diff options
Diffstat (limited to 'Documentation/scsi/cpqfc.txt')
| -rw-r--r-- | Documentation/scsi/cpqfc.txt | 272 |
1 files changed, 272 insertions, 0 deletions
diff --git a/Documentation/scsi/cpqfc.txt b/Documentation/scsi/cpqfc.txt new file mode 100644 index 000000000000..dd33e61c0645 --- /dev/null +++ b/Documentation/scsi/cpqfc.txt @@ -0,0 +1,272 @@ +Notes for CPQFCTS driver for Compaq Tachyon TS +Fibre Channel Host Bus Adapter, PCI 64-bit, 66MHz +for Linux (RH 6.1, 6.2 kernel 2.2.12-32, 2.2.14-5) +SMP tested +Tested in single and dual HBA configuration, 32 and 64bit busses, +33 and 66MHz. Only supports FC-AL. +SEST size 512 Exchanges (simultaneous I/Os) limited by module kmalloc() + max of 128k bytes contiguous. + +Ver 2.5.4 Oct 03, 2002 + * fixed memcpy of sense buffer in ioctl to copy the smaller defined size +Ver 2.5.3 Aug 01, 2002 + * fix the passthru ioctl to handle the Scsi_Cmnd->request being a pointer +Ver 2.5.1 Jul 30, 2002 + * fix ioctl to pay attention to the specified LUN. +Ver 2.5.0 Nov 29, 2001 + * eliminated io_request_lock. This change makes the driver specific + to the 2.5.x kernels. + * silenced excessively noisy printks. + +Ver 2.1.2 July 23, 2002 + * initialize DumCmnd->lun in cpqfcTS_ioctl (used in fcFindLoggedInPorts as LUN index) + +Ver 2.1.1 Oct 18, 2001 + * reinitialize Cmnd->SCp.sent_command (used to identify commands as + passthrus) on calling scsi_done, since the scsi mid layer does not + use (or reinitialize) this field to prevent subsequent comands from + having it set incorrectly. + +Ver 2.1.0 Aug 27, 2001 + * Revise driver to use new kernel 2.4.x PCI DMA API, instead of + virt_to_bus(). (enables driver to work w/ ia64 systems with >2Gb RAM.) + Rework main scatter-gather code to handle cases where SG element + lengths are larger than 0x7FFFF bytes and use as many scatter + gather pages as necessary. (Steve Cameron) + * Makefile changes to bring cpqfc into line w/ rest of SCSI drivers + (thanks to Keith Owens) + +Ver 2.0.5 Aug 06, 2001 + * Reject non-existent luns in the driver rather than letting the + hardware do it. (some HW behaves differently than others in this area.) + * Changed Makefile to rely on "make dep" instead of explicit dependencies + * ifdef'ed out fibre channel analyzer triggering debug code + * fixed a jiffies wrapping issue + +Ver 2.0.4 Aug 01, 2001 + * Incorporated fix for target device reset from Steeleye + * Fixed passthrough ioctl so it doesn't hang. + * Fixed hang in launch_FCworker_thread() that occurred on some machines. + * Avoid problem when number of volumes in a single cabinet > 8 + +Ver 2.0.2 July 23, 2001 + Changed the semiphore changes so the driver would compile in 2.4.7. + This version is for 2.4.7 and beyond. + +Ver 2.0.1 May 7, 2001 + Merged version 1.3.6 fixes into version 2.0.0. + +Ver 2.0.0 May 7, 2001 + Fixed problem so spinlock is being initialized to UNLOCKED. + Fixed updated driver so it compiles in the 2.4 tree. + + Ver 1.3.6 Feb 27, 2001 + Added Target_Device_Reset function for SCSI error handling + Fixed problem with not reseting addressing mode after implicit logout + + +Ver 1.3.4 Sep 7, 2000 + Added Modinfo information + Fixed problem with statically linking the driver + +Ver 1.3.3, Aug 23, 2000 + Fixed device/function number in ioctl + +Ver 1.3.2, July 27, 2000 + Add include for Alpha compile on 2.2.14 kernel (cpq*i2c.c) + Change logic for different FCP-RSP sense_buffer location for HSG80 target + And search for Agilent Tachyon XL2 HBAs (not finished! - in test) + +Tested with +(storage): + Compaq RA-4x000, RAID firmware ver 2.40 - 2.54 + Seagate FC drives model ST39102FC, rev 0006 + Hitachi DK31CJ-72FC rev J8A8 + IBM DDYF-T18350R rev F60K + Compaq FC-SCSI bridge w/ DLT 35/70 Gb DLT (tape) +(servers): + Compaq PL-1850R + Compaq PL-6500 Xeon (400MHz) + Compaq PL-8500 (500MHz, 66MHz, 64bit PCI) + Compaq Alpha DS20 (RH 6.1) +(hubs): + Vixel Rapport 1000 (7-port "dumb") + Gadzoox Gibralter (12-port "dumb") + Gadzoox Capellix 2000, 3000 +(switches): + Brocade 2010, 2400, 2800, rev 2.0.3a (& later) + Gadzoox 3210 (Fabric blade beta) + Vixel 7100 (Fabric beta firmare - known hot plug issues) +using "qa_test" (esp. io_test script) suite modified from Unix tests. + +Installation: +make menuconfig + (select SCSI low-level, Compaq FC HBA) +make modules +make modules_install + +e.g. insmod -f cpqfc + +Due to Fabric/switch delays, driver requires 4 seconds +to initialize. If adapters are found, there will be a entries at +/proc/scsi/cpqfcTS/* + +sample contents of startup messages + +************************* + scsi_register allocating 3596 bytes for CPQFCHBA + ioremap'd Membase: c887e600 + HBA Tachyon RevId 1.2 +Allocating 119808 for 576 Exchanges @ c0dc0000 +Allocating 112904 for LinkQ @ c0c20000 (576 elements) +Allocating 110600 for TachSEST for 512 Exchanges + cpqfcTS: writing IMQ BASE 7C0000h PI 7C4000h + cpqfcTS: SEST c0e40000(virt): Wrote base E40000h @ c887e740 +cpqfcTS: New FC port 0000E8h WWN: 500507650642499D SCSI Chan/Trgt 0/0 +cpqfcTS: New FC port 0000EFh WWN: 50000E100000D5A6 SCSI Chan/Trgt 0/1 +cpqfcTS: New FC port 0000E4h WWN: 21000020370097BB SCSI Chan/Trgt 0/2 +cpqfcTS: New FC port 0000E2h WWN: 2100002037009946 SCSI Chan/Trgt 0/3 +cpqfcTS: New FC port 0000E1h WWN: 21000020370098FE SCSI Chan/Trgt 0/4 +cpqfcTS: New FC port 0000E0h WWN: 21000020370097B2 SCSI Chan/Trgt 0/5 +cpqfcTS: New FC port 0000DCh WWN: 2100002037006CC1 SCSI Chan/Trgt 0/6 +cpqfcTS: New FC port 0000DAh WWN: 21000020370059F6 SCSI Chan/Trgt 0/7 +cpqfcTS: New FC port 00000Fh WWN: 500805F1FADB0E20 SCSI Chan/Trgt 0/8 +cpqfcTS: New FC port 000008h WWN: 500805F1FADB0EBA SCSI Chan/Trgt 0/9 +cpqfcTS: New FC port 000004h WWN: 500805F1FADB1EB9 SCSI Chan/Trgt 0/10 +cpqfcTS: New FC port 000002h WWN: 500805F1FADB1ADE SCSI Chan/Trgt 0/11 +cpqfcTS: New FC port 000001h WWN: 500805F1FADBA2CA SCSI Chan/Trgt 0/12 +scsi4 : Compaq FibreChannel HBA Tachyon TS HPFC-5166A/1.2: WWN 500508B200193F50 + on PCI bus 0 device 0xa0fc irq 5 IObaseL 0x3400, MEMBASE 0xc6ef8600 +PCI bus width 32 bits, bus speed 33 MHz +FCP-SCSI Driver v1.3.0 +GBIC detected: Short-wave. LPSM 0h Monitor +scsi : 5 hosts. + Vendor: IBM Model: DDYF-T18350R Rev: F60K + Type: Direct-Access ANSI SCSI revision: 03 +Detected scsi disk sdb at scsi4, channel 0, id 0, lun 0 + Vendor: HITACHI Model: DK31CJ-72FC Rev: J8A8 + Type: Direct-Access ANSI SCSI revision: 02 +Detected scsi disk sdc at scsi4, channel 0, id 1, lun 0 + Vendor: SEAGATE Model: ST39102FC Rev: 0006 + Type: Direct-Access ANSI SCSI revision: 02 +Detected scsi disk sdd at scsi4, channel 0, id 2, lun 0 + Vendor: SEAGATE Model: ST39102FC Rev: 0006 + Type: Direct-Access ANSI SCSI revision: 02 +Detected scsi disk sde at scsi4, channel 0, id 3, lun 0 + Vendor: SEAGATE Model: ST39102FC Rev: 0006 + Type: Direct-Access ANSI SCSI revision: 02 +Detected scsi disk sdf at scsi4, channel 0, id 4, lun 0 + Vendor: SEAGATE Model: ST39102FC Rev: 0006 + Type: Direct-Access ANSI SCSI revision: 02 +Detected scsi disk sdg at scsi4, channel 0, id 5, lun 0 + Vendor: SEAGATE Model: ST39102FC Rev: 0006 + Type: Direct-Access ANSI SCSI revision: 02 +Detected scsi disk sdh at scsi4, channel 0, id 6, lun 0 + Vendor: SEAGATE Model: ST39102FC Rev: 0006 + Type: Direct-Access ANSI SCSI revision: 02 +Detected scsi disk sdi at scsi4, channel 0, id 7, lun 0 + Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.48 + Type: Direct-Access ANSI SCSI revision: 02 +Detected scsi disk sdj at scsi4, channel 0, id 8, lun 0 + Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.48 + Type: Direct-Access ANSI SCSI revision: 02 +Detected scsi disk sdk at scsi4, channel 0, id 8, lun 1 + Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.40 + Type: Direct-Access ANSI SCSI revision: 02 +Detected scsi disk sdl at scsi4, channel 0, id 9, lun 0 + Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.40 + Type: Direct-Access ANSI SCSI revision: 02 +Detected scsi disk sdm at scsi4, channel 0, id 9, lun 1 + Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.54 + Type: Direct-Access ANSI SCSI revision: 02 +Detected scsi disk sdn at scsi4, channel 0, id 10, lun 0 + Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.54 + Type: Direct-Access ANSI SCSI revision: 02 +Detected scsi disk sdo at scsi4, channel 0, id 11, lun 0 + Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.54 + Type: Direct-Access ANSI SCSI revision: 02 +Detected scsi disk sdp at scsi4, channel 0, id 11, lun 1 + Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.54 + Type: Direct-Access ANSI SCSI revision: 02 +Detected scsi disk sdq at scsi4, channel 0, id 12, lun 0 + Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.54 + Type: Direct-Access ANSI SCSI revision: 02 +Detected scsi disk sdr at scsi4, channel 0, id 12, lun 1 +resize_dma_pool: unknown device type 12 +resize_dma_pool: unknown device type 12 +SCSI device sdb: hdwr sector= 512 bytes. Sectors= 35843670 [17501 MB] [17.5 GB] + sdb: sdb1 +SCSI device sdc: hdwr sector= 512 bytes. Sectors= 144410880 [70513 MB] [70.5 GB] + sdc: sdc1 +SCSI device sdd: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] + sdd: sdd1 +SCSI device sde: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] + sde: sde1 +SCSI device sdf: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] + sdf: sdf1 +SCSI device sdg: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] + sdg: sdg1 +SCSI device sdh: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] + sdh: sdh1 +SCSI device sdi: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] + sdi: sdi1 +SCSI device sdj: hdwr sector= 512 bytes. Sectors= 2056160 [1003 MB] [1.0 GB] + sdj: sdj1 +SCSI device sdk: hdwr sector= 512 bytes. Sectors= 2052736 [1002 MB] [1.0 GB] + sdk: sdk1 +SCSI device sdl: hdwr sector= 512 bytes. Sectors= 17764320 [8673 MB] [8.7 GB] + sdl: sdl1 +SCSI device sdm: hdwr sector= 512 bytes. Sectors= 8380320 [4091 MB] [4.1 GB] + sdm: sdm1 +SCSI device sdn: hdwr sector= 512 bytes. Sectors= 17764320 [8673 MB] [8.7 GB] + sdn: sdn1 +SCSI device sdo: hdwr sector= 512 bytes. Sectors= 17764320 [8673 MB] [8.7 GB] + sdo: sdo1 +SCSI device sdp: hdwr sector= 512 bytes. Sectors= 17764320 [8673 MB] [8.7 GB] + sdp: sdp1 +SCSI device sdq: hdwr sector= 512 bytes. Sectors= 2056160 [1003 MB] [1.0 GB] + sdq: sdq1 +SCSI device sdr: hdwr sector= 512 bytes. Sectors= 2052736 [1002 MB] [1.0 GB] + sdr: sdr1 + +************************* + +If a GBIC of type Short-wave, Long-wave, or Copper is detected, it will +print out; otherwise, "none" is displayed. If the cabling is correct +and a loop circuit is completed, you should see "Monitor"; otherwise, +"LoopFail" (on open circuit) or some LPSM number/state with bit 3 set. + + +ERRATA: +1. Normally, Linux Scsi queries FC devices with INQUIRY strings. All LUNs +found according to INQUIRY should get READ commands at sector 0 to find +partition table, etc. Older kernels only query the first 4 devices. Some +Linux kernels only look for one LUN per target (i.e. FC device). + +2. Physically removing a device, or a malfunctioning system which hides a +device, leads to a 30-second timeout and subsequent _abort call. +In some process contexts, this will hang the kernel (crashing the system). +Single bit errors in frames and virtually all hot plugging events are +gracefully handled with internal driver timer and Abort processing. + +3. Some SCSI drives with error conditions will not handle the 7 second timeout +in this software driver, leading to infinite retries on timed out SCSI commands. +The 7 secs balances the need to quickly recover from lost frames (esp. on sequence +initiatives) and time needed by older/slower/error-state drives in responding. +This can be easily changed in "Exchanges[].timeOut". + +4. Due to the nature of FC soft addressing, there is no assurance that the +same LUNs (drives) will have the same path (e.g. /dev/sdb1) from one boot to +next. Dynamic soft address changes (i.e. 24-bit FC port_id) are +supported during run time (e.g. due to hot plug event) by the use of WWN to +SCSI Nexus (channel/target/LUN) mapping. + +5. Compaq RA4x00 firmware version 2.54 and later supports SSP (Selective +Storage Presentation), which maps LUNs to a WWN. If RA4x00 firmware prior +2.54 (e.g. older controller) is used, or the FC HBA is replaced (another WWN +is used), logical volumes on the RA4x00 will no longer be visible. + + +Send questions/comments to: +Amy Vanzant-Hodge (fibrechannel@compaq.com) + |