diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/mach-sa1100/h3600.c | 139 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/include/mach/h3600.h | 23 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/include/mach/h3600_gpio.h | 22 |
3 files changed, 0 insertions, 184 deletions
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 5e6011ce36ee..6792dd14b6e7 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -49,9 +49,6 @@ #include "generic.h" -void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level); -EXPORT_SYMBOL(assign_h3600_egpio); - struct gpio_default_state { int gpio; int mode; @@ -306,72 +303,6 @@ static void __init h3xxx_map_io(void) #ifdef CONFIG_SA1100_H3100 -#define H3100_EGPIO (*(volatile unsigned int *)H3600_EGPIO_VIRT) -static unsigned int h3100_egpio = 0; - -static void h3100_control_egpio(enum ipaq_egpio_type x, int setp) -{ - unsigned int egpio = 0; - long gpio = 0; - unsigned long flags; - - switch (x) { - case IPAQ_EGPIO_LCD_POWER: - egpio |= EGPIO_H3600_LCD_ON; - gpio |= GPIO_H3100_LCD_3V_ON; - break; - case IPAQ_EGPIO_LCD_ENABLE: - break; - case IPAQ_EGPIO_CODEC_NRESET: - egpio |= EGPIO_H3600_CODEC_NRESET; - break; - case IPAQ_EGPIO_AUDIO_ON: - gpio |= GPIO_H3100_AUD_PWR_ON - | GPIO_H3100_AUD_ON; - break; - case IPAQ_EGPIO_QMUTE: - gpio |= GPIO_H3100_QMUTE; - break; - case IPAQ_EGPIO_OPT_NVRAM_ON: - egpio |= EGPIO_H3600_OPT_NVRAM_ON; - break; - case IPAQ_EGPIO_OPT_ON: - egpio |= EGPIO_H3600_OPT_ON; - break; - case IPAQ_EGPIO_CARD_RESET: - egpio |= EGPIO_H3600_CARD_RESET; - break; - case IPAQ_EGPIO_OPT_RESET: - egpio |= EGPIO_H3600_OPT_RESET; - break; - case IPAQ_EGPIO_IR_ON: - gpio |= GPIO_H3100_IR_ON; - break; - case IPAQ_EGPIO_IR_FSEL: - gpio |= GPIO_H3100_IR_FSEL; - break; - case IPAQ_EGPIO_RS232_ON: - egpio |= EGPIO_H3600_RS232_ON; - break; - case IPAQ_EGPIO_VPP_ON: - egpio |= EGPIO_H3600_VPP_ON; - break; - } - - if (egpio || gpio) { - local_irq_save(flags); - if (setp) { - h3100_egpio |= egpio; - GPSR = gpio; - } else { - h3100_egpio &= ~egpio; - GPCR = gpio; - } - H3100_EGPIO = h3100_egpio; - local_irq_restore(flags); - } -} - #define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON \ | GPIO_H3100_GPIO3 \ | GPIO_H3100_QMUTE \ @@ -409,9 +340,6 @@ static void __init h3100_map_io(void) /* Older bootldrs put GPIO2-9 in alternate mode on the assumption that they are used for video */ GAFR &= ~H3100_DIRECT_EGPIO; - - H3100_EGPIO = h3100_egpio; - assign_h3600_egpio = h3100_control_egpio; } /* @@ -465,70 +393,6 @@ MACHINE_END #ifdef CONFIG_SA1100_H3600 -#define H3600_EGPIO (*(volatile unsigned int *)H3600_EGPIO_VIRT) -static unsigned int h3600_egpio = EGPIO_H3600_RS232_ON; - -static void h3600_control_egpio(enum ipaq_egpio_type x, int setp) -{ - unsigned int egpio = 0; - unsigned long flags; - - switch (x) { - case IPAQ_EGPIO_LCD_POWER: - egpio |= EGPIO_H3600_LCD_ON | - EGPIO_H3600_LCD_PCI | - EGPIO_H3600_LCD_5V_ON | - EGPIO_H3600_LVDD_ON; - break; - case IPAQ_EGPIO_LCD_ENABLE: - break; - case IPAQ_EGPIO_CODEC_NRESET: - egpio |= EGPIO_H3600_CODEC_NRESET; - break; - case IPAQ_EGPIO_AUDIO_ON: - egpio |= EGPIO_H3600_AUD_AMP_ON | - EGPIO_H3600_AUD_PWR_ON; - break; - case IPAQ_EGPIO_QMUTE: - egpio |= EGPIO_H3600_QMUTE; - break; - case IPAQ_EGPIO_OPT_NVRAM_ON: - egpio |= EGPIO_H3600_OPT_NVRAM_ON; - break; - case IPAQ_EGPIO_OPT_ON: - egpio |= EGPIO_H3600_OPT_ON; - break; - case IPAQ_EGPIO_CARD_RESET: - egpio |= EGPIO_H3600_CARD_RESET; - break; - case IPAQ_EGPIO_OPT_RESET: - egpio |= EGPIO_H3600_OPT_RESET; - break; - case IPAQ_EGPIO_IR_ON: - egpio |= EGPIO_H3600_IR_ON; - break; - case IPAQ_EGPIO_IR_FSEL: - egpio |= EGPIO_H3600_IR_FSEL; - break; - case IPAQ_EGPIO_RS232_ON: - egpio |= EGPIO_H3600_RS232_ON; - break; - case IPAQ_EGPIO_VPP_ON: - egpio |= EGPIO_H3600_VPP_ON; - break; - } - - if (egpio) { - local_irq_save(flags); - if (setp) - h3600_egpio |= egpio; - else - h3600_egpio &= ~egpio; - H3600_EGPIO = h3600_egpio; - local_irq_restore(flags); - } -} - /* * helper for sa1100fb */ @@ -567,9 +431,6 @@ static void __init h3600_map_io(void) GPDR = GPIO_H3600_L3_CLOCK | GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA | GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0; - - H3600_EGPIO = h3600_egpio; /* Maintains across sleep? */ - assign_h3600_egpio = h3600_control_egpio; } /* diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h index 69f138c55407..19d7fe1b5874 100644 --- a/arch/arm/mach-sa1100/include/mach/h3600.h +++ b/arch/arm/mach-sa1100/include/mach/h3600.h @@ -66,27 +66,4 @@ #define IRQ_GPIO_H3600_OPT_IRQ IRQ_GPIO24 #define IRQ_GPIO_H3600_COM_CTS IRQ_GPIO25 - -#ifndef __ASSEMBLY__ - -enum ipaq_egpio_type { - IPAQ_EGPIO_LCD_POWER, /* Power to the LCD panel */ - IPAQ_EGPIO_CODEC_NRESET, /* Clear to reset the audio codec (remember to return high) */ - IPAQ_EGPIO_AUDIO_ON, /* Audio power */ - IPAQ_EGPIO_QMUTE, /* Audio muting */ - IPAQ_EGPIO_OPT_NVRAM_ON, /* Non-volatile RAM on extension sleeves (SPI interface) */ - IPAQ_EGPIO_OPT_ON, /* Power to extension sleeves */ - IPAQ_EGPIO_CARD_RESET, /* Reset PCMCIA cards on extension sleeve (???) */ - IPAQ_EGPIO_OPT_RESET, /* Reset option pack (???) */ - IPAQ_EGPIO_IR_ON, /* IR sensor/emitter power */ - IPAQ_EGPIO_IR_FSEL, /* IR speed selection 1->fast, 0->slow */ - IPAQ_EGPIO_RS232_ON, /* Maxim RS232 chip power */ - IPAQ_EGPIO_VPP_ON, /* Turn on power to flash programming */ - IPAQ_EGPIO_LCD_ENABLE, /* Enable/disable LCD controller */ -}; - -extern void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level); - -#endif /* ASSEMBLY */ - #endif /* _INCLUDE_H3600_H_ */ diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h index ce80f1ae0c1a..6cfbc649f189 100644 --- a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h +++ b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h @@ -76,28 +76,6 @@ #define IRQ_GPIO_H3600_ACTION_BUTTON IRQ_GPIO18 #define IRQ_GPIO_H3600_OPT_DET IRQ_GPIO27 -/* H3100 / 3600 EGPIO pins */ -#define EGPIO_H3600_VPP_ON (1 << 0) -#define EGPIO_H3600_CARD_RESET (1 << 1) /* reset the attached pcmcia/compactflash card. active high. */ -#define EGPIO_H3600_OPT_RESET (1 << 2) /* reset the attached option pack. active high. */ -#define EGPIO_H3600_CODEC_NRESET (1 << 3) /* reset the onboard UDA1341. active low. */ -#define EGPIO_H3600_OPT_NVRAM_ON (1 << 4) /* apply power to optionpack nvram, active high. */ -#define EGPIO_H3600_OPT_ON (1 << 5) /* full power to option pack. active high. */ -#define EGPIO_H3600_LCD_ON (1 << 6) /* enable 3.3V to LCD. active high. */ -#define EGPIO_H3600_RS232_ON (1 << 7) /* UART3 transceiver force on. Active high. */ - -/* H3600 only EGPIO pins */ -#define EGPIO_H3600_LCD_PCI (1 << 8) /* LCD control IC enable. active high. */ -#define EGPIO_H3600_IR_ON (1 << 9) /* apply power to IR module. active high. */ -#define EGPIO_H3600_AUD_AMP_ON (1 << 10) /* apply power to audio power amp. active high. */ -#define EGPIO_H3600_AUD_PWR_ON (1 << 11) /* apply power to reset of audio circuit. active high. */ -#define EGPIO_H3600_QMUTE (1 << 12) /* mute control for onboard UDA1341. active high. */ -#define EGPIO_H3600_IR_FSEL (1 << 13) /* IR speed select: 1->fast, 0->slow */ -#define EGPIO_H3600_LCD_5V_ON (1 << 14) /* enable 5V to LCD. active high. */ -#define EGPIO_H3600_LVDD_ON (1 << 15) /* enable 9V and -6.5V to LCD. */ - - -/* gpiolib versions of EGPIOs */ /* H3100 / 3600 EGPIO pins */ #define H3XXX_EGPIO_BASE (GPIO_MAX + 1) |