diff options
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/ABI/testing/sysfs-class-led | 17 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/leds/common.txt | 28 | ||||
-rw-r--r-- | Documentation/leds/leds-class.txt | 15 |
3 files changed, 50 insertions, 10 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led index 491cdeedc195..5f67f7ab277b 100644 --- a/Documentation/ABI/testing/sysfs-class-led +++ b/Documentation/ABI/testing/sysfs-class-led @@ -23,6 +23,23 @@ Description: If the LED does not support different brightness levels, this should be 1. +What: /sys/class/leds/<led>/brightness_hw_changed +Date: January 2017 +KernelVersion: 4.11 +Description: + Last hardware set brightness level for this LED. Some LEDs + may be changed autonomously by hardware/firmware. Only LEDs + where this happens and the driver can detect this, will have + this file. + + This file supports poll() to detect when the hardware changes + the brightness. + + Reading this file will return the last brightness level set + by the hardware, this may be different from the current + brightness. Reading this file when no hw brightness change + event has happened will return an ENODATA error. + What: /sys/class/leds/<led>/trigger Date: March 2006 KernelVersion: 2.6.17 diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt index 696be5792625..24b656014089 100644 --- a/Documentation/devicetree/bindings/leds/common.txt +++ b/Documentation/devicetree/bindings/leds/common.txt @@ -61,16 +61,24 @@ property can be omitted. Examples: -system-status { - label = "Status"; - linux,default-trigger = "heartbeat"; - ... +gpio-leds { + compatible = "gpio-leds"; + + system-status { + label = "Status"; + linux,default-trigger = "heartbeat"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; }; -camera-flash { - label = "Flash"; - led-sources = <0>, <1>; - led-max-microamp = <50000>; - flash-max-microamp = <320000>; - flash-max-timeout-us = <500000>; +max77693-led { + compatible = "maxim,max77693-led"; + + camera-flash { + label = "Flash"; + led-sources = <0>, <1>; + led-max-microamp = <50000>; + flash-max-microamp = <320000>; + flash-max-timeout-us = <500000>; + }; }; diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt index f1f7ec9f5cc5..836cb16d6f09 100644 --- a/Documentation/leds/leds-class.txt +++ b/Documentation/leds/leds-class.txt @@ -65,6 +65,21 @@ LED subsystem core exposes following API for setting brightness: blinking, returns -EBUSY if software blink fallback is enabled. +LED registration API +==================== + +A driver wanting to register a LED classdev for use by other drivers / +userspace needs to allocate and fill a led_classdev struct and then call +[devm_]led_classdev_register. If the non devm version is used the driver +must call led_classdev_unregister from its remove function before +free-ing the led_classdev struct. + +If the driver can detect hardware initiated brightness changes and thus +wants to have a brightness_hw_changed attribute then the LED_BRIGHT_HW_CHANGED +flag must be set in flags before registering. Calling +led_classdev_notify_brightness_hw_changed on a classdev not registered with +the LED_BRIGHT_HW_CHANGED flag is a bug and will trigger a WARN_ON. + Hardware accelerated blink of LEDs ================================== |