,7 +20,6 @@ properties: reg: minItems: 3 - maxItems: 4 items: - description: Smbus block registers - description: Cause master registers diff --git a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt deleted file mode 100644 index 5762d2d1ab9c..000000000000 --- a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt +++ /dev/null @@ -1,67 +0,0 @@ -I2C for R-Car platforms - -Required properties: -- compatible: - "renesas,i2c-r8a7742" if the device is a part of a R8A7742 SoC. - "renesas,i2c-r8a7743" if the device is a part of a R8A7743 SoC. - "renesas,i2c-r8a7744" if the device is a part of a R8A7744 SoC. - "renesas,i2c-r8a7745" if the device is a part of a R8A7745 SoC. - "renesas,i2c-r8a77470" if the device is a part of a R8A77470 SoC. - "renesas,i2c-r8a774a1" if the device is a part of a R8A774A1 SoC. - "renesas,i2c-r8a774b1" if the device is a part of a R8A774B1 SoC. - "renesas,i2c-r8a774c0" if the device is a part of a R8A774C0 SoC. - "renesas,i2c-r8a774e1" if the device is a part of a R8A774E1 SoC. - "renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC. - "renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC. - "renesas,i2c-r8a7790" if the device is a part of a R8A7790 SoC. - "renesas,i2c-r8a7791" if the device is a part of a R8A7791 SoC. - "renesas,i2c-r8a7792" if the device is a part of a R8A7792 SoC. - "renesas,i2c-r8a7793" if the device is a part of a R8A7793 SoC. - "renesas,i2c-r8a7794" if the device is a part of a R8A7794 SoC. - "renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC. - "renesas,i2c-r8a7796" if the device is a part of a R8A77960 SoC. - "renesas,i2c-r8a77961" if the device is a part of a R8A77961 SoC. - "renesas,i2c-r8a77965" if the device is a part of a R8A77965 SoC. - "renesas,i2c-r8a77970" if the device is a part of a R8A77970 SoC. - "renesas,i2c-r8a77980" if the device is a part of a R8A77980 SoC. - "renesas,i2c-r8a77990" if the device is a part of a R8A77990 SoC. - "renesas,i2c-r8a77995" if the device is a part of a R8A77995 SoC. - "renesas,i2c-r8a779a0" if the device is a part of a R8A779A0 SoC. - "renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device. - "renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible - device. - "renesas,rcar-gen3-i2c" for a generic R-Car Gen3 or RZ/G2 compatible - device. - "renesas,i2c-rcar" (deprecated) - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first followed - by the generic version. - -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: interrupt specifier. - -Optional properties: -- clock-frequency: desired I2C bus clock frequency in Hz. The absence of this - property indicates the default frequency 100 kHz. -- clocks: clock specifier. -- dmas: Must contain a list of two references to DMA specifiers, one for - transmission, and one for reception. -- dma-names: Must contain a list of two DMA names, "tx" and "rx". - -- i2c-scl-falling-time-ns: see i2c.txt -- i2c-scl-internal-delay-ns: see i2c.txt -- i2c-scl-rising-time-ns: see i2c.txt - -Examples : - -i2c0: i2c@e6508000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6508000 0 0x40>; - interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp9_clks R8A7791_CLK_I2C0>; - clock-frequency = <400000>; -}; diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.txt b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.txt deleted file mode 100644 index 5ed1ea1c7e14..000000000000 --- a/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.txt +++ /dev/null @@ -1,22 +0,0 @@ -Device tree configuration for Renesas EMEV2 IIC controller - -Required properties: -- compatible : "renesas,iic-emev2" -- reg : address start and address range size of device -- interrupts : specifier for the IIC controller interrupt -- clocks : phandle to the IP core SCLK -- clock-names : must be "sclk" -- #address-cells : should be <1> -- #size-cells : should be <0> - -Example: - - iic0: i2c@e0070000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,iic-emev2"; - reg = <0xe0070000 0x28>; - interrupts = <0 32 IRQ_TYPE_EDGE_RISING>; - clocks = <&iic0_sclk>; - clock-names = "sclk"; - }; diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml new file mode 100644 index 000000000000..17c1102562be --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/renesas,iic-emev2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas EMMA Mobile EV2 IIC Interface + +maintainers: + - Wolfram Sang <wsa+renesas@sang-engineering.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: renesas,iic-emev2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: sclk + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - '#address-cells' + - '#size-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + iic0: i2c@e0070000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-emev2"; + reg = <0xe0070000 0x28>; + interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; + clocks = <&iic0_sclk>; + clock-names = "sclk"; + }; diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic.txt b/Documentation/devicetree/bindings/i2c/renesas,iic.txt deleted file mode 100644 index 93d412832e66..000000000000 --- a/Documentation/devicetree/bindings/i2c/renesas,iic.txt +++ /dev/null @@ -1,72 +0,0 @@ -Device tree configuration for Renesas IIC (sh_mobile) driver - -Required properties: -- compatible : - - "renesas,iic-r8a73a4" (R-Mobile APE6) - - "renesas,iic-r8a7740" (R-Mobile A1) - - "renesas,iic-r8a7742" (RZ/G1H) - - "renesas,iic-r8a7743" (RZ/G1M) - - "renesas,iic-r8a7744" (RZ/G1N) - - "renesas,iic-r8a7745" (RZ/G1E) - - "renesas,iic-r8a774a1" (RZ/G2M) - - "renesas,iic-r8a774b1" (RZ/G2N) - - "renesas,iic-r8a774c0" (RZ/G2E) - - "renesas,iic-r8a774e1" (RZ/G2H) - - "renesas,iic-r8a7790" (R-Car H2) - - "renesas,iic-r8a7791" (R-Car M2-W) - - "renesas,iic-r8a7792" (R-Car V2H) - - "renesas,iic-r8a7793" (R-Car M2-N) - - "renesas,iic-r8a7794" (R-Car E2) - - "renesas,iic-r8a7795" (R-Car H3) - - "renesas,iic-r8a7796" (R-Car M3-W) - - "renesas,iic-r8a77961" (R-Car M3-W+) - - "renesas,iic-r8a77965" (R-Car M3-N) - - "renesas,iic-r8a77990" (R-Car E3) - - "renesas,iic-sh73a0" (SH-Mobile AG5) - - "renesas,rcar-gen2-iic" (generic R-Car Gen2 or RZ/G1 - compatible device) - - "renesas,rcar-gen3-iic" (generic R-Car Gen3 or RZ/G2 - compatible device) - - "renesas,rmobile-iic" (generic device) - - When compatible with a generic R-Car version, nodes - must list the SoC-specific version corresponding to - the platform first followed by the generic R-Car - version. - - When compatible with "renesas,rmobile-iic" it should - be the last compatibility string listed. - - The r8a77990 (R-Car E3) and r8a774c0 (RZ/G2E) - controllers are not considered compatible with - "renesas,rcar-gen3-iic" or "renesas,rmobile-iic" - due to the absence of automatic transmission registers. - -- reg : address start and address range size of device -- interrupts : interrupt of device -- clocks : clock for device -- #address-cells : should be <1> -- #size-cells : should be <0> - -Optional properties: -- clock-frequency : frequency of bus clock in Hz. Default 100kHz if unset. -- dmas : Must contain a list of two references to DMA - specifiers, one for transmission, and one for - reception. -- dma-names : Must contain a list of two DMA names, "tx" and "rx". - - -Pinctrl properties might be needed, too. See there. - -Example: - - iic0: i2c@e6500000 { - compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; - reg = <0 0xe6500000 0 0x425>; - interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp3_clks R8A7790_CLK_IIC0>; - clock-frequency = <400000>; - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml new file mode 100644 index 000000000000..052aad44e781 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/renesas,rcar-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car I2C Controller + +maintainers: + - Wolfram Sang <wsa+renesas@sang-engineering.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,i2c-r8a7778 # R-Car M1A + - renesas,i2c-r8a7779 # R-Car H1 + - const: renesas,rcar-gen1-i2c # R-Car Gen1 + + - items: + - enum: + - renesas,i2c-r8a7742 # RZ/G1H + - renesas,i2c-r8a7743 # RZ/G1M + - renesas,i2c-r8a7744 # RZ/G1N + - renesas,i2c-r8a7745 # RZ/G1E + - renesas,i2c-r8a77470 # RZ/G1C + - renesas,i2c-r8a7790 # R-Car H2 + - renesas,i2c-r8a7791 # R-Car M2-W + - renesas,i2c-r8a7792 # R-Car V2H + - renesas,i2c-r8a7793 # R-Car M2-N + - renesas,i2c-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-i2c # R-Car Gen2 and RZ/G1 + + - items: + - enum: + - renesas,i2c-r8a774a1 # RZ/G2M + - renesas,i2c-r8a774b1 # RZ/G2N + - renesas,i2c-r8a774c0 # RZ/G2E + - renesas,i2c-r8a774e1 # RZ/G2H + - renesas,i2c-r8a7795 # R-Car H3 + - renesas,i2c-r8a7796 # R-Car M3-W + - renesas,i2c-r8a77961 # R-Car M3-W+ + - renesas,i2c-r8a77965 # R-Car M3-N + - renesas,i2c-r8a77970 # R-Car V3M + - renesas,i2c-r8a77980 # R-Car V3H + - renesas,i2c-r8a77990 # R-Car E3 + - renesas,i2c-r8a77995 # R-Car D3 + - renesas,i2c-r8a779a0 # R-Car V3U + - const: renesas,rcar-gen3-i2c # R-Car Gen3 and RZ/G2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-frequency: + description: + Desired I2C bus clock frequency in Hz. The absence of this property + indicates the default frequency 100 kHz. + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + minItems: 2 + maxItems: 4 + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + + i2c-scl-falling-time-ns: + default: 35 + description: + Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C + specification. + + i2c-scl-internal-delay-ns: + default: 50 + description: + Number of nanoseconds the IP core additionally needs to setup SCL. + + i2c-scl-rising-time-ns: + default: 200 + description: + Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C + specification. + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - '#address-cells' + - '#size-cells' + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + + - if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen1-i2c + - renesas,rcar-gen2-i2c + then: + properties: + dmas: false + dma-names: false + + - if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-i2c + - renesas,rcar-gen3-i2c + then: + required: + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7791-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7791-sysc.h> + + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; + reg = <0xe6508000 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <6>; + }; diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.txt b/Documentation/devicetree/bindings/i2c/renesas,riic.txt deleted file mode 100644 index e26fe3ad86a9..000000000000 --- a/Documentation/devicetree/bindings/i2c/renesas,riic.txt +++ /dev/null @@ -1,32 +0,0 @@ -Device tree configuration for Renesas RIIC driver - -Required properties: -- compatible : - "renesas,riic-r7s72100" if the device is a part of a R7S72100 SoC. - "renesas,riic-r7s9210" if the device is a part of a R7S9210 SoC. - "renesas,riic-rz" for a generic RZ/A compatible device. -- reg : address start and address range size of device -- interrupts : 8 interrupts (TEI, RI, TI, SPI, STI, NAKI, ALI, TMOI) -- clock-frequency : frequency of bus clock in Hz -- #address-cells : should be <1> -- #size-cells : should be <0> - -Pinctrl properties might be needed, too. See there. - -Example: - - i2c0: i2c@fcfee000 { - compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; - reg = <0xfcfee000 0x44>; - interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>, - <0 158 IRQ_TYPE_EDGE_RISING>, - <0 159 IRQ_TYPE_EDGE_RISING>, - <0 160 IRQ_TYPE_LEVEL_HIGH>, - <0 161 IRQ_TYPE_LEVEL_HIGH>, - <0 162 IRQ_TYPE_LEVEL_HIGH>, - <0 163 IRQ_TYPE_LEVEL_HIGH>, - <0 164 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <100000>; - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml new file mode 100644 index 000000000000..52d92ec7ec0b --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/renesas,riic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/A and RZ/G2L I2C Bus Interface (RIIC) + +maintainers: + - Chris Brandt <chris.brandt@renesas.com> + - Wolfram Sang <wsa+renesas@sang-engineering.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + items: + - enum: + - renesas,riic-r7s72100 # RZ/A1H + - renesas,riic-r7s9210 # RZ/A2M + - renesas,riic-r9a07g044 # RZ/G2{L,LC} + - const: renesas,riic-rz # RZ/A or RZ/G2L + + reg: + maxItems: 1 + + interrupts: + items: + - description: Transmit End Interrupt (TEI) + - description: Receive Data Full Interrupt (RI) + - description: Transmit Data Empty Interrupt (TI) + - description: Stop Condition Detection Interrupt (SPI) + - description: Start Condition Detection Interrupt (STI) + - description: NACK Reception Interrupt (NAKI) + - description: Arbitration-Lost Interrupt (ALI) + - description: Timeout Interrupt (TMOI) + + clock-frequency: + description: + Desired I2C bus clock frequency in Hz. The absence of this property + indicates the default frequency 100 kHz. + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-frequency + - power-domains + - '#address-cells' + - '#size-cells' + +if: + properties: + compatible: + contains: + enum: + - renesas,riic-r9a07g044 +then: + required: + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r7s72100-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c0: i2c@fcfee000 { + compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; + reg = <0xfcfee000 0x44>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R7S72100_CLK_I2C0>; + clock-frequency = <100000>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml b/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml new file mode 100644 index 000000000000..04e4ffd80bc0 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml @@ -0,0 +1,149 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/renesas,rmobile-iic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Mobile I2C Bus Interface (IIC) + +maintainers: + - Wolfram Sang <wsa+renesas@sang-engineering.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,iic-r8a73a4 # R-Mobile APE6 + - renesas,iic-r8a7740 # R-Mobile A1 + - renesas,iic-sh73a0 # SH-Mobile AG5 + - const: renesas,rmobile-iic # Generic + + - items: + - enum: + - renesas,iic-r8a7742 # RZ/G1H + - renesas,iic-r8a7743 # RZ/G1M + - renesas,iic-r8a7744 # RZ/G1N + - renesas,iic-r8a7745 # RZ/G1E + - renesas,iic-r8a7790 # R-Car H2 + - renesas,iic-r8a7791 # R-Car M2-W + - renesas,iic-r8a7792 # R-Car V2H + - renesas,iic-r8a7793 # R-Car M2-N + - renesas,iic-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-iic # R-Car Gen2 and RZ/G1 + - const: renesas,rmobile-iic # Generic + + - items: + - enum: + - renesas,iic-r8a774a1 # RZ/G2M + - renesas,iic-r8a774b1 # RZ/G2N + - renesas,iic-r8a774c0 # RZ/G2E + - renesas,iic-r8a774e1 # RZ/G2H + - renesas,iic-r8a7795 # R-Car H3 + - renesas,iic-r8a7796 # R-Car M3-W + - renesas,iic-r8a77961 # R-Car M3-W+ + - renesas,iic-r8a77965 # R-Car M3-N + - renesas,iic-r8a77990 # R-Car E3 + - const: renesas,rcar-gen3-iic # R-Car Gen3 and RZ/G2 + - const: renesas,rmobile-iic # Generic + + reg: + maxItems: 1 + + interrupts: true + + clock-frequency: + description: + Desired I2C bus clock frequency in Hz. The absence of this property + indicates the default frequency 100 kHz. + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + minItems: 2 + maxItems: 4 + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - '#address-cells' + - '#size-cells' + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + + - if: + properties: + compatible: + contains: + enum: + - renesas,iic-r8a7740 + - renesas,iic-sh73a0 + then: + properties: + interrupts: + items: + - description: Arbitration Lost Interrupt (ALI) + - description: Non-acknowledge Detection Interrupt (TACKI) + - description: Wait Interrupt (WAITI) + - description: Data Transmit Enable interrupt (DTEI) + else: + properties: + interrupts: + items: + - description: Single combined interrupt + + - if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-iic + - renesas,rcar-gen3-iic + then: + required: + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7790-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7790-sysc.h> + + iic0: i2c@e6500000 { + compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0xe6500000 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + clock-frequency = <400000>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 318>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml new file mode 100644 index 000000000000..ff165ad1bee8 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/ti,omap4-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for I2C controllers on TI's OMAP and K3 SoCs + +maintainers: + - Vignesh Raghavendra <vigneshr@ti.com> + +properties: + compatible: + oneOf: + - enum: + - ti,omap2420-i2c + - ti,omap2430-i2c + - ti,omap3-i2c + - ti,omap4-i2c + - items: + - enum: + - ti,am4372-i2c + - ti,am64-i2c + - ti,am654-i2c + - ti,j721e-i2c + - const: ti,omap4-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: fck + + clock-frequency: true + + power-domains: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + ti,hwmods: + description: + Must be "i2c<n>", n being the instance number (1-based). + This property is applicable only on legacy platforms mainly omap2/3 + and ti81xx and should not be used on other platforms. + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + +# subnode's properties +patternProperties: + "@[0-9a-f]+$": + type: object + description: + Flash device uses the below defined properties in the subnode. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +if: + properties: + compatible: + oneOf: + - const: ti,omap2420-i2c + - const: ti,omap2430-i2c + - const: ti,omap3-i2c + - const: ti,omap4-i2c + +then: + properties: + ti,hwmods: + items: + - pattern: "^i2c([1-9])$" + +else: + properties: + ti,hwmods: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + main_i2c0: i2c@2000000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x2000000 0x100>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml new file mode 100644 index 000000000000..6f8f8a6258fe --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adis16201.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADIS16201 Dual Axis Inclinometer and similar + +maintainers: + - Jonathan Cameron <Jonathan.Cameron@huawei.com> + +description: | + Two similar parts from external interface point of view. + SPI interface. + https://www.analog.com/en/products/adis16201.html + https://www.analog.com/en/products/adis16209.html + +properties: + compatible: + enum: + - adi,adis16201 + - adi,adis16209 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + spi-max-frequency: true + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@0 { + compatible = "adi,adis16201"; + reg = <0>; + spi-max-frequency = <2500000>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma180.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma180.yaml index 45b3abde298f..a7e84089cc3d 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma180.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma180.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/accel/bosch,bma180.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial accelerometers +title: Bosch BMA023 / BMA150/ BMA180 / BMA250 / SMB380 triaxial accelerometers maintainers: - Jonathan Cameron <jic23@kernel.org> @@ -21,7 +21,6 @@ properties: - bosch,bma150 - bosch,bma180 - bosch,bma250 - - bosch,bma254 - bosch,smb380 reg: diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml new file mode 100644 index 000000000000..942b23ad0712 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/bosch,bma220.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BMA220 Trixial Acceleration Sensor + +maintainers: + - Jonathan Cameron <Jonathan.Cameron@huawei.com> + +properties: + compatible: + enum: + - bosch,bma220 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + spi-max-frequency: true + + vdda-supply: true + vddd-supply: true + vddio-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@0 { + compatible = "bosch,bma220"; + reg = <0>; + spi-max-frequency = <2500000>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml index c2efbb813ca2..e830d5295b92 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml @@ -18,6 +18,8 @@ properties: enum: - bosch,bmc150_accel - bosch,bmi055_accel + - bosch,bma253 + - bosch,bma254 - bosch,bma255 - bosch,bma250e - bosch,bma222 @@ -31,7 +33,12 @@ properties: vddio-supply: true interrupts: - maxItems: 1 + minItems: 1 + maxItems: 2 + description: | + The first interrupt listed must be the one connected to the INT1 pin, + the second (optional) interrupt listed must be the one connected to the + INT2 pin (if available). mount-matrix: description: an optional 3x3 mounting rotation matrix. diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml new file mode 100644 index 000000000000..7c8f8bdc2333 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/fsl,mma7455.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MMA7455 and MMA7456 three axis accelerometers + +maintainers: + - Joachim Eastwood <manabian@gmail.com> + - Jonathan Cameron <jic23@kernel.org> + +description: + Devices support both SPI and I2C interfaces. + +properties: + compatible: + enum: + - fsl,mma7455 + - fsl,mma7456 + reg: + maxItems: 1 + + avdd-supply: true + vddio-supply: true + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + description: + Data ready is only available on INT1, but events can use either or + both pins. If not specified, first element assumed to correspond + to INT1 and second (where present) to INT2. + minItems: 1 + maxItems: 2 + items: + enum: + - "INT1" + - "INT2" + + spi-max-frequency: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + # include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@18 { + compatible = "fsl,mma7455"; + reg = <0x18>; + vddio-supply = <&iovdd>; + avdd-supply = <&avdd>; + interrupts = <57 IRQ_TYPE_EDGE_FALLING>, <58 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "INT2", "INT1"; + }; + }; + - | + # include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + accelerometer@0 { + compatible = "fsl,mma7456"; + reg = <0>; + spi-max-frequency = <10000000>; + vddio-supply = <&iovdd>; + avdd-supply = <&avdd>; + interrupts = <57 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "INT1"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml index fbb714431e3d..52fa0f7c2d0e 100644 --- a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml @@ -16,6 +16,7 @@ properties: - kionix,kxcj91008 - kionix,kxtj21009 - kionix,kxtf9 + - kionix,kx023-1025 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml new file mode 100644 index 000000000000..55fd3548e3b6 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/murata,sca3300.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Murata SCA3300 Accelerometer + +description: | + 3-axis industrial accelerometer with digital SPI interface + https://www.murata.com/en-global/products/sensor/accel/sca3300 + +maintainers: + - Tomas Melin <tomas.melin@vaisala.com> + +properties: + compatible: + enum: + - murata,sca3300 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 8000000 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + accelerometer@0 { + compatible = "murata,sca3300"; + reg = <0x0>; + spi-max-frequency = <4000000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml new file mode 100644 index 000000000000..ad529ab2c6e2 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/nxp,fxls8962af.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP FXLS8962AF/FXLS8964AF Accelerometer driver + +maintainers: + - Sean Nyekjaer <sean@geanix.com> + +description: | + NXP FXLS8962AF/FXLS8964AF Accelerometer driver that supports + SPI and I2C interface. + https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf + https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf + +properties: + compatible: + enum: + - nxp,fxls8962af + - nxp,fxls8964af + + reg: + maxItems: 1 + + vdd-supply: + description: phandle to the regulator that provides power to the accelerometer + + spi-max-frequency: true + + interrupts: + maxItems: 1 + + interrupt-names: + enum: + - INT1 + - INT2 + + drive-open-drain: + type: boolean + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@62 { + compatible = "nxp,fxls8962af"; + reg = <0x62>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT1"; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a SPI device node */ + accelerometer@0 { + compatible = "nxp,fxls8962af"; + reg = <0>; + spi-max-frequency = <4000000>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT1"; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adc.yaml b/Documentation/devicetree/bindings/iio/adc/adc.yaml index 912a7635edc4..db348fcbb52c 100644 --- a/Documentation/devicetree/bindings/iio/adc/adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adc.yaml @@ -39,4 +39,16 @@ properties: The first value specifies the positive input pin, the second specifies the negative input pin. + settling-time-us: + description: + Time between enabling the channel and first stable readings. + + oversampling-ratio: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Oversampling is used as replacement of or addition to the low-pass filter. + In some cases, the desired filtering characteristics are a function the + device design and can interact with other characteristics such as + settling time. + additionalProperties: true diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml new file mode 100644 index 000000000000..ca414bb396c5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7298.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7298 ADC + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + Bindings for the Analog Devices AD7298 ADC device. Datasheet can be + found here: + https://www.analog.com/en/products/ad7298.html + +properties: + compatible: + const: adi,ad7298 + + reg: + maxItems: 1 + + vref-supply: true + vdd-supply: true + spi-max-frequency: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7298"; + reg = <0>; + spi-max-frequency = <5000000>; + vref-supply = <&adc_vref>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml new file mode 100644 index 000000000000..cf711082ad7d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml @@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7476.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AD7476 and similar simple SPI ADCs from multiple manufacturers. + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + A lot of simple SPI ADCs have very straight forward interfaces. + They typically don't provide a MOSI pin, simply reading out data + on MISO when the clock toggles. + +properties: + compatible: + enum: + - adi,ad7091 + - adi,ad7091r + - adi,ad7273 + - adi,ad7274 + - adi,ad7276 + - adi,ad7277 + - adi,ad7278 + - adi,ad7466 + - adi,ad7467 + - adi,ad7468 + - adi,ad7475 + - adi,ad7476 + - adi,ad7476a + - adi,ad7477 + - adi,ad7477a + - adi,ad7478 + - adi,ad7478a + - adi,ad7495 + - adi,ad7910 + - adi,ad7920 + - adi,ad7940 + - ti,adc081s + - ti,adc101s + - ti,adc121s + - ti,ads7866 + - ti,ads7867 + - ti,ads7868 + - lltc,ltc2314-14 + + reg: + maxItems: 1 + + vcc-supply: + description: + Main powersupply voltage for the chips, sometimes referred to as VDD on + datasheets. If there is no separate vref-supply, then this is needed + to establish channel scaling. + + vdrive-supply: + description: + Some devices have separate supply for their digital control side. + + vref-supply: + description: + Some devices have a specific reference voltage supplied on a different pin + to the other supplies. Needed to be able to establish channel scaling + unless there is also an internal reference available (e.g. ad7091r) + + spi-max-frequency: true + + adi,conversion-start-gpios: + description: A GPIO used to trigger the start of a conversion + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +allOf: + # Devices where reference is vcc + - if: + properties: + compatible: + contains: + enum: + - adi,ad7091 + - adi,ad7276 + - adi,ad7277 + - adi,ad7278 + - adi,ad7466 + - adi,ad7467 + - adi,ad7468 + - adi,ad7940 + - ti,adc081s + - ti,adc101s + - ti,adc121s + - ti,ads7866 + - ti,ads7868 + required: + - vcc-supply + # Devices with a vref + - if: + properties: + compatible: + contains: + enum: + - adi,ad7091r + - adi,ad7273 + - adi,ad7274 + - adi,ad7475 + - lltc,ltc2314-14 + then: + properties: + vref-supply: true + else: + properties: + vref-supply: false + # Devices with a vref where it is not optional + - if: + properties: + compatible: + contains: + enum: + - adi,ad7273 + - adi,ad7274 + - adi,ad7475 + - lltc,ltc2314-14 + then: + required: + - vref-supply + - if: + properties: + compatible: + contains: + enum: + - adi,ad7475 + - adi,ad7495 + then: + properties: + vdrive-supply: true + else: + properties: + vdrive-supply: false + - if: + properties: + compatible: + contains: + enum: + - adi,ad7091 + - adi,ad7091r + then: + properties: + adi,conversion-start-gpios: true + else: + properties: + adi,conversion-start-gpios: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7091r"; + reg = <0>; + spi-max-frequency = <5000000>; + vcc-supply = <&adc_vcc>; + vref-supply = <&adc_vref>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml index 3be8955587e4..7e8328e9ce13 100644 --- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml @@ -41,7 +41,6 @@ properties: clock-names: minItems: 2 - maxItems: 4 items: - const: clkin - const: core diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 6f2398cdc82d..733351dee252 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -38,14 +38,12 @@ properties: dfsdm clock can also feed CLKOUT, when CLKOUT is used. - description: audio clock can be used as an alternate to feed CLKOUT. minItems: 1 - maxItems: 2 clock-names: items: - const: dfsdm - const: audio minItems: 1 - maxItems: 2 "#address-cells": const: 1 @@ -102,7 +100,6 @@ patternProperties: st,adc-channel-names: description: List of single-ended channel names. - $ref: /schemas/types.yaml#/definitions/string-array st,filter-order: description: | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml new file mode 100644 index 000000000000..601d69971d84 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,tsc2046.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TSC2046 touch screen controller. + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +description: | + TSC2046 is a touch screen controller with 8 channels ADC. + +properties: + compatible: + enum: + - ti,tsc2046e-adc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + spi-max-frequency: true + + "#io-channel-cells": + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - reg + +patternProperties: + "^channel@[0-7]$": + $ref: "adc.yaml" + type: object + + properties: + reg: + description: | + The channel number. It can have up to 8 channels + items: + minimum: 0 + maximum: 7 + + settling-time-us: true + oversampling-ratio: true + + required: + - reg + + additionalProperties: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,tsc2046e-adc"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>; + #io-channel-cells = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + channel@1 { + reg = <1>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + channel@2 { + reg = <2>; + }; + channel@3 { + reg = <3>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + channel@4 { + reg = <4>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + channel@5 { + reg = <5>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + channel@6 { + reg = <6>; + }; + channel@7 { + reg = <7>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.yaml b/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.yaml index 90439a8dc785..f8a112c9a822 100644 --- a/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.yaml +++ b/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.yaml @@ -24,6 +24,9 @@ properties: description: | Channel node of a voltage io-channel. + "#io-channel-cells": + const: 0 + shunt-resistor-micro-ohms: description: The shunt resistance. @@ -57,6 +60,7 @@ examples: sysi { compatible = "current-sense-shunt"; io-channels = <&tiadc 0>; + #io-channel-cells = <0>; /* Divide the voltage by 3300000/1000000 (or 3.3) for the current. */ shunt-resistor-micro-ohms = <3300000>; diff --git a/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml b/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml new file mode 100644 index 000000000000..a02036ef9e8d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/cdc/adi,ad7746.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AD7746 24-Bit Capacitance-to-Digital Converter with Temperature Sensor + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + AD7746 24-Bit Capacitance-to-Digital Converter with Temperature Sensor + + Specifications about the part can be found at: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7291.pdf + +properties: + compatible: + enum: + - adi,ad7745 + - adi,ad7746 + - adi,ad7747 + + reg: + maxItems: 1 + + adi,excitation-vdd-permille: + description: | + Set VDD per mille to be used as the excitation voltage. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [125, 250, 375, 500] + + adi,exca-output-en: + description: Enables the EXCA pin as the excitation output. + type: boolean + + adi,exca-output-invert: + description: | + Inverts the excitation output in the EXCA pin. + Normally only one of the EXCX pins would be inverted, check the following + application notes for more details + https://www.analog.com/media/en/technical-documentation/application-notes/AN-1585.pdf + type: boolean + + adi,excb-output-en: + description: Enables the EXCB pin as the excitation output. + type: boolean + + adi,excb-output-invert: + description: Inverts the excitation output in the EXCB pin. + type: boolean + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ad7746: cdc@48 { + compatible = "adi,ad7746"; + reg = <0x48>; + adi,excitation-vdd-permille = <125>; + + adi,exca-output-en; + adi,exca-output-invert; + adi,excb-output-en; + adi,excb-output-invert; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml index a93d1972a5c2..967500b7e773 100644 --- a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml @@ -22,7 +22,6 @@ properties: required: - compatible - - reg additionalProperties: false @@ -37,5 +36,11 @@ examples: reg = <0x69>; }; }; + - | + serial { + air-pollution-sensor { + compatible = "sensirion,sps30"; + }; + }; ... diff --git a/Documentation/devicetree/bindings/iio/dac/ad5755.txt b/Documentation/devicetree/bindings/iio/dac/ad5755.txt deleted file mode 100644 index 502e1e55adbd..000000000000 --- a/Documentation/devicetree/bindings/iio/dac/ad5755.txt +++ /dev/null @@ -1,124 +0,0 @@ -* Analog Devices AD5755 IIO Multi-Channel DAC Linux Driver - -Required properties: - - compatible: Has to contain one of the following: - adi,ad5755 - adi,ad5755-1 - adi,ad5757 - adi,ad5735 - adi,ad5737 - - - reg: spi chip select number for the device - - spi-cpha or spi-cpol: is the only modes that is supported - -Recommended properties: - - spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Optional properties: -See include/dt-bindings/iio/ad5755.h - - adi,ext-dc-dc-compenstation-resistor: boolean set if the hardware have an - external resistor and thereby bypasses - the internal compensation resistor. - - adi,dc-dc-phase: - Valid values for DC DC Phase control is: - 0: All dc-to-dc converters clock on the same edge. - 1: Channel A and Channel B clock on the same edge, - Channel C and Channel D clock on opposite edges. - 2: Channel A and Channel C clock on the same edge, - Channel B and Channel D clock on opposite edges. - 3: Channel A, Channel B, Channel C, and Channel D - clock 90 degrees out of phase from each other. - - adi,dc-dc-freq-hz: - Valid values for DC DC frequency is [Hz]: - 250000 - 410000 - 650000 - - adi,dc-dc-max-microvolt: - Valid values for the maximum allowed Vboost voltage supplied by - the dc-to-dc converter is: - 23000000 - 24500000 - 27000000 - 29500000 - -Optional for every channel: - - adi,mode: - Valid values for DAC modes is: - 0: 0 V to 5 V voltage range. - 1: 0 V to 10 V voltage range. - 2: Plus minus 5 V voltage range. - 3: Plus minus 10 V voltage range. - 4: 4 mA to 20 mA current range. - 5: 0 mA to 20 mA current range. - 6: 0 mA to 24 mA current range. - - adi,ext-current-sense-resistor: boolean set if the hardware a external - current sense resistor. - - adi,enable-voltage-overrange: boolean enable voltage overrange - - adi,slew: Array of slewrate settings should contain 3 fields: - 1: Should be either 0 or 1 in order to enable or disable slewrate. - 2: Slew rate settings: - Valid values for the slew rate update frequency: - 64000 - 32000 - 16000 - 8000 - 4000 - 2000 - 1000 - 500 - 250 - 125 - 64 - 32 - 16 - 8 - 4 - 0 - 3: Slew step size: - Valid values for the step size LSBs: - 1 - 2 - 4 - 16 - 32 - 64 - 128 - 256 - -Example: -dac@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "adi,ad5755"; - reg = <0>; - spi-max-frequency = <1000000>; - spi-cpha; - adi,dc-dc-phase = <0>; - adi,dc-dc-freq-hz = <410000>; - adi,dc-dc-max-microvolt = <23000000>; - channel@0 { - reg = <0>; - adi,mode = <4>; - adi,ext-current-sense-resistor; - adi,slew = <0 64000 1>; - }; - channel@1 { - reg = <1>; - adi,mode = <4>; - adi,ext-current-sense-resistor; - adi,slew = <0 64000 1>; - }; - channel@2 { - reg = <2>; - adi,mode = <4>; - adi,ext-current-sense-resistor; - adi,slew = <0 64000 1>; - }; - channel@3 { - reg = <3>; - adi,mode = <4>; - adi,ext-current-sense-resistor; - adi,slew = <0 64000 1>; - }; -}; diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml new file mode 100644 index 000000000000..be419ac46caa --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ad5755.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD5755 Multi-Channel DAC + +maintainers: + - Sean Nyekjaer <sean.nyekjaer@prevas.dk> + +properties: + compatible: + enum: + - adi,ad5755 + - adi,ad5755-1 + - adi,ad5757 + - adi,ad5735 + - adi,ad5737 + + reg: + maxItems: 1 + + spi-cpha: + description: Either this or spi-cpol but not both. + spi-cpol: true + + spi-max-frequency: true + + adi,ext-dc-dc-compenstation-resistor: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set if the hardware have an external resistor and thereby bypasses + the internal compensation resistor. + + adi,dc-dc-phase: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Valid values for DC DC Phase control is: + 0: All dc-to-dc converters clock on the same edge. + 1: Channel A and Channel B clock on the same edge, + Channel C and Channel D clock on opposite edges. + 2: Channel A and Channel C clock on the same edge, + Channel B and Channel D clock on opposite edges. + 3: Channel A, Channel B, Channel C, and Channel D + clock 90 degrees out of phase from each other. + + adi,dc-dc-freq-hz: + enum: [250000, 410000, 650000] + + adi,dc-dc-max-microvolt: + description: + Maximum allowed Vboost voltage supplied by the dc-to-dc converter. + enum: [23000000, 24500000, 27000000, 29500000] + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "^channel@[0-7]$": + type: object + description: Child node to describe a channel + properties: + reg: + maxItems: 1 + + adi,mode: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 6 + description: | + Valid values for DAC modes is: + 0: 0 V to 5 V voltage range. + 1: 0 V to 10 V voltage range. + 2: Plus minus 5 V voltage range. + 3: Plus minus 10 V voltage range. + 4: 4 mA to 20 mA current range. + 5: 0 mA to 20 mA current range. + 6: 0 mA to 24 mA current range. + + adi,ext-current-sense-resistor: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set if the hardware has an external current sense resistor + + adi,enable-voltage-overrange: + $ref: /schemas/types.yaml#/definitions/flag + description: Enable voltage overrange + + adi,slew: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + Array of slewrate settings should contain 3 fields: + 1: Should be either 0 or 1 in order to enable or disable slewrate. + 2: Slew rate update frequency + 3: Slew step size + items: + - enum: [0, 1] + - enum: [64000, 32000, 16000, 8000, 4000, 2000, 1000, 500, 250, 125, 64, 32, 16, 8, 4, 0] + - enum: [1, 2, 4, 16, 32, 64, 128, 256] + + required: + - reg + + additionalProperties: false + +oneOf: + - required: + - spi-cpha + - required: + - spi-cpol + +examples: + - | + #include <dt-bindings/iio/adi,ad5592r.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + dac@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "adi,ad5755"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpha; + adi,dc-dc-phase = <0>; + adi,dc-dc-freq-hz = <410000>; + adi,dc-dc-max-microvolt = <23000000>; + channel@0 { + reg = <0>; + adi,mode = <4>; + adi,ext-current-sense-resistor; + adi,slew = <0 64000 1>; + }; + channel@1 { + reg = <1>; + adi,mode = <4>; + adi,ext-current-sense-resistor; + adi,slew = <0 64000 1>; + }; + channel@2 { + reg = <2>; + adi,mode = <4>; + adi,ext-current-sense-resistor; + adi,slew = <0 64000 1>; + }; + channel@3 { + reg = <3>; + adi,mode = <4>; + adi,ext-current-sense-resistor; + adi,slew = <0 64000 1>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml new file mode 100644 index 000000000000..b0157050f1ee --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/ti,dac082s085.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments DAC082s085 and similar DACs + +description: + A family of Texas Instruments 8/10/12-bit 2/4-channel DACs + +maintainers: + - Lukas Wunner <lukas@wunner.de> + +properties: + compatible: + enum: + - ti,dac082s085 + - ti,dac102s085 + - ti,dac122s085 + - ti,dac084s085 + - ti,dac104s085 + - ti,dac124s085 + + reg: + maxItems: 1 + + spi-cpha: true + spi-cpol: + description: + Must be either spi-cpha, or spi-cpol but not both. + + vref-supply: + description: Needed to provide output scaling. + + spi-max-frequency: true + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +oneOf: + - required: + - spi-cpha + - required: + - spi-cpol + +examples: + - | + vref_2v5_reg: regulator-vref { + compatible = "regulator-fixed"; + regulator-name = "2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + spi { + #address-cells = <1>; + #size-cells = <0>; + + dac@0 { + compatible = "ti,dac082s085"; + reg = <0>; + spi-max-frequency = <40000000>; + spi-cpol; + vref-supply = <&vref_2v5_reg>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt b/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt deleted file mode 100644 index 9cb0e10df704..000000000000 --- a/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt +++ /dev/null @@ -1,34 +0,0 @@ -Texas Instruments 8/10/12-bit 2/4-channel DAC driver - -Required properties: - - compatible: Must be one of: - "ti,dac082s085" - "ti,dac102s085" - "ti,dac122s085" - "ti,dac084s085" - "ti,dac104s085" - "ti,dac124s085" - - reg: Chip select number. - - spi-cpha, spi-cpol: SPI mode (0,1) or (1,0) must be used, so specify - either spi-cpha or spi-cpol (but not both). - - vref-supply: Phandle to the external reference voltage supply. - -For other required and optional properties of SPI slave nodes please refer to -../../spi/spi-bus.txt. - -Example: - vref_2v5_reg: regulator-vref { - compatible = "regulator-fixed"; - regulator-name = "2v5"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - dac@0 { - compatible = "ti,dac082s085"; - reg = <0>; - spi-max-frequency = <40000000>; - spi-cpol; - vref-supply = <&vref_2v5_reg>; - }; diff --git a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml new file mode 100644 index 000000000000..83b88c6a243d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/amstaos,tsl2591.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS/TAOS TSL2591 Ambient Light Sensor (ALS) + +maintainers: + - Joe Sandom <joe.g.sandom@gmail.com> + +description: | + AMS/TAOS TSL2591 is a very-high sensitivity + light-to-digital converter that transforms light intensity into a digital + signal. + +properties: + compatible: + const: amstaos,tsl2591 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: + Interrupt (INT:Pin 2) Active low. Should be set to IRQ_TYPE_EDGE_FALLING. + interrupt is used to detect if the light intensity has fallen below + or reached above the configured threshold values. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tsl2591@29 { + compatible = "amstaos,tsl2591"; + reg = <0x29>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt deleted file mode 100644 index 89647d714387..000000000000 --- a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt +++ /dev/null @@ -1,39 +0,0 @@ -I/O channel multiplexer bindings - -If a multiplexer is used to select which hardware signal is fed to -e.g. an ADC channel, these bindings describe that situation. - -Required properties: -- compatible : "io-channel-mux" -- io-channels : Channel node of the parent channel that has multiplexed - input. -- io-channel-names : Should be "parent". -- #address-cells = <1>; -- #size-cells = <0>; -- mux-controls : Mux controller node to use for operating the mux -- channels : List of strings, labeling the mux controller states. - -For each non-empty string in the channels property, an io-channel will -be created. The number of this io-channel is the same as the index into -the list of strings in the channels property, and also matches the mux -controller state. The mux controller state is described in -../mux/mux-controller.txt - -Example: - mux: mux-controller { - compatible = "gpio-mux"; - #mux-control-cells = <0>; - - mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, - <&pioA 1 GPIO_ACTIVE_HIGH>; - }; - - adc-mux { - compatible = "io-channel-mux"; - io-channels = <&adc 0>; - io-channel-names = "parent"; - - mux-controls = <&mux>; - - channels = "sync", "in", "system-regulator"; - }; diff --git a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml new file mode 100644 index 000000000000..870b043406d8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/multiplexer/io-channel-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I/O channel multiplexer bindings + +maintainers: + - Peter Rosin <peda@axentia.se> + +description: | + If a multiplexer is used to select which hardware signal is fed to + e.g. an ADC channel, these bindings describe that situation. + + For each non-empty string in the channels property, an io-channel will be + created. The number of this io-channel is the same as the index into the list + of strings in the channels property, and also matches the mux controller + state. The mux controller state is described in + Documentation/devicetree/bindings/mux/mux-controller.yaml + +properties: + + compatible: + const: io-channel-mux + + io-channels: + maxItems: 1 + description: Channel node of the parent channel that has multiplexed input. + + io-channel-names: + const: parent + + mux-controls: true + mux-control-names: true + + channels: + $ref: /schemas/types.yaml#/definitions/string-array + description: + List of strings, labeling the mux controller states. + +required: + - compatible + - io-channels + - io-channel-names + - mux-controls + - channels + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, + <&pioA 1 GPIO_ACTIVE_HIGH>; + }; + + adc-mux { + compatible = "io-channel-mux"; + io-channels = <&adc 0>; + io-channel-names = "parent"; + + mux-controls = <&mux>; + channels = "sync", "in", "system-regulator"; + }; +... diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml index 7e98f47987dc..b2a1e42c56fa 100644 --- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml +++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml @@ -6,7 +6,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics MEMS sensors -description: | +description: The STMicroelectronics sensor devices are pretty straight-forward + I2C or SPI devices, all sharing the same device tree descriptions no matter + what type of sensor it is. Note that whilst this covers many STMicro MEMs sensors, some more complex IMUs need their own bindings. The STMicroelectronics sensor devices are pretty straight-forward I2C or @@ -15,90 +17,181 @@ description: | maintainers: - Denis Ciocca <denis.ciocca@st.com> + - Linus Walleij <linus.walleij@linaro.org> properties: compatible: - description: | - Some values are deprecated. - st,lis3lv02d (deprecated, use st,lis3lv02dl-accel) - st,lis302dl-spi (deprecated, use st,lis3lv02dl-accel) - enum: - # Accelerometers - - st,lis3lv02d - - st,lis302dl-spi - - st,lis3lv02dl-accel - - st,lsm303dlh-accel - - st,lsm303dlhc-accel - - st,lis3dh-accel - - st,lsm330d-accel - - st,lsm330dl-accel - - st,lsm330dlc-accel - - st,lis331dl-accel - - st,lis331dlh-accel - - st,lsm303dl-accel - - st,lsm303dlm-accel - - st,lsm330-accel - - st,lsm303agr-accel - - st,lis2dh12-accel - - st,h3lis331dl-accel - - st,lng2dm-accel - - st,lis3l02dq - - st,lis2dw12 - - st,lis3dhh - - st,lis3de - - st,lis2de12 - - st,lis2hh12 - # Gyroscopes - - st,l3g4200d-gyro - - st,lsm330d-gyro - - st,lsm330dl-gyro - - st,lsm330dlc-gyro - - st,l3gd20-gyro - - st,l3gd20h-gyro - - st,l3g4is-gyro - - st,lsm330-gyro - - st,lsm9ds0-gyro - # Magnetometers - - st,lsm303agr-magn - - st,lsm303dlh-magn - - st,lsm303dlhc-magn - - st,lsm303dlm-magn - - st,lis3mdl-magn - - st,lis2mdl - - st,lsm9ds1-magn - - st,iis2mdc - # Pressure sensors - - st,lps001wp-press - - st,lps25h-press - - st,lps331ap-press - - st,lps22hb-press - - st,lps33hw - - st,lps35hw - - st,lps22hh + oneOf: + - description: STMicroelectronics Accelerometers + enum: + - st,h3lis331dl-accel + - st,lis2de12 + - st,lis2dw12 + - st,lis2hh12 + - st,lis2dh12-accel + - st,lis331dl-accel + - st,lis331dlh-accel + - st,lis3de + - st,lis3dh-accel + - st,lis3dhh + - st,lis3l02dq + - st,lis3lv02dl-accel + - st,lng2dm-accel + - st,lsm303agr-accel + - st,lsm303dl-accel + - st,lsm303dlh-accel + - st,lsm303dlhc-accel + - st,lsm303dlm-accel + - st,lsm330-accel + - st,lsm330d-accel + - st,lsm330dl-accel + - st,lsm330dlc-accel + - description: STMicroelectronics Gyroscopes + enum: + - st,l3g4200d-gyro + - st,l3g4is-gyro + - st,l3gd20-gyro + - st,l3gd20h-gyro + - st,lsm330-gyro + - st,lsm330d-gyro + - st,lsm330dl-gyro + - st,lsm330dlc-gyro + - st,lsm9ds0-gyro + - description: STMicroelectronics Magnetometers + enum: + - st,lis2mdl + - st,lis3mdl-magn + - st,lsm303agr-magn + - st,lsm303dlh-magn + - st,lsm303dlhc-magn + - st,lsm303dlm-magn + - st,lsm9ds1-magn + - description: STMicroelectronics Pressure Sensors + enum: + - st,lps001wp-press + - st,lps22hb-press + - st,lps22hh + - st,lps25h-press + - st,lps331ap-press + - st,lps33hw + - st,lps35hw + - description: IMUs + enum: + - st,lsm9ds0-imu + - description: Deprecated bindings + enum: + - st,lis302dl-spi + - st,lis3lv02d + deprecated: true reg: maxItems: 1 interrupts: + description: interrupt line(s) connected to the DRDY line(s) and/or the + Intertial interrupt lines INT1 and INT2 if these exist. This means up to + three interrupts, and the DRDY must be the first one if it exists on + the package. The trigger edge of the interrupts is sometimes software + configurable in the hardware so the operating system should parse this + flag and set up the trigger edge as indicated in the device tree. minItems: 1 + maxItems: 2 vdd-supply: true vddio-supply: true st,drdy-int-pin: + description: the pin on the package that will be used to signal + "data ready" (valid values 1 or 2). This property is not configurable + on all sensors. $ref: /schemas/types.yaml#/definitions/uint32 - description: - Some sensors have multiple possible pins via which they can provide - a data ready interrupt. This selects which one. - enum: - - 1 - - 2 + enum: [1, 2] drive-open-drain: $ref: /schemas/types.yaml#/definitions/flag - description: | - The interrupt/data ready line will be configured as open drain, which - is useful if several sensors share the same interrupt line. + description: the interrupt/data ready line will be configured + as open drain, which is useful if several sensors share the same + interrupt line. (This binding is taken from pinctrl.) + + mount-matrix: + description: an optional 3x3 mounting rotation matrix. + +allOf: + - if: + properties: + compatible: + enum: + # These have no interrupts + - st,lps001wp + then: + properties: + interrupts: false + st,drdy-int-pin: false + drive-open-drain: false + + - if: + properties: + compatible: + enum: + # These have only DRDY + - st,lis2mdl + - st,lis3l02dq + - st,lis3lv02dl-accel + - st,lps22hb-press + - st,lps22hh + - st,lps25h-press + - st,lps33hw + - st,lps35hw + - st,lsm303agr-magn + - st,lsm303dlh-magn + - st,lsm303dlhc-magn + - st,lsm303dlm-magn + then: + properties: + interrupts: + maxItems: 1 + st,drdy-int-pin: false + + - if: + properties: + compatible: + enum: + # Two intertial interrupts i.e. accelerometer/gyro interrupts + - st,h3lis331dl-accel + - st,l3g4200d-gyro + - st,l3g4is-gyro + - st,l3gd20-gyro + - st,l3gd20h-gyro + - st,lis2de12 + - st,lis2dw12 + - st,lis2hh12 + - st,lis2dh12-accel + - st,lis331dl-accel + - st,lis331dlh-accel + - st,lis3de + - st,lis3dh-accel + - st,lis3dhh + - st,lis3mdl-magn + - st,lng2dm-accel + - st,lps331ap-press + - st,lsm303agr-accel + - st,lsm303dlh-accel + - st,lsm303dlhc-accel + - st,lsm303dlm-accel + - st,lsm330-accel + - st,lsm330-gyro + - st,lsm330d-accel + - st,lsm330d-gyro + - st,lsm330dl-accel + - st,lsm330dl-gyro + - st,lsm330dlc-accel + - st,lsm330dlc-gyro + - st,lsm9ds0-gyro + - st,lsm9ds1-magn + then: + properties: + interrupts: + maxItems: 2 required: - compatible @@ -110,15 +203,30 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> i2c { - #address-cells = <1>; - #size-cells = <0>; - accelerometer@1d { - compatible = "st,lis3lv02dl-accel"; - reg = <0x1d>; - interrupt-parent = <&gpio2>; - interrupts = <18 IRQ_TYPE_EDGE_RISING>; - pinctrl-0 = <&lis3lv02dl_nhk_mode>; - pinctrl-names = "default"; - }; + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@1c { + compatible = "st,lis331dl-accel"; + reg = <0x1c>; + st,drdy-int-pin = <1>; + vdd-supply = <&ldo1>; + vddio-supply = <&ldo2>; + interrupt-parent = <&gpio>; + interrupts = <18 IRQ_TYPE_EDGE_RISING>, <19 IRQ_TYPE_EDGE_RISING>; + }; + }; + spi { + #address-cells = <1>; + #size-cells = <0>; + num-cs = <1>; + + l3g4200d: gyroscope@0 { + compatible = "st,l3g4200d-gyro"; + st,drdy-int-pin = <2>; + reg = <0>; + vdd-supply = <&vcc_io>; + vddio-supply = <&vcc_io>; + }; }; ... diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml new file mode 100644 index 000000000000..347bc16a4671 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/iio/temperature/ti,tmp117.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: "TI TMP117 - Digital temperature sensor with integrated NV memory" + +description: | + TI TMP117 - Digital temperature sensor with integrated NV memory that supports + I2C interface. + https://www.ti.com/lit/gpn/tmp1 + +maintainers: + - Puranjay Mohan <puranjay12@gmail.com> + +properties: + compatible: + enum: + - ti,tmp117 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tmp117@48 { + compatible = "ti,tmp117"; + reg = <0x48>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/fsl-mma8450.txt b/Documentation/devicetree/bindings/input/fsl-mma8450.txt deleted file mode 100644 index 0b96e5737d3a..000000000000 --- a/Documentation/devicetree/bindings/input/fsl-mma8450.txt +++ /dev/null @@ -1,12 +0,0 @@ -* Freescale MMA8450 3-Axis Accelerometer - -Required properties: -- compatible : "fsl,mma8450". -- reg: the I2C address of MMA8450 - -Example: - -accelerometer: mma8450@1c { - compatible = "fsl,mma8450"; - reg = <0x1c>; -}; diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml index 74244d21d2b3..d41d8743aad4 100644 --- a/Documentation/devicetree/bindings/input/input.yaml +++ b/Documentation/devicetree/bindings/input/input.yaml @@ -38,6 +38,5 @@ properties: Duration in seconds which the key should be kept pressed for device to reset automatically. Device with key pressed reset feature can specify this property. - $ref: /schemas/types.yaml#/definitions/uint32 additionalProperties: true diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt index 34ab5763f494..6cd08bca2c66 100644 --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt @@ -8,6 +8,8 @@ PROPERTIES Definition: must be one of: "qcom,pm8941-pwrkey" "qcom,pm8941-resin" + "qcom,pmk8350-pwrkey" + "qcom,pmk8350-resin" - reg: Usage: required diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml new file mode 100644 index 000000000000..762e56ee90cd --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/cypress,cy8ctma340.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress CY8CTMA340 series touchscreen controller bindings + +description: The Cypress CY8CTMA340 series (also known as "CYTTSP" after + the marketing name Cypress TrueTouch Standard Product) touchscreens can + be connected to either I2C or SPI buses. + +maintainers: + - Javier Martinez Canillas <javier@dowhile0.org> + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: touchscreen.yaml# + +properties: + $nodename: + pattern: "^touchscreen(@.*)?$" + + compatible: + oneOf: + - const: cypress,cy8ctma340 + - const: cypress,cy8ctst341 + - const: cypress,cyttsp-spi + description: Legacy compatible for SPI connected CY8CTMA340 + deprecated: true + - const: cypress,cyttsp-i2c + description: Legacy compatible for I2C connected CY8CTMA340 + deprecated: true + + reg: + description: I2C address when used on the I2C bus, or the SPI chip + select index when used on the SPI bus + + clock-frequency: + description: I2C client clock frequency, defined for host when using + the device on the I2C bus + minimum: 0 + maximum: 400000 + + spi-max-frequency: + description: SPI clock frequency, defined for host, defined when using + the device on the SPI bus. The throughput is maximum 2 Mbps so the + typical value is 2000000, if higher rates are used the total throughput + needs to be restricted to 2 Mbps. + minimum: 0 + maximum: 6000000 + + interrupts: + description: Interrupt to host + maxItems: 1 + + vcpin-supply: + description: Analog power supply regulator on VCPIN pin + + vdd-supply: + description: Digital power supply regulator on VDD pin + + reset-gpios: + description: Reset line for the touchscreen, should be tagged + as GPIO_ACTIVE_LOW + + bootloader-key: + description: the 8-byte bootloader key that is required to switch + the chip from bootloader mode (default mode) to application mode + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 8 + maxItems: 8 + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + + active-distance: + description: the distance in pixels beyond which a touch must move + before movement is detected and reported by the device + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + + active-interval-ms: + description: the minimum period in ms between consecutive + scanning/processing cycles when the chip is in active mode + minimum: 0 + maximum: 255 + + lowpower-interval-ms: + description: the minimum period in ms between consecutive + scanning/processing cycles when the chip is in low-power mode + minimum: 0 + maximum: 2550 + + touch-timeout-ms: + description: minimum time in ms spent in the active power state while no + touches are detected before entering low-power mode + minimum: 0 + maximum: 2550 + + use-handshake: + description: enable register-based handshake (boolean). This should only + be used if the chip is configured to use 'blocking communication with + timeout' (in this case the device generates an interrupt at the end of + every scanning/processing cycle) + $ref: /schemas/types.yaml#/definitions/flag + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - bootloader-key + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + num-cs = <1>; + cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + + touchscreen@0 { + compatible = "cypress,cy8ctma340"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>; + vdd-supply = <&ldo_aux1_reg>; + vcpin-supply = <&ldo_aux2_reg>; + bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + active-interval-ms = <0>; + touch-timeout-ms = <255>; + lowpower-interval-ms = <10>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt b/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt deleted file mode 100644 index 6ee274aa8b03..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt +++ /dev/null @@ -1,93 +0,0 @@ -* Cypress cyttsp touchscreen controller - -Required properties: - - compatible : must be "cypress,cyttsp-i2c" or "cypress,cyttsp-spi" - - reg : Device I2C address or SPI chip select number - - spi-max-frequency : Maximum SPI clocking speed of the device (for cyttsp-spi) - - interrupts : (gpio) interrupt to which the chip is connected - (see interrupt binding[0]). - - bootloader-key : the 8-byte bootloader key that is required to switch - the chip from bootloader mode (default mode) to - application mode. - This property has to be specified as an array of 8 - '/bits/ 8' values. - -Optional properties: - - reset-gpios : the reset gpio the chip is connected to - (see GPIO binding[1] for more details). - - touchscreen-size-x : horizontal resolution of touchscreen (in pixels) - - touchscreen-size-y : vertical resolution of touchscreen (in pixels) - - touchscreen-fuzz-x : horizontal noise value of the absolute input device - (in pixels) - - touchscreen-fuzz-y : vertical noise value of the absolute input device - (in pixels) - - active-distance : the distance in pixels beyond which a touch must move - before movement is detected and reported by the device. - Valid values: 0-15. - - active-interval-ms : the minimum period in ms between consecutive - scanning/processing cycles when the chip is in active mode. - Valid values: 0-255. - - lowpower-interval-ms : the minimum period in ms between consecutive - scanning/processing cycles when the chip is in low-power mode. - Valid values: 0-2550 - - touch-timeout-ms : minimum time in ms spent in the active power state while no - touches are detected before entering low-power mode. - Valid values: 0-2550 - - use-handshake : enable register-based handshake (boolean). This should - only be used if the chip is configured to use 'blocking - communication with timeout' (in this case the device - generates an interrupt at the end of every - scanning/processing cycle). - -[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -[1]: Documentation/devicetree/bindings/gpio/gpio.txt - -Example: - &i2c1 { - /* ... */ - cyttsp@a { - compatible = "cypress,cyttsp-i2c"; - reg = <0xa>; - interrupt-parent = <&gpio0>; - interrupts = <28 0>; - reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; - - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - touchscreen-fuzz-x = <4>; - touchscreen-fuzz-y = <7>; - - bootloader-key = /bits/ 8 <0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08>; - active-distance = <8>; - active-interval-ms = <0>; - lowpower-interval-ms = <200>; - touch-timeout-ms = <100>; - }; - - /* ... */ - }; - - &mcspi1 { - /* ... */ - cyttsp@0 { - compatible = "cypress,cyttsp-spi"; - spi-max-frequency = <6000000>; - reg = <0>; - interrupt-parent = <&gpio0>; - interrupts = <28 0>; - reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; - - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - touchscreen-fuzz-x = <4>; - touchscreen-fuzz-y = <7>; - - bootloader-key = /bits/ 8 <0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08>; - active-distance = <8>; - active-interval-ms = <0>; - lowpower-interval-ms = <200>; - touch-timeout-ms = <100>; - }; - - /* ... */ - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index bfc3a8b5e118..2e8da7470513 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -56,6 +56,7 @@ properties: wakeup-source: true vcc-supply: true + iovcc-supply: true gain: description: Allows setting the sensitivity in the range from 0 to 31. diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt deleted file mode 100644 index af5223bb5bdd..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt +++ /dev/null @@ -1,33 +0,0 @@ -Generic resistive touchscreen ADC - -Required properties: - - - compatible: must be "resistive-adc-touch" -The device must be connected to an ADC device that provides channels for -position measurement and optional pressure. -Refer to -https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml -for details - - - iio-channels: must have at least two channels connected to an ADC device. -These should correspond to the channels exposed by the ADC device and should -have the right index as the ADC device registers them. These channels -represent the relative position on the "x" and "y" axes. - - iio-channel-names: must have all the channels' names. Mandatory channels -are "x" and "y". - -Optional properties: - - iio-channels: The third channel named "pressure" is optional and can be -used if the ADC device also measures pressure besides position. -If this channel is missing, pressure will be ignored and the touchscreen -will only report position. - - iio-channel-names: optional channel named "pressure". - -Example: - - resistive_touch: resistive_touch { - compatible = "resistive-adc-touch"; - touchscreen-min-pressure = <50000>; - io-channels = <&adc 24>, <&adc 25>, <&adc 26>; - io-channel-names = "x", "y", "pressure"; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml new file mode 100644 index 000000000000..7fc22a403d48 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/resistive-adc-touch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic resistive touchscreen ADC + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +description: | + Generic ADC based resistive touchscreen controller + The device must be connected to an ADC device that provides channels for + position measurement and optional pressure. + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: resistive-adc-touch + + io-channels: + minItems: 2 + items: + - description: x + - description: y + - description: pressure (optional) + - description: z1 (optional) + - description: z2 (optional) + + io-channel-names: + oneOf: + - items: + - enum: [x, y] + - enum: [x, y] + - items: + - enum: [x, y, pressure] + - enum: [x, y, pressure] + - enum: [x, y, pressure] + - items: + - enum: [x, y, z1, z2] + - enum: [x, y, z1, z2] + - enum: [x, y, z1, z2] + - enum: [x, y, z1, z2] + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + touchscreen-min-pressure: true + touchscreen-x-plate-ohms: true + +additionalProperties: false + +required: + - compatible + - io-channels + - io-channel-names + +examples: + - | + touchscreen { + compatible = "resistive-adc-touch"; + io-channels = <&adc 24>, <&adc 25>; + io-channel-names = "y", "x"; + }; + - | + touchscreen { + compatible = "resistive-adc-touch"; + touchscreen-min-pressure = <50000>; + io-channels = <&adc 24>, <&adc 25>, <&adc 26>; + io-channel-names = "y", "pressure", "x"; + }; + - | + touchscreen { + compatible = "resistive-adc-touch"; + touchscreen-min-pressure = <50000>; + io-channels = <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>; + io-channel-names = "x", "z1", "z2", "y"; + touchscreen-x-plate-ohms = <800>; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml new file mode 100644 index 000000000000..1d8ca19fd37a --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/sitronix,st1232.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sitronix st1232 or st1633 touchscreen controller + +maintainers: + - Bastian Hecht <hechtb@gmail.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - sitronix,st1232 + - sitronix,st1633 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpios: + description: A phandle to the reset GPIO + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@55 { + compatible = "sitronix,st1232"; + reg = <0x55>; + interrupts = <2 0>; + gpios = <&gpio1 166 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt deleted file mode 100644 index 019373253b28..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt +++ /dev/null @@ -1,28 +0,0 @@ -* Sitronix st1232 or st1633 touchscreen controller - -Required properties: -- compatible: must contain one of - * "sitronix,st1232" - * "sitronix,st1633" -- reg: I2C address of the chip -- interrupts: interrupt to which the chip is connected - -Optional properties: -- gpios: a phandle to the reset GPIO - -For additional optional properties see: touchscreen.txt - -Example: - - i2c@00000000 { - /* ... */ - - touchscreen@55 { - compatible = "sitronix,st1232"; - reg = <0x55>; - interrupts = <2 0>; - gpios = <&gpio1 166 0>; - }; - - /* ... */ - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml index 046ace461cc9..4b5b212c772c 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -74,6 +74,12 @@ properties: touchscreen-y-mm: description: vertical length in mm of the touchscreen + touchscreen-x-plate-ohms: + description: Resistance of the X-plate in Ohms + + touchscreen-y-plate-ohms: + description: Resistance of the Y-plate in Ohms + dependencies: touchscreen-size-x: [ touchscreen-size-y ] touchscreen-size-y: [ touchscreen-size-x ] diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index cb6498108b78..5accc0d113be 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -37,6 +37,18 @@ properties: - qcom,sc7180-npu-noc - qcom,sc7180-qup-virt - qcom,sc7180-system-noc + - qcom,sc7280-aggre1-noc + - qcom,sc7280-aggre2-noc + - qcom,sc7280-clk-virt + - qcom,sc7280-cnoc2 + - qcom,sc7280-cnoc3 + - qcom,sc7280-dc-noc + - qcom,sc7280-gem-noc + - qcom,sc7280-lpass-ag-noc + - qcom,sc7280-mc-virt + - qcom,sc7280-mmss-noc + - qcom,sc7280-nsp-noc + - qcom,sc7280-system-noc - qcom,sdm845-aggre1-noc - qcom,sdm845-aggre2-noc - qcom,sdm845-config-noc @@ -92,7 +104,6 @@ properties: this interconnect to send RPMh commands. qcom,bcm-voter-names: - $ref: /schemas/types.yaml#/definitions/string-array description: | Names for each of the qcom,bcm-voters specified. diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 1ecd1831cf02..c84f9fe7f254 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -145,6 +145,19 @@ properties: required: - affinity + clocks: + maxItems: 1 + + clock-names: + items: + - const: aclk + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + dependencies: mbi-ranges: [ msi-controller ] msi-controller: [ mbi-ranges ] diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt deleted file mode 100644 index dd527216c5fb..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt +++ /dev/null @@ -1,41 +0,0 @@ -* ARM Vectored Interrupt Controller - -One or more Vectored Interrupt Controllers (VIC's) can be connected in an ARM -system for interrupt routing. For multiple controllers they can either be -nested or have the outputs wire-OR'd together. - -Required properties: - -- compatible : should be one of - "arm,pl190-vic" - "arm,pl192-vic" -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : The number of cells to define the interrupts. Must be 1 as - the VIC has no configuration options for interrupt sources. The cell is a u32 - and defines the interrupt number. -- reg : The register bank for the VIC. - -Optional properties: - -- interrupts : Interrupt source for parent controllers if the VIC is nested. -- valid-mask : A one cell big bit mask of valid interrupt sources. Each bit - represents single interrupt source, starting from source 0 at LSb and ending - at source 31 at MSb. A bit that is set means that the source is wired and - clear means otherwise. If unspecified, defaults to all valid. -- valid-wakeup-mask : A one cell big bit mask of interrupt sources that can be - configured as wake up source for the system. Order of bits is the same as for - valid-mask property. A set bit means that this interrupt source can be - configured as a wake up source for the system. If unspecied, defaults to all - interrupt sources configurable as wake up sources. - -Example: - - vic0: interrupt-controller@60000 { - compatible = "arm,pl192-vic"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x60000 0x1000>; - - valid-mask = <0xffffff7f>; - valid-wakeup-mask = <0x0000ff7f>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml new file mode 100644 index 000000000000..0075e72fe8c1 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/arm,vic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Vectored Interrupt Controller + +maintainers: + - Rob Herring <robh@kernel.org> + +description: |+ + One or more Vectored Interrupt Controllers (VIC's) can be connected in an + ARM system for interrupt routing. For multiple controllers they can either + be nested or have the outputs wire-OR'd together. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + enum: + - arm,pl190-vic + - arm,pl192-vic + - arm,versatile-vic + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + description: + The number of cells to define the interrupts. It must be 1 as the + VIC has no configuration options for interrupt sources. The single + cell defines the interrupt number. + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + valid-mask: + description: + A one cell big bit mask of valid interrupt sources. Each bit + represents single interrupt source, starting from source 0 at + LSb and ending at source 31 at MSb. A bit that is set means + that the source is wired and clear means otherwise. If unspecified, + defaults to all valid. + $ref: /schemas/types.yaml#/definitions/uint32 + + valid-wakeup-mask: + description: + A one cell big bit mask of interrupt sources that can be configured + as wake up source for the system. Order of bits is the same as for + valid-mask property. A set bit means that this interrupt source + can be configured as a wake up source for the system. If unspecied, + defaults to all interrupt sources configurable as wake up sources. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + // PL192 VIC + vic0: interrupt-controller@60000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x60000 0x1000>; + + valid-mask = <0xffffff7f>; + valid-wakeup-mask = <0x0000ff7f>; + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml index 3b11a1a15398..bcb5e20fa9ca 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml @@ -35,7 +35,6 @@ properties: - description: output interrupt 6 - description: output interrupt 7 minItems: 1 - maxItems: 8 clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml index 067165c4b836..edf26452dc72 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -50,7 +50,6 @@ properties: - const: int2 - const: int3 minItems: 1 - maxItems: 4 '#interrupt-cells': const: 2 diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml index b67b8cbd33fc..abb22db3bb28 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml @@ -29,6 +29,7 @@ properties: - renesas,intc-ex-r8a774c0 # RZ/G2E - renesas,intc-ex-r8a7795 # R-Car H3 - renesas,intc-ex-r8a7796 # R-Car M3-W + - renesas,intc-ex-r8a77961 # R-Car M3-W+ - renesas,intc-ex-r8a77965 # R-Car M3-N - renesas,intc-ex-r8a77970 # R-Car V3M - renesas,intc-ex-r8a77980 # R-Car V3H diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml index 9731dd4421a1..051beb45d998 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml @@ -134,7 +134,7 @@ examples: /* AM4376 PRU-ICSS */ #include <dt-bindings/interrupt-controller/arm-gic.h> pruss@0 { - compatible = "ti,am4376-pruss"; + compatible = "ti,am4376-pruss1"; reg = <0x0 0x40000>; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml index 5951c6f98c74..e87bfbcc6913 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml @@ -38,7 +38,6 @@ properties: If provided, then the combined interrupt will be used in preference to any others. - minItems: 2 - maxItems: 4 items: - const: eventq # Event Queue not empty - const: gerror # Global Error activated diff --git a/Documentation/devicetree/bindings/iommu/iommu.txt b/Documentation/devicetree/bindings/iommu/iommu.txt index 3c36334e4f94..26ba9e530f13 100644 --- a/Documentation/devicetree/bindings/iommu/iommu.txt +++ b/Documentation/devicetree/bindings/iommu/iommu.txt @@ -92,6 +92,24 @@ Optional properties: tagging DMA transactions with an address space identifier. By default, this is 0, which means that the device only has one address space. +- dma-can-stall: When present, the master can wait for a transaction to + complete for an indefinite amount of time. Upon translation fault some + IOMMUs, instead of aborting the translation immediately, may first + notify the driver and keep the transaction in flight. This allows the OS + to inspect the fault and, for example, make physical pages resident + before updating the mappings and completing the transaction. Such IOMMU + accepts a limited number of simultaneous stalled transactions before + having to either put back-pressure on the master, or abort new faulting + transactions. + + Firmware has to opt-in stalling, because most buses and masters don't + support it. In particular it isn't compatible with PCI, where + transactions have to complete before a time limit. More generally it + won't work in systems and masters that haven't been designed for + stalling. For example the OS, in order to handle a stalled transaction, + may attempt to retrieve pages from secondary storage in a stalled + domain, leading to a deadlock. + Notes: ====== diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml index dda44976acc1..02c69a95c332 100644 --- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml +++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml @@ -49,7 +49,6 @@ properties: interrupts: minItems: 1 - maxItems: 2 description: Specifiers for the MMU fault interrupts. Not required for cache IPMMUs. items: diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt deleted file mode 100644 index 6ecefea1c6f9..000000000000 --- a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt +++ /dev/null @@ -1,38 +0,0 @@ -Rockchip IOMMU -============== - -A Rockchip DRM iommu translates io virtual addresses to physical addresses for -its master device. Each slave device is bound to a single master device, and -shares its clocks, power domain and irq. - -Required properties: -- compatible : Should be "rockchip,iommu" -- reg : Address space for the configuration registers -- interrupts : Interrupt specifier for the IOMMU instance -- interrupt-names : Interrupt name for the IOMMU instance -- #iommu-cells : Should be <0>. This indicates the iommu is a - "single-master" device, and needs no additional information - to associate with its master device. See: - Documentation/devicetree/bindings/iommu/iommu.txt -- clocks : A list of clocks required for the IOMMU to be accessible by - the host CPU. -- clock-names : Should contain the following: - "iface" - Main peripheral bus clock (PCLK/HCL) (required) - "aclk" - AXI bus clock (required) - -Optional properties: -- rockchip,disable-mmu-reset : Don't use the mmu reset operation. - Some mmu instances may produce unexpected results - when the reset operation is used. - -Example: - - vopl_mmu: iommu@ff940300 { - compatible = "rockchip,iommu"; - reg = <0xff940300 0x100>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vopl_mmu"; - clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; - clock-names = "aclk", "iface"; - #iommu-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml new file mode 100644 index 000000000000..d2e28a9e3545 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/rockchip,iommu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip IOMMU + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +description: |+ + A Rockchip DRM iommu translates io virtual addresses to physical addresses for + its master device. Each slave device is bound to a single master device and + shares its clocks, power domain and irq. + + For information on assigning IOMMU controller to its peripheral devices, + see generic IOMMU bindings. + +properties: + compatible: + enum: + - rockchip,iommu + - rockchip,rk3568-iommu + + reg: + items: + - description: configuration registers for MMU instance 0 + - description: configuration registers for MMU instance 1 + minItems: 1 + maxItems: 2 + + interrupts: + items: + - description: interruption for MMU instance 0 + - description: interruption for MMU instance 1 + minItems: 1 + maxItems: 2 + + clocks: + items: + - description: Core clock + - description: Interface clock + + clock-names: + items: + - const: aclk + - const: iface + + "#iommu-cells": + const: 0 + + power-domains: + maxItems: 1 + + rockchip,disable-mmu-reset: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Do not use the mmu reset operation. + Some mmu instances may produce unexpected results + when the reset operation is used. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - "#iommu-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + vopl_mmu: iommu@ff940300 { + compatible = "rockchip,iommu"; + reg = <0xff940300 0x100>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml new file mode 100644 index 000000000000..4ff6fabfcb30 --- /dev/null +++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED BMC KCS Devices + +maintainers: + - Andrew Jeffery <andrew@aj.id.au> + +description: | + The Aspeed BMC SoCs typically use the Keyboard-Controller-Style (KCS) + interfaces on the LPC bus for in-band IPMI communication with their host. + +properties: + compatible: + oneOf: + - description: Channel ID derived from reg + items: + enum: + - aspeed,ast2400-kcs-bmc-v2 + - aspeed,ast2500-kcs-bmc-v2 + - aspeed,ast2600-kcs-bmc + + - description: Old-style with explicit channel ID, no reg + deprecated: true + items: + enum: + - aspeed,ast2400-kcs-bmc + - aspeed,ast2500-kcs-bmc + + interrupts: + maxItems: 1 + + reg: + # maxItems: 3 + items: + - description: IDR register + - description: ODR register + - description: STR register + + aspeed,lpc-io-reg: + $ref: '/schemas/types.yaml#/definitions/uint32-array' + minItems: 1 + maxItems: 2 + description: | + The host CPU LPC IO data and status addresses for the device. For most + channels the status address is derived from the data address, but the + status address may be optionally provided. + + aspeed,lpc-interrupts: + $ref: "/schemas/types.yaml#/definitions/uint32-array" + minItems: 2 + maxItems: 2 + description: | + A 2-cell property expressing the LPC SerIRQ number and the interrupt + level/sense encoding (specified in the standard fashion). + + Note that the generated interrupt is issued from the BMC to the host, and + thus the target interrupt controller is not captured by the BMC's + devicetree. + + kcs_chan: + deprecated: true + $ref: '/schemas/types.yaml#/definitions/uint32' + description: The LPC channel number in the controller + + kcs_addr: + deprecated: true + $ref: '/schemas/types.yaml#/definitions/uint32' + description: The host CPU IO map address + +required: + - compatible + - interrupts + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - aspeed,ast2400-kcs-bmc + - aspeed,ast2500-kcs-bmc + then: + required: + - kcs_chan + - kcs_addr + else: + required: + - reg + - aspeed,lpc-io-reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + kcs3: kcs@24 { + compatible = "aspeed,ast2600-kcs-bmc"; + reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupts = <8>; + }; diff --git a/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt deleted file mode 100644 index 193e71ca96b0..000000000000 --- a/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt +++ /dev/null @@ -1,33 +0,0 @@ -# Aspeed KCS (Keyboard Controller Style) IPMI interface - -The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs -(Baseboard Management Controllers) and the KCS interface can be -used to perform in-band IPMI communication with their host. - -## v1 -Required properties: -- compatible : should be one of - "aspeed,ast2400-kcs-bmc" - "aspeed,ast2500-kcs-bmc" -- interrupts : interrupt generated by the controller -- kcs_chan : The LPC channel number in the controller -- kcs_addr : The host CPU IO map address - -## v2 -Required properties: -- compatible : should be one of - "aspeed,ast2400-kcs-bmc-v2" - "aspeed,ast2500-kcs-bmc-v2" -- reg : The address and size of the IDR, ODR and STR registers -- interrupts : interrupt generated by the controller -- aspeed,lpc-io-reg : The host CPU LPC IO address for the device - -Example: - - kcs3: kcs@24 { - compatible = "aspeed,ast2500-kcs-bmc-v2"; - reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; - aspeed,lpc-reg = <0xca2>; - interrupts = <8>; - status = "okay"; - }; diff --git a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml new file mode 100644 index 000000000000..e0ac68694b63 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/richtek,rt4831-backlight.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4831 Backlight + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + RT4831 is a mutifunctional device that can provide power to the LCD display + and LCD backlight. + + For the LCD backlight, it can provide four channel WLED driving capability. + Each channel driving current is up to 30mA + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf + +allOf: + - $ref: common.yaml# + +properties: + compatible: + const: richtek,rt4831-backlight + + default-brightness: + minimum: 0 + maximum: 2048 + + max-brightness: + minimum: 0 + maximum: 2048 + + richtek,pwm-enable: + description: | + Specify the backlight dimming following by PWM duty or by SW control. + type: boolean + + richtek,bled-ovp-sel: + description: | + Backlight OVP level selection, currently support 17V/21V/25V/29V. + $ref: /schemas/types.yaml#/definitions/uint8 + default: 1 + minimum: 0 + maximum: 3 + + richtek,channel-use: + description: | + Backlight LED channel to be used. + BIT 0/1/2/3 is used to indicate led channel 1/2/3/4 enable or disable. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 15 + +required: + - compatible + - richtek,channel-use + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt index ccebce597f37..a555d94084b7 100644 --- a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt +++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt @@ -4,8 +4,8 @@ This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268. In these SoCs it's possible to control LEDs both as GPIOs or by hardware. However, on some devices there are Serial LEDs (LEDs connected to a 74x164 controller), which can either be controlled by software (exporting the 74x164 -as spi-gpio. See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or -by hardware using this driver. +as spi-gpio. See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), +or by hardware using this driver. Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and exporting the 74x164 as spi-gpio prevents those LEDs to be hardware controlled, so the only chance to keep them working is by using this driver. diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt index da5708e7b43b..6e51c6b91ee5 100644 --- a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt +++ b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt @@ -3,7 +3,7 @@ LEDs connected to Broadcom BCM6358 controller This controller is present on BCM6358 and BCM6368. In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller), which can either be controlled by software (exporting the 74x164 as spi-gpio. -See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or +See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or by hardware using this driver. Required properties: diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml index d07eb00b97c8..bd49c201477d 100644 --- a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml +++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml @@ -101,11 +101,19 @@ examples: clocks = <&clock 0 2 1>; clock-names = "apb_pclk"; }; + }; - mhu_client_scb: scb@2e000000 { - compatible = "fujitsu,mb86s70-scb-1.0"; - reg = <0 0x2e000000 0 0x4000>; + firmware { + scpi { + compatible = "arm,scpi"; mboxes = <&mhuA 1>; /* HP-NonSecure */ + shmem = <&cpu_scp_hpri>; /* HP-NonSecure */ + + scpi_devpd: power-controller { + compatible = "arm,scpi-power-domains"; + num-domains = <2>; + #power-domain-cells = <1>; + }; }; }; @@ -125,10 +133,36 @@ examples: clocks = <&clock 0 2 1>; clock-names = "apb_pclk"; }; + }; - mhu_client_scpi: scpi@2f000000 { - compatible = "arm,scpi"; - reg = <0 0x2f000000 0 0x200>; - mboxes = <&mhuB 1 4>; /* HP-NonSecure, 5th doorbell */ + firmware { + scmi { + compatible = "arm,scmi"; + mboxes = <&mhuB 0 0>, /* LP-NonSecure, 1st doorbell */ + <&mhuB 0 1>; /* LP-NonSecure, 2nd doorbell */ + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_lpri0>, + <&cpu_scp_lpri1>; + + #address-cells = <1>; + #size-cells = <0>; + + scmi_devpd: protocol@11 { + reg = <0x11>; + #power-domain-cells = <1>; + }; + + scmi_dvfs: protocol@13 { + reg = <0x13>; + #clock-cells = <1>; + + mboxes = <&mhuB 1 2>, /* HP-NonSecure, 3rd doorbell */ + <&mhuB 1 3>; /* HP-NonSecure, 4th doorbell */ + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_hpri0>, + <&cpu_scp_hpri1>; + }; }; }; + +... diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml index 6608545ea66f..a4f1fe63659a 100644 --- a/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml +++ b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml @@ -192,18 +192,17 @@ examples: arm,mhuv2-protocols = <1 1>, <1 7>, <0 2>; }; - mhu_client: scb@2e000000 { - compatible = "fujitsu,mb86s70-scb-1.0"; - reg = <0 0x2e000000 0 0x4000>; - - mboxes = - //data-transfer protocol with 5 windows, mhu-tx - <&mhu_tx 2 0>, - //data-transfer protocol with 7 windows, mhu-tx - <&mhu_tx 3 0>, - //doorbell protocol channel 4, doorbell 27, mhu-tx - <&mhu_tx 4 27>, - //data-transfer protocol with 1 window, mhu-rx - <&mhu_rx 0 0>; + mhu_client: dsp@596e8000 { + compatible = "fsl,imx8qxp-dsp"; + reg = <0 0x596e8000 0 0x88000>; + clocks = <&adma_lpcg 0>, <&adma_lpcg 1>, <&adma_lpcg 2>; + clock-names = "ipg", "ocram", "core"; + power-domains = <&pd 0>, <&pd 1>, <&pd 2>, <&pd 3>; + mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1"; + mboxes = <&mhu_tx 2 0>, //data-transfer protocol with 5 windows, mhu-tx + <&mhu_tx 3 0>, //data-transfer protocol with 7 windows, mhu-tx + <&mhu_rx 2 27>, //doorbell protocol channel 2, doorbell 27, mhu-rx + <&mhu_rx 0 0>; //data-transfer protocol with 1 window, mhu-rx + memory-region = <&dsp_reserved>; }; }; diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml index 1a3dff277e2b..675ad9de15bb 100644 --- a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml +++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml @@ -26,6 +26,7 @@ properties: oneOf: - const: fsl,imx6sx-mu - const: fsl,imx7ulp-mu + - const: fsl,imx8ulp-mu - const: fsl,imx8-mu-scu - items: - enum: diff --git a/Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml new file mode 100644 index 000000000000..bbb173ea483c --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mailbox/microchip,polarfire-soc-mailbox.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) mailbox controller + +maintainers: + - Conor Dooley <conor.dooley@microchip.com> + +properties: + compatible: + const: microchip,polarfire-soc-mailbox + + reg: + items: + - description: mailbox data registers + - description: mailbox interrupt registers + + interrupts: + maxItems: 1 + + "#mbox-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + mbox: mailbox@37020000 { + compatible = "microchip,polarfire-soc-mailbox"; + reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318c 0x0 0x40>; + interrupt-parent = <&L1>; + interrupts = <96>; + #mbox-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt b/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt deleted file mode 100644 index 12371f5c6cd9..000000000000 --- a/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt +++ /dev/null @@ -1,184 +0,0 @@ -OMAP2+ and K3 Mailbox -===================== - -The OMAP mailbox hardware facilitates communication between different processors -using a queued mailbox interrupt mechanism. The IP block is external to the -various processor subsystems and is connected on an interconnect bus. The -communication is achieved through a set of registers for message storage and -interrupt configuration registers. - -Each mailbox IP block/cluster has a certain number of h/w fifo queues and output -interrupt lines. An output interrupt line is routed to an interrupt controller -within a processor subsystem, and there can be more than one line going to a -specific processor's interrupt controller. The interrupt line connections are -fixed for an instance and are dictated by the IP integration into the SoC -(excluding the SoCs that have a Interrupt Crossbar IP). Each interrupt line is -programmable through a set of interrupt configuration registers, and have a rx -and tx interrupt source per h/w fifo. Communication between different processors -is achieved through the appropriate programming of the rx and tx interrupt -sources on the appropriate interrupt lines. - -The number of h/w fifo queues and interrupt lines dictate the usable registers. -All the current OMAP SoCs except for the newest DRA7xx SoC has a single IP -instance. DRA7xx has multiple instances with different number of h/w fifo queues -and interrupt lines between different instances. The interrupt lines can also be -routed to different processor sub-systems on DRA7xx as they are routed through -the Crossbar, a kind of interrupt router/multiplexer. The K3 AM65x and J721E -SoCs has each of these instances form a cluster and combine multiple clusters -into a single IP block present within the Main NavSS. The interrupt lines from -all these clusters are multiplexed and routed to different processor subsystems -over a limited number of common interrupt output lines of an Interrupt Router. -The AM64x SoCS also uses a single IP block comprising of multiple clusters, -but the number of clusters are smaller, and the interrupt output lines are -connected directly to various processors. - -Mailbox Device Node: -==================== -A Mailbox device node is used to represent a Mailbox IP instance/cluster within -a SoC. The sub-mailboxes are represented as child nodes of this parent node. - -Required properties: --------------------- -- compatible: Should be one of the following, - "ti,omap2-mailbox" for OMAP2420, OMAP2430 SoCs - "ti,omap3-mailbox" for OMAP3430, OMAP3630 SoCs - "ti,omap4-mailbox" for OMAP44xx, OMAP54xx, AM33xx, - AM43xx and DRA7xx SoCs - "ti,am654-mailbox" for K3 AM65x and J721E SoCs - "ti,am64-mailbox" for K3 AM64x SoCs -- reg: Contains the mailbox register address range (base - address and length) -- interrupts: Contains the interrupt information for the mailbox - device. The format is dependent on which interrupt - controller the Mailbox device uses -- #mbox-cells: Common mailbox binding property to identify the number - of cells required for the mailbox specifier. Should be - 1 -- ti,mbox-num-users: Number of targets (processor devices) that the mailbox - device can interrupt -- ti,mbox-num-fifos: Number of h/w fifo queues within the mailbox IP block - -SoC-specific Required properties: ---------------------------------- -The following are mandatory properties for the OMAP architecture based SoCs -only: -- ti,hwmods: Name of the hwmod associated with the mailbox. This - should be defined in the mailbox node only if the node - is not defined as a child node of a corresponding sysc - interconnect node. - -The following are mandatory properties for the K3 AM65x and J721E SoCs only: -- interrupt-parent: Should contain a phandle to the TI-SCI interrupt - controller node that is used to dynamically program - the interrupt routes between the IP and the main GIC - controllers. See the following binding for additional - details, - Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml - -Child Nodes: -============ -A child node is used for representing the actual sub-mailbox device that is -used for the communication between the host processor and a remote processor. -Each child node should have a unique node name across all the different -mailbox device nodes. - -Required properties: --------------------- -- ti,mbox-tx: sub-mailbox descriptor property defining a Tx fifo -- ti,mbox-rx: sub-mailbox descriptor property defining a Rx fifo - -Sub-mailbox Descriptor Data ---------------------------- -Each of the above ti,mbox-tx and ti,mbox-rx properties should have 3 cells of -data that represent the following: - Cell #1 (fifo_id) - mailbox fifo id used either for transmitting - (ti,mbox-tx) or for receiving (ti,mbox-rx) - Cell #2 (irq_id) - irq identifier index number to use from the parent's - interrupts data. Should be 0 for most of the cases, a - positive index value is seen only on mailboxes that have - multiple interrupt lines connected to the MPU processor. - Cell #3 (usr_id) - mailbox user id for identifying the interrupt line - associated with generating a tx/rx fifo interrupt. - -Optional Properties: --------------------- -- ti,mbox-send-noirq: Quirk flag to allow the client user of this sub-mailbox - to send messages without triggering a Tx ready interrupt, - and to control the Tx ticker. Should be used only on - sub-mailboxes used to communicate with WkupM3 remote - processor on AM33xx/AM43xx SoCs. - -Mailbox Users: -============== -A device needing to communicate with a target processor device should specify -them using the common mailbox binding properties, "mboxes" and the optional -"mbox-names" (please see Documentation/devicetree/bindings/mailbox/mailbox.txt -for details). Each value of the mboxes property should contain a phandle to the -mailbox controller device node and an args specifier that will be the phandle to -the intended sub-mailbox child node to be used for communication. The equivalent -"mbox-names" property value can be used to give a name to the communication channel -to be used by the client user. - - -Example: --------- - -1. /* OMAP4 */ -mailbox: mailbox@4a0f4000 { - compatible = "ti,omap4-mailbox"; - reg = <0x4a0f4000 0x200>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox"; - #mbox-cells = <1>; - ti,mbox-num-users = <3>; - ti,mbox-num-fifos = <8>; - mbox_ipu: mbox_ipu { - ti,mbox-tx = <0 0 0>; - ti,mbox-rx = <1 0 0>; - }; - mbox_dsp: mbox_dsp { - ti,mbox-tx = <3 0 0>; - ti,mbox-rx = <2 0 0>; - }; -}; - -dsp { - ... - mboxes = <&mailbox &mbox_dsp>; - ... -}; - -2. /* AM33xx */ -mailbox: mailbox@480c8000 { - compatible = "ti,omap4-mailbox"; - reg = <0x480C8000 0x200>; - interrupts = <77>; - ti,hwmods = "mailbox"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <8>; - mbox_wkupm3: wkup_m3 { - ti,mbox-tx = <0 0 0>; - ti,mbox-rx = <0 0 3>; - }; -}; - -3. /* AM65x */ -&cbass_main { - cbass_main_navss: interconnect0 { - mailbox0_cluster0: mailbox@31f80000 { - compatible = "ti,am654-mailbox"; - reg = <0x00 0x31f80000 0x00 0x200>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - interrupt-parent = <&intr_main_navss>; - interrupts = <164 0>; - - mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { - ti,mbox-tx = <1 0 0>; - ti,mbox-rx = <0 0 0>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml index 5dc1173d03fd..8878ec00820e 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml @@ -19,6 +19,7 @@ properties: - qcom,ipq6018-apcs-apps-global - qcom,ipq8074-apcs-apps-global - qcom,msm8916-apcs-kpss-global + - qcom,msm8939-apcs-kpss-global - qcom,msm8994-apcs-kpss-global - qcom,msm8996-apcs-hmss-global - qcom,msm8998-apcs-hmss-global @@ -27,6 +28,7 @@ properties: - qcom,sc8180x-apss-shared - qcom,sdm660-apcs-hmss-global - qcom,sdm845-apss-shared + - qcom,sm6125-apcs-hmss-global - qcom,sm8150-apss-shared reg: @@ -75,6 +77,7 @@ allOf: - qcom,sc7180-apss-shared - qcom,sdm660-apcs-hmss-global - qcom,sdm845-apss-shared + - qcom,sm6125-apcs-hmss-global - qcom,sm8150-apss-shared then: properties: diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml index 3b7ab61a144f..b15da9ba90b2 100644 --- a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml @@ -32,7 +32,6 @@ properties: - description: tx channel free - description: wakeup source minItems: 2 - maxItems: 3 interrupt-names: items: @@ -40,7 +39,6 @@ properties: - const: tx - const: wakeup minItems: 2 - maxItems: 3 wakeup-source: true diff --git a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml new file mode 100644 index 000000000000..e864d798168d --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml @@ -0,0 +1,308 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/ti,omap-mailbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI OMAP2+ and K3 Mailbox devices + +maintainers: + - Suman Anna <s-anna@ti.com> + +description: | + The OMAP Mailbox hardware facilitates communication between different + processors using a queued mailbox interrupt mechanism. The IP block is + external to the various processor subsystems and is connected on an + interconnect bus. The communication is achieved through a set of registers + for message storage and interrupt configuration registers. + + Each mailbox IP block/cluster has a certain number of h/w fifo queues and + output interrupt lines. An output interrupt line is routed to an interrupt + controller within a processor subsystem, and there can be more than one line + going to a specific processor's interrupt controller. The interrupt line + connections are fixed for an instance and are dictated by the IP integration + into the SoC (excluding the SoCs that have an Interrupt Crossbar or an + Interrupt Router IP). Each interrupt line is programmable through a set of + interrupt configuration registers, and have a rx and tx interrupt source per + h/w fifo. Communication between different processors is achieved through the + appropriate programming of the rx and tx interrupt sources on the appropriate + interrupt lines. + + The number of h/w fifo queues and interrupt lines dictate the usable + registers. All the current OMAP SoCs except for the newest DRA7xx SoC has a + single IP instance. DRA7xx has multiple instances with different number of + h/w fifo queues and interrupt lines between different instances. The interrupt + lines can also be routed to different processor sub-systems on DRA7xx as they + are routed through the Crossbar, a kind of interrupt router/multiplexer. The + K3 AM65x, J721E and J7200 SoCs has each of these instances form a cluster and + combine multiple clusters into a single IP block present within the Main + NavSS. The interrupt lines from all these clusters are multiplexed and routed + to different processor subsystems over a limited number of common interrupt + output lines of an Interrupt Router. The AM64x SoCS also uses a single IP + block comprising of multiple clusters, but the number of clusters are + smaller, and the interrupt output lines are connected directly to various + processors. + + Mailbox Controller Nodes + ========================= + A Mailbox device node is used to represent a Mailbox IP instance/cluster + within a SoC. The sub-mailboxes (actual communication channels) are + represented as child nodes of this parent node. + + Mailbox Users + ============== + A device needing to communicate with a target processor device should specify + them using the common mailbox binding properties, "mboxes" and the optional + "mbox-names" (please see Documentation/devicetree/bindings/mailbox/mailbox.txt + for details). Each value of the mboxes property should contain a phandle to + the mailbox controller device node and an args specifier that will be the + phandle to the intended sub-mailbox child node to be used for communication. + The equivalent "mbox-names" property value can be used to give a name to the + communication channel to be used by the client user. + +$defs: + omap-mbox-descriptor: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + The omap-mbox-descriptor is made of up of 3 cells and represents a single + uni-directional communication channel. A typical sub-mailbox device uses + two such channels - one for transmitting (Tx) and one for receiving (Rx). + items: + - description: + mailbox fifo id used either for transmitting on ti,mbox-tx channel or + for receiving on ti,mbox-rx channel (fifo_id). This is the hardware + fifo number within a mailbox cluster. + - description: + irq identifier index number to use from the parent's interrupts data. + Should be 0 for most of the cases, a positive index value is seen only + on mailboxes that have multiple interrupt lines connected to the MPU + processor (irq_id). This is an index number in the listed interrupts + property in the DT nodes. + - description: + mailbox user id for identifying the interrupt line associated with + generating a tx/rx fifo interrupt (usr_id). This is the hardware + user id number within a mailbox cluster. + + omap-sub-mailbox: + type: object + description: + The omap-sub-mailbox is a child node within a Mailbox controller device + node and represents the actual communication channel used to send and + receive messages between the host processor and a remote processor. Each + child node should have a unique node name across all the different mailbox + device nodes. + + properties: + ti,mbox-tx: + $ref: "#/$defs/omap-mbox-descriptor" + description: sub-mailbox descriptor property defining a Tx fifo. + + ti,mbox-rx: + $ref: "#/$defs/omap-mbox-descriptor" + description: sub-mailbox descriptor property defining a Rx fifo. + + ti,mbox-send-noirq: + type: boolean + description: + Quirk flag to allow the client user of this sub-mailbox to send + messages without triggering a Tx ready interrupt, and to control + the Tx ticker. Should be used only on sub-mailboxes used to + communicate with WkupM3 remote processor on AM33xx/AM43xx SoCs. + + required: + - ti,mbox-tx + - ti,mbox-rx + +properties: + compatible: + enum: + - ti,omap2-mailbox # for OMAP2420, OMAP2430 SoCs + - ti,omap3-mailbox # for OMAP3430, OMAP3630 SoCs + - ti,omap4-mailbox # for OMAP44xx, OMAP54xx, AM33xx, AM43xx and DRA7xx SoCs + - ti,am654-mailbox # for K3 AM65x, J721E and J7200 SoCs + - ti,am64-mailbox # for K3 AM64x SoCs + + reg: + maxItems: 1 + + interrupts: + description: + Contains the interrupt information for the mailbox device. The format is + dependent on which interrupt controller the Mailbox device uses. The + number of interrupts listed will at most be the value specified in + ti,mbox-num-users property, but is usually limited by the number of + interrupts reaching the main processor. An interrupt-parent property + is required on SoCs where the interrupt lines are connected through a + Interrupt Router before reaching the main processor's GIC. + + "#mbox-cells": + const: 1 + description: + The specifier is a phandle to an omap-sub-mailbox device. + + ti,mbox-num-users: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of targets (processor devices) that the mailbox device can + interrupt. + + ti,mbox-num-fifos: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of h/w fifo queues within the mailbox IP block. + + ti,hwmods: + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + description: + Name of the hwmod associated with the mailbox. This should be defined + in the mailbox node only if the node is not defined as a child node of + a corresponding sysc interconnect node. + + This property is only needed on some legacy OMAP SoCs which have not + yet been converted to the ti,sysc interconnect hierarachy, but is + otherwise considered obsolete. + +patternProperties: + "^mbox-[a-z0-9-]+$": + $ref: "#/$defs/omap-sub-mailbox" + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + - ti,mbox-num-users + - ti,mbox-num-fifos + +allOf: + - if: + properties: + compatible: + enum: + - ti,am654-mailbox + then: + required: + - interrupt-parent + + - if: + properties: + compatible: + enum: + - ti,am654-mailbox + - ti,am64-mailbox + then: + properties: + ti,mbox-num-users: + const: 4 + ti,mbox-num-fifos: + const: 16 + interrupts: + minItems: 1 + maxItems: 4 + + - if: + properties: + compatible: + enum: + - ti,omap4-mailbox + then: + properties: + ti,mbox-num-users: + enum: [3, 4] + ti,mbox-num-fifos: + enum: [8, 12] + interrupts: + minItems: 1 + maxItems: 4 + + - if: + properties: + compatible: + enum: + - ti,omap3-mailbox + then: + properties: + ti,mbox-num-users: + const: 2 + ti,mbox-num-fifos: + const: 2 + interrupts: + minItems: 1 + maxItems: 1 + + - if: + properties: + compatible: + enum: + - ti,omap2-mailbox + then: + properties: + ti,mbox-num-users: + const: 4 + ti,mbox-num-fifos: + const: 6 + interrupts: + minItems: 1 + maxItems: 2 + +additionalProperties: false + +examples: + - | + /* OMAP4 */ + #include <dt-bindings/interrupt-controller/arm-gic.h> + mailbox: mailbox@4a0f4000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4a0f4000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + + mbox_ipu: mbox-ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox-dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; + }; + + dsp { + mboxes = <&mailbox &mbox_dsp>; + }; + + - | + /* AM33xx */ + mailbox1: mailbox@480c8000 { + compatible = "ti,omap4-mailbox"; + reg = <0x480c8000 0x200>; + interrupts = <77>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <8>; + + mbox_wkupm3: mbox-wkup-m3 { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + ti,mbox-send-noirq; + }; + }; + + - | + /* AM65x */ + mailbox0_cluster0: mailbox@31f80000 { + compatible = "ti,am654-mailbox"; + reg = <0x31f80000 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + interrupts = <436>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-tx = <1 0 0>; + ti,mbox-rx = <0 0 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml index b902495d278b..5044c4bb94e0 100644 --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml @@ -67,7 +67,6 @@ properties: clock-names: minItems: 4 - maxItems: 5 items: - const: dos_parser - const: dos diff --git a/Documentation/devicetree/bindings/media/atmel,isc.yaml b/Documentation/devicetree/bindings/media/atmel,isc.yaml new file mode 100644 index 000000000000..3e4bb8892d94 --- /dev/null +++ b/Documentation/devicetree/bindings/media/atmel,isc.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright (C) 2016-2021 Microchip Technology, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/atmel,isc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Image Sensor Controller (ISC) + +maintainers: + - Eugen Hristev <eugen.hristev@microchip.com> + +description: | + The Image Sensor Controller (ISC) device provides the video input capabilities for the + Atmel/Microchip AT91 SAMA family of devices. + + The ISC has a single parallel input that supports RAW Bayer, RGB or YUV video, + with both external synchronization and BT.656 synchronization for the latter. + +properties: + compatible: + const: atmel,sama5d2-isc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 3 + + clock-names: + items: + - const: hclock + - const: iscck + - const: gck + + '#clock-cells': + const: 0 + + clock-output-names: + const: isc-mck + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port node, single endpoint describing the input pad. + + properties: + endpoint: + $ref: video-interfaces.yaml# + + properties: + remote-endpoint: true + + bus-width: + enum: [8, 9, 10, 11, 12] + default: 12 + + hsync-active: + enum: [0, 1] + default: 1 + + vsync-active: + enum: [0, 1] + default: 1 + + pclk-sample: + enum: [0, 1] + default: 1 + + required: + - remote-endpoint + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - clock-output-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + isc: isc@f0008000 { + compatible = "atmel,sama5d2-isc"; + reg = <0xf0008000 0x4000>; + interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&isc_clk>, <&iscck>, <&isc_gclk>; + clock-names = "hclock", "iscck", "gck"; + #clock-cells = <0>; + clock-output-names = "isc-mck"; + + port { + isc_0: endpoint { + remote-endpoint = <&ov7740_0>; + hsync-active = <1>; + vsync-active = <0>; + pclk-sample = <1>; + bus-width = <8>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/atmel-isc.txt b/Documentation/devicetree/bindings/media/atmel-isc.txt deleted file mode 100644 index bbe0e87c6188..000000000000 --- a/Documentation/devicetree/bindings/media/atmel-isc.txt +++ /dev/null @@ -1,65 +0,0 @@ -Atmel Image Sensor Controller (ISC) ----------------------------------------------- - -Required properties for ISC: -- compatible - Must be "atmel,sama5d2-isc". -- reg - Physical base address and length of the registers set for the device. -- interrupts - Should contain IRQ line for the ISC. -- clocks - List of clock specifiers, corresponding to entries in - the clock-names property; - Please refer to clock-bindings.txt. -- clock-names - Required elements: "hclock", "iscck", "gck". -- #clock-cells - Should be 0. -- clock-output-names - Should be "isc-mck". -- pinctrl-names, pinctrl-0 - Please refer to pinctrl-bindings.txt. - -ISC supports a single port node with parallel bus. It should contain one -'port' child node with child 'endpoint' node. Please refer to the bindings -defined in Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: -isc: isc@f0008000 { - compatible = "atmel,sama5d2-isc"; - reg = <0xf0008000 0x4000>; - interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&isc_clk>, <&iscck>, <&isc_gclk>; - clock-names = "hclock", "iscck", "gck"; - #clock-cells = <0>; - clock-output-names = "isc-mck"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>; - - port { - isc_0: endpoint { - remote-endpoint = <&ov7740_0>; - hsync-active = <1>; - vsync-active = <0>; - pclk-sample = <1>; - }; - }; -}; - -i2c1: i2c@fc028000 { - ov7740: camera@21 { - compatible = "ovti,ov7740"; - reg = <0x21>; - clocks = <&isc>; - clock-names = "xvclk"; - assigned-clocks = <&isc>; - assigned-clock-rates = <24000000>; - - port { - ov7740_0: endpoint { - remote-endpoint = <&isc_0>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml index bcfd93739b4f..3ce4af143a3a 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml +++ b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml @@ -36,7 +36,13 @@ properties: maxItems: 1 port: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false ports: true diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml index df634b0c1f8c..de15cebe2955 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml +++ b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml @@ -30,7 +30,6 @@ properties: reg-names: minItems: 1 - maxItems: 13 items: - const: main - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] diff --git a/Documentation/devicetree/bindings/media/i2c/imx258.yaml b/Documentation/devicetree/bindings/media/i2c/imx258.yaml index 515317eff41a..cde0f7383b2a 100644 --- a/Documentation/devicetree/bindings/media/i2c/imx258.yaml +++ b/Documentation/devicetree/bindings/media/i2c/imx258.yaml @@ -49,7 +49,7 @@ properties: # See ../video-interfaces.txt for more details port: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base additionalProperties: false properties: diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml index ee16102fdfe7..02f656e78700 100644 --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml @@ -111,17 +111,10 @@ properties: i2c-mux: type: object + $ref: /schemas/i2c/i2c-mux.yaml# + unevaluatedProperties: false description: | - Each GMSL link is modelled as a child bus of an i2c bus - multiplexer/switch, in accordance with bindings described in - Documentation/devicetree/bindings/i2c/i2c-mux.txt. - - properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 + Each GMSL link is modelled as a child bus of an i2c bus multiplexer/switch. patternProperties: "^i2c@[0-3]$": @@ -133,12 +126,6 @@ properties: channels. properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - reg: description: The index of the GMSL channel. maxItems: 1 @@ -173,10 +160,6 @@ properties: additionalProperties: false - additionalProperties: false - - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml index 9149f5685688..246dc5fec716 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml @@ -45,7 +45,7 @@ properties: port: description: MIPI CSI-2 transmitter port - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base additionalProperties: false properties: diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml index 0699c7e4fdeb..b962863e4f65 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml @@ -45,7 +45,7 @@ properties: port: description: MIPI CSI-2 transmitter port - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base additionalProperties: false properties: diff --git a/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml b/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml new file mode 100644 index 000000000000..f50e54a722eb --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/rda,rda5807.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc Communications RDA5807 FM radio receiver + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + compatible: + enum: + - rda,rda5807 + + reg: + description: I2C address. + maxItems: 1 + + power-supply: true + + rda,lnan: + description: Use LNAN input port. + type: boolean + + rda,lnap: + description: Use LNAP input port. + type: boolean + + rda,analog-out: + description: Enable analog audio output. + type: boolean + + rda,i2s-out: + description: Enable I2S digital audio output. + type: boolean + + rda,lna-microamp: + description: LNA working current, in micro-amperes. + default: 2500 + enum: [1800, 2100, 2500, 3000] + +required: + - compatible + - reg + - power-supply + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + radio@11 { + compatible = "rda,rda5807"; + reg = <0x11>; + + power-supply = <&ldo6>; + + rda,lnan; + rda,lnap; + rda,analog-out; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml index 27cc5b7ff613..f5055b9db693 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml @@ -37,7 +37,7 @@ properties: port: additionalProperties: false - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base properties: endpoint: diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml index c14c7d827b00..b39b84c5f012 100644 --- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml +++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml @@ -43,7 +43,6 @@ properties: clocks: minItems: 1 - maxItems: 3 items: - description: AXI bus interface clock - description: Peripheral clock diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt index 06db6837cefd..ad1321e5a22d 100644 --- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt @@ -9,6 +9,7 @@ Required properties: "mediatek,mt8173-vcodec-enc" for mt8173 avc encoder. "mediatek,mt8183-vcodec-enc" for MT8183 encoder. "mediatek,mt8173-vcodec-dec" for MT8173 decoder. + "mediatek,mt8192-vcodec-enc" for MT8192 encoder. - reg : Physical base address of the video codec registers and length of memory mapped region. - interrupts : interrupt number to the cpu. @@ -22,6 +23,7 @@ Required properties: - iommus : should point to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. +- dma-ranges : describes the dma address range space that the codec hw access. One of the two following nodes: - mediatek,vpu : the node of the video processor unit, if using VPU. - mediatek,scp : the node of the SCP unit, if using SCP. diff --git a/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml new file mode 100644 index 000000000000..4b77103ca913 --- /dev/null +++ b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/microchip,sama5d4-vdec.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Hantro G1 VPU codec implemented on Microchip SAMA5D4 SoCs + +maintainers: + - Emil Velikov <emil.velikov@collabora.com> + +description: + Hantro G1 video decode accelerator present on Microchip SAMA5D4 SoCs. + +properties: + compatible: + const: microchip,sama5d4-vdec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/interrupt-controller/irq.h> + + vdec0: vdec@300000 { + compatible = "microchip,sama5d4-vdec"; + reg = <0x00300000 0x100000>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; + }; diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml new file mode 100644 index 000000000000..41afe2e5f133 --- /dev/null +++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Microchip Technology, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/microchip,xisc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip eXtended Image Sensor Controller (XISC) + +maintainers: + - Eugen Hristev <eugen.hristev@microchip.com> + +description: | + The eXtended Image Sensor Controller (XISC) device provides the video input capabilities for the + Microchip AT91 SAM family of devices. + + The XISC has a single internal parallel input that supports RAW Bayer, RGB or YUV video. + The source can be either a demuxer from a CSI2 type of bus, or a simple direct bridge to a + parallel sensor. + + The XISC provides one clock output that is used to clock the demuxer/bridge. + +properties: + compatible: + const: microchip,sama7g5-isc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: hclock + + '#clock-cells': + const: 0 + + clock-output-names: + const: isc-mck + + microchip,mipi-mode: + type: boolean + description: + As the XISC is usually connected to a demux/bridge, the XISC receives + the same type of input, however, it should be aware of the type of + signals received. The mipi-mode enables different internal handling + of the data and clock lines. + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port node, single endpoint describing the input pad. + + properties: + endpoint: + $ref: video-interfaces.yaml# + + properties: + bus-type: + enum: [5, 6] + + remote-endpoint: true + + bus-width: + enum: [8, 9, 10, 11, 12] + default: 12 + + hsync-active: + enum: [0, 1] + default: 1 + + vsync-active: + enum: [0, 1] + default: 1 + + pclk-sample: + enum: [0, 1] + default: 1 + + required: + - remote-endpoint + - bus-type + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - clock-output-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/interrupt-controller/irq.h> + + xisc: xisc@e1408000 { + compatible = "microchip,sama7g5-isc"; + reg = <0xe1408000 0x2000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 56>; + clock-names = "hclock"; + #clock-cells = <0>; + clock-output-names = "isc-mck"; + + port { + xisc_in: endpoint { + bus-type = <5>; /* Parallel */ + remote-endpoint = <&csi2dc_out>; + hsync-active = <1>; + vsync-active = <1>; + bus-width = <12>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml index d8ed480482b9..7c09eec78ce5 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml @@ -4,15 +4,17 @@ $id: http://devicetree.org/schemas/media/nxp,imx7-mipi-csi2.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: NXP i.MX7 MIPI CSI-2 receiver +title: NXP i.MX7 and i.MX8 MIPI CSI-2 receiver maintainers: - Rui Miguel Silva <rmfrfs@gmail.com> + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> description: |- - The NXP i.MX7 SoC family includes a MIPI CSI-2 receiver IP core, documented - as "CSIS V3.3". The IP core seems to originate from Samsung, and may be - compatible with some of the Exynos4 ad S5P SoCs. + The NXP i.MX7 and i.MX8 families contain SoCs that include a MIPI CSI-2 + receiver IP core named CSIS. The IP core originates from Samsung, and may be + compatible with some of the Exynos4 and S5P SoCs. i.MX7 SoCs use CSIS version + 3.3, and i.MX8 SoCs use CSIS version 3.6.3. While the CSI-2 receiver is separate from the MIPI D-PHY IP core, the PHY is completely wrapped by the CSIS and doesn't expose a control interface of its @@ -20,7 +22,9 @@ description: |- properties: compatible: - const: fsl,imx7-mipi-csi2 + enum: + - fsl,imx7-mipi-csi2 + - fsl,imx8mm-mipi-csi2 reg: maxItems: 1 @@ -29,16 +33,20 @@ properties: maxItems: 1 clocks: + minItems: 3 items: - description: The peripheral clock (a.k.a. APB clock) - description: The external clock (optionally used as the pixel clock) - description: The MIPI D-PHY clock + - description: The AXI clock clock-names: + minItems: 3 items: - const: pclk - const: wrap - const: phy + - const: axi power-domains: maxItems: 1 @@ -71,16 +79,30 @@ properties: properties: data-lanes: - oneOf: - - items: - - const: 1 - - items: - - const: 1 - - const: 2 + items: + minItems: 1 + maxItems: 4 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 required: - data-lanes + allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx7-mipi-csi2 + then: + properties: + data-lanes: + items: + maxItems: 2 + port@1: $ref: /schemas/graph.yaml#/properties/port description: @@ -93,12 +115,29 @@ required: - clocks - clock-names - power-domains - - phy-supply - - resets - ports additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx7-mipi-csi2 + then: + required: + - phy-supply + - resets + else: + properties: + clocks: + minItems: 4 + clock-names: + minItems: 4 + phy-supply: false + resets: false + examples: - | #include <dt-bindings/clock/imx7d-clock.h> @@ -106,7 +145,7 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/reset/imx7-reset.h> - mipi_csi: mipi-csi@30750000 { + mipi-csi@30750000 { compatible = "fsl,imx7-mipi-csi2"; reg = <0x30750000 0x10000>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; @@ -144,4 +183,46 @@ examples: }; }; + - | + #include <dt-bindings/clock/imx8mm-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + mipi-csi@32e30000 { + compatible = "fsl,imx8mm-mipi-csi2"; + reg = <0x32e30000 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <333000000>; + clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_CSI1_ROOT>, + <&clk IMX8MM_CLK_CSI1_PHY_REF>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>; + clock-names = "pclk", "wrap", "phy", "axi"; + power-domains = <&mipi_pd>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + imx8mm_mipi_csi_in: endpoint { + remote-endpoint = <&imx477_out>; + data-lanes = <1 2 3 4>; + }; + }; + + port@1 { + reg = <1>; + + imx8mm_mipi_csi_out: endpoint { + remote-endpoint = <&csi_in>; + }; + }; + }; + }; + ... diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml index 04013e5dd044..90b4af2c9724 100644 --- a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml @@ -30,7 +30,6 @@ properties: power-domain-names: minItems: 2 - maxItems: 3 items: - const: venus - const: vcodec0 diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml index 04b9af4db191..177bf81544b1 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml @@ -30,7 +30,6 @@ properties: power-domain-names: minItems: 3 - maxItems: 4 items: - const: venus - const: vcodec0 diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml index 7b81bd7f2399..ebf8f3d866a5 100644 --- a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml @@ -30,7 +30,6 @@ properties: power-domain-names: minItems: 2 - maxItems: 3 items: - const: venus - const: vcodec0 diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml index af9e7e59e5a1..d4c541c4b164 100644 --- a/Documentation/devicetree/bindings/media/rc.yaml +++ b/Documentation/devicetree/bindings/media/rc.yaml @@ -45,6 +45,7 @@ properties: - rc-cec - rc-cinergy - rc-cinergy-1400 + - rc-ct-90405 - rc-d680-dmb - rc-delock-61959 - rc-dib0700-nec @@ -125,7 +126,6 @@ properties: - rc-snapstream-firefly - rc-streamzap - rc-su3000 - - rc-tango - rc-tanix-tx3mini - rc-tanix-tx5max - rc-tbs-nec diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml index 20396f1be999..23703b767f5b 100644 --- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml +++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml @@ -25,6 +25,7 @@ properties: - renesas,r8a774e1-csi2 # RZ/G2H - renesas,r8a7795-csi2 # R-Car H3 - renesas,r8a7796-csi2 # R-Car M3-W + - renesas,r8a77961-csi2 # R-Car M3-W+ - renesas,r8a77965-csi2 # R-Car M3-N - renesas,r8a77970-csi2 # R-Car V3M - renesas,r8a77980-csi2 # R-Car V3H diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml index f1bdaeab4053..817a6d566738 100644 --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml @@ -67,9 +67,7 @@ properties: maxItems: 1 clock-names: - maxItems: 1 - items: - - const: fck + const: fck resets: maxItems: 1 @@ -80,7 +78,6 @@ properties: dma-names: minItems: 1 - maxItems: 2 items: - const: rx - const: rx @@ -99,32 +96,26 @@ properties: Indicates that the channel acts as primary among the bonded channels. port: - type: object + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false description: - Child port node corresponding to the data input, in accordance with the - video interface bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - The port node must contain at least one endpoint. + Child port node corresponding to the data input. The port node must + contain at least one endpoint. properties: endpoint: - type: object + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false properties: - remote-endpoint: - description: - A phandle to the remote tuner endpoint subnode in remote node - port. - sync-active: + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] description: Indicates sync signal polarity, 0/1 for low/high respectively. This property maps to SYNCAC bit in the hardware manual. The default is 1 (active high). - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/media/renesas,isp.yaml b/Documentation/devicetree/bindings/media/renesas,isp.yaml new file mode 100644 index 000000000000..514857d36f6b --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,isp.yaml @@ -0,0 +1,196 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +# Copyright (C) 2021 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,isp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car ISP Channel Selector + +maintainers: + - Niklas Söderlund <niklas.soderlund@ragnatech.se> + +description: + The R-Car ISP Channel Selector provides MIPI CSI-2 VC and DT filtering + capabilities for the Renesas R-Car family of devices. It is used in + conjunction with the R-Car VIN and CSI-2 modules, which provides the video + capture capabilities. + +properties: + compatible: + items: + - enum: + - renesas,r8a779a0-isp # V3U + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port node, multiple endpoints describing the connected R-Car + CSI-2 receivers. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 0. + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 1. + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 2. + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 3. + + port@5: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 4. + + port@6: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 5. + + port@7: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 6. + + port@8: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 7. + + required: + - port@0 + - port@1 + - port@2 + - port@3 + - port@4 + - port@5 + - port@6 + - port@7 + - port@8 + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a779a0-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a779a0-sysc.h> + + isp1: isp@fed20000 { + compatible = "renesas,r8a779a0-isp"; + reg = <0xfed20000 0x10000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 613>; + power-domains = <&sysc R8A779A0_PD_A3ISP01>; + resets = <&cpg 613>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + isp1csi41: endpoint@1 { + reg = <1>; + remote-endpoint = <&csi41isp1>; + }; + }; + + port@1 { + reg = <1>; + isp1vin08: endpoint { + remote-endpoint = <&vin08isp1>; + }; + }; + + port@2 { + reg = <2>; + isp1vin09: endpoint { + remote-endpoint = <&vin09isp1>; + }; + }; + + port@3 { + reg = <3>; + isp1vin10: endpoint { + remote-endpoint = <&vin10isp1>; + }; + }; + + port@4 { + reg = <4>; + isp1vin11: endpoint { + remote-endpoint = <&vin11isp1>; + }; + }; + + port@5 { + reg = <5>; + isp1vin12: endpoint { + remote-endpoint = <&vin12isp1>; + }; + }; + + port@6 { + reg = <6>; + isp1vin13: endpoint { + remote-endpoint = <&vin13isp1>; + }; + }; + + port@7 { + reg = <7>; + isp1vin14: endpoint { + remote-endpoint = <&vin14isp1>; + }; + }; + + port@8 { + reg = <8>; + isp1vin15: endpoint { + remote-endpoint = <&vin15isp1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml index dd1a5ce5896c..c0442e79cbb4 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -46,11 +46,13 @@ properties: - renesas,vin-r8a7779 # R-Car H1 - renesas,vin-r8a7795 # R-Car H3 - renesas,vin-r8a7796 # R-Car M3-W + - renesas,vin-r8a77961 # R-Car M3-W+ - renesas,vin-r8a77965 # R-Car M3-N - renesas,vin-r8a77970 # R-Car V3M - renesas,vin-r8a77980 # R-Car V3H - renesas,vin-r8a77990 # R-Car E3 - renesas,vin-r8a77995 # R-Car D3 + - renesas,vin-r8a779a0 # R-Car V3U reg: maxItems: 1 @@ -111,14 +113,15 @@ properties: description: VIN channel number $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 - maximum: 15 + maximum: 31 ports: $ref: /schemas/graph.yaml#/properties/ports properties: port@0: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Input port node, single endpoint describing a parallel input source. @@ -187,6 +190,29 @@ properties: - required: - endpoint@3 + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port node, multiple endpoints describing all the R-Car ISP + modules connected the VIN. + + properties: + endpoint@0: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Endpoint connected to ISP0. + + endpoint@1: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Endpoint connected to ISP1. + + endpoint@2: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Endpoint connected to ISP2. + + endpoint@3: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Endpoint connected to ISP3. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml index 8d35c327018b..089f11d21b25 100644 --- a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml +++ b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml @@ -15,7 +15,11 @@ description: |- properties: compatible: - const: rockchip,rk3399-vdec + oneOf: + - const: rockchip,rk3399-vdec + - items: + - const: rockchip,rk3228-vdec + - const: rockchip,rk3399-vdec reg: maxItems: 1 @@ -37,6 +41,10 @@ properties: - const: cabac - const: core + assigned-clocks: true + + assigned-clock-rates: true + power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml index c81dbc3e8960..b88172a59de7 100644 --- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml +++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml @@ -15,10 +15,19 @@ description: properties: compatible: - enum: - - rockchip,rk3288-vpu - - rockchip,rk3328-vpu - - rockchip,rk3399-vpu + oneOf: + - enum: + - rockchip,rk3036-vpu + - rockchip,rk3066-vpu + - rockchip,rk3288-vpu + - rockchip,rk3328-vpu + - rockchip,rk3399-vpu + - items: + - const: rockchip,rk3188-vpu + - const: rockchip,rk3066-vpu + - items: + - const: rockchip,rk3228-vpu + - const: rockchip,rk3399-vpu reg: maxItems: 1 @@ -35,12 +44,20 @@ properties: - const: vdpu clocks: - maxItems: 2 + oneOf: + - maxItems: 2 + - maxItems: 4 clock-names: - items: - - const: aclk - - const: hclk + oneOf: + - items: + - const: aclk + - const: hclk + - items: + - const: aclk_vdpu + - const: hclk_vdpu + - const: aclk_vepu + - const: hclk_vepu power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/tango-ir.txt b/Documentation/devicetree/bindings/media/tango-ir.txt deleted file mode 100644 index a9f00c2bf897..000000000000 --- a/Documentation/devicetree/bindings/media/tango-ir.txt +++ /dev/null @@ -1,21 +0,0 @@ -Sigma Designs Tango IR NEC/RC-5/RC-6 decoder (SMP86xx and SMP87xx) - -Required properties: - -- compatible: "sigma,smp8642-ir" -- reg: address/size of NEC+RC5 area, address/size of RC6 area -- interrupts: spec for IR IRQ -- clocks: spec for IR clock (typically the crystal oscillator) - -Optional properties: - -- linux,rc-map-name: see Documentation/devicetree/bindings/media/rc.txt - -Example: - - ir@10518 { - compatible = "sigma,smp8642-ir"; - reg = <0x10518 0x18>, <0x105e0 0x1c>; - interrupts = <21 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; - }; diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml b/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml new file mode 100644 index 000000000000..7a63c85ef8c5 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/arm,pl353-smc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM PL353 Static Memory Controller (SMC) device-tree bindings + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + - Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> + +description: + The PL353 Static Memory Controller is a bus where you can connect two kinds + of memory interfaces, which are NAND and memory mapped interfaces (such as + SRAM or NOR). + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + const: arm,pl353-smc-r2p1 + required: + - compatible + +properties: + $nodename: + pattern: "^memory-controller@[0-9a-f]+$" + + compatible: + items: + - const: arm,pl353-smc-r2p1 + - const: arm,primecell + + "#address-cells": + const: 2 + + "#size-cells": + const: 1 + + reg: + items: + - description: + Configuration registers for the host and sub-controllers. + The three chip select regions are defined in 'ranges'. + + clocks: + items: + - description: clock for the memory device bus + - description: main clock of the SMC + + clock-names: + items: + - const: memclk + - const: apb_pclk + + ranges: + minItems: 1 + maxItems: 3 + description: | + Memory bus areas for interacting with the devices. Reflects + the memory layout with four integer values following: + <cs-number> 0 <offset> <size> + items: + - description: NAND bank 0 + - description: NOR/SRAM bank 0 + - description: NOR/SRAM bank 1 + + interrupts: true + +patternProperties: + "@[0-3],[a-f0-9]+$": + type: object + description: | + The child device node represents the controller connected to the SMC + bus. The controller can be a NAND controller or a pair of any memory + mapped controllers such as NOR and SRAM controllers. + + properties: + compatible: + description: + Compatible of memory controller. + + reg: + items: + - items: + - description: | + Chip-select ID, as in the parent range property. + minimum: 0 + maximum: 2 + - description: | + Offset of the memory region requested by the device. + - description: | + Length of the memory region requested by the device. + + required: + - compatible + - reg + +required: + - compatible + - reg + - clock-names + - clocks + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + smcc: memory-controller@e000e000 { + compatible = "arm,pl353-smc-r2p1", "arm,primecell"; + reg = <0xe000e000 0x0001000>; + clock-names = "memclk", "apb_pclk"; + clocks = <&clkc 11>, <&clkc 44>; + ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */ + 0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */ + 0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */ + #address-cells = <2>; + #size-cells = <1>; + + nfc0: nand-controller@0,0 { + compatible = "arm,pl353-nand-r2p1"; + reg = <0 0 0x1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml index a08a32340987..e87e4382807c 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml @@ -53,14 +53,12 @@ properties: apb and smi are mandatory. the async is only for generation 1 smi HW. gals(global async local sync) also is optional, see below. minItems: 2 - maxItems: 4 items: - description: apb is Advanced Peripheral Bus clock, It's the clock for setting the register. - description: smi is the clock for transfer data and command. - - description: async is asynchronous clock, it help transform the smi - clock into the emi clock domain. - - description: gals0 is the path0 clock of gals. + - description: Either asynchronous clock to help transform the smi clock + into the emi clock domain on Gen1 h/w, or the path0 clock of gals. - description: gals1 is the path1 clock of gals. clock-names: diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml index 7ed7839ff0a7..2353f6cf3c80 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml @@ -37,7 +37,6 @@ properties: description: | apb and smi are mandatory. gals(global async local sync) is optional. minItems: 2 - maxItems: 3 items: - description: apb is Advanced Peripheral Bus clock, It's the clock for setting the register. diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt deleted file mode 100644 index d2250498c36d..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt +++ /dev/null @@ -1,130 +0,0 @@ -Embedded Memory Controller - -Properties: -- name : Should be emc -- #address-cells : Should be 1 -- #size-cells : Should be 0 -- compatible : Should contain "nvidia,tegra20-emc". -- reg : Offset and length of the register set for the device -- nvidia,use-ram-code : If present, the sub-nodes will be addressed - and chosen using the ramcode board selector. If omitted, only one - set of tables can be present and said tables will be used - irrespective of ram-code configuration. -- interrupts : Should contain EMC General interrupt. -- clocks : Should contain EMC clock. -- nvidia,memory-controller : Phandle of the Memory Controller node. -- #interconnect-cells : Should be 0. -- operating-points-v2: See ../bindings/opp/opp.txt for details. - -For each opp entry in 'operating-points-v2' table: -- opp-supported-hw: One bitfield indicating SoC process ID mask - - A bitwise AND is performed against this value and if any bit - matches, the OPP gets enabled. - -Optional properties: -- power-domains: Phandle of the SoC "core" power domain. - -Child device nodes describe the memory settings for different configurations and clock rates. - -Example: - - opp_table: opp-table { - compatible = "operating-points-v2"; - - opp@36000000 { - opp-microvolt = <950000 950000 1300000>; - opp-hz = /bits/ 64 <36000000>; - }; - ... - }; - - memory-controller@7000f400 { - #address-cells = < 1 >; - #size-cells = < 0 >; - #interconnect-cells = <0>; - compatible = "nvidia,tegra20-emc"; - reg = <0x7000f400 0x400>; - interrupts = <0 78 0x04>; - clocks = <&tegra_car TEGRA20_CLK_EMC>; - nvidia,memory-controller = <&mc>; - power-domains = <&domain>; - operating-points-v2 = <&opp_table>; - } - - -Embedded Memory Controller ram-code table - -If the emc node has the nvidia,use-ram-code property present, then the -next level of nodes below the emc table are used to specify which settings -apply for which ram-code settings. - -If the emc node lacks the nvidia,use-ram-code property, this level is omitted -and the tables are stored directly under the emc node (see below). - -Properties: - -- name : Should be emc-tables -- nvidia,ram-code : the binary representation of the ram-code board strappings - for which this node (and children) are valid. - - - -Embedded Memory Controller configuration table - -This is a table containing the EMC register settings for the various -operating speeds of the memory controller. They are always located as -subnodes of the emc controller node. - -There are two ways of specifying which tables to use: - -* The simplest is if there is just one set of tables in the device tree, - and they will always be used (based on which frequency is used). - This is the preferred method, especially when firmware can fill in - this information based on the specific system information and just - pass it on to the kernel. - -* The slightly more complex one is when more than one memory configuration - might exist on the system. The Tegra20 platform handles this during - early boot by selecting one out of possible 4 memory settings based - on a 2-pin "ram code" bootstrap setting on the board. The values of - these strappings can be read through a register in the SoC, and thus - used to select which tables to use. - -Properties: -- name : Should be emc-table -- compatible : Should contain "nvidia,tegra20-emc-table". -- reg : either an opaque enumerator to tell different tables apart, or - the valid frequency for which the table should be used (in kHz). -- clock-frequency : the clock frequency for the EMC at which this - table should be used (in kHz). -- nvidia,emc-registers : a 46 word array of EMC registers to be programmed - for operation at the 'clock-frequency' setting. - The order and contents of the registers are: - RC, RFC, RAS, RP, R2W, W2R, R2P, W2P, RD_RCD, WR_RCD, RRD, REXT, - WDV, QUSE, QRST, QSAFE, RDV, REFRESH, BURST_REFRESH_NUM, PDEX2WR, - PDEX2RD, PCHG2PDEN, ACT2PDEN, AR2PDEN, RW2PDEN, TXSR, TCKE, TFAW, - TRPAB, TCLKSTABLE, TCLKSTOP, TREFBW, QUSE_EXTRA, FBIO_CFG6, ODT_WRITE, - ODT_READ, FBIO_CFG5, CFG_DIG_DLL, DLL_XFORM_DQS, DLL_XFORM_QUSE, - ZCAL_REF_CNT, ZCAL_WAIT_CNT, AUTO_CAL_INTERVAL, CFG_CLKTRIM_0, - CFG_CLKTRIM_1, CFG_CLKTRIM_2 - - emc-table@166000 { - reg = <166000>; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = < 166000 >; - nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 >; - }; - - emc-table@333000 { - reg = <333000>; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = < 333000 >; - nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 >; - }; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml new file mode 100644 index 000000000000..cac6842dc8f1 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml @@ -0,0 +1,230 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra20-emc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20 SoC External Memory Controller + +maintainers: + - Dmitry Osipenko <digetx@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + The External Memory Controller (EMC) interfaces with the off-chip SDRAM to + service the request stream sent from Memory Controller. The EMC also has + various performance-affecting settings beyond the obvious SDRAM configuration + parameters and initialization settings. Tegra20 EMC supports multiple JEDEC + standard protocols: DDR1, LPDDR2 and DDR2. + +properties: + compatible: + const: nvidia,tegra20-emc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + "#interconnect-cells": + const: 0 + + nvidia,memory-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle of the Memory Controller node. + + power-domains: + maxItems: 1 + description: + Phandle of the SoC "core" power domain. + + operating-points-v2: + description: + Should contain freqs and voltages and opp-supported-hw property, which + is a bitfield indicating SoC process ID mask. + + nvidia,use-ram-code: + type: boolean + description: + If present, the emc-tables@ sub-nodes will be addressed. + +$defs: + emc-table: + type: object + properties: + compatible: + const: nvidia,tegra20-emc-table + + clock-frequency: + description: + Memory clock rate in kHz. + minimum: 1000 + maximum: 900000 + + reg: + maxItems: 1 + description: + Either an opaque enumerator to tell different tables apart, or + the valid frequency for which the table should be used (in kHz). + + nvidia,emc-registers: + description: + EMC timing characterization data. These are the registers + (see section "15.4.1 EMC Registers" in the TRM) whose values + need to be specified, according to the board documentation. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: EMC_RC + - description: EMC_RFC + - description: EMC_RAS + - description: EMC_RP + - description: EMC_R2W + - description: EMC_W2R + - description: EMC_R2P + - description: EMC_W2P + - description: EMC_RD_RCD + - description: EMC_WR_RCD + - description: EMC_RRD + - description: EMC_REXT + - description: EMC_WDV + - description: EMC_QUSE + - description: EMC_QRST + - description: EMC_QSAFE + - description: EMC_RDV + - description: EMC_REFRESH + - description: EMC_BURST_REFRESH_NUM + - description: EMC_PDEX2WR + - description: EMC_PDEX2RD + - description: EMC_PCHG2PDEN + - description: EMC_ACT2PDEN + - description: EMC_AR2PDEN + - description: EMC_RW2PDEN + - description: EMC_TXSR + - description: EMC_TCKE + - description: EMC_TFAW + - description: EMC_TRPAB + - description: EMC_TCLKSTABLE + - description: EMC_TCLKSTOP + - description: EMC_TREFBW + - description: EMC_QUSE_EXTRA + - description: EMC_FBIO_CFG6 + - description: EMC_ODT_WRITE + - description: EMC_ODT_READ + - description: EMC_FBIO_CFG5 + - description: EMC_CFG_DIG_DLL + - description: EMC_DLL_XFORM_DQS + - description: EMC_DLL_XFORM_QUSE + - description: EMC_ZCAL_REF_CNT + - description: EMC_ZCAL_WAIT_CNT + - description: EMC_AUTO_CAL_INTERVAL + - description: EMC_CFG_CLKTRIM_0 + - description: EMC_CFG_CLKTRIM_1 + - description: EMC_CFG_CLKTRIM_2 + + required: + - clock-frequency + - compatible + - reg + - nvidia,emc-registers + + additionalProperties: false + +patternProperties: + "^emc-table@[0-9]+$": + $ref: "#/$defs/emc-table" + + "^emc-tables@[a-z0-9-]+$": + type: object + properties: + reg: + maxItems: 1 + description: + An opaque enumerator to tell different tables apart. + + nvidia,ram-code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Value of RAM_CODE this timing set is used for. + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^emc-table@[0-9]+$": + $ref: "#/$defs/emc-table" + + required: + - nvidia,ram-code + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - nvidia,memory-controller + - "#interconnect-cells" + - operating-points-v2 + +additionalProperties: false + +examples: + - | + external-memory-controller@7000f400 { + compatible = "nvidia,tegra20-emc"; + reg = <0x7000f400 0x400>; + interrupts = <0 78 4>; + clocks = <&clock_controller 57>; + + nvidia,memory-controller = <&mc>; + operating-points-v2 = <&dvfs_opp_table>; + power-domains = <&domain>; + + #interconnect-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + nvidia,use-ram-code; + + emc-tables@0 { + nvidia,ram-code = <0>; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + emc-table@333000 { + reg = <333000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <333000>; + nvidia,emc-registers = <0x00000018 0x00000033 + 0x00000012 0x00000004 0x00000004 0x00000005 + 0x00000003 0x0000000c 0x00000006 0x00000006 + 0x00000003 0x00000001 0x00000004 0x00000005 + 0x00000004 0x00000009 0x0000000d 0x00000bff + 0x00000000 0x00000003 0x00000003 0x00000006 + 0x00000006 0x00000001 0x00000011 0x000000c8 + 0x00000003 0x0000000e 0x00000007 0x00000008 + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0xf0440303 + 0x007fe010 0x00001414 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt deleted file mode 100644 index d56615fd343a..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt +++ /dev/null @@ -1,47 +0,0 @@ -Device tree bindings for ARM PL353 static memory controller - -PL353 static memory controller supports two kinds of memory -interfaces.i.e NAND and SRAM/NOR interfaces. -The actual devices are instantiated from the child nodes of pl353 smc node. - -Required properties: -- compatible : Should be "arm,pl353-smc-r2p1", "arm,primecell". -- reg : Controller registers map and length. -- clock-names : List of input clock names - "memclk", "apb_pclk" - (See clock bindings for details). -- clocks : Clock phandles (see clock bindings for details). -- address-cells : Must be 2. -- size-cells : Must be 1. - -Child nodes: - For NAND the "arm,pl353-nand-r2p1" and for NOR the "cfi-flash" drivers are -supported as child nodes. - -for NAND partition information please refer the below file -Documentation/devicetree/bindings/mtd/partition.txt - -Example: - smcc: memory-controller@e000e000 - compatible = "arm,pl353-smc-r2p1", "arm,primecell"; - clock-names = "memclk", "apb_pclk"; - clocks = <&clkc 11>, <&clkc 44>; - reg = <0xe000e000 0x1000>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0x0 0x0 0xe1000000 0x1000000 //Nand CS Region - 0x1 0x0 0xe2000000 0x2000000 //SRAM/NOR CS Region - 0x2 0x0 0xe4000000 0x2000000>; //SRAM/NOR CS Region - nand_0: flash@e1000000 { - compatible = "arm,pl353-nand-r2p1" - reg = <0 0 0x1000000>; - (...) - }; - nor0: flash@e2000000 { - compatible = "cfi-flash"; - reg = <1 0 0x2000000>; - }; - nor1: flash@e4000000 { - compatible = "cfi-flash"; - reg = <2 0 0x2000000>; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml index 4dfa70a013ae..d793dd0316b7 100644 --- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -117,6 +117,22 @@ properties: - "#address-cells" - "#size-cells" + cbas: + type: object + + description: + This device is used to signal when a detachable base is attached + to a Chrome OS tablet. This device cannot be detected at runtime. + + properties: + compatible: + const: google,cros-cbas + + required: + - compatible + + additionalProperties: false + patternProperties: "^i2c-tunnel[0-9]*$": type: object @@ -187,6 +203,10 @@ examples: proximity { compatible = "google,cros-ec-mkbp-proximity"; }; + + cbas { + compatible = "google,cros-cbas"; + }; }; }; diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt index b52e7a33f0f9..190230216de8 100644 --- a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt +++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt @@ -16,8 +16,8 @@ Optional subnodes: The sub-functions of CPCAP get their own node with their own compatible values, which are described in the following files: -- Documentation/devicetree/bindings/power/supply/cpcap-battery.txt -- Documentation/devicetree/bindings/power/supply/cpcap-charger.txt +- Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml +- Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml - Documentation/devicetree/bindings/regulator/cpcap-regulator.txt - Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt - Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt index 2661775a3825..99a84b69a29f 100644 --- a/Documentation/devicetree/bindings/mfd/mt6397.txt +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt @@ -21,6 +21,7 @@ Required properties: compatible: "mediatek,mt6323" for PMIC MT6323 "mediatek,mt6358" for PMIC MT6358 + "mediatek,mt6359" for PMIC MT6359 "mediatek,mt6397" for PMIC MT6397 Optional subnodes: diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml new file mode 100644 index 000000000000..779936850ee0 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/qcom,pm8008.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. PM8008 PMIC bindings + +maintainers: + - Guru Das Srinagesh <gurus@codeaurora.org> + +description: | + Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that integrates + all the necessary power management, housekeeping, and interface support + functions into a single IC. + +properties: + compatible: + const: qcom,pm8008 + + reg: + description: + I2C slave address. + + maxItems: 1 + + interrupts: + maxItems: 1 + + description: Parent interrupt. + + "#interrupt-cells": + const: 2 + + description: | + The first cell is the IRQ number, the second cell is the IRQ trigger + flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h. + + interrupt-controller: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^gpio@[0-9a-f]+$": + type: object + + description: | + The GPIO peripheral. This node may be specified twice, one for each GPIO. + + properties: + compatible: + const: qcom,pm8008-gpio + + reg: + description: Peripheral address of one of the two GPIO peripherals. + maxItems: 1 + + gpio-controller: true + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + "#gpio-cells": + const: 2 + + required: + - compatible + - reg + - gpio-controller + - interrupt-controller + - "#gpio-cells" + - "#interrupt-cells" + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - "#address-cells" + - "#size-cells" + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/mfd/qcom-pm8008.h> + #include <dt-bindings/interrupt-controller/irq.h> + qupv3_se13_i2c { + #address-cells = <1>; + #size-cells = <0>; + pm8008i@8 { + compatible = "qcom,pm8008"; + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&tlmm>; + interrupts = <32 IRQ_TYPE_EDGE_RISING>; + + gpio@c000 { + compatible = "qcom,pm8008-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt index 79367a43b27d..5ef79bf3d035 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt @@ -34,6 +34,10 @@ Required properties: "qcom,pm8998", "qcom,pmi8998", "qcom,pm8005", + "qcom,pm8350c", + "qcom,pmk8350", + "qcom,pm7325", + "qcom,pmr735a", or generalized "qcom,spmi-pmic". - reg: Specifies the SPMI USID slave address for this device. For more information see: diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml new file mode 100644 index 000000000000..4762eb1439ce --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/richtek,rt4831.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4831 DSV and Backlight Integrated IC + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + RT4831 is a multifunctional device that can provide power to the LCD display + and LCD backlight. + + For Display Bias Voltage DSVP and DSVN, the output range is about 4V to 6.5V. + It's sufficient to meet the current LCD power requirement. + + For the LCD backlight, it can provide four channel WLED driving capability. + Each channel driving current is up to 30mA + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf + +properties: + compatible: + const: richtek,rt4831 + + reg: + description: I2C device address. + maxItems: 1 + + enable-gpios: + description: | + GPIO to enable/disable the chip. It is optional. + Some usage directly tied this pin to follow VIO 1.8V power on sequence. + maxItems: 1 + + regulators: + $ref: ../regulator/richtek,rt4831-regulator.yaml + + backlight: + $ref: ../leds/backlight/richtek,rt4831-backlight.yaml + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/rt4831-backlight.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt4831@11 { + compatible = "richtek,rt4831"; + reg = <0x11>; + + regulators { + DSVLCM { + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <7150000>; + regulator-allow-bypass; + }; + DSVP { + regulator-name = "rt4831-dsvp"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + regulator-boot-on; + }; + DSVN { + regulator-name = "rt4831-dsvn"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + regulator-boot-on; + }; + }; + + backlight { + compatible = "richtek,rt4831-backlight"; + default-brightness = <1024>; + max-brightness = <2048>; + richtek,bled-ovp-sel = /bits/ 8 <RT4831_BLOVPLVL_21V>; + richtek,channel-use = /bits/ 8 <RT4831_BLED_ALLCHEN>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt index 04df07f6f793..23a17a6663ec 100644 --- a/Documentation/devicetree/bindings/mfd/rk808.txt +++ b/Documentation/devicetree/bindings/mfd/rk808.txt @@ -23,6 +23,7 @@ Optional properties: default output clock name - rockchip,system-power-controller: Telling whether or not this pmic is controlling the system power. +- wakeup-source: Device can be used as a wakeup source. Optional RK805 properties: - vcc1-supply: The input supply for DCDC_REG1 @@ -63,8 +64,18 @@ Optional RK809 properties: - vcc9-supply: The input supply for DCDC_REG5, SWITCH_REG2 Optional RK817 properties: +- clocks: The input clock for the audio codec +- clock-names: The clock name for the codec clock. Should be "mclk". +- #sound-dai-cells: Needed for the interpretation of sound dais. Should be 0. + - vcc8-supply: The input supply for BOOST - vcc9-supply: The input supply for OTG_SWITCH +- codec: The child node for the codec to hold additional properties. + If no additional properties are required for the codec, this + node can be omitted. + +- rockchip,mic-in-differential: Telling if the microphone uses differential + mode. Should be under the codec child node. Optional RK818 properties: - vcc1-supply: The input supply for DCDC_REG1 @@ -275,3 +286,180 @@ Example: }; }; }; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "rk808-clkout1", "xin32k"; + clock-names = "mclk"; + clocks = <&cru SCLK_I2S1_OUT>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; + wakeup-source; + #clock-cells = <1>; + #sound-dai-cells = <0>; + + vcc1-supply = <&vccsys>; + vcc2-supply = <&vccsys>; + vcc3-supply = <&vccsys>; + vcc4-supply = <&vccsys>; + vcc5-supply = <&vccsys>; + vcc6-supply = <&vccsys>; + vcc7-supply = <&vccsys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-name = "vcc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v3_pmu: LDO_REG4 { + regulator-name = "vcc3v3_pmu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_bl: LDO_REG7 { + regulator-name = "vcc_bl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_lcd: LDO_REG8 { + regulator-name = "vcc_lcd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc_cam: LDO_REG9 { + regulator-name = "vcc_cam"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + }; + + rk817_codec: codec { + rockchip,mic-in-differential; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml index 0f16c8864a87..dace35362a7a 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml @@ -119,8 +119,6 @@ patternProperties: - compatible required: - - "#address-cells" - - "#size-cells" - compatible - reg - clocks diff --git a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml new file mode 100644 index 000000000000..a0d4bad5dc81 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml @@ -0,0 +1,278 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/stericsson,db8500-prcmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST-Ericsson DB8500 PRCMU - Power Reset and Control Management Unit + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: + The DB8500 Power Reset and Control Management Unit is an XP70 8-bit + microprocessor that is embedded in the always-on power domain of the + DB8500 SoCs to manage the low power states, powering up and down parts + of the silicon, and controlling reset of different IP blocks. + +properties: + $nodename: + pattern: '^prcmu@[0-9a-f]+$' + + compatible: + description: The device is compatible both to the device-specific + compatible "stericsson,db8500-prcmu" and "syscon". The latter + compatible is needed for the device to be exposed as a system + controller so that arbitrary registers can be access by + different operating system components. + items: + - const: stericsson,db8500-prcmu + - const: syscon + + reg: + items: + - description: Main PRCMU register area + - description: PRCMU TCPM register area + - description: PRCMU TCDM register area + + reg-names: + items: + - const: prcmu + - const: prcmu-tcpm + - const: prcmu-tcdm + + interrupts: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + db8500-prcmu-regulators: + description: Node describing the DB8500 regulators. These are mainly + power rails inside the silicon but some of those are also routed + out to external pins. + type: object + + properties: + compatible: + const: stericsson,db8500-prcmu-regulator + + db8500_vape: + description: The voltage for the application processor, the + main voltage domain for the chip. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_varm: + description: The voltage for the ARM Cortex A-9 CPU. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_vmodem: + description: The voltage for the modem subsystem. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_vpll: + description: The voltage for the phase locked loop clocks. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_vsmps1: + description: Also known as VIO12, is a step-down voltage regulator + for 1.2V I/O. SMPS means System Management Power Source. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_vsmps2: + description: Also known as VIO18, is a step-down voltage regulator + for 1.8V I/O. SMPS means System Management Power Source. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_vsmps3: + description: This is a step-down voltage regulator + for 0.87 thru 1.875V I/O. SMPS means System Management Power Source. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_vrf1: + description: RF transciever voltage regulator. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_sva_mmdsp: + description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) + voltage regulator. This is the voltage for the accelerator DSP + for video encoding and decoding. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_sva_mmdsp_ret: + description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) + voltage regulator for retention mode. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_sva_pipe: + description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) + voltage regulator for the data pipe. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_sia_mmdsp: + description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) + voltage regulator. This is the voltage for the accelerator DSP + for image encoding and decoding. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_sia_mmdsp_ret: + description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) + voltage regulator for retention mode. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_sia_pipe: + description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) + voltage regulator for the data pipe. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_sga: + description: Smart Graphics Accelerator (SGA) voltage regulator. + This is in effect controlling the power to the MALI400 3D + accelerator block. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_b2r2_mcde: + description: Blit Blend Rotate and Rescale (B2R2), and Multi-Channel + Display Engine (MCDE) voltage regulator. These are two graphics + blocks. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_esram12: + description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_esram12_ret: + description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator for + retention mode. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_esram34: + description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_esram34_ret: + description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator for + retention mode. + type: object + $ref: ../regulator/regulator.yaml# + + required: + - compatible + - db8500_vape + - db8500_varm + - db8500_vmodem + - db8500_vpll + - db8500_vsmps1 + - db8500_vsmps2 + - db8500_vsmps3 + - db8500_vrf1 + - db8500_sva_mmdsp + - db8500_sva_mmdsp_ret + - db8500_sva_pipe + - db8500_sia_mmdsp + - db8500_sia_mmdsp_ret + - db8500_sia_pipe + - db8500_sga + - db8500_b2r2_mcde + - db8500_esram12 + - db8500_esram12_ret + - db8500_esram34 + - db8500_esram34_ret + + additionalProperties: false + +patternProperties: + "^thermal@[0-9a-f]+$": + description: Node describing the DB8500 thermal control functions. + This binds to an operating system driver that monitors the + temperature of the SoC. + type: object + + properties: + compatible: + const: stericsson,db8500-thermal + + reg: + maxItems: 1 + + interrupts: + items: + - description: Hotmon low interrupt (falling temperature) + - description: Hotmon high interrupt (rising temperature) + + interrupt-names: + items: + - const: IRQ_HOTMON_LOW + - const: IRQ_HOTMON_HIGH + + '#thermal-sensor-cells': + const: 0 + + additionalProperties: false + + "^prcmu-timer-4@[0-9a-f]+$": + description: Node describing the externally visible timer 4 in the + PRCMU block. This timer is interesting to the operating system + since even thought it has a very low resolution (32768 Hz) it is + always on, and thus provides a consistent monotonic timeline for + the system. + type: object + + properties: + compatible: + const: stericsson,db8500-prcmu-timer-4 + + reg: + maxItems: 1 + + additionalProperties: false + + "^ab850[05]$": + description: Node describing the Analog Baseband 8500 mixed-signals + ASIC AB8500 and subcomponents. The AB8500 is accessed through the + PRCMU and hence it appears here. This component has a separate + set of devicetree bindings. The AB8505 is a newer version of the + same ASIC. + type: object + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + - ranges + - interrupts + - interrupt-controller + - '#interrupt-cells' + - db8500-prcmu-regulators + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml index 19fcf59fd2fe..272832e9f8f2 100644 --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml @@ -43,12 +43,10 @@ properties: patternProperties: # Optional children - "^serdes-ln-ctrl@[0-9a-f]+$": + "^mux-controller@[0-9a-f]+$": type: object - description: | - This is the SERDES lane control mux. It should follow the bindings - specified in - Documentation/devicetree/bindings/mux/reg-mux.txt + description: + This is the SERDES lane control mux. required: - compatible @@ -68,9 +66,18 @@ examples: #size-cells = <1>; ranges; - serdes_ln_ctrl: serdes-ln-ctrl@4080 { + serdes_ln_ctrl: mux-controller@4080 { compatible = "mmio-mux"; reg = <0x00004080 0x50>; + + #mux-control-cells = <1>; + mux-reg-masks = + <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */ + <0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */ + <0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */ + <0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */ + <0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>; + /* SERDES4 lane0/1/2/3 select */ }; }; ... diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt index 7b636b7a8311..72ea0af368d4 100644 --- a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt +++ b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt @@ -2,7 +2,10 @@ EEPROMs (SPI) compatible with Microchip Technology 93xx46 family. Required properties: - compatible : shall be one of: + "atmel,at93c46" "atmel,at93c46d" + "atmel,at93c56" + "atmel,at93c66" "eeprom-93xx46" "microchip,93lc46b" - data-size : number of data bits per word (either 8 or 16) diff --git a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml index e75b3a8ba816..4f62ad6ce50c 100644 --- a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml @@ -64,7 +64,6 @@ properties: clocks: minItems: 2 - maxItems: 4 items: - description: Bus Clock - description: Module Clock @@ -73,7 +72,6 @@ properties: clock-names: minItems: 2 - maxItems: 4 items: - const: ahb - const: mmc diff --git a/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml index 6f569fbfa134..2f63f2cdeb71 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml @@ -21,6 +21,7 @@ properties: - brcm,bcm2711-emmc2 - brcm,sdhci-iproc-cygnus - brcm,sdhci-iproc + - brcm,bcm7211a0-sdhci reg: minItems: 1 diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index 369471814496..b5baf439fbac 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -116,7 +116,6 @@ properties: pinctrl-names: minItems: 1 - maxItems: 4 items: - const: default - const: state_100mhz diff --git a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml index 04ba8b7fc054..546480f41141 100644 --- a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml @@ -19,6 +19,7 @@ properties: - ingenic,jz4740-mmc - ingenic,jz4725b-mmc - ingenic,jz4760-mmc + - ingenic,jz4775-mmc - ingenic,jz4780-mmc - ingenic,x1000-mmc - items: diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index e141330c1114..25ac8e200970 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -220,6 +220,11 @@ properties: description: eMMC HS400 enhanced strobe mode is supported + no-mmc-hs400: + $ref: /schemas/types.yaml#/definitions/flag + description: + All eMMC HS400 modes are not supported. + dsr: description: Value the card Driver Stage Register (DSR) should be programmed @@ -358,22 +363,6 @@ additionalProperties: true examples: - | - mmc@ab000000 { - compatible = "sdhci"; - reg = <0xab000000 0x200>; - interrupts = <23>; - bus-width = <4>; - cd-gpios = <&gpio 69 0>; - cd-inverted; - wp-gpios = <&gpio 70 0>; - max-frequency = <50000000>; - keep-power-in-suspend; - wakeup-source; - mmc-pwrseq = <&sdhci0_pwrseq>; - clk-phase-sd-hs = <63>, <72>; - }; - - - | mmc3: mmc@1c12000 { #address-cells = <1>; #size-cells = <0>; @@ -385,9 +374,9 @@ examples: non-removable; mmc-pwrseq = <&sdhci0_pwrseq>; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; - compatible = "brcm,bcm43xx-fmac"; + compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; interrupts = <10 8>; interrupt-names = "host-wake"; diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml index 8648d48dbbfd..e866e985549e 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml @@ -31,6 +31,8 @@ properties: - const: mediatek,mt2701-mmc - items: - const: mediatek,mt8192-mmc + - const: mediatek,mt8183-mmc + - items: - const: mediatek,mt8195-mmc - const: mediatek,mt8183-mmc @@ -38,7 +40,6 @@ properties: description: Should contain phandle for the clock feeding the MMC controller. minItems: 2 - maxItems: 8 items: - description: source clock (required). - description: HCLK which used for host (required). @@ -51,7 +52,6 @@ properties: clock-names: minItems: 2 - maxItems: 8 items: - const: source - const: hclk diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt deleted file mode 100644 index 291532ac0446..000000000000 --- a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt +++ /dev/null @@ -1,53 +0,0 @@ -* Renesas Multi Media Card Interface (MMCIF) Controller - -This file documents differences between the core properties in mmc.txt -and the properties used by the MMCIF device. - - -Required properties: - -- compatible: should be "renesas,mmcif-<soctype>", "renesas,sh-mmcif" as a - fallback. Examples with <soctype> are: - - "renesas,mmcif-r7s72100" for the MMCIF found in r7s72100 SoCs - - "renesas,mmcif-r8a73a4" for the MMCIF found in r8a73a4 SoCs - - "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs - - "renesas,mmcif-r8a7742" for the MMCIF found in r8a7742 SoCs - - "renesas,mmcif-r8a7743" for the MMCIF found in r8a7743 SoCs - - "renesas,mmcif-r8a7744" for the MMCIF found in r8a7744 SoCs - - "renesas,mmcif-r8a7745" for the MMCIF found in r8a7745 SoCs - - "renesas,mmcif-r8a7778" for the MMCIF found in r8a7778 SoCs - - "renesas,mmcif-r8a7790" for the MMCIF found in r8a7790 SoCs - - "renesas,mmcif-r8a7791" for the MMCIF found in r8a7791 SoCs - - "renesas,mmcif-r8a7793" for the MMCIF found in r8a7793 SoCs - - "renesas,mmcif-r8a7794" for the MMCIF found in r8a7794 SoCs - - "renesas,mmcif-sh73a0" for the MMCIF found in sh73a0 SoCs - -- interrupts: Some SoCs have only 1 shared interrupt, while others have either - 2 or 3 individual interrupts (error, int, card detect). Below is the number - of interrupts for each SoC: - 1: r8a73a4, r8a7742, r8a7743, r8a7744, r8a7745, r8a7778, r8a7790, r8a7791, - r8a7793, r8a7794 - 2: r8a7740, sh73a0 - 3: r7s72100 - -- clocks: reference to the functional clock - -- dmas: reference to the DMA channels, one per channel name listed in the - dma-names property. -- dma-names: must contain "tx" for the transmit DMA channel and "rx" for the - receive DMA channel. -- max-frequency: Maximum operating clock frequency, driver uses default clock - frequency if it is not set. - - -Example: R8A7790 (R-Car H2) MMCIF0 - - mmcif0: mmc@ee200000 { - compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; - reg = <0 0xee200000 0 0x80>; - interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; - dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; - dma-names = "tx", "rx"; - max-frequency = <97500000>; - }; diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml b/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml new file mode 100644 index 000000000000..c36ba561c387 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/renesas,mmcif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Multi Media Card Interface (MMCIF) Controller + +maintainers: + - Wolfram Sang <wsa+renesas@sang-engineering.com> + +allOf: + - $ref: "mmc-controller.yaml" + +properties: + compatible: + items: + - enum: + - renesas,mmcif-r7s72100 # RZ/A1H + - renesas,mmcif-r8a73a4 # R-Mobile APE6 + - renesas,mmcif-r8a7740 # R-Mobile A1 + - renesas,mmcif-r8a7742 # RZ/G1H + - renesas,mmcif-r8a7743 # RZ/G1M + - renesas,mmcif-r8a7744 # RZ/G1N + - renesas,mmcif-r8a7745 # RZ/G1E + - renesas,mmcif-r8a7778 # R-Car M1A + - renesas,mmcif-r8a7790 # R-Car H2 + - renesas,mmcif-r8a7791 # R-Car M2-W + - renesas,mmcif-r8a7793 # R-Car M2-N + - renesas,mmcif-r8a7794 # R-Car E2 + - renesas,mmcif-sh73a0 # SH-Mobile AG5 + - const: renesas,sh-mmcif + + reg: + maxItems: 1 + + interrupts: true + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + minItems: 2 + maxItems: 4 + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + + max-frequency: true + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + +if: + properties: + compatible: + contains: + const: renesas,mmcif-r7s72100 +then: + properties: + interrupts: + items: + - description: Error interrupt + - description: Normal operation interrupt + - description: Card detection interrupt +else: + if: + properties: + compatible: + contains: + enum: + - renesas,mmcif-r8a7740 + - renesas,mmcif-sh73a0 + then: + properties: + interrupts: + items: + - description: Error interrupt + - description: Normal operation interrupt + else: + if: + properties: + compatible: + contains: + enum: + - renesas,mmcif-r8a73a4 + - renesas,mmcif-r8a7778 + then: + properties: + interrupts: + maxItems: 1 + else: + properties: + interrupts: + maxItems: 1 + required: + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7790-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7790-sysc.h> + + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; + reg = <0xee200000 0x80>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 315>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 315>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + }; diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml index 1118b6fa93c9..677989bc5924 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml @@ -75,7 +75,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: core - const: cd @@ -107,7 +106,6 @@ properties: pinctrl-names: minItems: 1 - maxItems: 2 items: - const: default - const: state_uhs diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml index 3762f1c8de96..54fb59820d2b 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml @@ -29,21 +29,15 @@ properties: - const: rockchip,rk3288-dw-mshc - items: - enum: - # for Rockchip PX30 - rockchip,px30-dw-mshc - # for Rockchip RK3036 + - rockchip,rk1808-dw-mshc - rockchip,rk3036-dw-mshc - # for Rockchip RK322x - rockchip,rk3228-dw-mshc - # for Rockchip RK3308 - rockchip,rk3308-dw-mshc - # for Rockchip RK3328 - rockchip,rk3328-dw-mshc - # for Rockchip RK3368 - rockchip,rk3368-dw-mshc - # for Rockchip RK3399 - rockchip,rk3399-dw-mshc - # for Rockchip RV1108 + - rockchip,rk3568-dw-mshc - rockchip,rv1108-dw-mshc - const: rockchip,rk3288-dw-mshc diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml index 3a79e39253d2..224303f5b913 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml @@ -19,7 +19,6 @@ properties: - const: ti,am654-sdhci-5.1 - const: ti,j721e-sdhci-8bit - const: ti,j721e-sdhci-4bit - - const: ti,j721e-sdhci-4bit - const: ti,am64-sdhci-8bit - const: ti,am64-sdhci-4bit - items: @@ -45,7 +44,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: clk_ahb - const: clk_xin diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml index aa12480648a5..1c87f4218e18 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml @@ -57,7 +57,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: io - const: core diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index 4a9145ef15d6..57d077c0b7c1 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -25,10 +25,10 @@ The following are mandatory properties for 66AK2G SoCs only: - power-domains:Should contain a phandle to a PM domain provider node and an args specifier containing the MMC device id value. This property is as per the binding, - Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml - clocks: Must contain an entry for each entry in clock-names. Should be defined as per the he appropriate clock bindings consumer - usage in Documentation/devicetree/bindings/clock/ti,sci-clk.txt + usage in Documentation/devicetree/bindings/clock/ti,sci-clk.yaml - clock-names: Shall be "fck" for the functional clock, and "mmchsdb_fck" for the debounce clock. diff --git a/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml new file mode 100644 index 000000000000..5f126bb9b202 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/arm,pl353-nand-r2p1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PL353 NAND Controller device tree bindings + +allOf: + - $ref: "nand-controller.yaml" + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + - Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> + +properties: + compatible: + items: + - const: arm,pl353-nand-r2p1 + + reg: + items: + - items: + - description: CS with regard to the parent ranges property + - description: Offset of the memory region requested by the device + - description: Length of the memory region requested by the device + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + smcc: memory-controller@e000e000 { + compatible = "arm,pl353-smc-r2p1", "arm,primecell"; + reg = <0xe000e000 0x0001000>; + clock-names = "memclk", "apb_pclk"; + clocks = <&clkc 11>, <&clkc 44>; + ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */ + 0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */ + 0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */ + #address-cells = <2>; + #size-cells = <1>; + + nfc0: nand-controller@0,0 { + compatible = "arm,pl353-nand-r2p1"; + reg = <0 0 0x1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/arm-versatile.txt b/Documentation/devicetree/bindings/mtd/arm-versatile.txt deleted file mode 100644 index 4ec28796a3c0..000000000000 --- a/Documentation/devicetree/bindings/mtd/arm-versatile.txt +++ /dev/null @@ -1,26 +0,0 @@ -Flash device on ARM Versatile board - -These flash chips are found in the ARM reference designs like Integrator, -Versatile, RealView, Versatile Express etc. - -They are regular CFI compatible (Intel or AMD extended) flash chips with -some special write protect/VPP bits that can be controlled by the machine's -system controller. - -Required properties: -- compatible : must be "arm,versatile-flash", "cfi-flash"; -- reg : memory address for the flash chip -- bank-width : width in bytes of flash interface. - -For the rest of the properties, see mtd-physmap.txt. - -The device tree may optionally contain sub-nodes describing partitions of the -address space. See partition.txt for more detail. - -Example: - -flash@34000000 { - compatible = "arm,versatile-flash", "cfi-flash"; - reg = <0x34000000 0x4000000>; - bank-width = <4>; -}; diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt deleted file mode 100644 index 44335a4f8bfb..000000000000 --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt +++ /dev/null @@ -1,186 +0,0 @@ -* Broadcom STB NAND Controller - -The Broadcom Set-Top Box NAND controller supports low-level access to raw NAND -flash chips. It has a memory-mapped register interface for both control -registers and for its data input/output buffer. On some SoCs, this controller is -paired with a custom DMA engine (inventively named "Flash DMA") which supports -basic PROGRAM and READ functions, among other features. - -This controller was originally designed for STB SoCs (BCM7xxx) but is now -available on a variety of Broadcom SoCs, including some BCM3xxx, BCM63xx, and -iProc/Cygnus. Its history includes several similar (but not fully register -compatible) versions. - -Required properties: -- compatible : May contain an SoC-specific compatibility string (see below) - to account for any SoC-specific hardware bits that may be - added on top of the base core controller. - In addition, must contain compatibility information about - the core NAND controller, of the following form: - "brcm,brcmnand" and an appropriate version compatibility - string, like "brcm,brcmnand-v7.0" - Possible values: - brcm,brcmnand-v2.1 - brcm,brcmnand-v2.2 - brcm,brcmnand-v4.0 - brcm,brcmnand-v5.0 - brcm,brcmnand-v6.0 - brcm,brcmnand-v6.1 - brcm,brcmnand-v6.2 - brcm,brcmnand-v7.0 - brcm,brcmnand-v7.1 - brcm,brcmnand-v7.2 - brcm,brcmnand-v7.3 - brcm,brcmnand -- reg : the register start and length for NAND register region. - (optional) Flash DMA register range (if present) - (optional) NAND flash cache range (if at non-standard offset) -- reg-names : a list of the names corresponding to the previous register - ranges. Should contain "nand" and (optionally) - "flash-dma" or "flash-edu" and/or "nand-cache". -- interrupts : The NAND CTLRDY interrupt, (if Flash DMA is available) - FLASH_DMA_DONE and if EDU is avaialble and used FLASH_EDU_DONE -- interrupt-names : May be "nand_ctlrdy" or "flash_dma_done" or "flash_edu_done", - if broken out as individual interrupts. - May be "nand", if the SoC has the individual NAND - interrupts multiplexed behind another custom piece of - hardware -- #address-cells : <1> - subnodes give the chip-select number -- #size-cells : <0> - -Optional properties: -- clock : reference to the clock for the NAND controller -- clock-names : "nand" (required for the above clock) -- brcm,nand-has-wp : Some versions of this IP include a write-protect - (WP) control bit. It is always available on >= - v7.0. Use this property to describe the rare - earlier versions of this core that include WP - - -- Additional SoC-specific NAND controller properties -- - -The NAND controller is integrated differently on the variety of SoCs on which it -is found. Part of this integration involves providing status and enable bits -with which to control the 8 exposed NAND interrupts, as well as hardware for -configuring the endianness of the data bus. On some SoCs, these features are -handled via standard, modular components (e.g., their interrupts look like a -normal IRQ chip), but on others, they are controlled in unique and interesting -ways, sometimes with registers that lump multiple NAND-related functions -together. The former case can be described simply by the standard interrupts -properties in the main controller node. But for the latter exceptional cases, -we define additional 'compatible' properties and associated register resources within the NAND controller node above. - - - compatible: Can be one of several SoC-specific strings. Each SoC may have - different requirements for its additional properties, as described below each - bullet point below. - - * "brcm,nand-bcm63138" - - reg: (required) the 'NAND_INT_BASE' register range, with separate status - and enable registers - - reg-names: (required) "nand-int-base" - - * "brcm,nand-bcm6368" - - compatible: should contain "brcm,nand-bcm<soc>", "brcm,nand-bcm6368" - - reg: (required) the 'NAND_INTR_BASE' register range, with combined status - and enable registers, and boot address registers - - reg-names: (required) "nand-int-base" - - * "brcm,nand-iproc" - - reg: (required) the "IDM" register range, for interrupt enable and APB - bus access endianness configuration, and the "EXT" register range, - for interrupt status/ack. - - reg-names: (required) a list of the names corresponding to the previous - register ranges. Should contain "iproc-idm" and "iproc-ext". - - -* NAND chip-select - -Each controller (compatible: "brcm,brcmnand") may contain one or more subnodes -to represent enabled chip-selects which (may) contain NAND flash chips. Their -properties are as follows. - -Required properties: -- compatible : should contain "brcm,nandcs" -- reg : a single integer representing the chip-select - number (e.g., 0, 1, 2, etc.) -- #address-cells : see partition.txt -- #size-cells : see partition.txt - -Optional properties: -- nand-ecc-strength : see nand-controller.yaml -- nand-ecc-step-size : must be 512 or 1024. See nand-controller.yaml -- nand-on-flash-bbt : boolean, to enable the on-flash BBT for this - chip-select. See nand-controller.yaml -- brcm,nand-oob-sector-size : integer, to denote the spare area sector size - expected for the ECC layout in use. This size, in - addition to the strength and step-size, - determines how the hardware BCH engine will lay - out the parity bytes it stores on the flash. - This property can be automatically determined by - the flash geometry (particularly the NAND page - and OOB size) in many cases, but when booting - from NAND, the boot controller has only a limited - number of available options for its default ECC - layout. - -Each nandcs device node may optionally contain sub-nodes describing the flash -partition mapping. See partition.txt for more detail. - - -Example: - -nand@f0442800 { - compatible = "brcm,brcmnand-v7.0", "brcm,brcmnand"; - reg = <0xF0442800 0x600>, - <0xF0443000 0x100>; - reg-names = "nand", "flash-dma"; - interrupt-parent = <&hif_intr2_intc>; - interrupts = <24>, <4>; - - #address-cells = <1>; - #size-cells = <0>; - - nandcs@1 { - compatible = "brcm,nandcs"; - reg = <1>; // Chip select 1 - nand-on-flash-bbt; - nand-ecc-strength = <12>; - nand-ecc-step-size = <512>; - - // Partitions - #address-cells = <1>; // <2>, for 64-bit offset - #size-cells = <1>; // <2>, for 64-bit length - flash0.rootfs@0 { - reg = <0 0x10000000>; - }; - flash0@0 { - reg = <0 0>; // MTDPART_SIZ_FULL - }; - flash0.kernel@10000000 { - reg = <0x10000000 0x400000>; - }; - }; -}; - -nand@10000200 { - compatible = "brcm,nand-bcm63168", "brcm,nand-bcm6368", - "brcm,brcmnand-v4.0", "brcm,brcmnand"; - reg = <0x10000200 0x180>, - <0x10000600 0x200>, - <0x100000b0 0x10>; - reg-names = "nand", "nand-cache", "nand-int-base"; - interrupt-parent = <&periph_intc>; - interrupts = <50>; - clocks = <&periph_clk 20>; - clock-names = "nand"; - - #address-cells = <1>; - #size-cells = <0>; - - nand0: nandcs@0 { - compatible = "brcm,nandcs"; - reg = <0>; - nand-on-flash-bbt; - nand-ecc-strength = <1>; - nand-ecc-step-size = <512>; - }; -}; diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml new file mode 100644 index 000000000000..e5f1a33332a5 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml @@ -0,0 +1,242 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/brcm,brcmnand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom STB NAND Controller + +maintainers: + - Brian Norris <computersforpeace@gmail.com> + - Kamal Dasu <kdasu.kdev@gmail.com> + +description: | + The Broadcom Set-Top Box NAND controller supports low-level access to raw NAND + flash chips. It has a memory-mapped register interface for both control + registers and for its data input/output buffer. On some SoCs, this controller + is paired with a custom DMA engine (inventively named "Flash DMA") which + supports basic PROGRAM and READ functions, among other features. + + This controller was originally designed for STB SoCs (BCM7xxx) but is now + available on a variety of Broadcom SoCs, including some BCM3xxx, BCM63xx, and + iProc/Cygnus. Its history includes several similar (but not fully register + compatible) versions. + + -- Additional SoC-specific NAND controller properties -- + + The NAND controller is integrated differently on the variety of SoCs on which + it is found. Part of this integration involves providing status and enable + bits with which to control the 8 exposed NAND interrupts, as well as hardware + for configuring the endianness of the data bus. On some SoCs, these features + are handled via standard, modular components (e.g., their interrupts look like + a normal IRQ chip), but on others, they are controlled in unique and + interesting ways, sometimes with registers that lump multiple NAND-related + functions together. The former case can be described simply by the standard + interrupts properties in the main controller node. But for the latter + exceptional cases, we define additional 'compatible' properties and associated + register resources within the NAND controller node above. + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,brcmnand-v2.1 + - brcm,brcmnand-v2.2 + - brcm,brcmnand-v4.0 + - brcm,brcmnand-v5.0 + - brcm,brcmnand-v6.0 + - brcm,brcmnand-v6.1 + - brcm,brcmnand-v6.2 + - brcm,brcmnand-v7.0 + - brcm,brcmnand-v7.1 + - brcm,brcmnand-v7.2 + - brcm,brcmnand-v7.3 + - const: brcm,brcmnand + - description: BCM63138 SoC-specific NAND controller + items: + - const: brcm,nand-bcm63138 + - enum: + - brcm,brcmnand-v7.0 + - brcm,brcmnand-v7.1 + - const: brcm,brcmnand + - description: iProc SoC-specific NAND controller + items: + - const: brcm,nand-iproc + - const: brcm,brcmnand-v6.1 + - const: brcm,brcmnand + - description: BCM63168 SoC-specific NAND controller + items: + - const: brcm,nand-bcm63168 + - const: brcm,nand-bcm6368 + - const: brcm,brcmnand-v4.0 + - const: brcm,brcmnand + + reg: + minItems: 1 + maxItems: 6 + + reg-names: + minItems: 1 + maxItems: 6 + items: + enum: [ nand, flash-dma, flash-edu, nand-cache, nand-int-base, iproc-idm, iproc-ext ] + + interrupts: + minItems: 1 + maxItems: 3 + items: + - description: NAND CTLRDY interrupt + - description: FLASH_DMA_DONE if flash DMA is available + - description: FLASH_EDU_DONE if EDU is available + + interrupt-names: + minItems: 1 + maxItems: 3 + items: + - const: nand_ctlrdy + - const: flash_dma_done + - const: flash_edu_done + + clocks: + maxItems: 1 + description: reference to the clock for the NAND controller + + clock-names: + const: nand + + brcm,nand-has-wp: + description: > + Some versions of this IP include a write-protect + (WP) control bit. It is always available on >= + v7.0. Use this property to describe the rare + earlier versions of this core that include WP + type: boolean + +patternProperties: + "^nand@[a-f0-9]$": + type: object + properties: + compatible: + const: brcm,nandcs + + nand-ecc-step-size: + enum: [ 512, 1024 ] + + brcm,nand-oob-sector-size: + description: | + integer, to denote the spare area sector size + expected for the ECC layout in use. This size, in + addition to the strength and step-size, + determines how the hardware BCH engine will lay + out the parity bytes it stores on the flash. + This property can be automatically determined by + the flash geometry (particularly the NAND page + and OOB size) in many cases, but when booting + from NAND, the boot controller has only a limited + number of available options for its default ECC + layout. + $ref: /schemas/types.yaml#/definitions/uint32 + +allOf: + - $ref: nand-controller.yaml# + - if: + properties: + compatible: + contains: + const: brcm,nand-bcm63138 + then: + properties: + reg-names: + minItems: 2 + maxItems: 2 + items: + - const: nand + - const: nand-int-base + - if: + properties: + compatible: + contains: + const: brcm,nand-bcm6368 + then: + properties: + reg-names: + minItems: 3 + maxItems: 3 + items: + - const: nand + - const: nand-int-base + - const: nand-cache + - if: + properties: + compatible: + contains: + const: brcm,nand-iproc + then: + properties: + reg-names: + minItems: 3 + maxItems: 3 + items: + - const: nand + - const: iproc-idm + - const: iproc-ext + +unevaluatedProperties: false + +required: + - reg + - reg-names + - interrupts + +examples: + - | + nand-controller@f0442800 { + compatible = "brcm,brcmnand-v7.0", "brcm,brcmnand"; + reg = <0xf0442800 0x600>, + <0xf0443000 0x100>; + reg-names = "nand", "flash-dma"; + interrupt-parent = <&hif_intr2_intc>; + interrupts = <24>, <4>; + + #address-cells = <1>; + #size-cells = <0>; + + nand@1 { + compatible = "brcm,nandcs"; + reg = <1>; // Chip select 1 + nand-on-flash-bbt; + nand-ecc-strength = <12>; + nand-ecc-step-size = <512>; + + #address-cells = <1>; + #size-cells = <1>; + }; + }; + - | + nand-controller@10000200 { + compatible = "brcm,nand-bcm63168", "brcm,nand-bcm6368", + "brcm,brcmnand-v4.0", "brcm,brcmnand"; + reg = <0x10000200 0x180>, + <0x100000b0 0x10>, + <0x10000600 0x200>; + reg-names = "nand", "nand-int-base", "nand-cache"; + interrupt-parent = <&periph_intc>; + interrupts = <50>; + clocks = <&periph_clk 20>; + clock-names = "nand"; + + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + nand-ecc-strength = <1>; + nand-ecc-step-size = <512>; + + #address-cells = <1>; + #size-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/common.txt b/Documentation/devicetree/bindings/mtd/common.txt index fc068b923d7a..ae16f9ea8606 100644 --- a/Documentation/devicetree/bindings/mtd/common.txt +++ b/Documentation/devicetree/bindings/mtd/common.txt @@ -1,15 +1 @@ -* Common properties of all MTD devices - -Optional properties: -- label: user-defined MTD device name. Can be used to assign user - friendly names to MTD devices (instead of the flash model or flash - controller based name) in order to ease flash device identification - and/or describe what they are used for. - -Example: - - flash@0 { - label = "System-firmware"; - - /* flash type specific properties */ - }; +This file has been moved to mtd.yaml. diff --git a/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt b/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt index 3fa1b34d69ad..efa5b2aba829 100644 --- a/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt +++ b/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt @@ -9,7 +9,7 @@ Required properties: - syscon : must be a phandle to the system controller - bank-width : width in bytes of flash interface, should be <2> -For the rest of the properties, see mtd-physmap.txt. +For the rest of the properties, see mtd-physmap.yaml. The device tree may optionally contain sub-nodes describing partitions of the address space. See partition.txt for more detail. diff --git a/Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt b/Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt deleted file mode 100644 index ad42f4db32f1..000000000000 --- a/Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt +++ /dev/null @@ -1,13 +0,0 @@ -Bindings for HyperFlash NOR flash chips compliant with Cypress HyperBus -specification and supports Cypress CFI specification 1.5 command set. - -Required properties: -- compatible : "cypress,hyperflash", "cfi-flash" for HyperFlash NOR chips -- reg : Address of flash's memory map - -Example: - - flash@0 { - compatible = "cypress,hyperflash", "cfi-flash"; - reg = <0x0 0x4000000>; - }; diff --git a/Documentation/devicetree/bindings/mtd/intel,ixp4xx-flash.txt b/Documentation/devicetree/bindings/mtd/intel,ixp4xx-flash.txt deleted file mode 100644 index 4bdcb92ae381..000000000000 --- a/Documentation/devicetree/bindings/mtd/intel,ixp4xx-flash.txt +++ /dev/null @@ -1,22 +0,0 @@ -Flash device on Intel IXP4xx SoC - -This flash is regular CFI compatible (Intel or AMD extended) flash chips with -specific big-endian or mixed-endian memory access pattern. - -Required properties: -- compatible : must be "intel,ixp4xx-flash", "cfi-flash"; -- reg : memory address for the flash chip -- bank-width : width in bytes of flash interface, should be <2> - -For the rest of the properties, see mtd-physmap.txt. - -The device tree may optionally contain sub-nodes describing partitions of the -address space. See partition.txt for more detail. - -Example: - -flash@50000000 { - compatible = "intel,ixp4xx-flash", "cfi-flash"; - reg = <0x50000000 0x01000000>; - bank-width = <2>; -}; diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml index 5e7e5349f9a1..ed590d7c6e37 100644 --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml @@ -9,6 +9,9 @@ title: SPI NOR flash ST M25Pxx (and similar) serial flash chips maintainers: - Rob Herring <robh@kernel.org> +allOf: + - $ref: "mtd.yaml#" + properties: compatible: oneOf: @@ -82,6 +85,9 @@ patternProperties: '^partition@': type: object + "^otp(-[0-9]+)?$": + type: object + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml b/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml new file mode 100644 index 000000000000..2cdf6bf3dc4a --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mtd/microchip,mchp48l640.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Microchip 48l640 (and similar) serial EERAM bindings + +maintainers: + - Heiko Schocher <hs@denx.de> + +description: | + The Microchip 48l640 is a 8KByte EERAM connected via SPI. + + datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/20006055B.pdf + +properties: + compatible: + items: + - const: microchip,48l640 + + reg: + maxItems: 1 + + spi-max-frequency: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + eeram@0 { + compatible = "microchip,48l640"; + reg = <0>; + spi-max-frequency = <20000000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt deleted file mode 100644 index c69f4f065d23..000000000000 --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt +++ /dev/null @@ -1,114 +0,0 @@ -CFI or JEDEC memory-mapped NOR flash, MTD-RAM (NVRAM...) - -Flash chips (Memory Technology Devices) are often used for solid state -file systems on embedded devices. - - - compatible : should contain the specific model of mtd chip(s) - used, if known, followed by either "cfi-flash", "jedec-flash", - "mtd-ram" or "mtd-rom". - - reg : Address range(s) of the mtd chip(s) - It's possible to (optionally) define multiple "reg" tuples so that - non-identical chips can be described in one node. - - bank-width : Width (in bytes) of the bank. Equal to the - device width times the number of interleaved chips. - - device-width : (optional) Width of a single mtd chip. If - omitted, assumed to be equal to 'bank-width'. - - #address-cells, #size-cells : Must be present if the device has - sub-nodes representing partitions (see below). In this case - both #address-cells and #size-cells must be equal to 1. - - no-unaligned-direct-access: boolean to disable the default direct - mapping of the flash. - On some platforms (e.g. MPC5200) a direct 1:1 mapping may cause - problems with JFFS2 usage, as the local bus (LPB) doesn't support - unaligned accesses as implemented in the JFFS2 code via memcpy(). - By defining "no-unaligned-direct-access", the flash will not be - exposed directly to the MTD users (e.g. JFFS2) any more. - - linux,mtd-name: allow to specify the mtd name for retro capability with - physmap-flash drivers as boot loader pass the mtd partition via the old - device name physmap-flash. - - use-advanced-sector-protection: boolean to enable support for the - advanced sector protection (Spansion: PPB - Persistent Protection - Bits) locking. - - addr-gpios : (optional) List of GPIO descriptors that will be used to - address the MSBs address lines. The order goes from LSB to MSB. - -For JEDEC compatible devices, the following additional properties -are defined: - - - vendor-id : Contains the flash chip's vendor id (1 byte). - - device-id : Contains the flash chip's device id (1 byte). - -For ROM compatible devices (and ROM fallback from cfi-flash), the following -additional (optional) property is defined: - - - erase-size : The chip's physical erase block size in bytes. - - The device tree may optionally contain endianness property. - little-endian or big-endian : It Represents the endianness that should be used - by the controller to properly read/write data - from/to the flash. If this property is missing, - the endianness is chosen by the system - (potentially based on extra configuration options). - -The device tree may optionally contain sub-nodes describing partitions of the -address space. See partition.txt for more detail. - -Example: - - flash@ff000000 { - compatible = "amd,am29lv128ml", "cfi-flash"; - reg = <ff000000 01000000>; - bank-width = <4>; - device-width = <1>; - #address-cells = <1>; - #size-cells = <1>; - fs@0 { - label = "fs"; - reg = <0 f80000>; - }; - firmware@f80000 { - label ="firmware"; - reg = <f80000 80000>; - read-only; - }; - }; - -Here an example with multiple "reg" tuples: - - flash@f0000000,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "intel,PC48F4400P0VB", "cfi-flash"; - reg = <0 0x00000000 0x02000000 - 0 0x02000000 0x02000000>; - bank-width = <2>; - partition@0 { - label = "test-part1"; - reg = <0 0x04000000>; - }; - }; - -An example using SRAM: - - sram@2,0 { - compatible = "samsung,k6f1616u6a", "mtd-ram"; - reg = <2 0 0x00200000>; - bank-width = <2>; - }; - -An example using gpio-addrs - - flash@20000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash", "jedec-flash"; - reg = <0x20000000 0x02000000>; - ranges = <0 0x00000000 0x02000000 - 1 0x02000000 0x02000000>; - bank-width = <2>; - addr-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; - partition@0 { - label = "test-part1"; - reg = <0 0x04000000>; - }; - }; diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml new file mode 100644 index 000000000000..13c29cc91b59 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml @@ -0,0 +1,208 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/mtd-physmap.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CFI or JEDEC memory-mapped NOR flash, MTD-RAM (NVRAM...) + +maintainers: + - Rob Herring <robh@kernel.org> + +description: | + Flash chips (Memory Technology Devices) are often used for solid state + file systems on embedded devices. + +properties: + compatible: + oneOf: + - items: + - enum: + - amd,s29gl01gp + - amd,s29gl032a + - amd,s29gl256n + - amd,s29gl512n + - arm,versatile-flash + - cortina,gemini-flash + - cypress,hyperflash + - ge,imp3a-firmware-mirror + - ge,imp3a-paged-flash + - gef,ppc9a-firmware-mirror + - gef,ppc9a-paged-flash + - gef,sbc310-firmware-mirror + - gef,sbc310-paged-flash + - gef,sbc610-firmware-mirror + - gef,sbc610-paged-flash + - intel,28f128j3 + - intel,dt28f160 + - intel,ixp4xx-flash + - intel,JS28F128 + - intel,JS28F640 + - intel,PC28F640P30T85 + - numonyx,js28f00a + - numonyx,js28f128 + - sst,sst39vf320 + - xlnx,xps-mch-emc-2.00.a + - const: cfi-flash + - items: + - enum: + - cypress,cy7c1019dv33-10zsxi + - arm,vexpress-psram + - const: mtd-ram + - enum: + - cfi-flash + - jedec-flash + - mtd-ram + - mtd-rom + + reg: + description: | + It's possible to (optionally) define multiple "reg" tuples so that + non-identical chips can be described in one node. + minItems: 1 + maxItems: 8 + + bank-width: + description: Width (in bytes) of the bank. Equal to the device width times + the number of interleaved chips. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 4 ] + + device-width: + description: + Width of a single mtd chip. If omitted, assumed to be equal to 'bank-width'. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2 ] + + no-unaligned-direct-access: + type: boolean + description: | + Disables the default direct mapping of the flash. + + On some platforms (e.g. MPC5200) a direct 1:1 mapping may cause problems + with JFFS2 usage, as the local bus (LPB) doesn't support unaligned + accesses as implemented in the JFFS2 code via memcpy(). By defining + "no-unaligned-direct-access", the flash will not be exposed directly to + the MTD users (e.g. JFFS2) any more. + + linux,mtd-name: + description: + Allows specifying the mtd name for retro capability with physmap-flash + drivers as boot loader pass the mtd partition via the old device name + physmap-flash. + $ref: /schemas/types.yaml#/definitions/string + + use-advanced-sector-protection: + type: boolean + description: | + Enables support for the advanced sector protection (Spansion: PPB - + Persistent Protection Bits) locking. + + erase-size: + description: The chip's physical erase block size in bytes. + $ref: /schemas/types.yaml#/definitions/uint32 + + addr-gpios: + description: + List of GPIO descriptors that will be used to address the MSBs address + lines. The order goes from LSB to MSB. + minItems: 1 + maxItems: 8 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + big-endian: true + little-endian: true + +patternProperties: + '@[0-9a-f]+$': + $ref: partitions/partition.yaml + +required: + - compatible + - reg + +# FIXME: A parent bus may define timing properties +additionalProperties: true + +examples: + - | + + flash@ff000000 { + compatible = "cfi-flash"; + reg = <0xff000000 0x01000000>; + bank-width = <4>; + device-width = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff000000 0x01000000>; + + fs@0 { + label = "fs"; + reg = <0 0xf80000>; + }; + firmware@f80000 { + label ="firmware"; + reg = <0xf80000 0x80000>; + read-only; + }; + }; + + - | + /* An example with multiple "reg" tuples */ + + flash@0 { + compatible = "intel,PC28F640P30T85", "cfi-flash"; + reg = <0x00000000 0x02000000>, + <0x02000000 0x02000000>; + bank-width = <2>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x04000000>; + + partition@0 { + label = "test-part1"; + reg = <0 0x04000000>; + }; + }; + + - | + /* An example using SRAM */ + bus { + #address-cells = <2>; + #size-cells = <1>; + + sram@2,0 { + compatible = "mtd-ram"; + reg = <2 0 0x00200000>; + bank-width = <2>; + }; + }; + + - | + /* An example using addr-gpios */ + #include <dt-bindings/gpio/gpio.h> + + flash@20000000 { + compatible = "cfi-flash"; + reg = <0x20000000 0x02000000>; + bank-width = <2>; + addr-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00000000 0x02000000>, + <1 0x02000000 0x02000000>; + + partition@0 { + label = "test-part1"; + reg = <0 0x04000000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml new file mode 100644 index 000000000000..376b679cfc70 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/mtd.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/mtd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MTD (Memory Technology Device) Device Tree Bindings + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + - Richard Weinberger <richard@nod.at> + +properties: + $nodename: + pattern: "^flash(@.*)?$" + + label: + description: + User-defined MTD device name. Can be used to assign user friendly + names to MTD devices (instead of the flash model or flash controller + based name) in order to ease flash device identification and/or + describe what they are used for. + +patternProperties: + "^otp(-[0-9]+)?$": + type: object + $ref: ../nvmem/nvmem.yaml# + + description: | + An OTP memory region. Some flashes provide a one-time-programmable + memory whose content can either be programmed by a user or is already + pre-programmed by the factory. Some flashes might provide both. + + properties: + compatible: + enum: + - user-otp + - factory-otp + + required: + - compatible + +additionalProperties: true + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + label = "System-firmware"; + }; + }; + + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + + otp-1 { + compatible = "factory-otp"; + #address-cells = <1>; + #size-cells = <1>; + + electronic-serial-number@0 { + reg = <0 8>; + }; + }; + + otp-2 { + compatible = "user-otp"; + #address-cells = <1>; + #size-cells = <1>; + + mac-address@0 { + reg = <0 6>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml index 678b39952502..bd217e6f5018 100644 --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml @@ -38,6 +38,17 @@ properties: ranges: true + cs-gpios: + minItems: 1 + maxItems: 8 + description: + Array of chip-select available to the controller. The first + entries are a 1:1 mapping of the available chip-select on the + NAND controller (even if they are not used). As many additional + chip-select as needed may follow and should be phandles of GPIO + lines. 'reg' entries of the NAND chip subnodes become indexes of + this array when this property is present. + patternProperties: "^nand@[a-f0-9]$": type: object @@ -164,14 +175,19 @@ examples: nand-controller { #address-cells = <1>; #size-cells = <0>; + cs-gpios = <0>, <&gpioA 1>; /* A single native CS is available */ /* controller specific properties */ nand@0 { - reg = <0>; + reg = <0>; /* Native CS */ nand-use-soft-ecc-engine; nand-ecc-algo = "bch"; /* controller specific properties */ }; + + nand@1 { + reg = <1>; /* GPIO CS */ + }; }; diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt b/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt index b677147ca4e1..c2175d3c82ec 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt +++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt @@ -28,6 +28,11 @@ detected by a software parsing TRX header. Required properties: - compatible : (required) must be "brcm,trx" +Optional properties: + +- brcm,trx-magic: TRX magic, if it is different from the default magic + 0x30524448 as a u32. + Example: flash@0 { diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt deleted file mode 100644 index faa81c2e5da6..000000000000 --- a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt +++ /dev/null @@ -1,51 +0,0 @@ -Bindings for HyperBus Memory Controller (HBMC) on TI's K3 family of SoCs - -Required properties: -- compatible : "ti,am654-hbmc" for AM654 SoC -- reg : Two entries: - First entry pointed to the register space of HBMC controller - Second entry pointing to the memory map region dedicated for - MMIO access to attached flash devices -- ranges : Address translation from offset within CS to allocated MMIO - space in SoC - -Optional properties: -- mux-controls : phandle to the multiplexer that controls selection of - HBMC vs OSPI inside Flash SubSystem (FSS). Default is OSPI, - if property is absent. - See Documentation/devicetree/bindings/mux/reg-mux.txt - for mmio-mux binding details - -Example: - - system-controller@47000000 { - compatible = "syscon", "simple-mfd"; - reg = <0x0 0x47000000 0x0 0x100>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - hbmc_mux: multiplexer { - compatible = "mmio-mux"; - #mux-control-cells = <1>; - mux-reg-masks = <0x4 0x2>; /* 0: reg 0x4, bit 1 */ - }; - }; - - hbmc: hyperbus@47034000 { - compatible = "ti,am654-hbmc"; - reg = <0x0 0x47034000 0x0 0x100>, - <0x5 0x00000000 0x1 0x0000000>; - power-domains = <&k3_pds 55>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0x0 0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */ - <0x1 0x0 0x5 0x04000000 0x4000000>; /* CS1 - 64MB */ - mux-controls = <&hbmc_mux 0>; - - /* Slave flash node */ - flash@0,0 { - compatible = "cypress,hyperflash", "cfi-flash"; - reg = <0x0 0x0 0x4000000>; - }; - }; diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml new file mode 100644 index 000000000000..30b458c41cac --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/ti,am654-hbmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HyperBus Memory Controller (HBMC) on TI's K3 family of SoCs + +maintainers: + - Vignesh Raghavendra <vigneshr@ti.com> + +properties: + compatible: + const: ti,am654-hbmc + + reg: + maxItems: 2 + + power-domains: true + '#address-cells': true + '#size-cells': true + ranges: true + + mux-controls: + description: MMIO mux controller node to select b/w OSPI and HBMC. + + clocks: + maxItems: 1 + +patternProperties: + "^flash@[0-1],[0-9a-f]+$": + type: object + +required: + - compatible + - reg + - ranges + - clocks + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + hbmc: memory-controller@47034000 { + compatible = "ti,am654-hbmc"; + reg = <0x0 0x47034000 0x0 0x100>, + <0x5 0x00000000 0x1 0x0000000>; + ranges = <0x0 0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */ + <0x1 0x0 0x5 0x04000000 0x4000000>; /* CS1 - 64MB */ + clocks = <&k3_clks 102 0>; + #address-cells = <2>; + #size-cells = <1>; + power-domains = <&k3_pds 55>; + mux-controls = <&hbmc_mux 0>; + + flash@0,0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mux/adi,adg792a.txt b/Documentation/devicetree/bindings/mux/adi,adg792a.txt index 96b787a69f50..b0e5bf6903d8 100644 --- a/Documentation/devicetree/bindings/mux/adi,adg792a.txt +++ b/Documentation/devicetree/bindings/mux/adi,adg792a.txt @@ -5,7 +5,7 @@ Required properties: - #mux-control-cells : <0> if parallel (the three muxes are bound together with a single mux controller controlling all three muxes), or <1> if not (one mux controller for each mux). -* Standard mux-controller bindings as described in mux-controller.txt +* Standard mux-controller bindings as described in mux-controller.yaml Optional properties for ADG792G: - gpio-controller : if present, #gpio-cells below is required. diff --git a/Documentation/devicetree/bindings/mux/adi,adgs1408.txt b/Documentation/devicetree/bindings/mux/adi,adgs1408.txt index be6947f4d86b..453a38961c13 100644 --- a/Documentation/devicetree/bindings/mux/adi,adgs1408.txt +++ b/Documentation/devicetree/bindings/mux/adi,adgs1408.txt @@ -4,7 +4,7 @@ Required properties: - compatible : Should be one of * "adi,adgs1408" * "adi,adgs1409" -* Standard mux-controller bindings as described in mux-controller.txt +* Standard mux-controller bindings as described in mux-controller.yaml Optional properties for ADGS1408/1409: - gpio-controller : if present, #gpio-cells is required. diff --git a/Documentation/devicetree/bindings/mux/gpio-mux.txt b/Documentation/devicetree/bindings/mux/gpio-mux.txt deleted file mode 100644 index b8f746344d80..000000000000 --- a/Documentation/devicetree/bindings/mux/gpio-mux.txt +++ /dev/null @@ -1,69 +0,0 @@ -GPIO-based multiplexer controller bindings - -Define what GPIO pins are used to control a multiplexer. Or several -multiplexers, if the same pins control more than one multiplexer. - -Required properties: -- compatible : "gpio-mux" -- mux-gpios : list of gpios used to control the multiplexer, least - significant bit first. -- #mux-control-cells : <0> -* Standard mux-controller bindings as decribed in mux-controller.txt - -Optional properties: -- idle-state : if present, the state the mux will have when idle. The - special state MUX_IDLE_AS_IS is the default. - -The multiplexer state is defined as the number represented by the -multiplexer GPIO pins, where the first pin is the least significant -bit. An active pin is a binary 1, an inactive pin is a binary 0. - -Example: - - mux: mux-controller { - compatible = "gpio-mux"; - #mux-control-cells = <0>; - - mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, - <&pioA 1 GPIO_ACTIVE_HIGH>; - }; - - adc-mux { - compatible = "io-channel-mux"; - io-channels = <&adc 0>; - io-channel-names = "parent"; - - mux-controls = <&mux>; - - channels = "sync-1", "in", "out", "sync-2"; - }; - - i2c-mux { - compatible = "i2c-mux"; - i2c-parent = <&i2c1>; - - mux-controls = <&mux>; - - #address-cells = <1>; - #size-cells = <0>; - - i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - ssd1307: oled@3c { - /* ... */ - }; - }; - - i2c@3 { - reg = <3>; - #address-cells = <1>; - #size-cells = <0>; - - pca9555: pca9555@20 { - /* ... */ - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mux/gpio-mux.yaml b/Documentation/devicetree/bindings/mux/gpio-mux.yaml new file mode 100644 index 000000000000..0a7c8d64981a --- /dev/null +++ b/Documentation/devicetree/bindings/mux/gpio-mux.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mux/gpio-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO-based multiplexer controller bindings + +maintainers: + - Peter Rosin <peda@axentia.se> + +description: |+ + Define what GPIO pins are used to control a multiplexer. Or several + multiplexers, if the same pins control more than one multiplexer. + + The multiplexer state is defined as the number represented by the + multiplexer GPIO pins, where the first pin is the least significant + bit. An active pin is a binary 1, an inactive pin is a binary 0. + +properties: + compatible: + const: gpio-mux + + mux-gpios: + description: + List of gpios used to control the multiplexer, least significant bit first. + + '#mux-control-cells': + const: 0 + + idle-state: + default: -1 + +required: + - compatible + - mux-gpios + - "#mux-control-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, + <&pioA 1 GPIO_ACTIVE_HIGH>; + }; + + adc-mux { + compatible = "io-channel-mux"; + io-channels = <&adc 0>; + io-channel-names = "parent"; + + mux-controls = <&mux>; + + channels = "sync-1", "in", "out", "sync-2"; + }; + + i2c-mux { + compatible = "i2c-mux"; + i2c-parent = <&i2c1>; + + mux-controls = <&mux>; + + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + ssd1307: oled@3c { + reg = <0x3c>; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + pca9555: pca9555@20 { + reg = <0x20>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mux/mux-consumer.yaml b/Documentation/devicetree/bindings/mux/mux-consumer.yaml new file mode 100644 index 000000000000..7af93298ab5c --- /dev/null +++ b/Documentation/devicetree/bindings/mux/mux-consumer.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mux/mux-consumer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common multiplexer controller consumer bindings + +maintainers: + - Peter Rosin <peda@axentia.se> + +description: | + Mux controller consumers should specify a list of mux controllers that they + want to use with a property containing a 'mux-ctrl-list': + + mux-ctrl-list ::= <single-mux-ctrl> [mux-ctrl-list] + single-mux-ctrl ::= <mux-ctrl-phandle> [mux-ctrl-specifier] + mux-ctrl-phandle : phandle to mux controller node + mux-ctrl-specifier : array of #mux-control-cells specifying the + given mux controller (controller specific) + + Mux controller properties should be named "mux-controls". The exact meaning of + each mux controller property must be documented in the device tree binding for + each consumer. An optional property "mux-control-names" may contain a list of + strings to label each of the mux controllers listed in the "mux-controls" + property. + + mux-ctrl-specifier typically encodes the chip-relative mux controller number. + If the mux controller chip only provides a single mux controller, the + mux-ctrl-specifier can typically be left out. + +select: true + +properties: + mux-controls: + $ref: /schemas/types.yaml#/definitions/phandle-array + + mux-control-names: + description: + Devices that use more than a single mux controller can use the + "mux-control-names" property to map the name of the requested mux + controller to an index into the list given by the "mux-controls" property. + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/mux/mux-controller.txt b/Documentation/devicetree/bindings/mux/mux-controller.txt deleted file mode 100644 index 4f47e4bd2fa0..000000000000 --- a/Documentation/devicetree/bindings/mux/mux-controller.txt +++ /dev/null @@ -1,157 +0,0 @@ -Common multiplexer controller bindings -====================================== - -A multiplexer (or mux) controller will have one, or several, consumer devices -that uses the mux controller. Thus, a mux controller can possibly control -several parallel multiplexers. Presumably there will be at least one -multiplexer needed by each consumer, but a single mux controller can of course -control several multiplexers for a single consumer. - -A mux controller provides a number of states to its consumers, and the state -space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer, -0-7 for an 8-way multiplexer, etc. - - -Consumers ---------- - -Mux controller consumers should specify a list of mux controllers that they -want to use with a property containing a 'mux-ctrl-list': - - mux-ctrl-list ::= <single-mux-ctrl> [mux-ctrl-list] - single-mux-ctrl ::= <mux-ctrl-phandle> [mux-ctrl-specifier] - mux-ctrl-phandle : phandle to mux controller node - mux-ctrl-specifier : array of #mux-control-cells specifying the - given mux controller (controller specific) - -Mux controller properties should be named "mux-controls". The exact meaning of -each mux controller property must be documented in the device tree binding for -each consumer. An optional property "mux-control-names" may contain a list of -strings to label each of the mux controllers listed in the "mux-controls" -property. - -Drivers for devices that use more than a single mux controller can use the -"mux-control-names" property to map the name of the requested mux controller -to an index into the list given by the "mux-controls" property. - -mux-ctrl-specifier typically encodes the chip-relative mux controller number. -If the mux controller chip only provides a single mux controller, the -mux-ctrl-specifier can typically be left out. - -Example: - - /* One consumer of a 2-way mux controller (one GPIO-line) */ - mux: mux-controller { - compatible = "gpio-mux"; - #mux-control-cells = <0>; - - mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>; - }; - - adc-mux { - compatible = "io-channel-mux"; - io-channels = <&adc 0>; - io-channel-names = "parent"; - - mux-controls = <&mux>; - mux-control-names = "adc"; - - channels = "sync", "in"; - }; - -Note that in the example above, specifying the "mux-control-names" is redundant -because there is only one mux controller in the list. However, if the driver -for the consumer node in fact asks for a named mux controller, that name is of -course still required. - - /* - * Two consumers (one for an ADC line and one for an i2c bus) of - * parallel 4-way multiplexers controlled by the same two GPIO-lines. - */ - mux: mux-controller { - compatible = "gpio-mux"; - #mux-control-cells = <0>; - - mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, - <&pioA 1 GPIO_ACTIVE_HIGH>; - }; - - adc-mux { - compatible = "io-channel-mux"; - io-channels = <&adc 0>; - io-channel-names = "parent"; - - mux-controls = <&mux>; - - channels = "sync-1", "in", "out", "sync-2"; - }; - - i2c-mux { - compatible = "i2c-mux"; - i2c-parent = <&i2c1>; - - mux-controls = <&mux>; - - #address-cells = <1>; - #size-cells = <0>; - - i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - ssd1307: oled@3c { - /* ... */ - }; - }; - - i2c@3 { - reg = <3>; - #address-cells = <1>; - #size-cells = <0>; - - pca9555: pca9555@20 { - /* ... */ - }; - }; - }; - - -Mux controller nodes --------------------- - -Mux controller nodes must specify the number of cells used for the -specifier using the '#mux-control-cells' property. - -Optionally, mux controller nodes can also specify the state the mux should -have when it is idle. The idle-state property is used for this. If the -idle-state is not present, the mux controller is typically left as is when -it is idle. For multiplexer chips that expose several mux controllers, the -idle-state property is an array with one idle state for each mux controller. - -The special value (-1) may be used to indicate that the mux should be left -as is when it is idle. This is the default, but can still be useful for -mux controller chips with more than one mux controller, particularly when -there is a need to "step past" a mux controller and set some other idle -state for a mux controller with a higher index. - -Some mux controllers have the ability to disconnect the input/output of the -multiplexer. Using this disconnected high-impedance state as the idle state -is indicated with idle state (-2). - -These constants are available in - - #include <dt-bindings/mux/mux.h> - -as MUX_IDLE_AS_IS (-1) and MUX_IDLE_DISCONNECT (-2). - -An example mux controller node look like this (the adg972a chip is a triple -4-way multiplexer): - - mux: mux-controller@50 { - compatible = "adi,adg792a"; - reg = <0x50>; - #mux-control-cells = <1>; - - idle-state = <MUX_IDLE_DISCONNECT MUX_IDLE_AS_IS 2>; - }; diff --git a/Documentation/devicetree/bindings/mux/mux-controller.yaml b/Documentation/devicetree/bindings/mux/mux-controller.yaml new file mode 100644 index 000000000000..736a84c3b6a5 --- /dev/null +++ b/Documentation/devicetree/bindings/mux/mux-controller.yaml @@ -0,0 +1,182 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mux/mux-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common multiplexer controller provider bindings + +maintainers: + - Peter Rosin <peda@axentia.se> + +description: | + A multiplexer (or mux) controller will have one, or several, consumer devices + that uses the mux controller. Thus, a mux controller can possibly control + several parallel multiplexers. Presumably there will be at least one + multiplexer needed by each consumer, but a single mux controller can of course + control several multiplexers for a single consumer. + + A mux controller provides a number of states to its consumers, and the state + space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer, + 0-7 for an 8-way multiplexer, etc. + + + Mux controller nodes + -------------------- + + Mux controller nodes must specify the number of cells used for the + specifier using the '#mux-control-cells' property. + + Optionally, mux controller nodes can also specify the state the mux should + have when it is idle. The idle-state property is used for this. If the + idle-state is not present, the mux controller is typically left as is when + it is idle. For multiplexer chips that expose several mux controllers, the + idle-state property is an array with one idle state for each mux controller. + + The special value (-1) may be used to indicate that the mux should be left + as is when it is idle. This is the default, but can still be useful for + mux controller chips with more than one mux controller, particularly when + there is a need to "step past" a mux controller and set some other idle + state for a mux controller with a higher index. + + Some mux controllers have the ability to disconnect the input/output of the + multiplexer. Using this disconnected high-impedance state as the idle state + is indicated with idle state (-2). + + These constants are available in + + #include <dt-bindings/mux/mux.h> + + as MUX_IDLE_AS_IS (-1) and MUX_IDLE_DISCONNECT (-2). + + An example mux controller node look like this (the adg972a chip is a triple + 4-way multiplexer): + + mux: mux-controller@50 { + compatible = "adi,adg792a"; + reg = <0x50>; + #mux-control-cells = <1>; + + idle-state = <MUX_IDLE_DISCONNECT MUX_IDLE_AS_IS 2>; + }; + +select: + anyOf: + - properties: + $nodename: + pattern: '^mux-controller' + - required: + - '#mux-control-cells' + +properties: + $nodename: + pattern: '^mux-controller(@.*|-[0-9a-f]+)?$' + + '#mux-control-cells': + enum: [ 0, 1 ] + + idle-state: + $ref: /schemas/types.yaml#/definitions/int32 + minimum: -2 + + idle-states: + description: | + Mux controller nodes can specify the state the mux should have when it is + idle. If the idle-state is not present, the mux controller is typically + left as is when it is idle. For multiplexer chips that expose several mux + controllers, the idle-state property is an array with one idle state for + each mux controller. + + The special value (-1) may be used to indicate that the mux should be left + as is when it is idle. This is the default, but can still be useful for + mux controller chips with more than one mux controller, particularly when + there is a need to "step past" a mux controller and set some other idle + state for a mux controller with a higher index. + + Some mux controllers have the ability to disconnect the input/output of the + multiplexer. Using this disconnected high-impedance state as the idle state + is indicated with idle state (-2). + $ref: /schemas/types.yaml#/definitions/int32-array + items: + minimum: -2 + +additionalProperties: true + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + /* One consumer of a 2-way mux controller (one GPIO-line) */ + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>; + }; + + adc-mux { + compatible = "io-channel-mux"; + io-channels = <&adc 0>; + io-channel-names = "parent"; + + mux-controls = <&mux>; + mux-control-names = "adc"; + + channels = "sync", "in"; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + + /* + * Two consumers (one for an ADC line and one for an i2c bus) of + * parallel 4-way multiplexers controlled by the same two GPIO-lines. + */ + mux2: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, + <&pioA 1 GPIO_ACTIVE_HIGH>; + }; + + adc-mux { + compatible = "io-channel-mux"; + io-channels = <&adc 0>; + io-channel-names = "parent"; + + mux-controls = <&mux2>; + + channels = "sync-1", "in", "out", "sync-2"; + }; + + i2c-mux { + compatible = "i2c-mux"; + i2c-parent = <&i2c1>; + + mux-controls = <&mux2>; + + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + ssd1307: oled@3c { + reg = <0x3c>; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + pca9555: pca9555@20 { + reg = <0x20>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mux/reg-mux.txt b/Documentation/devicetree/bindings/mux/reg-mux.txt deleted file mode 100644 index 4afd7ba73d60..000000000000 --- a/Documentation/devicetree/bindings/mux/reg-mux.txt +++ /dev/null @@ -1,129 +0,0 @@ -Generic register bitfield-based multiplexer controller bindings - -Define register bitfields to be used to control multiplexers. The parent -device tree node must be a device node to provide register r/w access. - -Required properties: -- compatible : should be one of - "reg-mux" : if parent device of mux controller is not syscon device - "mmio-mux" : if parent device of mux controller is syscon device -- #mux-control-cells : <1> -- mux-reg-masks : an array of register offset and pre-shifted bitfield mask - pairs, each describing a single mux control. -* Standard mux-controller bindings as decribed in mux-controller.txt - -Optional properties: -- idle-states : if present, the state the muxes will have when idle. The - special state MUX_IDLE_AS_IS is the default. - -The multiplexer state of each multiplexer is defined as the value of the -bitfield described by the corresponding register offset and bitfield mask -pair in the mux-reg-masks array. - -Example 1: -The parent device of mux controller is not a syscon device. - -&i2c0 { - fpga@66 { // fpga connected to i2c - compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c", - "simple-mfd"; - reg = <0x66>; - - mux: mux-controller { - compatible = "reg-mux"; - #mux-control-cells = <1>; - mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */ - <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */ - }; - }; -}; - -mdio-mux-1 { - compatible = "mdio-mux-multiplexer"; - mux-controls = <&mux 0>; - mdio-parent-bus = <&emdio1>; - #address-cells = <1>; - #size-cells = <0>; - - mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - mdio@8 { - reg = <0x8>; - #address-cells = <1>; - #size-cells = <0>; - }; - - .. - .. -}; - -mdio-mux-2 { - compatible = "mdio-mux-multiplexer"; - mux-controls = <&mux 1>; - mdio-parent-bus = <&emdio2>; - #address-cells = <1>; - #size-cells = <0>; - - mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - mdio@1 { - reg = <0x1>; - #address-cells = <1>; - #size-cells = <0>; - }; - - .. - .. -}; - -Example 2: -The parent device of mux controller is syscon device. - -syscon { - compatible = "syscon"; - - mux: mux-controller { - compatible = "mmio-mux"; - #mux-control-cells = <1>; - - mux-reg-masks = <0x3 0x30>, /* 0: reg 0x3, bits 5:4 */ - <0x3 0x40>, /* 1: reg 0x3, bit 6 */ - idle-states = <MUX_IDLE_AS_IS>, <0>; - }; -}; - -video-mux { - compatible = "video-mux"; - mux-controls = <&mux 0>; - #address-cells = <1>; - #size-cells = <0>; - - ports { - /* inputs 0..3 */ - port@0 { - reg = <0>; - }; - port@1 { - reg = <1>; - }; - port@2 { - reg = <2>; - }; - port@3 { - reg = <3>; - }; - - /* output */ - port@4 { - reg = <4>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mux/reg-mux.yaml b/Documentation/devicetree/bindings/mux/reg-mux.yaml new file mode 100644 index 000000000000..60d5746eb39d --- /dev/null +++ b/Documentation/devicetree/bindings/mux/reg-mux.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mux/reg-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic register bitfield-based multiplexer controller bindings + +maintainers: + - Peter Rosin <peda@axentia.se> + +description: |+ + Define register bitfields to be used to control multiplexers. The parent + device tree node must be a device node to provide register r/w access. + +properties: + compatible: + enum: + - reg-mux # parent device of mux controller is not syscon device + - mmio-mux # parent device of mux controller is syscon device + + reg: true + + '#mux-control-cells': + const: 1 + + mux-reg-masks: + description: an array of register offset and pre-shifted bitfield mask + pairs, each describing a single mux control. + + idle-states: true + +required: + - compatible + - mux-reg-masks + - '#mux-control-cells' + +additionalProperties: false + +examples: + - | + /* The parent device of mux controller is not a syscon device. */ + + #include <dt-bindings/mux/mux.h> + + mux-controller { + compatible = "reg-mux"; + #mux-control-cells = <1>; + mux-reg-masks = + <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */ + <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */ + }; + + mdio-mux-1 { + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux1 0>; + mdio-parent-bus = <&emdio1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@8 { + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + mdio-mux-2 { + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux1 1>; + mdio-parent-bus = <&emdio2>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + - | + /* The parent device of mux controller is syscon device. */ + + #include <dt-bindings/mux/mux.h> + syscon@1000 { + compatible = "fsl,imx7d-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd"; + reg = <0x1000 0x100>; + + mux2: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + + mux-reg-masks = + <0x3 0x30>, /* 0: reg 0x3, bits 5:4 */ + <0x3 0x40>; /* 1: reg 0x3, bit 6 */ + idle-states = <MUX_IDLE_AS_IS>, <0>; + }; + }; + + video-mux { + compatible = "video-mux"; + mux-controls = <&mux2 0>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* inputs 0..3 */ + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + port@2 { + reg = <2>; + }; + port@3 { + reg = <3>; + }; + + /* output */ + port@4 { + reg = <4>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml index 0467441d7037..608e1d62bed5 100644 --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml @@ -43,7 +43,6 @@ allOf: properties: clocks: minItems: 3 - maxItems: 4 items: - description: GMAC main clock - description: First parent clock of the internal mux @@ -52,7 +51,6 @@ allOf: clock-names: minItems: 3 - maxItems: 4 items: - const: stmmaceth - const: clkin0 diff --git a/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml index 2f46e45dcd60..a93d2f165899 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml +++ b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml @@ -23,14 +23,12 @@ properties: interrupts: minItems: 1 - maxItems: 2 items: - description: RX interrupt - description: TX interrupt interrupt-names: minItems: 1 - maxItems: 2 items: - const: rx - const: tx diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt deleted file mode 100644 index 8ba9ed11d716..000000000000 --- a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt +++ /dev/null @@ -1,23 +0,0 @@ -* Broadcom iProc MDIO bus controller - -Required properties: -- compatible: should be "brcm,iproc-mdio" -- reg: address and length of the register set for the MDIO interface -- #size-cells: must be 1 -- #address-cells: must be 0 - -Child nodes of this MDIO bus controller node are standard Ethernet PHY device -nodes as described in Documentation/devicetree/bindings/net/phy.txt - -Example: - -mdio@18002000 { - compatible = "brcm,iproc-mdio"; - reg = <0x18002000 0x8>; - #size-cells = <1>; - #address-cells = <0>; - - enet-gphy@0 { - reg = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml new file mode 100644 index 000000000000..3031395f7e6e --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,iproc-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom iProc MDIO bus controller + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +allOf: + - $ref: mdio.yaml# + +properties: + compatible: + const: brcm,iproc-mdio + + reg: + maxItems: 1 + +unevaluatedProperties: false + +required: + - reg + +examples: + - | + mdio@18002000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18002000 0x8>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt index b58843f29591..deb9e852ea27 100644 --- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt +++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt @@ -17,7 +17,7 @@ Optional properties: - clocks: phandle of the core clock which drives the mdio block. Additional information regarding generic multiplexer properties can be found -at- Documentation/devicetree/bindings/net/mdio-mux.txt +at- Documentation/devicetree/bindings/net/mdio-mux.yaml for example: diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index 798fa5fb7bb2..f84e31348d80 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -30,14 +30,12 @@ properties: - description: interrupt line0 - description: interrupt line1 minItems: 1 - maxItems: 2 interrupt-names: items: - const: int0 - const: int1 minItems: 1 - maxItems: 2 clocks: items: diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt index 2d504256b0d8..366479806acb 100644 --- a/Documentation/devicetree/bindings/net/can/c_can.txt +++ b/Documentation/devicetree/bindings/net/can/c_can.txt @@ -19,10 +19,10 @@ The following are mandatory properties for Keystone 2 66AK2G SoCs only: - power-domains : Should contain a phandle to a PM domain provider node and an args specifier containing the DCAN device id value. This property is as per the binding, - Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml - clocks : CAN functional clock phandle. This property is as per the binding, - Documentation/devicetree/bindings/clock/ti,sci-clk.txt + Documentation/devicetree/bindings/clock/ti,sci-clk.yaml Optional properties: - syscon-raminit : Handle to system control region that contains the diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt deleted file mode 100644 index 90ac4fef23f5..000000000000 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ /dev/null @@ -1,80 +0,0 @@ -Renesas R-Car CAN controller Device Tree Bindings -------------------------------------------------- - -Required properties: -- compatible: "renesas,can-r8a7742" if CAN controller is a part of R8A7742 SoC. - "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC. - "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC. - "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC. - "renesas,can-r8a77470" if CAN controller is a part of R8A77470 SoC. - "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC. - "renesas,can-r8a774b1" if CAN controller is a part of R8A774B1 SoC. - "renesas,can-r8a774c0" if CAN controller is a part of R8A774C0 SoC. - "renesas,can-r8a774e1" if CAN controller is a part of R8A774E1 SoC. - "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. - "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC. - "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC. - "renesas,can-r8a7791" if CAN controller is a part of R8A7791 SoC. - "renesas,can-r8a7792" if CAN controller is a part of R8A7792 SoC. - "renesas,can-r8a7793" if CAN controller is a part of R8A7793 SoC. - "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC. - "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC. - "renesas,can-r8a7796" if CAN controller is a part of R8A77960 SoC. - "renesas,can-r8a77961" if CAN controller is a part of R8A77961 SoC. - "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC. - "renesas,can-r8a77990" if CAN controller is a part of R8A77990 SoC. - "renesas,can-r8a77995" if CAN controller is a part of R8A77995 SoC. - "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. - "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 - compatible device. - "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2 - compatible device. - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - -- reg: physical base address and size of the R-Car CAN register map. -- interrupts: interrupt specifier for the sole interrupt. -- clocks: phandles and clock specifiers for 3 CAN clock inputs. -- clock-names: 3 clock input name strings: "clkp1", "clkp2", and "can_clk". -- pinctrl-0: pin control group to be used for this controller. -- pinctrl-names: must be "default". - -Required properties for R8A774A1, R8A774B1, R8A774C0, R8A774E1, R8A7795, -R8A77960, R8A77961, R8A77965, R8A77990, and R8A77995: -For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can -be used by both CAN and CAN FD controller at the same time. It needs to be -scaled to maximum frequency if any of these controllers use it. This is done -using the below properties: - -- assigned-clocks: phandle of clkp2(CANFD) clock. -- assigned-clock-rates: maximum frequency of this clock. - -Optional properties: -- renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are: - <0x0> (default) : Peripheral clock (clkp1) - <0x1> : Peripheral clock (clkp2) - <0x3> : External input clock - -Example -------- - -SoC common .dtsi file: - - can0: can@e6e80000 { - compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can"; - reg = <0 0xe6e80000 0 0x1000>; - interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp9_clks R8A7791_CLK_RCAN0>, - <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; - clock-names = "clkp1", "clkp2", "can_clk"; - status = "disabled"; - }; - -Board specific .dts file: - -&can0 { - pinctrl-0 = <&can0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; diff --git a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt deleted file mode 100644 index 248c4ed97a0a..000000000000 --- a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt +++ /dev/null @@ -1,107 +0,0 @@ -Renesas R-Car CAN FD controller Device Tree Bindings ----------------------------------------------------- - -Required properties: -- compatible: Must contain one or more of the following: - - "renesas,rcar-gen3-canfd" for R-Car Gen3 and RZ/G2 compatible controllers. - - "renesas,r8a774a1-canfd" for R8A774A1 (RZ/G2M) compatible controller. - - "renesas,r8a774b1-canfd" for R8A774B1 (RZ/G2N) compatible controller. - - "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller. - - "renesas,r8a774e1-canfd" for R8A774E1 (RZ/G2H) compatible controller. - - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller. - - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller. - - "renesas,r8a77965-canfd" for R8A77965 (R-Car M3-N) compatible controller. - - "renesas,r8a77970-canfd" for R8A77970 (R-Car V3M) compatible controller. - - "renesas,r8a77980-canfd" for R8A77980 (R-Car V3H) compatible controller. - - "renesas,r8a77990-canfd" for R8A77990 (R-Car E3) compatible controller. - - "renesas,r8a77995-canfd" for R8A77995 (R-Car D3) compatible controller. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first, followed by the - family-specific and/or generic versions. - -- reg: physical base address and size of the R-Car CAN FD register map. -- interrupts: interrupt specifiers for the Channel & Global interrupts -- clocks: phandles and clock specifiers for 3 clock inputs. -- clock-names: 3 clock input name strings: "fck", "canfd", "can_clk". -- pinctrl-0: pin control group to be used for this controller. -- pinctrl-names: must be "default". - -Required child nodes: -The controller supports two channels and each is represented as a child node. -The name of the child nodes are "channel0" and "channel1" respectively. Each -child node supports the "status" property only, which is used to -enable/disable the respective channel. - -Required properties for R8A774A1, R8A774B1, R8A774C0, R8A774E1, R8A7795, -R8A7796, R8A77965, R8A77990, and R8A77995: -In the denoted SoCs, canfd clock is a div6 clock and can be used by both CAN -and CAN FD controller at the same time. It needs to be scaled to maximum -frequency if any of these controllers use it. This is done using the below -properties: - -- assigned-clocks: phandle of canfd clock. -- assigned-clock-rates: maximum frequency of this clock. - -Optional property: -The controller can operate in either CAN FD only mode (default) or -Classical CAN only mode. The mode is global to both the channels. In order to -enable the later, define the following optional property. - - renesas,no-can-fd: puts the controller in Classical CAN only mode. - -Example -------- - -SoC common .dtsi file: - - canfd: can@e66c0000 { - compatible = "renesas,r8a7795-canfd", - "renesas,rcar-gen3-canfd"; - reg = <0 0xe66c0000 0 0x8000>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 914>, - <&cpg CPG_CORE R8A7795_CLK_CANFD>, - <&can_clk>; - clock-names = "fck", "canfd", "can_clk"; - assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; - assigned-clock-rates = <40000000>; - power-domains = <&cpg>; - status = "disabled"; - - channel0 { - status = "disabled"; - }; - - channel1 { - status = "disabled"; - }; - }; - -Board specific .dts file: - -E.g. below enables Channel 1 alone in the board in Classical CAN only mode. - -&canfd { - pinctrl-0 = <&canfd1_pins>; - pinctrl-names = "default"; - renesas,no-can-fd; - status = "okay"; - - channel1 { - status = "okay"; - }; -}; - -E.g. below enables Channel 0 alone in the board using External clock -as fCAN clock. - -&canfd { - pinctrl-0 = <&canfd0_pins>, <&can_clk_pins>; - pinctrl-names = "default"; - status = "okay"; - - channel0 { - status = "okay"; - }; -}; diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml new file mode 100644 index 000000000000..fadc871fd6b0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/renesas,rcar-can.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car CAN Controller + +maintainers: + - Sergei Shtylyov <sergei.shtylyov@gmail.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,can-r8a7778 # R-Car M1-A + - renesas,can-r8a7779 # R-Car H1 + - const: renesas,rcar-gen1-can # R-Car Gen1 + + - items: + - enum: + - renesas,can-r8a7742 # RZ/G1H + - renesas,can-r8a7743 # RZ/G1M + - renesas,can-r8a7744 # RZ/G1N + - renesas,can-r8a7745 # RZ/G1E + - renesas,can-r8a77470 # RZ/G1C + - renesas,can-r8a7790 # R-Car H2 + - renesas,can-r8a7791 # R-Car M2-W + - renesas,can-r8a7792 # R-Car V2H + - renesas,can-r8a7793 # R-Car M2-N + - renesas,can-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-can # R-Car Gen2 and RZ/G1 + + - items: + - enum: + - renesas,can-r8a774a1 # RZ/G2M + - renesas,can-r8a774b1 # RZ/G2N + - renesas,can-r8a774c0 # RZ/G2E + - renesas,can-r8a774e1 # RZ/G2H + - renesas,can-r8a7795 # R-Car H3 + - renesas,can-r8a7796 # R-Car M3-W + - renesas,can-r8a77961 # R-Car M3-W+ + - renesas,can-r8a77965 # R-Car M3-N + - renesas,can-r8a77990 # R-Car E3 + - renesas,can-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-can # R-Car Gen3 and RZ/G2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: clkp1 + - const: clkp2 + - const: can_clk + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + renesas,can-clock-select: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 3 ] + default: 0 + description: | + R-Car CAN Clock Source Select. Valid values are: + <0x0> (default) : Peripheral clock (clkp1) + <0x1> : Peripheral clock (clkp2) + <0x3> : External input clock + + assigned-clocks: + description: + Reference to the clkp2 (CANFD) clock. + On R-Car Gen3 and RZ/G2 SoCs, "clkp2" is the CANFD clock. This is a div6 + clock and can be used by both CAN and CAN FD controllers at the same + time. It needs to be scaled to maximum frequency if any of these + controllers use it. + + assigned-clock-rates: + description: Maximum frequency of the CANFD clock. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +allOf: + - $ref: can-controller.yaml# + + - if: + not: + properties: + compatible: + contains: + const: renesas,rcar-gen1-can + then: + required: + - resets + + - if: + properties: + compatible: + contains: + const: renesas,rcar-gen3-can + then: + required: + - assigned-clocks + - assigned-clock-rates + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7791-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7791-sysc.h> + + can0: can@e6e80000 { + compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can"; + reg = <0xe6e80000 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7791_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 916>; + }; diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml new file mode 100644 index 000000000000..0b33ba9ccb47 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/renesas,rcar-canfd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car CAN FD Controller + +maintainers: + - Fabrizio Castro <fabrizio.castro.jz@renesas.com> + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,r8a774a1-canfd # RZ/G2M + - renesas,r8a774b1-canfd # RZ/G2N + - renesas,r8a774c0-canfd # RZ/G2E + - renesas,r8a774e1-canfd # RZ/G2H + - renesas,r8a7795-canfd # R-Car H3 + - renesas,r8a7796-canfd # R-Car M3-W + - renesas,r8a77965-canfd # R-Car M3-N + - renesas,r8a77970-canfd # R-Car V3M + - renesas,r8a77980-canfd # R-Car V3H + - renesas,r8a77990-canfd # R-Car E3 + - renesas,r8a77995-canfd # R-Car D3 + - const: renesas,rcar-gen3-canfd # R-Car Gen3 and RZ/G2 + + reg: + maxItems: 1 + + interrupts: + items: + - description: Channel interrupt + - description: Global interrupt + + clocks: + maxItems: 3 + + clock-names: + items: + - const: fck + - const: canfd + - const: can_clk + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + renesas,no-can-fd: + $ref: /schemas/types.yaml#/definitions/flag + description: + The controller can operate in either CAN FD only mode (default) or + Classical CAN only mode. The mode is global to both the channels. + Specify this property to put the controller in Classical CAN only mode. + + assigned-clocks: + description: + Reference to the CANFD clock. The CANFD clock is a div6 clock and can be + used by both CAN (if present) and CAN FD controllers at the same time. + It needs to be scaled to maximum frequency if any of these controllers + use it. + + assigned-clock-rates: + description: Maximum frequency of the CANFD clock. + +patternProperties: + "^channel[01]$": + type: object + description: + The controller supports two channels and each is represented as a child + node. Each child node supports the "status" property only, which + is used to enable/disable the respective channel. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - resets + - assigned-clocks + - assigned-clock-rates + - channel0 + - channel1 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + canfd: can@e66c0000 { + compatible = "renesas,r8a7795-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0xe66c0000 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A7795_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 914>; + + channel0 { + }; + + channel1 { + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml index d730fe5a4355..d159ac78cec1 100644 --- a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml +++ b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml @@ -48,14 +48,12 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: switch's main clock - description: dividing of the switch core clock clock-names: minItems: 1 - maxItems: 2 items: - const: sw_switch - const: sw_switch_mdiv diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt index de04626a8e9d..18247ebfc487 100644 --- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt +++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt @@ -81,6 +81,12 @@ Optional properties: - gpio-controller: Boolean; if defined, MT7530's LED controller will run on GPIO mode. - #gpio-cells: Must be 2 if gpio-controller is defined. +- interrupt-controller: Boolean; Enables the internal interrupt controller. + +If interrupt-controller is defined, the following properties are required. + +- #interrupt-cells: Must be 1. +- interrupts: Parent interrupt for the interrupt controller. See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required, optional properties and how the integrated switch subnodes must diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml new file mode 100644 index 000000000000..0b8a05dd52e6 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/nxp,sja1105.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP SJA1105 Automotive Ethernet Switch Family Device Tree Bindings + +description: + The SJA1105 SPI interface requires a CS-to-CLK time (t2 in UM10944.pdf) of at + least one half of t_CLK. At an SPI frequency of 1MHz, this means a minimum + cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed + depends on the SPI bus master driver. + +allOf: + - $ref: "dsa.yaml#" + +maintainers: + - Vladimir Oltean <vladimir.oltean@nxp.com> + +properties: + compatible: + enum: + - nxp,sja1105e + - nxp,sja1105t + - nxp,sja1105p + - nxp,sja1105q + - nxp,sja1105r + - nxp,sja1105s + - nxp,sja1110a + - nxp,sja1110b + - nxp,sja1110c + - nxp,sja1110d + + reg: + maxItems: 1 + + # Optional container node for the 2 internal MDIO buses of the SJA1110 + # (one for the internal 100base-T1 PHYs and the other for the single + # 100base-TX PHY). The "reg" property does not have physical significance. + # The PHY addresses to port correspondence is as follows: for 100base-T1, + # port 5 has PHY 1, port 6 has PHY 2 etc, while for 100base-TX, port 1 has + # PHY 1. + mdios: + type: object + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + patternProperties: + "^mdio@[0-1]$": + type: object + + allOf: + - $ref: "http://devicetree.org/schemas/net/mdio.yaml#" + + properties: + compatible: + oneOf: + - enum: + - nxp,sja1110-base-t1-mdio + - nxp,sja1110-base-tx-mdio + + reg: + oneOf: + - enum: + - 0 + - 1 + + required: + - compatible + - reg + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@1 { + reg = <0x1>; + compatible = "nxp,sja1105t"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + phy-handle = <&rgmii_phy6>; + phy-mode = "rgmii-id"; + reg = <0>; + }; + + port@1 { + phy-handle = <&rgmii_phy3>; + phy-mode = "rgmii-id"; + reg = <1>; + }; + + port@2 { + phy-handle = <&rgmii_phy4>; + phy-mode = "rgmii-id"; + reg = <2>; + }; + + port@3 { + phy-mode = "rgmii-id"; + reg = <3>; + }; + + port@4 { + ethernet = <&enet2>; + phy-mode = "rgmii"; + reg = <4>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt index ccbc6d89325d..8c73f67c43ca 100644 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt @@ -3,6 +3,7 @@ Required properties: - compatible: should be one of: + "qca,qca8327" "qca,qca8334" "qca,qca8337" @@ -20,6 +21,10 @@ described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external mdio-bus each subnode describing a port needs to have a valid phandle referencing the internal PHY it is connected to. This is because there's no N:N mapping of port and PHY id. +To declare the internal mdio-bus configuration, declare a mdio node in the +switch node and declare the phandle for the port referencing the internal +PHY is connected to. In this config a internal mdio-bus is registered and +the mdio MASTER is used as communication. Don't use mixed external and internal mdio-bus configurations, as this is not supported by the hardware. @@ -149,26 +154,61 @@ for the internal master mdio-bus configuration: port@1 { reg = <1>; label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; }; port@2 { reg = <2>; label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; }; port@3 { reg = <3>; label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; }; port@4 { reg = <4>; label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; }; port@5 { reg = <5>; label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; }; }; }; diff --git a/Documentation/devicetree/bindings/net/dsa/sja1105.txt b/Documentation/devicetree/bindings/net/dsa/sja1105.txt deleted file mode 100644 index 13fd21074d48..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/sja1105.txt +++ /dev/null @@ -1,156 +0,0 @@ -NXP SJA1105 switch driver -========================= - -Required properties: - -- compatible: - Must be one of: - - "nxp,sja1105e" - - "nxp,sja1105t" - - "nxp,sja1105p" - - "nxp,sja1105q" - - "nxp,sja1105r" - - "nxp,sja1105s" - - Although the device ID could be detected at runtime, explicit bindings - are required in order to be able to statically check their validity. - For example, SGMII can only be specified on port 4 of R and S devices, - and the non-SGMII devices, while pin-compatible, are not equal in terms - of support for RGMII internal delays (supported on P/Q/R/S, but not on - E/T). - -Optional properties: - -- sja1105,role-mac: -- sja1105,role-phy: - Boolean properties that can be assigned under each port node. By - default (unless otherwise specified) a port is configured as MAC if it - is driving a PHY (phy-handle is present) or as PHY if it is PHY-less - (fixed-link specified, presumably because it is connected to a MAC). - The effect of this property (in either its implicit or explicit form) - is: - - In the case of MII or RMII it specifies whether the SJA1105 port is a - clock source or sink for this interface (not applicable for RGMII - where there is a Tx and an Rx clock). - - In the case of RGMII it affects the behavior regarding internal - delays: - 1. If sja1105,role-mac is specified, and the phy-mode property is one - of "rgmii-id", "rgmii-txid" or "rgmii-rxid", then the entity - designated to apply the delay/clock skew necessary for RGMII - is the PHY. The SJA1105 MAC does not apply any internal delays. - 2. If sja1105,role-phy is specified, and the phy-mode property is one - of the above, the designated entity to apply the internal delays - is the SJA1105 MAC (if hardware-supported). This is only supported - by the second-generation (P/Q/R/S) hardware. On a first-generation - E or T device, it is an error to specify an RGMII phy-mode other - than "rgmii" for a port that is in fixed-link mode. In that case, - the clock skew must either be added by the MAC at the other end of - the fixed-link, or by PCB serpentine traces on the board. - These properties are required, for example, in the case where SJA1105 - ports are at both ends of a MII/RMII PHY-less setup. One end would need - to have sja1105,role-mac, while the other sja1105,role-phy. - -See Documentation/devicetree/bindings/net/dsa/dsa.txt for the list of standard -DSA required and optional properties. - -Other observations ------------------- - -The SJA1105 SPI interface requires a CS-to-CLK time (t2 in UM10944) of at least -one half of t_CLK. At an SPI frequency of 1MHz, this means a minimum -cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed -depends on the SPI bus master driver. - -Example -------- - -Ethernet switch connected via SPI to the host, CPU port wired to enet2: - -arch/arm/boot/dts/ls1021a-tsn.dts: - -/* SPI controller of the LS1021 */ -&dspi0 { - sja1105@1 { - reg = <0x1>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "nxp,sja1105t"; - spi-max-frequency = <4000000>; - fsl,spi-cs-sck-delay = <1000>; - fsl,spi-sck-cs-delay = <1000>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - /* ETH5 written on chassis */ - label = "swp5"; - phy-handle = <&rgmii_phy6>; - phy-mode = "rgmii-id"; - reg = <0>; - /* Implicit "sja1105,role-mac;" */ - }; - port@1 { - /* ETH2 written on chassis */ - label = "swp2"; - phy-handle = <&rgmii_phy3>; - phy-mode = "rgmii-id"; - reg = <1>; - /* Implicit "sja1105,role-mac;" */ - }; - port@2 { - /* ETH3 written on chassis */ - label = "swp3"; - phy-handle = <&rgmii_phy4>; - phy-mode = "rgmii-id"; - reg = <2>; - /* Implicit "sja1105,role-mac;" */ - }; - port@3 { - /* ETH4 written on chassis */ - phy-handle = <&rgmii_phy5>; - label = "swp4"; - phy-mode = "rgmii-id"; - reg = <3>; - /* Implicit "sja1105,role-mac;" */ - }; - port@4 { - /* Internal port connected to eth2 */ - ethernet = <&enet2>; - phy-mode = "rgmii"; - reg = <4>; - /* Implicit "sja1105,role-phy;" */ - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; -}; - -/* MDIO controller of the LS1021 */ -&mdio0 { - /* BCM5464 */ - rgmii_phy3: ethernet-phy@3 { - reg = <0x3>; - }; - rgmii_phy4: ethernet-phy@4 { - reg = <0x4>; - }; - rgmii_phy5: ethernet-phy@5 { - reg = <0x5>; - }; - rgmii_phy6: ethernet-phy@6 { - reg = <0x6>; - }; -}; - -/* Ethernet master port of the LS1021 */ -&enet2 { - phy-connection-type = "rgmii"; - status = "ok"; - fixed-link { - speed = <1000>; - full-duplex; - }; -}; diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index e8f04687a3e0..b0933a8c295a 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -68,6 +68,7 @@ properties: - tbi - rev-mii - rmii + - rev-rmii # RX and TX delays are added by the MAC when required - rgmii @@ -97,6 +98,7 @@ properties: - 10gbase-kr - usxgmii - 10gbase-r + - 25gbase-r phy-mode: $ref: "#/properties/phy-connection-type" diff --git a/Documentation/devicetree/bindings/net/ingenic,mac.yaml b/Documentation/devicetree/bindings/net/ingenic,mac.yaml new file mode 100644 index 000000000000..d08a88125a5c --- /dev/null +++ b/Documentation/devicetree/bindings/net/ingenic,mac.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ingenic,mac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for MAC in Ingenic SoCs + +maintainers: + - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> + +description: + The Ethernet Media Access Controller in Ingenic SoCs. + +properties: + compatible: + enum: + - ingenic,jz4775-mac + - ingenic,x1000-mac + - ingenic,x1600-mac + - ingenic,x1830-mac + - ingenic,x2000-mac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + const: macirq + + clocks: + maxItems: 1 + + clock-names: + const: stmmaceth + + mode-reg: + description: An extra syscon register that control ethernet interface and timing delay + + rx-clk-delay-ps: + description: RGMII receive clock delay defined in pico seconds + + tx-clk-delay-ps: + description: RGMII transmit clock delay defined in pico seconds + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - mode-reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/x1000-cgu.h> + + mac: ethernet@134b0000 { + compatible = "ingenic,x1000-mac"; + reg = <0x134b0000 0x2000>; + + interrupt-parent = <&intc>; + interrupts = <55>; + interrupt-names = "macirq"; + + clocks = <&cgu X1000_CLK_MAC>; + clock-names = "stmmaceth"; + + mode-reg = <&mac_phy_ctrl>; + }; +... diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.txt b/Documentation/devicetree/bindings/net/mdio-gpio.txt deleted file mode 100644 index 4d91a36c5cf5..000000000000 --- a/Documentation/devicetree/bindings/net/mdio-gpio.txt +++ /dev/null @@ -1,27 +0,0 @@ -MDIO on GPIOs - -Currently defined compatibles: -- virtual,gpio-mdio -- microchip,mdio-smi0 - -MDC and MDIO lines connected to GPIO controllers are listed in the -gpios property as described in section VIII.1 in the following order: - -MDC, MDIO. - -Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases" -node. - -Example: - -aliases { - mdio-gpio0 = &mdio0; -}; - -mdio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qe_pio_a 11 - &qe_pio_c 6>; -}; diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.yaml b/Documentation/devicetree/bindings/net/mdio-gpio.yaml new file mode 100644 index 000000000000..1d83b8dcce2c --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-gpio.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mdio-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MDIO on GPIOs + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Heiner Kallweit <hkallweit1@gmail.com> + - Russell King <linux@armlinux.org.uk> + +allOf: + - $ref: "mdio.yaml#" + +properties: + compatible: + enum: + - virtual,mdio-gpio + - microchip,mdio-smi0 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + gpios: + minItems: 2 + items: + - description: MDC + - description: MDIO + - description: MDO + +#Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases" +#node. +additionalProperties: + type: object + +examples: + - | + aliases { + mdio-gpio0 = &mdio0; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qe_pio_a 11>, + <&qe_pio_c 6>; + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt deleted file mode 100644 index 694987d3c17a..000000000000 --- a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt +++ /dev/null @@ -1,119 +0,0 @@ -Properties for an MDIO bus multiplexer/switch controlled by GPIO pins. - -This is a special case of a MDIO bus multiplexer. One or more GPIO -lines are used to control which child bus is connected. - -Required properties in addition to the generic multiplexer properties: - -- compatible : mdio-mux-gpio. -- gpios : GPIO specifiers for each GPIO line. One or more must be specified. - - -Example : - - /* The parent MDIO bus. */ - smi1: mdio@1180000001900 { - compatible = "cavium,octeon-3860-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x11800 0x00001900 0x0 0x40>; - }; - - /* - An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a - pair of GPIO lines. Child busses 2 and 3 populated with 4 - PHYs each. - */ - mdio-mux { - compatible = "mdio-mux-gpio"; - gpios = <&gpio1 3 0>, <&gpio1 4 0>; - mdio-parent-bus = <&smi1>; - #address-cells = <1>; - #size-cells = <0>; - - mdio@2 { - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - - phy11: ethernet-phy@1 { - reg = <1>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <10 8>; /* Pin 10, active low */ - }; - phy12: ethernet-phy@2 { - reg = <2>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <10 8>; /* Pin 10, active low */ - }; - phy13: ethernet-phy@3 { - reg = <3>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <10 8>; /* Pin 10, active low */ - }; - phy14: ethernet-phy@4 { - reg = <4>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <10 8>; /* Pin 10, active low */ - }; - }; - - mdio@3 { - reg = <3>; - #address-cells = <1>; - #size-cells = <0>; - - phy21: ethernet-phy@1 { - reg = <1>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <12 8>; /* Pin 12, active low */ - }; - phy22: ethernet-phy@2 { - reg = <2>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <12 8>; /* Pin 12, active low */ - }; - phy23: ethernet-phy@3 { - reg = <3>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <12 8>; /* Pin 12, active low */ - }; - phy24: ethernet-phy@4 { - reg = <4>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <12 8>; /* Pin 12, active low */ - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml b/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml new file mode 100644 index 000000000000..71c25c4580ea --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mdio-mux-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Properties for an MDIO bus multiplexer/switch controlled by GPIO pins. + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + +description: + This is a special case of a MDIO bus multiplexer. One or more GPIO + lines are used to control which child bus is connected. + +allOf: + - $ref: /schemas/net/mdio-mux.yaml# + +properties: + compatible: + const: mdio-mux-gpio + + gpios: + description: + List of GPIOs used to control the multiplexer, least significant bit first. + minItems: 1 + maxItems: 32 + +required: + - compatible + - gpios + +unevaluatedProperties: false + +examples: + - | + /* + An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a + pair of GPIO lines. Child busses 2 and 3 populated with 4 + PHYs each. + */ + mdio-mux { + compatible = "mdio-mux-gpio"; + gpios = <&gpio1 3 0>, <&gpio1 4 0>; + mdio-parent-bus = <&smi1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <1>; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + ethernet-phy@2 { + reg = <2>; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + ethernet-phy@3 { + reg = <3>; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + ethernet-phy@4 { + reg = <4>; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + }; + + mdio@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <1>; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + ethernet-phy@2 { + reg = <2>; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + ethernet-phy@3 { + reg = <3>; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + ethernet-phy@4 { + reg = <4>; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt deleted file mode 100644 index 065e8bdb957d..000000000000 --- a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt +++ /dev/null @@ -1,75 +0,0 @@ -Properties for an MDIO bus multiplexer controlled by a memory-mapped device - -This is a special case of a MDIO bus multiplexer. A memory-mapped device, -like an FPGA, is used to control which child bus is connected. The mdio-mux -node must be a child of the memory-mapped device. The driver currently only -supports devices with 8, 16 or 32-bit registers. - -Required properties in addition to the generic multiplexer properties: - -- compatible : string, must contain "mdio-mux-mmioreg" - -- reg : integer, contains the offset of the register that controls the bus - multiplexer. The size field in the 'reg' property is the size of - register, and must therefore be 1, 2, or 4. - -- mux-mask : integer, contains an eight-bit mask that specifies which - bits in the register control the actual bus multiplexer. The - 'reg' property of each child mdio-mux node must be constrained by - this mask. - -Example: - -The FPGA node defines a memory-mapped FPGA with a register space of 0x30 bytes. -For the "EMI2" MDIO bus, register 9 (BRDCFG1) controls the mux on that bus. -A bitmask of 0x6 means that bits 1 and 2 (bit 0 is lsb) are the bits on -BRDCFG1 that control the actual mux. - - /* The FPGA node */ - fpga: board-control@3,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis"; - reg = <3 0 0x30>; - ranges = <0 3 0 0x30>; - - mdio-mux-emi2 { - compatible = "mdio-mux-mmioreg", "mdio-mux"; - mdio-parent-bus = <&xmdio0>; - #address-cells = <1>; - #size-cells = <0>; - reg = <9 1>; // BRDCFG1 - mux-mask = <0x6>; // EMI2 - - emi2_slot1: mdio@0 { // Slot 1 XAUI (FM2) - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - phy_xgmii_slot1: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <4>; - }; - }; - - emi2_slot2: mdio@2 { // Slot 2 XAUI (FM1) - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - - phy_xgmii_slot2: ethernet-phy@4 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - }; - }; - }; - }; - - /* The parent MDIO bus. */ - xmdio0: mdio@f1000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,fman-xmdio"; - reg = <0xf1000 0x1000>; - interrupts = <100 1 0 0>; - }; diff --git a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml new file mode 100644 index 000000000000..cf86bb0b0b62 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mdio-mux-mmioreg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Properties for an MDIO bus multiplexer controlled by a memory-mapped device + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + +description: |+ + This is a special case of a MDIO bus multiplexer. A memory-mapped device, + like an FPGA, is used to control which child bus is connected. The mdio-mux + node must be a child of the memory-mapped device. The driver currently only + supports devices with 8, 16 or 32-bit registers. + +allOf: + - $ref: /schemas/net/mdio-mux.yaml# + +properties: + compatible: + items: + - const: mdio-mux-mmioreg + - const: mdio-mux + + reg: + description: Contains the offset of the register that controls the bus + multiplexer. The size field in the 'reg' property is the size of register, + and must therefore be 1, 2, or 4. + maxItems: 1 + + mux-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Contains an eight-bit mask that specifies which bits in the + register control the actual bus multiplexer. The 'reg' property of each + child mdio-mux node must be constrained by this mask. + +required: + - compatible + - reg + - mux-mask + +unevaluatedProperties: false + +examples: + - | + mdio-mux@9 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&xmdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <9 1>; // BRDCFG1 + mux-mask = <0x6>; // EMI2 + + mdio@0 { // Slot 1 XAUI (FM2) + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + phy_xgmii_slot1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <4>; + }; + }; + + mdio@2 { // Slot 2 XAUI (FM1) + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <4>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.txt b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.txt deleted file mode 100644 index 534e38058fe0..000000000000 --- a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.txt +++ /dev/null @@ -1,82 +0,0 @@ -Properties for an MDIO bus multiplexer consumer device - -This is a special case of MDIO mux when MDIO mux is defined as a consumer -of a mux producer device. The mux producer can be of any type like mmio mux -producer, gpio mux producer or generic register based mux producer. - -Required properties in addition to the MDIO Bus multiplexer properties: - -- compatible : should be "mmio-mux-multiplexer" -- mux-controls : mux controller node to use for operating the mux -- mdio-parent-bus : phandle to the parent MDIO bus. - -each child node of mdio bus multiplexer consumer device represent a mdio -bus. - -for more information please refer -Documentation/devicetree/bindings/mux/mux-controller.txt -and Documentation/devicetree/bindings/net/mdio-mux.txt - -Example: -In below example the Mux producer and consumer are separate nodes. - -&i2c0 { - fpga@66 { // fpga connected to i2c - compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c", - "simple-mfd"; - reg = <0x66>; - - mux: mux-controller { // Mux Producer - compatible = "reg-mux"; - #mux-control-cells = <1>; - mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */ - <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */ - }; - }; -}; - -mdio-mux-1 { // Mux consumer - compatible = "mdio-mux-multiplexer"; - mux-controls = <&mux 0>; - mdio-parent-bus = <&emdio1>; - #address-cells = <1>; - #size-cells = <0>; - - mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - mdio@8 { - reg = <0x8>; - #address-cells = <1>; - #size-cells = <0>; - }; - - .. - .. -}; - -mdio-mux-2 { // Mux consumer - compatible = "mdio-mux-multiplexer"; - mux-controls = <&mux 1>; - mdio-parent-bus = <&emdio2>; - #address-cells = <1>; - #size-cells = <0>; - - mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - mdio@1 { - reg = <0x1>; - #address-cells = <1>; - #size-cells = <0>; - }; - - .. - .. -}; diff --git a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml new file mode 100644 index 000000000000..282987074ee4 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mdio-mux-multiplexer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Properties for an MDIO bus multiplexer consumer device + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + +description: |+ + This is a special case of MDIO mux when MDIO mux is defined as a consumer + of a mux producer device. The mux producer can be of any type like mmio mux + producer, gpio mux producer or generic register based mux producer. + + +allOf: + - $ref: /schemas/net/mdio-mux.yaml# + +properties: + compatible: + const: mdio-mux-multiplexer + + mux-controls: + maxItems: 1 + +required: + - compatible + - mux-controls + +unevaluatedProperties: false + +examples: + - | + mux: mux-controller { // Mux Producer + compatible = "reg-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */ + <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */ + }; + + mdio-mux-1 { // Mux consumer + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 0>; + mdio-parent-bus = <&emdio1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@8 { + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + mdio-mux-2 { // Mux consumer + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 1>; + mdio-parent-bus = <&emdio2>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/mdio-mux.txt b/Documentation/devicetree/bindings/net/mdio-mux.txt deleted file mode 100644 index f58571f36570..000000000000 --- a/Documentation/devicetree/bindings/net/mdio-mux.txt +++ /dev/null @@ -1,129 +0,0 @@ -Common MDIO bus multiplexer/switch properties. - -An MDIO bus multiplexer/switch will have several child busses that are -numbered uniquely in a device dependent manner. The nodes for an MDIO -bus multiplexer/switch will have one child node for each child bus. - -Required properties: -- #address-cells = <1>; -- #size-cells = <0>; - -Optional properties: -- mdio-parent-bus : phandle to the parent MDIO bus. - -- Other properties specific to the multiplexer/switch hardware. - -Required properties for child nodes: -- #address-cells = <1>; -- #size-cells = <0>; -- reg : The sub-bus number. - - -Example : - - /* The parent MDIO bus. */ - smi1: mdio@1180000001900 { - compatible = "cavium,octeon-3860-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x11800 0x00001900 0x0 0x40>; - }; - - /* - An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a - pair of GPIO lines. Child busses 2 and 3 populated with 4 - PHYs each. - */ - mdio-mux { - compatible = "mdio-mux-gpio"; - gpios = <&gpio1 3 0>, <&gpio1 4 0>; - mdio-parent-bus = <&smi1>; - #address-cells = <1>; - #size-cells = <0>; - - mdio@2 { - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - - phy11: ethernet-phy@1 { - reg = <1>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <10 8>; /* Pin 10, active low */ - }; - phy12: ethernet-phy@2 { - reg = <2>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <10 8>; /* Pin 10, active low */ - }; - phy13: ethernet-phy@3 { - reg = <3>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <10 8>; /* Pin 10, active low */ - }; - phy14: ethernet-phy@4 { - reg = <4>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <10 8>; /* Pin 10, active low */ - }; - }; - - mdio@3 { - reg = <3>; - #address-cells = <1>; - #size-cells = <0>; - - phy21: ethernet-phy@1 { - reg = <1>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <12 8>; /* Pin 12, active low */ - }; - phy22: ethernet-phy@2 { - reg = <2>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <12 8>; /* Pin 12, active low */ - }; - phy23: ethernet-phy@3 { - reg = <3>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <12 8>; /* Pin 12, active low */ - }; - phy24: ethernet-phy@4 { - reg = <4>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; - interrupt-parent = <&gpio>; - interrupts = <12 8>; /* Pin 12, active low */ - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/mdio-mux.yaml b/Documentation/devicetree/bindings/net/mdio-mux.yaml new file mode 100644 index 000000000000..d169adf5d9f4 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-mux.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mdio-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common MDIO bus multiplexer/switch properties. + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + +description: |+ + An MDIO bus multiplexer/switch will have several child busses that are + numbered uniquely in a device dependent manner. The nodes for an MDIO + bus multiplexer/switch will have one child node for each child bus. + +properties: + $nodename: + pattern: '^mdio-mux[\-@]?' + + mdio-parent-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the MDIO bus that this multiplexer's master-side port is + connected to. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^mdio@[0-9a-f]+$': + type: object + + properties: + reg: + maxItems: 1 + description: The sub-bus number. + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml new file mode 100644 index 000000000000..347b912a46bb --- /dev/null +++ b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml @@ -0,0 +1,226 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/microchip,sparx5-switch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Sparx5 Ethernet switch controller + +maintainers: + - Steen Hegelund <steen.hegelund@microchip.com> + - Lars Povlsen <lars.povlsen@microchip.com> + +description: | + The SparX-5 Enterprise Ethernet switch family provides a rich set of + Enterprise switching features such as advanced TCAM-based VLAN and + QoS processing enabling delivery of differentiated services, and + security through TCAM-based frame processing using versatile content + aware processor (VCAP). + + IPv4/IPv6 Layer 3 (L3) unicast and multicast routing is supported + with up to 18K IPv4/9K IPv6 unicast LPM entries and up to 9K IPv4/3K + IPv6 (S,G) multicast groups. + + L3 security features include source guard and reverse path + forwarding (uRPF) tasks. Additional L3 features include VRF-Lite and + IP tunnels (IP over GRE/IP). + + The SparX-5 switch family targets managed Layer 2 and Layer 3 + equipment in SMB, SME, and Enterprise where high port count + 1G/2.5G/5G/10G switching with 10G/25G aggregation links is required. + +properties: + $nodename: + pattern: "^switch@[0-9a-f]+$" + + compatible: + const: microchip,sparx5-switch + + reg: + items: + - description: cpu target + - description: devices target + - description: general control block target + + reg-names: + items: + - const: cpu + - const: devices + - const: gcb + + interrupts: + minItems: 1 + items: + - description: register based extraction + - description: frame dma based extraction + + interrupt-names: + minItems: 1 + items: + - const: xtr + - const: fdma + + resets: + items: + - description: Reset controller used for switch core reset (soft reset) + + reset-names: + items: + - const: switch + + mac-address: true + + ethernet-ports: + type: object + patternProperties: + "^port@[0-9a-f]+$": + type: object + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + reg: + description: Switch port number + + phys: + maxItems: 1 + description: + phandle of a Ethernet SerDes PHY. This defines which SerDes + instance will handle the Ethernet traffic. + + phy-mode: + description: + This specifies the interface used by the Ethernet SerDes towards + the PHY or SFP. + + microchip,bandwidth: + description: Specifies bandwidth in Mbit/s allocated to the port. + $ref: "/schemas/types.yaml#/definitions/uint32" + maximum: 25000 + + phy-handle: + description: + phandle of a Ethernet PHY. This is optional and if provided it + points to the cuPHY used by the Ethernet SerDes. + + sfp: + description: + phandle of an SFP. This is optional and used when not specifying + a cuPHY. It points to the SFP node that describes the SFP used by + the Ethernet SerDes. + + managed: true + + microchip,sd-sgpio: + description: + Index of the ports Signal Detect SGPIO in the set of 384 SGPIOs + This is optional, and only needed if the default used index is + is not correct. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 383 + + required: + - reg + - phys + - phy-mode + - microchip,bandwidth + + oneOf: + - required: + - phy-handle + - required: + - sfp + - managed + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - resets + - reset-names + - ethernet-ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + switch: switch@600000000 { + compatible = "microchip,sparx5-switch"; + reg = <0 0x401000>, + <0x10004000 0x7fc000>, + <0x11010000 0xaf0000>; + reg-names = "cpu", "devices", "gcb"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "xtr"; + resets = <&reset 0>; + reset-names = "switch"; + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + microchip,bandwidth = <1000>; + phys = <&serdes 13>; + phy-handle = <&phy0>; + phy-mode = "qsgmii"; + }; + /* ... */ + /* Then the 25G interfaces */ + port60: port@60 { + reg = <60>; + microchip,bandwidth = <25000>; + phys = <&serdes 29>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth60>; + managed = "in-band-status"; + microchip,sd-sgpio = <365>; + }; + port61: port@61 { + reg = <61>; + microchip,bandwidth = <25000>; + phys = <&serdes 30>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth61>; + managed = "in-band-status"; + microchip,sd-sgpio = <369>; + }; + port62: port@62 { + reg = <62>; + microchip,bandwidth = <25000>; + phys = <&serdes 31>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth62>; + managed = "in-band-status"; + microchip,sd-sgpio = <373>; + }; + port63: port@63 { + reg = <63>; + microchip,bandwidth = <25000>; + phys = <&serdes 32>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth63>; + managed = "in-band-status"; + microchip,sd-sgpio = <377>; + }; + /* Finally the Management interface */ + port64: port@64 { + reg = <64>; + microchip,bandwidth = <1000>; + phys = <&serdes 0>; + phy-handle = <&phy64>; + phy-mode = "sgmii"; + mac-address = [ 00 00 00 01 02 03 ]; + }; + }; + }; + +... +# vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml : diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml index 477066e2b821..081742c2b726 100644 --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml @@ -27,6 +27,9 @@ properties: reg: maxItems: 1 + clocks: + maxItems: 1 + wake-gpios: maxItems: 1 description: @@ -80,6 +83,8 @@ examples: en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>; wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; + + clocks = <&rpmcc 20>; }; }; # UART example on Raspberry Pi diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 7443490d4cc6..ed88ba4b94df 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -44,6 +44,7 @@ description: properties: compatible: enum: + - qcom,msm8998-ipa - qcom,sc7180-ipa - qcom,sc7280-ipa - qcom,sdm845-ipa @@ -105,7 +106,6 @@ properties: - description: Whether the IPA clock is enabled (if valid) qcom,smem-state-names: - $ref: /schemas/types.yaml#/definitions/string-array description: The names of the state bits used for SMP2P output items: - const: ipa-clock-enabled-valid diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt deleted file mode 100644 index 709ca6d51650..000000000000 --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt +++ /dev/null @@ -1,69 +0,0 @@ -Qualcomm Bluetooth Chips ---------------------- - -This documents the binding structure and common properties for serial -attached Qualcomm devices. - -Serial attached Qualcomm devices shall be a child node of the host UART -device the slave device is attached to. - -Required properties: - - compatible: should contain one of the following: - * "qcom,qca6174-bt" - * "qcom,qca9377-bt" - * "qcom,wcn3990-bt" - * "qcom,wcn3991-bt" - * "qcom,wcn3998-bt" - * "qcom,qca6390-bt" - -Optional properties for compatible string qcom,qca6174-bt: - - - enable-gpios: gpio specifier used to enable chip - - clocks: clock provided to the controller (SUSCLK_32KHZ) - - firmware-name: specify the name of nvm firmware to load - -Optional properties for compatible string qcom,qca9377-bt: - - - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml - -Required properties for compatible string qcom,wcn399x-bt: - - - vddio-supply: VDD_IO supply regulator handle. - - vddxo-supply: VDD_XO supply regulator handle. - - vddrf-supply: VDD_RF supply regulator handle. - - vddch0-supply: VDD_CH0 supply regulator handle. - -Optional properties for compatible string qcom,wcn399x-bt: - - - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml - - firmware-name: specify the name of nvm firmware to load - - clocks: clock provided to the controller - -Examples: - -serial@7570000 { - label = "BT-UART"; - status = "okay"; - - bluetooth { - compatible = "qcom,qca6174-bt"; - - enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; - clocks = <&divclk4>; - firmware-name = "nvm_00440302.bin"; - }; -}; - -serial@898000 { - bluetooth { - compatible = "qcom,wcn3990-bt"; - - vddio-supply = <&vreg_s4a_1p8>; - vddxo-supply = <&vreg_l7a_1p8>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l25a_3p3>; - max-speed = <3200000>; - firmware-name = "crnv21.bin"; - clocks = <&rpmhcc RPMH_RF_CLK2>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml new file mode 100644 index 000000000000..f93c6e7a1b59 --- /dev/null +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Bluetooth Chips + +maintainers: + - Balakrishna Godavarthi <bgodavar@codeaurora.org> + - Rocky Liao <rjliao@codeaurora.org> + +description: + This binding describes Qualcomm UART-attached bluetooth chips. + +properties: + compatible: + enum: + - qcom,qca6174-bt + - qcom,qca9377-bt + - qcom,wcn3990-bt + - qcom,wcn3991-bt + - qcom,wcn3998-bt + - qcom,qca6390-bt + - qcom,wcn6750-bt + + enable-gpios: + maxItems: 1 + description: gpio specifier used to enable chip + + swctrl-gpios: + maxItems: 1 + description: gpio specifier is used to find status + of clock supply to SoC + + clocks: + maxItems: 1 + description: clock provided to the controller (SUSCLK_32KHZ) + + vddio-supply: + description: VDD_IO supply regulator handle + + vddxo-supply: + description: VDD_XO supply regulator handle + + vddrf-supply: + description: VDD_RF supply regulator handle + + vddch0-supply: + description: VDD_CH0 supply regulator handle + + vddaon-supply: + description: VDD_AON supply regulator handle + + vddbtcxmx-supply: + description: VDD_BT_CXMX supply regulator handle + + vddrfacmn-supply: + description: VDD_RFA_CMN supply regulator handle + + vddrfa0p8-supply: + description: VDD_RFA_0P8 suppply regulator handle + + vddrfa1p7-supply: + description: VDD_RFA_1P7 supply regulator handle + + vddrfa1p2-supply: + description: VDD_RFA_1P2 supply regulator handle + + vddrfa2p2-supply: + description: VDD_RFA_2P2 supply regulator handle + + vddasd-supply: + description: VDD_ASD supply regulator handle + + max-speed: + description: see Documentation/devicetree/bindings/serial/serial.yaml + + firmware-name: + description: specify the name of nvm firmware to load + + local-bd-address: + description: see Documentation/devicetree/bindings/net/bluetooth.txt + + +required: + - compatible + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,qca6174-bt + then: + required: + - enable-gpios + - clocks + + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn3990-bt + - qcom,wcn3991-bt + - qcom,wcn3998-bt + then: + required: + - vddio-supply + - vddxo-supply + - vddrf-supply + - vddch0-supply + + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn6750-bt + then: + required: + - enable-gpios + - swctrl-gpios + - vddio-supply + - vddaon-supply + - vddbtcxmx-supply + - vddrfacmn-supply + - vddrfa0p8-supply + - vddrfa1p7-supply + - vddrfa1p2-supply + - vddasd-supply + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + serial { + + bluetooth { + compatible = "qcom,qca6174-bt"; + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + clocks = <&divclk4>; + firmware-name = "nvm_00440302.bin"; + }; + }; + - | + serial { + + bluetooth { + compatible = "qcom,wcn3990-bt"; + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + firmware-name = "crnv21.bin"; + }; + }; + - | + serial { + + bluetooth { + compatible = "qcom,wcn6750-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_default>; + enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; + vddio-supply = <&vreg_l19b_1p8>; + vddaon-supply = <&vreg_s7b_0p9>; + vddbtcxmx-supply = <&vreg_s7b_0p9>; + vddrfacmn-supply = <&vreg_s7b_0p9>; + vddrfa0p8-supply = <&vreg_s7b_0p9>; + vddrfa1p7-supply = <&vreg_s1b_1p8>; + vddrfa1p2-supply = <&vreg_s8b_1p2>; + vddrfa2p2-supply = <&vreg_s1c_2p2>; + vddasd-supply = <&vreg_l11c_2p8>; + max-speed = <3200000>; + firmware-name = "msnv11.bin"; + }; + }; diff --git a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml new file mode 100644 index 000000000000..bb94a2388520 --- /dev/null +++ b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0+ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek RTL82xx PHY + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Heiner Kallweit <hkallweit1@gmail.com> + +description: + Bindings for Realtek RTL82xx PHYs + +allOf: + - $ref: ethernet-phy.yaml# + +properties: + realtek,clkout-disable: + type: boolean + description: + Disable CLKOUT clock, CLKOUT clock default is enabled after hardware reset. + + + realtek,aldps-enable: + type: boolean + description: + Enable ALDPS mode, ALDPS mode default is disabled after hardware reset. + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + realtek,clkout-disable; + realtek,aldps-enable; + }; + }; diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml index 8ce5ed8a58dd..c101a1ec846e 100644 --- a/Documentation/devicetree/bindings/net/renesas,ether.yaml +++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml @@ -10,7 +10,7 @@ allOf: - $ref: ethernet-controller.yaml# maintainers: - - Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> + - Sergei Shtylyov <sergei.shtylyov@gmail.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml index 5acddb6171bf..083623c8d718 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -19,10 +19,12 @@ select: - rockchip,rk3128-gmac - rockchip,rk3228-gmac - rockchip,rk3288-gmac + - rockchip,rk3308-gmac - rockchip,rk3328-gmac - rockchip,rk3366-gmac - rockchip,rk3368-gmac - rockchip,rk3399-gmac + - rockchip,rk3568-gmac - rockchip,rv1108-gmac required: - compatible @@ -32,17 +34,23 @@ allOf: properties: compatible: - items: - - enum: - - rockchip,px30-gmac - - rockchip,rk3128-gmac - - rockchip,rk3228-gmac - - rockchip,rk3288-gmac - - rockchip,rk3328-gmac - - rockchip,rk3366-gmac - - rockchip,rk3368-gmac - - rockchip,rk3399-gmac - - rockchip,rv1108-gmac + oneOf: + - items: + - enum: + - rockchip,px30-gmac + - rockchip,rk3128-gmac + - rockchip,rk3228-gmac + - rockchip,rk3288-gmac + - rockchip,rk3308-gmac + - rockchip,rk3328-gmac + - rockchip,rk3366-gmac + - rockchip,rk3368-gmac + - rockchip,rk3399-gmac + - rockchip,rv1108-gmac + - items: + - enum: + - rockchip,rk3568-gmac + - const: snps,dwmac-4.20a clocks: minItems: 5 diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 2edd8bea993e..d7652596a09b 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -51,11 +51,20 @@ properties: - allwinner,sun8i-r40-emac - allwinner,sun8i-v3s-emac - allwinner,sun50i-a64-emac + - loongson,ls2k-dwmac + - loongson,ls7a-dwmac - amlogic,meson6-dwmac - amlogic,meson8b-dwmac - amlogic,meson8m2-dwmac - amlogic,meson-gxbb-dwmac - amlogic,meson-axg-dwmac + - loongson,ls2k-dwmac + - loongson,ls7a-dwmac + - ingenic,jz4775-mac + - ingenic,x1000-mac + - ingenic,x1600-mac + - ingenic,x1830-mac + - ingenic,x2000-mac - rockchip,px30-gmac - rockchip,rk3128-gmac - rockchip,rk3228-gmac @@ -82,7 +91,6 @@ properties: interrupts: minItems: 1 - maxItems: 3 items: - description: Combined signal for various interrupt events - description: The interrupt to manage the remote wake-up packet detection @@ -90,7 +98,6 @@ properties: interrupt-names: minItems: 1 - maxItems: 3 items: - const: macirq - const: eth_wake_irq @@ -310,6 +317,11 @@ allOf: - allwinner,sun8i-r40-emac - allwinner,sun8i-v3s-emac - allwinner,sun50i-a64-emac + - ingenic,jz4775-mac + - ingenic,x1000-mac + - ingenic,x1600-mac + - ingenic,x1830-mac + - ingenic,x2000-mac - snps,dwxgmac - snps,dwxgmac-2.10 - st,spear600-gmac @@ -353,6 +365,13 @@ allOf: - allwinner,sun8i-r40-emac - allwinner,sun8i-v3s-emac - allwinner,sun50i-a64-emac + - loongson,ls2k-dwmac + - loongson,ls7a-dwmac + - ingenic,jz4775-mac + - ingenic,x1000-mac + - ingenic,x1600-mac + - ingenic,x1830-mac + - ingenic,x2000-mac - snps,dwmac-4.00 - snps,dwmac-4.10a - snps,dwmac-4.20a diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index 27eb6066793f..19c7bd482a51 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -46,7 +46,6 @@ properties: clocks: minItems: 3 - maxItems: 5 items: - description: GMAC main clock - description: MAC TX clock diff --git a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt index d479ad977e24..b6791702bcfc 100644 --- a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt @@ -9,7 +9,6 @@ Required properties: "mediatek,mt8173-efuse" or "mediatek,efuse": for MT8173 "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192 "mediatek,mt8516-efuse", "mediatek,efuse": for MT8516 - "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192 - reg: Should contain registers location and length = Data cells = diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml index f90557f6deb8..b9589a0daa5c 100644 --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -25,14 +25,12 @@ properties: interrupts: minItems: 1 - maxItems: 2 items: - description: PCIe host controller - description: builtin MSI controller interrupt-names: minItems: 1 - maxItems: 2 items: - const: pcie - const: msi diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index de4b2baf91e8..d8971ab99274 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt @@ -38,6 +38,9 @@ Optional properties: The regulator will be enabled when initializing the PCIe host and disabled either as part of the init process or when shutting down the host. +- vph-supply: Should specify the regulator in charge of VPH one of the three + PCIe PHY powers. This regulator can be supplied by both 1.8v and 3.3v voltage + supplies. Additional required properties for imx6sx-pcie: - clock names: Must include the following additional entries: diff --git a/Documentation/devicetree/bindings/pci/loongson.yaml b/Documentation/devicetree/bindings/pci/loongson.yaml index 81bae060cbde..82bc6c486ca3 100644 --- a/Documentation/devicetree/bindings/pci/loongson.yaml +++ b/Documentation/devicetree/bindings/pci/loongson.yaml @@ -24,7 +24,6 @@ properties: reg: minItems: 1 - maxItems: 2 items: - description: CFG0 standard config space register - description: CFG1 extended config space register diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml index e7b1f9892da4..742206dbd965 100644 --- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml @@ -70,7 +70,6 @@ properties: reset-names: minItems: 1 - maxItems: 2 items: - const: phy - const: mac diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml index 04251d71f56b..fb95c276a986 100644 --- a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml @@ -26,14 +26,12 @@ properties: interrupts: minItems: 1 - maxItems: 2 items: - description: PCIe host controller - description: builtin MSI controller interrupt-names: minItems: 1 - maxItems: 2 items: - const: pcie - const: msi diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt deleted file mode 100644 index 47202a2938f2..000000000000 --- a/Documentation/devicetree/bindings/pci/pci-keystone.txt +++ /dev/null @@ -1,115 +0,0 @@ -TI Keystone PCIe interface - -Keystone PCI host Controller is based on the Synopsys DesignWare PCI -hardware version 3.65. It shares common functions with the PCIe DesignWare -core driver and inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pcie.txt - -Please refer to Documentation/devicetree/bindings/pci/designware-pcie.txt -for the details of DesignWare DT bindings. Additional properties are -described here as well as properties that are not applicable. - -Required Properties:- - -compatibility: Should be "ti,keystone-pcie" for RC on Keystone2 SoC - Should be "ti,am654-pcie-rc" for RC on AM654x SoC -reg: Three register ranges as listed in the reg-names property -reg-names: "dbics" for the DesignWare PCIe registers, "app" for the - TI specific application registers, "config" for the - configuration space address - -pcie_msi_intc : Interrupt controller device node for MSI IRQ chip - interrupt-cells: should be set to 1 - interrupts: GIC interrupt lines connected to PCI MSI interrupt lines - (required if the compatible is "ti,keystone-pcie") -msi-map: As specified in Documentation/devicetree/bindings/pci/pci-msi.txt - (required if the compatible is "ti,am654-pcie-rc". - -ti,syscon-pcie-id : phandle to the device control module required to set device - id and vendor id. -ti,syscon-pcie-mode : phandle to the device control module required to configure - PCI in either RC mode or EP mode. - - Example: - pcie_msi_intc: msi-interrupt-controller { - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>; - }; - -pcie_intc: Interrupt controller device node for Legacy IRQ chip - interrupt-cells: should be set to 1 - - Example: - pcie_intc: legacy-interrupt-controller { - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>; - }; - -Optional properties:- - phys: phandle to generic Keystone SerDes PHY for PCI - phy-names: name of the generic Keystone SerDes PHY for PCI - - If boot loader already does PCI link establishment, then phys and - phy-names shouldn't be present. - interrupts: platform interrupt for error interrupts. - -DesignWare DT Properties not applicable for Keystone PCI - -1. pcie_bus clock-names not used. Instead, a phandle to phys is used. - -AM654 PCIe Endpoint -=================== - -Required Properties:- - -compatibility: Should be "ti,am654-pcie-ep" for EP on AM654x SoC -reg: Four register ranges as listed in the reg-names property -reg-names: "dbics" for the DesignWare PCIe registers, "app" for the - TI specific application registers, "atu" for the - Address Translation Unit configuration registers and - "addr_space" used to map remote RC address space -num-ib-windows: As specified in - Documentation/devicetree/bindings/pci/designware-pcie.txt -num-ob-windows: As specified in - Documentation/devicetree/bindings/pci/designware-pcie.txt -num-lanes: As specified in - Documentation/devicetree/bindings/pci/designware-pcie.txt -power-domains: As documented by the generic PM domain bindings in - Documentation/devicetree/bindings/power/power_domain.txt. -ti,syscon-pcie-mode: phandle to the device control module required to configure - PCI in either RC mode or EP mode. - -Optional properties:- - -phys: list of PHY specifiers (used by generic PHY framework) -phy-names: must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the - number of lanes as specified in *num-lanes* property. -("phys" and "phy-names" DT bindings are specified in -Documentation/devicetree/bindings/phy/phy-bindings.txt) -interrupts: platform interrupt for error interrupts. - -pcie-ep { - compatible = "ti,am654-pcie-ep"; - reg = <0x5500000 0x1000>, <0x5501000 0x1000>, - <0x10000000 0x8000000>, <0x5506000 0x1000>; - reg-names = "app", "dbics", "addr_space", "atu"; - power-domains = <&k3_pds 120>; - ti,syscon-pcie-mode = <&pcie0_mode>; - num-lanes = <1>; - num-ib-windows = <16>; - num-ob-windows = <16>; - interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; -}; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt index 0da458a051b6..25f4def468bf 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt @@ -14,6 +14,7 @@ - "qcom,pcie-qcs404" for qcs404 - "qcom,pcie-sdm845" for sdm845 - "qcom,pcie-sm8250" for sm8250 + - "qcom,pcie-ipq6018" for ipq6018 - reg: Usage: required @@ -124,6 +125,16 @@ - "aux" Auxiliary clock - clock-names: + Usage: required for ipq6018 + Value type: <stringlist> + Definition: Should contain the following entries + - "iface" PCIe to SysNOC BIU clock + - "axi_m" AXI Master clock + - "axi_s" AXI Slave clock + - "axi_bridge" AXI bridge clock + - "rchng" + +- clock-names: Usage: required for qcs404 Value type: <stringlist> Definition: Should contain the following entries @@ -210,6 +221,19 @@ - "axi_m_sticky" AXI Master Sticky reset - reset-names: + Usage: required for ipq6018 + Value type: <stringlist> + Definition: Should contain the following entries + - "pipe" PIPE reset + - "sleep" Sleep reset + - "sticky" Core Sticky reset + - "axi_m" AXI Master reset + - "axi_s" AXI Slave reset + - "ahb" AHB Reset + - "axi_m_sticky" AXI Master Sticky reset + - "axi_s_sticky" AXI Slave Sticky reset + +- reset-names: Usage: required for qcs404 Value type: <stringlist> Definition: Should contain the following entries diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml new file mode 100644 index 000000000000..78c217d362a7 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/ti,am65-pci-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI AM65 PCI Endpoint + +maintainers: + - Kishon Vijay Abraham I <kishon@ti.com> + +allOf: + - $ref: pci-ep.yaml# + +properties: + compatible: + enum: + - ti,am654-pcie-ep + + reg: + maxItems: 4 + + reg-names: + items: + - const: app + - const: dbics + - const: addr_space + - const: atu + + power-domains: + maxItems: 1 + + ti,syscon-pcie-mode: + description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode. + $ref: /schemas/types.yaml#/definitions/phandle + + interrupts: + minItems: 1 + + dma-coherent: true + +required: + - compatible + - reg + - reg-names + - max-link-speed + - power-domains + - ti,syscon-pcie-mode + - dma-coherent + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + pcie0_ep: pcie-ep@5500000 { + compatible = "ti,am654-pcie-ep"; + reg = <0x5500000 0x1000>, + <0x5501000 0x1000>, + <0x10000000 0x8000000>, + <0x5506000 0x1000>; + reg-names = "app", "dbics", "addr_space", "atu"; + power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; + ti,syscon-pcie-mode = <&pcie0_mode>; + num-ib-windows = <16>; + num-ob-windows = <16>; + max-link-speed = <2>; + dma-coherent; + interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; + }; diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml new file mode 100644 index 000000000000..834dc1c1743c --- /dev/null +++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/ti,am65-pci-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI AM65 PCI Host + +maintainers: + - Kishon Vijay Abraham I <kishon@ti.com> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + enum: + - ti,am654-pcie-rc + - ti,keystone-pcie + + reg: + maxItems: 4 + + reg-names: + items: + - const: app + - const: dbics + - const: config + - const: atu + + power-domains: + maxItems: 1 + + ti,syscon-pcie-id: + description: Phandle to the SYSCON entry required for getting PCIe device/vendor ID + $ref: /schemas/types.yaml#/definitions/phandle + + ti,syscon-pcie-mode: + description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode. + $ref: /schemas/types.yaml#/definitions/phandle + + msi-map: true + + dma-coherent: true + +required: + - compatible + - reg + - reg-names + - max-link-speed + - ti,syscon-pcie-id + - ti,syscon-pcie-mode + - ranges + +if: + properties: + compatible: + enum: + - ti,am654-pcie-rc +then: + required: + - dma-coherent + - power-domains + - msi-map + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + pcie0_rc: pcie@5500000 { + compatible = "ti,am654-pcie-rc"; + reg = <0x5500000 0x1000>, + <0x5501000 0x1000>, + <0x10000000 0x2000>, + <0x5506000 0x1000>; + reg-names = "app", "dbics", "config", "atu"; + power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x10020000 0 0x00010000>, + <0x82000000 0 0x10030000 0x10030000 0 0x07FD0000>; + ti,syscon-pcie-id = <&pcie_devid>; + ti,syscon-pcie-mode = <&pcie0_mode>; + bus-range = <0x0 0xff>; + num-viewport = <16>; + max-link-speed = <2>; + dma-coherent; + interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; + msi-map = <0x0 &gic_its 0x0 0x10000>; + device_type = "pci"; + }; diff --git a/Documentation/devicetree/bindings/perf/arm,cmn.yaml b/Documentation/devicetree/bindings/perf/arm,cmn.yaml index e4fcc0de25e2..42424ccbdd0c 100644 --- a/Documentation/devicetree/bindings/perf/arm,cmn.yaml +++ b/Documentation/devicetree/bindings/perf/arm,cmn.yaml @@ -21,7 +21,6 @@ properties: interrupts: minItems: 1 - maxItems: 4 items: - description: Overflow interrupt for DTC0 - description: Overflow interrupt for DTC1 diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml index f80431060803..e288450e0844 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml @@ -15,7 +15,9 @@ properties: const: 1 compatible: - const: allwinner,sun8i-h3-usb-phy + enum: + - allwinner,sun8i-h3-usb-phy + - allwinner,sun50i-h616-usb-phy reg: items: diff --git a/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml index 9a2e779e6d38..0f0bcde9eb88 100644 --- a/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml +++ b/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml @@ -28,7 +28,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: usbh - const: usb_ref diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml index 5f9e91bfb5ff..43a4b880534c 100644 --- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml @@ -22,7 +22,6 @@ properties: reg: minItems: 1 - maxItems: 6 items: - description: the base CTRL register - description: XHCI EC register @@ -33,7 +32,6 @@ properties: reg-names: minItems: 1 - maxItems: 6 items: - const: ctrl - const: xhci_ec @@ -51,7 +49,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: sw_usb - const: sw_usb3 diff --git a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml index 04edda504ab6..cb1aa325336f 100644 --- a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml +++ b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml @@ -35,7 +35,6 @@ properties: reg-names: minItems: 1 - maxItems: 2 items: - const: phy - const: phy-ctrl diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml new file mode 100644 index 000000000000..ebd78acfe2de --- /dev/null +++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/hisilicon,hi3670-usb3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon Kirin970 USB PHY + +maintainers: + - Mauro Carvalho Chehab <mchehab+huawei@kernel.org> + +description: |+ + Bindings for USB3 PHY on HiSilicon Kirin 970. + +properties: + compatible: + const: hisilicon,hi3670-usb-phy + + "#phy-cells": + const: 0 + + hisilicon,pericrg-syscon: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: phandle of syscon used to control iso refclk. + + hisilicon,pctrl-syscon: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: phandle of syscon used to control usb tcxo. + + hisilicon,sctrl-syscon: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: phandle of syscon used to control phy deep sleep. + + hisilicon,eye-diagram-param: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Eye diagram for phy. + + hisilicon,tx-vboost-lvl: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TX level vboost for phy. + +required: + - compatible + - hisilicon,pericrg-syscon + - hisilicon,pctrl-syscon + - hisilicon,sctrl-syscon + - hisilicon,eye-diagram-param + - hisilicon,tx-vboost-lvl + - "#phy-cells" + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + usb3_otg_bc: usb3_otg_bc@ff200000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0xff200000 0x0 0x1000>; + + usb_phy { + compatible = "hisilicon,hi3670-usb-phy"; + #phy-cells = <0>; + hisilicon,pericrg-syscon = <&crg_ctrl>; + hisilicon,pctrl-syscon = <&pctrl>; + hisilicon,sctrl-syscon = <&sctrl>; + hisilicon,eye-diagram-param = <0xfdfee4>; + hisilicon,tx-vboost-lvl = <0x5>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml index 0ccaded3f245..29d4123323c2 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml @@ -16,6 +16,9 @@ properties: reg: maxItems: 1 + clocks: + maxItems: 1 + "#phy-cells": const: 1 description: selects if the phy is dual-ported @@ -23,6 +26,7 @@ properties: required: - compatible - reg + - clocks - "#phy-cells" additionalProperties: false @@ -32,5 +36,6 @@ examples: pcie0_phy: pcie-phy@1e149000 { compatible = "mediatek,mt7621-pci-phy"; reg = <0x1e149000 0x0700>; + clocks = <&sysc 0>; #phy-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml index b8a7651a3d9a..ef9d9d4e6875 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -131,7 +131,6 @@ patternProperties: clocks: minItems: 1 - maxItems: 2 items: - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz) - description: Reference clock of analog phy @@ -141,7 +140,6 @@ patternProperties: clock-names: minItems: 1 - maxItems: 2 items: - const: ref - const: da_ref diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml index 84383e2e0b34..e71b32c9c0d1 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml +++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml @@ -31,14 +31,12 @@ properties: resets: minItems: 1 - maxItems: 2 items: - description: Sierra PHY reset. - description: Sierra APB reset. This is optional. reset-names: minItems: 1 - maxItems: 2 items: - const: sierra_reset - const: sierra_apb diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml index 01dcd14e7b2a..bd9ae11c9994 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml @@ -52,28 +52,24 @@ properties: reg: minItems: 1 - maxItems: 2 items: - description: Offset of the Torrent PHY configuration registers. - description: Offset of the DPTX PHY configuration registers. reg-names: minItems: 1 - maxItems: 2 items: - const: torrent_phy - const: dptx_phy resets: minItems: 1 - maxItems: 2 items: - description: Torrent PHY reset. - description: Torrent APB reset. This is optional. reset-names: minItems: 1 - maxItems: 2 items: - const: torrent_reset - const: torrent_apb @@ -118,7 +114,7 @@ patternProperties: description: Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC, EXTERNAL_SSC or INTERNAL_SSC. - Refer include/dt-bindings/phy/phy-cadence-torrent.h for the constants to be used. + Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used. $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2] default: 0 diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml index fb29ad807b68..a5b027a6e70f 100644 --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml @@ -14,6 +14,7 @@ properties: enum: - rockchip,px30-usb2phy - rockchip,rk3228-usb2phy + - rockchip,rk3308-usb2phy - rockchip,rk3328-usb2phy - rockchip,rk3366-usb2phy - rockchip,rk3399-usb2phy diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml index 018cc1246ee1..3329f1d33a4f 100644 --- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml +++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml @@ -74,6 +74,13 @@ patternProperties: "#phy-cells": enum: [ 0x0, 0x1 ] + connector: + type: object + allOf: + - $ref: ../connector/usb-connector.yaml + properties: + vbus-supply: true + allOf: - if: properties: @@ -130,6 +137,10 @@ examples: reg = <0>; phy-supply = <&vdd_usb>; #phy-cells = <0>; + connector { + compatible = "usb-a-connector"; + vbus-supply = <&vbus_sw>; + }; }; usbphyc_port1: usb-phy@1 { diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml index 17f132ce5516..35296c588e78 100644 --- a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml @@ -30,7 +30,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: ref - const: xo diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml index 17fd7f6b83bb..6cf5c6c06072 100644 --- a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml @@ -30,7 +30,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: ref - const: xo diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml index 7808ec8bc712..f0497b8623ad 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml @@ -17,6 +17,7 @@ description: properties: compatible: enum: + - qcom,ipq6018-qmp-pcie-phy - qcom,ipq8074-qmp-pcie-phy - qcom,ipq8074-qmp-usb3-phy - qcom,msm8996-qmp-pcie-phy @@ -45,11 +46,11 @@ properties: - qcom,sm8350-qmp-ufs-phy - qcom,sm8350-qmp-usb3-phy - qcom,sm8350-qmp-usb3-uni-phy + - qcom,sdx55-qmp-pcie-phy - qcom,sdx55-qmp-usb3-uni-phy reg: minItems: 1 - maxItems: 2 items: - description: Address and length of PHY's common serdes block. - description: Address and length of PHY's DP_COM control block. @@ -301,8 +302,33 @@ allOf: compatible: contains: enum: + - qcom,ipq6018-qmp-pcie-phy + then: + properties: + clocks: + items: + - description: Phy aux clock. + - description: Phy config clock. + clock-names: + items: + - const: aux + - const: cfg_ahb + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + reset-names: + items: + - const: phy + - const: common + - if: + properties: + compatible: + contains: + enum: - qcom,sdm845-qhp-pcie-phy - qcom,sdm845-qmp-pcie-phy + - qcom,sdx55-qmp-pcie-phy - qcom,sm8250-qmp-gen3x1-pcie-phy - qcom,sm8250-qmp-gen3x2-pcie-phy - qcom,sm8250-qmp-modem-pcie-phy diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index 9f9cf07b7d45..ec9ccaaba098 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -23,6 +23,8 @@ properties: - qcom,msm8998-qusb2-phy - qcom,sdm660-qusb2-phy - qcom,ipq6018-qusb2-phy + - qcom,sm4250-qusb2-phy + - qcom,sm6115-qusb2-phy - items: - enum: - qcom,sc7180-qusb2-phy @@ -36,7 +38,6 @@ properties: clocks: minItems: 2 - maxItems: 3 items: - description: phy config clock - description: 19.2 MHz ref clk @@ -44,7 +45,6 @@ properties: clock-names: minItems: 2 - maxItems: 3 items: - const: cfg_ahb - const: ref diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-pcie.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-pcie.txt deleted file mode 100644 index 63853b35e083..000000000000 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-pcie.txt +++ /dev/null @@ -1,24 +0,0 @@ -* Renesas R-Car generation 3 PCIe PHY - -This file provides information on what the device node for the R-Car -generation 3 PCIe PHY contains. - -Required properties: -- compatible: "renesas,r8a77980-pcie-phy" if the device is a part of the - R8A77980 SoC. -- reg: offset and length of the register block. -- clocks: clock phandle and specifier pair. -- power-domains: power domain phandle and specifier pair. -- resets: reset phandle and specifier pair. -- #phy-cells: see phy-bindings.txt in the same directory, must be <0>. - -Example (R-Car V3H): - - pcie-phy@e65d0000 { - compatible = "renesas,r8a77980-pcie-phy"; - reg = <0 0xe65d0000 0 0x8000>; - #phy-cells = <0>; - clocks = <&cpg CPG_MOD 319>; - power-domains = <&sysc 32>; - resets = <&cpg 319>; - }; diff --git a/Documentation/devicetree/bindings/phy/renesas,rcar-gen3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,rcar-gen3-pcie-phy.yaml new file mode 100644 index 000000000000..247ef7c47cf5 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/renesas,rcar-gen3-pcie-phy.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/renesas,rcar-gen3-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Generation 3 PCIe PHY + +maintainers: + - Sergei Shtylyov <sergei.shtylyov@gmail.com> + +properties: + compatible: + const: renesas,r8a77980-pcie-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + '#phy-cells': + const: 0 + +required: + - compatible + - reg + - clocks + - power-domains + - resets + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a77980-cpg-mssr.h> + #include <dt-bindings/power/r8a77980-sysc.h> + + pcie-phy@e65d0000 { + compatible = "renesas,r8a77980-pcie-phy"; + reg = <0xe65d0000 0x8000>; + #phy-cells = <0>; + clocks = <&cpg CPG_MOD 319>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 319>; + }; diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml index 0f358d5b84ef..d5dc5a3cdceb 100644 --- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml @@ -39,7 +39,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: fck - const: usb_x1 @@ -61,7 +60,6 @@ properties: resets: minItems: 1 - maxItems: 2 items: - description: reset of USB 2.0 host side - description: reset of USB 2.0 peripheral side diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml index f3ef738a3ff6..b8483f9edbfc 100644 --- a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml +++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml @@ -33,7 +33,6 @@ properties: # If you want to use the ssc, the clock-frequency of usb_extal # must not be 0. minItems: 2 - maxItems: 3 items: - const: usb3-if # The funcional clock - const: usb3s_clk # The usb3's external clock diff --git a/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml new file mode 100644 index 000000000000..bb4a2e4b8ab0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/rockchip-inno-csi-dphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SoC MIPI RX0 D-PHY Device Tree Bindings + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +description: | + The Rockchip SoC has a MIPI CSI D-PHY based on an Innosilicon IP wich + connects to the ISP1 (Image Signal Processing unit v1.0) for CSI cameras. + +properties: + compatible: + enum: + - rockchip,px30-csi-dphy + - rockchip,rk1808-csi-dphy + - rockchip,rk3326-csi-dphy + - rockchip,rk3368-csi-dphy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: pclk + + '#phy-cells': + const: 0 + + power-domains: + description: Video in/out power domain. + maxItems: 1 + + resets: + items: + - description: exclusive PHY reset line + + reset-names: + items: + - const: apb + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Some additional phy settings are access through GRF regs. + +required: + - compatible + - reg + - clocks + - clock-names + - '#phy-cells' + - power-domains + - resets + - reset-names + - rockchip,grf + +additionalProperties: false + +examples: + - | + + csi_dphy: phy@ff2f0000 { + compatible = "rockchip,px30-csi-dphy"; + reg = <0xff2f0000 0x4000>; + clocks = <&cru 1>; + clock-names = "pclk"; + #phy-cells = <0>; + power-domains = <&power 1>; + resets = <&cru 1>; + reset-names = "apb"; + rockchip,grf = <&grf>; + }; diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt deleted file mode 100644 index 4ed569046daf..000000000000 --- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt +++ /dev/null @@ -1,52 +0,0 @@ -ROCKCHIP USB2 PHY - -Required properties: - - compatible: matching the soc type, one of - "rockchip,rk3066a-usb-phy" - "rockchip,rk3188-usb-phy" - "rockchip,rk3288-usb-phy" - - #address-cells: should be 1 - - #size-cells: should be 0 - -Deprecated properties: - - rockchip,grf : phandle to the syscon managing the "general - register files" - phy should be a child of the GRF instead - -Sub-nodes: -Each PHY should be represented as a sub-node. - -Sub-nodes -required properties: -- #phy-cells: should be 0 -- reg: PHY configure reg address offset in GRF - "0x320" - for PHY attach to OTG controller - "0x334" - for PHY attach to HOST0 controller - "0x348" - for PHY attach to HOST1 controller - -Optional Properties: -- clocks : phandle + clock specifier for the phy clocks -- clock-names: string, clock name, must be "phyclk" -- #clock-cells: for users of the phy-pll, should be 0 -- reset-names: Only allow the following entries: - - phy-reset -- resets: Must contain an entry for each entry in reset-names. -- vbus-supply: power-supply phandle for vbus power source - -Example: - -grf: syscon@ff770000 { - compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd"; - -... - - usbphy: phy { - compatible = "rockchip,rk3288-usb-phy"; - #address-cells = <1>; - #size-cells = <0>; - - usbphy0: usb-phy0 { - #phy-cells = <0>; - reg = <0x320>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml new file mode 100644 index 000000000000..f0fc8275dcd0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/rockchip-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip USB2.0 phy + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + oneOf: + - const: rockchip,rk3288-usb-phy + - items: + - enum: + - rockchip,rk3066a-usb-phy + - rockchip,rk3188-usb-phy + - const: rockchip,rk3288-usb-phy + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - compatible + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +patternProperties: + "usb-phy@[0-9a-f]+$": + type: object + + properties: + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-names: + const: phyclk + + "#clock-cells": + const: 0 + + resets: + maxItems: 1 + + reset-names: + const: phy-reset + + vbus-supply: + description: phandle for vbus power source + + required: + - reg + - "#phy-cells" + + additionalProperties: false + +examples: + - | + usbphy: usbphy { + compatible = "rockchip,rk3288-usb-phy"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usb-phy@320 { + reg = <0x320>; + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml new file mode 100644 index 000000000000..6107880e5246 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/ti,tcan104x-can.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: TCAN104x CAN TRANSCEIVER PHY + +maintainers: + - Aswath Govindraju <a-govindraju@ti.com> + +properties: + $nodename: + pattern: "^can-phy" + + compatible: + enum: + - ti,tcan1042 + - ti,tcan1043 + + '#phy-cells': + const: 0 + + standby-gpios: + description: + gpio node to toggle standby signal on transceiver + maxItems: 1 + + enable-gpios: + description: + gpio node to toggle enable signal on transceiver + maxItems: 1 + + max-bitrate: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + max bit rate supported in bps + minimum: 1 + +required: + - compatible + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + transceiver1: can-phy { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <5000000>; + standby-gpios = <&wakeup_gpio1 16 GPIO_ACTIVE_LOW>; + enable-gpios = <&main_gpio1 67 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml index ccdd9e3820d7..3f94f6944740 100644 --- a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml @@ -26,7 +26,6 @@ properties: - description: PAD Pull Control + PAD Schmitt Trigger Enable + PAD Control - description: PAD Drive Capacity Select minItems: 1 - maxItems: 4 clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml new file mode 100644 index 000000000000..d50571affd1f --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/apple,pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple GPIO controller + +maintainers: + - Mark Kettenis <kettenis@openbsd.org> + +description: | + The Apple GPIO controller is a simple combined pin and GPIO + controller present on Apple ARM SoC platforms, including various + iPhone and iPad devices and the "Apple Silicon" Macs. + +properties: + compatible: + items: + - const: apple,t8103-pinctrl + - const: apple,pinctrl + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-ranges: + maxItems: 1 + + interrupts: + description: One interrupt for each of the (up to 7) interrupt + groups supported by the controller sorted by interrupt group + number in ascending order. + minItems: 1 + maxItems: 7 + + interrupt-controller: true + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + + properties: + pinmux: + description: + Values are constructed from pin number and alternate function + configuration number using the APPLE_PINMUX() helper macro + defined in include/dt-bindings/pinctrl/apple.h. + + required: + - pinmux + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/apple-aic.h> + #include <dt-bindings/pinctrl/apple.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pinctrl: pinctrl@23c100000 { + compatible = "apple,t8103-pinctrl", "apple,pinctrl"; + reg = <0x2 0x3c100000 0x0 0x100000>; + clocks = <&gpio_clk>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 212>; + + interrupt-controller; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 16 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 17 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 18 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 19 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 20 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 21 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 22 IRQ_TYPE_LEVEL_HIGH>; + + pcie_pins: pcie-pins { + pinmux = <APPLE_PINMUX(150, 1)>, + <APPLE_PINMUX(151, 1)>, + <APPLE_PINMUX(32, 1)>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index ad91c0bc54da..ad2866c99738 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -46,8 +46,8 @@ patternProperties: PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, - SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, - SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, + SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, @@ -74,9 +74,9 @@ patternProperties: RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, - SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL, - SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, - SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, + SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2, + SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, + SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt deleted file mode 100644 index 8ab2d468dbdb..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt +++ /dev/null @@ -1,55 +0,0 @@ -Broadcom Northstar pins mux controller - -Some of Northstar SoCs's pins can be used for various purposes thanks to the mux -controller. This binding allows describing mux controller and listing available -functions. They can be referenced later by other bindings to let system -configure controller correctly. - -A list of pins varies across chipsets so few bindings are available. - -Node of the pinmux must be nested in the CRU (Central Resource Unit) "syscon" -noce. - -Required properties: -- compatible: must be one of: - "brcm,bcm4708-pinmux" - "brcm,bcm4709-pinmux" - "brcm,bcm53012-pinmux" -- offset: offset of pin registers in the CRU block - -Functions and their groups available for all chipsets: -- "spi": "spi_grp" -- "i2c": "i2c_grp" -- "pwm": "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp" -- "uart1": "uart1_grp" - -Additionally available on BCM4709 and BCM53012: -- "mdio": "mdio_grp" -- "uart2": "uart2_grp" -- "sdio": "sdio_pwr_grp", "sdio_1p8v_grp" - -For documentation of subnodes see: -Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - -Example: - dmu@1800c000 { - compatible = "simple-bus"; - ranges = <0 0x1800c000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - cru@100 { - compatible = "syscon", "simple-mfd"; - reg = <0x100 0x1a4>; - - pinctrl { - compatible = "brcm,bcm4708-pinmux"; - offset = <0xc0>; - - spi-pins { - function = "spi"; - groups = "spi_grp"; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml new file mode 100644 index 000000000000..470aff599c27 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,ns-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Northstar pins mux controller + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +description: + Some of Northstar SoCs's pins can be used for various purposes thanks to the + mux controller. This binding allows describing mux controller and listing + available functions. They can be referenced later by other bindings to let + system configure controller correctly. + + A list of pins varies across chipsets so few bindings are available. + + Node of the pinmux must be nested in the CRU (Central Resource Unit) "syscon" + node. + +properties: + compatible: + enum: + - brcm,bcm4708-pinmux + - brcm,bcm4709-pinmux + - brcm,bcm53012-pinmux + + offset: + description: offset of pin registers in the CRU block + maxItems: 1 + $ref: /schemas/types.yaml#/definitions/uint32-array + +patternProperties: + '-pins$': + type: object + description: pin node + $ref: pinmux-node.yaml# + + properties: + function: + enum: [ spi, i2c, pwm, uart1, mdio, uart2, sdio ] + groups: + minItems: 1 + maxItems: 4 + items: + enum: [ spi_grp, i2c_grp, pwm0_grp, pwm1_grp, pwm2_grp, pwm3_grp, + uart1_grp, mdio_grp, uart2_grp, sdio_pwr_grp, sdio_1p8v_grp ] + + required: + - function + - groups + + additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: brcm,bcm4708-pinmux + then: + patternProperties: + '-pins$': + properties: + function: + enum: [ spi, i2c, pwm, uart1 ] + groups: + items: + enum: [ spi_grp, i2c_grp, pwm0_grp, pwm1_grp, pwm2_grp, pwm3_grp, + uart1_grp ] + +required: + - offset + +additionalProperties: false + +examples: + - | + cru@1800c100 { + compatible = "syscon", "simple-mfd"; + reg = <0x1800c100 0x1a4>; + + pinctrl { + compatible = "brcm,bcm4708-pinmux"; + offset = <0xc0>; + + spi-pins { + function = "spi"; + groups = "spi_grp"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt index 6ec3c8d79f49..2fa5edac7a35 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt @@ -49,6 +49,7 @@ Optional properties: - interrupt-controller: Marks the device node as a interrupt controller. - drive-open-drain: Sets the ODR flag in the IOCON register. This configures the IRQ output as open drain active low. +- reset-gpios: Corresponds to the active-low RESET# pin for the chip Optional device specific properties: - microchip,irq-mirror: Sets the mirror flag in the IOCON register. Devices @@ -135,6 +136,7 @@ gpio21: gpio@21 { microchip,irq-mirror; pinctrl-names = "default"; pinctrl-0 = <&i2cgpio0irq>, <&gpio21pullups>; + reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; gpio21pullups: pinmux { pins = "gpio0", "gpio1", "gpio2", "gpio3", diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt index 360e59c9301a..5fe2c26c28bf 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt @@ -12,6 +12,7 @@ Required properties: "mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl. "mediatek,mt8167-pinctrl", compatible with mt8167 pinctrl. "mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl. + "mediatek,mt8365-pinctrl", compatible with mt8365 pinctrl. "mediatek,mt8516-pinctrl", compatible with mt8516 pinctrl. - pins-are-numbered: Specify the subnodes are using numbered pinmux to specify pins. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index f6a9760558a6..161216daf463 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -31,6 +31,7 @@ PMIC's from Qualcomm. "qcom,pm8350b-gpio" "qcom,pm8350c-gpio" "qcom,pmk8350-gpio" + "qcom,pm7325-gpio" "qcom,pmr735a-gpio" "qcom,pmr735b-gpio" "qcom,pm6150-gpio" @@ -120,6 +121,7 @@ to specify in a pin configuration subnode: gpio1-gpio8 for pm8350b gpio1-gpio9 for pm8350c gpio1-gpio4 for pmk8350 + gpio1-gpio10 for pm7325 gpio1-gpio4 for pmr735a gpio1-gpio4 for pmr735b gpio1-gpio10 for pm6150 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt index 0ba07bc96c55..5363d44cbb74 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt @@ -21,6 +21,7 @@ of PMIC's from Qualcomm. "qcom,pmi8950-mpp", "qcom,pm8994-mpp", "qcom,pma8084-mpp", + "qcom,pmi8994-mpp", And must contain either "qcom,spmi-mpp" or "qcom,ssbi-mpp" if the device is on an spmi bus or an ssbi bus respectively. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml new file mode 100644 index 000000000000..5f7adaa81f83 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# +title: Qualcomm Technologies, Inc. SM6125 TLMM block + +maintainers: + - Martin Botka <martin.botka@somainline.org> + +description: | + This binding describes the Top Level Mode Multiplexer (TLMM) block found + in the SM6125 platform. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm6125-tlmm + + reg: + minItems: 3 + maxItems: 3 + + reg-names: + items: + - const: "west" + - const: "south" + - const: "east" + + interrupts: true + interrupt-controller: true + '#interrupt-cells': true + gpio-controller: true + gpio-reserved-ranges: true + '#gpio-cells': true + gpio-ranges: true + wakeup-parent: true + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +patternProperties: + '-state$': + oneOf: + - $ref: "#/$defs/qcom-sm6125-tlmm-state" + - patternProperties: + ".*": + $ref: "#/$defs/qcom-sm6125-tlmm-state" + +$defs: + qcom-sm6125-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, + atest_char2, atest_char3, atest_tsens, atest_tsens2, atest_usb1, + atest_usb10, atest_usb11, atest_usb12, atest_usb13, atest_usb2, + atest_usb20, atest_usb21, atest_usb22, atest_usb23, aud_sb, + audio_ref, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1, + cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, cri_trng, + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, + ddr_pxi2, ddr_pxi3, debug_hot, dmic0_clk, dmic0_data, dmic1_clk, + dmic1_data, dp_hot, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, + gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en, + ldo_update, m_voc, mclk1, mclk2, mdp_vsync, mdp_vsync0, mdp_vsync1, + mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, mpm_pwr, mss_lte, + nav_pps, pa_indicator, phase_flag, pll_bist, pll_bypassnl, pll_reset, + pri_mi2s, pri_mi2s_ws, prng_rosc, qca_sb, qdss_cti, qdss, qlink_enable, + qlink_request, qua_mi2s, qui_mi2s, qup00, qup01, qup02, qup03, qup04, + qup10, qup11, qup12, qup13, qup14, sd_write, sec_mi2s, sp_cmu, swr_rx, + swr_tx, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm, + uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, + uim2_present, uim2_reset, unused1, unused2, usb_phy, vfr_1, vsense_trigger, + wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ] + + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@500000 { + compatible = "qcom,sm6125-tlmm"; + reg = <0x00500000 0x400000>, + <0x00900000 0x400000>, + <0x00d00000 0x400000>; + reg-names = "west", "south", "east"; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 134>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml index d30f85cc395e..f005abac7079 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml @@ -37,7 +37,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: vpu - const: vapb diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt deleted file mode 100644 index 49aba15dff8b..000000000000 --- a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt +++ /dev/null @@ -1,100 +0,0 @@ -DT bindings for the Renesas R-Mobile System Controller - -== System Controller Node == - -The R-Mobile System Controller provides the following functions: - - Boot mode management, - - Reset generation, - - Power management. - -Required properties: -- compatible: Should be "renesas,sysc-<soctype>", "renesas,sysc-rmobile" as - fallback. - Examples with soctypes are: - - "renesas,sysc-r8a73a4" (R-Mobile APE6) - - "renesas,sysc-r8a7740" (R-Mobile A1) - - "renesas,sysc-sh73a0" (SH-Mobile AG5) -- reg: Two address start and address range blocks for the device: - - The first block refers to the normally accessible registers, - - the second block refers to the registers protected by the HPB - semaphore. - -Optional nodes: -- pm-domains: This node contains a hierarchy of PM domain nodes, which should - match the Power Area Hierarchy in the Power Domain Specifications section of - the device's datasheet. - - -== PM Domain Nodes == - -Each of the PM domain nodes represents a PM domain, as documented by the -generic PM domain bindings in -Documentation/devicetree/bindings/power/power-domain.yaml. - -The nodes should be named by the real power area names, and thus their names -should be unique. - -Required properties: - - #power-domain-cells: Must be 0. - -Optional properties: -- reg: If the PM domain is not always-on, this property must contain the bit - index number for the corresponding power area in the various Power - Control and Status Registers. The parent's node must contain the - following two properties: - - #address-cells: Must be 1, - - #size-cells: Must be 0. - If the PM domain is always-on, this property must be omitted. - - -Example: - -This shows a subset of the r8a7740 PM domain hierarchy, containing the -C5 "always-on" domain, 2 of its subdomains (A4S and A4SU), and the A3SP domain, -which is a subdomain of A4S. - - sysc: system-controller@e6180000 { - compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile"; - reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>; - - pm-domains { - pd_c5: c5 { - #address-cells = <1>; - #size-cells = <0>; - #power-domain-cells = <0>; - - pd_a4s: a4s@10 { - reg = <10>; - #address-cells = <1>; - #size-cells = <0>; - #power-domain-cells = <0>; - - pd_a3sp: a3sp@11 { - reg = <11>; - #power-domain-cells = <0>; - }; - }; - - pd_a4su: a4su@20 { - reg = <20>; - #power-domain-cells = <0>; - }; - }; - }; - }; - - -== PM Domain Consumers == - -Hardware blocks belonging to a PM domain should contain a "power-domains" -property that is a phandle pointing to the corresponding PM domain node. - -Example: - - tpu: pwm@e6600000 { - compatible = "renesas,tpu-r8a7740", "renesas,tpu"; - reg = <0xe6600000 0x100>; - clocks = <&mstp3_clks R8A7740_CLK_TPU0>; - power-domains = <&pd_a3sp>; - #pwm-cells = <3>; - }; diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml new file mode 100644 index 000000000000..559718997de7 --- /dev/null +++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/renesas,sysc-rmobile.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Mobile System Controller + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + - Magnus Damm <magnus.damm@gmail.com> + +description: | + The R-Mobile System Controller provides the following functions: + - Boot mode management, + - Reset generation, + - Power management. + +properties: + compatible: + items: + - enum: + - renesas,sysc-r8a73a4 # R-Mobile APE6 + - renesas,sysc-r8a7740 # R-Mobile A1 + - renesas,sysc-sh73a0 # SH-Mobile AG5 + - const: renesas,sysc-rmobile # Generic SH/R-Mobile + + reg: + items: + - description: Normally accessible register block + - description: Register block protected by the HPB semaphore + + pm-domains: + type: object + description: | + This node contains a hierarchy of PM domain nodes, which should match the + Power Area Hierarchy in the Power Domain Specifications section of the + device's datasheet. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + additionalProperties: + $ref: "#/$defs/pd-node" + +required: + - compatible + - reg + - pm-domains + +additionalProperties: false + +$defs: + pd-node: + type: object + description: + PM domain node representing a PM domain. This node hould be named by + the real power area name, and thus its name should be unique. + + properties: + reg: + maxItems: 1 + description: + If the PM domain is not always-on, this property must contain the + bit index number for the corresponding power area in the various + Power Control and Status Registers. + If the PM domain is always-on, this property must be omitted. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#power-domain-cells': + const: 0 + + required: + - '#power-domain-cells' + + additionalProperties: + $ref: "#/$defs/pd-node" + +examples: + - | + // This shows a subset of the r8a7740 PM domain hierarchy, containing the + // C5 "always-on" domain, 2 of its subdomains (A4S and A4SU), and the A3SP + // domain, which is a subdomain of A4S. + sysc: system-controller@e6180000 { + compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile"; + reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>; + + pm-domains { + pd_c5: c5 { + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a4s: a4s@10 { + reg = <10>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3sp: a3sp@11 { + reg = <11>; + #power-domain-cells = <0>; + }; + }; + + pd_a4su: a4su@20 { + reg = <20>; + #power-domain-cells = <0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/charger-manager.txt b/Documentation/devicetree/bindings/power/supply/charger-manager.txt deleted file mode 100644 index b5ae9061b7a0..000000000000 --- a/Documentation/devicetree/bindings/power/supply/charger-manager.txt +++ /dev/null @@ -1,91 +0,0 @@ -charger-manager bindings -~~~~~~~~~~~~~~~~~~~~~~~~ - -Required properties : - - compatible : "charger-manager" - - <>-supply : for regulator consumer, named according to cm-regulator-name - - cm-chargers : name of chargers - - cm-fuel-gauge : name of battery fuel gauge - - subnode <regulator> : - - cm-regulator-name : name of charger regulator - - subnode <cable> : - - cm-cable-name : name of charger cable - one of USB, USB-HOST, - SDP, DCP, CDP, ACA, FAST-CHARGER, SLOW-CHARGER, WPT, - PD, DOCK, JIG, or MECHANICAL - - cm-cable-extcon : name of extcon dev -(optional) - cm-cable-min : minimum current of cable -(optional) - cm-cable-max : maximum current of cable - -Optional properties : - - cm-name : charger manager's name (default : "battery") - - cm-poll-mode : polling mode - 0 for disabled, 1 for always, 2 for when - external power is connected, or 3 for when charging. If not present, - then polling is disabled - - cm-poll-interval : polling interval (in ms) - - cm-battery-stat : battery status - 0 for battery always present, 1 for no - battery, 2 to check presence via fuel gauge, or 3 to check presence - via charger - - cm-fullbatt-vchkdrop-volt : voltage drop (in uV) before restarting charging - - cm-fullbatt-voltage : voltage (in uV) of full battery - - cm-fullbatt-soc : state of charge to consider as full battery - - cm-fullbatt-capacity : capcity (in uAh) to consider as full battery - - cm-thermal-zone : name of external thermometer's thermal zone - - cm-battery-* : threshold battery temperature for charging - -cold : critical cold temperature of battery for charging - -cold-in-minus : flag that cold temperature is in minus degrees - -hot : critical hot temperature of battery for charging - -temp-diff : temperature difference to allow recharging - - cm-dis/charging-max = limits of charging duration - -Deprecated properties: - - cm-num-chargers - - cm-fullbatt-vchkdrop-ms - -Example : - charger-manager@0 { - compatible = "charger-manager"; - chg-reg-supply = <&charger_regulator>; - - cm-name = "battery"; - /* Always polling ON : 30s */ - cm-poll-mode = <1>; - cm-poll-interval = <30000>; - - cm-fullbatt-vchkdrop-volt = <150000>; - cm-fullbatt-soc = <100>; - - cm-battery-stat = <3>; - - cm-chargers = "charger0", "charger1", "charger2"; - - cm-fuel-gauge = "fuelgauge0"; - - cm-thermal-zone = "thermal_zone.1" - /* in deci centigrade */ - cm-battery-cold = <50>; - cm-battery-cold-in-minus; - cm-battery-hot = <800>; - cm-battery-temp-diff = <100>; - - /* Allow charging for 5hr */ - cm-charging-max = <18000000>; - /* Allow discharging for 2hr */ - cm-discharging-max = <7200000>; - - regulator@0 { - cm-regulator-name = "chg-reg"; - cable@0 { - cm-cable-name = "USB"; - cm-cable-extcon = "extcon-dev.0"; - cm-cable-min = <475000>; - cm-cable-max = <500000>; - }; - cable@1 { - cm-cable-name = "SDP"; - cm-cable-extcon = "extcon-dev.0"; - cm-cable-min = <650000>; - cm-cable-max = <675000>; - }; - }; - - }; diff --git a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml new file mode 100644 index 000000000000..c863cfa67865 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml @@ -0,0 +1,215 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/charger-manager.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Charger Manager + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: | + Binding for the legacy charger manager driver. + Please do not use for new products. + +properties: + compatible: + const: charger-manager + + cm-chargers: + description: name of chargers + $ref: /schemas/types.yaml#/definitions/string-array + + cm-num-chargers: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + + cm-fuel-gauge: + description: name of battery fuel gauge + $ref: /schemas/types.yaml#/definitions/string + + cm-name: + description: name of the charger manager + default: battery + $ref: /schemas/types.yaml#/definitions/string + + cm-poll-mode: + description: polling mode + default: 0 + enum: + - 0 # disabled + - 1 # always + - 2 # when external power is connected + - 3 # when charging + + cm-poll-interval: + description: polling interval (in ms) + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-battery-stat: + description: battery status + enum: + - 0 # battery always present + - 1 # no battery + - 2 # check presence via fuel gauge + - 3 # check presence via charger + + cm-fullbatt-vchkdrop-volt: + description: voltage drop before restarting charging in uV + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-fullbatt-vchkdrop-ms: + deprecated: true + + cm-fullbatt-voltage: + description: voltage of full battery in uV + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-fullbatt-soc: + description: state of charge to consider as full battery in % + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-fullbatt-capacity: + description: capcity to consider as full battery in uAh + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-thermal-zone: + description: name of external thermometer's thermal zone + $ref: /schemas/types.yaml#/definitions/string + + cm-discharging-max: + description: limits of discharging duration in ms + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-charging-max: + description: limits of charging duration in ms + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-battery-cold: + description: critical cold temperature of battery for charging in deci-degree celsius + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-battery-cold-in-minus: + description: if set cm-battery-cold temperature is in minus degrees + type: boolean + + cm-battery-hot: + description: critical hot temperature of battery for charging in deci-degree celsius + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-battery-temp-diff: + description: temperature difference to allow recharging in deci-degree celsius + $ref: /schemas/types.yaml#/definitions/uint32 + +patternProperties: + "-supply$": + description: regulator consumer, named according to cm-regulator-name + $ref: /schemas/types.yaml#/definitions/phandle + + "^regulator[@-][0-9]$": + type: object + properties: + cm-regulator-name: + description: name of charger regulator + $ref: /schemas/types.yaml#/definitions/string + + required: + - cm-regulator-name + + additionalProperties: false + + patternProperties: + "^cable[@-][0-9]$": + type: object + properties: + cm-cable-name: + description: name of charger cable + enum: + - USB + - USB-HOST + - SDP + - DCP + - CDP + - ACA + - FAST-CHARGER + - SLOW-CHARGER + - WPT + - PD + - DOCK + - JIG + - MECHANICAL + + cm-cable-extcon: + description: name of extcon dev + $ref: /schemas/types.yaml#/definitions/string + + cm-cable-min: + description: minimum current of cable in uA + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-cable-max: + description: maximum current of cable in uA + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - cm-cable-name + - cm-cable-extcon + + additionalProperties: false + +required: + - compatible + - cm-chargers + - cm-fuel-gauge + +additionalProperties: false + +examples: + - | + charger-manager { + compatible = "charger-manager"; + chg-reg-supply = <&charger_regulator>; + + cm-name = "battery"; + /* Always polling ON : 30s */ + cm-poll-mode = <1>; + cm-poll-interval = <30000>; + + cm-fullbatt-vchkdrop-volt = <150000>; + cm-fullbatt-soc = <100>; + + cm-battery-stat = <3>; + + cm-chargers = "charger0", "charger1", "charger2"; + + cm-fuel-gauge = "fuelgauge0"; + + cm-thermal-zone = "thermal_zone.1"; + /* in deci centigrade */ + cm-battery-cold = <50>; + cm-battery-cold-in-minus; + cm-battery-hot = <800>; + cm-battery-temp-diff = <100>; + + /* Allow charging for 5hr */ + cm-charging-max = <18000000>; + /* Allow discharging for 2hr */ + cm-discharging-max = <7200000>; + + regulator-0 { + cm-regulator-name = "chg-reg"; + cable-0 { + cm-cable-name = "USB"; + cm-cable-extcon = "extcon-dev.0"; + cm-cable-min = <475000>; + cm-cable-max = <500000>; + }; + cable-1 { + cm-cable-name = "SDP"; + cm-cable-extcon = "extcon-dev.0"; + cm-cable-min = <650000>; + cm-cable-max = <675000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml index de91cf3f058c..f792d06db413 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml @@ -89,7 +89,7 @@ examples: reg = <0x36>; maxim,alert-low-soc-level = <10>; interrupt-parent = <&gpio7>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; wakeup-source; }; }; diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml new file mode 100644 index 000000000000..ae647d3355a2 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/richtek,rt5033-battery.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Richtek RT5033 PMIC Fuel Gauge + +maintainers: + - Stephan Gerhold <stephan@gerhold.net> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: richtek,rt5033-battery + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + battery@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + battery@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + interrupt-parent = <&msmgpio>; + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml index db1aa238cda5..b62c2431f94e 100644 --- a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml @@ -20,7 +20,7 @@ properties: maxItems: 1 phys: - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 description: phandle to the USB phy monitored-battery: diff --git a/Documentation/devicetree/bindings/property-units.txt b/Documentation/devicetree/bindings/property-units.txt deleted file mode 100644 index 218f99fa311f..000000000000 --- a/Documentation/devicetree/bindings/property-units.txt +++ /dev/null @@ -1,48 +0,0 @@ -Standard Unit Suffixes for Property names - -Properties which have a unit of measure are recommended to have a unit -suffix appended to the property name. The list below contains the -recommended suffixes. Other variations exist in bindings, but should not -be used in new bindings or added here. The inconsistency in the unit -prefixes is due to selecting the most commonly used variants. - -It is also recommended to use the units listed here and not add additional -unit prefixes. - -Time/Frequency ----------------------------------------- --mhz : megahertz --hz : hertz (preferred) --sec : second --ms : millisecond --us : microsecond --ns : nanosecond --ps : picosecond - -Distance ----------------------------------------- --mm : millimeter - -Electricity ----------------------------------------- --microamp : microampere --microamp-hours : microampere hour --ohms : ohm --micro-ohms : microohm --microwatt-hours: microwatt hour --microvolt : microvolt --picofarads : picofarad --femtofarads : femtofarad - -Temperature ----------------------------------------- --celsius : degree Celsius --millicelsius : millidegree Celsius - -Pressure ----------------------------------------- --kpascal : kilopascal - -Throughput ----------------------------------------- --kBps : kilobytes per second diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml index 7dcab2bf8128..54a7700df08f 100644 --- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml @@ -37,7 +37,6 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: Module Clock - description: Bus Clock diff --git a/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt b/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt deleted file mode 100644 index 655f6cd4ef46..000000000000 --- a/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt +++ /dev/null @@ -1,21 +0,0 @@ -Broadcom iProc PWM controller device tree bindings - -This controller has 4 channels. - -Required Properties : -- compatible: must be "brcm,iproc-pwm" -- reg: physical base address and length of the controller's registers -- clocks: phandle + clock specifier pair for the external clock -- #pwm-cells: Should be 3. See pwm.yaml in this directory for a - description of the cells format. - -Refer to clocks/clock-bindings.txt for generic clock consumer properties. - -Example: - -pwm: pwm@18031000 { - compatible = "brcm,iproc-pwm"; - reg = <0x18031000 0x28>; - clocks = <&osc>; - #pwm-cells = <3>; -}; diff --git a/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.yaml b/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.yaml new file mode 100644 index 000000000000..218ab06c34d1 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/brcm,iproc-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom iProc PWM controller + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +description: + This controller has 4 channels. + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: brcm,iproc-pwm + + reg: + maxItems: 1 + + clocks: + description: external clock + maxItems: 1 + + "#pwm-cells": + const: 3 + +unevaluatedProperties: false + +required: + - reg + - clocks + +examples: + - | + pwm@18031000 { + compatible = "brcm,iproc-pwm"; + reg = <0x18031000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml index 7d1f687cee9c..2effe6c0de6b 100644 --- a/Documentation/devicetree/bindings/pwm/pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm.yaml @@ -24,8 +24,9 @@ additionalProperties: true examples: - | - pwm: pwm@7000a000 { - compatible = "nvidia,tegra20-pwm"; - reg = <0x7000a000 0x100>; - #pwm-cells = <2>; + pwm: pwm@1c20e00 { + compatible = "allwinner,sun7i-a20-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; }; diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml index 3c2fa2e93d1b..7ea1070b4b3a 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml +++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml @@ -61,6 +61,19 @@ required: - reg - '#pwm-cells' - clocks + - power-domains + +if: + not: + properties: + compatible: + contains: + enum: + - renesas,pwm-r8a7778 + - renesas,pwm-r8a7779 +then: + required: + - resets additionalProperties: false diff --git a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml index aa9a4570c906..81ccb2110162 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml @@ -9,6 +9,15 @@ title: Renesas R-Car Timer Pulse Unit PWM Controller maintainers: - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> +select: + properties: + compatible: + contains: + const: renesas,tpu + required: + - compatible + - '#pwm-cells' + properties: compatible: items: @@ -58,6 +67,23 @@ required: - compatible - reg - '#pwm-cells' + - clocks + - power-domains + +allOf: + - $ref: pwm.yaml# + + - if: + not: + properties: + compatible: + contains: + enum: + - renesas,tpu-r8a73a4 + - renesas,tpu-r8a7740 + then: + required: + - resets additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/max8893.yaml b/Documentation/devicetree/bindings/regulator/max8893.yaml new file mode 100644 index 000000000000..2b5e977bf409 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8893.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/max8893.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Regulator driver for MAX8893 PMIC from Maxim Integrated. + +maintainers: + - Sergey Larin <cerg2010cerg2010@mail.ru> + +description: | + The device has 5 LDO regulators and a single BUCK regulator. + Programming is done through I2C bus. + +properties: + compatible: + const: maxim,max8893 + + reg: + maxItems: 1 + + regulators: + type: object + + patternProperties: + "^(ldo[1-5]|buck)$": + $ref: "regulator.yaml#" + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - regulators + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@3e { + compatible = "maxim,max8893"; + reg = <0x3e>; + + regulators { + /* Front camera - s5k6aafx, back - m5mo */ + /* Numbers used to indicate the sequence */ + front_1_back_1: buck { + regulator-name = "cam_isp_core_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + front_4_back_5: ldo1 { + regulator-name = "vt_io_1v8,cam_isp_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + front_3_back_4: ldo2 { + regulator-name = "vt_core_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + front_5_back_6: ldo3 { + regulator-name = "vt_cam_1v8,vt_sensor_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo4 { + /* not used */ + }; + + back_7: ldo5 { + regulator-name = "cam_sensor_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml new file mode 100644 index 000000000000..8cc413eb482d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml @@ -0,0 +1,385 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mt6359-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MT6359 Regulator from MediaTek Integrated + +maintainers: + - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> + +description: | + List of regulators provided by this controller. It is named + according to its regulator type, buck_<name> and ldo_<name>. + MT6359 regulators node should be sub node of the MT6397 MFD node. + +patternProperties: + "^buck_v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$" + + unevaluatedProperties: false + + "^ldo_v(ibr|rf12|usb|camio|efuse|xo22)$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^v(ibr|rf12|usb|camio|efuse|xo22)$" + + unevaluatedProperties: false + + "^ldo_v(rfck|emc|a12|a09|ufs|bbck)$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^v(rfck|emc|a12|a09|ufs|bbck)$" + + unevaluatedProperties: false + + "^ldo_vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$" + + unevaluatedProperties: false + + "^ldo_vsram_(proc2|others|md|proc1|others_sshub)$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^vsram_(proc2|others|md|proc1|others_sshub)$" + + unevaluatedProperties: false + + "^ldo_v(fe|bif|io)28$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^v(fe|bif|io)28$" + + unevaluatedProperties: false + + "^ldo_v(aud|io|aux|rf|m)18$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^v(aud|io|aux|rf|m)18$" + + unevaluatedProperties: false + + "^ldo_vsim[12]$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^vsim[12]$" + + required: + - regulator-name + + unevaluatedProperties: false + +additionalProperties: false + +examples: + - | + pmic { + regulators { + mt6359_vs1_buck_reg: buck_vs1 { + regulator-name = "vs1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2200000>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + mt6359_vgpu11_buck_reg: buck_vgpu11 { + regulator-name = "vgpu11"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vmodem_buck_reg: buck_vmodem { + regulator-name = "vmodem"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1100000>; + regulator-ramp-delay = <10760>; + regulator-enable-ramp-delay = <200>; + }; + mt6359_vpu_buck_reg: buck_vpu { + regulator-name = "vpu"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vcore_buck_reg: buck_vcore { + regulator-name = "vcore"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vs2_buck_reg: buck_vs2 { + regulator-name = "vs2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1600000>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + mt6359_vpa_buck_reg: buck_vpa { + regulator-name = "vpa"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3650000>; + regulator-enable-ramp-delay = <300>; + }; + mt6359_vproc2_buck_reg: buck_vproc2 { + regulator-name = "vproc2"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vproc1_buck_reg: buck_vproc1 { + regulator-name = "vproc1"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vcore_sshub_buck_reg: buck_vcore_sshub { + regulator-name = "vcore_sshub"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + }; + mt6359_vgpu11_sshub_buck_reg: buck_vgpu11_sshub { + regulator-name = "vgpu11_sshub"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + }; + mt6359_vaud18_ldo_reg: ldo_vaud18 { + regulator-name = "vaud18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vsim1_ldo_reg: ldo_vsim1 { + regulator-name = "vsim1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + }; + mt6359_vibr_ldo_reg: ldo_vibr { + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + mt6359_vrf12_ldo_reg: ldo_vrf12 { + regulator-name = "vrf12"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + }; + mt6359_vusb_ldo_reg: ldo_vusb { + regulator-name = "vusb"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <960>; + regulator-always-on; + }; + mt6359_vsram_proc2_ldo_reg: ldo_vsram_proc2 { + regulator-name = "vsram_proc2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + mt6359_vio18_ldo_reg: ldo_vio18 { + regulator-name = "vio18"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-enable-ramp-delay = <960>; + regulator-always-on; + }; + mt6359_vcamio_ldo_reg: ldo_vcamio { + regulator-name = "vcamio"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + mt6359_vcn18_ldo_reg: ldo_vcn18 { + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vfe28_ldo_reg: ldo_vfe28 { + regulator-name = "vfe28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <120>; + }; + mt6359_vcn13_ldo_reg: ldo_vcn13 { + regulator-name = "vcn13"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1300000>; + }; + mt6359_vcn33_1_bt_ldo_reg: ldo_vcn33_1_bt { + regulator-name = "vcn33_1_bt"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_vcn33_1_wifi_ldo_reg: ldo_vcn33_1_wifi { + regulator-name = "vcn33_1_wifi"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_vaux18_ldo_reg: ldo_vaux18 { + regulator-name = "vaux18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + mt6359_vsram_others_ldo_reg: ldo_vsram_others { + regulator-name = "vsram_others"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vefuse_ldo_reg: ldo_vefuse { + regulator-name = "vefuse"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2000000>; + }; + mt6359_vxo22_ldo_reg: ldo_vxo22 { + regulator-name = "vxo22"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + }; + mt6359_vrfck_ldo_reg: ldo_vrfck { + regulator-name = "vrfck"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1700000>; + }; + mt6359_vrfck_1_ldo_reg: ldo_vrfck_1 { + regulator-name = "vrfck"; + regulator-min-microvolt = <1240000>; + regulator-max-microvolt = <1600000>; + }; + mt6359_vbif28_ldo_reg: ldo_vbif28 { + regulator-name = "vbif28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vio28_ldo_reg: ldo_vio28 { + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + mt6359_vemc_ldo_reg: ldo_vemc { + regulator-name = "vemc"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + }; + mt6359_vemc_1_ldo_reg: ldo_vemc_1 { + regulator-name = "vemc"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + mt6359_vcn33_2_bt_ldo_reg: ldo_vcn33_2_bt { + regulator-name = "vcn33_2_bt"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_vcn33_2_wifi_ldo_reg: ldo_vcn33_2_wifi { + regulator-name = "vcn33_2_wifi"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_va12_ldo_reg: ldo_va12 { + regulator-name = "va12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + mt6359_va09_ldo_reg: ldo_va09 { + regulator-name = "va09"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + }; + mt6359_vrf18_ldo_reg: ldo_vrf18 { + regulator-name = "vrf18"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1810000>; + }; + mt6359_vsram_md_ldo_reg: ldo_vsram_md { + regulator-name = "vsram_md"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <10760>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vufs_ldo_reg: ldo_vufs { + regulator-name = "vufs"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + mt6359_vm18_ldo_reg: ldo_vm18 { + regulator-name = "vm18"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-always-on; + }; + mt6359_vbbck_ldo_reg: ldo_vbbck { + regulator-name = "vbbck"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1200000>; + }; + mt6359_vsram_proc1_ldo_reg: ldo_vsram_proc1 { + regulator-name = "vsram_proc1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + mt6359_vsim2_ldo_reg: ldo_vsim2 { + regulator-name = "vsim2"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + }; + mt6359_vsram_others_sshub_ldo: ldo_vsram_others_sshub { + regulator-name = "vsram_others_sshub"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml index e561a5b941e4..34de38377aa6 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -33,6 +33,9 @@ description: | The names used for regulator nodes must match those supported by a given PMIC. Supported regulator node names are + For PM6150, smps1 - smps5, ldo1 - ldo19 + For PM6150L, smps1 - smps8, ldo1 - ldo11, bob + For PM7325, smps1 - smps8, ldo1 - ldo19 For PM8005, smps1 - smps4 For PM8009, smps1 - smps2, ldo1 - ldo7 For PM8150, smps1 - smps10, ldo1 - ldo18 @@ -41,15 +44,15 @@ description: | For PM8350C, smps1 - smps10, ldo1 - ldo13, bob For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 For PMI8998, bob - For PM6150, smps1 - smps5, ldo1 - ldo19 - For PM6150L, smps1 - smps8, ldo1 - ldo11, bob - For PMX55, smps1 - smps7, ldo1 - ldo16 - For PM7325, smps1 - smps8, ldo1 - ldo19 For PMR735A, smps1 - smps3, ldo1 - ldo7 + For PMX55, smps1 - smps7, ldo1 - ldo16 properties: compatible: enum: + - qcom,pm6150-rpmh-regulators + - qcom,pm6150l-rpmh-regulators + - qcom,pm7325-rpmh-regulators - qcom,pm8005-rpmh-regulators - qcom,pm8009-rpmh-regulators - qcom,pm8009-1-rpmh-regulators @@ -59,11 +62,9 @@ properties: - qcom,pm8350c-rpmh-regulators - qcom,pm8998-rpmh-regulators - qcom,pmi8998-rpmh-regulators - - qcom,pm6150-rpmh-regulators - - qcom,pm6150l-rpmh-regulators - - qcom,pmx55-rpmh-regulators - - qcom,pm7325-rpmh-regulators + - qcom,pmm8155au-rpmh-regulators - qcom,pmr735a-rpmh-regulators + - qcom,pmx55-rpmh-regulators qcom,pmic-id: description: | diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml index a35c6cb9bf97..83b53579f463 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -24,6 +24,10 @@ description: For mp5496, s2 + For pm8226, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, + l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, + l26, l27, l28, lvs1 + For pm8841, s1, s2, s3, s4, s5, s6, s7, s8 For pm8916, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, @@ -68,6 +72,7 @@ properties: compatible: enum: - qcom,rpm-mp5496-regulators + - qcom,rpm-pm8226-regulators - qcom,rpm-pm8841-regulators - qcom,rpm-pm8916-regulators - qcom,rpm-pm8941-regulators diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index 6d0bc9cd4040..a6ae9ecae5cc 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -117,6 +117,88 @@ properties: description: Enable over current protection. type: boolean + regulator-oc-protection-microamp: + description: Set over current protection limit. This is a limit where + hardware performs emergency shutdown. Zero can be passed to disable + protection and value '1' indicates that protection should be enabled but + limit setting can be omitted. + + regulator-oc-error-microamp: + description: Set over current error limit. This is a limit where part of + the hardware propably is malfunctional and damage prevention is requested. + Zero can be passed to disable error detection and value '1' indicates + that detection should be enabled but limit setting can be omitted. + + regulator-oc-warn-microamp: + description: Set over current warning limit. This is a limit where hardware + is assumed still to be functional but approaching limit where it gets + damaged. Recovery actions should be initiated. Zero can be passed to + disable detection and value '1' indicates that detection should + be enabled but limit setting can be omitted. + + regulator-ov-protection-microvolt: + description: Set over voltage protection limit. This is a limit where + hardware performs emergency shutdown. Zero can be passed to disable + protection and value '1' indicates that protection should be enabled but + limit setting can be omitted. Limit is given as microvolt offset from + voltage set to regulator. + + regulator-ov-error-microvolt: + description: Set over voltage error limit. This is a limit where part of + the hardware propably is malfunctional and damage prevention is requested + Zero can be passed to disable error detection and value '1' indicates + that detection should be enabled but limit setting can be omitted. Limit + is given as microvolt offset from voltage set to regulator. + + regulator-ov-warn-microvolt: + description: Set over voltage warning limit. This is a limit where hardware + is assumed still to be functional but approaching limit where it gets + damaged. Recovery actions should be initiated. Zero can be passed to + disable detection and value '1' indicates that detection should + be enabled but limit setting can be omitted. Limit is given as microvolt + offset from voltage set to regulator. + + regulator-uv-protection-microvolt: + description: Set over under voltage protection limit. This is a limit where + hardware performs emergency shutdown. Zero can be passed to disable + protection and value '1' indicates that protection should be enabled but + limit setting can be omitted. Limit is given as microvolt offset from + voltage set to regulator. + + regulator-uv-error-microvolt: + description: Set under voltage error limit. This is a limit where part of + the hardware propably is malfunctional and damage prevention is requested + Zero can be passed to disable error detection and value '1' indicates + that detection should be enabled but limit setting can be omitted. Limit + is given as microvolt offset from voltage set to regulator. + + regulator-uv-warn-microvolt: + description: Set over under voltage warning limit. This is a limit where + hardware is assumed still to be functional but approaching limit where + it gets damaged. Recovery actions should be initiated. Zero can be passed + to disable detection and value '1' indicates that detection should + be enabled but limit setting can be omitted. Limit is given as microvolt + offset from voltage set to regulator. + + regulator-temp-protection-kelvin: + description: Set over temperature protection limit. This is a limit where + hardware performs emergency shutdown. Zero can be passed to disable + protection and value '1' indicates that protection should be enabled but + limit setting can be omitted. + + regulator-temp-error-kelvin: + description: Set over temperature error limit. This is a limit where part of + the hardware propably is malfunctional and damage prevention is requested + Zero can be passed to disable error detection and value '1' indicates + that detection should be enabled but limit setting can be omitted. + + regulator-temp-warn-kelvin: + description: Set over temperature warning limit. This is a limit where + hardware is assumed still to be functional but approaching limit where it + gets damaged. Recovery actions should be initiated. Zero can be passed to + disable detection and value '1' indicates that detection should + be enabled but limit setting can be omitted. + regulator-active-discharge: description: | tristate, enable/disable active discharge of regulators. The values are: diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml new file mode 100644 index 000000000000..0534b0d68359 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt6160-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT6160 BuckBoost converter + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RT6160 is a high-efficiency buck-boost converter that can provide + up to 3A output current from 2025mV to 5200mV. And it support the wide + input voltage range from 2200mV to 5500mV. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT6160A/DS6160A-00.pdf + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - richtek,rt6160 + + reg: + maxItems: 1 + + enable-gpios: + description: A connection of the 'enable' gpio line. + maxItems: 1 + + richtek,vsel-active-low: + description: | + Used to indicate the 'vsel' pin active level. if not specified, use + high active level as the default. + type: boolean + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt6160@75 { + compatible = "richtek,rt6160"; + reg = <0x75>; + enable-gpios = <&gpio26 2 0>; + regulator-name = "rt6160-buckboost"; + regulator-min-microvolt = <2025000>; + regulator-max-microvolt = <5200000>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml new file mode 100644 index 000000000000..796ceac87445 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt6245-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT6245 High Current Voltage Regulator + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RT6245 is a high-performance, synchronous step-down converter + that can deliver up to 14A output current with an input supply + voltage range of 4.5V to 17V. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - richtek,rt6245 + + reg: + maxItems: 1 + + enable-gpios: + description: | + A connection of the chip 'enable' gpio line. If not provided, + it will be treat as a default-on power. + maxItems: 1 + + richtek,oc-level-select: + $ref: "/schemas/types.yaml#/definitions/uint8" + enum: [0, 1, 2, 3] + description: | + Over current level selection. Each respective value means the current + limit 8A, 14A, 12A, 10A. If this property is missing then keep in + in chip default. + + richtek,ot-level-select: + $ref: "/schemas/types.yaml#/definitions/uint8" + enum: [0, 1, 2] + description: | + Over temperature level selection. Each respective value means the degree + 150'c, 130'c, 170'c. If this property is missing then keep in chip + default. + + richtek,pgdly-time-select: + $ref: "/schemas/types.yaml#/definitions/uint8" + enum: [0, 1, 2, 3] + description: | + Power good signal delay time selection. Each respective value means the + delay time 0us, 10us, 20us, 40us. If this property is missing then keep + in chip default. + + + richtek,switch-freq-select: + $ref: "/schemas/types.yaml#/definitions/uint8" + enum: [0, 1, 2] + description: | + Buck switch frequency selection. Each respective value means 400KHz, + 800KHz, 1200KHz. If this property is missing then keep in chip default. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt6245@34 { + compatible = "richtek,rt6245"; + status = "okay"; + reg = <0x34>; + enable-gpios = <&gpio26 2 0>; + + regulator-name = "rt6245-regulator"; + regulator-min-microvolt = <437500>; + regulator-max-microvolt = <1387500>; + regulator-boot-on; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml index b6515a0cee62..7cb74cc8c5d9 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml @@ -27,6 +27,12 @@ patternProperties: Properties for single regulator. $ref: "regulator.yaml#" + properties: + rohm,ocw-fet-ron-micro-ohms: + description: | + External FET's ON-resistance. Required if VoutS1 OCP/OCW is + to be set. + required: - regulator-name diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml index 208a628f8d6c..fc16d903353e 100644 --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml @@ -17,7 +17,11 @@ properties: enum: - fsl,imx8mq-cm4 - fsl,imx8mm-cm4 + - fsl,imx8mn-cm7 + - fsl,imx8mp-cm7 + - fsl,imx8ulp-cm33 - fsl,imx7d-cm4 + - fsl,imx7ulp-cm4 - fsl,imx6sx-cm4 clocks: @@ -49,10 +53,14 @@ properties: minItems: 1 maxItems: 32 + fsl,auto-boot: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicate whether need to load the default firmware and start the remote + processor automatically. + required: - compatible - - clocks - - syscon additionalProperties: false diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt deleted file mode 100644 index 229f908fd831..000000000000 --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt +++ /dev/null @@ -1,228 +0,0 @@ -Qualcomm ADSP Peripheral Image Loader - -This document defines the binding for a component that loads and boots firmware -on the Qualcomm ADSP Hexagon core. - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,msm8974-adsp-pil" - "qcom,msm8996-adsp-pil" - "qcom,msm8996-slpi-pil" - "qcom,msm8998-adsp-pas" - "qcom,msm8998-slpi-pas" - "qcom,qcs404-adsp-pas" - "qcom,qcs404-cdsp-pas" - "qcom,qcs404-wcss-pas" - "qcom,sc7180-mpss-pas" - "qcom,sdm845-adsp-pas" - "qcom,sdm845-cdsp-pas" - "qcom,sdx55-mpss-pas" - "qcom,sm8150-adsp-pas" - "qcom,sm8150-cdsp-pas" - "qcom,sm8150-mpss-pas" - "qcom,sm8150-slpi-pas" - "qcom,sm8250-adsp-pas" - "qcom,sm8250-cdsp-pas" - "qcom,sm8250-slpi-pas" - "qcom,sm8350-adsp-pas" - "qcom,sm8350-cdsp-pas" - "qcom,sm8350-slpi-pas" - "qcom,sm8350-mpss-pas" - -- interrupts-extended: - Usage: required - Value type: <prop-encoded-array> - Definition: reference to the interrupts that match interrupt-names - -- interrupt-names: - Usage: required - Value type: <stringlist> - Definition: The interrupts needed depends on the compatible - string: - qcom,msm8974-adsp-pil: - qcom,msm8996-adsp-pil: - qcom,msm8996-slpi-pil: - qcom,msm8998-adsp-pas: - qcom,msm8998-slpi-pas: - qcom,qcs404-adsp-pas: - qcom,qcs404-cdsp-pas: - qcom,sdm845-adsp-pas: - qcom,sdm845-cdsp-pas: - qcom,sm8150-adsp-pas: - qcom,sm8150-cdsp-pas: - qcom,sm8150-slpi-pas: - qcom,sm8250-adsp-pas: - qcom,sm8250-cdsp-pas: - qcom,sm8250-slpi-pas: - qcom,sm8350-adsp-pas: - qcom,sm8350-cdsp-pas: - qcom,sm8350-slpi-pas: - must be "wdog", "fatal", "ready", "handover", "stop-ack" - qcom,qcs404-wcss-pas: - qcom,sc7180-mpss-pas: - qcom,sdx55-mpss-pas: - qcom,sm8150-mpss-pas: - qcom,sm8350-mpss-pas: - must be "wdog", "fatal", "ready", "handover", "stop-ack", - "shutdown-ack" - -- firmware-name: - Usage: optional - Value type: <string> - Definition: must list the relative firmware image path for the - Hexagon Core. - -- clocks: - Usage: required - Value type: <prop-encoded-array> - Definition: reference to the xo clock and optionally aggre2 clock to be - held on behalf of the booting Hexagon core - -- clock-names: - Usage: required - Value type: <stringlist> - Definition: must be "xo" and optionally include "aggre2" - -- cx-supply: - Usage: required - Value type: <phandle> - Definition: reference to the regulator to be held on behalf of the - booting Hexagon core - -- px-supply: - Usage: required - Value type: <phandle> - Definition: reference to the px regulator to be held on behalf of the - booting Hexagon core - -- power-domains: - Usage: required - Value type: <phandle> - Definition: reference to power-domains that match the power-domain-names - -- power-domain-names: - Usage: required - Value type: <stringlist> - Definition: The power-domains needed depend on the compatible string: - qcom,msm8974-adsp-pil: - qcom,msm8996-adsp-pil: - qcom,msm8998-adsp-pas: - must be "cx" - qcom,msm8996-slpi-pil: - must be "ss_cx" - qcom,msm8998-slpi-pas: - must be "ssc_cx" - qcom,qcs404-adsp-pas: - must be "lpi_cx" - qcom,qcs404-cdsp-pas: - qcom,qcs404-wcss-pas: - must be "mx" - qcom,sdm845-adsp-pas: - qcom,sdm845-cdsp-pas: - qcom,sm8150-adsp-pas: - qcom,sm8150-cdsp-pas: - qcom,sm8250-cdsp-pas: - qcom,sm8350-cdsp-pas: - must be "cx", "load_state" - qcom,sc7180-mpss-pas: - qcom,sm8150-mpss-pas: - qcom,sm8350-mpss-pas: - must be "cx", "load_state", "mss" - qcom,sdx55-mpss-pas: - must be "cx", "mss" - qcom,sm8250-adsp-pas: - qcom,sm8350-adsp-pas: - qcom,sm8150-slpi-pas: - qcom,sm8250-slpi-pas: - qcom,sm8350-slpi-pas: - must be "lcx", "lmx", "load_state" - -- memory-region: - Usage: required - Value type: <phandle> - Definition: reference to the reserved-memory for the ADSP - -- qcom,smem-states: - Usage: required - Value type: <phandle> - Definition: reference to the smem state for requesting the ADSP to - shut down - -- qcom,smem-state-names: - Usage: required - Value type: <stringlist> - Definition: must be "stop" - - -= SUBNODES -The adsp node may have an subnode named either "smd-edge" or "glink-edge" that -describes the communication edge, channels and devices related to the ADSP. -See ../soc/qcom/qcom,smd.txt and ../soc/qcom/qcom,glink.txt for details on how -to describe these. - - -= EXAMPLE -The following example describes the resources needed to boot control the -ADSP, as it is found on MSM8974 boards. - - adsp { - compatible = "qcom,msm8974-adsp-pil"; - - interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", - "fatal", - "ready", - "handover", - "stop-ack"; - - clocks = <&rpmcc RPM_CXO_CLK>; - clock-names = "xo"; - - cx-supply = <&pm8841_s2>; - - memory-region = <&adsp_region>; - - qcom,smem-states = <&adsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - smd-edge { - interrupts = <0 156 IRQ_TYPE_EDGE_RISING>; - - qcom,ipc = <&apcs 8 8>; - qcom,smd-edge = <1>; - }; - }; - -The following example describes the resources needed to boot control the -SLPI, as it is found on MSM8996 boards. - - slpi { - compatible = "qcom,msm8996-slpi-pil"; - interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>, - <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", - "fatal", - "ready", - "handover", - "stop-ack"; - - clocks = <&rpmcc MSM8996_RPM_SMD_XO_CLK_SRC>, - <&rpmcc MSM8996_RPM_SMD_AGGR2_NOC_CLK>; - clock-names = "xo", "aggre2"; - - cx-supply = <&pm8994_l26>; - px-supply = <&pm8994_lvs2>; - - memory-region = <&slpi_region>; - qcom,smem-states = <&slpi_smp2p_out 0>; - qcom,smem-state-names = "stop"; - }; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml new file mode 100644 index 000000000000..c597ccced623 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml @@ -0,0 +1,547 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/qcom,adsp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm ADSP Peripheral Image Loader binding + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + This document defines the binding for a component that loads and boots + firmware on the Qualcomm ADSP Hexagon core. + +properties: + compatible: + enum: + - qcom,msm8974-adsp-pil + - qcom,msm8996-adsp-pil + - qcom,msm8996-slpi-pil + - qcom,msm8998-adsp-pas + - qcom,msm8998-slpi-pas + - qcom,qcs404-adsp-pas + - qcom,qcs404-cdsp-pas + - qcom,qcs404-wcss-pas + - qcom,sc7180-mpss-pas + - qcom,sc8180x-adsp-pas + - qcom,sc8180x-cdsp-pas + - qcom,sc8180x-mpss-pas + - qcom,sdm845-adsp-pas + - qcom,sdm845-cdsp-pas + - qcom,sdx55-mpss-pas + - qcom,sm8150-adsp-pas + - qcom,sm8150-cdsp-pas + - qcom,sm8150-mpss-pas + - qcom,sm8150-slpi-pas + - qcom,sm8250-adsp-pas + - qcom,sm8250-cdsp-pas + - qcom,sm8250-slpi-pas + - qcom,sm8350-adsp-pas + - qcom,sm8350-cdsp-pas + - qcom,sm8350-slpi-pas + - qcom,sm8350-mpss-pas + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 8 + + clock-names: + minItems: 1 + maxItems: 8 + + interrupts: + minItems: 5 + maxItems: 6 + + interrupt-names: + minItems: 5 + maxItems: 6 + + resets: + minItems: 1 + maxItems: 3 + + reset-names: + minItems: 1 + maxItems: 3 + + cx-supply: + description: Phandle to the CX regulator + + px-supply: + description: Phandle to the PX regulator + + power-domains: + minItems: 1 + maxItems: 3 + + power-domain-names: + minItems: 1 + maxItems: 3 + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + description: Firmware name for the Hexagon core + + memory-region: + maxItems: 1 + description: Reference to the reserved-memory for the Hexagon core + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: States used by the AP to signal the Hexagon core + items: + - description: Stop the modem + + qcom,smem-state-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: The names of the state bits used for SMP2P output + items: + - const: stop + + qcom,halt-regs: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Phandle reference to a syscon representing TCSR followed by the + three offsets within syscon for q6, modem and nc halt registers. + + smd-edge: + type: object + description: + Qualcomm Shared Memory subnode which represents communication edge, + channels and devices related to the ADSP. + + glink-edge: + type: object + description: + Qualcomm G-Link subnode which represents communication edge, channels + and devices related to the ADSP. + +required: + - compatible + - clocks + - clock-names + - interrupts + - interrupt-names + - memory-region + - qcom,smem-states + - qcom,smem-state-names + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8974-adsp-pil + - qcom,msm8996-adsp-pil + - qcom,msm8996-slpi-pil + - qcom,msm8998-adsp-pas + - qcom,qcs404-adsp-pas + - qcom,qcs404-wcss-pas + - qcom,sc8180x-adsp-pas + - qcom,sc8180x-cdsp-pas + - qcom,sc8180x-mpss-pas + - qcom,sdm845-adsp-pas + - qcom,sdm845-cdsp-pas + - qcom,sm8150-adsp-pas + - qcom,sm8150-cdsp-pas + - qcom,sm8150-mpss-pas + - qcom,sm8150-slpi-pas + - qcom,sm8250-adsp-pas + - qcom,sm8250-cdsp-pas + - qcom,sm8250-slpi-pas + - qcom,sm8350-adsp-pas + - qcom,sm8350-cdsp-pas + - qcom,sm8350-slpi-pas + - qcom,sm8350-mpss-pas + then: + properties: + clocks: + items: + - description: XO clock + clock-names: + items: + - const: xo + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-slpi-pas + then: + properties: + clocks: + items: + - description: XO clock + - description: AGGRE2 clock + clock-names: + items: + - const: xo + - const: aggre2 + + - if: + properties: + compatible: + contains: + enum: + - qcom,qcs404-cdsp-pas + then: + properties: + clocks: + items: + - description: XO clock + - description: SWAY clock + - description: TBU clock + - description: BIMC clock + - description: AHB AON clock + - description: Q6SS SLAVE clock + - description: Q6SS MASTER clock + - description: Q6 AXIM clock + clock-names: + items: + - const: xo + - const: sway + - const: tbu + - const: bimc + - const: ahb_aon + - const: q6ss_slave + - const: q6ss_master + - const: q6_axim + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7180-mpss-pas + then: + properties: + clocks: + items: + - description: XO clock + - description: IFACE clock + - description: BUS clock + - description: NAC clock + - description: SNOC AXI clock + - description: MNOC AXI clock + clock-names: + items: + - const: xo + - const: iface + - const: bus + - const: nav + - const: snoc_axi + - const: mnoc_axi + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8974-adsp-pil + - qcom,msm8996-adsp-pil + - qcom,msm8996-slpi-pil + - qcom,msm8998-adsp-pas + - qcom,msm8998-slpi-pas + - qcom,qcs404-adsp-pas + - qcom,qcs404-cdsp-pas + - qcom,qcs404-wcss-pas + - qcom,sc8180x-adsp-pas + - qcom,sc8180x-cdsp-pas + - qcom,sdm845-adsp-pas + - qcom,sdm845-cdsp-pas + - qcom,sm8150-adsp-pas + - qcom,sm8150-cdsp-pas + - qcom,sm8150-slpi-pas + - qcom,sm8250-adsp-pas + - qcom,sm8250-cdsp-pas + - qcom,sm8250-slpi-pas + - qcom,sm8350-adsp-pas + - qcom,sm8350-cdsp-pas + - qcom,sm8350-slpi-pas + then: + properties: + interrupts: + items: + - description: Watchdog interrupt + - description: Fatal interrupt + - description: Ready interrupt + - description: Handover interrupt + - description: Stop acknowledge interrupt + interrupt-names: + items: + - const: wdog + - const: fatal + - const: ready + - const: handover + - const: stop-ack + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7180-mpss-pas + - qcom,sc8180x-mpss-pas + - qcom,sdx55-mpss-pas + - qcom,sm8150-mpss-pas + - qcom,sm8350-mpss-pas + then: + properties: + interrupts: + items: + - description: Watchdog interrupt + - description: Fatal interrupt + - description: Ready interrupt + - description: Handover interrupt + - description: Stop acknowledge interrupt + - description: Shutdown acknowledge interrupt + interrupt-names: + items: + - const: wdog + - const: fatal + - const: ready + - const: handover + - const: stop-ack + - const: shutdown-ack + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8974-adsp-pil + then: + required: + - cx-supply + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-adsp-pil + - qcom,msm8998-adsp-pas + then: + properties: + power-domains: + items: + - description: CX power domain + power-domain-names: + items: + - const: cx + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-slpi-pil + - qcom,msm8998-slpi-pas + then: + properties: + power-domains: + items: + - description: SSC-CX power domain + power-domain-names: + items: + - const: ssc_cx + required: + - px-supply + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7180-mpss-pas + then: + properties: + power-domains: + items: + - description: Load State power domain + - description: CX power domain + - description: MX power domain + - description: MSS power domain + power-domain-names: + items: + - const: load_state + - const: cx + - const: mx + - const: mss + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8150-adsp-pas + - qcom,sm8150-cdsp-pas + then: + properties: + power-domains: + items: + - description: Load State power domain + - description: CX power domain + power-domain-names: + items: + - const: load_state + - const: cx + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8150-mpss-pas + - qcom,sm8350-mpss-pas + then: + properties: + power-domains: + items: + - description: Load State power domain + - description: CX power domain + - description: MSS power domain + power-domain-names: + items: + - const: load_state + - const: cx + - const: mss + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdx55-mpss-pas + then: + properties: + power-domains: + items: + - description: CX power domain + - description: MSS power domain + power-domain-names: + items: + - const: cx + - const: mss + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8180x-adsp-pas + - qcom,sc8180x-cdsp-pas + - qcom,sm8150-slpi-pas + - qcom,sm8250-adsp-pas + - qcom,sm8250-slpi-pas + - qcom,sm8350-adsp-pas + - qcom,sm8350-slpi-pas + then: + properties: + power-domains: + items: + - description: Load State power domain + - description: LCX power domain + - description: LMX power domain + power-domain-names: + items: + - const: load_state + - const: lcx + - const: lmx + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8350-cdsp-pas + then: + properties: + power-domains: + items: + - description: Load State power domain + - description: CX power domain + - description: MXC power domain + power-domain-names: + items: + - const: load_state + - const: cx + - const: mxc + + - if: + properties: + compatible: + contains: + enum: + - qcom,qcs404-cdsp-pas + then: + properties: + resets: + items: + - description: CDSP restart + reset-names: + items: + - const: restart + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7180-mpss-pas + then: + properties: + resets: + items: + - description: MSS restart + - description: PDC reset + reset-names: + items: + - const: mss_restart + - const: pdc_reset + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/irq.h> + adsp { + compatible = "qcom,msm8974-adsp-pil"; + + interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmcc RPM_CXO_CLK>; + clock-names = "xo"; + + cx-supply = <&pm8841_s2>; + + memory-region = <&adsp_region>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + smd-edge { + interrupts = <0 156 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 8>; + qcom,smd-edge = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml index 64afdcfb613d..1e6225677e00 100644 --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml @@ -72,7 +72,6 @@ properties: - from local to remote, where ACK from the remote means that communnication as been stopped on the remote side. minItems: 1 - maxItems: 4 mbox-names: items: @@ -81,7 +80,6 @@ properties: - const: shutdown - const: detach minItems: 1 - maxItems: 4 memory-region: description: diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml index d905d614502b..130fbaacc4b1 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml @@ -14,8 +14,12 @@ description: | processor subsystems/clusters (R5FSS). The dual core cluster can be used either in a LockStep mode providing safety/fault tolerance features or in a Split mode providing two individual compute cores for doubling the compute - capacity. These are used together with other processors present on the SoC - to achieve various system level goals. + capacity on most SoCs. These are used together with other processors present + on the SoC to achieve various system level goals. + + AM64x SoCs do not support LockStep mode, but rather a new non-safety mode + called "Single-CPU" mode, where only Core0 is used, but with ability to use + Core1's TCMs as well. Each Dual-Core R5F sub-system is represented as a single DTS node representing the cluster, with a pair of child DT nodes representing @@ -33,6 +37,7 @@ properties: - ti,am654-r5fss - ti,j721e-r5fss - ti,j7200-r5fss + - ti,am64-r5fss power-domains: description: | @@ -56,11 +61,12 @@ properties: ti,cluster-mode: $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1] description: | Configuration Mode for the Dual R5F cores within the R5F cluster. - Should be either a value of 1 (LockStep mode) or 0 (Split mode), - default is LockStep mode if omitted. + Should be either a value of 1 (LockStep mode) or 0 (Split mode) on + most SoCs (AM65x, J721E, J7200), default is LockStep mode if omitted; + and should be either a value of 0 (Split mode) or 2 (Single-CPU mode) + on AM64x SoCs, default is Split mode if omitted. # R5F Processor Child Nodes: # ========================== @@ -97,6 +103,7 @@ patternProperties: - ti,am654-r5f - ti,j721e-r5f - ti,j7200-r5f + - ti,am64-r5f reg: items: @@ -198,6 +205,20 @@ patternProperties: unevaluatedProperties: false +if: + properties: + compatible: + enum: + - ti,am64-r5fss +then: + properties: + ti,cluster-mode: + enum: [0, 2] +else: + properties: + ti,cluster-mode: + enum: [0, 1] + required: - compatible - power-domains diff --git a/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt index 461dc1d8d570..463a97c11eff 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt +++ b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt @@ -48,7 +48,7 @@ The following are the mandatory properties: bindings for the reset argument specifier as per SoC, Documentation/devicetree/bindings/reset/ti-syscon-reset.txt for 66AK2HK/66AK2L/66AK2E SoCs or, - Documentation/devicetree/bindings/reset/ti,sci-reset.txt + Documentation/devicetree/bindings/reset/ti,sci-reset.yaml for 66AK2G SoCs - interrupts: Should contain an entry for each value in 'interrupt-names'. @@ -82,7 +82,7 @@ The following are mandatory properties for Keystone 2 66AK2G SoCs only: - power-domains: Should contain a phandle to a PM domain provider node and an args specifier containing the DSP device id value. This property is as per the binding, - Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml Optional properties: -------------------- diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml index 73400bc6e91d..c6c12129d6b7 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml @@ -65,7 +65,7 @@ properties: OMAP Mailbox specifier denoting the sub-mailbox, to be used for communication with the remote processor. The specifier format is as per the bindings, - Documentation/devicetree/bindings/mailbox/omap-mailbox.txt + Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml This property should match with the sub-mailbox node used in the firmware image. @@ -116,7 +116,6 @@ properties: list, in the specified order, each representing the corresponding internal RAM memory region. minItems: 1 - maxItems: 3 items: - const: l2ram - const: l1pram diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml index 63071eef1632..d7c3a78e37e6 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml @@ -36,6 +36,9 @@ properties: enum: - ti,am3356-pru # for AM335x SoC family (AM3356+ SoCs only) - ti,am4376-pru # for AM437x SoC family (AM4376+ SoCs only) + - ti,am642-pru # for PRUs in K3 AM64x SoC family + - ti,am642-rtu # for RTUs in K3 AM64x SoC family + - ti,am642-tx-pru # for Tx_PRUs in K3 AM64x SoC family - ti,am5728-pru # for AM57xx SoC family - ti,k2g-pru # for 66AK2G SoC family - ti,am654-pru # for PRUs in K3 AM65x SoC family @@ -68,6 +71,7 @@ if: enum: - ti,am654-rtu - ti,j721e-rtu + - ti,am642-rtu then: properties: $nodename: @@ -79,6 +83,7 @@ else: enum: - ti,am654-tx-pru - ti,j721e-tx-pru + - ti,am642-tx-pru then: properties: $nodename: diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml b/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml index 27c5e34a3ac6..b11ac533f914 100644 --- a/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml +++ b/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml @@ -59,7 +59,6 @@ properties: - description: SRC interrupt - description: CPU WDOG interrupts out of SRC minItems: 1 - maxItems: 2 '#reset-cells': const: 1 diff --git a/Documentation/devicetree/bindings/reset/ti,sci-reset.txt b/Documentation/devicetree/bindings/reset/ti,sci-reset.txt deleted file mode 100644 index 8b1cf022f18a..000000000000 --- a/Documentation/devicetree/bindings/reset/ti,sci-reset.txt +++ /dev/null @@ -1,62 +0,0 @@ -Texas Instruments System Control Interface (TI-SCI) Reset Controller -===================================================================== - -Some TI SoCs contain a system controller (like the Power Management Micro -Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling -the state of the various hardware modules present on the SoC. Communication -between the host processor running an OS and the system controller happens -through a protocol called TI System Control Interface (TI-SCI protocol). -For TI SCI details, please refer to the document, -Documentation/devicetree/bindings/arm/keystone/ti,sci.txt - -TI-SCI Reset Controller Node -============================ -This reset controller node uses the TI SCI protocol to perform the reset -management of various hardware modules present on the SoC. Must be a child -node of the associated TI-SCI system controller node. - -Required properties: --------------------- - - compatible : Should be "ti,sci-reset" - - #reset-cells : Should be 2. Please see the reset consumer node below for - usage details. - -TI-SCI Reset Consumer Nodes -=========================== -Each of the reset consumer nodes should have the following properties, -in addition to their own properties. - -Required properties: --------------------- - - resets : A phandle and reset specifier pair, one pair for each reset - signal that affects the device, or that the device manages. - The phandle should point to the TI-SCI reset controller node, - and the reset specifier should have 2 cell-values. The first - cell should contain the device ID. The second cell should - contain the reset mask value used by system controller. - Please refer to the protocol documentation for these values - to be used for different devices, - http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data - -Please also refer to Documentation/devicetree/bindings/reset/reset.txt for -common reset controller usage by consumers. - -Example: --------- -The following example demonstrates both a TI-SCI reset controller node and a -consumer (a DSP device) on the 66AK2G SoC. - -pmmc: pmmc { - compatible = "ti,k2g-sci"; - - k2g_reset: reset-controller { - compatible = "ti,sci-reset"; - #reset-cells = <2>; - }; -}; - -dsp0: dsp@10800000 { - ... - resets = <&k2g_reset 0x0046 0x1>; - ... -}; diff --git a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml new file mode 100644 index 000000000000..4639d2cec557 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/ti,sci-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI-SCI reset controller node bindings + +maintainers: + - Nishanth Menon <nm@ti.com> + +description: | + Some TI SoCs contain a system controller (like the Power Management Micro + Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling + the state of the various hardware modules present on the SoC. Communication + between the host processor running an OS and the system controller happens + through a protocol called TI System Control Interface (TI-SCI protocol). + + This reset controller node uses the TI SCI protocol to perform the reset + management of various hardware modules present on the SoC. Must be a child + node of the associated TI-SCI system controller node. + +properties: + $nodename: + pattern: "^reset-controller$" + + compatible: + const: ti,sci-reset + + "#reset-cells": + const: 2 + description: + The two cells represent values that the TI-SCI controller defines. + + The first cell should contain the device ID. + + The second cell should contain the reset mask corresponding to the device + used by system controller. + + Please see http://processors.wiki.ti.com/index.php/TISCI for + protocol documentation for the values to be used for different devices. + + +additionalProperties: false + +examples: + - | + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml index 23b227614366..1d38ff76d18f 100644 --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml +++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml @@ -56,7 +56,6 @@ properties: interrupts: minItems: 3 - maxItems: 4 items: - description: DirError interrupt - description: DataError interrupt diff --git a/Documentation/devicetree/bindings/rng/mtk-rng.txt b/Documentation/devicetree/bindings/rng/mtk-rng.txt deleted file mode 100644 index dfdcb5cd2ea8..000000000000 --- a/Documentation/devicetree/bindings/rng/mtk-rng.txt +++ /dev/null @@ -1,22 +0,0 @@ -Device-Tree bindings for Mediatek random number generator -found in MediaTek SoC family - -Required properties: -- compatible : Should be - "mediatek,mt7622-rng", "mediatek,mt7623-rng" : for MT7622 - "mediatek,mt7629-rng", "mediatek,mt7623-rng" : for MT7629 - "mediatek,mt7623-rng" : for MT7623 - "mediatek,mt8516-rng", "mediatek,mt7623-rng" : for MT8516 -- clocks : list of clock specifiers, corresponding to - entries in clock-names property; -- clock-names : Should contain "rng" entries; -- reg : Specifies base physical address and size of the registers - -Example: - -rng: rng@1020f000 { - compatible = "mediatek,mt7623-rng"; - reg = <0 0x1020f000 0 0x1000>; - clocks = <&infracfg CLK_INFRA_TRNG>; - clock-names = "rng"; -}; diff --git a/Documentation/devicetree/bindings/rng/mtk-rng.yaml b/Documentation/devicetree/bindings/rng/mtk-rng.yaml new file mode 100644 index 000000000000..61888e07bda0 --- /dev/null +++ b/Documentation/devicetree/bindings/rng/mtk-rng.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/rng/mtk-rng.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek Random number generator + +maintainers: + - Sean Wang <sean.wang@mediatek.com> + +properties: + $nodename: + pattern: "^rng@[0-9a-f]+$" + + compatible: + oneOf: + - enum: + - mediatek,mt7623-rng + - items: + - enum: + - mediatek,mt7622-rng + - mediatek,mt7629-rng + - mediatek,mt8365-rng + - mediatek,mt8516-rng + - const: mediatek,mt7623-rng + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: rng + +required: + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt2701-clk.h> + rng: rng@1020f000 { + compatible = "mediatek,mt7623-rng"; + reg = <0x1020f000 0x1000>; + clocks = <&infracfg CLK_INFRA_TRNG>; + clock-names = "rng"; + }; diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml index b1b0ee769b71..beeb90e55727 100644 --- a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml @@ -32,7 +32,6 @@ properties: interrupts: minItems: 1 - maxItems: 2 items: - description: RTC Alarm 0 - description: RTC Alarm 1 diff --git a/Documentation/devicetree/bindings/rtc/arm,pl031.yaml b/Documentation/devicetree/bindings/rtc/arm,pl031.yaml new file mode 100644 index 000000000000..fa5f2eda372e --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/arm,pl031.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/arm,pl031.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Primecell PL031 Real Time Clock + +select: + properties: + compatible: + contains: + const: arm,pl031 + required: + - compatible + +allOf: + - $ref: rtc.yaml# + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + compatible: + items: + - const: arm,pl031 + - const: arm,primecell + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + + start-year: true + +required: + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + rtc@10017000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x10017000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; diff --git a/Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml b/Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml index 06bd737821c1..4807c95a663c 100644 --- a/Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml @@ -21,7 +21,6 @@ properties: - description: rtc alarm interrupt - description: dryice security violation interrupt minItems: 1 - maxItems: 2 clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf8563.yaml b/Documentation/devicetree/bindings/rtc/nxp,pcf8563.yaml new file mode 100644 index 000000000000..a98b72752349 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/nxp,pcf8563.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/nxp,pcf8563.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Philips PCF8563/Epson RTC8564 Real Time Clock + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + enum: + - epson,rtc8564 + - microcrystal,rv8564 + - nxp,pca8565 + - nxp,pcf8563 + - nxp,pcf85263 + - nxp,pcf85363 + + reg: + maxItems: 1 + + "#clock-cells": + const: 0 + + clock-output-names: + maxItems: 1 + + interrupts: + maxItems: 1 + + start-year: true + wakeup-source: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + #clock-cells = <0>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/rtc/pcf85363.txt b/Documentation/devicetree/bindings/rtc/pcf85363.txt deleted file mode 100644 index 94adc1cf93d9..000000000000 --- a/Documentation/devicetree/bindings/rtc/pcf85363.txt +++ /dev/null @@ -1,17 +0,0 @@ -NXP PCF85263/PCF85363 Real Time Clock -============================ - -Required properties: -- compatible: Should contain "nxp,pcf85263" or "nxp,pcf85363". -- reg: I2C address for chip. - -Optional properties: -- interrupts: IRQ line for the RTC (not implemented). - -Example: - -pcf85363: pcf85363@51 { - compatible = "nxp,pcf85363"; - reg = <0x51>; -}; - diff --git a/Documentation/devicetree/bindings/rtc/pcf8563.txt b/Documentation/devicetree/bindings/rtc/pcf8563.txt deleted file mode 100644 index 0a900f7c8977..000000000000 --- a/Documentation/devicetree/bindings/rtc/pcf8563.txt +++ /dev/null @@ -1,29 +0,0 @@ -* Philips PCF8563/Epson RTC8564 Real Time Clock - -Philips PCF8563/Epson RTC8564 Real Time Clock - -Required properties: -- compatible: Should contain "nxp,pcf8563", - "epson,rtc8564" or - "microcrystal,rv8564" or - "nxp,pca8565" -- reg: I2C address for chip. - -Optional property: -- #clock-cells: Should be 0. -- clock-output-names: - overwrite the default clock name "pcf8563-clkout" - -Example: - -pcf8563: pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - #clock-cells = <0>; -}; - -device { -... - clocks = <&pcf8563>; -... -}; diff --git a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml new file mode 100644 index 000000000000..bdb72d3ddf2a --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/xlnx,zynqmp-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Zynq Ultrascale+ MPSoC Real Time Clock + +description: + RTC controller for the Xilinx Zynq MPSoC Real Time Clock. + The RTC controller has separate IRQ lines for seconds and alarm. + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + const: xlnx,zynqmp-rtc + + reg: + maxItems: 1 + + interrupts: + minItems: 2 + + interrupt-names: + items: + - const: alarm + - const: sec + + calibration: + description: | + calibration value for 1 sec period which will + be programmed directly to calibration register. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x1 + maximum: 0x1FFFFF + default: 0x198233 + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + rtc: rtc@ffa60000 { + compatible = "xlnx,zynqmp-rtc"; + reg = <0x0 0xffa60000 0x0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 26 4>, <0 27 4>; + interrupt-names = "alarm", "sec"; + calibration = <0x198233>; + }; + }; diff --git a/Documentation/devicetree/bindings/rtc/xlnx-rtc.txt b/Documentation/devicetree/bindings/rtc/xlnx-rtc.txt deleted file mode 100644 index 0df6f016b1b7..000000000000 --- a/Documentation/devicetree/bindings/rtc/xlnx-rtc.txt +++ /dev/null @@ -1,25 +0,0 @@ -* Xilinx Zynq Ultrascale+ MPSoC Real Time Clock - -RTC controller for the Xilinx Zynq MPSoC Real Time Clock -Separate IRQ lines for seconds and alarm - -Required properties: -- compatible: Should be "xlnx,zynqmp-rtc" -- reg: Physical base address of the controller and length - of memory mapped region. -- interrupts: IRQ lines for the RTC. -- interrupt-names: interrupt line names eg. "sec" "alarm" - -Optional: -- calibration: calibration value for 1 sec period which will - be programmed directly to calibration register - -Example: -rtc: rtc@ffa60000 { - compatible = "xlnx,zynqmp-rtc"; - reg = <0x0 0xffa60000 0x100>; - interrupt-parent = <&gic>; - interrupts = <0 26 4>, <0 27 4>; - interrupt-names = "alarm", "sec"; - calibration = <0x198233>; -}; diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml index 41f57c448621..a0bf061b80fe 100644 --- a/Documentation/devicetree/bindings/serial/8250.yaml +++ b/Documentation/devicetree/bindings/serial/8250.yaml @@ -10,7 +10,7 @@ maintainers: - devicetree@vger.kernel.org allOf: - - $ref: /schemas/serial.yaml# + - $ref: serial.yaml# - if: anyOf: - required: diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml new file mode 100644 index 000000000000..1c826fcf5828 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/8250_omap.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for 8250 compliant UARTs on TI's OMAP2+ and K3 SoCs + +maintainers: + - Vignesh Raghavendra <vigneshr@ti.com> + +allOf: + - $ref: /schemas/serial/serial.yaml# + - $ref: /schemas/serial/rs485.yaml# + +properties: + compatible: + oneOf: + - enum: + - ti,am3352-uart + - ti,am4372-uart + - ti,am654-uart + - ti,dra742-uart + - ti,omap2-uart + - ti,omap3-uart + - ti,omap4-uart + - items: + - enum: + - ti,am64-uart + - ti,j721e-uart + - const: ti,am654-uart + + ti,hwmods: + description: + Must be "uart<n>", n being the instance number (1-based) + This property is applicable only on legacy platforms mainly omap2/3 + and ti81xx and should not be used on other platforms. + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + + dmas: + minItems: 1 + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + description: + First entry is module IRQ required for normal IO operation. + Second entry is optional and corresponds to system wakeup IRQ + where supported. + + clocks: + maxItems: 1 + + clock-names: + const: fclk + + rts-gpios: true + cts-gpios: true + dtr-gpios: true + dsr-gpios: true + rng-gpios: true + dcd-gpios: true + rs485-rts-delay: true + rs485-rts-active-low: true + rs485-rx-during-tx: true + rs485-rts-active-high: true + linux,rs485-enabled-at-boot-time: true + rts-gpio: true + power-domains: true + clock-frequency: true + current-speed: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +if: + properties: + compatible: + oneOf: + - const: ti,omap2-uart + - const: ti,omap3-uart + - const: ti,omap4-uart + +then: + properties: + ti,hwmods: + items: + - pattern: "^uart([1-9])$" + +else: + properties: + ti,hwmods: false + +examples: + - | + serial@49042000 { + compatible = "ti,omap3-uart"; + reg = <0x49042000 0x400>; + interrupts = <80>; + dmas = <&sdma 81 &sdma 82>; + dma-names = "tx", "rx"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml index 75ebc9952a99..7487aa6ef849 100644 --- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml @@ -55,6 +55,11 @@ properties: - const: pclk - const: baud + fifo-size: + description: The fifo size supported by the UART channel. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [64, 128] + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml index 46c62745f901..6d176588df47 100644 --- a/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml +++ b/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml @@ -10,7 +10,7 @@ maintainers: - Al Cooper <alcooperx@gmail.com> allOf: - - $ref: /schemas/serial.yaml# + - $ref: serial.yaml# description: |+ The Broadcom UART is based on the basic 8250 UART but with diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml index 2b06c6ce4a75..9d949296a142 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml @@ -71,6 +71,18 @@ properties: received, and that the peripheral should invert its input using the INVR registers. + fsl,dma-info: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + description: | + First cell contains the size of DMA buffer chunks, second cell contains + the amount of chunks used for the device. Multiplying both numbers is + the total size of memory used for receiving data. + When not being configured the system will use default settings, which + are sensible for most use cases. If you need low latency processing on + slow connections this needs to be configured appropriately. + uart-has-rtscts: true rs485-rts-delay: true diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml index bd21060d26e0..a90c971b4f1f 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml @@ -36,14 +36,12 @@ properties: - description: ipg clock - description: baud clock minItems: 1 - maxItems: 2 clock-names: items: - const: ipg - const: baud minItems: 1 - maxItems: 2 dmas: items: diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml index 7748d8c3bab8..b432d4dff730 100644 --- a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml +++ b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml @@ -10,7 +10,7 @@ maintainers: - Paul Cercueil <paul@crapouillou.net> allOf: - - $ref: /schemas/serial.yaml# + - $ref: serial.yaml# properties: $nodename: diff --git a/Documentation/devicetree/bindings/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt index b7e0e32b9ac6..2d0dbdf32d1d 100644 --- a/Documentation/devicetree/bindings/serial/mvebu-uart.txt +++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt @@ -5,10 +5,10 @@ Required properties: - compatible: - "marvell,armada-3700-uart" for the standard variant of the UART (32 bytes FIFO, no DMA, level interrupts, 8-bit access to the - FIFO, baudrate limited to 230400). + FIFO), called also UART1. - "marvell,armada-3700-uart-ext" for the extended variant of the UART (128 bytes FIFO, DMA, front interrupts, 8-bit or 32-bit - accesses to the FIFO, baudrate unlimited by the dividers). + accesses to the FIFO), called also UART2. - reg: offset and length of the register set for the device. - clocks: UART reference clock used to derive the baudrate. If no clock is provided (possible only with the "marvell,armada-3700-uart" @@ -33,7 +33,7 @@ Required properties: Example: uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; - reg = <0x12000 0x200>; + reg = <0x12000 0x18>; clocks = <&xtalclk>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt deleted file mode 100644 index c2db8cabf2ab..000000000000 --- a/Documentation/devicetree/bindings/serial/omap_serial.txt +++ /dev/null @@ -1,40 +0,0 @@ -OMAP UART controller - -Required properties: -- compatible : should be "ti,am64-uart", "ti,am654-uart" for AM64 controllers -- compatible : should be "ti,j721e-uart", "ti,am654-uart" for J721E controllers -- compatible : should be "ti,am654-uart" for AM654 controllers -- compatible : should be "ti,omap2-uart" for OMAP2 controllers -- compatible : should be "ti,omap3-uart" for OMAP3 controllers -- compatible : should be "ti,omap4-uart" for OMAP4 controllers -- compatible : should be "ti,am4372-uart" for AM437x controllers -- compatible : should be "ti,am3352-uart" for AM335x controllers -- compatible : should be "ti,dra742-uart" for DRA7x controllers -- reg : address and length of the register space -- interrupts or interrupts-extended : Should contain the uart interrupt - specifier or both the interrupt - controller phandle and interrupt - specifier. -- ti,hwmods : Must be "uart<n>", n being the instance number (1-based) - -Optional properties: -- clock-frequency : frequency of the clock input to the UART -- dmas : DMA specifier, consisting of a phandle to the DMA controller - node and a DMA channel number. -- dma-names : "rx" for receive channel, "tx" for transmit channel. -- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt -- rs485-rts-active-high: drive RTS high when sending (default is low). -- clocks: phandle to the functional clock as per - Documentation/devicetree/bindings/clock/clock-bindings.txt - -Example: - - uart4: serial@49042000 { - compatible = "ti,omap3-uart"; - reg = <0x49042000 0x400>; - interrupts = <80>; - dmas = <&sdma 81 &sdma 82>; - dma-names = "tx", "rx"; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - }; diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml index 1f8e9f2644b6..5ea00f8a283d 100644 --- a/Documentation/devicetree/bindings/serial/pl011.yaml +++ b/Documentation/devicetree/bindings/serial/pl011.yaml @@ -10,7 +10,7 @@ maintainers: - Rob Herring <robh@kernel.org> allOf: - - $ref: /schemas/serial.yaml# + - $ref: serial.yaml# # Need a custom select here or 'arm,primecell' will match on lots of nodes select: @@ -24,12 +24,9 @@ select: properties: compatible: - oneOf: - - items: - - const: arm,pl011 - - const: arm,primecell - - items: - - const: arm,primecell + items: + - const: arm,pl011 + - const: arm,primecell reg: maxItems: 1 @@ -103,7 +100,7 @@ dependencies: poll-rate-ms: [ auto-poll ] poll-timeout-ms: [ auto-poll ] -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml index a344369285b6..a644e5af12b2 100644 --- a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml +++ b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml @@ -10,7 +10,7 @@ maintainers: - Oleksij Rempel <o.rempel@pengutronix.de> allOf: - - $ref: /schemas/serial.yaml# + - $ref: serial.yaml# properties: compatible: @@ -35,7 +35,7 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml index 82aefdb0d45e..e98ec48fee46 100644 --- a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml @@ -35,7 +35,7 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml index 22d76829f7ae..6b8731f7f2fb 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -64,6 +64,10 @@ properties: - const: renesas,rcar-gen3-scif # R-Car Gen3 and RZ/G2 - const: renesas,scif # generic SCIF compatible UART + - items: + - enum: + - renesas,scif-r9a07g044 # RZ/G2{L,LC} + reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 97ec8a093bf3..f064e5b76cf1 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -44,7 +44,6 @@ properties: clock-names: description: N = 0 is allowed for SoCs without internal baud clock mux. minItems: 2 - maxItems: 5 items: - const: uart - pattern: '^clk_uart_baud[0-3]$' @@ -82,7 +81,7 @@ required: unevaluatedProperties: false allOf: - - $ref: /schemas/serial.yaml# + - $ref: serial.yaml# - if: properties: diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index 2fdf4ed198da..c75ba3fb6465 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -23,6 +23,8 @@ properties: $nodename: pattern: "^serial(@.*)?$" + label: true + cts-gpios: maxItems: 1 description: diff --git a/Documentation/devicetree/bindings/serial/sifive-serial.yaml b/Documentation/devicetree/bindings/serial/sifive-serial.yaml index 5fa94dacbba9..09aae43f65a7 100644 --- a/Documentation/devicetree/bindings/serial/sifive-serial.yaml +++ b/Documentation/devicetree/bindings/serial/sifive-serial.yaml @@ -12,7 +12,7 @@ maintainers: - Palmer Dabbelt <palmer@sifive.com> allOf: - - $ref: /schemas/serial.yaml# + - $ref: serial.yaml# properties: compatible: @@ -49,7 +49,7 @@ required: - interrupts - clocks -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml index 87ef1e218152..b49fda5e608f 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml @@ -10,7 +10,7 @@ maintainers: - Rob Herring <robh@kernel.org> allOf: - - $ref: /schemas/serial.yaml# + - $ref: serial.yaml# properties: compatible: @@ -23,6 +23,7 @@ properties: - items: - enum: - rockchip,px30-uart + - rockchip,rk1808-uart - rockchip,rk3036-uart - rockchip,rk3066-uart - rockchip,rk3188-uart @@ -31,6 +32,7 @@ properties: - rockchip,rk3328-uart - rockchip,rk3368-uart - rockchip,rk3399-uart + - rockchip,rk3568-uart - rockchip,rv1108-uart - const: snps,dw-apb-uart - items: diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml index 71a6426bc558..f50f4ca893a0 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml @@ -112,8 +112,7 @@ required: - interrupts - clocks -additionalProperties: - type: object +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml b/Documentation/devicetree/bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml new file mode 100644 index 000000000000..2cd3bc6bd8d6 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/microchip/microchip,polarfire-soc-sys-controller.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) system controller + +maintainers: + - Conor Dooley <conor.dooley@microchip.com> + +description: | + The PolarFire SoC system controller is communicated with via a mailbox. + This document describes the bindings for the client portion of that mailbox. + + +properties: + mboxes: + maxItems: 1 + + compatible: + const: microchip,polarfire-soc-sys-controller + +required: + - compatible + - mboxes + +additionalProperties: false + +examples: + - | + syscontroller: syscontroller { + compatible = "microchip,polarfire-soc-sys-controller"; + mboxes = <&mbox 0>; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml index 84671950ca0d..4663c2bcad50 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -164,7 +164,6 @@ patternProperties: interrupts: minItems: 1 - maxItems: 2 items: - description: UART core irq - description: Wakeup irq (RX GPIO) diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt deleted file mode 100644 index 6217e64309de..000000000000 --- a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt +++ /dev/null @@ -1,65 +0,0 @@ -Texas Instruments TI-SCI Generic Power Domain ---------------------------------------------- - -Some TI SoCs contain a system controller (like the PMMC, etc...) that is -responsible for controlling the state of the IPs that are present. -Communication between the host processor running an OS and the system -controller happens through a protocol known as TI-SCI [1]. - -[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt - -PM Domain Node -============== -The PM domain node represents the global PM domain managed by the PMMC, which -in this case is the implementation as documented by the generic PM domain -bindings in Documentation/devicetree/bindings/power/power-domain.yaml. Because -this relies on the TI SCI protocol to communicate with the PMMC it must be a -child of the pmmc node. - -Required Properties: --------------------- -- compatible: should be "ti,sci-pm-domain" -- #power-domain-cells: Can be one of the following: - 1: Containing the device id of each node - 2: First entry should be device id - Second entry should be one of the floowing: - TI_SCI_PD_EXCLUSIVE: To allow device to be - exclusively controlled by - the requesting hosts. - TI_SCI_PD_SHARED: To allow device to be shared - by multiple hosts. - -Example (K2G): -------------- - pmmc: pmmc { - compatible = "ti,k2g-sci"; - ... - - k2g_pds: power-controller { - compatible = "ti,sci-pm-domain"; - #power-domain-cells = <1>; - }; - }; - -PM Domain Consumers -=================== -Hardware blocks belonging to a PM domain should contain a "power-domains" -property that is a phandle pointing to the corresponding PM domain node -along with an index representing the device id to be passed to the PMMC -for device control. - -Required Properties: --------------------- -- power-domains: phandle pointing to the corresponding PM domain node - and an ID representing the device. - -See http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data for the list -of valid identifiers for k2g. - -Example (K2G): --------------------- - uart0: serial@2530c00 { - compatible = "ns16550a"; - ... - power-domains = <&k2g_pds 0x002c>; - }; diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml new file mode 100644 index 000000000000..9e6cb4ee9755 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/sci-pm-domain.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI-SCI generic power domain node bindings + +maintainers: + - Nishanth Menon <nm@ti.com> + +allOf: + - $ref: /schemas/power/power-domain.yaml# + +description: | + Some TI SoCs contain a system controller (like the Power Management Micro + Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling + the state of the various hardware modules present on the SoC. Communication + between the host processor running an OS and the system controller happens + through a protocol called TI System Control Interface (TI-SCI protocol). + + This PM domain node represents the global PM domain managed by the TI-SCI + controller. Since this relies on the TI SCI protocol to communicate with + the TI-SCI controller, it must be a child of the TI-SCI controller node. + +properties: + compatible: + const: ti,sci-pm-domain + + "#power-domain-cells": + enum: [1, 2] + description: + The two cells represent values that the TI-SCI controller defines. + + The first cell should contain the device ID. + + The second cell, if cell-value is 2, should be one of the following + TI_SCI_PD_EXCLUSIVE - Allows the device to be exclusively controlled + or + TI_SCI_PD_SHARED - Allows the device to be shared by multiple hosts. + Please refer to dt-bindings/soc/ti,sci_pm_domain.h for the definitions. + + Please see http://processors.wiki.ti.com/index.php/TISCI for + protocol documentation for the values to be used for different devices. + +additionalProperties: false + +examples: + - | + k2g_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <1>; + }; + + - | + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml index dbc62821c60b..9790617af1bc 100644 --- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml +++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml @@ -100,7 +100,6 @@ patternProperties: properties: reg: minItems: 2 # On AM437x one of two PRUSS units don't contain Shared RAM. - maxItems: 3 items: - description: Address and size of the Data RAM0. - description: Address and size of the Data RAM1. @@ -111,7 +110,6 @@ patternProperties: reg-names: minItems: 2 - maxItems: 3 items: - const: dram0 - const: dram1 diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml index 67405e6d8168..19f111f40225 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml @@ -12,7 +12,11 @@ maintainers: properties: "#sound-dai-cells": - const: 0 + minimum: 0 + maximum: 1 + description: + A value of 0 is deprecated. When used, it only allows access to + the ADC/DAC and AIF1 (the CPU DAI), not the other two AIFs/DAIs. compatible: oneOf: @@ -50,7 +54,7 @@ additionalProperties: false examples: - | audio-codec@1c22e00 { - #sound-dai-cells = <0>; + #sound-dai-cells = <1>; compatible = "allwinner,sun8i-a33-codec"; reg = <0x01c22e00 0x400>; interrupts = <0 29 4>; diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml index db61f0731a20..2e35aeaa8781 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml @@ -57,7 +57,7 @@ patternProperties: rate sound-dai: - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle-array description: phandle of the CPU DAI patternProperties: @@ -71,7 +71,7 @@ patternProperties: properties: sound-dai: - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle-array description: phandle of the codec DAI required: diff --git a/Documentation/devicetree/bindings/sound/cs42l42.txt b/Documentation/devicetree/bindings/sound/cs42l42.txt index 7dfaa2ab906f..5d416fdaf023 100644 --- a/Documentation/devicetree/bindings/sound/cs42l42.txt +++ b/Documentation/devicetree/bindings/sound/cs42l42.txt @@ -81,6 +81,13 @@ Optional properties: < x1 x2 x3 x4 > Default = < 15 8 4 1> + - cirrus,hs-bias-sense-disable: This is boolean property. If present the + HSBIAS sense is disabled. Configures HSBIAS output current sense through + the external 2.21-k resistor. HSBIAS_SENSE is hardware feature to reduce + the potential pop noise during the headset plug out slowly. But on some + platforms ESD voltage will affect it causing test to fail, especially + with CTIA headset type. For different hardware setups, a designer might + want to tweak default behavior. Example: diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml index b4c190bddd84..61802a11baf4 100644 --- a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml @@ -49,7 +49,7 @@ properties: maxItems: 1 memory-region: - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 description: phandle to a node describing reserved memory (System RAM memory) The M core can't access all the DDR memory space on some platform, diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml index 4454aca34d56..f226ec13167a 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml @@ -25,6 +25,7 @@ properties: - fsl,imx8mq-spdif - fsl,imx8mm-spdif - fsl,imx8mn-spdif + - fsl,imx8ulp-spdif reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt index 0dc83cc4a236..c71c5861d787 100644 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -9,8 +9,10 @@ Required properties: - compatible : Compatible list, contains "fsl,vf610-sai", "fsl,imx6sx-sai", "fsl,imx6ul-sai", - "fsl,imx7ulp-sai", "fsl,imx8mq-sai" or - "fsl,imx8qm-sai". + "fsl,imx7ulp-sai", "fsl,imx8mq-sai", + "fsl,imx8qm-sai", "fsl,imx8mm-sai", + "fsl,imx8mn-sai", "fsl,imx8mp-sai", or + "fsl,imx8ulp-sai". - reg : Offset and length of the register set for the device. diff --git a/Documentation/devicetree/bindings/sound/imx-audio-card.yaml b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml new file mode 100644 index 000000000000..d1816dd061cf --- /dev/null +++ b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/imx-audio-card.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX audio sound card. + +maintainers: + - Shengjiu Wang <shengjiu.wang@nxp.com> + +properties: + compatible: + enum: + - fsl,imx-audio-card + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User specified audio sound card name + + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. Valid names could be power supplies, + MicBias of codec and the jacks on the board. + +patternProperties: + ".*-dai-link$": + description: + Each subnode represents a dai link. Subnodes of each dai links would be + cpu/codec dais. + + type: object + + properties: + link-name: + description: Indicates dai-link name and PCM stream name. + $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 + + format: + description: audio format. + items: + enum: + - i2s + - dsp_b + + dai-tdm-slot-num: + description: see tdm-slot.txt. + $ref: /schemas/types.yaml#/definitions/uint32 + + dai-tdm-slot-width: + description: see tdm-slot.txt. + $ref: /schemas/types.yaml#/definitions/uint32 + + cpu: + description: Holds subnode which indicates cpu dai. + type: object + properties: + sound-dai: true + + codec: + description: Holds subnode which indicates codec dai. + type: object + properties: + sound-dai: true + + fsl,mclk-equal-bclk: + description: Indicates mclk can be equal to bclk, especially for sai interface + $ref: /schemas/types.yaml#/definitions/flag + + required: + - link-name + - cpu + + additionalProperties: false + +required: + - compatible + - model + +additionalProperties: false + +examples: + - | + sound-ak4458 { + compatible = "fsl,imx-audio-card"; + model = "ak4458-audio"; + pri-dai-link { + link-name = "akcodec"; + format = "i2s"; + fsl,mclk-equal-bclk; + cpu { + sound-dai = <&sai1>; + }; + codec { + sound-dai = <&ak4458_1>, <&ak4458_2>; + }; + }; + fe-dai-link { + link-name = "HiFi-ASRC-FE"; + format = "i2s"; + cpu { + sound-dai = <&easrc>; + }; + }; + be-dai-link { + link-name = "HiFi-ASRC-BE"; + format = "dsp_b"; + dai-tdm-slot-num = <8>; + dai-tdm-slot-width = <32>; + fsl,mclk-equal-bclk; + cpu { + sound-dai = <&sai1>; + }; + codec { + sound-dai = <&ak4458_1>, <&ak4458_2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.txt b/Documentation/devicetree/bindings/sound/imx-audmux.txt deleted file mode 100644 index 2db4dcbee1b9..000000000000 --- a/Documentation/devicetree/bindings/sound/imx-audmux.txt +++ /dev/null @@ -1,28 +0,0 @@ -Freescale Digital Audio Mux (AUDMUX) device - -Required properties: - - - compatible : "fsl,imx21-audmux" for AUDMUX version firstly used - on i.MX21, or "fsl,imx31-audmux" for the version - firstly used on i.MX31. - - - reg : Should contain AUDMUX registers location and length. - -An initial configuration can be setup using child nodes. - -Required properties of optional child nodes: - - - fsl,audmux-port : Integer of the audmux port that is configured by this - child node. - - - fsl,port-config : List of configuration options for the specific port. - For imx31-audmux and above, it is a list of tuples - <ptcr pdcr>. For imx21-audmux it is a list of pcr - values. - -Example: - -audmux@21d8000 { - compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; - reg = <0x021d8000 0x4000>; -}; diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.yaml b/Documentation/devicetree/bindings/sound/imx-audmux.yaml new file mode 100644 index 000000000000..dab45c310670 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/imx-audmux.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/imx-audmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Digital Audio Mux device + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx27-audmux + - const: fsl,imx21-audmux + - items: + - enum: + - fsl,imx25-audmux + - fsl,imx35-audmux + - fsl,imx50-audmux + - fsl,imx51-audmux + - fsl,imx53-audmux + - fsl,imx6q-audmux + - fsl,imx6sl-audmux + - fsl,imx6sll-audmux + - fsl,imx6sx-audmux + - const: fsl,imx31-audmux + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: audmux + +patternProperties: + "^mux-[0-9a-z]*$": + type: object + properties: + fsl,audmux-port: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Integer of the audmux port that is configured by this child node + + fsl,port-config: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + List of configuration options for the specific port. + For imx31-audmux and above, it is a list of tuples ptcr pdcr. + For imx21-audmux it is a list of pcr values. + + required: + - fsl,audmux-port + - fsl,port-config + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + audmux@21d8000 { + compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + }; + - | + audmux@10016000 { + compatible = "fsl,imx27-audmux", "fsl,imx21-audmux"; + reg = <0x10016000 0x1000>; + clocks = <&clks 1>; + clock-names = "audmux"; + + mux-ssi0 { + fsl,audmux-port = <0>; + fsl,port-config = <0xcb205000>; + }; + + mux-pins4 { + fsl,audmux-port = <2>; + fsl,port-config = <0x00001000>; + }; + }; + - | + #include <dt-bindings/sound/fsl-imx-audmux.h> + audmux@21d8000 { + compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + + mux-ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN 0 + IMX_AUDMUX_V2_PTCR_TFSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TCSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TFSDIR 0 + IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + mux-pins3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) + 0 IMX_AUDMUX_V2_PDCR_TXRXEN + >; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml index 249970952202..5bdd30a8a404 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml @@ -28,7 +28,6 @@ properties: minItems: 2 clock-names: - minItems: 2 items: - const: pll_a - const: plla_out0 diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml index 38e52e7dbb40..63370709c768 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml @@ -34,7 +34,6 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: I2S bit clock - description: @@ -48,7 +47,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: i2s - const: sync_input diff --git a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml new file mode 100644 index 000000000000..ffb8fcfeb629 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nxp,tfa989x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP/Goodix TFA989X (TFA1) Audio Amplifiers + +maintainers: + - Stephan Gerhold <stephan@gerhold.net> + +properties: + compatible: + enum: + - nxp,tfa9895 + - nxp,tfa9897 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + sound-name-prefix: + $ref: /schemas/types.yaml#/definitions/string + description: + Used as prefix for sink/source names of the component. Must be a + unique string among multiple instances of the same component. + + vddd-supply: + description: regulator phandle for the VDDD power supply. + +required: + - compatible + - reg + - '#sound-dai-cells' + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@34 { + compatible = "nxp,tfa9895"; + reg = <0x34>; + sound-name-prefix = "Speaker Left"; + #sound-dai-cells = <0>; + }; + audio-codec@36 { + compatible = "nxp,tfa9895"; + reg = <0x36>; + sound-name-prefix = "Speaker Right"; + #sound-dai-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml index e8f716b5f875..9b225dbf8b79 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml @@ -77,6 +77,31 @@ properties: minimum: 1800000 maximum: 2850000 + qcom,hphl-jack-type-normally-closed: + description: Indicates that HPHL jack switch type is normally closed + type: boolean + + qcom,ground-jack-type-normally-closed: + description: Indicates that Headset Ground switch type is normally closed + type: boolean + + qcom,mbhc-headset-vthreshold-microvolt: + description: Voltage threshold value for headset detection + minimum: 0 + maximum: 2850000 + + qcom,mbhc-headphone-vthreshold-microvolt: + description: Voltage threshold value for headphone detection + minimum: 0 + maximum: 2850000 + + qcom,mbhc-buttons-vthreshold-microvolt: + description: + Array of 8 Voltage threshold values corresponding to headset + button0 - button7 + minItems: 8 + maxItems: 8 + clock-output-names: const: mclk @@ -159,6 +184,11 @@ examples: qcom,micbias2-microvolt = <1800000>; qcom,micbias3-microvolt = <1800000>; qcom,micbias4-microvolt = <1800000>; + qcom,hphl-jack-type-normally-closed; + qcom,ground-jack-type-normally-closed; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; clock-names = "extclk"; clocks = <&rpmhcc 2>; diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml new file mode 100644 index 000000000000..49a267b306f6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wcd938x-sdw.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for Qualcomm SoundWire Slave devices on WCD9380/WCD9385 + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC. + It has RX and TX Soundwire slave devices. This bindings is for the + slave devices. + +properties: + compatible: + const: sdw20217010d00 + + reg: + maxItems: 1 + + qcom,tx-port-mapping: + description: | + Specifies static port mapping between slave and master tx ports. + In the order of slave port index. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 4 + maxItems: 4 + + qcom,rx-port-mapping: + description: | + Specifies static port mapping between slave and master rx ports. + In the order of slave port index. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 5 + maxItems: 5 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + soundwire@3210000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x03210000 0x2000>; + wcd938x_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; + }; + + soundwire@3230000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x03230000 0x2000>; + wcd938x_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 3 4 5>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml new file mode 100644 index 000000000000..cb74ce40c2e6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wcd938x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for Qualcomm WCD9380/WCD9385 Audio Codec + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC. + It has RX and TX Soundwire slave devices. + +properties: + compatible: + enum: + - qcom,wcd9380-codec + - qcom,wcd9385-codec + + reset-gpios: + description: GPIO spec for reset line to use + maxItems: 1 + + vdd-buck-supply: + description: A reference to the 1.8V buck supply + + vdd-rxtx-supply: + description: A reference to the 1.8V rx supply + + vdd-io-supply: + description: A reference to the 1.8V I/O supply + + qcom,tx-device: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: A reference to Soundwire tx device phandle + + qcom,rx-device: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: A reference to Soundwire rx device phandle + + qcom,micbias1-microvolt: + description: micbias1 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,micbias2-microvolt: + description: micbias2 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,micbias3-microvolt: + description: micbias3 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,micbias4-microvolt: + description: micbias4 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,hphl-jack-type-normally-closed: + description: Indicates that HPHL jack switch type is normally closed + type: boolean + + qcom,ground-jack-type-normally-closed: + description: Indicates that Headset Ground switch type is normally closed + type: boolean + + qcom,mbhc-headset-vthreshold-microvolt: + description: Voltage threshold value for headset detection + minimum: 0 + maximum: 2850000 + + qcom,mbhc-headphone-vthreshold-microvolt: + description: Voltage threshold value for headphone detection + minimum: 0 + maximum: 2850000 + + qcom,mbhc-buttons-vthreshold-microvolt: + description: + Array of 8 Voltage threshold values corresponding to headset + button0 - button7 + minItems: 8 + maxItems: 8 + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reset-gpios + - qcom,tx-device + - qcom,rx-device + - qcom,micbias1-microvolt + - qcom,micbias2-microvolt + - qcom,micbias3-microvolt + - qcom,micbias4-microvolt + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + codec { + compatible = "qcom,wcd9380-codec"; + reset-gpios = <&tlmm 32 0>; + #sound-dai-cells = <1>; + qcom,tx-device = <&wcd938x_tx>; + qcom,rx-device = <&wcd938x_rx>; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,hphl-jack-type-normally-closed; + qcom,ground-jack-type-normally-closed; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + }; + + /* ... */ + + soundwire@3210000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x03210000 0x2000>; + wcd938x_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; + }; + + soundwire@3230000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x03230000 0x2000>; + wcd938x_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 3 4 5>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml index 605de3a5847f..ee936d1aa724 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -86,9 +86,11 @@ properties: power-domains: true resets: + minItems: 1 maxItems: 11 reset-names: + minItems: 1 maxItems: 11 clocks: @@ -110,6 +112,13 @@ properties: - pattern: '^dvc\.[0-1]$' - pattern: '^clk_(a|b|c|i)$' + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port(@[0-9a-f]+)?: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + port: $ref: audio-graph-port.yaml# unevaluatedProperties: false @@ -257,7 +266,6 @@ required: - "#sound-dai-cells" allOf: - - $ref: audio-graph.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.yaml b/Documentation/devicetree/bindings/sound/sgtl5000.yaml index 70b4a8831073..e762c320b574 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.yaml +++ b/Documentation/devicetree/bindings/sound/sgtl5000.yaml @@ -75,6 +75,10 @@ properties: $ref: "/schemas/types.yaml#/definitions/uint32" enum: [ 0, 1, 2, 3 ] + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml index f2443b651282..06e83461705c 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -26,7 +26,6 @@ properties: - description: Base address and size of SAI common register set. - description: Base address and size of SAI identification register set. minItems: 1 - maxItems: 2 ranges: maxItems: 1 @@ -81,14 +80,12 @@ patternProperties: - description: sai_ck clock feeding the internal clock generator. - description: MCLK clock from a SAI set as master clock provider. minItems: 1 - maxItems: 2 clock-names: items: - const: sai_ck - const: MCLK minItems: 1 - maxItems: 2 dmas: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt index ca75890f0d07..f59125bc79d1 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt @@ -6,6 +6,7 @@ Required properties: - compatible - "string" - One of: "ti,tlv320aic32x4" TLV320AIC3204 "ti,tlv320aic32x6" TLV320AIC3206, TLV320AIC3256 + "ti,tas2505" TAS2505, TAS2521 - reg: I2C slave address - supply-*: Required supply regulators are: "iov" - digital IO power supply diff --git a/Documentation/devicetree/bindings/sound/wm8750.txt b/Documentation/devicetree/bindings/sound/wm8750.txt deleted file mode 100644 index 682f221f6f38..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8750.txt +++ /dev/null @@ -1,18 +0,0 @@ -WM8750 and WM8987 audio CODECs - -These devices support both I2C and SPI (configured with pin strapping -on the board). - -Required properties: - - - compatible : "wlf,wm8750" or "wlf,wm8987" - - - reg : the I2C address of the device for I2C, the chip select - number for SPI. - -Example: - -wm8750: codec@1a { - compatible = "wlf,wm8750"; - reg = <0x1a>; -}; diff --git a/Documentation/devicetree/bindings/sound/wm8750.yaml b/Documentation/devicetree/bindings/sound/wm8750.yaml new file mode 100644 index 000000000000..24246ac7bbdf --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wm8750.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wm8750.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: WM8750 and WM8987 audio CODECs + +description: | + These devices support both I2C and SPI (configured with pin strapping + on the board). + +maintainers: + - Mark Brown <broonie@kernel.org> + +properties: + compatible: + enum: + - wlf,wm8750 + - wlf,wm8987 + + reg: + description: + The I2C address of the device for I2C, the chip select number for SPI + maxItems: 1 + +additionalProperties: false + +required: + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + compatible = "wlf,wm8750"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index e3fb553d9180..4d46c49ec32b 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -35,7 +35,6 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: controller register bus clock - description: baud rate generator and delay control clock diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml index 6ee19d49fd3c..ec5873919170 100644 --- a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml @@ -56,7 +56,6 @@ properties: reg-names: minItems: 1 - maxItems: 5 items: - const: mspi - const: bspi @@ -71,7 +70,6 @@ properties: interrupt-names: oneOf: - minItems: 1 - maxItems: 7 items: - const: mspi_done - const: mspi_halted diff --git a/Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt b/Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt deleted file mode 100644 index fb1a6728638d..000000000000 --- a/Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt +++ /dev/null @@ -1,11 +0,0 @@ -Renesas RZ/N1 SPI Controller - -This controller is based on the Synopsys DW Synchronous Serial Interface and -inherits all properties defined in snps,dw-apb-ssi.txt except for the -compatible property. - -Required properties: -- compatible : The device specific string followed by the generic RZ/N1 string. - Therefore it must be one of: - "renesas,r9a06g032-spi", "renesas,rzn1-spi" - "renesas,r9a06g033-spi", "renesas,rzn1-spi" diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index 4825157cd92e..ca91201a9926 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -67,6 +67,12 @@ properties: const: baikal,bt1-sys-ssi - description: Canaan Kendryte K210 SoS SPI Controller const: canaan,k210-spi + - description: Renesas RZ/N1 SPI Controller + items: + - enum: + - renesas,r9a06g032-spi # RZ/N1D + - renesas,r9a06g033-spi # RZ/N1S + - const: renesas,rzn1-spi # RZ/N1 reg: minItems: 1 diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.txt b/Documentation/devicetree/bindings/spi/spi-cadence.txt deleted file mode 100644 index 05a2ef945664..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-cadence.txt +++ /dev/null @@ -1,30 +0,0 @@ -Cadence SPI controller Device Tree Bindings -------------------------------------------- - -Required properties: -- compatible : Should be "cdns,spi-r1p6" or "xlnx,zynq-spi-r1p6". -- reg : Physical base address and size of SPI registers map. -- interrupts : Property with a value describing the interrupt - number. -- clock-names : List of input clock names - "ref_clk", "pclk" - (See clock bindings for details). -- clocks : Clock phandles (see clock bindings for details). - -Optional properties: -- num-cs : Number of chip selects used. - If a decoder is used, this will be the number of - chip selects after the decoder. -- is-decoded-cs : Flag to indicate whether decoder is used or not. - -Example: - - spi@e0007000 { - compatible = "xlnx,zynq-spi-r1p6"; - clock-names = "ref_clk", "pclk"; - clocks = <&clkc 26>, <&clkc 35>; - interrupt-parent = <&intc>; - interrupts = <0 49 4>; - num-cs = <4>; - is-decoded-cs = <0>; - reg = <0xe0007000 0x1000>; - } ; diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml new file mode 100644 index 000000000000..9787be21318e --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-cadence.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence SPI controller Device Tree Bindings + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + enum: + - cdns,spi-r1p6 + - xlnx,zynq-spi-r1p6 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + items: + - const: ref_clk + - const: pclk + + clocks: + maxItems: 2 + + num-cs: + description: | + Number of chip selects used. If a decoder is used, + this will be the number of chip selects after the + decoder. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + default: 4 + + is-decoded-cs: + description: | + Flag to indicate whether decoder is used or not. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + default: 0 + +unevaluatedProperties: false + +examples: + - | + spi@e0007000 { + compatible = "xlnx,zynq-spi-r1p6"; + clock-names = "ref_clk", "pclk"; + clocks = <&clkc 26>, <&clkc 35>; + interrupt-parent = <&intc>; + interrupts = <0 49 4>; + num-cs = <4>; + is-decoded-cs = <0>; + reg = <0xe0007000 0x1000>; + }; +... diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 0477396e4945..faef4f6f55b8 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -114,8 +114,11 @@ patternProperties: Compatible of the SPI device. reg: - minimum: 0 - maximum: 256 + minItems: 1 + maxItems: 256 + items: + minimum: 0 + maximum: 256 description: Chip select used by the device. diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt index e2198a389484..200c7fc7b089 100644 --- a/Documentation/devicetree/bindings/spi/spi-davinci.txt +++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt @@ -25,7 +25,7 @@ Required properties: - interrupts: interrupt number mapped to CPU. - clocks: spi clk phandle For 66AK2G this property should be set per binding, - Documentation/devicetree/bindings/clock/ti,sci-clk.txt + Documentation/devicetree/bindings/clock/ti,sci-clk.yaml SoC-specific Required Properties: diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml index d09c6355e22d..51c7622dc20b 100644 --- a/Documentation/devicetree/bindings/spi/spi-mux.yaml +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml @@ -72,7 +72,7 @@ examples: mux-controls = <&mux>; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml index 1e6cf29e6388..7f987e79337c 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml @@ -33,6 +33,7 @@ properties: - rockchip,rk3328-spi - rockchip,rk3368-spi - rockchip,rk3399-spi + - rockchip,rv1126-spi - const: rockchip,rk3066-spi reg: diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.txt b/Documentation/devicetree/bindings/spi/spi-xilinx.txt deleted file mode 100644 index 5f4ed3e5c994..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-xilinx.txt +++ /dev/null @@ -1,23 +0,0 @@ -Xilinx SPI controller Device Tree Bindings -------------------------------------------------- - -Required properties: -- compatible : Should be "xlnx,xps-spi-2.00.a", "xlnx,xps-spi-2.00.b" or "xlnx,axi-quad-spi-1.00.a" -- reg : Physical base address and size of SPI registers map. -- interrupts : Property with a value describing the interrupt - number. - -Optional properties: -- xlnx,num-ss-bits : Number of chip selects used. -- xlnx,num-transfer-bits : Number of bits per transfer. This will be 8 if not specified - -Example: - axi_quad_spi@41e00000 { - compatible = "xlnx,xps-spi-2.00.a"; - interrupt-parent = <&intc>; - interrupts = <0 31 1>; - reg = <0x41e00000 0x10000>; - xlnx,num-ss-bits = <0x1>; - xlnx,num-transfer-bits = <32>; - }; - diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml new file mode 100644 index 000000000000..593f7693bace --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-xilinx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx SPI controller Device Tree Bindings + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + enum: + - xlnx,xps-spi-2.00.a + - xlnx,xps-spi-2.00.b + - xlnx,axi-quad-spi-1.00.a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + xlnx,num-ss-bits: + description: Number of chip selects used. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 32 + + xlnx,num-transfer-bits: + description: Number of bits per transfer. This will be 8 if not specified. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16, 32] + default: 8 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + spi0: spi@41e00000 { + compatible = "xlnx,xps-spi-2.00.a"; + interrupt-parent = <&intc>; + interrupts = <0 31 1>; + reg = <0x41e00000 0x10000>; + xlnx,num-ss-bits = <0x1>; + xlnx,num-transfer-bits = <32>; + }; +... diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt deleted file mode 100644 index 0f6d37ff541c..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt +++ /dev/null @@ -1,25 +0,0 @@ -Xilinx Zynq UltraScale+ MPSoC GQSPI controller Device Tree Bindings -------------------------------------------------------------------- - -Required properties: -- compatible : Should be "xlnx,zynqmp-qspi-1.0". -- reg : Physical base address and size of GQSPI registers map. -- interrupts : Property with a value describing the interrupt - number. -- clock-names : List of input clock names - "ref_clk", "pclk" - (See clock bindings for details). -- clocks : Clock phandles (see clock bindings for details). - -Optional properties: -- num-cs : Number of chip selects used. - -Example: - qspi: spi@ff0f0000 { - compatible = "xlnx,zynqmp-qspi-1.0"; - clock-names = "ref_clk", "pclk"; - clocks = <&misc_clk &misc_clk>; - interrupts = <0 15 4>; - interrupt-parent = <&gic>; - num-cs = <1>; - reg = <0x0 0xff0f0000 0x1000>,<0x0 0xc0000000 0x8000000>; - }; diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml new file mode 100644 index 000000000000..ea72c8001256 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-zynqmp-qspi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Zynq UltraScale+ MPSoC GQSPI controller Device Tree Bindings + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + const: xlnx,zynqmp-qspi-1.0 + + reg: + maxItems: 2 + + interrupts: + maxItems: 1 + + clock-names: + items: + - const: ref_clk + - const: pclk + + clocks: + maxItems: 2 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/xlnx-zynqmp-clk.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + qspi: spi@ff0f0000 { + compatible = "xlnx,zynqmp-qspi-1.0"; + clocks = <&zynqmp_clk QSPI_REF>, <&zynqmp_clk LPD_LSBUS>; + clock-names = "ref_clk", "pclk"; + interrupts = <0 15 4>; + interrupt-parent = <&gic>; + reg = <0x0 0xff0f0000 0x0 0x1000>, + <0x0 0xc0000000 0x0 0x8000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml new file mode 100644 index 000000000000..f882903769f9 --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/hisilicon,hisi-spmi-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon SPMI controller + +maintainers: + - Mauro Carvalho Chehab <mchehab+huawei@kernel.org> + +description: | + The HiSilicon SPMI BUS controller is found on some Kirin-based designs. + It is a MIPI System Power Management (SPMI) controller. + + The PMIC part is provided by + ./Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml. + +allOf: + - $ref: spmi.yaml# + +properties: + + $nodename: + pattern: "spmi@[0-9a-f]" + + compatible: + const: hisilicon,kirin970-spmi-controller + + reg: + maxItems: 1 + + hisilicon,spmi-channel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + number of the Kirin 970 SPMI channel where the SPMI devices are connected. + +required: + - compatible + - reg + - hisilicon,spmi-channel + +patternProperties: + "@[0-9a-f]$": + type: object + + description: | + PMIC properties, which are specific to the used SPMI PMIC device(s). + When used in combination with HiSilicon 6421v600, the properties + are documented at + drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml. + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + spmi: spmi@fff24000 { + compatible = "hisilicon,kirin970-spmi-controller"; + #address-cells = <2>; + #size-cells = <0>; + reg = <0x0 0xfff24000 0x0 0x1000>; + hisilicon,spmi-channel = <2>; + + pmic@0 { + reg = <0 0>; + /* pmic properties */ + }; + }; + }; diff --git a/Documentation/devicetree/bindings/spmi/spmi.yaml b/Documentation/devicetree/bindings/spmi/spmi.yaml index 173940930719..1d243faef2f8 100644 --- a/Documentation/devicetree/bindings/spmi/spmi.yaml +++ b/Documentation/devicetree/bindings/spmi/spmi.yaml @@ -40,14 +40,15 @@ patternProperties: properties: reg: - minItems: 1 - maxItems: 2 items: - - minimum: 0 - maximum: 0xf - - enum: [ 0 ] - description: | - 0 means user ID address. 1 is reserved for group ID address. + - minItems: 1 + items: + - minimum: 0 + maximum: 0xf + - enum: [ 0 ] + description: + 0 means user ID address. 1 is reserved for group ID + address. required: - reg diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml index c1a5afa73cfe..3eda5049d183 100644 --- a/Documentation/devicetree/bindings/sram/sram.yaml +++ b/Documentation/devicetree/bindings/sram/sram.yaml @@ -28,6 +28,8 @@ properties: contains: enum: - mmio-sram + - amlogic,meson-gxbb-sram + - arm,juno-sram-ns - atmel,sama5d2-securam - rockchip,rk3288-pmu-sram @@ -80,6 +82,9 @@ patternProperties: - amlogic,meson8b-smp-sram - amlogic,meson-gxbb-scp-shmem - amlogic,meson-axg-scp-shmem + - arm,juno-scp-shmem + - arm,scmi-shmem + - arm,scp-shmem - renesas,smp-sram - rockchip,rk3066-smp-sram - samsung,exynos4210-sysram diff --git a/Documentation/devicetree/bindings/submitting-patches.rst b/Documentation/devicetree/bindings/submitting-patches.rst index 104fa8fb2c17..8087780f1685 100644 --- a/Documentation/devicetree/bindings/submitting-patches.rst +++ b/Documentation/devicetree/bindings/submitting-patches.rst @@ -7,8 +7,8 @@ Submitting Devicetree (DT) binding patches I. For patch submitters ======================= - 0) Normal patch submission rules from Documentation/process/submitting-patches.rst - applies. + 0) Normal patch submission rules from + Documentation/process/submitting-patches.rst applies. 1) The Documentation/ and include/dt-bindings/ portion of the patch should be a separate patch. The preferred subject prefix for binding patches is:: @@ -25,8 +25,8 @@ I. For patch submitters make dt_binding_check - See Documentation/devicetree/bindings/writing-schema.rst for more details about - schema and tools setup. + See Documentation/devicetree/bindings/writing-schema.rst for more details + about schema and tools setup. 3) DT binding files should be dual licensed. The preferred license tag is (GPL-2.0-only OR BSD-2-Clause). @@ -84,7 +84,8 @@ II. For kernel maintainers III. Notes ========== - 0) Please see :doc:`ABI` for details regarding devicetree ABI. + 0) Please see Documentation/devicetree/bindings/ABI.rst for details + regarding devicetree ABI. 1) This document is intended as a general familiarization with the process as decided at the 2013 Kernel Summit. When in doubt, the current word of the diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml index bf97d1fb33e7..6e0b110153b0 100644 --- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml +++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml @@ -23,14 +23,12 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: Bus Clock - description: Module Clock clock-names: minItems: 1 - maxItems: 2 items: - const: bus - const: mod diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 0242fd91b622..0b3b6af7bd5b 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -77,7 +77,6 @@ properties: nvmem-cell-names: minItems: 1 - maxItems: 2 items: - const: calib - enum: diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml index b6a6d03a08b2..2ecac754e1cd 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml +++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml @@ -24,7 +24,6 @@ properties: interrupts: minItems: 2 - maxItems: 4 items: - description: Timer 0 Interrupt - description: Timer 1 Interrupt diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml index 7f5e3af58255..df8ce87fd54b 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml @@ -35,7 +35,6 @@ properties: interrupts: minItems: 1 - maxItems: 5 items: - description: secure timer irq - description: non-secure timer irq diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml index d83a1f97f911..cd2176cad53a 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml @@ -71,14 +71,12 @@ patternProperties: interrupts: minItems: 1 - maxItems: 2 items: - description: physical timer irq - description: virtual timer irq reg: minItems: 1 - maxItems: 2 items: - description: 1st view base address - description: 2nd optional view base address diff --git a/Documentation/devicetree/bindings/timer/arm,twd-timer.yaml b/Documentation/devicetree/bindings/timer/arm,twd-timer.yaml new file mode 100644 index 000000000000..5684df6448ef --- /dev/null +++ b/Documentation/devicetree/bindings/timer/arm,twd-timer.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/arm,twd-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Timer-Watchdog Timer + +maintainers: + - Rob Herring <robh@kernel.org> + +description: + ARM 11MP, Cortex-A5 and Cortex-A9 are often associated with a per-core + Timer-Watchdog (aka TWD), which provides both a per-cpu local timer + and watchdog. + + The TWD is usually attached to a GIC to deliver its two per-processor + interrupts. + +properties: + compatible: + enum: + - arm,cortex-a9-twd-timer + - arm,cortex-a5-twd-timer + - arm,arm11mp-twd-timer + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + always-on: + description: + If present, the timer is powered through an always-on power domain, + therefore it never loses context. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + timer@2c000600 { + compatible = "arm,arm11mp-twd-timer"; + reg = <0x2c000600 0x20>; + interrupts = <GIC_PPI 13 0xf01>; + }; diff --git a/Documentation/devicetree/bindings/timer/arm,twd.txt b/Documentation/devicetree/bindings/timer/arm,twd.txt deleted file mode 100644 index 383ea19c2bf0..000000000000 --- a/Documentation/devicetree/bindings/timer/arm,twd.txt +++ /dev/null @@ -1,53 +0,0 @@ -* ARM Timer Watchdog - -ARM 11MP, Cortex-A5 and Cortex-A9 are often associated with a per-core -Timer-Watchdog (aka TWD), which provides both a per-cpu local timer -and watchdog. - -The TWD is usually attached to a GIC to deliver its two per-processor -interrupts. - -** Timer node required properties: - -- compatible : Should be one of: - "arm,cortex-a9-twd-timer" - "arm,cortex-a5-twd-timer" - "arm,arm11mp-twd-timer" - -- interrupts : One interrupt to each core - -- reg : Specify the base address and the size of the TWD timer - register window. - -Optional - -- always-on : a boolean property. If present, the timer is powered through - an always-on power domain, therefore it never loses context. - -Example: - - twd-timer@2c000600 { - compatible = "arm,arm11mp-twd-timer""; - reg = <0x2c000600 0x20>; - interrupts = <1 13 0xf01>; - }; - -** Watchdog node properties: - -- compatible : Should be one of: - "arm,cortex-a9-twd-wdt" - "arm,cortex-a5-twd-wdt" - "arm,arm11mp-twd-wdt" - -- interrupts : One interrupt to each core - -- reg : Specify the base address and the size of the TWD watchdog - register window. - -Example: - - twd-watchdog@2c000620 { - compatible = "arm,arm11mp-twd-wdt"; - reg = <0x2c000620 0x20>; - interrupts = <1 14 0xf01>; - }; diff --git a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml index a8de99b0c0f9..f32575d4b5aa 100644 --- a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml +++ b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml @@ -22,7 +22,6 @@ properties: interrupts: minItems: 1 - maxItems: 2 items: - description: Timer 1 interrupt - description: Timer 2 interrupt diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml index f0f0f121c355..c57169118b68 100644 --- a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml @@ -36,6 +36,7 @@ properties: - renesas,tmu-r8a77980 # R-Car V3H - renesas,tmu-r8a77990 # R-Car E3 - renesas,tmu-r8a77995 # R-Car D3 + - renesas,tmu-r8a779a0 # R-Car V3U - const: renesas,tmu reg: diff --git a/Documentation/devicetree/bindings/timer/renesas,tpu.txt b/Documentation/devicetree/bindings/timer/renesas,tpu.txt deleted file mode 100644 index 1d46f9de4feb..000000000000 --- a/Documentation/devicetree/bindings/timer/renesas,tpu.txt +++ /dev/null @@ -1,21 +0,0 @@ -* Renesas H8/300 Timer Pulse Unit - -The TPU is a 16bit timer/counter with configurable clock inputs and -programmable compare match. -This implementation support only cascade mode. - -Required Properties: - - - compatible: must contain "renesas,tpu" - - reg: base address and length of the registers block in 2 channel. - - clocks: a list of phandle, one for each entry in clock-names. - - clock-names: must contain "peripheral_clk" for the functional clock. - - -Example: - tpu: tpu@ffffe0 { - compatible = "renesas,tpu"; - reg = <0xffffe0 16>, <0xfffff0 12>; - clocks = <&pclk>; - clock-names = "peripheral_clk"; - }; diff --git a/Documentation/devicetree/bindings/timer/renesas,tpu.yaml b/Documentation/devicetree/bindings/timer/renesas,tpu.yaml new file mode 100644 index 000000000000..01554dff23d8 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/renesas,tpu.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/renesas,tpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas H8/300 Timer Pulse Unit + +maintainers: + - Yoshinori Sato <ysato@users.sourceforge.jp> + +description: + The TPU is a 16bit timer/counter with configurable clock inputs and + programmable compare match. + This implementation supports only cascade mode. + +select: + properties: + compatible: + contains: + const: renesas,tpu + '#pwm-cells': false + required: + - compatible + +properties: + compatible: + const: renesas,tpu + + reg: + items: + - description: First channel + - description: Second channel + + clocks: + maxItems: 1 + + clock-names: + const: fck + +required: + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + tpu: tpu@ffffe0 { + compatible = "renesas,tpu"; + reg = <0xffffe0 16>, <0xfffff0 12>; + clocks = <&pclk>; + clock-names = "fck"; + }; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 8341e9d23c1e..919a4bf03a5a 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -73,6 +73,8 @@ properties: - dallas,ds4510 # Digital Thermometer and Thermostat - dallas,ds75 + # Delta Electronics DPS920AB 920W 54V Power Supply + - delta,dps920ab # 1/4 Brick DC/DC Regulated Power Module - delta,q54sj108a2 # Devantech SRF02 ultrasonic ranger in I2C mode @@ -103,6 +105,8 @@ properties: - fsl,mpl3115 # MPR121: Proximity Capacitive Touch Sensor Controller - fsl,mpr121 + # Monolithic Power Systems Inc. multi-phase controller mp2888 + - mps,mp2888 # Monolithic Power Systems Inc. multi-phase controller mp2975 - mps,mp2975 # G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface @@ -173,8 +177,14 @@ properties: - meas,tsys01 # MEMSIC magnetometer - memsic,mmc35240 + # MEMSIC 3-axis accelerometer + - memsic,mx4005 # MEMSIC 2-axis 8-bit digital accelerometer - memsic,mxc6225 + # MEMSIC 2-axis 8-bit digital accelerometer + - memsic,mxc6255 + # MEMSIC 3-axis accelerometer + - memsic,mxc6655 # Microchip differential I2C ADC, 1 Channel, 18 bit - microchip,mcp3421 # Microchip differential I2C ADC, 2 Channel, 18 bit @@ -259,6 +269,10 @@ properties: - sensirion,sgpc3 # Sensirion multi-pixel gas sensor with I2C interface - sensirion,sgp30 + # Sensortek 3 axis accelerometer + - sensortek,stk8312 + # Sensortek 3 axis accelerometer + - sensortek,stk8ba50 # SGX Sensortech VZ89X Sensors - sgx,vz89x # Relative Humidity and Temperature Sensors @@ -268,6 +282,8 @@ properties: # Socionext SynQuacer TPM MMIO module - socionext,synquacer-tpm-mmio # i2c serial eeprom (24cxx) + - sparkfun,qwiic-joystick + # SparkFun Qwiic Joystick (COM-15168) with i2c interface - st,24c256 # Ambient Light Sensor with SMBUS/Two Wire Serial Interface - taos,tsl2550 diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml index 0f520f17735e..933fa356d2ce 100644 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml @@ -22,6 +22,9 @@ properties: - allwinner,sun8i-a83t-musb - allwinner,sun50i-h6-musb - const: allwinner,sun8i-a33-musb + - items: + - const: allwinner,sun50i-h616-musb + - const: allwinner,sun8i-h3-musb reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml index a407e1143cf4..dc9d6ed0781d 100644 --- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml +++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml @@ -28,9 +28,9 @@ properties: interrupts: minItems: 3 items: - - description: OTG/DRD controller interrupt - description: XHCI host controller interrupt - description: Device controller interrupt + - description: OTG/DRD controller interrupt - description: interrupt used to wake up core, e.g when usbcmd.rs is cleared by xhci core, this interrupt is optional @@ -75,6 +75,7 @@ required: - reg - reg-names - interrupts + - interrupt-names additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index e5ee51b7b470..10c7d9b6cc53 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -24,6 +24,7 @@ properties: - rockchip,rk3188-usb - rockchip,rk3228-usb - rockchip,rk3288-usb + - rockchip,rk3308-usb - rockchip,rk3328-usb - rockchip,rk3368-usb - rockchip,rv1108-usb diff --git a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml index 4241d38d5864..1d893d3d3432 100644 --- a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml +++ b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml @@ -30,14 +30,12 @@ properties: - description: usb irq from max3420 - description: vbus detection irq minItems: 1 - maxItems: 2 interrupt-names: items: - const: udc - const: vbus minItems: 1 - maxItems: 2 spi-max-frequency: maximum: 26000000 diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml index e60e590dbe12..8428415896ce 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -25,7 +25,6 @@ properties: reg: minItems: 2 - maxItems: 3 items: - description: XUSB device controller registers - description: XUSB device PCI Config registers @@ -33,7 +32,6 @@ properties: reg-names: minItems: 2 - maxItems: 3 items: - const: base - const: fpci @@ -45,7 +43,6 @@ properties: clocks: minItems: 4 - maxItems: 5 items: - description: Clock to enable core XUSB dev clock. - description: Clock to enable XUSB super speed clock. @@ -55,7 +52,6 @@ properties: clock-names: minItems: 4 - maxItems: 5 items: - const: dev - const: ss diff --git a/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml b/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml new file mode 100644 index 000000000000..a88f99adfe8e --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nxp,isp1760.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP ISP1760 family controller bindings + +maintainers: + - Sebastian Siewior <bigeasy@linutronix.de> + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: | + NXP ISP1760 family, which includes ISP1760/1761/1763 devicetree controller + bindings + +properties: + compatible: + enum: + - nxp,usb-isp1760 + - nxp,usb-isp1761 + - nxp,usb-isp1763 + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: Host controller interrupt + - description: Device controller interrupt in isp1761 + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + - const: host + - const: peripheral + + bus-width: + description: + Number of data lines. + enum: [8, 16, 32] + default: 32 + + dr_mode: + enum: + - host + - peripheral + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + usb@40200000 { + compatible = "nxp,usb-isp1763"; + reg = <0x40200000 0x100000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <16>; + dr_mode = "host"; + }; + +... diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index 413299b5fe2b..4e6451789806 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -19,6 +19,8 @@ properties: - qcom,sc7280-dwc3 - qcom,sdm845-dwc3 - qcom,sdx55-dwc3 + - qcom,sm4250-dwc3 + - qcom,sm6115-dwc3 - qcom,sm8150-dwc3 - qcom,sm8250-dwc3 - qcom,sm8350-dwc3 diff --git a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml new file mode 100644 index 000000000000..04ee255eb4f0 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/realtek,rts5411.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for the Realtek RTS5411 USB 3.0 hub controller + +maintainers: + - Matthias Kaehlcke <mka@chromium.org> + +allOf: + - $ref: usb-device.yaml# + +properties: + compatible: + items: + - enum: + - usbbda,5411 + - usbbda,411 + + reg: true + + vdd-supply: + description: + phandle to the regulator that provides power to the hub. + + companion-hub: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: + phandle to the companion hub on the controller. + +required: + - companion-hub + - compatible + - reg + +additionalProperties: false + +examples: + - | + usb { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usbbda,5411"; + reg = <1>; + vdd-supply = <&pp3300_hub>; + companion-hub = <&hub_3_0>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usbbda,411"; + reg = <2>; + vdd-supply = <&pp3300_hub>; + companion-hub = <&hub_2_0>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index e67223d90bb7..ad73339ffe1d 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -53,7 +53,6 @@ properties: clocks: minItems: 1 - maxItems: 3 items: - description: USB 2.0 host - description: USB 2.0 peripheral @@ -86,7 +85,6 @@ properties: dma-names: minItems: 2 - maxItems: 4 items: - const: ch0 - const: ch1 @@ -100,7 +98,6 @@ properties: resets: minItems: 1 - maxItems: 2 items: - description: USB 2.0 host - description: USB 2.0 peripheral diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml index 7ec87a783c5c..a634774c537c 100644 --- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml @@ -27,7 +27,7 @@ properties: description: PM domain provider node and an args specifier containing the USB device id value. See, - Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml maxItems: 1 clocks: diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml index 9a068d3bc73b..f6e91a5fd8fe 100644 --- a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml @@ -47,7 +47,7 @@ properties: description: Should contain a phandle to a PM domain provider node and an args specifier containing the USB device id value. This property is as per the binding, - Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml phys: maxItems: 1 diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index b868cefc7c55..2bbc27aae977 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -472,7 +472,7 @@ patternProperties: "^hirschmann,.*": description: Hirschmann Automation and Control GmbH "^hisilicon,.*": - description: Hisilicon Limited. + description: HiSilicon Limited. "^hit,.*": description: Hitachi Ltd. "^hitex,.*": @@ -533,6 +533,8 @@ patternProperties: description: Innolux Corporation "^inside-secure,.*": description: INSIDE Secure + "^insignal,.*": + description: Insignal Ltd. "^inspur,.*": description: Inspur Corporation "^intel,.*": @@ -830,6 +832,8 @@ patternProperties: description: Opal Kelly Incorporated "^opencores,.*": description: OpenCores.org + "^openembed,.*": + description: OpenEmbed "^openrisc,.*": description: OpenRISC.io "^option,.*": @@ -1076,6 +1080,8 @@ patternProperties: description: Sony Corporation "^spansion,.*": description: Spansion Inc. + "^sparkfun,.*": + description: SparkFun Electronics "^sprd,.*": description: Spreadtrum Communications Inc. "^sst,.*": @@ -1085,6 +1091,8 @@ patternProperties: (formerly part of MStar Semiconductor, Inc.) "^st,.*": description: STMicroelectronics + "^starfive,.*": + description: StarFive Technology Co. Ltd. "^starry,.*": description: Starry Electronic Technology (ShenZhen) Co., LTD "^startek,.*": diff --git a/Documentation/devicetree/bindings/virtio/mmio.txt b/Documentation/devicetree/bindings/virtio/mmio.txt deleted file mode 100644 index 0a575f329f6e..000000000000 --- a/Documentation/devicetree/bindings/virtio/mmio.txt +++ /dev/null @@ -1,47 +0,0 @@ -* virtio memory mapped device - -See https://ozlabs.org/~rusty/virtio-spec/ for more details. - -Required properties: - -- compatible: "virtio,mmio" compatibility string -- reg: control registers base address and size including configuration space -- interrupts: interrupt generated by the device - -Required properties for virtio-iommu: - -- #iommu-cells: When the node corresponds to a virtio-iommu device, it is - linked to DMA masters using the "iommus" or "iommu-map" - properties [1][2]. #iommu-cells specifies the size of the - "iommus" property. For virtio-iommu #iommu-cells must be - 1, each cell describing a single endpoint ID. - -Optional properties: - -- iommus: If the device accesses memory through an IOMMU, it should - have an "iommus" property [1]. Since virtio-iommu itself - does not access memory through an IOMMU, the "virtio,mmio" - node cannot have both an "#iommu-cells" and an "iommus" - property. - -Example: - - virtio_block@3000 { - compatible = "virtio,mmio"; - reg = <0x3000 0x100>; - interrupts = <41>; - - /* Device has endpoint ID 23 */ - iommus = <&viommu 23> - } - - viommu: iommu@3100 { - compatible = "virtio,mmio"; - reg = <0x3100 0x100>; - interrupts = <42>; - - #iommu-cells = <1> - } - -[1] Documentation/devicetree/bindings/iommu/iommu.txt -[2] Documentation/devicetree/bindings/pci/pci-iommu.txt diff --git a/Documentation/devicetree/bindings/virtio/mmio.yaml b/Documentation/devicetree/bindings/virtio/mmio.yaml new file mode 100644 index 000000000000..d46597028cf1 --- /dev/null +++ b/Documentation/devicetree/bindings/virtio/mmio.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/virtio/mmio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: virtio memory mapped devices + +maintainers: + - Jean-Philippe Brucker <jean-philippe@linaro.org> + +description: + See https://www.oasis-open.org/committees/tc_home.php?wg_abbrev=virtio for + more details. + +properties: + compatible: + const: virtio,mmio + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#iommu-cells': + description: Required when the node corresponds to a virtio-iommu device. + const: 1 + + iommus: + description: Required for devices making accesses thru an IOMMU. + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + virtio@3000 { + compatible = "virtio,mmio"; + reg = <0x3000 0x100>; + interrupts = <41>; + + /* Device has endpoint ID 23 */ + iommus = <&viommu 23>; + }; + + viommu: iommu@3100 { + compatible = "virtio,mmio"; + reg = <0x3100 0x100>; + interrupts = <42>; + + #iommu-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/watchdog/arm,sbsa-gwdt.yaml b/Documentation/devicetree/bindings/watchdog/arm,sbsa-gwdt.yaml new file mode 100644 index 000000000000..6bfa46353c4e --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/arm,sbsa-gwdt.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/arm,sbsa-gwdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SBSA (Server Base System Architecture) Generic Watchdog + +maintainers: + - Fu Wei <fu.wei@linaro.org> + +description: | + The SBSA Generic Watchdog Timer is used to force a reset of the system after + two stages of timeout have elapsed. A detailed definition of the watchdog + timer can be found in the ARM document: ARM-DEN-0029 - Server Base System + Architecture (SBSA) + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + const: arm,sbsa-gwdt + + reg: + items: + - description: Watchdog control frame + - description: Refresh frame + + interrupts: + description: The Watchdog Signal 0 (WS0) SPI (Shared Peripheral Interrupt) + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + + watchdog@2a440000 { + compatible = "arm,sbsa-gwdt"; + reg = <0x2a440000 0x1000>, + <0x2a450000 0x1000>; + interrupts = <0 27 4>; + timeout-sec = <30>; + }; +... diff --git a/Documentation/devicetree/bindings/watchdog/arm,twd-wdt.yaml b/Documentation/devicetree/bindings/watchdog/arm,twd-wdt.yaml new file mode 100644 index 000000000000..bb8901854222 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/arm,twd-wdt.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/arm,twd-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Timer-Watchdog Watchdog + +maintainers: + - Rob Herring <robh@kernel.org> + +description: + ARM 11MP, Cortex-A5 and Cortex-A9 are often associated with a per-core + Timer-Watchdog (aka TWD), which provides both a per-cpu local timer + and watchdog. + + The TWD is usually attached to a GIC to deliver its two per-processor + interrupts. + +properties: + compatible: + enum: + - arm,cortex-a9-twd-wdt + - arm,cortex-a5-twd-wdt + - arm,arm11mp-twd-wdt + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + watchdog@2c000620 { + compatible = "arm,arm11mp-twd-wdt"; + reg = <0x2c000620 0x20>; + interrupts = <GIC_PPI 14 0xf01>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml new file mode 100644 index 000000000000..9856cd76c28d --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/atmel,sama5d4-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel SAMA5D4 Watchdog Timer (WDT) Controller + +maintainers: + - Eugen Hristev <eugen.hristev@microchip.com> + +allOf: + - $ref: "watchdog.yaml#" + +properties: + compatible: + enum: + - atmel,sama5d4-wdt + - microchip,sam9x60-wdt + - microchip,sama7g5-wdt + + reg: + maxItems: 1 + + atmel,watchdog-type: + $ref: /schemas/types.yaml#/definitions/string + description: should be hardware or software. + oneOf: + - description: + Enable watchdog fault reset. A watchdog fault triggers + watchdog reset. + const: hardware + - description: + Enable watchdog fault interrupt. A watchdog fault asserts + watchdog interrupt. + const: software + default: hardware + + atmel,idle-halt: + $ref: /schemas/types.yaml#/definitions/flag + description: | + present if you want to stop the watchdog when the CPU is in idle state. + CAUTION: This property should be used with care, it actually makes the + watchdog not counting when the CPU is in idle state, therefore the + watchdog reset time depends on mean CPU usage and will not reset at all + if the CPU stop working while it is in idle state, which is probably + not what you want. + + atmel,dbg-halt: + $ref: /schemas/types.yaml#/definitions/flag + description: | + present if you want to stop the watchdog when the CPU is in debug state. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + watchdog@fc068640 { + compatible = "atmel,sama5d4-wdt"; + reg = <0xfc068640 0x10>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>; + timeout-sec = <10>; + atmel,watchdog-type = "hardware"; + atmel,dbg-halt; + atmel,idle-halt; + }; + +... diff --git a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt deleted file mode 100644 index 44727fcc2729..000000000000 --- a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt +++ /dev/null @@ -1,34 +0,0 @@ -* Atmel SAMA5D4 Watchdog Timer (WDT) Controller - -Required properties: -- compatible: "atmel,sama5d4-wdt" or "microchip,sam9x60-wdt" -- reg: base physical address and length of memory mapped region. - -Optional properties: -- timeout-sec: watchdog timeout value (in seconds). -- interrupts: interrupt number to the CPU. -- atmel,watchdog-type: should be "hardware" or "software". - "hardware": enable watchdog fault reset. A watchdog fault triggers - watchdog reset. - "software": enable watchdog fault interrupt. A watchdog fault asserts - watchdog interrupt. -- atmel,idle-halt: present if you want to stop the watchdog when the CPU is - in idle state. - CAUTION: This property should be used with care, it actually makes the - watchdog not counting when the CPU is in idle state, therefore the - watchdog reset time depends on mean CPU usage and will not reset at all - if the CPU stop working while it is in idle state, which is probably - not what you want. -- atmel,dbg-halt: present if you want to stop the watchdog when the CPU is - in debug state. - -Example: - watchdog@fc068640 { - compatible = "atmel,sama5d4-wdt"; - reg = <0xfc068640 0x10>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>; - timeout-sec = <10>; - atmel,watchdog-type = "hardware"; - atmel,dbg-halt; - atmel,idle-halt; - }; diff --git a/Documentation/devicetree/bindings/watchdog/mstar,msc313e-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mstar,msc313e-wdt.yaml new file mode 100644 index 000000000000..e3e8b86dbf63 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/mstar,msc313e-wdt.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/mstar,msc313e-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MStar Watchdog Device Tree Bindings + +maintainers: + - Daniel Palmer <daniel@0x0f.com> + - Romain Perier <romain.perier@gmail.com> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + enum: + - mstar,msc313e-wdt + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - clocks + - reg + +unevaluatedProperties: false + +examples: + - | + watchdog@6000 { + compatible = "mstar,msc313e-wdt"; + reg = <0x6000 0x1f>; + clocks = <&xtal_div2>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt index e36ba60de829..416d716403f6 100644 --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt @@ -1,5 +1,8 @@ Mediatek SoCs Watchdog timer +The watchdog supports a pre-timeout interrupt that fires timeout-sec/2 +before the expiry. + Required properties: - compatible should contain: @@ -13,10 +16,12 @@ Required properties: "mediatek,mt8183-wdt": for MT8183 "mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516 "mediatek,mt8192-wdt": for MT8192 + "mediatek,mt8195-wdt", "mediatek,mt6589-wdt": for MT8195 - reg : Specifies base physical address and size of the registers. Optional properties: +- interrupts: Watchdog pre-timeout (bark) interrupt. - timeout-sec: contains the watchdog timeout in seconds. - #reset-cells: Should be 1. @@ -26,6 +31,7 @@ watchdog: watchdog@10007000 { compatible = "mediatek,mt8183-wdt", "mediatek,mt6589-wdt"; reg = <0 0x10007000 0 0x100>; + interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>; timeout-sec = <10>; #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml index b8e4118945a0..ba60bdf1fecc 100644 --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml @@ -17,6 +17,7 @@ properties: enum: - qcom,apss-wdt-qcs404 - qcom,apss-wdt-sc7180 + - qcom,apss-wdt-sc7280 - qcom,apss-wdt-sdm845 - qcom,apss-wdt-sdx55 - qcom,apss-wdt-sm8150 diff --git a/Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt b/Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt deleted file mode 100644 index 6f2d5f91964d..000000000000 --- a/Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt +++ /dev/null @@ -1,31 +0,0 @@ -* SBSA (Server Base System Architecture) Generic Watchdog - -The SBSA Generic Watchdog Timer is used to force a reset of the system -after two stages of timeout have elapsed. A detailed definition of the -watchdog timer can be found in the ARM document: ARM-DEN-0029 - Server -Base System Architecture (SBSA) - -Required properties: -- compatible: Should at least contain "arm,sbsa-gwdt". - -- reg: Each entry specifies the base physical address of a register frame - and the length of that frame; currently, two frames must be defined, - in this order: - 1: Watchdog control frame; - 2: Refresh frame. - -- interrupts: Should contain the Watchdog Signal 0 (WS0) SPI (Shared - Peripheral Interrupt) number of SBSA Generic Watchdog. - -Optional properties -- timeout-sec: Watchdog timeout values (in seconds). - -Example for FVP Foundation Model v8: - -watchdog@2a440000 { - compatible = "arm,sbsa-gwdt"; - reg = <0x0 0x2a440000 0 0x1000>, - <0x0 0x2a450000 0 0x1000>; - interrupts = <0 27 4>; - timeout-sec = <30>; -}; diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml index b58596b1831d..6461eb4f4a27 100644 --- a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml @@ -27,6 +27,7 @@ properties: - rockchip,rk3328-wdt - rockchip,rk3368-wdt - rockchip,rk3399-wdt + - rockchip,rk3568-wdt - rockchip,rv1108-wdt - const: snps,dw-wdt diff --git a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml index 3f1ba1d6c6b5..481bf91f988a 100644 --- a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml +++ b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml @@ -27,7 +27,6 @@ properties: - description: Low speed clock - description: Optional peripheral clock minItems: 1 - maxItems: 2 clock-names: items: diff --git a/Documentation/devicetree/bindings/writing-bindings.rst b/Documentation/devicetree/bindings/writing-bindings.rst index 45ff426d0019..f7dfb98c156e 100644 --- a/Documentation/devicetree/bindings/writing-bindings.rst +++ b/Documentation/devicetree/bindings/writing-bindings.rst @@ -52,7 +52,8 @@ Properties constraints specific to the device. - DO use common property unit suffixes for properties with scientific units. - See property-units.txt. + Recommended suffixes are listed at + https://github.com/devicetree-org/dt-schema/blob/master/schemas/property-units.yaml - DO define properties in terms of constraints. How many entries? What are possible values? What is the order? |