diff options
Diffstat (limited to 'arch/arm64')
223 files changed, 8450 insertions, 2487 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index c9a7e9e1414f..7381eeb7ef8e 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -16,6 +16,7 @@ config ARM64 select ARCH_HAS_GCOV_PROFILE_ALL select ARCH_HAS_GIGANTIC_PAGE if (MEMORY_ISOLATION && COMPACTION) || CMA select ARCH_HAS_KCOV + select ARCH_HAS_MEMBARRIER_SYNC_CORE select ARCH_HAS_SET_MEMORY select ARCH_HAS_SG_CHAIN select ARCH_HAS_STRICT_KERNEL_RWX @@ -59,6 +60,7 @@ config ARM64 select COMMON_CLK select CPU_PM if (SUSPEND || CPU_IDLE) select DCACHE_WORD_ACCESS + select DMA_DIRECT_OPS select EDAC_SUPPORT select FRAME_POINTER select GENERIC_ALLOCATOR @@ -90,6 +92,7 @@ config ARM64 select HAVE_ARCH_MMAP_RND_BITS select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT select HAVE_ARCH_SECCOMP_FILTER + select HAVE_ARCH_THREAD_STRUCT_WHITELIST select HAVE_ARCH_TRACEHOOK select HAVE_ARCH_TRANSPARENT_HUGEPAGE select HAVE_ARCH_VMAP_STACK @@ -227,7 +230,7 @@ config GENERIC_CSUM config GENERIC_CALIBRATE_DELAY def_bool y -config ZONE_DMA +config ZONE_DMA32 def_bool y config HAVE_GENERIC_GUP @@ -522,20 +525,13 @@ config CAVIUM_ERRATUM_30115 config QCOM_FALKOR_ERRATUM_1003 bool "Falkor E1003: Incorrect translation due to ASID change" default y - select ARM64_PAN if ARM64_SW_TTBR0_PAN help On Falkor v1, an incorrect ASID may be cached in the TLB when ASID - and BADDR are changed together in TTBRx_EL1. The workaround for this - issue is to use a reserved ASID in cpu_do_switch_mm() before - switching to the new ASID. Saying Y here selects ARM64_PAN if - ARM64_SW_TTBR0_PAN is selected. This is done because implementing and - maintaining the E1003 workaround in the software PAN emulation code - would be an unnecessary complication. The affected Falkor v1 CPU - implements ARMv8.1 hardware PAN support and using hardware PAN - support versus software PAN emulation is mutually exclusive at - runtime. - - If unsure, say Y. + and BADDR are changed together in TTBRx_EL1. Since we keep the ASID + in TTBR1_EL1, this situation only occurs in the entry trampoline and + then only for entries in the walk cache, since the leaf translation + is unchanged. Work around the erratum by invalidating the walk cache + entries for the trampoline before entering the kernel proper. config QCOM_FALKOR_ERRATUM_1009 bool "Falkor E1009: Prematurely complete a DSB after a TLBI" @@ -656,6 +652,35 @@ config ARM64_VA_BITS default 47 if ARM64_VA_BITS_47 default 48 if ARM64_VA_BITS_48 +choice + prompt "Physical address space size" + default ARM64_PA_BITS_48 + help + Choose the maximum physical address range that the kernel will + support. + +config ARM64_PA_BITS_48 + bool "48-bit" + +config ARM64_PA_BITS_52 + bool "52-bit (ARMv8.2)" + depends on ARM64_64K_PAGES + depends on ARM64_PAN || !ARM64_SW_TTBR0_PAN + help + Enable support for a 52-bit physical address space, introduced as + part of the ARMv8.2-LPA extension. + + With this enabled, the kernel will also continue to work on CPUs that + do not support ARMv8.2-LPA, but with some added memory overhead (and + minor performance overhead). + +endchoice + +config ARM64_PA_BITS + int + default 48 if ARM64_PA_BITS_48 + default 52 if ARM64_PA_BITS_52 + config CPU_BIG_ENDIAN bool "Build big-endian kernel" help @@ -850,6 +875,35 @@ config FORCE_MAX_ZONEORDER However for 4K, we choose a higher default value, 11 as opposed to 10, giving us 4M allocations matching the default size used by generic code. +config UNMAP_KERNEL_AT_EL0 + bool "Unmap kernel when running in userspace (aka \"KAISER\")" if EXPERT + default y + help + Speculation attacks against some high-performance processors can + be used to bypass MMU permission checks and leak kernel data to + userspace. This can be defended against by unmapping the kernel + when running in userspace, mapping it back in on exception entry + via a trampoline page in the vector table. + + If unsure, say Y. + +config HARDEN_BRANCH_PREDICTOR + bool "Harden the branch predictor against aliasing attacks" if EXPERT + default y + help + Speculation attacks against some high-performance processors rely on + being able to manipulate the branch predictor for a victim context by + executing aliasing branches in the attacker context. Such attacks + can be partially mitigated against by clearing internal branch + predictor state and limiting the prediction logic in some situations. + + This config option will take CPU-specific actions to harden the + branch predictor against aliasing attacks and may rely on specific + instruction sequences or control bits being set by the system + firmware. + + If unsure, say Y. + menuconfig ARMV8_DEPRECATED bool "Emulate deprecated/obsolete ARMv8 instructions" depends on COMPAT @@ -1021,6 +1075,22 @@ config ARM64_PMEM operations if DC CVAP is not supported (following the behaviour of DC CVAP itself if the system does not define a point of persistence). +config ARM64_RAS_EXTN + bool "Enable support for RAS CPU Extensions" + default y + help + CPUs that support the Reliability, Availability and Serviceability + (RAS) Extensions, part of ARMv8.2 are able to track faults and + errors, classify them and report them to software. + + On CPUs with these extensions system software can use additional + barriers to determine if faults are pending and read the + classification from a new set of registers. + + Selecting this feature will allow the kernel to use these barriers + and access the new registers if the system supports the extension. + Platform RAS features may additionally depend on firmware support. + endmenu config ARM64_SVE diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 2401373565ff..fbedbd8f619a 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -105,6 +105,7 @@ config ARCH_MESON select PINCTRL_MESON select COMMON_CLK_AMLOGIC select COMMON_CLK_GXBB + select COMMON_CLK_AXG select MESON_IRQ_GPIO help This enables support for the Amlogic S905 SoCs. diff --git a/arch/arm64/boot/dts/actions/Makefile b/arch/arm64/boot/dts/actions/Makefile index cc4661256356..d8b923480f5a 100644 --- a/arch/arm64/boot/dts/actions/Makefile +++ b/arch/arm64/boot/dts/actions/Makefile @@ -1 +1,3 @@ +dtb-$(CONFIG_ARCH_ACTIONS) += s700-cubieboard7.dtb + dtb-$(CONFIG_ARCH_ACTIONS) += s900-bubblegum-96.dtb diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts new file mode 100644 index 000000000000..ef79d7905f44 --- /dev/null +++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Andreas Färber + */ + +/dts-v1/; + +#include "s700.dtsi" + +/ { + compatible = "cubietech,cubieboard7", "actions,s700"; + model = "CubieBoard7"; + + aliases { + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + memory@1,e0000000 { + device_type = "memory"; + reg = <0x1 0xe0000000 0x0 0x0>; + }; + + uart3_clk: uart3-clk { + compatible = "fixed-clock"; + clock-frequency = <921600>; + #clock-cells = <0>; + }; +}; + +&timer { + clocks = <&hosc>; +}; + +&uart3 { + status = "okay"; + clocks = <&uart3_clk>; +}; diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi new file mode 100644 index 000000000000..66dd5309f0a2 --- /dev/null +++ b/arch/arm64/boot/dts/actions/s700.dtsi @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Andreas Färber + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "actions,s700"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secmon@1f000000 { + reg = <0x0 0x1f000000 0x0 0x1000000>; + no-map; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + hosc: hosc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@e00f1000 { + compatible = "arm,gic-400"; + reg = <0x0 0xe00f1000 0x0 0x1000>, + <0x0 0xe00f2000 0x0 0x2000>, + <0x0 0xe00f4000 0x0 0x2000>, + <0x0 0xe00f6000 0x0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + uart0: serial@e0120000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0120000 0x0 0x2000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart1: serial@e0122000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0122000 0x0 0x2000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart2: serial@e0124000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0124000 0x0 0x2000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart3: serial@e0126000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0126000 0x0 0x2000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart4: serial@e0128000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0128000 0x0 0x2000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart5: serial@e012a000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe012a000 0x0 0x2000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart6: serial@e012c000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe012c000 0x0 0x2000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sps: power-controller@e01b0100 { + compatible = "actions,s700-sps"; + reg = <0x0 0xe01b0100 0x0 0x100>; + #power-domain-cells = <1>; + }; + + timer: timer@e024c000 { + compatible = "actions,s700-timer"; + reg = <0x0 0xe024c000 0x0 0x4000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "timer1"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 4a8d3f83a36e..a6975670cd1c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -60,6 +60,26 @@ stdout-path = "serial0:115200n8"; }; + leds { + compatible = "gpio-leds"; + + pwr-led { + label = "bananapi-m64:red:pwr"; + gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ + default-state = "on"; + }; + + green { + label = "bananapi-m64:green:user"; + gpios = <&pio 4 14 GPIO_ACTIVE_HIGH>; /* PE14 */ + }; + + blue { + label = "bananapi-m64:blue:user"; + gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */ + }; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ @@ -153,6 +173,17 @@ #include "axp803.dtsi" +®_aldo1 { + /* + * This regulator also drives the PE pingroup GPIOs, + * which also controls two LEDs. + */ + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "afvcc-csi"; +}; + ®_aldo2 { regulator-always-on; regulator-min-microvolt = <1800000>; @@ -168,6 +199,11 @@ }; ®_dc1sw { + /* + * This regulator also indirectly drives the PD pingroup GPIOs, + * which also controls the power LED. + */ + regulator-always-on; regulator-name = "vcc-phy"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts index 338e786155b1..8807664f363a 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts @@ -57,6 +57,11 @@ chosen { stdout-path = "serial0:115200n8"; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; }; &mmc0 { @@ -70,6 +75,24 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_aldo2>; + vqmmc-supply = <®_dldo4>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723bs: wifi@1 { + reg = <1>; + interrupt-parent = <&r_pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */ + interrupt-names = "host-wake"; + }; +}; + &r_rsb { status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index 5f8ff4017d45..240d35731d10 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -57,13 +57,6 @@ chosen { stdout-path = "serial0:115200n8"; }; - - reg_vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; }; &ehci1 { @@ -73,7 +66,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; cd-inverted; status = "okay"; @@ -83,6 +76,122 @@ status = "okay"; }; +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp803.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "afvcc-csi"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1040000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-hdmi-dsi"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_dldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avdd-csi"; +}; + +®_dldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "cpvdd"; +}; + +®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +/* + * The A64 chip cannot work without this regulator off, although + * it seems to be only driving the AR100 core. + * Maybe we don't still know well about CPUs domain. + */ +®_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts index 7c028af58f47..1ed9f219deaf 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts @@ -53,6 +53,7 @@ compatible = "friendlyarm,nanopi-neo-plus2", "allwinner,sun50i-h5"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -133,9 +134,25 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; +}; + &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts index 6eb8092d8e57..f1447003ea3c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts @@ -127,7 +127,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index a0ca925175aa..9e51d3a5f4e6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -161,7 +161,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts index b47790650144..0f25c4a6f15d 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts @@ -168,7 +168,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts index a42fd79a62a3..af43533c7134 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts @@ -64,17 +64,43 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ + post-power-on-delay-ms = <200>; + }; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */ + interrupt-names = "host-wake"; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; @@ -90,3 +116,9 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index d9a720bff05d..e237c05cfdb4 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -98,6 +98,10 @@ compatible = "allwinner,sun50i-h5-ccu"; }; +&display_clocks { + compatible = "allwinner,sun50i-h5-de2-clk"; +}; + &mmc0 { compatible = "allwinner,sun50i-h5-mmc", "allwinner,sun50i-a64-mmc"; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 9db19314c60c..c89d0c307f8d 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -249,7 +249,9 @@ #address-cells = <1>; #size-cells = <0>; reg = <0xffda4000 0x1000>; - interrupts = <0 101 4>; + interrupts = <0 99 4>; + resets = <&rst SPIM0_RESET>; + reg-io-width = <4>; num-chipselect = <4>; bus-num = <0>; status = "disabled"; @@ -260,7 +262,9 @@ #address-cells = <1>; #size-cells = <0>; reg = <0xffda5000 0x1000>; - interrupts = <0 102 4>; + interrupts = <0 100 4>; + resets = <&rst SPIM1_RESET>; + reg-io-width = <4>; num-chipselect = <4>; bus-num = <0>; status = "disabled"; @@ -336,8 +340,8 @@ interrupts = <0 93 4>; phys = <&usbphy0>; phy-names = "usb2-phy"; - resets = <&rst USB0_RESET>; - reset-names = "dwc2"; + resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; + reset-names = "dwc2", "dwc2-ecc"; status = "disabled"; }; @@ -347,8 +351,8 @@ interrupts = <0 94 4>; phys = <&usbphy0>; phy-names = "usb2-phy"; - resets = <&rst USB1_RESET>; - reset-names = "dwc2"; + resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>; + reset-names = "dwc2", "dwc2-ecc"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index a37c46112876..000756429b77 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -97,3 +97,7 @@ &uart0 { status = "okay"; }; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index 70eca1f8736a..447b98d30921 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -17,6 +17,19 @@ }; }; +ðmac { + status = "okay"; + phy-mode = "rgmii"; + pinctrl-0 = <ð_rgmii_y_pins>; + pinctrl-names = "default"; +}; + &uart_AO { status = "okay"; }; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index b932a784b02a..a80632641b39 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/axg-clkc.h> / { compatible = "amlogic,meson-axg"; @@ -113,13 +114,55 @@ #size-cells = <2>; ranges; - cbus: cbus@ffd00000 { + cbus: bus@ffd00000 { compatible = "simple-bus"; reg = <0x0 0xffd00000 0x0 0x25000>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; + pwm_ab: pwm@1b000 { + compatible = "amlogic,meson-axg-ee-pwm"; + reg = <0x0 0x1b000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@1a000 { + compatible = "amlogic,meson-axg-ee-pwm"; + reg = <0x0 0x1a000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + reset: reset-controller@1004 { + compatible = "amlogic,meson-axg-reset"; + reg = <0x0 0x01004 0x0 0x9c>; + #reset-cells = <1>; + }; + + spicc0: spi@13000 { + compatible = "amlogic,meson-axg-spicc"; + reg = <0x0 0x13000 0x0 0x3c>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_SPICC0>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spicc1: spi@15000 { + compatible = "amlogic,meson-axg-spicc"; + reg = <0x0 0x15000 0x0 0x3c>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_SPICC1>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + uart_A: serial@24000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; reg = <0x0 0x24000 0x0 0x14>; @@ -135,6 +178,19 @@ }; }; + ethmac: ethernet@ff3f0000 { + compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac"; + reg = <0x0 0xff3f0000 0x0 0x10000 + 0x0 0xff634540 0x0 0x8>; + interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "macirq"; + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + status = "disabled"; + }; + gic: interrupt-controller@ffc01000 { compatible = "arm,gic-400"; reg = <0x0 0xffc01000 0 0x1000>, @@ -148,6 +204,20 @@ #address-cells = <0>; }; + hiubus: bus@ff63c000 { + compatible = "simple-bus"; + reg = <0x0 0xff63c000 0x0 0x1c00>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; + + clkc: clock-controller@0 { + compatible = "amlogic,axg-clkc"; + #clock-cells = <1>; + reg = <0x0 0x0 0x0 0x320>; + }; + }; + mailbox: mailbox@ff63dc00 { compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; reg = <0 0xff63dc00 0 0x400>; @@ -157,6 +227,226 @@ #mbox-cells = <1>; }; + periphs: periphs@ff634000 { + compatible = "simple-bus"; + reg = <0x0 0xff634000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; + + pinctrl_periphs: pinctrl@480 { + compatible = "amlogic,meson-axg-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@480 { + reg = <0x0 0x00480 0x0 0x40>, + <0x0 0x004e8 0x0 0x14>, + <0x0 0x00520 0x0 0x14>, + <0x0 0x00430 0x0 0x3c>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_periphs 0 0 86>; + }; + + eth_rgmii_x_pins: eth-x-rgmii { + mux { + groups = "eth_mdio_x", + "eth_mdc_x", + "eth_rgmii_rx_clk_x", + "eth_rx_dv_x", + "eth_rxd0_x", + "eth_rxd1_x", + "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txen_x", + "eth_txd0_x", + "eth_txd1_x", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; + }; + }; + + eth_rgmii_y_pins: eth-y-rgmii { + mux { + groups = "eth_mdio_y", + "eth_mdc_y", + "eth_rgmii_rx_clk_y", + "eth_rx_dv_y", + "eth_rxd0_y", + "eth_rxd1_y", + "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txen_y", + "eth_txd0_y", + "eth_txd1_y", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; + }; + }; + + pwm_a_a_pins: pwm_a_a { + mux { + groups = "pwm_a_a"; + function = "pwm_a"; + }; + }; + + pwm_a_x18_pins: pwm_a_x18 { + mux { + groups = "pwm_a_x18"; + function = "pwm_a"; + }; + }; + + pwm_a_x20_pins: pwm_a_x20 { + mux { + groups = "pwm_a_x20"; + function = "pwm_a"; + }; + }; + + pwm_a_z_pins: pwm_a_z { + mux { + groups = "pwm_a_z"; + function = "pwm_a"; + }; + }; + + pwm_b_a_pins: pwm_b_a { + mux { + groups = "pwm_b_a"; + function = "pwm_b"; + }; + }; + + pwm_b_x_pins: pwm_b_x { + mux { + groups = "pwm_b_x"; + function = "pwm_b"; + }; + }; + + pwm_b_z_pins: pwm_b_z { + mux { + groups = "pwm_b_z"; + function = "pwm_b"; + }; + }; + + pwm_c_a_pins: pwm_c_a { + mux { + groups = "pwm_c_a"; + function = "pwm_c"; + }; + }; + + pwm_c_x10_pins: pwm_c_x10 { + mux { + groups = "pwm_c_x10"; + function = "pwm_c"; + }; + }; + + pwm_c_x17_pins: pwm_c_x17 { + mux { + groups = "pwm_c_x17"; + function = "pwm_c"; + }; + }; + + pwm_d_x11_pins: pwm_d_x11 { + mux { + groups = "pwm_d_x11"; + function = "pwm_d"; + }; + }; + + pwm_d_x16_pins: pwm_d_x16 { + mux { + groups = "pwm_d_x16"; + function = "pwm_d"; + }; + }; + + spi0_pins: spi0 { + mux { + groups = "spi0_miso", + "spi0_mosi", + "spi0_clk"; + function = "spi0"; + }; + }; + + spi0_ss0_pins: spi0_ss0 { + mux { + groups = "spi0_ss0"; + function = "spi0"; + }; + }; + + spi0_ss1_pins: spi0_ss1 { + mux { + groups = "spi0_ss1"; + function = "spi0"; + }; + }; + + spi0_ss2_pins: spi0_ss2 { + mux { + groups = "spi0_ss2"; + function = "spi0"; + }; + }; + + + spi1_a_pins: spi1_a { + mux { + groups = "spi1_miso_a", + "spi1_mosi_a", + "spi1_clk_a"; + function = "spi1"; + }; + }; + + spi1_ss0_a_pins: spi1_ss0_a { + mux { + groups = "spi1_ss0_a"; + function = "spi1"; + }; + }; + + spi1_ss1_pins: spi1_ss1 { + mux { + groups = "spi1_ss1"; + function = "spi1"; + }; + }; + + spi1_x_pins: spi1_x { + mux { + groups = "spi1_miso_x", + "spi1_mosi_x", + "spi1_clk_x"; + function = "spi1"; + }; + }; + + spi1_ss0_x_pins: spi1_ss0_x { + mux { + groups = "spi1_ss0_x"; + function = "spi1"; + }; + }; + }; + }; + sram: sram@fffc0000 { compatible = "amlogic,meson-axg-sram", "mmio-sram"; reg = <0x0 0xfffc0000 0x0 0x20000>; @@ -175,18 +465,56 @@ }; }; - aobus: aobus@ff800000 { + aobus: bus@ff800000 { compatible = "simple-bus"; reg = <0x0 0xff800000 0x0 0x100000>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; + pinctrl_aobus: pinctrl@14 { + compatible = "amlogic,meson-axg-aobus-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio_ao: bank@14 { + reg = <0x0 0x00014 0x0 0x8>, + <0x0 0x0002c 0x0 0x4>, + <0x0 0x00024 0x0 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 0 15>; + }; + + remote_input_ao_pins: remote_input_ao { + mux { + groups = "remote_input_ao"; + function = "remote_input_ao"; + }; + }; + }; + + pwm_AO_ab: pwm@7000 { + compatible = "amlogic,meson-axg-ao-pwm"; + reg = <0x0 0x07000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_AO_cd: pwm@2000 { + compatible = "amlogic,axg-ao-pwm"; + reg = <0x0 0x02000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + uart_AO: serial@3000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; @@ -195,10 +523,17 @@ compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x4000 0x0 0x18>; interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; + + ir: ir@8000 { + compatible = "amlogic,meson-gxbb-ir"; + reg = <0x0 0x8000 0x0 0x20>; + interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 7d4b95e49993..aeb6d21a3bec 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -59,6 +59,18 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + hdmi_5v: regulator-hdmi-5v { + compatible = "regulator-fixed"; + + regulator-name = "HDMI_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index ab7ce1644cdc..6cb3c2a52baf 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -211,7 +211,7 @@ #size-cells = <2>; ranges; - cbus: cbus@c1100000 { + cbus: bus@c1100000 { compatible = "simple-bus"; reg = <0x0 0xc1100000 0x0 0x100000>; #address-cells = <2>; @@ -229,7 +229,7 @@ reset: reset-controller@4404 { compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset"; - reg = <0x0 0x04404 0x0 0x20>; + reg = <0x0 0x04404 0x0 0x9c>; #reset-cells = <1>; }; @@ -366,7 +366,7 @@ }; }; - aobus: aobus@c8100000 { + aobus: bus@c8100000 { compatible = "simple-bus"; reg = <0x0 0xc8100000 0x0 0x100000>; #address-cells = <2>; @@ -377,6 +377,12 @@ compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; reg = <0x0 0x0 0x0 0x100>; + pwrc_vpu: power-controller-vpu { + compatible = "amlogic,meson-gx-pwrc-vpu"; + #power-domain-cells = <0>; + amlogic,hhi-sysctrl = <&sysctrl>; + }; + clkc_AO: clock-controller { compatible = "amlogic,meson-gx-aoclkc"; #clock-cells = <1>; @@ -447,13 +453,18 @@ }; }; - hiubus: hiubus@c883c000 { + hiubus: bus@c883c000 { compatible = "simple-bus"; reg = <0x0 0xc883c000 0x0 0x2000>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; + sysctrl: system-controller@0 { + compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd"; + reg = <0 0 0 0x400>; + }; + mailbox: mailbox@404 { compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; reg = <0 0x404 0 0x4c>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 4a4251001bfd..011e8e08e429 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -169,6 +169,7 @@ /* Realtek RTL8211F (0x001cc916) */ reg = <0>; interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index f8d221463c60..ee4ada61c59c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -135,6 +135,24 @@ compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; }; ðmac { @@ -156,8 +174,10 @@ #size-cells = <0>; eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; eee-broken-1000t; }; @@ -179,6 +199,18 @@ }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &i2c_A { status = "okay"; pinctrl-0 = <&i2c_a_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts index 9bf16bb7c491..09f34f7ef084 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -118,6 +118,7 @@ /* Micrel KSZ9031 (0x00221620) */ reg = <3>; interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 1fb8b9d6cb4e..3290a4dc3522 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -694,14 +694,55 @@ }; }; +&pwrc_vpu { + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_BT656>, + <&reset RESET_DVIN_RESET>, + <&reset RESET_RDMA>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC>, + <&reset RESET_VDI6>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + /* + * VPU clocking is provided by two identical clock paths + * VPU_0 and VPU_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + * Same for VAPB but with a final gate after the glitch free mux. + */ + assigned-clocks = <&clkc CLKID_VPU_0_SEL>, + <&clkc CLKID_VPU_0>, + <&clkc CLKID_VPU>, /* Glitch free mux */ + <&clkc CLKID_VAPB_0_SEL>, + <&clkc CLKID_VAPB_0>, + <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_VPU_0>, + <&clkc CLKID_FCLK_DIV4>, + <0>, /* Do Nothing */ + <&clkc CLKID_VAPB_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>, /* Do Nothing */ + <0>, /* Do Nothing */ + <250000000>, + <0>; /* Do Nothing */ +}; + &saradc { compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc"; clocks = <&xtal>, <&clkc CLKID_SAR_ADC>, - <&clkc CLKID_SANA>, <&clkc CLKID_SAR_ADC_CLK>, <&clkc CLKID_SAR_ADC_SEL>; - clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel"; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; }; &sd_emmc_a { @@ -763,4 +804,5 @@ &vpu { compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; + power-domains = <&pwrc_vpu>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index dc9c3b8216c2..9671f1e3c74a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -72,6 +72,18 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + hdmi_5v: regulator-hdmi-5v { + compatible = "regulator-fixed"; + + regulator-name = "HDMI_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + vcc_3v3: regulator-vcc_3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index ff09df1fd5a3..7005068346a0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -28,6 +28,18 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + hdmi_5v: regulator-hdmi-5v { + compatible = "regulator-fixed"; + + regulator-name = "HDMI_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 6524b89e7115..4f355f17eed6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -644,14 +644,55 @@ }; }; +&pwrc_vpu { + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_BT656>, + <&reset RESET_DVIN_RESET>, + <&reset RESET_RDMA>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC>, + <&reset RESET_VDI6>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + /* + * VPU clocking is provided by two identical clock paths + * VPU_0 and VPU_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + * Same for VAPB but with a final gate after the glitch free mux. + */ + assigned-clocks = <&clkc CLKID_VPU_0_SEL>, + <&clkc CLKID_VPU_0>, + <&clkc CLKID_VPU>, /* Glitch free mux */ + <&clkc CLKID_VAPB_0_SEL>, + <&clkc CLKID_VAPB_0>, + <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_VPU_0>, + <&clkc CLKID_FCLK_DIV4>, + <0>, /* Do Nothing */ + <&clkc CLKID_VAPB_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>, /* Do Nothing */ + <0>, /* Do Nothing */ + <250000000>, + <0>; /* Do Nothing */ +}; + &saradc { compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc"; clocks = <&xtal>, <&clkc CLKID_SAR_ADC>, - <&clkc CLKID_SANA>, <&clkc CLKID_SAR_ADC_CLK>, <&clkc CLKID_SAR_ADC_SEL>; - clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel"; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; }; &sd_emmc_a { @@ -713,4 +754,5 @@ &vpu { compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; + power-domains = <&pwrc_vpu>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 34a41b26a4ed..1448c3dba08e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -153,6 +153,18 @@ }; }; + hdmi_5v: regulator-hdmi-5v { + compatible = "regulator-fixed"; + + regulator-name = "HDMI_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + vcc_3v3: regulator-vcc_3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; @@ -232,6 +244,9 @@ external_phy: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts index 66c6da7e112c..388fac4f2d97 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts @@ -111,7 +111,8 @@ reg = <0>; max-speed = <1000>; interrupt-parent = <&gpio_intc>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi index ec11343dc528..d77b88af9582 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos5433 SoC Memory interface and AMBA bus device tree source * * Copyright (c) 2016 Samsung Electronics Co., Ltd. * Chanwoo Choi <cw00.choi@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &soc { diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi index 50403700274b..9df7c65593a1 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos5433 SoC pin-mux and pin-config device tree source * @@ -6,10 +7,6 @@ * * Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device * tree nodes are listed in this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/pinctrl/samsung.h> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 297597442c44..a77462da4a36 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG Exynos5433 TM2 board device tree source * @@ -5,10 +6,6 @@ * * Common device tree source file for Samsung's TM2 and TM2E boards * which are based on Samsung Exynos5433 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; @@ -741,6 +738,19 @@ }; }; +&hsi2c_4 { + status = "okay"; + + s3fwrn5: nfc@27 { + compatible = "samsung,s3fwrn5-i2c"; + reg = <0x27>; + interrupt-parent = <&gpa1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>; + s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; + }; +}; + &hsi2c_5 { status = "okay"; @@ -756,6 +766,7 @@ &hsi2c_7 { status = "okay"; + clock-frequency = <1000000>; sii8620@39 { reg = <0x39>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index 23191eb9397c..3d7e0a782243 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG Exynos5433 TM2 board device tree source * @@ -5,10 +6,6 @@ * * Device tree source file for Samsung's TM2 board which is based on * Samsung Exynos5433 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "exynos5433-tm2-common.dtsi" diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts index b73e1231a86f..1e207ce8b97b 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG Exynos5433 TM2E board device tree source * @@ -5,10 +6,6 @@ * * Device tree source file for Samsung's TM2E(TM2 EDGE) board which is based on * Samsung Exynos5433 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "exynos5433-tm2-common.dtsi" diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi index 9be2978f1b9a..f0803575fd9f 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device tree sources for Exynos5433 TMU sensor configuration * * Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/thermal/thermal_exynos.h> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi index 125fe58d77ce..cccae662228a 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device tree sources for Exynos5433 TMU sensor configuration * * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/thermal/thermal_exynos.h> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi index ceaa05145b8a..fe3a0b14bee6 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device tree sources for Exynos5433 thermal zone * * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/thermal/thermal.h> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 7fe994b750da..62f276970174 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos5433 SoC device tree source * @@ -10,10 +11,6 @@ * Note: This file does not include device nodes for all the controllers in * Exynos5433 SoC. As device tree coverage for Exynos5433 increases, * additional nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/clock/exynos5433.h> @@ -247,6 +244,24 @@ #size-cells = <1>; ranges = <0x0 0x0 0x0 0x18000000>; + arm_a53_pmu { + compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + arm_a57_pmu { + compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + }; + chipid@10000000 { compatible = "samsung,exynos4210-chipid"; reg = <0x10000000 0x100>; @@ -343,6 +358,7 @@ clocks = <&xxti>, <&cmu_top CLK_ACLK_G2D_266>, <&cmu_top CLK_ACLK_G2D_400>; + power-domains = <&pd_g2d>; }; cmu_disp: clock-controller@13b90000 { @@ -368,6 +384,7 @@ <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, <&cmu_mif CLK_ACLK_DISP_333>; + power-domains = <&pd_disp>; }; cmu_aud: clock-controller@114c0000 { @@ -376,6 +393,7 @@ #clock-cells = <1>; clock-names = "oscclk", "fout_aud_pll"; clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>; + power-domains = <&pd_aud>; }; cmu_bus0: clock-controller@13600000 { @@ -412,6 +430,7 @@ clock-names = "oscclk", "aclk_g3d_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; + power-domains = <&pd_g3d>; }; cmu_gscl: clock-controller@13cf0000 { @@ -425,6 +444,7 @@ clocks = <&xxti>, <&cmu_top CLK_ACLK_GSCL_111>, <&cmu_top CLK_ACLK_GSCL_333>; + power-domains = <&pd_gscl>; }; cmu_apollo: clock-controller@11900000 { @@ -445,7 +465,7 @@ clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; }; - cmu_mscl: clock-controller@105d0000 { + cmu_mscl: clock-controller@150d0000 { compatible = "samsung,exynos5433-cmu-mscl"; reg = <0x150d0000 0x1000>; #clock-cells = <1>; @@ -456,6 +476,7 @@ clocks = <&xxti>, <&cmu_top CLK_SCLK_JPEG_MSCL>, <&cmu_top CLK_ACLK_MSCL_400>; + power-domains = <&pd_mscl>; }; cmu_mfc: clock-controller@15280000 { @@ -465,6 +486,7 @@ clock-names = "oscclk", "aclk_mfc_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; + power-domains = <&pd_mfc>; }; cmu_hevc: clock-controller@14f80000 { @@ -474,6 +496,7 @@ clock-names = "oscclk", "aclk_hevc_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; + power-domains = <&pd_hevc>; }; cmu_isp: clock-controller@146d0000 { @@ -487,6 +510,7 @@ clocks = <&xxti>, <&cmu_top CLK_ACLK_ISP_DIS_400>, <&cmu_top CLK_ACLK_ISP_400>; + power-domains = <&pd_isp>; }; cmu_cam0: clock-controller@120d0000 { @@ -502,6 +526,7 @@ <&cmu_top CLK_ACLK_CAM0_333>, <&cmu_top CLK_ACLK_CAM0_400>, <&cmu_top CLK_ACLK_CAM0_552>; + power-domains = <&pd_cam0>; }; cmu_cam1: clock-controller@145d0000 { @@ -523,6 +548,86 @@ <&cmu_top CLK_ACLK_CAM1_333>, <&cmu_top CLK_ACLK_CAM1_400>, <&cmu_top CLK_ACLK_CAM1_552>; + power-domains = <&pd_cam1>; + }; + + pd_gscl: power-domain@105c4000 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c4000 0x20>; + #power-domain-cells = <0>; + label = "GSCL"; + }; + + pd_cam0: power-domain@105c4020 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c4020 0x20>; + #power-domain-cells = <0>; + power-domains = <&pd_cam1>; + label = "CAM0"; + }; + + pd_mscl: power-domain@105c4040 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c4040 0x20>; + #power-domain-cells = <0>; + label = "MSCL"; + }; + + pd_g3d: power-domain@105c4060 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c4060 0x20>; + #power-domain-cells = <0>; + label = "G3D"; + }; + + pd_disp: power-domain@105c4080 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c4080 0x20>; + #power-domain-cells = <0>; + label = "DISP"; + }; + + pd_cam1: power-domain@105c40a0 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c40a0 0x20>; + #power-domain-cells = <0>; + label = "CAM1"; + }; + + pd_aud: power-domain@105c40c0 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c40c0 0x20>; + #power-domain-cells = <0>; + label = "AUD"; + }; + + pd_g2d: power-domain@105c4120 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c4120 0x20>; + #power-domain-cells = <0>; + label = "G2D"; + }; + + pd_isp: power-domain@105c4140 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c4140 0x20>; + #power-domain-cells = <0>; + power-domains = <&pd_cam0>; + label = "ISP"; + }; + + pd_mfc: power-domain@105c4180 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c4180 0x20>; + #power-domain-cells = <0>; + label = "MFC"; + }; + + pd_hevc: power-domain@105c41c0 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c41c0 0x20>; + #power-domain-cells = <0>; + label = "HEVC"; }; tmu_atlas0: tmu@10060000 { @@ -637,6 +742,7 @@ compatible = "samsung,exynos5433-pinctrl"; reg = <0x114b0000 0x1000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_aud>; }; pinctrl_cpif: pinctrl@10fe0000 { @@ -728,6 +834,7 @@ clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x", "pclk_smmu_decon0x", "sclk_decon_vclk", "sclk_decon_eclk"; + power-domains = <&pd_disp>; interrupt-names = "fifo", "vsync", "lcd_sys"; interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, @@ -765,6 +872,7 @@ "aclk_xiu_decon0x", "pclk_smmu_decon0x", "sclk_decon_vclk", "sclk_decon_eclk"; samsung,disp-sysreg = <&syscon_disp>; + power-domains = <&pd_disp>; interrupt-names = "fifo", "vsync", "lcd_sys"; interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, @@ -790,6 +898,7 @@ "phyclk_mipidphy0_rxclkesc0", "sclk_rgb_vclk_to_dsim0", "sclk_mipi"; + power-domains = <&pd_disp>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -813,6 +922,7 @@ clocks = <&cmu_disp CLK_PCLK_MIC0>, <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>; clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0"; + power-domains = <&pd_disp>; samsung,disp-syscon = <&syscon_disp>; status = "disabled"; @@ -881,7 +991,7 @@ reg = <0x145f0000 0x1038>; }; - gsc_0: video-scaler@13C00000 { + gsc_0: video-scaler@13c00000 { compatible = "samsung,exynos5433-gsc"; reg = <0x13c00000 0x1000>; interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; @@ -892,9 +1002,10 @@ <&cmu_gscl CLK_ACLK_XIU_GSCLX>, <&cmu_gscl CLK_ACLK_GSCLBEND_333>; iommus = <&sysmmu_gscl0>; + power-domains = <&pd_gscl>; }; - gsc_1: video-scaler@13C10000 { + gsc_1: video-scaler@13c10000 { compatible = "samsung,exynos5433-gsc"; reg = <0x13c10000 0x1000>; interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; @@ -905,9 +1016,10 @@ <&cmu_gscl CLK_ACLK_XIU_GSCLX>, <&cmu_gscl CLK_ACLK_GSCLBEND_333>; iommus = <&sysmmu_gscl1>; + power-domains = <&pd_gscl>; }; - gsc_2: video-scaler@13C20000 { + gsc_2: video-scaler@13c20000 { compatible = "samsung,exynos5433-gsc"; reg = <0x13c20000 0x1000>; interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; @@ -918,6 +1030,7 @@ <&cmu_gscl CLK_ACLK_XIU_GSCLX>, <&cmu_gscl CLK_ACLK_GSCLBEND_333>; iommus = <&sysmmu_gscl2>; + power-domains = <&pd_gscl>; }; jpeg: codec@15020000 { @@ -930,9 +1043,10 @@ <&cmu_mscl CLK_ACLK_XIU_MSCLX>, <&cmu_mscl CLK_SCLK_JPEG>; iommus = <&sysmmu_jpeg>; + power-domains = <&pd_mscl>; }; - mfc: codec@152E0000 { + mfc: codec@152e0000 { compatible = "samsung,exynos5433-mfc"; reg = <0x152E0000 0x10000>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; @@ -942,6 +1056,7 @@ <&cmu_mfc CLK_ACLK_XIU_MFCX>; iommus = <&sysmmu_mfc_0>, <&sysmmu_mfc_1>; iommu-names = "left", "right"; + power-domains = <&pd_mfc>; }; sysmmu_decon0x: sysmmu@13a00000 { @@ -951,6 +1066,7 @@ clock-names = "pclk", "aclk"; clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>; + power-domains = <&pd_disp>; #iommu-cells = <0>; }; @@ -962,6 +1078,7 @@ clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>, <&cmu_disp CLK_ACLK_SMMU_DECON1X>; #iommu-cells = <0>; + power-domains = <&pd_disp>; }; sysmmu_tv0x: sysmmu@13a20000 { @@ -972,6 +1089,7 @@ clocks = <&cmu_disp CLK_PCLK_SMMU_TV0X>, <&cmu_disp CLK_ACLK_SMMU_TV0X>; #iommu-cells = <0>; + power-domains = <&pd_disp>; }; sysmmu_tv1x: sysmmu@13a30000 { @@ -982,6 +1100,7 @@ clocks = <&cmu_disp CLK_PCLK_SMMU_TV1X>, <&cmu_disp CLK_ACLK_SMMU_TV1X>; #iommu-cells = <0>; + power-domains = <&pd_disp>; }; sysmmu_gscl0: sysmmu@13c80000 { @@ -992,6 +1111,7 @@ clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>, <&cmu_gscl CLK_PCLK_SMMU_GSCL0>; #iommu-cells = <0>; + power-domains = <&pd_gscl>; }; sysmmu_gscl1: sysmmu@13c90000 { @@ -1002,6 +1122,7 @@ clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>, <&cmu_gscl CLK_PCLK_SMMU_GSCL1>; #iommu-cells = <0>; + power-domains = <&pd_gscl>; }; sysmmu_gscl2: sysmmu@13ca0000 { @@ -1012,6 +1133,7 @@ clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>, <&cmu_gscl CLK_PCLK_SMMU_GSCL2>; #iommu-cells = <0>; + power-domains = <&pd_gscl>; }; sysmmu_jpeg: sysmmu@15060000 { @@ -1022,6 +1144,7 @@ clocks = <&cmu_mscl CLK_PCLK_SMMU_JPEG>, <&cmu_mscl CLK_ACLK_SMMU_JPEG>; #iommu-cells = <0>; + power-domains = <&pd_mscl>; }; sysmmu_mfc_0: sysmmu@15200000 { @@ -1032,6 +1155,7 @@ clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_0>, <&cmu_mfc CLK_ACLK_SMMU_MFC_0>; #iommu-cells = <0>; + power-domains = <&pd_mfc>; }; sysmmu_mfc_1: sysmmu@15210000 { @@ -1042,6 +1166,7 @@ clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_1>, <&cmu_mfc CLK_ACLK_SMMU_MFC_1>; #iommu-cells = <0>; + power-domains = <&pd_mfc>; }; serial_0: serial@14c10000 { @@ -1497,6 +1622,7 @@ clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>; clock-names = "sfr0_ctrl"; samsung,pmu-syscon = <&pmu_system_controller>; + power-domains = <&pd_aud>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1510,6 +1636,7 @@ #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; + power-domains = <&pd_aud>; }; i2s0: i2s0@11440000 { @@ -1526,6 +1653,7 @@ clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; + power-domains = <&pd_aud>; status = "disabled"; }; @@ -1538,6 +1666,7 @@ clock-names = "uart", "clk_uart_baud0"; pinctrl-names = "default"; pinctrl-0 = <&uart_aud_bus>; + power-domains = <&pd_aud>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 4a8b1fb51243..22723527e626 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG Exynos7 Espresso board device tree source * * Copyright (c) 2014 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos7.dtsi" diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi index 8f58850cd28c..472dd649aa7e 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos7 SoC pin-mux and pin-config device tree source * @@ -6,11 +7,7 @@ * * Samsung's Exynos7 SoC pin-mux and pin-config options are listed as * device tree nodes in this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <dt-bindings/pinctrl/samsung.h> diff --git a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi index 1d6dcf2aadba..48494710b7b2 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device tree sources for Exynos7 TMU sensor configuration * * Copyright (c) 2016 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <dt-bindings/thermal/thermal_exynos.h> diff --git a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi index 062358355a53..d3301b8bd364 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device tree sources for default Exynos7 thermal zone definition * * Copyright (c) 2016 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ trips { diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 9a3fbed1765a..ad9dce6894ce 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG EXYNOS7 SoC device tree source * * Copyright (c) 2014 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/clock/exynos7-clk.h> @@ -103,7 +100,7 @@ #size-cells = <1>; ranges; - pdma0: pdma@10E10000 { + pdma0: pdma@10e10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10E10000 0x1000>; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; @@ -114,7 +111,7 @@ #dma-requests = <32>; }; - pdma1: pdma@10EB0000 { + pdma1: pdma@10eb0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10EB0000 0x1000>; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 0f6fcda36b9e..4f17601b919c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -125,3 +125,11 @@ &sata { status = "okay"; }; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index bd80e9a2e67c..4fc150cd4ca5 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -166,6 +166,77 @@ <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ }; + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + msi-parent = <&its>; + #address-cells = <3>; + #size-cells = <1>; + + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; + + dpmacs { + #address-cells = <1>; + #size-cells = <0>; + + dpmac1: dpmac@1 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <1>; + }; + + dpmac2: dpmac@2 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <2>; + }; + + dpmac3: dpmac@3 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <3>; + }; + + dpmac4: dpmac@4 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <4>; + }; + + dpmac5: dpmac@5 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <5>; + }; + + dpmac6: dpmac@6 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <6>; + }; + + dpmac7: dpmac@7 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <7>; + }; + + dpmac8: dpmac@8 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <8>; + }; + + dpmac9: dpmac@9 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <9>; + }; + + dpmac10: dpmac@a { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xa>; + }; + }; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -191,6 +262,12 @@ clocks = <&sysclk>; }; + dcfg: dcfg@1e00000 { + compatible = "fsl,ls1088a-dcfg", "syscon"; + reg = <0x0 0x1e00000 0x0 0x10000>; + little-endian; + }; + tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; @@ -394,6 +471,26 @@ status = "disabled"; }; + usb0: usb3@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + status = "disabled"; + }; + + usb1: usb3@3110000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + status = "disabled"; + }; + sata: sata@3200000 { compatible = "fsl,ls1088a-ahci"; reg = <0x0 0x3200000 0x0 0x10000>, diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index 9a1d0d2ab1c3..5498c705ae6a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -95,6 +95,18 @@ }; }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + }; + i2c@3 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index 97d768730952..c6999624ed8a 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -109,6 +109,7 @@ label = "user_led4"; /* gpio_190_user_led4 */ gpios = <&gpio23 6 0>; + panic-indicator; linux,default-trigger = "cpu0"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index ab0b95ba5ae5..63d4f9dca77f 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -61,6 +61,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; }; cpu1: cpu@1 { @@ -70,6 +71,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; }; cpu2: cpu@2 { @@ -79,6 +81,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; }; cpu3: cpu@3 { @@ -88,6 +91,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; }; cpu4: cpu@100 { @@ -101,6 +105,7 @@ &CPU_SLEEP &CLUSTER_SLEEP_1 >; + capacity-dmips-mhz = <1024>; }; cpu5: cpu@101 { @@ -114,6 +119,7 @@ &CPU_SLEEP &CLUSTER_SLEEP_1 >; + capacity-dmips-mhz = <1024>; }; cpu6: cpu@102 { @@ -127,6 +133,7 @@ &CPU_SLEEP &CLUSTER_SLEEP_1 >; + capacity-dmips-mhz = <1024>; }; cpu7: cpu@103 { @@ -140,6 +147,7 @@ &CPU_SLEEP &CLUSTER_SLEEP_1 >; + capacity-dmips-mhz = <1024>; }; idle-states { @@ -203,21 +211,25 @@ IRQ_TYPE_LEVEL_HIGH)>; }; - pmu { - compatible = "arm,armv8-pmuv3"; + a53-pmu { + compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, - <&cpu3>, - <&cpu4>, + <&cpu3>; + }; + + a73-pmu { + compatible = "arm,cortex-a73-pmu"; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts index a6fd13389f8d..4d5d644abb12 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts @@ -146,6 +146,12 @@ status = "okay"; }; +&sd0 { + bus-width = <4>; + cap-sd-highspeed; + status = "okay"; +}; + &spi0 { status = "okay"; label = "LS-SPI0"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi index 75865f8a862a..962bd79139e4 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi @@ -192,6 +192,18 @@ status = "disabled"; }; + sd0: mmc@9820000 { + compatible = "snps,dw-mshc"; + reg = <0x9820000 0x10000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HISTB_SDIO0_CIU_CLK>, + <&crg HISTB_SDIO0_BIU_CLK>; + clock-names = "ciu", "biu"; + resets = <&crg 0x9c 4>; + reset-names = "reset"; + status = "disabled"; + }; + emmc: mmc@9830000 { compatible = "snps,dw-mshc"; reg = <0x9830000 0x10000>; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 3aee6123d161..e94fa1a53192 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -359,6 +359,7 @@ user_led1 { label = "user_led1"; gpios = <&gpio4 3 0>; /* <&gpio_user_led_4>; */ + panic-indicator; linux,default-trigger = "cpu0"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi index 59d7557d3b1b..2554e0baea6b 100644 --- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi @@ -56,6 +56,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53","arm,armv8"; reg = <0x1>; + clocks = <&nb_periph_clk 16>; enable-method = "psci"; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 90c26d616a54..375026867342 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -65,6 +65,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0>; + clocks = <&nb_periph_clk 16>; enable-method = "psci"; }; }; @@ -234,6 +235,12 @@ }; }; + nb_pm: syscon@14000 { + compatible = "marvell,armada-3700-nb-pm", + "syscon"; + reg = <0x14000 0x60>; + }; + pinctrl_sb: pinctrl@18800 { compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd"; @@ -309,6 +316,20 @@ }; }; + crypto: crypto@90000 { + compatible = "inside-secure,safexcel-eip97"; + reg = <0x90000 0x20000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mem", "ring0", "ring1", + "ring2", "ring3", "eip"; + clocks = <&nb_periph_clk 15>; + }; + sdhci1: sdhci@d0000 { compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index 52b5341cb270..3ae05eee2c9a 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -61,7 +61,13 @@ reg = <0x0 0x0 0x0 0x80000000>; }; - cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus { + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + }; + + cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus { compatible = "regulator-fixed"; regulator-name = "usb3h0-vbus"; regulator-min-microvolt = <5000000>; @@ -70,7 +76,7 @@ gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; }; - cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus { + cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus { compatible = "regulator-fixed"; regulator-name = "usb3h1-vbus"; regulator-min-microvolt = <5000000>; @@ -79,14 +85,14 @@ gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; }; - cpm_usb3_0_phy: cpm-usb3-0-phy { + cp0_usb3_0_phy: cp0-usb3-0-phy { compatible = "usb-nop-xceiv"; - vcc-supply = <&cpm_reg_usb3_0_vbus>; + vcc-supply = <&cp0_reg_usb3_0_vbus>; }; - cpm_usb3_1_phy: cpm-usb3-1-phy { + cp0_usb3_1_phy: cp0-usb3-1-phy { compatible = "usb-nop-xceiv"; - vcc-supply = <&cpm_reg_usb3_1_vbus>; + vcc-supply = <&cp0_reg_usb3_1_vbus>; }; }; @@ -129,11 +135,11 @@ }; -&cpm_pcie2 { +&cp0_pcie2 { status = "okay"; }; -&cpm_i2c0 { +&cp0_i2c0 { status = "okay"; clock-frequency = <100000>; @@ -156,7 +162,7 @@ }; }; -&cpm_nand { +&cp0_nand { /* * SPI on CPM and NAND have common pins on this board. We can * use only one at a time. To enable the NAND (whihch will @@ -186,7 +192,7 @@ }; -&cpm_spi1 { +&cp0_spi1 { status = "okay"; spi-flash@0 { @@ -214,17 +220,17 @@ }; }; -&cpm_sata0 { +&cp0_sata0 { status = "okay"; }; -&cpm_usb3_0 { - usb-phy = <&cpm_usb3_0_phy>; +&cp0_usb3_0 { + usb-phy = <&cp0_usb3_0_phy>; status = "okay"; }; -&cpm_usb3_1 { - usb-phy = <&cpm_usb3_1_phy>; +&cp0_usb3_1 { + usb-phy = <&cp0_usb3_1_phy>; status = "okay"; }; @@ -235,14 +241,14 @@ non-removable; }; -&cpm_sdhci0 { +&cp0_sdhci0 { status = "okay"; bus-width = <4>; no-1-8-v; cd-gpios = <&expander0 12 GPIO_ACTIVE_LOW>; }; -&cpm_mdio { +&cp0_mdio { status = "okay"; phy0: ethernet-phy@0 { @@ -253,28 +259,28 @@ }; }; -&cpm_ethernet { +&cp0_ethernet { status = "okay"; }; -&cpm_eth0 { +&cp0_eth0 { status = "okay"; /* Network PHY */ phy-mode = "10gbase-kr"; /* Generic PHY, providing serdes lanes */ - phys = <&cpm_comphy2 0>; + phys = <&cp0_comphy2 0>; }; -&cpm_eth1 { +&cp0_eth1 { status = "okay"; /* Network PHY */ phy = <&phy0>; phy-mode = "sgmii"; /* Generic PHY, providing serdes lanes */ - phys = <&cpm_comphy0 1>; + phys = <&cp0_comphy0 1>; }; -&cpm_eth2 { +&cp0_eth2 { status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi index 0e1a1e5be399..f63b4fbd642b 100644 --- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi @@ -44,25 +44,46 @@ * Device Tree file for the Armada 70x0 SoC */ -#include "armada-cp110-master.dtsi" - / { aliases { - gpio1 = &cpm_gpio1; - gpio2 = &cpm_gpio2; + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; }; }; -&cpm_gpio1 { +/* + * Instantiate the CP110 + */ +#define CP110_NAME cp0 +#define CP110_BASE f2000000 +#define CP110_PCIE_IO_BASE 0xf9000000 +#define CP110_PCIE_MEM_BASE 0xf6000000 +#define CP110_PCIE0_BASE f2600000 +#define CP110_PCIE1_BASE f2620000 +#define CP110_PCIE2_BASE f2640000 + +#include "armada-cp110.dtsi" + +#undef CP110_NAME +#undef CP110_BASE +#undef CP110_PCIE_IO_BASE +#undef CP110_PCIE_MEM_BASE +#undef CP110_PCIE0_BASE +#undef CP110_PCIE1_BASE +#undef CP110_PCIE2_BASE + +&cp0_gpio1 { status = "okay"; }; -&cpm_gpio2 { +&cp0_gpio2 { status = "okay"; }; -&cpm_syscon0 { - cpm_pinctrl: pinctrl { +&cp0_syscon0 { + cp0_pinctrl: pinctrl { compatible = "marvell,armada-7k-pinctrl"; nand_pins: nand-pins { diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi index 0ba0bc942598..3318d6b0214b 100644 --- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi @@ -60,6 +60,6 @@ * oscillator so this one is let enabled. */ -&cpm_rtc { +&cp0_rtc { status = "disabled"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index d97b72bed662..dba55baff20f 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -61,46 +61,53 @@ reg = <0x0 0x0 0x0 0x80000000>; }; - cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus { + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth2; + ethernet2 = &cp1_eth0; + ethernet3 = &cp1_eth1; + }; + + cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus { compatible = "regulator-fixed"; - regulator-name = "cpm-usb3h0-vbus"; + regulator-name = "cp0-usb3h0-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; }; - cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus { + cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus { compatible = "regulator-fixed"; - regulator-name = "cpm-usb3h1-vbus"; + regulator-name = "cp0-usb3h1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; }; - cpm_usb3_0_phy: cpm-usb3-0-phy { + cp0_usb3_0_phy: cp0-usb3-0-phy { compatible = "usb-nop-xceiv"; - vcc-supply = <&cpm_reg_usb3_0_vbus>; + vcc-supply = <&cp0_reg_usb3_0_vbus>; }; - cpm_usb3_1_phy: cpm-usb3-1-phy { + cp0_usb3_1_phy: cp0-usb3-1-phy { compatible = "usb-nop-xceiv"; - vcc-supply = <&cpm_reg_usb3_1_vbus>; + vcc-supply = <&cp0_reg_usb3_1_vbus>; }; - cps_reg_usb3_0_vbus: cps-usb3-0-vbus { + cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus { compatible = "regulator-fixed"; - regulator-name = "cps-usb3h0-vbus"; + regulator-name = "cp1-usb3h0-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&expander1 0 GPIO_ACTIVE_HIGH>; }; - cps_usb3_0_phy: cps-usb3-0-phy { + cp1_usb3_0_phy: cp1-usb3-0-phy { compatible = "usb-nop-xceiv"; - vcc-supply = <&cps_reg_usb3_0_vbus>; + vcc-supply = <&cp1_reg_usb3_0_vbus>; }; }; @@ -144,16 +151,16 @@ }; /* CON6 on CP0 expansion */ -&cpm_pcie0 { +&cp0_pcie0 { status = "okay"; }; /* CON5 on CP0 expansion */ -&cpm_pcie2 { +&cp0_pcie2 { status = "okay"; }; -&cpm_i2c0 { +&cp0_i2c0 { status = "okay"; clock-frequency = <100000>; @@ -178,23 +185,23 @@ }; /* CON4 on CP0 expansion */ -&cpm_sata0 { +&cp0_sata0 { status = "okay"; }; /* CON9 on CP0 expansion */ -&cpm_usb3_0 { - usb-phy = <&cpm_usb3_0_phy>; +&cp0_usb3_0 { + usb-phy = <&cp0_usb3_0_phy>; status = "okay"; }; /* CON10 on CP0 expansion */ -&cpm_usb3_1 { - usb-phy = <&cpm_usb3_1_phy>; +&cp0_usb3_1 { + usb-phy = <&cp0_usb3_1_phy>; status = "okay"; }; -&cpm_mdio { +&cp0_mdio { status = "okay"; phy1: ethernet-phy@1 { @@ -202,42 +209,42 @@ }; }; -&cpm_ethernet { +&cp0_ethernet { status = "okay"; }; -&cpm_eth0 { +&cp0_eth0 { status = "okay"; phy-mode = "10gbase-kr"; }; -&cpm_eth2 { +&cp0_eth2 { status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; }; /* CON6 on CP1 expansion */ -&cps_pcie0 { +&cp1_pcie0 { status = "okay"; }; /* CON7 on CP1 expansion */ -&cps_pcie1 { +&cp1_pcie1 { status = "okay"; }; /* CON5 on CP1 expansion */ -&cps_pcie2 { +&cp1_pcie2 { status = "okay"; }; -&cps_i2c0 { +&cp1_i2c0 { status = "okay"; clock-frequency = <100000>; }; -&cps_spi1 { +&cp1_spi1 { status = "okay"; spi-flash@0 { @@ -268,23 +275,51 @@ }; }; +/* + * Proper NAND usage will require DPR-76 to be in position 1-2, which disables + * MDIO signal of CP1. + */ +&cp1_nand { + num-cs = <1>; + pinctrl-0 = <&nand_pins>, <&nand_rb>; + pinctrl-names = "default"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + marvell,nand-enable-arbiter; + marvell,system-controller = <&cp1_syscon0>; + nand-on-flash-bbt; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "Linux"; + reg = <0x200000 0xe00000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; +}; + /* CON4 on CP1 expansion */ -&cps_sata0 { +&cp1_sata0 { status = "okay"; }; /* CON9 on CP1 expansion */ -&cps_usb3_0 { - usb-phy = <&cps_usb3_0_phy>; +&cp1_usb3_0 { + usb-phy = <&cp1_usb3_0_phy>; status = "okay"; }; /* CON10 on CP1 expansion */ -&cps_usb3_1 { +&cp1_usb3_1 { status = "okay"; }; -&cps_mdio { +&cp1_mdio { status = "okay"; phy0: ethernet-phy@0 { @@ -292,16 +327,16 @@ }; }; -&cps_ethernet { +&cp1_ethernet { status = "okay"; }; -&cps_eth0 { +&cp1_eth0 { status = "okay"; phy-mode = "10gbase-kr"; }; -&cps_eth1 { +&cp1_eth1 { status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; @@ -313,7 +348,7 @@ non-removable; }; -&cpm_sdhci0 { +&cp0_sdhci0 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts index b3350827ee55..626e9d0462c3 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -62,6 +62,12 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp1_eth0; + ethernet2 = &cp1_eth1; + }; + /* Regulator labels correspond with schematics */ v_3_3: regulator-3-3v { compatible = "regulator-fixed"; @@ -84,9 +90,9 @@ v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { compatible = "regulator-fixed"; enable-active-high; - gpio = <&cpm_gpio2 15 GPIO_ACTIVE_HIGH>; + gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&cpm_xhci_vbus_pins>; + pinctrl-0 = <&cp0_xhci_vbus_pins>; regulator-name = "v_5v0_usb3_hst_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -120,17 +126,17 @@ vqmmc-supply = <&v_vddo_h>; }; -&cpm_i2c0 { +&cp0_i2c0 { clock-frequency = <100000>; pinctrl-names = "default"; - pinctrl-0 = <&cpm_i2c0_pins>; + pinctrl-0 = <&cp0_i2c0_pins>; status = "okay"; }; -&cpm_i2c1 { +&cp0_i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; - pinctrl-0 = <&cpm_i2c1_pins>; + pinctrl-0 = <&cp0_i2c1_pins>; status = "okay"; i2c-switch@70 { @@ -157,9 +163,9 @@ }; }; -&cpm_mdio { +&cp0_mdio { pinctrl-names = "default"; - pinctrl-0 = <&cpm_ge_mdio_pins>; + pinctrl-0 = <&cp0_ge_mdio_pins>; status = "okay"; ge_phy: ethernet-phy@0 { @@ -167,44 +173,44 @@ }; }; -&cpm_pcie0 { +&cp0_pcie0 { pinctrl-names = "default"; - pinctrl-0 = <&cpm_pcie_pins>; + pinctrl-0 = <&cp0_pcie_pins>; num-lanes = <4>; num-viewport = <8>; - reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_LOW>; + reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>; status = "okay"; }; -&cpm_pinctrl { - cpm_ge_mdio_pins: ge-mdio-pins { +&cp0_pinctrl { + cp0_ge_mdio_pins: ge-mdio-pins { marvell,pins = "mpp32", "mpp34"; marvell,function = "ge"; }; - cpm_i2c1_pins: i2c1-pins { + cp0_i2c1_pins: i2c1-pins { marvell,pins = "mpp35", "mpp36"; marvell,function = "i2c1"; }; - cpm_i2c0_pins: i2c0-pins { + cp0_i2c0_pins: i2c0-pins { marvell,pins = "mpp37", "mpp38"; marvell,function = "i2c0"; }; - cpm_xhci_vbus_pins: xhci0-vbus-pins { + cp0_xhci_vbus_pins: xhci0-vbus-pins { marvell,pins = "mpp47"; marvell,function = "gpio"; }; - cpm_pcie_pins: pcie-pins { + cp0_pcie_pins: pcie-pins { marvell,pins = "mpp52"; marvell,function = "gpio"; }; - cpm_sdhci_pins: sdhci-pins { + cp0_sdhci_pins: sdhci-pins { marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", "mpp60", "mpp61"; marvell,function = "sdio"; }; }; -&cpm_xmdio { +&cp0_xmdio { status = "okay"; phy0: ethernet-phy@0 { @@ -218,83 +224,83 @@ }; }; -&cpm_ethernet { +&cp0_ethernet { status = "okay"; }; -&cpm_eth0 { +&cp0_eth0 { status = "okay"; /* Network PHY */ phy = <&phy0>; phy-mode = "10gbase-kr"; /* Generic PHY, providing serdes lanes */ - phys = <&cpm_comphy4 0>; + phys = <&cp0_comphy4 0>; }; -&cpm_sata0 { +&cp0_sata0 { /* CPM Lane 0 - U29 */ status = "okay"; }; -&cpm_sdhci0 { +&cp0_sdhci0 { /* U6 */ broken-cd; bus-width = <4>; pinctrl-names = "default"; - pinctrl-0 = <&cpm_sdhci_pins>; + pinctrl-0 = <&cp0_sdhci_pins>; status = "okay"; vqmmc-supply = <&v_3_3>; }; -&cpm_usb3_0 { +&cp0_usb3_0 { /* J38? - USB2.0 only */ status = "okay"; }; -&cpm_usb3_1 { +&cp0_usb3_1 { /* J38? - USB2.0 only */ status = "okay"; }; -&cps_ethernet { +&cp1_ethernet { status = "okay"; }; -&cps_eth0 { +&cp1_eth0 { status = "okay"; /* Network PHY */ phy = <&phy8>; phy-mode = "10gbase-kr"; /* Generic PHY, providing serdes lanes */ - phys = <&cps_comphy4 0>; + phys = <&cp1_comphy4 0>; }; -&cps_eth1 { +&cp1_eth1 { /* CPS Lane 0 - J5 (Gigabit RJ45) */ status = "okay"; /* Network PHY */ phy = <&ge_phy>; phy-mode = "sgmii"; /* Generic PHY, providing serdes lanes */ - phys = <&cps_comphy0 1>; + phys = <&cp1_comphy0 1>; }; -&cps_pinctrl { - cps_spi1_pins: spi1-pins { +&cp1_pinctrl { + cp1_spi1_pins: spi1-pins { marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16"; marvell,function = "spi1"; }; }; -&cps_sata0 { +&cp1_sata0 { /* CPS Lane 1 - U32 */ /* CPS Lane 3 - U31 */ status = "okay"; }; -&cps_spi1 { +&cp1_spi1 { pinctrl-names = "default"; - pinctrl-0 = <&cps_spi1_pins>; + pinctrl-0 = <&cp1_spi1_pins>; status = "okay"; spi-flash@0 { @@ -304,7 +310,7 @@ }; }; -&cps_usb3_0 { +&cp1_usb3_0 { /* CPS Lane 2 - CON7 */ usb-phy = <&usb3h0_phy>; status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi index 60fe84f5cbcc..83d2b40e5981 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi @@ -59,6 +59,6 @@ * disable it. However, the RTC clock in CP slave is connected to the * oscillator so this one is let enabled. */ -&cpm_rtc { +&cp0_rtc { status = "disabled"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi index 666ebe96ba0d..e9c84a1d3c4d 100644 --- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi @@ -44,33 +44,104 @@ * Device Tree file for the Armada 80x0 SoC family */ -#include "armada-cp110-master.dtsi" -#include "armada-cp110-slave.dtsi" - / { aliases { - gpio1 = &cps_gpio1; - gpio2 = &cpm_gpio2; + gpio1 = &cp1_gpio1; + gpio2 = &cp0_gpio2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; + spi3 = &cp1_spi0; + spi4 = &cp1_spi1; }; }; +/* + * Instantiate the master CP110 + */ +#define CP110_NAME cp0 +#define CP110_BASE f2000000 +#define CP110_PCIE_IO_BASE 0xf9000000 +#define CP110_PCIE_MEM_BASE 0xf6000000 +#define CP110_PCIE0_BASE f2600000 +#define CP110_PCIE1_BASE f2620000 +#define CP110_PCIE2_BASE f2640000 + +#include "armada-cp110.dtsi" + +#undef CP110_NAME +#undef CP110_BASE +#undef CP110_PCIE_IO_BASE +#undef CP110_PCIE_MEM_BASE +#undef CP110_PCIE0_BASE +#undef CP110_PCIE1_BASE +#undef CP110_PCIE2_BASE + +/* + * Instantiate the slave CP110 + */ +#define CP110_NAME cp1 +#define CP110_BASE f4000000 +#define CP110_PCIE_IO_BASE 0xfd000000 +#define CP110_PCIE_MEM_BASE 0xfa000000 +#define CP110_PCIE0_BASE f4600000 +#define CP110_PCIE1_BASE f4620000 +#define CP110_PCIE2_BASE f4640000 + +#include "armada-cp110.dtsi" + +#undef CP110_NAME +#undef CP110_BASE +#undef CP110_PCIE_IO_BASE +#undef CP110_PCIE_MEM_BASE +#undef CP110_PCIE0_BASE +#undef CP110_PCIE1_BASE +#undef CP110_PCIE2_BASE + /* The 80x0 has two CP blocks, but uses only one block from each. */ -&cps_gpio1 { +&cp1_gpio1 { status = "okay"; }; -&cpm_gpio2 { +&cp0_gpio2 { status = "okay"; }; -&cpm_syscon0 { - cpm_pinctrl: pinctrl { +&cp0_syscon0 { + cp0_pinctrl: pinctrl { compatible = "marvell,armada-8k-cpm-pinctrl"; }; }; -&cps_syscon0 { - cps_pinctrl: pinctrl { +&cp1_syscon0 { + cp1_pinctrl: pinctrl { compatible = "marvell,armada-8k-cps-pinctrl"; + + nand_pins: nand-pins { + marvell,pins = + "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10", "mpp11", + "mpp15", "mpp16", "mpp17", "mpp18", + "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27"; + marvell,function = "dev"; + }; + + nand_rb: nand-rb { + marvell,pins = "mpp13", "mpp12"; + marvell,function = "nf"; + }; }; }; + +&cp1_crypto { + /* + * The cryptographic engine found on the cp110 + * master is enabled by default at the SoC + * level. Because it is not possible as of now + * to enable two cryptographic engines in + * parallel, disable this one by default. + */ + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 1c4dd8ab9ad5..f9b66b81f9fc 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -58,6 +58,7 @@ serial0 = &uart0; serial1 = &uart1; gpio0 = &ap_gpio; + spi0 = &spi0; }; psci { @@ -203,7 +204,6 @@ reg = <0x510600 0x50>; #address-cells = <1>; #size-cells = <0>; - cell-index = <0>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ap_clk 3>; status = "disabled"; @@ -241,7 +241,7 @@ }; - watchdog: watchdog@600000 { + watchdog: watchdog@610000 { compatible = "arm,sbsa-gwdt"; reg = <0x610000 0x1000>, <0x600000 0x1000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; @@ -285,6 +285,12 @@ gpio-ranges = <&ap_pinctrl 0 0 20>; }; }; + + ap_thermal: thermal@6f808c { + compatible = "marvell,armada-ap806-thermal"; + reg = <0x6f808c 0x4>, + <0x6f8084 0x8>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi new file mode 100644 index 000000000000..c6dd1d81c68d --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + */ + +/* Common definitions used by Armada 7K/8K DTs */ +#define PASTER(x, y) x ## y +#define EVALUATOR(x, y) PASTER(x, y) +#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name)) +#define ADDRESSIFY(addr) EVALUATOR(0x, addr) diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi deleted file mode 100644 index 9c7724e82aff..000000000000 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ /dev/null @@ -1,446 +0,0 @@ -/* - * Copyright (C) 2016 Marvell Technology Group Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * Device Tree file for Marvell Armada CP110 Master. - */ - -#define ICU_GRP_NSR 0x0 - -/ { - cp110-master { - #address-cells = <2>; - #size-cells = <2>; - compatible = "simple-bus"; - interrupt-parent = <&cpm_icu>; - ranges; - - config-space@f2000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0x0 0x0 0xf2000000 0x2000000>; - - cpm_ethernet: ethernet@0 { - compatible = "marvell,armada-7k-pp22"; - reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, - <&cpm_clk 1 5>, <&cpm_clk 1 18>; - clock-names = "pp_clk", "gop_clk", - "mg_clk","axi_clk"; - marvell,system-controller = <&cpm_syscon0>; - status = "disabled"; - dma-coherent; - - cpm_eth0: eth0 { - interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; - port-id = <0>; - gop-port-id = <0>; - status = "disabled"; - }; - - cpm_eth1: eth1 { - interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; - port-id = <1>; - gop-port-id = <2>; - status = "disabled"; - }; - - cpm_eth2: eth2 { - interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; - port-id = <2>; - gop-port-id = <3>; - status = "disabled"; - }; - }; - - cpm_comphy: phy@120000 { - compatible = "marvell,comphy-cp110"; - reg = <0x120000 0x6000>; - marvell,system-controller = <&cpm_syscon0>; - #address-cells = <1>; - #size-cells = <0>; - - cpm_comphy0: phy@0 { - reg = <0>; - #phy-cells = <1>; - }; - - cpm_comphy1: phy@1 { - reg = <1>; - #phy-cells = <1>; - }; - - cpm_comphy2: phy@2 { - reg = <2>; - #phy-cells = <1>; - }; - - cpm_comphy3: phy@3 { - reg = <3>; - #phy-cells = <1>; - }; - - cpm_comphy4: phy@4 { - reg = <4>; - #phy-cells = <1>; - }; - - cpm_comphy5: phy@5 { - reg = <5>; - #phy-cells = <1>; - }; - }; - - cpm_mdio: mdio@12a200 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0x12a200 0x10>; - clocks = <&cpm_clk 1 9>, <&cpm_clk 1 5>, - <&cpm_clk 1 6>, <&cpm_clk 1 18>; - status = "disabled"; - }; - - cpm_xmdio: mdio@12a600 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,xmdio"; - reg = <0x12a600 0x10>; - status = "disabled"; - }; - - cpm_icu: interrupt-controller@1e0000 { - compatible = "marvell,cp110-icu"; - reg = <0x1e0000 0x10>; - #interrupt-cells = <3>; - interrupt-controller; - msi-parent = <&gicp>; - }; - - cpm_rtc: rtc@284000 { - compatible = "marvell,armada-8k-rtc"; - reg = <0x284000 0x20>, <0x284080 0x24>; - reg-names = "rtc", "rtc-soc"; - interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; - }; - - cpm_syscon0: system-controller@440000 { - compatible = "syscon", "simple-mfd"; - reg = <0x440000 0x2000>; - - cpm_clk: clock { - compatible = "marvell,cp110-clock"; - #clock-cells = <2>; - }; - - cpm_gpio1: gpio@100 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x100>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&cpm_pinctrl 0 0 32>; - interrupt-controller; - interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - cpm_gpio2: gpio@140 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x140>; - ngpios = <31>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&cpm_pinctrl 0 32 31>; - interrupt-controller; - interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - }; - - cpm_usb3_0: usb3@500000 { - compatible = "marvell,armada-8k-xhci", - "generic-xhci"; - reg = <0x500000 0x4000>; - dma-coherent; - interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_clk 1 22>; - status = "disabled"; - }; - - cpm_usb3_1: usb3@510000 { - compatible = "marvell,armada-8k-xhci", - "generic-xhci"; - reg = <0x510000 0x4000>; - dma-coherent; - interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_clk 1 23>; - status = "disabled"; - }; - - cpm_sata0: sata@540000 { - compatible = "marvell,armada-8k-ahci", - "generic-ahci"; - reg = <0x540000 0x30000>; - interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_clk 1 15>; - status = "disabled"; - }; - - cpm_xor0: xor@6a0000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x6a0000 0x1000>, - <0x6b0000 0x1000>; - dma-coherent; - msi-parent = <&gic_v2m0>; - clocks = <&cpm_clk 1 8>; - }; - - cpm_xor1: xor@6c0000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x6c0000 0x1000>, - <0x6d0000 0x1000>; - dma-coherent; - msi-parent = <&gic_v2m0>; - clocks = <&cpm_clk 1 7>; - }; - - cpm_spi0: spi@700600 { - compatible = "marvell,armada-380-spi"; - reg = <0x700600 0x50>; - #address-cells = <0x1>; - #size-cells = <0x0>; - cell-index = <1>; - clocks = <&cpm_clk 1 21>; - status = "disabled"; - }; - - cpm_spi1: spi@700680 { - compatible = "marvell,armada-380-spi"; - reg = <0x700680 0x50>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <2>; - clocks = <&cpm_clk 1 21>; - status = "disabled"; - }; - - cpm_i2c0: i2c@701000 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_clk 1 21>; - status = "disabled"; - }; - - cpm_i2c1: i2c@701100 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701100 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_clk 1 21>; - status = "disabled"; - }; - - cpm_nand: nand@720000 { - /* - * Due to the limiation of the pin available - * this controller is only usable on the CPM - * for A7K and on the CPS for A8K. - */ - compatible = "marvell,armada-8k-nand", - "marvell,armada370-nand"; - reg = <0x720000 0x54>; - #address-cells = <1>; - #size-cells = <1>; - interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_clk 1 2>; - marvell,system-controller = <&cpm_syscon0>; - status = "disabled"; - }; - - cpm_trng: trng@760000 { - compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76"; - reg = <0x760000 0x7d>; - interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_clk 1 25>; - status = "okay"; - }; - - cpm_sdhci0: sdhci@780000 { - compatible = "marvell,armada-cp110-sdhci"; - reg = <0x780000 0x300>; - interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core","axi"; - clocks = <&cpm_clk 1 4>, <&cpm_clk 1 18>; - dma-coherent; - status = "disabled"; - }; - - cpm_crypto: crypto@800000 { - compatible = "inside-secure,safexcel-eip197"; - reg = <0x800000 0x200000>; - interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mem", "ring0", "ring1", - "ring2", "ring3", "eip"; - clocks = <&cpm_clk 1 26>; - dma-coherent; - }; - }; - - cpm_pcie0: pcie@f2600000 { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 0xf2600000 0 0x10000>, - <0 0xf6f00000 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 0xf9000000 0 0xf9000000 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; - num-lanes = <1>; - clocks = <&cpm_clk 1 13>; - status = "disabled"; - }; - - cpm_pcie1: pcie@f2620000 { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 0xf2620000 0 0x10000>, - <0 0xf7f00000 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 0xf9010000 0 0xf9010000 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 0xf7000000 0 0xf7000000 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; - - num-lanes = <1>; - clocks = <&cpm_clk 1 11>; - status = "disabled"; - }; - - cpm_pcie2: pcie@f2640000 { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 0xf2640000 0 0x10000>, - <0 0xf8f00000 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 0xf9020000 0 0xf9020000 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 0xf8000000 0 0xf8000000 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; - - num-lanes = <1>; - clocks = <&cpm_clk 1 12>; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi deleted file mode 100644 index 87ac68b2cf37..000000000000 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ /dev/null @@ -1,444 +0,0 @@ -/* - * Copyright (C) 2016 Marvell Technology Group Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * Device Tree file for Marvell Armada CP110 Slave. - */ - -#define ICU_GRP_NSR 0x0 - -/ { - cp110-slave { - #address-cells = <2>; - #size-cells = <2>; - compatible = "simple-bus"; - interrupt-parent = <&cps_icu>; - ranges; - - config-space@f4000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0x0 0x0 0xf4000000 0x2000000>; - - cps_ethernet: ethernet@0 { - compatible = "marvell,armada-7k-pp22"; - reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, - <&cps_clk 1 5>, <&cps_clk 1 18>; - clock-names = "pp_clk", "gop_clk", - "mg_clk", "axi_clk"; - marvell,system-controller = <&cps_syscon0>; - status = "disabled"; - dma-coherent; - - cps_eth0: eth0 { - interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; - port-id = <0>; - gop-port-id = <0>; - status = "disabled"; - }; - - cps_eth1: eth1 { - interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; - port-id = <1>; - gop-port-id = <2>; - status = "disabled"; - }; - - cps_eth2: eth2 { - interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; - port-id = <2>; - gop-port-id = <3>; - status = "disabled"; - }; - }; - - cps_comphy: phy@120000 { - compatible = "marvell,comphy-cp110"; - reg = <0x120000 0x6000>; - marvell,system-controller = <&cps_syscon0>; - #address-cells = <1>; - #size-cells = <0>; - - cps_comphy0: phy@0 { - reg = <0>; - #phy-cells = <1>; - }; - - cps_comphy1: phy@1 { - reg = <1>; - #phy-cells = <1>; - }; - - cps_comphy2: phy@2 { - reg = <2>; - #phy-cells = <1>; - }; - - cps_comphy3: phy@3 { - reg = <3>; - #phy-cells = <1>; - }; - - cps_comphy4: phy@4 { - reg = <4>; - #phy-cells = <1>; - }; - - cps_comphy5: phy@5 { - reg = <5>; - #phy-cells = <1>; - }; - }; - - cps_mdio: mdio@12a200 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0x12a200 0x10>; - clocks = <&cps_clk 1 9>, <&cps_clk 1 5>, - <&cps_clk 1 6>, <&cps_clk 1 18>; - status = "disabled"; - }; - - cps_xmdio: mdio@12a600 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,xmdio"; - reg = <0x12a600 0x10>; - status = "disabled"; - }; - - cps_icu: interrupt-controller@1e0000 { - compatible = "marvell,cp110-icu"; - reg = <0x1e0000 0x10>; - #interrupt-cells = <3>; - interrupt-controller; - msi-parent = <&gicp>; - }; - - cps_rtc: rtc@284000 { - compatible = "marvell,armada-8k-rtc"; - reg = <0x284000 0x20>, <0x284080 0x24>; - reg-names = "rtc", "rtc-soc"; - interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; - }; - - cps_syscon0: system-controller@440000 { - compatible = "syscon", "simple-mfd"; - reg = <0x440000 0x2000>; - - cps_clk: clock { - compatible = "marvell,cp110-clock"; - #clock-cells = <2>; - }; - - cps_gpio1: gpio@100 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x100>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&cps_pinctrl 0 0 32>; - interrupt-controller; - interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - cps_gpio2: gpio@140 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x140>; - ngpios = <31>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&cps_pinctrl 0 32 31>; - interrupt-controller; - interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - }; - - cps_usb3_0: usb3@500000 { - compatible = "marvell,armada-8k-xhci", - "generic-xhci"; - reg = <0x500000 0x4000>; - dma-coherent; - interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_clk 1 22>; - status = "disabled"; - }; - - cps_usb3_1: usb3@510000 { - compatible = "marvell,armada-8k-xhci", - "generic-xhci"; - reg = <0x510000 0x4000>; - dma-coherent; - interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_clk 1 23>; - status = "disabled"; - }; - - cps_sata0: sata@540000 { - compatible = "marvell,armada-8k-ahci", - "generic-ahci"; - reg = <0x540000 0x30000>; - interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_clk 1 15>; - status = "disabled"; - }; - - cps_xor0: xor@6a0000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x6a0000 0x1000>, - <0x6b0000 0x1000>; - dma-coherent; - msi-parent = <&gic_v2m0>; - clocks = <&cps_clk 1 8>; - }; - - cps_xor1: xor@6c0000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x6c0000 0x1000>, - <0x6d0000 0x1000>; - dma-coherent; - msi-parent = <&gic_v2m0>; - clocks = <&cps_clk 1 7>; - }; - - cps_spi0: spi@700600 { - compatible = "marvell,armada-380-spi"; - reg = <0x700600 0x50>; - #address-cells = <0x1>; - #size-cells = <0x0>; - cell-index = <3>; - clocks = <&cps_clk 1 21>; - status = "disabled"; - }; - - cps_spi1: spi@700680 { - compatible = "marvell,armada-380-spi"; - reg = <0x700680 0x50>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <4>; - clocks = <&cps_clk 1 21>; - status = "disabled"; - }; - - cps_i2c0: i2c@701000 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_clk 1 21>; - status = "disabled"; - }; - - cps_i2c1: i2c@701100 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701100 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_clk 1 21>; - status = "disabled"; - }; - - cps_nand: nand@720000 { - /* - * Due to the limiation of the pin available - * this controller is only usable on the CPM - * for A7K and on the CPS for A8K. - */ - compatible = "marvell,armada370-nand", - "marvell,armada370-nand"; - reg = <0x720000 0x54>; - #address-cells = <1>; - #size-cells = <1>; - interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_clk 1 2>; - status = "disabled"; - }; - - cps_trng: trng@760000 { - compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76"; - reg = <0x760000 0x7d>; - interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_clk 1 25>; - status = "okay"; - }; - - cps_crypto: crypto@800000 { - compatible = "inside-secure,safexcel-eip197"; - reg = <0x800000 0x200000>; - interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mem", "ring0", "ring1", - "ring2", "ring3", "eip"; - clocks = <&cps_clk 1 26>; - dma-coherent; - /* - * The cryptographic engine found on the cp110 - * master is enabled by default at the SoC - * level. Because it is not possible as of now - * to enable two cryptographic engines in - * parallel, disable this one by default. - */ - status = "disabled"; - }; - }; - - cps_pcie0: pcie@f4600000 { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 0xf4600000 0 0x10000>, - <0 0xfaf00000 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 0xfd000000 0 0xfd000000 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 0xfa000000 0 0xfa000000 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; - num-lanes = <1>; - clocks = <&cps_clk 1 13>; - status = "disabled"; - }; - - cps_pcie1: pcie@f4620000 { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 0xf4620000 0 0x10000>, - <0 0xfbf00000 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 0xfd010000 0 0xfd010000 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 0xfb000000 0 0xfb000000 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; - - num-lanes = <1>; - clocks = <&cps_clk 1 11>; - status = "disabled"; - }; - - cps_pcie2: pcie@f4640000 { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 0xf4640000 0 0x10000>, - <0 0xfcf00000 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 0xfd020000 0 0xfd020000 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 0xfc000000 0 0xfc000000 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; - - num-lanes = <1>; - clocks = <&cps_clk 1 12>; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi new file mode 100644 index 000000000000..a8af4136dbe7 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -0,0 +1,424 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + */ + +/* + * Device Tree file for Marvell Armada CP110. + */ + +#include <dt-bindings/interrupt-controller/mvebu-icu.h> + +#include "armada-common.dtsi" + +#define CP110_PCIEx_IO_BASE(iface) (CP110_PCIE_IO_BASE + (iface * 0x10000)) +#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIE_MEM_BASE + (iface * 0x1000000)) +#define CP110_PCIEx_CONF_BASE(iface) (CP110_PCIEx_MEM_BASE(iface) + 0xf00000) + +/ { + /* + * The contents of the node are defined below, in order to + * save one indentation level + */ + CP110_NAME: CP110_NAME { }; +}; + +&CP110_NAME { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&CP110_LABEL(icu)>; + ranges; + + config-space@CP110_BASE { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>; + + CP110_LABEL(ethernet): ethernet@0 { + compatible = "marvell,armada-7k-pp22"; + reg = <0x0 0x100000>, <0x129000 0xb000>; + clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>, + <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 18>; + clock-names = "pp_clk", "gop_clk", + "mg_clk", "axi_clk"; + marvell,system-controller = <&CP110_LABEL(syscon0)>; + status = "disabled"; + dma-coherent; + + CP110_LABEL(eth0): eth0 { + interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", + "tx-cpu3", "rx-shared", "link"; + port-id = <0>; + gop-port-id = <0>; + status = "disabled"; + }; + + CP110_LABEL(eth1): eth1 { + interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", + "tx-cpu3", "rx-shared", "link"; + port-id = <1>; + gop-port-id = <2>; + status = "disabled"; + }; + + CP110_LABEL(eth2): eth2 { + interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", + "tx-cpu3", "rx-shared", "link"; + port-id = <2>; + gop-port-id = <3>; + status = "disabled"; + }; + }; + + CP110_LABEL(comphy): phy@120000 { + compatible = "marvell,comphy-cp110"; + reg = <0x120000 0x6000>; + marvell,system-controller = <&CP110_LABEL(syscon0)>; + #address-cells = <1>; + #size-cells = <0>; + + CP110_LABEL(comphy0): phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + CP110_LABEL(comphy1): phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + CP110_LABEL(comphy2): phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + + CP110_LABEL(comphy3): phy@3 { + reg = <3>; + #phy-cells = <1>; + }; + + CP110_LABEL(comphy4): phy@4 { + reg = <4>; + #phy-cells = <1>; + }; + + CP110_LABEL(comphy5): phy@5 { + reg = <5>; + #phy-cells = <1>; + }; + }; + + CP110_LABEL(mdio): mdio@12a200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x12a200 0x10>; + clocks = <&CP110_LABEL(clk) 1 9>, <&CP110_LABEL(clk) 1 5>, + <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>; + status = "disabled"; + }; + + CP110_LABEL(xmdio): mdio@12a600 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,xmdio"; + reg = <0x12a600 0x10>; + status = "disabled"; + }; + + CP110_LABEL(icu): interrupt-controller@1e0000 { + compatible = "marvell,cp110-icu"; + reg = <0x1e0000 0x10>; + #interrupt-cells = <3>; + interrupt-controller; + msi-parent = <&gicp>; + }; + + CP110_LABEL(rtc): rtc@284000 { + compatible = "marvell,armada-8k-rtc"; + reg = <0x284000 0x20>, <0x284080 0x24>; + reg-names = "rtc", "rtc-soc"; + interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; + }; + + CP110_LABEL(thermal): thermal@400078 { + compatible = "marvell,armada-cp110-thermal"; + reg = <0x400078 0x4>, + <0x400070 0x8>; + }; + + CP110_LABEL(syscon0): system-controller@440000 { + compatible = "syscon", "simple-mfd"; + reg = <0x440000 0x2000>; + + CP110_LABEL(clk): clock { + compatible = "marvell,cp110-clock"; + #clock-cells = <2>; + }; + + CP110_LABEL(gpio1): gpio@100 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x100>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>; + interrupt-controller; + interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + CP110_LABEL(gpio2): gpio@140 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x140>; + ngpios = <31>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>; + interrupt-controller; + interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + CP110_LABEL(usb3_0): usb3@500000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x500000 0x4000>; + dma-coherent; + interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP110_LABEL(clk) 1 22>; + status = "disabled"; + }; + + CP110_LABEL(usb3_1): usb3@510000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x510000 0x4000>; + dma-coherent; + interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP110_LABEL(clk) 1 23>; + status = "disabled"; + }; + + CP110_LABEL(sata0): sata@540000 { + compatible = "marvell,armada-8k-ahci", + "generic-ahci"; + reg = <0x540000 0x30000>; + interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP110_LABEL(clk) 1 15>; + status = "disabled"; + }; + + CP110_LABEL(xor0): xor@6a0000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>; + dma-coherent; + msi-parent = <&gic_v2m0>; + clocks = <&CP110_LABEL(clk) 1 8>; + }; + + CP110_LABEL(xor1): xor@6c0000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>; + dma-coherent; + msi-parent = <&gic_v2m0>; + clocks = <&CP110_LABEL(clk) 1 7>; + }; + + CP110_LABEL(spi0): spi@700600 { + compatible = "marvell,armada-380-spi"; + reg = <0x700600 0x50>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clocks = <&CP110_LABEL(clk) 1 21>; + status = "disabled"; + }; + + CP110_LABEL(spi1): spi@700680 { + compatible = "marvell,armada-380-spi"; + reg = <0x700680 0x50>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&CP110_LABEL(clk) 1 21>; + status = "disabled"; + }; + + CP110_LABEL(i2c0): i2c@701000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP110_LABEL(clk) 1 21>; + status = "disabled"; + }; + + CP110_LABEL(i2c1): i2c@701100 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP110_LABEL(clk) 1 21>; + status = "disabled"; + }; + + CP110_LABEL(nand): nand@720000 { + /* + * Due to the limitation of the pins available + * this controller is only usable on the CPM + * for A7K and on the CPS for A8K. + */ + compatible = "marvell,armada-8k-nand", + "marvell,armada370-nand"; + reg = <0x720000 0x54>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP110_LABEL(clk) 1 2>; + marvell,system-controller = <&CP110_LABEL(syscon0)>; + status = "disabled"; + }; + + CP110_LABEL(trng): trng@760000 { + compatible = "marvell,armada-8k-rng", + "inside-secure,safexcel-eip76"; + reg = <0x760000 0x7d>; + interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP110_LABEL(clk) 1 25>; + status = "okay"; + }; + + CP110_LABEL(sdhci0): sdhci@780000 { + compatible = "marvell,armada-cp110-sdhci"; + reg = <0x780000 0x300>; + interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "axi"; + clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>; + dma-coherent; + status = "disabled"; + }; + + CP110_LABEL(crypto): crypto@800000 { + compatible = "inside-secure,safexcel-eip197"; + reg = <0x800000 0x200000>; + interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mem", "ring0", "ring1", + "ring2", "ring3", "eip"; + clocks = <&CP110_LABEL(clk) 1 26>; + dma-coherent; + }; + }; + + CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>, + <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + ranges = + /* downstream I/O */ + <0x81000000 0 CP110_PCIEx_IO_BASE(0) 0 CP110_PCIEx_IO_BASE(0) 0 0x10000 + /* non-prefetchable memory */ + 0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; + num-lanes = <1>; + clocks = <&CP110_LABEL(clk) 1 13>; + status = "disabled"; + }; + + CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>, + <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + ranges = + /* downstream I/O */ + <0x81000000 0 CP110_PCIEx_IO_BASE(1) 0 CP110_PCIEx_IO_BASE(1) 0 0x10000 + /* non-prefetchable memory */ + 0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clocks = <&CP110_LABEL(clk) 1 11>; + status = "disabled"; + }; + + CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>, + <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + ranges = + /* downstream I/O */ + <0x81000000 0 CP110_PCIEx_IO_BASE(2) 0 CP110_PCIEx_IO_BASE(2) 0 0x10000 + /* non-prefetchable memory */ + 0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clocks = <&CP110_LABEL(clk) 1 12>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts index 8c804df3da4e..10f9c76cd105 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts @@ -24,6 +24,33 @@ chosen { stdout-path = "serial0:921600n8"; }; + + cpus_fixed_vproc0: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vproc_buck0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + cpus_fixed_vproc1: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vproc_buck1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + +}; + +&cpu0 { + proc-supply = <&cpus_fixed_vproc0>; +}; + +&cpu1 { + proc-supply = <&cpus_fixed_vproc0>; +}; + +&cpu2 { + proc-supply = <&cpus_fixed_vproc1>; }; &uart0 { diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index 5d4e406bb35d..fdf66f4fe7c3 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -5,8 +5,10 @@ * SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +#include <dt-bindings/clock/mt2712-clk.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/mt2712-power.h> / { compatible = "mediatek,mt2712"; @@ -14,6 +16,48 @@ #address-cells = <2>; #size-cells = <2>; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + opp00 { + opp-hz = /bits/ 64 <598000000>; + opp-microvolt = <1000000>; + }; + opp01 { + opp-hz = /bits/ 64 <702000000>; + opp-microvolt = <1000000>; + }; + opp02 { + opp-hz = /bits/ 64 <793000000>; + opp-microvolt = <1000000>; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + opp00 { + opp-hz = /bits/ 64 <598000000>; + opp-microvolt = <1000000>; + }; + opp01 { + opp-hz = /bits/ 64 <702000000>; + opp-microvolt = <1000000>; + }; + opp02 { + opp-hz = /bits/ 64 <793000000>; + opp-microvolt = <1000000>; + }; + opp03 { + opp-hz = /bits/ 64 <897000000>; + opp-microvolt = <1000000>; + }; + opp04 { + opp-hz = /bits/ 64 <1001000000>; + opp-microvolt = <1000000>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -39,6 +83,11 @@ device_type = "cpu"; compatible = "arm,cortex-a35"; reg = <0x000>; + clocks = <&mcucfg CLK_MCU_MP0_SEL>, + <&topckgen CLK_TOP_F_MP0_PLL1>; + clock-names = "cpu", "intermediate"; + proc-supply = <&cpus_fixed_vproc0>; + operating-points-v2 = <&cluster0_opp>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; @@ -47,6 +96,11 @@ compatible = "arm,cortex-a35"; reg = <0x001>; enable-method = "psci"; + clocks = <&mcucfg CLK_MCU_MP0_SEL>, + <&topckgen CLK_TOP_F_MP0_PLL1>; + clock-names = "cpu", "intermediate"; + proc-supply = <&cpus_fixed_vproc0>; + operating-points-v2 = <&cluster0_opp>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; @@ -55,6 +109,11 @@ compatible = "arm,cortex-a72"; reg = <0x200>; enable-method = "psci"; + clocks = <&mcucfg CLK_MCU_MP2_SEL>, + <&topckgen CLK_TOP_F_BIG_PLL1>; + clock-names = "cpu", "intermediate"; + proc-supply = <&cpus_fixed_vproc1>; + operating-points-v2 = <&cluster1_opp>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; @@ -98,6 +157,48 @@ #clock-cells = <0>; }; + clk26m: oscillator@0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + clk32k: oscillator@1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "clk32k"; + }; + + clkfpc: oscillator@2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "clkfpc"; + }; + + clkaud_ext_i_0: oscillator@3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <6500000>; + clock-output-names = "clkaud_ext_i_0"; + }; + + clkaud_ext_i_1: oscillator@4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <196608000>; + clock-output-names = "clkaud_ext_i_1"; + }; + + clkaud_ext_i_2: oscillator@5 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <180633600>; + clock-output-names = "clkaud_ext_i_2"; + }; + timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; @@ -111,6 +212,39 @@ (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>; }; + topckgen: syscon@10000000 { + compatible = "mediatek,mt2712-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: syscon@10001000 { + compatible = "mediatek,mt2712-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + pericfg: syscon@10003000 { + compatible = "mediatek,mt2712-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + }; + + scpsys: scpsys@10006000 { + compatible = "mediatek,mt2712-scpsys", "syscon"; + #power-domain-cells = <1>; + reg = <0 0x10006000 0 0x1000>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_MFG_SEL>, + <&topckgen CLK_TOP_VENC_SEL>, + <&topckgen CLK_TOP_JPGDEC_SEL>, + <&topckgen CLK_TOP_A1SYS_HP_SEL>, + <&topckgen CLK_TOP_VDEC_SEL>; + clock-names = "mm", "mfg", "venc", + "jpgdec", "audio", "vdec"; + infracfg = <&infracfg>; + }; + uart5: serial@1000f000 { compatible = "mediatek,mt2712-uart", "mediatek,mt6577-uart"; @@ -121,6 +255,18 @@ status = "disabled"; }; + apmixedsys: syscon@10209000 { + compatible = "mediatek,mt2712-apmixedsys", "syscon"; + reg = <0 0x10209000 0 0x1000>; + #clock-cells = <1>; + }; + + mcucfg: syscon@10220000 { + compatible = "mediatek,mt2712-mcucfg", "syscon"; + reg = <0 0x10220000 0 0x1000>; + #clock-cells = <1>; + }; + sysirq: interrupt-controller@10220a80 { compatible = "mediatek,mt2712-sysirq", "mediatek,mt6577-sysirq"; @@ -192,5 +338,47 @@ clock-names = "baud", "bus"; status = "disabled"; }; + + mfgcfg: syscon@13000000 { + compatible = "mediatek,mt2712-mfgcfg", "syscon"; + reg = <0 0x13000000 0 0x1000>; + #clock-cells = <1>; + }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt2712-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys: syscon@15000000 { + compatible = "mediatek,mt2712-imgsys", "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + bdpsys: syscon@15010000 { + compatible = "mediatek,mt2712-bdpsys", "syscon"; + reg = <0 0x15010000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: syscon@16000000 { + compatible = "mediatek,mt2712-vdecsys", "syscon"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: syscon@18000000 { + compatible = "mediatek,mt2712-vencsys", "syscon"; + reg = <0 0x18000000 0 0x1000>; + #clock-cells = <1>; + }; + + jpgdecsys: syscon@19000000 { + compatible = "mediatek,mt2712-jpgdecsys", "syscon"; + reg = <0 0x19000000 0 0x1000>; + #clock-cells = <1>; + }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index 1c3634fa94bf..8e6ada20e6db 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -74,6 +74,24 @@ status = "okay"; }; +&cpu0 { + proc-supply = <&mt6397_vpca15_reg>; +}; + +&cpu1 { + proc-supply = <&mt6397_vpca15_reg>; +}; + +&cpu2 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; +}; + +&cpu3 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; +}; + &dpi0 { status = "okay"; }; @@ -505,7 +523,7 @@ vbus-supply = <&usb_p0_vbus>; extcon = <&extcon_usb>; dr_mode = "otg"; - mediatek,enable-wakeup; + wakeup-source; pinctrl-names = "default", "id_float", "id_ground"; pinctrl-0 = <&usb_id_pins_float>; pinctrl-1 = <&usb_id_pins_float>; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 26396ef53bde..9fbe4705ee88 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -51,6 +51,80 @@ mdp_wrot1 = &mdp_wrot1; }; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + opp-507000000 { + opp-hz = /bits/ 64 <507000000>; + opp-microvolt = <859000>; + }; + opp-702000000 { + opp-hz = /bits/ 64 <702000000>; + opp-microvolt = <908000>; + }; + opp-1001000000 { + opp-hz = /bits/ 64 <1001000000>; + opp-microvolt = <983000>; + }; + opp-1105000000 { + opp-hz = /bits/ 64 <1105000000>; + opp-microvolt = <1009000>; + }; + opp-1209000000 { + opp-hz = /bits/ 64 <1209000000>; + opp-microvolt = <1034000>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1057000>; + }; + opp-1508000000 { + opp-hz = /bits/ 64 <1508000000>; + opp-microvolt = <1109000>; + }; + opp-1703000000 { + opp-hz = /bits/ 64 <1703000000>; + opp-microvolt = <1125000>; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + opp-507000000 { + opp-hz = /bits/ 64 <507000000>; + opp-microvolt = <828000>; + }; + opp-702000000 { + opp-hz = /bits/ 64 <702000000>; + opp-microvolt = <867000>; + }; + opp-1001000000 { + opp-hz = /bits/ 64 <1001000000>; + opp-microvolt = <927000>; + }; + opp-1209000000 { + opp-hz = /bits/ 64 <1209000000>; + opp-microvolt = <968000>; + }; + opp-1404000000 { + opp-hz = /bits/ 64 <1404000000>; + opp-microvolt = <1007000>; + }; + opp-1612000000 { + opp-hz = /bits/ 64 <1612000000>; + opp-microvolt = <1049000>; + }; + opp-1807000000 { + opp-hz = /bits/ 64 <1807000000>; + opp-microvolt = <1089000>; + }; + opp-2106000000 { + opp-hz = /bits/ 64 <2106000000>; + opp-microvolt = <1125000>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -81,6 +155,11 @@ reg = <0x000>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; + #cooling-cells = <2>; + clocks = <&infracfg CLK_INFRA_CA53SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; }; cpu1: cpu@1 { @@ -89,6 +168,10 @@ reg = <0x001>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA53SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; }; cpu2: cpu@100 { @@ -97,6 +180,11 @@ reg = <0x100>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; + #cooling-cells = <2>; + clocks = <&infracfg CLK_INFRA_CA57SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster1_opp>; }; cpu3: cpu@101 { @@ -105,6 +193,10 @@ reg = <0x101>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA57SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster1_opp>; }; idle-states { @@ -731,15 +823,9 @@ <&u3port0 PHY_TYPE_USB3>, <&u2port1 PHY_TYPE_USB2>; power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; - clocks = <&topckgen CLK_TOP_USB30_SEL>, - <&clk26m>, - <&pericfg CLK_PERI_USB0>, - <&pericfg CLK_PERI_USB1>; - clock-names = "sys_ck", - "ref_ck", - "wakeup_deb_p0", - "wakeup_deb_p1"; - mediatek,syscon-wakeup = <&pericfg>; + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; + clock-names = "sys_ck", "ref_ck"; + mediatek,syscon-wakeup = <&pericfg 0x400 1>; #address-cells = <2>; #size-cells = <2>; ranges; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 42a23997dcdb..bd5305a634b1 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -74,6 +74,43 @@ }; }; + host1x@13e00000 { + status = "okay"; + + dpaux@15040000 { + status = "okay"; + }; + + display-hub@15200000 { + status = "okay"; + }; + + dsi@15300000 { + status = "disabled"; + }; + + sor@15540000 { + status = "disabled"; + + nvidia,dpaux = <&dpaux1>; + }; + + sor@15580000 { + status = "okay"; + + avdd-io-supply = <&vdd_hdmi_1v05>; + vdd-pll-supply = <&vdd_1v8_ap>; + hdmi-supply = <&vdd_hdmi>; + + nvidia,ddc-i2c-bus = <&ddc>; + nvidia,hpd-gpio = <&gpio TEGRA_MAIN_GPIO(P, 1) GPIO_ACTIVE_LOW>; + }; + + dpaux@155c0000 { + status = "okay"; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -120,5 +157,19 @@ vin-supply = <&vdd_3v3_sys>; }; + + vdd_hdmi: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + + regulator-name = "VDD_HDMI_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&exp1 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_5v0_sys>; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 54f418d05e15..a8baad7b80df 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -51,6 +51,10 @@ }; }; + memory-controller@2c00000 { + status = "okay"; + }; + serial@3100000 { status = "okay"; }; @@ -73,7 +77,7 @@ status = "okay"; }; - i2c@3190000 { + ddc: i2c@3190000 { status = "okay"; }; @@ -88,7 +92,7 @@ /* SDMMC1 (SD/MMC) */ sdhci@3400000 { cd-gpios = <&gpio TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio TEGRA_MAIN_GPIO(P, 4) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>; vqmmc-supply = <&vddio_sdmmc1>; }; @@ -317,7 +321,7 @@ regulator-max-microvolt = <2800000>; }; - avdd_1v05: ldo7 { + vdd_hdmi_1v05: ldo7 { regulator-name = "VDD_HDMI_1V05"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 46d1f287fb0f..b762227f6aa1 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/gpio/tegra186-gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/tegra186-hsp.h> +#include <dt-bindings/memory/tegra186-mc.h> #include <dt-bindings/power/tegra186-powergate.h> #include <dt-bindings/reset/tegra186-reset.h> #include <dt-bindings/thermal/tegra186-bpmp-thermal.h> @@ -13,6 +14,12 @@ #address-cells = <2>; #size-cells = <2>; + misc@100000 { + compatible = "nvidia,tegra186-misc"; + reg = <0x0 0x00100000 0x0 0xf000>, + <0x0 0x0010f000 0x0 0x1000>; + }; + gpio: gpio@2200000 { compatible = "nvidia,tegra186-gpio"; reg-names = "security", "gpio"; @@ -61,6 +68,12 @@ snps,rxpbl = <8>; }; + memory-controller@2c00000 { + compatible = "nvidia,tegra186-mc"; + reg = <0x0 0x02c00000 0x0 0xb0000>; + status = "disabled"; + }; + uarta: serial@3100000 { compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; reg = <0x0 0x03100000 0x0 0x40>; @@ -259,6 +272,13 @@ status = "disabled"; }; + fuse@3820000 { + compatible = "nvidia,tegra186-efuse"; + reg = <0x0 0x03820000 0x0 0x10000>; + clocks = <&bpmp TEGRA186_CLK_FUSE>; + clock-names = "fuse"; + }; + gic: interrupt-controller@3881000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -437,6 +457,79 @@ }; }; + smmu: iommu@12000000 { + compatible = "arm,mmu-500"; + reg = <0 0x12000000 0 0x800000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + stream-match-mask = <0x7f80>; + #global-interrupts = <1>; + #iommu-cells = <1>; + }; + host1x@13e00000 { compatible = "nvidia,tegra186-host1x", "simple-bus"; reg = <0x0 0x13e00000 0x0 0x10000>, @@ -453,6 +546,129 @@ #size-cells = <1>; ranges = <0x15000000 0x0 0x15000000 0x01000000>; + iommus = <&smmu TEGRA186_SID_HOST1X>; + + dpaux1: dpaux@15040000 { + compatible = "nvidia,tegra186-dpaux"; + reg = <0x15040000 0x10000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_DPAUX1>, + <&bpmp TEGRA186_CLK_PLLDP>; + clock-names = "dpaux", "parent"; + resets = <&bpmp TEGRA186_RESET_DPAUX1>; + reset-names = "dpaux"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + + state_dpaux1_aux: pinmux-aux { + groups = "dpaux-io"; + function = "aux"; + }; + + state_dpaux1_i2c: pinmux-i2c { + groups = "dpaux-io"; + function = "i2c"; + }; + + state_dpaux1_off: pinmux-off { + groups = "dpaux-io"; + function = "off"; + }; + + i2c-bus { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + display-hub@15200000 { + compatible = "nvidia,tegra186-display", "simple-bus"; + resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>, + <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>, + <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP1>, + <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP2>, + <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP3>, + <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP4>, + <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP5>; + reset-names = "misc", "wgrp0", "wgrp1", "wgrp2", + "wgrp3", "wgrp4", "wgrp5"; + clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_DISP>, + <&bpmp TEGRA186_CLK_NVDISPLAY_DSC>, + <&bpmp TEGRA186_CLK_NVDISPLAYHUB>; + clock-names = "disp", "dsc", "hub"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x15200000 0x15200000 0x40000>; + + display@15200000 { + compatible = "nvidia,tegra186-dc"; + reg = <0x15200000 0x10000>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P0>; + clock-names = "dc"; + resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD0>; + reset-names = "dc"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + iommus = <&smmu TEGRA186_SID_NVDISPLAY>; + + nvidia,outputs = <&dsia &dsib &sor0 &sor1>; + nvidia,head = <0>; + }; + + display@15210000 { + compatible = "nvidia,tegra186-dc"; + reg = <0x15210000 0x10000>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P1>; + clock-names = "dc"; + resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD1>; + reset-names = "dc"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPB>; + iommus = <&smmu TEGRA186_SID_NVDISPLAY>; + + nvidia,outputs = <&dsia &dsib &sor0 &sor1>; + nvidia,head = <1>; + }; + + display@15220000 { + compatible = "nvidia,tegra186-dc"; + reg = <0x15220000 0x10000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P2>; + clock-names = "dc"; + resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD2>; + reset-names = "dc"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPC>; + iommus = <&smmu TEGRA186_SID_NVDISPLAY>; + + nvidia,outputs = <&sor0 &sor1>; + nvidia,head = <2>; + }; + }; + + dsia: dsi@15300000 { + compatible = "nvidia,tegra186-dsi"; + reg = <0x15300000 0x10000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_DSI>, + <&bpmp TEGRA186_CLK_DSIA_LP>, + <&bpmp TEGRA186_CLK_PLLD>; + clock-names = "dsi", "lp", "parent"; + resets = <&bpmp TEGRA186_RESET_DSI>; + reset-names = "dsi"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + }; vic@15340000 { compatible = "nvidia,tegra186-vic"; @@ -465,6 +681,141 @@ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_VIC>; }; + + dsib: dsi@15400000 { + compatible = "nvidia,tegra186-dsi"; + reg = <0x15400000 0x10000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_DSIB>, + <&bpmp TEGRA186_CLK_DSIB_LP>, + <&bpmp TEGRA186_CLK_PLLD>; + clock-names = "dsi", "lp", "parent"; + resets = <&bpmp TEGRA186_RESET_DSIB>; + reset-names = "dsi"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + }; + + sor0: sor@15540000 { + compatible = "nvidia,tegra186-sor"; + reg = <0x15540000 0x10000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_SOR0>, + <&bpmp TEGRA186_CLK_SOR0_OUT>, + <&bpmp TEGRA186_CLK_PLLD2>, + <&bpmp TEGRA186_CLK_PLLDP>, + <&bpmp TEGRA186_CLK_SOR_SAFE>, + <&bpmp TEGRA186_CLK_SOR0_PAD_CLKOUT>; + clock-names = "sor", "out", "parent", "dp", "safe", + "pad"; + resets = <&bpmp TEGRA186_RESET_SOR0>; + reset-names = "sor"; + pinctrl-0 = <&state_dpaux_aux>; + pinctrl-1 = <&state_dpaux_i2c>; + pinctrl-2 = <&state_dpaux_off>; + pinctrl-names = "aux", "i2c", "off"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + nvidia,interface = <0>; + }; + + sor1: sor@15580000 { + compatible = "nvidia,tegra186-sor1"; + reg = <0x15580000 0x10000>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_SOR1>, + <&bpmp TEGRA186_CLK_SOR1_OUT>, + <&bpmp TEGRA186_CLK_PLLD3>, + <&bpmp TEGRA186_CLK_PLLDP>, + <&bpmp TEGRA186_CLK_SOR_SAFE>, + <&bpmp TEGRA186_CLK_SOR1_PAD_CLKOUT>; + clock-names = "sor", "out", "parent", "dp", "safe", + "pad"; + resets = <&bpmp TEGRA186_RESET_SOR1>; + reset-names = "sor"; + pinctrl-0 = <&state_dpaux1_aux>; + pinctrl-1 = <&state_dpaux1_i2c>; + pinctrl-2 = <&state_dpaux1_off>; + pinctrl-names = "aux", "i2c", "off"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + nvidia,interface = <1>; + }; + + dpaux: dpaux@155c0000 { + compatible = "nvidia,tegra186-dpaux"; + reg = <0x155c0000 0x10000>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_DPAUX>, + <&bpmp TEGRA186_CLK_PLLDP>; + clock-names = "dpaux", "parent"; + resets = <&bpmp TEGRA186_RESET_DPAUX>; + reset-names = "dpaux"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + + state_dpaux_aux: pinmux-aux { + groups = "dpaux-io"; + function = "aux"; + }; + + state_dpaux_i2c: pinmux-i2c { + groups = "dpaux-io"; + function = "i2c"; + }; + + state_dpaux_off: pinmux-off { + groups = "dpaux-io"; + function = "off"; + }; + + i2c-bus { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + padctl@15880000 { + compatible = "nvidia,tegra186-dsi-padctl"; + reg = <0x15880000 0x10000>; + resets = <&bpmp TEGRA186_RESET_DSI>; + reset-names = "dsi"; + status = "disabled"; + }; + + dsic: dsi@15900000 { + compatible = "nvidia,tegra186-dsi"; + reg = <0x15900000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_DSIC>, + <&bpmp TEGRA186_CLK_DSIC_LP>, + <&bpmp TEGRA186_CLK_PLLD>; + clock-names = "dsi", "lp", "parent"; + resets = <&bpmp TEGRA186_RESET_DSIC>; + reset-names = "dsi"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + }; + + dsid: dsi@15940000 { + compatible = "nvidia,tegra186-dsi"; + reg = <0x15940000 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_DSID>, + <&bpmp TEGRA186_CLK_DSID_LP>, + <&bpmp TEGRA186_CLK_PLLD>; + clock-names = "dsi", "lp", "parent"; + resets = <&bpmp TEGRA186_RESET_DSID>; + reset-names = "dsi"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + }; }; gpu@17000000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index d10d4430537a..212e6634c9ba 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -297,6 +297,29 @@ }; }; + cpus { + cpu@0 { + enable-method = "psci"; + }; + + cpu@1 { + enable-method = "psci"; + }; + + cpu@2 { + enable-method = "psci"; + }; + + cpu@3 { + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + regulators { vdd_gpu: regulator@100 { compatible = "pwm-regulator"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi index be6066ff97c9..d0dc03923723 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi @@ -52,4 +52,27 @@ clock-frequency = <32768>; }; }; + + cpus { + cpu@0 { + enable-method = "psci"; + }; + + cpu@1 { + enable-method = "psci"; + }; + + cpu@2 { + enable-method = "psci"; + }; + + cpu@3 { + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 9bdf19f2cca7..9c2402108772 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -266,11 +266,11 @@ reg = <0x0 0x54580000 0x0 0x00040000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_SOR1>, - <&tegra_car TEGRA210_CLK_SOR1_SRC>, + <&tegra_car TEGRA210_CLK_SOR1_OUT>, <&tegra_car TEGRA210_CLK_PLL_D2_OUT0>, <&tegra_car TEGRA210_CLK_PLL_DP>, <&tegra_car TEGRA210_CLK_SOR_SAFE>; - clock-names = "sor", "source", "parent", "dp", "safe"; + clock-names = "sor", "out", "parent", "dp", "safe"; resets = <&tegra_car 183>; reset-names = "sor"; pinctrl-0 = <&state_dpaux1_aux>; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 33a3297eb284..9ff848792712 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -324,6 +324,7 @@ label = "apq8016-sbc:green:user4"; gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; + panic-indicator; default-state = "off"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 4cb0b5834143..390a2fa28514 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -278,7 +278,7 @@ pinconf { pins = "gpio6", "gpio7"; drive-strength = <16>; - bias-disable = <0>; + bias-disable; }; }; @@ -290,7 +290,7 @@ pinconf { pins = "gpio6", "gpio7"; drive-strength = <2>; - bias-disable = <0>; + bias-disable; }; }; @@ -302,7 +302,7 @@ pinconf { pins = "gpio14", "gpio15"; drive-strength = <16>; - bias-disable = <0>; + bias-disable; }; }; @@ -314,7 +314,7 @@ pinconf { pins = "gpio14", "gpio15"; drive-strength = <2>; - bias-disable = <0>; + bias-disable; }; }; @@ -326,7 +326,7 @@ pinconf { pins = "gpio22", "gpio23"; drive-strength = <16>; - bias-disable = <0>; + bias-disable; }; }; @@ -338,32 +338,7 @@ pinconf { pins = "gpio22", "gpio23"; drive-strength = <2>; - bias-disable = <0>; - }; - }; - - sdhc2_cd_pin { - sdc2_cd_on: cd_on { - pinmux { - function = "gpio"; - pins = "gpio38"; - }; - pinconf { - pins = "gpio38"; - drive-strength = <2>; - bias-pull-up; - }; - }; - sdc2_cd_off: cd_off { - pinmux { - function = "gpio"; - pins = "gpio38"; - }; - pinconf { - pins = "gpio38"; - drive-strength = <2>; - bias-disable; - }; + bias-disable; }; }; @@ -505,26 +480,25 @@ }; }; - ext-codec-lines { - ext_codec_lines_act: lines_on { + pmx_sdc2_cd_pin { + sdc2_cd_on: cd_on { pinmux { function = "gpio"; - pins = "gpio67"; + pins = "gpio38"; }; pinconf { - pins = "gpio67"; - drive-strength = <8>; - bias-disable; - output-high; + pins = "gpio38"; + drive-strength = <2>; + bias-pull-up; }; }; - ext_codec_lines_sus: lines_off { + sdc2_cd_off: cd_off { pinmux { function = "gpio"; - pins = "gpio67"; + pins = "gpio38"; }; pinconf { - pins = "gpio67"; + pins = "gpio38"; drive-strength = <2>; bias-disable; }; @@ -687,34 +661,16 @@ }; }; cdc_dmic_lines_sus: dmic_lines_off { - pinconf { - pins = "gpio0", "gpio1"; - drive-strength = <2>; - bias-disable; - }; - }; - }; - - cross-conn-det { - cross_conn_det_act: lines_on { - pinmux { - function = "gpio"; - pins = "gpio120"; - }; - pinconf { - pins = "gpio120"; - drive-strength = <8>; - output-low; - bias-pull-down; + pinmux_dmic0_clk { + function = "dmic0_clk"; + pins = "gpio0"; }; - }; - cross_conn_det_sus: lines_off { - pinmux { - function = "gpio"; - pins = "gpio120"; + pinmux_dmic0_data { + function = "dmic0_data"; + pins = "gpio1"; }; pinconf { - pins = "gpio120"; + pins = "gpio0", "gpio1"; drive-strength = <2>; bias-disable; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 6b2127a6ced1..e51b04900726 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -355,7 +355,7 @@ blsp_spi1: spi@78b5000 { compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b5000 0x600>; + reg = <0x078b5000 0x500>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; @@ -372,7 +372,7 @@ blsp_spi2: spi@78b6000 { compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b6000 0x600>; + reg = <0x078b6000 0x500>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; @@ -389,7 +389,7 @@ blsp_spi3: spi@78b7000 { compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b7000 0x600>; + reg = <0x078b7000 0x500>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; @@ -406,7 +406,7 @@ blsp_spi4: spi@78b8000 { compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b8000 0x600>; + reg = <0x078b8000 0x500>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; @@ -423,7 +423,7 @@ blsp_spi5: spi@78b9000 { compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b9000 0x600>; + reg = <0x078b9000 0x500>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; @@ -440,7 +440,7 @@ blsp_spi6: spi@78ba000 { compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078ba000 0x600>; + reg = <0x078ba000 0x500>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; @@ -457,10 +457,10 @@ blsp_i2c2: i2c@78b6000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b6000 0x1000>; + reg = <0x078b6000 0x500>; interrupts = <GIC_SPI 96 0>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; clock-names = "iface", "core"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c2_default>; @@ -472,10 +472,10 @@ blsp_i2c4: i2c@78b8000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b8000 0x1000>; + reg = <0x078b8000 0x500>; interrupts = <GIC_SPI 98 0>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; + <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; clock-names = "iface", "core"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_default>; @@ -487,10 +487,10 @@ blsp_i2c6: i2c@78ba000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78ba000 0x1000>; + reg = <0x078ba000 0x500>; interrupts = <GIC_SPI 100 0>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; + <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; clock-names = "iface", "core"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c6_default>; @@ -906,6 +906,7 @@ "dsi_phy_regulator"; #clock-cells = <1>; + #phy-cells = <0>; clocks = <&gcc GCC_MDSS_AHB_CLK>; clock-names = "iface_clk"; @@ -1435,8 +1436,8 @@ #address-cells = <1>; #size-cells = <0>; - qcom,ipc-1 = <&apcs 0 13>; - qcom,ipc-6 = <&apcs 0 19>; + qcom,ipc-1 = <&apcs 8 13>; + qcom,ipc-3 = <&apcs 8 19>; apps_smsm: apps@0 { reg = <0>; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 0223e60d8b6a..196b1c0ceb9b 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -97,47 +97,45 @@ #address-cells = <1>; #size-cells = <0>; - wcd_codec: codec@f000 { - compatible = "qcom,pm8916-wcd-analog-codec"; - reg = <0xf000 0x200>; - reg-names = "pmic-codec-core"; - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; - interrupt-parent = <&spmi_bus>; - interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, - <0x1 0xf0 0x1 IRQ_TYPE_NONE>, - <0x1 0xf0 0x2 IRQ_TYPE_NONE>, - <0x1 0xf0 0x3 IRQ_TYPE_NONE>, - <0x1 0xf0 0x4 IRQ_TYPE_NONE>, - <0x1 0xf0 0x5 IRQ_TYPE_NONE>, - <0x1 0xf0 0x6 IRQ_TYPE_NONE>, - <0x1 0xf0 0x7 IRQ_TYPE_NONE>, - <0x1 0xf1 0x0 IRQ_TYPE_NONE>, - <0x1 0xf1 0x1 IRQ_TYPE_NONE>, - <0x1 0xf1 0x2 IRQ_TYPE_NONE>, - <0x1 0xf1 0x3 IRQ_TYPE_NONE>, - <0x1 0xf1 0x4 IRQ_TYPE_NONE>, - <0x1 0xf1 0x5 IRQ_TYPE_NONE>; - interrupt-names = "cdc_spk_cnp_int", - "cdc_spk_clip_int", - "cdc_spk_ocp_int", - "mbhc_ins_rem_det1", - "mbhc_but_rel_det", - "mbhc_but_press_det", - "mbhc_ins_rem_det", - "mbhc_switch_int", - "cdc_ear_ocp_int", - "cdc_hphr_ocp_int", - "cdc_hphl_ocp_det", - "cdc_ear_cnp_int", - "cdc_hphr_cnp_int", - "cdc_hphl_cnp_int"; - vdd-cdc-io-supply = <&pm8916_l5>; - vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; - vdd-micbias-supply = <&pm8916_l13>; - #sound-dai-cells = <1>; - - }; - + wcd_codec: codec@f000 { + compatible = "qcom,pm8916-wcd-analog-codec"; + reg = <0xf000 0x200>; + reg-names = "pmic-codec-core"; + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; + interrupt-parent = <&spmi_bus>; + interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, + <0x1 0xf0 0x1 IRQ_TYPE_NONE>, + <0x1 0xf0 0x2 IRQ_TYPE_NONE>, + <0x1 0xf0 0x3 IRQ_TYPE_NONE>, + <0x1 0xf0 0x4 IRQ_TYPE_NONE>, + <0x1 0xf0 0x5 IRQ_TYPE_NONE>, + <0x1 0xf0 0x6 IRQ_TYPE_NONE>, + <0x1 0xf0 0x7 IRQ_TYPE_NONE>, + <0x1 0xf1 0x0 IRQ_TYPE_NONE>, + <0x1 0xf1 0x1 IRQ_TYPE_NONE>, + <0x1 0xf1 0x2 IRQ_TYPE_NONE>, + <0x1 0xf1 0x3 IRQ_TYPE_NONE>, + <0x1 0xf1 0x4 IRQ_TYPE_NONE>, + <0x1 0xf1 0x5 IRQ_TYPE_NONE>; + interrupt-names = "cdc_spk_cnp_int", + "cdc_spk_clip_int", + "cdc_spk_ocp_int", + "mbhc_ins_rem_det1", + "mbhc_but_rel_det", + "mbhc_but_press_det", + "mbhc_ins_rem_det", + "mbhc_switch_int", + "cdc_ear_ocp_int", + "cdc_hphr_ocp_int", + "cdc_hphl_ocp_det", + "cdc_ear_cnp_int", + "cdc_hphr_cnp_int", + "cdc_hphl_cnp_int"; + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; + #sound-dai-cells = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 646198d82903..2186d0193b73 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -6,5 +6,6 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb -dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb +dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts index 3f7d5f51e428..7f2a3d923f21 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for the Salvator-X board + * Device Tree Source for the Salvator-X board with R-Car H3 ES1.x * * Copyright (C) 2015 Renesas Electronics Corp. * diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index 655dd30639c5..26769a11a190 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -21,6 +21,26 @@ status = "disabled"; }; + /delete-node/ mmu@febe0000; + /delete-node/ mmu@fe980000; + /delete-node/ mmu@fd960000; + /delete-node/ mmu@fd970000; + + ipmmu_mp1: mmu@ec680000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xec680000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 5>; + #iommu-cells = <1>; + }; + + ipmmu_sy: mmu@e7730000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xe7730000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 8>; + #iommu-cells = <1>; + status = "disabled"; + }; + /delete-node/ usb-phy@ee0e0200; /delete-node/ usb@ee0e0100; /delete-node/ usb@ee0e0000; @@ -35,6 +55,7 @@ clocks = <&cpg CPG_MOD 613>; power-domains = <&sysc R8A7795_PD_A3VP>; resets = <&cpg 613>; + iommus = <&ipmmu_vp0 2>; }; vspi2: vsp@fe9c0000 { @@ -54,6 +75,7 @@ clocks = <&cpg CPG_MOD 609>; power-domains = <&sysc R8A7795_PD_A3VP>; resets = <&cpg 609>; + iommus = <&ipmmu_vp0 10>; }; vspd3: vsp@fea38000 { @@ -73,6 +95,7 @@ clocks = <&cpg CPG_MOD 600>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 600>; + iommus = <&ipmmu_vi0 11>; }; fdp1@fe948000 { @@ -86,6 +109,68 @@ }; }; +&gpio1 { + gpio-ranges = <&pfc 0 32 28>; +}; + +&ipmmu_vi0 { + renesas,ipmmu-main = <&ipmmu_mm 11>; +}; + +&ipmmu_vp0 { + renesas,ipmmu-main = <&ipmmu_mm 12>; +}; + +&ipmmu_vc0 { + renesas,ipmmu-main = <&ipmmu_mm 9>; +}; + +&ipmmu_vc1 { + renesas,ipmmu-main = <&ipmmu_mm 10>; +}; + +&ipmmu_rt { + renesas,ipmmu-main = <&ipmmu_mm 7>; +}; + +&audma0 { + iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>, + <&ipmmu_mp1 2>, <&ipmmu_mp1 3>, + <&ipmmu_mp1 4>, <&ipmmu_mp1 5>, + <&ipmmu_mp1 6>, <&ipmmu_mp1 7>, + <&ipmmu_mp1 8>, <&ipmmu_mp1 9>, + <&ipmmu_mp1 10>, <&ipmmu_mp1 11>, + <&ipmmu_mp1 12>, <&ipmmu_mp1 13>, + <&ipmmu_mp1 14>, <&ipmmu_mp1 15>; +}; + +&audma1 { + iommus = <&ipmmu_mp1 16>, <&ipmmu_mp1 17>, + <&ipmmu_mp1 18>, <&ipmmu_mp1 19>, + <&ipmmu_mp1 20>, <&ipmmu_mp1 21>, + <&ipmmu_mp1 22>, <&ipmmu_mp1 23>, + <&ipmmu_mp1 24>, <&ipmmu_mp1 25>, + <&ipmmu_mp1 26>, <&ipmmu_mp1 27>, + <&ipmmu_mp1 28>, <&ipmmu_mp1 29>, + <&ipmmu_mp1 30>, <&ipmmu_mp1 31>; +}; + +&fcpvb1 { + iommus = <&ipmmu_vp0 7>; +}; + +&fcpf1 { + iommus = <&ipmmu_vp0 1>; +}; + +&fcpvi1 { + iommus = <&ipmmu_vp0 9>; +}; + +&fcpvd2 { + iommus = <&ipmmu_vi0 10>; +}; + &du { vsps = <&vspd0 &vspd1 &vspd2 &vspd3>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 17953070f38d..af467419266a 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for the Salvator-X board + * Device Tree Source for the Salvator-X board with R-Car H3 ES2.0 * * Copyright (C) 2015 Renesas Electronics Corp. * diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts index 7675de5d4f2c..8b50ceb746e8 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for the Salvator-X 2nd version board + * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0 * * Copyright (C) 2015-2017 Renesas Electronics Corp. * diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 15ef292a8d9f..d12df6f2ff09 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -30,11 +30,6 @@ i2c7 = &i2c_dvfs; }; - psci { - compatible = "arm,psci-1.0", "arm,psci-0.2"; - method = "smc"; - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -184,6 +179,35 @@ clock-frequency = <0>; }; + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, + <&a57_1>, + <&a57_2>, + <&a57_3>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, + <&a53_1>, + <&a53_2>, + <&a53_3>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + soc: soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -240,7 +264,7 @@ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; - gpio-ranges = <&pfc 0 32 28>; + gpio-ranges = <&pfc 0 32 29>; #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 911>; @@ -338,42 +362,6 @@ resets = <&cpg 905>; }; - pmu_a57 { - compatible = "arm,cortex-a57-pmu"; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&a57_0>, - <&a57_1>, - <&a57_2>, - <&a57_3>; - }; - - pmu_a53 { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&a53_0>, - <&a53_1>, - <&a53_2>, - <&a53_3>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; - }; - cpg: clock-controller@e6150000 { compatible = "renesas,r8a7795-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -421,6 +409,146 @@ resets = <&cpg 407>; }; + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi1: mmu@febe0000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfebe0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 15>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_vp0: mmu@fe990000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfe990000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A7795_PD_A3VP>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_vp1: mmu@fe980000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfe980000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 17>; + power-domains = <&sysc R8A7795_PD_A3VP>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A7795_PD_A3VC>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_vc1: mmu@fe6f0000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfe6f0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 13>; + power-domains = <&sysc R8A7795_PD_A3VC>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_pv2: mmu@fd960000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfd960000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 8>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_pv3: mmu@fd970000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfd970000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 9>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ir: mmu@ff8b0000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xff8b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A7795_PD_A3IR>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mp0: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7795", "renesas,rcar-dmac"; @@ -453,6 +581,14 @@ resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; }; dmac1: dma-controller@e7300000 { @@ -487,6 +623,14 @@ resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; }; dmac2: dma-controller@e7310000 { @@ -521,6 +665,14 @@ resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; }; audma0: dma-controller@ec700000 { @@ -555,6 +707,14 @@ resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_mp0 0>, <&ipmmu_mp0 1>, + <&ipmmu_mp0 2>, <&ipmmu_mp0 3>, + <&ipmmu_mp0 4>, <&ipmmu_mp0 5>, + <&ipmmu_mp0 6>, <&ipmmu_mp0 7>, + <&ipmmu_mp0 8>, <&ipmmu_mp0 9>, + <&ipmmu_mp0 10>, <&ipmmu_mp0 11>, + <&ipmmu_mp0 12>, <&ipmmu_mp0 13>, + <&ipmmu_mp0 14>, <&ipmmu_mp0 15>; }; audma1: dma-controller@ec720000 { @@ -589,6 +749,14 @@ resets = <&cpg 501>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_mp0 16>, <&ipmmu_mp0 17>, + <&ipmmu_mp0 18>, <&ipmmu_mp0 19>, + <&ipmmu_mp0 20>, <&ipmmu_mp0 21>, + <&ipmmu_mp0 22>, <&ipmmu_mp0 23>, + <&ipmmu_mp0 24>, <&ipmmu_mp0 25>, + <&ipmmu_mp0 26>, <&ipmmu_mp0 27>, + <&ipmmu_mp0 28>, <&ipmmu_mp0 29>, + <&ipmmu_mp0 30>, <&ipmmu_mp0 31>; }; avb: ethernet@e6800000 { @@ -631,6 +799,7 @@ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii-txid"; + iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1459,6 +1628,20 @@ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 815>; status = "disabled"; + iommus = <&ipmmu_hc 2>; + }; + + usb3_phy0: usb-phy@e65ee000 { + compatible = "renesas,r8a7795-usb3-phy", + "renesas,rcar-gen3-usb3-phy"; + reg = <0 0xe65ee000 0 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, + <&usb_extal_clk>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 328>; + #phy-cells = <0>; + status = "disabled"; }; xhci0: usb@ee000000 { @@ -1539,7 +1722,8 @@ }; sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7795"; + compatible = "renesas,sdhi-r8a7795", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 314>; @@ -1550,7 +1734,8 @@ }; sdhi1: sd@ee120000 { - compatible = "renesas,sdhi-r8a7795"; + compatible = "renesas,sdhi-r8a7795", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 313>; @@ -1561,7 +1746,8 @@ }; sdhi2: sd@ee140000 { - compatible = "renesas,sdhi-r8a7795"; + compatible = "renesas,sdhi-r8a7795", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 312>; @@ -1572,7 +1758,8 @@ }; sdhi3: sd@ee160000 { - compatible = "renesas,sdhi-r8a7795"; + compatible = "renesas,sdhi-r8a7795", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 311>; @@ -1873,6 +2060,7 @@ clocks = <&cpg CPG_MOD 606>; power-domains = <&sysc R8A7795_PD_A3VP>; resets = <&cpg 606>; + iommus = <&ipmmu_vp1 7>; }; fcpf0: fcp@fe950000 { @@ -1881,6 +2069,7 @@ clocks = <&cpg CPG_MOD 615>; power-domains = <&sysc R8A7795_PD_A3VP>; resets = <&cpg 615>; + iommus = <&ipmmu_vp0 0>; }; fcpf1: fcp@fe951000 { @@ -1889,6 +2078,7 @@ clocks = <&cpg CPG_MOD 614>; power-domains = <&sysc R8A7795_PD_A3VP>; resets = <&cpg 614>; + iommus = <&ipmmu_vp1 1>; }; vspbd: vsp@fe960000 { @@ -1908,6 +2098,7 @@ clocks = <&cpg CPG_MOD 607>; power-domains = <&sysc R8A7795_PD_A3VP>; resets = <&cpg 607>; + iommus = <&ipmmu_vp0 5>; }; vspi0: vsp@fe9a0000 { @@ -1927,6 +2118,7 @@ clocks = <&cpg CPG_MOD 611>; power-domains = <&sysc R8A7795_PD_A3VP>; resets = <&cpg 611>; + iommus = <&ipmmu_vp0 8>; }; vspi1: vsp@fe9b0000 { @@ -1946,6 +2138,7 @@ clocks = <&cpg CPG_MOD 610>; power-domains = <&sysc R8A7795_PD_A3VP>; resets = <&cpg 610>; + iommus = <&ipmmu_vp1 9>; }; vspd0: vsp@fea20000 { @@ -1965,6 +2158,7 @@ clocks = <&cpg CPG_MOD 603>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; }; vspd1: vsp@fea28000 { @@ -1984,6 +2178,7 @@ clocks = <&cpg CPG_MOD 602>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; }; vspd2: vsp@fea30000 { @@ -2003,6 +2198,7 @@ clocks = <&cpg CPG_MOD 601>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 601>; + iommus = <&ipmmu_vi1 10>; }; fdp1@fe940000 { @@ -2136,49 +2332,78 @@ #thermal-sensor-cells = <1>; status = "okay"; }; + }; - thermal-zones { - sensor_thermal1: sensor-thermal1 { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsc 0>; + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>; + }; - trips { - sensor1_crit: sensor1-crit { - temperature = <120000>; - hysteresis = <2000>; - type = "critical"; - }; + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; }; }; + }; - sensor_thermal2: sensor-thermal2 { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsc 1>; + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; - trips { - sensor2_crit: sensor2-crit { - temperature = <120000>; - hysteresis = <2000>; - type = "critical"; - }; + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; }; }; + }; - sensor_thermal3: sensor-thermal3 { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsc 2>; + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; - trips { - sensor3_crit: sensor3-crit { - temperature = <120000>; - hysteresis = <2000>; - type = "critical"; - }; + trips { + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; }; }; }; }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index b317be03306e..498c9e807dc4 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for the Salvator-X board + * Device Tree Source for the Salvator-X board with R-Car M3-W * * Copyright (C) 2016 Renesas Electronics Corp. * diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts new file mode 100644 index 000000000000..2c37055efa94 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts @@ -0,0 +1,58 @@ +/* + * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-W + * + * Copyright (C) 2015-2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7796.dtsi" +#include "salvator-xs.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board based on r8a7796"; + compatible = "renesas,salvator-xs", "renesas,r8a7796"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x80000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 727>, + <&versaclock6 1>, + <&x21_clk>, + <&versaclock6 2>; + clock-names = "du.0", "du.1", "du.2", "lvds.0", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; + +&hdmi0 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + }; +}; + +&hdmi0_con { + remote-endpoint = <&rcar_dw_hdmi0_out>; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index f2b2e40c655e..c5192d513d7d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -30,9 +30,34 @@ i2c7 = &i2c_dvfs; }; - psci { - compatible = "arm,psci-1.0", "arm,psci-0.2"; - method = "smc"; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; }; cpus { @@ -122,34 +147,32 @@ clock-frequency = <0>; }; - /* - * The external audio clocks are configured as 0 Hz fixed frequency - * clocks by default. - * Boards that provide audio clocks should override them. - */ - audio_clk_a: audio_clk_a { + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; - audio_clk_b: audio_clk_b { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, <&a57_1>; }; - audio_clk_c: audio_clk_c { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; }; - /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; }; /* External SCIF clock - to be overridden by boards that provide it */ @@ -159,13 +182,6 @@ clock-frequency = <0>; }; - /* External PCIe clock - can be overridden by the board */ - pcie_bus_clk: pcie_bus { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -190,18 +206,6 @@ resets = <&cpg 408>; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; - }; - wdt0: watchdog@e6020000 { compatible = "renesas,r8a7796-wdt", "renesas,rcar-gen3-wdt"; @@ -337,24 +341,98 @@ reg = <0 0xe6060000 0 0x50c>; }; - pmu_a57 { - compatible = "arm,cortex-a57-pmu"; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&a57_0>, - <&a57_1>; + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 9>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 8>; + power-domains = <&sysc R8A7796_PD_A3VC>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 5>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv1: mmu@fd950000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xfd950000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ir: mmu@ff8b0000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xff8b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A7796_PD_A3IR>; + #iommu-cells = <1>; + status = "disabled"; }; - pmu_a53 { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&a53_0>, - <&a53_1>, - <&a53_2>, - <&a53_3>; + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 7>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #iommu-cells = <1>; }; cpg: clock-controller@e6150000 { @@ -817,6 +895,7 @@ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii-txid"; + iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1101,6 +1180,14 @@ resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; }; dmac1: dma-controller@e7300000 { @@ -1135,6 +1222,14 @@ resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; }; dmac2: dma-controller@e7310000 { @@ -1169,6 +1264,14 @@ resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; }; audma0: dma-controller@ec700000 { @@ -1203,6 +1306,14 @@ resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>, + <&ipmmu_mp 2>, <&ipmmu_mp 3>, + <&ipmmu_mp 4>, <&ipmmu_mp 5>, + <&ipmmu_mp 6>, <&ipmmu_mp 7>, + <&ipmmu_mp 8>, <&ipmmu_mp 9>, + <&ipmmu_mp 10>, <&ipmmu_mp 11>, + <&ipmmu_mp 12>, <&ipmmu_mp 13>, + <&ipmmu_mp 14>, <&ipmmu_mp 15>; }; audma1: dma-controller@ec720000 { @@ -1237,6 +1348,14 @@ resets = <&cpg 501>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>, + <&ipmmu_mp 18>, <&ipmmu_mp 19>, + <&ipmmu_mp 20>, <&ipmmu_mp 21>, + <&ipmmu_mp 22>, <&ipmmu_mp 23>, + <&ipmmu_mp 24>, <&ipmmu_mp 25>, + <&ipmmu_mp 26>, <&ipmmu_mp 27>, + <&ipmmu_mp 28>, <&ipmmu_mp 29>, + <&ipmmu_mp 30>, <&ipmmu_mp 31>; }; usb_dmac0: dma-controller@e65a0000 { @@ -1284,6 +1403,19 @@ status = "disabled"; }; + usb3_phy0: usb-phy@e65ee000 { + compatible = "renesas,r8a7796-usb3-phy", + "renesas,rcar-gen3-usb3-phy"; + reg = <0 0xe65ee000 0 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, + <&usb_extal_clk>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 328>; + #phy-cells = <0>; + status = "disabled"; + }; + xhci0: usb@ee000000 { compatible = "renesas,xhci-r8a7796", "renesas,rcar-gen3-xhci"; @@ -1380,7 +1512,8 @@ }; sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7796"; + compatible = "renesas,sdhi-r8a7796", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 314>; @@ -1391,7 +1524,8 @@ }; sdhi1: sd@ee120000 { - compatible = "renesas,sdhi-r8a7796"; + compatible = "renesas,sdhi-r8a7796", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 313>; @@ -1402,7 +1536,8 @@ }; sdhi2: sd@ee140000 { - compatible = "renesas,sdhi-r8a7796"; + compatible = "renesas,sdhi-r8a7796", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 312>; @@ -1413,7 +1548,8 @@ }; sdhi3: sd@ee160000 { - compatible = "renesas,sdhi-r8a7796"; + compatible = "renesas,sdhi-r8a7796", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 311>; @@ -1438,50 +1574,6 @@ status = "okay"; }; - thermal-zones { - sensor_thermal1: sensor-thermal1 { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsc 0>; - - trips { - sensor1_crit: sensor1-crit { - temperature = <120000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - sensor_thermal2: sensor-thermal2 { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsc 1>; - - trips { - sensor2_crit: sensor2-crit { - temperature = <120000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - sensor_thermal3: sensor-thermal3 { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsc 2>; - - trips { - sensor3_crit: sensor3-crit { - temperature = <120000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - }; - rcar_sound: sound@ec500000 { /* * #sound-dai-cells is required @@ -1679,10 +1771,12 @@ }; pciec0: pcie@fe000000 { + reg = <0 0xfe000000 0 0x80000>; /* placeholder */ }; pciec1: pcie@ee800000 { + reg = <0 0xee800000 0 0x80000>; /* placeholder */ }; @@ -1740,6 +1834,7 @@ clocks = <&cpg CPG_MOD 611>; power-domains = <&sysc R8A7796_PD_A3VC>; resets = <&cpg 611>; + iommus = <&ipmmu_vc0 19>; }; vspd0: vsp@fea20000 { @@ -1759,6 +1854,7 @@ clocks = <&cpg CPG_MOD 603>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; }; vspd1: vsp@fea28000 { @@ -1778,6 +1874,7 @@ clocks = <&cpg CPG_MOD 602>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; }; vspd2: vsp@fea30000 { @@ -1797,6 +1894,7 @@ clocks = <&cpg CPG_MOD 601>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 601>; + iommus = <&ipmmu_vi0 10>; }; hdmi0: hdmi@fead0000 { @@ -1884,4 +1982,69 @@ resets = <&cpg 822>; }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + }; + + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + + trips { + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index a711e77cc6a5..8fe5c193e049 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -33,6 +33,17 @@ }; }; +&avb { + renesas,no-ether-link; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + }; +}; + &extal_clk { clock-frequency = <16666666>; }; @@ -41,17 +52,11 @@ clock-frequency = <32768>; }; -&scif0 { +&rwdt { + timeout-sec = <60>; status = "okay"; }; -&avb { - renesas,no-ether-link; - phy-handle = <&phy0>; +&scif0 { status = "okay"; - - phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; - reg = <0>; - }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts new file mode 100644 index 000000000000..8624ca87d6b2 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -0,0 +1,55 @@ +/* + * Device Tree Source for the V3M Starter Kit board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * Copyright (C) 2017 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a77970.dtsi" + +/ { + model = "Renesas V3M Starter Kit board"; + compatible = "renesas,v3msk", "renesas,r8a77970"; + + aliases { + serial0 = &scif0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; +}; + +&avb { + renesas,no-ether-link; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&scif0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 97e6981938e7..c35a117fc447 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -9,9 +9,10 @@ * kind, whether express or implied. */ -#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/r8a77970-cpg-mssr.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/clock/renesas-cpg-mssr.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/power/r8a77970-sysc.h> / { compatible = "renesas,r8a77970"; @@ -31,15 +32,15 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0>; - clocks = <&cpg CPG_CORE 0>; - power-domains = <&sysc 5>; + clocks = <&cpg CPG_CORE R8A77970_CLK_Z2>; + power-domains = <&sysc R8A77970_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; }; L2_CA53: cache-controller { compatible = "cache"; - power-domains = <&sysc 21>; + power-domains = <&sysc R8A77970_PD_CA53_SCU>; cache-unified; cache-level = <2>; }; @@ -87,7 +88,7 @@ IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 408>; }; @@ -103,6 +104,16 @@ IRQ_TYPE_LEVEL_LOW)>; }; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a77970-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77970-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -124,6 +135,49 @@ #power-domain-cells = <1>; }; + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a77970"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 9>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ir: mmu@ff8b0000 { + compatible = "renesas,ipmmu-r8a77970"; + reg = <0 0xff8b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A77970_PD_A3IR>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a77970"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 7>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a77970"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a77970"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + intc_ex: interrupt-controller@e61c0000 { compatible = "renesas,intc-ex-r8a77970", "renesas,irqc"; #interrupt-cells = <2>; @@ -136,7 +190,7 @@ GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 407>; }; @@ -163,10 +217,14 @@ "ch4", "ch5", "ch6", "ch7"; clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <8>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>; }; dmac2: dma-controller@e7310000 { @@ -187,10 +245,14 @@ "ch4", "ch5", "ch6", "ch7"; clocks = <&cpg CPG_MOD 217>; clock-names = "fck"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <8>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>; }; hscif0: serial@e6540000 { @@ -200,13 +262,13 @@ reg = <0 0xe6540000 0 96>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 520>, - <&cpg CPG_CORE 9>, + <&cpg CPG_CORE R8A77970_CLK_S2D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x31>, <&dmac1 0x30>, <&dmac2 0x31>, <&dmac2 0x30>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 520>; status = "disabled"; }; @@ -218,13 +280,13 @@ reg = <0 0xe6550000 0 96>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 519>, - <&cpg CPG_CORE 9>, + <&cpg CPG_CORE R8A77970_CLK_S2D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 519>; status = "disabled"; }; @@ -236,13 +298,13 @@ reg = <0 0xe6560000 0 96>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 518>, - <&cpg CPG_CORE 9>, + <&cpg CPG_CORE R8A77970_CLK_S2D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x35>, <&dmac1 0x34>, <&dmac2 0x35>, <&dmac2 0x34>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 518>; status = "disabled"; }; @@ -253,13 +315,13 @@ reg = <0 0xe66a0000 0 96>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 517>, - <&cpg CPG_CORE 9>, + <&cpg CPG_CORE R8A77970_CLK_S2D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x37>, <&dmac1 0x36>, <&dmac2 0x37>, <&dmac2 0x36>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 517>; status = "disabled"; }; @@ -271,13 +333,13 @@ reg = <0 0xe6e60000 0 64>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 207>, - <&cpg CPG_CORE 9>, + <&cpg CPG_CORE R8A77970_CLK_S2D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x51>, <&dmac1 0x50>, <&dmac2 0x51>, <&dmac2 0x50>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 207>; status = "disabled"; }; @@ -289,13 +351,13 @@ reg = <0 0xe6e68000 0 64>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 206>, - <&cpg CPG_CORE 9>, + <&cpg CPG_CORE R8A77970_CLK_S2D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x53>, <&dmac1 0x52>, <&dmac2 0x53>, <&dmac2 0x52>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 206>; status = "disabled"; }; @@ -307,13 +369,13 @@ reg = <0 0xe6c50000 0 64>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 204>, - <&cpg CPG_CORE 9>, + <&cpg CPG_CORE R8A77970_CLK_S2D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x57>, <&dmac1 0x56>, <&dmac2 0x57>, <&dmac2 0x56>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 204>; status = "disabled"; }; @@ -324,13 +386,13 @@ reg = <0 0xe6c40000 0 64>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 203>, - <&cpg CPG_CORE 9>, + <&cpg CPG_CORE R8A77970_CLK_S2D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x59>, <&dmac1 0x58>, <&dmac2 0x59>, <&dmac2 0x58>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 203>; status = "disabled"; }; @@ -372,9 +434,10 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii-id"; + iommus = <&ipmmu_rt 3>; #address-cells = <1>; #size-cells = <0>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index 788e3afae6e3..cff42cd1a6c8 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -51,6 +51,13 @@ clock-frequency = <0>; }; + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + scif_clk: scif { compatible = "fixed-clock"; #clock-cells = <0>; @@ -108,6 +115,88 @@ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; }; + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_vp0: mmu@fe990000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xfe990000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 16>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77995-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -155,6 +244,78 @@ resets = <&cpg 407>; }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a77995", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <8>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a77995", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <8>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a77995", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <8>; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a77995", "renesas,rcar-gen3-gpio", @@ -267,6 +428,63 @@ resets = <&cpg 906>; }; + can0: can@e6c30000 { + compatible = "renesas,can-r8a77995", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c30000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A77995_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A77995_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6c38000 { + compatible = "renesas,can-r8a77995", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c38000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A77995_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A77995_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + + canfd: can@e66c0000 { + compatible = "renesas,r8a77995-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A77995_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A77995_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + }; + avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77995", "renesas,etheravb-rcar-gen3"; @@ -307,6 +525,7 @@ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii-txid"; + iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -321,6 +540,9 @@ <&cpg CPG_CORE R8A77995_CLK_S3D1C>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; @@ -366,6 +588,18 @@ status = "disabled"; }; + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a77995", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + max-frequency = <200000000>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + ehci0: usb@ee080100 { compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index dbe2648649db..c3fafb6025b3 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -263,6 +263,7 @@ reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; }; }; @@ -354,6 +355,30 @@ &i2c_dvfs { status = "okay"; + + pmic: pmic@30 { + pinctrl-0 = <&irq0_pins>; + pinctrl-names = "default"; + + compatible = "rohm,bd9571mwv"; + reg = <0x30>; + interrupt-parent = <&intc_ex>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + regulators { + dvfs: dvfs { + regulator-name = "dvfs"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1030000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &ohci0 { @@ -409,6 +434,11 @@ function = "i2c2"; }; + irq0_pins: irq0 { + groups = "intc_ex_irq0"; + function = "intc_ex"; + }; + pwm1_pins: pwm1 { groups = "pwm1_a"; function = "pwm1"; @@ -595,6 +625,7 @@ bus-width = <8>; mmc-hs200-1_8v; non-removable; + fixed-emmc-driver-type = <1>; status = "okay"; }; @@ -616,6 +647,10 @@ shared-pin; }; +&usb_extal_clk { + clock-frequency = <50000000>; +}; + &usb2_phy0 { pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; @@ -631,6 +666,21 @@ status = "okay"; }; +&usb3_peri0 { + phys = <&usb3_phy0>; + phy-names = "usb"; + + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3s0_clk { + clock-frequency = <100000000>; +}; + &wdt0 { timeout-sec = <60>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index 657ad1041965..a4e715cbde87 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -29,6 +29,7 @@ }; &ehci0 { + dr_mode = "otg"; status = "okay"; }; @@ -41,6 +42,7 @@ }; &hsusb { + dr_mode = "otg"; status = "okay"; }; @@ -67,6 +69,20 @@ output-high; line-name = "HUB rst"; }; + + otg_offvbusn { + gpio-hog; + gpios = <8 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "OTG OFFVBUSn"; + }; + + otg_extlpn { + gpio-hog; + gpios = <9 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "OTG EXTLPn"; + }; }; gpio_exp_75: gpio@75 { @@ -119,6 +135,7 @@ }; &ohci0 { + dr_mode = "otg"; status = "okay"; }; @@ -154,6 +171,11 @@ groups = "scif1_data_b", "scif1_ctrl"; function = "scif1"; }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; }; &scif1 { @@ -164,6 +186,13 @@ status = "okay"; }; +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &xhci0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 73439cf48659..3e7a6b94e9f8 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -153,6 +153,7 @@ reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 2426da631938..a037ee56fead 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -531,6 +531,31 @@ status = "disabled"; }; + efuse: efuse@ff260000 { + compatible = "rockchip,rk3328-efuse"; + reg = <0x0 0xff260000 0x0 0x50>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cru SCLK_EFUSE>; + clock-names = "pclk_efuse"; + rockchip,efuse-size = <0x20>; + + /* Data cells */ + efuse_id: id@7 { + reg = <0x07 0x10>; + }; + cpu_leakage: cpu-leakage@17 { + reg = <0x17 0x1>; + }; + logic_leakage: logic-leakage@19 { + reg = <0x19 0x1>; + }; + efuse_cpu_version: cpu-version@1a { + reg = <0x1a 0x1>; + bits = <3 3>; + }; + }; + saradc: adc@ff280000 { compatible = "rockchip,rk3328-saradc", "rockchip,rk3399-saradc"; reg = <0x0 0xff280000 0x0 0x100>; @@ -543,6 +568,28 @@ status = "disabled"; }; + gpu: gpu@ff300000 { + compatible = "rockchip,rk3328-mali", "arm,mali-450"; + reg = <0x0 0xff300000 0x0 0x40000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1"; + clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>; + clock-names = "bus", "core"; + resets = <&cru SRST_GPU_A>; + }; + h265e_mmu: iommu@ff330200 { compatible = "rockchip,iommu"; reg = <0x0 0xff330200 0 0x100>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 0384e3121f18..191a6bcb1704 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -93,6 +93,18 @@ pwm-delay-us = <10000>; }; + edp_panel: edp-panel { + compatible = "sharp,lq123p1jx31", "simple-panel"; + backlight = <&backlight>; + power-supply = <&pp3300_disp>; + + ports { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; + thermistor_ppvar_bigcpu: thermistor-ppvar-bigcpu { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; @@ -268,6 +280,23 @@ ap_i2c_dig: &i2c2 { }; }; +&edp { + status = "okay"; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + edp_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + &ppvar_bigcpu_pwm { regulator-min-microvolt = <798674>; regulator-max-microvolt = <1302172>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 5772c52fbfd3..03f195025390 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -855,6 +855,20 @@ ap_i2c_audio: &i2c8 { compatible = "google,cros-ec-pwm"; #pwm-cells = <1>; }; + + usbc_extcon0: extcon@0 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <0>; + + #extcon-cells = <0>; + }; + + usbc_extcon1: extcon@1 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <1>; + + #extcon-cells = <0>; + }; }; }; @@ -865,6 +879,16 @@ ap_i2c_audio: &i2c8 { rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ }; +&tcphy0 { + status = "okay"; + extcon = <&usbc_extcon0>; +}; + +&tcphy1 { + status = "okay"; + extcon = <&usbc_extcon1>; +}; + &u2phy0 { status = "okay"; }; @@ -911,6 +935,7 @@ ap_i2c_audio: &i2c8 { &usbdrd3_0 { status = "okay"; + extcon = <&usbc_extcon0>; }; &usbdrd_dwc3_0 { @@ -920,6 +945,7 @@ ap_i2c_audio: &i2c8 { &usbdrd3_1 { status = "okay"; + extcon = <&usbc_extcon1>; }; &usbdrd_dwc3_1 { @@ -927,6 +953,22 @@ ap_i2c_audio: &i2c8 { dr_mode = "host"; }; +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + #include <arm/cros-ec-keyboard.dtsi> #include <arm/cros-ec-sbs.dtsi> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index d340b58ab184..7aa2144e0d47 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -397,9 +397,13 @@ #size-cells = <2>; ranges; clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>, - <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>; + <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>, + <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>; clock-names = "ref_clk", "suspend_clk", - "bus_clk", "grf_clk"; + "bus_clk", "aclk_usb3_rksoc_axi_perf", + "aclk_usb3", "grf_clk"; + resets = <&cru SRST_A_USB3_OTG0>; + reset-names = "usb3-otg"; status = "disabled"; usbdrd_dwc3_0: dwc3 { @@ -407,14 +411,15 @@ reg = <0x0 0xfe800000 0x0 0x100000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>; dr_mode = "otg"; - phys = <&u2phy0_otg>; - phy-names = "usb2-phy"; + phys = <&u2phy0_otg>, <&tcphy0_usb3>; + phy-names = "usb2-phy", "usb3-phy"; phy_type = "utmi_wide"; snps,dis_enblslpm_quirk; snps,dis-u2-freeclk-exists-quirk; snps,dis_u2_susphy_quirk; snps,dis-del-phy-power-chg-quirk; snps,dis-tx-ipgap-linecheck-quirk; + power-domains = <&power RK3399_PD_USB3>; status = "disabled"; }; }; @@ -425,9 +430,13 @@ #size-cells = <2>; ranges; clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>, - <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>; + <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>, + <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>; clock-names = "ref_clk", "suspend_clk", - "bus_clk", "grf_clk"; + "bus_clk", "aclk_usb3_rksoc_axi_perf", + "aclk_usb3", "grf_clk"; + resets = <&cru SRST_A_USB3_OTG1>; + reset-names = "usb3-otg"; status = "disabled"; usbdrd_dwc3_1: dwc3 { @@ -435,14 +444,15 @@ reg = <0x0 0xfe900000 0x0 0x100000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; dr_mode = "otg"; - phys = <&u2phy1_otg>; - phy-names = "usb2-phy"; + phys = <&u2phy1_otg>, <&tcphy1_usb3>; + phy-names = "usb2-phy", "usb3-phy"; phy_type = "utmi_wide"; snps,dis_enblslpm_quirk; snps,dis-u2-freeclk-exists-quirk; snps,dis_u2_susphy_quirk; snps,dis-del-phy-power-chg-quirk; snps,dis-tx-ipgap-linecheck-quirk; + power-domains = <&power RK3399_PD_USB3>; status = "disabled"; }; }; @@ -991,6 +1001,12 @@ clocks = <&cru HCLK_SDIO>; pm_qos = <&qos_sdioaudio>; }; + pd_usb3@RK3399_PD_USB3 { + reg = <RK3399_PD_USB3>; + clocks = <&cru ACLK_USB3>; + pm_qos = <&qos_usb_otg0>, + <&qos_usb_otg1>; + }; pd_vio@RK3399_PD_VIO { reg = <RK3399_PD_VIO>; #address-cells = <1>; @@ -1526,6 +1542,11 @@ reg = <2>; remote-endpoint = <&hdmi_in_vopl>; }; + + vopl_out_mipi1: endpoint@3 { + reg = <3>; + remote-endpoint = <&mipi1_in_vopl>; + }; }; }; @@ -1573,6 +1594,11 @@ reg = <2>; remote-endpoint = <&hdmi_in_vopb>; }; + + vopb_out_mipi1: endpoint@3 { + reg = <3>; + remote-endpoint = <&mipi1_in_vopb>; + }; }; }; @@ -1648,11 +1674,17 @@ <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>; clock-names = "ref", "pclk", "phy_cfg", "grf"; power-domains = <&power RK3399_PD_VIO>; + resets = <&cru SRST_P_MIPI_DSI0>; + reset-names = "apb"; rockchip,grf = <&grf>; status = "disabled"; ports { - mipi_in: port { + #address-cells = <1>; + #size-cells = <0>; + + mipi_in: port@0 { + reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -1668,6 +1700,41 @@ }; }; + mipi_dsi1: mipi@ff968000 { + compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0x0 0xff968000 0x0 0x8000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI1>, + <&cru SCLK_DPHY_TX1RX1_CFG>, <&cru PCLK_VIO_GRF>; + clock-names = "ref", "pclk", "phy_cfg", "grf"; + power-domains = <&power RK3399_PD_VIO>; + resets = <&cru SRST_P_MIPI_DSI1>; + reset-names = "apb"; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi1_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + mipi1_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_mipi1>; + }; + + mipi1_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_mipi1>; + }; + }; + }; + }; + edp: edp@ff970000 { compatible = "rockchip,rk3399-edp"; reg = <0x0 0xff970000 0x0 0x8000>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts index 6bdefb26b329..54c53170699a 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts @@ -50,7 +50,7 @@ &gpio { xirq0 { gpio-hog; - gpios = <120 0>; + gpios = <UNIPHIER_GPIO_IRQ(0) 0>; input; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index 1c63d0ab8a58..cd7c2d0a1f64 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -8,6 +8,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/uniphier-gpio.h> /memreserve/ 0x80000000 0x02000000; @@ -100,7 +101,7 @@ emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>; }; timer { @@ -347,6 +348,7 @@ <&mio_clk 12>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>; + has-transaction-translator; }; usb1: usb@5a810100 { @@ -360,6 +362,7 @@ <&mio_clk 13>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>; + has-transaction-translator; }; usb2: usb@5a820100 { @@ -373,6 +376,7 @@ <&mio_clk 14>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>; + has-transaction-translator; }; mioctrl@5b3e0000 { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts index 254d6795c67e..693371033c90 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts @@ -50,7 +50,7 @@ &gpio { xirq0 { gpio-hog; - gpios = <120 0>; + gpios = <UNIPHIER_GPIO_IRQ(0) 0>; input; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 5c81070944cc..8a3276ba2da1 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -8,6 +8,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/uniphier-gpio.h> #include <dt-bindings/thermal/thermal.h> /memreserve/ 0x80000000 0x02000000; @@ -172,7 +173,7 @@ emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>; }; timer { diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts index f9f06fcfb94a..3c7108729827 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts @@ -45,6 +45,22 @@ status = "okay"; }; +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; + +&gpio { + xirq4 { + gpio-hog; + gpios = <UNIPHIER_GPIO_IRQ(4) 0>; + input; + }; +}; + &i2c0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index 0ac2ace82435..234fc58cc599 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -8,6 +8,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/uniphier-gpio.h> /memreserve/ 0x80000000 0x02000000; @@ -128,7 +129,7 @@ emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio 47 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(5, 7) GPIO_ACTIVE_LOW>; }; timer { diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi index 7b7d8cedacda..5dbfb796d9f9 100644 --- a/arch/arm64/boot/dts/sprd/sc9860.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi @@ -183,6 +183,120 @@ }; soc { + pmu_gate: pmu-gate { + compatible = "sprd,sc9860-pmu-gate"; + sprd,syscon = <&pmu_regs>; /* 0x402b0000 */ + clocks = <&ext_26m>; + #clock-cells = <1>; + }; + + pll: pll { + compatible = "sprd,sc9860-pll"; + sprd,syscon = <&ana_regs>; /* 0x40400000 */ + clocks = <&pmu_gate 0>; + #clock-cells = <1>; + }; + + ap_clk: clock-controller@20000000 { + compatible = "sprd,sc9860-ap-clk"; + reg = <0 0x20000000 0 0x400>; + clocks = <&ext_26m>, <&pll 0>, + <&pmu_gate 0>; + #clock-cells = <1>; + }; + + aon_prediv: aon-prediv { + compatible = "sprd,sc9860-aon-prediv"; + reg = <0 0x402d0000 0 0x400>; + clocks = <&ext_26m>, <&pll 0>, + <&pmu_gate 0>; + #clock-cells = <1>; + }; + + apahb_gate: apahb-gate { + compatible = "sprd,sc9860-apahb-gate"; + sprd,syscon = <&ap_ahb_regs>; /* 0x20210000 */ + clocks = <&aon_prediv 0>; + #clock-cells = <1>; + }; + + aon_gate: aon-gate { + compatible = "sprd,sc9860-aon-gate"; + sprd,syscon = <&aon_regs>; /* 0x402e0000 */ + clocks = <&aon_prediv 0>; + #clock-cells = <1>; + }; + + aonsecure_clk: clock-controller@40880000 { + compatible = "sprd,sc9860-aonsecure-clk"; + reg = <0 0x40880000 0 0x400>; + clocks = <&ext_26m>, <&pll 0>; + #clock-cells = <1>; + }; + + agcp_gate: agcp-gate { + compatible = "sprd,sc9860-agcp-gate"; + sprd,syscon = <&agcp_regs>; /* 0x415e0000 */ + clocks = <&aon_prediv 0>; + #clock-cells = <1>; + }; + + gpu_clk: clock-controller@60200000 { + compatible = "sprd,sc9860-gpu-clk"; + reg = <0 0x60200000 0 0x400>; + clocks = <&pll 0>; + #clock-cells = <1>; + }; + + vsp_clk: clock-controller@61000000 { + compatible = "sprd,sc9860-vsp-clk"; + reg = <0 0x61000000 0 0x400>; + clocks = <&ext_26m>, <&pll 0>; + #clock-cells = <1>; + }; + + vsp_gate: vsp-gate { + compatible = "sprd,sc9860-vsp-gate"; + sprd,syscon = <&vsp_regs>; /* 0x61100000 */ + clocks = <&vsp_clk 0>; + #clock-cells = <1>; + }; + + cam_clk: clock-controller@62000000 { + compatible = "sprd,sc9860-cam-clk"; + reg = <0 0x62000000 0 0x4000>; + clocks = <&ext_26m>, <&pll 0>; + #clock-cells = <1>; + }; + + cam_gate: cam-gate { + compatible = "sprd,sc9860-cam-gate"; + sprd,syscon = <&cam_regs>; /* 0x62100000 */ + clocks = <&cam_clk 0>; + #clock-cells = <1>; + }; + + disp_clk: clock-controller@63000000 { + compatible = "sprd,sc9860-disp-clk"; + reg = <0 0x63000000 0 0x400>; + clocks = <&ext_26m>, <&pll 0>; + #clock-cells = <1>; + }; + + disp_gate: disp-gate { + compatible = "sprd,sc9860-disp-gate"; + sprd,syscon = <&disp_regs>; /* 0x63100000 */ + clocks = <&disp_clk 0>; + #clock-cells = <1>; + }; + + apapb_gate: apapb-gate { + compatible = "sprd,sc9860-apapb-gate"; + sprd,syscon = <&ap_apb_regs>; /* 0x70b00000 */ + clocks = <&ap_clk 0>; + #clock-cells = <1>; + }; + funnel@10001000 { /* SoC Funnel */ compatible = "arm,coresight-funnel", "arm,primecell"; reg = <0 0x10001000 0 0x1000>; diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi index 7c217c547f85..328009c4638c 100644 --- a/arch/arm64/boot/dts/sprd/whale2.dtsi +++ b/arch/arm64/boot/dts/sprd/whale2.dtsi @@ -17,6 +17,51 @@ #size-cells = <2>; ranges; + ap_ahb_regs: syscon@20210000 { + compatible = "syscon"; + reg = <0 0x20210000 0 0x10000>; + }; + + pmu_regs: syscon@402b0000 { + compatible = "syscon"; + reg = <0 0x402b0000 0 0x10000>; + }; + + aon_regs: syscon@402e0000 { + compatible = "syscon"; + reg = <0 0x402e0000 0 0x10000>; + }; + + ana_regs: syscon@40400000 { + compatible = "syscon"; + reg = <0 0x40400000 0 0x10000>; + }; + + agcp_regs: syscon@415e0000 { + compatible = "syscon"; + reg = <0 0x415e0000 0 0x1000000>; + }; + + vsp_regs: syscon@61100000 { + compatible = "syscon"; + reg = <0 0x61100000 0 0x10000>; + }; + + cam_regs: syscon@62100000 { + compatible = "syscon"; + reg = <0 0x62100000 0 0x10000>; + }; + + disp_regs: syscon@63100000 { + compatible = "syscon"; + reg = <0 0x63100000 0 0x10000>; + }; + + ap_apb_regs: syscon@70b00000 { + compatible = "syscon"; + reg = <0 0x70b00000 0 0x40000>; + }; + ap-apb { compatible = "simple-bus"; #address-cells = <1>; @@ -59,13 +104,26 @@ status = "disabled"; }; }; + }; + ext_32k: ext_32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ext-32k"; }; - ext_26m: ext-26m { + ext_26m: ext_26m { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; - clock-output-names = "ext_26m"; + clock-output-names = "ext-26m"; + }; + + ext_rco_100m: ext_rco_100m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "ext-rco-100m"; }; }; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 6356c6da34ea..634b373785c4 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -86,6 +86,7 @@ CONFIG_SCHED_MC=y CONFIG_NUMA=y CONFIG_PREEMPT=y CONFIG_KSM=y +CONFIG_MEMORY_FAILURE=y CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_CMA=y CONFIG_SECCOMP=y @@ -99,6 +100,7 @@ CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y CONFIG_ARM_CPUIDLE=y CONFIG_CPU_FREQ=y CONFIG_CPUFREQ_DT=y +CONFIG_ARM_ARMADA_37XX_CPUFREQ=y CONFIG_ARM_BIG_LITTLE_CPUFREQ=y CONFIG_ARM_SCPI_CPUFREQ=y CONFIG_ACPI_CPPC_CPUFREQ=m @@ -161,7 +163,7 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_DENALI_DT=y -CONFIG_MTD_NAND_PXA3xx=y +CONFIG_MTD_NAND_MARVELL=y CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m @@ -421,7 +423,6 @@ CONFIG_USB_OTG=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_TEGRA=y CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_MSM=y CONFIG_USB_EHCI_EXYNOS=y CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_OHCI_HCD=y @@ -429,6 +430,8 @@ CONFIG_USB_OHCI_EXYNOS=y CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_RENESAS_USBHS=m CONFIG_USB_STORAGE=y +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SUNXI=y CONFIG_USB_DWC3=y CONFIG_USB_DWC2=y CONFIG_USB_CHIPIDEA=y @@ -438,8 +441,6 @@ CONFIG_USB_CHIPIDEA_ULPI=y CONFIG_USB_ISP1760=y CONFIG_USB_HSIC_USB3503=y CONFIG_NOP_USB_XCEIV=y -CONFIG_USB_MSM_OTG=y -CONFIG_USB_QCOM_8X16_PHY=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=m @@ -473,7 +474,10 @@ CONFIG_LEDS_SYSCON=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_CPU=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_LEDS_TRIGGER_PANIC=y +CONFIG_LEDS_TRIGGER_DISK=y CONFIG_EDAC=y +CONFIG_EDAC_GHES=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_RK808=m @@ -558,6 +562,7 @@ CONFIG_PHY_XGENE=y CONFIG_PHY_TEGRA_XUSB=y CONFIG_QCOM_L2_PMU=y CONFIG_QCOM_L3_PMU=y +CONFIG_UNIPHIER_EFUSE=y CONFIG_TEE=y CONFIG_OPTEE=y CONFIG_ARM_SCPI_PROTOCOL=y @@ -567,6 +572,8 @@ CONFIG_ACPI=y CONFIG_ACPI_APEI=y CONFIG_ACPI_APEI_GHES=y CONFIG_ACPI_APEI_PCIEAER=y +CONFIG_ACPI_APEI_MEMORY_FAILURE=y +CONFIG_ACPI_APEI_EINJ=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS_POSIX_ACL=y diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig index 70c517aa4501..285c36c7b408 100644 --- a/arch/arm64/crypto/Kconfig +++ b/arch/arm64/crypto/Kconfig @@ -29,6 +29,24 @@ config CRYPTO_SHA2_ARM64_CE select CRYPTO_HASH select CRYPTO_SHA256_ARM64 +config CRYPTO_SHA512_ARM64_CE + tristate "SHA-384/SHA-512 digest algorithm (ARMv8 Crypto Extensions)" + depends on KERNEL_MODE_NEON + select CRYPTO_HASH + select CRYPTO_SHA512_ARM64 + +config CRYPTO_SHA3_ARM64 + tristate "SHA3 digest algorithm (ARMv8.2 Crypto Extensions)" + depends on KERNEL_MODE_NEON + select CRYPTO_HASH + select CRYPTO_SHA3 + +config CRYPTO_SM3_ARM64_CE + tristate "SM3 digest algorithm (ARMv8.2 Crypto Extensions)" + depends on KERNEL_MODE_NEON + select CRYPTO_HASH + select CRYPTO_SM3 + config CRYPTO_GHASH_ARM64_CE tristate "GHASH/AES-GCM using ARMv8 Crypto Extensions" depends on KERNEL_MODE_NEON diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile index b5edc5918c28..cee9b8d9830b 100644 --- a/arch/arm64/crypto/Makefile +++ b/arch/arm64/crypto/Makefile @@ -14,6 +14,15 @@ sha1-ce-y := sha1-ce-glue.o sha1-ce-core.o obj-$(CONFIG_CRYPTO_SHA2_ARM64_CE) += sha2-ce.o sha2-ce-y := sha2-ce-glue.o sha2-ce-core.o +obj-$(CONFIG_CRYPTO_SHA512_ARM64_CE) += sha512-ce.o +sha512-ce-y := sha512-ce-glue.o sha512-ce-core.o + +obj-$(CONFIG_CRYPTO_SHA3_ARM64) += sha3-ce.o +sha3-ce-y := sha3-ce-glue.o sha3-ce-core.o + +obj-$(CONFIG_CRYPTO_SM3_ARM64_CE) += sm3-ce.o +sm3-ce-y := sm3-ce-glue.o sm3-ce-core.o + obj-$(CONFIG_CRYPTO_GHASH_ARM64_CE) += ghash-ce.o ghash-ce-y := ghash-ce-glue.o ghash-ce-core.o @@ -24,7 +33,7 @@ obj-$(CONFIG_CRYPTO_CRC32_ARM64_CE) += crc32-ce.o crc32-ce-y:= crc32-ce-core.o crc32-ce-glue.o obj-$(CONFIG_CRYPTO_AES_ARM64_CE) += aes-ce-cipher.o -CFLAGS_aes-ce-cipher.o += -march=armv8-a+crypto +aes-ce-cipher-y := aes-ce-core.o aes-ce-glue.o obj-$(CONFIG_CRYPTO_AES_ARM64_CE_CCM) += aes-ce-ccm.o aes-ce-ccm-y := aes-ce-ccm-glue.o aes-ce-ccm-core.o diff --git a/arch/arm64/crypto/aes-ce-core.S b/arch/arm64/crypto/aes-ce-core.S new file mode 100644 index 000000000000..8efdfdade393 --- /dev/null +++ b/arch/arm64/crypto/aes-ce-core.S @@ -0,0 +1,87 @@ +/* + * Copyright (C) 2013 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + + .arch armv8-a+crypto + +ENTRY(__aes_ce_encrypt) + sub w3, w3, #2 + ld1 {v0.16b}, [x2] + ld1 {v1.4s}, [x0], #16 + cmp w3, #10 + bmi 0f + bne 3f + mov v3.16b, v1.16b + b 2f +0: mov v2.16b, v1.16b + ld1 {v3.4s}, [x0], #16 +1: aese v0.16b, v2.16b + aesmc v0.16b, v0.16b +2: ld1 {v1.4s}, [x0], #16 + aese v0.16b, v3.16b + aesmc v0.16b, v0.16b +3: ld1 {v2.4s}, [x0], #16 + subs w3, w3, #3 + aese v0.16b, v1.16b + aesmc v0.16b, v0.16b + ld1 {v3.4s}, [x0], #16 + bpl 1b + aese v0.16b, v2.16b + eor v0.16b, v0.16b, v3.16b + st1 {v0.16b}, [x1] + ret +ENDPROC(__aes_ce_encrypt) + +ENTRY(__aes_ce_decrypt) + sub w3, w3, #2 + ld1 {v0.16b}, [x2] + ld1 {v1.4s}, [x0], #16 + cmp w3, #10 + bmi 0f + bne 3f + mov v3.16b, v1.16b + b 2f +0: mov v2.16b, v1.16b + ld1 {v3.4s}, [x0], #16 +1: aesd v0.16b, v2.16b + aesimc v0.16b, v0.16b +2: ld1 {v1.4s}, [x0], #16 + aesd v0.16b, v3.16b + aesimc v0.16b, v0.16b +3: ld1 {v2.4s}, [x0], #16 + subs w3, w3, #3 + aesd v0.16b, v1.16b + aesimc v0.16b, v0.16b + ld1 {v3.4s}, [x0], #16 + bpl 1b + aesd v0.16b, v2.16b + eor v0.16b, v0.16b, v3.16b + st1 {v0.16b}, [x1] + ret +ENDPROC(__aes_ce_decrypt) + +/* + * __aes_ce_sub() - use the aese instruction to perform the AES sbox + * substitution on each byte in 'input' + */ +ENTRY(__aes_ce_sub) + dup v1.4s, w0 + movi v0.16b, #0 + aese v0.16b, v1.16b + umov w0, v0.s[0] + ret +ENDPROC(__aes_ce_sub) + +ENTRY(__aes_ce_invert) + ld1 {v0.4s}, [x1] + aesimc v1.16b, v0.16b + st1 {v1.4s}, [x0] + ret +ENDPROC(__aes_ce_invert) diff --git a/arch/arm64/crypto/aes-ce-cipher.c b/arch/arm64/crypto/aes-ce-glue.c index 6a75cd75ed11..e6b3227bbf57 100644 --- a/arch/arm64/crypto/aes-ce-cipher.c +++ b/arch/arm64/crypto/aes-ce-glue.c @@ -29,6 +29,13 @@ struct aes_block { u8 b[AES_BLOCK_SIZE]; }; +asmlinkage void __aes_ce_encrypt(u32 *rk, u8 *out, const u8 *in, int rounds); +asmlinkage void __aes_ce_decrypt(u32 *rk, u8 *out, const u8 *in, int rounds); + +asmlinkage u32 __aes_ce_sub(u32 l); +asmlinkage void __aes_ce_invert(struct aes_block *out, + const struct aes_block *in); + static int num_rounds(struct crypto_aes_ctx *ctx) { /* @@ -44,10 +51,6 @@ static int num_rounds(struct crypto_aes_ctx *ctx) static void aes_cipher_encrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[]) { struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm); - struct aes_block *out = (struct aes_block *)dst; - struct aes_block const *in = (struct aes_block *)src; - void *dummy0; - int dummy1; if (!may_use_simd()) { __aes_arm64_encrypt(ctx->key_enc, dst, src, num_rounds(ctx)); @@ -55,49 +58,13 @@ static void aes_cipher_encrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[]) } kernel_neon_begin(); - - __asm__(" ld1 {v0.16b}, %[in] ;" - " ld1 {v1.4s}, [%[key]], #16 ;" - " cmp %w[rounds], #10 ;" - " bmi 0f ;" - " bne 3f ;" - " mov v3.16b, v1.16b ;" - " b 2f ;" - "0: mov v2.16b, v1.16b ;" - " ld1 {v3.4s}, [%[key]], #16 ;" - "1: aese v0.16b, v2.16b ;" - " aesmc v0.16b, v0.16b ;" - "2: ld1 {v1.4s}, [%[key]], #16 ;" - " aese v0.16b, v3.16b ;" - " aesmc v0.16b, v0.16b ;" - "3: ld1 {v2.4s}, [%[key]], #16 ;" - " subs %w[rounds], %w[rounds], #3 ;" - " aese v0.16b, v1.16b ;" - " aesmc v0.16b, v0.16b ;" - " ld1 {v3.4s}, [%[key]], #16 ;" - " bpl 1b ;" - " aese v0.16b, v2.16b ;" - " eor v0.16b, v0.16b, v3.16b ;" - " st1 {v0.16b}, %[out] ;" - - : [out] "=Q"(*out), - [key] "=r"(dummy0), - [rounds] "=r"(dummy1) - : [in] "Q"(*in), - "1"(ctx->key_enc), - "2"(num_rounds(ctx) - 2) - : "cc"); - + __aes_ce_encrypt(ctx->key_enc, dst, src, num_rounds(ctx)); kernel_neon_end(); } static void aes_cipher_decrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[]) { struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm); - struct aes_block *out = (struct aes_block *)dst; - struct aes_block const *in = (struct aes_block *)src; - void *dummy0; - int dummy1; if (!may_use_simd()) { __aes_arm64_decrypt(ctx->key_dec, dst, src, num_rounds(ctx)); @@ -105,62 +72,10 @@ static void aes_cipher_decrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[]) } kernel_neon_begin(); - - __asm__(" ld1 {v0.16b}, %[in] ;" - " ld1 {v1.4s}, [%[key]], #16 ;" - " cmp %w[rounds], #10 ;" - " bmi 0f ;" - " bne 3f ;" - " mov v3.16b, v1.16b ;" - " b 2f ;" - "0: mov v2.16b, v1.16b ;" - " ld1 {v3.4s}, [%[key]], #16 ;" - "1: aesd v0.16b, v2.16b ;" - " aesimc v0.16b, v0.16b ;" - "2: ld1 {v1.4s}, [%[key]], #16 ;" - " aesd v0.16b, v3.16b ;" - " aesimc v0.16b, v0.16b ;" - "3: ld1 {v2.4s}, [%[key]], #16 ;" - " subs %w[rounds], %w[rounds], #3 ;" - " aesd v0.16b, v1.16b ;" - " aesimc v0.16b, v0.16b ;" - " ld1 {v3.4s}, [%[key]], #16 ;" - " bpl 1b ;" - " aesd v0.16b, v2.16b ;" - " eor v0.16b, v0.16b, v3.16b ;" - " st1 {v0.16b}, %[out] ;" - - : [out] "=Q"(*out), - [key] "=r"(dummy0), - [rounds] "=r"(dummy1) - : [in] "Q"(*in), - "1"(ctx->key_dec), - "2"(num_rounds(ctx) - 2) - : "cc"); - + __aes_ce_decrypt(ctx->key_dec, dst, src, num_rounds(ctx)); kernel_neon_end(); } -/* - * aes_sub() - use the aese instruction to perform the AES sbox substitution - * on each byte in 'input' - */ -static u32 aes_sub(u32 input) -{ - u32 ret; - - __asm__("dup v1.4s, %w[in] ;" - "movi v0.16b, #0 ;" - "aese v0.16b, v1.16b ;" - "umov %w[out], v0.4s[0] ;" - - : [out] "=r"(ret) - : [in] "r"(input) - : "v0","v1"); - - return ret; -} - int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key, unsigned int key_len) { @@ -189,7 +104,7 @@ int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key, u32 *rki = ctx->key_enc + (i * kwords); u32 *rko = rki + kwords; - rko[0] = ror32(aes_sub(rki[kwords - 1]), 8) ^ rcon[i] ^ rki[0]; + rko[0] = ror32(__aes_ce_sub(rki[kwords - 1]), 8) ^ rcon[i] ^ rki[0]; rko[1] = rko[0] ^ rki[1]; rko[2] = rko[1] ^ rki[2]; rko[3] = rko[2] ^ rki[3]; @@ -202,7 +117,7 @@ int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key, } else if (key_len == AES_KEYSIZE_256) { if (i >= 6) break; - rko[4] = aes_sub(rko[3]) ^ rki[4]; + rko[4] = __aes_ce_sub(rko[3]) ^ rki[4]; rko[5] = rko[4] ^ rki[5]; rko[6] = rko[5] ^ rki[6]; rko[7] = rko[6] ^ rki[7]; @@ -221,13 +136,7 @@ int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key, key_dec[0] = key_enc[j]; for (i = 1, j--; j > 0; i++, j--) - __asm__("ld1 {v0.4s}, %[in] ;" - "aesimc v1.16b, v0.16b ;" - "st1 {v1.4s}, %[out] ;" - - : [out] "=Q"(key_dec[i]) - : [in] "Q"(key_enc[j]) - : "v0","v1"); + __aes_ce_invert(key_dec + i, key_enc + j); key_dec[i] = key_enc[0]; kernel_neon_end(); diff --git a/arch/arm64/crypto/aes-cipher-core.S b/arch/arm64/crypto/aes-cipher-core.S index 6d2445d603cc..3a44eada2347 100644 --- a/arch/arm64/crypto/aes-cipher-core.S +++ b/arch/arm64/crypto/aes-cipher-core.S @@ -125,6 +125,16 @@ CPU_BE( rev w7, w7 ) ret .endm +ENTRY(__aes_arm64_encrypt) + do_crypt fround, crypto_ft_tab, crypto_ft_tab + 1, 2 +ENDPROC(__aes_arm64_encrypt) + + .align 5 +ENTRY(__aes_arm64_decrypt) + do_crypt iround, crypto_it_tab, __aes_arm64_inverse_sbox, 0 +ENDPROC(__aes_arm64_decrypt) + + .section ".rodata", "a" .align L1_CACHE_SHIFT .type __aes_arm64_inverse_sbox, %object __aes_arm64_inverse_sbox: @@ -161,12 +171,3 @@ __aes_arm64_inverse_sbox: .byte 0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26 .byte 0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d .size __aes_arm64_inverse_sbox, . - __aes_arm64_inverse_sbox - -ENTRY(__aes_arm64_encrypt) - do_crypt fround, crypto_ft_tab, crypto_ft_tab + 1, 2 -ENDPROC(__aes_arm64_encrypt) - - .align 5 -ENTRY(__aes_arm64_decrypt) - do_crypt iround, crypto_it_tab, __aes_arm64_inverse_sbox, 0 -ENDPROC(__aes_arm64_decrypt) diff --git a/arch/arm64/crypto/aes-glue.c b/arch/arm64/crypto/aes-glue.c index 998ba519a026..2fa850e86aa8 100644 --- a/arch/arm64/crypto/aes-glue.c +++ b/arch/arm64/crypto/aes-glue.c @@ -665,6 +665,7 @@ static int __init aes_init(void) unregister_simds: aes_exit(); + return err; unregister_ciphers: crypto_unregister_skciphers(aes_algs, ARRAY_SIZE(aes_algs)); return err; diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S index f1e3aa2732f9..1c7b45b7268e 100644 --- a/arch/arm64/crypto/aes-neon.S +++ b/arch/arm64/crypto/aes-neon.S @@ -32,10 +32,10 @@ /* preload the entire Sbox */ .macro prepare, sbox, shiftrows, temp - adr \temp, \sbox movi v12.16b, #0x1b - ldr q13, \shiftrows - ldr q14, .Lror32by8 + ldr_l q13, \shiftrows, \temp + ldr_l q14, .Lror32by8, \temp + adr_l \temp, \sbox ld1 {v16.16b-v19.16b}, [\temp], #64 ld1 {v20.16b-v23.16b}, [\temp], #64 ld1 {v24.16b-v27.16b}, [\temp], #64 @@ -272,7 +272,7 @@ #include "aes-modes.S" - .text + .section ".rodata", "a" .align 6 .LForward_Sbox: .byte 0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5 diff --git a/arch/arm64/crypto/crc32-ce-core.S b/arch/arm64/crypto/crc32-ce-core.S index 18f5a8442276..16ed3c7ebd37 100644 --- a/arch/arm64/crypto/crc32-ce-core.S +++ b/arch/arm64/crypto/crc32-ce-core.S @@ -50,7 +50,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> - .text + .section ".rodata", "a" .align 6 .cpu generic+crypto+crc @@ -115,12 +115,13 @@ * uint crc32_pmull_le(unsigned char const *buffer, * size_t len, uint crc32) */ + .text ENTRY(crc32_pmull_le) - adr x3, .Lcrc32_constants + adr_l x3, .Lcrc32_constants b 0f ENTRY(crc32c_pmull_le) - adr x3, .Lcrc32c_constants + adr_l x3, .Lcrc32c_constants 0: bic LEN, LEN, #15 ld1 {v1.16b-v4.16b}, [BUF], #0x40 diff --git a/arch/arm64/crypto/crc32-ce-glue.c b/arch/arm64/crypto/crc32-ce-glue.c index 624f4137918c..34b4e3d46aab 100644 --- a/arch/arm64/crypto/crc32-ce-glue.c +++ b/arch/arm64/crypto/crc32-ce-glue.c @@ -185,6 +185,7 @@ static struct shash_alg crc32_pmull_algs[] = { { .base.cra_name = "crc32", .base.cra_driver_name = "crc32-arm64-ce", .base.cra_priority = 200, + .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, .base.cra_blocksize = 1, .base.cra_module = THIS_MODULE, }, { @@ -200,6 +201,7 @@ static struct shash_alg crc32_pmull_algs[] = { { .base.cra_name = "crc32c", .base.cra_driver_name = "crc32c-arm64-ce", .base.cra_priority = 200, + .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, .base.cra_blocksize = 1, .base.cra_module = THIS_MODULE, } }; diff --git a/arch/arm64/crypto/crct10dif-ce-core.S b/arch/arm64/crypto/crct10dif-ce-core.S index d5b5a8c038c8..f179c01bd55c 100644 --- a/arch/arm64/crypto/crct10dif-ce-core.S +++ b/arch/arm64/crypto/crct10dif-ce-core.S @@ -128,7 +128,7 @@ CPU_LE( ext v7.16b, v7.16b, v7.16b, #8 ) // XOR the initial_crc value eor v0.16b, v0.16b, v10.16b - ldr q10, rk3 // xmm10 has rk3 and rk4 + ldr_l q10, rk3, x8 // xmm10 has rk3 and rk4 // type of pmull instruction // will determine which constant to use @@ -184,13 +184,13 @@ CPU_LE( ext v12.16b, v12.16b, v12.16b, #8 ) // fold the 8 vector registers to 1 vector register with different // constants - ldr q10, rk9 + ldr_l q10, rk9, x8 .macro fold16, reg, rk pmull v8.1q, \reg\().1d, v10.1d pmull2 \reg\().1q, \reg\().2d, v10.2d .ifnb \rk - ldr q10, \rk + ldr_l q10, \rk, x8 .endif eor v7.16b, v7.16b, v8.16b eor v7.16b, v7.16b, \reg\().16b @@ -251,7 +251,7 @@ CPU_LE( ext v1.16b, v1.16b, v1.16b, #8 ) // get rid of the extra data that was loaded before // load the shift constant - adr x4, tbl_shf_table + 16 + adr_l x4, tbl_shf_table + 16 sub x4, x4, arg3 ld1 {v0.16b}, [x4] @@ -275,7 +275,7 @@ CPU_LE( ext v1.16b, v1.16b, v1.16b, #8 ) _128_done: // compute crc of a 128-bit value - ldr q10, rk5 // rk5 and rk6 in xmm10 + ldr_l q10, rk5, x8 // rk5 and rk6 in xmm10 // 64b fold ext v0.16b, vzr.16b, v7.16b, #8 @@ -291,7 +291,7 @@ _128_done: // barrett reduction _barrett: - ldr q10, rk7 + ldr_l q10, rk7, x8 mov v0.d[0], v7.d[1] pmull v0.1q, v0.1d, v10.1d @@ -321,7 +321,7 @@ CPU_LE( ext v7.16b, v7.16b, v7.16b, #8 ) b.eq _128_done // exactly 16 left b.lt _less_than_16_left - ldr q10, rk1 // rk1 and rk2 in xmm10 + ldr_l q10, rk1, x8 // rk1 and rk2 in xmm10 // update the counter. subtract 32 instead of 16 to save one // instruction from the loop @@ -333,7 +333,7 @@ CPU_LE( ext v7.16b, v7.16b, v7.16b, #8 ) _less_than_16_left: // shl r9, 4 - adr x0, tbl_shf_table + 16 + adr_l x0, tbl_shf_table + 16 sub x0, x0, arg3 ld1 {v0.16b}, [x0] movi v9.16b, #0x80 @@ -345,6 +345,7 @@ ENDPROC(crc_t10dif_pmull) // precomputed constants // these constants are precomputed from the poly: // 0x8bb70000 (0x8bb7 scaled to 32 bits) + .section ".rodata", "a" .align 4 // Q = 0x18BB70000 // rk1 = 2^(32*3) mod Q << 32 diff --git a/arch/arm64/crypto/sha1-ce-core.S b/arch/arm64/crypto/sha1-ce-core.S index 8550408735a0..46049850727d 100644 --- a/arch/arm64/crypto/sha1-ce-core.S +++ b/arch/arm64/crypto/sha1-ce-core.S @@ -58,12 +58,11 @@ sha1su1 v\s0\().4s, v\s3\().4s .endm - /* - * The SHA1 round constants - */ - .align 4 -.Lsha1_rcon: - .word 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6 + .macro loadrc, k, val, tmp + movz \tmp, :abs_g0_nc:\val + movk \tmp, :abs_g1:\val + dup \k, \tmp + .endm /* * void sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src, @@ -71,11 +70,10 @@ */ ENTRY(sha1_ce_transform) /* load round constants */ - adr x6, .Lsha1_rcon - ld1r {k0.4s}, [x6], #4 - ld1r {k1.4s}, [x6], #4 - ld1r {k2.4s}, [x6], #4 - ld1r {k3.4s}, [x6] + loadrc k0.4s, 0x5a827999, w6 + loadrc k1.4s, 0x6ed9eba1, w6 + loadrc k2.4s, 0x8f1bbcdc, w6 + loadrc k3.4s, 0xca62c1d6, w6 /* load state */ ld1 {dgav.4s}, [x0] diff --git a/arch/arm64/crypto/sha2-ce-core.S b/arch/arm64/crypto/sha2-ce-core.S index 679c6c002f4f..4c3c89b812ce 100644 --- a/arch/arm64/crypto/sha2-ce-core.S +++ b/arch/arm64/crypto/sha2-ce-core.S @@ -53,6 +53,7 @@ /* * The SHA-256 round constants */ + .section ".rodata", "a" .align 4 .Lsha2_rcon: .word 0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5 @@ -76,9 +77,10 @@ * void sha2_ce_transform(struct sha256_ce_state *sst, u8 const *src, * int blocks) */ + .text ENTRY(sha2_ce_transform) /* load round constants */ - adr x8, .Lsha2_rcon + adr_l x8, .Lsha2_rcon ld1 { v0.4s- v3.4s}, [x8], #64 ld1 { v4.4s- v7.4s}, [x8], #64 ld1 { v8.4s-v11.4s}, [x8], #64 diff --git a/arch/arm64/crypto/sha3-ce-core.S b/arch/arm64/crypto/sha3-ce-core.S new file mode 100644 index 000000000000..332ad7530690 --- /dev/null +++ b/arch/arm64/crypto/sha3-ce-core.S @@ -0,0 +1,210 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * sha3-ce-core.S - core SHA-3 transform using v8.2 Crypto Extensions + * + * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + + .irp b,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 + .set .Lv\b\().2d, \b + .set .Lv\b\().16b, \b + .endr + + /* + * ARMv8.2 Crypto Extensions instructions + */ + .macro eor3, rd, rn, rm, ra + .inst 0xce000000 | .L\rd | (.L\rn << 5) | (.L\ra << 10) | (.L\rm << 16) + .endm + + .macro rax1, rd, rn, rm + .inst 0xce608c00 | .L\rd | (.L\rn << 5) | (.L\rm << 16) + .endm + + .macro bcax, rd, rn, rm, ra + .inst 0xce200000 | .L\rd | (.L\rn << 5) | (.L\ra << 10) | (.L\rm << 16) + .endm + + .macro xar, rd, rn, rm, imm6 + .inst 0xce800000 | .L\rd | (.L\rn << 5) | ((\imm6) << 10) | (.L\rm << 16) + .endm + + /* + * sha3_ce_transform(u64 *st, const u8 *data, int blocks, int dg_size) + */ + .text +ENTRY(sha3_ce_transform) + /* load state */ + add x8, x0, #32 + ld1 { v0.1d- v3.1d}, [x0] + ld1 { v4.1d- v7.1d}, [x8], #32 + ld1 { v8.1d-v11.1d}, [x8], #32 + ld1 {v12.1d-v15.1d}, [x8], #32 + ld1 {v16.1d-v19.1d}, [x8], #32 + ld1 {v20.1d-v23.1d}, [x8], #32 + ld1 {v24.1d}, [x8] + +0: sub w2, w2, #1 + mov w8, #24 + adr_l x9, .Lsha3_rcon + + /* load input */ + ld1 {v25.8b-v28.8b}, [x1], #32 + ld1 {v29.8b-v31.8b}, [x1], #24 + eor v0.8b, v0.8b, v25.8b + eor v1.8b, v1.8b, v26.8b + eor v2.8b, v2.8b, v27.8b + eor v3.8b, v3.8b, v28.8b + eor v4.8b, v4.8b, v29.8b + eor v5.8b, v5.8b, v30.8b + eor v6.8b, v6.8b, v31.8b + + tbnz x3, #6, 2f // SHA3-512 + + ld1 {v25.8b-v28.8b}, [x1], #32 + ld1 {v29.8b-v30.8b}, [x1], #16 + eor v7.8b, v7.8b, v25.8b + eor v8.8b, v8.8b, v26.8b + eor v9.8b, v9.8b, v27.8b + eor v10.8b, v10.8b, v28.8b + eor v11.8b, v11.8b, v29.8b + eor v12.8b, v12.8b, v30.8b + + tbnz x3, #4, 1f // SHA3-384 or SHA3-224 + + // SHA3-256 + ld1 {v25.8b-v28.8b}, [x1], #32 + eor v13.8b, v13.8b, v25.8b + eor v14.8b, v14.8b, v26.8b + eor v15.8b, v15.8b, v27.8b + eor v16.8b, v16.8b, v28.8b + b 3f + +1: tbz x3, #2, 3f // bit 2 cleared? SHA-384 + + // SHA3-224 + ld1 {v25.8b-v28.8b}, [x1], #32 + ld1 {v29.8b}, [x1], #8 + eor v13.8b, v13.8b, v25.8b + eor v14.8b, v14.8b, v26.8b + eor v15.8b, v15.8b, v27.8b + eor v16.8b, v16.8b, v28.8b + eor v17.8b, v17.8b, v29.8b + b 3f + + // SHA3-512 +2: ld1 {v25.8b-v26.8b}, [x1], #16 + eor v7.8b, v7.8b, v25.8b + eor v8.8b, v8.8b, v26.8b + +3: sub w8, w8, #1 + + eor3 v29.16b, v4.16b, v9.16b, v14.16b + eor3 v26.16b, v1.16b, v6.16b, v11.16b + eor3 v28.16b, v3.16b, v8.16b, v13.16b + eor3 v25.16b, v0.16b, v5.16b, v10.16b + eor3 v27.16b, v2.16b, v7.16b, v12.16b + eor3 v29.16b, v29.16b, v19.16b, v24.16b + eor3 v26.16b, v26.16b, v16.16b, v21.16b + eor3 v28.16b, v28.16b, v18.16b, v23.16b + eor3 v25.16b, v25.16b, v15.16b, v20.16b + eor3 v27.16b, v27.16b, v17.16b, v22.16b + + rax1 v30.2d, v29.2d, v26.2d // bc[0] + rax1 v26.2d, v26.2d, v28.2d // bc[2] + rax1 v28.2d, v28.2d, v25.2d // bc[4] + rax1 v25.2d, v25.2d, v27.2d // bc[1] + rax1 v27.2d, v27.2d, v29.2d // bc[3] + + eor v0.16b, v0.16b, v30.16b + xar v29.2d, v1.2d, v25.2d, (64 - 1) + xar v1.2d, v6.2d, v25.2d, (64 - 44) + xar v6.2d, v9.2d, v28.2d, (64 - 20) + xar v9.2d, v22.2d, v26.2d, (64 - 61) + xar v22.2d, v14.2d, v28.2d, (64 - 39) + xar v14.2d, v20.2d, v30.2d, (64 - 18) + xar v31.2d, v2.2d, v26.2d, (64 - 62) + xar v2.2d, v12.2d, v26.2d, (64 - 43) + xar v12.2d, v13.2d, v27.2d, (64 - 25) + xar v13.2d, v19.2d, v28.2d, (64 - 8) + xar v19.2d, v23.2d, v27.2d, (64 - 56) + xar v23.2d, v15.2d, v30.2d, (64 - 41) + xar v15.2d, v4.2d, v28.2d, (64 - 27) + xar v28.2d, v24.2d, v28.2d, (64 - 14) + xar v24.2d, v21.2d, v25.2d, (64 - 2) + xar v8.2d, v8.2d, v27.2d, (64 - 55) + xar v4.2d, v16.2d, v25.2d, (64 - 45) + xar v16.2d, v5.2d, v30.2d, (64 - 36) + xar v5.2d, v3.2d, v27.2d, (64 - 28) + xar v27.2d, v18.2d, v27.2d, (64 - 21) + xar v3.2d, v17.2d, v26.2d, (64 - 15) + xar v25.2d, v11.2d, v25.2d, (64 - 10) + xar v26.2d, v7.2d, v26.2d, (64 - 6) + xar v30.2d, v10.2d, v30.2d, (64 - 3) + + bcax v20.16b, v31.16b, v22.16b, v8.16b + bcax v21.16b, v8.16b, v23.16b, v22.16b + bcax v22.16b, v22.16b, v24.16b, v23.16b + bcax v23.16b, v23.16b, v31.16b, v24.16b + bcax v24.16b, v24.16b, v8.16b, v31.16b + + ld1r {v31.2d}, [x9], #8 + + bcax v17.16b, v25.16b, v19.16b, v3.16b + bcax v18.16b, v3.16b, v15.16b, v19.16b + bcax v19.16b, v19.16b, v16.16b, v15.16b + bcax v15.16b, v15.16b, v25.16b, v16.16b + bcax v16.16b, v16.16b, v3.16b, v25.16b + + bcax v10.16b, v29.16b, v12.16b, v26.16b + bcax v11.16b, v26.16b, v13.16b, v12.16b + bcax v12.16b, v12.16b, v14.16b, v13.16b + bcax v13.16b, v13.16b, v29.16b, v14.16b + bcax v14.16b, v14.16b, v26.16b, v29.16b + + bcax v7.16b, v30.16b, v9.16b, v4.16b + bcax v8.16b, v4.16b, v5.16b, v9.16b + bcax v9.16b, v9.16b, v6.16b, v5.16b + bcax v5.16b, v5.16b, v30.16b, v6.16b + bcax v6.16b, v6.16b, v4.16b, v30.16b + + bcax v3.16b, v27.16b, v0.16b, v28.16b + bcax v4.16b, v28.16b, v1.16b, v0.16b + bcax v0.16b, v0.16b, v2.16b, v1.16b + bcax v1.16b, v1.16b, v27.16b, v2.16b + bcax v2.16b, v2.16b, v28.16b, v27.16b + + eor v0.16b, v0.16b, v31.16b + + cbnz w8, 3b + cbnz w2, 0b + + /* save state */ + st1 { v0.1d- v3.1d}, [x0], #32 + st1 { v4.1d- v7.1d}, [x0], #32 + st1 { v8.1d-v11.1d}, [x0], #32 + st1 {v12.1d-v15.1d}, [x0], #32 + st1 {v16.1d-v19.1d}, [x0], #32 + st1 {v20.1d-v23.1d}, [x0], #32 + st1 {v24.1d}, [x0] + ret +ENDPROC(sha3_ce_transform) + + .section ".rodata", "a" + .align 8 +.Lsha3_rcon: + .quad 0x0000000000000001, 0x0000000000008082, 0x800000000000808a + .quad 0x8000000080008000, 0x000000000000808b, 0x0000000080000001 + .quad 0x8000000080008081, 0x8000000000008009, 0x000000000000008a + .quad 0x0000000000000088, 0x0000000080008009, 0x000000008000000a + .quad 0x000000008000808b, 0x800000000000008b, 0x8000000000008089 + .quad 0x8000000000008003, 0x8000000000008002, 0x8000000000000080 + .quad 0x000000000000800a, 0x800000008000000a, 0x8000000080008081 + .quad 0x8000000000008080, 0x0000000080000001, 0x8000000080008008 diff --git a/arch/arm64/crypto/sha3-ce-glue.c b/arch/arm64/crypto/sha3-ce-glue.c new file mode 100644 index 000000000000..da8222e528bd --- /dev/null +++ b/arch/arm64/crypto/sha3-ce-glue.c @@ -0,0 +1,161 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * sha3-ce-glue.c - core SHA-3 transform using v8.2 Crypto Extensions + * + * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <asm/hwcap.h> +#include <asm/neon.h> +#include <asm/simd.h> +#include <asm/unaligned.h> +#include <crypto/internal/hash.h> +#include <crypto/sha3.h> +#include <linux/cpufeature.h> +#include <linux/crypto.h> +#include <linux/module.h> + +MODULE_DESCRIPTION("SHA3 secure hash using ARMv8 Crypto Extensions"); +MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); +MODULE_LICENSE("GPL v2"); + +asmlinkage void sha3_ce_transform(u64 *st, const u8 *data, int blocks, + int md_len); + +static int sha3_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha3_state *sctx = shash_desc_ctx(desc); + unsigned int digest_size = crypto_shash_digestsize(desc->tfm); + + if (!may_use_simd()) + return crypto_sha3_update(desc, data, len); + + if ((sctx->partial + len) >= sctx->rsiz) { + int blocks; + + if (sctx->partial) { + int p = sctx->rsiz - sctx->partial; + + memcpy(sctx->buf + sctx->partial, data, p); + kernel_neon_begin(); + sha3_ce_transform(sctx->st, sctx->buf, 1, digest_size); + kernel_neon_end(); + + data += p; + len -= p; + sctx->partial = 0; + } + + blocks = len / sctx->rsiz; + len %= sctx->rsiz; + + if (blocks) { + kernel_neon_begin(); + sha3_ce_transform(sctx->st, data, blocks, digest_size); + kernel_neon_end(); + data += blocks * sctx->rsiz; + } + } + + if (len) { + memcpy(sctx->buf + sctx->partial, data, len); + sctx->partial += len; + } + return 0; +} + +static int sha3_final(struct shash_desc *desc, u8 *out) +{ + struct sha3_state *sctx = shash_desc_ctx(desc); + unsigned int digest_size = crypto_shash_digestsize(desc->tfm); + __le64 *digest = (__le64 *)out; + int i; + + if (!may_use_simd()) + return crypto_sha3_final(desc, out); + + sctx->buf[sctx->partial++] = 0x06; + memset(sctx->buf + sctx->partial, 0, sctx->rsiz - sctx->partial); + sctx->buf[sctx->rsiz - 1] |= 0x80; + + kernel_neon_begin(); + sha3_ce_transform(sctx->st, sctx->buf, 1, digest_size); + kernel_neon_end(); + + for (i = 0; i < digest_size / 8; i++) + put_unaligned_le64(sctx->st[i], digest++); + + if (digest_size & 4) + put_unaligned_le32(sctx->st[i], (__le32 *)digest); + + *sctx = (struct sha3_state){}; + return 0; +} + +static struct shash_alg algs[] = { { + .digestsize = SHA3_224_DIGEST_SIZE, + .init = crypto_sha3_init, + .update = sha3_update, + .final = sha3_final, + .descsize = sizeof(struct sha3_state), + .base.cra_name = "sha3-224", + .base.cra_driver_name = "sha3-224-ce", + .base.cra_flags = CRYPTO_ALG_TYPE_SHASH, + .base.cra_blocksize = SHA3_224_BLOCK_SIZE, + .base.cra_module = THIS_MODULE, + .base.cra_priority = 200, +}, { + .digestsize = SHA3_256_DIGEST_SIZE, + .init = crypto_sha3_init, + .update = sha3_update, + .final = sha3_final, + .descsize = sizeof(struct sha3_state), + .base.cra_name = "sha3-256", + .base.cra_driver_name = "sha3-256-ce", + .base.cra_flags = CRYPTO_ALG_TYPE_SHASH, + .base.cra_blocksize = SHA3_256_BLOCK_SIZE, + .base.cra_module = THIS_MODULE, + .base.cra_priority = 200, +}, { + .digestsize = SHA3_384_DIGEST_SIZE, + .init = crypto_sha3_init, + .update = sha3_update, + .final = sha3_final, + .descsize = sizeof(struct sha3_state), + .base.cra_name = "sha3-384", + .base.cra_driver_name = "sha3-384-ce", + .base.cra_flags = CRYPTO_ALG_TYPE_SHASH, + .base.cra_blocksize = SHA3_384_BLOCK_SIZE, + .base.cra_module = THIS_MODULE, + .base.cra_priority = 200, +}, { + .digestsize = SHA3_512_DIGEST_SIZE, + .init = crypto_sha3_init, + .update = sha3_update, + .final = sha3_final, + .descsize = sizeof(struct sha3_state), + .base.cra_name = "sha3-512", + .base.cra_driver_name = "sha3-512-ce", + .base.cra_flags = CRYPTO_ALG_TYPE_SHASH, + .base.cra_blocksize = SHA3_512_BLOCK_SIZE, + .base.cra_module = THIS_MODULE, + .base.cra_priority = 200, +} }; + +static int __init sha3_neon_mod_init(void) +{ + return crypto_register_shashes(algs, ARRAY_SIZE(algs)); +} + +static void __exit sha3_neon_mod_fini(void) +{ + crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); +} + +module_cpu_feature_match(SHA3, sha3_neon_mod_init); +module_exit(sha3_neon_mod_fini); diff --git a/arch/arm64/crypto/sha512-ce-core.S b/arch/arm64/crypto/sha512-ce-core.S new file mode 100644 index 000000000000..7f3bca5c59a2 --- /dev/null +++ b/arch/arm64/crypto/sha512-ce-core.S @@ -0,0 +1,204 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * sha512-ce-core.S - core SHA-384/SHA-512 transform using v8 Crypto Extensions + * + * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + + .irp b,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19 + .set .Lq\b, \b + .set .Lv\b\().2d, \b + .endr + + .macro sha512h, rd, rn, rm + .inst 0xce608000 | .L\rd | (.L\rn << 5) | (.L\rm << 16) + .endm + + .macro sha512h2, rd, rn, rm + .inst 0xce608400 | .L\rd | (.L\rn << 5) | (.L\rm << 16) + .endm + + .macro sha512su0, rd, rn + .inst 0xcec08000 | .L\rd | (.L\rn << 5) + .endm + + .macro sha512su1, rd, rn, rm + .inst 0xce608800 | .L\rd | (.L\rn << 5) | (.L\rm << 16) + .endm + + /* + * The SHA-512 round constants + */ + .section ".rodata", "a" + .align 4 +.Lsha512_rcon: + .quad 0x428a2f98d728ae22, 0x7137449123ef65cd + .quad 0xb5c0fbcfec4d3b2f, 0xe9b5dba58189dbbc + .quad 0x3956c25bf348b538, 0x59f111f1b605d019 + .quad 0x923f82a4af194f9b, 0xab1c5ed5da6d8118 + .quad 0xd807aa98a3030242, 0x12835b0145706fbe + .quad 0x243185be4ee4b28c, 0x550c7dc3d5ffb4e2 + .quad 0x72be5d74f27b896f, 0x80deb1fe3b1696b1 + .quad 0x9bdc06a725c71235, 0xc19bf174cf692694 + .quad 0xe49b69c19ef14ad2, 0xefbe4786384f25e3 + .quad 0x0fc19dc68b8cd5b5, 0x240ca1cc77ac9c65 + .quad 0x2de92c6f592b0275, 0x4a7484aa6ea6e483 + .quad 0x5cb0a9dcbd41fbd4, 0x76f988da831153b5 + .quad 0x983e5152ee66dfab, 0xa831c66d2db43210 + .quad 0xb00327c898fb213f, 0xbf597fc7beef0ee4 + .quad 0xc6e00bf33da88fc2, 0xd5a79147930aa725 + .quad 0x06ca6351e003826f, 0x142929670a0e6e70 + .quad 0x27b70a8546d22ffc, 0x2e1b21385c26c926 + .quad 0x4d2c6dfc5ac42aed, 0x53380d139d95b3df + .quad 0x650a73548baf63de, 0x766a0abb3c77b2a8 + .quad 0x81c2c92e47edaee6, 0x92722c851482353b + .quad 0xa2bfe8a14cf10364, 0xa81a664bbc423001 + .quad 0xc24b8b70d0f89791, 0xc76c51a30654be30 + .quad 0xd192e819d6ef5218, 0xd69906245565a910 + .quad 0xf40e35855771202a, 0x106aa07032bbd1b8 + .quad 0x19a4c116b8d2d0c8, 0x1e376c085141ab53 + .quad 0x2748774cdf8eeb99, 0x34b0bcb5e19b48a8 + .quad 0x391c0cb3c5c95a63, 0x4ed8aa4ae3418acb + .quad 0x5b9cca4f7763e373, 0x682e6ff3d6b2b8a3 + .quad 0x748f82ee5defb2fc, 0x78a5636f43172f60 + .quad 0x84c87814a1f0ab72, 0x8cc702081a6439ec + .quad 0x90befffa23631e28, 0xa4506cebde82bde9 + .quad 0xbef9a3f7b2c67915, 0xc67178f2e372532b + .quad 0xca273eceea26619c, 0xd186b8c721c0c207 + .quad 0xeada7dd6cde0eb1e, 0xf57d4f7fee6ed178 + .quad 0x06f067aa72176fba, 0x0a637dc5a2c898a6 + .quad 0x113f9804bef90dae, 0x1b710b35131c471b + .quad 0x28db77f523047d84, 0x32caab7b40c72493 + .quad 0x3c9ebe0a15c9bebc, 0x431d67c49c100d4c + .quad 0x4cc5d4becb3e42b6, 0x597f299cfc657e2a + .quad 0x5fcb6fab3ad6faec, 0x6c44198c4a475817 + + .macro dround, i0, i1, i2, i3, i4, rc0, rc1, in0, in1, in2, in3, in4 + .ifnb \rc1 + ld1 {v\rc1\().2d}, [x4], #16 + .endif + add v5.2d, v\rc0\().2d, v\in0\().2d + ext v6.16b, v\i2\().16b, v\i3\().16b, #8 + ext v5.16b, v5.16b, v5.16b, #8 + ext v7.16b, v\i1\().16b, v\i2\().16b, #8 + add v\i3\().2d, v\i3\().2d, v5.2d + .ifnb \in1 + ext v5.16b, v\in3\().16b, v\in4\().16b, #8 + sha512su0 v\in0\().2d, v\in1\().2d + .endif + sha512h q\i3, q6, v7.2d + .ifnb \in1 + sha512su1 v\in0\().2d, v\in2\().2d, v5.2d + .endif + add v\i4\().2d, v\i1\().2d, v\i3\().2d + sha512h2 q\i3, q\i1, v\i0\().2d + .endm + + /* + * void sha512_ce_transform(struct sha512_state *sst, u8 const *src, + * int blocks) + */ + .text +ENTRY(sha512_ce_transform) + /* load state */ + ld1 {v8.2d-v11.2d}, [x0] + + /* load first 4 round constants */ + adr_l x3, .Lsha512_rcon + ld1 {v20.2d-v23.2d}, [x3], #64 + + /* load input */ +0: ld1 {v12.2d-v15.2d}, [x1], #64 + ld1 {v16.2d-v19.2d}, [x1], #64 + sub w2, w2, #1 + +CPU_LE( rev64 v12.16b, v12.16b ) +CPU_LE( rev64 v13.16b, v13.16b ) +CPU_LE( rev64 v14.16b, v14.16b ) +CPU_LE( rev64 v15.16b, v15.16b ) +CPU_LE( rev64 v16.16b, v16.16b ) +CPU_LE( rev64 v17.16b, v17.16b ) +CPU_LE( rev64 v18.16b, v18.16b ) +CPU_LE( rev64 v19.16b, v19.16b ) + + mov x4, x3 // rc pointer + + mov v0.16b, v8.16b + mov v1.16b, v9.16b + mov v2.16b, v10.16b + mov v3.16b, v11.16b + + // v0 ab cd -- ef gh ab + // v1 cd -- ef gh ab cd + // v2 ef gh ab cd -- ef + // v3 gh ab cd -- ef gh + // v4 -- ef gh ab cd -- + + dround 0, 1, 2, 3, 4, 20, 24, 12, 13, 19, 16, 17 + dround 3, 0, 4, 2, 1, 21, 25, 13, 14, 12, 17, 18 + dround 2, 3, 1, 4, 0, 22, 26, 14, 15, 13, 18, 19 + dround 4, 2, 0, 1, 3, 23, 27, 15, 16, 14, 19, 12 + dround 1, 4, 3, 0, 2, 24, 28, 16, 17, 15, 12, 13 + + dround 0, 1, 2, 3, 4, 25, 29, 17, 18, 16, 13, 14 + dround 3, 0, 4, 2, 1, 26, 30, 18, 19, 17, 14, 15 + dround 2, 3, 1, 4, 0, 27, 31, 19, 12, 18, 15, 16 + dround 4, 2, 0, 1, 3, 28, 24, 12, 13, 19, 16, 17 + dround 1, 4, 3, 0, 2, 29, 25, 13, 14, 12, 17, 18 + + dround 0, 1, 2, 3, 4, 30, 26, 14, 15, 13, 18, 19 + dround 3, 0, 4, 2, 1, 31, 27, 15, 16, 14, 19, 12 + dround 2, 3, 1, 4, 0, 24, 28, 16, 17, 15, 12, 13 + dround 4, 2, 0, 1, 3, 25, 29, 17, 18, 16, 13, 14 + dround 1, 4, 3, 0, 2, 26, 30, 18, 19, 17, 14, 15 + + dround 0, 1, 2, 3, 4, 27, 31, 19, 12, 18, 15, 16 + dround 3, 0, 4, 2, 1, 28, 24, 12, 13, 19, 16, 17 + dround 2, 3, 1, 4, 0, 29, 25, 13, 14, 12, 17, 18 + dround 4, 2, 0, 1, 3, 30, 26, 14, 15, 13, 18, 19 + dround 1, 4, 3, 0, 2, 31, 27, 15, 16, 14, 19, 12 + + dround 0, 1, 2, 3, 4, 24, 28, 16, 17, 15, 12, 13 + dround 3, 0, 4, 2, 1, 25, 29, 17, 18, 16, 13, 14 + dround 2, 3, 1, 4, 0, 26, 30, 18, 19, 17, 14, 15 + dround 4, 2, 0, 1, 3, 27, 31, 19, 12, 18, 15, 16 + dround 1, 4, 3, 0, 2, 28, 24, 12, 13, 19, 16, 17 + + dround 0, 1, 2, 3, 4, 29, 25, 13, 14, 12, 17, 18 + dround 3, 0, 4, 2, 1, 30, 26, 14, 15, 13, 18, 19 + dround 2, 3, 1, 4, 0, 31, 27, 15, 16, 14, 19, 12 + dround 4, 2, 0, 1, 3, 24, 28, 16, 17, 15, 12, 13 + dround 1, 4, 3, 0, 2, 25, 29, 17, 18, 16, 13, 14 + + dround 0, 1, 2, 3, 4, 26, 30, 18, 19, 17, 14, 15 + dround 3, 0, 4, 2, 1, 27, 31, 19, 12, 18, 15, 16 + dround 2, 3, 1, 4, 0, 28, 24, 12 + dround 4, 2, 0, 1, 3, 29, 25, 13 + dround 1, 4, 3, 0, 2, 30, 26, 14 + + dround 0, 1, 2, 3, 4, 31, 27, 15 + dround 3, 0, 4, 2, 1, 24, , 16 + dround 2, 3, 1, 4, 0, 25, , 17 + dround 4, 2, 0, 1, 3, 26, , 18 + dround 1, 4, 3, 0, 2, 27, , 19 + + /* update state */ + add v8.2d, v8.2d, v0.2d + add v9.2d, v9.2d, v1.2d + add v10.2d, v10.2d, v2.2d + add v11.2d, v11.2d, v3.2d + + /* handled all input blocks? */ + cbnz w2, 0b + + /* store new state */ +3: st1 {v8.2d-v11.2d}, [x0] + ret +ENDPROC(sha512_ce_transform) diff --git a/arch/arm64/crypto/sha512-ce-glue.c b/arch/arm64/crypto/sha512-ce-glue.c new file mode 100644 index 000000000000..a77c8632a589 --- /dev/null +++ b/arch/arm64/crypto/sha512-ce-glue.c @@ -0,0 +1,119 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * sha512-ce-glue.c - SHA-384/SHA-512 using ARMv8 Crypto Extensions + * + * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <asm/neon.h> +#include <asm/simd.h> +#include <asm/unaligned.h> +#include <crypto/internal/hash.h> +#include <crypto/sha.h> +#include <crypto/sha512_base.h> +#include <linux/cpufeature.h> +#include <linux/crypto.h> +#include <linux/module.h> + +MODULE_DESCRIPTION("SHA-384/SHA-512 secure hash using ARMv8 Crypto Extensions"); +MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); +MODULE_LICENSE("GPL v2"); + +asmlinkage void sha512_ce_transform(struct sha512_state *sst, u8 const *src, + int blocks); + +asmlinkage void sha512_block_data_order(u64 *digest, u8 const *src, int blocks); + +static int sha512_ce_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + if (!may_use_simd()) + return sha512_base_do_update(desc, data, len, + (sha512_block_fn *)sha512_block_data_order); + + kernel_neon_begin(); + sha512_base_do_update(desc, data, len, + (sha512_block_fn *)sha512_ce_transform); + kernel_neon_end(); + + return 0; +} + +static int sha512_ce_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) +{ + if (!may_use_simd()) { + if (len) + sha512_base_do_update(desc, data, len, + (sha512_block_fn *)sha512_block_data_order); + sha512_base_do_finalize(desc, + (sha512_block_fn *)sha512_block_data_order); + return sha512_base_finish(desc, out); + } + + kernel_neon_begin(); + sha512_base_do_update(desc, data, len, + (sha512_block_fn *)sha512_ce_transform); + sha512_base_do_finalize(desc, (sha512_block_fn *)sha512_ce_transform); + kernel_neon_end(); + return sha512_base_finish(desc, out); +} + +static int sha512_ce_final(struct shash_desc *desc, u8 *out) +{ + if (!may_use_simd()) { + sha512_base_do_finalize(desc, + (sha512_block_fn *)sha512_block_data_order); + return sha512_base_finish(desc, out); + } + + kernel_neon_begin(); + sha512_base_do_finalize(desc, (sha512_block_fn *)sha512_ce_transform); + kernel_neon_end(); + return sha512_base_finish(desc, out); +} + +static struct shash_alg algs[] = { { + .init = sha384_base_init, + .update = sha512_ce_update, + .final = sha512_ce_final, + .finup = sha512_ce_finup, + .descsize = sizeof(struct sha512_state), + .digestsize = SHA384_DIGEST_SIZE, + .base.cra_name = "sha384", + .base.cra_driver_name = "sha384-ce", + .base.cra_priority = 200, + .base.cra_flags = CRYPTO_ALG_TYPE_SHASH, + .base.cra_blocksize = SHA512_BLOCK_SIZE, + .base.cra_module = THIS_MODULE, +}, { + .init = sha512_base_init, + .update = sha512_ce_update, + .final = sha512_ce_final, + .finup = sha512_ce_finup, + .descsize = sizeof(struct sha512_state), + .digestsize = SHA512_DIGEST_SIZE, + .base.cra_name = "sha512", + .base.cra_driver_name = "sha512-ce", + .base.cra_priority = 200, + .base.cra_flags = CRYPTO_ALG_TYPE_SHASH, + .base.cra_blocksize = SHA512_BLOCK_SIZE, + .base.cra_module = THIS_MODULE, +} }; + +static int __init sha512_ce_mod_init(void) +{ + return crypto_register_shashes(algs, ARRAY_SIZE(algs)); +} + +static void __exit sha512_ce_mod_fini(void) +{ + crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); +} + +module_cpu_feature_match(SHA512, sha512_ce_mod_init); +module_exit(sha512_ce_mod_fini); diff --git a/arch/arm64/crypto/sha512-glue.c b/arch/arm64/crypto/sha512-glue.c index aff35c9992a4..27db4851e380 100644 --- a/arch/arm64/crypto/sha512-glue.c +++ b/arch/arm64/crypto/sha512-glue.c @@ -27,6 +27,7 @@ MODULE_ALIAS_CRYPTO("sha512"); asmlinkage void sha512_block_data_order(u32 *digest, const void *data, unsigned int num_blks); +EXPORT_SYMBOL(sha512_block_data_order); static int sha512_update(struct shash_desc *desc, const u8 *data, unsigned int len) diff --git a/arch/arm64/crypto/sm3-ce-core.S b/arch/arm64/crypto/sm3-ce-core.S new file mode 100644 index 000000000000..27169fe07a68 --- /dev/null +++ b/arch/arm64/crypto/sm3-ce-core.S @@ -0,0 +1,141 @@ +/* + * sm3-ce-core.S - SM3 secure hash using ARMv8.2 Crypto Extensions + * + * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + + .irp b, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 + .set .Lv\b\().4s, \b + .endr + + .macro sm3partw1, rd, rn, rm + .inst 0xce60c000 | .L\rd | (.L\rn << 5) | (.L\rm << 16) + .endm + + .macro sm3partw2, rd, rn, rm + .inst 0xce60c400 | .L\rd | (.L\rn << 5) | (.L\rm << 16) + .endm + + .macro sm3ss1, rd, rn, rm, ra + .inst 0xce400000 | .L\rd | (.L\rn << 5) | (.L\ra << 10) | (.L\rm << 16) + .endm + + .macro sm3tt1a, rd, rn, rm, imm2 + .inst 0xce408000 | .L\rd | (.L\rn << 5) | ((\imm2) << 12) | (.L\rm << 16) + .endm + + .macro sm3tt1b, rd, rn, rm, imm2 + .inst 0xce408400 | .L\rd | (.L\rn << 5) | ((\imm2) << 12) | (.L\rm << 16) + .endm + + .macro sm3tt2a, rd, rn, rm, imm2 + .inst 0xce408800 | .L\rd | (.L\rn << 5) | ((\imm2) << 12) | (.L\rm << 16) + .endm + + .macro sm3tt2b, rd, rn, rm, imm2 + .inst 0xce408c00 | .L\rd | (.L\rn << 5) | ((\imm2) << 12) | (.L\rm << 16) + .endm + + .macro round, ab, s0, t0, t1, i + sm3ss1 v5.4s, v8.4s, \t0\().4s, v9.4s + shl \t1\().4s, \t0\().4s, #1 + sri \t1\().4s, \t0\().4s, #31 + sm3tt1\ab v8.4s, v5.4s, v10.4s, \i + sm3tt2\ab v9.4s, v5.4s, \s0\().4s, \i + .endm + + .macro qround, ab, s0, s1, s2, s3, s4 + .ifnb \s4 + ext \s4\().16b, \s1\().16b, \s2\().16b, #12 + ext v6.16b, \s0\().16b, \s1\().16b, #12 + ext v7.16b, \s2\().16b, \s3\().16b, #8 + sm3partw1 \s4\().4s, \s0\().4s, \s3\().4s + .endif + + eor v10.16b, \s0\().16b, \s1\().16b + + round \ab, \s0, v11, v12, 0 + round \ab, \s0, v12, v11, 1 + round \ab, \s0, v11, v12, 2 + round \ab, \s0, v12, v11, 3 + + .ifnb \s4 + sm3partw2 \s4\().4s, v7.4s, v6.4s + .endif + .endm + + /* + * void sm3_ce_transform(struct sm3_state *sst, u8 const *src, + * int blocks) + */ + .text +ENTRY(sm3_ce_transform) + /* load state */ + ld1 {v8.4s-v9.4s}, [x0] + rev64 v8.4s, v8.4s + rev64 v9.4s, v9.4s + ext v8.16b, v8.16b, v8.16b, #8 + ext v9.16b, v9.16b, v9.16b, #8 + + adr_l x8, .Lt + ldp s13, s14, [x8] + + /* load input */ +0: ld1 {v0.16b-v3.16b}, [x1], #64 + sub w2, w2, #1 + + mov v15.16b, v8.16b + mov v16.16b, v9.16b + +CPU_LE( rev32 v0.16b, v0.16b ) +CPU_LE( rev32 v1.16b, v1.16b ) +CPU_LE( rev32 v2.16b, v2.16b ) +CPU_LE( rev32 v3.16b, v3.16b ) + + ext v11.16b, v13.16b, v13.16b, #4 + + qround a, v0, v1, v2, v3, v4 + qround a, v1, v2, v3, v4, v0 + qround a, v2, v3, v4, v0, v1 + qround a, v3, v4, v0, v1, v2 + + ext v11.16b, v14.16b, v14.16b, #4 + + qround b, v4, v0, v1, v2, v3 + qround b, v0, v1, v2, v3, v4 + qround b, v1, v2, v3, v4, v0 + qround b, v2, v3, v4, v0, v1 + qround b, v3, v4, v0, v1, v2 + qround b, v4, v0, v1, v2, v3 + qround b, v0, v1, v2, v3, v4 + qround b, v1, v2, v3, v4, v0 + qround b, v2, v3, v4, v0, v1 + qround b, v3, v4 + qround b, v4, v0 + qround b, v0, v1 + + eor v8.16b, v8.16b, v15.16b + eor v9.16b, v9.16b, v16.16b + + /* handled all input blocks? */ + cbnz w2, 0b + + /* save state */ + rev64 v8.4s, v8.4s + rev64 v9.4s, v9.4s + ext v8.16b, v8.16b, v8.16b, #8 + ext v9.16b, v9.16b, v9.16b, #8 + st1 {v8.4s-v9.4s}, [x0] + ret +ENDPROC(sm3_ce_transform) + + .section ".rodata", "a" + .align 3 +.Lt: .word 0x79cc4519, 0x9d8a7a87 diff --git a/arch/arm64/crypto/sm3-ce-glue.c b/arch/arm64/crypto/sm3-ce-glue.c new file mode 100644 index 000000000000..3b4948f7e26f --- /dev/null +++ b/arch/arm64/crypto/sm3-ce-glue.c @@ -0,0 +1,92 @@ +/* + * sm3-ce-glue.c - SM3 secure hash using ARMv8.2 Crypto Extensions + * + * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <asm/neon.h> +#include <asm/simd.h> +#include <asm/unaligned.h> +#include <crypto/internal/hash.h> +#include <crypto/sm3.h> +#include <crypto/sm3_base.h> +#include <linux/cpufeature.h> +#include <linux/crypto.h> +#include <linux/module.h> + +MODULE_DESCRIPTION("SM3 secure hash using ARMv8 Crypto Extensions"); +MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); +MODULE_LICENSE("GPL v2"); + +asmlinkage void sm3_ce_transform(struct sm3_state *sst, u8 const *src, + int blocks); + +static int sm3_ce_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + if (!may_use_simd()) + return crypto_sm3_update(desc, data, len); + + kernel_neon_begin(); + sm3_base_do_update(desc, data, len, sm3_ce_transform); + kernel_neon_end(); + + return 0; +} + +static int sm3_ce_final(struct shash_desc *desc, u8 *out) +{ + if (!may_use_simd()) + return crypto_sm3_finup(desc, NULL, 0, out); + + kernel_neon_begin(); + sm3_base_do_finalize(desc, sm3_ce_transform); + kernel_neon_end(); + + return sm3_base_finish(desc, out); +} + +static int sm3_ce_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) +{ + if (!may_use_simd()) + return crypto_sm3_finup(desc, data, len, out); + + kernel_neon_begin(); + sm3_base_do_update(desc, data, len, sm3_ce_transform); + kernel_neon_end(); + + return sm3_ce_final(desc, out); +} + +static struct shash_alg sm3_alg = { + .digestsize = SM3_DIGEST_SIZE, + .init = sm3_base_init, + .update = sm3_ce_update, + .final = sm3_ce_final, + .finup = sm3_ce_finup, + .descsize = sizeof(struct sm3_state), + .base.cra_name = "sm3", + .base.cra_driver_name = "sm3-ce", + .base.cra_flags = CRYPTO_ALG_TYPE_SHASH, + .base.cra_blocksize = SM3_BLOCK_SIZE, + .base.cra_module = THIS_MODULE, + .base.cra_priority = 200, +}; + +static int __init sm3_ce_mod_init(void) +{ + return crypto_register_shash(&sm3_alg); +} + +static void __exit sm3_ce_mod_fini(void) +{ + crypto_unregister_shash(&sm3_alg); +} + +module_cpu_feature_match(SM3, sm3_ce_mod_init); +module_exit(sm3_ce_mod_fini); diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild index e63d0a8312de..3a9b84d39d71 100644 --- a/arch/arm64/include/asm/Kbuild +++ b/arch/arm64/include/asm/Kbuild @@ -1,5 +1,4 @@ generic-y += bugs.h -generic-y += clkdev.h generic-y += delay.h generic-y += div64.h generic-y += dma.h diff --git a/arch/arm64/include/asm/alternative.h b/arch/arm64/include/asm/alternative.h index 4a85c6952a22..669028172fd6 100644 --- a/arch/arm64/include/asm/alternative.h +++ b/arch/arm64/include/asm/alternative.h @@ -12,6 +12,8 @@ #include <linux/stddef.h> #include <linux/stringify.h> +extern int alternatives_applied; + struct alt_instr { s32 orig_offset; /* offset to original instruction */ s32 alt_offset; /* offset to replacement instruction */ diff --git a/arch/arm64/include/asm/arm_dsu_pmu.h b/arch/arm64/include/asm/arm_dsu_pmu.h new file mode 100644 index 000000000000..82e5cc3356bf --- /dev/null +++ b/arch/arm64/include/asm/arm_dsu_pmu.h @@ -0,0 +1,129 @@ +/* + * ARM DynamIQ Shared Unit (DSU) PMU Low level register access routines. + * + * Copyright (C) ARM Limited, 2017. + * + * Author: Suzuki K Poulose <suzuki.poulose@arm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, as published by the Free Software Foundation. + */ + +#include <linux/bitops.h> +#include <linux/build_bug.h> +#include <linux/compiler.h> +#include <linux/types.h> +#include <asm/barrier.h> +#include <asm/sysreg.h> + + +#define CLUSTERPMCR_EL1 sys_reg(3, 0, 15, 5, 0) +#define CLUSTERPMCNTENSET_EL1 sys_reg(3, 0, 15, 5, 1) +#define CLUSTERPMCNTENCLR_EL1 sys_reg(3, 0, 15, 5, 2) +#define CLUSTERPMOVSSET_EL1 sys_reg(3, 0, 15, 5, 3) +#define CLUSTERPMOVSCLR_EL1 sys_reg(3, 0, 15, 5, 4) +#define CLUSTERPMSELR_EL1 sys_reg(3, 0, 15, 5, 5) +#define CLUSTERPMINTENSET_EL1 sys_reg(3, 0, 15, 5, 6) +#define CLUSTERPMINTENCLR_EL1 sys_reg(3, 0, 15, 5, 7) +#define CLUSTERPMCCNTR_EL1 sys_reg(3, 0, 15, 6, 0) +#define CLUSTERPMXEVTYPER_EL1 sys_reg(3, 0, 15, 6, 1) +#define CLUSTERPMXEVCNTR_EL1 sys_reg(3, 0, 15, 6, 2) +#define CLUSTERPMMDCR_EL1 sys_reg(3, 0, 15, 6, 3) +#define CLUSTERPMCEID0_EL1 sys_reg(3, 0, 15, 6, 4) +#define CLUSTERPMCEID1_EL1 sys_reg(3, 0, 15, 6, 5) + +static inline u32 __dsu_pmu_read_pmcr(void) +{ + return read_sysreg_s(CLUSTERPMCR_EL1); +} + +static inline void __dsu_pmu_write_pmcr(u32 val) +{ + write_sysreg_s(val, CLUSTERPMCR_EL1); + isb(); +} + +static inline u32 __dsu_pmu_get_reset_overflow(void) +{ + u32 val = read_sysreg_s(CLUSTERPMOVSCLR_EL1); + /* Clear the bit */ + write_sysreg_s(val, CLUSTERPMOVSCLR_EL1); + isb(); + return val; +} + +static inline void __dsu_pmu_select_counter(int counter) +{ + write_sysreg_s(counter, CLUSTERPMSELR_EL1); + isb(); +} + +static inline u64 __dsu_pmu_read_counter(int counter) +{ + __dsu_pmu_select_counter(counter); + return read_sysreg_s(CLUSTERPMXEVCNTR_EL1); +} + +static inline void __dsu_pmu_write_counter(int counter, u64 val) +{ + __dsu_pmu_select_counter(counter); + write_sysreg_s(val, CLUSTERPMXEVCNTR_EL1); + isb(); +} + +static inline void __dsu_pmu_set_event(int counter, u32 event) +{ + __dsu_pmu_select_counter(counter); + write_sysreg_s(event, CLUSTERPMXEVTYPER_EL1); + isb(); +} + +static inline u64 __dsu_pmu_read_pmccntr(void) +{ + return read_sysreg_s(CLUSTERPMCCNTR_EL1); +} + +static inline void __dsu_pmu_write_pmccntr(u64 val) +{ + write_sysreg_s(val, CLUSTERPMCCNTR_EL1); + isb(); +} + +static inline void __dsu_pmu_disable_counter(int counter) +{ + write_sysreg_s(BIT(counter), CLUSTERPMCNTENCLR_EL1); + isb(); +} + +static inline void __dsu_pmu_enable_counter(int counter) +{ + write_sysreg_s(BIT(counter), CLUSTERPMCNTENSET_EL1); + isb(); +} + +static inline void __dsu_pmu_counter_interrupt_enable(int counter) +{ + write_sysreg_s(BIT(counter), CLUSTERPMINTENSET_EL1); + isb(); +} + +static inline void __dsu_pmu_counter_interrupt_disable(int counter) +{ + write_sysreg_s(BIT(counter), CLUSTERPMINTENCLR_EL1); + isb(); +} + + +static inline u32 __dsu_pmu_read_pmceid(int n) +{ + switch (n) { + case 0: + return read_sysreg_s(CLUSTERPMCEID0_EL1); + case 1: + return read_sysreg_s(CLUSTERPMCEID1_EL1); + default: + BUILD_BUG(); + return 0; + } +} diff --git a/arch/arm64/include/asm/asm-uaccess.h b/arch/arm64/include/asm/asm-uaccess.h index b3da6c886835..4128bec033f6 100644 --- a/arch/arm64/include/asm/asm-uaccess.h +++ b/arch/arm64/include/asm/asm-uaccess.h @@ -4,6 +4,7 @@ #include <asm/alternative.h> #include <asm/kernel-pgtable.h> +#include <asm/mmu.h> #include <asm/sysreg.h> #include <asm/assembler.h> @@ -12,52 +13,63 @@ */ #ifdef CONFIG_ARM64_SW_TTBR0_PAN .macro __uaccess_ttbr0_disable, tmp1 - mrs \tmp1, ttbr1_el1 // swapper_pg_dir - add \tmp1, \tmp1, #SWAPPER_DIR_SIZE // reserved_ttbr0 at the end of swapper_pg_dir - msr ttbr0_el1, \tmp1 // set reserved TTBR0_EL1 + mrs \tmp1, ttbr1_el1 // swapper_pg_dir + bic \tmp1, \tmp1, #TTBR_ASID_MASK + sub \tmp1, \tmp1, #RESERVED_TTBR0_SIZE // reserved_ttbr0 just before swapper_pg_dir + msr ttbr0_el1, \tmp1 // set reserved TTBR0_EL1 + isb + add \tmp1, \tmp1, #RESERVED_TTBR0_SIZE + msr ttbr1_el1, \tmp1 // set reserved ASID isb .endm - .macro __uaccess_ttbr0_enable, tmp1 + .macro __uaccess_ttbr0_enable, tmp1, tmp2 get_thread_info \tmp1 ldr \tmp1, [\tmp1, #TSK_TI_TTBR0] // load saved TTBR0_EL1 + mrs \tmp2, ttbr1_el1 + extr \tmp2, \tmp2, \tmp1, #48 + ror \tmp2, \tmp2, #16 + msr ttbr1_el1, \tmp2 // set the active ASID + isb msr ttbr0_el1, \tmp1 // set the non-PAN TTBR0_EL1 isb .endm - .macro uaccess_ttbr0_disable, tmp1 + .macro uaccess_ttbr0_disable, tmp1, tmp2 alternative_if_not ARM64_HAS_PAN + save_and_disable_irq \tmp2 // avoid preemption __uaccess_ttbr0_disable \tmp1 + restore_irq \tmp2 alternative_else_nop_endif .endm - .macro uaccess_ttbr0_enable, tmp1, tmp2 + .macro uaccess_ttbr0_enable, tmp1, tmp2, tmp3 alternative_if_not ARM64_HAS_PAN - save_and_disable_irq \tmp2 // avoid preemption - __uaccess_ttbr0_enable \tmp1 - restore_irq \tmp2 + save_and_disable_irq \tmp3 // avoid preemption + __uaccess_ttbr0_enable \tmp1, \tmp2 + restore_irq \tmp3 alternative_else_nop_endif .endm #else - .macro uaccess_ttbr0_disable, tmp1 + .macro uaccess_ttbr0_disable, tmp1, tmp2 .endm - .macro uaccess_ttbr0_enable, tmp1, tmp2 + .macro uaccess_ttbr0_enable, tmp1, tmp2, tmp3 .endm #endif /* * These macros are no-ops when UAO is present. */ - .macro uaccess_disable_not_uao, tmp1 - uaccess_ttbr0_disable \tmp1 + .macro uaccess_disable_not_uao, tmp1, tmp2 + uaccess_ttbr0_disable \tmp1, \tmp2 alternative_if ARM64_ALT_PAN_NOT_UAO SET_PSTATE_PAN(1) alternative_else_nop_endif .endm - .macro uaccess_enable_not_uao, tmp1, tmp2 - uaccess_ttbr0_enable \tmp1, \tmp2 + .macro uaccess_enable_not_uao, tmp1, tmp2, tmp3 + uaccess_ttbr0_enable \tmp1, \tmp2, \tmp3 alternative_if ARM64_ALT_PAN_NOT_UAO SET_PSTATE_PAN(0) alternative_else_nop_endif diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index 8b168280976f..3873dd7b5a32 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -26,7 +26,6 @@ #include <asm/asm-offsets.h> #include <asm/cpufeature.h> #include <asm/debug-monitors.h> -#include <asm/mmu_context.h> #include <asm/page.h> #include <asm/pgtable-hwdef.h> #include <asm/ptrace.h> @@ -110,6 +109,13 @@ .endm /* + * RAS Error Synchronization barrier + */ + .macro esb + hint #16 + .endm + +/* * NOP sequence */ .macro nops, num @@ -255,7 +261,11 @@ lr .req x30 // link register #else adr_l \dst, \sym #endif +alternative_if_not ARM64_HAS_VIRT_HOST_EXTN mrs \tmp, tpidr_el1 +alternative_else + mrs \tmp, tpidr_el2 +alternative_endif add \dst, \dst, \tmp .endm @@ -266,7 +276,11 @@ lr .req x30 // link register */ .macro ldr_this_cpu dst, sym, tmp adr_l \dst, \sym +alternative_if_not ARM64_HAS_VIRT_HOST_EXTN mrs \tmp, tpidr_el1 +alternative_else + mrs \tmp, tpidr_el2 +alternative_endif ldr \dst, [\dst, \tmp] .endm @@ -344,10 +358,26 @@ alternative_endif * tcr_set_idmap_t0sz - update TCR.T0SZ so that we can load the ID map */ .macro tcr_set_idmap_t0sz, valreg, tmpreg -#ifndef CONFIG_ARM64_VA_BITS_48 ldr_l \tmpreg, idmap_t0sz bfi \valreg, \tmpreg, #TCR_T0SZ_OFFSET, #TCR_TxSZ_WIDTH -#endif + .endm + +/* + * tcr_compute_pa_size - set TCR.(I)PS to the highest supported + * ID_AA64MMFR0_EL1.PARange value + * + * tcr: register with the TCR_ELx value to be updated + * pos: IPS or PS bitfield position + * tmp{0,1}: temporary registers + */ + .macro tcr_compute_pa_size, tcr, pos, tmp0, tmp1 + mrs \tmp0, ID_AA64MMFR0_EL1 + // Narrow PARange to fit the PS field in TCR_ELx + ubfx \tmp0, \tmp0, #ID_AA64MMFR0_PARANGE_SHIFT, #3 + mov \tmp1, #ID_AA64MMFR0_PARANGE_MAX + cmp \tmp0, \tmp1 + csel \tmp0, \tmp1, \tmp0, hi + bfi \tcr, \tmp0, \pos, #3 .endm /* @@ -478,37 +508,18 @@ alternative_endif .endm /* - * Errata workaround prior to TTBR0_EL1 update + * Arrange a physical address in a TTBR register, taking care of 52-bit + * addresses. * - * val: TTBR value with new BADDR, preserved - * tmp0: temporary register, clobbered - * tmp1: other temporary register, clobbered + * phys: physical address, preserved + * ttbr: returns the TTBR value */ - .macro pre_ttbr0_update_workaround, val, tmp0, tmp1 -#ifdef CONFIG_QCOM_FALKOR_ERRATUM_1003 -alternative_if ARM64_WORKAROUND_QCOM_FALKOR_E1003 - mrs \tmp0, ttbr0_el1 - mov \tmp1, #FALKOR_RESERVED_ASID - bfi \tmp0, \tmp1, #48, #16 // reserved ASID + old BADDR - msr ttbr0_el1, \tmp0 - isb - bfi \tmp0, \val, #0, #48 // reserved ASID + new BADDR - msr ttbr0_el1, \tmp0 - isb -alternative_else_nop_endif -#endif - .endm - -/* - * Errata workaround post TTBR0_EL1 update. - */ - .macro post_ttbr0_update_workaround -#ifdef CONFIG_CAVIUM_ERRATUM_27456 -alternative_if ARM64_WORKAROUND_CAVIUM_27456 - ic iallu - dsb nsh - isb -alternative_else_nop_endif + .macro phys_to_ttbr, phys, ttbr +#ifdef CONFIG_ARM64_PA_BITS_52 + orr \ttbr, \phys, \phys, lsr #46 + and \ttbr, \ttbr, #TTBR_BADDR_MASK_52 +#else + mov \ttbr, \phys #endif .endm diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h index a3c7f271ad4c..c00c62e1a4a3 100644 --- a/arch/arm64/include/asm/compat.h +++ b/arch/arm64/include/asm/compat.h @@ -150,70 +150,6 @@ typedef u32 compat_old_sigset_t; typedef u32 compat_sigset_word; -typedef union compat_sigval { - compat_int_t sival_int; - compat_uptr_t sival_ptr; -} compat_sigval_t; - -typedef struct compat_siginfo { - int si_signo; - int si_errno; - int si_code; - - union { - int _pad[128/sizeof(int) - 3]; - - /* kill() */ - struct { - compat_pid_t _pid; /* sender's pid */ - __compat_uid32_t _uid; /* sender's uid */ - } _kill; - - /* POSIX.1b timers */ - struct { - compat_timer_t _tid; /* timer id */ - int _overrun; /* overrun count */ - compat_sigval_t _sigval; /* same as below */ - int _sys_private; /* not to be passed to user */ - } _timer; - - /* POSIX.1b signals */ - struct { - compat_pid_t _pid; /* sender's pid */ - __compat_uid32_t _uid; /* sender's uid */ - compat_sigval_t _sigval; - } _rt; - - /* SIGCHLD */ - struct { - compat_pid_t _pid; /* which child */ - __compat_uid32_t _uid; /* sender's uid */ - int _status; /* exit code */ - compat_clock_t _utime; - compat_clock_t _stime; - } _sigchld; - - /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ - struct { - compat_uptr_t _addr; /* faulting insn/memory ref. */ - short _addr_lsb; /* LSB of the reported address */ - } _sigfault; - - /* SIGPOLL */ - struct { - compat_long_t _band; /* POLL_IN, POLL_OUT, POLL_MSG */ - int _fd; - } _sigpoll; - - /* SIGSYS */ - struct { - compat_uptr_t _call_addr; /* calling user insn */ - int _syscall; /* triggering system call number */ - compat_uint_t _arch; /* AUDIT_ARCH_* of syscall */ - } _sigsys; - } _sifields; -} compat_siginfo_t; - #define COMPAT_OFF_T_MAX 0x7fffffff /* diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h index 2ff7c5e8efab..bb263820de13 100644 --- a/arch/arm64/include/asm/cpucaps.h +++ b/arch/arm64/include/asm/cpucaps.h @@ -41,7 +41,11 @@ #define ARM64_WORKAROUND_CAVIUM_30115 20 #define ARM64_HAS_DCPOP 21 #define ARM64_SVE 22 +#define ARM64_UNMAP_KERNEL_AT_EL0 23 +#define ARM64_HARDEN_BRANCH_PREDICTOR 24 +#define ARM64_HARDEN_BP_POST_GUEST_EXIT 25 +#define ARM64_HAS_RAS_EXTN 26 -#define ARM64_NCAPS 23 +#define ARM64_NCAPS 27 #endif /* __ASM_CPUCAPS_H */ diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index cbf08d7cbf30..be7bd19c87ec 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -79,28 +79,37 @@ #define ARM_CPU_PART_AEM_V8 0xD0F #define ARM_CPU_PART_FOUNDATION 0xD00 #define ARM_CPU_PART_CORTEX_A57 0xD07 +#define ARM_CPU_PART_CORTEX_A72 0xD08 #define ARM_CPU_PART_CORTEX_A53 0xD03 #define ARM_CPU_PART_CORTEX_A73 0xD09 +#define ARM_CPU_PART_CORTEX_A75 0xD0A #define APM_CPU_PART_POTENZA 0x000 #define CAVIUM_CPU_PART_THUNDERX 0x0A1 #define CAVIUM_CPU_PART_THUNDERX_81XX 0x0A2 #define CAVIUM_CPU_PART_THUNDERX_83XX 0x0A3 +#define CAVIUM_CPU_PART_THUNDERX2 0x0AF #define BRCM_CPU_PART_VULCAN 0x516 #define QCOM_CPU_PART_FALKOR_V1 0x800 #define QCOM_CPU_PART_FALKOR 0xC00 +#define QCOM_CPU_PART_KRYO 0x200 #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53) #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57) +#define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72) #define MIDR_CORTEX_A73 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A73) +#define MIDR_CORTEX_A75 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A75) #define MIDR_THUNDERX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX) #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX) #define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX) +#define MIDR_CAVIUM_THUNDERX2 MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX2) +#define MIDR_BRCM_VULCAN MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_VULCAN) #define MIDR_QCOM_FALKOR_V1 MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR_V1) #define MIDR_QCOM_FALKOR MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR) +#define MIDR_QCOM_KRYO MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO) #ifndef __ASSEMBLY__ diff --git a/arch/arm64/include/asm/dma-mapping.h b/arch/arm64/include/asm/dma-mapping.h index 0df756b24863..b7847eb8a7bb 100644 --- a/arch/arm64/include/asm/dma-mapping.h +++ b/arch/arm64/include/asm/dma-mapping.h @@ -50,40 +50,5 @@ static inline bool is_device_dma_coherent(struct device *dev) return dev->archdata.dma_coherent; } -static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) -{ - dma_addr_t dev_addr = (dma_addr_t)paddr; - - return dev_addr - ((dma_addr_t)dev->dma_pfn_offset << PAGE_SHIFT); -} - -static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr) -{ - phys_addr_t paddr = (phys_addr_t)dev_addr; - - return paddr + ((phys_addr_t)dev->dma_pfn_offset << PAGE_SHIFT); -} - -static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size) -{ - if (!dev->dma_mask) - return false; - - return addr + size - 1 <= *dev->dma_mask; -} - -static inline void dma_mark_clean(void *addr, size_t size) -{ -} - -/* Override for dma_max_pfn() */ -static inline unsigned long dma_max_pfn(struct device *dev) -{ - dma_addr_t dma_max = (dma_addr_t)*dev->dma_mask; - - return (ulong)dma_to_phys(dev, dma_max) >> PAGE_SHIFT; -} -#define dma_max_pfn(dev) dma_max_pfn(dev) - #endif /* __KERNEL__ */ #endif /* __ASM_DMA_MAPPING_H */ diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h index c4cd5081d78b..8389050328bb 100644 --- a/arch/arm64/include/asm/efi.h +++ b/arch/arm64/include/asm/efi.h @@ -121,19 +121,21 @@ static inline void efi_set_pgd(struct mm_struct *mm) if (mm != current->active_mm) { /* * Update the current thread's saved ttbr0 since it is - * restored as part of a return from exception. Set - * the hardware TTBR0_EL1 using cpu_switch_mm() - * directly to enable potential errata workarounds. + * restored as part of a return from exception. Enable + * access to the valid TTBR0_EL1 and invoke the errata + * workaround directly since there is no return from + * exception when invoking the EFI run-time services. */ update_saved_ttbr0(current, mm); - cpu_switch_mm(mm->pgd, mm); + uaccess_ttbr0_enable(); + post_ttbr_update_workaround(); } else { /* * Defer the switch to the current thread's TTBR0_EL1 * until uaccess_enable(). Restore the current * thread's saved ttbr0 corresponding to its active_mm */ - cpu_set_reserved_ttbr0(); + uaccess_ttbr0_disable(); update_saved_ttbr0(current, current->active_mm); } } diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h index 014d7d8edcf9..803443d74926 100644 --- a/arch/arm64/include/asm/esr.h +++ b/arch/arm64/include/asm/esr.h @@ -86,6 +86,18 @@ #define ESR_ELx_WNR_SHIFT (6) #define ESR_ELx_WNR (UL(1) << ESR_ELx_WNR_SHIFT) +/* Asynchronous Error Type */ +#define ESR_ELx_IDS_SHIFT (24) +#define ESR_ELx_IDS (UL(1) << ESR_ELx_IDS_SHIFT) +#define ESR_ELx_AET_SHIFT (10) +#define ESR_ELx_AET (UL(0x7) << ESR_ELx_AET_SHIFT) + +#define ESR_ELx_AET_UC (UL(0) << ESR_ELx_AET_SHIFT) +#define ESR_ELx_AET_UEU (UL(1) << ESR_ELx_AET_SHIFT) +#define ESR_ELx_AET_UEO (UL(2) << ESR_ELx_AET_SHIFT) +#define ESR_ELx_AET_UER (UL(3) << ESR_ELx_AET_SHIFT) +#define ESR_ELx_AET_CE (UL(6) << ESR_ELx_AET_SHIFT) + /* Shared ISS field definitions for Data/Instruction aborts */ #define ESR_ELx_SET_SHIFT (11) #define ESR_ELx_SET_MASK (UL(3) << ESR_ELx_SET_SHIFT) @@ -100,6 +112,7 @@ #define ESR_ELx_FSC (0x3F) #define ESR_ELx_FSC_TYPE (0x3C) #define ESR_ELx_FSC_EXTABT (0x10) +#define ESR_ELx_FSC_SERROR (0x11) #define ESR_ELx_FSC_ACCESS (0x08) #define ESR_ELx_FSC_FAULT (0x04) #define ESR_ELx_FSC_PERM (0x0C) @@ -127,6 +140,13 @@ #define ESR_ELx_WFx_ISS_WFE (UL(1) << 0) #define ESR_ELx_xVC_IMM_MASK ((1UL << 16) - 1) +#define DISR_EL1_IDS (UL(1) << 24) +/* + * DISR_EL1 and ESR_ELx share the bottom 13 bits, but the RES0 bits may mean + * different things in the future... + */ +#define DISR_EL1_ESR_MASK (ESR_ELx_AET | ESR_ELx_EA | ESR_ELx_FSC) + /* ESR value templates for specific events */ /* BRK instruction trap from AArch64 state */ diff --git a/arch/arm64/include/asm/exception.h b/arch/arm64/include/asm/exception.h index 0c2eec490abf..bc30429d8e91 100644 --- a/arch/arm64/include/asm/exception.h +++ b/arch/arm64/include/asm/exception.h @@ -18,6 +18,8 @@ #ifndef __ASM_EXCEPTION_H #define __ASM_EXCEPTION_H +#include <asm/esr.h> + #include <linux/interrupt.h> #define __exception __attribute__((section(".exception.text"))) @@ -27,4 +29,16 @@ #define __exception_irq_entry __exception #endif +static inline u32 disr_to_esr(u64 disr) +{ + unsigned int esr = ESR_ELx_EC_SERROR << ESR_ELx_EC_SHIFT; + + if ((disr & DISR_EL1_IDS) == 0) + esr |= (disr & DISR_EL1_ESR_MASK); + else + esr |= (disr & ESR_ELx_ISS_MASK); + + return esr; +} + #endif /* __ASM_EXCEPTION_H */ diff --git a/arch/arm64/include/asm/fixmap.h b/arch/arm64/include/asm/fixmap.h index 4052ec39e8db..ec1e6d6fa14c 100644 --- a/arch/arm64/include/asm/fixmap.h +++ b/arch/arm64/include/asm/fixmap.h @@ -58,6 +58,11 @@ enum fixed_addresses { FIX_APEI_GHES_NMI, #endif /* CONFIG_ACPI_APEI_GHES */ +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 + FIX_ENTRY_TRAMP_DATA, + FIX_ENTRY_TRAMP_TEXT, +#define TRAMP_VALIAS (__fix_to_virt(FIX_ENTRY_TRAMP_TEXT)) +#endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */ __end_of_permanent_fixed_addresses, /* diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h index 74f34392a531..8857a0f0d0f7 100644 --- a/arch/arm64/include/asm/fpsimd.h +++ b/arch/arm64/include/asm/fpsimd.h @@ -71,7 +71,7 @@ extern void fpsimd_flush_thread(void); extern void fpsimd_signal_preserve_current_state(void); extern void fpsimd_preserve_current_state(void); extern void fpsimd_restore_current_state(void); -extern void fpsimd_update_current_state(struct fpsimd_state *state); +extern void fpsimd_update_current_state(struct user_fpsimd_state const *state); extern void fpsimd_flush_task_state(struct task_struct *target); extern void sve_flush_cpu_state(void); diff --git a/arch/arm64/include/asm/kasan.h b/arch/arm64/include/asm/kasan.h index e266f80e45b7..8758bb008436 100644 --- a/arch/arm64/include/asm/kasan.h +++ b/arch/arm64/include/asm/kasan.h @@ -12,7 +12,8 @@ /* * KASAN_SHADOW_START: beginning of the kernel virtual addresses. - * KASAN_SHADOW_END: KASAN_SHADOW_START + 1/8 of kernel virtual addresses. + * KASAN_SHADOW_END: KASAN_SHADOW_START + 1/N of kernel virtual addresses, + * where N = (1 << KASAN_SHADOW_SCALE_SHIFT). */ #define KASAN_SHADOW_START (VA_START) #define KASAN_SHADOW_END (KASAN_SHADOW_START + KASAN_SHADOW_SIZE) @@ -20,14 +21,16 @@ /* * This value is used to map an address to the corresponding shadow * address by the following formula: - * shadow_addr = (address >> 3) + KASAN_SHADOW_OFFSET; + * shadow_addr = (address >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET * - * (1 << 61) shadow addresses - [KASAN_SHADOW_OFFSET,KASAN_SHADOW_END] - * cover all 64-bits of virtual addresses. So KASAN_SHADOW_OFFSET - * should satisfy the following equation: - * KASAN_SHADOW_OFFSET = KASAN_SHADOW_END - (1ULL << 61) + * (1 << (64 - KASAN_SHADOW_SCALE_SHIFT)) shadow addresses that lie in range + * [KASAN_SHADOW_OFFSET, KASAN_SHADOW_END) cover all 64-bits of virtual + * addresses. So KASAN_SHADOW_OFFSET should satisfy the following equation: + * KASAN_SHADOW_OFFSET = KASAN_SHADOW_END - + * (1ULL << (64 - KASAN_SHADOW_SCALE_SHIFT)) */ -#define KASAN_SHADOW_OFFSET (KASAN_SHADOW_END - (1ULL << (64 - 3))) +#define KASAN_SHADOW_OFFSET (KASAN_SHADOW_END - (1ULL << \ + (64 - KASAN_SHADOW_SCALE_SHIFT))) void kasan_init(void); void kasan_copy_shadow(pgd_t *pgdir); diff --git a/arch/arm64/include/asm/kernel-pgtable.h b/arch/arm64/include/asm/kernel-pgtable.h index 7803343e5881..82386e860dd2 100644 --- a/arch/arm64/include/asm/kernel-pgtable.h +++ b/arch/arm64/include/asm/kernel-pgtable.h @@ -52,7 +52,52 @@ #define IDMAP_PGTABLE_LEVELS (ARM64_HW_PGTABLE_LEVELS(PHYS_MASK_SHIFT)) #endif -#define SWAPPER_DIR_SIZE (SWAPPER_PGTABLE_LEVELS * PAGE_SIZE) + +/* + * If KASLR is enabled, then an offset K is added to the kernel address + * space. The bottom 21 bits of this offset are zero to guarantee 2MB + * alignment for PA and VA. + * + * For each pagetable level of the swapper, we know that the shift will + * be larger than 21 (for the 4KB granule case we use section maps thus + * the smallest shift is actually 30) thus there is the possibility that + * KASLR can increase the number of pagetable entries by 1, so we make + * room for this extra entry. + * + * Note KASLR cannot increase the number of required entries for a level + * by more than one because it increments both the virtual start and end + * addresses equally (the extra entry comes from the case where the end + * address is just pushed over a boundary and the start address isn't). + */ + +#ifdef CONFIG_RANDOMIZE_BASE +#define EARLY_KASLR (1) +#else +#define EARLY_KASLR (0) +#endif + +#define EARLY_ENTRIES(vstart, vend, shift) (((vend) >> (shift)) \ + - ((vstart) >> (shift)) + 1 + EARLY_KASLR) + +#define EARLY_PGDS(vstart, vend) (EARLY_ENTRIES(vstart, vend, PGDIR_SHIFT)) + +#if SWAPPER_PGTABLE_LEVELS > 3 +#define EARLY_PUDS(vstart, vend) (EARLY_ENTRIES(vstart, vend, PUD_SHIFT)) +#else +#define EARLY_PUDS(vstart, vend) (0) +#endif + +#if SWAPPER_PGTABLE_LEVELS > 2 +#define EARLY_PMDS(vstart, vend) (EARLY_ENTRIES(vstart, vend, SWAPPER_TABLE_SHIFT)) +#else +#define EARLY_PMDS(vstart, vend) (0) +#endif + +#define EARLY_PAGES(vstart, vend) ( 1 /* PGDIR page */ \ + + EARLY_PGDS((vstart), (vend)) /* each PGDIR needs a next level page table */ \ + + EARLY_PUDS((vstart), (vend)) /* each PUD needs a next level page table */ \ + + EARLY_PMDS((vstart), (vend))) /* each PMD needs a next level page table */ +#define SWAPPER_DIR_SIZE (PAGE_SIZE * EARLY_PAGES(KIMAGE_VADDR + TEXT_OFFSET, _end)) #define IDMAP_DIR_SIZE (IDMAP_PGTABLE_LEVELS * PAGE_SIZE) #ifdef CONFIG_ARM64_SW_TTBR0_PAN @@ -78,8 +123,16 @@ /* * Initial memory map attributes. */ -#define SWAPPER_PTE_FLAGS (PTE_TYPE_PAGE | PTE_AF | PTE_SHARED) -#define SWAPPER_PMD_FLAGS (PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S) +#define _SWAPPER_PTE_FLAGS (PTE_TYPE_PAGE | PTE_AF | PTE_SHARED) +#define _SWAPPER_PMD_FLAGS (PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S) + +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 +#define SWAPPER_PTE_FLAGS (_SWAPPER_PTE_FLAGS | PTE_NG) +#define SWAPPER_PMD_FLAGS (_SWAPPER_PMD_FLAGS | PMD_SECT_NG) +#else +#define SWAPPER_PTE_FLAGS _SWAPPER_PTE_FLAGS +#define SWAPPER_PMD_FLAGS _SWAPPER_PMD_FLAGS +#endif #if ARM64_SWAPPER_USES_SECTION_MAPS #define SWAPPER_MM_MMUFLAGS (PMD_ATTRINDX(MT_NORMAL) | SWAPPER_PMD_FLAGS) diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index 715d395ef45b..b0c84171e6a3 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -23,6 +23,8 @@ #include <asm/types.h> /* Hyp Configuration Register (HCR) bits */ +#define HCR_TEA (UL(1) << 37) +#define HCR_TERR (UL(1) << 36) #define HCR_E2H (UL(1) << 34) #define HCR_ID (UL(1) << 33) #define HCR_CD (UL(1) << 32) diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h index ab4d0a926043..24961b732e65 100644 --- a/arch/arm64/include/asm/kvm_asm.h +++ b/arch/arm64/include/asm/kvm_asm.h @@ -68,6 +68,8 @@ extern u32 __kvm_get_mdcr_el2(void); extern u32 __init_stage2_translation(void); +extern void __qcom_hyp_sanitize_btac_predictors(void); + #endif #endif /* __ARM_KVM_ASM_H__ */ diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h index 5f28dfa14cee..413dc82b1e89 100644 --- a/arch/arm64/include/asm/kvm_emulate.h +++ b/arch/arm64/include/asm/kvm_emulate.h @@ -50,6 +50,13 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu) vcpu->arch.hcr_el2 = HCR_GUEST_FLAGS; if (is_kernel_in_hyp_mode()) vcpu->arch.hcr_el2 |= HCR_E2H; + if (cpus_have_const_cap(ARM64_HAS_RAS_EXTN)) { + /* route synchronous external abort exceptions to EL2 */ + vcpu->arch.hcr_el2 |= HCR_TEA; + /* trap error record accesses */ + vcpu->arch.hcr_el2 |= HCR_TERR; + } + if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features)) vcpu->arch.hcr_el2 &= ~HCR_RW; } @@ -64,6 +71,11 @@ static inline void vcpu_set_hcr(struct kvm_vcpu *vcpu, unsigned long hcr) vcpu->arch.hcr_el2 = hcr; } +static inline void vcpu_set_vsesr(struct kvm_vcpu *vcpu, u64 vsesr) +{ + vcpu->arch.vsesr_el2 = vsesr; +} + static inline unsigned long *vcpu_pc(const struct kvm_vcpu *vcpu) { return (unsigned long *)&vcpu_gp_regs(vcpu)->regs.pc; @@ -171,6 +183,11 @@ static inline phys_addr_t kvm_vcpu_get_fault_ipa(const struct kvm_vcpu *vcpu) return ((phys_addr_t)vcpu->arch.fault.hpfar_el2 & HPFAR_MASK) << 8; } +static inline u64 kvm_vcpu_get_disr(const struct kvm_vcpu *vcpu) +{ + return vcpu->arch.fault.disr_el1; +} + static inline u32 kvm_vcpu_hvc_get_imm(const struct kvm_vcpu *vcpu) { return kvm_vcpu_get_hsr(vcpu) & ESR_ELx_xVC_IMM_MASK; diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index ea6cb5b24258..4485ae8e98de 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -25,6 +25,7 @@ #include <linux/types.h> #include <linux/kvm_types.h> #include <asm/cpufeature.h> +#include <asm/daifflags.h> #include <asm/fpsimd.h> #include <asm/kvm.h> #include <asm/kvm_asm.h> @@ -89,6 +90,7 @@ struct kvm_vcpu_fault_info { u32 esr_el2; /* Hyp Syndrom Register */ u64 far_el2; /* Hyp Fault Address Register */ u64 hpfar_el2; /* Hyp IPA Fault Address Register */ + u64 disr_el1; /* Deferred [SError] Status Register */ }; /* @@ -120,6 +122,7 @@ enum vcpu_sysreg { PAR_EL1, /* Physical Address Register */ MDSCR_EL1, /* Monitor Debug System Control Register */ MDCCINT_EL1, /* Monitor Debug Comms Channel Interrupt Enable Reg */ + DISR_EL1, /* Deferred Interrupt Status Register */ /* Performance Monitors Registers */ PMCR_EL0, /* Control Register */ @@ -192,6 +195,8 @@ struct kvm_cpu_context { u64 sys_regs[NR_SYS_REGS]; u32 copro[NR_COPRO_REGS]; }; + + struct kvm_vcpu *__hyp_running_vcpu; }; typedef struct kvm_cpu_context kvm_cpu_context_t; @@ -277,6 +282,9 @@ struct kvm_vcpu_arch { /* Detect first run of a vcpu */ bool has_run_once; + + /* Virtual SError ESR to restore when HCR_EL2.VSE is set */ + u64 vsesr_el2; }; #define vcpu_gp_regs(v) (&(v)->arch.ctxt.gp_regs) @@ -340,6 +348,8 @@ void kvm_mmu_wp_memory_region(struct kvm *kvm, int slot); int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, int exception_index); +void handle_exit_early(struct kvm_vcpu *vcpu, struct kvm_run *run, + int exception_index); int kvm_perf_init(void); int kvm_perf_teardown(void); @@ -396,4 +406,13 @@ static inline void kvm_fpsimd_flush_cpu_state(void) sve_flush_cpu_state(); } +static inline void kvm_arm_vhe_guest_enter(void) +{ + local_daif_mask(); +} + +static inline void kvm_arm_vhe_guest_exit(void) +{ + local_daif_restore(DAIF_PROCCTX_NOIRQ); +} #endif /* __ARM64_KVM_HOST_H__ */ diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h index 672c8684d5c2..72e279dbae5f 100644 --- a/arch/arm64/include/asm/kvm_mmu.h +++ b/arch/arm64/include/asm/kvm_mmu.h @@ -273,15 +273,26 @@ void kvm_toggle_cache(struct kvm_vcpu *vcpu, bool was_enabled); static inline bool __kvm_cpu_uses_extended_idmap(void) { - return __cpu_uses_extended_idmap(); + return __cpu_uses_extended_idmap_level(); } +static inline unsigned long __kvm_idmap_ptrs_per_pgd(void) +{ + return idmap_ptrs_per_pgd; +} + +/* + * Can't use pgd_populate here, because the extended idmap adds an extra level + * above CONFIG_PGTABLE_LEVELS (which is 2 or 3 if we're using the extended + * idmap), and pgd_populate is only available if CONFIG_PGTABLE_LEVELS = 4. + */ static inline void __kvm_extend_hypmap(pgd_t *boot_hyp_pgd, pgd_t *hyp_pgd, pgd_t *merged_hyp_pgd, unsigned long hyp_idmap_start) { int idmap_idx; + u64 pgd_addr; /* * Use the first entry to access the HYP mappings. It is @@ -289,7 +300,8 @@ static inline void __kvm_extend_hypmap(pgd_t *boot_hyp_pgd, * extended idmap. */ VM_BUG_ON(pgd_val(merged_hyp_pgd[0])); - merged_hyp_pgd[0] = __pgd(__pa(hyp_pgd) | PMD_TYPE_TABLE); + pgd_addr = __phys_to_pgd_val(__pa(hyp_pgd)); + merged_hyp_pgd[0] = __pgd(pgd_addr | PMD_TYPE_TABLE); /* * Create another extended level entry that points to the boot HYP map, @@ -299,7 +311,8 @@ static inline void __kvm_extend_hypmap(pgd_t *boot_hyp_pgd, */ idmap_idx = hyp_idmap_start >> VA_BITS; VM_BUG_ON(pgd_val(merged_hyp_pgd[idmap_idx])); - merged_hyp_pgd[idmap_idx] = __pgd(__pa(boot_hyp_pgd) | PMD_TYPE_TABLE); + pgd_addr = __phys_to_pgd_val(__pa(boot_hyp_pgd)); + merged_hyp_pgd[idmap_idx] = __pgd(pgd_addr | PMD_TYPE_TABLE); } static inline unsigned int kvm_get_vmid_bits(void) @@ -309,5 +322,45 @@ static inline unsigned int kvm_get_vmid_bits(void) return (cpuid_feature_extract_unsigned_field(reg, ID_AA64MMFR1_VMIDBITS_SHIFT) == 2) ? 16 : 8; } +#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR +#include <asm/mmu.h> + +static inline void *kvm_get_hyp_vector(void) +{ + struct bp_hardening_data *data = arm64_get_bp_hardening_data(); + void *vect = kvm_ksym_ref(__kvm_hyp_vector); + + if (data->fn) { + vect = __bp_harden_hyp_vecs_start + + data->hyp_vectors_slot * SZ_2K; + + if (!has_vhe()) + vect = lm_alias(vect); + } + + return vect; +} + +static inline int kvm_map_vectors(void) +{ + return create_hyp_mappings(kvm_ksym_ref(__bp_harden_hyp_vecs_start), + kvm_ksym_ref(__bp_harden_hyp_vecs_end), + PAGE_HYP_EXEC); +} + +#else +static inline void *kvm_get_hyp_vector(void) +{ + return kvm_ksym_ref(__kvm_hyp_vector); +} + +static inline int kvm_map_vectors(void) +{ + return 0; +} +#endif + +#define kvm_phys_to_vttbr(addr) phys_to_ttbr(addr) + #endif /* __ASSEMBLY__ */ #endif /* __ARM64_KVM_MMU_H__ */ diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index d4bae7d6e0d8..50fa96a49792 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -85,7 +85,8 @@ * stack size when KASAN is in use. */ #ifdef CONFIG_KASAN -#define KASAN_SHADOW_SIZE (UL(1) << (VA_BITS - 3)) +#define KASAN_SHADOW_SCALE_SHIFT 3 +#define KASAN_SHADOW_SIZE (UL(1) << (VA_BITS - KASAN_SHADOW_SCALE_SHIFT)) #define KASAN_THREAD_SHIFT 1 #else #define KASAN_SHADOW_SIZE (0) diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h index 0d34bf0a89c7..a050d4f3615d 100644 --- a/arch/arm64/include/asm/mmu.h +++ b/arch/arm64/include/asm/mmu.h @@ -17,6 +17,11 @@ #define __ASM_MMU_H #define MMCF_AARCH32 0x1 /* mm context flag for AArch32 executables */ +#define USER_ASID_BIT 48 +#define USER_ASID_FLAG (UL(1) << USER_ASID_BIT) +#define TTBR_ASID_MASK (UL(0xffff) << 48) + +#ifndef __ASSEMBLY__ typedef struct { atomic64_t id; @@ -31,6 +36,49 @@ typedef struct { */ #define ASID(mm) ((mm)->context.id.counter & 0xffff) +static inline bool arm64_kernel_unmapped_at_el0(void) +{ + return IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0) && + cpus_have_const_cap(ARM64_UNMAP_KERNEL_AT_EL0); +} + +typedef void (*bp_hardening_cb_t)(void); + +struct bp_hardening_data { + int hyp_vectors_slot; + bp_hardening_cb_t fn; +}; + +#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR +extern char __bp_harden_hyp_vecs_start[], __bp_harden_hyp_vecs_end[]; + +DECLARE_PER_CPU_READ_MOSTLY(struct bp_hardening_data, bp_hardening_data); + +static inline struct bp_hardening_data *arm64_get_bp_hardening_data(void) +{ + return this_cpu_ptr(&bp_hardening_data); +} + +static inline void arm64_apply_bp_hardening(void) +{ + struct bp_hardening_data *d; + + if (!cpus_have_const_cap(ARM64_HARDEN_BRANCH_PREDICTOR)) + return; + + d = arm64_get_bp_hardening_data(); + if (d->fn) + d->fn(); +} +#else +static inline struct bp_hardening_data *arm64_get_bp_hardening_data(void) +{ + return NULL; +} + +static inline void arm64_apply_bp_hardening(void) { } +#endif /* CONFIG_HARDEN_BRANCH_PREDICTOR */ + extern void paging_init(void); extern void bootmem_init(void); extern void __iomem *early_io_map(phys_addr_t phys, unsigned long virt); @@ -41,4 +89,5 @@ extern void create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys, extern void *fixmap_remap_fdt(phys_addr_t dt_phys); extern void mark_linear_text_alias_ro(void); +#endif /* !__ASSEMBLY__ */ #endif diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h index 9d155fa9a507..8d3331985d2e 100644 --- a/arch/arm64/include/asm/mmu_context.h +++ b/arch/arm64/include/asm/mmu_context.h @@ -19,8 +19,6 @@ #ifndef __ASM_MMU_CONTEXT_H #define __ASM_MMU_CONTEXT_H -#define FALKOR_RESERVED_ASID 1 - #ifndef __ASSEMBLY__ #include <linux/compiler.h> @@ -51,23 +49,39 @@ static inline void contextidr_thread_switch(struct task_struct *next) */ static inline void cpu_set_reserved_ttbr0(void) { - unsigned long ttbr = __pa_symbol(empty_zero_page); + unsigned long ttbr = phys_to_ttbr(__pa_symbol(empty_zero_page)); write_sysreg(ttbr, ttbr0_el1); isb(); } +static inline void cpu_switch_mm(pgd_t *pgd, struct mm_struct *mm) +{ + BUG_ON(pgd == swapper_pg_dir); + cpu_set_reserved_ttbr0(); + cpu_do_switch_mm(virt_to_phys(pgd),mm); +} + /* * TCR.T0SZ value to use when the ID map is active. Usually equals * TCR_T0SZ(VA_BITS), unless system RAM is positioned very high in * physical memory, in which case it will be smaller. */ extern u64 idmap_t0sz; +extern u64 idmap_ptrs_per_pgd; static inline bool __cpu_uses_extended_idmap(void) { - return (!IS_ENABLED(CONFIG_ARM64_VA_BITS_48) && - unlikely(idmap_t0sz != TCR_T0SZ(VA_BITS))); + return unlikely(idmap_t0sz != TCR_T0SZ(VA_BITS)); +} + +/* + * True if the extended ID map requires an extra level of translation table + * to be configured. + */ +static inline bool __cpu_uses_extended_idmap_level(void) +{ + return ARM64_HW_PGTABLE_LEVELS(64 - idmap_t0sz) > CONFIG_PGTABLE_LEVELS; } /* @@ -170,7 +184,7 @@ static inline void update_saved_ttbr0(struct task_struct *tsk, else ttbr = virt_to_phys(mm->pgd) | ASID(mm) << 48; - task_thread_info(tsk)->ttbr0 = ttbr; + WRITE_ONCE(task_thread_info(tsk)->ttbr0, ttbr); } #else static inline void update_saved_ttbr0(struct task_struct *tsk, @@ -225,6 +239,7 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next, #define activate_mm(prev,next) switch_mm(prev, next, current) void verify_cpu_asid_bits(void); +void post_ttbr_update_workaround(void); #endif /* !__ASSEMBLY__ */ diff --git a/arch/arm64/include/asm/percpu.h b/arch/arm64/include/asm/percpu.h index 3bd498e4de4c..43393208229e 100644 --- a/arch/arm64/include/asm/percpu.h +++ b/arch/arm64/include/asm/percpu.h @@ -16,11 +16,15 @@ #ifndef __ASM_PERCPU_H #define __ASM_PERCPU_H +#include <asm/alternative.h> #include <asm/stack_pointer.h> static inline void set_my_cpu_offset(unsigned long off) { - asm volatile("msr tpidr_el1, %0" :: "r" (off) : "memory"); + asm volatile(ALTERNATIVE("msr tpidr_el1, %0", + "msr tpidr_el2, %0", + ARM64_HAS_VIRT_HOST_EXTN) + :: "r" (off) : "memory"); } static inline unsigned long __my_cpu_offset(void) @@ -31,7 +35,10 @@ static inline unsigned long __my_cpu_offset(void) * We want to allow caching the value, so avoid using volatile and * instead use a fake stack read to hazard against barrier(). */ - asm("mrs %0, tpidr_el1" : "=r" (off) : + asm(ALTERNATIVE("mrs %0, tpidr_el1", + "mrs %0, tpidr_el2", + ARM64_HAS_VIRT_HOST_EXTN) + : "=r" (off) : "Q" (*(const unsigned long *)current_stack_pointer)); return off; diff --git a/arch/arm64/include/asm/pgalloc.h b/arch/arm64/include/asm/pgalloc.h index 5ca6a573a701..e9d9f1b006ef 100644 --- a/arch/arm64/include/asm/pgalloc.h +++ b/arch/arm64/include/asm/pgalloc.h @@ -44,7 +44,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) static inline void __pud_populate(pud_t *pud, phys_addr_t pmd, pudval_t prot) { - set_pud(pud, __pud(pmd | prot)); + set_pud(pud, __pud(__phys_to_pud_val(pmd) | prot)); } static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) @@ -73,7 +73,7 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud) static inline void __pgd_populate(pgd_t *pgdp, phys_addr_t pud, pgdval_t prot) { - set_pgd(pgdp, __pgd(pud | prot)); + set_pgd(pgdp, __pgd(__phys_to_pgd_val(pud) | prot)); } static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud) @@ -129,7 +129,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) static inline void __pmd_populate(pmd_t *pmdp, phys_addr_t pte, pmdval_t prot) { - set_pmd(pmdp, __pmd(pte | prot)); + set_pmd(pmdp, __pmd(__phys_to_pmd_val(pte) | prot)); } /* diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h index eb0c2bd90de9..f42836da8723 100644 --- a/arch/arm64/include/asm/pgtable-hwdef.h +++ b/arch/arm64/include/asm/pgtable-hwdef.h @@ -16,6 +16,8 @@ #ifndef __ASM_PGTABLE_HWDEF_H #define __ASM_PGTABLE_HWDEF_H +#include <asm/memory.h> + /* * Number of page-table levels required to address 'va_bits' wide * address, without section mapping. We resolve the top (va_bits - PAGE_SHIFT) @@ -116,9 +118,9 @@ * Level 1 descriptor (PUD). */ #define PUD_TYPE_TABLE (_AT(pudval_t, 3) << 0) -#define PUD_TABLE_BIT (_AT(pgdval_t, 1) << 1) -#define PUD_TYPE_MASK (_AT(pgdval_t, 3) << 0) -#define PUD_TYPE_SECT (_AT(pgdval_t, 1) << 0) +#define PUD_TABLE_BIT (_AT(pudval_t, 1) << 1) +#define PUD_TYPE_MASK (_AT(pudval_t, 3) << 0) +#define PUD_TYPE_SECT (_AT(pudval_t, 1) << 0) /* * Level 2 descriptor (PMD). @@ -166,6 +168,14 @@ #define PTE_UXN (_AT(pteval_t, 1) << 54) /* User XN */ #define PTE_HYP_XN (_AT(pteval_t, 1) << 54) /* HYP XN */ +#define PTE_ADDR_LOW (((_AT(pteval_t, 1) << (48 - PAGE_SHIFT)) - 1) << PAGE_SHIFT) +#ifdef CONFIG_ARM64_PA_BITS_52 +#define PTE_ADDR_HIGH (_AT(pteval_t, 0xf) << 12) +#define PTE_ADDR_MASK (PTE_ADDR_LOW | PTE_ADDR_HIGH) +#else +#define PTE_ADDR_MASK PTE_ADDR_LOW +#endif + /* * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers). */ @@ -196,7 +206,7 @@ /* * Highest possible physical address supported. */ -#define PHYS_MASK_SHIFT (48) +#define PHYS_MASK_SHIFT (CONFIG_ARM64_PA_BITS) #define PHYS_MASK ((UL(1) << PHYS_MASK_SHIFT) - 1) /* @@ -272,9 +282,23 @@ #define TCR_TG1_4K (UL(2) << TCR_TG1_SHIFT) #define TCR_TG1_64K (UL(3) << TCR_TG1_SHIFT) +#define TCR_IPS_SHIFT 32 +#define TCR_IPS_MASK (UL(7) << TCR_IPS_SHIFT) +#define TCR_A1 (UL(1) << 22) #define TCR_ASID16 (UL(1) << 36) #define TCR_TBI0 (UL(1) << 37) #define TCR_HA (UL(1) << 39) #define TCR_HD (UL(1) << 40) +/* + * TTBR. + */ +#ifdef CONFIG_ARM64_PA_BITS_52 +/* + * This should be GENMASK_ULL(47, 2). + * TTBR_ELx[1] is RES0 in this configuration. + */ +#define TTBR_BADDR_MASK_52 (((UL(1) << 46) - 1) << 2) +#endif + #endif diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h index 0a5635fb0ef9..22a926825e3f 100644 --- a/arch/arm64/include/asm/pgtable-prot.h +++ b/arch/arm64/include/asm/pgtable-prot.h @@ -34,8 +34,16 @@ #include <asm/pgtable-types.h> -#define PROT_DEFAULT (PTE_TYPE_PAGE | PTE_AF | PTE_SHARED) -#define PROT_SECT_DEFAULT (PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S) +#define _PROT_DEFAULT (PTE_TYPE_PAGE | PTE_AF | PTE_SHARED) +#define _PROT_SECT_DEFAULT (PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S) + +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 +#define PROT_DEFAULT (_PROT_DEFAULT | PTE_NG) +#define PROT_SECT_DEFAULT (_PROT_SECT_DEFAULT | PMD_SECT_NG) +#else +#define PROT_DEFAULT _PROT_DEFAULT +#define PROT_SECT_DEFAULT _PROT_SECT_DEFAULT +#endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */ #define PROT_DEVICE_nGnRnE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRnE)) #define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRE)) @@ -48,6 +56,7 @@ #define PROT_SECT_NORMAL_EXEC (PROT_SECT_DEFAULT | PMD_SECT_UXN | PMD_ATTRINDX(MT_NORMAL)) #define _PAGE_DEFAULT (PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL)) +#define _HYP_PAGE_DEFAULT (_PAGE_DEFAULT & ~PTE_NG) #define PAGE_KERNEL __pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE) #define PAGE_KERNEL_RO __pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_RDONLY) @@ -55,15 +64,15 @@ #define PAGE_KERNEL_EXEC __pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE) #define PAGE_KERNEL_EXEC_CONT __pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_CONT) -#define PAGE_HYP __pgprot(_PAGE_DEFAULT | PTE_HYP | PTE_HYP_XN) -#define PAGE_HYP_EXEC __pgprot(_PAGE_DEFAULT | PTE_HYP | PTE_RDONLY) -#define PAGE_HYP_RO __pgprot(_PAGE_DEFAULT | PTE_HYP | PTE_RDONLY | PTE_HYP_XN) +#define PAGE_HYP __pgprot(_HYP_PAGE_DEFAULT | PTE_HYP | PTE_HYP_XN) +#define PAGE_HYP_EXEC __pgprot(_HYP_PAGE_DEFAULT | PTE_HYP | PTE_RDONLY) +#define PAGE_HYP_RO __pgprot(_HYP_PAGE_DEFAULT | PTE_HYP | PTE_RDONLY | PTE_HYP_XN) #define PAGE_HYP_DEVICE __pgprot(PROT_DEVICE_nGnRE | PTE_HYP) #define PAGE_S2 __pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_NORMAL) | PTE_S2_RDONLY) #define PAGE_S2_DEVICE __pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_DEVICE_nGnRE) | PTE_S2_RDONLY | PTE_UXN) -#define PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_VALID) | PTE_PROT_NONE | PTE_RDONLY | PTE_PXN | PTE_UXN) +#define PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_VALID) | PTE_PROT_NONE | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN) #define PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE) #define PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_WRITE) #define PAGE_READONLY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index bdcc7f1c9d06..094374c82db0 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -59,9 +59,22 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte_val(pte)) -#define pte_pfn(pte) ((pte_val(pte) & PHYS_MASK) >> PAGE_SHIFT) +/* + * Macros to convert between a physical address and its placement in a + * page table entry, taking care of 52-bit addresses. + */ +#ifdef CONFIG_ARM64_PA_BITS_52 +#define __pte_to_phys(pte) \ + ((pte_val(pte) & PTE_ADDR_LOW) | ((pte_val(pte) & PTE_ADDR_HIGH) << 36)) +#define __phys_to_pte_val(phys) (((phys) | ((phys) >> 36)) & PTE_ADDR_MASK) +#else +#define __pte_to_phys(pte) (pte_val(pte) & PTE_ADDR_MASK) +#define __phys_to_pte_val(phys) (phys) +#endif -#define pfn_pte(pfn,prot) (__pte(((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))) +#define pte_pfn(pte) (__pte_to_phys(pte) >> PAGE_SHIFT) +#define pfn_pte(pfn,prot) \ + __pte(__phys_to_pte_val((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) #define pte_none(pte) (!pte_val(pte)) #define pte_clear(mm,addr,ptep) set_pte(ptep, __pte(0)) @@ -292,6 +305,11 @@ static inline int pte_same(pte_t pte_a, pte_t pte_b) #define __HAVE_ARCH_PTE_SPECIAL +static inline pte_t pgd_pte(pgd_t pgd) +{ + return __pte(pgd_val(pgd)); +} + static inline pte_t pud_pte(pud_t pud) { return __pte(pud_val(pud)); @@ -357,15 +375,24 @@ static inline int pmd_protnone(pmd_t pmd) #define pmd_mkhuge(pmd) (__pmd(pmd_val(pmd) & ~PMD_TABLE_BIT)) -#define pmd_pfn(pmd) (((pmd_val(pmd) & PMD_MASK) & PHYS_MASK) >> PAGE_SHIFT) -#define pfn_pmd(pfn,prot) (__pmd(((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))) +#define __pmd_to_phys(pmd) __pte_to_phys(pmd_pte(pmd)) +#define __phys_to_pmd_val(phys) __phys_to_pte_val(phys) +#define pmd_pfn(pmd) ((__pmd_to_phys(pmd) & PMD_MASK) >> PAGE_SHIFT) +#define pfn_pmd(pfn,prot) __pmd(__phys_to_pmd_val((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) #define mk_pmd(page,prot) pfn_pmd(page_to_pfn(page),prot) #define pud_write(pud) pte_write(pud_pte(pud)) -#define pud_pfn(pud) (((pud_val(pud) & PUD_MASK) & PHYS_MASK) >> PAGE_SHIFT) + +#define __pud_to_phys(pud) __pte_to_phys(pud_pte(pud)) +#define __phys_to_pud_val(phys) __phys_to_pte_val(phys) +#define pud_pfn(pud) ((__pud_to_phys(pud) & PUD_MASK) >> PAGE_SHIFT) +#define pfn_pud(pfn,prot) __pud(__phys_to_pud_val((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) #define set_pmd_at(mm, addr, pmdp, pmd) set_pte_at(mm, addr, (pte_t *)pmdp, pmd_pte(pmd)) +#define __pgd_to_phys(pgd) __pte_to_phys(pgd_pte(pgd)) +#define __phys_to_pgd_val(phys) __phys_to_pte_val(phys) + #define __pgprot_modify(prot,mask,bits) \ __pgprot((pgprot_val(prot) & ~(mask)) | (bits)) @@ -416,7 +443,7 @@ static inline void pmd_clear(pmd_t *pmdp) static inline phys_addr_t pmd_page_paddr(pmd_t pmd) { - return pmd_val(pmd) & PHYS_MASK & (s32)PAGE_MASK; + return __pmd_to_phys(pmd); } /* Find an entry in the third-level page table. */ @@ -434,7 +461,7 @@ static inline phys_addr_t pmd_page_paddr(pmd_t pmd) #define pte_set_fixmap_offset(pmd, addr) pte_set_fixmap(pte_offset_phys(pmd, addr)) #define pte_clear_fixmap() clear_fixmap(FIX_PTE) -#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK)) +#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(__pmd_to_phys(pmd))) /* use ONLY for statically allocated translation tables */ #define pte_offset_kimg(dir,addr) ((pte_t *)__phys_to_kimg(pte_offset_phys((dir), (addr)))) @@ -467,7 +494,7 @@ static inline void pud_clear(pud_t *pudp) static inline phys_addr_t pud_page_paddr(pud_t pud) { - return pud_val(pud) & PHYS_MASK & (s32)PAGE_MASK; + return __pud_to_phys(pud); } /* Find an entry in the second-level page table. */ @@ -480,7 +507,7 @@ static inline phys_addr_t pud_page_paddr(pud_t pud) #define pmd_set_fixmap_offset(pud, addr) pmd_set_fixmap(pmd_offset_phys(pud, addr)) #define pmd_clear_fixmap() clear_fixmap(FIX_PMD) -#define pud_page(pud) pfn_to_page(__phys_to_pfn(pud_val(pud) & PHYS_MASK)) +#define pud_page(pud) pfn_to_page(__phys_to_pfn(__pud_to_phys(pud))) /* use ONLY for statically allocated translation tables */ #define pmd_offset_kimg(dir,addr) ((pmd_t *)__phys_to_kimg(pmd_offset_phys((dir), (addr)))) @@ -519,7 +546,7 @@ static inline void pgd_clear(pgd_t *pgdp) static inline phys_addr_t pgd_page_paddr(pgd_t pgd) { - return pgd_val(pgd) & PHYS_MASK & (s32)PAGE_MASK; + return __pgd_to_phys(pgd); } /* Find an entry in the frst-level page table. */ @@ -532,7 +559,7 @@ static inline phys_addr_t pgd_page_paddr(pgd_t pgd) #define pud_set_fixmap_offset(pgd, addr) pud_set_fixmap(pud_offset_phys(pgd, addr)) #define pud_clear_fixmap() clear_fixmap(FIX_PUD) -#define pgd_page(pgd) pfn_to_page(__phys_to_pfn(pgd_val(pgd) & PHYS_MASK)) +#define pgd_page(pgd) pfn_to_page(__phys_to_pfn(__pgd_to_phys(pgd))) /* use ONLY for statically allocated translation tables */ #define pud_offset_kimg(dir,addr) ((pud_t *)__phys_to_kimg(pud_offset_phys((dir), (addr)))) @@ -679,10 +706,19 @@ static inline void pmdp_set_wrprotect(struct mm_struct *mm, { ptep_set_wrprotect(mm, address, (pte_t *)pmdp); } + +#define pmdp_establish pmdp_establish +static inline pmd_t pmdp_establish(struct vm_area_struct *vma, + unsigned long address, pmd_t *pmdp, pmd_t pmd) +{ + return __pmd(xchg_relaxed(&pmd_val(*pmdp), pmd_val(pmd))); +} #endif extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; +extern pgd_t swapper_pg_end[]; extern pgd_t idmap_pg_dir[PTRS_PER_PGD]; +extern pgd_t tramp_pg_dir[PTRS_PER_PGD]; /* * Encode and decode a swap entry: @@ -736,6 +772,12 @@ static inline void update_mmu_cache(struct vm_area_struct *vma, #define kc_vaddr_to_offset(v) ((v) & ~VA_START) #define kc_offset_to_vaddr(o) ((o) | VA_START) +#ifdef CONFIG_ARM64_PA_BITS_52 +#define phys_to_ttbr(addr) (((addr) | ((addr) >> 46)) & TTBR_BADDR_MASK_52) +#else +#define phys_to_ttbr(addr) (addr) +#endif + #endif /* !__ASSEMBLY__ */ #endif /* __ASM_PGTABLE_H */ diff --git a/arch/arm64/include/asm/proc-fns.h b/arch/arm64/include/asm/proc-fns.h index 14ad6e4e87d1..16cef2e8449e 100644 --- a/arch/arm64/include/asm/proc-fns.h +++ b/arch/arm64/include/asm/proc-fns.h @@ -35,12 +35,6 @@ extern u64 cpu_do_resume(phys_addr_t ptr, u64 idmap_ttbr); #include <asm/memory.h> -#define cpu_switch_mm(pgd,mm) \ -do { \ - BUG_ON(pgd == swapper_pg_dir); \ - cpu_do_switch_mm(virt_to_phys(pgd),mm); \ -} while (0) - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* __ASM_PROCFNS_H */ diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index 023cacb946c3..6db43ebd648d 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -113,6 +113,16 @@ struct thread_struct { struct debug_info debug; /* debugging */ }; +/* + * Everything usercopied to/from thread_struct is statically-sized, so + * no hardened usercopy whitelist is needed. + */ +static inline void arch_thread_struct_whitelist(unsigned long *offset, + unsigned long *size) +{ + *offset = *size = 0; +} + #ifdef CONFIG_COMPAT #define task_user_tls(t) \ ({ \ @@ -216,6 +226,7 @@ static inline void spin_lock_prefetch(const void *ptr) int cpu_enable_pan(void *__unused); int cpu_enable_cache_maint_trap(void *__unused); +int cpu_clear_disr(void *__unused); /* Userspace interface for PR_SVE_{SET,GET}_VL prctl()s: */ #define SVE_SET_VL(arg) sve_set_current_vl(arg) diff --git a/arch/arm64/include/asm/sdei.h b/arch/arm64/include/asm/sdei.h new file mode 100644 index 000000000000..e073e6886685 --- /dev/null +++ b/arch/arm64/include/asm/sdei.h @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2017 Arm Ltd. +#ifndef __ASM_SDEI_H +#define __ASM_SDEI_H + +/* Values for sdei_exit_mode */ +#define SDEI_EXIT_HVC 0 +#define SDEI_EXIT_SMC 1 + +#define SDEI_STACK_SIZE IRQ_STACK_SIZE + +#ifndef __ASSEMBLY__ + +#include <linux/linkage.h> +#include <linux/preempt.h> +#include <linux/types.h> + +#include <asm/virt.h> + +extern unsigned long sdei_exit_mode; + +/* Software Delegated Exception entry point from firmware*/ +asmlinkage void __sdei_asm_handler(unsigned long event_num, unsigned long arg, + unsigned long pc, unsigned long pstate); + +/* and its CONFIG_UNMAP_KERNEL_AT_EL0 trampoline */ +asmlinkage void __sdei_asm_entry_trampoline(unsigned long event_num, + unsigned long arg, + unsigned long pc, + unsigned long pstate); + +/* + * The above entry point does the minimum to call C code. This function does + * anything else, before calling the driver. + */ +struct sdei_registered_event; +asmlinkage unsigned long __sdei_handler(struct pt_regs *regs, + struct sdei_registered_event *arg); + +unsigned long sdei_arch_get_entry_point(int conduit); +#define sdei_arch_get_entry_point(x) sdei_arch_get_entry_point(x) + +bool _on_sdei_stack(unsigned long sp); +static inline bool on_sdei_stack(unsigned long sp) +{ + if (!IS_ENABLED(CONFIG_VMAP_STACK)) + return false; + if (!IS_ENABLED(CONFIG_ARM_SDE_INTERFACE)) + return false; + if (in_nmi()) + return _on_sdei_stack(sp); + + return false; +} + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SDEI_H */ diff --git a/arch/arm64/include/asm/sections.h b/arch/arm64/include/asm/sections.h index 941267caa39c..caab039d6305 100644 --- a/arch/arm64/include/asm/sections.h +++ b/arch/arm64/include/asm/sections.h @@ -28,5 +28,6 @@ extern char __initdata_begin[], __initdata_end[]; extern char __inittext_begin[], __inittext_end[]; extern char __irqentry_text_start[], __irqentry_text_end[]; extern char __mmuoff_data_start[], __mmuoff_data_end[]; +extern char __entry_tramp_text_start[], __entry_tramp_text_end[]; #endif /* __ASM_SECTIONS_H */ diff --git a/arch/arm64/include/asm/sparsemem.h b/arch/arm64/include/asm/sparsemem.h index 74a9d301819f..b299929fe56c 100644 --- a/arch/arm64/include/asm/sparsemem.h +++ b/arch/arm64/include/asm/sparsemem.h @@ -17,7 +17,7 @@ #define __ASM_SPARSEMEM_H #ifdef CONFIG_SPARSEMEM -#define MAX_PHYSMEM_BITS 48 +#define MAX_PHYSMEM_BITS CONFIG_ARM64_PA_BITS #define SECTION_SIZE_BITS 30 #endif diff --git a/arch/arm64/include/asm/stacktrace.h b/arch/arm64/include/asm/stacktrace.h index 6ad30776e984..472ef944e932 100644 --- a/arch/arm64/include/asm/stacktrace.h +++ b/arch/arm64/include/asm/stacktrace.h @@ -22,6 +22,7 @@ #include <asm/memory.h> #include <asm/ptrace.h> +#include <asm/sdei.h> struct stackframe { unsigned long fp; @@ -85,6 +86,8 @@ static inline bool on_accessible_stack(struct task_struct *tsk, unsigned long sp return true; if (on_overflow_stack(sp)) return true; + if (on_sdei_stack(sp)) + return true; return false; } diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 08cc88574659..0e1960c59197 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -20,6 +20,7 @@ #ifndef __ASM_SYSREG_H #define __ASM_SYSREG_H +#include <asm/compiler.h> #include <linux/stringify.h> /* @@ -175,6 +176,16 @@ #define SYS_AFSR0_EL1 sys_reg(3, 0, 5, 1, 0) #define SYS_AFSR1_EL1 sys_reg(3, 0, 5, 1, 1) #define SYS_ESR_EL1 sys_reg(3, 0, 5, 2, 0) + +#define SYS_ERRIDR_EL1 sys_reg(3, 0, 5, 3, 0) +#define SYS_ERRSELR_EL1 sys_reg(3, 0, 5, 3, 1) +#define SYS_ERXFR_EL1 sys_reg(3, 0, 5, 4, 0) +#define SYS_ERXCTLR_EL1 sys_reg(3, 0, 5, 4, 1) +#define SYS_ERXSTATUS_EL1 sys_reg(3, 0, 5, 4, 2) +#define SYS_ERXADDR_EL1 sys_reg(3, 0, 5, 4, 3) +#define SYS_ERXMISC0_EL1 sys_reg(3, 0, 5, 5, 0) +#define SYS_ERXMISC1_EL1 sys_reg(3, 0, 5, 5, 1) + #define SYS_FAR_EL1 sys_reg(3, 0, 6, 0, 0) #define SYS_PAR_EL1 sys_reg(3, 0, 7, 4, 0) @@ -278,6 +289,7 @@ #define SYS_AMAIR_EL1 sys_reg(3, 0, 10, 3, 0) #define SYS_VBAR_EL1 sys_reg(3, 0, 12, 0, 0) +#define SYS_DISR_EL1 sys_reg(3, 0, 12, 1, 1) #define SYS_ICC_IAR0_EL1 sys_reg(3, 0, 12, 8, 0) #define SYS_ICC_EOIR0_EL1 sys_reg(3, 0, 12, 8, 1) @@ -353,8 +365,10 @@ #define SYS_DACR32_EL2 sys_reg(3, 4, 3, 0, 0) #define SYS_IFSR32_EL2 sys_reg(3, 4, 5, 0, 1) +#define SYS_VSESR_EL2 sys_reg(3, 4, 5, 2, 3) #define SYS_FPEXC32_EL2 sys_reg(3, 4, 5, 3, 0) +#define SYS_VDISR_EL2 sys_reg(3, 4, 12, 1, 1) #define __SYS__AP0Rx_EL2(x) sys_reg(3, 4, 12, 8, x) #define SYS_ICH_AP0R0_EL2 __SYS__AP0Rx_EL2(0) #define SYS_ICH_AP0R1_EL2 __SYS__AP0Rx_EL2(1) @@ -398,27 +412,85 @@ /* Common SCTLR_ELx flags. */ #define SCTLR_ELx_EE (1 << 25) +#define SCTLR_ELx_IESB (1 << 21) +#define SCTLR_ELx_WXN (1 << 19) #define SCTLR_ELx_I (1 << 12) #define SCTLR_ELx_SA (1 << 3) #define SCTLR_ELx_C (1 << 2) #define SCTLR_ELx_A (1 << 1) #define SCTLR_ELx_M 1 +#define SCTLR_ELx_FLAGS (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \ + SCTLR_ELx_SA | SCTLR_ELx_I | SCTLR_ELx_IESB) + +/* SCTLR_EL2 specific flags. */ #define SCTLR_EL2_RES1 ((1 << 4) | (1 << 5) | (1 << 11) | (1 << 16) | \ (1 << 18) | (1 << 22) | (1 << 23) | (1 << 28) | \ (1 << 29)) +#define SCTLR_EL2_RES0 ((1 << 6) | (1 << 7) | (1 << 8) | (1 << 9) | \ + (1 << 10) | (1 << 13) | (1 << 14) | (1 << 15) | \ + (1 << 17) | (1 << 20) | (1 << 24) | (1 << 26) | \ + (1 << 27) | (1 << 30) | (1 << 31)) + +#ifdef CONFIG_CPU_BIG_ENDIAN +#define ENDIAN_SET_EL2 SCTLR_ELx_EE +#define ENDIAN_CLEAR_EL2 0 +#else +#define ENDIAN_SET_EL2 0 +#define ENDIAN_CLEAR_EL2 SCTLR_ELx_EE +#endif + +/* SCTLR_EL2 value used for the hyp-stub */ +#define SCTLR_EL2_SET (SCTLR_ELx_IESB | ENDIAN_SET_EL2 | SCTLR_EL2_RES1) +#define SCTLR_EL2_CLEAR (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \ + SCTLR_ELx_SA | SCTLR_ELx_I | SCTLR_ELx_WXN | \ + ENDIAN_CLEAR_EL2 | SCTLR_EL2_RES0) + +/* Check all the bits are accounted for */ +#define SCTLR_EL2_BUILD_BUG_ON_MISSING_BITS BUILD_BUG_ON((SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != ~0) -#define SCTLR_ELx_FLAGS (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \ - SCTLR_ELx_SA | SCTLR_ELx_I) /* SCTLR_EL1 specific flags. */ #define SCTLR_EL1_UCI (1 << 26) +#define SCTLR_EL1_E0E (1 << 24) #define SCTLR_EL1_SPAN (1 << 23) +#define SCTLR_EL1_NTWE (1 << 18) +#define SCTLR_EL1_NTWI (1 << 16) #define SCTLR_EL1_UCT (1 << 15) +#define SCTLR_EL1_DZE (1 << 14) +#define SCTLR_EL1_UMA (1 << 9) #define SCTLR_EL1_SED (1 << 8) +#define SCTLR_EL1_ITD (1 << 7) #define SCTLR_EL1_CP15BEN (1 << 5) +#define SCTLR_EL1_SA0 (1 << 4) + +#define SCTLR_EL1_RES1 ((1 << 11) | (1 << 20) | (1 << 22) | (1 << 28) | \ + (1 << 29)) +#define SCTLR_EL1_RES0 ((1 << 6) | (1 << 10) | (1 << 13) | (1 << 17) | \ + (1 << 27) | (1 << 30) | (1 << 31)) + +#ifdef CONFIG_CPU_BIG_ENDIAN +#define ENDIAN_SET_EL1 (SCTLR_EL1_E0E | SCTLR_ELx_EE) +#define ENDIAN_CLEAR_EL1 0 +#else +#define ENDIAN_SET_EL1 0 +#define ENDIAN_CLEAR_EL1 (SCTLR_EL1_E0E | SCTLR_ELx_EE) +#endif + +#define SCTLR_EL1_SET (SCTLR_ELx_M | SCTLR_ELx_C | SCTLR_ELx_SA |\ + SCTLR_EL1_SA0 | SCTLR_EL1_SED | SCTLR_ELx_I |\ + SCTLR_EL1_DZE | SCTLR_EL1_UCT | SCTLR_EL1_NTWI |\ + SCTLR_EL1_NTWE | SCTLR_ELx_IESB | SCTLR_EL1_SPAN |\ + ENDIAN_SET_EL1 | SCTLR_EL1_UCI | SCTLR_EL1_RES1) +#define SCTLR_EL1_CLEAR (SCTLR_ELx_A | SCTLR_EL1_CP15BEN | SCTLR_EL1_ITD |\ + SCTLR_EL1_UMA | SCTLR_ELx_WXN | ENDIAN_CLEAR_EL1 |\ + SCTLR_EL1_RES0) + +/* Check all the bits are accounted for */ +#define SCTLR_EL1_BUILD_BUG_ON_MISSING_BITS BUILD_BUG_ON((SCTLR_EL1_SET ^ SCTLR_EL1_CLEAR) != ~0) /* id_aa64isar0 */ +#define ID_AA64ISAR0_FHM_SHIFT 48 #define ID_AA64ISAR0_DP_SHIFT 44 #define ID_AA64ISAR0_SM4_SHIFT 40 #define ID_AA64ISAR0_SM3_SHIFT 36 @@ -437,7 +509,10 @@ #define ID_AA64ISAR1_DPB_SHIFT 0 /* id_aa64pfr0 */ +#define ID_AA64PFR0_CSV3_SHIFT 60 +#define ID_AA64PFR0_CSV2_SHIFT 56 #define ID_AA64PFR0_SVE_SHIFT 32 +#define ID_AA64PFR0_RAS_SHIFT 28 #define ID_AA64PFR0_GIC_SHIFT 24 #define ID_AA64PFR0_ASIMD_SHIFT 20 #define ID_AA64PFR0_FP_SHIFT 16 @@ -447,6 +522,7 @@ #define ID_AA64PFR0_EL0_SHIFT 0 #define ID_AA64PFR0_SVE 0x1 +#define ID_AA64PFR0_RAS_V1 0x1 #define ID_AA64PFR0_FP_NI 0xf #define ID_AA64PFR0_FP_SUPPORTED 0x0 #define ID_AA64PFR0_ASIMD_NI 0xf @@ -471,6 +547,14 @@ #define ID_AA64MMFR0_TGRAN64_SUPPORTED 0x0 #define ID_AA64MMFR0_TGRAN16_NI 0x0 #define ID_AA64MMFR0_TGRAN16_SUPPORTED 0x1 +#define ID_AA64MMFR0_PARANGE_48 0x5 +#define ID_AA64MMFR0_PARANGE_52 0x6 + +#ifdef CONFIG_ARM64_PA_BITS_52 +#define ID_AA64MMFR0_PARANGE_MAX ID_AA64MMFR0_PARANGE_52 +#else +#define ID_AA64MMFR0_PARANGE_MAX ID_AA64MMFR0_PARANGE_48 +#endif /* id_aa64mmfr1 */ #define ID_AA64MMFR1_PAN_SHIFT 20 @@ -582,6 +666,7 @@ #else +#include <linux/build_bug.h> #include <linux/types.h> asm( @@ -638,6 +723,9 @@ static inline void config_sctlr_el1(u32 clear, u32 set) { u32 val; + SCTLR_EL2_BUILD_BUG_ON_MISSING_BITS; + SCTLR_EL1_BUILD_BUG_ON_MISSING_BITS; + val = read_sysreg(sctlr_el1); val &= ~clear; val |= set; diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h index eb431286bacd..740aa03c5f0d 100644 --- a/arch/arm64/include/asm/thread_info.h +++ b/arch/arm64/include/asm/thread_info.h @@ -51,8 +51,6 @@ struct thread_info { .addr_limit = KERNEL_DS, \ } -#define init_stack (init_thread_union.stack) - #define thread_saved_pc(tsk) \ ((unsigned long)(tsk->thread.cpu_context.pc)) #define thread_saved_sp(tsk) \ diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h index af1c76981911..9e82dd79c7db 100644 --- a/arch/arm64/include/asm/tlbflush.h +++ b/arch/arm64/include/asm/tlbflush.h @@ -23,6 +23,7 @@ #include <linux/sched.h> #include <asm/cputype.h> +#include <asm/mmu.h> /* * Raw TLBI operations. @@ -54,6 +55,11 @@ #define __tlbi(op, ...) __TLBI_N(op, ##__VA_ARGS__, 1, 0) +#define __tlbi_user(op, arg) do { \ + if (arm64_kernel_unmapped_at_el0()) \ + __tlbi(op, (arg) | USER_ASID_FLAG); \ +} while (0) + /* * TLB Management * ============== @@ -115,6 +121,7 @@ static inline void flush_tlb_mm(struct mm_struct *mm) dsb(ishst); __tlbi(aside1is, asid); + __tlbi_user(aside1is, asid); dsb(ish); } @@ -125,6 +132,7 @@ static inline void flush_tlb_page(struct vm_area_struct *vma, dsb(ishst); __tlbi(vale1is, addr); + __tlbi_user(vale1is, addr); dsb(ish); } @@ -151,10 +159,13 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma, dsb(ishst); for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) { - if (last_level) + if (last_level) { __tlbi(vale1is, addr); - else + __tlbi_user(vale1is, addr); + } else { __tlbi(vae1is, addr); + __tlbi_user(vae1is, addr); + } } dsb(ish); } @@ -194,6 +205,7 @@ static inline void __flush_tlb_pgtable(struct mm_struct *mm, unsigned long addr = uaddr >> 12 | (ASID(mm) << 48); __tlbi(vae1is, addr); + __tlbi_user(vae1is, addr); dsb(ish); } diff --git a/arch/arm64/include/asm/traps.h b/arch/arm64/include/asm/traps.h index 1696f9de9359..178e338d2889 100644 --- a/arch/arm64/include/asm/traps.h +++ b/arch/arm64/include/asm/traps.h @@ -19,6 +19,7 @@ #define __ASM_TRAP_H #include <linux/list.h> +#include <asm/esr.h> #include <asm/sections.h> struct pt_regs; @@ -66,4 +67,57 @@ static inline int in_entry_text(unsigned long ptr) return ptr >= (unsigned long)&__entry_text_start && ptr < (unsigned long)&__entry_text_end; } + +/* + * CPUs with the RAS extensions have an Implementation-Defined-Syndrome bit + * to indicate whether this ESR has a RAS encoding. CPUs without this feature + * have a ISS-Valid bit in the same position. + * If this bit is set, we know its not a RAS SError. + * If its clear, we need to know if the CPU supports RAS. Uncategorized RAS + * errors share the same encoding as an all-zeros encoding from a CPU that + * doesn't support RAS. + */ +static inline bool arm64_is_ras_serror(u32 esr) +{ + WARN_ON(preemptible()); + + if (esr & ESR_ELx_IDS) + return false; + + if (this_cpu_has_cap(ARM64_HAS_RAS_EXTN)) + return true; + else + return false; +} + +/* + * Return the AET bits from a RAS SError's ESR. + * + * It is implementation defined whether Uncategorized errors are containable. + * We treat them as Uncontainable. + * Non-RAS SError's are reported as Uncontained/Uncategorized. + */ +static inline u32 arm64_ras_serror_get_severity(u32 esr) +{ + u32 aet = esr & ESR_ELx_AET; + + if (!arm64_is_ras_serror(esr)) { + /* Not a RAS error, we can't interpret the ESR. */ + return ESR_ELx_AET_UC; + } + + /* + * AET is RES0 if 'the value returned in the DFSC field is not + * [ESR_ELx_FSC_SERROR]' + */ + if ((esr & ESR_ELx_FSC) != ESR_ELx_FSC_SERROR) { + /* No severity information : Uncategorized */ + return ESR_ELx_AET_UC; + } + + return aet; +} + +bool arm64_is_fatal_ras_serror(struct pt_regs *regs, unsigned int esr); +void __noreturn arm64_serror_panic(struct pt_regs *regs, u32 esr); #endif diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h index fc0f9eb66039..59fda5292936 100644 --- a/arch/arm64/include/asm/uaccess.h +++ b/arch/arm64/include/asm/uaccess.h @@ -105,17 +105,23 @@ static inline void set_fs(mm_segment_t fs) #ifdef CONFIG_ARM64_SW_TTBR0_PAN static inline void __uaccess_ttbr0_disable(void) { - unsigned long ttbr; + unsigned long flags, ttbr; - /* reserved_ttbr0 placed at the end of swapper_pg_dir */ - ttbr = read_sysreg(ttbr1_el1) + SWAPPER_DIR_SIZE; - write_sysreg(ttbr, ttbr0_el1); + local_irq_save(flags); + ttbr = read_sysreg(ttbr1_el1); + ttbr &= ~TTBR_ASID_MASK; + /* reserved_ttbr0 placed before swapper_pg_dir */ + write_sysreg(ttbr - RESERVED_TTBR0_SIZE, ttbr0_el1); + isb(); + /* Set reserved ASID */ + write_sysreg(ttbr, ttbr1_el1); isb(); + local_irq_restore(flags); } static inline void __uaccess_ttbr0_enable(void) { - unsigned long flags; + unsigned long flags, ttbr0, ttbr1; /* * Disable interrupts to avoid preemption between reading the 'ttbr0' @@ -123,7 +129,17 @@ static inline void __uaccess_ttbr0_enable(void) * roll-over and an update of 'ttbr0'. */ local_irq_save(flags); - write_sysreg(current_thread_info()->ttbr0, ttbr0_el1); + ttbr0 = READ_ONCE(current_thread_info()->ttbr0); + + /* Restore active ASID */ + ttbr1 = read_sysreg(ttbr1_el1); + ttbr1 &= ~TTBR_ASID_MASK; /* safety measure */ + ttbr1 |= ttbr0 & TTBR_ASID_MASK; + write_sysreg(ttbr1, ttbr1_el1); + isb(); + + /* Restore user page table */ + write_sysreg(ttbr0, ttbr0_el1); isb(); local_irq_restore(flags); } @@ -155,6 +171,18 @@ static inline bool uaccess_ttbr0_enable(void) } #endif +static inline void __uaccess_disable_hw_pan(void) +{ + asm(ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN, + CONFIG_ARM64_PAN)); +} + +static inline void __uaccess_enable_hw_pan(void) +{ + asm(ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, + CONFIG_ARM64_PAN)); +} + #define __uaccess_disable(alt) \ do { \ if (!uaccess_ttbr0_disable()) \ diff --git a/arch/arm64/include/asm/vmap_stack.h b/arch/arm64/include/asm/vmap_stack.h new file mode 100644 index 000000000000..0b5ec6e08c10 --- /dev/null +++ b/arch/arm64/include/asm/vmap_stack.h @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2017 Arm Ltd. +#ifndef __ASM_VMAP_STACK_H +#define __ASM_VMAP_STACK_H + +#include <linux/bug.h> +#include <linux/gfp.h> +#include <linux/kconfig.h> +#include <linux/vmalloc.h> +#include <asm/memory.h> +#include <asm/pgtable.h> +#include <asm/thread_info.h> + +/* + * To ensure that VMAP'd stack overflow detection works correctly, all VMAP'd + * stacks need to have the same alignment. + */ +static inline unsigned long *arch_alloc_vmap_stack(size_t stack_size, int node) +{ + BUILD_BUG_ON(!IS_ENABLED(CONFIG_VMAP_STACK)); + + return __vmalloc_node_range(stack_size, THREAD_ALIGN, + VMALLOC_START, VMALLOC_END, + THREADINFO_GFP, PAGE_KERNEL, 0, node, + __builtin_return_address(0)); +} + +#endif /* __ASM_VMAP_STACK_H */ diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h index cda76fa8b9b2..f018c3deea3b 100644 --- a/arch/arm64/include/uapi/asm/hwcap.h +++ b/arch/arm64/include/uapi/asm/hwcap.h @@ -43,5 +43,6 @@ #define HWCAP_ASIMDDP (1 << 20) #define HWCAP_SHA512 (1 << 21) #define HWCAP_SVE (1 << 22) +#define HWCAP_ASIMDFHM (1 << 23) #endif /* _UAPI__ASM_HWCAP_H */ diff --git a/arch/arm64/include/uapi/asm/siginfo.h b/arch/arm64/include/uapi/asm/siginfo.h index 574d12f86039..9b4d91277742 100644 --- a/arch/arm64/include/uapi/asm/siginfo.h +++ b/arch/arm64/include/uapi/asm/siginfo.h @@ -21,4 +21,25 @@ #include <asm-generic/siginfo.h> +/* + * SIGFPE si_codes + */ +#ifdef __KERNEL__ +#define FPE_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + +/* + * SIGBUS si_codes + */ +#ifdef __KERNEL__ +#define BUS_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + +/* + * SIGTRAP si_codes + */ +#ifdef __KERNEL__ +#define TRAP_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + #endif diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 067baace74a0..b87541360f43 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -52,6 +52,11 @@ arm64-obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o \ arm64-obj-$(CONFIG_ARM64_RELOC_TEST) += arm64-reloc-test.o arm64-reloc-test-y := reloc_test_core.o reloc_test_syms.o arm64-obj-$(CONFIG_CRASH_DUMP) += crash_dump.o +arm64-obj-$(CONFIG_ARM_SDE_INTERFACE) += sdei.o + +ifeq ($(CONFIG_KVM),y) +arm64-obj-$(CONFIG_HARDEN_BRANCH_PREDICTOR) += bpi.o +endif obj-y += $(arm64-obj-y) vdso/ probes/ obj-m += $(arm64-obj-m) diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index b3162715ed78..252396a96c78 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -117,7 +117,7 @@ bool __init acpi_psci_present(void) } /* Whether HVC must be used instead of SMC as the PSCI conduit */ -bool __init acpi_psci_use_hvc(void) +bool acpi_psci_use_hvc(void) { return acpi_gbl_FADT.arm_boot_flags & ACPI_FADT_PSCI_USE_HVC; } diff --git a/arch/arm64/kernel/alternative.c b/arch/arm64/kernel/alternative.c index 6dd0a3a3e5c9..414288a558c8 100644 --- a/arch/arm64/kernel/alternative.c +++ b/arch/arm64/kernel/alternative.c @@ -32,6 +32,8 @@ #define ALT_ORIG_PTR(a) __ALT_PTR(a, orig_offset) #define ALT_REPL_PTR(a) __ALT_PTR(a, alt_offset) +int alternatives_applied; + struct alt_region { struct alt_instr *begin; struct alt_instr *end; @@ -143,7 +145,6 @@ static void __apply_alternatives(void *alt_region, bool use_linear_alias) */ static int __apply_alternatives_multi_stop(void *unused) { - static int patched = 0; struct alt_region region = { .begin = (struct alt_instr *)__alt_instructions, .end = (struct alt_instr *)__alt_instructions_end, @@ -151,14 +152,14 @@ static int __apply_alternatives_multi_stop(void *unused) /* We always have a CPU 0 at this point (__init) */ if (smp_processor_id()) { - while (!READ_ONCE(patched)) + while (!READ_ONCE(alternatives_applied)) cpu_relax(); isb(); } else { - BUG_ON(patched); + BUG_ON(alternatives_applied); __apply_alternatives(®ion, true); /* Barriers provided by the cache flushing */ - WRITE_ONCE(patched, 1); + WRITE_ONCE(alternatives_applied, 1); } return 0; diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c index 71bf088f1e4b..1303e04110cd 100644 --- a/arch/arm64/kernel/asm-offsets.c +++ b/arch/arm64/kernel/asm-offsets.c @@ -18,12 +18,14 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include <linux/arm_sdei.h> #include <linux/sched.h> #include <linux/mm.h> #include <linux/dma-mapping.h> #include <linux/kvm_host.h> #include <linux/suspend.h> #include <asm/cpufeature.h> +#include <asm/fixmap.h> #include <asm/thread_info.h> #include <asm/memory.h> #include <asm/smp_plat.h> @@ -130,6 +132,7 @@ int main(void) BLANK(); #ifdef CONFIG_KVM_ARM_HOST DEFINE(VCPU_CONTEXT, offsetof(struct kvm_vcpu, arch.ctxt)); + DEFINE(VCPU_FAULT_DISR, offsetof(struct kvm_vcpu, arch.fault.disr_el1)); DEFINE(CPU_GP_REGS, offsetof(struct kvm_cpu_context, gp_regs)); DEFINE(CPU_USER_PT_REGS, offsetof(struct kvm_regs, regs)); DEFINE(CPU_FP_REGS, offsetof(struct kvm_regs, fp_regs)); @@ -148,11 +151,18 @@ int main(void) DEFINE(ARM_SMCCC_RES_X2_OFFS, offsetof(struct arm_smccc_res, a2)); DEFINE(ARM_SMCCC_QUIRK_ID_OFFS, offsetof(struct arm_smccc_quirk, id)); DEFINE(ARM_SMCCC_QUIRK_STATE_OFFS, offsetof(struct arm_smccc_quirk, state)); - BLANK(); DEFINE(HIBERN_PBE_ORIG, offsetof(struct pbe, orig_address)); DEFINE(HIBERN_PBE_ADDR, offsetof(struct pbe, address)); DEFINE(HIBERN_PBE_NEXT, offsetof(struct pbe, next)); DEFINE(ARM64_FTR_SYSVAL, offsetof(struct arm64_ftr_reg, sys_val)); + BLANK(); +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 + DEFINE(TRAMP_VALIAS, TRAMP_VALIAS); +#endif +#ifdef CONFIG_ARM_SDE_INTERFACE + DEFINE(SDEI_EVENT_INTREGS, offsetof(struct sdei_registered_event, interrupted_regs)); + DEFINE(SDEI_EVENT_PRIORITY, offsetof(struct sdei_registered_event, priority)); +#endif return 0; } diff --git a/arch/arm64/kernel/bpi.S b/arch/arm64/kernel/bpi.S new file mode 100644 index 000000000000..76225c2611ea --- /dev/null +++ b/arch/arm64/kernel/bpi.S @@ -0,0 +1,87 @@ +/* + * Contains CPU specific branch predictor invalidation sequences + * + * Copyright (C) 2018 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/linkage.h> + +.macro ventry target + .rept 31 + nop + .endr + b \target +.endm + +.macro vectors target + ventry \target + 0x000 + ventry \target + 0x080 + ventry \target + 0x100 + ventry \target + 0x180 + + ventry \target + 0x200 + ventry \target + 0x280 + ventry \target + 0x300 + ventry \target + 0x380 + + ventry \target + 0x400 + ventry \target + 0x480 + ventry \target + 0x500 + ventry \target + 0x580 + + ventry \target + 0x600 + ventry \target + 0x680 + ventry \target + 0x700 + ventry \target + 0x780 +.endm + + .align 11 +ENTRY(__bp_harden_hyp_vecs_start) + .rept 4 + vectors __kvm_hyp_vector + .endr +ENTRY(__bp_harden_hyp_vecs_end) +ENTRY(__psci_hyp_bp_inval_start) + sub sp, sp, #(8 * 18) + stp x16, x17, [sp, #(16 * 0)] + stp x14, x15, [sp, #(16 * 1)] + stp x12, x13, [sp, #(16 * 2)] + stp x10, x11, [sp, #(16 * 3)] + stp x8, x9, [sp, #(16 * 4)] + stp x6, x7, [sp, #(16 * 5)] + stp x4, x5, [sp, #(16 * 6)] + stp x2, x3, [sp, #(16 * 7)] + stp x0, x1, [sp, #(16 * 8)] + mov x0, #0x84000000 + smc #0 + ldp x16, x17, [sp, #(16 * 0)] + ldp x14, x15, [sp, #(16 * 1)] + ldp x12, x13, [sp, #(16 * 2)] + ldp x10, x11, [sp, #(16 * 3)] + ldp x8, x9, [sp, #(16 * 4)] + ldp x6, x7, [sp, #(16 * 5)] + ldp x4, x5, [sp, #(16 * 6)] + ldp x2, x3, [sp, #(16 * 7)] + ldp x0, x1, [sp, #(16 * 8)] + add sp, sp, #(8 * 18) +ENTRY(__psci_hyp_bp_inval_end) + +ENTRY(__qcom_hyp_sanitize_link_stack_start) + stp x29, x30, [sp, #-16]! + .rept 16 + bl . + 4 + .endr + ldp x29, x30, [sp], #16 +ENTRY(__qcom_hyp_sanitize_link_stack_end) diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index 0e27f86ee709..ed6881882231 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -30,6 +30,20 @@ is_affected_midr_range(const struct arm64_cpu_capabilities *entry, int scope) entry->midr_range_max); } +static bool __maybe_unused +is_kryo_midr(const struct arm64_cpu_capabilities *entry, int scope) +{ + u32 model; + + WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible()); + + model = read_cpuid_id(); + model &= MIDR_IMPLEMENTOR_MASK | (0xf00 << MIDR_PARTNUM_SHIFT) | + MIDR_ARCHITECTURE_MASK; + + return model == entry->midr_model; +} + static bool has_mismatched_cache_line_size(const struct arm64_cpu_capabilities *entry, int scope) @@ -46,6 +60,127 @@ static int cpu_enable_trap_ctr_access(void *__unused) return 0; } +#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR +#include <asm/mmu_context.h> +#include <asm/cacheflush.h> + +DEFINE_PER_CPU_READ_MOSTLY(struct bp_hardening_data, bp_hardening_data); + +#ifdef CONFIG_KVM +extern char __psci_hyp_bp_inval_start[], __psci_hyp_bp_inval_end[]; +extern char __qcom_hyp_sanitize_link_stack_start[]; +extern char __qcom_hyp_sanitize_link_stack_end[]; + +static void __copy_hyp_vect_bpi(int slot, const char *hyp_vecs_start, + const char *hyp_vecs_end) +{ + void *dst = lm_alias(__bp_harden_hyp_vecs_start + slot * SZ_2K); + int i; + + for (i = 0; i < SZ_2K; i += 0x80) + memcpy(dst + i, hyp_vecs_start, hyp_vecs_end - hyp_vecs_start); + + flush_icache_range((uintptr_t)dst, (uintptr_t)dst + SZ_2K); +} + +static void __install_bp_hardening_cb(bp_hardening_cb_t fn, + const char *hyp_vecs_start, + const char *hyp_vecs_end) +{ + static int last_slot = -1; + static DEFINE_SPINLOCK(bp_lock); + int cpu, slot = -1; + + spin_lock(&bp_lock); + for_each_possible_cpu(cpu) { + if (per_cpu(bp_hardening_data.fn, cpu) == fn) { + slot = per_cpu(bp_hardening_data.hyp_vectors_slot, cpu); + break; + } + } + + if (slot == -1) { + last_slot++; + BUG_ON(((__bp_harden_hyp_vecs_end - __bp_harden_hyp_vecs_start) + / SZ_2K) <= last_slot); + slot = last_slot; + __copy_hyp_vect_bpi(slot, hyp_vecs_start, hyp_vecs_end); + } + + __this_cpu_write(bp_hardening_data.hyp_vectors_slot, slot); + __this_cpu_write(bp_hardening_data.fn, fn); + spin_unlock(&bp_lock); +} +#else +#define __psci_hyp_bp_inval_start NULL +#define __psci_hyp_bp_inval_end NULL +#define __qcom_hyp_sanitize_link_stack_start NULL +#define __qcom_hyp_sanitize_link_stack_end NULL + +static void __install_bp_hardening_cb(bp_hardening_cb_t fn, + const char *hyp_vecs_start, + const char *hyp_vecs_end) +{ + __this_cpu_write(bp_hardening_data.fn, fn); +} +#endif /* CONFIG_KVM */ + +static void install_bp_hardening_cb(const struct arm64_cpu_capabilities *entry, + bp_hardening_cb_t fn, + const char *hyp_vecs_start, + const char *hyp_vecs_end) +{ + u64 pfr0; + + if (!entry->matches(entry, SCOPE_LOCAL_CPU)) + return; + + pfr0 = read_cpuid(ID_AA64PFR0_EL1); + if (cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_CSV2_SHIFT)) + return; + + __install_bp_hardening_cb(fn, hyp_vecs_start, hyp_vecs_end); +} + +#include <linux/psci.h> + +static int enable_psci_bp_hardening(void *data) +{ + const struct arm64_cpu_capabilities *entry = data; + + if (psci_ops.get_version) + install_bp_hardening_cb(entry, + (bp_hardening_cb_t)psci_ops.get_version, + __psci_hyp_bp_inval_start, + __psci_hyp_bp_inval_end); + + return 0; +} + +static void qcom_link_stack_sanitization(void) +{ + u64 tmp; + + asm volatile("mov %0, x30 \n" + ".rept 16 \n" + "bl . + 4 \n" + ".endr \n" + "mov x30, %0 \n" + : "=&r" (tmp)); +} + +static int qcom_enable_link_stack_sanitization(void *data) +{ + const struct arm64_cpu_capabilities *entry = data; + + install_bp_hardening_cb(entry, qcom_link_stack_sanitization, + __qcom_hyp_sanitize_link_stack_start, + __qcom_hyp_sanitize_link_stack_end); + + return 0; +} +#endif /* CONFIG_HARDEN_BRANCH_PREDICTOR */ + #define MIDR_RANGE(model, min, max) \ .def_scope = SCOPE_LOCAL_CPU, \ .matches = is_affected_midr_range, \ @@ -169,6 +304,13 @@ const struct arm64_cpu_capabilities arm64_errata[] = { MIDR_CPU_VAR_REV(0, 0), MIDR_CPU_VAR_REV(0, 0)), }, + { + .desc = "Qualcomm Technologies Kryo erratum 1003", + .capability = ARM64_WORKAROUND_QCOM_FALKOR_E1003, + .def_scope = SCOPE_LOCAL_CPU, + .midr_model = MIDR_QCOM_KRYO, + .matches = is_kryo_midr, + }, #endif #ifdef CONFIG_QCOM_FALKOR_ERRATUM_1009 { @@ -187,6 +329,47 @@ const struct arm64_cpu_capabilities arm64_errata[] = { MIDR_ALL_VERSIONS(MIDR_CORTEX_A73), }, #endif +#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR + { + .capability = ARM64_HARDEN_BRANCH_PREDICTOR, + MIDR_ALL_VERSIONS(MIDR_CORTEX_A57), + .enable = enable_psci_bp_hardening, + }, + { + .capability = ARM64_HARDEN_BRANCH_PREDICTOR, + MIDR_ALL_VERSIONS(MIDR_CORTEX_A72), + .enable = enable_psci_bp_hardening, + }, + { + .capability = ARM64_HARDEN_BRANCH_PREDICTOR, + MIDR_ALL_VERSIONS(MIDR_CORTEX_A73), + .enable = enable_psci_bp_hardening, + }, + { + .capability = ARM64_HARDEN_BRANCH_PREDICTOR, + MIDR_ALL_VERSIONS(MIDR_CORTEX_A75), + .enable = enable_psci_bp_hardening, + }, + { + .capability = ARM64_HARDEN_BRANCH_PREDICTOR, + MIDR_ALL_VERSIONS(MIDR_QCOM_FALKOR_V1), + .enable = qcom_enable_link_stack_sanitization, + }, + { + .capability = ARM64_HARDEN_BP_POST_GUEST_EXIT, + MIDR_ALL_VERSIONS(MIDR_QCOM_FALKOR_V1), + }, + { + .capability = ARM64_HARDEN_BRANCH_PREDICTOR, + MIDR_ALL_VERSIONS(MIDR_BRCM_VULCAN), + .enable = enable_psci_bp_hardening, + }, + { + .capability = ARM64_HARDEN_BRANCH_PREDICTOR, + MIDR_ALL_VERSIONS(MIDR_CAVIUM_THUNDERX2), + .enable = enable_psci_bp_hardening, + }, +#endif { } }; @@ -200,15 +383,18 @@ void verify_local_cpu_errata_workarounds(void) { const struct arm64_cpu_capabilities *caps = arm64_errata; - for (; caps->matches; caps++) - if (!cpus_have_cap(caps->capability) && - caps->matches(caps, SCOPE_LOCAL_CPU)) { + for (; caps->matches; caps++) { + if (cpus_have_cap(caps->capability)) { + if (caps->enable) + caps->enable((void *)caps); + } else if (caps->matches(caps, SCOPE_LOCAL_CPU)) { pr_crit("CPU%d: Requires work around for %s, not detected" " at boot time\n", smp_processor_id(), caps->desc ? : "an erratum"); cpu_die_early(); } + } } void update_cpu_errata_workarounds(void) diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index a73a5928f09b..0fb6a3151443 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -123,6 +123,7 @@ cpufeature_pan_not_uao(const struct arm64_cpu_capabilities *entry, int __unused) * sync with the documentation of the CPU feature register ABI. */ static const struct arm64_ftr_bits ftr_id_aa64isar0[] = { + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_FHM_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_DP_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_SM4_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_SM3_SHIFT, 4, 0), @@ -145,8 +146,11 @@ static const struct arm64_ftr_bits ftr_id_aa64isar1[] = { }; static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = { + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_CSV3_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_CSV2_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_SVE_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_RAS_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_GIC_SHIFT, 4, 0), S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_ASIMD_SHIFT, 4, ID_AA64PFR0_ASIMD_NI), S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_FP_SHIFT, 4, ID_AA64PFR0_FP_NI), @@ -846,6 +850,67 @@ static bool has_no_fpsimd(const struct arm64_cpu_capabilities *entry, int __unus ID_AA64PFR0_FP_SHIFT) < 0; } +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 +static int __kpti_forced; /* 0: not forced, >0: forced on, <0: forced off */ + +static bool unmap_kernel_at_el0(const struct arm64_cpu_capabilities *entry, + int __unused) +{ + u64 pfr0 = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1); + + /* Forced on command line? */ + if (__kpti_forced) { + pr_info_once("kernel page table isolation forced %s by command line option\n", + __kpti_forced > 0 ? "ON" : "OFF"); + return __kpti_forced > 0; + } + + /* Useful for KASLR robustness */ + if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) + return true; + + /* Don't force KPTI for CPUs that are not vulnerable */ + switch (read_cpuid_id() & MIDR_CPU_MODEL_MASK) { + case MIDR_CAVIUM_THUNDERX2: + case MIDR_BRCM_VULCAN: + return false; + } + + /* Defer to CPU feature registers */ + return !cpuid_feature_extract_unsigned_field(pfr0, + ID_AA64PFR0_CSV3_SHIFT); +} + +static int __init parse_kpti(char *str) +{ + bool enabled; + int ret = strtobool(str, &enabled); + + if (ret) + return ret; + + __kpti_forced = enabled ? 1 : -1; + return 0; +} +__setup("kpti=", parse_kpti); +#endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */ + +static int cpu_copy_el2regs(void *__unused) +{ + /* + * Copy register values that aren't redirected by hardware. + * + * Before code patching, we only set tpidr_el1, all CPUs need to copy + * this value to tpidr_el2 before we patch the code. Once we've done + * that, freshly-onlined CPUs will set tpidr_el2, so we don't need to + * do anything here. + */ + if (!alternatives_applied) + write_sysreg(read_sysreg(tpidr_el1), tpidr_el2); + + return 0; +} + static const struct arm64_cpu_capabilities arm64_features[] = { { .desc = "GIC system register CPU interface", @@ -915,6 +980,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_VIRT_HOST_EXTN, .def_scope = SCOPE_SYSTEM, .matches = runs_at_el2, + .enable = cpu_copy_el2regs, }, { .desc = "32-bit EL0 Support", @@ -932,6 +998,14 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .def_scope = SCOPE_SYSTEM, .matches = hyp_offset_low, }, +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 + { + .desc = "Kernel page table isolation (KPTI)", + .capability = ARM64_UNMAP_KERNEL_AT_EL0, + .def_scope = SCOPE_SYSTEM, + .matches = unmap_kernel_at_el0, + }, +#endif { /* FP/SIMD is not implemented */ .capability = ARM64_HAS_NO_FPSIMD, @@ -963,6 +1037,19 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .enable = sve_kernel_enable, }, #endif /* CONFIG_ARM64_SVE */ +#ifdef CONFIG_ARM64_RAS_EXTN + { + .desc = "RAS Extension Support", + .capability = ARM64_HAS_RAS_EXTN, + .def_scope = SCOPE_SYSTEM, + .matches = has_cpuid_feature, + .sys_reg = SYS_ID_AA64PFR0_EL1, + .sign = FTR_UNSIGNED, + .field_pos = ID_AA64PFR0_RAS_SHIFT, + .min_field_value = ID_AA64PFR0_RAS_V1, + .enable = cpu_clear_disr, + }, +#endif /* CONFIG_ARM64_RAS_EXTN */ {}, }; @@ -992,6 +1079,7 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = { HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SM3_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_SM3), HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SM4_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_SM4), HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_DP_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_ASIMDDP), + HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_FHM_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_ASIMDFHM), HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_FP_SHIFT, FTR_SIGNED, 0, CAP_HWCAP, HWCAP_FP), HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_FP_SHIFT, FTR_SIGNED, 1, CAP_HWCAP, HWCAP_FPHP), HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_ASIMD_SHIFT, FTR_SIGNED, 0, CAP_HWCAP, HWCAP_ASIMD), @@ -1071,6 +1159,25 @@ static void __init setup_elf_hwcaps(const struct arm64_cpu_capabilities *hwcaps) cap_set_elf_hwcap(hwcaps); } +/* + * Check if the current CPU has a given feature capability. + * Should be called from non-preemptible context. + */ +static bool __this_cpu_has_cap(const struct arm64_cpu_capabilities *cap_array, + unsigned int cap) +{ + const struct arm64_cpu_capabilities *caps; + + if (WARN_ON(preemptible())) + return false; + + for (caps = cap_array; caps->matches; caps++) + if (caps->capability == cap && + caps->matches(caps, SCOPE_LOCAL_CPU)) + return true; + return false; +} + void update_cpu_capabilities(const struct arm64_cpu_capabilities *caps, const char *info) { @@ -1106,7 +1213,7 @@ void __init enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps) * uses an IPI, giving us a PSTATE that disappears when * we return. */ - stop_machine(caps->enable, NULL, cpu_online_mask); + stop_machine(caps->enable, (void *)caps, cpu_online_mask); } } } @@ -1134,8 +1241,9 @@ verify_local_elf_hwcaps(const struct arm64_cpu_capabilities *caps) } static void -verify_local_cpu_features(const struct arm64_cpu_capabilities *caps) +verify_local_cpu_features(const struct arm64_cpu_capabilities *caps_list) { + const struct arm64_cpu_capabilities *caps = caps_list; for (; caps->matches; caps++) { if (!cpus_have_cap(caps->capability)) continue; @@ -1143,13 +1251,13 @@ verify_local_cpu_features(const struct arm64_cpu_capabilities *caps) * If the new CPU misses an advertised feature, we cannot proceed * further, park the cpu. */ - if (!caps->matches(caps, SCOPE_LOCAL_CPU)) { + if (!__this_cpu_has_cap(caps_list, caps->capability)) { pr_crit("CPU%d: missing feature: %s\n", smp_processor_id(), caps->desc); cpu_die_early(); } if (caps->enable) - caps->enable(NULL); + caps->enable((void *)caps); } } @@ -1189,6 +1297,9 @@ static void verify_local_cpu_capabilities(void) if (system_supports_sve()) verify_sve_features(); + + if (system_uses_ttbr0_pan()) + pr_info("Emulating Privileged Access Never (PAN) using TTBR0_EL1 switching\n"); } void check_local_cpu_capabilities(void) @@ -1225,25 +1336,6 @@ static void __init mark_const_caps_ready(void) static_branch_enable(&arm64_const_caps_ready); } -/* - * Check if the current CPU has a given feature capability. - * Should be called from non-preemptible context. - */ -static bool __this_cpu_has_cap(const struct arm64_cpu_capabilities *cap_array, - unsigned int cap) -{ - const struct arm64_cpu_capabilities *caps; - - if (WARN_ON(preemptible())) - return false; - - for (caps = cap_array; caps->desc; caps++) - if (caps->capability == cap && caps->matches) - return caps->matches(caps, SCOPE_LOCAL_CPU); - - return false; -} - extern const struct arm64_cpu_capabilities arm64_errata[]; bool this_cpu_has_cap(unsigned int cap) @@ -1387,3 +1479,11 @@ static int __init enable_mrs_emulation(void) } core_initcall(enable_mrs_emulation); + +int cpu_clear_disr(void *__unused) +{ + /* Firmware may have left a deferred SError in this register. */ + write_sysreg_s(0, SYS_DISR_EL1); + + return 0; +} diff --git a/arch/arm64/kernel/cpuidle.c b/arch/arm64/kernel/cpuidle.c index fd691087dc9a..f2d13810daa8 100644 --- a/arch/arm64/kernel/cpuidle.c +++ b/arch/arm64/kernel/cpuidle.c @@ -47,6 +47,8 @@ int arm_cpuidle_suspend(int index) #include <acpi/processor.h> +#define ARM64_LPI_IS_RETENTION_STATE(arch_flags) (!(arch_flags)) + int acpi_processor_ffh_lpi_probe(unsigned int cpu) { return arm_cpuidle_init(cpu); @@ -54,6 +56,10 @@ int acpi_processor_ffh_lpi_probe(unsigned int cpu) int acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi) { - return CPU_PM_CPU_IDLE_ENTER(arm_cpuidle_suspend, lpi->index); + if (ARM64_LPI_IS_RETENTION_STATE(lpi->arch_flags)) + return CPU_PM_CPU_IDLE_ENTER_RETENTION(arm_cpuidle_suspend, + lpi->index); + else + return CPU_PM_CPU_IDLE_ENTER(arm_cpuidle_suspend, lpi->index); } #endif diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c index 1e2554543506..7f94623df8a5 100644 --- a/arch/arm64/kernel/cpuinfo.c +++ b/arch/arm64/kernel/cpuinfo.c @@ -76,6 +76,7 @@ static const char *const hwcap_str[] = { "asimddp", "sha512", "sve", + "asimdfhm", NULL }; diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index a88b6ccebbb4..53781f5687c5 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -209,12 +209,13 @@ NOKPROBE_SYMBOL(call_step_hook); static void send_user_sigtrap(int si_code) { struct pt_regs *regs = current_pt_regs(); - siginfo_t info = { - .si_signo = SIGTRAP, - .si_errno = 0, - .si_code = si_code, - .si_addr = (void __user *)instruction_pointer(regs), - }; + siginfo_t info; + + clear_siginfo(&info); + info.si_signo = SIGTRAP; + info.si_errno = 0; + info.si_code = si_code; + info.si_addr = (void __user *)instruction_pointer(regs); if (WARN_ON(!user_mode(regs))) return; diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c index 82cd07592519..f85ac58d08a3 100644 --- a/arch/arm64/kernel/efi.c +++ b/arch/arm64/kernel/efi.c @@ -48,7 +48,9 @@ static __init pteval_t create_mapping_protection(efi_memory_desc_t *md) return pgprot_val(PAGE_KERNEL_ROX); /* RW- */ - if (attr & EFI_MEMORY_XP || type != EFI_RUNTIME_SERVICES_CODE) + if (((attr & (EFI_MEMORY_RP | EFI_MEMORY_WP | EFI_MEMORY_XP)) == + EFI_MEMORY_XP) || + type != EFI_RUNTIME_SERVICES_CODE) return pgprot_val(PAGE_KERNEL); /* RWX */ diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 6d14b8f29b5f..cccd2788e631 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -28,6 +28,8 @@ #include <asm/errno.h> #include <asm/esr.h> #include <asm/irq.h> +#include <asm/memory.h> +#include <asm/mmu.h> #include <asm/processor.h> #include <asm/ptrace.h> #include <asm/thread_info.h> @@ -69,8 +71,21 @@ #define BAD_FIQ 2 #define BAD_ERROR 3 - .macro kernel_ventry label + .macro kernel_ventry, el, label, regsize = 64 .align 7 +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 +alternative_if ARM64_UNMAP_KERNEL_AT_EL0 + .if \el == 0 + .if \regsize == 64 + mrs x30, tpidrro_el0 + msr tpidrro_el0, xzr + .else + mov x30, xzr + .endif + .endif +alternative_else_nop_endif +#endif + sub sp, sp, #S_FRAME_SIZE #ifdef CONFIG_VMAP_STACK /* @@ -82,7 +97,7 @@ tbnz x0, #THREAD_SHIFT, 0f sub x0, sp, x0 // x0'' = sp' - x0' = (sp + x0) - sp = x0 sub sp, sp, x0 // sp'' = sp' - x0 = (sp + x0) - x0 = sp - b \label + b el\()\el\()_\label 0: /* @@ -114,7 +129,12 @@ sub sp, sp, x0 mrs x0, tpidrro_el0 #endif - b \label + b el\()\el\()_\label + .endm + + .macro tramp_alias, dst, sym + mov_q \dst, TRAMP_VALIAS + add \dst, \dst, #(\sym - .entry.tramp.text) .endm .macro kernel_entry, el, regsize = 64 @@ -185,7 +205,7 @@ alternative_else_nop_endif .if \el != 0 mrs x21, ttbr0_el1 - tst x21, #0xffff << 48 // Check for the reserved ASID + tst x21, #TTBR_ASID_MASK // Check for the reserved ASID orr x23, x23, #PSR_PAN_BIT // Set the emulated PAN in the saved SPSR b.eq 1f // TTBR0 access already disabled and x23, x23, #~PSR_PAN_BIT // Clear the emulated PAN in the saved SPSR @@ -248,7 +268,7 @@ alternative_else_nop_endif tbnz x22, #22, 1f // Skip re-enabling TTBR0 access if the PSR_PAN_BIT is set .endif - __uaccess_ttbr0_enable x0 + __uaccess_ttbr0_enable x0, x1 .if \el == 0 /* @@ -257,7 +277,7 @@ alternative_else_nop_endif * Cavium erratum 27456 (broadcast TLBI instructions may cause I-cache * corruption). */ - post_ttbr0_update_workaround + bl post_ttbr_update_workaround .endif 1: .if \el != 0 @@ -269,18 +289,20 @@ alternative_else_nop_endif .if \el == 0 ldr x23, [sp, #S_SP] // load return stack pointer msr sp_el0, x23 + tst x22, #PSR_MODE32_BIT // native task? + b.eq 3f + #ifdef CONFIG_ARM64_ERRATUM_845719 alternative_if ARM64_WORKAROUND_845719 - tbz x22, #4, 1f #ifdef CONFIG_PID_IN_CONTEXTIDR mrs x29, contextidr_el1 msr contextidr_el1, x29 #else msr contextidr_el1, xzr #endif -1: alternative_else_nop_endif #endif +3: .endif msr elr_el1, x21 // set up the return data @@ -302,7 +324,25 @@ alternative_else_nop_endif ldp x28, x29, [sp, #16 * 14] ldr lr, [sp, #S_LR] add sp, sp, #S_FRAME_SIZE // restore sp - eret // return to kernel + /* + * ARCH_HAS_MEMBARRIER_SYNC_CORE rely on eret context synchronization + * when returning from IPI handler, and when returning to user-space. + */ + + .if \el == 0 +alternative_insn eret, nop, ARM64_UNMAP_KERNEL_AT_EL0 +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 + bne 4f + msr far_el1, x30 + tramp_alias x30, tramp_exit_native + br x30 +4: + tramp_alias x30, tramp_exit_compat + br x30 +#endif + .else + eret + .endif .endm .macro irq_stack_entry @@ -367,31 +407,31 @@ tsk .req x28 // current thread_info .align 11 ENTRY(vectors) - kernel_ventry el1_sync_invalid // Synchronous EL1t - kernel_ventry el1_irq_invalid // IRQ EL1t - kernel_ventry el1_fiq_invalid // FIQ EL1t - kernel_ventry el1_error_invalid // Error EL1t + kernel_ventry 1, sync_invalid // Synchronous EL1t + kernel_ventry 1, irq_invalid // IRQ EL1t + kernel_ventry 1, fiq_invalid // FIQ EL1t + kernel_ventry 1, error_invalid // Error EL1t - kernel_ventry el1_sync // Synchronous EL1h - kernel_ventry el1_irq // IRQ EL1h - kernel_ventry el1_fiq_invalid // FIQ EL1h - kernel_ventry el1_error // Error EL1h + kernel_ventry 1, sync // Synchronous EL1h + kernel_ventry 1, irq // IRQ EL1h + kernel_ventry 1, fiq_invalid // FIQ EL1h + kernel_ventry 1, error // Error EL1h - kernel_ventry el0_sync // Synchronous 64-bit EL0 - kernel_ventry el0_irq // IRQ 64-bit EL0 - kernel_ventry el0_fiq_invalid // FIQ 64-bit EL0 - kernel_ventry el0_error // Error 64-bit EL0 + kernel_ventry 0, sync // Synchronous 64-bit EL0 + kernel_ventry 0, irq // IRQ 64-bit EL0 + kernel_ventry 0, fiq_invalid // FIQ 64-bit EL0 + kernel_ventry 0, error // Error 64-bit EL0 #ifdef CONFIG_COMPAT - kernel_ventry el0_sync_compat // Synchronous 32-bit EL0 - kernel_ventry el0_irq_compat // IRQ 32-bit EL0 - kernel_ventry el0_fiq_invalid_compat // FIQ 32-bit EL0 - kernel_ventry el0_error_compat // Error 32-bit EL0 + kernel_ventry 0, sync_compat, 32 // Synchronous 32-bit EL0 + kernel_ventry 0, irq_compat, 32 // IRQ 32-bit EL0 + kernel_ventry 0, fiq_invalid_compat, 32 // FIQ 32-bit EL0 + kernel_ventry 0, error_compat, 32 // Error 32-bit EL0 #else - kernel_ventry el0_sync_invalid // Synchronous 32-bit EL0 - kernel_ventry el0_irq_invalid // IRQ 32-bit EL0 - kernel_ventry el0_fiq_invalid // FIQ 32-bit EL0 - kernel_ventry el0_error_invalid // Error 32-bit EL0 + kernel_ventry 0, sync_invalid, 32 // Synchronous 32-bit EL0 + kernel_ventry 0, irq_invalid, 32 // IRQ 32-bit EL0 + kernel_ventry 0, fiq_invalid, 32 // FIQ 32-bit EL0 + kernel_ventry 0, error_invalid, 32 // Error 32-bit EL0 #endif END(vectors) @@ -685,12 +725,15 @@ el0_ia: * Instruction abort handling */ mrs x26, far_el1 - enable_daif + enable_da_f +#ifdef CONFIG_TRACE_IRQFLAGS + bl trace_hardirqs_off +#endif ct_user_exit mov x0, x26 mov x1, x25 mov x2, sp - bl do_mem_abort + bl do_el0_ia_bp_hardening b ret_to_user el0_fpsimd_acc: /* @@ -943,6 +986,124 @@ __ni_sys_trace: .popsection // .entry.text +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 +/* + * Exception vectors trampoline. + */ + .pushsection ".entry.tramp.text", "ax" + + .macro tramp_map_kernel, tmp + mrs \tmp, ttbr1_el1 + add \tmp, \tmp, #(PAGE_SIZE + RESERVED_TTBR0_SIZE) + bic \tmp, \tmp, #USER_ASID_FLAG + msr ttbr1_el1, \tmp +#ifdef CONFIG_QCOM_FALKOR_ERRATUM_1003 +alternative_if ARM64_WORKAROUND_QCOM_FALKOR_E1003 + /* ASID already in \tmp[63:48] */ + movk \tmp, #:abs_g2_nc:(TRAMP_VALIAS >> 12) + movk \tmp, #:abs_g1_nc:(TRAMP_VALIAS >> 12) + /* 2MB boundary containing the vectors, so we nobble the walk cache */ + movk \tmp, #:abs_g0_nc:((TRAMP_VALIAS & ~(SZ_2M - 1)) >> 12) + isb + tlbi vae1, \tmp + dsb nsh +alternative_else_nop_endif +#endif /* CONFIG_QCOM_FALKOR_ERRATUM_1003 */ + .endm + + .macro tramp_unmap_kernel, tmp + mrs \tmp, ttbr1_el1 + sub \tmp, \tmp, #(PAGE_SIZE + RESERVED_TTBR0_SIZE) + orr \tmp, \tmp, #USER_ASID_FLAG + msr ttbr1_el1, \tmp + /* + * We avoid running the post_ttbr_update_workaround here because the + * user and kernel ASIDs don't have conflicting mappings, so any + * "blessing" as described in: + * + * http://lkml.kernel.org/r/56BB848A.6060603@caviumnetworks.com + * + * will not hurt correctness. Whilst this may partially defeat the + * point of using split ASIDs in the first place, it avoids + * the hit of invalidating the entire I-cache on every return to + * userspace. + */ + .endm + + .macro tramp_ventry, regsize = 64 + .align 7 +1: + .if \regsize == 64 + msr tpidrro_el0, x30 // Restored in kernel_ventry + .endif + /* + * Defend against branch aliasing attacks by pushing a dummy + * entry onto the return stack and using a RET instruction to + * enter the full-fat kernel vectors. + */ + bl 2f + b . +2: + tramp_map_kernel x30 +#ifdef CONFIG_RANDOMIZE_BASE + adr x30, tramp_vectors + PAGE_SIZE +alternative_insn isb, nop, ARM64_WORKAROUND_QCOM_FALKOR_E1003 + ldr x30, [x30] +#else + ldr x30, =vectors +#endif + prfm plil1strm, [x30, #(1b - tramp_vectors)] + msr vbar_el1, x30 + add x30, x30, #(1b - tramp_vectors) + isb + ret + .endm + + .macro tramp_exit, regsize = 64 + adr x30, tramp_vectors + msr vbar_el1, x30 + tramp_unmap_kernel x30 + .if \regsize == 64 + mrs x30, far_el1 + .endif + eret + .endm + + .align 11 +ENTRY(tramp_vectors) + .space 0x400 + + tramp_ventry + tramp_ventry + tramp_ventry + tramp_ventry + + tramp_ventry 32 + tramp_ventry 32 + tramp_ventry 32 + tramp_ventry 32 +END(tramp_vectors) + +ENTRY(tramp_exit_native) + tramp_exit +END(tramp_exit_native) + +ENTRY(tramp_exit_compat) + tramp_exit 32 +END(tramp_exit_compat) + + .ltorg + .popsection // .entry.tramp.text +#ifdef CONFIG_RANDOMIZE_BASE + .pushsection ".rodata", "a" + .align PAGE_SHIFT + .globl __entry_tramp_data_start +__entry_tramp_data_start: + .quad vectors + .popsection // .rodata +#endif /* CONFIG_RANDOMIZE_BASE */ +#endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */ + /* * Special system call wrappers. */ @@ -996,3 +1157,180 @@ ENTRY(ret_from_fork) b ret_to_user ENDPROC(ret_from_fork) NOKPROBE(ret_from_fork) + +#ifdef CONFIG_ARM_SDE_INTERFACE + +#include <asm/sdei.h> +#include <uapi/linux/arm_sdei.h> + +.macro sdei_handler_exit exit_mode + /* On success, this call never returns... */ + cmp \exit_mode, #SDEI_EXIT_SMC + b.ne 99f + smc #0 + b . +99: hvc #0 + b . +.endm + +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 +/* + * The regular SDEI entry point may have been unmapped along with the rest of + * the kernel. This trampoline restores the kernel mapping to make the x1 memory + * argument accessible. + * + * This clobbers x4, __sdei_handler() will restore this from firmware's + * copy. + */ +.ltorg +.pushsection ".entry.tramp.text", "ax" +ENTRY(__sdei_asm_entry_trampoline) + mrs x4, ttbr1_el1 + tbz x4, #USER_ASID_BIT, 1f + + tramp_map_kernel tmp=x4 + isb + mov x4, xzr + + /* + * Use reg->interrupted_regs.addr_limit to remember whether to unmap + * the kernel on exit. + */ +1: str x4, [x1, #(SDEI_EVENT_INTREGS + S_ORIG_ADDR_LIMIT)] + +#ifdef CONFIG_RANDOMIZE_BASE + adr x4, tramp_vectors + PAGE_SIZE + add x4, x4, #:lo12:__sdei_asm_trampoline_next_handler + ldr x4, [x4] +#else + ldr x4, =__sdei_asm_handler +#endif + br x4 +ENDPROC(__sdei_asm_entry_trampoline) +NOKPROBE(__sdei_asm_entry_trampoline) + +/* + * Make the exit call and restore the original ttbr1_el1 + * + * x0 & x1: setup for the exit API call + * x2: exit_mode + * x4: struct sdei_registered_event argument from registration time. + */ +ENTRY(__sdei_asm_exit_trampoline) + ldr x4, [x4, #(SDEI_EVENT_INTREGS + S_ORIG_ADDR_LIMIT)] + cbnz x4, 1f + + tramp_unmap_kernel tmp=x4 + +1: sdei_handler_exit exit_mode=x2 +ENDPROC(__sdei_asm_exit_trampoline) +NOKPROBE(__sdei_asm_exit_trampoline) + .ltorg +.popsection // .entry.tramp.text +#ifdef CONFIG_RANDOMIZE_BASE +.pushsection ".rodata", "a" +__sdei_asm_trampoline_next_handler: + .quad __sdei_asm_handler +.popsection // .rodata +#endif /* CONFIG_RANDOMIZE_BASE */ +#endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */ + +/* + * Software Delegated Exception entry point. + * + * x0: Event number + * x1: struct sdei_registered_event argument from registration time. + * x2: interrupted PC + * x3: interrupted PSTATE + * x4: maybe clobbered by the trampoline + * + * Firmware has preserved x0->x17 for us, we must save/restore the rest to + * follow SMC-CC. We save (or retrieve) all the registers as the handler may + * want them. + */ +ENTRY(__sdei_asm_handler) + stp x2, x3, [x1, #SDEI_EVENT_INTREGS + S_PC] + stp x4, x5, [x1, #SDEI_EVENT_INTREGS + 16 * 2] + stp x6, x7, [x1, #SDEI_EVENT_INTREGS + 16 * 3] + stp x8, x9, [x1, #SDEI_EVENT_INTREGS + 16 * 4] + stp x10, x11, [x1, #SDEI_EVENT_INTREGS + 16 * 5] + stp x12, x13, [x1, #SDEI_EVENT_INTREGS + 16 * 6] + stp x14, x15, [x1, #SDEI_EVENT_INTREGS + 16 * 7] + stp x16, x17, [x1, #SDEI_EVENT_INTREGS + 16 * 8] + stp x18, x19, [x1, #SDEI_EVENT_INTREGS + 16 * 9] + stp x20, x21, [x1, #SDEI_EVENT_INTREGS + 16 * 10] + stp x22, x23, [x1, #SDEI_EVENT_INTREGS + 16 * 11] + stp x24, x25, [x1, #SDEI_EVENT_INTREGS + 16 * 12] + stp x26, x27, [x1, #SDEI_EVENT_INTREGS + 16 * 13] + stp x28, x29, [x1, #SDEI_EVENT_INTREGS + 16 * 14] + mov x4, sp + stp lr, x4, [x1, #SDEI_EVENT_INTREGS + S_LR] + + mov x19, x1 + +#ifdef CONFIG_VMAP_STACK + /* + * entry.S may have been using sp as a scratch register, find whether + * this is a normal or critical event and switch to the appropriate + * stack for this CPU. + */ + ldrb w4, [x19, #SDEI_EVENT_PRIORITY] + cbnz w4, 1f + ldr_this_cpu dst=x5, sym=sdei_stack_normal_ptr, tmp=x6 + b 2f +1: ldr_this_cpu dst=x5, sym=sdei_stack_critical_ptr, tmp=x6 +2: mov x6, #SDEI_STACK_SIZE + add x5, x5, x6 + mov sp, x5 +#endif + + /* + * We may have interrupted userspace, or a guest, or exit-from or + * return-to either of these. We can't trust sp_el0, restore it. + */ + mrs x28, sp_el0 + ldr_this_cpu dst=x0, sym=__entry_task, tmp=x1 + msr sp_el0, x0 + + /* If we interrupted the kernel point to the previous stack/frame. */ + and x0, x3, #0xc + mrs x1, CurrentEL + cmp x0, x1 + csel x29, x29, xzr, eq // fp, or zero + csel x4, x2, xzr, eq // elr, or zero + + stp x29, x4, [sp, #-16]! + mov x29, sp + + add x0, x19, #SDEI_EVENT_INTREGS + mov x1, x19 + bl __sdei_handler + + msr sp_el0, x28 + /* restore regs >x17 that we clobbered */ + mov x4, x19 // keep x4 for __sdei_asm_exit_trampoline + ldp x28, x29, [x4, #SDEI_EVENT_INTREGS + 16 * 14] + ldp x18, x19, [x4, #SDEI_EVENT_INTREGS + 16 * 9] + ldp lr, x1, [x4, #SDEI_EVENT_INTREGS + S_LR] + mov sp, x1 + + mov x1, x0 // address to complete_and_resume + /* x0 = (x0 <= 1) ? EVENT_COMPLETE:EVENT_COMPLETE_AND_RESUME */ + cmp x0, #1 + mov_q x2, SDEI_1_0_FN_SDEI_EVENT_COMPLETE + mov_q x3, SDEI_1_0_FN_SDEI_EVENT_COMPLETE_AND_RESUME + csel x0, x2, x3, ls + + ldr_l x2, sdei_exit_mode + +alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0 + sdei_handler_exit exit_mode=x2 +alternative_else_nop_endif + +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 + tramp_alias dst=x5, sym=__sdei_asm_exit_trampoline + br x5 +#endif +ENDPROC(__sdei_asm_handler) +NOKPROBE(__sdei_asm_handler) +#endif /* CONFIG_ARM_SDE_INTERFACE */ diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index fae81f7964b4..e7226c4c7493 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -867,7 +867,7 @@ asmlinkage void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs) asmlinkage void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs) { siginfo_t info; - unsigned int si_code = 0; + unsigned int si_code = FPE_FIXME; if (esr & FPEXC_IOF) si_code = FPE_FLTINV; @@ -1036,14 +1036,14 @@ void fpsimd_restore_current_state(void) * flag that indicates that the FPSIMD register contents are the most recent * FPSIMD state of 'current' */ -void fpsimd_update_current_state(struct fpsimd_state *state) +void fpsimd_update_current_state(struct user_fpsimd_state const *state) { if (!system_supports_fpsimd()) return; local_bh_disable(); - current->thread.fpsimd_state.user_fpsimd = state->user_fpsimd; + current->thread.fpsimd_state.user_fpsimd = *state; if (system_supports_sve() && test_thread_flag(TIF_SVE)) fpsimd_to_sve(current); diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index e3cb9fbf96b6..ba3ab04788dc 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -148,6 +148,26 @@ preserve_boot_args: ENDPROC(preserve_boot_args) /* + * Macro to arrange a physical address in a page table entry, taking care of + * 52-bit addresses. + * + * Preserves: phys + * Returns: pte + */ + .macro phys_to_pte, phys, pte +#ifdef CONFIG_ARM64_PA_BITS_52 + /* + * We assume \phys is 64K aligned and this is guaranteed by only + * supporting this configuration with 64K pages. + */ + orr \pte, \phys, \phys, lsr #36 + and \pte, \pte, #PTE_ADDR_MASK +#else + mov \pte, \phys +#endif + .endm + +/* * Macro to create a table entry to the next page. * * tbl: page table address @@ -156,54 +176,124 @@ ENDPROC(preserve_boot_args) * ptrs: #imm pointers per table page * * Preserves: virt - * Corrupts: tmp1, tmp2 + * Corrupts: ptrs, tmp1, tmp2 * Returns: tbl -> next level table page address */ .macro create_table_entry, tbl, virt, shift, ptrs, tmp1, tmp2 - lsr \tmp1, \virt, #\shift - and \tmp1, \tmp1, #\ptrs - 1 // table index - add \tmp2, \tbl, #PAGE_SIZE + add \tmp1, \tbl, #PAGE_SIZE + phys_to_pte \tmp1, \tmp2 orr \tmp2, \tmp2, #PMD_TYPE_TABLE // address of next table and entry type + lsr \tmp1, \virt, #\shift + sub \ptrs, \ptrs, #1 + and \tmp1, \tmp1, \ptrs // table index str \tmp2, [\tbl, \tmp1, lsl #3] add \tbl, \tbl, #PAGE_SIZE // next level table page .endm /* - * Macro to populate the PGD (and possibily PUD) for the corresponding - * block entry in the next level (tbl) for the given virtual address. + * Macro to populate page table entries, these entries can be pointers to the next level + * or last level entries pointing to physical memory. + * + * tbl: page table address + * rtbl: pointer to page table or physical memory + * index: start index to write + * eindex: end index to write - [index, eindex] written to + * flags: flags for pagetable entry to or in + * inc: increment to rtbl between each entry + * tmp1: temporary variable * - * Preserves: tbl, next, virt - * Corrupts: tmp1, tmp2 + * Preserves: tbl, eindex, flags, inc + * Corrupts: index, tmp1 + * Returns: rtbl */ - .macro create_pgd_entry, tbl, virt, tmp1, tmp2 - create_table_entry \tbl, \virt, PGDIR_SHIFT, PTRS_PER_PGD, \tmp1, \tmp2 -#if SWAPPER_PGTABLE_LEVELS > 3 - create_table_entry \tbl, \virt, PUD_SHIFT, PTRS_PER_PUD, \tmp1, \tmp2 -#endif -#if SWAPPER_PGTABLE_LEVELS > 2 - create_table_entry \tbl, \virt, SWAPPER_TABLE_SHIFT, PTRS_PER_PTE, \tmp1, \tmp2 -#endif + .macro populate_entries, tbl, rtbl, index, eindex, flags, inc, tmp1 +.Lpe\@: phys_to_pte \rtbl, \tmp1 + orr \tmp1, \tmp1, \flags // tmp1 = table entry + str \tmp1, [\tbl, \index, lsl #3] + add \rtbl, \rtbl, \inc // rtbl = pa next level + add \index, \index, #1 + cmp \index, \eindex + b.ls .Lpe\@ + .endm + +/* + * Compute indices of table entries from virtual address range. If multiple entries + * were needed in the previous page table level then the next page table level is assumed + * to be composed of multiple pages. (This effectively scales the end index). + * + * vstart: virtual address of start of range + * vend: virtual address of end of range + * shift: shift used to transform virtual address into index + * ptrs: number of entries in page table + * istart: index in table corresponding to vstart + * iend: index in table corresponding to vend + * count: On entry: how many extra entries were required in previous level, scales + * our end index. + * On exit: returns how many extra entries required for next page table level + * + * Preserves: vstart, vend, shift, ptrs + * Returns: istart, iend, count + */ + .macro compute_indices, vstart, vend, shift, ptrs, istart, iend, count + lsr \iend, \vend, \shift + mov \istart, \ptrs + sub \istart, \istart, #1 + and \iend, \iend, \istart // iend = (vend >> shift) & (ptrs - 1) + mov \istart, \ptrs + mul \istart, \istart, \count + add \iend, \iend, \istart // iend += (count - 1) * ptrs + // our entries span multiple tables + + lsr \istart, \vstart, \shift + mov \count, \ptrs + sub \count, \count, #1 + and \istart, \istart, \count + + sub \count, \iend, \istart .endm /* - * Macro to populate block entries in the page table for the start..end - * virtual range (inclusive). + * Map memory for specified virtual address range. Each level of page table needed supports + * multiple entries. If a level requires n entries the next page table level is assumed to be + * formed from n pages. + * + * tbl: location of page table + * rtbl: address to be used for first level page table entry (typically tbl + PAGE_SIZE) + * vstart: start address to map + * vend: end address to map - we map [vstart, vend] + * flags: flags to use to map last level entries + * phys: physical address corresponding to vstart - physical memory is contiguous + * pgds: the number of pgd entries * - * Preserves: tbl, flags - * Corrupts: phys, start, end, pstate + * Temporaries: istart, iend, tmp, count, sv - these need to be different registers + * Preserves: vstart, vend, flags + * Corrupts: tbl, rtbl, istart, iend, tmp, count, sv */ - .macro create_block_map, tbl, flags, phys, start, end - lsr \phys, \phys, #SWAPPER_BLOCK_SHIFT - lsr \start, \start, #SWAPPER_BLOCK_SHIFT - and \start, \start, #PTRS_PER_PTE - 1 // table index - orr \phys, \flags, \phys, lsl #SWAPPER_BLOCK_SHIFT // table entry - lsr \end, \end, #SWAPPER_BLOCK_SHIFT - and \end, \end, #PTRS_PER_PTE - 1 // table end index -9999: str \phys, [\tbl, \start, lsl #3] // store the entry - add \start, \start, #1 // next entry - add \phys, \phys, #SWAPPER_BLOCK_SIZE // next block - cmp \start, \end - b.ls 9999b + .macro map_memory, tbl, rtbl, vstart, vend, flags, phys, pgds, istart, iend, tmp, count, sv + add \rtbl, \tbl, #PAGE_SIZE + mov \sv, \rtbl + mov \count, #0 + compute_indices \vstart, \vend, #PGDIR_SHIFT, \pgds, \istart, \iend, \count + populate_entries \tbl, \rtbl, \istart, \iend, #PMD_TYPE_TABLE, #PAGE_SIZE, \tmp + mov \tbl, \sv + mov \sv, \rtbl + +#if SWAPPER_PGTABLE_LEVELS > 3 + compute_indices \vstart, \vend, #PUD_SHIFT, #PTRS_PER_PUD, \istart, \iend, \count + populate_entries \tbl, \rtbl, \istart, \iend, #PMD_TYPE_TABLE, #PAGE_SIZE, \tmp + mov \tbl, \sv + mov \sv, \rtbl +#endif + +#if SWAPPER_PGTABLE_LEVELS > 2 + compute_indices \vstart, \vend, #SWAPPER_TABLE_SHIFT, #PTRS_PER_PMD, \istart, \iend, \count + populate_entries \tbl, \rtbl, \istart, \iend, #PMD_TYPE_TABLE, #PAGE_SIZE, \tmp + mov \tbl, \sv +#endif + + compute_indices \vstart, \vend, #SWAPPER_BLOCK_SHIFT, #PTRS_PER_PTE, \istart, \iend, \count + bic \count, \phys, #SWAPPER_BLOCK_SIZE - 1 + populate_entries \tbl, \count, \istart, \iend, \flags, #SWAPPER_BLOCK_SIZE, \tmp .endm /* @@ -221,14 +311,16 @@ __create_page_tables: * dirty cache lines being evicted. */ adrp x0, idmap_pg_dir - ldr x1, =(IDMAP_DIR_SIZE + SWAPPER_DIR_SIZE + RESERVED_TTBR0_SIZE) + adrp x1, swapper_pg_end + sub x1, x1, x0 bl __inval_dcache_area /* * Clear the idmap and swapper page tables. */ adrp x0, idmap_pg_dir - ldr x1, =(IDMAP_DIR_SIZE + SWAPPER_DIR_SIZE + RESERVED_TTBR0_SIZE) + adrp x1, swapper_pg_end + sub x1, x1, x0 1: stp xzr, xzr, [x0], #16 stp xzr, xzr, [x0], #16 stp xzr, xzr, [x0], #16 @@ -244,26 +336,13 @@ __create_page_tables: adrp x0, idmap_pg_dir adrp x3, __idmap_text_start // __pa(__idmap_text_start) -#ifndef CONFIG_ARM64_VA_BITS_48 -#define EXTRA_SHIFT (PGDIR_SHIFT + PAGE_SHIFT - 3) -#define EXTRA_PTRS (1 << (48 - EXTRA_SHIFT)) - - /* - * If VA_BITS < 48, it may be too small to allow for an ID mapping to be - * created that covers system RAM if that is located sufficiently high - * in the physical address space. So for the ID map, use an extended - * virtual range in that case, by configuring an additional translation - * level. - * First, we have to verify our assumption that the current value of - * VA_BITS was chosen such that all translation levels are fully - * utilised, and that lowering T0SZ will always result in an additional - * translation level to be configured. - */ -#if VA_BITS != EXTRA_SHIFT -#error "Mismatch between VA_BITS and page size/number of translation levels" -#endif - /* + * VA_BITS may be too small to allow for an ID mapping to be created + * that covers system RAM if that is located sufficiently high in the + * physical address space. So for the ID map, use an extended virtual + * range in that case, and configure an additional translation level + * if needed. + * * Calculate the maximum allowed value for TCR_EL1.T0SZ so that the * entire ID map region can be mapped. As T0SZ == (64 - #bits used), * this number conveniently equals the number of leading zeroes in @@ -272,21 +351,44 @@ __create_page_tables: adrp x5, __idmap_text_end clz x5, x5 cmp x5, TCR_T0SZ(VA_BITS) // default T0SZ small enough? - b.ge 1f // .. then skip additional level + b.ge 1f // .. then skip VA range extension adr_l x6, idmap_t0sz str x5, [x6] dmb sy dc ivac, x6 // Invalidate potentially stale cache line - create_table_entry x0, x3, EXTRA_SHIFT, EXTRA_PTRS, x5, x6 -1: +#if (VA_BITS < 48) +#define EXTRA_SHIFT (PGDIR_SHIFT + PAGE_SHIFT - 3) +#define EXTRA_PTRS (1 << (PHYS_MASK_SHIFT - EXTRA_SHIFT)) + + /* + * If VA_BITS < 48, we have to configure an additional table level. + * First, we have to verify our assumption that the current value of + * VA_BITS was chosen such that all translation levels are fully + * utilised, and that lowering T0SZ will always result in an additional + * translation level to be configured. + */ +#if VA_BITS != EXTRA_SHIFT +#error "Mismatch between VA_BITS and page size/number of translation levels" #endif - create_pgd_entry x0, x3, x5, x6 + mov x4, EXTRA_PTRS + create_table_entry x0, x3, EXTRA_SHIFT, x4, x5, x6 +#else + /* + * If VA_BITS == 48, we don't have to configure an additional + * translation level, but the top-level table has more entries. + */ + mov x4, #1 << (PHYS_MASK_SHIFT - PGDIR_SHIFT) + str_l x4, idmap_ptrs_per_pgd, x5 +#endif +1: + ldr_l x4, idmap_ptrs_per_pgd mov x5, x3 // __pa(__idmap_text_start) adr_l x6, __idmap_text_end // __pa(__idmap_text_end) - create_block_map x0, x7, x3, x5, x6 + + map_memory x0, x1, x3, x6, x7, x3, x4, x10, x11, x12, x13, x14 /* * Map the kernel image (starting with PHYS_OFFSET). @@ -294,12 +396,13 @@ __create_page_tables: adrp x0, swapper_pg_dir mov_q x5, KIMAGE_VADDR + TEXT_OFFSET // compile time __va(_text) add x5, x5, x23 // add KASLR displacement - create_pgd_entry x0, x5, x3, x6 + mov x4, PTRS_PER_PGD adrp x6, _end // runtime __pa(_end) adrp x3, _text // runtime __pa(_text) sub x6, x6, x3 // _end - _text add x6, x6, x5 // runtime __va(_end) - create_block_map x0, x7, x3, x5, x6 + + map_memory x0, x1, x5, x6, x7, x3, x4, x10, x11, x12, x13, x14 /* * Since the page tables have been populated with non-cacheable @@ -307,7 +410,8 @@ __create_page_tables: * tables again to remove any speculatively loaded cache lines. */ adrp x0, idmap_pg_dir - ldr x1, =(IDMAP_DIR_SIZE + SWAPPER_DIR_SIZE + RESERVED_TTBR0_SIZE) + adrp x1, swapper_pg_end + sub x1, x1, x0 dmb sy bl __inval_dcache_area @@ -388,17 +492,13 @@ ENTRY(el2_setup) mrs x0, CurrentEL cmp x0, #CurrentEL_EL2 b.eq 1f - mrs x0, sctlr_el1 -CPU_BE( orr x0, x0, #(3 << 24) ) // Set the EE and E0E bits for EL1 -CPU_LE( bic x0, x0, #(3 << 24) ) // Clear the EE and E0E bits for EL1 + mov_q x0, (SCTLR_EL1_RES1 | ENDIAN_SET_EL1) msr sctlr_el1, x0 mov w0, #BOOT_CPU_MODE_EL1 // This cpu booted in EL1 isb ret -1: mrs x0, sctlr_el2 -CPU_BE( orr x0, x0, #(1 << 25) ) // Set the EE bit for EL2 -CPU_LE( bic x0, x0, #(1 << 25) ) // Clear the EE bit for EL2 +1: mov_q x0, (SCTLR_EL2_RES1 | ENDIAN_SET_EL2) msr sctlr_el2, x0 #ifdef CONFIG_ARM64_VHE @@ -514,10 +614,7 @@ install_el2_stub: * requires no configuration, and all non-hyp-specific EL2 setup * will be done via the _EL1 system register aliases in __cpu_setup. */ - /* sctlr_el1 */ - mov x0, #0x0800 // Set/clear RES{1,0} bits -CPU_BE( movk x0, #0x33d0, lsl #16 ) // Set EE and E0E on BE systems -CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems + mov_q x0, (SCTLR_EL1_RES1 | ENDIAN_SET_EL1) msr sctlr_el1, x0 /* Coprocessor traps. */ @@ -679,8 +776,10 @@ ENTRY(__enable_mmu) update_early_cpu_boot_status 0, x1, x2 adrp x1, idmap_pg_dir adrp x2, swapper_pg_dir - msr ttbr0_el1, x1 // load TTBR0 - msr ttbr1_el1, x2 // load TTBR1 + phys_to_ttbr x1, x3 + phys_to_ttbr x2, x4 + msr ttbr0_el1, x3 // load TTBR0 + msr ttbr1_el1, x4 // load TTBR1 isb msr sctlr_el1, x0 isb diff --git a/arch/arm64/kernel/hibernate-asm.S b/arch/arm64/kernel/hibernate-asm.S index e56d848b6466..84f5d52fddda 100644 --- a/arch/arm64/kernel/hibernate-asm.S +++ b/arch/arm64/kernel/hibernate-asm.S @@ -33,12 +33,14 @@ * Even switching to our copied tables will cause a changed output address at * each stage of the walk. */ -.macro break_before_make_ttbr_switch zero_page, page_table - msr ttbr1_el1, \zero_page +.macro break_before_make_ttbr_switch zero_page, page_table, tmp + phys_to_ttbr \zero_page, \tmp + msr ttbr1_el1, \tmp isb tlbi vmalle1 dsb nsh - msr ttbr1_el1, \page_table + phys_to_ttbr \page_table, \tmp + msr ttbr1_el1, \tmp isb .endm @@ -78,7 +80,7 @@ ENTRY(swsusp_arch_suspend_exit) * We execute from ttbr0, change ttbr1 to our copied linear map tables * with a break-before-make via the zero page */ - break_before_make_ttbr_switch x5, x0 + break_before_make_ttbr_switch x5, x0, x6 mov x21, x1 mov x30, x2 @@ -109,7 +111,7 @@ ENTRY(swsusp_arch_suspend_exit) dsb ish /* wait for PoU cleaning to finish */ /* switch to the restored kernels page tables */ - break_before_make_ttbr_switch x25, x21 + break_before_make_ttbr_switch x25, x21, x6 ic ialluis dsb ish diff --git a/arch/arm64/kernel/hibernate.c b/arch/arm64/kernel/hibernate.c index 3009b8b80f08..f20cf7e99249 100644 --- a/arch/arm64/kernel/hibernate.c +++ b/arch/arm64/kernel/hibernate.c @@ -247,8 +247,7 @@ static int create_safe_exec_page(void *src_start, size_t length, } pte = pte_offset_kernel(pmd, dst_addr); - set_pte(pte, __pte(virt_to_phys((void *)dst) | - pgprot_val(PAGE_KERNEL_EXEC))); + set_pte(pte, pfn_pte(virt_to_pfn(dst), PAGE_KERNEL_EXEC)); /* * Load our new page tables. A strict BBM approach requires that we @@ -264,7 +263,7 @@ static int create_safe_exec_page(void *src_start, size_t length, */ cpu_set_reserved_ttbr0(); local_flush_tlb_all(); - write_sysreg(virt_to_phys(pgd), ttbr0_el1); + write_sysreg(phys_to_ttbr(virt_to_phys(pgd)), ttbr0_el1); isb(); *phys_dst_addr = virt_to_phys((void *)dst); diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c index 713561e5bcab..60e5fc661f74 100644 --- a/arch/arm64/kernel/irq.c +++ b/arch/arm64/kernel/irq.c @@ -29,6 +29,7 @@ #include <linux/irqchip.h> #include <linux/seq_file.h> #include <linux/vmalloc.h> +#include <asm/vmap_stack.h> unsigned long irq_err_count; @@ -58,17 +59,7 @@ static void init_irq_stacks(void) unsigned long *p; for_each_possible_cpu(cpu) { - /* - * To ensure that VMAP'd stack overflow detection works - * correctly, the IRQ stacks need to have the same - * alignment as other stacks. - */ - p = __vmalloc_node_range(IRQ_STACK_SIZE, THREAD_ALIGN, - VMALLOC_START, VMALLOC_END, - THREADINFO_GFP, PAGE_KERNEL, - 0, cpu_to_node(cpu), - __builtin_return_address(0)); - + p = arch_alloc_vmap_stack(IRQ_STACK_SIZE, cpu_to_node(cpu)); per_cpu(irq_stack_ptr, cpu) = p; } } diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c index 3affca3dd96a..75b220ba73a3 100644 --- a/arch/arm64/kernel/perf_event.c +++ b/arch/arm64/kernel/perf_event.c @@ -925,9 +925,8 @@ static void __armv8pmu_probe_pmu(void *info) pmceid[0] = read_sysreg(pmceid0_el0); pmceid[1] = read_sysreg(pmceid1_el0); - bitmap_from_u32array(cpu_pmu->pmceid_bitmap, - ARMV8_PMUV3_MAX_COMMON_EVENTS, pmceid, - ARRAY_SIZE(pmceid)); + bitmap_from_arr32(cpu_pmu->pmceid_bitmap, + pmceid, ARMV8_PMUV3_MAX_COMMON_EVENTS); } static int armv8pmu_probe_pmu(struct arm_pmu *cpu_pmu) diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 6b7dcf4310ac..ad8aeb098b31 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -35,7 +35,6 @@ #include <linux/delay.h> #include <linux/reboot.h> #include <linux/interrupt.h> -#include <linux/kallsyms.h> #include <linux/init.h> #include <linux/cpu.h> #include <linux/elfcore.h> @@ -221,8 +220,8 @@ void __show_regs(struct pt_regs *regs) show_regs_print_info(KERN_DEFAULT); print_pstate(regs); - print_symbol("pc : %s\n", regs->pc); - print_symbol("lr : %s\n", lr); + printk("pc : %pS\n", (void *)regs->pc); + printk("lr : %pS\n", (void *)lr); printk("sp : %016llx\n", sp); i = top_reg; @@ -370,16 +369,14 @@ void tls_preserve_current_state(void) static void tls_thread_switch(struct task_struct *next) { - unsigned long tpidr, tpidrro; - tls_preserve_current_state(); - tpidr = *task_user_tls(next); - tpidrro = is_compat_thread(task_thread_info(next)) ? - next->thread.tp_value : 0; + if (is_compat_thread(task_thread_info(next))) + write_sysreg(next->thread.tp_value, tpidrro_el0); + else if (!arm64_kernel_unmapped_at_el0()) + write_sysreg(0, tpidrro_el0); - write_sysreg(tpidr, tpidr_el0); - write_sysreg(tpidrro, tpidrro_el0); + write_sysreg(*task_user_tls(next), tpidr_el0); } /* Restore the UAO state depending on next's addr_limit */ diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 7c44658b316d..6618036ae6d4 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -180,34 +180,34 @@ static void ptrace_hbptriggered(struct perf_event *bp, struct pt_regs *regs) { struct arch_hw_breakpoint *bkpt = counter_arch_bp(bp); - siginfo_t info = { - .si_signo = SIGTRAP, - .si_errno = 0, - .si_code = TRAP_HWBKPT, - .si_addr = (void __user *)(bkpt->trigger), - }; + siginfo_t info; -#ifdef CONFIG_COMPAT - int i; + clear_siginfo(&info); + info.si_signo = SIGTRAP; + info.si_errno = 0; + info.si_code = TRAP_HWBKPT; + info.si_addr = (void __user *)(bkpt->trigger); - if (!is_compat_task()) - goto send_sig; +#ifdef CONFIG_COMPAT + if (is_compat_task()) { + int si_errno = 0; + int i; - for (i = 0; i < ARM_MAX_BRP; ++i) { - if (current->thread.debug.hbp_break[i] == bp) { - info.si_errno = (i << 1) + 1; - break; + for (i = 0; i < ARM_MAX_BRP; ++i) { + if (current->thread.debug.hbp_break[i] == bp) { + si_errno = (i << 1) + 1; + break; + } } - } - for (i = 0; i < ARM_MAX_WRP; ++i) { - if (current->thread.debug.hbp_watch[i] == bp) { - info.si_errno = -((i << 1) + 1); - break; + for (i = 0; i < ARM_MAX_WRP; ++i) { + if (current->thread.debug.hbp_watch[i] == bp) { + si_errno = -((i << 1) + 1); + break; + } } + force_sig_ptrace_errno_trap(si_errno, (void __user *)bkpt->trigger); } - -send_sig: #endif force_sig_info(SIGTRAP, &info, current); } diff --git a/arch/arm64/kernel/sdei.c b/arch/arm64/kernel/sdei.c new file mode 100644 index 000000000000..6b8d90d5ceae --- /dev/null +++ b/arch/arm64/kernel/sdei.c @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2017 Arm Ltd. +#define pr_fmt(fmt) "sdei: " fmt + +#include <linux/arm_sdei.h> +#include <linux/hardirq.h> +#include <linux/irqflags.h> +#include <linux/sched/task_stack.h> +#include <linux/uaccess.h> + +#include <asm/alternative.h> +#include <asm/kprobes.h> +#include <asm/mmu.h> +#include <asm/ptrace.h> +#include <asm/sections.h> +#include <asm/sysreg.h> +#include <asm/vmap_stack.h> + +unsigned long sdei_exit_mode; + +/* + * VMAP'd stacks checking for stack overflow on exception using sp as a scratch + * register, meaning SDEI has to switch to its own stack. We need two stacks as + * a critical event may interrupt a normal event that has just taken a + * synchronous exception, and is using sp as scratch register. For a critical + * event interrupting a normal event, we can't reliably tell if we were on the + * sdei stack. + * For now, we allocate stacks when the driver is probed. + */ +DECLARE_PER_CPU(unsigned long *, sdei_stack_normal_ptr); +DECLARE_PER_CPU(unsigned long *, sdei_stack_critical_ptr); + +#ifdef CONFIG_VMAP_STACK +DEFINE_PER_CPU(unsigned long *, sdei_stack_normal_ptr); +DEFINE_PER_CPU(unsigned long *, sdei_stack_critical_ptr); +#endif + +static void _free_sdei_stack(unsigned long * __percpu *ptr, int cpu) +{ + unsigned long *p; + + p = per_cpu(*ptr, cpu); + if (p) { + per_cpu(*ptr, cpu) = NULL; + vfree(p); + } +} + +static void free_sdei_stacks(void) +{ + int cpu; + + for_each_possible_cpu(cpu) { + _free_sdei_stack(&sdei_stack_normal_ptr, cpu); + _free_sdei_stack(&sdei_stack_critical_ptr, cpu); + } +} + +static int _init_sdei_stack(unsigned long * __percpu *ptr, int cpu) +{ + unsigned long *p; + + p = arch_alloc_vmap_stack(SDEI_STACK_SIZE, cpu_to_node(cpu)); + if (!p) + return -ENOMEM; + per_cpu(*ptr, cpu) = p; + + return 0; +} + +static int init_sdei_stacks(void) +{ + int cpu; + int err = 0; + + for_each_possible_cpu(cpu) { + err = _init_sdei_stack(&sdei_stack_normal_ptr, cpu); + if (err) + break; + err = _init_sdei_stack(&sdei_stack_critical_ptr, cpu); + if (err) + break; + } + + if (err) + free_sdei_stacks(); + + return err; +} + +bool _on_sdei_stack(unsigned long sp) +{ + unsigned long low, high; + + if (!IS_ENABLED(CONFIG_VMAP_STACK)) + return false; + + low = (unsigned long)raw_cpu_read(sdei_stack_critical_ptr); + high = low + SDEI_STACK_SIZE; + + if (low <= sp && sp < high) + return true; + + low = (unsigned long)raw_cpu_read(sdei_stack_normal_ptr); + high = low + SDEI_STACK_SIZE; + + return (low <= sp && sp < high); +} + +unsigned long sdei_arch_get_entry_point(int conduit) +{ + /* + * SDEI works between adjacent exception levels. If we booted at EL1 we + * assume a hypervisor is marshalling events. If we booted at EL2 and + * dropped to EL1 because we don't support VHE, then we can't support + * SDEI. + */ + if (is_hyp_mode_available() && !is_kernel_in_hyp_mode()) { + pr_err("Not supported on this hardware/boot configuration\n"); + return 0; + } + + if (IS_ENABLED(CONFIG_VMAP_STACK)) { + if (init_sdei_stacks()) + return 0; + } + + sdei_exit_mode = (conduit == CONDUIT_HVC) ? SDEI_EXIT_HVC : SDEI_EXIT_SMC; + +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 + if (arm64_kernel_unmapped_at_el0()) { + unsigned long offset; + + offset = (unsigned long)__sdei_asm_entry_trampoline - + (unsigned long)__entry_tramp_text_start; + return TRAMP_VALIAS + offset; + } else +#endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */ + return (unsigned long)__sdei_asm_handler; + +} + +/* + * __sdei_handler() returns one of: + * SDEI_EV_HANDLED - success, return to the interrupted context. + * SDEI_EV_FAILED - failure, return this error code to firmare. + * virtual-address - success, return to this address. + */ +static __kprobes unsigned long _sdei_handler(struct pt_regs *regs, + struct sdei_registered_event *arg) +{ + u32 mode; + int i, err = 0; + int clobbered_registers = 4; + u64 elr = read_sysreg(elr_el1); + u32 kernel_mode = read_sysreg(CurrentEL) | 1; /* +SPSel */ + unsigned long vbar = read_sysreg(vbar_el1); + + if (arm64_kernel_unmapped_at_el0()) + clobbered_registers++; + + /* Retrieve the missing registers values */ + for (i = 0; i < clobbered_registers; i++) { + /* from within the handler, this call always succeeds */ + sdei_api_event_context(i, ®s->regs[i]); + } + + /* + * We didn't take an exception to get here, set PAN. UAO will be cleared + * by sdei_event_handler()s set_fs(USER_DS) call. + */ + __uaccess_enable_hw_pan(); + + err = sdei_event_handler(regs, arg); + if (err) + return SDEI_EV_FAILED; + + if (elr != read_sysreg(elr_el1)) { + /* + * We took a synchronous exception from the SDEI handler. + * This could deadlock, and if you interrupt KVM it will + * hyp-panic instead. + */ + pr_warn("unsafe: exception during handler\n"); + } + + mode = regs->pstate & (PSR_MODE32_BIT | PSR_MODE_MASK); + + /* + * If we interrupted the kernel with interrupts masked, we always go + * back to wherever we came from. + */ + if (mode == kernel_mode && !interrupts_enabled(regs)) + return SDEI_EV_HANDLED; + + /* + * Otherwise, we pretend this was an IRQ. This lets user space tasks + * receive signals before we return to them, and KVM to invoke it's + * world switch to do the same. + * + * See DDI0487B.a Table D1-7 'Vector offsets from vector table base + * address'. + */ + if (mode == kernel_mode) + return vbar + 0x280; + else if (mode & PSR_MODE32_BIT) + return vbar + 0x680; + + return vbar + 0x480; +} + + +asmlinkage __kprobes notrace unsigned long +__sdei_handler(struct pt_regs *regs, struct sdei_registered_event *arg) +{ + unsigned long ret; + bool do_nmi_exit = false; + + /* + * nmi_enter() deals with printk() re-entrance and use of RCU when + * RCU believed this CPU was idle. Because critical events can + * interrupt normal events, we may already be in_nmi(). + */ + if (!in_nmi()) { + nmi_enter(); + do_nmi_exit = true; + } + + ret = _sdei_handler(regs, arg); + + if (do_nmi_exit) + nmi_exit(); + + return ret; +} diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c index b120111a46be..f60c052e8d1c 100644 --- a/arch/arm64/kernel/signal.c +++ b/arch/arm64/kernel/signal.c @@ -178,7 +178,8 @@ static void __user *apply_user_offset( static int preserve_fpsimd_context(struct fpsimd_context __user *ctx) { - struct fpsimd_state *fpsimd = ¤t->thread.fpsimd_state; + struct user_fpsimd_state const *fpsimd = + ¤t->thread.fpsimd_state.user_fpsimd; int err; /* copy the FP and status/control registers */ @@ -195,7 +196,7 @@ static int preserve_fpsimd_context(struct fpsimd_context __user *ctx) static int restore_fpsimd_context(struct fpsimd_context __user *ctx) { - struct fpsimd_state fpsimd; + struct user_fpsimd_state fpsimd; __u32 magic, size; int err = 0; @@ -266,7 +267,7 @@ static int restore_sve_fpsimd_context(struct user_ctxs *user) { int err; unsigned int vq; - struct fpsimd_state fpsimd; + struct user_fpsimd_state fpsimd; struct sve_context sve; if (__copy_from_user(&sve, user->sve, sizeof(sve))) diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c index 22711ee8e36c..79feb861929b 100644 --- a/arch/arm64/kernel/signal32.c +++ b/arch/arm64/kernel/signal32.c @@ -125,86 +125,6 @@ static inline int get_sigset_t(sigset_t *set, return 0; } -int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from) -{ - int err; - - if (!access_ok(VERIFY_WRITE, to, sizeof(*to))) - return -EFAULT; - - /* If you change siginfo_t structure, please be sure - * this code is fixed accordingly. - * It should never copy any pad contained in the structure - * to avoid security leaks, but must copy the generic - * 3 ints plus the relevant union member. - * This routine must convert siginfo from 64bit to 32bit as well - * at the same time. - */ - err = __put_user(from->si_signo, &to->si_signo); - err |= __put_user(from->si_errno, &to->si_errno); - err |= __put_user(from->si_code, &to->si_code); - if (from->si_code < 0) - err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, - SI_PAD_SIZE); - else switch (siginfo_layout(from->si_signo, from->si_code)) { - case SIL_KILL: - err |= __put_user(from->si_pid, &to->si_pid); - err |= __put_user(from->si_uid, &to->si_uid); - break; - case SIL_TIMER: - err |= __put_user(from->si_tid, &to->si_tid); - err |= __put_user(from->si_overrun, &to->si_overrun); - err |= __put_user(from->si_int, &to->si_int); - break; - case SIL_POLL: - err |= __put_user(from->si_band, &to->si_band); - err |= __put_user(from->si_fd, &to->si_fd); - break; - case SIL_FAULT: - err |= __put_user((compat_uptr_t)(unsigned long)from->si_addr, - &to->si_addr); -#ifdef BUS_MCEERR_AO - /* - * Other callers might not initialize the si_lsb field, - * so check explicitly for the right codes here. - */ - if (from->si_signo == SIGBUS && - (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO)) - err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb); -#endif - break; - case SIL_CHLD: - err |= __put_user(from->si_pid, &to->si_pid); - err |= __put_user(from->si_uid, &to->si_uid); - err |= __put_user(from->si_status, &to->si_status); - err |= __put_user(from->si_utime, &to->si_utime); - err |= __put_user(from->si_stime, &to->si_stime); - break; - case SIL_RT: - err |= __put_user(from->si_pid, &to->si_pid); - err |= __put_user(from->si_uid, &to->si_uid); - err |= __put_user(from->si_int, &to->si_int); - break; - case SIL_SYS: - err |= __put_user((compat_uptr_t)(unsigned long) - from->si_call_addr, &to->si_call_addr); - err |= __put_user(from->si_syscall, &to->si_syscall); - err |= __put_user(from->si_arch, &to->si_arch); - break; - } - return err; -} - -int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from) -{ - if (copy_from_user(to, from, __ARCH_SI_PREAMBLE_SIZE) || - copy_from_user(to->_sifields._pad, - from->_sifields._pad, SI_PAD_SIZE)) - return -EFAULT; - - return 0; -} - /* * VFP save/restore code. * @@ -228,7 +148,8 @@ union __fpsimd_vreg { static int compat_preserve_vfp_context(struct compat_vfp_sigframe __user *frame) { - struct fpsimd_state *fpsimd = ¤t->thread.fpsimd_state; + struct user_fpsimd_state const *fpsimd = + ¤t->thread.fpsimd_state.user_fpsimd; compat_ulong_t magic = VFP_MAGIC; compat_ulong_t size = VFP_STORAGE_SIZE; compat_ulong_t fpscr, fpexc; @@ -277,7 +198,7 @@ static int compat_preserve_vfp_context(struct compat_vfp_sigframe __user *frame) static int compat_restore_vfp_context(struct compat_vfp_sigframe __user *frame) { - struct fpsimd_state fpsimd; + struct user_fpsimd_state fpsimd; compat_ulong_t magic = VFP_MAGIC; compat_ulong_t size = VFP_STORAGE_SIZE; compat_ulong_t fpscr; diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index 551eb07c53b6..3b8ad7be9c33 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -18,6 +18,7 @@ */ #include <linux/acpi.h> +#include <linux/arm_sdei.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/spinlock.h> @@ -836,6 +837,7 @@ static void ipi_cpu_stop(unsigned int cpu) set_cpu_online(cpu, false); local_daif_mask(); + sdei_mask_local_cpu(); while (1) cpu_relax(); @@ -853,6 +855,7 @@ static void ipi_cpu_crash_stop(unsigned int cpu, struct pt_regs *regs) atomic_dec(&waiting_for_crash_ipi); local_irq_disable(); + sdei_mask_local_cpu(); #ifdef CONFIG_HOTPLUG_CPU if (cpu_ops[cpu]->cpu_die) @@ -972,6 +975,8 @@ void smp_send_stop(void) if (num_online_cpus() > 1) pr_warning("SMP: failed to stop secondary CPUs %*pbl\n", cpumask_pr_args(cpu_online_mask)); + + sdei_mask_local_cpu(); } #ifdef CONFIG_KEXEC_CORE @@ -990,8 +995,10 @@ void crash_smp_send_stop(void) cpus_stopped = 1; - if (num_online_cpus() == 1) + if (num_online_cpus() == 1) { + sdei_mask_local_cpu(); return; + } cpumask_copy(&mask, cpu_online_mask); cpumask_clear_cpu(smp_processor_id(), &mask); @@ -1009,6 +1016,8 @@ void crash_smp_send_stop(void) if (atomic_read(&waiting_for_crash_ipi) > 0) pr_warning("SMP: failed to stop secondary CPUs %*pbl\n", cpumask_pr_args(&mask)); + + sdei_mask_local_cpu(); } bool smp_crash_stop_failed(void) diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c index 3fe5ad884418..a307b9e13392 100644 --- a/arch/arm64/kernel/suspend.c +++ b/arch/arm64/kernel/suspend.c @@ -2,6 +2,7 @@ #include <linux/ftrace.h> #include <linux/percpu.h> #include <linux/slab.h> +#include <linux/uaccess.h> #include <asm/alternative.h> #include <asm/cacheflush.h> #include <asm/cpufeature.h> @@ -51,8 +52,7 @@ void notrace __cpu_suspend_exit(void) * PSTATE was not saved over suspend/resume, re-enable any detected * features that might not have been set correctly. */ - asm(ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, - CONFIG_ARM64_PAN)); + __uaccess_enable_hw_pan(); uao_thread_switch(current); /* diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c index 8d48b233e6ce..21868530018e 100644 --- a/arch/arm64/kernel/topology.c +++ b/arch/arm64/kernel/topology.c @@ -37,18 +37,14 @@ static int __init get_cpu_for_node(struct device_node *node) if (!cpu_node) return -1; - for_each_possible_cpu(cpu) { - if (of_get_cpu_node(cpu, NULL) == cpu_node) { - topology_parse_cpu_capacity(cpu_node, cpu); - of_node_put(cpu_node); - return cpu; - } - } - - pr_crit("Unable to find CPU node for %pOF\n", cpu_node); + cpu = of_cpu_node_to_id(cpu_node); + if (cpu >= 0) + topology_parse_cpu_capacity(cpu_node, cpu); + else + pr_crit("Unable to find CPU node for %pOF\n", cpu_node); of_node_put(cpu_node); - return -1; + return cpu; } static int __init parse_core(struct device_node *core, int cluster_id, diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index 3d3588fcd1c7..bbb0fde2780e 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -662,17 +662,58 @@ asmlinkage void handle_bad_stack(struct pt_regs *regs) } #endif -asmlinkage void do_serror(struct pt_regs *regs, unsigned int esr) +void __noreturn arm64_serror_panic(struct pt_regs *regs, u32 esr) { - nmi_enter(); - console_verbose(); pr_crit("SError Interrupt on CPU%d, code 0x%08x -- %s\n", smp_processor_id(), esr, esr_get_class_string(esr)); - __show_regs(regs); + if (regs) + __show_regs(regs); + + nmi_panic(regs, "Asynchronous SError Interrupt"); + + cpu_park_loop(); + unreachable(); +} + +bool arm64_is_fatal_ras_serror(struct pt_regs *regs, unsigned int esr) +{ + u32 aet = arm64_ras_serror_get_severity(esr); + + switch (aet) { + case ESR_ELx_AET_CE: /* corrected error */ + case ESR_ELx_AET_UEO: /* restartable, not yet consumed */ + /* + * The CPU can make progress. We may take UEO again as + * a more severe error. + */ + return false; + + case ESR_ELx_AET_UEU: /* Uncorrected Unrecoverable */ + case ESR_ELx_AET_UER: /* Uncorrected Recoverable */ + /* + * The CPU can't make progress. The exception may have + * been imprecise. + */ + return true; + + case ESR_ELx_AET_UC: /* Uncontainable or Uncategorized error */ + default: + /* Error has been silently propagated */ + arm64_serror_panic(regs, esr); + } +} + +asmlinkage void do_serror(struct pt_regs *regs, unsigned int esr) +{ + nmi_enter(); + + /* non-RAS errors are not containable */ + if (!arm64_is_ras_serror(esr) || arm64_is_fatal_ras_serror(regs, esr)) + arm64_serror_panic(regs, esr); - panic("Asynchronous SError Interrupt"); + nmi_exit(); } void __pte_error(const char *file, int line, unsigned long val) diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S index 7da3e5c366a0..0221aca6493d 100644 --- a/arch/arm64/kernel/vmlinux.lds.S +++ b/arch/arm64/kernel/vmlinux.lds.S @@ -57,6 +57,17 @@ jiffies = jiffies_64; #define HIBERNATE_TEXT #endif +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 +#define TRAMP_TEXT \ + . = ALIGN(PAGE_SIZE); \ + VMLINUX_SYMBOL(__entry_tramp_text_start) = .; \ + *(.entry.tramp.text) \ + . = ALIGN(PAGE_SIZE); \ + VMLINUX_SYMBOL(__entry_tramp_text_end) = .; +#else +#define TRAMP_TEXT +#endif + /* * The size of the PE/COFF section that covers the kernel image, which * runs from stext to _edata, must be a round multiple of the PE/COFF @@ -113,6 +124,7 @@ SECTIONS HYPERVISOR_TEXT IDMAP_TEXT HIBERNATE_TEXT + TRAMP_TEXT *(.fixup) *(.gnu.warning) . = ALIGN(16); @@ -206,13 +218,19 @@ SECTIONS . = ALIGN(PAGE_SIZE); idmap_pg_dir = .; . += IDMAP_DIR_SIZE; - swapper_pg_dir = .; - . += SWAPPER_DIR_SIZE; + +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 + tramp_pg_dir = .; + . += PAGE_SIZE; +#endif #ifdef CONFIG_ARM64_SW_TTBR0_PAN reserved_ttbr0 = .; . += RESERVED_TTBR0_SIZE; #endif + swapper_pg_dir = .; + . += SWAPPER_DIR_SIZE; + swapper_pg_end = .; __pecoff_data_size = ABSOLUTE(. - __initdata_begin); _end = .; @@ -234,7 +252,10 @@ ASSERT(__idmap_text_end - (__idmap_text_start & ~(SZ_4K - 1)) <= SZ_4K, ASSERT(__hibernate_exit_text_end - (__hibernate_exit_text_start & ~(SZ_4K - 1)) <= SZ_4K, "Hibernate exit text too big or misaligned") #endif - +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 +ASSERT((__entry_tramp_text_end - __entry_tramp_text_start) == PAGE_SIZE, + "Entry trampoline text too big") +#endif /* * If padding is applied before .head.text, virt<->phys conversions will fail. */ diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c index e60494f1eef9..520b0dad3c62 100644 --- a/arch/arm64/kvm/handle_exit.c +++ b/arch/arm64/kvm/handle_exit.c @@ -23,18 +23,26 @@ #include <linux/kvm_host.h> #include <asm/esr.h> +#include <asm/exception.h> #include <asm/kvm_asm.h> #include <asm/kvm_coproc.h> #include <asm/kvm_emulate.h> #include <asm/kvm_mmu.h> #include <asm/kvm_psci.h> #include <asm/debug-monitors.h> +#include <asm/traps.h> #define CREATE_TRACE_POINTS #include "trace.h" typedef int (*exit_handle_fn)(struct kvm_vcpu *, struct kvm_run *); +static void kvm_handle_guest_serror(struct kvm_vcpu *vcpu, u32 esr) +{ + if (!arm64_is_ras_serror(esr) || arm64_is_fatal_ras_serror(NULL, esr)) + kvm_inject_vabt(vcpu); +} + static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run) { int ret; @@ -242,7 +250,6 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, *vcpu_pc(vcpu) -= adj; } - kvm_inject_vabt(vcpu); return 1; } @@ -252,7 +259,6 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, case ARM_EXCEPTION_IRQ: return 1; case ARM_EXCEPTION_EL1_SERROR: - kvm_inject_vabt(vcpu); /* We may still need to return for single-step */ if (!(*vcpu_cpsr(vcpu) & DBG_SPSR_SS) && kvm_arm_handle_step_debug(vcpu, run)) @@ -275,3 +281,25 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, return 0; } } + +/* For exit types that need handling before we can be preempted */ +void handle_exit_early(struct kvm_vcpu *vcpu, struct kvm_run *run, + int exception_index) +{ + if (ARM_SERROR_PENDING(exception_index)) { + if (this_cpu_has_cap(ARM64_HAS_RAS_EXTN)) { + u64 disr = kvm_vcpu_get_disr(vcpu); + + kvm_handle_guest_serror(vcpu, disr_to_esr(disr)); + } else { + kvm_inject_vabt(vcpu); + } + + return; + } + + exception_index = ARM_EXCEPTION_CODE(exception_index); + + if (exception_index == ARM_EXCEPTION_EL1_SERROR) + kvm_handle_guest_serror(vcpu, kvm_vcpu_get_hsr(vcpu)); +} diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S index 870828c364c5..e086c6eff8c6 100644 --- a/arch/arm64/kvm/hyp-init.S +++ b/arch/arm64/kvm/hyp-init.S @@ -63,7 +63,8 @@ __do_hyp_init: cmp x0, #HVC_STUB_HCALL_NR b.lo __kvm_handle_stub_hvc - msr ttbr0_el2, x0 + phys_to_ttbr x0, x4 + msr ttbr0_el2, x4 mrs x4, tcr_el1 ldr x5, =TCR_EL2_MASK @@ -71,30 +72,27 @@ __do_hyp_init: mov x5, #TCR_EL2_RES1 orr x4, x4, x5 -#ifndef CONFIG_ARM64_VA_BITS_48 /* - * If we are running with VA_BITS < 48, we may be running with an extra - * level of translation in the ID map. This is only the case if system - * RAM is out of range for the currently configured page size and number - * of translation levels, in which case we will also need the extra - * level for the HYP ID map, or we won't be able to enable the EL2 MMU. + * The ID map may be configured to use an extended virtual address + * range. This is only the case if system RAM is out of range for the + * currently configured page size and VA_BITS, in which case we will + * also need the extended virtual range for the HYP ID map, or we won't + * be able to enable the EL2 MMU. * * However, at EL2, there is only one TTBR register, and we can't switch * between translation tables *and* update TCR_EL2.T0SZ at the same - * time. Bottom line: we need the extra level in *both* our translation - * tables. + * time. Bottom line: we need to use the extended range with *both* our + * translation tables. * * So use the same T0SZ value we use for the ID map. */ ldr_l x5, idmap_t0sz bfi x4, x5, TCR_T0SZ_OFFSET, TCR_TxSZ_WIDTH -#endif + /* - * Read the PARange bits from ID_AA64MMFR0_EL1 and set the PS bits in - * TCR_EL2. + * Set the PS bits in TCR_EL2. */ - mrs x5, ID_AA64MMFR0_EL1 - bfi x4, x5, #16, #3 + tcr_compute_pa_size x4, #TCR_EL2_PS_SHIFT, x5, x6 msr tcr_el2, x4 @@ -122,6 +120,10 @@ CPU_BE( orr x4, x4, #SCTLR_ELx_EE) kern_hyp_va x2 msr vbar_el2, x2 + /* copy tpidr_el1 into tpidr_el2 for use by HYP */ + mrs x1, tpidr_el1 + msr tpidr_el2, x1 + /* Hello, World! */ eret ENDPROC(__kvm_hyp_init) diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S index 12ee62d6d410..fdd1068ee3a5 100644 --- a/arch/arm64/kvm/hyp/entry.S +++ b/arch/arm64/kvm/hyp/entry.S @@ -62,8 +62,8 @@ ENTRY(__guest_enter) // Store the host regs save_callee_saved_regs x1 - // Store the host_ctxt for use at exit time - str x1, [sp, #-16]! + // Store host_ctxt and vcpu for use at exit time + stp x1, x0, [sp, #-16]! add x18, x0, #VCPU_CONTEXT @@ -124,6 +124,17 @@ ENTRY(__guest_exit) // Now restore the host regs restore_callee_saved_regs x2 +alternative_if ARM64_HAS_RAS_EXTN + // If we have the RAS extensions we can consume a pending error + // without an unmask-SError and isb. + esb + mrs_s x2, SYS_DISR_EL1 + str x2, [x1, #(VCPU_FAULT_DISR - VCPU_CONTEXT)] + cbz x2, 1f + msr_s SYS_DISR_EL1, xzr + orr x0, x0, #(1<<ARM_EXIT_WITH_SERROR_BIT) +1: ret +alternative_else // If we have a pending asynchronous abort, now is the // time to find out. From your VAXorcist book, page 666: // "Threaten me not, oh Evil one! For I speak with @@ -134,7 +145,9 @@ ENTRY(__guest_exit) mov x5, x0 dsb sy // Synchronize against in-flight ld/st + nop msr daifclr, #4 // Unmask aborts +alternative_endif // This is our single instruction exception window. A pending // SError is guaranteed to occur at the earliest when we unmask @@ -159,6 +172,10 @@ abort_guest_exit_end: ENDPROC(__guest_exit) ENTRY(__fpsimd_guest_restore) + // x0: esr + // x1: vcpu + // x2-x29,lr: vcpu regs + // vcpu x0-x1 on the stack stp x2, x3, [sp, #-16]! stp x4, lr, [sp, #-16]! @@ -173,7 +190,7 @@ alternative_else alternative_endif isb - mrs x3, tpidr_el2 + mov x3, x1 ldr x0, [x3, #VCPU_HOST_CONTEXT] kern_hyp_va x0 @@ -196,3 +213,15 @@ alternative_endif eret ENDPROC(__fpsimd_guest_restore) + +ENTRY(__qcom_hyp_sanitize_btac_predictors) + /** + * Call SMC64 with Silicon provider serviceID 23<<8 (0xc2001700) + * 0xC2000000-0xC200FFFF: assigned to SiP Service Calls + * b15-b0: contains SiP functionID + */ + movz x0, #0x1700 + movk x0, #0xc200, lsl #16 + smc #0 + ret +ENDPROC(__qcom_hyp_sanitize_btac_predictors) diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S index 5170ce1021da..e4f37b9dd47c 100644 --- a/arch/arm64/kvm/hyp/hyp-entry.S +++ b/arch/arm64/kvm/hyp/hyp-entry.S @@ -104,6 +104,7 @@ el1_trap: /* * x0: ESR_EC */ + ldr x1, [sp, #16 + 8] // vcpu stored by __guest_enter /* * We trap the first access to the FP/SIMD to save the host context @@ -116,19 +117,18 @@ alternative_if_not ARM64_HAS_NO_FPSIMD b.eq __fpsimd_guest_restore alternative_else_nop_endif - mrs x1, tpidr_el2 mov x0, #ARM_EXCEPTION_TRAP b __guest_exit el1_irq: stp x0, x1, [sp, #-16]! - mrs x1, tpidr_el2 + ldr x1, [sp, #16 + 8] mov x0, #ARM_EXCEPTION_IRQ b __guest_exit el1_error: stp x0, x1, [sp, #-16]! - mrs x1, tpidr_el2 + ldr x1, [sp, #16 + 8] mov x0, #ARM_EXCEPTION_EL1_SERROR b __guest_exit @@ -163,6 +163,18 @@ ENTRY(__hyp_do_panic) eret ENDPROC(__hyp_do_panic) +ENTRY(__hyp_panic) + /* + * '=kvm_host_cpu_state' is a host VA from the constant pool, it may + * not be accessible by this address from EL2, hyp_panic() converts + * it with kern_hyp_va() before use. + */ + ldr x0, =kvm_host_cpu_state + mrs x1, tpidr_el2 + add x0, x0, x1 + b hyp_panic +ENDPROC(__hyp_panic) + .macro invalid_vector label, target = __hyp_panic .align 2 \label: diff --git a/arch/arm64/kvm/hyp/s2-setup.c b/arch/arm64/kvm/hyp/s2-setup.c index a81f5e10fc8c..603e1ee83e89 100644 --- a/arch/arm64/kvm/hyp/s2-setup.c +++ b/arch/arm64/kvm/hyp/s2-setup.c @@ -32,6 +32,8 @@ u32 __hyp_text __init_stage2_translation(void) * PS is only 3. Fortunately, bit 19 is RES0 in VTCR_EL2... */ parange = read_sysreg(id_aa64mmfr0_el1) & 7; + if (parange > ID_AA64MMFR0_PARANGE_MAX) + parange = ID_AA64MMFR0_PARANGE_MAX; val |= parange << 16; /* Compute the actual PARange... */ diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c index f7c651f3a8c0..036e1f3d77a6 100644 --- a/arch/arm64/kvm/hyp/switch.c +++ b/arch/arm64/kvm/hyp/switch.c @@ -17,6 +17,7 @@ #include <linux/types.h> #include <linux/jump_label.h> +#include <uapi/linux/psci.h> #include <asm/kvm_asm.h> #include <asm/kvm_emulate.h> @@ -52,7 +53,7 @@ static void __hyp_text __activate_traps_vhe(void) val &= ~(CPACR_EL1_FPEN | CPACR_EL1_ZEN); write_sysreg(val, cpacr_el1); - write_sysreg(__kvm_hyp_vector, vbar_el1); + write_sysreg(kvm_get_hyp_vector(), vbar_el1); } static void __hyp_text __activate_traps_nvhe(void) @@ -93,6 +94,9 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu) write_sysreg(val, hcr_el2); + if (cpus_have_const_cap(ARM64_HAS_RAS_EXTN) && (val & HCR_VSE)) + write_sysreg_s(vcpu->arch.vsesr_el2, SYS_VSESR_EL2); + /* Trap on AArch32 cp15 c15 accesses (EL1 or EL0) */ write_sysreg(1 << 15, hstr_el2); /* @@ -235,11 +239,12 @@ static bool __hyp_text __translate_far_to_hpfar(u64 far, u64 *hpfar) static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu) { - u64 esr = read_sysreg_el2(esr); - u8 ec = ESR_ELx_EC(esr); + u8 ec; + u64 esr; u64 hpfar, far; - vcpu->arch.fault.esr_el2 = esr; + esr = vcpu->arch.fault.esr_el2; + ec = ESR_ELx_EC(esr); if (ec != ESR_ELx_EC_DABT_LOW && ec != ESR_ELx_EC_IABT_LOW) return true; @@ -305,9 +310,9 @@ int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu) u64 exit_code; vcpu = kern_hyp_va(vcpu); - write_sysreg(vcpu, tpidr_el2); host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context); + host_ctxt->__hyp_running_vcpu = vcpu; guest_ctxt = &vcpu->arch.ctxt; __sysreg_save_host_state(host_ctxt); @@ -332,6 +337,8 @@ again: exit_code = __guest_enter(vcpu, host_ctxt); /* And we're baaack! */ + if (ARM_EXCEPTION_CODE(exit_code) != ARM_EXCEPTION_IRQ) + vcpu->arch.fault.esr_el2 = read_sysreg_el2(esr); /* * We're using the raw exception code in order to only process * the trap if no SError is pending. We will come back to the @@ -341,6 +348,18 @@ again: if (exit_code == ARM_EXCEPTION_TRAP && !__populate_fault_info(vcpu)) goto again; + if (exit_code == ARM_EXCEPTION_TRAP && + (kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_HVC64 || + kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_HVC32) && + vcpu_get_reg(vcpu, 0) == PSCI_0_2_FN_PSCI_VERSION) { + u64 val = PSCI_RET_NOT_SUPPORTED; + if (test_bit(KVM_ARM_VCPU_PSCI_0_2, vcpu->arch.features)) + val = 2; + + vcpu_set_reg(vcpu, 0, val); + goto again; + } + if (static_branch_unlikely(&vgic_v2_cpuif_trap) && exit_code == ARM_EXCEPTION_TRAP) { bool valid; @@ -393,6 +412,14 @@ again: /* 0 falls through to be handled out of EL2 */ } + if (cpus_have_const_cap(ARM64_HARDEN_BP_POST_GUEST_EXIT)) { + u32 midr = read_cpuid_id(); + + /* Apply BTAC predictors mitigation to all Falkor chips */ + if ((midr & MIDR_CPU_MODEL_MASK) == MIDR_QCOM_FALKOR_V1) + __qcom_hyp_sanitize_btac_predictors(); + } + fp_enabled = __fpsimd_enabled(); __sysreg_save_guest_state(guest_ctxt); @@ -422,7 +449,8 @@ again: static const char __hyp_panic_string[] = "HYP panic:\nPS:%08llx PC:%016llx ESR:%08llx\nFAR:%016llx HPFAR:%016llx PAR:%016llx\nVCPU:%p\n"; -static void __hyp_text __hyp_call_panic_nvhe(u64 spsr, u64 elr, u64 par) +static void __hyp_text __hyp_call_panic_nvhe(u64 spsr, u64 elr, u64 par, + struct kvm_vcpu *vcpu) { unsigned long str_va; @@ -436,35 +464,35 @@ static void __hyp_text __hyp_call_panic_nvhe(u64 spsr, u64 elr, u64 par) __hyp_do_panic(str_va, spsr, elr, read_sysreg(esr_el2), read_sysreg_el2(far), - read_sysreg(hpfar_el2), par, - (void *)read_sysreg(tpidr_el2)); + read_sysreg(hpfar_el2), par, vcpu); } -static void __hyp_text __hyp_call_panic_vhe(u64 spsr, u64 elr, u64 par) +static void __hyp_text __hyp_call_panic_vhe(u64 spsr, u64 elr, u64 par, + struct kvm_vcpu *vcpu) { panic(__hyp_panic_string, spsr, elr, read_sysreg_el2(esr), read_sysreg_el2(far), - read_sysreg(hpfar_el2), par, - (void *)read_sysreg(tpidr_el2)); + read_sysreg(hpfar_el2), par, vcpu); } static hyp_alternate_select(__hyp_call_panic, __hyp_call_panic_nvhe, __hyp_call_panic_vhe, ARM64_HAS_VIRT_HOST_EXTN); -void __hyp_text __noreturn __hyp_panic(void) +void __hyp_text __noreturn hyp_panic(struct kvm_cpu_context *__host_ctxt) { + struct kvm_vcpu *vcpu = NULL; + u64 spsr = read_sysreg_el2(spsr); u64 elr = read_sysreg_el2(elr); u64 par = read_sysreg(par_el1); if (read_sysreg(vttbr_el2)) { - struct kvm_vcpu *vcpu; struct kvm_cpu_context *host_ctxt; - vcpu = (struct kvm_vcpu *)read_sysreg(tpidr_el2); - host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context); + host_ctxt = kern_hyp_va(__host_ctxt); + vcpu = host_ctxt->__hyp_running_vcpu; __timer_disable_traps(vcpu); __deactivate_traps(vcpu); __deactivate_vm(vcpu); @@ -472,7 +500,7 @@ void __hyp_text __noreturn __hyp_panic(void) } /* Call panic for real */ - __hyp_call_panic()(spsr, elr, par); + __hyp_call_panic()(spsr, elr, par, vcpu); unreachable(); } diff --git a/arch/arm64/kvm/hyp/sysreg-sr.c b/arch/arm64/kvm/hyp/sysreg-sr.c index 934137647837..2c17afd2be96 100644 --- a/arch/arm64/kvm/hyp/sysreg-sr.c +++ b/arch/arm64/kvm/hyp/sysreg-sr.c @@ -27,8 +27,8 @@ static void __hyp_text __sysreg_do_nothing(struct kvm_cpu_context *ctxt) { } /* * Non-VHE: Both host and guest must save everything. * - * VHE: Host must save tpidr*_el[01], actlr_el1, mdscr_el1, sp0, pc, - * pstate, and guest must save everything. + * VHE: Host must save tpidr*_el0, actlr_el1, mdscr_el1, sp_el0, + * and guest must save everything. */ static void __hyp_text __sysreg_save_common_state(struct kvm_cpu_context *ctxt) @@ -36,11 +36,8 @@ static void __hyp_text __sysreg_save_common_state(struct kvm_cpu_context *ctxt) ctxt->sys_regs[ACTLR_EL1] = read_sysreg(actlr_el1); ctxt->sys_regs[TPIDR_EL0] = read_sysreg(tpidr_el0); ctxt->sys_regs[TPIDRRO_EL0] = read_sysreg(tpidrro_el0); - ctxt->sys_regs[TPIDR_EL1] = read_sysreg(tpidr_el1); ctxt->sys_regs[MDSCR_EL1] = read_sysreg(mdscr_el1); ctxt->gp_regs.regs.sp = read_sysreg(sp_el0); - ctxt->gp_regs.regs.pc = read_sysreg_el2(elr); - ctxt->gp_regs.regs.pstate = read_sysreg_el2(spsr); } static void __hyp_text __sysreg_save_state(struct kvm_cpu_context *ctxt) @@ -62,10 +59,16 @@ static void __hyp_text __sysreg_save_state(struct kvm_cpu_context *ctxt) ctxt->sys_regs[AMAIR_EL1] = read_sysreg_el1(amair); ctxt->sys_regs[CNTKCTL_EL1] = read_sysreg_el1(cntkctl); ctxt->sys_regs[PAR_EL1] = read_sysreg(par_el1); + ctxt->sys_regs[TPIDR_EL1] = read_sysreg(tpidr_el1); ctxt->gp_regs.sp_el1 = read_sysreg(sp_el1); ctxt->gp_regs.elr_el1 = read_sysreg_el1(elr); ctxt->gp_regs.spsr[KVM_SPSR_EL1]= read_sysreg_el1(spsr); + ctxt->gp_regs.regs.pc = read_sysreg_el2(elr); + ctxt->gp_regs.regs.pstate = read_sysreg_el2(spsr); + + if (cpus_have_const_cap(ARM64_HAS_RAS_EXTN)) + ctxt->sys_regs[DISR_EL1] = read_sysreg_s(SYS_VDISR_EL2); } static hyp_alternate_select(__sysreg_call_save_host_state, @@ -89,11 +92,8 @@ static void __hyp_text __sysreg_restore_common_state(struct kvm_cpu_context *ctx write_sysreg(ctxt->sys_regs[ACTLR_EL1], actlr_el1); write_sysreg(ctxt->sys_regs[TPIDR_EL0], tpidr_el0); write_sysreg(ctxt->sys_regs[TPIDRRO_EL0], tpidrro_el0); - write_sysreg(ctxt->sys_regs[TPIDR_EL1], tpidr_el1); write_sysreg(ctxt->sys_regs[MDSCR_EL1], mdscr_el1); write_sysreg(ctxt->gp_regs.regs.sp, sp_el0); - write_sysreg_el2(ctxt->gp_regs.regs.pc, elr); - write_sysreg_el2(ctxt->gp_regs.regs.pstate, spsr); } static void __hyp_text __sysreg_restore_state(struct kvm_cpu_context *ctxt) @@ -115,10 +115,16 @@ static void __hyp_text __sysreg_restore_state(struct kvm_cpu_context *ctxt) write_sysreg_el1(ctxt->sys_regs[AMAIR_EL1], amair); write_sysreg_el1(ctxt->sys_regs[CNTKCTL_EL1], cntkctl); write_sysreg(ctxt->sys_regs[PAR_EL1], par_el1); + write_sysreg(ctxt->sys_regs[TPIDR_EL1], tpidr_el1); write_sysreg(ctxt->gp_regs.sp_el1, sp_el1); write_sysreg_el1(ctxt->gp_regs.elr_el1, elr); write_sysreg_el1(ctxt->gp_regs.spsr[KVM_SPSR_EL1],spsr); + write_sysreg_el2(ctxt->gp_regs.regs.pc, elr); + write_sysreg_el2(ctxt->gp_regs.regs.pstate, spsr); + + if (cpus_have_const_cap(ARM64_HAS_RAS_EXTN)) + write_sysreg_s(ctxt->sys_regs[DISR_EL1], SYS_VDISR_EL2); } static hyp_alternate_select(__sysreg_call_restore_host_state, diff --git a/arch/arm64/kvm/inject_fault.c b/arch/arm64/kvm/inject_fault.c index 8ecbcb40e317..60666a056944 100644 --- a/arch/arm64/kvm/inject_fault.c +++ b/arch/arm64/kvm/inject_fault.c @@ -164,14 +164,25 @@ void kvm_inject_undefined(struct kvm_vcpu *vcpu) inject_undef64(vcpu); } +static void pend_guest_serror(struct kvm_vcpu *vcpu, u64 esr) +{ + vcpu_set_vsesr(vcpu, esr); + vcpu_set_hcr(vcpu, vcpu_get_hcr(vcpu) | HCR_VSE); +} + /** * kvm_inject_vabt - inject an async abort / SError into the guest * @vcpu: The VCPU to receive the exception * * It is assumed that this code is called from the VCPU thread and that the * VCPU therefore is not currently executing guest code. + * + * Systems with the RAS Extensions specify an imp-def ESR (ISV/IDS = 1) with + * the remaining ISS all-zeros so that this error is not interpreted as an + * uncategorized RAS error. Without the RAS Extensions we can't specify an ESR + * value, so the CPU generates an imp-def value. */ void kvm_inject_vabt(struct kvm_vcpu *vcpu) { - vcpu_set_hcr(vcpu, vcpu_get_hcr(vcpu) | HCR_VSE); + pend_guest_serror(vcpu, ESR_ELx_ISV); } diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index 1830ebc227d1..50a43c7b97ca 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -1159,6 +1159,16 @@ static const struct sys_reg_desc sys_reg_descs[] = { { SYS_DESC(SYS_AFSR0_EL1), access_vm_reg, reset_unknown, AFSR0_EL1 }, { SYS_DESC(SYS_AFSR1_EL1), access_vm_reg, reset_unknown, AFSR1_EL1 }, { SYS_DESC(SYS_ESR_EL1), access_vm_reg, reset_unknown, ESR_EL1 }, + + { SYS_DESC(SYS_ERRIDR_EL1), trap_raz_wi }, + { SYS_DESC(SYS_ERRSELR_EL1), trap_raz_wi }, + { SYS_DESC(SYS_ERXFR_EL1), trap_raz_wi }, + { SYS_DESC(SYS_ERXCTLR_EL1), trap_raz_wi }, + { SYS_DESC(SYS_ERXSTATUS_EL1), trap_raz_wi }, + { SYS_DESC(SYS_ERXADDR_EL1), trap_raz_wi }, + { SYS_DESC(SYS_ERXMISC0_EL1), trap_raz_wi }, + { SYS_DESC(SYS_ERXMISC1_EL1), trap_raz_wi }, + { SYS_DESC(SYS_FAR_EL1), access_vm_reg, reset_unknown, FAR_EL1 }, { SYS_DESC(SYS_PAR_EL1), NULL, reset_unknown, PAR_EL1 }, @@ -1169,6 +1179,7 @@ static const struct sys_reg_desc sys_reg_descs[] = { { SYS_DESC(SYS_AMAIR_EL1), access_vm_reg, reset_amair_el1, AMAIR_EL1 }, { SYS_DESC(SYS_VBAR_EL1), NULL, reset_val, VBAR_EL1, 0 }, + { SYS_DESC(SYS_DISR_EL1), NULL, reset_val, DISR_EL1, 0 }, { SYS_DESC(SYS_ICC_IAR0_EL1), write_to_read_only }, { SYS_DESC(SYS_ICC_EOIR0_EL1), read_from_write_only }, diff --git a/arch/arm64/lib/clear_user.S b/arch/arm64/lib/clear_user.S index e88fb99c1561..3d69a8d41fa5 100644 --- a/arch/arm64/lib/clear_user.S +++ b/arch/arm64/lib/clear_user.S @@ -30,7 +30,7 @@ * Alignment fixed up by hardware. */ ENTRY(__clear_user) - uaccess_enable_not_uao x2, x3 + uaccess_enable_not_uao x2, x3, x4 mov x2, x1 // save the size for fixup return subs x1, x1, #8 b.mi 2f @@ -50,7 +50,7 @@ uao_user_alternative 9f, strh, sttrh, wzr, x0, 2 b.mi 5f uao_user_alternative 9f, strb, sttrb, wzr, x0, 0 5: mov x0, #0 - uaccess_disable_not_uao x2 + uaccess_disable_not_uao x2, x3 ret ENDPROC(__clear_user) diff --git a/arch/arm64/lib/copy_from_user.S b/arch/arm64/lib/copy_from_user.S index 4b5d826895ff..20305d485046 100644 --- a/arch/arm64/lib/copy_from_user.S +++ b/arch/arm64/lib/copy_from_user.S @@ -64,10 +64,10 @@ end .req x5 ENTRY(__arch_copy_from_user) - uaccess_enable_not_uao x3, x4 + uaccess_enable_not_uao x3, x4, x5 add end, x0, x2 #include "copy_template.S" - uaccess_disable_not_uao x3 + uaccess_disable_not_uao x3, x4 mov x0, #0 // Nothing to copy ret ENDPROC(__arch_copy_from_user) diff --git a/arch/arm64/lib/copy_in_user.S b/arch/arm64/lib/copy_in_user.S index b24a830419ad..fbb090f431a5 100644 --- a/arch/arm64/lib/copy_in_user.S +++ b/arch/arm64/lib/copy_in_user.S @@ -65,10 +65,10 @@ end .req x5 ENTRY(raw_copy_in_user) - uaccess_enable_not_uao x3, x4 + uaccess_enable_not_uao x3, x4, x5 add end, x0, x2 #include "copy_template.S" - uaccess_disable_not_uao x3 + uaccess_disable_not_uao x3, x4 mov x0, #0 ret ENDPROC(raw_copy_in_user) diff --git a/arch/arm64/lib/copy_to_user.S b/arch/arm64/lib/copy_to_user.S index 351f0766f7a6..fda6172d6b88 100644 --- a/arch/arm64/lib/copy_to_user.S +++ b/arch/arm64/lib/copy_to_user.S @@ -63,10 +63,10 @@ end .req x5 ENTRY(__arch_copy_to_user) - uaccess_enable_not_uao x3, x4 + uaccess_enable_not_uao x3, x4, x5 add end, x0, x2 #include "copy_template.S" - uaccess_disable_not_uao x3 + uaccess_disable_not_uao x3, x4 mov x0, #0 ret ENDPROC(__arch_copy_to_user) diff --git a/arch/arm64/lib/tishift.S b/arch/arm64/lib/tishift.S index 0179a43cc045..d3db9b2cd479 100644 --- a/arch/arm64/lib/tishift.S +++ b/arch/arm64/lib/tishift.S @@ -38,19 +38,19 @@ ENTRY(__ashlti3) ENDPROC(__ashlti3) ENTRY(__ashrti3) - cbz x2, 3f + cbz x2, 1f mov x3, #64 sub x3, x3, x2 cmp x3, #0 - b.le 4f + b.le 2f lsr x0, x0, x2 lsl x3, x1, x3 asr x2, x1, x2 orr x0, x0, x3 mov x1, x2 -3: +1: ret -4: +2: neg w0, w3 asr x2, x1, #63 asr x0, x1, x0 diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S index 7f1dbe962cf5..91464e7f77cc 100644 --- a/arch/arm64/mm/cache.S +++ b/arch/arm64/mm/cache.S @@ -49,7 +49,7 @@ ENTRY(flush_icache_range) * - end - virtual end address of region */ ENTRY(__flush_cache_user_range) - uaccess_ttbr0_enable x2, x3 + uaccess_ttbr0_enable x2, x3, x4 dcache_line_size x2, x3 sub x3, x2, #1 bic x4, x0, x3 @@ -72,7 +72,7 @@ USER(9f, ic ivau, x4 ) // invalidate I line PoU isb mov x0, #0 1: - uaccess_ttbr0_disable x1 + uaccess_ttbr0_disable x1, x2 ret 9: mov x0, #-EFAULT diff --git a/arch/arm64/mm/context.c b/arch/arm64/mm/context.c index 6f4017046323..301417ae2ba8 100644 --- a/arch/arm64/mm/context.c +++ b/arch/arm64/mm/context.c @@ -39,7 +39,16 @@ static cpumask_t tlb_flush_pending; #define ASID_MASK (~GENMASK(asid_bits - 1, 0)) #define ASID_FIRST_VERSION (1UL << asid_bits) -#define NUM_USER_ASIDS ASID_FIRST_VERSION + +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 +#define NUM_USER_ASIDS (ASID_FIRST_VERSION >> 1) +#define asid2idx(asid) (((asid) & ~ASID_MASK) >> 1) +#define idx2asid(idx) (((idx) << 1) & ~ASID_MASK) +#else +#define NUM_USER_ASIDS (ASID_FIRST_VERSION) +#define asid2idx(asid) ((asid) & ~ASID_MASK) +#define idx2asid(idx) asid2idx(idx) +#endif /* Get the ASIDBits supported by the current CPU */ static u32 get_cpu_asid_bits(void) @@ -79,13 +88,6 @@ void verify_cpu_asid_bits(void) } } -static void set_reserved_asid_bits(void) -{ - if (IS_ENABLED(CONFIG_QCOM_FALKOR_ERRATUM_1003) && - cpus_have_const_cap(ARM64_WORKAROUND_QCOM_FALKOR_E1003)) - __set_bit(FALKOR_RESERVED_ASID, asid_map); -} - static void flush_context(unsigned int cpu) { int i; @@ -94,8 +96,6 @@ static void flush_context(unsigned int cpu) /* Update the list of reserved ASIDs and the ASID bitmap. */ bitmap_clear(asid_map, 0, NUM_USER_ASIDS); - set_reserved_asid_bits(); - for_each_possible_cpu(i) { asid = atomic64_xchg_relaxed(&per_cpu(active_asids, i), 0); /* @@ -107,7 +107,7 @@ static void flush_context(unsigned int cpu) */ if (asid == 0) asid = per_cpu(reserved_asids, i); - __set_bit(asid & ~ASID_MASK, asid_map); + __set_bit(asid2idx(asid), asid_map); per_cpu(reserved_asids, i) = asid; } @@ -162,16 +162,16 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu) * We had a valid ASID in a previous life, so try to re-use * it if possible. */ - asid &= ~ASID_MASK; - if (!__test_and_set_bit(asid, asid_map)) + if (!__test_and_set_bit(asid2idx(asid), asid_map)) return newasid; } /* * Allocate a free ASID. If we can't find one, take a note of the - * currently active ASIDs and mark the TLBs as requiring flushes. - * We always count from ASID #1, as we use ASID #0 when setting a - * reserved TTBR0 for the init_mm. + * currently active ASIDs and mark the TLBs as requiring flushes. We + * always count from ASID #2 (index 1), as we use ASID #0 when setting + * a reserved TTBR0 for the init_mm and we allocate ASIDs in even/odd + * pairs. */ asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, cur_idx); if (asid != NUM_USER_ASIDS) @@ -188,32 +188,35 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu) set_asid: __set_bit(asid, asid_map); cur_idx = asid; - return asid | generation; + return idx2asid(asid) | generation; } void check_and_switch_context(struct mm_struct *mm, unsigned int cpu) { unsigned long flags; - u64 asid; + u64 asid, old_active_asid; asid = atomic64_read(&mm->context.id); /* * The memory ordering here is subtle. - * If our ASID matches the current generation, then we update - * our active_asids entry with a relaxed xchg. Racing with a - * concurrent rollover means that either: + * If our active_asids is non-zero and the ASID matches the current + * generation, then we update the active_asids entry with a relaxed + * cmpxchg. Racing with a concurrent rollover means that either: * - * - We get a zero back from the xchg and end up waiting on the + * - We get a zero back from the cmpxchg and end up waiting on the * lock. Taking the lock synchronises with the rollover and so * we are forced to see the updated generation. * - * - We get a valid ASID back from the xchg, which means the + * - We get a valid ASID back from the cmpxchg, which means the * relaxed xchg in flush_context will treat us as reserved * because atomic RmWs are totally ordered for a given location. */ - if (!((asid ^ atomic64_read(&asid_generation)) >> asid_bits) - && atomic64_xchg_relaxed(&per_cpu(active_asids, cpu), asid)) + old_active_asid = atomic64_read(&per_cpu(active_asids, cpu)); + if (old_active_asid && + !((asid ^ atomic64_read(&asid_generation)) >> asid_bits) && + atomic64_cmpxchg_relaxed(&per_cpu(active_asids, cpu), + old_active_asid, asid)) goto switch_mm_fastpath; raw_spin_lock_irqsave(&cpu_asid_lock, flags); @@ -231,6 +234,9 @@ void check_and_switch_context(struct mm_struct *mm, unsigned int cpu) raw_spin_unlock_irqrestore(&cpu_asid_lock, flags); switch_mm_fastpath: + + arm64_apply_bp_hardening(); + /* * Defer TTBR0_EL1 setting for user threads to uaccess_enable() when * emulating PAN. @@ -239,6 +245,15 @@ switch_mm_fastpath: cpu_switch_mm(mm->pgd, mm); } +/* Errata workaround post TTBRx_EL1 update. */ +asmlinkage void post_ttbr_update_workaround(void) +{ + asm(ALTERNATIVE("nop; nop; nop", + "ic iallu; dsb nsh; isb", + ARM64_WORKAROUND_CAVIUM_27456, + CONFIG_CAVIUM_ERRATUM_27456)); +} + static int asids_init(void) { asid_bits = get_cpu_asid_bits(); @@ -254,8 +269,6 @@ static int asids_init(void) panic("Failed to allocate bitmap for %lu ASIDs\n", NUM_USER_ASIDS); - set_reserved_asid_bits(); - pr_info("ASID allocator initialised with %lu entries\n", NUM_USER_ASIDS); return 0; } diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index b45c5bcaeccb..a96ec0181818 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -24,7 +24,7 @@ #include <linux/export.h> #include <linux/slab.h> #include <linux/genalloc.h> -#include <linux/dma-mapping.h> +#include <linux/dma-direct.h> #include <linux/dma-contiguous.h> #include <linux/vmalloc.h> #include <linux/swiotlb.h> @@ -91,46 +91,6 @@ static int __free_from_pool(void *start, size_t size) return 1; } -static void *__dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flags, - unsigned long attrs) -{ - if (IS_ENABLED(CONFIG_ZONE_DMA) && - dev->coherent_dma_mask <= DMA_BIT_MASK(32)) - flags |= GFP_DMA; - if (dev_get_cma_area(dev) && gfpflags_allow_blocking(flags)) { - struct page *page; - void *addr; - - page = dma_alloc_from_contiguous(dev, size >> PAGE_SHIFT, - get_order(size), flags); - if (!page) - return NULL; - - *dma_handle = phys_to_dma(dev, page_to_phys(page)); - addr = page_address(page); - memset(addr, 0, size); - return addr; - } else { - return swiotlb_alloc_coherent(dev, size, dma_handle, flags); - } -} - -static void __dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle, - unsigned long attrs) -{ - bool freed; - phys_addr_t paddr = dma_to_phys(dev, dma_handle); - - - freed = dma_release_from_contiguous(dev, - phys_to_page(paddr), - size >> PAGE_SHIFT); - if (!freed) - swiotlb_free_coherent(dev, size, vaddr, dma_handle); -} - static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags, unsigned long attrs) @@ -152,7 +112,7 @@ static void *__dma_alloc(struct device *dev, size_t size, return addr; } - ptr = __dma_alloc_coherent(dev, size, dma_handle, flags, attrs); + ptr = swiotlb_alloc(dev, size, dma_handle, flags, attrs); if (!ptr) goto no_mem; @@ -173,7 +133,7 @@ static void *__dma_alloc(struct device *dev, size_t size, return coherent_ptr; no_map: - __dma_free_coherent(dev, size, ptr, *dma_handle, attrs); + swiotlb_free(dev, size, ptr, *dma_handle, attrs); no_mem: return NULL; } @@ -191,7 +151,7 @@ static void __dma_free(struct device *dev, size_t size, return; vunmap(vaddr); } - __dma_free_coherent(dev, size, swiotlb_addr, dma_handle, attrs); + swiotlb_free(dev, size, swiotlb_addr, dma_handle, attrs); } static dma_addr_t __swiotlb_map_page(struct device *dev, struct page *page, @@ -368,7 +328,7 @@ static int __swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t addr) return 0; } -static const struct dma_map_ops swiotlb_dma_ops = { +static const struct dma_map_ops arm64_swiotlb_dma_ops = { .alloc = __dma_alloc, .free = __dma_free, .mmap = __swiotlb_mmap, @@ -397,7 +357,7 @@ static int __init atomic_pool_init(void) page = dma_alloc_from_contiguous(NULL, nr_pages, pool_size_order, GFP_KERNEL); else - page = alloc_pages(GFP_DMA, pool_size_order); + page = alloc_pages(GFP_DMA32, pool_size_order); if (page) { int ret; @@ -923,7 +883,7 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, const struct iommu_ops *iommu, bool coherent) { if (!dev->dma_ops) - dev->dma_ops = &swiotlb_dma_ops; + dev->dma_ops = &arm64_swiotlb_dma_ops; dev->archdata.dma_coherent = coherent; __iommu_setup_dma_ops(dev, dma_base, size, iommu); diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 9b7f89df49db..ce441d29e7f6 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -596,7 +596,7 @@ static int do_sea(unsigned long addr, unsigned int esr, struct pt_regs *regs) info.si_signo = SIGBUS; info.si_errno = 0; - info.si_code = 0; + info.si_code = BUS_FIXME; if (esr & ESR_ELx_FnV) info.si_addr = NULL; else @@ -607,70 +607,70 @@ static int do_sea(unsigned long addr, unsigned int esr, struct pt_regs *regs) } static const struct fault_info fault_info[] = { - { do_bad, SIGBUS, 0, "ttbr address size fault" }, - { do_bad, SIGBUS, 0, "level 1 address size fault" }, - { do_bad, SIGBUS, 0, "level 2 address size fault" }, - { do_bad, SIGBUS, 0, "level 3 address size fault" }, + { do_bad, SIGBUS, BUS_FIXME, "ttbr address size fault" }, + { do_bad, SIGBUS, BUS_FIXME, "level 1 address size fault" }, + { do_bad, SIGBUS, BUS_FIXME, "level 2 address size fault" }, + { do_bad, SIGBUS, BUS_FIXME, "level 3 address size fault" }, { do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 0 translation fault" }, { do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 1 translation fault" }, { do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 2 translation fault" }, { do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 3 translation fault" }, - { do_bad, SIGBUS, 0, "unknown 8" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 8" }, { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 1 access flag fault" }, { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 2 access flag fault" }, { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 3 access flag fault" }, - { do_bad, SIGBUS, 0, "unknown 12" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 12" }, { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 1 permission fault" }, { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 2 permission fault" }, { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 3 permission fault" }, - { do_sea, SIGBUS, 0, "synchronous external abort" }, - { do_bad, SIGBUS, 0, "unknown 17" }, - { do_bad, SIGBUS, 0, "unknown 18" }, - { do_bad, SIGBUS, 0, "unknown 19" }, - { do_sea, SIGBUS, 0, "level 0 (translation table walk)" }, - { do_sea, SIGBUS, 0, "level 1 (translation table walk)" }, - { do_sea, SIGBUS, 0, "level 2 (translation table walk)" }, - { do_sea, SIGBUS, 0, "level 3 (translation table walk)" }, - { do_sea, SIGBUS, 0, "synchronous parity or ECC error" }, // Reserved when RAS is implemented - { do_bad, SIGBUS, 0, "unknown 25" }, - { do_bad, SIGBUS, 0, "unknown 26" }, - { do_bad, SIGBUS, 0, "unknown 27" }, - { do_sea, SIGBUS, 0, "level 0 synchronous parity error (translation table walk)" }, // Reserved when RAS is implemented - { do_sea, SIGBUS, 0, "level 1 synchronous parity error (translation table walk)" }, // Reserved when RAS is implemented - { do_sea, SIGBUS, 0, "level 2 synchronous parity error (translation table walk)" }, // Reserved when RAS is implemented - { do_sea, SIGBUS, 0, "level 3 synchronous parity error (translation table walk)" }, // Reserved when RAS is implemented - { do_bad, SIGBUS, 0, "unknown 32" }, + { do_sea, SIGBUS, BUS_FIXME, "synchronous external abort" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 17" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 18" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 19" }, + { do_sea, SIGBUS, BUS_FIXME, "level 0 (translation table walk)" }, + { do_sea, SIGBUS, BUS_FIXME, "level 1 (translation table walk)" }, + { do_sea, SIGBUS, BUS_FIXME, "level 2 (translation table walk)" }, + { do_sea, SIGBUS, BUS_FIXME, "level 3 (translation table walk)" }, + { do_sea, SIGBUS, BUS_FIXME, "synchronous parity or ECC error" }, // Reserved when RAS is implemented + { do_bad, SIGBUS, BUS_FIXME, "unknown 25" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 26" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 27" }, + { do_sea, SIGBUS, BUS_FIXME, "level 0 synchronous parity error (translation table walk)" }, // Reserved when RAS is implemented + { do_sea, SIGBUS, BUS_FIXME, "level 1 synchronous parity error (translation table walk)" }, // Reserved when RAS is implemented + { do_sea, SIGBUS, BUS_FIXME, "level 2 synchronous parity error (translation table walk)" }, // Reserved when RAS is implemented + { do_sea, SIGBUS, BUS_FIXME, "level 3 synchronous parity error (translation table walk)" }, // Reserved when RAS is implemented + { do_bad, SIGBUS, BUS_FIXME, "unknown 32" }, { do_alignment_fault, SIGBUS, BUS_ADRALN, "alignment fault" }, - { do_bad, SIGBUS, 0, "unknown 34" }, - { do_bad, SIGBUS, 0, "unknown 35" }, - { do_bad, SIGBUS, 0, "unknown 36" }, - { do_bad, SIGBUS, 0, "unknown 37" }, - { do_bad, SIGBUS, 0, "unknown 38" }, - { do_bad, SIGBUS, 0, "unknown 39" }, - { do_bad, SIGBUS, 0, "unknown 40" }, - { do_bad, SIGBUS, 0, "unknown 41" }, - { do_bad, SIGBUS, 0, "unknown 42" }, - { do_bad, SIGBUS, 0, "unknown 43" }, - { do_bad, SIGBUS, 0, "unknown 44" }, - { do_bad, SIGBUS, 0, "unknown 45" }, - { do_bad, SIGBUS, 0, "unknown 46" }, - { do_bad, SIGBUS, 0, "unknown 47" }, - { do_bad, SIGBUS, 0, "TLB conflict abort" }, - { do_bad, SIGBUS, 0, "Unsupported atomic hardware update fault" }, - { do_bad, SIGBUS, 0, "unknown 50" }, - { do_bad, SIGBUS, 0, "unknown 51" }, - { do_bad, SIGBUS, 0, "implementation fault (lockdown abort)" }, - { do_bad, SIGBUS, 0, "implementation fault (unsupported exclusive)" }, - { do_bad, SIGBUS, 0, "unknown 54" }, - { do_bad, SIGBUS, 0, "unknown 55" }, - { do_bad, SIGBUS, 0, "unknown 56" }, - { do_bad, SIGBUS, 0, "unknown 57" }, - { do_bad, SIGBUS, 0, "unknown 58" }, - { do_bad, SIGBUS, 0, "unknown 59" }, - { do_bad, SIGBUS, 0, "unknown 60" }, - { do_bad, SIGBUS, 0, "section domain fault" }, - { do_bad, SIGBUS, 0, "page domain fault" }, - { do_bad, SIGBUS, 0, "unknown 63" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 34" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 35" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 36" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 37" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 38" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 39" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 40" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 41" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 42" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 43" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 44" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 45" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 46" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 47" }, + { do_bad, SIGBUS, BUS_FIXME, "TLB conflict abort" }, + { do_bad, SIGBUS, BUS_FIXME, "Unsupported atomic hardware update fault" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 50" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 51" }, + { do_bad, SIGBUS, BUS_FIXME, "implementation fault (lockdown abort)" }, + { do_bad, SIGBUS, BUS_FIXME, "implementation fault (unsupported exclusive)" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 54" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 55" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 56" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 57" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 58" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 59" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 60" }, + { do_bad, SIGBUS, BUS_FIXME, "section domain fault" }, + { do_bad, SIGBUS, BUS_FIXME, "page domain fault" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 63" }, }; int handle_guest_sea(phys_addr_t addr, unsigned int esr) @@ -707,6 +707,23 @@ asmlinkage void __exception do_mem_abort(unsigned long addr, unsigned int esr, arm64_notify_die("", regs, &info, esr); } +asmlinkage void __exception do_el0_ia_bp_hardening(unsigned long addr, + unsigned int esr, + struct pt_regs *regs) +{ + /* + * We've taken an instruction abort from userspace and not yet + * re-enabled IRQs. If the address is a kernel address, apply + * BP hardening prior to enabling IRQs and pre-emption. + */ + if (addr > TASK_SIZE) + arm64_apply_bp_hardening(); + + local_irq_enable(); + do_mem_abort(addr, esr, regs); +} + + asmlinkage void __exception do_sp_pc_abort(unsigned long addr, unsigned int esr, struct pt_regs *regs) @@ -739,11 +756,11 @@ static struct fault_info __refdata debug_fault_info[] = { { do_bad, SIGTRAP, TRAP_HWBKPT, "hardware breakpoint" }, { do_bad, SIGTRAP, TRAP_HWBKPT, "hardware single-step" }, { do_bad, SIGTRAP, TRAP_HWBKPT, "hardware watchpoint" }, - { do_bad, SIGBUS, 0, "unknown 3" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 3" }, { do_bad, SIGTRAP, TRAP_BRKPT, "aarch32 BKPT" }, - { do_bad, SIGTRAP, 0, "aarch32 vector catch" }, + { do_bad, SIGTRAP, TRAP_FIXME, "aarch32 vector catch" }, { early_brk64, SIGTRAP, TRAP_BRKPT, "aarch64 BRK" }, - { do_bad, SIGBUS, 0, "unknown 7" }, + { do_bad, SIGBUS, BUS_FIXME, "unknown 7" }, }; void __init hook_debug_fault_code(int nr, diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 00e7b900ca41..9f3c47acf8ff 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -217,7 +217,7 @@ static void __init reserve_elfcorehdr(void) } #endif /* CONFIG_CRASH_DUMP */ /* - * Return the maximum physical address for ZONE_DMA (DMA_BIT_MASK(32)). It + * Return the maximum physical address for ZONE_DMA32 (DMA_BIT_MASK(32)). It * currently assumes that for memory starting above 4G, 32-bit devices will * use a DMA offset. */ @@ -233,8 +233,8 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max) { unsigned long max_zone_pfns[MAX_NR_ZONES] = {0}; - if (IS_ENABLED(CONFIG_ZONE_DMA)) - max_zone_pfns[ZONE_DMA] = PFN_DOWN(max_zone_dma_phys()); + if (IS_ENABLED(CONFIG_ZONE_DMA32)) + max_zone_pfns[ZONE_DMA32] = PFN_DOWN(max_zone_dma_phys()); max_zone_pfns[ZONE_NORMAL] = max; free_area_init_nodes(max_zone_pfns); @@ -251,9 +251,9 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max) memset(zone_size, 0, sizeof(zone_size)); /* 4GB maximum for 32-bit only capable devices */ -#ifdef CONFIG_ZONE_DMA +#ifdef CONFIG_ZONE_DMA32 max_dma = PFN_DOWN(arm64_dma_phys_limit); - zone_size[ZONE_DMA] = max_dma - min; + zone_size[ZONE_DMA32] = max_dma - min; #endif zone_size[ZONE_NORMAL] = max - max_dma; @@ -266,10 +266,10 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max) if (start >= max) continue; -#ifdef CONFIG_ZONE_DMA +#ifdef CONFIG_ZONE_DMA32 if (start < max_dma) { unsigned long dma_end = min(end, max_dma); - zhole_size[ZONE_DMA] -= dma_end - start; + zhole_size[ZONE_DMA32] -= dma_end - start; } #endif if (end > max_dma) { @@ -366,6 +366,9 @@ void __init arm64_memblock_init(void) /* Handle linux,usable-memory-range property */ fdt_enforce_memory_region(); + /* Remove memory above our supported physical address size */ + memblock_remove(1ULL << PHYS_MASK_SHIFT, ULLONG_MAX); + /* * Ensure that the linear region takes up exactly half of the kernel * virtual address space. This way, we can distinguish a linear address @@ -467,7 +470,7 @@ void __init arm64_memblock_init(void) early_init_fdt_scan_reserved_mem(); /* 4GB maximum for 32-bit only capable devices */ - if (IS_ENABLED(CONFIG_ZONE_DMA)) + if (IS_ENABLED(CONFIG_ZONE_DMA32)) arm64_dma_phys_limit = max_zone_dma_phys(); else arm64_dma_phys_limit = PHYS_MASK + 1; @@ -600,49 +603,6 @@ void __init mem_init(void) mem_init_print_info(NULL); -#define MLK(b, t) b, t, ((t) - (b)) >> 10 -#define MLM(b, t) b, t, ((t) - (b)) >> 20 -#define MLG(b, t) b, t, ((t) - (b)) >> 30 -#define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), SZ_1K) - - pr_notice("Virtual kernel memory layout:\n"); -#ifdef CONFIG_KASAN - pr_notice(" kasan : 0x%16lx - 0x%16lx (%6ld GB)\n", - MLG(KASAN_SHADOW_START, KASAN_SHADOW_END)); -#endif - pr_notice(" modules : 0x%16lx - 0x%16lx (%6ld MB)\n", - MLM(MODULES_VADDR, MODULES_END)); - pr_notice(" vmalloc : 0x%16lx - 0x%16lx (%6ld GB)\n", - MLG(VMALLOC_START, VMALLOC_END)); - pr_notice(" .text : 0x%p" " - 0x%p" " (%6ld KB)\n", - MLK_ROUNDUP(_text, _etext)); - pr_notice(" .rodata : 0x%p" " - 0x%p" " (%6ld KB)\n", - MLK_ROUNDUP(__start_rodata, __init_begin)); - pr_notice(" .init : 0x%p" " - 0x%p" " (%6ld KB)\n", - MLK_ROUNDUP(__init_begin, __init_end)); - pr_notice(" .data : 0x%p" " - 0x%p" " (%6ld KB)\n", - MLK_ROUNDUP(_sdata, _edata)); - pr_notice(" .bss : 0x%p" " - 0x%p" " (%6ld KB)\n", - MLK_ROUNDUP(__bss_start, __bss_stop)); - pr_notice(" fixed : 0x%16lx - 0x%16lx (%6ld KB)\n", - MLK(FIXADDR_START, FIXADDR_TOP)); - pr_notice(" PCI I/O : 0x%16lx - 0x%16lx (%6ld MB)\n", - MLM(PCI_IO_START, PCI_IO_END)); -#ifdef CONFIG_SPARSEMEM_VMEMMAP - pr_notice(" vmemmap : 0x%16lx - 0x%16lx (%6ld GB maximum)\n", - MLG(VMEMMAP_START, VMEMMAP_START + VMEMMAP_SIZE)); - pr_notice(" 0x%16lx - 0x%16lx (%6ld MB actual)\n", - MLM((unsigned long)phys_to_page(memblock_start_of_DRAM()), - (unsigned long)virt_to_page(high_memory))); -#endif - pr_notice(" memory : 0x%16lx - 0x%16lx (%6ld MB)\n", - MLM(__phys_to_virt(memblock_start_of_DRAM()), - (unsigned long)high_memory)); - -#undef MLK -#undef MLM -#undef MLK_ROUNDUP - /* * Check boundaries twice: Some fundamental inconsistencies can be * detected at build time already. diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c index acba49fb5aac..6e02e6fb4c7b 100644 --- a/arch/arm64/mm/kasan_init.c +++ b/arch/arm64/mm/kasan_init.c @@ -135,7 +135,8 @@ static void __init kasan_pgd_populate(unsigned long addr, unsigned long end, /* The early shadow maps everything to a single page of zeroes */ asmlinkage void __init kasan_early_init(void) { - BUILD_BUG_ON(KASAN_SHADOW_OFFSET != KASAN_SHADOW_END - (1UL << 61)); + BUILD_BUG_ON(KASAN_SHADOW_OFFSET != + KASAN_SHADOW_END - (1UL << (64 - KASAN_SHADOW_SCALE_SHIFT))); BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_START, PGDIR_SIZE)); BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_END, PGDIR_SIZE)); kasan_pgd_populate(KASAN_SHADOW_START, KASAN_SHADOW_END, NUMA_NO_NODE, diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index 267d2b79d52d..4e369dfb83b1 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -50,6 +50,7 @@ #define NO_CONT_MAPPINGS BIT(1) u64 idmap_t0sz = TCR_T0SZ(VA_BITS); +u64 idmap_ptrs_per_pgd = PTRS_PER_PGD; u64 kimage_voffset __ro_after_init; EXPORT_SYMBOL(kimage_voffset); @@ -525,6 +526,35 @@ static int __init parse_rodata(char *arg) } early_param("rodata", parse_rodata); +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 +static int __init map_entry_trampoline(void) +{ + pgprot_t prot = rodata_enabled ? PAGE_KERNEL_ROX : PAGE_KERNEL_EXEC; + phys_addr_t pa_start = __pa_symbol(__entry_tramp_text_start); + + /* The trampoline is always mapped and can therefore be global */ + pgprot_val(prot) &= ~PTE_NG; + + /* Map only the text into the trampoline page table */ + memset(tramp_pg_dir, 0, PGD_SIZE); + __create_pgd_mapping(tramp_pg_dir, pa_start, TRAMP_VALIAS, PAGE_SIZE, + prot, pgd_pgtable_alloc, 0); + + /* Map both the text and data into the kernel page table */ + __set_fixmap(FIX_ENTRY_TRAMP_TEXT, pa_start, prot); + if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) { + extern char __entry_tramp_data_start[]; + + __set_fixmap(FIX_ENTRY_TRAMP_DATA, + __pa_symbol(__entry_tramp_data_start), + PAGE_KERNEL_RO); + } + + return 0; +} +core_initcall(map_entry_trampoline); +#endif + /* * Create fine-grained mappings for the kernel. */ @@ -570,8 +600,8 @@ static void __init map_kernel(pgd_t *pgd) * entry instead. */ BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES)); - set_pud(pud_set_fixmap_offset(pgd, FIXADDR_START), - __pud(__pa_symbol(bm_pmd) | PUD_TYPE_TABLE)); + pud_populate(&init_mm, pud_set_fixmap_offset(pgd, FIXADDR_START), + lm_alias(bm_pmd)); pud_clear_fixmap(); } else { BUG(); @@ -612,7 +642,8 @@ void __init paging_init(void) * allocated with it. */ memblock_free(__pa_symbol(swapper_pg_dir) + PAGE_SIZE, - SWAPPER_DIR_SIZE - PAGE_SIZE); + __pa_symbol(swapper_pg_end) - __pa_symbol(swapper_pg_dir) + - PAGE_SIZE); } /* @@ -654,12 +685,14 @@ int kern_addr_valid(unsigned long addr) } #ifdef CONFIG_SPARSEMEM_VMEMMAP #if !ARM64_SWAPPER_USES_SECTION_MAPS -int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node) +int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node, + struct vmem_altmap *altmap) { return vmemmap_populate_basepages(start, end, node); } #else /* !ARM64_SWAPPER_USES_SECTION_MAPS */ -int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node) +int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node, + struct vmem_altmap *altmap) { unsigned long addr = start; unsigned long next; @@ -686,7 +719,7 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node) if (!p) return -ENOMEM; - set_pmd(pmd, __pmd(__pa(p) | PROT_SECT_NORMAL)); + pmd_set_huge(pmd, __pa(p), __pgprot(PROT_SECT_NORMAL)); } else vmemmap_verify((pte_t *)pmd, node, addr, next); } while (addr = next, addr != end); @@ -694,7 +727,8 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node) return 0; } #endif /* CONFIG_ARM64_64K_PAGES */ -void vmemmap_free(unsigned long start, unsigned long end) +void vmemmap_free(unsigned long start, unsigned long end, + struct vmem_altmap *altmap) { } #endif /* CONFIG_SPARSEMEM_VMEMMAP */ @@ -879,15 +913,19 @@ int __init arch_ioremap_pmd_supported(void) int pud_set_huge(pud_t *pud, phys_addr_t phys, pgprot_t prot) { + pgprot_t sect_prot = __pgprot(PUD_TYPE_SECT | + pgprot_val(mk_sect_prot(prot))); BUG_ON(phys & ~PUD_MASK); - set_pud(pud, __pud(phys | PUD_TYPE_SECT | pgprot_val(mk_sect_prot(prot)))); + set_pud(pud, pfn_pud(__phys_to_pfn(phys), sect_prot)); return 1; } int pmd_set_huge(pmd_t *pmd, phys_addr_t phys, pgprot_t prot) { + pgprot_t sect_prot = __pgprot(PMD_TYPE_SECT | + pgprot_val(mk_sect_prot(prot))); BUG_ON(phys & ~PMD_MASK); - set_pmd(pmd, __pmd(phys | PMD_TYPE_SECT | pgprot_val(mk_sect_prot(prot)))); + set_pmd(pmd, pfn_pmd(__phys_to_pfn(phys), sect_prot)); return 1; } diff --git a/arch/arm64/mm/pgd.c b/arch/arm64/mm/pgd.c index 051e71ec3335..289f9113a27a 100644 --- a/arch/arm64/mm/pgd.c +++ b/arch/arm64/mm/pgd.c @@ -49,6 +49,14 @@ void __init pgd_cache_init(void) if (PGD_SIZE == PAGE_SIZE) return; +#ifdef CONFIG_ARM64_PA_BITS_52 + /* + * With 52-bit physical addresses, the architecture requires the + * top-level table to be aligned to at least 64 bytes. + */ + BUILD_BUG_ON(PGD_SIZE < 64); +#endif + /* * Naturally aligned pgds required by the architecture. */ diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index 95233dfc4c39..9f177aac6390 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -70,7 +70,11 @@ ENTRY(cpu_do_suspend) mrs x8, mdscr_el1 mrs x9, oslsr_el1 mrs x10, sctlr_el1 +alternative_if_not ARM64_HAS_VIRT_HOST_EXTN mrs x11, tpidr_el1 +alternative_else + mrs x11, tpidr_el2 +alternative_endif mrs x12, sp_el0 stp x2, x3, [x0] stp x4, xzr, [x0, #16] @@ -116,7 +120,11 @@ ENTRY(cpu_do_resume) msr mdscr_el1, x10 msr sctlr_el1, x12 +alternative_if_not ARM64_HAS_VIRT_HOST_EXTN msr tpidr_el1, x13 +alternative_else + msr tpidr_el2, x13 +alternative_endif msr sp_el0, x14 /* * Restore oslsr_el1 by writing oslar_el1 @@ -124,6 +132,11 @@ ENTRY(cpu_do_resume) ubfx x11, x11, #1, #1 msr oslar_el1, x11 reset_pmuserenr_el0 x0 // Disable PMU access from EL0 + +alternative_if ARM64_HAS_RAS_EXTN + msr_s SYS_DISR_EL1, xzr +alternative_else_nop_endif + isb ret ENDPROC(cpu_do_resume) @@ -138,13 +151,18 @@ ENDPROC(cpu_do_resume) * - pgd_phys - physical address of new TTB */ ENTRY(cpu_do_switch_mm) - pre_ttbr0_update_workaround x0, x2, x3 + mrs x2, ttbr1_el1 mmid x1, x1 // get mm->context.id - bfi x0, x1, #48, #16 // set the ASID - msr ttbr0_el1, x0 // set TTBR0 + phys_to_ttbr x0, x3 +#ifdef CONFIG_ARM64_SW_TTBR0_PAN + bfi x3, x1, #48, #16 // set the ASID field in TTBR0 +#endif + bfi x2, x1, #48, #16 // set the ASID + msr ttbr1_el1, x2 // in TTBR1 (since TCR.A1 is set) isb - post_ttbr0_update_workaround - ret + msr ttbr0_el1, x3 // now update TTBR0 + isb + b post_ttbr_update_workaround // Back to C code... ENDPROC(cpu_do_switch_mm) .pushsection ".idmap.text", "ax" @@ -158,14 +176,16 @@ ENTRY(idmap_cpu_replace_ttbr1) save_and_disable_daif flags=x2 adrp x1, empty_zero_page - msr ttbr1_el1, x1 + phys_to_ttbr x1, x3 + msr ttbr1_el1, x3 isb tlbi vmalle1 dsb nsh isb - msr ttbr1_el1, x0 + phys_to_ttbr x0, x3 + msr ttbr1_el1, x3 isb restore_daif x2 @@ -214,25 +234,19 @@ ENTRY(__cpu_setup) /* * Prepare SCTLR */ - adr x5, crval - ldp w5, w6, [x5] - mrs x0, sctlr_el1 - bic x0, x0, x5 // clear bits - orr x0, x0, x6 // set bits + mov_q x0, SCTLR_EL1_SET /* * Set/prepare TCR and TTBR. We use 512GB (39-bit) address range for * both user and kernel. */ ldr x10, =TCR_TxSZ(VA_BITS) | TCR_CACHE_FLAGS | TCR_SMP_FLAGS | \ - TCR_TG_FLAGS | TCR_ASID16 | TCR_TBI0 + TCR_TG_FLAGS | TCR_ASID16 | TCR_TBI0 | TCR_A1 tcr_set_idmap_t0sz x10, x9 /* - * Read the PARange bits from ID_AA64MMFR0_EL1 and set the IPS bits in - * TCR_EL1. + * Set the IPS bits in TCR_EL1. */ - mrs x9, ID_AA64MMFR0_EL1 - bfi x10, x9, #32, #3 + tcr_compute_pa_size x10, #TCR_IPS_SHIFT, x5, x6 #ifdef CONFIG_ARM64_HW_AFDBM /* * Hardware update of the Access and Dirty bits. @@ -249,21 +263,3 @@ ENTRY(__cpu_setup) msr tcr_el1, x10 ret // return to head.S ENDPROC(__cpu_setup) - - /* - * We set the desired value explicitly, including those of the - * reserved bits. The values of bits EE & E0E were set early in - * el2_setup, which are left untouched below. - * - * n n T - * U E WT T UD US IHBS - * CE0 XWHW CZ ME TEEA S - * .... .IEE .... NEAI TE.I ..AD DEN0 ACAM - * 0011 0... 1101 ..0. ..0. 10.. .0.. .... < hardware reserved - * .... .1.. .... 01.1 11.1 ..01 0.01 1101 < software settings - */ - .type crval, #object -crval: - .word 0xfcffffff // clear - .word 0x34d5d91d // set - .popsection diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c index bb32f7f6dd0f..1d4f1da7c58f 100644 --- a/arch/arm64/net/bpf_jit_comp.c +++ b/arch/arm64/net/bpf_jit_comp.c @@ -31,8 +31,6 @@ #include "bpf_jit.h" -int bpf_jit_enable __read_mostly; - #define TMP_REG_1 (MAX_BPF_JIT_REG + 0) #define TMP_REG_2 (MAX_BPF_JIT_REG + 1) #define TCALL_CNT (MAX_BPF_JIT_REG + 2) @@ -99,6 +97,20 @@ static inline void emit_a64_mov_i64(const int reg, const u64 val, } } +static inline void emit_addr_mov_i64(const int reg, const u64 val, + struct jit_ctx *ctx) +{ + u64 tmp = val; + int shift = 0; + + emit(A64_MOVZ(1, reg, tmp & 0xffff, shift), ctx); + for (;shift < 48;) { + tmp >>= 16; + shift += 16; + emit(A64_MOVK(1, reg, tmp & 0xffff, shift), ctx); + } +} + static inline void emit_a64_mov_i(const int is64, const int reg, const s32 val, struct jit_ctx *ctx) { @@ -378,18 +390,6 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx) case BPF_ALU64 | BPF_DIV | BPF_X: case BPF_ALU | BPF_MOD | BPF_X: case BPF_ALU64 | BPF_MOD | BPF_X: - { - const u8 r0 = bpf2a64[BPF_REG_0]; - - /* if (src == 0) return 0 */ - jmp_offset = 3; /* skip ahead to else path */ - check_imm19(jmp_offset); - emit(A64_CBNZ(is64, src, jmp_offset), ctx); - emit(A64_MOVZ(1, r0, 0, 0), ctx); - jmp_offset = epilogue_offset(ctx); - check_imm26(jmp_offset); - emit(A64_B(jmp_offset), ctx); - /* else */ switch (BPF_OP(code)) { case BPF_DIV: emit(A64_UDIV(is64, dst, dst, src), ctx); @@ -401,7 +401,6 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx) break; } break; - } case BPF_ALU | BPF_LSH | BPF_X: case BPF_ALU64 | BPF_LSH | BPF_X: emit(A64_LSLV(is64, dst, dst, src), ctx); @@ -605,7 +604,10 @@ emit_cond_jmp: const u8 r0 = bpf2a64[BPF_REG_0]; const u64 func = (u64)__bpf_call_base + imm; - emit_a64_mov_i64(tmp, func, ctx); + if (ctx->prog->is_func) + emit_addr_mov_i64(tmp, func, ctx); + else + emit_a64_mov_i64(tmp, func, ctx); emit(A64_BLR(tmp), ctx); emit(A64_MOV(1, r0, A64_R(0)), ctx); break; @@ -837,16 +839,24 @@ static inline void bpf_flush_icache(void *start, void *end) flush_icache_range((unsigned long)start, (unsigned long)end); } +struct arm64_jit_data { + struct bpf_binary_header *header; + u8 *image; + struct jit_ctx ctx; +}; + struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) { struct bpf_prog *tmp, *orig_prog = prog; struct bpf_binary_header *header; + struct arm64_jit_data *jit_data; bool tmp_blinded = false; + bool extra_pass = false; struct jit_ctx ctx; int image_size; u8 *image_ptr; - if (!bpf_jit_enable) + if (!prog->jit_requested) return orig_prog; tmp = bpf_jit_blind_constants(prog); @@ -860,13 +870,30 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) prog = tmp; } + jit_data = prog->aux->jit_data; + if (!jit_data) { + jit_data = kzalloc(sizeof(*jit_data), GFP_KERNEL); + if (!jit_data) { + prog = orig_prog; + goto out; + } + prog->aux->jit_data = jit_data; + } + if (jit_data->ctx.offset) { + ctx = jit_data->ctx; + image_ptr = jit_data->image; + header = jit_data->header; + extra_pass = true; + image_size = sizeof(u32) * ctx.idx; + goto skip_init_ctx; + } memset(&ctx, 0, sizeof(ctx)); ctx.prog = prog; ctx.offset = kcalloc(prog->len, sizeof(int), GFP_KERNEL); if (ctx.offset == NULL) { prog = orig_prog; - goto out; + goto out_off; } /* 1. Initial fake pass to compute ctx->idx. */ @@ -897,6 +924,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) /* 2. Now, the actual pass. */ ctx.image = (__le32 *)image_ptr; +skip_init_ctx: ctx.idx = 0; build_prologue(&ctx); @@ -922,13 +950,31 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) bpf_flush_icache(header, ctx.image + ctx.idx); - bpf_jit_binary_lock_ro(header); + if (!prog->is_func || extra_pass) { + if (extra_pass && ctx.idx != jit_data->ctx.idx) { + pr_err_once("multi-func JIT bug %d != %d\n", + ctx.idx, jit_data->ctx.idx); + bpf_jit_binary_free(header); + prog->bpf_func = NULL; + prog->jited = 0; + goto out_off; + } + bpf_jit_binary_lock_ro(header); + } else { + jit_data->ctx = ctx; + jit_data->image = image_ptr; + jit_data->header = header; + } prog->bpf_func = (void *)ctx.image; prog->jited = 1; prog->jited_len = image_size; + if (!prog->is_func || extra_pass) { out_off: - kfree(ctx.offset); + kfree(ctx.offset); + kfree(jit_data); + prog->aux->jit_data = NULL; + } out: if (tmp_blinded) bpf_jit_prog_release_other(prog, prog == orig_prog ? diff --git a/arch/arm64/xen/hypercall.S b/arch/arm64/xen/hypercall.S index 401ceb71540c..c5f05c4a4d00 100644 --- a/arch/arm64/xen/hypercall.S +++ b/arch/arm64/xen/hypercall.S @@ -101,12 +101,12 @@ ENTRY(privcmd_call) * need the explicit uaccess_enable/disable if the TTBR0 PAN emulation * is enabled (it implies that hardware UAO and PAN disabled). */ - uaccess_ttbr0_enable x6, x7 + uaccess_ttbr0_enable x6, x7, x8 hvc XEN_IMM /* * Disable userspace access from kernel once the hyp call completed. */ - uaccess_ttbr0_disable x6 + uaccess_ttbr0_disable x6, x7 ret ENDPROC(privcmd_call); |