aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/board-n8x0.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/board-n8x0.c')
-rw-r--r--arch/arm/mach-omap2/board-n8x0.c156
1 files changed, 44 insertions, 112 deletions
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 3353b0a923d9..564bf80a2621 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -10,7 +10,8 @@
#include <linux/clk.h>
#include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
@@ -28,13 +29,12 @@
#include "common.h"
#include "mmc.h"
+#include "usb-tusb6010.h"
#include "soc.h"
#include "common-board-devices.h"
#define TUSB6010_ASYNC_CS 1
#define TUSB6010_SYNC_CS 4
-#define TUSB6010_GPIO_INT 58
-#define TUSB6010_GPIO_ENABLE 0
#define TUSB6010_DMACHAN 0x3f
#define NOKIA_N810_WIMAX (1 << 2)
@@ -61,37 +61,6 @@ static void board_check_revision(void)
}
#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
-/*
- * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
- * 1.5 V voltage regulators of PM companion chip. Companion chip will then
- * provide then PGOOD signal to TUSB6010 which will release it from reset.
- */
-static int tusb_set_power(int state)
-{
- int i, retval = 0;
-
- if (state) {
- gpio_set_value(TUSB6010_GPIO_ENABLE, 1);
- msleep(1);
-
- /* Wait until TUSB6010 pulls INT pin down */
- i = 100;
- while (i && gpio_get_value(TUSB6010_GPIO_INT)) {
- msleep(1);
- i--;
- }
-
- if (!i) {
- printk(KERN_ERR "tusb: powerup failed\n");
- retval = -ENODEV;
- }
- } else {
- gpio_set_value(TUSB6010_GPIO_ENABLE, 0);
- msleep(10);
- }
-
- return retval;
-}
static struct musb_hdrc_config musb_config = {
.multipoint = 1,
@@ -102,39 +71,36 @@ static struct musb_hdrc_config musb_config = {
static struct musb_hdrc_platform_data tusb_data = {
.mode = MUSB_OTG,
- .set_power = tusb_set_power,
.min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */
.power = 100, /* Max 100 mA VBUS for host mode */
.config = &musb_config,
};
+static struct gpiod_lookup_table tusb_gpio_table = {
+ .dev_id = "musb-tusb",
+ .table = {
+ GPIO_LOOKUP("gpio-0-15", 0, "enable",
+ GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-48-63", 10, "int",
+ GPIO_ACTIVE_HIGH),
+ { }
+ },
+};
+
static void __init n8x0_usb_init(void)
{
int ret = 0;
- static const char announce[] __initconst = KERN_INFO "TUSB 6010\n";
-
- /* PM companion chip power control pin */
- ret = gpio_request_one(TUSB6010_GPIO_ENABLE, GPIOF_OUT_INIT_LOW,
- "TUSB6010 enable");
- if (ret != 0) {
- printk(KERN_ERR "Could not get TUSB power GPIO%i\n",
- TUSB6010_GPIO_ENABLE);
- return;
- }
- tusb_set_power(0);
+ gpiod_add_lookup_table(&tusb_gpio_table);
ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
- TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
- TUSB6010_GPIO_INT, TUSB6010_DMACHAN);
+ TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
+ TUSB6010_DMACHAN);
if (ret != 0)
- goto err;
+ return;
- printk(announce);
+ pr_info("TUSB 6010\n");
return;
-
-err:
- gpio_free(TUSB6010_GPIO_ENABLE);
}
#else
@@ -170,22 +136,32 @@ static struct spi_board_info n800_spi_board_info[] __initdata = {
* GPIO23 and GPIO9 slot 2 EMMC on N810
*
*/
-#define N8X0_SLOT_SWITCH_GPIO 96
-#define N810_EMMC_VSD_GPIO 23
-#define N810_EMMC_VIO_GPIO 9
-
static int slot1_cover_open;
static int slot2_cover_open;
static struct device *mmc_device;
-static int n8x0_mmc_switch_slot(struct device *dev, int slot)
-{
-#ifdef CONFIG_MMC_DEBUG
- dev_dbg(dev, "Choose slot %d\n", slot + 1);
-#endif
- gpio_set_value(N8X0_SLOT_SWITCH_GPIO, slot);
- return 0;
-}
+static struct gpiod_lookup_table nokia8xx_mmc_gpio_table = {
+ .dev_id = "mmci-omap.0",
+ .table = {
+ /* Slot switch, GPIO 96 */
+ GPIO_LOOKUP("gpio-80-111", 16,
+ "switch", GPIO_ACTIVE_HIGH),
+ { }
+ },
+};
+
+static struct gpiod_lookup_table nokia810_mmc_gpio_table = {
+ .dev_id = "mmci-omap.0",
+ .table = {
+ /* Slot index 1, VSD power, GPIO 23 */
+ GPIO_LOOKUP_IDX("gpio-16-31", 7,
+ "vsd", 1, GPIO_ACTIVE_HIGH),
+ /* Slot index 1, VIO power, GPIO 9 */
+ GPIO_LOOKUP_IDX("gpio-0-15", 9,
+ "vsd", 1, GPIO_ACTIVE_HIGH),
+ { }
+ },
+};
static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
int power_on, int vdd)
@@ -256,31 +232,13 @@ static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
return 0;
}
-static void n810_set_power_emmc(struct device *dev,
- int power_on)
-{
- dev_dbg(dev, "Set EMMC power %s\n", power_on ? "on" : "off");
-
- if (power_on) {
- gpio_set_value(N810_EMMC_VSD_GPIO, 1);
- msleep(1);
- gpio_set_value(N810_EMMC_VIO_GPIO, 1);
- msleep(1);
- } else {
- gpio_set_value(N810_EMMC_VIO_GPIO, 0);
- msleep(50);
- gpio_set_value(N810_EMMC_VSD_GPIO, 0);
- msleep(50);
- }
-}
-
static int n8x0_mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
if (board_is_n800() || slot == 0)
return n8x0_mmc_set_power_menelaus(dev, slot, power_on, vdd);
- n810_set_power_emmc(dev, power_on);
+ /* The n810 power will be handled by GPIO code in the driver */
return 0;
}
@@ -418,13 +376,6 @@ static void n8x0_mmc_shutdown(struct device *dev)
static void n8x0_mmc_cleanup(struct device *dev)
{
menelaus_unregister_mmc_callback();
-
- gpio_free(N8X0_SLOT_SWITCH_GPIO);
-
- if (board_is_n810()) {
- gpio_free(N810_EMMC_VSD_GPIO);
- gpio_free(N810_EMMC_VIO_GPIO);
- }
}
/*
@@ -433,7 +384,6 @@ static void n8x0_mmc_cleanup(struct device *dev)
*/
static struct omap_mmc_platform_data mmc1_data = {
.nr_slots = 0,
- .switch_slot = n8x0_mmc_switch_slot,
.init = n8x0_mmc_late_init,
.cleanup = n8x0_mmc_cleanup,
.shutdown = n8x0_mmc_shutdown,
@@ -463,14 +413,9 @@ static struct omap_mmc_platform_data mmc1_data = {
static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
-static struct gpio n810_emmc_gpios[] __initdata = {
- { N810_EMMC_VSD_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vddf" },
- { N810_EMMC_VIO_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vdd" },
-};
-
static void __init n8x0_mmc_init(void)
{
- int err;
+ gpiod_add_lookup_table(&nokia8xx_mmc_gpio_table);
if (board_is_n810()) {
mmc1_data.slots[0].name = "external";
@@ -483,20 +428,7 @@ static void __init n8x0_mmc_init(void)
*/
mmc1_data.slots[1].name = "internal";
mmc1_data.slots[1].ban_openended = 1;
- }
-
- err = gpio_request_one(N8X0_SLOT_SWITCH_GPIO, GPIOF_OUT_INIT_LOW,
- "MMC slot switch");
- if (err)
- return;
-
- if (board_is_n810()) {
- err = gpio_request_array(n810_emmc_gpios,
- ARRAY_SIZE(n810_emmc_gpios));
- if (err) {
- gpio_free(N8X0_SLOT_SWITCH_GPIO);
- return;
- }
+ gpiod_add_lookup_table(&nokia810_mmc_gpio_table);
}
mmc1_data.nr_slots = 2;
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 21:58:34 +0000