diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/mach-msm/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/mach-msm/acpuclock-arm11.c | 523 | ||||
-rw-r--r-- | arch/arm/mach-msm/acpuclock.h | 32 | ||||
-rw-r--r-- | arch/arm/mach-msm/include/mach/board.h | 11 |
4 files changed, 567 insertions, 0 deletions
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 91e6f5c95dc1..0cb523fe3b3e 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -2,6 +2,7 @@ obj-y += io.o idle.o irq.o timer.o dma.o obj-y += devices.o obj-y += proc_comm.o obj-y += vreg.o +obj-y += acpuclock-arm11.o obj-y += clock.o clock-7x01a.o obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c new file mode 100644 index 000000000000..f9c9035bd9bb --- /dev/null +++ b/arch/arm/mach-msm/acpuclock-arm11.c @@ -0,0 +1,523 @@ +/* arch/arm/mach-msm/acpuclock.c + * + * MSM architecture clock driver + * + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2007 QUALCOMM Incorporated + * Author: San Mehat <san@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/mutex.h> +#include <linux/io.h> +#include <mach/board.h> +#include <mach/msm_iomap.h> + +#include "proc_comm.h" +#include "acpuclock.h" + + +#define A11S_CLK_CNTL_ADDR (MSM_CSR_BASE + 0x100) +#define A11S_CLK_SEL_ADDR (MSM_CSR_BASE + 0x104) +#define A11S_VDD_SVS_PLEVEL_ADDR (MSM_CSR_BASE + 0x124) + +/* + * ARM11 clock configuration for specific ACPU speeds + */ + +#define ACPU_PLL_TCXO -1 +#define ACPU_PLL_0 0 +#define ACPU_PLL_1 1 +#define ACPU_PLL_2 2 +#define ACPU_PLL_3 3 + +#define PERF_SWITCH_DEBUG 0 +#define PERF_SWITCH_STEP_DEBUG 0 + +struct clock_state +{ + struct clkctl_acpu_speed *current_speed; + struct mutex lock; + uint32_t acpu_switch_time_us; + uint32_t max_speed_delta_khz; + uint32_t vdd_switch_time_us; + unsigned long power_collapse_khz; + unsigned long wait_for_irq_khz; +}; + +static struct clk *ebi1_clk; +static struct clock_state drv_state = { 0 }; + +static void __init acpuclk_init(void); + +/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */ +enum { + VDD_0 = 0, + VDD_1 = 1, + VDD_2 = 2, + VDD_3 = 3, + VDD_4 = 3, + VDD_5 = 3, + VDD_6 = 3, + VDD_7 = 7, + VDD_END +}; + +struct clkctl_acpu_speed { + unsigned int a11clk_khz; + int pll; + unsigned int a11clk_src_sel; + unsigned int a11clk_src_div; + unsigned int ahbclk_khz; + unsigned int ahbclk_div; + int vdd; + unsigned int axiclk_khz; + unsigned long lpj; /* loops_per_jiffy */ +/* Index in acpu_freq_tbl[] for steppings. */ + short down; + short up; +}; + +/* + * ACPU speed table. Complete table is shown but certain speeds are commented + * out to optimized speed switching. Initalize loops_per_jiffy to 0. + * + * Table stepping up/down is optimized for 256mhz jumps while staying on the + * same PLL. + */ +#if (0) +static struct clkctl_acpu_speed acpu_freq_tbl[] = { + { 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 8 }, + { 61440, ACPU_PLL_0, 4, 3, 61440, 0, VDD_0, 30720, 0, 0, 8 }, + { 81920, ACPU_PLL_0, 4, 2, 40960, 1, VDD_0, 61440, 0, 0, 8 }, + { 96000, ACPU_PLL_1, 1, 7, 48000, 1, VDD_0, 61440, 0, 0, 9 }, + { 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 8 }, + { 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 12 }, + { 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 11 }, + { 192000, ACPU_PLL_1, 1, 3, 64000, 2, VDD_3, 61440, 0, 0, 12 }, + { 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 12 }, + { 256000, ACPU_PLL_1, 1, 2, 128000, 2, VDD_5, 128000, 0, 0, 12 }, + { 264000, ACPU_PLL_2, 2, 3, 88000, 2, VDD_5, 128000, 0, 6, 13 }, + { 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 6, 13 }, + { 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 5, -1 }, + { 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 11, -1 }, + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, +}; +#else /* Table of freq we currently use. */ +static struct clkctl_acpu_speed acpu_freq_tbl[] = { + { 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 4 }, + { 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 4 }, + { 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 6 }, + { 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 5 }, + { 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 5 }, + { 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 3, 7 }, + { 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 2, -1 }, + { 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 5, -1 }, + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, +}; +#endif + +static struct cpufreq_frequency_table freq_table[] = { + { 0, 122880 }, + { 1, 128000 }, + { 2, 245760 }, + { 3, 384000 }, + { 4, 528000 }, + { 5, CPUFREQ_TABLE_END }, +}; + +static int pc_pll_request(unsigned id, unsigned on) +{ + int res; + on = !!on; + +#if PERF_SWITCH_DEBUG + if (on) + printk(KERN_DEBUG "Enabling PLL %d\n", id); + else + printk(KERN_DEBUG "Disabling PLL %d\n", id); +#endif + + res = msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on); + if (res < 0) + return res; + +#if PERF_SWITCH_DEBUG + if (on) + printk(KERN_DEBUG "PLL %d enabled\n", id); + else + printk(KERN_DEBUG "PLL %d disabled\n", id); +#endif + return res; +} + + +/*---------------------------------------------------------------------------- + * ARM11 'owned' clock control + *---------------------------------------------------------------------------*/ + +unsigned long acpuclk_power_collapse(void) { + int ret = acpuclk_get_rate(); + ret *= 1000; + if (ret > drv_state.power_collapse_khz) + acpuclk_set_rate(drv_state.power_collapse_khz, 1); + return ret; +} + +unsigned long acpuclk_get_wfi_rate(void) +{ + return drv_state.wait_for_irq_khz; +} + +unsigned long acpuclk_wait_for_irq(void) { + int ret = acpuclk_get_rate(); + ret *= 1000; + if (ret > drv_state.wait_for_irq_khz) + acpuclk_set_rate(drv_state.wait_for_irq_khz, 1); + return ret; +} + +static int acpuclk_set_vdd_level(int vdd) +{ + uint32_t current_vdd; + + current_vdd = readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x07; + +#if PERF_SWITCH_DEBUG + printk(KERN_DEBUG "acpuclock: Switching VDD from %u -> %d\n", + current_vdd, vdd); +#endif + writel((1 << 7) | (vdd << 3), A11S_VDD_SVS_PLEVEL_ADDR); + udelay(drv_state.vdd_switch_time_us); + if ((readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x7) != vdd) { +#if PERF_SWITCH_DEBUG + printk(KERN_ERR "acpuclock: VDD set failed\n"); +#endif + return -EIO; + } + +#if PERF_SWITCH_DEBUG + printk(KERN_DEBUG "acpuclock: VDD switched\n"); +#endif + return 0; +} + +/* Set proper dividers for the given clock speed. */ +static void acpuclk_set_div(const struct clkctl_acpu_speed *hunt_s) { + uint32_t reg_clkctl, reg_clksel, clk_div; + + /* AHB_CLK_DIV */ + clk_div = (readl(A11S_CLK_SEL_ADDR) >> 1) & 0x03; + /* + * If the new clock divider is higher than the previous, then + * program the divider before switching the clock + */ + if (hunt_s->ahbclk_div > clk_div) { + reg_clksel = readl(A11S_CLK_SEL_ADDR); + reg_clksel &= ~(0x3 << 1); + reg_clksel |= (hunt_s->ahbclk_div << 1); + writel(reg_clksel, A11S_CLK_SEL_ADDR); + } + if ((readl(A11S_CLK_SEL_ADDR) & 0x01) == 0) { + /* SRC0 */ + + /* Program clock source */ + reg_clkctl = readl(A11S_CLK_CNTL_ADDR); + reg_clkctl &= ~(0x07 << 4); + reg_clkctl |= (hunt_s->a11clk_src_sel << 4); + writel(reg_clkctl, A11S_CLK_CNTL_ADDR); + + /* Program clock divider */ + reg_clkctl = readl(A11S_CLK_CNTL_ADDR); + reg_clkctl &= ~0xf; + reg_clkctl |= hunt_s->a11clk_src_div; + writel(reg_clkctl, A11S_CLK_CNTL_ADDR); + + /* Program clock source selection */ + reg_clksel = readl(A11S_CLK_SEL_ADDR); + reg_clksel |= 1; /* CLK_SEL_SRC1NO == SRC1 */ + writel(reg_clksel, A11S_CLK_SEL_ADDR); + } else { + /* SRC1 */ + + /* Program clock source */ + reg_clkctl = readl(A11S_CLK_CNTL_ADDR); + reg_clkctl &= ~(0x07 << 12); + reg_clkctl |= (hunt_s->a11clk_src_sel << 12); + writel(reg_clkctl, A11S_CLK_CNTL_ADDR); + + /* Program clock divider */ + reg_clkctl = readl(A11S_CLK_CNTL_ADDR); + reg_clkctl &= ~(0xf << 8); + reg_clkctl |= (hunt_s->a11clk_src_div << 8); + writel(reg_clkctl, A11S_CLK_CNTL_ADDR); + + /* Program clock source selection */ + reg_clksel = readl(A11S_CLK_SEL_ADDR); + reg_clksel &= ~1; /* CLK_SEL_SRC1NO == SRC0 */ + writel(reg_clksel, A11S_CLK_SEL_ADDR); + } + + /* + * If the new clock divider is lower than the previous, then + * program the divider after switching the clock + */ + if (hunt_s->ahbclk_div < clk_div) { + reg_clksel = readl(A11S_CLK_SEL_ADDR); + reg_clksel &= ~(0x3 << 1); + reg_clksel |= (hunt_s->ahbclk_div << 1); + writel(reg_clksel, A11S_CLK_SEL_ADDR); + } +} + +int acpuclk_set_rate(unsigned long rate, int for_power_collapse) +{ + uint32_t reg_clkctl; + struct clkctl_acpu_speed *cur_s, *tgt_s, *strt_s; + int rc = 0; + unsigned int plls_enabled = 0, pll; + + strt_s = cur_s = drv_state.current_speed; + + WARN_ONCE(cur_s == NULL, "acpuclk_set_rate: not initialized\n"); + if (cur_s == NULL) + return -ENOENT; + + if (rate == (cur_s->a11clk_khz * 1000)) + return 0; + + for (tgt_s = acpu_freq_tbl; tgt_s->a11clk_khz != 0; tgt_s++) { + if (tgt_s->a11clk_khz == (rate / 1000)) + break; + } + + if (tgt_s->a11clk_khz == 0) + return -EINVAL; + + /* Choose the highest speed speed at or below 'rate' with same PLL. */ + if (for_power_collapse && tgt_s->a11clk_khz < cur_s->a11clk_khz) { + while (tgt_s->pll != ACPU_PLL_TCXO && tgt_s->pll != cur_s->pll) + tgt_s--; + } + + if (strt_s->pll != ACPU_PLL_TCXO) + plls_enabled |= 1 << strt_s->pll; + + if (!for_power_collapse) { + mutex_lock(&drv_state.lock); + if (strt_s->pll != tgt_s->pll && tgt_s->pll != ACPU_PLL_TCXO) { + rc = pc_pll_request(tgt_s->pll, 1); + if (rc < 0) { + pr_err("PLL%d enable failed (%d)\n", + tgt_s->pll, rc); + goto out; + } + plls_enabled |= 1 << tgt_s->pll; + } + /* Increase VDD if needed. */ + if (tgt_s->vdd > cur_s->vdd) { + if ((rc = acpuclk_set_vdd_level(tgt_s->vdd)) < 0) { + printk(KERN_ERR "Unable to switch ACPU vdd\n"); + goto out; + } + } + } + + /* Set wait states for CPU inbetween frequency changes */ + reg_clkctl = readl(A11S_CLK_CNTL_ADDR); + reg_clkctl |= (100 << 16); /* set WT_ST_CNT */ + writel(reg_clkctl, A11S_CLK_CNTL_ADDR); + +#if PERF_SWITCH_DEBUG + printk(KERN_INFO "acpuclock: Switching from ACPU rate %u -> %u\n", + strt_s->a11clk_khz * 1000, tgt_s->a11clk_khz * 1000); +#endif + + while (cur_s != tgt_s) { + /* + * Always jump to target freq if within 256mhz, regulardless of + * PLL. If differnece is greater, use the predefinied + * steppings in the table. + */ + int d = abs((int)(cur_s->a11clk_khz - tgt_s->a11clk_khz)); + if (d > drv_state.max_speed_delta_khz) { + /* Step up or down depending on target vs current. */ + int clk_index = tgt_s->a11clk_khz > cur_s->a11clk_khz ? + cur_s->up : cur_s->down; + if (clk_index < 0) { /* This should not happen. */ + printk(KERN_ERR "cur:%u target: %u\n", + cur_s->a11clk_khz, tgt_s->a11clk_khz); + rc = -EINVAL; + goto out; + } + cur_s = &acpu_freq_tbl[clk_index]; + } else { + cur_s = tgt_s; + } +#if PERF_SWITCH_STEP_DEBUG + printk(KERN_DEBUG "%s: STEP khz = %u, pll = %d\n", + __FUNCTION__, cur_s->a11clk_khz, cur_s->pll); +#endif + if (!for_power_collapse&& cur_s->pll != ACPU_PLL_TCXO + && !(plls_enabled & (1 << cur_s->pll))) { + rc = pc_pll_request(cur_s->pll, 1); + if (rc < 0) { + pr_err("PLL%d enable failed (%d)\n", + cur_s->pll, rc); + goto out; + } + plls_enabled |= 1 << cur_s->pll; + } + + acpuclk_set_div(cur_s); + drv_state.current_speed = cur_s; + /* Re-adjust lpj for the new clock speed. */ + loops_per_jiffy = cur_s->lpj; + udelay(drv_state.acpu_switch_time_us); + } + + /* Nothing else to do for power collapse. */ + if (for_power_collapse) + return 0; + + /* Disable PLLs we are not using anymore. */ + plls_enabled &= ~(1 << tgt_s->pll); + for (pll = ACPU_PLL_0; pll <= ACPU_PLL_2; pll++) + if (plls_enabled & (1 << pll)) { + rc = pc_pll_request(pll, 0); + if (rc < 0) { + pr_err("PLL%d disable failed (%d)\n", pll, rc); + goto out; + } + } + + /* Change the AXI bus frequency if we can. */ + if (strt_s->axiclk_khz != tgt_s->axiclk_khz) { + rc = clk_set_rate(ebi1_clk, tgt_s->axiclk_khz * 1000); + if (rc < 0) + pr_err("Setting AXI min rate failed!\n"); + } + + /* Drop VDD level if we can. */ + if (tgt_s->vdd < strt_s->vdd) { + if (acpuclk_set_vdd_level(tgt_s->vdd) < 0) + printk(KERN_ERR "acpuclock: Unable to drop ACPU vdd\n"); + } + +#if PERF_SWITCH_DEBUG + printk(KERN_DEBUG "%s: ACPU speed change complete\n", __FUNCTION__); +#endif +out: + if (!for_power_collapse) + mutex_unlock(&drv_state.lock); + return rc; +} + +static void __init acpuclk_init(void) +{ + struct clkctl_acpu_speed *speed; + uint32_t div, sel; + int rc; + + /* + * Determine the rate of ACPU clock + */ + + if (!(readl(A11S_CLK_SEL_ADDR) & 0x01)) { /* CLK_SEL_SRC1N0 */ + /* CLK_SRC0_SEL */ + sel = (readl(A11S_CLK_CNTL_ADDR) >> 12) & 0x7; + /* CLK_SRC0_DIV */ + div = (readl(A11S_CLK_CNTL_ADDR) >> 8) & 0x0f; + } else { + /* CLK_SRC1_SEL */ + sel = (readl(A11S_CLK_CNTL_ADDR) >> 4) & 0x07; + /* CLK_SRC1_DIV */ + div = readl(A11S_CLK_CNTL_ADDR) & 0x0f; + } + + for (speed = acpu_freq_tbl; speed->a11clk_khz != 0; speed++) { + if (speed->a11clk_src_sel == sel + && (speed->a11clk_src_div == div)) + break; + } + if (speed->a11clk_khz == 0) { + printk(KERN_WARNING "Warning - ACPU clock reports invalid speed\n"); + return; + } + + drv_state.current_speed = speed; + + rc = clk_set_rate(ebi1_clk, speed->axiclk_khz * 1000); + if (rc < 0) + pr_err("Setting AXI min rate failed!\n"); + + printk(KERN_INFO "ACPU running at %d KHz\n", speed->a11clk_khz); +} + +unsigned long acpuclk_get_rate(void) +{ + WARN_ONCE(drv_state.current_speed == NULL, + "acpuclk_get_rate: not initialized\n"); + if (drv_state.current_speed) + return drv_state.current_speed->a11clk_khz; + else + return 0; +} + +uint32_t acpuclk_get_switch_time(void) +{ + return drv_state.acpu_switch_time_us; +} + +/*---------------------------------------------------------------------------- + * Clock driver initialization + *---------------------------------------------------------------------------*/ + +/* Initalize the lpj field in the acpu_freq_tbl. */ +static void __init lpj_init(void) +{ + int i; + const struct clkctl_acpu_speed *base_clk = drv_state.current_speed; + for (i = 0; acpu_freq_tbl[i].a11clk_khz; i++) { + acpu_freq_tbl[i].lpj = cpufreq_scale(loops_per_jiffy, + base_clk->a11clk_khz, + acpu_freq_tbl[i].a11clk_khz); + } +} + +void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *clkdata) +{ + pr_info("acpu_clock_init()\n"); + + ebi1_clk = clk_get(NULL, "ebi1_clk"); + + mutex_init(&drv_state.lock); + drv_state.acpu_switch_time_us = clkdata->acpu_switch_time_us; + drv_state.max_speed_delta_khz = clkdata->max_speed_delta_khz; + drv_state.vdd_switch_time_us = clkdata->vdd_switch_time_us; + drv_state.power_collapse_khz = clkdata->power_collapse_khz; + drv_state.wait_for_irq_khz = clkdata->wait_for_irq_khz; + acpuclk_init(); + lpj_init(); +#ifdef CONFIG_CPU_FREQ_TABLE + cpufreq_frequency_table_get_attr(freq_table, smp_processor_id()); +#endif +} diff --git a/arch/arm/mach-msm/acpuclock.h b/arch/arm/mach-msm/acpuclock.h new file mode 100644 index 000000000000..415de2eb9a5e --- /dev/null +++ b/arch/arm/mach-msm/acpuclock.h @@ -0,0 +1,32 @@ +/* arch/arm/mach-msm/acpuclock.h + * + * MSM architecture clock driver header + * + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2007 QUALCOMM Incorporated + * Author: San Mehat <san@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ARCH_ARM_MACH_MSM_ACPUCLOCK_H +#define __ARCH_ARM_MACH_MSM_ACPUCLOCK_H + +int acpuclk_set_rate(unsigned long rate, int for_power_collapse); +unsigned long acpuclk_get_rate(void); +uint32_t acpuclk_get_switch_time(void); +unsigned long acpuclk_wait_for_irq(void); +unsigned long acpuclk_power_collapse(void); +unsigned long acpuclk_get_wfi_rate(void); + + +#endif + diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h index 264d62e519f3..fb12fd87bb81 100644 --- a/arch/arm/mach-msm/include/mach/board.h +++ b/arch/arm/mach-msm/include/mach/board.h @@ -27,6 +27,16 @@ struct msm_mddi_platform_data unsigned has_vsync_irq:1; }; +struct msm_acpu_clock_platform_data +{ + uint32_t acpu_switch_time_us; + uint32_t max_speed_delta_khz; + uint32_t vdd_switch_time_us; + unsigned long power_collapse_khz; + unsigned long wait_for_irq_khz; +}; + + /* common init routines for use by arch/arm/mach-msm/board-*.c */ void __init msm_add_devices(void); @@ -34,5 +44,6 @@ void __init msm_map_common_io(void); void __init msm_init_irq(void); void __init msm_init_gpio(void); void __init msm_clock_init(void); +void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *); #endif |