diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/boot/dts/exynos5250.dtsi | 5 | ||||
-rw-r--r-- | arch/arm/boot/dts/integratorcp.dts | 9 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap3-beagle-xm.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap3.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/common/mcpm_entry.c | 6 | ||||
-rw-r--r-- | arch/arm/common/sharpsl_param.c | 5 | ||||
-rw-r--r-- | arch/arm/include/asm/Kbuild | 1 | ||||
-rw-r--r-- | arch/arm/include/asm/mcpm.h | 14 | ||||
-rw-r--r-- | arch/arm/include/asm/syscall.h | 6 | ||||
-rw-r--r-- | arch/arm/kernel/head.S | 21 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-generic.c | 18 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-rx51-peripherals.c | 9 | ||||
-rw-r--r-- | arch/arm/mach-omap2/gpmc-onenand.c | 12 | ||||
-rw-r--r-- | arch/arm/mach-omap2/mux.h | 4 | ||||
-rw-r--r-- | arch/arm/mach-omap2/timer.c | 4 | ||||
-rw-r--r-- | arch/arm/mm/dma-mapping.c | 43 | ||||
-rw-r--r-- | arch/arm/mm/init.c | 3 | ||||
-rw-r--r-- | arch/arm/net/bpf_jit_32.c | 1 |
18 files changed, 126 insertions, 41 deletions
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 7d7cc777ff7b..bbac42a78ce5 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -96,6 +96,11 @@ <1 14 0xf08>, <1 11 0xf08>, <1 10 0xf08>; + /* Unfortunately we need this since some versions of U-Boot + * on Exynos don't set the CNTFRQ register, so we need the + * value from DT. + */ + clock-frequency = <24000000>; }; mct@101C0000 { diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index ff1aea0ee043..72693a69f830 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -9,11 +9,6 @@ model = "ARM Integrator/CP"; compatible = "arm,integrator-cp"; - aliases { - arm,timer-primary = &timer2; - arm,timer-secondary = &timer1; - }; - chosen { bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk"; }; @@ -24,14 +19,18 @@ }; timer0: timer@13000000 { + /* TIMER0 runs @ 25MHz */ compatible = "arm,integrator-cp-timer"; + status = "disabled"; }; timer1: timer@13000100 { + /* TIMER1 runs @ 1MHz */ compatible = "arm,integrator-cp-timer"; }; timer2: timer@13000200 { + /* TIMER2 runs @ 1MHz */ compatible = "arm,integrator-cp-timer"; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 0c514dc8460c..2816bf612672 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -11,7 +11,7 @@ / { model = "TI OMAP3 BeagleBoard xM"; - compatible = "ti,omap3-beagle-xm", "ti,omap3-beagle", "ti,omap3"; + compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 7d95cda1fae4..b41bd57f4328 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -108,7 +108,7 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7f1f>; + pinctrl-single,function-mask = <0xff1f>; }; omap3_pmx_wkup: pinmux@0x48002a00 { @@ -117,7 +117,7 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7f1f>; + pinctrl-single,function-mask = <0xff1f>; }; gpio1: gpio@48310000 { diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index 370236dd1a03..990250965f2c 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -51,7 +51,8 @@ void mcpm_cpu_power_down(void) { phys_reset_t phys_reset; - BUG_ON(!platform_ops); + if (WARN_ON_ONCE(!platform_ops || !platform_ops->power_down)) + return; BUG_ON(!irqs_disabled()); /* @@ -93,7 +94,8 @@ void mcpm_cpu_suspend(u64 expected_residency) { phys_reset_t phys_reset; - BUG_ON(!platform_ops); + if (WARN_ON_ONCE(!platform_ops || !platform_ops->suspend)) + return; BUG_ON(!irqs_disabled()); /* Very similar to mcpm_cpu_power_down() */ diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c index d56c932580eb..025f6ce38596 100644 --- a/arch/arm/common/sharpsl_param.c +++ b/arch/arm/common/sharpsl_param.c @@ -15,6 +15,7 @@ #include <linux/module.h> #include <linux/string.h> #include <asm/mach/sharpsl_param.h> +#include <asm/memory.h> /* * Certain hardware parameters determined at the time of device manufacture, @@ -25,8 +26,10 @@ */ #ifdef CONFIG_ARCH_SA1100 #define PARAM_BASE 0xe8ffc000 +#define param_start(x) (void *)(x) #else #define PARAM_BASE 0xa0000a00 +#define param_start(x) __va(x) #endif #define MAGIC_CHG(a,b,c,d) ( ( d << 24 ) | ( c << 16 ) | ( b << 8 ) | a ) @@ -41,7 +44,7 @@ EXPORT_SYMBOL(sharpsl_param); void sharpsl_save_param(void) { - memcpy(&sharpsl_param, (void *)PARAM_BASE, sizeof(struct sharpsl_param_info)); + memcpy(&sharpsl_param, param_start(PARAM_BASE), sizeof(struct sharpsl_param_info)); if (sharpsl_param.comadj_keyword != COMADJ_MAGIC) sharpsl_param.comadj=-1; diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 4e6838d4ddf6..1a7024b41351 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -31,6 +31,5 @@ generic-y += termbits.h generic-y += termios.h generic-y += timex.h generic-y += trace_clock.h -generic-y += types.h generic-y += unaligned.h generic-y += preempt.h diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h index 0f7b7620e9a5..fc82a88f5b69 100644 --- a/arch/arm/include/asm/mcpm.h +++ b/arch/arm/include/asm/mcpm.h @@ -76,8 +76,11 @@ int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster); * * This must be called with interrupts disabled. * - * This does not return. Re-entry in the kernel is expected via - * mcpm_entry_point. + * On success this does not return. Re-entry in the kernel is expected + * via mcpm_entry_point. + * + * This will return if mcpm_platform_register() has not been called + * previously in which case the caller should take appropriate action. */ void mcpm_cpu_power_down(void); @@ -98,8 +101,11 @@ void mcpm_cpu_power_down(void); * * This must be called with interrupts disabled. * - * This does not return. Re-entry in the kernel is expected via - * mcpm_entry_point. + * On success this does not return. Re-entry in the kernel is expected + * via mcpm_entry_point. + * + * This will return if mcpm_platform_register() has not been called + * previously in which case the caller should take appropriate action. */ void mcpm_cpu_suspend(u64 expected_residency); diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h index f1d96d4e8092..73ddd7239b33 100644 --- a/arch/arm/include/asm/syscall.h +++ b/arch/arm/include/asm/syscall.h @@ -57,6 +57,9 @@ static inline void syscall_get_arguments(struct task_struct *task, unsigned int i, unsigned int n, unsigned long *args) { + if (n == 0) + return; + if (i + n > SYSCALL_MAX_ARGS) { unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i; unsigned int n_bad = n + i - SYSCALL_MAX_ARGS; @@ -81,6 +84,9 @@ static inline void syscall_set_arguments(struct task_struct *task, unsigned int i, unsigned int n, const unsigned long *args) { + if (n == 0) + return; + if (i + n > SYSCALL_MAX_ARGS) { pr_warning("%s called with max args %d, handling only %d\n", __func__, i + n, SYSCALL_MAX_ARGS); diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 2c7cc1e03473..476de57dcef2 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -487,7 +487,26 @@ __fixup_smp: mrc p15, 0, r0, c0, c0, 5 @ read MPIDR and r0, r0, #0xc0000000 @ multiprocessing extensions and teq r0, #0x80000000 @ not part of a uniprocessor system? - moveq pc, lr @ yes, assume SMP + bne __fixup_smp_on_up @ no, assume UP + + @ Core indicates it is SMP. Check for Aegis SOC where a single + @ Cortex-A9 CPU is present but SMP operations fault. + mov r4, #0x41000000 + orr r4, r4, #0x0000c000 + orr r4, r4, #0x00000090 + teq r3, r4 @ Check for ARM Cortex-A9 + movne pc, lr @ Not ARM Cortex-A9, + + @ If a future SoC *does* use 0x0 as the PERIPH_BASE, then the + @ below address check will need to be #ifdef'd or equivalent + @ for the Aegis platform. + mrc p15, 4, r0, c15, c0 @ get SCU base address + teq r0, #0x0 @ '0' on actual UP A9 hardware + beq __fixup_smp_on_up @ So its an A9 UP + ldr r0, [r0, #4] @ read SCU Config + and r0, r0, #0x3 @ number of CPUs + teq r0, #0x0 @ is 1? + movne pc, lr __fixup_smp_on_up: adr r0, 1f diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 39c78387ddec..87162e1b94a5 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -129,6 +129,24 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .restart = omap3xxx_restart, MACHINE_END +static const char *omap36xx_boards_compat[] __initdata = { + "ti,omap36xx", + NULL, +}; + +DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3630_init_early, + .init_irq = omap_intc_of_init, + .handle_irq = omap3_intc_handle_irq, + .init_machine = omap_generic_init, + .init_late = omap3_init_late, + .init_time = omap3_sync32k_timer_init, + .dt_compat = omap36xx_boards_compat, + .restart = omap3xxx_restart, +MACHINE_END + static const char *omap3_gp_boards_compat[] __initdata = { "ti,omap3-beagle", "timll,omap3-devkit8000", diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index c3270c0f1fce..f6fe388af989 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -167,38 +167,47 @@ static struct lp55xx_led_config rx51_lp5523_led_config[] = { .name = "lp5523:kb1", .chan_nr = 0, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb2", .chan_nr = 1, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb3", .chan_nr = 2, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb4", .chan_nr = 3, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:b", .chan_nr = 4, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:g", .chan_nr = 5, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:r", .chan_nr = 6, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb5", .chan_nr = 7, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb6", .chan_nr = 8, .led_current = 50, + .max_current = 100, } }; diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 64b5a8346982..8b6876c98ce1 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -272,9 +272,19 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base) struct gpmc_timings t; int ret; - if (gpmc_onenand_data->of_node) + if (gpmc_onenand_data->of_node) { gpmc_read_settings_dt(gpmc_onenand_data->of_node, &onenand_async); + if (onenand_async.sync_read || onenand_async.sync_write) { + if (onenand_async.sync_write) + gpmc_onenand_data->flags |= + ONENAND_SYNC_READWRITE; + else + gpmc_onenand_data->flags |= ONENAND_SYNC_READ; + onenand_async.sync_read = false; + onenand_async.sync_write = false; + } + } omap2_onenand_set_async_mode(onenand_base); diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 5d2080ef7923..16f78a990d04 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -28,7 +28,7 @@ #define OMAP_PULL_UP (1 << 4) #define OMAP_ALTELECTRICALSEL (1 << 5) -/* 34xx specific mux bit defines */ +/* omap3/4/5 specific mux bit defines */ #define OMAP_INPUT_EN (1 << 8) #define OMAP_OFF_EN (1 << 9) #define OMAP_OFFOUT_EN (1 << 10) @@ -36,8 +36,6 @@ #define OMAP_OFF_PULL_EN (1 << 12) #define OMAP_OFF_PULL_UP (1 << 13) #define OMAP_WAKEUP_EN (1 << 14) - -/* 44xx specific mux bit defines */ #define OMAP_WAKEUP_EVENT (1 << 15) /* Active pin states */ diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index fa74a0625da1..ead48fa5715e 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -628,7 +628,7 @@ void __init omap4_local_timer_init(void) #endif /* CONFIG_HAVE_ARM_TWD */ #endif /* CONFIG_ARCH_OMAP4 */ -#ifdef CONFIG_SOC_OMAP5 +#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) void __init omap5_realtime_timer_init(void) { omap4_sync32k_timer_init(); @@ -636,7 +636,7 @@ void __init omap5_realtime_timer_init(void) clocksource_of_init(); } -#endif /* CONFIG_SOC_OMAP5 */ +#endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */ /** * omap_timer_init - build and register timer device with an diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index f5e1a8471714..1272ed202dde 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1232,7 +1232,8 @@ __iommu_create_mapping(struct device *dev, struct page **pages, size_t size) break; len = (j - i) << PAGE_SHIFT; - ret = iommu_map(mapping->domain, iova, phys, len, 0); + ret = iommu_map(mapping->domain, iova, phys, len, + IOMMU_READ|IOMMU_WRITE); if (ret < 0) goto fail; iova += len; @@ -1431,6 +1432,27 @@ static int arm_iommu_get_sgtable(struct device *dev, struct sg_table *sgt, GFP_KERNEL); } +static int __dma_direction_to_prot(enum dma_data_direction dir) +{ + int prot; + + switch (dir) { + case DMA_BIDIRECTIONAL: + prot = IOMMU_READ | IOMMU_WRITE; + break; + case DMA_TO_DEVICE: + prot = IOMMU_READ; + break; + case DMA_FROM_DEVICE: + prot = IOMMU_WRITE; + break; + default: + prot = 0; + } + + return prot; +} + /* * Map a part of the scatter-gather list into contiguous io address space */ @@ -1444,6 +1466,7 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg, int ret = 0; unsigned int count; struct scatterlist *s; + int prot; size = PAGE_ALIGN(size); *handle = DMA_ERROR_CODE; @@ -1460,7 +1483,9 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg, !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) __dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir); - ret = iommu_map(mapping->domain, iova, phys, len, 0); + prot = __dma_direction_to_prot(dir); + + ret = iommu_map(mapping->domain, iova, phys, len, prot); if (ret < 0) goto fail; count += len >> PAGE_SHIFT; @@ -1665,19 +1690,7 @@ static dma_addr_t arm_coherent_iommu_map_page(struct device *dev, struct page *p if (dma_addr == DMA_ERROR_CODE) return dma_addr; - switch (dir) { - case DMA_BIDIRECTIONAL: - prot = IOMMU_READ | IOMMU_WRITE; - break; - case DMA_TO_DEVICE: - prot = IOMMU_READ; - break; - case DMA_FROM_DEVICE: - prot = IOMMU_WRITE; - break; - default: - prot = 0; - } + prot = __dma_direction_to_prot(dir); ret = iommu_map(mapping->domain, dma_addr, page_to_phys(page), len, prot); if (ret < 0) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index febaee7ca57b..18ec4c504abf 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -17,7 +17,6 @@ #include <linux/nodemask.h> #include <linux/initrd.h> #include <linux/of_fdt.h> -#include <linux/of_reserved_mem.h> #include <linux/highmem.h> #include <linux/gfp.h> #include <linux/memblock.h> @@ -379,8 +378,6 @@ void __init arm_memblock_init(struct meminfo *mi, if (mdesc->reserve) mdesc->reserve(); - early_init_dt_scan_reserved_mem(); - /* * reserve memory for DMA contigouos allocations, * must come from DMA area inside low memory diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index f50d223a0bd3..99b44e0e8d86 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -930,4 +930,5 @@ void bpf_jit_free(struct sk_filter *fp) { if (fp->bpf_func != sk_run_filter) module_free(NULL, fp->bpf_func); + kfree(fp); } |