diff options
Diffstat (limited to 'arch/arc')
-rw-r--r-- | arch/arc/Kconfig | 16 | ||||
-rw-r--r-- | arch/arc/boot/dts/axs10x_mb.dtsi | 8 | ||||
-rw-r--r-- | arch/arc/configs/axs103_defconfig | 1 | ||||
-rw-r--r-- | arch/arc/configs/axs103_smp_defconfig | 1 | ||||
-rw-r--r-- | arch/arc/include/asm/fb.h | 19 | ||||
-rw-r--r-- | arch/arc/include/asm/io.h | 27 | ||||
-rw-r--r-- | arch/arc/include/asm/irqflags-arcv2.h | 36 | ||||
-rw-r--r-- | arch/arc/include/asm/mmzone.h | 43 | ||||
-rw-r--r-- | arch/arc/include/asm/page.h | 15 | ||||
-rw-r--r-- | arch/arc/include/asm/pgtable.h | 13 | ||||
-rw-r--r-- | arch/arc/kernel/entry-arcv2.S | 10 | ||||
-rw-r--r-- | arch/arc/kernel/entry-compact.S | 3 | ||||
-rw-r--r-- | arch/arc/mm/init.c | 58 |
13 files changed, 204 insertions, 46 deletions
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 208aae071b37..a8767430df7d 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -35,8 +35,10 @@ config ARC select NO_BOOTMEM select OF select OF_EARLY_FLATTREE + select OF_RESERVED_MEM select PERF_USE_VMALLOC select HAVE_DEBUG_STACKOVERFLOW + select HAVE_GENERIC_DMA_COHERENT config MIGHT_HAVE_PCI bool @@ -56,6 +58,9 @@ config GENERIC_CSUM config RWSEM_GENERIC_SPINLOCK def_bool y +config ARCH_DISCONTIGMEM_ENABLE + def_bool y + config ARCH_FLATMEM_ENABLE def_bool y @@ -345,6 +350,15 @@ config ARC_HUGEPAGE_16M endchoice +config NODES_SHIFT + int "Maximum NUMA Nodes (as a power of 2)" + default "1" if !DISCONTIGMEM + default "2" if DISCONTIGMEM + depends on NEED_MULTIPLE_NODES + ---help--- + Accessing memory beyond 1GB (with or w/o PAE) requires 2 memory + zones. + if ISA_ARCOMPACT config ARC_COMPACT_IRQ_LEVELS @@ -453,6 +467,7 @@ config LINUX_LINK_BASE config HIGHMEM bool "High Memory Support" + select DISCONTIGMEM help With ARC 2G:2G address split, only upper 2G is directly addressable by kernel. Enable this to potentially allow access to rest of 2G and PAE @@ -593,7 +608,6 @@ config PCI_SYSCALL def_bool PCI source "drivers/pci/Kconfig" -source "drivers/pci/pcie/Kconfig" endmenu diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi index ab5d5701e11d..44a578c10732 100644 --- a/arch/arc/boot/dts/axs10x_mb.dtsi +++ b/arch/arc/boot/dts/axs10x_mb.dtsi @@ -47,14 +47,6 @@ clocks = <&apbclk>; clock-names = "stmmaceth"; max-speed = <100>; - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; }; ehci@0x40000 { diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig index f8b396c9aedb..491b3b5f22bd 100644 --- a/arch/arc/configs/axs103_defconfig +++ b/arch/arc/configs/axs103_defconfig @@ -42,6 +42,7 @@ CONFIG_DEVTMPFS=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_BLK_DEV_LOOP=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig index 56128ea2b748..b25ee73b2e79 100644 --- a/arch/arc/configs/axs103_smp_defconfig +++ b/arch/arc/configs/axs103_smp_defconfig @@ -43,6 +43,7 @@ CONFIG_DEVTMPFS=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_BLK_DEV_LOOP=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y diff --git a/arch/arc/include/asm/fb.h b/arch/arc/include/asm/fb.h new file mode 100644 index 000000000000..bd3f68c9ddfc --- /dev/null +++ b/arch/arc/include/asm/fb.h @@ -0,0 +1,19 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ + +#include <linux/fb.h> +#include <linux/fs.h> +#include <asm/page.h> + +static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, + unsigned long off) +{ + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); +} + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h index 17f85c9c73cf..c22b181e8206 100644 --- a/arch/arc/include/asm/io.h +++ b/arch/arc/include/asm/io.h @@ -13,6 +13,15 @@ #include <asm/byteorder.h> #include <asm/page.h> +#ifdef CONFIG_ISA_ARCV2 +#include <asm/barrier.h> +#define __iormb() rmb() +#define __iowmb() wmb() +#else +#define __iormb() do { } while (0) +#define __iowmb() do { } while (0) +#endif + extern void __iomem *ioremap(phys_addr_t paddr, unsigned long size); extern void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size, unsigned long flags); @@ -31,6 +40,15 @@ extern void iounmap(const void __iomem *addr); #define ioremap_wc(phy, sz) ioremap(phy, sz) #define ioremap_wt(phy, sz) ioremap(phy, sz) +/* + * io{read,write}{16,32}be() macros + */ +#define ioread16be(p) ({ u16 __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; }) +#define ioread32be(p) ({ u32 __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; }) + +#define iowrite16be(v,p) ({ __iowmb(); __raw_writew((__force u16)cpu_to_be16(v), p); }) +#define iowrite32be(v,p) ({ __iowmb(); __raw_writel((__force u32)cpu_to_be32(v), p); }) + /* Change struct page to physical address */ #define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) @@ -108,15 +126,6 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr) } -#ifdef CONFIG_ISA_ARCV2 -#include <asm/barrier.h> -#define __iormb() rmb() -#define __iowmb() wmb() -#else -#define __iormb() do { } while (0) -#define __iowmb() do { } while (0) -#endif - /* * MMIO can also get buffered/optimized in micro-arch, so barriers needed * Based on ARM model for the typical use case diff --git a/arch/arc/include/asm/irqflags-arcv2.h b/arch/arc/include/asm/irqflags-arcv2.h index 37c2f751eebf..d1ec7f6b31e0 100644 --- a/arch/arc/include/asm/irqflags-arcv2.h +++ b/arch/arc/include/asm/irqflags-arcv2.h @@ -18,6 +18,12 @@ #define STATUS_AD_MASK (1<<STATUS_AD_BIT) #define STATUS_IE_MASK (1<<STATUS_IE_BIT) +/* status32 Bits as encoded/expected by CLRI/SETI */ +#define CLRI_STATUS_IE_BIT 4 + +#define CLRI_STATUS_E_MASK 0xF +#define CLRI_STATUS_IE_MASK (1 << CLRI_STATUS_IE_BIT) + #define AUX_USER_SP 0x00D #define AUX_IRQ_CTRL 0x00E #define AUX_IRQ_ACT 0x043 /* Active Intr across all levels */ @@ -100,6 +106,13 @@ static inline long arch_local_save_flags(void) : : "memory"); + /* To be compatible with irq_save()/irq_restore() + * encode the irq bits as expected by CLRI/SETI + * (this was needed to make CONFIG_TRACE_IRQFLAGS work) + */ + temp = (1 << 5) | + ((!!(temp & STATUS_IE_MASK)) << CLRI_STATUS_IE_BIT) | + (temp & CLRI_STATUS_E_MASK); return temp; } @@ -108,7 +121,7 @@ static inline long arch_local_save_flags(void) */ static inline int arch_irqs_disabled_flags(unsigned long flags) { - return !(flags & (STATUS_IE_MASK)); + return !(flags & CLRI_STATUS_IE_MASK); } static inline int arch_irqs_disabled(void) @@ -128,11 +141,32 @@ static inline void arc_softirq_clear(int irq) #else +#ifdef CONFIG_TRACE_IRQFLAGS + +.macro TRACE_ASM_IRQ_DISABLE + bl trace_hardirqs_off +.endm + +.macro TRACE_ASM_IRQ_ENABLE + bl trace_hardirqs_on +.endm + +#else + +.macro TRACE_ASM_IRQ_DISABLE +.endm + +.macro TRACE_ASM_IRQ_ENABLE +.endm + +#endif .macro IRQ_DISABLE scratch clri + TRACE_ASM_IRQ_DISABLE .endm .macro IRQ_ENABLE scratch + TRACE_ASM_IRQ_ENABLE seti .endm diff --git a/arch/arc/include/asm/mmzone.h b/arch/arc/include/asm/mmzone.h new file mode 100644 index 000000000000..8e97136413d9 --- /dev/null +++ b/arch/arc/include/asm/mmzone.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _ASM_ARC_MMZONE_H +#define _ASM_ARC_MMZONE_H + +#ifdef CONFIG_DISCONTIGMEM + +extern struct pglist_data node_data[]; +#define NODE_DATA(nid) (&node_data[nid]) + +static inline int pfn_to_nid(unsigned long pfn) +{ + int is_end_low = 1; + + if (IS_ENABLED(CONFIG_ARC_HAS_PAE40)) + is_end_low = pfn <= virt_to_pfn(0xFFFFFFFFUL); + + /* + * node 0: lowmem: 0x8000_0000 to 0xFFFF_FFFF + * node 1: HIGHMEM w/o PAE40: 0x0 to 0x7FFF_FFFF + * HIGHMEM with PAE40: 0x1_0000_0000 to ... + */ + if (pfn >= ARCH_PFN_OFFSET && is_end_low) + return 0; + + return 1; +} + +static inline int pfn_valid(unsigned long pfn) +{ + int nid = pfn_to_nid(pfn); + + return (pfn <= node_end_pfn(nid)); +} +#endif /* CONFIG_DISCONTIGMEM */ + +#endif diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h index 36da89e2c853..0d53854884d0 100644 --- a/arch/arc/include/asm/page.h +++ b/arch/arc/include/asm/page.h @@ -72,11 +72,20 @@ typedef unsigned long pgprot_t; typedef pte_t * pgtable_t; +/* + * Use virt_to_pfn with caution: + * If used in pte or paddr related macros, it could cause truncation + * in PAE40 builds + * As a rule of thumb, only use it in helpers starting with virt_ + * You have been warned ! + */ #define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) #define ARCH_PFN_OFFSET virt_to_pfn(CONFIG_LINUX_LINK_BASE) +#ifdef CONFIG_FLATMEM #define pfn_valid(pfn) (((pfn) - ARCH_PFN_OFFSET) < max_mapnr) +#endif /* * __pa, __va, virt_to_page (ALERT: deprecated, don't use them) @@ -85,12 +94,10 @@ typedef pte_t * pgtable_t; * virt here means link-address/program-address as embedded in object code. * And for ARC, link-addr = physical address */ -#define __pa(vaddr) ((unsigned long)vaddr) +#define __pa(vaddr) ((unsigned long)(vaddr)) #define __va(paddr) ((void *)((unsigned long)(paddr))) -#define virt_to_page(kaddr) \ - (mem_map + virt_to_pfn((kaddr) - CONFIG_LINUX_LINK_BASE)) - +#define virt_to_page(kaddr) pfn_to_page(virt_to_pfn(kaddr)) #define virt_addr_valid(kaddr) pfn_valid(virt_to_pfn(kaddr)) /* Default Permissions for stack/heaps pages (Non Executable) */ diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index 7d6c93e63adf..10d4b8b8e545 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -278,14 +278,13 @@ static inline void pmd_set(pmd_t *pmdp, pte_t *ptep) #define pmd_present(x) (pmd_val(x)) #define pmd_clear(xp) do { pmd_val(*(xp)) = 0; } while (0) -#define pte_page(pte) \ - (mem_map + virt_to_pfn(pte_val(pte) - CONFIG_LINUX_LINK_BASE)) - +#define pte_page(pte) pfn_to_page(pte_pfn(pte)) #define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot) -#define pte_pfn(pte) virt_to_pfn(pte_val(pte)) -#define pfn_pte(pfn, prot) (__pte(((pte_t)(pfn) << PAGE_SHIFT) | \ - pgprot_val(prot))) -#define __pte_index(addr) (virt_to_pfn(addr) & (PTRS_PER_PTE - 1)) +#define pfn_pte(pfn, prot) (__pte(((pte_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))) + +/* Don't use virt_to_pfn for macros below: could cause truncations for PAE40*/ +#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) +#define __pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) /* * pte_offset gets a @ptr to PMD entry (PGD in our 2-tier paging system) diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S index c1264607bbff..7a1c124ff021 100644 --- a/arch/arc/kernel/entry-arcv2.S +++ b/arch/arc/kernel/entry-arcv2.S @@ -69,8 +69,11 @@ ENTRY(handle_interrupt) clri ; To make status32.IE agree with CPU internal state - lr r0, [ICAUSE] +#ifdef CONFIG_TRACE_IRQFLAGS + TRACE_ASM_IRQ_DISABLE +#endif + lr r0, [ICAUSE] mov blink, ret_from_exception b.d arch_do_IRQ @@ -169,6 +172,11 @@ END(EV_TLBProtV) .Lrestore_regs: + # Interrpts are actually disabled from this point on, but will get + # reenabled after we return from interrupt/exception. + # But irq tracer needs to be told now... + TRACE_ASM_IRQ_ENABLE + ld r0, [sp, PT_status32] ; U/K mode at time of entry lr r10, [AUX_IRQ_ACT] diff --git a/arch/arc/kernel/entry-compact.S b/arch/arc/kernel/entry-compact.S index 431433929189..0cb0abaa0479 100644 --- a/arch/arc/kernel/entry-compact.S +++ b/arch/arc/kernel/entry-compact.S @@ -341,6 +341,9 @@ END(call_do_page_fault) .Lrestore_regs: + # Interrpts are actually disabled from this point on, but will get + # reenabled after we return from interrupt/exception. + # But irq tracer needs to be told now... TRACE_ASM_IRQ_ENABLE lr r10, [status32] diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c index 7d2c4fbf4f22..8be930394750 100644 --- a/arch/arc/mm/init.c +++ b/arch/arc/mm/init.c @@ -13,6 +13,7 @@ #ifdef CONFIG_BLK_DEV_INITRD #include <linux/initrd.h> #endif +#include <linux/of_fdt.h> #include <linux/swap.h> #include <linux/module.h> #include <linux/highmem.h> @@ -29,11 +30,16 @@ static const unsigned long low_mem_start = CONFIG_LINUX_LINK_BASE; static unsigned long low_mem_sz; #ifdef CONFIG_HIGHMEM -static unsigned long min_high_pfn; +static unsigned long min_high_pfn, max_high_pfn; static u64 high_mem_start; static u64 high_mem_sz; #endif +#ifdef CONFIG_DISCONTIGMEM +struct pglist_data node_data[MAX_NUMNODES] __read_mostly; +EXPORT_SYMBOL(node_data); +#endif + /* User can over-ride above with "mem=nnn[KkMm]" in cmdline */ static int __init setup_mem_sz(char *str) { @@ -108,13 +114,11 @@ void __init setup_arch_memory(void) /* Last usable page of low mem */ max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz); -#ifdef CONFIG_HIGHMEM - min_high_pfn = PFN_DOWN(high_mem_start); - max_pfn = PFN_DOWN(high_mem_start + high_mem_sz); +#ifdef CONFIG_FLATMEM + /* pfn_valid() uses this */ + max_mapnr = max_low_pfn - min_low_pfn; #endif - max_mapnr = max_pfn - min_low_pfn; - /*------------- bootmem allocator setup -----------------------*/ /* @@ -128,7 +132,7 @@ void __init setup_arch_memory(void) * the crash */ - memblock_add(low_mem_start, low_mem_sz); + memblock_add_node(low_mem_start, low_mem_sz, 0); memblock_reserve(low_mem_start, __pa(_end) - low_mem_start); #ifdef CONFIG_BLK_DEV_INITRD @@ -136,6 +140,9 @@ void __init setup_arch_memory(void) memblock_reserve(__pa(initrd_start), initrd_end - initrd_start); #endif + early_init_fdt_reserve_self(); + early_init_fdt_scan_reserved_mem(); + memblock_dump_all(); /*----------------- node/zones setup --------------------------*/ @@ -145,13 +152,6 @@ void __init setup_arch_memory(void) zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn; zones_holes[ZONE_NORMAL] = 0; -#ifdef CONFIG_HIGHMEM - zones_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn; - - /* This handles the peripheral address space hole */ - zones_holes[ZONE_HIGHMEM] = min_high_pfn - max_low_pfn; -#endif - /* * We can't use the helper free_area_init(zones[]) because it uses * PAGE_OFFSET to compute the @min_low_pfn which would be wrong @@ -164,6 +164,34 @@ void __init setup_arch_memory(void) zones_holes); /* holes */ #ifdef CONFIG_HIGHMEM + /* + * Populate a new node with highmem + * + * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based) + * than addresses in normal ala low memory (0x8000_0000 based). + * Even with PAE, the huge peripheral space hole would waste a lot of + * mem with single mem_map[]. This warrants a mem_map per region design. + * Thus HIGHMEM on ARC is imlemented with DISCONTIGMEM. + * + * DISCONTIGMEM in turns requires multiple nodes. node 0 above is + * populated with normal memory zone while node 1 only has highmem + */ + node_set_online(1); + + min_high_pfn = PFN_DOWN(high_mem_start); + max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz); + + zones_size[ZONE_NORMAL] = 0; + zones_holes[ZONE_NORMAL] = 0; + + zones_size[ZONE_HIGHMEM] = max_high_pfn - min_high_pfn; + zones_holes[ZONE_HIGHMEM] = 0; + + free_area_init_node(1, /* node-id */ + zones_size, /* num pages per zone */ + min_high_pfn, /* first pfn of node */ + zones_holes); /* holes */ + high_memory = (void *)(min_high_pfn << PAGE_SHIFT); kmap_init(); #endif @@ -181,7 +209,7 @@ void __init mem_init(void) unsigned long tmp; reset_all_zones_managed_pages(); - for (tmp = min_high_pfn; tmp < max_pfn; tmp++) + for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++) free_highmem_page(pfn_to_page(tmp)); #endif |