diff options
Diffstat (limited to 'arch/arm/mach-imx/clk-imx6sl.c')
| -rw-r--r-- | arch/arm/mach-imx/clk-imx6sl.c | 159 |
1 files changed, 137 insertions, 22 deletions
diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c index 4c86f3035205..f7073c0782fb 100644 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -1,5 +1,5 @@ /* - * Copyright 2013 Freescale Semiconductor, Inc. + * Copyright 2013-2014 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -18,27 +18,43 @@ #include "clk.h" #include "common.h" -static const char const *step_sels[] = { "osc", "pll2_pfd2", }; -static const char const *pll1_sw_sels[] = { "pll1_sys", "step", }; -static const char const *ocram_alt_sels[] = { "pll2_pfd2", "pll3_pfd1", }; -static const char const *ocram_sels[] = { "periph", "ocram_alt_sels", }; -static const char const *pre_periph_sels[] = { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", }; -static const char const *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; -static const char const *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; -static const char const *periph_sels[] = { "pre_periph_sel", "periph_clk2_podf", }; -static const char const *periph2_sels[] = { "pre_periph2_sel", "periph2_clk2_podf", }; -static const char const *csi_lcdif_sels[] = { "mmdc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", }; -static const char const *usdhc_sels[] = { "pll2_pfd2", "pll2_pfd0", }; -static const char const *ssi_sels[] = { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", }; -static const char const *perclk_sels[] = { "ipg", "osc", }; -static const char const *epdc_pxp_sels[] = { "mmdc", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd1", }; -static const char const *gpu2d_ovg_sels[] = { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", }; -static const char const *gpu2d_sels[] = { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", }; -static const char const *lcdif_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", }; -static const char const *epdc_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", }; -static const char const *audio_sels[] = { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", }; -static const char const *ecspi_sels[] = { "pll3_60m", "osc", }; -static const char const *uart_sels[] = { "pll3_80m", "osc", }; +#define CCSR 0xc +#define BM_CCSR_PLL1_SW_CLK_SEL (1 << 2) +#define CACRR 0x10 +#define CDHIPR 0x48 +#define BM_CDHIPR_ARM_PODF_BUSY (1 << 16) +#define ARM_WAIT_DIV_396M 2 +#define ARM_WAIT_DIV_792M 4 +#define ARM_WAIT_DIV_996M 6 + +#define PLL_ARM 0x0 +#define BM_PLL_ARM_DIV_SELECT (0x7f << 0) +#define BM_PLL_ARM_POWERDOWN (1 << 12) +#define BM_PLL_ARM_ENABLE (1 << 13) +#define BM_PLL_ARM_LOCK (1 << 31) +#define PLL_ARM_DIV_792M 66 + +static const char *step_sels[] = { "osc", "pll2_pfd2", }; +static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; +static const char *ocram_alt_sels[] = { "pll2_pfd2", "pll3_pfd1", }; +static const char *ocram_sels[] = { "periph", "ocram_alt_sels", }; +static const char *pre_periph_sels[] = { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; +static const char *periph_sels[] = { "pre_periph_sel", "periph_clk2_podf", }; +static const char *periph2_sels[] = { "pre_periph2_sel", "periph2_clk2_podf", }; +static const char *csi_lcdif_sels[] = { "mmdc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", }; +static const char *usdhc_sels[] = { "pll2_pfd2", "pll2_pfd0", }; +static const char *ssi_sels[] = { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", }; +static const char *perclk_sels[] = { "ipg", "osc", }; +static const char *epdc_pxp_sels[] = { "mmdc", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd1", }; +static const char *gpu2d_ovg_sels[] = { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", }; +static const char *gpu2d_sels[] = { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", }; +static const char *lcdif_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", }; +static const char *epdc_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", }; +static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", }; +static const char *ecspi_sels[] = { "pll3_60m", "osc", }; +static const char *uart_sels[] = { "pll3_80m", "osc", }; static struct clk_div_table clk_enet_ref_table[] = { { .val = 0, .div = 20, }, @@ -65,6 +81,89 @@ static struct clk_div_table video_div_table[] = { static struct clk *clks[IMX6SL_CLK_END]; static struct clk_onecell_data clk_data; +static void __iomem *ccm_base; +static void __iomem *anatop_base; + +static const u32 clks_init_on[] __initconst = { + IMX6SL_CLK_IPG, IMX6SL_CLK_ARM, IMX6SL_CLK_MMDC_ROOT, +}; + +/* + * ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken + * during WAIT mode entry process could cause cache memory + * corruption. + * + * Software workaround: + * To prevent this issue from occurring, software should ensure that the + * ARM to IPG clock ratio is less than 12:5 (that is < 2.4x), before + * entering WAIT mode. + * + * This function will set the ARM clk to max value within the 12:5 limit. + * As IPG clock is fixed at 66MHz(so ARM freq must not exceed 158.4MHz), + * ARM freq are one of below setpoints: 396MHz, 792MHz and 996MHz, since + * the clk APIs can NOT be called in idle thread(may cause kernel schedule + * as there is sleep function in PLL wait function), so here we just slow + * down ARM to below freq according to previous freq: + * + * run mode wait mode + * 396MHz -> 132MHz; + * 792MHz -> 158.4MHz; + * 996MHz -> 142.3MHz; + */ +static int imx6sl_get_arm_divider_for_wait(void) +{ + if (readl_relaxed(ccm_base + CCSR) & BM_CCSR_PLL1_SW_CLK_SEL) { + return ARM_WAIT_DIV_396M; + } else { + if ((readl_relaxed(anatop_base + PLL_ARM) & + BM_PLL_ARM_DIV_SELECT) == PLL_ARM_DIV_792M) + return ARM_WAIT_DIV_792M; + else + return ARM_WAIT_DIV_996M; + } +} + +static void imx6sl_enable_pll_arm(bool enable) +{ + static u32 saved_pll_arm; + u32 val; + + if (enable) { + saved_pll_arm = val = readl_relaxed(anatop_base + PLL_ARM); + val |= BM_PLL_ARM_ENABLE; + val &= ~BM_PLL_ARM_POWERDOWN; + writel_relaxed(val, anatop_base + PLL_ARM); + while (!(__raw_readl(anatop_base + PLL_ARM) & BM_PLL_ARM_LOCK)) + ; + } else { + writel_relaxed(saved_pll_arm, anatop_base + PLL_ARM); + } +} + +void imx6sl_set_wait_clk(bool enter) +{ + static unsigned long saved_arm_div; + int arm_div_for_wait = imx6sl_get_arm_divider_for_wait(); + + /* + * According to hardware design, arm podf change need + * PLL1 clock enabled. + */ + if (arm_div_for_wait == ARM_WAIT_DIV_396M) + imx6sl_enable_pll_arm(true); + + if (enter) { + saved_arm_div = readl_relaxed(ccm_base + CACRR); + writel_relaxed(arm_div_for_wait, ccm_base + CACRR); + } else { + writel_relaxed(saved_arm_div, ccm_base + CACRR); + } + while (__raw_readl(ccm_base + CDHIPR) & BM_CDHIPR_ARM_PODF_BUSY) + ; + + if (arm_div_for_wait == ARM_WAIT_DIV_396M) + imx6sl_enable_pll_arm(false); +} static void __init imx6sl_clocks_init(struct device_node *ccm_node) { @@ -72,6 +171,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) void __iomem *base; int irq; int i; + int ret; clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); clks[IMX6SL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0); @@ -80,6 +180,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-anatop"); base = of_iomap(np, 0); WARN_ON(!base); + anatop_base = base; /* type name parent base div_mask */ clks[IMX6SL_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); @@ -127,6 +228,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) np = ccm_node; base = of_iomap(np, 0); WARN_ON(!base); + ccm_base = base; /* Reuse imx6q pm code */ imx6q_pm_set_ccm_base(base); @@ -258,6 +360,19 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) clk_register_clkdev(clks[IMX6SL_CLK_GPT], "ipg", "imx-gpt.0"); clk_register_clkdev(clks[IMX6SL_CLK_GPT_SERIAL], "per", "imx-gpt.0"); + /* Ensure the AHB clk is at 132MHz. */ + ret = clk_set_rate(clks[IMX6SL_CLK_AHB], 132000000); + if (ret) + pr_warn("%s: failed to set AHB clock rate %d!\n", + __func__, ret); + + /* + * Make sure those always on clocks are enabled to maintain the correct + * usecount and enabling/disabling of parent PLLs. + */ + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) + clk_prepare_enable(clks[clks_init_on[i]]); + if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]); clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]); |