diff options
Diffstat (limited to 'arch/arm/mach-omap2/clock.c')
| -rw-r--r-- | arch/arm/mach-omap2/clock.c | 79 |
1 files changed, 14 insertions, 65 deletions
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 180f675c9064..72eb4bf571ac 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -28,14 +28,14 @@ #include <asm/arch/clock.h> #include <asm/arch/sram.h> -#include <asm/arch/prcm.h> +#include "prcm-regs.h" +#include "memory.h" #include "clock.h" //#define DOWN_VARIABLE_DPLL 1 /* Experimental */ static struct prcm_config *curr_prcm_set; -static struct memory_timings mem_timings; static u32 curr_perf_level = PRCM_FULL_SPEED; /*------------------------------------------------------------------------- @@ -54,11 +54,13 @@ static void omap2_sys_clk_recalc(struct clk * clk) static u32 omap2_get_dpll_rate(struct clk * tclk) { - int dpll_clk, dpll_mult, dpll_div, amult; + long long dpll_clk; + int dpll_mult, dpll_div, amult; dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff; /* 10 bits */ dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f; /* 4 bits */ - dpll_clk = (tclk->parent->rate * dpll_mult) / (dpll_div + 1); + dpll_clk = (long long)tclk->parent->rate * dpll_mult; + do_div(dpll_clk, dpll_div + 1); amult = CM_CLKSEL2_PLL & 0x3; dpll_clk *= amult; @@ -385,75 +387,23 @@ static u32 omap2_dll_force_needed(void) return 0; } -static void omap2_init_memory_params(u32 force_lock_to_unlock_mode) -{ - unsigned long dll_cnt; - u32 fast_dll = 0; - - mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */ - - /* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others. - * In the case of 2422, its ok to use CS1 instead of CS0. - */ - -#if 0 /* FIXME: Enable after 24xx cpu detection works */ - ctype = get_cpu_type(); - if (cpu_is_omap2422()) - mem_timings.base_cs = 1; - else -#endif - mem_timings.base_cs = 0; - - if (mem_timings.m_type != M_DDR) - return; - - /* With DDR we need to determine the low frequency DLL value */ - if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL)) - mem_timings.dll_mode = M_UNLOCK; - else - mem_timings.dll_mode = M_LOCK; - - if (mem_timings.base_cs == 0) { - fast_dll = SDRC_DLLA_CTRL; - dll_cnt = SDRC_DLLA_STATUS & 0xff00; - } else { - fast_dll = SDRC_DLLB_CTRL; - dll_cnt = SDRC_DLLB_STATUS & 0xff00; - } - if (force_lock_to_unlock_mode) { - fast_dll &= ~0xff00; - fast_dll |= dll_cnt; /* Current lock mode */ - } - mem_timings.fast_dll_ctrl = fast_dll; - - /* No disruptions, DDR will be offline & C-ABI not followed */ - omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl, - mem_timings.fast_dll_ctrl, - mem_timings.base_cs, - force_lock_to_unlock_mode); - mem_timings.slow_dll_ctrl &= 0xff00; /* Keep lock value */ - - /* Turn status into unlock ctrl */ - mem_timings.slow_dll_ctrl |= - ((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2)); - - /* 90 degree phase for anything below 133Mhz */ - mem_timings.slow_dll_ctrl |= (1 << 1); -} - static u32 omap2_reprogram_sdrc(u32 level, u32 force) { + u32 slow_dll_ctrl, fast_dll_ctrl, m_type; u32 prev = curr_perf_level, flags; if ((curr_perf_level == level) && !force) return prev; + m_type = omap2_memory_get_type(); + slow_dll_ctrl = omap2_memory_get_slow_dll_ctrl(); + fast_dll_ctrl = omap2_memory_get_fast_dll_ctrl(); + if (level == PRCM_HALF_SPEED) { local_irq_save(flags); PRCM_VOLTSETUP = 0xffff; omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED, - mem_timings.slow_dll_ctrl, - mem_timings.m_type); + slow_dll_ctrl, m_type); curr_perf_level = PRCM_HALF_SPEED; local_irq_restore(flags); } @@ -461,8 +411,7 @@ static u32 omap2_reprogram_sdrc(u32 level, u32 force) local_irq_save(flags); PRCM_VOLTSETUP = 0xffff; omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED, - mem_timings.fast_dll_ctrl, - mem_timings.m_type); + fast_dll_ctrl, m_type); curr_perf_level = PRCM_FULL_SPEED; local_irq_restore(flags); } @@ -650,7 +599,7 @@ static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask, case 13: /* dss2 */ mask = 0x1; break; case 25: /* usb */ - mask = 0xf; break; + mask = 0x7; break; } } |