1 files changed, 68 insertions, 66 deletions
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 6403acdbb75f..2353b1f13704 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -30,85 +30,87 @@
 	};
 
 	soc {
-		serial@d0012000 {
-			clock-frequency = <200000000>;
-			status = "okay";
-		};
-		sata@d00a0000 {
-			nr-ports = <2>;
-			status = "okay";
-		};
-
-		mdio {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <200000000>;
+				status = "okay";
 			};
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
 			};
-		};
 
-		ethernet@d0070000 {
-			status = "okay";
-			phy = <&phy0>;
-			phy-mode = "rgmii-id";
-		};
-		ethernet@d0074000 {
-			status = "okay";
-			phy = <&phy1>;
-			phy-mode = "rgmii-id";
-		};
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
 
-		mvsdio@d00d4000 {
-			pinctrl-0 = <&sdio_pins1>;
-			pinctrl-names = "default";
-			/*
-			 * This device is disabled by default, because
-			 * using the SD card connector requires
-			 * changing the default CON40 connector
-			 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
-			 * different connector
-			 * "DB-88F6710_MPP_RGMII_SD_Jumper".
-			 */
-			status = "disabled";
-			/* No CD or WP GPIOs */
-		};
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
 
-		usb@d0050000 {
-			status = "okay";
-		};
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
 
-		usb@d0051000 {
-			status = "okay";
-		};
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins1>;
+				pinctrl-names = "default";
+				/*
+				 * This device is disabled by default, because
+				 * using the SD card connector requires
+				 * changing the default CON40 connector
+				 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
+				 * different connector
+				 * "DB-88F6710_MPP_RGMII_SD_Jumper".
+				 */
+				status = "disabled";
+				/* No CD or WP GPIOs */
+			};
 
-		spi0: spi@d0010600 {
-			status = "okay";
+			usb@50000 {
+				status = "okay";
+			};
 
-			spi-flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mx25l25635e";
-				reg = <0>; /* Chip select 0 */
-				spi-max-frequency = <50000000>;
+			usb@51000 {
+				status = "okay";
 			};
-		};
 
-		pcie-controller {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * both standard PCIe slots and mini-PCIe
-			 * slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
+			spi0: spi@10600 {
 				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "mx25l25635e";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <50000000>;
+				};
 			};
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
+
+			pcie-controller {
 				status = "okay";
+				/*
+				 * The two PCIe units are accessible through
+				 * both standard PCIe slots and mini-PCIe
+				 * slots on the board.
+				 */
+				pcie@1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
+				pcie@2,0 {
+					/* Port 1, Lane 0 */
+					status = "okay";
+				};
 			};
 		};
 	};