diff options
Diffstat (limited to 'arch/arm/boot/dts')
23 files changed, 384 insertions, 15 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f4f5aeaf3298..7af4e3289a89 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -229,6 +229,9 @@ dtb-$(CONFIG_ARCH_HIX5HD2) += \ dtb-$(CONFIG_ARCH_INTEGRATOR) += \ integratorap.dtb \ integratorcp.dtb +dtb-$(CONFIG_ARCH_IXP4XX) += \ + intel-ixp42x-linksys-nslu2.dtb \ + intel-ixp43x-gateworks-gw2358.dtb dtb-$(CONFIG_ARCH_KEYSTONE) += \ keystone-k2hk-evm.dtb \ keystone-k2l-evm.dtb \ diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi index fb01fa6e4224..c40a7af6ebee 100644 --- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi +++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi @@ -88,6 +88,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; enable-active-high; }; @@ -99,6 +100,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; enable-active-high; regulator-always-on; }; @@ -216,7 +218,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-duration = <10>; phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; phy-supply = <®_enet>; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 65c184bb8fb0..d9de49efa802 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -92,7 +92,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index adc9455e42c7..37c63402157b 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -171,7 +171,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts index d8ccb533b6b7..84b30bd6908f 100644 --- a/arch/arm/boot/dts/imx6q-marsboard.dts +++ b/arch/arm/boot/dts/imx6q-marsboard.dts @@ -110,7 +110,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 2ce8399a10ba..bfff87ce2e1f 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -98,7 +98,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi index 1ebf29f43a24..4738c3c1ab50 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi @@ -51,7 +51,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-duration = <10>; phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 1280de50a984..f3404dd10537 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -292,7 +292,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index a0705066ccba..185fb17a3500 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -202,7 +202,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi index 4ccb7afc4b35..6d7f6b9035bc 100644 --- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi @@ -53,7 +53,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-duration = <2>; phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index b7d5fb421404..50d9a989e06a 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -224,7 +224,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index b0ee324afe58..315044ccd65f 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -75,7 +75,7 @@ &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy1>; fsl,magic-packet; status = "okay"; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index 08ede56c3f10..f6972deb5e39 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -191,7 +191,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; phy-supply = <®_enet_3v3>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy1>; phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi index 3fd595a71202..6f50ebf31a0a 100644 --- a/arch/arm/boot/dts/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/imx7d-pico.dtsi @@ -92,7 +92,7 @@ <&clks IMX7D_ENET1_TIME_ROOT_CLK>; assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; assigned-clock-rates = <0>, <100000000>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy0>; fsl,magic-packet; phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts new file mode 100644 index 000000000000..8fcd95805ff4 --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Linksys NSLU2 + */ + +/dts-v1/; + +#include "intel-ixp42x.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives)"; + compatible = "linksys,nslu2", "intel,ixp42x"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 32 MB SDRAM */ + device_type = "memory"; + reg = <0x00000000 0x2000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait"; + stdout-path = "uart0:115200n8"; + }; + + aliases { + serial0 = &uart0; + }; + + leds { + compatible = "gpio-leds"; + led-status { + label = "nslu2:red:status"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + led-ready { + label = "nslu2:green:ready"; + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + led-disk-1 { + label = "nslu2:green:disk-1"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led-disk-2 { + label = "nslu2:green:disk-2"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button-power { + wakeup-source; + linux,code = <KEY_POWER>; + label = "power"; + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + }; + button-reset { + wakeup-source; + linux,code = <KEY_ESC>; + label = "reset"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + }; + + i2c { + compatible = "i2c-gpio"; + sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@6f { + compatible = "xicor,x1205"; + reg = <0x6f>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + timeout-ms = <5000>; + }; + + /* The first 16MB region on the expansion bus */ + flash@50000000 { + compatible = "intel,ixp4xx-flash", "cfi-flash"; + bank-width = <2>; + /* + * 8 MB of Flash in 0x20000 byte blocks + * mapped in at 0x50000000 + */ + reg = <0x50000000 0x800000>; + + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0x7e0000 */ + fis-index-block = <0x3f>; + }; + }; +}; diff --git a/arch/arm/boot/dts/intel-ixp42x.dtsi b/arch/arm/boot/dts/intel-ixp42x.dtsi new file mode 100644 index 000000000000..a9622ca850cc --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp42x.dtsi @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Intel XScale Network Processors + * in the IXP 42x series. This series has 32 interrupts. + */ +#include "intel-ixp4xx.dtsi" + +/ { + soc { + interrupt-controller@c8003000 { + compatible = "intel,ixp42x-interrupt"; + }; + + /* + * This is the USB Device Mode (UDC) controller, which is used + * to present the IXP4xx as a device on a USB bus. + */ + usb@c800b000 { + compatible = "intel,ixp4xx-udc"; + reg = <0xc800b000 0x1000>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts new file mode 100644 index 000000000000..ba1163a1e1e7 --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Gateworks IXP43x-based Cambria GW2358 + */ + +/dts-v1/; + +#include "intel-ixp43x.dtsi" + +/ { + model = "Gateworks Cambria GW2358"; + compatible = "gateworks,gw2358", "intel,ixp43x"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 128 MB SDRAM */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait"; + stdout-path = "uart0:115200n8"; + }; + + aliases { + serial0 = &uart0; + }; + + leds { + compatible = "gpio-leds"; + led-user { + label = "gw2358:green:LED"; + gpios = <&pld1 0 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + + i2c { + compatible = "i2c-gpio"; + sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + #address-cells = <1>; + #size-cells = <0>; + + hwmon@28 { + compatible = "adi,ad7418"; + reg = <0x28>; + }; + rtc: ds1672@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; + eeprom@51 { + compatible = "atmel,24c08"; + reg = <0x51>; + pagesize = <16>; + size = <1024>; + read-only; + }; + pld0: pld@56 { + compatible = "gateworks,pld-gpio"; + reg = <0x56>; + gpio-controller; + #gpio-cells = <2>; + }; + /* This PLD just handles the LED and user button */ + pld1: pld@57 { + compatible = "gateworks,pld-gpio"; + reg = <0x57>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + flash@50000000 { + compatible = "intel,ixp4xx-flash", "cfi-flash"; + bank-width = <2>; + /* + * 32 MB of Flash in 0x20000 byte blocks + * mapped in at 0x50000000 + */ + reg = <0x50000000 0x2000000>; + + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0x1fe0000 */ + fis-index-block = <0xff>; + }; + }; +}; diff --git a/arch/arm/boot/dts/intel-ixp43x.dtsi b/arch/arm/boot/dts/intel-ixp43x.dtsi new file mode 100644 index 000000000000..494fb2ff57a0 --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp43x.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Intel XScale Network Processors + * in the IXP 43x series. This series has 64 interrupts and adds a few more + * peripherals over the 42x series. + */ +#include "intel-ixp4xx.dtsi" + +/ { + soc { + interrupt-controller@c8003000 { + compatible = "intel,ixp43x-interrupt"; + }; + }; +}; diff --git a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi new file mode 100644 index 000000000000..f8cd506659dc --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Intel XScale Network Processors + * in the IXP45x and IXP46x series. This series has 64 interrupts and adds a + * few more peripherals over the 42x and 43x series so this extends the + * basic IXP4xx DTSI. + */ +#include "intel-ixp4xx.dtsi" + +/ { + soc { + interrupt-controller@c8003000 { + compatible = "intel,ixp43x-interrupt"; + }; + + /* + * This is the USB Device Mode (UDC) controller, which is used + * to present the IXP4xx as a device on a USB bus. + */ + usb@c800b000 { + compatible = "intel,ixp4xx-udc"; + reg = <0xc800b000 0x1000>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c@c8011000 { + compatible = "intel,ixp4xx-i2c"; + reg = <0xc8011000 0x18>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel-ixp4xx.dtsi new file mode 100644 index 000000000000..d4a09584f417 --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp4xx.dtsi @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Intel XScale Network Processors + * in the IXP 4xx series. + */ +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + interrupt-parent = <&intcon>; + + qmgr: queue-manager@60000000 { + compatible = "intel,ixp4xx-ahb-queue-manager"; + reg = <0x60000000 0x4000>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>; + }; + + uart0: serial@c8000000 { + compatible = "intel,xscale-uart"; + reg = <0xc8000000 0x1000>; + /* + * The reg-offset and reg-shift is a side effect + * of running the platform in big endian mode. + */ + reg-offset = <3>; + reg-shift = <2>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <14745600>; + no-loopback-test; + }; + + gpio0: gpio@c8004000 { + compatible = "intel,ixp4xx-gpio"; + reg = <0xc8004000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + intcon: interrupt-controller@c8003000 { + /* + * Note: no compatible string. The subvariant of the + * chip needs to define what version it is. The + * location of the interrupt controller is fixed in + * memory across all variants. + */ + reg = <0xc8003000 0x100>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + timer@c8005000 { + compatible = "intel,ixp4xx-timer"; + reg = <0xc8005000 0x100>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + }; + + npe@c8006000 { + compatible = "intel,ixp4xx-network-processing-engine"; + reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index 97e1fb7ea932..9b1fe99d55b1 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -145,7 +145,7 @@ }; &enet0 { - tbi-handle = <&tbi1>; + tbi-handle = <&tbi0>; phy-handle = <&sgmii_phy2>; phy-connection-type = "sgmii"; status = "okay"; @@ -225,6 +225,13 @@ sgmii_phy2: ethernet-phy@2 { reg = <0x2>; }; + tbi0: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&mdio1 { tbi1: tbi-phy@1f { reg = <0x1f>; device_type = "tbi-phy"; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index b10ff5877b4c..fe6eecf01da1 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -729,7 +729,7 @@ }; mdio0: mdio@2d24000 { - compatible = "gianfar"; + compatible = "fsl,etsec2-mdio"; device_type = "mdio"; #address-cells = <1>; #size-cells = <0>; @@ -737,6 +737,15 @@ <0x0 0x2d10030 0x0 0x4>; }; + mdio1: mdio@2d64000 { + compatible = "fsl,etsec2-mdio"; + device_type = "mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2d64000 0x0 0x4000>, + <0x0 0x2d50030 0x0 0x4>; + }; + ptp_clock@2d10e00 { compatible = "fsl,etsec-ptp"; reg = <0x0 0x2d10e00 0x0 0xb0>; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 43fe215e83ea..14a7d0288b45 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -169,6 +169,8 @@ clock-names = "ahb", "mod"; resets = <&ccu RST_BUS_NAND>; reset-names = "ahb"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; |