diff options
Diffstat (limited to 'arch/i386/Kconfig')
| -rw-r--r-- | arch/i386/Kconfig | 309 |
1 files changed, 1 insertions, 308 deletions
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 35d3cff30057..5383e5e2d9b7 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -155,309 +155,7 @@ config ES7000_CLUSTERED_APIC default y depends on SMP && X86_ES7000 && MPENTIUMIII -if !X86_ELAN - -choice - prompt "Processor family" - default M686 - -config M386 - bool "386" - ---help--- - This is the processor type of your CPU. This information is used for - optimizing purposes. In order to compile a kernel that can run on - all x86 CPU types (albeit not optimally fast), you can specify - "386" here. - - The kernel will not necessarily run on earlier architectures than - the one you have chosen, e.g. a Pentium optimized kernel will run on - a PPro, but not necessarily on a i486. - - Here are the settings recommended for greatest speed: - - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI - 486DLC/DLC2, UMC 486SX-S and NexGen Nx586. Only "386" kernels - will run on a 386 class machine. - - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or - SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S. - - "586" for generic Pentium CPUs lacking the TSC - (time stamp counter) register. - - "Pentium-Classic" for the Intel Pentium. - - "Pentium-MMX" for the Intel Pentium MMX. - - "Pentium-Pro" for the Intel Pentium Pro. - - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron. - - "Pentium-III" for the Intel Pentium III or Coppermine Celeron. - - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron. - - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D). - - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird). - - "Crusoe" for the Transmeta Crusoe series. - - "Efficeon" for the Transmeta Efficeon series. - - "Winchip-C6" for original IDT Winchip. - - "Winchip-2" for IDT Winchip 2. - - "Winchip-2A" for IDT Winchips with 3dNow! capabilities. - - "GeodeGX1" for Geode GX1 (Cyrix MediaGX). - - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3. - - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above). - - If you don't know what to do, choose "386". - -config M486 - bool "486" - help - Select this for a 486 series processor, either Intel or one of the - compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX, - DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or - U5S. - -config M586 - bool "586/K5/5x86/6x86/6x86MX" - help - Select this for an 586 or 686 series processor such as the AMD K5, - the Cyrix 5x86, 6x86 and 6x86MX. This choice does not - assume the RDTSC (Read Time Stamp Counter) instruction. - -config M586TSC - bool "Pentium-Classic" - help - Select this for a Pentium Classic processor with the RDTSC (Read - Time Stamp Counter) instruction for benchmarking. - -config M586MMX - bool "Pentium-MMX" - help - Select this for a Pentium with the MMX graphics/multimedia - extended instructions. - -config M686 - bool "Pentium-Pro" - help - Select this for Intel Pentium Pro chips. This enables the use of - Pentium Pro extended instructions, and disables the init-time guard - against the f00f bug found in earlier Pentiums. - -config MPENTIUMII - bool "Pentium-II/Celeron(pre-Coppermine)" - help - Select this for Intel chips based on the Pentium-II and - pre-Coppermine Celeron core. This option enables an unaligned - copy optimization, compiles the kernel with optimization flags - tailored for the chip, and applies any applicable Pentium Pro - optimizations. - -config MPENTIUMIII - bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon" - help - Select this for Intel chips based on the Pentium-III and - Celeron-Coppermine core. This option enables use of some - extended prefetch instructions in addition to the Pentium II - extensions. - -config MPENTIUMM - bool "Pentium M" - help - Select this for Intel Pentium M (not Pentium-4 M) - notebook chips. - -config MPENTIUM4 - bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon" - help - Select this for Intel Pentium 4 chips. This includes the - Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M - (not Pentium M) chips. This option enables compile flags - optimized for the chip, uses the correct cache shift, and - applies any applicable Pentium III optimizations. - -config MK6 - bool "K6/K6-II/K6-III" - help - Select this for an AMD K6-family processor. Enables use of - some extended instructions, and passes appropriate optimization - flags to GCC. - -config MK7 - bool "Athlon/Duron/K7" - help - Select this for an AMD Athlon K7-family processor. Enables use of - some extended instructions, and passes appropriate optimization - flags to GCC. - -config MK8 - bool "Opteron/Athlon64/Hammer/K8" - help - Select this for an AMD Opteron or Athlon64 Hammer-family processor. Enables - use of some extended instructions, and passes appropriate optimization - flags to GCC. - -config MCRUSOE - bool "Crusoe" - help - Select this for a Transmeta Crusoe processor. Treats the processor - like a 586 with TSC, and sets some GCC optimization flags (like a - Pentium Pro with no alignment requirements). - -config MEFFICEON - bool "Efficeon" - help - Select this for a Transmeta Efficeon processor. - -config MWINCHIPC6 - bool "Winchip-C6" - help - Select this for an IDT Winchip C6 chip. Linux and GCC - treat this chip as a 586TSC with some extended instructions - and alignment requirements. - -config MWINCHIP2 - bool "Winchip-2" - help - Select this for an IDT Winchip-2. Linux and GCC - treat this chip as a 586TSC with some extended instructions - and alignment requirements. - -config MWINCHIP3D - bool "Winchip-2A/Winchip-3" - help - Select this for an IDT Winchip-2A or 3. Linux and GCC - treat this chip as a 586TSC with some extended instructions - and alignment reqirements. Also enable out of order memory - stores for this CPU, which can increase performance of some - operations. - -config MGEODEGX1 - bool "GeodeGX1" - help - Select this for a Geode GX1 (Cyrix MediaGX) chip. - -config MCYRIXIII - bool "CyrixIII/VIA-C3" - help - Select this for a Cyrix III or C3 chip. Presently Linux and GCC - treat this chip as a generic 586. Whilst the CPU is 686 class, - it lacks the cmov extension which gcc assumes is present when - generating 686 code. - Note that Nehemiah (Model 9) and above will not boot with this - kernel due to them lacking the 3DNow! instructions used in earlier - incarnations of the CPU. - -config MVIAC3_2 - bool "VIA C3-2 (Nehemiah)" - help - Select this for a VIA C3 "Nehemiah". Selecting this enables usage - of SSE and tells gcc to treat the CPU as a 686. - Note, this kernel will not boot on older (pre model 9) C3s. - -endchoice - -config X86_GENERIC - bool "Generic x86 support" - help - Instead of just including optimizations for the selected - x86 variant (e.g. PII, Crusoe or Athlon), include some more - generic optimizations as well. This will make the kernel - perform better on x86 CPUs other than that selected. - - This is really intended for distributors who need more - generic optimizations. - -endif - -# -# Define implied options from the CPU selection here -# -config X86_CMPXCHG - bool - depends on !M386 - default y - -config X86_XADD - bool - depends on !M386 - default y - -config X86_L1_CACHE_SHIFT - int - default "7" if MPENTIUM4 || X86_GENERIC - default "4" if X86_ELAN || M486 || M386 - default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODEGX1 - default "6" if MK7 || MK8 || MPENTIUMM - -config RWSEM_GENERIC_SPINLOCK - bool - depends on M386 - default y - -config RWSEM_XCHGADD_ALGORITHM - bool - depends on !M386 - default y - -config GENERIC_CALIBRATE_DELAY - bool - default y - -config X86_PPRO_FENCE - bool - depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1 - default y - -config X86_F00F_BUG - bool - depends on M586MMX || M586TSC || M586 || M486 || M386 - default y - -config X86_WP_WORKS_OK - bool - depends on !M386 - default y - -config X86_INVLPG - bool - depends on !M386 - default y - -config X86_BSWAP - bool - depends on !M386 - default y - -config X86_POPAD_OK - bool - depends on !M386 - default y - -config X86_CMPXCHG64 - bool - depends on !M386 && !M486 - default y - -config X86_ALIGNMENT_16 - bool - depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1 - default y - -config X86_GOOD_APIC - bool - depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON - default y - -config X86_INTEL_USERCOPY - bool - depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON - default y - -config X86_USE_PPRO_CHECKSUM - bool - depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON - default y - -config X86_USE_3DNOW - bool - depends on MCYRIXIII || MK7 - default y - -config X86_OOSTORE - bool - depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR - default y +source "arch/i386/Kconfig.cpu" config HPET_TIMER bool "HPET Timer Support" @@ -570,11 +268,6 @@ config X86_VISWS_APIC depends on X86_VISWS default y -config X86_TSC - bool - depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ - default y - config X86_MCE bool "Machine Check Exception" depends on !X86_VOYAGER |