diff options
Diffstat (limited to 'arch/arm/mach-omap1')
| -rw-r--r-- | arch/arm/mach-omap1/Kconfig | 3 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/Makefile | 4 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-ams-delta.c | 9 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-fsample.c | 15 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-h2.c | 15 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-h3.c | 9 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-htcherald.c | 9 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-innovator.c | 11 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-nokia770.c | 19 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-osk.c | 14 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-palmte.c | 10 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-palmtt.c | 10 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-palmz71.c | 10 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-perseus2.c | 15 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-sx1.c | 16 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/devices.c | 9 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/lcd_dma.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/mcbsp.c | 14 |
18 files changed, 51 insertions, 143 deletions
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 4f8d66f044e7..922ab0dc2bcd 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -37,7 +37,6 @@ comment "OMAP Board Type" config MACH_OMAP_INNOVATOR bool "TI Innovator" depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) - select OMAP_MCBSP help TI OMAP 1510 or 1610 Innovator board support. Say Y here if you have such a board. @@ -45,7 +44,6 @@ config MACH_OMAP_INNOVATOR config MACH_OMAP_H2 bool "TI H2 Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX - select OMAP_MCBSP help TI OMAP 1610/1611B H2 board support. Say Y here if you have such a board. @@ -72,7 +70,6 @@ config MACH_HERALD config MACH_OMAP_OSK bool "TI OSK Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX - select OMAP_MCBSP help TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here if you have such a board. diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 11c85cd2731a..9923f92b5450 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -6,7 +6,9 @@ obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o -obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o +ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) +obj-y += mcbsp.o +endif obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 88909cc0b254..e0e8245f3c9f 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -20,6 +20,7 @@ #include <linux/platform_device.h> #include <linux/serial_8250.h> #include <linux/export.h> +#include <linux/omapfb.h> #include <media/soc_camera.h> @@ -169,10 +170,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = { .pins[0] = 2, }; -static struct omap_board_config_kernel ams_delta_config[] __initdata = { - { OMAP_TAG_LCD, &ams_delta_lcd_config }, -}; - static struct resource ams_delta_nand_resources[] = { [0] = { .start = OMAP1_MPUIO_BASE, @@ -302,8 +299,6 @@ static void __init ams_delta_init(void) omap_cfg_reg(J19_1610_CAM_D6); omap_cfg_reg(J18_1610_CAM_D7); - omap_board_config = ams_delta_config; - omap_board_config_size = ARRAY_SIZE(ams_delta_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); @@ -321,6 +316,8 @@ static void __init ams_delta_init(void) ams_delta_init_fiq(); omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); + + omapfb_set_lcd_config(&ams_delta_lcd_config); } static struct plat_serial8250_port ams_delta_modem_ports[] = { diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 0b9464b41212..7afaf3c5bdc6 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -21,6 +21,7 @@ #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -273,27 +274,17 @@ static struct platform_device kp_device = { .resource = kp_resources, }; -static struct platform_device lcd_device = { - .name = "lcd_p2", - .id = -1, -}; - static struct platform_device *devices[] __initdata = { &nor_device, &nand_device, &smc91x_device, &kp_device, - &lcd_device, }; static struct omap_lcd_config fsample_lcd_config = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel fsample_config[] __initdata = { - { OMAP_TAG_LCD, &fsample_lcd_config }, -}; - static void __init omap_fsample_init(void) { /* Early, board-dependent init */ @@ -352,10 +343,10 @@ static void __init omap_fsample_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - omap_board_config = fsample_config; - omap_board_config_size = ARRAY_SIZE(fsample_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); + + omapfb_set_lcd_config(&fsample_lcd_config); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 00ad6b22d60a..af2be8c12c07 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -30,6 +30,7 @@ #include <linux/input.h> #include <linux/i2c/tps65010.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> #include <mach/hardware.h> @@ -325,18 +326,12 @@ static struct platform_device h2_irda_device = { .resource = h2_irda_resources, }; -static struct platform_device h2_lcd_device = { - .name = "lcd_h2", - .id = -1, -}; - static struct platform_device *h2_devices[] __initdata = { &h2_nor_device, &h2_nand_device, &h2_smc91x_device, &h2_irda_device, &h2_kp_device, - &h2_lcd_device, }; static void __init h2_init_smc91x(void) @@ -391,10 +386,6 @@ static struct omap_lcd_config h2_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel h2_config[] __initdata = { - { OMAP_TAG_LCD, &h2_lcd_config }, -}; - static void __init h2_init(void) { h2_init_smc91x(); @@ -438,13 +429,13 @@ static void __init h2_init(void) omap_cfg_reg(N19_1610_KBR5); platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); - omap_board_config = h2_config; - omap_board_config_size = ARRAY_SIZE(h2_config); omap_serial_init(); omap_register_i2c_bus(1, 100, h2_i2c_board_info, ARRAY_SIZE(h2_i2c_board_info)); omap1_usb_init(&h2_usb_config); h2_mmc_init(); + + omapfb_set_lcd_config(&h2_lcd_config); } MACHINE_START(OMAP_H2, "TI-H2") diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 4a7f25149703..7cfd25b90735 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -30,6 +30,7 @@ #include <linux/spi/spi.h> #include <linux/i2c/tps65010.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> #include <asm/setup.h> #include <asm/page.h> @@ -370,10 +371,6 @@ static struct omap_lcd_config h3_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel h3_config[] __initdata = { - { OMAP_TAG_LCD, &h3_lcd_config }, -}; - static struct i2c_board_info __initdata h3_i2c_board_info[] = { { I2C_BOARD_INFO("tps65013", 0x48), @@ -426,13 +423,13 @@ static void __init h3_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); spi_register_board_info(h3_spi_board_info, ARRAY_SIZE(h3_spi_board_info)); - omap_board_config = h3_config; - omap_board_config_size = ARRAY_SIZE(h3_config); omap_serial_init(); omap_register_i2c_bus(1, 100, h3_i2c_board_info, ARRAY_SIZE(h3_i2c_board_info)); omap1_usb_init(&h3_usb_config); h3_mmc_init(); + + omapfb_set_lcd_config(&h3_lcd_config); } MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 731cc3db7ab3..af2afcf24f75 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -36,6 +36,7 @@ #include <linux/leds.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/omapfb.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -398,10 +399,6 @@ static struct omap_lcd_config htcherald_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel htcherald_config[] __initdata = { - { OMAP_TAG_LCD, &htcherald_lcd_config }, -}; - static struct platform_device lcd_device = { .name = "lcd_htcherald", .id = -1, @@ -580,8 +577,6 @@ static void __init htcherald_init(void) printk(KERN_INFO "HTC Herald init.\n"); /* Do board initialization before we register all the devices */ - omap_board_config = htcherald_config; - omap_board_config_size = ARRAY_SIZE(htcherald_config); platform_add_devices(devices, ARRAY_SIZE(devices)); htcherald_disable_watchdog(); @@ -598,6 +593,8 @@ static void __init htcherald_init(void) htc_mmc_data[0] = &htc_mmc1_data; omap1_init_mmc(htc_mmc_data, 1); #endif + + omapfb_set_lcd_config(&htcherald_lcd_config); } MACHINE_START(HERALD, "HTC Herald") diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 309369ea6978..1d5ab6606b9f 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -25,6 +25,7 @@ #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -370,10 +371,6 @@ static inline void innovator_mmc_init(void) } #endif -static struct omap_board_config_kernel innovator_config[] = { - { OMAP_TAG_LCD, NULL }, -}; - static void __init innovator_init(void) { if (cpu_is_omap1510()) @@ -416,17 +413,15 @@ static void __init innovator_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { omap1_usb_init(&innovator1510_usb_config); - innovator_config[1].data = &innovator1510_lcd_config; + omapfb_set_lcd_config(&innovator1510_lcd_config); } #endif #ifdef CONFIG_ARCH_OMAP16XX if (cpu_is_omap1610()) { omap1_usb_init(&h2_usb_config); - innovator_config[1].data = &innovator1610_lcd_config; + omapfb_set_lcd_config(&innovator1610_lcd_config); } #endif - omap_board_config = innovator_config; - omap_board_config_size = ARRAY_SIZE(innovator_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); innovator_mmc_init(); diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index f9efc036ba96..9b6332a31fb6 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -31,7 +31,6 @@ #include <plat/board.h> #include <plat/keypad.h> #include "common.h" -#include <plat/hwa742.h> #include <plat/lcd_mipid.h> #include <plat/mmc.h> #include <plat/clock.h> @@ -99,15 +98,16 @@ static struct mipid_platform_data nokia770_mipid_platform_data = { .shutdown = mipid_shutdown, }; +static struct omap_lcd_config nokia770_lcd_config __initdata = { + .ctrl_name = "hwa742", +}; + static void __init mipid_dev_init(void) { - const struct omap_lcd_config *conf; + nokia770_mipid_platform_data.nreset_gpio = 13; + nokia770_mipid_platform_data.data_lines = 16; - conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); - if (conf != NULL) { - nokia770_mipid_platform_data.nreset_gpio = conf->nreset_gpio; - nokia770_mipid_platform_data.data_lines = conf->data_lines; - } + omapfb_set_lcd_config(&nokia770_lcd_config); } static void __init ads7846_dev_init(void) @@ -150,14 +150,9 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = { }, }; -static struct hwa742_platform_data nokia770_hwa742_platform_data = { - .te_connected = 1, -}; - static void __init hwa742_dev_init(void) { clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL); - omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data); } /* assume no Mini-AB port */ diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 675de06557aa..ef874655fbd3 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -34,6 +34,7 @@ #include <linux/i2c.h> #include <linux/leds.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -300,12 +301,6 @@ static struct omap_lcd_config osk_lcd_config __initdata = { }; #endif -static struct omap_board_config_kernel osk_config[] __initdata = { -#ifdef CONFIG_OMAP_OSK_MISTRAL - { OMAP_TAG_LCD, &osk_lcd_config }, -#endif -}; - #ifdef CONFIG_OMAP_OSK_MISTRAL #include <linux/input.h> @@ -549,8 +544,6 @@ static void __init osk_init(void) osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys(); osk_flash_resource.end += SZ_32M - 1; platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices)); - omap_board_config = osk_config; - omap_board_config_size = ARRAY_SIZE(osk_config); l = omap_readl(USB_TRANSCEIVER_CTRL); l |= (3 << 1); @@ -567,6 +560,11 @@ static void __init osk_init(void) omap_register_i2c_bus(1, 400, osk_i2c_board_info, ARRAY_SIZE(osk_i2c_board_info)); osk_mistral_init(); + +#ifdef CONFIG_OMAP_OSK_MISTRAL + omapfb_set_lcd_config(&osk_lcd_config); +#endif + } MACHINE_START(OMAP_OSK, "TI-OSK") diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 81fa27f88369..612342cb2a2d 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -27,6 +27,7 @@ #include <linux/spi/spi.h> #include <linux/interrupt.h> #include <linux/apm-emulation.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -209,10 +210,6 @@ static struct omap_lcd_config palmte_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel palmte_config[] __initdata = { - { OMAP_TAG_LCD, &palmte_lcd_config }, -}; - static struct spi_board_info palmte_spi_info[] __initdata = { { .modalias = "tsc2102", @@ -250,9 +247,6 @@ static void __init omap_palmte_init(void) omap_cfg_reg(UART3_TX); omap_cfg_reg(UART3_RX); - omap_board_config = palmte_config; - omap_board_config_size = ARRAY_SIZE(palmte_config); - platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices)); spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); @@ -260,6 +254,8 @@ static void __init omap_palmte_init(void) omap_serial_init(); omap1_usb_init(&palmte_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); + + omapfb_set_lcd_config(&palmte_lcd_config); } MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 81cb82178388..b63350bc88fd 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -24,6 +24,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/leds.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -273,10 +274,6 @@ static struct omap_lcd_config palmtt_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel palmtt_config[] __initdata = { - { OMAP_TAG_LCD, &palmtt_lcd_config }, -}; - static void __init omap_mpu_wdt_mode(int mode) { if (mode) omap_writew(0x8000, OMAP_WDT_TIMER_MODE); @@ -298,15 +295,14 @@ static void __init omap_palmtt_init(void) omap_mpu_wdt_mode(0); - omap_board_config = palmtt_config; - omap_board_config_size = ARRAY_SIZE(palmtt_config); - platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices)); spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo)); omap_serial_init(); omap1_usb_init(&palmtt_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); + + omapfb_set_lcd_config(&palmtt_lcd_config); } MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index e881945ce8ec..9924c70af09f 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -27,6 +27,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -239,10 +240,6 @@ static struct omap_lcd_config palmz71_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel palmz71_config[] __initdata = { - {OMAP_TAG_LCD, &palmz71_lcd_config}, -}; - static irqreturn_t palmz71_powercable(int irq, void *dev_id) { @@ -313,9 +310,6 @@ omap_palmz71_init(void) palmz71_gpio_setup(1); omap_mpu_wdt_mode(0); - omap_board_config = palmz71_config; - omap_board_config_size = ARRAY_SIZE(palmz71_config); - platform_add_devices(devices, ARRAY_SIZE(devices)); spi_register_board_info(palmz71_boardinfo, @@ -324,6 +318,8 @@ omap_palmz71_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); palmz71_gpio_setup(0); + + omapfb_set_lcd_config(&palmz71_lcd_config); } MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index c000bed76276..8e0153447c6d 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -21,6 +21,7 @@ #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -232,27 +233,17 @@ static struct platform_device kp_device = { .resource = kp_resources, }; -static struct platform_device lcd_device = { - .name = "lcd_p2", - .id = -1, -}; - static struct platform_device *devices[] __initdata = { &nor_device, &nand_device, &smc91x_device, &kp_device, - &lcd_device, }; static struct omap_lcd_config perseus2_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel perseus2_config[] __initdata = { - { OMAP_TAG_LCD, &perseus2_lcd_config }, -}; - static void __init perseus2_init_smc91x(void) { fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); @@ -320,10 +311,10 @@ static void __init omap_perseus2_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - omap_board_config = perseus2_config; - omap_board_config_size = ARRAY_SIZE(perseus2_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); + + omapfb_set_lcd_config(&perseus2_lcd_config); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 7bcd82ab0fd0..0c76e12337d9 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -27,6 +27,7 @@ #include <linux/i2c.h> #include <linux/errno.h> #include <linux/export.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -355,11 +356,6 @@ static struct omap_usb_config sx1_usb_config __initdata = { /*----------- LCD -------------------------*/ -static struct platform_device sx1_lcd_device = { - .name = "lcd_sx1", - .id = -1, -}; - static struct omap_lcd_config sx1_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -368,14 +364,8 @@ static struct omap_lcd_config sx1_lcd_config __initdata = { static struct platform_device *sx1_devices[] __initdata = { &sx1_flash_device, &sx1_kp_device, - &sx1_lcd_device, &sx1_irda_device, }; -/*-----------------------------------------*/ - -static struct omap_board_config_kernel sx1_config[] __initdata = { - { OMAP_TAG_LCD, &sx1_lcd_config }, -}; /*-----------------------------------------*/ @@ -391,8 +381,6 @@ static void __init omap_sx1_init(void) platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices)); - omap_board_config = sx1_config; - omap_board_config_size = ARRAY_SIZE(sx1_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); omap1_usb_init(&sx1_usb_config); @@ -406,6 +394,8 @@ static void __init omap_sx1_init(void) gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */ gpio_direction_output(11, 0); /*A_SWITCH = 0 */ gpio_direction_output(15, 0); /*A_USB_ON = 0 */ + + omapfb_set_lcd_config(&sx1_lcd_config); } MACHINE_START(SX1, "OMAP310 based Siemens SX1") diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 1d76a63c0983..187b2fe132e9 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -28,7 +28,6 @@ #include <plat/mux.h> #include <plat/mmc.h> #include <plat/omap7xx.h> -#include <plat/mcbsp.h> #include "clock.h" @@ -250,16 +249,8 @@ static struct platform_device omap_pcm = { .id = -1, }; -OMAP_MCBSP_PLATFORM_DEVICE(1); -OMAP_MCBSP_PLATFORM_DEVICE(2); -OMAP_MCBSP_PLATFORM_DEVICE(3); - static void omap_init_audio(void) { - platform_device_register(&omap_mcbsp1); - platform_device_register(&omap_mcbsp2); - if (!cpu_is_omap7xx()) - platform_device_register(&omap_mcbsp3); platform_device_register(&omap_pcm); } diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index 453809359ba6..4c5ce7d829c2 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -117,7 +117,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); void omap_set_lcd_dma_b1_vxres(unsigned long vxres) { if (cpu_is_omap15xx()) { - printk(KERN_ERR "DMA virtual resulotion is not supported " + printk(KERN_ERR "DMA virtual resolution is not supported " "in 1510 mode\n"); BUG(); } diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 91f9abbd3250..3e8410a99990 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -420,18 +420,6 @@ static int __init omap1_mcbsp_init(void) return -ENODEV; if (cpu_is_omap7xx()) - omap_mcbsp_count = OMAP7XX_MCBSP_COUNT; - else if (cpu_is_omap15xx()) - omap_mcbsp_count = OMAP15XX_MCBSP_COUNT; - else if (cpu_is_omap16xx()) - omap_mcbsp_count = OMAP16XX_MCBSP_COUNT; - - mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *), - GFP_KERNEL); - if (!mcbsp_ptr) - return -ENOMEM; - - if (cpu_is_omap7xx()) omap_mcbsp_register_board_cfg(omap7xx_mcbsp_res_0, OMAP7XX_MCBSP_RES_SZ, omap7xx_mcbsp_pdata, @@ -449,7 +437,7 @@ static int __init omap1_mcbsp_init(void) omap16xx_mcbsp_pdata, OMAP16XX_MCBSP_COUNT); - return omap_mcbsp_init(); + return 0; } arch_initcall(omap1_mcbsp_init); |