diff options
Diffstat (limited to 'Documentation/filesystems')
| -rw-r--r-- | Documentation/filesystems/cifs/AUTHORS | 63 | ||||
| -rw-r--r-- | Documentation/filesystems/cifs/CHANGES | 4 | ||||
| -rw-r--r-- | Documentation/filesystems/cifs/README | 743 | ||||
| -rw-r--r-- | Documentation/filesystems/cifs/TODO | 119 | ||||
| -rw-r--r-- | Documentation/filesystems/cifs/cifs.txt | 45 | ||||
| -rwxr-xr-x | Documentation/filesystems/cifs/winucase_convert.pl | 62 |
6 files changed, 0 insertions, 1036 deletions
diff --git a/Documentation/filesystems/cifs/AUTHORS b/Documentation/filesystems/cifs/AUTHORS deleted file mode 100644 index 75865da2ce14..000000000000 --- a/Documentation/filesystems/cifs/AUTHORS +++ /dev/null @@ -1,63 +0,0 @@ -Original Author -=============== -Steve French (sfrench@samba.org) - -The author wishes to express his appreciation and thanks to: -Andrew Tridgell (Samba team) for his early suggestions about smb/cifs VFS -improvements. Thanks to IBM for allowing me time and test resources to pursue -this project, to Jim McDonough from IBM (and the Samba Team) for his help, to -the IBM Linux JFS team for explaining many esoteric Linux filesystem features. -Jeremy Allison of the Samba team has done invaluable work in adding the server -side of the original CIFS Unix extensions and reviewing and implementing -portions of the newer CIFS POSIX extensions into the Samba 3 file server. Thank -Dave Boutcher of IBM Rochester (author of the OS/400 smb/cifs filesystem client) -for proving years ago that very good smb/cifs clients could be done on Unix-like -operating systems. Volker Lendecke, Andrew Tridgell, Urban Widmark, John -Newbigin and others for their work on the Linux smbfs module. Thanks to -the other members of the Storage Network Industry Association CIFS Technical -Workgroup for their work specifying this highly complex protocol and finally -thanks to the Samba team for their technical advice and encouragement. - -Patch Contributors ------------------- -Zwane Mwaikambo -Andi Kleen -Amrut Joshi -Shobhit Dayal -Sergey Vlasov -Richard Hughes -Yury Umanets -Mark Hamzy (for some of the early cifs IPv6 work) -Domen Puncer -Jesper Juhl (in particular for lots of whitespace/formatting cleanup) -Vince Negri and Dave Stahl (for finding an important caching bug) -Adrian Bunk (kcalloc cleanups) -Miklos Szeredi -Kazeon team for various fixes especially for 2.4 version. -Asser Ferno (Change Notify support) -Shaggy (Dave Kleikamp) for innumerable small fs suggestions and some good cleanup -Gunter Kukkukk (testing and suggestions for support of old servers) -Igor Mammedov (DFS support) -Jeff Layton (many, many fixes, as well as great work on the cifs Kerberos code) -Scott Lovenberg -Pavel Shilovsky (for great work adding SMB2 support, and various SMB3 features) -Aurelien Aptel (for DFS SMB3 work and some key bug fixes) -Ronnie Sahlberg (for SMB3 xattr work, bug fixes, and lots of great work on compounding) -Shirish Pargaonkar (for many ACL patches over the years) -Sachin Prabhu (many bug fixes, including for reconnect, copy offload and security) -Paulo Alcantara -Long Li (some great work on RDMA, SMB Direct) - - -Test case and Bug Report contributors -------------------------------------- -Thanks to those in the community who have submitted detailed bug reports -and debug of problems they have found: Jochen Dolze, David Blaine, -Rene Scharfe, Martin Josefsson, Alexander Wild, Anthony Liguori, -Lars Muller, Urban Widmark, Massimiliano Ferrero, Howard Owen, -Olaf Kirch, Kieron Briggs, Nick Millington and others. Also special -mention to the Stanford Checker (SWAT) which pointed out many minor -bugs in error paths. Valuable suggestions also have come from Al Viro -and Dave Miller. - -And thanks to the IBM LTC and Power test teams and SuSE and Citrix and RedHat testers for finding multiple bugs during excellent stress test runs. diff --git a/Documentation/filesystems/cifs/CHANGES b/Documentation/filesystems/cifs/CHANGES deleted file mode 100644 index 1df7f4910eb2..000000000000 --- a/Documentation/filesystems/cifs/CHANGES +++ /dev/null @@ -1,4 +0,0 @@ -See https://wiki.samba.org/index.php/LinuxCIFSKernel for summary -information (that may be easier to read than parsing the output of -"git log fs/cifs") about fixes/improvements to CIFS/SMB2/SMB3 support (changes -to cifs.ko module) by kernel version (and cifs internal module version). diff --git a/Documentation/filesystems/cifs/README b/Documentation/filesystems/cifs/README deleted file mode 100644 index 4a804619cff2..000000000000 --- a/Documentation/filesystems/cifs/README +++ /dev/null @@ -1,743 +0,0 @@ -This module supports the SMB3 family of advanced network protocols (as well -as older dialects, originally called "CIFS" or SMB1). - -The CIFS VFS module for Linux supports many advanced network filesystem -features such as hierarchical DFS like namespace, hardlinks, locking and more. -It was designed to comply with the SNIA CIFS Technical Reference (which -supersedes the 1992 X/Open SMB Standard) as well as to perform best practice -practical interoperability with Windows 2000, Windows XP, Samba and equivalent -servers. This code was developed in participation with the Protocol Freedom -Information Foundation. CIFS and now SMB3 has now become a defacto -standard for interoperating between Macs and Windows and major NAS appliances. - -Please see - MS-SMB2 (for detailed SMB2/SMB3/SMB3.1.1 protocol specification) - http://protocolfreedom.org/ and - http://samba.org/samba/PFIF/ -for more details. - - -For questions or bug reports please contact: - smfrench@gmail.com - -See the project page at: https://wiki.samba.org/index.php/LinuxCIFS_utils - -Build instructions: -================== -For Linux: -1) Download the kernel (e.g. from http://www.kernel.org) -and change directory into the top of the kernel directory tree -(e.g. /usr/src/linux-2.5.73) -2) make menuconfig (or make xconfig) -3) select cifs from within the network filesystem choices -4) save and exit -5) make - - -Installation instructions: -========================= -If you have built the CIFS vfs as module (successfully) simply -type "make modules_install" (or if you prefer, manually copy the file to -the modules directory e.g. /lib/modules/2.4.10-4GB/kernel/fs/cifs/cifs.ko). - -If you have built the CIFS vfs into the kernel itself, follow the instructions -for your distribution on how to install a new kernel (usually you -would simply type "make install"). - -If you do not have the utility mount.cifs (in the Samba 4.x source tree and on -the CIFS VFS web site) copy it to the same directory in which mount helpers -reside (usually /sbin). Although the helper software is not -required, mount.cifs is recommended. Most distros include a "cifs-utils" -package that includes this utility so it is recommended to install this. - -Note that running the Winbind pam/nss module (logon service) on all of your -Linux clients is useful in mapping Uids and Gids consistently across the -domain to the proper network user. The mount.cifs mount helper can be -found at cifs-utils.git on git.samba.org - -If cifs is built as a module, then the size and number of network buffers -and maximum number of simultaneous requests to one server can be configured. -Changing these from their defaults is not recommended. By executing modinfo - modinfo kernel/fs/cifs/cifs.ko -on kernel/fs/cifs/cifs.ko the list of configuration changes that can be made -at module initialization time (by running insmod cifs.ko) can be seen. - -Recommendations -=============== -To improve security the SMB2.1 dialect or later (usually will get SMB3) is now -the new default. To use old dialects (e.g. to mount Windows XP) use "vers=1.0" -on mount (or vers=2.0 for Windows Vista). Note that the CIFS (vers=1.0) is -much older and less secure than the default dialect SMB3 which includes -many advanced security features such as downgrade attack detection -and encrypted shares and stronger signing and authentication algorithms. -There are additional mount options that may be helpful for SMB3 to get -improved POSIX behavior (NB: can use vers=3.0 to force only SMB3, never 2.1): - "mfsymlinks" and "cifsacl" and "idsfromsid" - -Allowing User Mounts -==================== -To permit users to mount and unmount over directories they own is possible -with the cifs vfs. A way to enable such mounting is to mark the mount.cifs -utility as suid (e.g. "chmod +s /sbin/mount.cifs). To enable users to -umount shares they mount requires -1) mount.cifs version 1.4 or later -2) an entry for the share in /etc/fstab indicating that a user may -unmount it e.g. -//server/usersharename /mnt/username cifs user 0 0 - -Note that when the mount.cifs utility is run suid (allowing user mounts), -in order to reduce risks, the "nosuid" mount flag is passed in on mount to -disallow execution of an suid program mounted on the remote target. -When mount is executed as root, nosuid is not passed in by default, -and execution of suid programs on the remote target would be enabled -by default. This can be changed, as with nfs and other filesystems, -by simply specifying "nosuid" among the mount options. For user mounts -though to be able to pass the suid flag to mount requires rebuilding -mount.cifs with the following flag: CIFS_ALLOW_USR_SUID - -There is a corresponding manual page for cifs mounting in the Samba 3.0 and -later source tree in docs/manpages/mount.cifs.8 - -Allowing User Unmounts -====================== -To permit users to ummount directories that they have user mounted (see above), -the utility umount.cifs may be used. It may be invoked directly, or if -umount.cifs is placed in /sbin, umount can invoke the cifs umount helper -(at least for most versions of the umount utility) for umount of cifs -mounts, unless umount is invoked with -i (which will avoid invoking a umount -helper). As with mount.cifs, to enable user unmounts umount.cifs must be marked -as suid (e.g. "chmod +s /sbin/umount.cifs") or equivalent (some distributions -allow adding entries to a file to the /etc/permissions file to achieve the -equivalent suid effect). For this utility to succeed the target path -must be a cifs mount, and the uid of the current user must match the uid -of the user who mounted the resource. - -Also note that the customary way of allowing user mounts and unmounts is -(instead of using mount.cifs and unmount.cifs as suid) to add a line -to the file /etc/fstab for each //server/share you wish to mount, but -this can become unwieldy when potential mount targets include many -or unpredictable UNC names. - -Samba Considerations -==================== -Most current servers support SMB2.1 and SMB3 which are more secure, -but there are useful protocol extensions for the older less secure CIFS -dialect, so to get the maximum benefit if mounting using the older dialect -(CIFS/SMB1), we recommend using a server that supports the SNIA CIFS -Unix Extensions standard (e.g. almost any version of Samba ie version -2.2.5 or later) but the CIFS vfs works fine with a wide variety of CIFS servers. -Note that uid, gid and file permissions will display default values if you do -not have a server that supports the Unix extensions for CIFS (such as Samba -2.2.5 or later). To enable the Unix CIFS Extensions in the Samba server, add -the line: - - unix extensions = yes - -to your smb.conf file on the server. Note that the following smb.conf settings -are also useful (on the Samba server) when the majority of clients are Unix or -Linux: - - case sensitive = yes - delete readonly = yes - ea support = yes - -Note that server ea support is required for supporting xattrs from the Linux -cifs client, and that EA support is present in later versions of Samba (e.g. -3.0.6 and later (also EA support works in all versions of Windows, at least to -shares on NTFS filesystems). Extended Attribute (xattr) support is an optional -feature of most Linux filesystems which may require enabling via -make menuconfig. Client support for extended attributes (user xattr) can be -disabled on a per-mount basis by specifying "nouser_xattr" on mount. - -The CIFS client can get and set POSIX ACLs (getfacl, setfacl) to Samba servers -version 3.10 and later. Setting POSIX ACLs requires enabling both XATTR and -then POSIX support in the CIFS configuration options when building the cifs -module. POSIX ACL support can be disabled on a per mount basic by specifying -"noacl" on mount. - -Some administrators may want to change Samba's smb.conf "map archive" and -"create mask" parameters from the default. Unless the create mask is changed -newly created files can end up with an unnecessarily restrictive default mode, -which may not be what you want, although if the CIFS Unix extensions are -enabled on the server and client, subsequent setattr calls (e.g. chmod) can -fix the mode. Note that creating special devices (mknod) remotely -may require specifying a mkdev function to Samba if you are not using -Samba 3.0.6 or later. For more information on these see the manual pages -("man smb.conf") on the Samba server system. Note that the cifs vfs, -unlike the smbfs vfs, does not read the smb.conf on the client system -(the few optional settings are passed in on mount via -o parameters instead). -Note that Samba 2.2.7 or later includes a fix that allows the CIFS VFS to delete -open files (required for strict POSIX compliance). Windows Servers already -supported this feature. Samba server does not allow symlinks that refer to files -outside of the share, so in Samba versions prior to 3.0.6, most symlinks to -files with absolute paths (ie beginning with slash) such as: - ln -s /mnt/foo bar -would be forbidden. Samba 3.0.6 server or later includes the ability to create -such symlinks safely by converting unsafe symlinks (ie symlinks to server -files that are outside of the share) to a samba specific format on the server -that is ignored by local server applications and non-cifs clients and that will -not be traversed by the Samba server). This is opaque to the Linux client -application using the cifs vfs. Absolute symlinks will work to Samba 3.0.5 or -later, but only for remote clients using the CIFS Unix extensions, and will -be invisbile to Windows clients and typically will not affect local -applications running on the same server as Samba. - -Use instructions: -================ -Once the CIFS VFS support is built into the kernel or installed as a module -(cifs.ko), you can use mount syntax like the following to access Samba or -Mac or Windows servers: - - mount -t cifs //9.53.216.11/e$ /mnt -o username=myname,password=mypassword - -Before -o the option -v may be specified to make the mount.cifs -mount helper display the mount steps more verbosely. -After -o the following commonly used cifs vfs specific options -are supported: - - username=<username> - password=<password> - domain=<domain name> - -Other cifs mount options are described below. Use of TCP names (in addition to -ip addresses) is available if the mount helper (mount.cifs) is installed. If -you do not trust the server to which are mounted, or if you do not have -cifs signing enabled (and the physical network is insecure), consider use -of the standard mount options "noexec" and "nosuid" to reduce the risk of -running an altered binary on your local system (downloaded from a hostile server -or altered by a hostile router). - -Although mounting using format corresponding to the CIFS URL specification is -not possible in mount.cifs yet, it is possible to use an alternate format -for the server and sharename (which is somewhat similar to NFS style mount -syntax) instead of the more widely used UNC format (i.e. \\server\share): - mount -t cifs tcp_name_of_server:share_name /mnt -o user=myname,pass=mypasswd - -When using the mount helper mount.cifs, passwords may be specified via alternate -mechanisms, instead of specifying it after -o using the normal "pass=" syntax -on the command line: -1) By including it in a credential file. Specify credentials=filename as one -of the mount options. Credential files contain two lines - username=someuser - password=your_password -2) By specifying the password in the PASSWD environment variable (similarly -the user name can be taken from the USER environment variable). -3) By specifying the password in a file by name via PASSWD_FILE -4) By specifying the password in a file by file descriptor via PASSWD_FD - -If no password is provided, mount.cifs will prompt for password entry - -Restrictions -============ -Servers must support either "pure-TCP" (port 445 TCP/IP CIFS connections) or RFC -1001/1002 support for "Netbios-Over-TCP/IP." This is not likely to be a -problem as most servers support this. - -Valid filenames differ between Windows and Linux. Windows typically restricts -filenames which contain certain reserved characters (e.g.the character : -which is used to delimit the beginning of a stream name by Windows), while -Linux allows a slightly wider set of valid characters in filenames. Windows -servers can remap such characters when an explicit mapping is specified in -the Server's registry. Samba starting with version 3.10 will allow such -filenames (ie those which contain valid Linux characters, which normally -would be forbidden for Windows/CIFS semantics) as long as the server is -configured for Unix Extensions (and the client has not disabled -/proc/fs/cifs/LinuxExtensionsEnabled). In addition the mount option -"mapposix" can be used on CIFS (vers=1.0) to force the mapping of -illegal Windows/NTFS/SMB characters to a remap range (this mount parm -is the default for SMB3). This remap ("mapposix") range is also -compatible with Mac (and "Services for Mac" on some older Windows). - -CIFS VFS Mount Options -====================== -A partial list of the supported mount options follows: - username The user name to use when trying to establish - the CIFS session. - password The user password. If the mount helper is - installed, the user will be prompted for password - if not supplied. - ip The ip address of the target server - unc The target server Universal Network Name (export) to - mount. - domain Set the SMB/CIFS workgroup name prepended to the - username during CIFS session establishment - forceuid Set the default uid for inodes to the uid - passed in on mount. For mounts to servers - which do support the CIFS Unix extensions, such as a - properly configured Samba server, the server provides - the uid, gid and mode so this parameter should not be - specified unless the server and clients uid and gid - numbering differ. If the server and client are in the - same domain (e.g. running winbind or nss_ldap) and - the server supports the Unix Extensions then the uid - and gid can be retrieved from the server (and uid - and gid would not have to be specified on the mount. - For servers which do not support the CIFS Unix - extensions, the default uid (and gid) returned on lookup - of existing files will be the uid (gid) of the person - who executed the mount (root, except when mount.cifs - is configured setuid for user mounts) unless the "uid=" - (gid) mount option is specified. Also note that permission - checks (authorization checks) on accesses to a file occur - at the server, but there are cases in which an administrator - may want to restrict at the client as well. For those - servers which do not report a uid/gid owner - (such as Windows), permissions can also be checked at the - client, and a crude form of client side permission checking - can be enabled by specifying file_mode and dir_mode on - the client. (default) - forcegid (similar to above but for the groupid instead of uid) (default) - noforceuid Fill in file owner information (uid) by requesting it from - the server if possible. With this option, the value given in - the uid= option (on mount) will only be used if the server - can not support returning uids on inodes. - noforcegid (similar to above but for the group owner, gid, instead of uid) - uid Set the default uid for inodes, and indicate to the - cifs kernel driver which local user mounted. If the server - supports the unix extensions the default uid is - not used to fill in the owner fields of inodes (files) - unless the "forceuid" parameter is specified. - gid Set the default gid for inodes (similar to above). - file_mode If CIFS Unix extensions are not supported by the server - this overrides the default mode for file inodes. - fsc Enable local disk caching using FS-Cache (off by default). This - option could be useful to improve performance on a slow link, - heavily loaded server and/or network where reading from the - disk is faster than reading from the server (over the network). - This could also impact scalability positively as the - number of calls to the server are reduced. However, local - caching is not suitable for all workloads for e.g. read-once - type workloads. So, you need to consider carefully your - workload/scenario before using this option. Currently, local - disk caching is functional for CIFS files opened as read-only. - dir_mode If CIFS Unix extensions are not supported by the server - this overrides the default mode for directory inodes. - port attempt to contact the server on this tcp port, before - trying the usual ports (port 445, then 139). - iocharset Codepage used to convert local path names to and from - Unicode. Unicode is used by default for network path - names if the server supports it. If iocharset is - not specified then the nls_default specified - during the local client kernel build will be used. - If server does not support Unicode, this parameter is - unused. - rsize default read size (usually 16K). The client currently - can not use rsize larger than CIFSMaxBufSize. CIFSMaxBufSize - defaults to 16K and may be changed (from 8K to the maximum - kmalloc size allowed by your kernel) at module install time - for cifs.ko. Setting CIFSMaxBufSize to a very large value - will cause cifs to use more memory and may reduce performance - in some cases. To use rsize greater than 127K (the original - cifs protocol maximum) also requires that the server support - a new Unix Capability flag (for very large read) which some - newer servers (e.g. Samba 3.0.26 or later) do. rsize can be - set from a minimum of 2048 to a maximum of 130048 (127K or - CIFSMaxBufSize, whichever is smaller) - wsize default write size (default 57344) - maximum wsize currently allowed by CIFS is 57344 (fourteen - 4096 byte pages) - actimeo=n attribute cache timeout in seconds (default 1 second). - After this timeout, the cifs client requests fresh attribute - information from the server. This option allows to tune the - attribute cache timeout to suit the workload needs. Shorter - timeouts mean better the cache coherency, but increased number - of calls to the server. Longer timeouts mean reduced number - of calls to the server at the expense of less stricter cache - coherency checks (i.e. incorrect attribute cache for a short - period of time). - rw mount the network share read-write (note that the - server may still consider the share read-only) - ro mount network share read-only - version used to distinguish different versions of the - mount helper utility (not typically needed) - sep if first mount option (after the -o), overrides - the comma as the separator between the mount - parms. e.g. - -o user=myname,password=mypassword,domain=mydom - could be passed instead with period as the separator by - -o sep=.user=myname.password=mypassword.domain=mydom - this might be useful when comma is contained within username - or password or domain. This option is less important - when the cifs mount helper cifs.mount (version 1.1 or later) - is used. - nosuid Do not allow remote executables with the suid bit - program to be executed. This is only meaningful for mounts - to servers such as Samba which support the CIFS Unix Extensions. - If you do not trust the servers in your network (your mount - targets) it is recommended that you specify this option for - greater security. - exec Permit execution of binaries on the mount. - noexec Do not permit execution of binaries on the mount. - dev Recognize block devices on the remote mount. - nodev Do not recognize devices on the remote mount. - suid Allow remote files on this mountpoint with suid enabled to - be executed (default for mounts when executed as root, - nosuid is default for user mounts). - credentials Although ignored by the cifs kernel component, it is used by - the mount helper, mount.cifs. When mount.cifs is installed it - opens and reads the credential file specified in order - to obtain the userid and password arguments which are passed to - the cifs vfs. - guest Although ignored by the kernel component, the mount.cifs - mount helper will not prompt the user for a password - if guest is specified on the mount options. If no - password is specified a null password will be used. - perm Client does permission checks (vfs_permission check of uid - and gid of the file against the mode and desired operation), - Note that this is in addition to the normal ACL check on the - target machine done by the server software. - Client permission checking is enabled by default. - noperm Client does not do permission checks. This can expose - files on this mount to access by other users on the local - client system. It is typically only needed when the server - supports the CIFS Unix Extensions but the UIDs/GIDs on the - client and server system do not match closely enough to allow - access by the user doing the mount, but it may be useful with - non CIFS Unix Extension mounts for cases in which the default - mode is specified on the mount but is not to be enforced on the - client (e.g. perhaps when MultiUserMount is enabled) - Note that this does not affect the normal ACL check on the - target machine done by the server software (of the server - ACL against the user name provided at mount time). - serverino Use server's inode numbers instead of generating automatically - incrementing inode numbers on the client. Although this will - make it easier to spot hardlinked files (as they will have - the same inode numbers) and inode numbers may be persistent, - note that the server does not guarantee that the inode numbers - are unique if multiple server side mounts are exported under a - single share (since inode numbers on the servers might not - be unique if multiple filesystems are mounted under the same - shared higher level directory). Note that some older - (e.g. pre-Windows 2000) do not support returning UniqueIDs - or the CIFS Unix Extensions equivalent and for those - this mount option will have no effect. Exporting cifs mounts - under nfsd requires this mount option on the cifs mount. - This is now the default if server supports the - required network operation. - noserverino Client generates inode numbers (rather than using the actual one - from the server). These inode numbers will vary after - unmount or reboot which can confuse some applications, - but not all server filesystems support unique inode - numbers. - setuids If the CIFS Unix extensions are negotiated with the server - the client will attempt to set the effective uid and gid of - the local process on newly created files, directories, and - devices (create, mkdir, mknod). If the CIFS Unix Extensions - are not negotiated, for newly created files and directories - instead of using the default uid and gid specified on - the mount, cache the new file's uid and gid locally which means - that the uid for the file can change when the inode is - reloaded (or the user remounts the share). - nosetuids The client will not attempt to set the uid and gid on - on newly created files, directories, and devices (create, - mkdir, mknod) which will result in the server setting the - uid and gid to the default (usually the server uid of the - user who mounted the share). Letting the server (rather than - the client) set the uid and gid is the default. If the CIFS - Unix Extensions are not negotiated then the uid and gid for - new files will appear to be the uid (gid) of the mounter or the - uid (gid) parameter specified on the mount. - netbiosname When mounting to servers via port 139, specifies the RFC1001 - source name to use to represent the client netbios machine - name when doing the RFC1001 netbios session initialize. - direct Do not do inode data caching on files opened on this mount. - This precludes mmapping files on this mount. In some cases - with fast networks and little or no caching benefits on the - client (e.g. when the application is doing large sequential - reads bigger than page size without rereading the same data) - this can provide better performance than the default - behavior which caches reads (readahead) and writes - (writebehind) through the local Linux client pagecache - if oplock (caching token) is granted and held. Note that - direct allows write operations larger than page size - to be sent to the server. - strictcache Use for switching on strict cache mode. In this mode the - client read from the cache all the time it has Oplock Level II, - otherwise - read from the server. All written data are stored - in the cache, but if the client doesn't have Exclusive Oplock, - it writes the data to the server. - rwpidforward Forward pid of a process who opened a file to any read or write - operation on that file. This prevent applications like WINE - from failing on read and write if we use mandatory brlock style. - acl Allow setfacl and getfacl to manage posix ACLs if server - supports them. (default) - noacl Do not allow setfacl and getfacl calls on this mount - user_xattr Allow getting and setting user xattrs (those attributes whose - name begins with "user." or "os2.") as OS/2 EAs (extended - attributes) to the server. This allows support of the - setfattr and getfattr utilities. (default) - nouser_xattr Do not allow getfattr/setfattr to get/set/list xattrs - mapchars Translate six of the seven reserved characters (not backslash) - *?<>|: - to the remap range (above 0xF000), which also - allows the CIFS client to recognize files created with - such characters by Windows's POSIX emulation. This can - also be useful when mounting to most versions of Samba - (which also forbids creating and opening files - whose names contain any of these seven characters). - This has no effect if the server does not support - Unicode on the wire. - nomapchars Do not translate any of these seven characters (default). - nocase Request case insensitive path name matching (case - sensitive is the default if the server supports it). - (mount option "ignorecase" is identical to "nocase") - posixpaths If CIFS Unix extensions are supported, attempt to - negotiate posix path name support which allows certain - characters forbidden in typical CIFS filenames, without - requiring remapping. (default) - noposixpaths If CIFS Unix extensions are supported, do not request - posix path name support (this may cause servers to - reject creatingfile with certain reserved characters). - nounix Disable the CIFS Unix Extensions for this mount (tree - connection). This is rarely needed, but it may be useful - in order to turn off multiple settings all at once (ie - posix acls, posix locks, posix paths, symlink support - and retrieving uids/gids/mode from the server) or to - work around a bug in server which implement the Unix - Extensions. - nobrl Do not send byte range lock requests to the server. - This is necessary for certain applications that break - with cifs style mandatory byte range locks (and most - cifs servers do not yet support requesting advisory - byte range locks). - forcemandatorylock Even if the server supports posix (advisory) byte range - locking, send only mandatory lock requests. For some - (presumably rare) applications, originally coded for - DOS/Windows, which require Windows style mandatory byte range - locking, they may be able to take advantage of this option, - forcing the cifs client to only send mandatory locks - even if the cifs server would support posix advisory locks. - "forcemand" is accepted as a shorter form of this mount - option. - nostrictsync If this mount option is set, when an application does an - fsync call then the cifs client does not send an SMB Flush - to the server (to force the server to write all dirty data - for this file immediately to disk), although cifs still sends - all dirty (cached) file data to the server and waits for the - server to respond to the write. Since SMB Flush can be - very slow, and some servers may be reliable enough (to risk - delaying slightly flushing the data to disk on the server), - turning on this option may be useful to improve performance for - applications that fsync too much, at a small risk of server - crash. If this mount option is not set, by default cifs will - send an SMB flush request (and wait for a response) on every - fsync call. - nodfs Disable DFS (global name space support) even if the - server claims to support it. This can help work around - a problem with parsing of DFS paths with Samba server - versions 3.0.24 and 3.0.25. - remount remount the share (often used to change from ro to rw mounts - or vice versa) - cifsacl Report mode bits (e.g. on stat) based on the Windows ACL for - the file. (EXPERIMENTAL) - servern Specify the server 's netbios name (RFC1001 name) to use - when attempting to setup a session to the server. - This is needed for mounting to some older servers (such - as OS/2 or Windows 98 and Windows ME) since they do not - support a default server name. A server name can be up - to 15 characters long and is usually uppercased. - sfu When the CIFS Unix Extensions are not negotiated, attempt to - create device files and fifos in a format compatible with - Services for Unix (SFU). In addition retrieve bits 10-12 - of the mode via the SETFILEBITS extended attribute (as - SFU does). In the future the bottom 9 bits of the - mode also will be emulated using queries of the security - descriptor (ACL). - mfsymlinks Enable support for Minshall+French symlinks - (see http://wiki.samba.org/index.php/UNIX_Extensions#Minshall.2BFrench_symlinks) - This option is ignored when specified together with the - 'sfu' option. Minshall+French symlinks are used even if - the server supports the CIFS Unix Extensions. - sign Must use packet signing (helps avoid unwanted data modification - by intermediate systems in the route). Note that signing - does not work with lanman or plaintext authentication. - seal Must seal (encrypt) all data on this mounted share before - sending on the network. Requires support for Unix Extensions. - Note that this differs from the sign mount option in that it - causes encryption of data sent over this mounted share but other - shares mounted to the same server are unaffected. - locallease This option is rarely needed. Fcntl F_SETLEASE is - used by some applications such as Samba and NFSv4 server to - check to see whether a file is cacheable. CIFS has no way - to explicitly request a lease, but can check whether a file - is cacheable (oplocked). Unfortunately, even if a file - is not oplocked, it could still be cacheable (ie cifs client - could grant fcntl leases if no other local processes are using - the file) for cases for example such as when the server does not - support oplocks and the user is sure that the only updates to - the file will be from this client. Specifying this mount option - will allow the cifs client to check for leases (only) locally - for files which are not oplocked instead of denying leases - in that case. (EXPERIMENTAL) - sec Security mode. Allowed values are: - none attempt to connection as a null user (no name) - krb5 Use Kerberos version 5 authentication - krb5i Use Kerberos authentication and packet signing - ntlm Use NTLM password hashing (default) - ntlmi Use NTLM password hashing with signing (if - /proc/fs/cifs/PacketSigningEnabled on or if - server requires signing also can be the default) - ntlmv2 Use NTLMv2 password hashing - ntlmv2i Use NTLMv2 password hashing with packet signing - lanman (if configured in kernel config) use older - lanman hash -hard Retry file operations if server is not responding -soft Limit retries to unresponsive servers (usually only - one retry) before returning an error. (default) - -The mount.cifs mount helper also accepts a few mount options before -o -including: - - -S take password from stdin (equivalent to setting the environment - variable "PASSWD_FD=0" - -V print mount.cifs version - -? display simple usage information - -With most 2.6 kernel versions of modutils, the version of the cifs kernel -module can be displayed via modinfo. - -Misc /proc/fs/cifs Flags and Debug Info -======================================= -Informational pseudo-files: -DebugData Displays information about active CIFS sessions and - shares, features enabled as well as the cifs.ko - version. -Stats Lists summary resource usage information as well as per - share statistics. - -Configuration pseudo-files: -SecurityFlags Flags which control security negotiation and - also packet signing. Authentication (may/must) - flags (e.g. for NTLM and/or NTLMv2) may be combined with - the signing flags. Specifying two different password - hashing mechanisms (as "must use") on the other hand - does not make much sense. Default flags are - 0x07007 - (NTLM, NTLMv2 and packet signing allowed). The maximum - allowable flags if you want to allow mounts to servers - using weaker password hashes is 0x37037 (lanman, - plaintext, ntlm, ntlmv2, signing allowed). Some - SecurityFlags require the corresponding menuconfig - options to be enabled (lanman and plaintext require - CONFIG_CIFS_WEAK_PW_HASH for example). Enabling - plaintext authentication currently requires also - enabling lanman authentication in the security flags - because the cifs module only supports sending - laintext passwords using the older lanman dialect - form of the session setup SMB. (e.g. for authentication - using plain text passwords, set the SecurityFlags - to 0x30030): - - may use packet signing 0x00001 - must use packet signing 0x01001 - may use NTLM (most common password hash) 0x00002 - must use NTLM 0x02002 - may use NTLMv2 0x00004 - must use NTLMv2 0x04004 - may use Kerberos security 0x00008 - must use Kerberos 0x08008 - may use lanman (weak) password hash 0x00010 - must use lanman password hash 0x10010 - may use plaintext passwords 0x00020 - must use plaintext passwords 0x20020 - (reserved for future packet encryption) 0x00040 - -cifsFYI If set to non-zero value, additional debug information - will be logged to the system error log. This field - contains three flags controlling different classes of - debugging entries. The maximum value it can be set - to is 7 which enables all debugging points (default 0). - Some debugging statements are not compiled into the - cifs kernel unless CONFIG_CIFS_DEBUG2 is enabled in the - kernel configuration. cifsFYI may be set to one or - nore of the following flags (7 sets them all): - - log cifs informational messages 0x01 - log return codes from cifs entry points 0x02 - log slow responses (ie which take longer than 1 second) - CONFIG_CIFS_STATS2 must be enabled in .config 0x04 - - -traceSMB If set to one, debug information is logged to the - system error log with the start of smb requests - and responses (default 0) -LookupCacheEnable If set to one, inode information is kept cached - for one second improving performance of lookups - (default 1) -LinuxExtensionsEnabled If set to one then the client will attempt to - use the CIFS "UNIX" extensions which are optional - protocol enhancements that allow CIFS servers - to return accurate UID/GID information as well - as support symbolic links. If you use servers - such as Samba that support the CIFS Unix - extensions but do not want to use symbolic link - support and want to map the uid and gid fields - to values supplied at mount (rather than the - actual values, then set this to zero. (default 1) - -These experimental features and tracing can be enabled by changing flags in -/proc/fs/cifs (after the cifs module has been installed or built into the -kernel, e.g. insmod cifs). To enable a feature set it to 1 e.g. to enable -tracing to the kernel message log type: - - echo 7 > /proc/fs/cifs/cifsFYI - -cifsFYI functions as a bit mask. Setting it to 1 enables additional kernel -logging of various informational messages. 2 enables logging of non-zero -SMB return codes while 4 enables logging of requests that take longer -than one second to complete (except for byte range lock requests). -Setting it to 4 requires CONFIG_CIFS_STATS2 to be set in kernel configuration -(.config). Setting it to seven enables all three. Finally, tracing -the start of smb requests and responses can be enabled via: - - echo 1 > /proc/fs/cifs/traceSMB - -Per share (per client mount) statistics are available in /proc/fs/cifs/Stats. -Additional information is available if CONFIG_CIFS_STATS2 is enabled in the -kernel configuration (.config). The statistics returned include counters which -represent the number of attempted and failed (ie non-zero return code from the -server) SMB3 (or cifs) requests grouped by request type (read, write, close etc.). -Also recorded is the total bytes read and bytes written to the server for -that share. Note that due to client caching effects this can be less than the -number of bytes read and written by the application running on the client. -Statistics can be reset to zero by "echo 0 > /proc/fs/cifs/Stats" which may be -useful if comparing performance of two different scenarios. - -Also note that "cat /proc/fs/cifs/DebugData" will display information about -the active sessions and the shares that are mounted. - -Enabling Kerberos (extended security) works but requires version 1.2 or later -of the helper program cifs.upcall to be present and to be configured in the -/etc/request-key.conf file. The cifs.upcall helper program is from the Samba -project(http://www.samba.org). NTLM and NTLMv2 and LANMAN support do not -require this helper. Note that NTLMv2 security (which does not require the -cifs.upcall helper program), instead of using Kerberos, is sufficient for -some use cases. - -DFS support allows transparent redirection to shares in an MS-DFS name space. -In addition, DFS support for target shares which are specified as UNC -names which begin with host names (rather than IP addresses) requires -a user space helper (such as cifs.upcall) to be present in order to -translate host names to ip address, and the user space helper must also -be configured in the file /etc/request-key.conf. Samba, Windows servers and -many NAS appliances support DFS as a way of constructing a global name -space to ease network configuration and improve reliability. - -To use cifs Kerberos and DFS support, the Linux keyutils package should be -installed and something like the following lines should be added to the -/etc/request-key.conf file: - -create cifs.spnego * * /usr/local/sbin/cifs.upcall %k -create dns_resolver * * /usr/local/sbin/cifs.upcall %k - -CIFS kernel module parameters -============================= -These module parameters can be specified or modified either during the time of -module loading or during the runtime by using the interface - /proc/module/cifs/parameters/<param> - -i.e. echo "value" > /sys/module/cifs/parameters/<param> - -1. enable_oplocks - Enable or disable oplocks. Oplocks are enabled by default. - [Y/y/1]. To disable use any of [N/n/0]. - diff --git a/Documentation/filesystems/cifs/TODO b/Documentation/filesystems/cifs/TODO deleted file mode 100644 index 9267f3fb131f..000000000000 --- a/Documentation/filesystems/cifs/TODO +++ /dev/null @@ -1,119 +0,0 @@ -Version 2.14 December 21, 2018 - -A Partial List of Missing Features -================================== - -Contributions are welcome. There are plenty of opportunities -for visible, important contributions to this module. Here -is a partial list of the known problems and missing features: - -a) SMB3 (and SMB3.1.1) missing optional features: - - multichannel (started), integration with RDMA - - directory leases (improved metadata caching), started (root dir only) - - T10 copy offload ie "ODX" (copy chunk, and "Duplicate Extents" ioctl - currently the only two server side copy mechanisms supported) - -b) improved sparse file support - -c) Directory entry caching relies on a 1 second timer, rather than -using Directory Leases, currently only the root file handle is cached longer - -d) quota support (needs minor kernel change since quota calls -to make it to network filesystems or deviceless filesystems) - -e) Additional use cases where we use "compoounding" (e.g. open/query/close -and open/setinfo/close) to reduce the number of roundtrips, and also -open to reduce redundant opens (using deferred close and reference counts more). - -f) Finish inotify support so kde and gnome file list windows -will autorefresh (partially complete by Asser). Needs minor kernel -vfs change to support removing D_NOTIFY on a file. - -g) Add GUI tool to configure /proc/fs/cifs settings and for display of -the CIFS statistics (started) - -h) implement support for security and trusted categories of xattrs -(requires minor protocol extension) to enable better support for SELINUX - -i) Add support for tree connect contexts (see MS-SMB2) a new SMB3.1.1 protocol - feature (may be especially useful for virtualization). - -j) Create UID mapping facility so server UIDs can be mapped on a per -mount or a per server basis to client UIDs or nobody if no mapping -exists. Also better integration with winbind for resolving SID owners - -k) Add tools to take advantage of more smb3 specific ioctls and features -(passthrough ioctl/fsctl for sending various SMB3 fsctls to the server -is in progress, and a passthrough query_info call is already implemented -in cifs.ko to allow smb3 info levels queries to be sent from userspace) - -l) encrypted file support - -m) improved stats gathering tools (perhaps integration with nfsometer?) -to extend and make easier to use what is currently in /proc/fs/cifs/Stats - -n) allow setting more NTFS/SMB3 file attributes remotely (currently limited to compressed -file attribute via chflags) and improve user space tools for managing and -viewing them. - -o) mount helper GUI (to simplify the various configuration options on mount) - -p) Add support for witness protocol (perhaps ioctl to cifs.ko from user space - tool listening on witness protocol RPC) to allow for notification of share - move, server failover, and server adapter changes. And also improve other - failover scenarios, e.g. when client knows multiple DFS entries point to - different servers, and the server we are connected to has gone down. - -q) Allow mount.cifs to be more verbose in reporting errors with dialect -or unsupported feature errors. - -r) updating cifs documentation, and user guide. - -s) Addressing bugs found by running a broader set of xfstests in standard -file system xfstest suite. - -t) split cifs and smb3 support into separate modules so legacy (and less -secure) CIFS dialect can be disabled in environments that don't need it -and simplify the code. - -v) POSIX Extensions for SMB3.1.1 (started, create and mkdir support added -so far). - -w) Add support for additional strong encryption types, and additional spnego -authentication mechanisms (see MS-SMB2) - -KNOWN BUGS -==================================== -See http://bugzilla.samba.org - search on product "CifsVFS" for -current bug list. Also check http://bugzilla.kernel.org (Product = File System, Component = CIFS) - -1) existing symbolic links (Windows reparse points) are recognized but -can not be created remotely. They are implemented for Samba and those that -support the CIFS Unix extensions, although earlier versions of Samba -overly restrict the pathnames. -2) follow_link and readdir code does not follow dfs junctions -but recognizes them - -Misc testing to do -================== -1) check out max path names and max path name components against various server -types. Try nested symlinks (8 deep). Return max path name in stat -f information - -2) Improve xfstest's cifs/smb3 enablement and adapt xfstests where needed to test -cifs/smb3 better - -3) Additional performance testing and optimization using iozone and similar - -there are some easy changes that can be done to parallelize sequential writes, -and when signing is disabled to request larger read sizes (larger than -negotiated size) and send larger write sizes to modern servers. - -4) More exhaustively test against less common servers - -5) Continue to extend the smb3 "buildbot" which does automated xfstesting -against Windows, Samba and Azure currently - to add additional tests and -to allow the buildbot to execute the tests faster. The URL for the -buildbot is: http://smb3-test-rhel-75.southcentralus.cloudapp.azure.com - -6) Address various coverity warnings (most are not bugs per-se, but -the more warnings are addressed, the easier it is to spot real -problems that static analyzers will point out in the future). diff --git a/Documentation/filesystems/cifs/cifs.txt b/Documentation/filesystems/cifs/cifs.txt deleted file mode 100644 index 1be3d21c286e..000000000000 --- a/Documentation/filesystems/cifs/cifs.txt +++ /dev/null @@ -1,45 +0,0 @@ - This is the client VFS module for the SMB3 NAS protocol as well - as for older dialects such as the Common Internet File System (CIFS) - protocol which was the successor to the Server Message Block - (SMB) protocol, the native file sharing mechanism for most early - PC operating systems. New and improved versions of CIFS are now - called SMB2 and SMB3. Use of SMB3 (and later, including SMB3.1.1) - is strongly preferred over using older dialects like CIFS due to - security reaasons. All modern dialects, including the most recent, - SMB3.1.1 are supported by the CIFS VFS module. The SMB3 protocol - is implemented and supported by all major file servers - such as all modern versions of Windows (including Windows 2016 - Server), as well as by Samba (which provides excellent - CIFS/SMB2/SMB3 server support and tools for Linux and many other - operating systems). Apple systems also support SMB3 well, as - do most Network Attached Storage vendors, so this network - filesystem client can mount to a wide variety of systems. - It also supports mounting to the cloud (for example - Microsoft Azure), including the necessary security features. - - The intent of this module is to provide the most advanced network - file system function for SMB3 compliant servers, including advanced - security features, excellent parallelized high performance i/o, better - POSIX compliance, secure per-user session establishment, encryption, - high performance safe distributed caching (leases/oplocks), optional packet - signing, large files, Unicode support and other internationalization - improvements. Since both Samba server and this filesystem client support - the CIFS Unix extensions (and in the future SMB3 POSIX extensions), - the combination can provide a reasonable alternative to other network and - cluster file systems for fileserving in some Linux to Linux environments, - not just in Linux to Windows (or Linux to Mac) environments. - - This filesystem has a mount utility (mount.cifs) and various user space - tools (including smbinfo and setcifsacl) that can be obtained from - - https://git.samba.org/?p=cifs-utils.git - or - git://git.samba.org/cifs-utils.git - - mount.cifs should be installed in the directory with the other mount helpers. - - For more information on the module see the project wiki page at - - https://wiki.samba.org/index.php/LinuxCIFS - and - https://wiki.samba.org/index.php/LinuxCIFS_utils diff --git a/Documentation/filesystems/cifs/winucase_convert.pl b/Documentation/filesystems/cifs/winucase_convert.pl deleted file mode 100755 index 322a9c833f23..000000000000 --- a/Documentation/filesystems/cifs/winucase_convert.pl +++ /dev/null @@ -1,62 +0,0 @@ -#!/usr/bin/perl -w -# -# winucase_convert.pl -- convert "Windows 8 Upper Case Mapping Table.txt" to -# a two-level set of C arrays. -# -# Copyright 2013: Jeff Layton <jlayton@redhat.com> -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -while(<>) { - next if (!/^0x(..)(..)\t0x(....)\t/); - $firstchar = hex($1); - $secondchar = hex($2); - $uppercase = hex($3); - - $top[$firstchar][$secondchar] = $uppercase; -} - -for ($i = 0; $i < 256; $i++) { - next if (!$top[$i]); - - printf("static const wchar_t t2_%2.2x[256] = {", $i); - for ($j = 0; $j < 256; $j++) { - if (($j % 8) == 0) { - print "\n\t"; - } else { - print " "; - } - printf("0x%4.4x,", $top[$i][$j] ? $top[$i][$j] : 0); - } - print "\n};\n\n"; -} - -printf("static const wchar_t *const toplevel[256] = {", $i); -for ($i = 0; $i < 256; $i++) { - if (($i % 8) == 0) { - print "\n\t"; - } elsif ($top[$i]) { - print " "; - } else { - print " "; - } - - if ($top[$i]) { - printf("t2_%2.2x,", $i); - } else { - print "NULL,"; - } -} -print "\n};\n\n"; |