diff options
Diffstat (limited to 'arch/arm')
28 files changed, 583 insertions, 347 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 9762c84b4198..d597c6b8488b 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -386,6 +386,13 @@ choice when u-boot hands over to the kernel, the system silently crashes, with no serial output at all. + config DEBUG_VF_UART + bool "Vybrid UART" + depends on SOC_VF610 + help + Say Y here if you want kernel low-level debugging support + on Vybrid based platforms. + config DEBUG_NOMADIK_UART bool "Kernel low-level debugging messages via NOMADIK UART" depends on ARCH_NOMADIK @@ -906,6 +913,7 @@ config DEBUG_LL_INCLUDE default "debug/tegra.S" if DEBUG_TEGRA_UART default "debug/ux500.S" if DEBUG_UX500_UART default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT + default "debug/vf.S" if DEBUG_VF_UART default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "mach/debug-macro.S" diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index c46651e4d966..177d9e791a01 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -380,7 +380,9 @@ }; anatop: anatop@020c8000 { - compatible = "fsl,imx6sl-anatop", "syscon", "simple-bus"; + compatible = "fsl,imx6sl-anatop", + "fsl,imx6q-anatop", + "syscon", "simple-bus"; reg = <0x020c8000 0x1000>; interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 5d488c24b132..8d0c5a018ed7 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -132,7 +132,6 @@ CONFIG_TOUCHSCREEN_MC13783=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MMA8450=y CONFIG_SERIO_SERPORT=m -CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_IMX=y @@ -188,22 +187,33 @@ CONFIG_SND_SOC_PHYCORE_AC97=y CONFIG_SND_SOC_EUKREA_TLV320=y CONFIG_SND_SOC_IMX_WM8962=y CONFIG_SND_SOC_IMX_SGTL5000=y +CONFIG_SND_SOC_IMX_SPDIF=y CONFIG_SND_SOC_IMX_MC13783=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y CONFIG_USB_STORAGE=y CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_PHY=y CONFIG_NOP_USB_XCEIV=y CONFIG_USB_MXS_PHY=y +CONFIG_USB_GADGET=y +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_DRV_MC13XXX=y @@ -246,7 +256,6 @@ CONFIG_UDF_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=m CONFIG_JFFS2_FS=y CONFIG_UBIFS_FS=y CONFIG_NFS_FS=y @@ -261,6 +270,7 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set +CONFIG_PROVE_LOCKING=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FTRACE is not set # CONFIG_ARM_UNWIND is not set diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 4555c025629a..6150108e15de 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -76,7 +76,6 @@ CONFIG_INPUT_EVDEV=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_TSC2007=m # CONFIG_SERIO is not set -CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_DEVPTS_MULTIPLE_INSTANCES=y # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set @@ -91,7 +90,6 @@ CONFIG_I2C_MXS=y CONFIG_SPI=y CONFIG_SPI_GPIO=m CONFIG_SPI_MXS=y -CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y @@ -115,9 +113,12 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_PHY=y CONFIG_USB_MXS_PHY=y +CONFIG_USB_GADGET=y +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_MXS=y diff --git a/arch/arm/include/debug/vf.S b/arch/arm/include/debug/vf.S new file mode 100644 index 000000000000..ba12cc44b2cb --- /dev/null +++ b/arch/arm/include/debug/vf.S @@ -0,0 +1,26 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + + .macro addruart, rp, rv, tmp + ldr \rp, =0x40028000 @ physical + ldr \rv, =0xfe028000 @ virtual + .endm + + .macro senduart, rd, rx + strb \rd, [\rx, #0x7] @ Data Register + .endm + + .macro busyuart, rd, rx +1001: ldrb \rd, [\rx, #0x4] @ Status Register 1 + tst \rd, #1 << 6 @ TC + beq 1001b @ wait until transmit done + .endm + + .macro waituart,rd,rx + .endm diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 29a8af6922a8..270f78667dc6 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -11,6 +11,7 @@ config ARCH_MXC select GENERIC_IRQ_CHIP select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7 select MULTI_IRQ_HANDLER + select SOC_BUS select SPARSE_IRQ select USE_OF help @@ -24,7 +25,7 @@ config MXC_IRQ_PRIOR help Select this if you want to use prioritized IRQ handling. This feature prevents higher priority ISR to be interrupted - by lower priority IRQ even IRQF_DISABLED flag is not set. + by lower priority IRQ. This may be useful in embedded applications, where are strong requirements for timing. Say N here, unless you have a specialized requirement. @@ -801,6 +802,8 @@ config SOC_IMX6Q select HAVE_IMX_SRC select HAVE_SMP select MFD_SYSCON + select MIGHT_HAVE_PCI + select PCI_DOMAINS if PCI select PINCTRL select PINCTRL_IMX6Q select PL310_ERRATA_588369 if CACHE_PL310 diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 5383c589ad71..bbe1f5bb799c 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -102,6 +102,8 @@ obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o ifeq ($(CONFIG_PM),y) obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o +# i.MX6SL reuses pm-imx6q.c +obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o endif # i.MX5 based machines diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index ad3b755abb78..4a40bbb46183 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c @@ -16,6 +16,7 @@ #include <linux/mfd/syscon.h> #include <linux/regmap.h> #include "common.h" +#include "hardware.h" #define REG_SET 0x4 #define REG_CLR 0x8 @@ -26,6 +27,7 @@ #define ANADIG_USB1_CHRG_DETECT 0x1b0 #define ANADIG_USB2_CHRG_DETECT 0x210 #define ANADIG_DIGPROG 0x260 +#define ANADIG_DIGPROG_IMX6SL 0x280 #define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000 #define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000 @@ -76,21 +78,38 @@ static void imx_anatop_usb_chrg_detect_disable(void) BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); } -u32 imx_anatop_get_digprog(void) +void __init imx_init_revision_from_anatop(void) { struct device_node *np; void __iomem *anatop_base; - static u32 digprog; - - if (digprog) - return digprog; + unsigned int revision; + u32 digprog; + u16 offset = ANADIG_DIGPROG; np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); anatop_base = of_iomap(np, 0); WARN_ON(!anatop_base); - digprog = readl_relaxed(anatop_base + ANADIG_DIGPROG); + if (of_device_is_compatible(np, "fsl,imx6sl-anatop")) + offset = ANADIG_DIGPROG_IMX6SL; + digprog = readl_relaxed(anatop_base + offset); + iounmap(anatop_base); + + switch (digprog & 0xff) { + case 0: + revision = IMX_CHIP_REVISION_1_0; + break; + case 1: + revision = IMX_CHIP_REVISION_1_1; + break; + case 2: + revision = IMX_CHIP_REVISION_1_2; + break; + default: + revision = IMX_CHIP_REVISION_UNKNOWN; + } - return digprog; + mxc_set_cpu_type(digprog >> 16 & 0xff); + imx_set_soc_revision(revision); } void __init imx_anatop_init(void) diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index ceaac9cd7b42..ce37af26ff8c 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -14,6 +14,9 @@ #include <linux/clk-provider.h> #include <linux/of.h> #include <linux/err.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include "crm-regs-imx5.h" #include "clk.h" @@ -472,8 +475,9 @@ CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt); static void __init mx53_clocks_init(struct device_node *np) { - int i; + int i, irq; unsigned long r; + void __iomem *base; clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE); clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE); @@ -559,14 +563,17 @@ static void __init mx53_clocks_init(struct device_node *np) clk_set_rate(clk[esdhc_a_podf], 200000000); clk_set_rate(clk[esdhc_b_podf], 200000000); - /* System timer */ - mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT); - clk_prepare_enable(clk[iim_gate]); imx_print_silicon_rev("i.MX53", mx53_revision()); clk_disable_unprepare(clk[iim_gate]); r = clk_round_rate(clk[usboh3_per_gate], 54000000); clk_set_rate(clk[usboh3_per_gate], r); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt"); + base = of_iomap(np, 0); + WARN_ON(!base); + irq = irq_of_parse_and_map(np, 0); + mxc_timer_init(base, irq); } CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 9181a241d3a8..d756d91fd741 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -14,7 +14,6 @@ #include <linux/types.h> #include <linux/clk.h> #include <linux/clkdev.h> -#include <linux/delay.h> #include <linux/err.h> #include <linux/io.h> #include <linux/of.h> @@ -25,155 +24,6 @@ #include "common.h" #include "hardware.h" -#define CCR 0x0 -#define BM_CCR_WB_COUNT (0x7 << 16) -#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) -#define BM_CCR_RBC_EN (0x1 << 27) - -#define CCGR0 0x68 -#define CCGR1 0x6c -#define CCGR2 0x70 -#define CCGR3 0x74 -#define CCGR4 0x78 -#define CCGR5 0x7c -#define CCGR6 0x80 -#define CCGR7 0x84 - -#define CLPCR 0x54 -#define BP_CLPCR_LPM 0 -#define BM_CLPCR_LPM (0x3 << 0) -#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2) -#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) -#define BM_CLPCR_SBYOS (0x1 << 6) -#define BM_CLPCR_DIS_REF_OSC (0x1 << 7) -#define BM_CLPCR_VSTBY (0x1 << 8) -#define BP_CLPCR_STBY_COUNT 9 -#define BM_CLPCR_STBY_COUNT (0x3 << 9) -#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11) -#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16) -#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17) -#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19) -#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21) -#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22) -#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23) -#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24) -#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25) -#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) -#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) - -#define CGPR 0x64 -#define BM_CGPR_CHICKEN_BIT (0x1 << 17) - -static void __iomem *ccm_base; - -void imx6q_set_chicken_bit(void) -{ - u32 val = readl_relaxed(ccm_base + CGPR); - - val |= BM_CGPR_CHICKEN_BIT; - writel_relaxed(val, ccm_base + CGPR); -} - -static void imx6q_enable_rbc(bool enable) -{ - u32 val; - static bool last_rbc_mode; - - if (last_rbc_mode == enable) - return; - /* - * need to mask all interrupts in GPC before - * operating RBC configurations - */ - imx_gpc_mask_all(); - - /* configure RBC enable bit */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_RBC_EN; - val |= enable ? BM_CCR_RBC_EN : 0; - writel_relaxed(val, ccm_base + CCR); - - /* configure RBC count */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_RBC_BYPASS_COUNT; - val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; - writel(val, ccm_base + CCR); - - /* - * need to delay at least 2 cycles of CKIL(32K) - * due to hardware design requirement, which is - * ~61us, here we use 65us for safe - */ - udelay(65); - - /* restore GPC interrupt mask settings */ - imx_gpc_restore_all(); - - last_rbc_mode = enable; -} - -static void imx6q_enable_wb(bool enable) -{ - u32 val; - static bool last_wb_mode; - - if (last_wb_mode == enable) - return; - - /* configure well bias enable bit */ - val = readl_relaxed(ccm_base + CLPCR); - val &= ~BM_CLPCR_WB_PER_AT_LPM; - val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; - writel_relaxed(val, ccm_base + CLPCR); - - /* configure well bias count */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_WB_COUNT; - val |= enable ? BM_CCR_WB_COUNT : 0; - writel_relaxed(val, ccm_base + CCR); - - last_wb_mode = enable; -} - -int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) -{ - u32 val = readl_relaxed(ccm_base + CLPCR); - - val &= ~BM_CLPCR_LPM; - switch (mode) { - case WAIT_CLOCKED: - imx6q_enable_wb(false); - imx6q_enable_rbc(false); - break; - case WAIT_UNCLOCKED: - val |= 0x1 << BP_CLPCR_LPM; - val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; - break; - case STOP_POWER_ON: - val |= 0x2 << BP_CLPCR_LPM; - break; - case WAIT_UNCLOCKED_POWER_OFF: - val |= 0x1 << BP_CLPCR_LPM; - val &= ~BM_CLPCR_VSTBY; - val &= ~BM_CLPCR_SBYOS; - break; - case STOP_POWER_OFF: - val |= 0x2 << BP_CLPCR_LPM; - val |= 0x3 << BP_CLPCR_STBY_COUNT; - val |= BM_CLPCR_VSTBY; - val |= BM_CLPCR_SBYOS; - imx6q_enable_wb(true); - imx6q_enable_rbc(true); - break; - default: - return -EINVAL; - } - - writel_relaxed(val, ccm_base + CLPCR); - - return 0; -} - static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; @@ -182,7 +32,7 @@ static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", }; -static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", }; +static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", }; static const char *gpu_axi_sels[] = { "axi", "ahb", }; static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", }; static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; @@ -196,7 +46,7 @@ static const char *ipu2_di0_sels[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", }; static const char *pcie_axi_sels[] = { "axi", "ahb", }; -static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", }; +static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", }; static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", }; static const char *emi_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", }; @@ -205,7 +55,7 @@ static const char *vdo_axi_sels[] = { "axi", "ahb", }; static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div", "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0", - "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", }; + "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio_div", }; static const char *cko2_sels[] = { "mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1", "gpu2d_axi", "dummy", "ecspi_root", "gpu3d_axi", @@ -217,6 +67,11 @@ static const char *cko2_sels[] = { "uart_serial", "spdif", "asrc", "hsi_tx", }; static const char *cko_sels[] = { "cko1", "cko2", }; +static const char *lvds_sels[] = { + "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", + "pll4_audio", "pll5_video", "pll8_mlb", "enet_ref", + "pcie_ref", "sata_ref", +}; enum mx6q_clks { dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m, @@ -251,7 +106,8 @@ enum mx6q_clks { ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate, usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow, - spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, clk_max + spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div, + lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max }; static struct clk *clk[clk_max]; @@ -300,7 +156,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) WARN_ON(!base); /* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */ - if (cpu_is_imx6q() && imx6q_revision() == IMX_CHIP_REVISION_1_0) { + if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) { post_div_table[1].div = 1; post_div_table[2].div = 1; video_div_table[1].div = 1; @@ -342,6 +198,18 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) base + 0xe0, 0, 2, 0, clk_enet_ref_table, &imx_ccm_lock); + clk[lvds1_sel] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); + clk[lvds2_sel] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); + + /* + * lvds1_gate and lvds2_gate are pseudo-gates. Both can be + * independently configured as clock inputs or outputs. We treat + * the "output_enable" bit as a gate, even though it's really just + * enabling clock output. + */ + clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10); + clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11); + /* name parent_name reg idx */ clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); @@ -359,13 +227,15 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[twd] = imx_clk_fixed_factor("twd", "arm", 1, 2); clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); + clk[pll4_audio_div] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock); clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); np = ccm_node; base = of_iomap(np, 0); WARN_ON(!base); - ccm_base = base; + + imx6q_pm_set_ccm_base(base); /* name reg shift width parent_names num_parents */ clk[step] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); @@ -573,7 +443,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL); clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL); - if ((imx6q_revision() != IMX_CHIP_REVISION_1_0) || cpu_is_imx6dl()) { + if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) || + cpu_is_imx6dl()) { clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]); clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]); } @@ -603,8 +474,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) if (ret) pr_warn("failed to set up CLKO: %d\n", ret); - /* Set initial power mode */ - imx6q_set_lpm(WAIT_CLOCKED); + /* All existing boards with PCIe use LVDS1 */ + if (IS_ENABLED(CONFIG_PCI_IMX6)) + clk_set_parent(clk[lvds1_sel], clk[sata_ref]); np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c index a5c3c5d21aee..c0c4ef55e35b 100644 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -127,6 +127,9 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) base = of_iomap(np, 0); WARN_ON(!base); + /* Reuse imx6q pm code */ + imx6q_pm_set_ccm_base(base); + /* name reg shift width parent_names num_parents */ clks[IMX6SL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); clks[IMX6SL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 28e8ca0871e8..7cbe22d0c6e9 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -13,70 +13,73 @@ #include <linux/reboot.h> +struct irq_data; struct platform_device; struct pt_regs; struct clk; enum mxc_cpu_pwr_mode; -extern void mx1_map_io(void); -extern void mx21_map_io(void); -extern void mx25_map_io(void); -extern void mx27_map_io(void); -extern void mx31_map_io(void); -extern void mx35_map_io(void); -extern void mx51_map_io(void); -extern void mx53_map_io(void); -extern void imx1_init_early(void); -extern void imx21_init_early(void); -extern void imx25_init_early(void); -extern void imx27_init_early(void); -extern void imx31_init_early(void); -extern void imx35_init_early(void); -extern void imx51_init_early(void); -extern void imx53_init_early(void); -extern void mxc_init_irq(void __iomem *); -extern void tzic_init_irq(void __iomem *); -extern void mx1_init_irq(void); -extern void mx21_init_irq(void); -extern void mx25_init_irq(void); -extern void mx27_init_irq(void); -extern void mx31_init_irq(void); -extern void mx35_init_irq(void); -extern void mx51_init_irq(void); -extern void mx53_init_irq(void); -extern void imx1_soc_init(void); -extern void imx21_soc_init(void); -extern void imx25_soc_init(void); -extern void imx27_soc_init(void); -extern void imx31_soc_init(void); -extern void imx35_soc_init(void); -extern void imx51_soc_init(void); -extern void imx51_init_late(void); -extern void imx53_init_late(void); -extern void epit_timer_init(void __iomem *base, int irq); -extern void mxc_timer_init(void __iomem *, int); -extern int mx1_clocks_init(unsigned long fref); -extern int mx21_clocks_init(unsigned long lref, unsigned long fref); -extern int mx25_clocks_init(void); -extern int mx27_clocks_init(unsigned long fref); -extern int mx31_clocks_init(unsigned long fref); -extern int mx35_clocks_init(void); -extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, +void mx1_map_io(void); +void mx21_map_io(void); +void mx25_map_io(void); +void mx27_map_io(void); +void mx31_map_io(void); +void mx35_map_io(void); +void mx51_map_io(void); +void mx53_map_io(void); +void imx1_init_early(void); +void imx21_init_early(void); +void imx25_init_early(void); +void imx27_init_early(void); +void imx31_init_early(void); +void imx35_init_early(void); +void imx51_init_early(void); +void imx53_init_early(void); +void mxc_init_irq(void __iomem *); +void tzic_init_irq(void __iomem *); +void mx1_init_irq(void); +void mx21_init_irq(void); +void mx25_init_irq(void); +void mx27_init_irq(void); +void mx31_init_irq(void); +void mx35_init_irq(void); +void mx51_init_irq(void); +void mx53_init_irq(void); +void imx1_soc_init(void); +void imx21_soc_init(void); +void imx25_soc_init(void); +void imx27_soc_init(void); +void imx31_soc_init(void); +void imx35_soc_init(void); +void imx51_soc_init(void); +void imx51_init_late(void); +void imx53_init_late(void); +void epit_timer_init(void __iomem *base, int irq); +void mxc_timer_init(void __iomem *, int); +int mx1_clocks_init(unsigned long fref); +int mx21_clocks_init(unsigned long lref, unsigned long fref); +int mx25_clocks_init(void); +int mx27_clocks_init(unsigned long fref); +int mx31_clocks_init(unsigned long fref); +int mx35_clocks_init(void); +int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); -extern int mx25_clocks_init_dt(void); -extern int mx27_clocks_init_dt(void); -extern int mx31_clocks_init_dt(void); -extern struct platform_device *mxc_register_gpio(char *name, int id, +int mx25_clocks_init_dt(void); +int mx27_clocks_init_dt(void); +int mx31_clocks_init_dt(void); +struct platform_device *mxc_register_gpio(char *name, int id, resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); -extern void mxc_set_cpu_type(unsigned int type); -extern void mxc_restart(enum reboot_mode, const char *); -extern void mxc_arch_reset_init(void __iomem *); -extern void mxc_arch_reset_init_dt(void); -extern int mx53_revision(void); -extern int imx6q_revision(void); -extern int mx53_display_revision(void); -extern void imx_set_aips(void __iomem *); -extern int mxc_device_init(void); +void mxc_set_cpu_type(unsigned int type); +void mxc_restart(enum reboot_mode, const char *); +void mxc_arch_reset_init(void __iomem *); +void mxc_arch_reset_init_dt(void); +int mx53_revision(void); +void imx_set_aips(void __iomem *); +int mxc_device_init(void); +void imx_set_soc_revision(unsigned int rev); +unsigned int imx_get_soc_revision(void); +void imx_init_revision_from_anatop(void); +struct device *imx_soc_device_init(void); enum mxc_cpu_pwr_mode { WAIT_CLOCKED, /* wfi only */ @@ -93,8 +96,8 @@ enum mx3_cpu_pwr_mode { MX3_SLEEP, }; -extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode); -extern void imx_print_silicon_rev(const char *cpu, int srev); +void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode); +void imx_print_silicon_rev(const char *cpu, int srev); void avic_handle_irq(struct pt_regs *); void tzic_handle_irq(struct pt_regs *); @@ -108,54 +111,61 @@ void tzic_handle_irq(struct pt_regs *); #define imx51_handle_irq tzic_handle_irq #define imx53_handle_irq tzic_handle_irq -extern void imx_enable_cpu(int cpu, bool enable); -extern void imx_set_cpu_jump(int cpu, void *jump_addr); -extern u32 imx_get_cpu_arg(int cpu); -extern void imx_set_cpu_arg(int cpu, u32 arg); -extern void v7_cpu_resume(void); +void imx_enable_cpu(int cpu, bool enable); +void imx_set_cpu_jump(int cpu, void *jump_addr); +u32 imx_get_cpu_arg(int cpu); +void imx_set_cpu_arg(int cpu, u32 arg); +void v7_cpu_resume(void); #ifdef CONFIG_SMP -extern void v7_secondary_startup(void); -extern void imx_scu_map_io(void); -extern void imx_smp_prepare(void); -extern void imx_scu_standby_enable(void); +void v7_secondary_startup(void); +void imx_scu_map_io(void); +void imx_smp_prepare(void); +void imx_scu_standby_enable(void); #else static inline void imx_scu_map_io(void) {} static inline void imx_smp_prepare(void) {} static inline void imx_scu_standby_enable(void) {} #endif -extern void imx_src_init(void); -extern void imx_src_prepare_restart(void); -extern void imx_gpc_init(void); -extern void imx_gpc_pre_suspend(void); -extern void imx_gpc_post_resume(void); -extern void imx_gpc_mask_all(void); -extern void imx_gpc_restore_all(void); -extern void imx_anatop_init(void); -extern void imx_anatop_pre_suspend(void); -extern void imx_anatop_post_resume(void); -extern u32 imx_anatop_get_digprog(void); -extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); -extern void imx6q_set_chicken_bit(void); - -extern void imx_cpu_die(unsigned int cpu); -extern int imx_cpu_kill(unsigned int cpu); +void imx_src_init(void); +#ifdef CONFIG_HAVE_IMX_SRC +void imx_src_prepare_restart(void); +#else +static inline void imx_src_prepare_restart(void) {} +#endif +void imx_gpc_init(void); +void imx_gpc_pre_suspend(void); +void imx_gpc_post_resume(void); +void imx_gpc_mask_all(void); +void imx_gpc_restore_all(void); +void imx_gpc_irq_mask(struct irq_data *d); +void imx_gpc_irq_unmask(struct irq_data *d); +void imx_anatop_init(void); +void imx_anatop_pre_suspend(void); +void imx_anatop_post_resume(void); +int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); +void imx6q_set_chicken_bit(void); + +void imx_cpu_die(unsigned int cpu); +int imx_cpu_kill(unsigned int cpu); #ifdef CONFIG_PM -extern void imx6q_pm_init(void); -extern void imx5_pm_init(void); +void imx6q_pm_init(void); +void imx6q_pm_set_ccm_base(void __iomem *base); +void imx5_pm_init(void); #else static inline void imx6q_pm_init(void) {} +static inline void imx6q_pm_set_ccm_base(void __iomem *base) {} static inline void imx5_pm_init(void) {} #endif #ifdef CONFIG_NEON -extern int mx51_neon_fixup(void); +int mx51_neon_fixup(void); #else static inline int mx51_neon_fixup(void) { return 0; } #endif #ifdef CONFIG_CACHE_L2X0 -extern void imx_init_l2cache(void); +void imx_init_l2cache(void); #else static inline void imx_init_l2cache(void) {} #endif diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index e70e3acbf9bd..ba3b498a67ec 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -1,6 +1,9 @@ - +#include <linux/err.h> #include <linux/module.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> #include "hardware.h" #include "common.h" @@ -8,11 +11,23 @@ unsigned int __mxc_cpu_type; EXPORT_SYMBOL(__mxc_cpu_type); +static unsigned int imx_soc_revision; + void mxc_set_cpu_type(unsigned int type) { __mxc_cpu_type = type; } +void imx_set_soc_revision(unsigned int rev) +{ + imx_soc_revision = rev; +} + +unsigned int imx_get_soc_revision(void) +{ + return imx_soc_revision; +} + void imx_print_silicon_rev(const char *cpu, int srev) { if (srev == IMX_CHIP_REVISION_UNKNOWN) @@ -44,3 +59,81 @@ void __init imx_set_aips(void __iomem *base) reg = __raw_readl(base + 0x50) & 0x00FFFFFF; __raw_writel(reg, base + 0x50); } + +struct device * __init imx_soc_device_init(void) +{ + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + struct device_node *root; + const char *soc_id; + int ret; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return NULL; + + soc_dev_attr->family = "Freescale i.MX"; + + root = of_find_node_by_path("/"); + ret = of_property_read_string(root, "model", &soc_dev_attr->machine); + of_node_put(root); + if (ret) + goto free_soc; + + switch (__mxc_cpu_type) { + case MXC_CPU_MX1: + soc_id = "i.MX1"; + break; + case MXC_CPU_MX21: + soc_id = "i.MX21"; + break; + case MXC_CPU_MX25: + soc_id = "i.MX25"; + break; + case MXC_CPU_MX27: + soc_id = "i.MX27"; + break; + case MXC_CPU_MX31: + soc_id = "i.MX31"; + break; + case MXC_CPU_MX35: + soc_id = "i.MX35"; + break; + case MXC_CPU_MX51: + soc_id = "i.MX51"; + break; + case MXC_CPU_MX53: + soc_id = "i.MX53"; + break; + case MXC_CPU_IMX6SL: + soc_id = "i.MX6SL"; + break; + case MXC_CPU_IMX6DL: + soc_id = "i.MX6DL"; + break; + case MXC_CPU_IMX6Q: + soc_id = "i.MX6Q"; + break; + default: + soc_id = "Unknown"; + } + soc_dev_attr->soc_id = soc_id; + + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d", + (imx_soc_revision >> 4) & 0xf, + imx_soc_revision & 0xf); + if (!soc_dev_attr->revision) + goto free_soc; + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) + goto free_rev; + + return soc_device_to_device(soc_dev); + +free_rev: + kfree(soc_dev_attr->revision); +free_soc: + kfree(soc_dev_attr); + return NULL; +} diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c index e02de188ae83..074b1a81ba76 100644 --- a/arch/arm/mach-imx/epit.c +++ b/arch/arm/mach-imx/epit.c @@ -171,7 +171,7 @@ static irqreturn_t epit_timer_interrupt(int irq, void *dev_id) static struct irqaction epit_timer_irq = { .name = "i.MX EPIT Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = epit_timer_interrupt, }; diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 44a65e9ff1fc..586e0171a652 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -90,7 +90,7 @@ void imx_gpc_restore_all(void) writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4); } -static void imx_gpc_irq_unmask(struct irq_data *d) +void imx_gpc_irq_unmask(struct irq_data *d) { void __iomem *reg; u32 val; @@ -105,7 +105,7 @@ static void imx_gpc_irq_unmask(struct irq_data *d) writel_relaxed(val, reg); } -static void imx_gpc_irq_mask(struct irq_data *d) +void imx_gpc_irq_mask(struct irq_data *d) { void __iomem *reg; u32 val; diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 3daf1ed90579..b35e99cc5e5b 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -52,7 +52,9 @@ void imx_cpu_die(unsigned int cpu) * the register being cleared to kill the cpu. */ imx_set_cpu_arg(cpu, ~0); - cpu_do_idle(); + + while (1) + cpu_do_idle(); } int imx_cpu_kill(unsigned int cpu) diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 368a6e3f5926..58b864a3fc20 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -404,8 +404,7 @@ static int armadillo5x0_sdhc1_init(struct device *dev, /* When supported the trigger type have to be BOTH */ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), - detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, + detect_irq, IRQF_TRIGGER_FALLING, "sdhc-detect", data); if (ret) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 3be0fa0e9796..0f9f24116daa 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -13,7 +13,6 @@ #include <linux/clk.h> #include <linux/clkdev.h> #include <linux/cpu.h> -#include <linux/delay.h> #include <linux/export.h> #include <linux/init.h> #include <linux/io.h> @@ -38,64 +37,6 @@ #include "cpuidle.h" #include "hardware.h" -static u32 chip_revision; - -int imx6q_revision(void) -{ - return chip_revision; -} - -static void __init imx6q_init_revision(void) -{ - u32 rev = imx_anatop_get_digprog(); - - switch (rev & 0xff) { - case 0: - chip_revision = IMX_CHIP_REVISION_1_0; - break; - case 1: - chip_revision = IMX_CHIP_REVISION_1_1; - break; - case 2: - chip_revision = IMX_CHIP_REVISION_1_2; - break; - default: - chip_revision = IMX_CHIP_REVISION_UNKNOWN; - } - - mxc_set_cpu_type(rev >> 16 & 0xff); -} - -static void imx6q_restart(enum reboot_mode mode, const char *cmd) -{ - struct device_node *np; - void __iomem *wdog_base; - - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-wdt"); - wdog_base = of_iomap(np, 0); - if (!wdog_base) - goto soft; - - imx_src_prepare_restart(); - - /* enable wdog */ - writew_relaxed(1 << 2, wdog_base); - /* write twice to ensure the request will not get ignored */ - writew_relaxed(1 << 2, wdog_base); - - /* wait for reset to assert ... */ - mdelay(500); - - pr_err("Watchdog reset failed to assert reset\n"); - - /* delay to allow the serial port to show the message */ - mdelay(50); - -soft: - /* we'll take a jump through zero as a poor second */ - soft_restart(0); -} - /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { @@ -190,12 +131,20 @@ static void __init imx6q_1588_init(void) static void __init imx6q_init_machine(void) { + struct device *parent; + imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", - imx6q_revision()); + imx_get_soc_revision()); + + mxc_arch_reset_init_dt(); + + parent = imx_soc_device_init(); + if (parent == NULL) + pr_warn("failed to initialize soc device\n"); imx6q_enet_phy_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); imx_anatop_init(); imx6q_pm_init(); @@ -270,7 +219,7 @@ static void __init imx6q_init_late(void) * WAIT mode is broken on TO 1.0 and 1.1, so there is no point * to run cpuidle on them. */ - if (imx6q_revision() > IMX_CHIP_REVISION_1_1) + if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1) imx6q_cpuidle_init(); if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) { @@ -287,7 +236,7 @@ static void __init imx6q_map_io(void) static void __init imx6q_init_irq(void) { - imx6q_init_revision(); + imx_init_revision_from_anatop(); imx_init_l2cache(); imx_src_init(); imx_gpc_init(); @@ -307,5 +256,5 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)") .init_machine = imx6q_init_machine, .init_late = imx6q_init_late, .dt_compat = imx6q_dt_compat, - .restart = imx6q_restart, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index c70bd7c64974..2f952e3fcf89 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -10,20 +10,51 @@ #include <linux/irqchip.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> +#include <linux/regmap.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "common.h" +static void __init imx6sl_fec_init(void) +{ + struct regmap *gpr; + + /* set FEC clock from internal PLL clock source */ + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sl-iomuxc-gpr"); + if (!IS_ERR(gpr)) { + regmap_update_bits(gpr, IOMUXC_GPR1, + IMX6SL_GPR1_FEC_CLOCK_MUX2_SEL_MASK, 0); + regmap_update_bits(gpr, IOMUXC_GPR1, + IMX6SL_GPR1_FEC_CLOCK_MUX1_SEL_MASK, 0); + } else { + pr_err("failed to find fsl,imx6sl-iomux-gpr regmap\n"); + } +} + static void __init imx6sl_init_machine(void) { + struct device *parent; + mxc_arch_reset_init_dt(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + parent = imx_soc_device_init(); + if (parent == NULL) + pr_warn("failed to initialize soc device\n"); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + + imx6sl_fec_init(); + imx_anatop_init(); + /* Reuse imx6q pm code */ + imx6q_pm_init(); } static void __init imx6sl_init_irq(void) { + imx_init_revision_from_anatop(); imx_init_l2cache(); imx_src_init(); imx_gpc_init(); diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 1ed916175d41..50044a21b388 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -311,7 +311,7 @@ static int mx31_3ds_sdhc1_init(struct device *dev, } ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), - detect_irq, IRQF_DISABLED | + detect_irq, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-detect", data); if (ret) { diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index bc0261e99d39..45303bd62902 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -371,8 +371,7 @@ static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq, #endif ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, - "sdhc-detect", data); + IRQF_TRIGGER_FALLING, "sdhc-detect", data); if (ret) goto err_gpio_free_2; diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index eb3cce38c70d..d1d52600f458 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/pinctrl/machine.h> +#include <linux/of_address.h> #include <asm/mach/map.h> @@ -88,8 +89,15 @@ void __init imx51_init_early(void) void __init imx53_init_early(void) { + struct device_node *np; + void __iomem *base; + mxc_set_cpu_type(MXC_CPU_MX53); - mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR)); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx53-iomuxc"); + base = of_iomap(np, 0); + WARN_ON(!base); + mxc_iomux_v3_init(base); imx_src_init(); } @@ -100,7 +108,14 @@ void __init mx51_init_irq(void) void __init mx53_init_irq(void) { - tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR)); + struct device_node *np; + void __iomem *base; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx53-tzic"); + base = of_iomap(np, 0); + WARN_ON(!base); + + tzic_init_irq(base); } static struct sdma_platform_data imx51_sdma_pdata __initdata = { diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c index d4361b80c5fb..649fe49ce85e 100644 --- a/arch/arm/mach-imx/mx31lilly-db.c +++ b/arch/arm/mach-imx/mx31lilly-db.c @@ -130,8 +130,7 @@ static int mxc_mmc1_init(struct device *dev, gpio_direction_input(gpio_wp); ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)), - detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, + detect_irq, IRQF_TRIGGER_FALLING, "MMC detect", data); if (ret) goto exit_free_wp; diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index 8629e5be7ecd..b08ab3ad4a6d 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -34,6 +34,7 @@ #define MXC_CPU_MX35 35 #define MXC_CPU_MX51 51 #define MXC_CPU_MX53 53 +#define MXC_CPU_IMX6SL 0x60 #define MXC_CPU_IMX6DL 0x61 #define MXC_CPU_IMX6Q 0x63 @@ -152,6 +153,11 @@ extern unsigned int __mxc_cpu_type; #endif #ifndef __ASSEMBLY__ +static inline bool cpu_is_imx6sl(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6SL; +} + static inline bool cpu_is_imx6dl(void) { return __mxc_cpu_type == MXC_CPU_IMX6DL; diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index 204942749e21..aecd9f8037e0 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -10,9 +10,15 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <linux/delay.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/irq.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> #include <linux/of.h> +#include <linux/of_address.h> +#include <linux/regmap.h> #include <linux/suspend.h> #include <asm/cacheflush.h> #include <asm/proc-fns.h> @@ -22,6 +28,147 @@ #include "common.h" #include "hardware.h" +#define CCR 0x0 +#define BM_CCR_WB_COUNT (0x7 << 16) +#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) +#define BM_CCR_RBC_EN (0x1 << 27) + +#define CLPCR 0x54 +#define BP_CLPCR_LPM 0 +#define BM_CLPCR_LPM (0x3 << 0) +#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2) +#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) +#define BM_CLPCR_SBYOS (0x1 << 6) +#define BM_CLPCR_DIS_REF_OSC (0x1 << 7) +#define BM_CLPCR_VSTBY (0x1 << 8) +#define BP_CLPCR_STBY_COUNT 9 +#define BM_CLPCR_STBY_COUNT (0x3 << 9) +#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11) +#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16) +#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17) +#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19) +#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21) +#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22) +#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23) +#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24) +#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25) +#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) +#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) + +#define CGPR 0x64 +#define BM_CGPR_CHICKEN_BIT (0x1 << 17) + +static void __iomem *ccm_base; + +void imx6q_set_chicken_bit(void) +{ + u32 val = readl_relaxed(ccm_base + CGPR); + + val |= BM_CGPR_CHICKEN_BIT; + writel_relaxed(val, ccm_base + CGPR); +} + +static void imx6q_enable_rbc(bool enable) +{ + u32 val; + + /* + * need to mask all interrupts in GPC before + * operating RBC configurations + */ + imx_gpc_mask_all(); + + /* configure RBC enable bit */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_EN; + val |= enable ? BM_CCR_RBC_EN : 0; + writel_relaxed(val, ccm_base + CCR); + + /* configure RBC count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_BYPASS_COUNT; + val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; + writel(val, ccm_base + CCR); + + /* + * need to delay at least 2 cycles of CKIL(32K) + * due to hardware design requirement, which is + * ~61us, here we use 65us for safe + */ + udelay(65); + + /* restore GPC interrupt mask settings */ + imx_gpc_restore_all(); +} + +static void imx6q_enable_wb(bool enable) +{ + u32 val; + + /* configure well bias enable bit */ + val = readl_relaxed(ccm_base + CLPCR); + val &= ~BM_CLPCR_WB_PER_AT_LPM; + val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; + writel_relaxed(val, ccm_base + CLPCR); + + /* configure well bias count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_WB_COUNT; + val |= enable ? BM_CCR_WB_COUNT : 0; + writel_relaxed(val, ccm_base + CCR); +} + +int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) +{ + struct irq_desc *iomuxc_irq_desc; + u32 val = readl_relaxed(ccm_base + CLPCR); + + val &= ~BM_CLPCR_LPM; + switch (mode) { + case WAIT_CLOCKED: + break; + case WAIT_UNCLOCKED: + val |= 0x1 << BP_CLPCR_LPM; + val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; + break; + case STOP_POWER_ON: + val |= 0x2 << BP_CLPCR_LPM; + break; + case WAIT_UNCLOCKED_POWER_OFF: + val |= 0x1 << BP_CLPCR_LPM; + val &= ~BM_CLPCR_VSTBY; + val &= ~BM_CLPCR_SBYOS; + break; + case STOP_POWER_OFF: + val |= 0x2 << BP_CLPCR_LPM; + val |= 0x3 << BP_CLPCR_STBY_COUNT; + val |= BM_CLPCR_VSTBY; + val |= BM_CLPCR_SBYOS; + if (cpu_is_imx6sl()) { + val |= BM_CLPCR_BYPASS_PMIC_READY; + val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; + } else { + val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; + } + break; + default: + return -EINVAL; + } + + /* + * Unmask the always pending IOMUXC interrupt #32 as wakeup source to + * deassert dsm_request signal, so that we can ensure dsm_request + * is not asserted when we're going to write CLPCR register to set LPM. + * After setting up LPM bits, we need to mask this wakeup source. + */ + iomuxc_irq_desc = irq_to_desc(32); + imx_gpc_irq_unmask(&iomuxc_irq_desc->irq_data); + writel_relaxed(val, ccm_base + CLPCR); + imx_gpc_irq_mask(&iomuxc_irq_desc->irq_data); + + return 0; +} + static int imx6q_suspend_finish(unsigned long val) { cpu_do_idle(); @@ -33,14 +180,19 @@ static int imx6q_pm_enter(suspend_state_t state) switch (state) { case PM_SUSPEND_MEM: imx6q_set_lpm(STOP_POWER_OFF); + imx6q_enable_wb(true); + imx6q_enable_rbc(true); imx_gpc_pre_suspend(); imx_anatop_pre_suspend(); imx_set_cpu_jump(0, v7_cpu_resume); /* Zzz ... */ cpu_suspend(0, imx6q_suspend_finish); - imx_smp_prepare(); + if (cpu_is_imx6q() || cpu_is_imx6dl()) + imx_smp_prepare(); imx_anatop_post_resume(); imx_gpc_post_resume(); + imx6q_enable_rbc(false); + imx6q_enable_wb(false); imx6q_set_lpm(WAIT_CLOCKED); break; default: @@ -55,7 +207,29 @@ static const struct platform_suspend_ops imx6q_pm_ops = { .valid = suspend_valid_only_mem, }; +void __init imx6q_pm_set_ccm_base(void __iomem *base) +{ + ccm_base = base; +} + void __init imx6q_pm_init(void) { + struct regmap *gpr; + + WARN_ON(!ccm_base); + + /* + * Force IOMUXC irq pending, so that the interrupt to GPC can be + * used to deassert dsm_request signal when the signal gets + * asserted unexpectedly. + */ + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (!IS_ERR(gpr)) + regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT, + IMX6Q_GPR1_GINT); + + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + suspend_set_ops(&imx6q_pm_ops); } diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 10a6b1a8c5ac..4754373e7e7d 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -91,6 +91,7 @@ void imx_enable_cpu(int cpu, bool enable) spin_lock(&scr_lock); val = readl_relaxed(src_base + SRC_SCR); val = enable ? val | mask : val & ~mask; + val |= 1 << (BP_SRC_SCR_CORE1_RST + cpu - 1); writel_relaxed(val, src_base + SRC_SCR); spin_unlock(&scr_lock); } diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c index 80c177c36c5f..e6edcd38b282 100644 --- a/arch/arm/mach-imx/system.c +++ b/arch/arm/mach-imx/system.c @@ -42,6 +42,9 @@ void mxc_restart(enum reboot_mode mode, const char *cmd) { unsigned int wcr_enable; + if (cpu_is_imx6q() || cpu_is_imx6dl()) + imx_src_prepare_restart(); + if (wdog_clk) clk_enable(wdog_clk); @@ -52,6 +55,8 @@ void mxc_restart(enum reboot_mode mode, const char *cmd) /* Assert SRS signal */ __raw_writew(wcr_enable, wdog_base); + /* write twice to ensure the request will not get ignored */ + __raw_writew(wcr_enable, wdog_base); /* wait for reset to assert... */ mdelay(500); diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index cd46529e9eaa..9b6638aadeaa 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -250,7 +250,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) static struct irqaction mxc_timer_irq = { .name = "i.MX Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = mxc_timer_interrupt, }; |