diff options
Diffstat (limited to 'arch/arm/boot')
| -rw-r--r-- | arch/arm/boot/compressed/Makefile | 5 | ||||
| -rw-r--r-- | arch/arm/boot/compressed/fdt_check_mem_start.c | 131 | ||||
| -rw-r--r-- | arch/arm/boot/compressed/head.S | 45 |
3 files changed, 171 insertions, 10 deletions
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index fb521efcc6c2..fd94e27ba4fa 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -87,10 +87,13 @@ libfdt_objs := fdt_rw.o fdt_ro.o fdt_wip.o fdt.o ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y) OBJS += $(libfdt_objs) atags_to_fdt.o endif +ifeq ($(CONFIG_USE_OF),y) +OBJS += $(libfdt_objs) fdt_check_mem_start.o +endif # -fstack-protector-strong triggers protection checks in this code, # but it is being used too early to link to meaningful stack_chk logic. -$(foreach o, $(libfdt_objs) atags_to_fdt.o, \ +$(foreach o, $(libfdt_objs) atags_to_fdt.o fdt_check_mem_start.o, \ $(eval CFLAGS_$(o) := -I $(srctree)/scripts/dtc/libfdt -fno-stack-protector)) # These were previously generated C files. When you are building the kernel diff --git a/arch/arm/boot/compressed/fdt_check_mem_start.c b/arch/arm/boot/compressed/fdt_check_mem_start.c new file mode 100644 index 000000000000..62450d824c3c --- /dev/null +++ b/arch/arm/boot/compressed/fdt_check_mem_start.c @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <linux/kernel.h> +#include <linux/libfdt.h> +#include <linux/sizes.h> + +static const void *get_prop(const void *fdt, const char *node_path, + const char *property, int minlen) +{ + const void *prop; + int offset, len; + + offset = fdt_path_offset(fdt, node_path); + if (offset < 0) + return NULL; + + prop = fdt_getprop(fdt, offset, property, &len); + if (!prop || len < minlen) + return NULL; + + return prop; +} + +static uint32_t get_cells(const void *fdt, const char *name) +{ + const fdt32_t *prop = get_prop(fdt, "/", name, sizeof(fdt32_t)); + + if (!prop) { + /* default */ + return 1; + } + + return fdt32_ld(prop); +} + +static uint64_t get_val(const fdt32_t *cells, uint32_t ncells) +{ + uint64_t r; + + r = fdt32_ld(cells); + if (ncells > 1) + r = (r << 32) | fdt32_ld(cells + 1); + + return r; +} + +/* + * Check the start of physical memory + * + * Traditionally, the start address of physical memory is obtained by masking + * the program counter. However, this does require that this address is a + * multiple of 128 MiB, precluding booting Linux on platforms where this + * requirement is not fulfilled. + * Hence validate the calculated address against the memory information in the + * DTB, and, if out-of-range, replace it by the real start address. + * To preserve backwards compatibility (systems reserving a block of memory + * at the start of physical memory, kdump, ...), the traditional method is + * always used if it yields a valid address. + * + * Return value: start address of physical memory to use + */ +uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt) +{ + uint32_t addr_cells, size_cells, base; + uint32_t fdt_mem_start = 0xffffffff; + const fdt32_t *reg, *endp; + uint64_t size, end; + const char *type; + int offset, len; + + if (!fdt) + return mem_start; + + if (fdt_magic(fdt) != FDT_MAGIC) + return mem_start; + + /* There may be multiple cells on LPAE platforms */ + addr_cells = get_cells(fdt, "#address-cells"); + size_cells = get_cells(fdt, "#size-cells"); + if (addr_cells > 2 || size_cells > 2) + return mem_start; + + /* Walk all memory nodes and regions */ + for (offset = fdt_next_node(fdt, -1, NULL); offset >= 0; + offset = fdt_next_node(fdt, offset, NULL)) { + type = fdt_getprop(fdt, offset, "device_type", NULL); + if (!type || strcmp(type, "memory")) + continue; + + reg = fdt_getprop(fdt, offset, "linux,usable-memory", &len); + if (!reg) + reg = fdt_getprop(fdt, offset, "reg", &len); + if (!reg) + continue; + + for (endp = reg + (len / sizeof(fdt32_t)); + endp - reg >= addr_cells + size_cells; + reg += addr_cells + size_cells) { + size = get_val(reg + addr_cells, size_cells); + if (!size) + continue; + + if (addr_cells > 1 && fdt32_ld(reg)) { + /* Outside 32-bit address space, skipping */ + continue; + } + + base = fdt32_ld(reg + addr_cells - 1); + end = base + size; + if (mem_start >= base && mem_start < end) { + /* Calculated address is valid, use it */ + return mem_start; + } + + if (base < fdt_mem_start) + fdt_mem_start = base; + } + } + + if (fdt_mem_start == 0xffffffff) { + /* No usable memory found, falling back to default */ + return mem_start; + } + + /* + * The calculated address is not usable. + * Use the lowest usable physical memory address from the DTB instead, + * and make sure this is a multiple of 2 MiB for phys/virt patching. + */ + return round_up(fdt_mem_start, SZ_2M); +} diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index d9cce7238a36..b1cb1972361b 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -174,10 +174,7 @@ .macro be32tocpu, val, tmp #ifndef __ARMEB__ /* convert to little endian */ - eor \tmp, \val, \val, ror #16 - bic \tmp, \tmp, #0x00ff0000 - mov \val, \val, ror #8 - eor \val, \val, \tmp, lsr #8 + rev_l \val, \tmp #endif .endm @@ -282,10 +279,40 @@ not_angel: * are already placing their zImage in (eg) the top 64MB * of this range. */ - mov r4, pc - and r4, r4, #0xf8000000 + mov r0, pc + and r0, r0, #0xf8000000 +#ifdef CONFIG_USE_OF + adr r1, LC1 +#ifdef CONFIG_ARM_APPENDED_DTB + /* + * Look for an appended DTB. If found, we cannot use it to + * validate the calculated start of physical memory, as its + * memory nodes may need to be augmented by ATAGS stored at + * an offset from the same start of physical memory. + */ + ldr r2, [r1, #4] @ get &_edata + add r2, r2, r1 @ relocate it + ldr r2, [r2] @ get DTB signature + ldr r3, =OF_DT_MAGIC + cmp r2, r3 @ do we have a DTB there? + beq 1f @ if yes, skip validation +#endif /* CONFIG_ARM_APPENDED_DTB */ + + /* + * Make sure we have some stack before calling C code. + * No GOT fixup has occurred yet, but none of the code we're + * about to call uses any global variables. + */ + ldr sp, [r1] @ get stack location + add sp, sp, r1 @ apply relocation + + /* Validate calculated start against passed DTB */ + mov r1, r8 + bl fdt_check_mem_start +1: +#endif /* CONFIG_USE_OF */ /* Determine final kernel image address. */ - add r4, r4, #TEXT_OFFSET + add r4, r0, #TEXT_OFFSET #else ldr r4, =zreladdr #endif @@ -1164,9 +1191,9 @@ __armv4_mmu_cache_off: __armv7_mmu_cache_off: mrc p15, 0, r0, c1, c0 #ifdef CONFIG_MMU - bic r0, r0, #0x000d + bic r0, r0, #0x0005 #else - bic r0, r0, #0x000c + bic r0, r0, #0x0004 #endif mcr p15, 0, r0, c1, c0 @ turn MMU and cache off mov r0, #0 |