diff options
Diffstat (limited to 'arch/arm/Kconfig')
| -rw-r--r-- | arch/arm/Kconfig | 61 |
1 files changed, 33 insertions, 28 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 67874b82a4ed..482ba91e73a7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -36,7 +36,6 @@ config ARM select HAVE_GENERIC_HARDIRQS select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) select HAVE_IDE if PCI || ISA || PCMCIA - select HAVE_IRQ_WORK select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZMA select HAVE_KERNEL_LZO @@ -261,7 +260,8 @@ config MMU # choice prompt "ARM system type" - default ARCH_MULTIPLATFORM + default ARCH_VERSATILE if !MMU + default ARCH_MULTIPLATFORM if MMU config ARCH_MULTIPLATFORM bool "Allow multiple platforms to be selected" @@ -344,10 +344,10 @@ config ARCH_BCM2835 select ARM_ERRATA_411920 select ARM_TIMER_SP804 select CLKDEV_LOOKUP + select CLKSRC_OF select COMMON_CLK select CPU_V6 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select MULTI_IRQ_HANDLER select PINCTRL select PINCTRL_BCM2835 @@ -642,9 +642,9 @@ config ARCH_TEGRA select ARCH_HAS_CPUFREQ select CLKDEV_LOOKUP select CLKSRC_MMIO + select CLKSRC_OF select COMMON_CLK select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 @@ -698,6 +698,7 @@ config ARCH_SHMOBILE select MULTI_IRQ_HANDLER select NEED_MACH_MEMORY_H select NO_IOPORT + select PINCTRL select PM_GENERIC_DOMAINS if PM select SPARSE_IRQ help @@ -744,7 +745,6 @@ config ARCH_S3C24XX select ARCH_HAS_CPUFREQ select ARCH_USES_GETTIMEOFFSET select CLKDEV_LOOKUP - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -787,7 +787,6 @@ config ARCH_S5P64X0 select CLKSRC_MMIO select CPU_V6 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -802,7 +801,6 @@ config ARCH_S5PC100 select ARCH_USES_GETTIMEOFFSET select CLKDEV_LOOKUP select CPU_V7 - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -820,7 +818,6 @@ config ARCH_S5PV210 select CLKSRC_MMIO select CPU_V7 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -838,7 +835,6 @@ config ARCH_EXYNOS select CLKDEV_LOOKUP select CPU_V7 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -873,7 +869,6 @@ config ARCH_U300 select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_TCM select SPARSE_IRQ help @@ -957,7 +952,6 @@ config ARCH_VT8500_SINGLE select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select MULTI_IRQ_HANDLER select SPARSE_IRQ @@ -1086,17 +1080,12 @@ source "arch/arm/mach-realview/Kconfig" source "arch/arm/mach-sa1100/Kconfig" source "arch/arm/plat-samsung/Kconfig" -source "arch/arm/plat-s3c24xx/Kconfig" source "arch/arm/mach-socfpga/Kconfig" source "arch/arm/plat-spear/Kconfig" source "arch/arm/mach-s3c24xx/Kconfig" -if ARCH_S3C24XX -source "arch/arm/mach-s3c2412/Kconfig" -source "arch/arm/mach-s3c2440/Kconfig" -endif if ARCH_S3C64XX source "arch/arm/mach-s3c64xx/Kconfig" @@ -1450,6 +1439,10 @@ config ISA_DMA bool select ISA_DMA_API +config ARCH_NO_VIRT_TO_BUS + def_bool y + depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK + # Select ISA DMA interface config ISA_DMA_API bool @@ -1531,7 +1524,6 @@ config SMP config SMP_ON_UP bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)" - depends on EXPERIMENTAL depends on SMP && !XIP_KERNEL default y help @@ -1620,6 +1612,16 @@ config HOTPLUG_CPU Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. +config ARM_PSCI + bool "Support for the ARM Power State Coordination Interface (PSCI)" + depends on CPU_V7 + help + Say Y here if you want Linux to communicate with system firmware + implementing the PSCI specification for CPU-centric power + management operations described in ARM document number ARM DEN + 0022A ("Power State Coordination Interface System Software on + ARM processors"). + config LOCAL_TIMERS bool "Use local timer interrupts" depends on SMP @@ -1637,7 +1639,7 @@ config ARCH_NR_GPIO default 355 if ARCH_U8500 default 264 if MACH_H4700 default 512 if SOC_OMAP5 - default 288 if ARCH_VT8500 + default 288 if ARCH_VT8500 || ARCH_SUNXI default 0 help Maximum number of GPIOs in the system. @@ -1655,6 +1657,9 @@ config HZ default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE default 100 +config SCHED_HRTICK + def_bool HIGH_RES_TIMERS + config THUMB2_KERNEL bool "Compile the kernel in Thumb-2 mode" depends on CPU_V7 && !CPU_V6 && !CPU_V6K @@ -1719,7 +1724,7 @@ config AEABI config OABI_COMPAT bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" - depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL + depends on AEABI && !THUMB2_KERNEL default y help This option preserves the old syscall interface along with the @@ -1843,7 +1848,6 @@ config SECCOMP config CC_STACKPROTECTOR bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" - depends on EXPERIMENTAL help This option turns on the -fstack-protector GCC feature. This feature puts, at the beginning of functions, a canary value on @@ -1860,7 +1864,7 @@ config XEN_DOM0 config XEN bool "Xen guest support on ARM (EXPERIMENTAL)" - depends on EXPERIMENTAL && ARM && OF + depends on ARM && OF depends on CPU_V7 && !CPU_V6 help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. @@ -1929,7 +1933,7 @@ config ZBOOT_ROM choice prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)" - depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL + depends on ZBOOT_ROM && ARCH_SH7372 default ZBOOT_ROM_NONE help Include experimental SD/MMC loading code in the ROM-able zImage. @@ -1958,7 +1962,7 @@ endchoice config ARM_APPENDED_DTB bool "Use appended device tree blob to zImage (EXPERIMENTAL)" - depends on OF && !ZBOOT_ROM && EXPERIMENTAL + depends on OF && !ZBOOT_ROM help With this option, the boot code will look for a device tree binary (DTB) appended to zImage @@ -2076,7 +2080,7 @@ config XIP_PHYS_ADDR config KEXEC bool "Kexec system call (EXPERIMENTAL)" - depends on EXPERIMENTAL && (!SMP || HOTPLUG_CPU) + depends on (!SMP || HOTPLUG_CPU) help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot @@ -2098,7 +2102,6 @@ config ATAGS_PROC config CRASH_DUMP bool "Build kdump crash kernel (EXPERIMENTAL)" - depends on EXPERIMENTAL help Generate crash dump after being started by kexec. This should be normally only set in special crash dump kernels which are @@ -2165,7 +2168,7 @@ config CPU_FREQ_S3C config CPU_FREQ_S3C24XX bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" - depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL + depends on ARCH_S3C24XX && CPU_FREQ select CPU_FREQ_S3C help This enables the CPUfreq driver for the Samsung S3C24XX family @@ -2177,7 +2180,7 @@ config CPU_FREQ_S3C24XX config CPU_FREQ_S3C24XX_PLL bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" - depends on CPU_FREQ_S3C24XX && EXPERIMENTAL + depends on CPU_FREQ_S3C24XX help Compile in support for changing the PLL frequency from the S3C24XX series CPUfreq driver. The PLL takes time to settle @@ -2240,7 +2243,7 @@ config FPE_NWFPE_XP config FPE_FASTFPE bool "FastFPE math emulation (EXPERIMENTAL)" - depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL + depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 ---help--- Say Y here to include the FAST floating point emulator in the kernel. This is an experimental much faster emulator which now also has full @@ -2322,3 +2325,5 @@ source "security/Kconfig" source "crypto/Kconfig" source "lib/Kconfig" + +source "arch/arm/kvm/Kconfig" |