diff options
Diffstat (limited to 'arch/m68k/include')
| -rw-r--r-- | arch/m68k/include/asm/coldfire.h | 7 | ||||
| -rw-r--r-- | arch/m68k/include/asm/m520xsim.h | 40 |
2 files changed, 24 insertions, 23 deletions
diff --git a/arch/m68k/include/asm/coldfire.h b/arch/m68k/include/asm/coldfire.h index 8daea2cf202e..c7dce7e55686 100644 --- a/arch/m68k/include/asm/coldfire.h +++ b/arch/m68k/include/asm/coldfire.h @@ -31,14 +31,9 @@ * This is generally setup by the boards start up code. */ #define MCF_MBAR 0x10000000 -#if defined(CONFIG_M520x) -#define MCF_IPSBAR 0xFC000000 -#else #define MCF_IPSBAR 0x40000000 -#endif -#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M520x) +#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) #undef MCF_MBAR #define MCF_MBAR MCF_IPSBAR #endif diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h index afc21ad78f43..87f8ce73b318 100644 --- a/arch/m68k/include/asm/m520xsim.h +++ b/arch/m68k/include/asm/m520xsim.h @@ -19,7 +19,7 @@ /* * Define the 520x SIM register set addresses. */ -#define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */ +#define MCFICM_INTC0 0xFC048000 /* Base for Interrupt Ctrl 0 */ #define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ #define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ #define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ @@ -35,9 +35,9 @@ * address to the SIMR and CIMR registers (not offsets into IPSBAR). * The 520x family only has a single INTC unit. */ -#define MCFINTC0_SIMR (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_SIMR) -#define MCFINTC0_CIMR (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_CIMR) -#define MCFINTC0_ICR0 (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0) +#define MCFINTC0_SIMR (MCFICM_INTC0 + MCFINTC_SIMR) +#define MCFINTC0_CIMR (MCFICM_INTC0 + MCFINTC_CIMR) +#define MCFINTC0_ICR0 (MCFICM_INTC0 + MCFINTC_ICR0) #define MCFINTC1_SIMR (0) #define MCFINTC1_CIMR (0) #define MCFINTC1_ICR0 (0) @@ -52,12 +52,12 @@ /* * SDRAM configuration registers. */ -#define MCFSIM_SDMR 0x000a8000 /* SDRAM Mode/Extended Mode Register */ -#define MCFSIM_SDCR 0x000a8004 /* SDRAM Control Register */ -#define MCFSIM_SDCFG1 0x000a8008 /* SDRAM Configuration Register 1 */ -#define MCFSIM_SDCFG2 0x000a800c /* SDRAM Configuration Register 2 */ -#define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */ -#define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */ +#define MCFSIM_SDMR 0xFC0a8000 /* SDRAM Mode/Extended Mode Register */ +#define MCFSIM_SDCR 0xFC0a8004 /* SDRAM Control Register */ +#define MCFSIM_SDCFG1 0xFC0a8008 /* SDRAM Configuration Register 1 */ +#define MCFSIM_SDCFG2 0xFC0a800c /* SDRAM Configuration Register 2 */ +#define MCFSIM_SDCS0 0xFC0a8110 /* SDRAM Chip Select 0 Configuration */ +#define MCFSIM_SDCS1 0xFC0a8114 /* SDRAM Chip Select 1 Configuration */ /* * EPORT and GPIO registers. @@ -119,10 +119,10 @@ #define MCFGPIO_IRQ_MAX 8 #define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE -#define MCF_GPIO_PAR_UART (0xA4036) -#define MCF_GPIO_PAR_FECI2C (0xA4033) -#define MCF_GPIO_PAR_QSPI (0xA4034) -#define MCF_GPIO_PAR_FEC (0xA4038) +#define MCF_GPIO_PAR_UART 0xFC0A4036 +#define MCF_GPIO_PAR_FECI2C 0xFC0A4033 +#define MCF_GPIO_PAR_QSPI 0xFC0A4034 +#define MCF_GPIO_PAR_FEC 0xFC0A4038 #define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001) #define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0002) @@ -142,9 +142,15 @@ /* * UART module. */ -#define MCFUART_BASE1 0x60000 /* Base address of UART1 */ -#define MCFUART_BASE2 0x64000 /* Base address of UART2 */ -#define MCFUART_BASE3 0x68000 /* Base address of UART2 */ +#define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */ +#define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */ +#define MCFUART_BASE3 0xFC068000 /* Base address of UART2 */ + +/* + * FEC module. + */ +#define MCFFEC_BASE 0xFC030000 /* Base of FEC ethernet */ +#define MCFFEC_SIZE 0x800 /* Register set size */ /* * Reset Controll Unit. |