diff options
Diffstat (limited to 'arch/arm/mach-s3c2440/Kconfig')
| -rw-r--r-- | arch/arm/mach-s3c2440/Kconfig | 165 |
1 files changed, 0 insertions, 165 deletions
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 914e620f1257..ece7a10fe3c6 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -2,35 +2,6 @@ # # Licensed under GPLv2 -config CPU_S3C2440 - bool - select CPU_ARM920T - select S3C2410_CLOCK - select S3C2410_PM if PM - select S3C2440_DMA if S3C2410_DMA - select CPU_S3C244X - select CPU_LLSERIAL_S3C2440 - help - Support for S3C2440 Samsung Mobile CPU based systems. - -config CPU_S3C2442 - bool - select CPU_ARM920T - select S3C2410_CLOCK - select S3C2410_PM if PM - select CPU_S3C244X - select CPU_LLSERIAL_S3C2440 - help - Support for S3C2442 Samsung Mobile CPU based systems. - -config CPU_S3C244X - bool - depends on CPU_S3C2440 || CPU_S3C2442 - help - Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems. - - - config S3C2440_CPUFREQ bool "S3C2440/S3C2442 CPU Frequency scaling support" depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442) @@ -64,139 +35,3 @@ config S3C2440_PLL_16934400 default y if CPU_FREQ_S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. - -config S3C2440_DMA - bool - depends on CPU_S3C2440 - help - Support for S3C2440 specific DMA code5A - -menu "S3C2440 and S3C2442 Machines" - -config MACH_ANUBIS - bool "Simtec Electronics ANUBIS" - select CPU_S3C2440 - select S3C24XX_DCLK - select PM_SIMTEC if PM - select HAVE_PATA_PLATFORM - select S3C24XX_GPIO_EXTRA64 - select S3C2440_XTAL_12000000 - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Simtec Electronics ANUBIS - development system - -config MACH_NEO1973_GTA02 - bool "Openmoko GTA02 / Freerunner phone" - select CPU_S3C2442 - select MFD_PCF50633 - select PCF50633_GPIO - select I2C - select POWER_SUPPLY - select MACH_NEO1973 - select S3C2410_PWM - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone - -config MACH_OSIRIS - bool "Simtec IM2440D20 (OSIRIS) module" - select CPU_S3C2440 - select S3C24XX_DCLK - select PM_SIMTEC if PM - select S3C24XX_GPIO_EXTRA128 - select S3C2440_XTAL_12000000 - select S3C2410_IOTIMING if S3C2440_CPUFREQ - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Simtec IM2440D20 module, also - known as the Osiris. - -config MACH_OSIRIS_DVS - tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" - depends on MACH_OSIRIS - select TPS65010 - help - Say Y/M here if you want to have dynamic voltage scaling support - on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. - - The DVS driver alters the voltage supplied to the ARM core - depending on the frequency it is running at. The driver itself - does not do any of the frequency alteration, which is left up - to the cpufreq driver. - -config MACH_RX3715 - bool "HP iPAQ rx3715" - select CPU_S3C2440 - select S3C2440_XTAL_16934400 - select PM_H1940 if PM - select S3C_DEV_NAND - help - Say Y here if you are using the HP iPAQ rx3715. - -config ARCH_S3C2440 - bool "SMDK2440" - select CPU_S3C2440 - select S3C2440_XTAL_16934400 - select MACH_SMDK - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the SMDK2440. - -config MACH_NEXCODER_2440 - bool "NexVision NEXCODER 2440 Light Board" - select CPU_S3C2440 - select S3C2440_XTAL_12000000 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board - -config SMDK2440_CPU2440 - bool "SMDK2440 with S3C2440 CPU module" - default y if ARCH_S3C2440 - select S3C2440_XTAL_16934400 - select CPU_S3C2440 - -config SMDK2440_CPU2442 - bool "SMDM2440 with S3C2442 CPU module" - select CPU_S3C2442 - -config MACH_AT2440EVB - bool "Avantech AT2440EVB development board" - select CPU_S3C2440 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the AT2440EVB development board - -config MACH_MINI2440 - bool "MINI2440 development board" - select CPU_S3C2440 - select EEPROM_AT24 - select NEW_LEDS - select LEDS_CLASS - select LEDS_TRIGGER - select LEDS_TRIGGER_BACKLIGHT - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - help - Say Y here to select support for the MINI2440. Is a 10cm x 10cm board - available via various sources. It can come with a 3.5" or 7" touch LCD. - -config MACH_RX1950 - bool "HP iPAQ rx1950" - select CPU_S3C2442 - select S3C24XX_DCLK - select PM_H1940 if PM - select I2C - select S3C2410_PWM - select S3C_DEV_NAND - select S3C2410_IOTIMING if S3C2440_CPUFREQ - select S3C2440_XTAL_16934400 - help - Say Y here if you're using HP iPAQ rx1950 - -endmenu |