diff options
Diffstat (limited to 'Documentation/hwmon/via686a')
-rw-r--r-- | Documentation/hwmon/via686a | 30 |
1 files changed, 18 insertions, 12 deletions
diff --git a/Documentation/hwmon/via686a b/Documentation/hwmon/via686a index e5f90ab5c48d..a343c35df740 100644 --- a/Documentation/hwmon/via686a +++ b/Documentation/hwmon/via686a @@ -2,29 +2,35 @@ Kernel driver via686a ===================== Supported chips: + * Via VT82C686A, VT82C686B Southbridge Integrated Hardware Monitor + Prefix: 'via686a' + Addresses scanned: ISA in PCI-space encoded address + Datasheet: On request through web form (http://www.via.com.tw/en/resources/download-center/) Authors: - Kyösti Mälkki <kmalkki@cc.hut.fi>, - Mark D. Studebaker <mdsxyz123@yahoo.com> - Bob Dougherty <bobd@stanford.edu> - (Some conversion-factor data were contributed by - Jonathan Teh Soon Yew <j.teh@iname.com> - and Alex van Kaam <darkside@chello.nl>.) + - Kyösti Mälkki <kmalkki@cc.hut.fi>, + - Mark D. Studebaker <mdsxyz123@yahoo.com> + - Bob Dougherty <bobd@stanford.edu> + - (Some conversion-factor data were contributed by + - Jonathan Teh Soon Yew <j.teh@iname.com> + - and Alex van Kaam <darkside@chello.nl>.) Module Parameters ----------------- +======================= ======================================================= force_addr=0xaddr Set the I/O base address. Useful for boards that - don't set the address in the BIOS. Look for a BIOS - upgrade before resorting to this. Does not do a - PCI force; the via686a must still be present in lspci. - Don't use this unless the driver complains that the - base address is not set. - Example: 'modprobe via686a force_addr=0x6000' + don't set the address in the BIOS. Look for a BIOS + upgrade before resorting to this. Does not do a + PCI force; the via686a must still be present in lspci. + Don't use this unless the driver complains that the + base address is not set. + Example: 'modprobe via686a force_addr=0x6000' +======================= ======================================================= Description ----------- |