diff options
Diffstat (limited to 'Documentation/hwmon/ina3221.rst')
| -rw-r--r-- | Documentation/hwmon/ina3221.rst | 49 |
1 files changed, 49 insertions, 0 deletions
diff --git a/Documentation/hwmon/ina3221.rst b/Documentation/hwmon/ina3221.rst new file mode 100644 index 000000000000..1e34abb38b59 --- /dev/null +++ b/Documentation/hwmon/ina3221.rst @@ -0,0 +1,49 @@ +Kernel driver ina3221 +===================== + +Supported chips: + + * Texas Instruments INA3221 + + Prefix: 'ina3221' + + Addresses: I2C 0x40 - 0x43 + + Datasheet: Publicly available at the Texas Instruments website + + http://www.ti.com/ + +Author: Andrew F. Davis <afd@ti.com> + +Description +----------- + +The Texas Instruments INA3221 monitors voltage, current, and power on the high +side of up to three D.C. power supplies. The INA3221 monitors both shunt drop +and supply voltage, with programmable conversion times and averaging, current +and power are calculated host-side from these. + +Sysfs entries +------------- + +======================= ======================================================= +in[123]_label Voltage channel labels +in[123]_enable Voltage channel enable controls +in[123]_input Bus voltage(mV) channels +curr[123]_input Current(mA) measurement channels +shunt[123]_resistor Shunt resistance(uOhm) channels +curr[123]_crit Critical alert current(mA) setting, activates the + corresponding alarm when the respective current + is above this value +curr[123]_crit_alarm Critical alert current limit exceeded +curr[123]_max Warning alert current(mA) setting, activates the + corresponding alarm when the respective current + average is above this value. +curr[123]_max_alarm Warning alert current limit exceeded +in[456]_input Shunt voltage(uV) for channels 1, 2, and 3 respectively +samples Number of samples using in the averaging mode. + + Supports the list of number of samples: + + 1, 4, 16, 64, 128, 256, 512, 1024 +======================= ======================================================= |