3 files changed, 277 insertions, 0 deletions
diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S
new file mode 100644
index 000000000000..e63f6a43abb1
--- /dev/null
+++ b/arch/arc/kernel/head.S
@@ -0,0 +1,78 @@
+/*
+ * ARC CPU startup Code
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Vineetg: Dec 2007
+ *  -Check if we are running on Simulator or on real hardware
+ *      to skip certain things during boot on simulator
+ */
+
+#include <asm/asm-offsets.h>
+#include <asm/entry.h>
+#include <linux/linkage.h>
+#include <asm/arcregs.h>
+
+	.cpu A7
+
+	.section .init.text, "ax",@progbits
+	.type stext, @function
+	.globl stext
+stext:
+	;-------------------------------------------------------------------
+	; Don't clobber r0-r4 yet. It might have bootloader provided info
+	;-------------------------------------------------------------------
+
+	; Clear BSS before updating any globals
+	; XXX: use ZOL here
+	mov	r5, __bss_start
+	mov	r6, __bss_stop
+1:
+	st.ab   0, [r5,4]
+	brlt    r5, r6, 1b
+
+#ifdef CONFIG_CMDLINE_UBOOT
+	; support for bootloader provided cmdline
+	;    If cmdline passed by u-boot, then
+	;    r0 = 1  (because ATAGS parsing, now retired, used to use 0)
+	;    r1 = magic number (board identity)
+	;    r2 = addr of cmdline string (somewhere in memory/flash)
+
+	brne	r0, 1, .Lother_bootup_chores	; u-boot didn't pass cmdline
+	breq	r2, 0, .Lother_bootup_chores	; or cmdline is NULL
+
+	mov	r5, @command_line
+1:
+	ldb.ab  r6, [r2, 1]
+	breq    r6, 0, .Lother_bootup_chores
+	b.d     1b
+	stb.ab  r6, [r5, 1]
+#endif
+
+.Lother_bootup_chores:
+
+	; Identify if running on ISS vs Silicon
+	; 	IDENTITY Reg [ 3  2  1  0 ]
+	;	(chip-id)      ^^^^^		==> 0xffff for ISS
+	lr	r0, [identity]
+	lsr	r3, r0, 16
+	cmp	r3, 0xffff
+	mov.z	r4, 0
+	mov.nz	r4, 1
+	st	r4, [@running_on_hw]
+
+	; setup "current" tsk and optionally cache it in dedicated r25
+	mov	r9, @init_task
+	SET_CURR_TASK_ON_CPU  r9, r0	; r9 = tsk, r0 = scratch
+
+	; setup stack (fp, sp)
+	mov	fp, 0
+
+	; tsk->thread_info is really a PAGE, whose bottom hoists stack
+	GET_TSK_STACK_BASE r9, sp	; r9 = tsk, sp = stack base(output)
+
+	j	start_kernel	; "C" entry point
diff --git a/arch/arc/kernel/reset.c b/arch/arc/kernel/reset.c
new file mode 100644
index 000000000000..e227a2b1c943
--- /dev/null
+++ b/arch/arc/kernel/reset.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/reboot.h>
+#include <linux/pm.h>
+
+void machine_halt(void)
+{
+	/* Halt the processor */
+	__asm__ __volatile__("flag  1\n");
+}
+
+void machine_restart(char *__unused)
+{
+	/* Soft reset : jump to reset vector */
+	pr_info("Put your restart handler here\n");
+	machine_halt();
+}
+
+void machine_power_off(void)
+{
+	/* FIXME ::  power off ??? */
+	machine_halt();
+}
+
+void (*pm_power_off) (void) = NULL;
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
new file mode 100644
index 000000000000..82ac20603398
--- /dev/null
+++ b/arch/arc/kernel/setup.c
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/seq_file.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/root_dev.h>
+#include <linux/console.h>
+#include <linux/module.h>
+#include <linux/cpu.h>
+#include <asm/arcregs.h>
+#include <asm/tlb.h>
+#include <asm/cache.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/irq.h>
+#include <asm/arcregs.h>
+
+#define FIX_PTR(x)  __asm__ __volatile__(";" : "+r"(x))
+
+int running_on_hw = 1;	/* vs. on ISS */
+
+char __initdata command_line[COMMAND_LINE_SIZE];
+
+struct task_struct *_current_task[NR_CPUS];	/* For stack switching */
+
+struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
+
+void __init read_arc_build_cfg_regs(void)
+{
+	read_decode_mmu_bcr();
+	read_decode_cache_bcr();
+}
+
+/*
+ * Initialize and setup the processor core
+ * This is called by all the CPUs thus should not do special case stuff
+ *    such as only for boot CPU etc
+ */
+
+void __init setup_processor(void)
+{
+	read_arc_build_cfg_regs();
+	arc_init_IRQ();
+	arc_mmu_init();
+	arc_cache_init();
+}
+
+void __init __attribute__((weak)) arc_platform_early_init(void)
+{
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+#ifdef CONFIG_CMDLINE_UBOOT
+	/* Make sure that a whitespace is inserted before */
+	strlcat(command_line, " ", sizeof(command_line));
+#endif
+	/*
+	 * Append .config cmdline to base command line, which might already
+	 * contain u-boot "bootargs" (handled by head.S, if so configured)
+	 */
+	strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line));
+
+	/* Save unparsed command line copy for /proc/cmdline */
+	strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+	*cmdline_p = command_line;
+
+	/* To force early parsing of things like mem=xxx */
+	parse_early_param();
+
+	/* Platform/board specific: e.g. early console registration */
+	arc_platform_early_init();
+
+	setup_processor();
+
+	setup_arch_memory();
+
+	/* Can be issue if someone passes cmd line arg "ro"
+	 * But that is unlikely so keeping it as it is
+	 */
+	root_mountflags &= ~MS_RDONLY;
+
+	console_verbose();
+
+#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
+	conswitchp = &dummy_con;
+#endif
+
+}
+
+/*
+ *  Get CPU information for use by the procfs.
+ */
+
+#define cpu_to_ptr(c)	((void *)(0xFFFF0000 | (unsigned int)(c)))
+#define ptr_to_cpu(p)	(~0xFFFF0000UL & (unsigned int)(p))
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	char *str;
+	int cpu_id = ptr_to_cpu(v);
+
+	str = (char *)__get_free_page(GFP_TEMPORARY);
+	if (!str)
+		goto done;
+
+	seq_printf(m, "ARC700 #%d\n", cpu_id);
+
+	seq_printf(m, "Bogo MIPS : \t%lu.%02lu\n",
+		   loops_per_jiffy / (500000 / HZ),
+		   (loops_per_jiffy / (5000 / HZ)) % 100);
+
+	free_page((unsigned long)str);
+done:
+	seq_printf(m, "\n\n");
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	/*
+	 * Callback returns cpu-id to iterator for show routine, NULL to stop.
+	 * However since NULL is also a valid cpu-id (0), we use a round-about
+	 * way to pass it w/o having to kmalloc/free a 2 byte string.
+	 * Encode cpu-id as 0xFFcccc, which is decoded by show routine.
+	 */
+	return *pos < num_possible_cpus() ? cpu_to_ptr(*pos) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_cpuinfo
+};
+
+static DEFINE_PER_CPU(struct cpu, cpu_topology);
+
+static int __init topology_init(void)
+{
+	int cpu;
+
+	for_each_present_cpu(cpu)
+	    register_cpu(&per_cpu(cpu_topology, cpu), cpu);
+
+	return 0;
+}
+
+subsys_initcall(topology_init);