diff options
Diffstat (limited to 'arch/mips/Kconfig')
| -rw-r--r-- | arch/mips/Kconfig | 212 |
1 files changed, 10 insertions, 202 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 16ecea3c0813..0f09412e1b7f 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -15,121 +15,8 @@ choice prompt "System type" default SGI_IP22 -config MIPS_MTX1 - bool "4G Systems MTX-1 board" - select DMA_NONCOHERENT - select HW_HAS_PCI - select RESOURCES_64BIT if PCI - select SOC_AU1500 - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_BOSPORUS - bool "AMD Alchemy Bosporus board" - select SOC_AU1500 - select DMA_NONCOHERENT - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_PB1000 - bool "AMD Alchemy PB1000 board" - select SOC_AU1000 - select DMA_NONCOHERENT - select HW_HAS_PCI - select RESOURCES_64BIT if PCI - select SWAP_IO_SPACE - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_PB1100 - bool "AMD Alchemy PB1100 board" - select SOC_AU1100 - select DMA_NONCOHERENT - select HW_HAS_PCI - select RESOURCES_64BIT if PCI - select SWAP_IO_SPACE - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_PB1500 - bool "AMD Alchemy PB1500 board" - select SOC_AU1500 - select DMA_NONCOHERENT - select HW_HAS_PCI - select RESOURCES_64BIT if PCI - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_PB1550 - bool "AMD Alchemy PB1550 board" - select SOC_AU1550 - select DMA_NONCOHERENT - select HW_HAS_PCI - select MIPS_DISABLE_OBSOLETE_IDE - select RESOURCES_64BIT if PCI - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_PB1200 - bool "AMD Alchemy PB1200 board" - select SOC_AU1200 - select DMA_NONCOHERENT - select MIPS_DISABLE_OBSOLETE_IDE - select RESOURCES_64BIT if PCI - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_DB1000 - bool "AMD Alchemy DB1000 board" - select SOC_AU1000 - select DMA_NONCOHERENT - select HW_HAS_PCI - select RESOURCES_64BIT if PCI - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_DB1100 - bool "AMD Alchemy DB1100 board" - select SOC_AU1100 - select DMA_NONCOHERENT - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_DB1500 - bool "AMD Alchemy DB1500 board" - select SOC_AU1500 - select DMA_NONCOHERENT - select HW_HAS_PCI - select MIPS_DISABLE_OBSOLETE_IDE - select RESOURCES_64BIT if PCI - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_DB1550 - bool "AMD Alchemy DB1550 board" - select SOC_AU1550 - select HW_HAS_PCI - select DMA_NONCOHERENT - select MIPS_DISABLE_OBSOLETE_IDE - select RESOURCES_64BIT if PCI - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_DB1200 - bool "AMD Alchemy DB1200 board" - select SOC_AU1200 - select DMA_COHERENT - select MIPS_DISABLE_OBSOLETE_IDE - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_MIRAGE - bool "AMD Alchemy Mirage board" - select DMA_NONCOHERENT - select SOC_AU1500 - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN +config MACH_ALCHEMY + bool "Alchemy processor based machines" config BASLER_EXCITE bool "Basler eXcite smart camera" @@ -369,28 +256,6 @@ config MIPS_SIM This option enables support for MIPS Technologies MIPSsim software emulator. -config MOMENCO_JAGUAR_ATX - bool "Momentum Jaguar board" - select BOOT_ELF32 - select DMA_NONCOHERENT - select HW_HAS_PCI - select IRQ_CPU - select IRQ_CPU_RM7K - select IRQ_MV64340 - select LIMITED_DMA - select PCI_MARVELL - select RM7000_CPU_SCACHE - select SWAP_IO_SPACE - select SYS_HAS_CPU_RM9000 - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB - help - The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by - Momentum Computer <http://www.momenco.com/>. - config MOMENCO_OCELOT bool "Momentum Ocelot board" select DMA_NONCOHERENT @@ -446,29 +311,6 @@ config MOMENCO_OCELOT_C The Ocelot is a MIPS-based Single Board Computer (SBC) made by Momentum Computer <http://www.momenco.com/>. -config MOMENCO_OCELOT_G - bool "Momentum Ocelot-G board" - select DMA_NONCOHERENT - select HW_HAS_PCI - select IRQ_CPU - select IRQ_CPU_RM7K - select PCI_MARVELL - select RM7000_CPU_SCACHE - select SWAP_IO_SPACE - select SYS_HAS_CPU_RM7000 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if BROKEN - select SYS_SUPPORTS_BIG_ENDIAN - help - The Ocelot is a MIPS-based Single Board Computer (SBC) made by - Momentum Computer <http://www.momenco.com/>. - -config MIPS_XXS1500 - bool "MyCable XXS1500 board" - select DMA_NONCOHERENT - select SOC_AU1500 - select SYS_SUPPORTS_LITTLE_ENDIAN - config PNX8550_JBS bool "Philips PNX8550 based JBS board" select PNX8550 @@ -775,7 +617,6 @@ config TOSHIBA_JMR3927 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN - select TOSHIBA_BOARDS select GENERIC_HARDIRQS_NO__DO_IRQ config TOSHIBA_RBTX4927 @@ -791,7 +632,6 @@ config TOSHIBA_RBTX4927 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_KGDB - select TOSHIBA_BOARDS select GENERIC_HARDIRQS_NO__DO_IRQ help This Toshiba board is based on the TX4927 processor. Say Y here to @@ -811,7 +651,6 @@ config TOSHIBA_RBTX4938 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_KGDB - select TOSHIBA_BOARDS select GENERIC_HARDIRQS_NO__DO_IRQ help This Toshiba board is based on the TX4938 processor. Say Y here to @@ -819,11 +658,11 @@ config TOSHIBA_RBTX4938 endchoice +source "arch/mips/au1000/Kconfig" source "arch/mips/ddb5xxx/Kconfig" source "arch/mips/gt64120/ev64120/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" -source "arch/mips/momentum/Kconfig" source "arch/mips/pmc-sierra/Kconfig" source "arch/mips/sgi-ip27/Kconfig" source "arch/mips/sibyte/Kconfig" @@ -923,11 +762,6 @@ config GENERIC_ISA_DMA config I8259 bool -config LIMITED_DMA - bool - select HIGHMEM - select SYS_SUPPORTS_HIGHMEM - config MIPS_BONITO64 bool @@ -1013,33 +847,6 @@ config MIPS_RM9122 config PCI_MARVELL bool -config SOC_AU1000 - bool - select SOC_AU1X00 - -config SOC_AU1100 - bool - select SOC_AU1X00 - -config SOC_AU1500 - bool - select SOC_AU1X00 - -config SOC_AU1550 - bool - select SOC_AU1X00 - -config SOC_AU1200 - bool - select SOC_AU1X00 - -config SOC_AU1X00 - bool - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_APM_EMULATION - select SYS_SUPPORTS_KGDB - config SERIAL_RM9000 bool @@ -1081,9 +888,9 @@ config WDT_RM9000 choice prompt "Galileo Chip Clock" #default SYSCLK_83 if MIPS_EV64120 - depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G + depends on MIPS_EV64120 || MOMENCO_OCELOT default SYSCLK_83 if MIPS_EV64120 - default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G + default SYSCLK_100 if MOMENCO_OCELOT config SYSCLK_75 bool "75" if MIPS_EV64120 @@ -1092,7 +899,7 @@ config SYSCLK_83 bool "83.3" if MIPS_EV64120 config SYSCLK_100 - bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G + bool "100" if MIPS_EV64120 || MOMENCO_OCELOT endchoice @@ -1131,9 +938,6 @@ config ARC64 config BOOT_ELF64 bool -config TOSHIBA_BOARDS - bool - menu "CPU selection" choice @@ -1557,6 +1361,7 @@ config MIPS_MT_SMP bool "Use 1 TC on each available VPE for SMP" depends on SYS_SUPPORTS_MULTITHREADING select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_IRQ_EI select CPU_MIPSR2_SRS select MIPS_MT select NR_CPUS_DEFAULT_2 @@ -1572,6 +1377,7 @@ config MIPS_MT_SMTC #depends on CPU_MIPS64_R2 # once there is hardware ... depends on SYS_SUPPORTS_MULTITHREADING select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_IRQ_EI select CPU_MIPSR2_SRS select MIPS_MT select NR_CPUS_DEFAULT_8 @@ -1584,6 +1390,8 @@ config MIPS_MT_SMTC config MIPS_VPE_LOADER bool "VPE loader support." depends on SYS_SUPPORTS_MULTITHREADING + select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_IRQ_EI select MIPS_MT help Includes a loader for loading an elf relocatable object |