diff options
Diffstat (limited to 'Documentation')
46 files changed, 3388 insertions, 1004 deletions
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml new file mode 100644 index 000000000000..86057d541065 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml @@ -0,0 +1,291 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-backend.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Display Engine Backend Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The display engine backend exposes layers and sprites to the system. + +properties: + compatible: + enum: + - allwinner,sun4i-a10-display-backend + - allwinner,sun5i-a13-display-backend + - allwinner,sun6i-a31-display-backend + - allwinner,sun7i-a20-display-backend + - allwinner,sun8i-a23-display-backend + - allwinner,sun8i-a33-display-backend + - allwinner,sun9i-a80-display-backend + + reg: + minItems: 1 + maxItems: 2 + items: + - description: Display Backend registers + - description: SAT registers + + reg-names: + minItems: 1 + maxItems: 2 + items: + - const: be + - const: sat + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 4 + items: + - description: The backend interface clock + - description: The backend module clock + - description: The backend DRAM clock + - description: The SAT clock + + clock-names: + minItems: 3 + maxItems: 4 + items: + - const: ahb + - const: mod + - const: ram + - const: sat + + resets: + minItems: 1 + maxItems: 2 + items: + - description: The Backend reset line + - description: The SAT reset line + + reset-names: + minItems: 1 + maxItems: 2 + items: + - const: be + - const: sat + + # FIXME: This should be made required eventually once every SoC will + # have the MBUS declared. + interconnects: + maxItems: 1 + + # FIXME: This should be made required eventually once every SoC will + # have the MBUS declared. + interconnect-names: + const: dma-mem + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +if: + properties: + compatible: + contains: + const: allwinner,sun8i-a33-display-backend + +then: + properties: + reg: + minItems: 2 + + reg-names: + minItems: 2 + + clocks: + minItems: 4 + + clock-names: + minItems: 4 + + resets: + minItems: 2 + + reset-names: + minItems: 2 + + required: + - reg-names + - reset-names + +else: + properties: + reg: + maxItems: 1 + + reg-names: + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + maxItems: 3 + + resets: + maxItems: 1 + + reset-names: + maxItems: 1 + +examples: + - | + /* + * This comes from the clock/sun4i-a10-ccu.h and + * reset/sun4i-a10-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_AHB_DE_BE0 42 + #define CLK_DRAM_DE_BE0 140 + #define CLK_DE_BE0 144 + #define RST_DE_BE0 5 + + display-backend@1e60000 { + compatible = "allwinner,sun4i-a10-display-backend"; + reg = <0x01e60000 0x10000>; + interrupts = <47>; + clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, + <&ccu CLK_DRAM_DE_BE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_BE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be0>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_be0>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_be0>; + }; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun8i-a23-a33-ccu.h and + * reset/sun8i-a23-a33-ccu.h headers, but we can't include them + * since it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_BUS_DE_BE 40 + #define CLK_BUS_SAT 46 + #define CLK_DRAM_DE_BE 84 + #define CLK_DE_BE 85 + #define RST_BUS_DE_BE 21 + #define RST_BUS_SAT 27 + + display-backend@1e60000 { + compatible = "allwinner,sun8i-a33-display-backend"; + reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>; + reg-names = "be", "sat"; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>; + clock-names = "ahb", "mod", + "ram", "sat"; + resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>; + reset-names = "be", "sat"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&fe0_out_be0>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&drc0_in_be0>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml new file mode 100644 index 000000000000..944ff2f1cf93 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Display Engine Pipeline Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The display engine pipeline (and its entry point, since it can be + either directly the backend or the frontend) is represented as an + extra node. + + The Allwinner A10 Display pipeline is composed of several components + that are going to be documented below: + + For all connections between components up to the TCONs in the + display pipeline, when there are multiple components of the same + type at the same depth, the local endpoint ID must be the same as + the remote component's index. For example, if the remote endpoint is + Frontend 1, then the local endpoint ID must be 1. + + Frontend 0 [0] ------- [0] Backend 0 [0] ------- [0] TCON 0 + [1] -- -- [1] [1] -- -- [1] + \ / \ / + X X + / \ / \ + [0] -- -- [0] [0] -- -- [0] + Frontend 1 [1] ------- [1] Backend 1 [1] ------- [1] TCON 1 + + For a two pipeline system such as the one depicted above, the lines + represent the connections between the components, while the numbers + within the square brackets corresponds to the ID of the local endpoint. + + The same rule also applies to DE 2.0 mixer-TCON connections: + + Mixer 0 [0] ----------- [0] TCON 0 + [1] ---- ---- [1] + \ / + X + / \ + [0] ---- ---- [0] + Mixer 1 [1] ----------- [1] TCON 1 + +properties: + compatible: + enum: + - allwinner,sun4i-a10-display-engine + - allwinner,sun5i-a10s-display-engine + - allwinner,sun5i-a13-display-engine + - allwinner,sun6i-a31-display-engine + - allwinner,sun6i-a31s-display-engine + - allwinner,sun7i-a20-display-engine + - allwinner,sun8i-a23-display-engine + - allwinner,sun8i-a33-display-engine + - allwinner,sun8i-a83t-display-engine + - allwinner,sun8i-h3-display-engine + - allwinner,sun8i-r40-display-engine + - allwinner,sun8i-v3s-display-engine + - allwinner,sun9i-a80-display-engine + - allwinner,sun50i-a64-display-engine + - allwinner,sun50i-h6-display-engine + + allwinner,pipelines: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle-array + - minItems: 1 + maxItems: 2 + description: | + Available display engine frontends (DE 1.0) or mixers (DE + 2.0/3.0) available. + +required: + - compatible + - allwinner,pipelines + +additionalProperties: false + +if: + properties: + compatible: + contains: + enum: + - allwinner,sun4i-a10-display-engine + - allwinner,sun6i-a31-display-engine + - allwinner,sun6i-a31s-display-engine + - allwinner,sun7i-a20-display-engine + - allwinner,sun8i-a83t-display-engine + - allwinner,sun8i-r40-display-engine + - allwinner,sun9i-a80-display-engine + - allwinner,sun50i-a64-display-engine + +then: + properties: + allwinner,pipelines: + minItems: 2 + +else: + properties: + allwinner,pipelines: + maxItems: 1 + +examples: + - | + de: display-engine { + compatible = "allwinner,sun4i-a10-display-engine"; + allwinner,pipelines = <&fe0>, <&fe1>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml new file mode 100644 index 000000000000..3eb1c2bbf4e7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-frontend.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Display Engine Frontend Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The display engine frontend does formats conversion, scaling, + deinterlacing and color space conversion. + +properties: + compatible: + enum: + - allwinner,sun4i-a10-display-frontend + - allwinner,sun5i-a13-display-frontend + - allwinner,sun6i-a31-display-frontend + - allwinner,sun7i-a20-display-frontend + - allwinner,sun8i-a23-display-frontend + - allwinner,sun8i-a33-display-frontend + - allwinner,sun9i-a80-display-frontend + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The frontend interface clock + - description: The frontend module clock + - description: The frontend DRAM clock + + clock-names: + items: + - const: ahb + - const: mod + - const: ram + + # FIXME: This should be made required eventually once every SoC will + # have the MBUS declared. + interconnects: + maxItems: 1 + + # FIXME: This should be made required eventually once every SoC will + # have the MBUS declared. + interconnect-names: + const: dma-mem + + resets: + maxItems: 1 + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. + + required: + - "#address-cells" + - "#size-cells" + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun4i-a10-ccu.h> + #include <dt-bindings/reset/sun4i-a10-ccu.h> + + fe0: display-frontend@1e00000 { + compatible = "allwinner,sun4i-a10-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = <47>; + clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>, + <&ccu CLK_DRAM_DE_FE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_FE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + + fe0_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe0>; + }; + }; + }; + }; + + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml new file mode 100644 index 000000000000..5d4915aed1e2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 HDMI Controller Device Tree Bindings + +description: | + The HDMI Encoder supports the HDMI video and audio outputs, and does + CEC. It is one end of the pipeline. + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + oneOf: + - const: allwinner,sun4i-a10-hdmi + - const: allwinner,sun5i-a10s-hdmi + - const: allwinner,sun6i-a31-hdmi + - items: + - const: allwinner,sun7i-a20-hdmi + - const: allwinner,sun5i-a10s-hdmi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + oneOf: + - items: + - description: The HDMI interface clock + - description: The HDMI module clock + - description: The first video PLL + - description: The second video PLL + + - items: + - description: The HDMI interface clock + - description: The HDMI module clock + - description: The HDMI DDC clock + - description: The first video PLL + - description: The second video PLL + + clock-names: + oneOf: + - items: + - const: ahb + - const: mod + - const: pll-0 + - const: pll-1 + + - items: + - const: ahb + - const: mod + - const: ddc + - const: pll-0 + - const: pll-1 + + resets: + maxItems: 1 + + dmas: + items: + - description: DDC Transmission DMA Channel + - description: DDC Reception DMA Channel + - description: Audio Transmission DMA Channel + + dma-names: + items: + - const: ddc-tx + - const: ddc-rx + - const: audio-tx + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. Usually an HDMI + connector. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-hdmi + +then: + properties: + clocks: + minItems: 5 + + clock-names: + minItems: 5 + + required: + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun4i-a10-ccu.h> + #include <dt-bindings/dma/sun4i-a10.h> + #include <dt-bindings/reset/sun4i-a10-ccu.h> + + hdmi: hdmi@1c16000 { + compatible = "allwinner,sun4i-a10-hdmi"; + reg = <0x01c16000 0x1000>; + interrupts = <58>; + clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>, + <&ccu CLK_PLL_VIDEO0_2X>, + <&ccu CLK_PLL_VIDEO1_2X>; + clock-names = "ahb", "mod", "pll-0", "pll-1"; + dmas = <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_DEDICATED 24>; + dma-names = "ddc-tx", "ddc-rx", "audio-tx"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hdmi_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_hdmi>; + }; + + hdmi_in_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml new file mode 100644 index 000000000000..86ad617d2327 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -0,0 +1,676 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tcon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Timings Controller (TCON) Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The TCON acts as a timing controller for RGB, LVDS and TV + interfaces. + +properties: + "#clock-cells": + const: 0 + + compatible: + oneOf: + - const: allwinner,sun4i-a10-tcon + - const: allwinner,sun5i-a13-tcon + - const: allwinner,sun6i-a31-tcon + - const: allwinner,sun6i-a31s-tcon + - const: allwinner,sun7i-a20-tcon + - const: allwinner,sun8i-a23-tcon + - const: allwinner,sun8i-a33-tcon + - const: allwinner,sun8i-a83t-tcon-lcd + - const: allwinner,sun8i-a83t-tcon-tv + - const: allwinner,sun8i-r40-tcon-tv + - const: allwinner,sun8i-v3s-tcon + - const: allwinner,sun9i-a80-tcon-lcd + - const: allwinner,sun9i-a80-tcon-tv + + - items: + - enum: + - allwinner,sun50i-a64-tcon-lcd + - const: allwinner,sun8i-a83t-tcon-lcd + + - items: + - enum: + - allwinner,sun8i-h3-tcon-tv + - allwinner,sun50i-a64-tcon-tv + - allwinner,sun50i-h6-tcon-tv + - const: allwinner,sun8i-a83t-tcon-tv + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + + clock-output-names: + allOf: + - $ref: /schemas/types.yaml#/definitions/string-array + - maxItems: 1 + description: + Name of the LCD pixel clock created. + + dmas: + maxItems: 1 + + resets: + anyOf: + - items: + - description: TCON Reset Line + + - items: + - description: TCON Reset Line + - description: TCON LVDS Reset Line + + - items: + - description: TCON Reset Line + - description: TCON eDP Reset Line + + - items: + - description: TCON Reset Line + - description: TCON eDP Reset Line + - description: TCON LVDS Reset Line + + reset-names: + oneOf: + - const: lcd + + - items: + - const: lcd + - const: lvds + + - items: + - const: lcd + - const: edp + + - items: + - const: lcd + - const: edp + - const: lvds + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. + + patternProperties: + "^endpoint(@[0-9])$": + type: object + + properties: + allwinner,tcon-channel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + TCON can have 1 or 2 channels, usually with the + first channel being used for the panels interfaces + (RGB, LVDS, etc.), and the second being used for the + outputs that require another controller (TV Encoder, + HDMI, etc.). + + If that property is present, specifies the TCON + channel the endpoint is associated to. If that + property is not present, the endpoint number will be + used as the channel number. + + unevaluatedProperties: true + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun4i-a10-tcon + - allwinner,sun5i-a13-tcon + - allwinner,sun7i-a20-tcon + + then: + properties: + clocks: + minItems: 3 + + clock-names: + items: + - const: ahb + - const: tcon-ch0 + - const: tcon-ch1 + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun6i-a31-tcon + - allwinner,sun6i-a31s-tcon + + then: + properties: + clocks: + minItems: 4 + + clock-names: + items: + - const: ahb + - const: tcon-ch0 + - const: tcon-ch1 + - const: lvds-alt + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a23-tcon + - allwinner,sun8i-a33-tcon + + then: + properties: + clocks: + minItems: 3 + + clock-names: + items: + - const: ahb + - const: tcon-ch0 + - const: lvds-alt + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a83t-tcon-lcd + - allwinner,sun8i-v3s-tcon + - allwinner,sun9i-a80-tcon-lcd + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: ahb + - const: tcon-ch0 + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a83t-tcon-tv + - allwinner,sun8i-r40-tcon-tv + - allwinner,sun9i-a80-tcon-tv + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: ahb + - const: tcon-ch1 + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun5i-a13-tcon + - allwinner,sun6i-a31-tcon + - allwinner,sun6i-a31s-tcon + - allwinner,sun7i-a20-tcon + - allwinner,sun8i-a23-tcon + - allwinner,sun8i-a33-tcon + - allwinner,sun8i-v3s-tcon + - allwinner,sun9i-a80-tcon-lcd + - allwinner,sun4i-a10-tcon + - allwinner,sun8i-a83t-tcon-lcd + + then: + required: + - "#clock-cells" + - clock-output-names + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun6i-a31-tcon + - allwinner,sun6i-a31s-tcon + - allwinner,sun8i-a23-tcon + - allwinner,sun8i-a33-tcon + - allwinner,sun8i-a83t-tcon-lcd + + then: + properties: + resets: + minItems: 2 + + reset-names: + items: + - const: lcd + - const: lvds + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun9i-a80-tcon-lcd + + then: + properties: + resets: + minItems: 3 + + reset-names: + items: + - const: lcd + - const: edp + - const: lvds + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun9i-a80-tcon-tv + + then: + properties: + resets: + minItems: 2 + + reset-names: + items: + - const: lcd + - const: edp + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun4i-a10-tcon + - allwinner,sun5i-a13-tcon + - allwinner,sun6i-a31-tcon + - allwinner,sun6i-a31s-tcon + - allwinner,sun7i-a20-tcon + - allwinner,sun8i-a23-tcon + - allwinner,sun8i-a33-tcon + + then: + required: + - dmas + +examples: + - | + #include <dt-bindings/dma/sun4i-a10.h> + + /* + * This comes from the clock/sun4i-a10-ccu.h and + * reset/sun4i-a10-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_AHB_LCD0 56 + #define CLK_TCON0_CH0 149 + #define CLK_TCON0_CH1 155 + #define RST_TCON0 11 + + lcd-controller@1c0c000 { + compatible = "allwinner,sun4i-a10-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <44>; + resets = <&ccu RST_TCON0>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB_LCD0>, + <&ccu CLK_TCON0_CH0>, + <&ccu CLK_TCON0_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; + dmas = <&dma SUN4I_DMA_DEDICATED 14>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon0>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_out_tcon0>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + #undef CLK_AHB_LCD0 + #undef CLK_TCON0_CH0 + #undef CLK_TCON0_CH1 + #undef RST_TCON0 + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun6i-a31-ccu.h and + * reset/sun6i-a31-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_PLL_MIPI 15 + #define CLK_AHB1_LCD0 47 + #define CLK_LCD0_CH0 127 + #define CLK_LCD0_CH1 129 + #define RST_AHB1_LCD0 27 + #define RST_AHB1_LVDS 41 + + lcd-controller@1c0c000 { + compatible = "allwinner,sun6i-a31-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 11>; + resets = <&ccu RST_AHB1_LCD0>, <&ccu RST_AHB1_LVDS>; + reset-names = "lcd", "lvds"; + clocks = <&ccu CLK_AHB1_LCD0>, + <&ccu CLK_LCD0_CH0>, + <&ccu CLK_LCD0_CH1>, + <&ccu CLK_PLL_MIPI>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1", + "lvds-alt"; + clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_out_tcon0>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&drc1_out_tcon0>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + #undef CLK_PLL_MIPI + #undef CLK_AHB1_LCD0 + #undef CLK_LCD0_CH0 + #undef CLK_LCD0_CH1 + #undef RST_AHB1_LCD0 + #undef RST_AHB1_LVDS + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun9i-a80-ccu.h and + * reset/sun9i-a80-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_BUS_LCD0 102 + #define CLK_LCD0 58 + #define RST_BUS_LCD0 22 + #define RST_BUS_EDP 24 + #define RST_BUS_LVDS 25 + + lcd-controller@3c00000 { + compatible = "allwinner,sun9i-a80-tcon-lcd"; + reg = <0x03c00000 0x10000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>; + clock-names = "ahb", "tcon-ch0"; + resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>, <&ccu RST_BUS_LVDS>; + reset-names = "lcd", "edp", "lvds"; + clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&drc0_out_tcon0>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + + #undef CLK_BUS_TCON0 + #undef CLK_TCON0 + #undef RST_BUS_TCON0 + #undef RST_BUS_EDP + #undef RST_BUS_LVDS + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun8i-a83t-ccu.h and + * reset/sun8i-a83t-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_BUS_TCON0 36 + #define CLK_TCON0 85 + #define RST_BUS_TCON0 22 + #define RST_BUS_LVDS 31 + + lcd-controller@1c0c000 { + compatible = "allwinner,sun8i-a83t-tcon-lcd"; + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; + clock-names = "ahb", "tcon-ch0"; + clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; + resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; + reset-names = "lcd", "lvds"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon0>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon0>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + + #undef CLK_BUS_TCON0 + #undef CLK_TCON0 + #undef RST_BUS_TCON0 + #undef RST_BUS_LVDS + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun8i-r40-ccu.h and + * reset/sun8i-r40-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_BUS_TCON_TV0 73 + #define RST_BUS_TCON_TV0 49 + + tcon_tv0: lcd-controller@1c73000 { + compatible = "allwinner,sun8i-r40-tcon-tv"; + reg = <0x01c73000 0x1000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_TCON_TV0>; + reset-names = "lcd"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>; + }; + }; + + tcon_tv0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>; + }; + }; + }; + }; + + #undef CLK_BUS_TCON_TV0 + #undef RST_BUS_TCON_TV0 + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml new file mode 100644 index 000000000000..5d5d39665119 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tv-encoder.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 TV Encoder Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + const: allwinner,sun4i-a10-tv-encoder + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + port: + type: object + description: + A port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. The + first port should be the input endpoint, usually coming from the + associated TCON. + +required: + - compatible + - reg + - clocks + - resets + - port + +additionalProperties: false + +examples: + - | + tve0: tv-encoder@1c0a000 { + compatible = "allwinner,sun4i-a10-tv-encoder"; + reg = <0x01c0a000 0x1000>; + clocks = <&ahb_gates 34>; + resets = <&tcon_ch0_clk 0>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + tve0_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_tve0>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml new file mode 100644 index 000000000000..0c1ce55940e1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-drc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 Dynamic Range Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The DRC (Dynamic Range Controller) allows to dynamically adjust + pixel brightness/contrast based on histogram measurements for LCD + content adaptive backlight control. + +properties: + compatible: + enum: + - allwinner,sun6i-a31-drc + - allwinner,sun6i-a31s-drc + - allwinner,sun8i-a23-drc + - allwinner,sun8i-a33-drc + - allwinner,sun9i-a80-drc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The DRC interface clock + - description: The DRC module clock + - description: The DRC DRAM clock + + clock-names: + items: + - const: ahb + - const: mod + - const: ram + + resets: + maxItems: 1 + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + #include <dt-bindings/clock/sun6i-a31-ccu.h> + #include <dt-bindings/reset/sun6i-a31-ccu.h> + + drc0: drc@1e70000 { + compatible = "allwinner,sun6i-a31-drc"; + reg = <0x01e70000 0x10000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>, + <&ccu CLK_DRAM_DRC0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_DRC0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc0_in: port@0 { + reg = <0>; + + drc0_in_be0: endpoint { + remote-endpoint = <&be0_out_drc0>; + }; + }; + + drc0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_drc0>; + }; + + drc0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_drc0>; + }; + }; + }; + }; + + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml index 0f7074977c04..9e90c2b00960 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml @@ -15,7 +15,9 @@ properties: "#size-cells": true compatible: - const: allwinner,sun6i-a31-mipi-dsi + enum: + - allwinner,sun6i-a31-mipi-dsi + - allwinner,sun50i-a64-mipi-dsi reg: maxItems: 1 @@ -24,6 +26,8 @@ properties: maxItems: 1 clocks: + minItems: 1 + maxItems: 2 items: - description: Bus Clock - description: Module Clock @@ -63,13 +67,38 @@ required: - reg - interrupts - clocks - - clock-names - phys - phy-names - resets - vcc-dsi-supply - port +allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-mipi-dsi + + then: + properties: + clocks: + minItems: 2 + + required: + - clock-names + + - if: + properties: + compatible: + contains: + const: allwinner,sun50i-a64-mipi-dsi + + then: + properties: + clocks: + minItems: 1 + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml new file mode 100644 index 000000000000..1dee641e3ea1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-de2-mixer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner Display Engine 2.0 Mixer Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + enum: + - allwinner,sun8i-a83t-de2-mixer-0 + - allwinner,sun8i-a83t-de2-mixer-1 + - allwinner,sun8i-h3-de2-mixer-0 + - allwinner,sun8i-r40-de2-mixer-0 + - allwinner,sun8i-r40-de2-mixer-1 + - allwinner,sun8i-v3s-de2-mixer + - allwinner,sun50i-a64-de2-mixer-0 + - allwinner,sun50i-a64-de2-mixer-1 + - allwinner,sun50i-h6-de3-mixer-0 + + reg: + maxItems: 1 + + clocks: + items: + - description: The mixer interface clock + - description: The mixer module clock + + clock-names: + items: + - const: bus + - const: mod + + resets: + maxItems: 1 + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. + + required: + - "#address-cells" + - "#size-cells" + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun8i-de2.h> + #include <dt-bindings/reset/sun8i-de2.h> + + mixer0: mixer@1100000 { + compatible = "allwinner,sun8i-a83t-de2-mixer-0"; + reg = <0x01100000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER0>, + <&display_clocks CLK_MIXER0>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_MIXER0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mixer0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_mixer0>; + }; + + mixer0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_mixer0>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml new file mode 100644 index 000000000000..4d6795690ac3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml @@ -0,0 +1,273 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-dw-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A83t DWC HDMI TX Encoder Device Tree Bindings + +description: | + The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller + IP with Allwinner\'s own PHY IP. It supports audio and video outputs + and CEC. + + These DT bindings follow the Synopsys DWC HDMI TX bindings defined + in Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with + the following device-specific properties. + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 0 + + compatible: + oneOf: + - const: allwinner,sun8i-a83t-dw-hdmi + - const: allwinner,sun50i-h6-dw-hdmi + + - items: + - enum: + - allwinner,sun8i-h3-dw-hdmi + - allwinner,sun8i-r40-dw-hdmi + - allwinner,sun50i-a64-dw-hdmi + - const: allwinner,sun8i-a83t-dw-hdmi + + reg: + maxItems: 1 + + reg-io-width: + const: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 6 + items: + - description: Bus Clock + - description: Register Clock + - description: TMDS Clock + - description: HDMI CEC Clock + - description: HDCP Clock + - description: HDCP Bus Clock + + clock-names: + minItems: 3 + maxItems: 6 + items: + - const: iahb + - const: isfr + - const: tmds + - const: cec + - const: hdcp + - const: hdcp-bus + + resets: + minItems: 1 + maxItems: 2 + items: + - description: HDMI Controller Reset + - description: HDCP Reset + + reset-names: + minItems: 1 + maxItems: 2 + items: + - const: ctrl + - const: hdcp + + phys: + maxItems: 1 + description: + Phandle to the DWC HDMI PHY. + + phy-names: + const: phy + + hvcc-supply: + description: + The VCC power supply of the controller + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. Usually the associated + TCON. + + port@1: + type: object + description: | + Output endpoints of the controller. Usually an HDMI + connector. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - reg-io-width + - interrupts + - clocks + - clock-names + - resets + - reset-names + - phys + - phy-names + - ports + +if: + properties: + compatible: + contains: + enum: + - allwinner,sun50i-h6-dw-hdmi + +then: + properties: + clocks: + minItems: 6 + + clock-names: + minItems: 6 + + resets: + minItems: 2 + + reset-names: + minItems: 2 + + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun8i-a83t-ccu.h and + * reset/sun8i-a83t-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + #define CLK_BUS_HDMI 39 + #define CLK_HDMI 93 + #define CLK_HDMI_SLOW 94 + #define RST_BUS_HDMI1 26 + + hdmi@1ee0000 { + compatible = "allwinner,sun8i-a83t-dw-hdmi"; + reg = <0x01ee0000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>, + <&ccu CLK_HDMI>; + clock-names = "iahb", "isfr", "tmds"; + resets = <&ccu RST_BUS_HDMI1>; + reset-names = "ctrl"; + phys = <&hdmi_phy>; + phy-names = "phy"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + + /* Cleanup after ourselves */ + #undef CLK_BUS_HDMI + #undef CLK_HDMI + #undef CLK_HDMI_SLOW + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun50i-h6-ccu.h and + * reset/sun50i-h6-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + #define CLK_BUS_HDMI 126 + #define CLK_BUS_HDCP 137 + #define CLK_HDMI 123 + #define CLK_HDMI_SLOW 124 + #define CLK_HDMI_CEC 125 + #define CLK_HDCP 136 + #define RST_BUS_HDMI_SUB 57 + #define RST_BUS_HDCP 62 + + hdmi@6000000 { + compatible = "allwinner,sun50i-h6-dw-hdmi"; + reg = <0x06000000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>, + <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>, + <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>; + clock-names = "iahb", "isfr", "tmds", "cec", "hdcp", + "hdcp-bus"; + resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>; + reset-names = "ctrl", "hdcp"; + phys = <&hdmi_phy>; + phy-names = "phy"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&tcon_top_hdmi_out_hdmi>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml new file mode 100644 index 000000000000..501cec16168c --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-hdmi-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A83t HDMI PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 0 + + compatible: + enum: + - allwinner,sun8i-a83t-hdmi-phy + - allwinner,sun8i-h3-hdmi-phy + - allwinner,sun8i-r40-hdmi-phy + - allwinner,sun50i-a64-hdmi-phy + - allwinner,sun50i-h6-hdmi-phy + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 4 + items: + - description: Bus Clock + - description: Module Clock + - description: Parent of the PHY clock + - description: Second possible parent of the PHY clock + + clock-names: + minItems: 2 + maxItems: 4 + items: + - const: bus + - const: mod + - const: pll-0 + - const: pll-1 + + resets: + maxItems: 1 + + reset-names: + const: phy + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + +if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-r40-hdmi-phy + +then: + properties: + clocks: + minItems: 4 + + clock-names: + minItems: 4 + +else: + if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-h3-hdmi-phy + - allwinner,sun50i-a64-hdmi-phy + + then: + properties: + clocks: + minItems: 3 + + clock-names: + minItems: 3 + + else: + properties: + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun8i-a83t-ccu.h> + #include <dt-bindings/reset/sun8i-a83t-ccu.h> + + hdmi_phy: hdmi-phy@1ef0000 { + compatible = "allwinner,sun8i-a83t-hdmi-phy"; + reg = <0x01ef0000 0x10000>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_HDMI0>; + reset-names = "phy"; + #phy-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml new file mode 100644 index 000000000000..b98ca609824b --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml @@ -0,0 +1,382 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun8i-r40-tcon-top.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner R40 TCON TOP Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + TCON TOPs main purpose is to configure whole display pipeline. It + determines relationships between mixers and TCONs, selects source + TCON for HDMI, muxes LCD and TV encoder GPIO output, selects TV + encoder clock source and contains additional TV TCON and DSI gates. + + It allows display pipeline to be configured in very different ways: + + / LCD0/LVDS0 + / [0] TCON-LCD0 + | \ MIPI DSI + mixer0 | + \ / [1] TCON-LCD1 - LCD1/LVDS1 + TCON-TOP + / \ [2] TCON-TV0 [0] - TVE0/RGB + mixer1 | \ + | TCON-TOP - HDMI + | / + \ [3] TCON-TV1 [1] - TVE1/RGB + + Note that both TCON TOP references same physical unit. Both mixers + can be connected to any TCON. Not all TCON TOP variants support all + features. + +properties: + "#clock-cells": + const: 1 + + compatible: + enum: + - allwinner,sun8i-r40-tcon-top + - allwinner,sun50i-h6-tcon-top + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 6 + items: + - description: The TCON TOP interface clock + - description: The TCON TOP TV0 clock + - description: The TCON TOP TVE0 clock + - description: The TCON TOP TV1 clock + - description: The TCON TOP TVE1 clock + - description: The TCON TOP MIPI DSI clock + + clock-names: + minItems: 2 + maxItems: 6 + items: + - const: bus + - const: tcon-tv0 + - const: tve0 + - const: tcon-tv1 + - const: tve1 + - const: dsi + + clock-output-names: + minItems: 1 + maxItems: 3 + description: > + The first item is the name of the clock created for the TV0 + channel, the second item is the name of the TCON TV1 channel + clock and the third one is the name of the DSI channel clock. + + resets: + maxItems: 1 + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + All ports should have only one endpoint connected to + remote endpoint. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoint for Mixer 0 mux. + + port@1: + type: object + description: | + Output endpoint for Mixer 0 mux + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: true + + patternProperties: + "^endpoint@[0-9]$": + type: object + + properties: + reg: + description: | + ID of the target TCON + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + + additionalProperties: false + + port@2: + type: object + description: | + Input endpoint for Mixer 1 mux. + + port@3: + type: object + description: | + Output endpoint for Mixer 1 mux + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: true + + patternProperties: + "^endpoint@[0-9]$": + type: object + + properties: + reg: + description: | + ID of the target TCON + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + + additionalProperties: false + + port@4: + type: object + description: | + Input endpoint for HDMI mux. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: true + + patternProperties: + "^endpoint@[0-9]$": + type: object + + properties: + reg: + description: | + ID of the target TCON + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + + additionalProperties: false + + port@5: + type: object + description: | + Output endpoint for HDMI mux + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + - port@4 + - port@5 + + additionalProperties: false + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-names + - clock-output-names + - resets + - ports + +additionalProperties: false + +if: + properties: + compatible: + contains: + const: allwinner,sun50i-h6-tcon-top + +then: + properties: + clocks: + maxItems: 2 + + clock-output-names: + maxItems: 1 + +else: + properties: + clocks: + minItems: 6 + + clock-output-names: + minItems: 3 + + ports: + required: + - port@2 + - port@3 + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + #include <dt-bindings/clock/sun8i-r40-ccu.h> + #include <dt-bindings/reset/sun8i-r40-ccu.h> + + tcon_top: tcon-top@1c70000 { + compatible = "allwinner,sun8i-r40-tcon-top"; + reg = <0x01c70000 0x1000>; + clocks = <&ccu CLK_BUS_TCON_TOP>, + <&ccu CLK_TCON_TV0>, + <&ccu CLK_TVE0>, + <&ccu CLK_TCON_TV1>, + <&ccu CLK_TVE1>, + <&ccu CLK_DSI_DPHY>; + clock-names = "bus", + "tcon-tv0", + "tve0", + "tcon-tv1", + "tve1", + "dsi"; + clock-output-names = "tcon-top-tv0", + "tcon-top-tv1", + "tcon-top-dsi"; + resets = <&ccu RST_BUS_TCON_TOP>; + #clock-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_top_mixer0_in: port@0 { + reg = <0>; + + tcon_top_mixer0_in_mixer0: endpoint { + remote-endpoint = <&mixer0_out_tcon_top>; + }; + }; + + tcon_top_mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_top_mixer0_out_tcon_lcd0: endpoint@0 { + reg = <0>; + }; + + tcon_top_mixer0_out_tcon_lcd1: endpoint@1 { + reg = <1>; + }; + + tcon_top_mixer0_out_tcon_tv0: endpoint@2 { + reg = <2>; + remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>; + }; + + tcon_top_mixer0_out_tcon_tv1: endpoint@3 { + reg = <3>; + remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>; + }; + }; + + tcon_top_mixer1_in: port@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + tcon_top_mixer1_in_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon_top>; + }; + }; + + tcon_top_mixer1_out: port@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + tcon_top_mixer1_out_tcon_lcd0: endpoint@0 { + reg = <0>; + }; + + tcon_top_mixer1_out_tcon_lcd1: endpoint@1 { + reg = <1>; + }; + + tcon_top_mixer1_out_tcon_tv0: endpoint@2 { + reg = <2>; + remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>; + }; + + tcon_top_mixer1_out_tcon_tv1: endpoint@3 { + reg = <3>; + remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>; + }; + }; + + tcon_top_hdmi_in: port@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + tcon_top_hdmi_in_tcon_tv0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_tv0_out_tcon_top>; + }; + + tcon_top_hdmi_in_tcon_tv1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_tv1_out_tcon_top>; + }; + }; + + tcon_top_hdmi_out: port@5 { + reg = <5>; + + tcon_top_hdmi_out_hdmi: endpoint { + remote-endpoint = <&hdmi_in_tcon_top>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml new file mode 100644 index 000000000000..96de41d32b3e --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun9i-a80-deu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 Detail Enhancement Unit Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The DEU (Detail Enhancement Unit), found in the Allwinner A80 SoC, + can sharpen the display content in both luma and chroma channels. + +properties: + compatible: + const: allwinner,sun9i-a80-deu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The DEU interface clock + - description: The DEU module clock + - description: The DEU DRAM clock + + clock-names: + items: + - const: ahb + - const: mod + - const: ram + + resets: + maxItems: 1 + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + #include <dt-bindings/clock/sun9i-a80-de.h> + #include <dt-bindings/reset/sun9i-a80-de.h> + + deu0: deu@3300000 { + compatible = "allwinner,sun9i-a80-deu"; + reg = <0x03300000 0x40000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_DEU0>, + <&de_clocks CLK_IEP_DEU0>, + <&de_clocks CLK_DRAM_DEU0>; + clock-names = "ahb", + "mod", + "ram"; + resets = <&de_clocks RST_DEU0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + deu0_in: port@0 { + reg = <0>; + + deu0_in_fe0: endpoint { + remote-endpoint = <&fe0_out_deu0>; + }; + }; + + deu0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + deu0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_deu0>; + }; + + deu0_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_deu0>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml new file mode 100644 index 000000000000..8f373029f5d2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lvds-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Transparent LVDS encoders and decoders + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + This binding supports transparent LVDS encoders and decoders that don't + require any configuration. + + LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple + incompatible data link layers have been used over time to transmit image data + to LVDS panels. This binding targets devices compatible with the following + specifications only. + + [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February + 1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA) + [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National + Semiconductor + [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video + Electronics Standards Association (VESA) + + Those devices have been marketed under the FPD-Link and FlatLink brand names + among others. + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer + - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer + - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter + - const: lvds-encoder # Generic LVDS encoder compatible fallback + - items: + - enum: + - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver + - const: lvds-decoder # Generic LVDS decoders compatible fallback + - enum: + - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer + + ports: + type: object + description: | + This device has two video ports. Their connections are modeled using the + OF graph bindings specified in Documentation/devicetree/bindings/graph.txt + properties: + port@0: + type: object + description: | + For LVDS encoders, port 0 is the parallel input + For LVDS decoders, port 0 is the LVDS input + + port@1: + type: object + description: | + For LVDS encoders, port 1 is the LVDS output + For LVDS decoders, port 1 is the parallel output + + required: + - port@0 + - port@1 + + powerdown-gpios: + description: + The GPIO used to control the power down line of this device. + maxItems: 1 + +required: + - compatible + - ports + +examples: + - | + lvds-encoder { + compatible = "ti,ds90c185", "lvds-encoder"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_enc_in: endpoint { + remote-endpoint = <&display_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + + lvds_enc_out: endpoint { + remote-endpoint = <&lvds_panel_in>; + }; + }; + }; + }; + + - | + lvds-decoder { + compatible = "ti,ds90cf384a", "lvds-decoder"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_dec_in: endpoint { + remote-endpoint = <&display_out_lvds>; + }; + }; + + port@1 { + reg = <1>; + + lvds_dec_out: endpoint { + remote-endpoint = <&rgb_panel_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt deleted file mode 100644 index 60091db5dfa5..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt +++ /dev/null @@ -1,66 +0,0 @@ -Parallel to LVDS Encoder ------------------------- - -This binding supports the parallel to LVDS encoders that don't require any -configuration. - -LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple -incompatible data link layers have been used over time to transmit image data -to LVDS panels. This binding targets devices compatible with the following -specifications only. - -[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February -1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA) -[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National -Semiconductor -[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video -Electronics Standards Association (VESA) - -Those devices have been marketed under the FPD-Link and FlatLink brand names -among others. - - -Required properties: - -- compatible: Must be "lvds-encoder" - - Any encoder compatible with this generic binding, but with additional - properties not listed here, must list a device specific compatible first - followed by this generic compatible. - -Required nodes: - -This device has two video ports. Their connections are modeled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for parallel input -- Video port 1 for LVDS output - - -Example -------- - -lvds-encoder { - compatible = "lvds-encoder"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lvds_enc_in: endpoint { - remote-endpoint = <&display_out_rgb>; - }; - }; - - port@1 { - reg = <1>; - - lvds_enc_out: endpoint { - remote-endpoint = <&lvds_panel_in>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt deleted file mode 100644 index fee3c88e1a17..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt +++ /dev/null @@ -1,50 +0,0 @@ -THine Electronics THC63LVDM83D LVDS serializer ----------------------------------------------- - -The THC63LVDM83D is an LVDS serializer designed to support pixel data -transmission between a host and a flat panel. - -Required properties: - -- compatible: Should be "thine,thc63lvdm83d" - -Optional properties: - -- powerdown-gpios: Power down control GPIO (the /PWDN pin, active low). - -Required nodes: - -The THC63LVDM83D has two video ports. Their connections are modeled using the -OFgraph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for CMOS/TTL input -- Video port 1 for LVDS output - - -Example -------- - - lvds_enc: encoder@0 { - compatible = "thine,thc63lvdm83d"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lvds_enc_in: endpoint@0 { - remote-endpoint = <&rgb_out>; - }; - }; - - port@1 { - reg = <1>; - - lvds_enc_out: endpoint@0 { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt b/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt deleted file mode 100644 index e575f996959a..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt +++ /dev/null @@ -1,55 +0,0 @@ -Texas Instruments FPD-Link (LVDS) Serializer --------------------------------------------- - -The DS90C185 and DS90C187 are low-power serializers for portable -battery-powered applications that reduces the size of the RGB -interface between the host GPU and the display. - -Required properties: - -- compatible: Should be - "ti,ds90c185", "lvds-encoder" for the TI DS90C185 FPD-Link Serializer - "ti,ds90c187", "lvds-encoder" for the TI DS90C187 FPD-Link Serializer - -Optional properties: - -- powerdown-gpios: Power down control GPIO (the PDB pin, active-low) - -Required nodes: - -The devices have two video ports. Their connections are modeled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for parallel input -- Video port 1 for LVDS output - - -Example -------- - -lvds-encoder { - compatible = "ti,ds90c185", "lvds-encoder"; - - powerdown-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lvds_enc_in: endpoint { - remote-endpoint = <&lcdc_out_rgb>; - }; - }; - - port@1 { - reg = <1>; - - lvds_enc_out: endpoint { - remote-endpoint = <&lvds_panel_in>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml new file mode 100644 index 000000000000..fd986c36c737 --- /dev/null +++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/dsi-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for DSI Display Panels + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + This document defines device tree properties common to DSI, Display + Serial Interface controllers and attached panels. It doesn't constitute + a device tree binding specification by itself but is meant to be referenced + by device tree bindings. + + When referenced from panel device tree bindings the properties defined in + this document are defined as follows. The panel device tree bindings are + responsible for defining whether each property is required or optional. + + Notice: this binding concerns DSI panels connected directly to a master + without any intermediate port graph to the panel. Each DSI master + can control one to four virtual channels to one panel. Each virtual + channel should have a node "panel" for their virtual channel with their + reg-property set to the virtual channel number, usually there is just + one virtual channel, number 0. + +properties: + $nodename: + pattern: "^dsi-controller(@.*)?$" + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^panel@[0-3]$": + description: Panels connected to the DSI link + type: object + + properties: + reg: + minimum: 0 + maximum: 3 + description: + The virtual channel number of a DSI peripheral. Must be in the range + from 0 to 3, as DSI uses a 2-bit addressing scheme. Some DSI + peripherals respond to more than a single virtual channel. In that + case the reg property can take multiple entries, one for each virtual + channel that the peripheral responds to. + + clock-master: + type: boolean + description: + Should be enabled if the host is being used in conjunction with + another DSI host to drive the same peripheral. Hardware supporting + such a configuration generally requires the data on both the busses + to be driven by the same clock. Only the DSI host instance + controlling this clock should contain this property. + + enforce-video-mode: + type: boolean + description: + The best option is usually to run a panel in command mode, as this + gives better control over the panel hardware. However for different + reasons like broken hardware, missing features or testing, it may be + useful to be able to force a command mode-capable panel into video + mode. + + required: + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + dsi-controller@a0351000 { + reg = <0xa0351000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "sony,acx424akp"; + reg = <0>; + vddi-supply = <&ab8500_ldo_aux1_reg>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.txt b/Documentation/devicetree/bindings/display/ingenic,lcd.txt index 7b536c8c6dde..01e3261defb6 100644 --- a/Documentation/devicetree/bindings/display/ingenic,lcd.txt +++ b/Documentation/devicetree/bindings/display/ingenic,lcd.txt @@ -4,6 +4,7 @@ Required properties: - compatible: one of: * ingenic,jz4740-lcd * ingenic,jz4725b-lcd + * ingenic,jz4770-lcd - reg: LCD registers location and length - clocks: LCD pixclock and device clock specifiers. The device clock is only required on the JZ4740. diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt index a61dd40f3792..551ae26f60da 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu.txt +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt @@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC. MDSS: Required properties: -- compatible: "qcom,sdm845-mdss" +- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss" - reg: physical base address and length of contoller's registers. - reg-names: register region names. The following region is required: * "mdss" @@ -41,7 +41,7 @@ Optional properties: MDP: Required properties: -- compatible: "qcom,sdm845-dpu" +- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu" - reg: physical base address and length of controller's registers. - reg-names : register region names. The following region is required: * "mdp" diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt index 2b8fd26c43b0..7edc298a15f2 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.txt +++ b/Documentation/devicetree/bindings/display/msm/gpu.txt @@ -23,13 +23,18 @@ Required properties: - iommus: optional phandle to an adreno iommu instance - operating-points-v2: optional phandle to the OPP operating points - interconnects: optional phandle to an interconnect provider. See - ../interconnect/interconnect.txt for details. + ../interconnect/interconnect.txt for details. Some A3xx and all A4xx platforms + will have two paths; all others will have one path. +- interconnect-names: The names of the interconnect paths that correspond to the + interconnects property. Values must be gfx-mem and ocmem. - qcom,gmu: For GMU attached devices a phandle to the GMU device that will control the power for the GPU. Applicable targets: - qcom,adreno-630.2 - zap-shader: For a5xx and a6xx devices this node contains a memory-region that points to reserved memory to store the zap shader that can be used to help bring the GPU out of secure mode. +- firmware-name: optional property of the 'zap-shader' node, listing the + relative path of the device specific zap firmware. Example 3xx/4xx/a5xx: @@ -76,11 +81,13 @@ Example a6xx (with GMU): operating-points-v2 = <&gpu_opp_table>; interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>; + interconnect-names = "gfx-mem"; qcom,gmu = <&gmu>; zap-shader { memory-region = <&zap_shader_region>; + firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn" }; }; }; diff --git a/Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.yaml b/Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.yaml deleted file mode 100644 index c6e33e7f36d0..000000000000 --- a/Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.yaml +++ /dev/null @@ -1,42 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/panel/ampire,am-480272h3tmqw-t01h.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel - -maintainers: - - Yannick Fertre <yannick.fertre@st.com> - - Thierry Reding <treding@nvidia.com> - -allOf: - - $ref: panel-common.yaml# - -properties: - compatible: - const: ampire,am-480272h3tmqw-t01h - - power-supply: true - enable-gpios: true - backlight: true - port: true - -required: - - compatible - -additionalProperties: false - -examples: - - | - panel_rgb: panel { - compatible = "ampire,am-480272h3tmqw-t01h"; - enable-gpios = <&gpioa 8 1>; - port { - panel_in_rgb: endpoint { - remote-endpoint = <&controller_out_rgb>; - }; - }; - }; - -... diff --git a/Documentation/devicetree/bindings/display/panel/ampire,am800480r3tmqwa1h.txt b/Documentation/devicetree/bindings/display/panel/ampire,am800480r3tmqwa1h.txt deleted file mode 100644 index 83e2cae1cc1b..000000000000 --- a/Documentation/devicetree/bindings/display/panel/ampire,am800480r3tmqwa1h.txt +++ /dev/null @@ -1,7 +0,0 @@ -Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel - -Required properties: -- compatible: should be "ampire,am800480r3tmqwa1h" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/giantplus,gpm940b0.txt b/Documentation/devicetree/bindings/display/panel/giantplus,gpm940b0.txt deleted file mode 100644 index 3dab52f92c26..000000000000 --- a/Documentation/devicetree/bindings/display/panel/giantplus,gpm940b0.txt +++ /dev/null @@ -1,12 +0,0 @@ -GiantPlus 3.0" (320x240 pixels) 24-bit TFT LCD panel - -Required properties: -- compatible: should be "giantplus,gpm940b0" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding -- enable-gpios: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml new file mode 100644 index 000000000000..4ebcea7d0c63 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/leadtek,ltk500hd1829.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Leadtek LTK500HD1829 5.0in 720x1280 DSI panel + +maintainers: + - Heiko Stuebner <heiko.stuebner@theobroma-systems.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: leadtek,ltk500hd1829 + reg: true + backlight: true + reset-gpios: true + iovcc-supply: + description: regulator that supplies the iovcc voltage + vcc-supply: + description: regulator that supplies the vcc voltage + +required: + - compatible + - reg + - backlight + - iovcc-supply + - vcc-supply + +additionalProperties: false + +examples: + - | + dsi@ff450000 { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "leadtek,ltk500hd1829"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_1v8>; + vcc-supply = <&vcc_2v8>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml new file mode 100644 index 000000000000..2834287b8d88 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/logicpd,type28.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Logic PD Type 28 4.3" WQVGA TFT LCD panel + +maintainers: + - Adam Ford <aford173@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: logicpd,type28 + + power-supply: true + enable-gpios: true + backlight: true + port: true + +required: + - compatible + +additionalProperties: false + +examples: + - | + lcd0: display { + compatible = "logicpd,type28"; + enable-gpios = <&gpio5 27 0>; + backlight = <&backlight>; + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml new file mode 100644 index 000000000000..8fe60ee2531c --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-simple.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple panels with one power supply + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Sam Ravnborg <sam@ravnborg.org> + +description: | + This binding file is a collection of the simple (dumb) panels that + requires only a single power-supply. + There are optionally a backlight and an enable GPIO. + The panel may use an OF graph binding for the association to the display, + or it may be a direct child node of the display. + + If the panel is more advanced a dedicated binding file is required. + +allOf: + - $ref: panel-common.yaml# + +properties: + + compatible: + enum: + # compatible must be listed in alphabetical order, ordered by compatible. + # The description in the comment is mandatory for each compatible. + + # Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel + - ampire,am-480272h3tmqw-t01h + # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel + - ampire,am800480r3tmqwa1h + # AUO B116XAK01 eDP TFT LCD panel + - auo,b116xa01 + # BOE NV140FHM-N49 14.0" FHD a-Si FT panel + - boe,nv140fhmn49 + # GiantPlus GPM940B0 3.0" QVGA TFT LCD panel + - giantplus,gpm940b0 + # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel + - satoz,sat050at40h12r2 + # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel + - sharp,ls020b1dd01d + + backlight: true + enable-gpios: true + port: true + power-supply: true + +additionalProperties: false + +required: + - compatible + - power-supply + +examples: + - | + panel_rgb: panel-rgb { + compatible = "ampire,am-480272h3tmqw-t01h"; + power-supply = <&vcc_lcd_reg>; + + port { + panel_in_rgb: endpoint { + remote-endpoint = <<dc_out_rgb>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls020b1dd01d.txt b/Documentation/devicetree/bindings/display/panel/sharp,ls020b1dd01d.txt deleted file mode 100644 index e45edbc565a3..000000000000 --- a/Documentation/devicetree/bindings/display/panel/sharp,ls020b1dd01d.txt +++ /dev/null @@ -1,12 +0,0 @@ -Sharp 2.0" (240x160 pixels) 16-bit TFT LCD panel - -Required properties: -- compatible: should be "sharp,ls020b1dd01d" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding -- enable-gpios: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml new file mode 100644 index 000000000000..185dcc8fd1f9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sony,acx424akp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony ACX424AKP 4" 480x864 AMOLED panel + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sony,acx424akp + reg: true + reset-gpios: true + vddi-supply: + description: regulator that supplies the vddi voltage + enforce-video-mode: true + +required: + - compatible + - reg + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi-controller@a0351000 { + compatible = "ste,mcde-dsi"; + reg = <0xa0351000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sony,acx424akp"; + reg = <0>; + vddi-supply = <&foo>; + reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml new file mode 100644 index 000000000000..186e5e1c8fa3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/xinpeng,xpp055c272.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xinpeng XPP055C272 5.5in 720x1280 DSI panel + +maintainers: + - Heiko Stuebner <heiko.stuebner@theobroma-systems.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: xinpeng,xpp055c272 + reg: true + backlight: true + reset-gpios: true + iovcc-supply: + description: regulator that supplies the iovcc voltage + vci-supply: + description: regulator that supplies the vci voltage + +required: + - compatible + - reg + - backlight + - iovcc-supply + - vci-supply + +additionalProperties: false + +examples: + - | + dsi@ff450000 { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "xinpeng,xpp055c272"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_1v8>; + vci-supply = <&vcc3v3_lcd>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/renesas,cmm.yaml b/Documentation/devicetree/bindings/display/renesas,cmm.yaml new file mode 100644 index 000000000000..a57037b9e9ba --- /dev/null +++ b/Documentation/devicetree/bindings/display/renesas,cmm.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/renesas,cmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Color Management Module (CMM) + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + - Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> + - Jacopo Mondi <jacopo+renesas@jmondi.org> + +description: |+ + Renesas R-Car color management module connected to R-Car DU video channels. + It provides image enhancement functions such as 1-D look-up tables (LUT), + 3-D look-up tables (CLU), 1D-histogram generation (HGO), and color + space conversion (CSC). + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,r8a7795-cmm + - renesas,r8a7796-cmm + - renesas,r8a77965-cmm + - renesas,r8a77990-cmm + - renesas,r8a77995-cmm + - const: renesas,rcar-gen3-cmm + - items: + - const: renesas,rcar-gen2-cmm + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - resets + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7796-cpg-mssr.h> + #include <dt-bindings/power/r8a7796-sysc.h> + + cmm0: cmm@fea40000 { + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt index 17cb2771364b..eb4ae41fe41f 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.txt +++ b/Documentation/devicetree/bindings/display/renesas,du.txt @@ -41,10 +41,14 @@ Required Properties: supplied they must be named "dclkin.x" with "x" being the input clock numerical index. - - vsps: A list of phandle and channel index tuples to the VSPs that handle - the memory interfaces for the DU channels. The phandle identifies the VSP - instance that serves the DU channel, and the channel index identifies the - LIF instance in that VSP. + - renesas,cmms: A list of phandles to the CMM instances present in the SoC, + one for each available DU channel. The property shall not be specified for + SoCs that do not provide any CMM (such as V3M and V3H). + + - renesas,vsps: A list of phandle and channel index tuples to the VSPs that + handle the memory interfaces for the DU channels. The phandle identifies the + VSP instance that serves the DU channel, and the channel index identifies + the LIF instance in that VSP. Required nodes: @@ -92,7 +96,8 @@ Example: R8A7795 (R-Car H3) ES2.0 DU <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>; clock-names = "du.0", "du.1", "du.2", "du.3"; - vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; + renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>; + renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt index ce4c1fc9116c..151be3bba06f 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt @@ -4,13 +4,16 @@ Rockchip specific extensions to the Synopsys Designware MIPI DSI Required properties: - #address-cells: Should be <1>. - #size-cells: Should be <0>. -- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi". - "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi". +- compatible: one of + "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi" + "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi" + "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi" - reg: Represent the physical address range of the controller. - interrupts: Represent the controller's interrupt to the CPU(s). - clocks, clock-names: Phandles to the controller's pll reference - clock(ref) and APB clock(pclk). For RK3399, a phy config clock - (phy_cfg) and a grf clock(grf) are required. As described in [1]. + clock(ref) when using an internal dphy and APB clock(pclk). + For RK3399, a phy config clock (phy_cfg) and a grf clock(grf) + are required. As described in [1]. - rockchip,grf: this soc should set GRF regs to mux vopl/vopb. - ports: contain a port node with endpoint definitions as defined in [2]. For vopb,set the reg = <0> and set the reg = <1> for vopl. @@ -18,6 +21,8 @@ Required properties: - video port 1 for either a panel or subsequent encoder Optional properties: +- phys: from general PHY binding: the phandle for the PHY device. +- phy-names: Should be "dphy" if phys references an external phy. - power-domains: a phandle to mipi dsi power domain node. - resets: list of phandle + reset specifier pairs, as described in [3]. - reset-names: string reset name, must be "apb". diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt index 7849ff039229..aaf8c44cf90f 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt @@ -4,6 +4,7 @@ Rockchip RK3288 LVDS interface Required properties: - compatible: matching the soc type, one of - "rockchip,rk3288-lvds"; + - "rockchip,px30-lvds"; - reg: physical base address of the controller and length of memory mapped region. @@ -18,6 +19,9 @@ Required properties: - rockchip,grf: phandle to the general register files syscon - rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface +- phys: LVDS/DSI DPHY (px30 only) +- phy-names: name of the PHY, must be "dphy" (px30 only) + Optional properties: - pinctrl-names: must contain a "lcdc" entry. - pinctrl-0: pin control group to be used for this controller. diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt deleted file mode 100644 index 31ab72cba3d4..000000000000 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ /dev/null @@ -1,637 +0,0 @@ -Allwinner A10 Display Pipeline -============================== - -The Allwinner A10 Display pipeline is composed of several components -that are going to be documented below: - -For all connections between components up to the TCONs in the display -pipeline, when there are multiple components of the same type at the -same depth, the local endpoint ID must be the same as the remote -component's index. For example, if the remote endpoint is Frontend 1, -then the local endpoint ID must be 1. - - Frontend 0 [0] ------- [0] Backend 0 [0] ------- [0] TCON 0 - [1] -- -- [1] [1] -- -- [1] - \ / \ / - X X - / \ / \ - [0] -- -- [0] [0] -- -- [0] - Frontend 1 [1] ------- [1] Backend 1 [1] ------- [1] TCON 1 - -For a two pipeline system such as the one depicted above, the lines -represent the connections between the components, while the numbers -within the square brackets corresponds to the ID of the local endpoint. - -The same rule also applies to DE 2.0 mixer-TCON connections: - - Mixer 0 [0] ----------- [0] TCON 0 - [1] ---- ---- [1] - \ / - X - / \ - [0] ---- ---- [0] - Mixer 1 [1] ----------- [1] TCON 1 - -HDMI Encoder ------------- - -The HDMI Encoder supports the HDMI video and audio outputs, and does -CEC. It is one end of the pipeline. - -Required properties: - - compatible: value must be one of: - * allwinner,sun4i-a10-hdmi - * allwinner,sun5i-a10s-hdmi - * allwinner,sun6i-a31-hdmi - - reg: base address and size of memory-mapped region - - interrupts: interrupt associated to this IP - - clocks: phandles to the clocks feeding the HDMI encoder - * ahb: the HDMI interface clock - * mod: the HDMI module clock - * ddc: the HDMI ddc clock (A31 only) - * pll-0: the first video PLL - * pll-1: the second video PLL - - clock-names: the clock names mentioned above - - resets: phandle to the reset control for the HDMI encoder (A31 only) - - dmas: phandles to the DMA channels used by the HDMI encoder - * ddc-tx: The channel for DDC transmission - * ddc-rx: The channel for DDC reception - * audio-tx: The channel used for audio transmission - - dma-names: the channel names mentioned above - - - ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoint. The second should be the - output, usually to an HDMI connector. - -DWC HDMI TX Encoder -------------------- - -The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP -with Allwinner's own PHY IP. It supports audio and video outputs and CEC. - -These DT bindings follow the Synopsys DWC HDMI TX bindings defined in -Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the -following device-specific properties. - -Required properties: - - - compatible: value must be one of: - * "allwinner,sun8i-a83t-dw-hdmi" - * "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi" - * "allwinner,sun50i-h6-dw-hdmi" - - reg: base address and size of memory-mapped region - - reg-io-width: See dw_hdmi.txt. Shall be 1. - - interrupts: HDMI interrupt number - - clocks: phandles to the clocks feeding the HDMI encoder - * iahb: the HDMI bus clock - * isfr: the HDMI register clock - * tmds: TMDS clock - * cec: HDMI CEC clock (H6 only) - * hdcp: HDCP clock (H6 only) - * hdcp-bus: HDCP bus clock (H6 only) - - clock-names: the clock names mentioned above - - resets: - * ctrl: HDMI controller reset - * hdcp: HDCP reset (H6 only) - - reset-names: reset names mentioned above - - phys: phandle to the DWC HDMI PHY - - phy-names: must be "phy" - - - ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoint. The second should be the - output, usually to an HDMI connector. - -Optional properties: - - hvcc-supply: the VCC power supply of the controller - -DWC HDMI PHY ------------- - -Required properties: - - compatible: value must be one of: - * allwinner,sun8i-a83t-hdmi-phy - * allwinner,sun8i-h3-hdmi-phy - * allwinner,sun8i-r40-hdmi-phy - * allwinner,sun50i-a64-hdmi-phy - * allwinner,sun50i-h6-hdmi-phy - - reg: base address and size of memory-mapped region - - clocks: phandles to the clocks feeding the HDMI PHY - * bus: the HDMI PHY interface clock - * mod: the HDMI PHY module clock - - clock-names: the clock names mentioned above - - resets: phandle to the reset controller driving the PHY - - reset-names: must be "phy" - -H3, A64 and R40 HDMI PHY require additional clocks: - - pll-0: parent of phy clock - - pll-1: second possible phy clock parent (A64/R40 only) - -TV Encoder ----------- - -The TV Encoder supports the composite and VGA output. It is one end of -the pipeline. - -Required properties: - - compatible: value should be "allwinner,sun4i-a10-tv-encoder". - - reg: base address and size of memory-mapped region - - clocks: the clocks driving the TV encoder - - resets: phandle to the reset controller driving the encoder - -- ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoint. - -TCON ----- - -The TCON acts as a timing controller for RGB, LVDS and TV interfaces. - -Required properties: - - compatible: value must be either: - * allwinner,sun4i-a10-tcon - * allwinner,sun5i-a13-tcon - * allwinner,sun6i-a31-tcon - * allwinner,sun6i-a31s-tcon - * allwinner,sun7i-a20-tcon - * allwinner,sun8i-a23-tcon - * allwinner,sun8i-a33-tcon - * allwinner,sun8i-a83t-tcon-lcd - * allwinner,sun8i-a83t-tcon-tv - * allwinner,sun8i-r40-tcon-tv - * allwinner,sun8i-v3s-tcon - * allwinner,sun9i-a80-tcon-lcd - * allwinner,sun9i-a80-tcon-tv - * "allwinner,sun50i-a64-tcon-lcd", "allwinner,sun8i-a83t-tcon-lcd" - * "allwinner,sun50i-a64-tcon-tv", "allwinner,sun8i-a83t-tcon-tv" - * allwinner,sun50i-h6-tcon-tv, allwinner,sun8i-r40-tcon-tv - - reg: base address and size of memory-mapped region - - interrupts: interrupt associated to this IP - - clocks: phandles to the clocks feeding the TCON. - - 'ahb': the interface clocks - - 'tcon-ch0': The clock driving the TCON channel 0, if supported - - resets: phandles to the reset controllers driving the encoder - - "lcd": the reset line for the TCON - - "edp": the reset line for the eDP block (A80 only) - - - clock-names: the clock names mentioned above - - reset-names: the reset names mentioned above - - clock-output-names: Name of the pixel clock created, if TCON supports - channel 0. - -- ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoint, the second one the output - - The output may have multiple endpoints. TCON can have 1 or 2 channels, - usually with the first channel being used for the panels interfaces - (RGB, LVDS, etc.), and the second being used for the outputs that - require another controller (TV Encoder, HDMI, etc.). The endpoints - will take an extra property, allwinner,tcon-channel, to specify the - channel the endpoint is associated to. If that property is not - present, the endpoint number will be used as the channel number. - -For TCONs with channel 0, there is one more clock required: - - 'tcon-ch0': The clock driving the TCON channel 0 -For TCONs with channel 1, there is one more clock required: - - 'tcon-ch1': The clock driving the TCON channel 1 - -When TCON support LVDS (all TCONs except TV TCONs on A83T, R40 and those found -in A13, H3, H5 and V3s SoCs), you need one more reset line: - - 'lvds': The reset line driving the LVDS logic - -And on the A23, A31, A31s and A33, you need one more clock line: - - 'lvds-alt': An alternative clock source, separate from the TCON channel 0 - clock, that can be used to drive the LVDS clock - -TCON TOP --------- - -TCON TOPs main purpose is to configure whole display pipeline. It determines -relationships between mixers and TCONs, selects source TCON for HDMI, muxes -LCD and TV encoder GPIO output, selects TV encoder clock source and contains -additional TV TCON and DSI gates. - -It allows display pipeline to be configured in very different ways: - - / LCD0/LVDS0 - / [0] TCON-LCD0 - | \ MIPI DSI - mixer0 | - \ / [1] TCON-LCD1 - LCD1/LVDS1 - TCON-TOP - / \ [2] TCON-TV0 [0] - TVE0/RGB - mixer1 | \ - | TCON-TOP - HDMI - | / - \ [3] TCON-TV1 [1] - TVE1/RGB - -Note that both TCON TOP references same physical unit. Both mixers can be -connected to any TCON. Not all TCON TOP variants support all features. - -Required properties: - - compatible: value must be one of: - * allwinner,sun8i-r40-tcon-top - * allwinner,sun50i-h6-tcon-top - - reg: base address and size of the memory-mapped region. - - clocks: phandle to the clocks feeding the TCON TOP - * bus: TCON TOP interface clock - * tcon-tv0: TCON TV0 clock - * tve0: TVE0 clock (R40 only) - * tcon-tv1: TCON TV1 clock (R40 only) - * tve1: TVE0 clock (R40 only) - * dsi: MIPI DSI clock (R40 only) - - clock-names: clock name mentioned above - - resets: phandle to the reset line driving the TCON TOP - - #clock-cells : must contain 1 - - clock-output-names: Names of clocks created for TCON TV0 channel clock, - TCON TV1 channel clock (R40 only) and DSI channel clock (R40 only), in - that order. - -- ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. 6 ports should - be defined: - * port 0 is input for mixer0 mux - * port 1 is output for mixer0 mux - * port 2 is input for mixer1 mux - * port 3 is output for mixer1 mux - * port 4 is input for HDMI mux - * port 5 is output for HDMI mux - All output endpoints for mixer muxes and input endpoints for HDMI mux should - have reg property with the id of the target TCON, as shown in above graph - (0-3 for mixer muxes and 0-1 for HDMI mux). All ports should have only one - endpoint connected to remote endpoint. - -DRC ---- - -The DRC (Dynamic Range Controller), found in the latest Allwinner SoCs -(A31, A23, A33, A80), allows to dynamically adjust pixel -brightness/contrast based on histogram measurements for LCD content -adaptive backlight control. - - -Required properties: - - compatible: value must be one of: - * allwinner,sun6i-a31-drc - * allwinner,sun6i-a31s-drc - * allwinner,sun8i-a23-drc - * allwinner,sun8i-a33-drc - * allwinner,sun9i-a80-drc - - reg: base address and size of the memory-mapped region. - - interrupts: interrupt associated to this IP - - clocks: phandles to the clocks feeding the DRC - * ahb: the DRC interface clock - * mod: the DRC module clock - * ram: the DRC DRAM clock - - clock-names: the clock names mentioned above - - resets: phandles to the reset line driving the DRC - -- ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoints, the second one the outputs - -Display Engine Backend ----------------------- - -The display engine backend exposes layers and sprites to the -system. - -Required properties: - - compatible: value must be one of: - * allwinner,sun4i-a10-display-backend - * allwinner,sun5i-a13-display-backend - * allwinner,sun6i-a31-display-backend - * allwinner,sun7i-a20-display-backend - * allwinner,sun8i-a23-display-backend - * allwinner,sun8i-a33-display-backend - * allwinner,sun9i-a80-display-backend - - reg: base address and size of the memory-mapped region. - - interrupts: interrupt associated to this IP - - clocks: phandles to the clocks feeding the frontend and backend - * ahb: the backend interface clock - * mod: the backend module clock - * ram: the backend DRAM clock - - clock-names: the clock names mentioned above - - resets: phandles to the reset controllers driving the backend - -- ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoints, the second one the output - -On the A33, some additional properties are required: - - reg needs to have an additional region corresponding to the SAT - - reg-names need to be set, with "be" and "sat" - - clocks and clock-names need to have a phandle to the SAT bus - clocks, whose name will be "sat" - - resets and reset-names need to have a phandle to the SAT bus - resets, whose name will be "sat" - -DEU ---- - -The DEU (Detail Enhancement Unit), found in the Allwinner A80 SoC, -can sharpen the display content in both luma and chroma channels. - -Required properties: - - compatible: value must be one of: - * allwinner,sun9i-a80-deu - - reg: base address and size of the memory-mapped region. - - interrupts: interrupt associated to this IP - - clocks: phandles to the clocks feeding the DEU - * ahb: the DEU interface clock - * mod: the DEU module clock - * ram: the DEU DRAM clock - - clock-names: the clock names mentioned above - - resets: phandles to the reset line driving the DEU - -- ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoints, the second one the outputs - -Display Engine Frontend ------------------------ - -The display engine frontend does formats conversion, scaling, -deinterlacing and color space conversion. - -Required properties: - - compatible: value must be one of: - * allwinner,sun4i-a10-display-frontend - * allwinner,sun5i-a13-display-frontend - * allwinner,sun6i-a31-display-frontend - * allwinner,sun7i-a20-display-frontend - * allwinner,sun8i-a23-display-frontend - * allwinner,sun8i-a33-display-frontend - * allwinner,sun9i-a80-display-frontend - - reg: base address and size of the memory-mapped region. - - interrupts: interrupt associated to this IP - - clocks: phandles to the clocks feeding the frontend and backend - * ahb: the backend interface clock - * mod: the backend module clock - * ram: the backend DRAM clock - - clock-names: the clock names mentioned above - - resets: phandles to the reset controllers driving the backend - -- ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoints, the second one the outputs - -Display Engine 2.0 Mixer ------------------------- - -The DE2 mixer have many functionalities, currently only layer blending is -supported. - -Required properties: - - compatible: value must be one of: - * allwinner,sun8i-a83t-de2-mixer-0 - * allwinner,sun8i-a83t-de2-mixer-1 - * allwinner,sun8i-h3-de2-mixer-0 - * allwinner,sun8i-r40-de2-mixer-0 - * allwinner,sun8i-r40-de2-mixer-1 - * allwinner,sun8i-v3s-de2-mixer - * allwinner,sun50i-a64-de2-mixer-0 - * allwinner,sun50i-a64-de2-mixer-1 - * allwinner,sun50i-h6-de3-mixer-0 - - reg: base address and size of the memory-mapped region. - - clocks: phandles to the clocks feeding the mixer - * bus: the mixer interface clock - * mod: the mixer module clock - - clock-names: the clock names mentioned above - - resets: phandles to the reset controllers driving the mixer - -- ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoints, the second one the output - - -Display Engine Pipeline ------------------------ - -The display engine pipeline (and its entry point, since it can be -either directly the backend or the frontend) is represented as an -extra node. - -Required properties: - - compatible: value must be one of: - * allwinner,sun4i-a10-display-engine - * allwinner,sun5i-a10s-display-engine - * allwinner,sun5i-a13-display-engine - * allwinner,sun6i-a31-display-engine - * allwinner,sun6i-a31s-display-engine - * allwinner,sun7i-a20-display-engine - * allwinner,sun8i-a23-display-engine - * allwinner,sun8i-a33-display-engine - * allwinner,sun8i-a83t-display-engine - * allwinner,sun8i-h3-display-engine - * allwinner,sun8i-r40-display-engine - * allwinner,sun8i-v3s-display-engine - * allwinner,sun9i-a80-display-engine - * allwinner,sun50i-a64-display-engine - * allwinner,sun50i-h6-display-engine - - - allwinner,pipelines: list of phandle to the display engine - frontends (DE 1.0) or mixers (DE 2.0/3.0) available. - -Example: - -panel: panel { - compatible = "olimex,lcd-olinuxino-43-ts"; - #address-cells = <1>; - #size-cells = <0>; - - port { - #address-cells = <1>; - #size-cells = <0>; - - panel_input: endpoint { - remote-endpoint = <&tcon0_out_panel>; - }; - }; -}; - -connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; -}; - -hdmi: hdmi@1c16000 { - compatible = "allwinner,sun5i-a10s-hdmi"; - reg = <0x01c16000 0x1000>; - interrupts = <58>; - clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>, - <&ccu CLK_PLL_VIDEO0_2X>, - <&ccu CLK_PLL_VIDEO1_2X>; - clock-names = "ahb", "mod", "pll-0", "pll-1"; - dmas = <&dma SUN4I_DMA_NORMAL 16>, - <&dma SUN4I_DMA_NORMAL 16>, - <&dma SUN4I_DMA_DEDICATED 24>; - dma-names = "ddc-tx", "ddc-rx", "audio-tx"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - hdmi_in_tcon0: endpoint { - remote-endpoint = <&tcon0_out_hdmi>; - }; - }; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; - }; - }; -}; - -tve0: tv-encoder@1c0a000 { - compatible = "allwinner,sun4i-a10-tv-encoder"; - reg = <0x01c0a000 0x1000>; - clocks = <&ahb_gates 34>; - resets = <&tcon_ch0_clk 0>; - - port { - #address-cells = <1>; - #size-cells = <0>; - - tve0_in_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_out_tve0>; - }; - }; -}; - -tcon0: lcd-controller@1c0c000 { - compatible = "allwinner,sun5i-a13-tcon"; - reg = <0x01c0c000 0x1000>; - interrupts = <44>; - resets = <&tcon_ch0_clk 1>; - reset-names = "lcd"; - clocks = <&ahb_gates 36>, - <&tcon_ch0_clk>, - <&tcon_ch1_clk>; - clock-names = "ahb", - "tcon-ch0", - "tcon-ch1"; - clock-output-names = "tcon-pixel-clock"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tcon0_in_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_out_tcon0>; - }; - }; - - tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tcon0_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_input>; - }; - - tcon0_out_tve0: endpoint@1 { - reg = <1>; - remote-endpoint = <&tve0_in_tcon0>; - }; - }; - }; -}; - -fe0: display-frontend@1e00000 { - compatible = "allwinner,sun5i-a13-display-frontend"; - reg = <0x01e00000 0x20000>; - interrupts = <47>; - clocks = <&ahb_gates 46>, <&de_fe_clk>, - <&dram_gates 25>; - clock-names = "ahb", "mod", - "ram"; - resets = <&de_fe_clk>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - fe0_out_be0: endpoint { - remote-endpoint = <&be0_in_fe0>; - }; - }; - }; -}; - -be0: display-backend@1e60000 { - compatible = "allwinner,sun5i-a13-display-backend"; - reg = <0x01e60000 0x10000>; - interrupts = <47>; - clocks = <&ahb_gates 44>, <&de_be_clk>, - <&dram_gates 26>; - clock-names = "ahb", "mod", - "ram"; - resets = <&de_be_clk>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - be0_in_fe0: endpoint@0 { - reg = <0>; - remote-endpoint = <&fe0_out_be0>; - }; - }; - - be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - be0_out_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_in_be0>; - }; - }; - }; -}; - -display-engine { - compatible = "allwinner,sun5i-a13-display-engine"; - allwinner,pipelines = <&fe0>; -}; diff --git a/Documentation/devicetree/bindings/display/tilcdc/tfp410.txt b/Documentation/devicetree/bindings/display/tilcdc/tfp410.txt deleted file mode 100644 index a58ae7756fc6..000000000000 --- a/Documentation/devicetree/bindings/display/tilcdc/tfp410.txt +++ /dev/null @@ -1,21 +0,0 @@ -Device-Tree bindings for tilcdc DRM TFP410 output driver - -Required properties: - - compatible: value should be "ti,tilcdc,tfp410". - - i2c: the phandle for the i2c device to use for DDC - -Recommended properties: - - pinctrl-names, pinctrl-0: the pincontrol settings to configure - muxing properly for pins that connect to TFP410 device - - powerdn-gpio: the powerdown GPIO, pulled low to power down the - TFP410 device (for DPMS_OFF) - -Example: - - dvicape { - compatible = "ti,tilcdc,tfp410"; - i2c = <&i2c2>; - pinctrl-names = "default"; - pinctrl-0 = <&bone_dvi_cape_dvi_00A1_pins>; - powerdn-gpio = <&gpio2 31 0>; - }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml index 230d74f22136..d0b541a461f3 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml @@ -15,7 +15,11 @@ properties: const: 0 compatible: - const: allwinner,sun6i-a31-mipi-dphy + oneOf: + - const: allwinner,sun6i-a31-mipi-dphy + - items: + - const: allwinner,sun50i-a64-mipi-dphy + - const: allwinner,sun6i-a31-mipi-dphy reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 146fbb688cda..1bc7b3c4b591 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -521,6 +521,8 @@ patternProperties: description: Lantiq Semiconductor "^lattice,.*": description: Lattice Semiconductor + "^leadtek,.*": + description: Shenzhen Leadtek Technology Co., Ltd. "^leez,.*": description: Leez "^lego,.*": @@ -835,6 +837,8 @@ patternProperties: description: Sancloud Ltd "^sandisk,.*": description: Sandisk Corporation + "^satoz,.*": + description: Satoz International Co., Ltd "^sbs,.*": description: Smart Battery System "^schindler,.*": @@ -1072,6 +1076,8 @@ patternProperties: description: Extreme Engineering Solutions (X-ES) "^xillybus,.*": description: Xillybus Ltd. + "^xinpeng,.*": + description: Shenzhen Xinpeng Technology Co., Ltd "^xlnx,.*": description: Xilinx "^xunlong,.*": diff --git a/Documentation/fb/fbcon.rst b/Documentation/fb/fbcon.rst index ebca41785abe..e57a3d1d085a 100644 --- a/Documentation/fb/fbcon.rst +++ b/Documentation/fb/fbcon.rst @@ -127,7 +127,7 @@ C. Boot options is typically located on the same video card. Thus, the consoles that are controlled by the VGA console will be garbled. -4. fbcon=rotate:<n> +5. fbcon=rotate:<n> This option changes the orientation angle of the console display. The value 'n' accepts the following: @@ -152,21 +152,21 @@ C. Boot options Actually, the underlying fb driver is totally ignorant of console rotation. -5. fbcon=margin:<color> +6. fbcon=margin:<color> This option specifies the color of the margins. The margins are the leftover area at the right and the bottom of the screen that are not used by text. By default, this area will be black. The 'color' value is an integer number that depends on the framebuffer driver being used. -6. fbcon=nodefer +7. fbcon=nodefer If the kernel is compiled with deferred fbcon takeover support, normally the framebuffer contents, left in place by the firmware/bootloader, will be preserved until there actually is some text is output to the console. This option causes fbcon to bind immediately to the fbdev device. -7. fbcon=logo-pos:<location> +8. fbcon=logo-pos:<location> The only possible 'location' is 'center' (without quotes), and when given, the bootup logo is moved from the default top-left corner @@ -174,6 +174,11 @@ C. Boot options displayed due to multiple CPUs, the collected line of logos is moved as a whole. +9. fbcon=logo-count:<n> + + The value 'n' overrides the number of bootup logos. 0 disables the + logo, and -1 gives the default which is the number of online CPUs. + C. Attaching, Detaching and Unloading Before going on to how to attach, detach and unload the framebuffer console, an diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst index 9c4e3fd39e6d..624d08fd2856 100644 --- a/Documentation/fb/modedb.rst +++ b/Documentation/fb/modedb.rst @@ -65,6 +65,9 @@ Valid options are:: - reflect_y (boolean): Perform an axial symmetry on the Y axis - rotate (integer): Rotate the initial framebuffer by x degrees. Valid values are 0, 90, 180 and 270. + - panel_orientation, one of "normal", "upside_down", "left_side_up", or + "right_side_up". For KMS drivers only, this sets the "panel orientation" + property on the kms connector as hint for kms users. ----------------------------------------------------------------------------- diff --git a/Documentation/gpu/drm-internals.rst b/Documentation/gpu/drm-internals.rst index 966bd2d9f0cc..a73320576ca9 100644 --- a/Documentation/gpu/drm-internals.rst +++ b/Documentation/gpu/drm-internals.rst @@ -24,9 +24,9 @@ Driver Initialization At the core of every DRM driver is a :c:type:`struct drm_driver <drm_driver>` structure. Drivers typically statically initialize a drm_driver structure, and then pass it to -:c:func:`drm_dev_alloc()` to allocate a device instance. After the +drm_dev_alloc() to allocate a device instance. After the device instance is fully initialized it can be registered (which makes -it accessible from userspace) using :c:func:`drm_dev_register()`. +it accessible from userspace) using drm_dev_register(). The :c:type:`struct drm_driver <drm_driver>` structure contains static information that describes the driver and features it diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index 23a3c986ef6d..906771e03103 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -3,7 +3,7 @@ Kernel Mode Setting (KMS) ========================= Drivers must initialize the mode setting core by calling -:c:func:`drm_mode_config_init()` on the DRM device. The function +drm_mode_config_init() on the DRM device. The function initializes the :c:type:`struct drm_device <drm_device>` mode_config field and never fails. Once done, mode configuration must be setup by initializing the following fields. @@ -181,8 +181,7 @@ Setting`_). The somewhat surprising part here is that properties are not directly instantiated on each object, but free-standing mode objects themselves, represented by :c:type:`struct drm_property <drm_property>`, which only specify the type and value range of a property. Any given property can be attached -multiple times to different objects using :c:func:`drm_object_attach_property() -<drm_object_attach_property>`. +multiple times to different objects using drm_object_attach_property(). .. kernel-doc:: include/drm/drm_mode_object.h :internal: @@ -260,7 +259,8 @@ Taken all together there's two consequences for the atomic design: drm_connector_state <drm_connector_state>` for connectors. These are the only objects with userspace-visible and settable state. For internal state drivers can subclass these structures through embeddeding, or add entirely new state - structures for their globally shared hardware functions. + structures for their globally shared hardware functions, see :c:type:`struct + drm_private_state<drm_private_state>`. - An atomic update is assembled and validated as an entirely free-standing pile of structures within the :c:type:`drm_atomic_state <drm_atomic_state>` @@ -269,6 +269,14 @@ Taken all together there's two consequences for the atomic design: to the driver and modeset objects. This way rolling back an update boils down to releasing memory and unreferencing objects like framebuffers. +Locking of atomic state structures is internally using :c:type:`struct +drm_modeset_lock <drm_modeset_lock>`. As a general rule the locking shouldn't be +exposed to drivers, instead the right locks should be automatically acquired by +any function that duplicates or peeks into a state, like e.g. +drm_atomic_get_crtc_state(). Locking only protects the software data +structure, ordering of committing state changes to hardware is sequenced using +:c:type:`struct drm_crtc_commit <drm_crtc_commit>`. + Read on in this chapter, and also in :ref:`drm_atomic_helper` for more detailed coverage of specific topics. @@ -479,6 +487,9 @@ Color Management Properties .. kernel-doc:: drivers/gpu/drm/drm_color_mgmt.c :export: +.. kernel-doc:: include/drm/drm_color_mgmt.h + :internal: + Tile Group Property ------------------- diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst index 59619296c84b..c77b32601260 100644 --- a/Documentation/gpu/drm-mm.rst +++ b/Documentation/gpu/drm-mm.rst @@ -149,19 +149,19 @@ struct :c:type:`struct drm_gem_object <drm_gem_object>`. To create a GEM object, a driver allocates memory for an instance of its specific GEM object type and initializes the embedded struct :c:type:`struct drm_gem_object <drm_gem_object>` with a call -to :c:func:`drm_gem_object_init()`. The function takes a pointer +to drm_gem_object_init(). The function takes a pointer to the DRM device, a pointer to the GEM object and the buffer object size in bytes. GEM uses shmem to allocate anonymous pageable memory. -:c:func:`drm_gem_object_init()` will create an shmfs file of the +drm_gem_object_init() will create an shmfs file of the requested size and store it into the struct :c:type:`struct drm_gem_object <drm_gem_object>` filp field. The memory is used as either main storage for the object when the graphics hardware uses system memory directly or as a backing store otherwise. Drivers are responsible for the actual physical pages allocation by -calling :c:func:`shmem_read_mapping_page_gfp()` for each page. +calling shmem_read_mapping_page_gfp() for each page. Note that they can decide to allocate pages when initializing the GEM object, or to delay allocation until the memory is needed (for instance when a page fault occurs as a result of a userspace memory access or @@ -170,20 +170,18 @@ when the driver needs to start a DMA transfer involving the memory). Anonymous pageable memory allocation is not always desired, for instance when the hardware requires physically contiguous system memory as is often the case in embedded devices. Drivers can create GEM objects with -no shmfs backing (called private GEM objects) by initializing them with -a call to :c:func:`drm_gem_private_object_init()` instead of -:c:func:`drm_gem_object_init()`. Storage for private GEM objects -must be managed by drivers. +no shmfs backing (called private GEM objects) by initializing them with a call +to drm_gem_private_object_init() instead of drm_gem_object_init(). Storage for +private GEM objects must be managed by drivers. GEM Objects Lifetime -------------------- All GEM objects are reference-counted by the GEM core. References can be -acquired and release by :c:func:`calling drm_gem_object_get()` and -:c:func:`drm_gem_object_put()` respectively. The caller must hold the -:c:type:`struct drm_device <drm_device>` struct_mutex lock when calling -:c:func:`drm_gem_object_get()`. As a convenience, GEM provides -:c:func:`drm_gem_object_put_unlocked()` functions that can be called without +acquired and release by calling drm_gem_object_get() and drm_gem_object_put() +respectively. The caller must hold the :c:type:`struct drm_device <drm_device>` +struct_mutex lock when calling drm_gem_object_get(). As a convenience, GEM +provides drm_gem_object_put_unlocked() functions that can be called without holding the lock. When the last reference to a GEM object is released the GEM core calls @@ -194,7 +192,7 @@ free the GEM object and all associated resources. void (\*gem_free_object) (struct drm_gem_object \*obj); Drivers are responsible for freeing all GEM object resources. This includes the resources created by the GEM core, which need to be released with -:c:func:`drm_gem_object_release()`. +drm_gem_object_release(). GEM Objects Naming ------------------ @@ -210,13 +208,11 @@ to the GEM object in other standard or driver-specific ioctls. Closing a DRM file handle frees all its GEM handles and dereferences the associated GEM objects. -To create a handle for a GEM object drivers call -:c:func:`drm_gem_handle_create()`. The function takes a pointer -to the DRM file and the GEM object and returns a locally unique handle. -When the handle is no longer needed drivers delete it with a call to -:c:func:`drm_gem_handle_delete()`. Finally the GEM object -associated with a handle can be retrieved by a call to -:c:func:`drm_gem_object_lookup()`. +To create a handle for a GEM object drivers call drm_gem_handle_create(). The +function takes a pointer to the DRM file and the GEM object and returns a +locally unique handle. When the handle is no longer needed drivers delete it +with a call to drm_gem_handle_delete(). Finally the GEM object associated with a +handle can be retrieved by a call to drm_gem_object_lookup(). Handles don't take ownership of GEM objects, they only take a reference to the object that will be dropped when the handle is destroyed. To @@ -258,7 +254,7 @@ The mmap system call can't be used directly to map GEM objects, as they don't have their own file handle. Two alternative methods currently co-exist to map GEM objects to userspace. The first method uses a driver-specific ioctl to perform the mapping operation, calling -:c:func:`do_mmap()` under the hood. This is often considered +do_mmap() under the hood. This is often considered dubious, seems to be discouraged for new GEM-enabled drivers, and will thus not be described here. @@ -267,23 +263,22 @@ The second method uses the mmap system call on the DRM file handle. void offset); DRM identifies the GEM object to be mapped by a fake offset passed through the mmap offset argument. Prior to being mapped, a GEM object must thus be associated with a fake offset. To do so, drivers -must call :c:func:`drm_gem_create_mmap_offset()` on the object. +must call drm_gem_create_mmap_offset() on the object. Once allocated, the fake offset value must be passed to the application in a driver-specific way and can then be used as the mmap offset argument. -The GEM core provides a helper method :c:func:`drm_gem_mmap()` to +The GEM core provides a helper method drm_gem_mmap() to handle object mapping. The method can be set directly as the mmap file operation handler. It will look up the GEM object based on the offset value and set the VMA operations to the :c:type:`struct drm_driver -<drm_driver>` gem_vm_ops field. Note that -:c:func:`drm_gem_mmap()` doesn't map memory to userspace, but -relies on the driver-provided fault handler to map pages individually. +<drm_driver>` gem_vm_ops field. Note that drm_gem_mmap() doesn't map memory to +userspace, but relies on the driver-provided fault handler to map pages +individually. -To use :c:func:`drm_gem_mmap()`, drivers must fill the struct -:c:type:`struct drm_driver <drm_driver>` gem_vm_ops field -with a pointer to VM operations. +To use drm_gem_mmap(), drivers must fill the struct :c:type:`struct drm_driver +<drm_driver>` gem_vm_ops field with a pointer to VM operations. The VM operations is a :c:type:`struct vm_operations_struct <vm_operations_struct>` made up of several fields, the more interesting ones being: @@ -298,9 +293,8 @@ made up of several fields, the more interesting ones being: The open and close operations must update the GEM object reference -count. Drivers can use the :c:func:`drm_gem_vm_open()` and -:c:func:`drm_gem_vm_close()` helper functions directly as open -and close handlers. +count. Drivers can use the drm_gem_vm_open() and drm_gem_vm_close() helper +functions directly as open and close handlers. The fault operation handler is responsible for mapping individual pages to userspace when a page fault occurs. Depending on the memory @@ -312,12 +306,12 @@ Drivers that want to map the GEM object upfront instead of handling page faults can implement their own mmap file operation handler. For platforms without MMU the GEM core provides a helper method -:c:func:`drm_gem_cma_get_unmapped_area`. The mmap() routines will call -this to get a proposed address for the mapping. +drm_gem_cma_get_unmapped_area(). The mmap() routines will call this to get a +proposed address for the mapping. -To use :c:func:`drm_gem_cma_get_unmapped_area`, drivers must fill the -struct :c:type:`struct file_operations <file_operations>` get_unmapped_area -field with a pointer on :c:func:`drm_gem_cma_get_unmapped_area`. +To use drm_gem_cma_get_unmapped_area(), drivers must fill the struct +:c:type:`struct file_operations <file_operations>` get_unmapped_area field with +a pointer on drm_gem_cma_get_unmapped_area(). More detailed information about get_unmapped_area can be found in Documentation/nommu-mmap.txt diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst index 94f90521f58c..56fec6ed1ad8 100644 --- a/Documentation/gpu/drm-uapi.rst +++ b/Documentation/gpu/drm-uapi.rst @@ -254,36 +254,45 @@ Validating changes with IGT There's a collection of tests that aims to cover the whole functionality of DRM drivers and that can be used to check that changes to DRM drivers or the core don't regress existing functionality. This test suite is called IGT and -its code can be found in https://cgit.freedesktop.org/drm/igt-gpu-tools/. +its code and instructions to build and run can be found in +https://gitlab.freedesktop.org/drm/igt-gpu-tools/. -To build IGT, start by installing its build dependencies. In Debian-based -systems:: +Using VKMS to test DRM API +-------------------------- - # apt-get build-dep intel-gpu-tools +VKMS is a software-only model of a KMS driver that is useful for testing +and for running compositors. VKMS aims to enable a virtual display without +the need for a hardware display capability. These characteristics made VKMS +a perfect tool for validating the DRM core behavior and also support the +compositor developer. VKMS makes it possible to test DRM functions in a +virtual machine without display, simplifying the validation of some of the +core changes. -And in Fedora-based systems:: +To Validate changes in DRM API with VKMS, start setting the kernel: make +sure to enable VKMS module; compile the kernel with the VKMS enabled and +install it in the target machine. VKMS can be run in a Virtual Machine +(QEMU, virtme or similar). It's recommended the use of KVM with the minimum +of 1GB of RAM and four cores. - # dnf builddep intel-gpu-tools +It's possible to run the IGT-tests in a VM in two ways: -Then clone the repository:: + 1. Use IGT inside a VM + 2. Use IGT from the host machine and write the results in a shared directory. - $ git clone git://anongit.freedesktop.org/drm/igt-gpu-tools +As follow, there is an example of using a VM with a shared directory with +the host machine to run igt-tests. As an example it's used virtme:: -Configure the build system and start the build:: + $ virtme-run --rwdir /path/for/shared_dir --kdir=path/for/kernel/directory --mods=auto - $ cd igt-gpu-tools && ./autogen.sh && make -j6 +Run the igt-tests in the guest machine, as example it's ran the 'kms_flip' +tests:: -Download the piglit dependency:: + $ /path/for/igt-gpu-tools/scripts/run-tests.sh -p -s -t "kms_flip.*" -v - $ ./scripts/run-tests.sh -d - -And run the tests:: - - $ ./scripts/run-tests.sh -t kms -t core -s - -run-tests.sh is a wrapper around piglit that will execute the tests matching -the -t options. A report in HTML format will be available in -./results/html/index.html. Results can be compared with piglit. +In this example, instead of build the igt_runner, Piglit is used +(-p option); it's created html summary of the tests results and it's saved +in the folder "igt-gpu-tools/results"; it's executed only the igt-tests +matching the -t option. Display CRC Support ------------------- diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst index d0947c5c4ab8..e539c42a3e78 100644 --- a/Documentation/gpu/i915.rst +++ b/Documentation/gpu/i915.rst @@ -466,9 +466,6 @@ GuC-based command submission .. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c :doc: GuC-based command submission -.. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c - :internal: - HuC --- .. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_huc.c diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 6792fa9b6b6b..bc869b23fc39 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -142,14 +142,14 @@ Contact: Daniel Vetter, respective driver maintainers Level: Advanced -Convert instances of dev_info/dev_err/dev_warn to their DRM_DEV_* equivalent ----------------------------------------------------------------------------- +Convert logging to drm_* functions with drm_device paramater +------------------------------------------------------------ For drivers which could have multiple instances, it is necessary to differentiate between which is which in the logs. Since DRM_INFO/WARN/ERROR don't do this, drivers used dev_info/warn/err to make this differentiation. We -now have DRM_DEV_* variants of the drm print macros, so we can start to convert -those drivers back to using drm-formwatted specific log messages. +now have drm_* variants of the drm print functions, so we can start to convert +those drivers back to using drm-formatted specific log messages. Before you start this conversion please contact the relevant maintainers to make sure your work will be merged - not everyone agrees that the DRM dmesg macros @@ -171,23 +171,40 @@ Contact: Maintainer of the driver you plan to convert Level: Intermediate -Convert drivers to use drm_fb_helper_fbdev_setup/teardown() ------------------------------------------------------------ +Convert drivers to use drm_fbdev_generic_setup() +------------------------------------------------ -Most drivers can use drm_fb_helper_fbdev_setup() except maybe: +Most drivers can use drm_fbdev_generic_setup(). Driver have to implement +atomic modesetting and GEM vmap support. Current generic fbdev emulation +expects the framebuffer in system memory (or system-like memory). -- amdgpu which has special logic to decide whether to call - drm_helper_disable_unused_functions() +Contact: Maintainer of the driver you plan to convert + +Level: Intermediate -- armada which isn't atomic and doesn't call - drm_helper_disable_unused_functions() +drm_framebuffer_funcs and drm_mode_config_funcs.fb_create cleanup +----------------------------------------------------------------- -- i915 which calls drm_fb_helper_initial_config() in a worker +A lot more drivers could be switched over to the drm_gem_framebuffer helpers. +Various hold-ups: -Drivers that use drm_framebuffer_remove() to clean up the fbdev framebuffer can -probably use drm_fb_helper_fbdev_teardown(). +- Need to switch over to the generic dirty tracking code using + drm_atomic_helper_dirtyfb first (e.g. qxl). -Contact: Maintainer of the driver you plan to convert +- Need to switch to drm_fbdev_generic_setup(), otherwise a lot of the custom fb + setup code can't be deleted. + +- Many drivers wrap drm_gem_fb_create() only to check for valid formats. For + atomic drivers we could check for valid formats by calling + drm_plane_check_pixel_format() against all planes, and pass if any plane + supports the format. For non-atomic that's not possible since like the format + list for the primary plane is fake and we'd therefor reject valid formats. + +- Many drivers subclass drm_framebuffer, we'd need a embedding compatible + version of the varios drm_gem_fb_create functions. Maybe called + drm_gem_fb_create/_with_dirty/_with_funcs as needed. + +Contact: Daniel Vetter Level: Intermediate @@ -328,8 +345,8 @@ drm_fb_helper tasks these igt tests need to be fixed: kms_fbcon_fbt@psr and kms_fbcon_fbt@psr-suspend. -- The max connector argument for drm_fb_helper_init() and - drm_fb_helper_fbdev_setup() isn't used anymore and can be removed. +- The max connector argument for drm_fb_helper_init() isn't used anymore and + can be removed. - The helper doesn't keep an array of connectors anymore so these can be removed: drm_fb_helper_single_add_all_connectors(), @@ -351,6 +368,23 @@ connector register/unregister fixes Level: Intermediate +Remove load/unload callbacks from all non-DRIVER_LEGACY drivers +--------------------------------------------------------------- + +The load/unload callbacks in struct &drm_driver are very much midlayers, plus +for historical reasons they get the ordering wrong (and we can't fix that) +between setting up the &drm_driver structure and calling drm_dev_register(). + +- Rework drivers to no longer use the load/unload callbacks, directly coding the + load/unload sequence into the driver's probe function. + +- Once all non-DRIVER_LEGACY drivers are converted, disallow the load/unload + callbacks for all modern drivers. + +Contact: Daniel Vetter + +Level: Intermediate + Core refactorings ================= |