diff options
Diffstat (limited to 'Documentation/maintainer')
| -rw-r--r-- | Documentation/maintainer/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/maintainer/rebasing-and-merging.rst | 226 |
2 files changed, 227 insertions, 0 deletions
diff --git a/Documentation/maintainer/index.rst b/Documentation/maintainer/index.rst index 2a14916930cb..56e2c09dfa39 100644 --- a/Documentation/maintainer/index.rst +++ b/Documentation/maintainer/index.rst @@ -10,5 +10,6 @@ additions to this manual. :maxdepth: 2 configure-git + rebasing-and-merging pull-requests diff --git a/Documentation/maintainer/rebasing-and-merging.rst b/Documentation/maintainer/rebasing-and-merging.rst new file mode 100644 index 000000000000..09f988e7fa71 --- /dev/null +++ b/Documentation/maintainer/rebasing-and-merging.rst @@ -0,0 +1,226 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +Rebasing and merging +==================== + +Maintaining a subsystem, as a general rule, requires a familiarity with the +Git source-code management system. Git is a powerful tool with a lot of +features; as is often the case with such tools, there are right and wrong +ways to use those features. This document looks in particular at the use +of rebasing and merging. Maintainers often get in trouble when they use +those tools incorrectly, but avoiding problems is not actually all that +hard. + +One thing to be aware of in general is that, unlike many other projects, +the kernel community is not scared by seeing merge commits in its +development history. Indeed, given the scale of the project, avoiding +merges would be nearly impossible. Some problems encountered by +maintainers result from a desire to avoid merges, while others come from +merging a little too often. + +Rebasing +======== + +"Rebasing" is the process of changing the history of a series of commits +within a repository. There are two different types of operations that are +referred to as rebasing since both are done with the ``git rebase`` +command, but there are significant differences between them: + + - Changing the parent (starting) commit upon which a series of patches is + built. For example, a rebase operation could take a patch set built on + the previous kernel release and base it, instead, on the current + release. We'll call this operation "reparenting" in the discussion + below. + + - Changing the history of a set of patches by fixing (or deleting) broken + commits, adding patches, adding tags to commit changelogs, or changing + the order in which commits are applied. In the following text, this + type of operation will be referred to as "history modification" + +The term "rebasing" will be used to refer to both of the above operations. +Used properly, rebasing can yield a cleaner and clearer development +history; used improperly, it can obscure that history and introduce bugs. + +There are a few rules of thumb that can help developers to avoid the worst +perils of rebasing: + + - History that has been exposed to the world beyond your private system + should usually not be changed. Others may have pulled a copy of your + tree and built on it; modifying your tree will create pain for them. If + work is in need of rebasing, that is usually a sign that it is not yet + ready to be committed to a public repository. + + That said, there are always exceptions. Some trees (linux-next being + a significant example) are frequently rebased by their nature, and + developers know not to base work on them. Developers will sometimes + expose an unstable branch for others to test with or for automated + testing services. If you do expose a branch that may be unstable in + this way, be sure that prospective users know not to base work on it. + + - Do not rebase a branch that contains history created by others. If you + have pulled changes from another developer's repository, you are now a + custodian of their history. You should not change it. With few + exceptions, for example, a broken commit in a tree like this should be + explicitly reverted rather than disappeared via history modification. + + - Do not reparent a tree without a good reason to do so. Just being on a + newer base or avoiding a merge with an upstream repository is not + generally a good reason. + + - If you must reparent a repository, do not pick some random kernel commit + as the new base. The kernel is often in a relatively unstable state + between release points; basing development on one of those points + increases the chances of running into surprising bugs. When a patch + series must move to a new base, pick a stable point (such as one of + the -rc releases) to move to. + + - Realize that reparenting a patch series (or making significant history + modifications) changes the environment in which it was developed and, + likely, invalidates much of the testing that was done. A reparented + patch series should, as a general rule, be treated like new code and + retested from the beginning. + +A frequent cause of merge-window trouble is when Linus is presented with a +patch series that has clearly been reparented, often to a random commit, +shortly before the pull request was sent. The chances of such a series +having been adequately tested are relatively low - as are the chances of +the pull request being acted upon. + +If, instead, rebasing is limited to private trees, commits are based on a +well-known starting point, and they are well tested, the potential for +trouble is low. + +Merging +======= + +Merging is a common operation in the kernel development process; the 5.1 +development cycle included 1,126 merge commits - nearly 9% of the total. +Kernel work is accumulated in over 100 different subsystem trees, each of +which may contain multiple topic branches; each branch is usually developed +independently of the others. So naturally, at least one merge will be +required before any given branch finds its way into an upstream repository. + +Many projects require that branches in pull requests be based on the +current trunk so that no merge commits appear in the history. The kernel +is not such a project; any rebasing of branches to avoid merges will, most +likely, lead to trouble. + +Subsystem maintainers find themselves having to do two types of merges: +from lower-level subsystem trees and from others, either sibling trees or +the mainline. The best practices to follow differ in those two situations. + +Merging from lower-level trees +------------------------------ + +Larger subsystems tend to have multiple levels of maintainers, with the +lower-level maintainers sending pull requests to the higher levels. Acting +on such a pull request will almost certainly generate a merge commit; that +is as it should be. In fact, subsystem maintainers may want to use +the --no-ff flag to force the addition of a merge commit in the rare cases +where one would not normally be created so that the reasons for the merge +can be recorded. The changelog for the merge should, for any kind of +merge, say *why* the merge is being done. For a lower-level tree, "why" is +usually a summary of the changes that will come with that pull. + +Maintainers at all levels should be using signed tags on their pull +requests, and upstream maintainers should verify the tags when pulling +branches. Failure to do so threatens the security of the development +process as a whole. + +As per the rules outlined above, once you have merged somebody else's +history into your tree, you cannot rebase that branch, even if you +otherwise would be able to. + +Merging from sibling or upstream trees +-------------------------------------- + +While merges from downstream are common and unremarkable, merges from other +trees tend to be a red flag when it comes time to push a branch upstream. +Such merges need to be carefully thought about and well justified, or +there's a good chance that a subsequent pull request will be rejected. + +It is natural to want to merge the master branch into a repository; this +type of merge is often called a "back merge". Back merges can help to make +sure that there are no conflicts with parallel development and generally +gives a warm, fuzzy feeling of being up-to-date. But this temptation +should be avoided almost all of the time. + +Why is that? Back merges will muddy the development history of your own +branch. They will significantly increase your chances of encountering bugs +from elsewhere in the community and make it hard to ensure that the work +you are managing is stable and ready for upstream. Frequent merges can +also obscure problems with the development process in your tree; they can +hide interactions with other trees that should not be happening (often) in +a well-managed branch. + +That said, back merges are occasionally required; when that happens, be +sure to document *why* it was required in the commit message. As always, +merge to a well-known stable point, rather than to some random commit. +Even then, you should not back merge a tree above your immediate upstream +tree; if a higher-level back merge is really required, the upstream tree +should do it first. + +One of the most frequent causes of merge-related trouble is when a +maintainer merges with the upstream in order to resolve merge conflicts +before sending a pull request. Again, this temptation is easy enough to +understand, but it should absolutely be avoided. This is especially true +for the final pull request: Linus is adamant that he would much rather see +merge conflicts than unnecessary back merges. Seeing the conflicts lets +him know where potential problem areas are. He does a lot of merges (382 +in the 5.1 development cycle) and has gotten quite good at conflict +resolution - often better than the developers involved. + +So what should a maintainer do when there is a conflict between their +subsystem branch and the mainline? The most important step is to warn +Linus in the pull request that the conflict will happen; if nothing else, +that demonstrates an awareness of how your branch fits into the whole. For +especially difficult conflicts, create and push a *separate* branch to show +how you would resolve things. Mention that branch in your pull request, +but the pull request itself should be for the unmerged branch. + +Even in the absence of known conflicts, doing a test merge before sending a +pull request is a good idea. It may alert you to problems that you somehow +didn't see from linux-next and helps to understand exactly what you are +asking upstream to do. + +Another reason for doing merges of upstream or another subsystem tree is to +resolve dependencies. These dependency issues do happen at times, and +sometimes a cross-merge with another tree is the best way to resolve them; +as always, in such situations, the merge commit should explain why the +merge has been done. Take a moment to do it right; people will read those +changelogs. + +Often, though, dependency issues indicate that a change of approach is +needed. Merging another subsystem tree to resolve a dependency risks +bringing in other bugs and should almost never be done. If that subsystem +tree fails to be pulled upstream, whatever problems it had will block the +merging of your tree as well. Preferable alternatives include agreeing +with the maintainer to carry both sets of changes in one of the trees or +creating a topic branch dedicated to the prerequisite commits that can be +merged into both trees. If the dependency is related to major +infrastructural changes, the right solution might be to hold the dependent +commits for one development cycle so that those changes have time to +stabilize in the mainline. + +Finally +======= + +It is relatively common to merge with the mainline toward the beginning of +the development cycle in order to pick up changes and fixes done elsewhere +in the tree. As always, such a merge should pick a well-known release +point rather than some random spot. If your upstream-bound branch has +emptied entirely into the mainline during the merge window, you can pull it +forward with a command like:: + + git merge v5.2-rc1^0 + +The "^0" will cause Git to do a fast-forward merge (which should be +possible in this situation), thus avoiding the addition of a spurious merge +commit. + +The guidelines laid out above are just that: guidelines. There will always +be situations that call out for a different solution, and these guidelines +should not prevent developers from doing the right thing when the need +arises. But one should always think about whether the need has truly +arisen and be prepared to explain why something abnormal needs to be done. |