diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 110 |
1 files changed, 3 insertions, 107 deletions
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 7da74e6f46d9..7272edd85a49 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ @@ -17,12 +17,6 @@ compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl", "fsl,imx6dl"; - /* Will be filled by the bootloader */ - memory@10000000 { - device_type = "memory"; - reg = <0x10000000 0>; - }; - aliases { i2c0 = &i2c2; i2c1 = &i2c3; @@ -44,67 +38,6 @@ clock-frequency = <16000000>; clock-output-names = "clk16m"; }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - wakeup { - label = "Wake-Up"; - gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; - - lcd_display: disp0 { - compatible = "fsl,imx-parallel-display"; - #address-cells = <1>; - #size-cells = <0>; - interface-pix-fmt = "bgr666"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_lcdif>; - status = "okay"; - - port@0 { - reg = <0>; - - lcd_display_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - port@1 { - reg = <1>; - - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; - }; - - panel: panel { - /* - * edt,et057090dhu: EDT 5.7" LCD TFT - * edt,et070080dh6: EDT 7.0" LCD TFT - */ - compatible = "edt,et057090dhu"; - backlight = <&backlight>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; -}; - -&backlight { - brightness-levels = <0 127 191 223 239 247 251 255>; - default-brightness-level = <1>; - status = "okay"; }; /* Colibri SSP */ @@ -113,40 +46,21 @@ mcp251x0: mcp251x@0 { compatible = "microchip,mcp2515"; - reg = <0>; clocks = <&clk16m>; interrupt-parent = <&gpio3>; interrupts = <27 0x2>; + reg = <0>; spi-max-frequency = <10000000>; status = "okay"; }; }; -&hdmi { - status = "okay"; -}; - /* * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */ &i2c3 { status = "okay"; - /* - * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, - * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms - */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pcap_1>; - reg = <0x4a>; - interrupt-parent = <&gpio1>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ - reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 */ - status = "disabled"; - }; - /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { compatible = "st,m41t0"; @@ -162,24 +76,6 @@ &pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6 &pinctrl_usbh_oc_1 &pinctrl_usbc_id_1 >; - - pinctrl_pcap_1: pcap1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* SODIMM 28 */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SODIMM 30 */ - >; - }; - - pinctrl_mxt_ts: mxttsgrp { - fsl,pins = < - MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x130b0 /* SODIMM 107 */ - MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x130b0 /* SODIMM 106 */ - >; - }; -}; - -&ipu1_di0_disp0 { - remote-endpoint = <&lcd_display_in>; }; &pwm1 { |