aboutsummaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/mfd/mc13xxx.txt78
-rw-r--r--Documentation/devicetree/bindings/mfd/twl-familly.txt47
2 files changed, 125 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
new file mode 100644
index 000000000000..19f6af47a792
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
@@ -0,0 +1,78 @@
+* Freescale MC13783/MC13892 Power Management Integrated Circuit (PMIC)
+
+Required properties:
+- compatible : Should be "fsl,mc13783" or "fsl,mc13892"
+
+Optional properties:
+- fsl,mc13xxx-uses-adc : Indicate the ADC is being used
+- fsl,mc13xxx-uses-codec : Indicate the Audio Codec is being used
+- fsl,mc13xxx-uses-rtc : Indicate the RTC is being used
+- fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
+
+Sub-nodes:
+- regulators : Contain the regulator nodes. The MC13892 regulators are
+ bound using their names as listed below with their registers and bits
+ for enabling.
+
+ vcoincell : regulator VCOINCELL (register 13, bit 23)
+ sw1 : regulator SW1 (register 24, bit 0)
+ sw2 : regulator SW2 (register 25, bit 0)
+ sw3 : regulator SW3 (register 26, bit 0)
+ sw4 : regulator SW4 (register 27, bit 0)
+ swbst : regulator SWBST (register 29, bit 20)
+ vgen1 : regulator VGEN1 (register 32, bit 0)
+ viohi : regulator VIOHI (register 32, bit 3)
+ vdig : regulator VDIG (register 32, bit 9)
+ vgen2 : regulator VGEN2 (register 32, bit 12)
+ vpll : regulator VPLL (register 32, bit 15)
+ vusb2 : regulator VUSB2 (register 32, bit 18)
+ vgen3 : regulator VGEN3 (register 33, bit 0)
+ vcam : regulator VCAM (register 33, bit 6)
+ vvideo : regulator VVIDEO (register 33, bit 12)
+ vaudio : regulator VAUDIO (register 33, bit 15)
+ vsd : regulator VSD (register 33, bit 18)
+ gpo1 : regulator GPO1 (register 34, bit 6)
+ gpo2 : regulator GPO2 (register 34, bit 8)
+ gpo3 : regulator GPO3 (register 34, bit 10)
+ gpo4 : regulator GPO4 (register 34, bit 12)
+ pwgt1spi : regulator PWGT1SPI (register 34, bit 15)
+ pwgt2spi : regulator PWGT2SPI (register 34, bit 16)
+ vusb : regulator VUSB (register 50, bit 3)
+
+ The bindings details of individual regulator device can be found in:
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+Examples:
+
+ecspi@70010000 { /* ECSPI1 */
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
+ <&gpio3 25 0>; /* GPIO4_25 */
+ status = "okay";
+
+ pmic: mc13892@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mc13892";
+ spi-max-frequency = <6000000>;
+ reg = <0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <8>;
+
+ regulators {
+ sw1_reg: mc13892__sw1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: mc13892__sw2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/mfd/twl-familly.txt b/Documentation/devicetree/bindings/mfd/twl-familly.txt
new file mode 100644
index 000000000000..a66fcf946759
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/twl-familly.txt
@@ -0,0 +1,47 @@
+Texas Instruments TWL family
+
+The TWLs are Integrated Power Management Chips.
+Some version might contain much more analog function like
+USB transceiver or Audio amplifier.
+These chips are connected to an i2c bus.
+
+
+Required properties:
+- compatible : Must be "ti,twl4030";
+ For Integrated power-management/audio CODEC device used in OMAP3
+ based boards
+- compatible : Must be "ti,twl6030";
+ For Integrated power-management used in OMAP4 based boards
+- interrupts : This i2c device has an IRQ line connected to the main SoC
+- interrupt-controller : Since the twl support several interrupts internally,
+ it is considered as an interrupt controller cascaded to the SoC one.
+- #interrupt-cells = <1>;
+- interrupt-parent : The parent interrupt controller.
+
+Optional node:
+- Child nodes contain in the twl. The twl family is made of several variants
+ that support a different number of features.
+ The children nodes will thus depend of the capability of the variant.
+
+
+Example:
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+twl@48 {
+ compatible = "ti,twl6030";
+ reg = <0x48>;
+ interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ twl_rtc {
+ compatible = "ti,twl_rtc";
+ interrupts = <11>;
+ reg = <0>;
+ };
+};