diff options
Diffstat (limited to 'arch/powerpc/boot')
181 files changed, 11791 insertions, 11856 deletions
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 72ee8c1fba48..15986e70799c 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -45,6 +45,7 @@ $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 +$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405 @@ -79,7 +80,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \ - gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c + gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c \ + treeboot-currituck.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -199,6 +201,7 @@ image-$(CONFIG_EP405) += dtbImage.ep405 image-$(CONFIG_HOTFOOT) += cuImage.hotfoot image-$(CONFIG_WALNUT) += treeImage.walnut image-$(CONFIG_ACADIA) += cuImage.acadia +image-$(CONFIG_OBS600) += uImage.obs600 # Board ports in arch/powerpc/platform/44x/Kconfig image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony @@ -212,6 +215,7 @@ image-$(CONFIG_WARP) += cuImage.warp image-$(CONFIG_YOSEMITE) += cuImage.yosemite image-$(CONFIG_ISS4xx) += treeImage.iss4xx \ treeImage.iss4xx-mpic +image-$(CONFIG_CURRITUCK) += treeImage.currituck # Board ports in arch/powerpc/platform/8xx/Kconfig image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads @@ -316,6 +320,12 @@ $(obj)/zImage.iseries: vmlinux $(obj)/uImage: vmlinux $(wrapperbits) $(call if_changed,wrap,uboot) +$(obj)/uImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) + +$(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb) + $(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h index 645a7c964e5f..cc73f7a95e26 100644 --- a/arch/powerpc/boot/dcr.h +++ b/arch/powerpc/boot/dcr.h @@ -9,6 +9,12 @@ }) #define mtdcr(rn, val) \ asm volatile("mtdcr %0,%1" : : "i"(rn), "r"(val)) +#define mfdcrx(rn) \ + ({ \ + unsigned long rval; \ + asm volatile("mfdcrx %0,%1" : "=r"(rval) : "r"(rn)); \ + rval; \ + }) /* 440GP/440GX SDRAM controller DCRs */ #define DCRN_SDRAM0_CFGADDR 0x010 diff --git a/arch/powerpc/boot/div64.S b/arch/powerpc/boot/div64.S index d271ab542673..bbcb8a4cc121 100644 --- a/arch/powerpc/boot/div64.S +++ b/arch/powerpc/boot/div64.S @@ -57,3 +57,55 @@ __div64_32: stw r8,4(r3) mr r3,r6 # return the remainder in r3 blr + +/* + * Extended precision shifts. + * + * Updated to be valid for shift counts from 0 to 63 inclusive. + * -- Gabriel + * + * R3/R4 has 64 bit value + * R5 has shift count + * result in R3/R4 + * + * ashrdi3: arithmetic right shift (sign propagation) + * lshrdi3: logical right shift + * ashldi3: left shift + */ + .globl __ashrdi3 +__ashrdi3: + subfic r6,r5,32 + srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count + addi r7,r5,32 # could be xori, or addi with -32 + slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count) + rlwinm r8,r7,0,32 # t3 = (count < 32) ? 32 : 0 + sraw r7,r3,r7 # t2 = MSW >> (count-32) + or r4,r4,r6 # LSW |= t1 + slw r7,r7,r8 # t2 = (count < 32) ? 0 : t2 + sraw r3,r3,r5 # MSW = MSW >> count + or r4,r4,r7 # LSW |= t2 + blr + + .globl __ashldi3 +__ashldi3: + subfic r6,r5,32 + slw r3,r3,r5 # MSW = count > 31 ? 0 : MSW << count + addi r7,r5,32 # could be xori, or addi with -32 + srw r6,r4,r6 # t1 = count > 31 ? 0 : LSW >> (32-count) + slw r7,r4,r7 # t2 = count < 32 ? 0 : LSW << (count-32) + or r3,r3,r6 # MSW |= t1 + slw r4,r4,r5 # LSW = LSW << count + or r3,r3,r7 # MSW |= t2 + blr + + .globl __lshrdi3 +__lshrdi3: + subfic r6,r5,32 + srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count + addi r7,r5,32 # could be xori, or addi with -32 + slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count) + srw r7,r3,r7 # t2 = count < 32 ? 0 : MSW >> (count-32) + or r4,r4,r6 # LSW |= t1 + srw r3,r3,r5 # MSW = MSW >> count + or r4,r4,r7 # LSW |= t2 + blr diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts index 261d10c4534b..227290db866d 100644 --- a/arch/powerpc/boot/dts/asp834x-redboot.dts +++ b/arch/powerpc/boot/dts/asp834x-redboot.dts @@ -256,7 +256,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <400000000>; interrupts = <9 0x8>; @@ -266,7 +266,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <400000000>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/currituck.dts b/arch/powerpc/boot/dts/currituck.dts new file mode 100644 index 000000000000..b801dd06e573 --- /dev/null +++ b/arch/powerpc/boot/dts/currituck.dts @@ -0,0 +1,237 @@ +/* + * Device Tree Source for IBM Embedded PPC 476 Platform + * + * Copyright © 2011 Tony Breeds IBM Corporation + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/memreserve/ 0x01f00000 0x00100000; // spin table + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "ibm,currituck"; + compatible = "ibm,currituck"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,476"; + reg = <0>; + clock-frequency = <1600000000>; // 1.6 GHz + timebase-frequency = <100000000>; // 100Mhz + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "ok"; + }; + cpu@1 { + device_type = "cpu"; + model = "PowerPC,476"; + reg = <1>; + clock-frequency = <1600000000>; // 1.6 GHz + timebase-frequency = <100000000>; // 100Mhz + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "disabled"; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x01f00000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // filled in by zImage + }; + + MPIC: interrupt-controller { + compatible = "chrp,open-pic"; + interrupt-controller; + dcr-reg = <0xffc00000 0x00040000>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + }; + + plb { + compatible = "ibm,plb6"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-frequency = <200000000>; // 200Mhz + + POB0: opb { + compatible = "ibm,opb-4xx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full + * 32-bit range + */ + ranges = <0x00000000 0x00000200 0x00000000 0x80000000 + 0x80000000 0x00000200 0x80000000 0x80000000>; + clock-frequency = <100000000>; + + UART0: serial@10000000 { + device_type = "serial"; + compatible = "ns16750", "ns16550"; + reg = <0x10000000 0x00000008>; + virtual-reg = <0xe1000000>; + clock-frequency = <1851851>; // PCIe refclk/MCGC0_CTL[UART] + current-speed = <115200>; + interrupt-parent = <&MPIC>; + interrupts = <34 2>; + }; + + IIC0: i2c@00000000 { + compatible = "ibm,iic-currituck", "ibm,iic"; + reg = <0x0 0x00000014>; + interrupt-parent = <&MPIC>; + interrupts = <79 2>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "stm,m41t80", "m41st85"; + reg = <0x68>; + }; + }; + }; + + PCIE0: pciex@10100000000 { // 4xGBIF1 + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0x80 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>; + + /* Inbound starting at 0 to memsize filled in by zImage */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 46 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 47 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 48 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 49 0x2 /* int D */>; + }; + + PCIE1: pciex@30100000000 { // 4xGBIF0 + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x00000301 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000300 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0x60 0x20>; + + ranges = <0x02000000 0x00000000 0x80000000 0x00000310 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x00000340 0x0 0x0 0x00010000>; + + /* Inbound starting at 0 to memsize filled in by zImage */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 38 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 39 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 40 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 41 0x2 /* int D */>; + }; + + PCIE2: pciex@38100000000 { // 2xGBIF0 + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x2>; /* port number */ + reg = <0x00000381 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000380 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0xA0 0x20>; + + ranges = <0x02000000 0x00000000 0x80000000 0x00000390 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x000003C0 0x0 0x0 0x00010000>; + + /* Inbound starting at 0 to memsize filled in by zImage */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 54 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 55 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 56 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 57 0x2 /* int D */>; + }; + + }; + + chosen { + linux,stdout-path = &UART0; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi new file mode 100644 index 000000000000..89af62637707 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi @@ -0,0 +1,248 @@ +/* + * MPC8536 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <24 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <25 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <25 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xb000 */ +&pci3 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <27 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <27 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8536-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8536-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8536-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-gpio-0.dtsi" + + /* mark compat w/8572 to get some erratum treatment */ + gpio-controller@f000 { + compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio"; + }; + + sata@18000 { + compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <74 0x2 0 0>; + }; + + sata@19000 { + compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + cell-index = <2>; + interrupts = <41 0x2 0 0>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8536-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-etsec1-0.dtsi" +/include/ "pq3-etsec1-timer-0.dtsi" + + usb@22000 { + compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <28 0x2 0 0>; + }; + + usb@23000 { + compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <46 0x2 0 0>; + }; + + ptp_clock@24e00 { + interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>; + }; + +/include/ "pq3-etsec1-2.dtsi" + + ethernet@26000 { + cell-index = <1>; + }; + + usb@2b000 { + compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr"; + reg = <0x2b000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <60 0x2 0 0>; + }; + +/include/ "pq3-esdhc-0.dtsi" +/include/ "pq3-sec3.0-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + + global-utilities@e0000 { + compatible = "fsl,mpc8536-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi new file mode 100644 index 000000000000..7de45a784df6 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi @@ -0,0 +1,63 @@ +/* + * MPC8536 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,MPC8536"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8536@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi new file mode 100644 index 000000000000..b68eb119faef --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi @@ -0,0 +1,191 @@ +/* + * MPC8544 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8544-lbc", "fsl,pq3-localbus", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <24 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <25 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <25 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xb000 */ +&pci3 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <27 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <27 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8544-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8544-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8544-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8544-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-etsec1-0.dtsi" +/include/ "pq3-etsec1-2.dtsi" + + ethernet@26000 { + cell-index = <1>; + }; + +/include/ "pq3-sec2.1-0.dtsi" +/include/ "pq3-mpic.dtsi" + + global-utilities@e0000 { + compatible = "fsl,mpc8544-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi new file mode 100644 index 000000000000..8777f9239d9e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi @@ -0,0 +1,63 @@ +/* + * MPC8544 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,MPC8544"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8544@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi new file mode 100644 index 000000000000..9d8023a69d7d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi @@ -0,0 +1,143 @@ +/* + * MPC8548 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8548-lbc", "fsl,pq3-localbus", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <24 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <25 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; +}; + +/* controller at 0xa000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8548-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8548-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-etsec1-0.dtsi" +/include/ "pq3-etsec1-1.dtsi" +/include/ "pq3-etsec1-2.dtsi" +/include/ "pq3-etsec1-3.dtsi" + +/include/ "pq3-sec2.1-0.dtsi" +/include/ "pq3-mpic.dtsi" + + global-utilities@e0000 { + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi new file mode 100644 index 000000000000..289f1218d755 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi @@ -0,0 +1,62 @@ +/* + * MPC8548 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,MPC8548"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi new file mode 100644 index 000000000000..64e7075a9cd4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi @@ -0,0 +1,270 @@ +/* + * MPC8568 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", "simple-bus"; + interrupts = <19 2 0 0>; + sleep = <&pmc 0x08000000>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <24 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + sleep = <&pmc 0x80000000>; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + sleep = <&pmc 0x20000000>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <48 2 0 0>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + sleep = <&pmc 0x00080000>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8568-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8568-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8568-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + + i2c-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000004>; + ranges; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" + + }; + + duart-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000002>; + ranges; + +/include/ "pq3-duart-0.dtsi" + + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8568-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" + dma@21300 { + sleep = <&pmc 0x00000400>; + }; + +/include/ "pq3-etsec1-0.dtsi" + ethernet@24000 { + sleep = <&pmc 0x00000080>; + }; + +/include/ "pq3-etsec1-1.dtsi" + ethernet@25000 { + sleep = <&pmc 0x00000040>; + }; + + par_io@e0100 { + reg = <0xe0100 0x100>; + device_type = "par_io"; + }; + +/include/ "pq3-sec2.1-0.dtsi" + crypto@30000 { + sleep = <&pmc 0x01000000>; + }; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-rmu-0.dtsi" + rmu@d3000 { + sleep = <&pmc 0x00040000>; + }; + + global-utilities@e0000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + ranges = <0 0xe0000 0x1000>; + fsl,has-rstcr; + + pmc: power@70 { + compatible = "fsl,mpc8568-pmc", + "fsl,mpc8548-pmc"; + reg = <0x70 0x20>; + }; + }; +}; + +&qe { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + sleep = <&pmc 0x00000800>; + brg-frequency = <0>; + bus-frequency = <396000000>; + fsl,qe-num-riscs = <2>; + fsl,qe-num-snums = <28>; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30 + interrupt-parent = <&mpic>; + }; + + spi@4c0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,spi"; + reg = <0x4c0 0x40>; + cell-index = <0>; + interrupts = <2>; + interrupt-parent = <&qeic>; + }; + + spi@500 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl,spi"; + reg = <0x500 0x40>; + interrupts = <1>; + interrupt-parent = <&qeic>; + }; + + ucc@2000 { + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + }; + + ucc@3000 { + cell-index = <2>; + reg = <0x3000 0x200>; + interrupts = <33>; + interrupt-parent = <&qeic>; + }; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x10000 0x10000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x10000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi new file mode 100644 index 000000000000..eacd62c5fe6c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi @@ -0,0 +1,65 @@ +/* + * MPC8568 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,MPC8568"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8568@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + sleep = <&pmc 0x00008000 // core + &pmc 0x00004000>; // timebase + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi new file mode 100644 index 000000000000..3e6346a4a183 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi @@ -0,0 +1,304 @@ +/* + * MPC8569 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; + sleep = <&pmc 0x08000000>; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + sleep = <&pmc 0x20000000>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <48 2 0 0>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + sleep = <&pmc 0x00080000>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8569-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8569-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8569-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + + i2c-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000004>; + ranges; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" + + }; + + duart-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000002>; + ranges; + +/include/ "pq3-duart-0.dtsi" + + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8569-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + sleep = <&pmc 0x00200000>; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x100>; + ranges = <0x0 0xe0100 0x100>; + device_type = "par_io"; + }; + +/include/ "pq3-sec3.1-0.dtsi" + crypto@30000 { + sleep = <&pmc 0x01000000>; + }; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-rmu-0.dtsi" + rmu@d3000 { + sleep = <&pmc 0x00040000>; + }; + + global-utilities@e0000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + ranges = <0 0xe0000 0x1000>; + fsl,has-rstcr; + + pmc: power@70 { + compatible = "fsl,mpc8569-pmc", + "fsl,mpc8548-pmc"; + reg = <0x70 0x20>; + }; + }; +}; + +&qe { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + sleep = <&pmc 0x00000800>; + brg-frequency = <0>; + bus-frequency = <0>; + fsl,qe-num-riscs = <4>; + fsl,qe-num-snums = <46>; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30 + interrupt-parent = <&mpic>; + }; + + timer@440 { + compatible = "fsl,mpc8569-qe-gtm", + "fsl,qe-gtm", "fsl,gtm"; + reg = <0x440 0x40>; + interrupts = <12 13 14 15>; + interrupt-parent = <&qeic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + + spi@4c0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8569-qe-spi", "fsl,spi"; + reg = <0x4c0 0x40>; + cell-index = <0>; + interrupts = <2>; + interrupt-parent = <&qeic>; + }; + + spi@500 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl,spi"; + reg = <0x500 0x40>; + interrupts = <1>; + interrupt-parent = <&qeic>; + }; + + usb@6c0 { + compatible = "fsl,mpc8569-qe-usb", + "fsl,mpc8323-qe-usb"; + reg = <0x6c0 0x40 0x8b00 0x100>; + interrupts = <11>; + interrupt-parent = <&qeic>; + }; + + ucc@2000 { + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + }; + + ucc@2200 { + cell-index = <3>; + reg = <0x2200 0x200>; + interrupts = <34>; + interrupt-parent = <&qeic>; + }; + + ucc@3000 { + cell-index = <2>; + reg = <0x3000 0x200>; + interrupts = <33>; + interrupt-parent = <&qeic>; + }; + + ucc@3200 { + cell-index = <4>; + reg = <0x3200 0x200>; + interrupts = <35>; + interrupt-parent = <&qeic>; + }; + + ucc@3400 { + cell-index = <6>; + reg = <0x3400 0x200>; + interrupts = <41>; + interrupt-parent = <&qeic>; + }; + + ucc@3600 { + cell-index = <8>; + reg = <0x3600 0x200>; + interrupts = <43>; + interrupt-parent = <&qeic>; + }; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x10000 0x20000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x20000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi new file mode 100644 index 000000000000..b07064d11930 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi @@ -0,0 +1,64 @@ +/* + * MPC8569 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,MPC8569"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8569@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + sleep = <&pmc 0x00008000 // core + &pmc 0x00004000>; // timebase + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi new file mode 100644 index 000000000000..d44e25a48734 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi @@ -0,0 +1,196 @@ +/* + * MPC8572 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <24 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <24 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <25 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <25 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8572-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8572-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x6000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-dma-1.dtsi" +/include/ "pq3-gpio-0.dtsi" + gpio-controller@f000 { + compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio"; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x100000>; // L2,1M + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-etsec1-0.dtsi" +/include/ "pq3-etsec1-timer-0.dtsi" + + ptp_clock@24e00 { + interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>; + }; + +/include/ "pq3-etsec1-1.dtsi" +/include/ "pq3-etsec1-2.dtsi" +/include/ "pq3-etsec1-3.dtsi" +/include/ "pq3-sec3.0-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + + global-utilities@e0000 { + compatible = "fsl,mpc8572-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi new file mode 100644 index 000000000000..ca188326c2ca --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi @@ -0,0 +1,70 @@ +/* + * MPC8572 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,MPC8572"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,8572@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi new file mode 100644 index 000000000000..bd9e163c764b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi @@ -0,0 +1,198 @@ +/* + * P1010/P1014 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc", "simple-bus"; + interrupts = <16 2 0 0 19 2 0 0>; +}; + +/* controller at 0x9000 */ +&pci0 { + compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1010-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1010-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1010-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-espi-0.dtsi" + spi0: spi@7000 { + fsl,espi-num-chipselects = <1>; + }; + +/include/ "pq3-gpio-0.dtsi" +/include/ "pq3-sata2-0.dtsi" +/include/ "pq3-sata2-1.dtsi" + + can0: can@1c000 { + compatible = "fsl,p1010-flexcan"; + reg = <0x1c000 0x1000>; + interrupts = <48 0x2 0 0>; + }; + + can1: can@1d000 { + compatible = "fsl,p1010-flexcan"; + reg = <0x1d000 0x1000>; + interrupts = <61 0x2 0 0>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1010-l2-cache-controller", + "fsl,p1014-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + fsl,sdhci-auto-cmd12; + }; + +/include/ "pq3-sec4.4-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: ethernet@b0000 { + queue-group@b0000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: ethernet@b1000 { + queue-group@b1000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + }; + +/include/ "pq3-etsec2-2.dtsi" + enet2: ethernet@b2000 { + queue-group@b2000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + + }; + + global-utilities@e0000 { + compatible = "fsl,p1010-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi new file mode 100644 index 000000000000..7354a8f90ea5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi @@ -0,0 +1,64 @@ +/* + * P1010/P1014 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P1010"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + can0 = &can0; + can1 = &can1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1010@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi new file mode 100644 index 000000000000..fc924c5ffebe --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi @@ -0,0 +1,174 @@ +/* + * P1020/P1011 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x9000 */ +&pci0 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1020-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1020-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1020-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-gpio-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1020-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" +/include/ "pq3-usb2-dr-1.dtsi" + +/include/ "pq3-esdhc-0.dtsi" +/include/ "pq3-sec3.3-0.dtsi" + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: enet0_grp2: ethernet@b0000 { + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: enet1_grp2: ethernet@b1000 { + }; + +/include/ "pq3-etsec2-2.dtsi" + enet2: enet2_grp2: ethernet@b2000 { + }; + + global-utilities@e0000 { + compatible = "fsl,p1020-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; + +/include/ "pq3-etsec2-grp2-0.dtsi" +/include/ "pq3-etsec2-grp2-1.dtsi" +/include/ "pq3-etsec2-grp2-2.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi new file mode 100644 index 000000000000..6f0376e554eb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi @@ -0,0 +1,68 @@ +/* + * P1020/P1011 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P1020"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1020@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1020@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi new file mode 100644 index 000000000000..38ba54d1e32e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi @@ -0,0 +1,225 @@ +/* + * P1021/P1012 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x9000 */ +&pci0 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1021-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1021-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1021-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-gpio-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1021-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" + +/include/ "pq3-esdhc-0.dtsi" +/include/ "pq3-sec3.3-0.dtsi" + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: enet0_grp2: ethernet@b0000 { + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: enet1_grp2: ethernet@b1000 { + }; + +/include/ "pq3-etsec2-2.dtsi" + enet2: enet2_grp2: ethernet@b2000 { + }; + + global-utilities@e0000 { + compatible = "fsl,p1021-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; + +&qe { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + fsl,qe-num-riscs = <1>; + fsl,qe-num-snums = <28>; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44 + }; + + ucc@2000 { + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2120 0x18>; + compatible = "fsl,ucc-mdio"; + }; + + ucc@2400 { + cell-index = <5>; + reg = <0x2400 0x200>; + interrupts = <40>; + interrupt-parent = <&qeic>; + }; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x10000 0x6000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x6000>; + }; + }; +}; + +/include/ "pq3-etsec2-grp2-0.dtsi" +/include/ "pq3-etsec2-grp2-1.dtsi" +/include/ "pq3-etsec2-grp2-2.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi new file mode 100644 index 000000000000..4abd54bc3308 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi @@ -0,0 +1,68 @@ +/* + * P1021/P1012 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P1021"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1021@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1021@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi new file mode 100644 index 000000000000..16239b199d0a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi @@ -0,0 +1,235 @@ +/* + * P1022/P1013 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x9000 */ +&pci0 { + compatible = "fsl,p1022-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,p1022-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xb000 */ +&pci2 { + compatible = "fsl,p1022-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1022-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1022-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1022-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-dma-1.dtsi" + dma@c300 { + dma00: dma-channel@0 { + compatible = "fsl,ssi-dma-channel"; + }; + dma01: dma-channel@80 { + compatible = "fsl,ssi-dma-channel"; + }; + }; + +/include/ "pq3-gpio-0.dtsi" + + display@10000 { + compatible = "fsl,diu", "fsl,p1022-diu"; + reg = <0x10000 1000>; + interrupts = <64 2 0 0>; + }; + + ssi@15000 { + compatible = "fsl,mpc8610-ssi"; + cell-index = <0>; + reg = <0x15000 0x100>; + interrupts = <75 2 0 0>; + fsl,playback-dma = <&dma00>; + fsl,capture-dma = <&dma01>; + fsl,fifo-depth = <15>; + }; + +/include/ "pq3-sata2-0.dtsi" +/include/ "pq3-sata2-1.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1022-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" +/include/ "pq3-usb2-dr-1.dtsi" + +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + fsl,sdhci-auto-cmd12; + }; + +/include/ "pq3-sec3.3-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: enet0_grp2: ethernet@b0000 { + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: enet1_grp2: ethernet@b1000 { + }; + + global-utilities@e0000 { + compatible = "fsl,p1022-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + power@e0070{ + compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc"; + reg = <0xe0070 0x20>; + }; + +}; + +/include/ "pq3-etsec2-grp2-0.dtsi" +/include/ "pq3-etsec2-grp2-1.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi new file mode 100644 index 000000000000..e930f4f7ca89 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi @@ -0,0 +1,68 @@ +/* + * P1022/P1013 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P1022"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1022@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1022@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi new file mode 100644 index 000000000000..b06bb4cc1fe8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi @@ -0,0 +1,224 @@ +/* + * P1023/P1017 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0xa000 */ +&pci0 { + compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + }; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + }; +}; + +/* controller at 0xb000 */ +&pci2 { + compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1023-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1023-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1023-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-gpio-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1023-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" + + crypto: crypto@300000 { + compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000 0x10000>; + ranges = <0 0x30000 0x10000>; + interrupts = <58 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <57 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <57 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.2-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; + }; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + + global-utilities@e0000 { + compatible = "fsl,p1023-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi new file mode 100644 index 000000000000..ac45f6d93385 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi @@ -0,0 +1,76 @@ +/* + * P1023/P1017 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P1023"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1023@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1023@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi new file mode 100644 index 000000000000..c041050561a7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi @@ -0,0 +1,194 @@ +/* + * P2020/P2010 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0xa000 */ +&pci0 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <25 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <25 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0x8000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <24 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <24 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p2020-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p2020-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p2020-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-espi-0.dtsi" + spi0: spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-dma-1.dtsi" +/include/ "pq3-gpio-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p2020-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2,512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" +/include/ "pq3-etsec1-0.dtsi" +/include/ "pq3-etsec1-timer-0.dtsi" + + ptp_clock@24e00 { + interrupts = <68 2 0 0 69 2 0 0 70 2 0 0>; + }; + + +/include/ "pq3-etsec1-1.dtsi" +/include/ "pq3-etsec1-2.dtsi" +/include/ "pq3-esdhc-0.dtsi" +/include/ "pq3-sec3.1-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + + global-utilities@e0000 { + compatible = "fsl,p2020-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi new file mode 100644 index 000000000000..3213288641d1 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi @@ -0,0 +1,69 @@ +/* + * P2020/P2010 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P2020"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P2020@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P2020@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi new file mode 100644 index 000000000000..234a399ddeb2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -0,0 +1,325 @@ +/* + * P2041/P2040 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x202000 */ +&pci2 { + compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 13>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@42000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x42000 0x1000>; + }; + dcsr-cpu-sb-proxy@43000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x43000 0x1000>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000>; + interrupts = <16 2 1 27>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p2041-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" +/include/ "qoriq-dma-1.dtsi" +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + sdhci,auto-cmd12; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + phy_type = "utmi"; + port0; + }; + +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + dr_mode = "host"; + phy_type = "utmi"; + }; + +/include/ "qoriq-sata2-0.dtsi" +/include/ "qoriq-sata2-1.dtsi" +/include/ "qoriq-sec4.2-0.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi new file mode 100644 index 000000000000..2d0a40d6b10f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi @@ -0,0 +1,111 @@ +/* + * P2041 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P2041"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500mc@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e500mc@1 { + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e500mc@2 { + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e500mc@3 { + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi new file mode 100644 index 000000000000..d41d08de7f7e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi @@ -0,0 +1,352 @@ +/* + * P3041 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x202000 */ +&pci2 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 13>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +/* controller at 0x203000 */ +&pci3 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 12>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 12>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p3041-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p3041-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p3041-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p3041-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@42000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x42000 0x1000>; + }; + dcsr-cpu-sb-proxy@43000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x43000 0x1000>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000>; + interrupts = <16 2 1 27>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p3041-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" +/include/ "qoriq-dma-1.dtsi" +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + sdhci,auto-cmd12; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + phy_type = "utmi"; + port0; + }; + +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + dr_mode = "host"; + phy_type = "utmi"; + }; + +/include/ "qoriq-sata2-0.dtsi" +/include/ "qoriq-sata2-1.dtsi" +/include/ "qoriq-sec4.2-0.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi new file mode 100644 index 000000000000..136def3536b6 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi @@ -0,0 +1,112 @@ +/* + * P3041 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P3041"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500mc@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e500mc@1 { + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e500mc@2 { + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e500mc@3 { + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi new file mode 100644 index 000000000000..a63edd195ae5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi @@ -0,0 +1,296 @@ +/* + * P3060 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@44000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu4>; + reg = <0x44000 0x1000>; + }; + dcsr-cpu-sb-proxy@45000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu5>; + reg = <0x45000 0x1000>; + }; + dcsr-cpu-sb-proxy@46000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu6>; + reg = <0x46000 0x1000>; + }; + dcsr-cpu-sb-proxy@47000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu7>; + reg = <0x47000 0x1000>; + }; + +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p3060-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x5000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + +/include/ "qoriq-rmu-0.dtsi" +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p3060-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" +/include/ "qoriq-dma-1.dtsi" +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" +/include/ "qoriq-usb2-dr-0.dtsi" +/include/ "qoriq-sec4.1-0.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi new file mode 100644 index 000000000000..00c8e70e7b90 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi @@ -0,0 +1,125 @@ +/* + * P3060 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P3060"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500mc@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e500mc@1 { + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu4: PowerPC,e500mc@4 { + device_type = "cpu"; + reg = <4>; + next-level-cache = <&L2_4>; + L2_4: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu5: PowerPC,e500mc@5 { + device_type = "cpu"; + reg = <5>; + next-level-cache = <&L2_5>; + L2_5: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu6: PowerPC,e500mc@6 { + device_type = "cpu"; + reg = <6>; + next-level-cache = <&L2_6>; + L2_6: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu7: PowerPC,e500mc@7 { + device_type = "cpu"; + reg = <7>; + next-level-cache = <&L2_7>; + L2_7: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi new file mode 100644 index 000000000000..8d35d2c1f694 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -0,0 +1,350 @@ +/* + * P4080/P4040 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p4080-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p4080-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x202000 */ +&pci2 { + compatible = "fsl,p4080-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 13>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-ddr@13000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr2>; + reg = <0x13000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@42000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x42000 0x1000>; + }; + dcsr-cpu-sb-proxy@43000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x43000 0x1000>; + }; + dcsr-cpu-sb-proxy@44000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu4>; + reg = <0x44000 0x1000>; + }; + dcsr-cpu-sb-proxy@45000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu5>; + reg = <0x45000 0x1000>; + }; + dcsr-cpu-sb-proxy@46000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu6>; + reg = <0x46000 0x1000>; + }; + dcsr-cpu-sb-proxy@47000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu7>; + reg = <0x47000 0x1000>; + }; + +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + ddr2: memory-controller@9000 { + compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller"; + reg = <0x9000 0x1000>; + interrupts = <16 2 1 22>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x5000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + +/include/ "qoriq-rmu-0.dtsi" +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p4080-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" +/include/ "qoriq-dma-1.dtsi" +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + voltage-ranges = <3300 3300>; + sdhci,auto-cmd12; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" +/include/ "qoriq-usb2-dr-0.dtsi" +/include/ "qoriq-sec4.0-0.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi new file mode 100644 index 000000000000..b9556ee3a639 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi @@ -0,0 +1,143 @@ +/* + * P4080/P4040 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P4080"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500mc@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e500mc@1 { + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e500mc@2 { + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e500mc@3 { + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu4: PowerPC,e500mc@4 { + device_type = "cpu"; + reg = <4>; + next-level-cache = <&L2_4>; + L2_4: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu5: PowerPC,e500mc@5 { + device_type = "cpu"; + reg = <5>; + next-level-cache = <&L2_5>; + L2_5: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu6: PowerPC,e500mc@6 { + device_type = "cpu"; + reg = <6>; + next-level-cache = <&L2_6>; + L2_6: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu7: PowerPC,e500mc@7 { + device_type = "cpu"; + reg = <7>; + next-level-cache = <&L2_7>; + L2_7: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi new file mode 100644 index 000000000000..914074b91a85 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi @@ -0,0 +1,355 @@ +/* + * P5020/5010 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x202000 */ +&pci2 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 13>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +/* controller at 0x203000 */ +&pci3 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 12>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 12>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-ddr@13000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr2>; + reg = <0x13000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + ddr2: memory-controller@9000 { + compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller"; + reg = <0x9000 0x1000>; + interrupts = <16 2 1 22>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p5020-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" +/include/ "qoriq-dma-1.dtsi" +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + sdhci,auto-cmd12; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + phy_type = "utmi"; + port0; + }; + +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + dr_mode = "host"; + phy_type = "utmi"; + }; + +/include/ "qoriq-sata2-0.dtsi" +/include/ "qoriq-sata2-1.dtsi" +/include/ "qoriq-sec4.2-0.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi new file mode 100644 index 000000000000..ae823a47584e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi @@ -0,0 +1,96 @@ +/* + * P5020/P5010 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P5020"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e5500@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e5500@1 { + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi new file mode 100644 index 000000000000..b5b37ad30e75 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi @@ -0,0 +1,66 @@ +/* + * PQ3 DMA device tree stub [ controller @ offset 0x21000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <20 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <21 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <22 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <23 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi new file mode 100644 index 000000000000..28cb8a55d807 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi @@ -0,0 +1,66 @@ +/* + * PQ3 DMA device tree stub [ controller @ offset 0xc300 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <76 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <77 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <78 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <79 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi new file mode 100644 index 000000000000..5e268fdb9d1f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi @@ -0,0 +1,51 @@ +/* + * PQ3 DUART device tree stub [ controller @ offset 0x4000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2 0 0>; +}; + +serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi new file mode 100644 index 000000000000..5743433e278e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 eSDHC device tree stub [ controller @ offset 0x2e000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sdhc@2e000 { + compatible = "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2 0 0>; + /* Filled in by U-Boot */ + clock-frequency = <0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi new file mode 100644 index 000000000000..75854b2e0391 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 eSPI device tree stub [ controller @ offset 0x7000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +spi@7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8536-espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi new file mode 100644 index 000000000000..a1979ae334a7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi @@ -0,0 +1,53 @@ +/* + * PQ3 eTSEC device tree stub [ @ offsets 0x24000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; +}; + +mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi new file mode 100644 index 000000000000..4c4fdde1ec2a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi @@ -0,0 +1,53 @@ +/* + * PQ3 eTSEC device tree stub [ @ offsets 0x25000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; +}; + +mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi new file mode 100644 index 000000000000..4b8ab438668a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi @@ -0,0 +1,53 @@ +/* + * PQ3 eTSEC device tree stub [ @ offsets 0x26000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>; +}; + +mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi new file mode 100644 index 000000000000..40c9137729ae --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi @@ -0,0 +1,53 @@ +/* + * PQ3 eTSEC device tree stub [ @ offsets 0x27000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>; +}; + +mdio@27520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x27520 0x20>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi new file mode 100644 index 000000000000..efe2ca04bce8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi @@ -0,0 +1,39 @@ +/* + * PQ3 eTSEC Timer (IEEE 1588) device tree stub [ @ offsets 0x24e00 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ptp_clock@24e00 { + compatible = "fsl,etsec-ptp"; + reg = <0x24e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi new file mode 100644 index 000000000000..1382fec9e8c5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi @@ -0,0 +1,60 @@ +/* + * PQ3 eTSEC2 device tree stub [ @ offsets 0x24000/0xb0000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +mdio@24000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-mdio"; + reg = <0x24000 0x1000 0xb0030 0x4>; +}; + +ethernet@b0000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + + queue-group@b0000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb0000 0x1000>; + interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi new file mode 100644 index 000000000000..221cd2ea5b31 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi @@ -0,0 +1,60 @@ +/* + * PQ3 eTSEC2 device tree stub [ @ offsets 0x25000/0xb1000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +mdio@25000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-tbi"; + reg = <0x25000 0x1000 0xb1030 0x4>; +}; + +ethernet@b1000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + + queue-group@b1000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb1000 0x1000>; + interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi new file mode 100644 index 000000000000..61456c317609 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi @@ -0,0 +1,59 @@ +/* + * PQ3 eTSEC2 device tree stub [ @ offsets 0x26000/0xb2000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +mdio@26000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-tbi"; + reg = <0x26000 0x1000 0xb1030 0x4>; +}; + +ethernet@b2000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + + queue-group@b2000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb2000 0x1000>; + interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi new file mode 100644 index 000000000000..034ab8fac22f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi @@ -0,0 +1,42 @@ +/* + * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb4000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&enet0_grp2 { + queue-group@b4000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb4000 0x1000>; + interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi new file mode 100644 index 000000000000..3be9ba3b374e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi @@ -0,0 +1,42 @@ +/* + * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb5000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&enet1_grp2 { + queue-group@b5000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb5000 0x1000>; + interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi new file mode 100644 index 000000000000..02a33457048c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi @@ -0,0 +1,42 @@ +/* + * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb6000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&enet2_grp2 { + queue-group@b6000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb6000 0x1000>; + interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi new file mode 100644 index 000000000000..72a3ef5945c1 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 GPIO device tree stub [ controller @ offset 0xf000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +gpio-controller@f000 { + #gpio-cells = <2>; + compatible = "fsl,pq3-gpio"; + reg = <0xf000 0x100>; + interrupts = <47 0x2 0 0>; + gpio-controller; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi new file mode 100644 index 000000000000..d1dd6fb82a78 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi @@ -0,0 +1,43 @@ +/* + * PQ3 I2C device tree stub [ controller @ offset 0x3000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2 0 0>; + dfsrr; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi new file mode 100644 index 000000000000..a9bd803e2090 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi @@ -0,0 +1,43 @@ +/* + * PQ3 I2C device tree stub [ controller @ offset 0x3100 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2 0 0>; + dfsrr; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi new file mode 100644 index 000000000000..8734cffae1a1 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi @@ -0,0 +1,42 @@ +/* + * PQ3 MPIC Timer (Group B) device tree stub [ controller @ offset 0x42100 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +timer@42100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x42100 0x100 0x42300 4>; + interrupts = <4 0 3 0 + 5 0 3 0 + 6 0 3 0 + 7 0 3 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi new file mode 100644 index 000000000000..5c8046065844 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi @@ -0,0 +1,66 @@ +/* + * PQ3 MPIC device tree stub [ controller @ offset 0x40000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <4>; + reg = <0x40000 0x40000>; + compatible = "fsl,mpic"; + device_type = "open-pic"; +}; + +timer@41100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x41100 0x100 0x41300 4>; + interrupts = <0 0 3 0 + 1 0 3 0 + 2 0 3 0 + 3 0 3 0>; +}; + +msi@41600 { + compatible = "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi new file mode 100644 index 000000000000..587ca9ffad7d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi @@ -0,0 +1,68 @@ +/* + * PQ3 RIO Message Unit device tree stub [ controller @ offset 0xd3000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +rmu: rmu@d3000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,srio-rmu"; + reg = <0xd3000 0x500>; + ranges = <0x0 0xd3000 0x500>; + + message-unit@0 { + compatible = "fsl,srio-msg-unit"; + reg = <0x0 0x100>; + interrupts = < + 53 2 0 0 /* msg1_tx_irq */ + 54 2 0 0>;/* msg1_rx_irq */ + }; + message-unit@100 { + compatible = "fsl,srio-msg-unit"; + reg = <0x100 0x100>; + interrupts = < + 55 2 0 0 /* msg2_tx_irq */ + 56 2 0 0>;/* msg2_rx_irq */ + }; + doorbell-unit@400 { + compatible = "fsl,srio-dbell-unit"; + reg = <0x400 0x80>; + interrupts = < + 49 2 0 0 /* bell_outb_irq */ + 50 2 0 0>;/* bell_inb_irq */ + }; + port-write-unit@4e0 { + compatible = "fsl,srio-port-write-unit"; + reg = <0x4e0 0x20>; + interrupts = <48 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi new file mode 100644 index 000000000000..3c28dd08d38b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi @@ -0,0 +1,40 @@ +/* + * PQ3 SATAv2 device tree stub [ controller @ offset 0x18000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sata@18000 { + compatible = "fsl,pq-sata-v2"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <74 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi new file mode 100644 index 000000000000..eefaf2855e3b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi @@ -0,0 +1,40 @@ +/* + * PQ3 SATAv2 device tree stub [ controller @ offset 0x19000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sata@19000 { + compatible = "fsl,pq-sata-v2"; + reg = <0x19000 0x1000>; + cell-index = <2>; + interrupts = <41 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi new file mode 100644 index 000000000000..02a5c7ae72d0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi @@ -0,0 +1,43 @@ +/* + * PQ3 Sec/Crypto 2.1 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 0 0>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xfe>; + fsl,descriptor-types-mask = <0x12b0ebf>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi new file mode 100644 index 000000000000..bba1ba44ccf0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi @@ -0,0 +1,45 @@ +/* + * PQ3 Sec/Crypto 3.0 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec3.0", + "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 0 0 58 2 0 0>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi new file mode 100644 index 000000000000..8f0a5669bee5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi @@ -0,0 +1,45 @@ +/* + * PQ3 Sec/Crypto 3.1 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec3.1", "fsl,sec3.0", + "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 0 0 58 2 0 0>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xbfe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi new file mode 100644 index 000000000000..c227f2748a24 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi @@ -0,0 +1,45 @@ +/* + * PQ3 Sec/Crypto 3.3 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0", + "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 0 0 58 2 0 0>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x97c>; + fsl,descriptor-types-mask = <0x3a30abf>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi new file mode 100644 index 000000000000..bf957a7fca2a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi @@ -0,0 +1,65 @@ +/* + * PQ3 Sec/Crypto 4.4 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec4.4", "fsl,sec4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000 0x10000>; + interrupts = <58 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <45 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi new file mode 100644 index 000000000000..185ab9dc3ecd --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 USB DR device tree stub [ controller @ offset 0x22000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +usb@22000 { + compatible = "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <28 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi new file mode 100644 index 000000000000..fe24cd612fff --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 USB DR device tree stub [ controller @ offset 0x23000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <46 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi new file mode 100644 index 000000000000..1aebf3ea4ca5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi @@ -0,0 +1,66 @@ +/* + * QorIQ DMA device tree stub [ controller @ offset 0x100000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma0: dma@100300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x100300 0x4>; + ranges = <0x0 0x100100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <28 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <29 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <30 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <31 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi new file mode 100644 index 000000000000..ecf5e180fe79 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi @@ -0,0 +1,66 @@ +/* + * QorIQ DMA device tree stub [ controller @ offset 0x101000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma1: dma@101300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x101300 0x4>; + ranges = <0x0 0x101100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <32 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <33 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <34 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <35 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi new file mode 100644 index 000000000000..225c07b4e8ab --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi @@ -0,0 +1,51 @@ +/* + * QorIQ DUART device tree stub [ controller @ offset 0x11c000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +serial0: serial@11c500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x11c500 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; +}; + +serial1: serial@11c600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x11c600 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi new file mode 100644 index 000000000000..d23233a56b91 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi @@ -0,0 +1,51 @@ +/* + * QorIQ DUART device tree stub [ controller @ offset 0x11d000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +serial2: serial@11d500 { + cell-index = <2>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x11d500 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; +}; + +serial3: serial@11d600 { + cell-index = <3>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x11d600 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi new file mode 100644 index 000000000000..20835ae216c7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi @@ -0,0 +1,40 @@ +/* + * QorIQ eSDHC device tree stub [ controller @ offset 0x114000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sdhc: sdhc@114000 { + compatible = "fsl,esdhc"; + reg = <0x114000 0x1000>; + interrupts = <48 2 0 0>; + clock-frequency = <0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi new file mode 100644 index 000000000000..6db06975e095 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ eSPI device tree stub [ controller @ offset 0x110000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +spi@110000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8536-espi"; + reg = <0x110000 0x1000>; + interrupts = <53 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi new file mode 100644 index 000000000000..cf714f5f68bc --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ GPIO device tree stub [ controller @ offset 0x130000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +gpio0: gpio@130000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x130000 0x1000>; + interrupts = <55 2 0 0>; + #gpio-cells = <2>; + gpio-controller; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi new file mode 100644 index 000000000000..5f9bf7debe4c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi @@ -0,0 +1,53 @@ +/* + * QorIQ I2C device tree stub [ controller @ offset 0x118000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +i2c@118000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x118000 0x100>; + interrupts = <38 2 0 0>; + dfsrr; +}; + +i2c@118100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x118100 0x100>; + interrupts = <38 2 0 0>; + dfsrr; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi new file mode 100644 index 000000000000..7989bf5eeb53 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi @@ -0,0 +1,53 @@ +/* + * QorIQ I2C device tree stub [ controller @ offset 0x119000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +i2c@119000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <2>; + compatible = "fsl-i2c"; + reg = <0x119000 0x100>; + interrupts = <39 2 0 0>; + dfsrr; +}; + +i2c@119100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <3>; + compatible = "fsl-i2c"; + reg = <0x119100 0x100>; + interrupts = <39 2 0 0>; + dfsrr; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi new file mode 100644 index 000000000000..b9bada6a87dc --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi @@ -0,0 +1,106 @@ +/* + * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <4>; + reg = <0x40000 0x40000>; + compatible = "fsl,mpic", "chrp,open-pic"; + device_type = "open-pic"; + clock-frequency = <0x0>; +}; + +timer@41100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x41100 0x100 0x41300 4>; + interrupts = <0 0 3 0 + 1 0 3 0 + 2 0 3 0 + 3 0 3 0>; +}; + +msi0: msi@41600 { + compatible = "fsl,mpic-msi"; + reg = <0x41600 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; +}; + +msi1: msi@41800 { + compatible = "fsl,mpic-msi"; + reg = <0x41800 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe8 0 0 0 + 0xe9 0 0 0 + 0xea 0 0 0 + 0xeb 0 0 0 + 0xec 0 0 0 + 0xed 0 0 0 + 0xee 0 0 0 + 0xef 0 0 0>; +}; + +msi2: msi@41a00 { + compatible = "fsl,mpic-msi"; + reg = <0x41a00 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xf0 0 0 0 + 0xf1 0 0 0 + 0xf2 0 0 0 + 0xf3 0 0 0 + 0xf4 0 0 0 + 0xf5 0 0 0 + 0xf6 0 0 0 + 0xf7 0 0 0>; +}; + +timer@42100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x42100 0x100 0x42300 4>; + interrupts = <4 0 3 0 + 5 0 3 0 + 6 0 3 0 + 7 0 3 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi new file mode 100644 index 000000000000..ca7fec792e53 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ RIO Message Unit device tree stub [ controller @ offset 0xd3000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +rmu: rmu@d3000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,srio-rmu"; + reg = <0xd3000 0x500>; + ranges = <0x0 0xd3000 0x500>; + + message-unit@0 { + compatible = "fsl,srio-msg-unit"; + reg = <0x0 0x100>; + interrupts = < + 60 2 0 0 /* msg1_tx_irq */ + 61 2 0 0>;/* msg1_rx_irq */ + }; + message-unit@100 { + compatible = "fsl,srio-msg-unit"; + reg = <0x100 0x100>; + interrupts = < + 62 2 0 0 /* msg2_tx_irq */ + 63 2 0 0>;/* msg2_rx_irq */ + }; + doorbell-unit@400 { + compatible = "fsl,srio-dbell-unit"; + reg = <0x400 0x80>; + interrupts = < + 56 2 0 0 /* bell_outb_irq */ + 57 2 0 0>;/* bell_inb_irq */ + }; + port-write-unit@4e0 { + compatible = "fsl,srio-port-write-unit"; + reg = <0x4e0 0x20>; + interrupts = <16 2 1 11>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi new file mode 100644 index 000000000000..b642047fdecf --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi @@ -0,0 +1,39 @@ +/* + * QorIQ SATAv2 device tree stub [ controller @ offset 0x220000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sata@220000 { + compatible = "fsl,pq-sata-v2"; + reg = <0x220000 0x1000>; + interrupts = <68 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi new file mode 100644 index 000000000000..c57370259750 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi @@ -0,0 +1,39 @@ +/* + * QorIQ SATAv2 device tree stub [ controller @ offset 0x221000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sata@221000 { + compatible = "fsl,pq-sata-v2"; + reg = <0x221000 0x1000>; + interrupts = <69 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi new file mode 100644 index 000000000000..0cbbac329539 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi @@ -0,0 +1,100 @@ +/* + * QorIQ Sec/Crypto 4.0 device tree stub [ controller @ offset 0x300000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto: crypto@300000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; +}; + +sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi new file mode 100644 index 000000000000..3308986bba0d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi @@ -0,0 +1,109 @@ +/* + * QorIQ Sec/Crypto 4.1 device tree stub [ controller @ offset 0x300000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto: crypto@300000 { + compatible = "fsl,sec-v4.1", "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.1-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.1-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.1-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.1-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.1-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.1-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.1-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.1-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.1-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; +}; + +sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi new file mode 100644 index 000000000000..7990e0d3d6f2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi @@ -0,0 +1,109 @@ +/* + * QorIQ Sec/Crypto 4.2 device tree stub [ controller @ offset 0x300000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto: crypto@300000 { + compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.2-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; +}; + +sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi new file mode 100644 index 000000000000..4dd6f84c239c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ USB DR device tree stub [ controller @ offset 0x211000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +usb@211000 { + compatible = "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + reg = <0x211000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <45 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi new file mode 100644 index 000000000000..f053835aa1c7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ USB Host device tree stub [ controller @ offset 0x210000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +usb@210000 { + compatible = "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + reg = <0x210000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts index 2266bbb303d0..38dcb96c8e26 100644 --- a/arch/powerpc/boot/dts/gef_ppc9a.dts +++ b/arch/powerpc/boot/dts/gef_ppc9a.dts @@ -339,7 +339,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <0x2a 0x2>; @@ -349,7 +349,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <0x1c 0x2>; diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts index 429e87d9acef..5ab8932d09b7 100644 --- a/arch/powerpc/boot/dts/gef_sbc310.dts +++ b/arch/powerpc/boot/dts/gef_sbc310.dts @@ -337,7 +337,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <0x2a 0x2>; @@ -347,7 +347,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <0x1c 0x2>; diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index d81201ac2cad..d5341f5741aa 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -337,7 +337,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <0x2a 0x2>; @@ -347,7 +347,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <0x1c 0x2>; diff --git a/arch/powerpc/boot/dts/klondike.dts b/arch/powerpc/boot/dts/klondike.dts new file mode 100644 index 000000000000..8c9429033618 --- /dev/null +++ b/arch/powerpc/boot/dts/klondike.dts @@ -0,0 +1,227 @@ +/* + * Device Tree for Klondike (APM8018X) board. + * + * Copyright (c) 2010, Applied Micro Circuits Corporation + * Author: Tanmay Inamdar <tinamdar@apm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "apm,klondike"; + compatible = "apm,klondike"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,apm8018x"; + reg = <0x00000000>; + clock-frequency = <300000000>; /* Filled in by U-Boot */ + timebase-frequency = <300000000>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; /* 16 kB */ + d-cache-size = <16384>; /* 16 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x010>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x010>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x010>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x0a 0x4 0x0b 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x010>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + plb { + compatible = "ibm,plb4"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-apm8018x"; + dcr-reg = <0x010 0x002>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <16>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC1>; + interrupts = </*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x1 0x4 + /*TXDE*/ 0x2 0x4 + /*RXDE*/ 0x3 0x4>; + }; + + POB0: opb { + compatible = "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x20000000 0x20000000 0x30000000 + 0x50000000 0x50000000 0x10000000 + 0x60000000 0x60000000 0x10000000 + 0xFE000000 0xFE000000 0x00010000>; + dcr-reg = <0x100 0x020>; + clock-frequency = <300000000>; /* Filled in by U-Boot */ + + RGMII0: emac-rgmii@400a2000 { + compatible = "ibm,rgmii"; + reg = <0x400a2000 0x00000010>; + has-mdio; + }; + + TAH0: emac-tah@400a3000 { + compatible = "ibm,tah"; + reg = <0x400a3000 0x100>; + }; + + TAH1: emac-tah@400a4000 { + compatible = "ibm,tah"; + reg = <0x400a4000 0x100>; + }; + + EMAC0: ethernet@400a0000 { + compatible = "ibm,emac4", "ibm-emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4>; + reg = <0x400a0000 0x00000100>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0x0>; + mal-rx-channel = <0x0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-address = <0x2>; + turbo = "no"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@400a1000 { + compatible = "ibm,emac4", "ibm-emac4sync"; + status = "disabled"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4>; + reg = <0x400a1000 0x00000100>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-address = <0x3>; + turbo = "no"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@50001000"; + }; +}; diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts index d16bae1230f7..983aee185793 100644 --- a/arch/powerpc/boot/dts/kmeter1.dts +++ b/arch/powerpc/boot/dts/kmeter1.dts @@ -80,7 +80,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <264000000>; interrupts = <9 0x8>; diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts index 8d725d10882f..0a4545159e80 100644 --- a/arch/powerpc/boot/dts/kuroboxHD.dts +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -84,7 +84,7 @@ XXXX add flash parts, rtc, ?? serial0: serial@80004500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x80004500 0x8>; clock-frequency = <97553800>; current-speed = <9600>; @@ -95,7 +95,7 @@ XXXX add flash parts, rtc, ?? serial1: serial@80004600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x80004600 0x8>; clock-frequency = <97553800>; current-speed = <57600>; diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts index b13a11eb81b0..0e758b347cdb 100644 --- a/arch/powerpc/boot/dts/kuroboxHG.dts +++ b/arch/powerpc/boot/dts/kuroboxHG.dts @@ -84,7 +84,7 @@ XXXX add flash parts, rtc, ?? serial0: serial@80004500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x80004500 0x8>; clock-frequency = <130041000>; current-speed = <9600>; @@ -95,7 +95,7 @@ XXXX add flash parts, rtc, ?? serial1: serial@80004600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x80004600 0x8>; clock-frequency = <130041000>; current-speed = <57600>; diff --git a/arch/powerpc/boot/dts/mpc8308_p1m.dts b/arch/powerpc/boot/dts/mpc8308_p1m.dts index 697b3f6b78bf..22b0832b6c31 100644 --- a/arch/powerpc/boot/dts/mpc8308_p1m.dts +++ b/arch/powerpc/boot/dts/mpc8308_p1m.dts @@ -233,7 +233,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <133333333>; interrupts = <9 0x8>; @@ -243,7 +243,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <133333333>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts index a0bd1881081e..f66d10d95a8d 100644 --- a/arch/powerpc/boot/dts/mpc8308rdb.dts +++ b/arch/powerpc/boot/dts/mpc8308rdb.dts @@ -208,7 +208,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <133333333>; interrupts = <9 0x8>; @@ -218,7 +218,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <133333333>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index ac1eb320c7b4..1c836c6c5be6 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -261,7 +261,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -271,7 +271,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index 4dd08c322979..811848e93aef 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -265,7 +265,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <133333333>; interrupts = <9 0x8>; @@ -275,7 +275,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <133333333>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 05ad8c98e527..da9c72ddc343 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -105,7 +105,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -115,7 +115,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index f4fadb23ad6f..ff7b15b340a3 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -83,7 +83,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -93,7 +93,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 505dc842d808..2608679d0d4a 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -283,7 +283,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; // from bootloader interrupts = <9 0x8>; @@ -293,7 +293,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; // from bootloader interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index eb732115f016..6cd044d8fb89 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -189,7 +189,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; // from bootloader interrupts = <9 0x8>; @@ -199,7 +199,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; // from bootloader interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index 230febb9b72f..4552864082c2 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -242,7 +242,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -252,7 +252,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 45cfa1c50a2a..c0e450a551bf 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -136,7 +136,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <264000000>; interrupts = <9 0x8>; @@ -146,7 +146,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <264000000>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts index bdf4459677b1..b6e9aec1d860 100644 --- a/arch/powerpc/boot/dts/mpc836x_rdk.dts +++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts @@ -102,7 +102,7 @@ serial0: serial@4500 { device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; interrupts = <9 8>; interrupt-parent = <&ipic>; @@ -112,7 +112,7 @@ serial1: serial@4600 { device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; interrupts = <10 8>; interrupt-parent = <&ipic>; diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index 855782c5e5ec..cfccef57cd1d 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -276,7 +276,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -286,7 +286,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index dbc1b988b29d..353deff1b7f6 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -321,7 +321,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -331,7 +331,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts index 9ea783056969..ef4a305a0d0c 100644 --- a/arch/powerpc/boot/dts/mpc8377_wlan.dts +++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts @@ -304,7 +304,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -314,7 +314,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index f70cf6000839..538fcb927337 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -315,7 +315,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -325,7 +325,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index 3447eb9f6e88..32333a908f3d 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -321,7 +321,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -331,7 +331,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index 645ec51cc6e1..5387092fdfb4 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -313,7 +313,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -323,7 +323,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index 15560c619b04..46224c2430ff 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -319,7 +319,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -329,7 +329,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index a75c10eed269..c15881574fdc 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -9,24 +9,11 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/mpc8536si-pre.dtsi" / { model = "fsl,mpc8536ds"; compatible = "fsl,mpc8536ds"; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - pci3 = &pci3; - }; cpus { #cpus = <1>; @@ -45,403 +32,34 @@ reg = <0 0 0 0>; // Filled by U-Boot }; - soc@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,mpc8536-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8536-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 0x2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8536-l2-cache-controller"; - reg = <0x20000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <16 0x2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - rtc@68 { - compatible = "dallas,ds3232"; - reg = <0x68>; - interrupts = <0 0x1>; - interrupt-parent = <&mpic>; - }; - }; - - spi@7000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc8536-espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2>; - interrupt-parent = <&mpic>; - fsl,espi-num-chipselects = <4>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,s25sl12801"; - reg = <0>; - spi-max-frequency = <40000000>; - partition@u-boot { - label = "u-boot"; - reg = <0x00000000 0x00100000>; - read-only; - }; - partition@kernel { - label = "kernel"; - reg = <0x00100000 0x00500000>; - read-only; - }; - partition@dtb { - label = "dtb"; - reg = <0x00600000 0x00100000>; - read-only; - }; - partition@fs { - label = "file system"; - reg = <0x00700000 0x00900000>; - }; - }; - flash@1 { - compatible = "spansion,s25sl12801"; - reg = <1>; - spi-max-frequency = <40000000>; - }; - flash@2 { - compatible = "spansion,s25sl12801"; - reg = <2>; - spi-max-frequency = <40000000>; - }; - flash@3 { - compatible = "spansion,s25sl12801"; - reg = <3>; - spi-max-frequency = <40000000>; - }; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma"; - reg = <0x21300 4>; - ranges = <0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8536-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8536-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8536-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8536-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - usb@22000 { - compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; - reg = <0x22000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; - phy_type = "ulpi"; - }; - - usb@23000 { - compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; - reg = <0x23000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&mpic>; - interrupts = <46 0x2>; - phy_type = "ulpi"; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 0x1>; - reg = <0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 0x1>; - reg = <1>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - usb@2b000 { - compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr"; - reg = <0x2b000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&mpic>; - interrupts = <60 0x2>; - dr_mode = "peripheral"; - phy_type = "ulpi"; - }; - - sdhci@2e000 { - compatible = "fsl,mpc8536-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2>; - interrupt-parent = <&mpic>; - clock-frequency = <250000000>; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 0x2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 0x2>; - interrupt-parent = <&mpic>; - }; - - crypto@30000 { - compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", - "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x9fe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - sata@18000 { - compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; - reg = <0x18000 0x1000>; - cell-index = <1>; - interrupts = <74 0x2>; - interrupt-parent = <&mpic>; - }; - - sata@19000 { - compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; - reg = <0x19000 0x1000>; - cell-index = <2>; - interrupts = <41 0x2>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,mpc8548-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - big-endian; - }; + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + }; - msi@41600 { - compatible = "fsl,mpc8536-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0 0xffe00000 0x100000>; }; pci0: pci@ffe08000 { - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; + reg = <0 0xffe08000 0 0x1000>; + ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000 + 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>; + clock-frequency = <66666666>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 J17 Slot 1 */ - 0x8800 0 0 1 &mpic 1 1 - 0x8800 0 0 2 &mpic 2 1 - 0x8800 0 0 3 &mpic 3 1 - 0x8800 0 0 4 &mpic 4 1>; - - interrupt-parent = <&mpic>; - interrupts = <24 0x2>; - bus-range = <0 0xff>; - ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000 - 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe08000 0 0x1000>; + 0x8800 0 0 1 &mpic 1 1 0 0 + 0x8800 0 0 2 &mpic 2 1 0 0 + 0x8800 0 0 3 &mpic 3 1 0 0 + 0x8800 0 0 4 &mpic 4 1 0 0>; }; pci1: pcie@ffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xffe09000 0 0x1000>; - bus-range = <0 0xff>; ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000 0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 0x2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 - >; pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x02000000 0 0x98000000 0x02000000 0 0x98000000 0 0x08000000 @@ -453,31 +71,10 @@ }; pci2: pcie@ffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xffe0a000 0 0x1000>; - bus-range = <0 0xff>; ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000 0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 0x2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 - >; pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x02000000 0 0x90000000 0x02000000 0 0x90000000 0 0x08000000 @@ -489,32 +86,10 @@ }; pci3: pcie@ffe0b000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xffe0b000 0 0x1000>; - bus-range = <0 0xff>; ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000 0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <27 0x2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 8 1 - 0000 0 0 2 &mpic 9 1 - 0000 0 0 3 &mpic 10 1 - 0000 0 0 4 &mpic 11 1 - >; - pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x02000000 0 0xa0000000 0x02000000 0 0xa0000000 0 0x20000000 @@ -525,3 +100,6 @@ }; }; }; + +/include/ "fsl/mpc8536si-post.dtsi" +/include/ "mpc8536ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8536ds.dtsi b/arch/powerpc/boot/dts/mpc8536ds.dtsi new file mode 100644 index 000000000000..1462e4cf49d7 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8536ds.dtsi @@ -0,0 +1,141 @@ +/* + * MPC8536DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_soc { + i2c@3100 { + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0 0x1 0 0>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + flash@1 { + compatible = "spansion,s25sl12801"; + reg = <1>; + spi-max-frequency = <40000000>; + }; + flash@2 { + compatible = "spansion,s25sl12801"; + reg = <2>; + spi-max-frequency = <40000000>; + }; + flash@3 { + compatible = "spansion,s25sl12801"; + reg = <3>; + spi-max-frequency = <40000000>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + usb@23000 { + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <10 0x1 0 0>; + reg = <0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupts = <10 0x1 0 0>; + reg = <1>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + usb@2b000 { + dr_mode = "peripheral"; + phy_type = "ulpi"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts index d95b26021e62..8f4b929b1d1d 100644 --- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts +++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts @@ -1,5 +1,5 @@ /* - * MPC8536 DS Device Tree Source + * MPC8536DS Device Tree Source (36-bit address map) * * Copyright 2008-2009 Freescale Semiconductor, Inc. * @@ -9,24 +9,11 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/mpc8536si-pre.dtsi" / { model = "fsl,mpc8536ds"; compatible = "fsl,mpc8536ds"; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - pci3 = &pci3; - }; cpus { #cpus = <1>; @@ -45,351 +32,34 @@ reg = <0 0 0 0>; // Filled by U-Boot }; - soc@fffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xf 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,mpc8536-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8536-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 0x2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8536-l2-cache-controller"; - reg = <0x20000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <16 0x2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - rtc@68 { - compatible = "dallas,ds3232"; - reg = <0x68>; - interrupts = <0 0x1>; - interrupt-parent = <&mpic>; - }; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma"; - reg = <0x21300 4>; - ranges = <0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8536-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8536-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8536-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8536-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - usb@22000 { - compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; - reg = <0x22000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; - phy_type = "ulpi"; - }; - - usb@23000 { - compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; - reg = <0x23000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&mpic>; - interrupts = <46 0x2>; - phy_type = "ulpi"; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 0x1>; - reg = <0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 0x1>; - reg = <1>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - usb@2b000 { - compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr"; - reg = <0x2b000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&mpic>; - interrupts = <60 0x2>; - dr_mode = "peripheral"; - phy_type = "ulpi"; - }; - - sdhci@2e000 { - compatible = "fsl,mpc8536-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2>; - interrupt-parent = <&mpic>; - clock-frequency = <250000000>; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 0x2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 0x2>; - interrupt-parent = <&mpic>; - }; - - crypto@30000 { - compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", - "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x9fe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - sata@18000 { - compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; - reg = <0x18000 0x1000>; - cell-index = <1>; - interrupts = <74 0x2>; - interrupt-parent = <&mpic>; - }; - - sata@19000 { - compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; - reg = <0x19000 0x1000>; - cell-index = <2>; - interrupts = <41 0x2>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,mpc8548-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - big-endian; - }; + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + }; - msi@41600 { - compatible = "fsl,mpc8536-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; + board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; }; - pci0: pci@fffe08000 { - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; + pci0: pci@ffe08000 { + reg = <0xf 0xffe08000 0 0x1000>; + ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>; + clock-frequency = <66666666>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 J17 Slot 1 */ - 0x8800 0 0 1 &mpic 1 1 - 0x8800 0 0 2 &mpic 2 1 - 0x8800 0 0 3 &mpic 3 1 - 0x8800 0 0 4 &mpic 4 1>; - - interrupt-parent = <&mpic>; - interrupts = <24 0x2>; - bus-range = <0 0xff>; - ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000 - 0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xf 0xffe08000 0 0x1000>; + 0x8800 0 0 1 &mpic 1 1 0 0 + 0x8800 0 0 2 &mpic 2 1 0 0 + 0x8800 0 0 3 &mpic 3 1 0 0 + 0x8800 0 0 4 &mpic 4 1 0 0>; }; - pci1: pcie@fffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; + pci1: pcie@ffe09000 { reg = <0xf 0xffe09000 0 0x1000>; - bus-range = <0 0xff>; ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000 0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 0x2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 - >; pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x02000000 0 0xf8000000 0x02000000 0 0xf8000000 0 0x08000000 @@ -401,31 +71,10 @@ }; pci2: pcie@fffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xffe0a000 0 0x1000>; - bus-range = <0 0xff>; ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000 0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 0x2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 - >; pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x02000000 0 0xf8000000 0x02000000 0 0xf8000000 0 0x08000000 @@ -437,32 +86,10 @@ }; pci3: pcie@fffe0b000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xffe0b000 0 0x1000>; - bus-range = <0 0xff>; ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <27 0x2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 8 1 - 0000 0 0 2 &mpic 9 1 - 0000 0 0 3 &mpic 10 1 - 0000 0 0 4 &mpic 11 1 - >; - pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x20000000 @@ -473,3 +100,6 @@ }; }; }; + +/include/ "fsl/mpc8536si-post.dtsi" +/include/ "mpc8536ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 8d1bf0fd9268..f99fb110c97f 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -243,7 +243,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; @@ -253,7 +253,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index 87ff96549fac..0f5e93912799 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -209,7 +209,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; @@ -219,7 +219,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index d793968743c9..e934987e882b 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -9,339 +9,52 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/mpc8544si-pre.dtsi" + / { model = "MPC8544DS"; compatible = "MPC8544DS", "MPC85xxDS"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - pci3 = &pci3; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8544@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; - }; memory { device_type = "memory"; - reg = <0x0 0x0>; // Filled by U-Boot + reg = <0 0 0 0>; // Filled by U-Boot }; - soc8544@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - - ranges = <0x0 0xe0000000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - ecm@1000 { - compatible = "fsl,mpc8544-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8544-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8544-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2, 256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8544-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8544-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8544-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8544-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8544-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy0>; - tbi-handle = <&tbi0>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy1>; - tbi-handle = <&tbi1>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,mpc8548-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - crypto@30000 { - compatible = "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xfe>; - fsl,descriptor-types-mask = <0x12b0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; + lbc: localbus@e0005000 { + reg = <0 0xe0005000 0 0x1000>; + }; - msi@41600 { - compatible = "fsl,mpc8544-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; + board_soc: soc: soc8544@e0000000 { + ranges = <0x0 0x0 0xe0000000 0x100000>; }; pci0: pci@e0008000 { - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; + reg = <0 0xe0008000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe1000000 0x0 0x10000>; + clock-frequency = <66666666>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 J17 Slot 1 */ - 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 /* IDSEL 0x12 J16 Slot 2 */ - 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <24 2>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe1000000 0x0 0x10000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008000 0x1000>; + 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0>; }; pci1: pcie@e0009000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0009000 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; + reg = <0x0 0xe0009000 0x0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe1010000 0x0 0x10000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 @@ -353,31 +66,10 @@ }; pci2: pcie@e000a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe000a000 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 - 0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; + reg = <0x0 0xe000a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe1020000 0x0 0x10000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x10000000 @@ -388,44 +80,11 @@ }; }; - pci3: pcie@e000b000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe000b000 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xb0000000 0xb0000000 0x0 0x100000 - 0x1000000 0x0 0x0 0xb0100000 0x0 0x100000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <27 2>; - interrupt-map-mask = <0xff00 0x0 0x0 0x1>; - interrupt-map = < - // IDSEL 0x1c USB - 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 - 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 - 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 - 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 - - // IDSEL 0x1d Audio - 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 - - // IDSEL 0x1e Legacy - 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 - 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 - - // IDSEL 0x1f IDE/SATA - 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 - 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 - >; - + board_pci3: pci3: pcie@e000b000 { + reg = <0x0 0xe000b000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xb0000000 0 0xb0000000 0x0 0x100000 + 0x1000000 0x0 0x00000000 0 0xb0100000 0x0 0x100000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xb0000000 0x2000000 0x0 0xb0000000 0x0 0x100000 @@ -433,70 +92,14 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 0x0 0x100000>; - - uli1575@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x2000000 0x0 0xb0000000 - 0x2000000 0x0 0xb0000000 - 0x0 0x100000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - isa@1e { - device_type = "isa"; - #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <0xf000 0x0 0x0 0x0 0x0>; - ranges = <0x1 0x0 - 0x1000000 0x0 0x0 - 0x1000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - reg = <0x1 0x20 0x2 - 0x1 0xa0 0x2 - 0x1 0x4d0 0x2>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = <&mpic>; - }; - - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <0x1 0x60 0x1 0x1 0x64 0x1>; - interrupts = <1 3 12 3>; - interrupt-parent = <&i8259>; - - keyboard@0 { - reg = <0x0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <0x1>; - compatible = "pnpPNP,f03"; - }; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <0x1 0x70 0x2>; - }; - - gpio@400 { - reg = <0x1 0x400 0x80>; - }; - }; - }; }; }; }; + +/* + * mpc8544ds.dtsi must be last to ensure board_pci3 overrides pci3 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "fsl/mpc8544si-post.dtsi" +/include/ "mpc8544ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8544ds.dtsi b/arch/powerpc/boot/dts/mpc8544ds.dtsi new file mode 100644 index 000000000000..270f64b90f4e --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8544ds.dtsi @@ -0,0 +1,161 @@ +/* + * MPC8544DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_soc { + enet0: ethernet@24000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <10 1 0 0>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupts = <10 1 0 0>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; +}; + +&board_pci3 { + pcie@0 { + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + // IDSEL 0x1c USB + 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 + 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 + 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 + 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 + + // IDSEL 0x1d Audio + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 + + // IDSEL 0x1e Legacy + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 + >; + + + uli1575@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0xb0000000 + 0x2000000 0x0 0xb0000000 + 0x0 0x100000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <9 2 0 0>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0x0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <0x1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + + gpio@400 { + reg = <0x1 0x400 0x80>; + }; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index a17a5572fb73..07b8dae0f46e 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -9,13 +9,11 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/mpc8548si-pre.dtsi" / { model = "MPC8548CDS"; compatible = "MPC8548CDS", "MPC85xxCDS"; - #address-cells = <1>; - #size-cells = <1>; aliases { ethernet0 = &enet0; @@ -29,76 +27,19 @@ pci2 = &pci2; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8548@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; // 33 MHz, from uboot - bus-frequency = <0>; // 166 MHz - clock-frequency = <0>; // 825 MHz, from uboot - next-level-cache = <&L2>; - }; - }; - memory { device_type = "memory"; - reg = <0x0 0x8000000>; // 128M at 0x0 + reg = <0 0 0x0 0x8000000>; // 128M at 0x0 }; - soc8548@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xe0000000 0x100000>; - bus-frequency = <0>; - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - ecm@1000 { - compatible = "fsl,mpc8548-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8548-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; + lbc: localbus@e0005000 { + reg = <0 0xe0005000 0 0x1000>; + }; - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8548-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2, 512K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; + soc: soc8548@e0000000 { + ranges = <0 0x0 0xe0000000 0x100000>; i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; @@ -116,351 +57,178 @@ }; i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; + }; - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <5 1 0 0>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupts = <5 1 0 0>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupts = <5 1 0 0>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupts = <5 1 0 0>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; + }; - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi2>; phy-handle = <&phy2>; + }; - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; enet3: ethernet@27000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <3>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x27000 0x1000>; - ranges = <0x0 0x27000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <37 2 38 2 39 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi3>; phy-handle = <&phy3>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <42 2>; - interrupt-parent = <&mpic>; }; - global-utilities@e0000 { //global utilities reg - compatible = "fsl,mpc8548-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - crypto@30000 { - compatible = "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xfe>; - fsl,descriptor-types-mask = <0x12b0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; }; pci0: pci@e0008000 { + reg = <0 0xe0008000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x4 (PCIX Slot 2) */ - 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0x5 (PCIX Slot 3) */ - 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 - 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 - 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 - 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 + 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 + 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 /* IDSEL 0x6 (PCIX Slot 4) */ - 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 - 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 /* IDSEL 0x8 (PCIX Slot 5) */ - 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0xC (Tsi310 bridge) */ - 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0x14 (Slot 2) */ - 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0x15 (Slot 3) */ - 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 - 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 - 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 - 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 + 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 /* IDSEL 0x16 (Slot 4) */ - 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 - 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 - 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 - 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 + 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 /* IDSEL 0x18 (Slot 5) */ - 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ - 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <24 2>; - bus-range = <0 0>; - ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008000 0x1000>; - compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; - device_type = "pci"; + 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; pci_bridge@1c { interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x00 (PrPMC Site) */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0x04 (VIA chip) */ - 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0x05 (8139) */ - 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 /* IDSEL 0x06 (Slot 6) */ - 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 - 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 /* IDESL 0x07 (Slot 7) */ - 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 - 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>; + 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0 + 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>; reg = <0xe000 0x0 0x0 0x0 0x0>; #interrupt-cells = <1>; @@ -492,7 +260,7 @@ #address-cells = <0>; #interrupt-cells = <2>; compatible = "chrp,iic"; - interrupts = <0 1>; + interrupts = <0 1 0 0>; interrupt-parent = <&mpic>; }; @@ -505,56 +273,25 @@ }; pci1: pci@e0009000 { + reg = <0 0xe0009000 0 0x1000>; + ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>; + clock-frequency = <66666666>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x15 */ - 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 - 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <25 2>; - bus-range = <0 0>; - ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000 - 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0009000 0x1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; }; pci2: pcie@e000a000 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x0 (PEX) */ - 00000 0x0 0x0 0x1 &mpic 0x0 0x1 - 00000 0x0 0x0 0x2 &mpic 0x1 0x1 - 00000 0x0 0x0 0x3 &mpic 0x2 0x1 - 00000 0x0 0x0 0x4 &mpic 0x3 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <26 2>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; - clock-frequency = <33333333>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe000a000 0x1000>; - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; + reg = <0 0xe000a000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000 @@ -565,3 +302,5 @@ }; }; }; + +/include/ "fsl/mpc8548si-post.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 5c5614f9eb17..fe10438613d6 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -209,7 +209,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; @@ -219,7 +219,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 647daf8e7291..09598bb5d443 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -9,60 +9,25 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/mpc8568si-pre.dtsi" / { model = "MPC8568EMDS"; compatible = "MPC8568EMDS", "MPC85xxMDS"; - #address-cells = <1>; - #size-cells = <1>; aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - ethernet3 = &enet3; - serial0 = &serial0; - serial1 = &serial1; pci0 = &pci0; pci1 = &pci1; - rapidio0 = &rio0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8568@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - sleep = <&pmc 0x00008000 // core - &pmc 0x00004000>; // timebase - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; + rapidio0 = &rio; }; memory { device_type = "memory"; - reg = <0x0 0x10000000>; + reg = <0x0 0x0 0x0 0x0>; }; - localbus@e0005000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", - "simple-bus"; - reg = <0xe0005000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <19 2>; - + lbc: localbus@e0005000 { + reg = <0x0 0xe0005000 0x0 0x1000>; ranges = <0x0 0x0 0xfe000000 0x02000000 0x1 0x0 0xf8000000 0x00008000 0x2 0x0 0xf0000000 0x04000000 @@ -104,288 +69,65 @@ }; }; - soc8568@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xe0000000 0x100000>; - bus-frequency = <0>; - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - ecm@1000 { - compatible = "fsl,mpc8568-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8568-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8568-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2, 512K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; + soc: soc8568@e0000000 { + ranges = <0x0 0x0 0xe0000000 0x100000>; i2c-sleep-nexus { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - sleep = <&pmc 0x00000004>; - ranges; - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - rtc@68 { compatible = "dallas,ds1374"; reg = <0x68>; - interrupts = <3 1>; - interrupt-parent = <&mpic>; + interrupts = <3 1 0 0>; }; }; + }; - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; }; - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8568-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - sleep = <&pmc 0x00000400>; - - dma-channel@0 { - compatible = "fsl,mpc8568-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; + mdio@24520 { + phy0: ethernet-phy@7 { + interrupts = <1 1 0 0>; + reg = <0x7>; + device_type = "ethernet-phy"; }; - dma-channel@80 { - compatible = "fsl,mpc8568-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + device_type = "ethernet-phy"; }; - dma-channel@100 { - compatible = "fsl,mpc8568-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; + phy2: ethernet-phy@2 { + interrupts = <1 1 0 0>; + reg = <0x2>; + device_type = "ethernet-phy"; }; - dma-channel@180 { - compatible = "fsl,mpc8568-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; + phy3: ethernet-phy@3 { + interrupts = <2 1 0 0>; + reg = <0x3>; + device_type = "ethernet-phy"; }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy2>; - sleep = <&pmc 0x00000080>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@7 { - interrupt-parent = <&mpic>; - interrupts = <1 1>; - reg = <0x7>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <2 1>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <1 1>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <2 1>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy3>; sleep = <&pmc 0x00000040>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; }; - duart-sleep-nexus { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - sleep = <&pmc 0x00000002>; - ranges; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; - global-utilities@e0000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts"; - reg = <0xe0000 0x1000>; - ranges = <0 0xe0000 0x1000>; - fsl,has-rstcr; - - pmc: power@70 { - compatible = "fsl,mpc8568-pmc", - "fsl,mpc8548-pmc"; - reg = <0x70 0x20>; - }; - }; - - crypto@30000 { - compatible = "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xfe>; - fsl,descriptor-types-mask = <0x12b0ebf>; - sleep = <&pmc 0x01000000>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,mpc8568-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - par_io@e0100 { - reg = <0xe0100 0x100>; - device_type = "par_io"; num-ports = <7>; pio1: ucc_pin@01 { @@ -448,57 +190,21 @@ }; }; - qe@e0080000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "qe"; - compatible = "fsl,qe"; - ranges = <0x0 0xe0080000 0x40000>; - reg = <0xe0080000 0x480>; - sleep = <&pmc 0x00000800>; - brg-frequency = <0>; - bus-frequency = <396000000>; - fsl,qe-num-riscs = <2>; - fsl,qe-num-snums = <28>; - - muram@10000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,qe-muram", "fsl,cpm-muram"; - ranges = <0x0 0x10000 0x10000>; - - data-only@0 { - compatible = "fsl,qe-muram-data", - "fsl,cpm-muram-data"; - reg = <0x0 0x10000>; - }; - }; + qe: qe@e0080000 { + ranges = <0x0 0x0 0xe0080000 0x40000>; + reg = <0x0 0xe0080000 0x0 0x480>; spi@4c0 { - cell-index = <0>; - compatible = "fsl,spi"; - reg = <0x4c0 0x40>; - interrupts = <2>; - interrupt-parent = <&qeic>; mode = "cpu"; }; spi@500 { - cell-index = <1>; - compatible = "fsl,spi"; - reg = <0x500 0x40>; - interrupts = <1>; - interrupt-parent = <&qeic>; mode = "cpu"; }; enet2: ucc@2000 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <1>; - reg = <0x2000 0x200>; - interrupts = <32>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "clk16"; @@ -510,10 +216,6 @@ enet3: ucc@3000 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <2>; - reg = <0x3000 0x200>; - interrupts = <33>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "clk16"; @@ -532,102 +234,57 @@ * gianfar's MDIO bus */ qe_phy0: ethernet-phy@07 { interrupt-parent = <&mpic>; - interrupts = <1 1>; + interrupts = <1 1 0 0>; reg = <0x7>; device_type = "ethernet-phy"; }; qe_phy1: ethernet-phy@01 { interrupt-parent = <&mpic>; - interrupts = <2 1>; + interrupts = <2 1 0 0>; reg = <0x1>; device_type = "ethernet-phy"; }; qe_phy2: ethernet-phy@02 { interrupt-parent = <&mpic>; - interrupts = <1 1>; + interrupts = <1 1 0 0>; reg = <0x2>; device_type = "ethernet-phy"; }; qe_phy3: ethernet-phy@03 { interrupt-parent = <&mpic>; - interrupts = <2 1>; + interrupts = <2 1 0 0>; reg = <0x3>; device_type = "ethernet-phy"; }; }; - - qeic: interrupt-controller@80 { - interrupt-controller; - compatible = "fsl,qe-ic"; - #address-cells = <0>; - #interrupt-cells = <1>; - reg = <0x80 0x80>; - big-endian; - interrupts = <46 2 46 2>; //high:30 low:30 - interrupt-parent = <&mpic>; - }; - }; pci0: pci@e0008000 { + reg = <0x0 0xe0008000 0x0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x12 AD18 */ - 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 - 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 - 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 - 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 + 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0 + 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0 + 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0 + 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0 /* IDSEL 0x13 AD19 */ - 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 - 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 - 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <24 2>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>; - sleep = <&pmc 0x80000000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008000 0x1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; + 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0 + 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0 + 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>; }; /* PCI Express */ pci1: pcie@e000a000 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x0 (PEX) */ - 00000 0x0 0x0 0x1 &mpic 0x0 0x1 - 00000 0x0 0x0 0x2 &mpic 0x1 0x1 - 00000 0x0 0x0 0x3 &mpic 0x2 0x1 - 00000 0x0 0x0 0x4 &mpic 0x3 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <26 2>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 - 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>; - sleep = <&pmc 0x20000000>; - clock-frequency = <33333333>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe000a000 0x1000>; - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; + ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>; + reg = <0x0 0xe000a000 0x0 0x1000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x10000000 @@ -638,22 +295,11 @@ }; }; - rio0: rapidio@e00c00000 { - #address-cells = <2>; - #size-cells = <2>; - compatible = "fsl,mpc8568-rapidio", "fsl,rapidio-delta"; - reg = <0xe00c0000 0x20000>; - ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>; - interrupts = <48 2 /* error */ - 49 2 /* bell_outb */ - 50 2 /* bell_inb */ - 53 2 /* msg1_tx */ - 54 2 /* msg1_rx */ - 55 2 /* msg2_tx */ - 56 2 /* msg2_rx */>; - interrupt-parent = <&mpic>; - sleep = <&pmc 0x00080000 /* controller */ - &pmc 0x00040000>; /* message unit */ + rio: rapidio@e00c00000 { + reg = <0x0 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; + }; }; leds { @@ -672,3 +318,5 @@ }; }; }; + +/include/ "fsl/mpc8568si-post.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index 8b72eaff5b03..7e283c891b7f 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -9,66 +9,36 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/mpc8569si-pre.dtsi" / { model = "MPC8569EMDS"; compatible = "fsl,MPC8569EMDS"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; aliases { - serial0 = &serial0; - serial1 = &serial1; - ethernet0 = &enet0; - ethernet1 = &enet1; ethernet2 = &enet2; ethernet3 = &enet3; ethernet5 = &enet5; ethernet7 = &enet7; - pci1 = &pci1; - rapidio0 = &rio0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8569@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - sleep = <&pmc 0x00008000 // core - &pmc 0x00004000>; // timebase - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; + rapidio0 = &rio; }; memory { device_type = "memory"; }; - localbus@e0005000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus"; - reg = <0xe0005000 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; - sleep = <&pmc 0x08000000>; - - ranges = <0x0 0x0 0xfe000000 0x02000000 - 0x1 0x0 0xf8000000 0x00008000 - 0x2 0x0 0xf0000000 0x04000000 - 0x3 0x0 0xfc000000 0x00008000 - 0x4 0x0 0xf8008000 0x00008000 - 0x5 0x0 0xf8010000 0x00008000>; + lbc: localbus@e0005000 { + reg = <0x0 0xe0005000 0x0 0x1000>; + + ranges = <0x0 0x0 0x0 0xfe000000 0x02000000 + 0x1 0x0 0x0 0xf8000000 0x00008000 + 0x2 0x0 0x0 0xf0000000 0x04000000 + 0x3 0x0 0x0 0xfc000000 0x00008000 + 0x4 0x0 0x0 0xf8008000 0x00008000 + 0x5 0x0 0x0 0xf8010000 0x00008000>; nor@0,0 { #address-cells = <1>; @@ -133,220 +103,25 @@ }; }; - soc@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,mpc8569-immr", "simple-bus"; - ranges = <0x0 0xe0000000 0x100000>; - bus-frequency = <0>; - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - ecm@1000 { - compatible = "fsl,mpc8569-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8569-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; + soc: soc@e0000000 { + ranges = <0x0 0x0 0xe0000000 0x100000>; i2c-sleep-nexus { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - sleep = <&pmc 0x00000004>; - ranges; - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - rtc@68 { compatible = "dallas,ds1374"; reg = <0x68>; - interrupts = <3 1>; - interrupt-parent = <&mpic>; + interrupts = <3 1 0 0>; }; }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - }; - - duart-sleep-nexus { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - sleep = <&pmc 0x00000002>; - ranges; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8569-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2, 512K - interrupt-parent = <&mpic>; - interrupts = <16 2>; }; - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8569-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8569-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8569-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8569-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8569-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - sdhci@2e000 { - compatible = "fsl,mpc8569-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x8>; - interrupt-parent = <&mpic>; - sleep = <&pmc 0x00200000>; - /* Filled in by U-Boot */ - clock-frequency = <0>; + sdhc@2e000 { status = "disabled"; sdhci,1-bit-only; }; - crypto@30000 { - compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", - "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xbfe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - sleep = <&pmc 0x01000000>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,mpc8568-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts"; - reg = <0xe0000 0x1000>; - ranges = <0 0xe0000 0x1000>; - fsl,has-rstcr; - - pmc: power@70 { - compatible = "fsl,mpc8569-pmc", - "fsl,mpc8548-pmc"; - reg = <0x70 0x20>; - }; - }; - par_io@e0100 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xe0100 0x100>; - ranges = <0x0 0xe0100 0x100>; - device_type = "par_io"; num-ports = <7>; qe_pio_e: gpio-controller@80 { @@ -447,47 +222,11 @@ }; }; - qe@e0080000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "qe"; - compatible = "fsl,qe"; - ranges = <0x0 0xe0080000 0x40000>; - reg = <0xe0080000 0x480>; - sleep = <&pmc 0x00000800>; - brg-frequency = <0>; - bus-frequency = <0>; - fsl,qe-num-riscs = <4>; - fsl,qe-num-snums = <46>; - - qeic: interrupt-controller@80 { - interrupt-controller; - compatible = "fsl,qe-ic"; - #address-cells = <0>; - #interrupt-cells = <1>; - reg = <0x80 0x80>; - interrupts = <46 2 46 2>; //high:30 low:30 - interrupt-parent = <&mpic>; - }; - - timer@440 { - compatible = "fsl,mpc8569-qe-gtm", - "fsl,qe-gtm", "fsl,gtm"; - reg = <0x440 0x40>; - interrupts = <12 13 14 15>; - interrupt-parent = <&qeic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; + qe: qe@e0080000 { + ranges = <0x0 0x0 0xe0080000 0x40000>; + reg = <0x0 0xe0080000 0x0 0x480>; spi@4c0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc8569-qe-spi", "fsl,spi"; - reg = <0x4c0 0x40>; - cell-index = <0>; - interrupts = <2>; - interrupt-parent = <&qeic>; gpios = <&qe_pio_e 30 0>; mode = "cpu-qe"; @@ -499,20 +238,10 @@ }; spi@500 { - cell-index = <1>; - compatible = "fsl,spi"; - reg = <0x500 0x40>; - interrupts = <1>; - interrupt-parent = <&qeic>; mode = "cpu"; }; usb@6c0 { - compatible = "fsl,mpc8569-qe-usb", - "fsl,mpc8323-qe-usb"; - reg = <0x6c0 0x40 0x8b00 0x100>; - interrupts = <11>; - interrupt-parent = <&qeic>; fsl,fullspeed-clock = "clk5"; fsl,lowspeed-clock = "brg10"; gpios = <&qe_pio_f 3 0 /* USBOE */ @@ -527,10 +256,6 @@ enet0: ucc@2000 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <1>; - reg = <0x2000 0x200>; - interrupts = <32>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "clk12"; @@ -548,35 +273,33 @@ qe_phy0: ethernet-phy@07 { interrupt-parent = <&mpic>; - interrupts = <1 1>; + interrupts = <1 1 0 0>; reg = <0x7>; device_type = "ethernet-phy"; }; qe_phy1: ethernet-phy@01 { interrupt-parent = <&mpic>; - interrupts = <2 1>; + interrupts = <2 1 0 0>; reg = <0x1>; device_type = "ethernet-phy"; }; qe_phy2: ethernet-phy@02 { interrupt-parent = <&mpic>; - interrupts = <3 1>; + interrupts = <3 1 0 0>; reg = <0x2>; device_type = "ethernet-phy"; }; qe_phy3: ethernet-phy@03 { interrupt-parent = <&mpic>; - interrupts = <4 1>; + interrupts = <4 1 0 0>; reg = <0x3>; device_type = "ethernet-phy"; }; qe_phy5: ethernet-phy@04 { - interrupt-parent = <&mpic>; reg = <0x04>; device_type = "ethernet-phy"; }; qe_phy7: ethernet-phy@06 { - interrupt-parent = <&mpic>; reg = <0x6>; device_type = "ethernet-phy"; }; @@ -610,10 +333,6 @@ enet2: ucc@2200 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <3>; - reg = <0x2200 0x200>; - interrupts = <34>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "clk12"; @@ -637,10 +356,6 @@ enet1: ucc@3000 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <2>; - reg = <0x3000 0x200>; - interrupts = <33>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "clk17"; @@ -664,10 +379,6 @@ enet3: ucc@3200 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <4>; - reg = <0x3200 0x200>; - interrupts = <35>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "clk17"; @@ -691,10 +402,6 @@ enet5: ucc@3400 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <6>; - reg = <0x3400 0x200>; - interrupts = <41>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "none"; @@ -706,10 +413,6 @@ enet7: ucc@3600 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <8>; - reg = <0x3600 0x200>; - interrupts = <43>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "none"; @@ -717,50 +420,14 @@ phy-handle = <&qe_phy7>; phy-connection-type = "sgmii"; }; - - muram@10000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,qe-muram", "fsl,cpm-muram"; - ranges = <0x0 0x10000 0x20000>; - - data-only@0 { - compatible = "fsl,qe-muram-data", - "fsl,cpm-muram-data"; - reg = <0x0 0x20000>; - }; - }; - }; /* PCI Express */ pci1: pcie@e000a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe000a000 0x1000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 (PEX) */ - 00000 0x0 0x0 0x1 &mpic 0x0 0x1 - 00000 0x0 0x0 0x2 &mpic 0x1 0x1 - 00000 0x0 0x0 0x3 &mpic 0x2 0x1 - 00000 0x0 0x0 0x4 &mpic 0x3 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <26 2>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 - 0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>; - sleep = <&pmc 0x20000000>; - clock-frequency = <33333333>; + reg = <0x0 0xe000a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x00800000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x10000000 @@ -771,20 +438,15 @@ }; }; - rio0: rapidio@e00c00000 { - #address-cells = <2>; - #size-cells = <2>; - compatible = "fsl,mpc8569-rapidio", "fsl,rapidio-delta"; - reg = <0xe00c0000 0x20000>; - ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>; - interrupts = <48 2 /* error */ - 49 2 /* bell_outb */ - 50 2 /* bell_inb */ - 53 2 /* msg1_tx */ - 54 2 /* msg1_rx */ - 55 2 /* msg2_tx */ - 56 2 /* msg2_rx */>; - interrupt-parent = <&mpic>; - sleep = <&pmc 0x00080000>; + rio: rapidio@e00c00000 { + reg = <0x0 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; + }; + port2 { + status = "disabled"; + }; }; }; + +/include/ "fsl/mpc8569si-post.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index f6c04d25e916..0c9f2955deb4 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -9,67 +9,18 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/mpc8572si-pre.dtsi" + / { model = "fsl,MPC8572DS"; compatible = "fsl,MPC8572DS"; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - ethernet3 = &enet3; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8572@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; - - PowerPC,8572@1 { - device_type = "cpu"; - reg = <0x1>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; - }; memory { device_type = "memory"; }; - localbus@ffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + board_lbc: lbc: localbus@ffe05000 { reg = <0 0xffe05000 0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 0x1 0x0 0x0 0xe0000000 0x08000000 @@ -78,601 +29,17 @@ 0x4 0x0 0x0 0xffa40000 0x00040000 0x5 0x0 0x0 0xffa80000 0x00040000 0x6 0x0 0x0 0xffac0000 0x00040000>; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x8000000>; - bank-width = <2>; - device-width = <1>; - - ramdisk@0 { - reg = <0x0 0x03000000>; - read-only; - }; - - diagnostic@3000000 { - reg = <0x03000000 0x00e00000>; - read-only; - }; - - dink@3e00000 { - reg = <0x03e00000 0x00200000>; - read-only; - }; - - kernel@4000000 { - reg = <0x04000000 0x00400000>; - read-only; - }; - - jffs2@4400000 { - reg = <0x04400000 0x03b00000>; - }; - - dtb@7f00000 { - reg = <0x07f00000 0x00080000>; - read-only; - }; - - u-boot@7f80000 { - reg = <0x07f80000 0x00080000>; - read-only; - }; - }; - - nand@2,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x2 0x0 0x40000>; - - u-boot@0 { - reg = <0x0 0x02000000>; - read-only; - }; - - jffs2@2000000 { - reg = <0x02000000 0x10000000>; - }; - - ramdisk@12000000 { - reg = <0x12000000 0x08000000>; - read-only; - }; - - kernel@1a000000 { - reg = <0x1a000000 0x04000000>; - }; - - dtb@1e000000 { - reg = <0x1e000000 0x01000000>; - read-only; - }; - - empty@1f000000 { - reg = <0x1f000000 0x21000000>; - }; - }; - - nand@4,0 { - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x4 0x0 0x40000>; - }; - - nand@5,0 { - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x5 0x0 0x40000>; - }; - - nand@6,0 { - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x6 0x0 0x40000>; - }; }; - soc8572@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; + board_soc: soc: soc8572@ffe00000 { ranges = <0x0 0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,mpc8572-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8572-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - memory-controller@6000 { - compatible = "fsl,mpc8572-memory-controller"; - reg = <0x6000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8572-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x100000>; // L2, 1M - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; - reg = <0xc300 0x4>; - ranges = <0x0 0xc100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <76 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <77 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <78 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <79 2>; - }; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - ptp_clock@24E00 { - compatible = "fsl,etsec-ptp"; - reg = <0x24E00 0xB0>; - interrupts = <68 2 69 2 70 2 71 2>; - interrupt-parent = < &mpic >; - fsl,tclk-period = <5>; - fsl,tmr-prsc = <200>; - fsl,tmr-add = <0xAAAAAAAB>; - fsl,tmr-fiper1 = <0x3B9AC9FB>; - fsl,tmr-fiper2 = <0x3B9AC9FB>; - fsl,max-adj = <499999999>; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x2>; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x3>; - }; - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet3: ethernet@27000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <3>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x27000 0x1000>; - ranges = <0x0 0x27000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <37 2 38 2 39 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi3>; - phy-handle = <&phy3>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,mpc8572-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - msi@41600 { - compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - crypto@30000 { - compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", - "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x9fe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; }; - pci0: pcie@ffe08000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; + board_pci0: pci0: pcie@ffe08000 { reg = <0 0xffe08000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; - interrupt-map-mask = <0xff00 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x11 func 0 - PCI slot 1 */ - 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 1 - PCI slot 1 */ - 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 2 - PCI slot 1 */ - 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 3 - PCI slot 1 */ - 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 4 - PCI slot 1 */ - 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 5 - PCI slot 1 */ - 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 6 - PCI slot 1 */ - 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 7 - PCI slot 1 */ - 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x12 func 0 - PCI slot 2 */ - 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 1 - PCI slot 2 */ - 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 2 - PCI slot 2 */ - 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 3 - PCI slot 2 */ - 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 4 - PCI slot 2 */ - 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 5 - PCI slot 2 */ - 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 6 - PCI slot 2 */ - 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 7 - PCI slot 2 */ - 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 - - // IDSEL 0x1c USB - 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 - 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 - 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 - 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 - - // IDSEL 0x1d Audio - 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 - - // IDSEL 0x1e Legacy - 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 - 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 - - // IDSEL 0x1f IDE/SATA - 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 - 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 - - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 @@ -680,99 +47,14 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 0x0 0x10000>; - uli1575@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - isa@1e { - device_type = "isa"; - #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <0xf000 0x0 0x0 0x0 0x0>; - ranges = <0x1 0x0 0x1000000 0x0 0x0 - 0x1000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - reg = <0x1 0x20 0x2 - 0x1 0xa0 0x2 - 0x1 0x4d0 0x2>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = <&mpic>; - }; - - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <0x1 0x60 0x1 0x1 0x64 0x1>; - interrupts = <1 3 12 3>; - interrupt-parent = - <&i8259>; - - keyboard@0 { - reg = <0x0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <0x1>; - compatible = "pnpPNP,f03"; - }; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <0x1 0x70 0x2>; - }; - - gpio@400 { - reg = <0x1 0x400 0x80>; - }; - }; - }; }; - }; pci1: pcie@ffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xffe09000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000 @@ -784,31 +66,10 @@ }; pci2: pcie@ffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xffe0a000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xc0000000 0x2000000 0x0 0xc0000000 0x0 0x20000000 @@ -819,3 +80,11 @@ }; }; }; + +/* + * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "fsl/mpc8572si-post.dtsi" +/include/ "mpc8572ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8572ds.dtsi b/arch/powerpc/boot/dts/mpc8572ds.dtsi new file mode 100644 index 000000000000..c3d4fac0532a --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8572ds.dtsi @@ -0,0 +1,397 @@ +/* + * MPC8572DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + ramdisk@0 { + reg = <0x0 0x03000000>; + read-only; + }; + + diagnostic@3000000 { + reg = <0x03000000 0x00e00000>; + read-only; + }; + + dink@3e00000 { + reg = <0x03e00000 0x00200000>; + read-only; + }; + + kernel@4000000 { + reg = <0x04000000 0x00400000>; + read-only; + }; + + jffs2@4400000 { + reg = <0x04400000 0x03b00000>; + }; + + dtb@7f00000 { + reg = <0x07f00000 0x00080000>; + read-only; + }; + + u-boot@7f80000 { + reg = <0x07f80000 0x00080000>; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + u-boot@0 { + reg = <0x0 0x02000000>; + read-only; + }; + + jffs2@2000000 { + reg = <0x02000000 0x10000000>; + }; + + ramdisk@12000000 { + reg = <0x12000000 0x08000000>; + read-only; + }; + + kernel@1a000000 { + reg = <0x1a000000 0x04000000>; + }; + + dtb@1e000000 { + reg = <0x1e000000 0x01000000>; + read-only; + }; + + empty@1f000000 { + reg = <0x1f000000 0x21000000>; + }; + }; + + nand@4,0 { + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x4 0x0 0x40000>; + }; + + nand@5,0 { + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x5 0x0 0x40000>; + }; + + nand@6,0 { + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x6 0x0 0x40000>; + }; +}; + +&board_soc { + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <10 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <10 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <10 1 0 0>; + reg = <0x2>; + }; + phy3: ethernet-phy@3 { + interrupts = <10 1 0 0>; + reg = <0x3>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xAAAAAAAB>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x3B9AC9FB>; + fsl,max-adj = <499999999>; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + + }; + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@27000 { + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + }; + + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; +}; + +&board_pci0 { + pcie@0 { + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x11 func 0 - PCI slot 1 */ + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 1 - PCI slot 1 */ + 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 2 - PCI slot 1 */ + 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 3 - PCI slot 1 */ + 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 4 - PCI slot 1 */ + 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 5 - PCI slot 1 */ + 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 6 - PCI slot 1 */ + 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 7 - PCI slot 1 */ + 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x12 func 0 - PCI slot 2 */ + 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 1 - PCI slot 2 */ + 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 2 - PCI slot 2 */ + 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 3 - PCI slot 2 */ + 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 4 - PCI slot 2 */ + 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 5 - PCI slot 2 */ + 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 6 - PCI slot 2 */ + 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 7 - PCI slot 2 */ + 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + // IDSEL 0x1c USB + 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 + 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 + 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 + 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 + + // IDSEL 0x1d Audio + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 + + // IDSEL 0x1e Legacy + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 + >; + + + uli1575@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <9 2 0 0>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0x0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <0x1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + + gpio@400 { + reg = <0x1 0x400 0x80>; + }; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/mpc8572ds_36b.dts index f6365db3b97d..6c3d0b305e1b 100644 --- a/arch/powerpc/boot/dts/mpc8572ds_36b.dts +++ b/arch/powerpc/boot/dts/mpc8572ds_36b.dts @@ -1,5 +1,5 @@ /* - * MPC8572 DS Device Tree Source + * MPC8572DS Device Tree Source (36-bit address map) * * Copyright 2007-2009 Freescale Semiconductor Inc. * @@ -9,67 +9,18 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/mpc8572si-pre.dtsi" + / { model = "fsl,MPC8572DS"; compatible = "fsl,MPC8572DS"; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - ethernet3 = &enet3; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8572@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; - - PowerPC,8572@1 { - device_type = "cpu"; - reg = <0x1>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; - }; memory { device_type = "memory"; }; - localbus@fffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + board_lbc: lbc: localbus@fffe05000 { reg = <0xf 0xffe05000 0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 0x1 0x0 0xf 0xe0000000 0x08000000 @@ -78,588 +29,17 @@ 0x4 0x0 0xf 0xffa40000 0x00040000 0x5 0x0 0xf 0xffa80000 0x00040000 0x6 0x0 0xf 0xffac0000 0x00040000>; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x8000000>; - bank-width = <2>; - device-width = <1>; - - ramdisk@0 { - reg = <0x0 0x03000000>; - read-only; - }; - - diagnostic@3000000 { - reg = <0x03000000 0x00e00000>; - read-only; - }; - - dink@3e00000 { - reg = <0x03e00000 0x00200000>; - read-only; - }; - - kernel@4000000 { - reg = <0x04000000 0x00400000>; - read-only; - }; - - jffs2@4400000 { - reg = <0x04400000 0x03b00000>; - }; - - dtb@7f00000 { - reg = <0x07f00000 0x00080000>; - read-only; - }; - - u-boot@7f80000 { - reg = <0x07f80000 0x00080000>; - read-only; - }; - }; - - nand@2,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x2 0x0 0x40000>; - - u-boot@0 { - reg = <0x0 0x02000000>; - read-only; - }; - - jffs2@2000000 { - reg = <0x02000000 0x10000000>; - }; - - ramdisk@12000000 { - reg = <0x12000000 0x08000000>; - read-only; - }; - - kernel@1a000000 { - reg = <0x1a000000 0x04000000>; - }; - - dtb@1e000000 { - reg = <0x1e000000 0x01000000>; - read-only; - }; - - empty@1f000000 { - reg = <0x1f000000 0x21000000>; - }; - }; - - nand@4,0 { - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x4 0x0 0x40000>; - }; - - nand@5,0 { - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x5 0x0 0x40000>; - }; - - nand@6,0 { - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x6 0x0 0x40000>; - }; }; - soc8572@fffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; + board_soc: soc: soc8572@fffe00000 { ranges = <0x0 0xf 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,mpc8572-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8572-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - memory-controller@6000 { - compatible = "fsl,mpc8572-memory-controller"; - reg = <0x6000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8572-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x100000>; // L2, 1M - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; - reg = <0xc300 0x4>; - ranges = <0x0 0xc100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <76 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <77 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <78 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <79 2>; - }; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x2>; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x3>; - }; - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet3: ethernet@27000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <3>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x27000 0x1000>; - ranges = <0x0 0x27000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <37 2 38 2 39 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi3>; - phy-handle = <&phy3>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,mpc8572-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - msi@41600 { - compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - crypto@30000 { - compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", - "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x9fe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; }; - pci0: pcie@fffe08000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; + board_pci0: pci0: pcie@fffe08000 { reg = <0xf 0xffe08000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; - interrupt-map-mask = <0xff00 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x11 func 0 - PCI slot 1 */ - 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 1 - PCI slot 1 */ - 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 2 - PCI slot 1 */ - 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 3 - PCI slot 1 */ - 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 4 - PCI slot 1 */ - 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 5 - PCI slot 1 */ - 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 6 - PCI slot 1 */ - 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 7 - PCI slot 1 */ - 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x12 func 0 - PCI slot 2 */ - 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 1 - PCI slot 2 */ - 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 2 - PCI slot 2 */ - 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 3 - PCI slot 2 */ - 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 4 - PCI slot 2 */ - 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 5 - PCI slot 2 */ - 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 6 - PCI slot 2 */ - 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 7 - PCI slot 2 */ - 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 - - // IDSEL 0x1c USB - 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 - 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 - 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 - 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 - - // IDSEL 0x1d Audio - 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 - - // IDSEL 0x1e Legacy - 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 - 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 - - // IDSEL 0x1f IDE/SATA - 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 - 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 - - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 @@ -667,99 +47,14 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 0x0 0x10000>; - uli1575@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x2000000 0x0 0xe0000000 - 0x2000000 0x0 0xe0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - isa@1e { - device_type = "isa"; - #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <0xf000 0x0 0x0 0x0 0x0>; - ranges = <0x1 0x0 0x1000000 0x0 0x0 - 0x1000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - reg = <0x1 0x20 0x2 - 0x1 0xa0 0x2 - 0x1 0x4d0 0x2>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = <&mpic>; - }; - - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <0x1 0x60 0x1 0x1 0x64 0x1>; - interrupts = <1 3 12 3>; - interrupt-parent = - <&i8259>; - - keyboard@0 { - reg = <0x0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <0x1>; - compatible = "pnpPNP,f03"; - }; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <0x1 0x70 0x2>; - }; - - gpio@400 { - reg = <0x1 0x400 0x80>; - }; - }; - }; }; - }; pci1: pcie@fffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xffe09000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 @@ -771,31 +66,10 @@ }; pci2: pcie@fffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xffe0a000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 @@ -806,3 +80,11 @@ }; }; }; + +/* + * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "fsl/mpc8572si-post.dtsi" +/include/ "mpc8572ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts index 3375c2ab0c32..d34d12712125 100644 --- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts +++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts @@ -14,494 +14,69 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc8572ds.dts" + / { model = "fsl,MPC8572DS"; compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - pci0 = &pci0; - pci1 = &pci1; - }; cpus { - #address-cells = <1>; - #size-cells = <0>; - PowerPC,8572@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; }; - + PowerPC,8572@1 { + status = "disabled"; + }; }; - memory { - device_type = "memory"; - reg = <0x0 0x0>; // Filled by U-Boot + localbus@ffe05000 { + status = "disabled"; }; soc8572@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; + serial@4600 { + status = "disabled"; }; - - ecm@1000 { - compatible = "fsl,mpc8572-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; + dma@c300 { + status = "disabled"; }; - - memory-controller@2000 { - compatible = "fsl,mpc8572-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; + gpio-controller@f000 { }; - - memory-controller@6000 { - compatible = "fsl,mpc8572-memory-controller"; - reg = <0x6000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8572-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes + l2-cache-controller@20000 { cache-size = <0x80000>; // L2, 512K - interrupt-parent = <&mpic>; - interrupts = <16 2>; }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; + ethernet@26000 { + status = "disabled"; }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; + mdio@26520 { + status = "disabled"; }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; + ethernet@27000 { + status = "disabled"; }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x1>; - }; - }; + mdio@27520 { + status = "disabled"; }; - - enet1: ethernet@25000 { - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; + pic@40000 { + protected-sources = < + 31 32 33 37 38 39 /* enet2 enet3 */ + 76 77 78 79 26 42 /* dma2 pci2 serial*/ + 0xe4 0xe5 0xe6 0xe7 /* msi */ + >; }; msi@41600 { - compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; msi-available-ranges = <0 0x80>; interrupts = < 0xe0 0 0xe1 0 0xe2 0 0xe3 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,mpc8572-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - crypto@30000 { - compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", - "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x9fe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - protected-sources = < - 31 32 33 37 38 39 /* enet2 enet3 */ - 76 77 78 79 26 42 /* dma2 pci2 serial*/ - 0xe4 0xe5 0xe6 0xe7 /* msi */ - >; }; - }; - - pci0: pcie@ffe08000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xffe08000 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; - interrupt-map-mask = <0xff00 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x11 func 0 - PCI slot 1 */ - 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 1 - PCI slot 1 */ - 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 2 - PCI slot 1 */ - 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 3 - PCI slot 1 */ - 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 4 - PCI slot 1 */ - 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 5 - PCI slot 1 */ - 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 6 - PCI slot 1 */ - 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 7 - PCI slot 1 */ - 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x12 func 0 - PCI slot 2 */ - 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 1 - PCI slot 2 */ - 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 2 - PCI slot 2 */ - 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 3 - PCI slot 2 */ - 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 4 - PCI slot 2 */ - 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 5 - PCI slot 2 */ - 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 6 - PCI slot 2 */ - 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 7 - PCI slot 2 */ - 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 - - // IDSEL 0x1c USB - 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 - 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 - 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 - 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 - - // IDSEL 0x1d Audio - 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 - - // IDSEL 0x1e Legacy - 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 - 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 - - // IDSEL 0x1f IDE/SATA - 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 - 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 - - >; - - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - uli1575@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - isa@1e { - device_type = "isa"; - #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <0xf000 0x0 0x0 0x0 0x0>; - ranges = <0x1 0x0 0x1000000 0x0 0x0 - 0x1000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - reg = <0x1 0x20 0x2 - 0x1 0xa0 0x2 - 0x1 0x4d0 0x2>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = <&mpic>; - }; - - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <0x1 0x60 0x1 0x1 0x64 0x1>; - interrupts = <1 3 12 3>; - interrupt-parent = - <&i8259>; - - keyboard@0 { - reg = <0x0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <0x1>; - compatible = "pnpPNP,f03"; - }; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <0x1 0x70 0x2>; - }; - - gpio@400 { - reg = <0x1 0x400 0x80>; - }; - }; - }; + timer@42100 { + status = "disabled"; }; - }; - - pci1: pcie@ffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xffe09000 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - }; + pcie@ffe0a000 { + status = "disabled"; }; }; diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts index e7b477f6a3fe..d6a8fafc0d0d 100644 --- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts +++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts @@ -15,169 +15,74 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc8572ds.dts" + / { model = "fsl,MPC8572DS"; compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet2 = &enet2; - ethernet3 = &enet3; - serial0 = &serial0; - pci2 = &pci2; - }; cpus { - #address-cells = <1>; - #size-cells = <0>; - + PowerPC,8572@0 { + status = "disabled"; + }; PowerPC,8572@1 { - device_type = "cpu"; - reg = <0x1>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; }; }; - memory { - device_type = "memory"; - reg = <0x0 0x0>; // Filled by U-Boot + localbus@ffe05000 { + status = "disabled"; }; soc8572@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8572-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2, 512K - interrupt-parent = <&mpic>; + ecm-law@0 { + status = "disabled"; }; - - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; - reg = <0xc300 0x4>; - ranges = <0x0 0xc100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <76 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <77 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <78 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <79 2>; - }; + ecm@1000 { + status = "disabled"; + }; + memory-controller@2000 { + status = "disabled"; + }; + memory-controller@6000 { + status = "disabled"; + }; + i2c@3000 { + status = "disabled"; + }; + i2c@3100 { + status = "disabled"; + }; + serial@4500 { + status = "disabled"; + }; + gpio-controller@f000 { + status = "disabled"; + }; + l2-cache-controller@20000 { + cache-size = <0x80000>; // L2, 512K + }; + dma@21300 { + status = "disabled"; + }; + ethernet@24000 { + status = "disabled"; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - reg = <0x2>; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - reg = <0x3>; - }; + status = "disabled"; }; - - enet2: ethernet@26000 { - cell-index = <2>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy2>; - phy-connection-type = "rgmii-id"; + ptp_clock@24e00 { + status = "disabled"; }; - - enet3: ethernet@27000 { - cell-index = <3>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x27000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <37 2 38 2 39 2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy3>; - phy-connection-type = "rgmii-id"; + ethernet@25000 { + status = "disabled"; }; - - msi@41600 { - compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0x80 0x80>; - interrupts = < - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; + mdio@25520 { + status = "disabled"; }; - - serial0: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; + crypto@30000 { + status = "disabled"; }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; + pic@40000 { protected-sources = < 18 16 10 42 45 58 /* MEM L2 mdio serial crypto */ 29 30 34 35 36 40 /* enet0 enet1 */ @@ -189,41 +94,25 @@ 0xe0 0xe1 0xe2 0xe3 /* msi */ >; }; - }; - - pci2: pcie@ffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xffe0a000 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0xc0000000 - 0x2000000 0x0 0xc0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; + timer@41100 { + status = "disabled"; }; + msi@41600 { + msi-available-ranges = <0x80 0x80>; + interrupts = < + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + }; + global-utilities@e0000 { + status = "disabled"; + }; + }; + pcie@ffe08000 { + status = "disabled"; + }; + pcie@ffe09000 { + status = "disabled"; }; }; diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 83c3218cb4da..6a109a0ceac9 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -175,7 +175,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; @@ -186,7 +186,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 848320e4d3c4..1e8666ccbed8 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -26,13 +26,6 @@ serial1 = &serial1; pci0 = &pci0; pci1 = &pci1; -/* - * Only one of Rapid IO or PCI can be present due to HW limitations and - * due to the fact that the 2 now share address space in the new memory - * map. The most likely case is that we have PCI, so comment out the - * rapidio node. Leave it here for reference. - */ - /* rapidio0 = &rapidio0; */ }; cpus { @@ -335,7 +328,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; @@ -345,7 +338,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <28 2>; @@ -361,6 +354,41 @@ device_type = "open-pic"; }; + rmu: rmu@d3000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,srio-rmu"; + reg = <0xd3000 0x500>; + ranges = <0x0 0xd3000 0x500>; + + message-unit@0 { + compatible = "fsl,srio-msg-unit"; + reg = <0x0 0x100>; + interrupts = < + 53 2 /* msg1_tx_irq */ + 54 2>;/* msg1_rx_irq */ + }; + message-unit@100 { + compatible = "fsl,srio-msg-unit"; + reg = <0x100 0x100>; + interrupts = < + 55 2 /* msg2_tx_irq */ + 56 2>;/* msg2_rx_irq */ + }; + doorbell-unit@400 { + compatible = "fsl,srio-dbell-unit"; + reg = <0x400 0x80>; + interrupts = < + 49 2 /* bell_outb_irq */ + 50 2>;/* bell_inb_irq */ + }; + port-write-unit@4e0 { + compatible = "fsl,srio-port-write-unit"; + reg = <0x4e0 0x20>; + interrupts = <48 2>; + }; + }; + global-utilities@e0000 { compatible = "fsl,mpc8641-guts"; reg = <0xe0000 0x1000>; @@ -612,16 +640,27 @@ }; }; /* - rapidio0: rapidio@ffec0000 { + * Only one of Rapid IO or PCI can be present due to HW limitations and + * due to the fact that the 2 now share address space in the new memory + * map. The most likely case is that we have PCI, so comment out the + * rapidio node. Leave it here for reference. + + rapidio@ffec0000 { + reg = <0xffec0000 0x11000>; + compatible = "fsl,srio"; + interrupt-parent = <&mpic>; + interrupts = <48 2>; #address-cells = <2>; #size-cells = <2>; - compatible = "fsl,rapidio-delta"; - reg = <0xffec0000 0x20000>; - ranges = <0 0 0x80000000 0 0x20000000>; - interrupt-parent = <&mpic>; - // err_irq bell_outb_irq bell_inb_irq - // msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq - interrupts = <48 2 49 2 50 2 53 2 54 2 55 2 56 2>; + fsl,srio-rmu-handle = <&rmu>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + ranges = <0 0 0x80000000 0 0x20000000>; + }; }; */ diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts index 8be8e701e1d3..fd4cd4da60b5 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts @@ -328,7 +328,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; @@ -338,7 +338,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <28 2>; diff --git a/arch/powerpc/boot/dts/obs600.dts b/arch/powerpc/boot/dts/obs600.dts new file mode 100644 index 000000000000..18e7d79ee4c3 --- /dev/null +++ b/arch/powerpc/boot/dts/obs600.dts @@ -0,0 +1,314 @@ +/* + * Device Tree Source for PlatHome OpenBlockS 600 (405EX) + * + * Copyright 2011 Ben Herrenschmidt, IBM Corp. + * + * Based on Kilauea by: + * + * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "PlatHome,OpenBlockS 600"; + compatible = "plathome,obs600"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405EX"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; /* 16 kB */ + d-cache-size = <16384>; /* 16 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic-405ex", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + CPM0: cpm { + compatible = "ibm,cpm"; + dcr-access-method = "native"; + dcr-reg = <0x0b0 0x003>; + unused-units = <0x00000000>; + idle-doze = <0x02000000>; + standby = <0xe3e74800>; + }; + + plb { + compatible = "ibm,plb-405ex", "ibm,plb4"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; + dcr-reg = <0x010 0x002>; + interrupt-parent = <&UIC2>; + interrupts = <0x5 0x4 /* ECC DED Error */ + 0x6 0x4>; /* ECC SEC Error */ + }; + + CRYPTO: crypto@ef700000 { + compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto"; + reg = <0xef700000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x17 0x2>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + interrupt-map-mask = <0xffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-405ex", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x80000000 0x80000000 0x10000000 + 0xef600000 0xef600000 0x00a00000 + 0xf0000000 0xf0000000 0x10000000>; + dcr-reg = <0x0a0 0x005>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-405ex", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x08000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel + initrd"; + reg = <0x00000000 0x03de0000>; + }; + partition@3de0000 { + label = "user config area"; + reg = <0x03de0000 0x00080000>; + }; + partition@3e60000 { + label = "user program area"; + reg = <0x03e60000 0x04000000>; + }; + partition@7e60000 { + label = "flat device tree"; + reg = <0x07e60000 0x00080000>; + }; + partition@7ee0000 { + label = "test program"; + reg = <0x07ee0000 0x00080000>; + }; + partition@7f60000 { + label = "u-boot env"; + reg = <0x07f60000 0x00040000>; + }; + partition@7fa0000 { + label = "u-boot"; + reg = <0x07fa0000 0x00060000>; + }; + }; + }; + + UART0: serial@ef600200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1a 0x4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600400 { + compatible = "ibm,iic-405ex", "ibm,iic"; + reg = <0xef600400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@68 { + compatible = "dallas,ds1340"; + reg = <0x68>; + }; + }; + + IIC1: i2c@ef600500 { + compatible = "ibm,iic-405ex", "ibm,iic"; + reg = <0xef600500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x7 0x4>; + }; + + RGMII0: emac-rgmii@ef600b00 { + compatible = "ibm,rgmii-405ex", "ibm,rgmii"; + reg = <0xef600b00 0x00000104>; + has-mdio; + }; + + EMAC0: ethernet@ef600900 { + linux,network-index = <0x0>; + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 + /*Wake*/ 0x1 &UIC1 0x1d 0x4>; + reg = <0xef600900 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600a00 { + linux,network-index = <0x1>; + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4sync"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4 + /*Wake*/ 0x1 &UIC1 0x1f 0x4>; + reg = <0xef600a00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + GPIO: gpio@ef600800 { + device_type = "gpio"; + compatible = "ibm,gpio-405ex", "ibm,ppc4xx-gpio"; + reg = <0xef600800 0x50>; + }; + }; + }; + chosen { + linux,stdout-path = "/plb/opb/serial@ef600200"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts index d6c669c888e9..b868d22984e9 100644 --- a/arch/powerpc/boot/dts/p1010rdb.dts +++ b/arch/powerpc/boot/dts/p1010rdb.dts @@ -9,230 +9,33 @@ * option) any later version. */ -/include/ "p1010si.dtsi" +/include/ "fsl/p1010si-pre.dtsi" / { model = "fsl,P1010RDB"; compatible = "fsl,P1010RDB"; - aliases { - serial0 = &serial0; - serial1 = &serial1; - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - pci0 = &pci0; - pci1 = &pci1; - can0 = &can0; - can1 = &can1; - }; - memory { device_type = "memory"; }; - ifc@ffe1e000 { + board_ifc: ifc: ifc@ffe1e000 { /* NOR, NAND Flashes and CPLD on board */ ranges = <0x0 0x0 0x0 0xee000000 0x02000000 0x1 0x0 0x0 0xff800000 0x00010000 0x3 0x0 0x0 0xffb00000 0x00000020>; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x2000000>; - bank-width = <2>; - device-width = <1>; - - partition@40000 { - /* 256KB for DTB Image */ - reg = <0x00040000 0x00040000>; - label = "NOR DTB Image"; - }; - - partition@80000 { - /* 7 MB for Linux Kernel Image */ - reg = <0x00080000 0x00700000>; - label = "NOR Linux Kernel Image"; - }; - - partition@800000 { - /* 20MB for JFFS2 based Root file System */ - reg = <0x00800000 0x01400000>; - label = "NOR JFFS2 Root File System"; - }; - - partition@1f00000 { - /* This location must not be altered */ - /* 512KB for u-boot Bootloader Image */ - /* 512KB for u-boot Environment Variables */ - reg = <0x01f00000 0x00100000>; - label = "NOR U-Boot Image"; - read-only; - }; - }; - - nand@1,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,ifc-nand"; - reg = <0x1 0x0 0x10000>; - - partition@0 { - /* This location must not be altered */ - /* 1MB for u-boot Bootloader Image */ - reg = <0x0 0x00100000>; - label = "NAND U-Boot Image"; - read-only; - }; - - partition@100000 { - /* 1MB for DTB Image */ - reg = <0x00100000 0x00100000>; - label = "NAND DTB Image"; - }; - - partition@200000 { - /* 4MB for Linux Kernel Image */ - reg = <0x00200000 0x00400000>; - label = "NAND Linux Kernel Image"; - }; - - partition@600000 { - /* 4MB for Compressed Root file System Image */ - reg = <0x00600000 0x00400000>; - label = "NAND Compressed RFS Image"; - }; - - partition@a00000 { - /* 15MB for JFFS2 based Root file System */ - reg = <0x00a00000 0x00f00000>; - label = "NAND JFFS2 Root File System"; - }; - - partition@1900000 { - /* 7MB for User Area */ - reg = <0x01900000 0x00700000>; - label = "NAND User area"; - }; - }; - - cpld@3,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p1010rdb-cpld"; - reg = <0x3 0x0 0x0000020>; - bank-width = <1>; - device-width = <1>; - }; + reg = <0x0 0xffe1e000 0 0x2000>; }; - soc@ffe00000 { - spi@7000 { - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,s25sl12801"; - reg = <0>; - spi-max-frequency = <50000000>; - - partition@0 { - /* 1MB for u-boot Bootloader Image */ - /* 1MB for Environment */ - reg = <0x0 0x00100000>; - label = "SPI Flash U-Boot Image"; - read-only; - }; - - partition@100000 { - /* 512KB for DTB Image */ - reg = <0x00100000 0x00080000>; - label = "SPI Flash DTB Image"; - }; - - partition@180000 { - /* 4MB for Linux Kernel Image */ - reg = <0x00180000 0x00400000>; - label = "SPI Flash Linux Kernel Image"; - }; - - partition@580000 { - /* 4MB for Compressed RFS Image */ - reg = <0x00580000 0x00400000>; - label = "SPI Flash Compressed RFSImage"; - }; - - partition@980000 { - /* 6.5MB for JFFS2 based RFS */ - reg = <0x00980000 0x00680000>; - label = "SPI Flash JFFS2 RFS"; - }; - }; - }; - - usb@22000 { - phy_type = "utmi"; - }; - - mdio@24000 { - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x1>; - }; - - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <2 1>; - reg = <0x0>; - }; - - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <2 1>; - reg = <0x2>; - }; - }; - - enet0: ethernet@b0000 { - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - }; - - enet1: ethernet@b1000 { - phy-handle = <&phy1>; - tbi-handle = <&tbi0>; - phy-connection-type = "sgmii"; - }; - - enet2: ethernet@b2000 { - phy-handle = <&phy2>; - tbi-handle = <&tbi1>; - phy-connection-type = "sgmii"; - }; + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; }; pci0: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; - ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000 @@ -244,24 +47,10 @@ }; pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 @@ -272,3 +61,6 @@ }; }; }; + +/include/ "p1010rdb.dtsi" +/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi new file mode 100644 index 000000000000..d4c4a7730285 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb.dtsi @@ -0,0 +1,234 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_ifc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 7 MB for Linux Kernel Image */ + reg = <0x00080000 0x00700000>; + label = "NOR Linux Kernel Image"; + }; + + partition@800000 { + /* 20MB for JFFS2 based Root file System */ + reg = <0x00800000 0x01400000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@1f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x01f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00f00000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1900000 { + /* 7MB for User Area */ + reg = <0x01900000 0x00700000>; + label = "NAND User area"; + }; + }; + + cpld@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1010rdb-cpld"; + reg = <0x3 0x0 0x0000020>; + bank-width = <1>; + device-width = <1>; + }; +}; + +&board_soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + /* 1MB for u-boot Bootloader Image */ + /* 1MB for Environment */ + reg = <0x0 0x00100000>; + label = "SPI Flash U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 512KB for DTB Image */ + reg = <0x00100000 0x00080000>; + label = "SPI Flash DTB Image"; + }; + + partition@180000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00180000 0x00400000>; + label = "SPI Flash Linux Kernel Image"; + }; + + partition@580000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00580000 0x00400000>; + label = "SPI Flash Compressed RFSImage"; + }; + + partition@980000 { + /* 6.5MB for JFFS2 based RFS */ + reg = <0x00980000 0x00680000>; + label = "SPI Flash JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "utmi"; + dr_mode = "host"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x0>; + }; + + phy2: ethernet-phy@2 { + interrupts = <2 1 0 0>; + reg = <0x2>; + }; + + tbi-phy@3 { + device-type = "tbi-phy"; + reg = <0x3>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy2>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dts b/arch/powerpc/boot/dts/p1010rdb_36b.dts new file mode 100644 index 000000000000..64776f4a4651 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb_36b.dts @@ -0,0 +1,89 @@ +/* + * P1010 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB"; + compatible = "fsl,P1010RDB"; + + memory { + device_type = "memory"; + }; + + board_ifc: ifc: ifc@fffe1e000 { + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0xf 0xee000000 0x02000000 + 0x1 0x0 0xf 0xff800000 0x00010000 + 0x3 0x0 0xf 0xffb00000 0x00000020>; + reg = <0xf 0xffe1e000 0 0x2000>; + }; + + board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1010rdb.dtsi" +/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010si.dtsi b/arch/powerpc/boot/dts/p1010si.dtsi deleted file mode 100644 index cabe0a453ae6..000000000000 --- a/arch/powerpc/boot/dts/p1010si.dtsi +++ /dev/null @@ -1,374 +0,0 @@ -/* - * P1010si Device Tree Source - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/dts-v1/; -/ { - compatible = "fsl,P1010"; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,P1010@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - }; - - ifc@ffe1e000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; - reg = <0x0 0xffe1e000 0 0x2000>; - interrupts = <16 2 19 2>; - interrupt-parent = <&mpic>; - }; - - soc@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,p1010-immr", "simple-bus"; - ranges = <0x0 0x0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p1010-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <16 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,p1010-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - spi@7000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc8536-espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2>; - interrupt-parent = <&mpic>; - fsl,espi-num-chipselects = <1>; - }; - - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,mpc8572-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2>; - interrupt-parent = <&mpic>; - gpio-controller; - }; - - sata@18000 { - compatible = "fsl,pq-sata-v2"; - reg = <0x18000 0x1000>; - cell-index = <1>; - interrupts = <74 0x2>; - interrupt-parent = <&mpic>; - }; - - sata@19000 { - compatible = "fsl,pq-sata-v2"; - reg = <0x19000 0x1000>; - cell-index = <2>; - interrupts = <41 0x2>; - interrupt-parent = <&mpic>; - }; - - can0: can@1c000 { - compatible = "fsl,p1010-flexcan"; - reg = <0x1c000 0x1000>; - interrupts = <48 0x2>; - interrupt-parent = <&mpic>; - }; - - can1: can@1d000 { - compatible = "fsl,p1010-flexcan"; - reg = <0x1d000 0x1000>; - interrupts = <61 0x2>; - interrupt-parent = <&mpic>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,p1010-l2-cache-controller", - "fsl,p1014-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2,256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p1010-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - usb@22000 { - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; - dr_mode = "host"; - }; - - mdio@24000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-mdio"; - reg = <0x24000 0x1000 0xb0030 0x4>; - }; - - mdio@25000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-tbi"; - reg = <0x25000 0x1000 0xb1030 0x4>; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-tbi"; - reg = <0x26000 0x1000 0xb1030 0x4>; - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - sdhci@2e000 { - compatible = "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x8>; - interrupt-parent = <&mpic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - fsl,sdhci-auto-cmd12; - }; - - enet0: ethernet@b0000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; - - queue-group@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb0000 0x1000>; - fsl,rx-bit-map = <0xff>; - fsl,tx-bit-map = <0xff>; - interrupts = <29 2 30 2 34 2>; - }; - - }; - - enet1: ethernet@b1000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; - - queue-group@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb1000 0x1000>; - fsl,rx-bit-map = <0xff>; - fsl,tx-bit-map = <0xff>; - interrupts = <35 2 36 2 40 2>; - }; - - }; - - enet2: ethernet@b2000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; - - queue-group@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb2000 0x1000>; - fsl,rx-bit-map = <0xff>; - fsl,tx-bit-map = <0xff>; - interrupts = <31 2 32 2 33 2>; - }; - - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,p1010-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,p1010-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - }; - - pci0: pcie@ffe09000 { - compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe09000 0 0x1000>; - bus-range = <0 255>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - pci1: pcie@ffe0a000 { - compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe0a000 0 0x1000>; - bus-range = <0 255>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; -}; diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts index d6a8ae458137..518bf99b1f50 100644 --- a/arch/powerpc/boot/dts/p1020rdb.dts +++ b/arch/powerpc/boot/dts/p1020rdb.dts @@ -9,267 +9,33 @@ * option) any later version. */ -/include/ "p1020si.dtsi" - +/include/ "fsl/p1020si-pre.dtsi" / { model = "fsl,P1020RDB"; compatible = "fsl,P1020RDB"; - aliases { - serial0 = &serial0; - serial1 = &serial1; - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - pci0 = &pci0; - pci1 = &pci1; - }; - memory { device_type = "memory"; }; - localbus@ffe05000 { + board_lbc: lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ ranges = <0x0 0x0 0x0 0xef000000 0x01000000 0x1 0x0 0x0 0xffa00000 0x00040000 0x2 0x0 0x0 0xffb00000 0x00020000>; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x1000000>; - bank-width = <2>; - device-width = <1>; - - partition@0 { - /* This location must not be altered */ - /* 256KB for Vitesse 7385 Switch firmware */ - reg = <0x0 0x00040000>; - label = "NOR (RO) Vitesse-7385 Firmware"; - read-only; - }; - - partition@40000 { - /* 256KB for DTB Image */ - reg = <0x00040000 0x00040000>; - label = "NOR (RO) DTB Image"; - read-only; - }; - - partition@80000 { - /* 3.5 MB for Linux Kernel Image */ - reg = <0x00080000 0x00380000>; - label = "NOR (RO) Linux Kernel Image"; - read-only; - }; - - partition@400000 { - /* 11MB for JFFS2 based Root file System */ - reg = <0x00400000 0x00b00000>; - label = "NOR (RW) JFFS2 Root File System"; - }; - - partition@f00000 { - /* This location must not be altered */ - /* 512KB for u-boot Bootloader Image */ - /* 512KB for u-boot Environment Variables */ - reg = <0x00f00000 0x00100000>; - label = "NOR (RO) U-Boot Image"; - read-only; - }; - }; - - nand@1,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p1020-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x1 0x0 0x40000>; - - partition@0 { - /* This location must not be altered */ - /* 1MB for u-boot Bootloader Image */ - reg = <0x0 0x00100000>; - label = "NAND (RO) U-Boot Image"; - read-only; - }; - - partition@100000 { - /* 1MB for DTB Image */ - reg = <0x00100000 0x00100000>; - label = "NAND (RO) DTB Image"; - read-only; - }; - - partition@200000 { - /* 4MB for Linux Kernel Image */ - reg = <0x00200000 0x00400000>; - label = "NAND (RO) Linux Kernel Image"; - read-only; - }; - - partition@600000 { - /* 4MB for Compressed Root file System Image */ - reg = <0x00600000 0x00400000>; - label = "NAND (RO) Compressed RFS Image"; - read-only; - }; - - partition@a00000 { - /* 7MB for JFFS2 based Root file System */ - reg = <0x00a00000 0x00700000>; - label = "NAND (RW) JFFS2 Root File System"; - }; - - partition@1100000 { - /* 15MB for JFFS2 based Root file System */ - reg = <0x01100000 0x00f00000>; - label = "NAND (RW) Writable User area"; - }; - }; - - L2switch@2,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "vitesse-7385"; - reg = <0x2 0x0 0x20000>; - }; - }; - soc@ffe00000 { - i2c@3000 { - rtc@68 { - compatible = "dallas,ds1339"; - reg = <0x68>; - }; - }; - - spi@7000 { - - fsl_m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,espi-flash"; - reg = <0>; - linux,modalias = "fsl_m25p80"; - modal = "s25sl128b"; - spi-max-frequency = <50000000>; - mode = <0>; - - partition@0 { - /* 512KB for u-boot Bootloader Image */ - reg = <0x0 0x00080000>; - label = "SPI (RO) U-Boot Image"; - read-only; - }; - - partition@80000 { - /* 512KB for DTB Image */ - reg = <0x00080000 0x00080000>; - label = "SPI (RO) DTB Image"; - read-only; - }; - - partition@100000 { - /* 4MB for Linux Kernel Image */ - reg = <0x00100000 0x00400000>; - label = "SPI (RO) Linux Kernel Image"; - read-only; - }; - - partition@500000 { - /* 4MB for Compressed RFS Image */ - reg = <0x00500000 0x00400000>; - label = "SPI (RO) Compressed RFS Image"; - read-only; - }; - - partition@900000 { - /* 7MB for JFFS2 based RFS */ - reg = <0x00900000 0x00700000>; - label = "SPI (RW) JFFS2 RFS"; - }; - }; - }; - - mdio@24000 { - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x0>; - }; - - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <2 1>; - reg = <0x1>; - }; - }; - - mdio@25000 { - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet0: ethernet@b0000 { - fixed-link = <1 1 1000 0 0>; - phy-connection-type = "rgmii-id"; - - }; - - enet1: ethernet@b1000 { - phy-handle = <&phy0>; - tbi-handle = <&tbi0>; - phy-connection-type = "sgmii"; - - }; - - enet2: ethernet@b2000 { - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - - }; - - usb@22000 { - phy_type = "ulpi"; - }; - - /* USB2 is shared with localbus, so it must be disabled - by default. We can't put 'status = "disabled";' here - since U-Boot doesn't clear the status property when - it enables USB2. OTOH, U-Boot does create a new node - when there isn't any. So, just comment it out. - usb@23000 { - phy_type = "ulpi"; - }; - */ - + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; }; pci0: pcie@ffe09000 { ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; + reg = <0 0xffe09000 0 0x1000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000 @@ -281,21 +47,10 @@ }; pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 @@ -306,3 +61,6 @@ }; }; }; + +/include/ "p1020rdb.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb.dtsi b/arch/powerpc/boot/dts/p1020rdb.dtsi new file mode 100644 index 000000000000..b5bd86f4baf2 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb.dtsi @@ -0,0 +1,247 @@ +/* + * P1020 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR (RO) Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR (RO) DTB Image"; + read-only; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR (RO) Linux Kernel Image"; + read-only; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR (RW) JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR (RO) U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND (RO) U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND (RO) DTB Image"; + read-only; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND (RO) Linux Kernel Image"; + read-only; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND (RO) Compressed RFS Image"; + read-only; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND (RW) JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND (RW) Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; +}; + +&board_soc { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "u-boot"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "dtb"; + read-only; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "kernel"; + read-only; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "file system"; + read-only; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "file system jffs2"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + usb@23000 { + phy_type = "ulpi"; + }; + */ + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + }; + + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020rdb_36b.dts b/arch/powerpc/boot/dts/p1020rdb_36b.dts new file mode 100644 index 000000000000..bdbdb6097e57 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb_36b.dts @@ -0,0 +1,66 @@ +/* + * P1020 RDB Device Tree Source (36-bit address map) + * + * Copyright 2009-2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB"; + compatible = "fsl,P1020RDB"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xffa00000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts index f0bf7f42f097..41b4585c5da8 100644 --- a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts +++ b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts @@ -16,7 +16,7 @@ * option) any later version. */ -/include/ "p1020si.dtsi" +/include/ "p1020rdb.dts" / { model = "fsl,P1020RDB"; @@ -32,7 +32,7 @@ cpus { PowerPC,P1020@1 { - status = "disabled"; + status = "disabled"; }; }; @@ -45,169 +45,19 @@ }; soc@ffe00000 { - i2c@3000 { - rtc@68 { - compatible = "dallas,ds1339"; - reg = <0x68>; - }; - }; - serial1: serial@4600 { status = "disabled"; }; - spi@7000 { - fsl_m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,espi-flash"; - reg = <0>; - linux,modalias = "fsl_m25p80"; - spi-max-frequency = <40000000>; - - partition@0 { - /* 512KB for u-boot Bootloader Image */ - reg = <0x0 0x00080000>; - label = "SPI (RO) U-Boot Image"; - read-only; - }; - - partition@80000 { - /* 512KB for DTB Image */ - reg = <0x00080000 0x00080000>; - label = "SPI (RO) DTB Image"; - read-only; - }; - - partition@100000 { - /* 4MB for Linux Kernel Image */ - reg = <0x00100000 0x00400000>; - label = "SPI (RO) Linux Kernel Image"; - read-only; - }; - - partition@500000 { - /* 4MB for Compressed RFS Image */ - reg = <0x00500000 0x00400000>; - label = "SPI (RO) Compressed RFS Image"; - read-only; - }; - - partition@900000 { - /* 7MB for JFFS2 based RFS */ - reg = <0x00900000 0x00700000>; - label = "SPI (RW) JFFS2 RFS"; - }; - }; - }; - - mdio@24000 { - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <2 1>; - reg = <0x1>; - }; - }; - - mdio@25000 { - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@b0000 { status = "disabled"; }; - enet1: ethernet@b1000 { - phy-handle = <&phy0>; - tbi-handle = <&tbi0>; - phy-connection-type = "sgmii"; - }; - - enet2: ethernet@b2000 { - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - }; - - usb@22000 { - phy_type = "ulpi"; - }; - - /* USB2 is shared with localbus, so it must be disabled - by default. We can't put 'status = "disabled";' here - since U-Boot doesn't clear the status property when - it enables USB2. OTOH, U-Boot does create a new node - when there isn't any. So, just comment it out. - usb@23000 { - phy_type = "ulpi"; - }; - */ - mpic: pic@40000 { protected-sources = < 42 29 30 34 /* serial1, enet0-queue-group0 */ 17 18 24 45 /* enet0-queue-group1, crypto */ >; }; - - }; - - pci0: pcie@ffe09000 { - ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - pci1: pcie@ffe0a000 { - ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; }; }; diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts index 6ec02204a44e..517453821884 100644 --- a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts +++ b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts @@ -15,7 +15,7 @@ * option) any later version. */ -/include/ "p1020si.dtsi" +/include/ "p1020rdb.dts" / { model = "fsl,P1020RDB"; @@ -28,7 +28,7 @@ cpus { PowerPC,P1020@0 { - status = "disabled"; + status = "disabled"; }; }; @@ -85,12 +85,6 @@ status = "disabled"; }; - enet0: ethernet@b0000 { - fixed-link = <1 1 1000 0 0>; - phy-connection-type = "rgmii-id"; - - }; - enet1: ethernet@b1000 { status = "disabled"; }; @@ -135,7 +129,6 @@ global-utilities@e0000 { //global utilities block status = "disabled"; }; - }; pci0: pcie@ffe09000 { diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi deleted file mode 100644 index 5c5acb66c3fc..000000000000 --- a/arch/powerpc/boot/dts/p1020si.dtsi +++ /dev/null @@ -1,377 +0,0 @@ -/* - * P1020si Device Tree Source - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/dts-v1/; -/ { - compatible = "fsl,P1020"; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,P1020@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - - PowerPC,P1020@1 { - device_type = "cpu"; - reg = <0x1>; - next-level-cache = <&L2>; - }; - }; - - localbus@ffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus"; - reg = <0 0xffe05000 0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; - }; - - soc@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,p1020-immr", "simple-bus"; - ranges = <0x0 0x0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p1020-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <16 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,p1020-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - spi@7000 { - cell-index = <0>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2>; - interrupt-parent = <&mpic>; - mode = "cpu"; - }; - - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,mpc8572-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2>; - interrupt-parent = <&mpic>; - gpio-controller; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,p1020-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2,256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - mdio@24000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-mdio"; - reg = <0x24000 0x1000 0xb0030 0x4>; - - }; - - mdio@25000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-tbi"; - reg = <0x25000 0x1000 0xb1030 0x4>; - - }; - - enet0: ethernet@b0000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; - - queue-group@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb0000 0x1000>; - interrupts = <29 2 30 2 34 2>; - }; - - queue-group@1 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb4000 0x1000>; - interrupts = <17 2 18 2 24 2>; - }; - }; - - enet1: ethernet@b1000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; - - queue-group@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb1000 0x1000>; - interrupts = <35 2 36 2 40 2>; - }; - - queue-group@1 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb5000 0x1000>; - interrupts = <51 2 52 2 67 2>; - }; - }; - - enet2: ethernet@b2000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; - - queue-group@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb2000 0x1000>; - interrupts = <31 2 32 2 33 2>; - }; - - queue-group@1 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb6000 0x1000>; - interrupts = <25 2 26 2 27 2>; - }; - }; - - usb@22000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; - }; - - /* USB2 is shared with localbus, so it must be disabled - by default. We can't put 'status = "disabled";' here - since U-Boot doesn't clear the status property when - it enables USB2. OTOH, U-Boot does create a new node - when there isn't any. So, just comment it out. - usb@23000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x23000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <46 0x2>; - phy_type = "ulpi"; - }; - */ - - sdhci@2e000 { - compatible = "fsl,p1020-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2>; - interrupt-parent = <&mpic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - - crypto@30000 { - compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", - "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xbfe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,p1020-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,p1020-guts","fsl,p2020-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - }; - - pci0: pcie@ffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe09000 0 0x1000>; - bus-range = <0 255>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - pci1: pcie@ffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe0a000 0 0x1000>; - bus-range = <0 255>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; -}; diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts index ad5b85269004..d9540791e434 100644 --- a/arch/powerpc/boot/dts/p1021mds.dts +++ b/arch/powerpc/boot/dts/p1021mds.dts @@ -9,53 +9,22 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/p1021si-pre.dtsi" / { model = "fsl,P1021"; compatible = "fsl,P1021MDS"; - #address-cells = <2>; - #size-cells = <2>; aliases { - serial0 = &serial0; - serial1 = &serial1; - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; ethernet3 = &enet3; ethernet4 = &enet4; - pci0 = &pci0; - pci1 = &pci1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,P1021@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - - PowerPC,P1021@1 { - device_type = "cpu"; - reg = <0x1>; - next-level-cache = <&L2>; - }; }; memory { device_type = "memory"; }; - localbus@ffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus"; - reg = <0 0xffe05000 0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0x0 0x1000>; /* NAND Flash, BCSR, PMC0/1*/ ranges = <0x0 0x0 0x0 0xfc000000 0x02000000 @@ -138,99 +107,26 @@ }; }; - soc@ffe00000 { - - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; + soc: soc@ffe00000 { compatible = "fsl,p1021-immr", "simple-bus"; - ranges = <0x0 0x0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p1021-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <16 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,p1021-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; + ranges = <0x0 0x0 0xffe00000 0x100000>; i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; rtc@68 { compatible = "dallas,ds1374"; reg = <0x68>; }; }; - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - spi@7000 { - cell-index = <0>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2>; - interrupt-parent = <&mpic>; - espi,num-ss-bits = <4>; - mode = "cpu"; - - fsl_m25p80@0 { + + flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,espi-flash"; + compatible = "spansion,s25sl12801"; reg = <0>; - linux,modalias = "fsl_m25p80"; spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { label = "u-boot-spi"; reg = <0x00000000 0x00100000>; @@ -253,237 +149,49 @@ }; }; - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,mpc8572-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2>; - interrupt-parent = <&mpic>; - gpio-controller; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,p1021-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2,256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - usb@22000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; phy_type = "ulpi"; }; - mdio@24000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-mdio"; - reg = <0x24000 0x1000 0xb0030 0x4>; - + mdio@24000 { phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <1 1>; + interrupts = <1 1 0 0>; reg = <0x0>; }; phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <2 1>; + interrupts = <2 1 0 0>; reg = <0x1>; }; phy4: ethernet-phy@4 { - interrupt-parent = <&mpic>; reg = <0x4>; }; + tbi-phy@5 { + device_type = "tbi-phy"; + reg = <0x5>; + }; }; mdio@25000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-tbi"; - reg = <0x25000 0x1000 0xb1030 0x4>; tbi0: tbi-phy@11 { reg = <0x11>; device_type = "tbi-phy"; }; }; - enet0: ethernet@B0000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; + ethernet@b0000 { phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; - queue-group@0{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB0000 0x1000>; - interrupts = <29 2 30 2 34 2>; - }; - queue-group@1{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB4000 0x1000>; - interrupts = <17 2 18 2 24 2>; - }; }; - enet1: ethernet@B1000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; + ethernet@b1000 { phy-handle = <&phy4>; tbi-handle = <&tbi0>; phy-connection-type = "sgmii"; - queue-group@0{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB1000 0x1000>; - interrupts = <35 2 36 2 40 2>; - }; - queue-group@1{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB5000 0x1000>; - interrupts = <51 2 52 2 67 2>; - }; }; - enet2: ethernet@B2000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; + ethernet@b2000 { phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; - queue-group@0{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB2000 0x1000>; - interrupts = <31 2 32 2 33 2>; - }; - queue-group@1{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB6000 0x1000>; - interrupts = <25 2 26 2 27 2>; - }; - }; - - sdhci@2e000 { - compatible = "fsl,p1021-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2>; - interrupt-parent = <&mpic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - - crypto@30000 { - compatible = "fsl,sec3.3", "fsl,sec3.1", - "fsl,sec3.0", "fsl,sec2.4", - "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x97c>; - fsl,descriptor-types-mask = <0x3a30abf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,p1021-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,p1021-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; }; par_io@e0100 { @@ -499,8 +207,7 @@ 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ - 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 -*/ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ @@ -535,31 +242,10 @@ }; pci0: pcie@ffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xffe09000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000 @@ -571,31 +257,10 @@ }; pci1: pcie@ffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xffe0a000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xc0000000 0x2000000 0x0 0xc0000000 0x0 0x20000000 @@ -606,36 +271,16 @@ }; }; - qe@ffe80000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "qe"; - compatible = "fsl,qe"; + qe: qe@ffe80000 { ranges = <0x0 0x0 0xffe80000 0x40000>; reg = <0 0xffe80000 0 0x480>; brg-frequency = <0>; bus-frequency = <0>; - fsl,qe-num-riscs = <1>; - fsl,qe-num-snums = <28>; status = "disabled"; /* no firmware loaded */ - qeic: interrupt-controller@80 { - interrupt-controller; - compatible = "fsl,qe-ic"; - #address-cells = <0>; - #interrupt-cells = <1>; - reg = <0x80 0x80>; - interrupts = <63 2 60 2>; //high:47 low:44 - interrupt-parent = <&mpic>; - }; - enet3: ucc@2000 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <1>; - reg = <0x2000 0x200>; - interrupts = <32>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "clk12"; tx-clock-name = "clk9"; @@ -645,20 +290,15 @@ }; mdio@2120 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x2120 0x18>; - compatible = "fsl,ucc-mdio"; - qe_phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <4 1>; + interrupts = <4 1 0 0>; reg = <0x0>; device_type = "ethernet-phy"; }; qe_phy1: ethernet-phy@03 { interrupt-parent = <&mpic>; - interrupts = <5 1>; + interrupts = <5 1 0 0>; reg = <0x3>; device_type = "ethernet-phy"; }; @@ -671,10 +311,6 @@ enet4: ucc@2400 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <5>; - reg = <0x2400 0x200>; - interrupts = <40>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "clk13"; @@ -682,18 +318,7 @@ phy-handle = <&qe_phy1>; phy-connection-type = "rmii"; }; - - muram@10000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,qe-muram", "fsl,cpm-muram"; - ranges = <0x0 0x10000 0x6000>; - - data-only@0 { - compatible = "fsl,qe-muram-data", - "fsl,cpm-muram-data"; - reg = <0x0 0x6000>; - }; - }; }; }; + +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts index b9b8719a6204..ef95717db4bc 100644 --- a/arch/powerpc/boot/dts/p1022ds.dts +++ b/arch/powerpc/boot/dts/p1022ds.dts @@ -8,57 +8,36 @@ * kind, whether express or implied. */ -/dts-v1/; +/include/ "fsl/p1022si-pre.dtsi" / { - model = "fsl,P1022"; + model = "fsl,P1022DS"; compatible = "fsl,P1022DS"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&mpic>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,P1022@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - - PowerPC,P1022@1 { - device_type = "cpu"; - reg = <0x1>; - next-level-cache = <&L2>; - }; - }; memory { device_type = "memory"; }; - localbus@fffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus"; - reg = <0 0xffe05000 0 0x1000>; - interrupts = <19 2 0 0>; - + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 0x1 0x0 0xf 0xe0000000 0x08000000 - 0x2 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0xf 0xff800000 0x00040000 0x3 0x0 0xf 0xffdf0000 0x00008000>; + /* + * This node is used to access the pixis via "indirect" mode, + * which is done by writing the pixis register index to chip + * select 0 and the value to/from chip select 1. Indirect + * mode is the only way to access the pixis when DIU video + * is enabled. Note that this assumes that the first column + * of the 'ranges' property above is the chip select number. + */ + board-control@0,0 { + compatible = "fsl,p1022ds-indirect-pixis"; + reg = <0x0 0x0 1 /* CS0 */ + 0x1 0x0 1>; /* CS1 */ + }; + nor@0,0 { #address-cells = <1>; #size-cells = <1>; @@ -161,51 +140,10 @@ }; }; - soc@fffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,p1022-immr", "simple-bus"; + soc: soc@fffe00000 { ranges = <0x0 0xf 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p1022-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <16 2 0 0>; - }; - - memory-controller@2000 { - compatible = "fsl,p1022-memory-controller"; - reg = <0x2000 0x1000>; - interrupts = <16 2 0 0>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2 0 0>; - dfsrr; - }; i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2 0 0>; - dfsrr; - wm8776:codec@1a { compatible = "wlf,wm8776"; reg = <0x1a>; @@ -216,41 +154,14 @@ }; }; - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2 0 0>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2 0 0>; - }; - spi@7000 { - cell-index = <0>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2 0 0>; - espi,num-ss-bits = <4>; - mode = "cpu"; - - fsl_m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,espi-flash"; + compatible = "spansion,s25sl12801"; reg = <0>; - linux,modalias = "fsl_m25p80"; spi-max-frequency = <40000000>; /* input clock */ + partition@0 { label = "u-boot-spi"; reg = <0x00000000 0x00100000>; @@ -274,115 +185,20 @@ }; ssi@15000 { - compatible = "fsl,mpc8610-ssi"; - cell-index = <0>; - reg = <0x15000 0x100>; - interrupts = <75 2 0 0>; fsl,mode = "i2s-slave"; codec-handle = <&wm8776>; - fsl,playback-dma = <&dma00>; - fsl,capture-dma = <&dma01>; - fsl,fifo-depth = <15>; fsl,ssi-asynchronous; }; - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0xc300 0x4>; - ranges = <0x0 0xc100 0x200>; - cell-index = <1>; - dma00: dma-channel@0 { - compatible = "fsl,ssi-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <76 2 0 0>; - }; - dma01: dma-channel@80 { - compatible = "fsl,ssi-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <77 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <78 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <79 2 0 0>; - }; - }; - - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,mpc8572-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2 0 0>; - gpio-controller; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,p1022-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2, 256K - interrupts = <16 2 0 0>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <20 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <21 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <22 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <23 2 0 0>; - }; - }; - usb@22000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - interrupts = <28 0x2 0 0>; phy_type = "ulpi"; }; - mdio@24000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-mdio"; - reg = <0x24000 0x1000 0xb0030 0x4>; + usb@23000 { + status = "disabled"; + }; + mdio@24000 { phy0: ethernet-phy@0 { interrupts = <3 1 0 0>; reg = <0x1>; @@ -391,189 +207,28 @@ interrupts = <9 1 0 0>; reg = <0x2>; }; + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; }; - mdio@25000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-mdio"; - reg = <0x25000 0x1000 0xb1030 0x4>; - }; - - enet0: ethernet@B0000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - fsl,magic-packet; - fsl,wake-on-filer; - local-mac-address = [ 00 00 00 00 00 00 ]; + ethernet@b0000 { phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; - queue-group@0{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB0000 0x1000>; - interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; - }; - queue-group@1{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB4000 0x1000>; - interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>; - }; }; - enet1: ethernet@B1000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; + ethernet@b1000 { phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; - queue-group@0{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB1000 0x1000>; - interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; - }; - queue-group@1{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB5000 0x1000>; - interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>; - }; - }; - - sdhci@2e000 { - compatible = "fsl,p1022-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2 0 0>; - fsl,sdhci-auto-cmd12; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - - crypto@30000 { - compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0", - "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", - "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 0 0 58 2 0 0>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x97c>; - fsl,descriptor-types-mask = <0x3a30abf>; - }; - - sata@18000 { - compatible = "fsl,p1022-sata", "fsl,pq-sata-v2"; - reg = <0x18000 0x1000>; - cell-index = <1>; - interrupts = <74 0x2 0 0>; - }; - - sata@19000 { - compatible = "fsl,p1022-sata", "fsl,pq-sata-v2"; - reg = <0x19000 0x1000>; - cell-index = <2>; - interrupts = <41 0x2 0 0>; - }; - - power@e0070{ - compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc"; - reg = <0xe0070 0x20>; - }; - - display@10000 { - compatible = "fsl,diu", "fsl,p1022-diu"; - reg = <0x10000 1000>; - interrupts = <64 2 0 0>; - }; - - timer@41100 { - compatible = "fsl,mpic-global-timer"; - reg = <0x41100 0x100 0x41300 4>; - interrupts = <0 0 3 0 - 1 0 3 0 - 2 0 3 0 - 3 0 3 0>; - }; - - timer@42100 { - compatible = "fsl,mpic-global-timer"; - reg = <0x42100 0x100 0x42300 4>; - interrupts = <4 0 3 0 - 5 0 3 0 - 6 0 3 0 - 7 0 3 0>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <4>; - reg = <0x40000 0x40000>; - compatible = "fsl,mpic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,p1022-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,p1022-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; }; }; pci0: pcie@fffe09000 { - compatible = "fsl,p1022-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xffe09000 0 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000 + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupts = <16 2 0 0>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 @@ -585,30 +240,11 @@ }; pci1: pcie@fffe0a000 { - compatible = "fsl,p1022-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xffe0a000 0 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000 + ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupts = <16 2 0 0>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 - >; pcie@0 { reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 @@ -619,32 +255,11 @@ }; }; - pci2: pcie@fffe0b000 { - compatible = "fsl,p1022-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xffe0b000 0 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupts = <16 2 0 0>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 8 1 - 0000 0 0 2 &mpic 9 1 - 0000 0 0 3 &mpic 10 1 - 0000 0 0 4 &mpic 11 1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 @@ -655,3 +270,5 @@ }; }; }; + +/include/ "fsl/p1022si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts index d3b478242ea9..beb6cb12e59d 100644 --- a/arch/powerpc/boot/dts/p1023rds.dts +++ b/arch/powerpc/boot/dts/p1023rds.dts @@ -34,137 +34,30 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/dts-v1/; +/include/ "fsl/p1023si-pre.dtsi" / { model = "fsl,P1023"; compatible = "fsl,P1023RDS"; #address-cells = <2>; #size-cells = <2>; - - aliases { - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - - crypto = &crypto; - sec_jr0 = &sec_jr0; - sec_jr1 = &sec_jr1; - sec_jr2 = &sec_jr2; - sec_jr3 = &sec_jr3; - rtic_a = &rtic_a; - rtic_b = &rtic_b; - rtic_c = &rtic_c; - rtic_d = &rtic_d; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: PowerPC,P1023@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - - cpu1: PowerPC,P1023@1 { - device_type = "cpu"; - reg = <0x1>; - next-level-cache = <&L2>; - }; - }; + interrupt-parent = <&mpic>; memory { device_type = "memory"; }; - soc@ff600000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,p1023-immr", "simple-bus"; + soc: soc@ff600000 { ranges = <0x0 0x0 0xff600000 0x200000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p1023-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <16 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,p1023-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; rtc@68 { compatible = "dallas,ds1374"; reg = <0x68>; }; }; - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - spi@7000 { - cell-index = <0>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,p1023-espi", "fsl,mpc8536-espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2>; - interrupt-parent = <&mpic>; - fsl,espi-num-chipselects = <4>; - fsl_dataflash@0 { #address-cells = <1>; #size-cells = <1>; @@ -186,197 +79,14 @@ }; }; - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,qoriq-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2>; - interrupt-parent = <&mpic>; - gpio-controller; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,p1023-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2,256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - usb@22000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; dr_mode = "host"; phy_type = "ulpi"; }; - - crypto: crypto@300000 { - compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x30000 0x10000>; - ranges = <0 0x30000 0x10000>; - interrupt-parent = <&mpic>; - interrupts = <58 2>; - - sec_jr0: jr@1000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupts = <45 2>; - }; - - sec_jr1: jr@2000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupts = <45 2>; - }; - - sec_jr2: jr@3000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupts = <57 2>; - }; - - sec_jr3: jr@4000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x4000 0x1000>; - interrupts = <57 2>; - }; - - rtic@6000 { - compatible = "fsl,sec-v4.2-rtic", - "fsl,sec-v4.0-rtic"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x6000 0x100>; - ranges = <0x0 0x6100 0xe00>; - - rtic_a: rtic-a@0 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x80>; - }; - - rtic_b: rtic-b@20 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x80>; - }; - - rtic_c: rtic-c@40 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x80>; - }; - - rtic_d: rtic-d@60 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x500 0x80>; - }; - }; - }; - - power@e0070{ - compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc", - "fsl,p1022-pmc"; - reg = <0xe0070 0x20>; - etsec1_clk: soc-clk@B0{ - fsl,pmcdr-mask = <0x00000080>; - }; - etsec2_clk: soc-clk@B1{ - fsl,pmcdr-mask = <0x00000040>; - }; - etsec3_clk: soc-clk@B2{ - fsl,pmcdr-mask = <0x00000020>; - }; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,p1023-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,p1023-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; }; - localbus@ff605000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus"; + lbc: localbus@ff605000 { reg = <0 0xff605000 0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; /* NOR Flash, BCSR */ ranges = <0x0 0x0 0x0 0xee000000 0x02000000 @@ -428,34 +138,18 @@ }; pci0: pcie@ff60a000 { - compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; - cell-index = <1>; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xff60a000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0 0 7>; /* IRQ[0:3] are pulled up on board, set to active-low */ + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 + 0000 0 0 1 &mpic 0 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 >; ranges = <0x2000000 0x0 0xc0000000 0x2000000 0x0 0xc0000000 @@ -467,38 +161,22 @@ }; }; - pci1: pcie@ff609000 { - compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; - cell-index = <2>; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; + board_pci1: pci1: pcie@ff609000 { reg = <0 0xff609000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0 0 7>; /* * IRQ[4:6] only for PCIe, set to active-high, * IRQ[7] is pulled up on board, set to active-low */ + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 2 - 0000 0 0 2 &mpic 5 2 - 0000 0 0 3 &mpic 6 2 - 0000 0 0 4 &mpic 7 1 + 0000 0 0 1 &mpic 4 2 0 0 + 0000 0 0 2 &mpic 5 2 0 0 + 0000 0 0 3 &mpic 6 2 0 0 + 0000 0 0 4 &mpic 7 1 0 0 >; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 @@ -511,37 +189,21 @@ }; pci2: pcie@ff60b000 { - cell-index = <3>; - compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xff60b000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0 0 7>; /* * IRQ[8:10] are pulled up on board, set to active-low * IRQ[11] only for PCIe, set to active-high, */ + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 8 1 - 0000 0 0 2 &mpic 9 1 - 0000 0 0 3 &mpic 10 1 - 0000 0 0 4 &mpic 11 2 + 0000 0 0 1 &mpic 8 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 2 0 0 >; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 @@ -553,3 +215,5 @@ }; }; }; + +/include/ "fsl/p1023si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts index 66f03d6477b2..237310cc7e6c 100644 --- a/arch/powerpc/boot/dts/p2020ds.dts +++ b/arch/powerpc/boot/dts/p2020ds.dts @@ -9,30 +9,17 @@ * option) any later version. */ -/include/ "p2020si.dtsi" +/include/ "fsl/p2020si-pre.dtsi" / { model = "fsl,P2020DS"; compatible = "fsl,P2020DS"; - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - }; - - memory { device_type = "memory"; }; - localbus@ffe05000 { - compatible = "fsl,elbc", "simple-bus"; + board_lbc: lbc: localbus@ffe05000 { ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 0x1 0x0 0x0 0xe0000000 0x08000000 0x2 0x0 0x0 0xffa00000 0x00040000 @@ -40,203 +27,18 @@ 0x4 0x0 0x0 0xffa40000 0x00040000 0x5 0x0 0x0 0xffa80000 0x00040000 0x6 0x0 0x0 0xffac0000 0x00040000>; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x8000000>; - bank-width = <2>; - device-width = <1>; - - ramdisk@0 { - reg = <0x0 0x03000000>; - read-only; - }; - - diagnostic@3000000 { - reg = <0x03000000 0x00e00000>; - read-only; - }; - - dink@3e00000 { - reg = <0x03e00000 0x00200000>; - read-only; - }; - - kernel@4000000 { - reg = <0x04000000 0x00400000>; - read-only; - }; - - jffs2@4400000 { - reg = <0x04400000 0x03b00000>; - }; - - dtb@7f00000 { - reg = <0x07f00000 0x00080000>; - read-only; - }; - - u-boot@7f80000 { - reg = <0x07f80000 0x00080000>; - read-only; - }; - }; - - nand@2,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,elbc-fcm-nand"; - reg = <0x2 0x0 0x40000>; - - u-boot@0 { - reg = <0x0 0x02000000>; - read-only; - }; - - jffs2@2000000 { - reg = <0x02000000 0x10000000>; - }; - - ramdisk@12000000 { - reg = <0x12000000 0x08000000>; - read-only; - }; - - kernel@1a000000 { - reg = <0x1a000000 0x04000000>; - }; - - dtb@1e000000 { - reg = <0x1e000000 0x01000000>; - read-only; - }; - - empty@1f000000 { - reg = <0x1f000000 0x21000000>; - }; - }; - - board-control@3,0 { - compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis"; - reg = <0x3 0x0 0x30>; - }; - - nand@4,0 { - compatible = "fsl,elbc-fcm-nand"; - reg = <0x4 0x0 0x40000>; - }; - - nand@5,0 { - compatible = "fsl,elbc-fcm-nand"; - reg = <0x5 0x0 0x40000>; - }; - - nand@6,0 { - compatible = "fsl,elbc-fcm-nand"; - reg = <0x6 0x0 0x40000>; - }; + reg = <0 0xffe05000 0 0x1000>; }; - soc@ffe00000 { - - usb@22000 { - phy_type = "ulpi"; - }; - - mdio@24520 { - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x2>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - - }; - - mdio@25520 { - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26520 { - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - - }; - - ptp_clock@24E00 { - compatible = "fsl,etsec-ptp"; - reg = <0x24E00 0xB0>; - interrupts = <68 2 69 2 70 2>; - interrupt-parent = < &mpic >; - fsl,tclk-period = <5>; - fsl,tmr-prsc = <200>; - fsl,tmr-add = <0xCCCCCCCD>; - fsl,tmr-fiper1 = <0x3B9AC9FB>; - fsl,tmr-fiper2 = <0x0001869B>; - fsl,max-adj = <249999999>; - }; - - enet0: ethernet@24000 { - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - }; - - enet1: ethernet@25000 { - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - - }; - - enet2: ethernet@26000 { - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - phy-connection-type = "rgmii-id"; - }; - - - msi@41600 { - compatible = "fsl,mpic-msi"; - }; + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; }; - pci0: pcie@ffe08000 { + pci2: pcie@ffe08000 { ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x8 0x1 - 0000 0x0 0x0 0x2 &mpic 0x9 0x1 - 0000 0x0 0x0 0x3 &mpic 0xa 0x1 - 0000 0x0 0x0 0x4 &mpic 0xb 0x1 - >; + reg = <0 0xffe08000 0 0x1000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 @@ -247,61 +49,11 @@ }; }; - pci1: pcie@ffe09000 { + board_pci1: pci1: pcie@ffe09000 { ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - interrupt-map-mask = <0xff00 0x0 0x0 0x7>; - interrupt-map = < - - // IDSEL 0x11 func 0 - PCI slot 1 - 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 1 - PCI slot 1 - 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 2 - PCI slot 1 - 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 3 - PCI slot 1 - 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 4 - PCI slot 1 - 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 5 - PCI slot 1 - 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 6 - PCI slot 1 - 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 7 - PCI slot 1 - 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x1d Audio - 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 - - // IDSEL 0x1e Legacy - 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 - 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 - - // IDSEL 0x1f IDE/SATA - 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 - 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 - >; - + reg = <0 0xffe09000 0 0x1000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000 @@ -309,89 +61,14 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 0x0 0x10000>; - uli1575@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - isa@1e { - device_type = "isa"; - #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <0xf000 0x0 0x0 0x0 0x0>; - ranges = <0x1 0x0 0x1000000 0x0 0x0 - 0x1000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - reg = <0x1 0x20 0x2 - 0x1 0xa0 0x2 - 0x1 0x4d0 0x2>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <4 1>; - interrupt-parent = <&mpic>; - }; - - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <0x1 0x60 0x1 0x1 0x64 0x1>; - interrupts = <1 3 12 3>; - interrupt-parent = - <&i8259>; - - keyboard@0 { - reg = <0x0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <0x1>; - compatible = "pnpPNP,f03"; - }; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <0x1 0x70 0x2>; - }; - - gpio@400 { - reg = <0x1 0x400 0x80>; - }; - }; - }; }; - }; - pci2: pcie@ffe0a000 { + pci0: pcie@ffe0a000 { ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; + reg = <0 0xffe0a000 0 0x1000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xc0000000 0x2000000 0x0 0xc0000000 0x0 0x20000000 @@ -402,3 +79,11 @@ }; }; }; + +/* + * p2020ds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "fsl/p2020si-post.dtsi" +/include/ "p2020ds.dtsi" diff --git a/arch/powerpc/boot/dts/p2020ds.dtsi b/arch/powerpc/boot/dts/p2020ds.dtsi new file mode 100644 index 000000000000..c1cf6cef4dd6 --- /dev/null +++ b/arch/powerpc/boot/dts/p2020ds.dtsi @@ -0,0 +1,316 @@ +/* + * P2020DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + ramdisk@0 { + reg = <0x0 0x03000000>; + read-only; + }; + + diagnostic@3000000 { + reg = <0x03000000 0x00e00000>; + read-only; + }; + + dink@3e00000 { + reg = <0x03e00000 0x00200000>; + read-only; + }; + + kernel@4000000 { + reg = <0x04000000 0x00400000>; + read-only; + }; + + jffs2@4400000 { + reg = <0x04400000 0x03b00000>; + }; + + dtb@7f00000 { + reg = <0x07f00000 0x00080000>; + read-only; + }; + + u-boot@7f80000 { + reg = <0x07f80000 0x00080000>; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + u-boot@0 { + reg = <0x0 0x02000000>; + read-only; + }; + + jffs2@2000000 { + reg = <0x02000000 0x10000000>; + }; + + ramdisk@12000000 { + reg = <0x12000000 0x08000000>; + read-only; + }; + + kernel@1a000000 { + reg = <0x1a000000 0x04000000>; + }; + + dtb@1e000000 { + reg = <0x1e000000 0x01000000>; + read-only; + }; + + empty@1f000000 { + reg = <0x1f000000 0x21000000>; + }; + }; + + board-control@3,0 { + compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis"; + reg = <0x3 0x0 0x30>; + }; + + nand@4,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x4 0x0 0x40000>; + }; + + nand@5,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x5 0x0 0x40000>; + }; + + nand@6,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x6 0x0 0x40000>; + }; +}; + +&board_soc { + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <3 1 0 0>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xCCCCCCCD>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x0001869B>; + fsl,max-adj = <249999999>; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; +}; + +&board_pci1 { + pcie@0 { + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + + // IDSEL 0x11 func 0 - PCI slot 1 + 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 1 - PCI slot 1 + 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 2 - PCI slot 1 + 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 3 - PCI slot 1 + 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 4 - PCI slot 1 + 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 5 - PCI slot 1 + 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 6 - PCI slot 1 + 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 7 - PCI slot 1 + 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x1d Audio + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 + + // IDSEL 0x1e Legacy + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 + >; + + uli1575@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <4 1 0 0>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0x0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <0x1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + + gpio@400 { + reg = <0x1 0x400 0x80>; + }; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts index 1d7a05f3021e..26759a591712 100644 --- a/arch/powerpc/boot/dts/p2020rdb.dts +++ b/arch/powerpc/boot/dts/p2020rdb.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "p2020si.dtsi" +/include/ "fsl/p2020si-pre.dtsi" / { model = "fsl,P2020RDB"; @@ -29,7 +29,8 @@ device_type = "memory"; }; - localbus@ffe05000 { + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; /* NOR and NAND Flashes */ ranges = <0x0 0x0 0x0 0xef000000 0x01000000 @@ -140,7 +141,9 @@ }; - soc@ffe00000 { + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + i2c@3000 { rtc@68 { compatible = "dallas,ds1339"; @@ -148,17 +151,13 @@ }; }; - spi@7000 { - - fsl_m25p80@0 { + spi@7000 { + flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,espi-flash"; + compatible = "spansion,s25sl12801"; reg = <0>; - linux,modalias = "fsl_m25p80"; - modal = "s25sl128b"; spi-max-frequency = <50000000>; - mode = <0>; partition@0 { /* 512KB for u-boot Bootloader Image */ @@ -202,15 +201,17 @@ mdio@24520 { phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; + interrupts = <3 1 0 0>; reg = <0x0>; - }; + }; phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; + interrupts = <3 1 0 0>; reg = <0x1>; - }; + }; + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; }; mdio@25520 { @@ -224,11 +225,7 @@ status = "disabled"; }; - ptp_clock@24E00 { - compatible = "fsl,etsec-ptp"; - reg = <0x24E00 0xB0>; - interrupts = <68 2 69 2 70 2>; - interrupt-parent = < &mpic >; + ptp_clock@24e00 { fsl,tclk-period = <5>; fsl,tmr-prsc = <200>; fsl,tmr-add = <0xCCCCCCCD>; @@ -252,29 +249,18 @@ phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; }; - }; pci0: pcie@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; status = "disabled"; }; pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; + pcie@0 { ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000 @@ -286,21 +272,10 @@ }; pci2: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 @@ -311,3 +286,5 @@ }; }; }; + +/include/ "fsl/p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts index fc8ddddfccb6..66aac864c4cc 100644 --- a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts +++ b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts @@ -14,28 +14,16 @@ * option) any later version. */ -/include/ "p2020si.dtsi" +/include/ "p2020rdb.dts" / { model = "fsl,P2020RDB"; compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP"; - aliases { - ethernet1 = &enet1; - ethernet2 = &enet2; - serial0 = &serial0; - pci0 = &pci0; - }; - cpus { PowerPC,P2020@1 { - status = "disabled"; + status = "disabled"; }; - - }; - - memory { - device_type = "memory"; }; localbus@ffe05000 { @@ -43,115 +31,18 @@ }; soc@ffe00000 { - i2c@3000 { - rtc@68 { - compatible = "dallas,ds1339"; - reg = <0x68>; - }; - }; - serial1: serial@4600 { status = "disabled"; }; - spi@7000 { - - fsl_m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,espi-flash"; - reg = <0>; - linux,modalias = "fsl_m25p80"; - modal = "s25sl128b"; - spi-max-frequency = <50000000>; - mode = <0>; - - partition@0 { - /* 512KB for u-boot Bootloader Image */ - reg = <0x0 0x00080000>; - label = "SPI (RO) U-Boot Image"; - read-only; - }; - - partition@80000 { - /* 512KB for DTB Image */ - reg = <0x00080000 0x00080000>; - label = "SPI (RO) DTB Image"; - read-only; - }; - - partition@100000 { - /* 4MB for Linux Kernel Image */ - reg = <0x00100000 0x00400000>; - label = "SPI (RO) Linux Kernel Image"; - read-only; - }; - - partition@500000 { - /* 4MB for Compressed RFS Image */ - reg = <0x00500000 0x00400000>; - label = "SPI (RO) Compressed RFS Image"; - read-only; - }; - - partition@900000 { - /* 7MB for JFFS2 based RFS */ - reg = <0x00900000 0x00700000>; - label = "SPI (RW) JFFS2 RFS"; - }; - }; - }; - dma@c300 { status = "disabled"; }; - usb@22000 { - phy_type = "ulpi"; - }; - - mdio@24520 { - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x1>; - }; - }; - - mdio@25520 { - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26520 { - status = "disabled"; - }; - enet0: ethernet@24000 { status = "disabled"; }; - enet1: ethernet@25000 { - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "sgmii"; - - }; - - enet2: ethernet@26000 { - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - }; - - mpic: pic@40000 { protected-sources = < 42 76 77 78 79 /* serial1 , dma2 */ @@ -164,40 +55,12 @@ msi@41600 { status = "disabled"; }; - - }; pci0: pcie@ffe08000 { status = "disabled"; }; - pci1: pcie@ffe09000 { - ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - pci2: pcie@ffe0a000 { status = "disabled"; }; diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts index 261c34ba45ec..9bd8ef493dd2 100644 --- a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts +++ b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts @@ -15,28 +15,18 @@ * option) any later version. */ -/include/ "p2020si.dtsi" +/include/ "p2020rdb.dts" / { model = "fsl,P2020RDB"; compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP"; - aliases { - ethernet0 = &enet0; - serial0 = &serial1; - pci1 = &pci1; - }; - cpus { PowerPC,P2020@0 { - status = "disabled"; + status = "disabled"; }; }; - memory { - device_type = "memory"; - }; - localbus@ffe05000 { status = "disabled"; }; @@ -70,55 +60,10 @@ status = "disabled"; }; - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0xc300 0x4>; - ranges = <0x0 0xc100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <76 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <77 2>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <78 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <79 2>; - }; - }; - gpio: gpio-controller@f000 { status = "disabled"; }; - L2: l2-cache-controller@20000 { - compatible = "fsl,p2020-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2,512K - interrupt-parent = <&mpic>; - }; - dma@21300 { status = "disabled"; }; @@ -139,12 +84,6 @@ status = "disabled"; }; - enet0: ethernet@24000 { - fixed-link = <1 1 1000 0 0>; - phy-connection-type = "rgmii-id"; - - }; - enet1: ethernet@25000 { status = "disabled"; }; @@ -170,22 +109,6 @@ >; }; - msi@41600 { - compatible = "fsl,p2020-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - global-utilities@e0000 { //global utilities block status = "disabled"; }; @@ -199,30 +122,4 @@ pci1: pcie@ffe09000 { status = "disabled"; }; - - pci2: pcie@ffe0a000 { - ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; }; diff --git a/arch/powerpc/boot/dts/p2020si.dtsi b/arch/powerpc/boot/dts/p2020si.dtsi deleted file mode 100644 index 6def17f265d3..000000000000 --- a/arch/powerpc/boot/dts/p2020si.dtsi +++ /dev/null @@ -1,382 +0,0 @@ -/* - * P2020 Device Tree Source - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/dts-v1/; -/ { - compatible = "fsl,P2020"; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,P2020@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - - PowerPC,P2020@1 { - device_type = "cpu"; - reg = <0x1>; - next-level-cache = <&L2>; - }; - }; - - localbus@ffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus"; - reg = <0 0xffe05000 0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; - }; - - soc@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,p2020-immr", "simple-bus"; - ranges = <0x0 0x0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p2020-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,p2020-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - spi@7000 { - cell-index = <0>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2>; - interrupt-parent = <&mpic>; - mode = "cpu"; - }; - - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0xc300 0x4>; - ranges = <0x0 0xc100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <76 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <77 2>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <78 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <79 2>; - }; - }; - - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,mpc8572-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2>; - interrupt-parent = <&mpic>; - gpio-controller; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,p2020-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2,512K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - usb@22000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; - }; - - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x26520 0x20>; - }; - - mdio@26520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; - - }; - - enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - - }; - - sdhci@2e000 { - compatible = "fsl,p2020-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2>; - interrupt-parent = <&mpic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - - crypto@30000 { - compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", - "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xbfe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,p2020-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,p2020-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - }; - - pci0: pcie@ffe08000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe08000 0 0x1000>; - bus-range = <0 255>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; - }; - - pci1: pcie@ffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe09000 0 0x1000>; - bus-range = <0 255>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; - }; - - pci2: pcie@ffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe0a000 0 0x1000>; - bus-range = <0 255>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 2>; - }; -}; diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts index 79b6895027c0..4f957db01230 100644 --- a/arch/powerpc/boot/dts/p2041rdb.dts +++ b/arch/powerpc/boot/dts/p2041rdb.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "p2041si.dtsi" +/include/ "fsl/p2041si-pre.dtsi" / { model = "fsl,P2041RDB"; @@ -50,6 +50,8 @@ }; soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; spi@110000 { flash@0 { #address-cells = <1>; @@ -106,7 +108,18 @@ }; }; - localbus@ffe124000 { + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x1000>; ranges = <0 0 0xf 0xe8000000 0x08000000>; @@ -122,6 +135,7 @@ reg = <0xf 0xfe200000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + fsl,msi = <&msi0>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -137,6 +151,7 @@ reg = <0xf 0xfe201000 0 0x1000>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + fsl,msi = <&msi1>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -152,6 +167,7 @@ reg = <0xf 0xfe202000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + fsl,msi = <&msi2>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -163,3 +179,5 @@ }; }; }; + +/include/ "fsl/p2041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2041si.dtsi b/arch/powerpc/boot/dts/p2041si.dtsi deleted file mode 100644 index f7492edd0dfd..000000000000 --- a/arch/powerpc/boot/dts/p2041si.dtsi +++ /dev/null @@ -1,692 +0,0 @@ -/* - * P2041 Silicon Device Tree Source - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Freescale Semiconductor nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/dts-v1/; - -/ { - compatible = "fsl,P2041"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&mpic>; - - aliases { - ccsr = &soc; - dcsr = &dcsr; - - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - serial3 = &serial3; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - usb0 = &usb0; - usb1 = &usb1; - dma0 = &dma0; - dma1 = &dma1; - sdhc = &sdhc; - msi0 = &msi0; - msi1 = &msi1; - msi2 = &msi2; - - crypto = &crypto; - sec_jr0 = &sec_jr0; - sec_jr1 = &sec_jr1; - sec_jr2 = &sec_jr2; - sec_jr3 = &sec_jr3; - rtic_a = &rtic_a; - rtic_b = &rtic_b; - rtic_c = &rtic_c; - rtic_d = &rtic_d; - sec_mon = &sec_mon; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: PowerPC,e500mc@0 { - device_type = "cpu"; - reg = <0>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu1: PowerPC,e500mc@1 { - device_type = "cpu"; - reg = <1>; - next-level-cache = <&L2_1>; - L2_1: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu2: PowerPC,e500mc@2 { - device_type = "cpu"; - reg = <2>; - next-level-cache = <&L2_2>; - L2_2: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu3: PowerPC,e500mc@3 { - device_type = "cpu"; - reg = <3>; - next-level-cache = <&L2_3>; - L2_3: l2-cache { - next-level-cache = <&cpc>; - }; - }; - }; - - dcsr: dcsr@f00000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,dcsr", "simple-bus"; - - dcsr-epu@0 { - compatible = "fsl,dcsr-epu"; - interrupts = <52 2 0 0 - 84 2 0 0 - 85 2 0 0>; - interrupt-parent = <&mpic>; - reg = <0x0 0x1000>; - }; - dcsr-npc { - compatible = "fsl,dcsr-npc"; - reg = <0x1000 0x1000 0x1000000 0x8000>; - }; - dcsr-nxc@2000 { - compatible = "fsl,dcsr-nxc"; - reg = <0x2000 0x1000>; - }; - dcsr-corenet { - compatible = "fsl,dcsr-corenet"; - reg = <0x8000 0x1000 0xB0000 0x1000>; - }; - dcsr-dpaa@9000 { - compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa"; - reg = <0x9000 0x1000>; - }; - dcsr-ocn@11000 { - compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn"; - reg = <0x11000 0x1000>; - }; - dcsr-ddr@12000 { - compatible = "fsl,dcsr-ddr"; - dev-handle = <&ddr>; - reg = <0x12000 0x1000>; - }; - dcsr-nal@18000 { - compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal"; - reg = <0x18000 0x1000>; - }; - dcsr-rcpm@22000 { - compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm"; - reg = <0x22000 0x1000>; - }; - dcsr-cpu-sb-proxy@40000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu0>; - reg = <0x40000 0x1000>; - }; - dcsr-cpu-sb-proxy@41000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu1>; - reg = <0x41000 0x1000>; - }; - dcsr-cpu-sb-proxy@42000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu2>; - reg = <0x42000 0x1000>; - }; - dcsr-cpu-sb-proxy@43000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu3>; - reg = <0x43000 0x1000>; - }; - }; - - soc: soc@ffe000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x00000000 0xf 0xfe000000 0x1000000>; - reg = <0xf 0xfe000000 0 0x00001000>; - - soc-sram-error { - compatible = "fsl,soc-sram-error"; - interrupts = <16 2 1 29>; - }; - - corenet-law@0 { - compatible = "fsl,corenet-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <32>; - }; - - ddr: memory-controller@8000 { - compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; - reg = <0x8000 0x1000>; - interrupts = <16 2 1 23>; - }; - - cpc: l3-cache-controller@10000 { - compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; - reg = <0x10000 0x1000>; - interrupts = <16 2 1 27>; - }; - - corenet-cf@18000 { - compatible = "fsl,corenet-cf"; - reg = <0x18000 0x1000>; - interrupts = <16 2 1 31>; - fsl,ccf-num-csdids = <32>; - fsl,ccf-num-snoopids = <32>; - }; - - iommu@20000 { - compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x4000>; - interrupts = < - 24 2 0 0 - 16 2 1 30>; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <4>; - reg = <0x40000 0x40000>; - compatible = "fsl,mpic", "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi0: msi@41600 { - compatible = "fsl,mpic-msi"; - reg = <0x41600 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0>; - }; - - msi1: msi@41800 { - compatible = "fsl,mpic-msi"; - reg = <0x41800 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe8 0 0 0 - 0xe9 0 0 0 - 0xea 0 0 0 - 0xeb 0 0 0 - 0xec 0 0 0 - 0xed 0 0 0 - 0xee 0 0 0 - 0xef 0 0 0>; - }; - - msi2: msi@41a00 { - compatible = "fsl,mpic-msi"; - reg = <0x41a00 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xf0 0 0 0 - 0xf1 0 0 0 - 0xf2 0 0 0 - 0xf3 0 0 0 - 0xf4 0 0 0 - 0xf5 0 0 0 - 0xf6 0 0 0 - 0xf7 0 0 0>; - }; - - guts: global-utilities@e0000 { - compatible = "fsl,qoriq-device-config-1.0"; - reg = <0xe0000 0xe00>; - fsl,has-rstcr; - #sleep-cells = <1>; - fsl,liodn-bits = <12>; - }; - - pins: global-utilities@e0e00 { - compatible = "fsl,qoriq-pin-control-1.0"; - reg = <0xe0e00 0x200>; - #sleep-cells = <2>; - }; - - clockgen: global-utilities@e1000 { - compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0"; - reg = <0xe1000 0x1000>; - clock-frequency = <0>; - }; - - rcpm: global-utilities@e2000 { - compatible = "fsl,qoriq-rcpm-1.0"; - reg = <0xe2000 0x1000>; - #sleep-cells = <1>; - }; - - sfp: sfp@e8000 { - compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0"; - reg = <0xe8000 0x1000>; - }; - - serdes: serdes@ea000 { - compatible = "fsl,p2041-serdes"; - reg = <0xea000 0x1000>; - }; - - dma0: dma@100300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p2041-dma", "fsl,eloplus-dma"; - reg = <0x100300 0x4>; - ranges = <0x0 0x100100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,p2041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <28 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p2041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <29 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p2041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <30 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p2041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <31 2 0 0>; - }; - }; - - dma1: dma@101300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p2041-dma", "fsl,eloplus-dma"; - reg = <0x101300 0x4>; - ranges = <0x0 0x101100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,p2041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <32 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p2041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <33 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p2041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <34 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p2041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <35 2 0 0>; - }; - }; - - spi@110000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,p2041-espi", "fsl,mpc8536-espi"; - reg = <0x110000 0x1000>; - interrupts = <53 0x2 0 0>; - fsl,espi-num-chipselects = <4>; - }; - - sdhc: sdhc@114000 { - compatible = "fsl,p2041-esdhc", "fsl,esdhc"; - reg = <0x114000 0x1000>; - interrupts = <48 2 0 0>; - sdhci,auto-cmd12; - clock-frequency = <0>; - }; - - i2c@118000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x118000 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@118100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x118100 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@119000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <2>; - compatible = "fsl-i2c"; - reg = <0x119000 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - i2c@119100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <3>; - compatible = "fsl-i2c"; - reg = <0x119100 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - serial0: serial@11c500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c500 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial1: serial@11c600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c600 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial2: serial@11d500 { - cell-index = <2>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d500 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - serial3: serial@11d600 { - cell-index = <3>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d600 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - gpio0: gpio@130000 { - compatible = "fsl,p2041-gpio", "fsl,qoriq-gpio"; - reg = <0x130000 0x1000>; - interrupts = <55 2 0 0>; - #gpio-cells = <2>; - gpio-controller; - }; - - usb0: usb@210000 { - compatible = "fsl,p2041-usb2-mph", - "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - reg = <0x210000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <44 0x2 0 0>; - phy_type = "utmi"; - port0; - }; - - usb1: usb@211000 { - compatible = "fsl,p2041-usb2-dr", - "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - reg = <0x211000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <45 0x2 0 0>; - phy_type = "utmi"; - }; - - sata@220000 { - compatible = "fsl,p2041-sata", "fsl,pq-sata-v2"; - reg = <0x220000 0x1000>; - interrupts = <68 0x2 0 0>; - }; - - sata@221000 { - compatible = "fsl,p2041-sata", "fsl,pq-sata-v2"; - reg = <0x221000 0x1000>; - interrupts = <69 0x2 0 0>; - }; - - crypto: crypto@300000 { - compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x300000 0x10000>; - ranges = <0 0x300000 0x10000>; - interrupts = <92 2 0 0>; - - sec_jr0: jr@1000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupts = <88 2 0 0>; - }; - - sec_jr1: jr@2000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupts = <89 2 0 0>; - }; - - sec_jr2: jr@3000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupts = <90 2 0 0>; - }; - - sec_jr3: jr@4000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x4000 0x1000>; - interrupts = <91 2 0 0>; - }; - - rtic@6000 { - compatible = "fsl,sec-v4.2-rtic", - "fsl,sec-v4.0-rtic"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x6000 0x100>; - ranges = <0x0 0x6100 0xe00>; - - rtic_a: rtic-a@0 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x80>; - }; - - rtic_b: rtic-b@20 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x80>; - }; - - rtic_c: rtic-c@40 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x80>; - }; - - rtic_d: rtic-d@60 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x500 0x80>; - }; - }; - }; - - sec_mon: sec_mon@314000 { - compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon"; - reg = <0x314000 0x1000>; - interrupts = <93 2 0 0>; - }; - - }; - - localbus@ffe124000 { - compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus"; - interrupts = <25 2 0 0>; - #address-cells = <2>; - #size-cells = <1>; - }; - - pci0: pcie@ffe200000 { - compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <33333333>; - fsl,msi = <&msi0>; - interrupts = <16 2 1 15>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 15>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 40 1 0 0 - 0000 0 0 2 &mpic 1 1 0 0 - 0000 0 0 3 &mpic 2 1 0 0 - 0000 0 0 4 &mpic 3 1 0 0 - >; - }; - }; - - pci1: pcie@ffe201000 { - compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0 0xff>; - clock-frequency = <33333333>; - fsl,msi = <&msi1>; - interrupts = <16 2 1 14>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 14>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 41 1 0 0 - 0000 0 0 2 &mpic 5 1 0 0 - 0000 0 0 3 &mpic 6 1 0 0 - 0000 0 0 4 &mpic 7 1 0 0 - >; - }; - }; - - pci2: pcie@ffe202000 { - compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <33333333>; - fsl,msi = <&msi2>; - interrupts = <16 2 1 13>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 13>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 42 1 0 0 - 0000 0 0 2 &mpic 9 1 0 0 - 0000 0 0 3 &mpic 10 1 0 0 - 0000 0 0 4 &mpic 11 1 0 0 - >; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts index bbd113b49a8f..f469145abaeb 100644 --- a/arch/powerpc/boot/dts/p3041ds.dts +++ b/arch/powerpc/boot/dts/p3041ds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "p3041si.dtsi" +/include/ "fsl/p3041si-pre.dtsi" / { model = "fsl,P3041DS"; @@ -50,6 +50,8 @@ }; soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; spi@110000 { flash@0 { #address-cells = <1>; @@ -99,7 +101,18 @@ }; }; - localbus@ffe124000 { + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x1000>; ranges = <0 0 0xf 0xe8000000 0x08000000 2 0 0xf 0xffa00000 0x00040000 @@ -160,6 +173,7 @@ reg = <0xf 0xfe200000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + fsl,msi = <&msi0>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -175,6 +189,7 @@ reg = <0xf 0xfe201000 0 0x1000>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + fsl,msi = <&msi1>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -190,6 +205,7 @@ reg = <0xf 0xfe202000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + fsl,msi = <&msi2>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -205,6 +221,7 @@ reg = <0xf 0xfe203000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + fsl,msi = <&msi2>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -216,3 +233,5 @@ }; }; }; + +/include/ "fsl/p3041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p3041si.dtsi b/arch/powerpc/boot/dts/p3041si.dtsi deleted file mode 100644 index 87130b732bc7..000000000000 --- a/arch/powerpc/boot/dts/p3041si.dtsi +++ /dev/null @@ -1,729 +0,0 @@ -/* - * P3041 Silicon Device Tree Source - * - * Copyright 2010-2011 Freescale Semiconductor Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Freescale Semiconductor nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/dts-v1/; - -/ { - compatible = "fsl,P3041"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&mpic>; - - aliases { - ccsr = &soc; - dcsr = &dcsr; - - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - serial3 = &serial3; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - pci3 = &pci3; - usb0 = &usb0; - usb1 = &usb1; - dma0 = &dma0; - dma1 = &dma1; - sdhc = &sdhc; - msi0 = &msi0; - msi1 = &msi1; - msi2 = &msi2; - - crypto = &crypto; - sec_jr0 = &sec_jr0; - sec_jr1 = &sec_jr1; - sec_jr2 = &sec_jr2; - sec_jr3 = &sec_jr3; - rtic_a = &rtic_a; - rtic_b = &rtic_b; - rtic_c = &rtic_c; - rtic_d = &rtic_d; - sec_mon = &sec_mon; - -/* - rio0 = &rapidio0; - */ - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: PowerPC,e500mc@0 { - device_type = "cpu"; - reg = <0>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu1: PowerPC,e500mc@1 { - device_type = "cpu"; - reg = <1>; - next-level-cache = <&L2_1>; - L2_1: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu2: PowerPC,e500mc@2 { - device_type = "cpu"; - reg = <2>; - next-level-cache = <&L2_2>; - L2_2: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu3: PowerPC,e500mc@3 { - device_type = "cpu"; - reg = <3>; - next-level-cache = <&L2_3>; - L2_3: l2-cache { - next-level-cache = <&cpc>; - }; - }; - }; - - dcsr: dcsr@f00000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,dcsr", "simple-bus"; - - dcsr-epu@0 { - compatible = "fsl,dcsr-epu"; - interrupts = <52 2 0 0 - 84 2 0 0 - 85 2 0 0>; - interrupt-parent = <&mpic>; - reg = <0x0 0x1000>; - }; - dcsr-npc { - compatible = "fsl,dcsr-npc"; - reg = <0x1000 0x1000 0x1000000 0x8000>; - }; - dcsr-nxc@2000 { - compatible = "fsl,dcsr-nxc"; - reg = <0x2000 0x1000>; - }; - dcsr-corenet { - compatible = "fsl,dcsr-corenet"; - reg = <0x8000 0x1000 0xB0000 0x1000>; - }; - dcsr-dpaa@9000 { - compatible = "fsl,p43041-dcsr-dpaa", "fsl,dcsr-dpaa"; - reg = <0x9000 0x1000>; - }; - dcsr-ocn@11000 { - compatible = "fsl,p43041-dcsr-ocn", "fsl,dcsr-ocn"; - reg = <0x11000 0x1000>; - }; - dcsr-ddr@12000 { - compatible = "fsl,dcsr-ddr"; - dev-handle = <&ddr>; - reg = <0x12000 0x1000>; - }; - dcsr-nal@18000 { - compatible = "fsl,p43041-dcsr-nal", "fsl,dcsr-nal"; - reg = <0x18000 0x1000>; - }; - dcsr-rcpm@22000 { - compatible = "fsl,p43041-dcsr-rcpm", "fsl,dcsr-rcpm"; - reg = <0x22000 0x1000>; - }; - dcsr-cpu-sb-proxy@40000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu0>; - reg = <0x40000 0x1000>; - }; - dcsr-cpu-sb-proxy@41000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu1>; - reg = <0x41000 0x1000>; - }; - dcsr-cpu-sb-proxy@42000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu2>; - reg = <0x42000 0x1000>; - }; - dcsr-cpu-sb-proxy@43000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu3>; - reg = <0x43000 0x1000>; - }; - }; - - soc: soc@ffe000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x00000000 0xf 0xfe000000 0x1000000>; - reg = <0xf 0xfe000000 0 0x00001000>; - - soc-sram-error { - compatible = "fsl,soc-sram-error"; - interrupts = <16 2 1 29>; - }; - - corenet-law@0 { - compatible = "fsl,corenet-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <32>; - }; - - ddr: memory-controller@8000 { - compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; - reg = <0x8000 0x1000>; - interrupts = <16 2 1 23>; - }; - - cpc: l3-cache-controller@10000 { - compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; - reg = <0x10000 0x1000>; - interrupts = <16 2 1 27>; - }; - - corenet-cf@18000 { - compatible = "fsl,corenet-cf"; - reg = <0x18000 0x1000>; - interrupts = <16 2 1 31>; - fsl,ccf-num-csdids = <32>; - fsl,ccf-num-snoopids = <32>; - }; - - iommu@20000 { - compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x4000>; - interrupts = < - 24 2 0 0 - 16 2 1 30>; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <4>; - reg = <0x40000 0x40000>; - compatible = "fsl,mpic", "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi0: msi@41600 { - compatible = "fsl,mpic-msi"; - reg = <0x41600 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0>; - }; - - msi1: msi@41800 { - compatible = "fsl,mpic-msi"; - reg = <0x41800 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe8 0 0 0 - 0xe9 0 0 0 - 0xea 0 0 0 - 0xeb 0 0 0 - 0xec 0 0 0 - 0xed 0 0 0 - 0xee 0 0 0 - 0xef 0 0 0>; - }; - - msi2: msi@41a00 { - compatible = "fsl,mpic-msi"; - reg = <0x41a00 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xf0 0 0 0 - 0xf1 0 0 0 - 0xf2 0 0 0 - 0xf3 0 0 0 - 0xf4 0 0 0 - 0xf5 0 0 0 - 0xf6 0 0 0 - 0xf7 0 0 0>; - }; - - guts: global-utilities@e0000 { - compatible = "fsl,qoriq-device-config-1.0"; - reg = <0xe0000 0xe00>; - fsl,has-rstcr; - #sleep-cells = <1>; - fsl,liodn-bits = <12>; - }; - - pins: global-utilities@e0e00 { - compatible = "fsl,qoriq-pin-control-1.0"; - reg = <0xe0e00 0x200>; - #sleep-cells = <2>; - }; - - clockgen: global-utilities@e1000 { - compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0"; - reg = <0xe1000 0x1000>; - clock-frequency = <0>; - }; - - rcpm: global-utilities@e2000 { - compatible = "fsl,qoriq-rcpm-1.0"; - reg = <0xe2000 0x1000>; - #sleep-cells = <1>; - }; - - sfp: sfp@e8000 { - compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0"; - reg = <0xe8000 0x1000>; - }; - - serdes: serdes@ea000 { - compatible = "fsl,p3041-serdes"; - reg = <0xea000 0x1000>; - }; - - dma0: dma@100300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p3041-dma", "fsl,eloplus-dma"; - reg = <0x100300 0x4>; - ranges = <0x0 0x100100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <28 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <29 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <30 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <31 2 0 0>; - }; - }; - - dma1: dma@101300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p3041-dma", "fsl,eloplus-dma"; - reg = <0x101300 0x4>; - ranges = <0x0 0x101100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <32 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <33 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <34 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <35 2 0 0>; - }; - }; - - spi@110000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,p3041-espi", "fsl,mpc8536-espi"; - reg = <0x110000 0x1000>; - interrupts = <53 0x2 0 0>; - fsl,espi-num-chipselects = <4>; - }; - - sdhc: sdhc@114000 { - compatible = "fsl,p3041-esdhc", "fsl,esdhc"; - reg = <0x114000 0x1000>; - interrupts = <48 2 0 0>; - sdhci,auto-cmd12; - clock-frequency = <0>; - }; - - i2c@118000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x118000 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@118100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x118100 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@119000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <2>; - compatible = "fsl-i2c"; - reg = <0x119000 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - i2c@119100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <3>; - compatible = "fsl-i2c"; - reg = <0x119100 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - serial0: serial@11c500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c500 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial1: serial@11c600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c600 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial2: serial@11d500 { - cell-index = <2>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d500 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - serial3: serial@11d600 { - cell-index = <3>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d600 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - gpio0: gpio@130000 { - compatible = "fsl,p3041-gpio", "fsl,qoriq-gpio"; - reg = <0x130000 0x1000>; - interrupts = <55 2 0 0>; - #gpio-cells = <2>; - gpio-controller; - }; - - usb0: usb@210000 { - compatible = "fsl,p3041-usb2-mph", - "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - reg = <0x210000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <44 0x2 0 0>; - phy_type = "utmi"; - port0; - }; - - usb1: usb@211000 { - compatible = "fsl,p3041-usb2-dr", - "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - reg = <0x211000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <45 0x2 0 0>; - dr_mode = "host"; - phy_type = "utmi"; - }; - - sata@220000 { - compatible = "fsl,p3041-sata", "fsl,pq-sata-v2"; - reg = <0x220000 0x1000>; - interrupts = <68 0x2 0 0>; - }; - - sata@221000 { - compatible = "fsl,p3041-sata", "fsl,pq-sata-v2"; - reg = <0x221000 0x1000>; - interrupts = <69 0x2 0 0>; - }; - - crypto: crypto@300000 { - compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x300000 0x10000>; - ranges = <0 0x300000 0x10000>; - interrupts = <92 2 0 0>; - - sec_jr0: jr@1000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupts = <88 2 0 0>; - }; - - sec_jr1: jr@2000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupts = <89 2 0 0>; - }; - - sec_jr2: jr@3000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupts = <90 2 0 0>; - }; - - sec_jr3: jr@4000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x4000 0x1000>; - interrupts = <91 2 0 0>; - }; - - rtic@6000 { - compatible = "fsl,sec-v4.2-rtic", - "fsl,sec-v4.0-rtic"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x6000 0x100>; - ranges = <0x0 0x6100 0xe00>; - - rtic_a: rtic-a@0 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x80>; - }; - - rtic_b: rtic-b@20 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x80>; - }; - - rtic_c: rtic-c@40 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x80>; - }; - - rtic_d: rtic-d@60 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x500 0x80>; - }; - }; - }; - - sec_mon: sec_mon@314000 { - compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon"; - reg = <0x314000 0x1000>; - interrupts = <93 2 0 0>; - }; - }; - -/* - rapidio0: rapidio@ffe0c0000 -*/ - - localbus@ffe124000 { - compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus"; - interrupts = <25 2 0 0>; - #address-cells = <2>; - #size-cells = <1>; - }; - - pci0: pcie@ffe200000 { - compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi0>; - interrupts = <16 2 1 15>; - - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 15>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 40 1 0 0 - 0000 0 0 2 &mpic 1 1 0 0 - 0000 0 0 3 &mpic 2 1 0 0 - 0000 0 0 4 &mpic 3 1 0 0 - >; - }; - }; - - pci1: pcie@ffe201000 { - compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi1>; - interrupts = <16 2 1 14>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 14>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 41 1 0 0 - 0000 0 0 2 &mpic 5 1 0 0 - 0000 0 0 3 &mpic 6 1 0 0 - 0000 0 0 4 &mpic 7 1 0 0 - >; - }; - }; - - pci2: pcie@ffe202000 { - compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi2>; - interrupts = <16 2 1 13>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 13>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 42 1 0 0 - 0000 0 0 2 &mpic 9 1 0 0 - 0000 0 0 3 &mpic 10 1 0 0 - 0000 0 0 4 &mpic 11 1 0 0 - >; - }; - }; - - pci3: pcie@ffe203000 { - compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi2>; - interrupts = <16 2 1 12>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 12>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 43 1 0 0 - 0000 0 0 2 &mpic 0 1 0 0 - 0000 0 0 3 &mpic 4 1 0 0 - 0000 0 0 4 &mpic 8 1 0 0 - >; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/p3060qds.dts b/arch/powerpc/boot/dts/p3060qds.dts index 08b9193213e7..529042e4b9a2 100644 --- a/arch/powerpc/boot/dts/p3060qds.dts +++ b/arch/powerpc/boot/dts/p3060qds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "p3060si.dtsi" +/include/ "fsl/p3060si-pre.dtsi" / { model = "fsl,P3060QDS"; @@ -50,6 +50,8 @@ }; soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; spi@110000 { flash@0 { #address-cells = <1>; @@ -138,7 +140,7 @@ }; }; - rapidio@ffe0c0000 { + rio: rapidio@ffe0c0000 { reg = <0xf 0xfe0c0000 0 0x11000>; port1 { @@ -149,7 +151,7 @@ }; }; - localbus@ffe124000 { + lbc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x1000>; ranges = <0 0 0xf 0xe8000000 0x08000000 2 0 0xf 0xffa00000 0x00040000 @@ -210,6 +212,7 @@ reg = <0xf 0xfe200000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + fsl,msi = <&msi0>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -225,6 +228,7 @@ reg = <0xf 0xfe201000 0 0x1000>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + fsl,msi = <&msi1>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -236,3 +240,5 @@ }; }; }; + +/include/ "fsl/p3060si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p3060si.dtsi b/arch/powerpc/boot/dts/p3060si.dtsi deleted file mode 100644 index 68947e157bbc..000000000000 --- a/arch/powerpc/boot/dts/p3060si.dtsi +++ /dev/null @@ -1,719 +0,0 @@ -/* - * P3060 Silicon Device Tree Source - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Freescale Semiconductor nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/dts-v1/; - -/ { - compatible = "fsl,P3060"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&mpic>; - - aliases { - ccsr = &soc; - dcsr = &dcsr; - - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - serial3 = &serial3; - pci0 = &pci0; - pci1 = &pci1; - usb0 = &usb0; - usb1 = &usb1; - dma0 = &dma0; - dma1 = &dma1; - msi0 = &msi0; - msi1 = &msi1; - msi2 = &msi2; - - crypto = &crypto; - sec_jr0 = &sec_jr0; - sec_jr1 = &sec_jr1; - sec_jr2 = &sec_jr2; - sec_jr3 = &sec_jr3; - rtic_a = &rtic_a; - rtic_b = &rtic_b; - rtic_c = &rtic_c; - rtic_d = &rtic_d; - sec_mon = &sec_mon; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: PowerPC,e500mc@0 { - device_type = "cpu"; - reg = <0>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu1: PowerPC,e500mc@1 { - device_type = "cpu"; - reg = <1>; - next-level-cache = <&L2_1>; - L2_1: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu4: PowerPC,e500mc@4 { - device_type = "cpu"; - reg = <4>; - next-level-cache = <&L2_4>; - L2_4: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu5: PowerPC,e500mc@5 { - device_type = "cpu"; - reg = <5>; - next-level-cache = <&L2_5>; - L2_5: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu6: PowerPC,e500mc@6 { - device_type = "cpu"; - reg = <6>; - next-level-cache = <&L2_6>; - L2_6: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu7: PowerPC,e500mc@7 { - device_type = "cpu"; - reg = <7>; - next-level-cache = <&L2_7>; - L2_7: l2-cache { - next-level-cache = <&cpc>; - }; - }; - }; - - dcsr: dcsr@f00000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,dcsr", "simple-bus"; - - dcsr-epu@0 { - compatible = "fsl,dcsr-epu"; - interrupts = <52 2 0 0 - 84 2 0 0 - 85 2 0 0>; - interrupt-parent = <&mpic>; - reg = <0x0 0x1000>; - }; - dcsr-npc { - compatible = "fsl,dcsr-npc"; - reg = <0x1000 0x1000 0x1000000 0x8000>; - }; - dcsr-nxc@2000 { - compatible = "fsl,dcsr-nxc"; - reg = <0x2000 0x1000>; - }; - dcsr-corenet { - compatible = "fsl,dcsr-corenet"; - reg = <0x8000 0x1000 0xB0000 0x1000>; - }; - dcsr-dpaa@9000 { - compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa"; - reg = <0x9000 0x1000>; - }; - dcsr-ocn@11000 { - compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn"; - reg = <0x11000 0x1000>; - }; - dcsr-ddr@12000 { - compatible = "fsl,dcsr-ddr"; - dev-handle = <&ddr>; - reg = <0x12000 0x1000>; - }; - dcsr-nal@18000 { - compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal"; - reg = <0x18000 0x1000>; - }; - dcsr-rcpm@22000 { - compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm"; - reg = <0x22000 0x1000>; - }; - dcsr-cpu-sb-proxy@40000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu0>; - reg = <0x40000 0x1000>; - }; - dcsr-cpu-sb-proxy@41000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu1>; - reg = <0x41000 0x1000>; - }; - dcsr-cpu-sb-proxy@44000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu4>; - reg = <0x44000 0x1000>; - }; - dcsr-cpu-sb-proxy@45000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu5>; - reg = <0x45000 0x1000>; - }; - dcsr-cpu-sb-proxy@46000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu6>; - reg = <0x46000 0x1000>; - }; - dcsr-cpu-sb-proxy@47000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu7>; - reg = <0x47000 0x1000>; - }; - }; - - soc: soc@ffe000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x00000000 0xf 0xfe000000 0x1000000>; - reg = <0xf 0xfe000000 0 0x00001000>; - - soc-sram-error { - compatible = "fsl,soc-sram-error"; - interrupts = <16 2 1 29>; - }; - - corenet-law@0 { - compatible = "fsl,corenet-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <32>; - }; - - ddr: memory-controller@8000 { - compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller"; - reg = <0x8000 0x1000>; - interrupts = <16 2 1 23>; - }; - - cpc: l3-cache-controller@10000 { - compatible = "fsl,p3060-l3-cache-controller", "cache"; - reg = <0x10000 0x1000 - 0x11000 0x1000>; - interrupts = <16 2 1 27>; - }; - - corenet-cf@18000 { - compatible = "fsl,corenet-cf"; - reg = <0x18000 0x1000>; - interrupts = <16 2 1 31>; - fsl,ccf-num-csdids = <32>; - fsl,ccf-num-snoopids = <32>; - }; - - iommu@20000 { - compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x5000>; - interrupts = < - 24 2 0 0 - 16 2 1 30>; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <4>; - reg = <0x40000 0x40000>; - compatible = "fsl,mpic", "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi0: msi@41600 { - compatible = "fsl,mpic-msi"; - reg = <0x41600 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0>; - }; - - msi1: msi@41800 { - compatible = "fsl,mpic-msi"; - reg = <0x41800 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe8 0 0 0 - 0xe9 0 0 0 - 0xea 0 0 0 - 0xeb 0 0 0 - 0xec 0 0 0 - 0xed 0 0 0 - 0xee 0 0 0 - 0xef 0 0 0>; - }; - - msi2: msi@41a00 { - compatible = "fsl,mpic-msi"; - reg = <0x41a00 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xf0 0 0 0 - 0xf1 0 0 0 - 0xf2 0 0 0 - 0xf3 0 0 0 - 0xf4 0 0 0 - 0xf5 0 0 0 - 0xf6 0 0 0 - 0xf7 0 0 0>; - }; - - rmu: rmu@d3000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,srio-rmu"; - reg = <0xd3000 0x500>; - ranges = <0x0 0xd3000 0x500>; - - message-unit@0 { - compatible = "fsl,srio-msg-unit"; - reg = <0x0 0x100>; - interrupts = < - 60 2 0 0 /* msg1_tx_irq */ - 61 2 0 0>;/* msg1_rx_irq */ - }; - message-unit@100 { - compatible = "fsl,srio-msg-unit"; - reg = <0x100 0x100>; - interrupts = < - 62 2 0 0 /* msg2_tx_irq */ - 63 2 0 0>;/* msg2_rx_irq */ - }; - doorbell-unit@400 { - compatible = "fsl,srio-dbell-unit"; - reg = <0x400 0x80>; - interrupts = < - 56 2 0 0 /* bell_outb_irq */ - 57 2 0 0>;/* bell_inb_irq */ - }; - port-write-unit@4e0 { - compatible = "fsl,srio-port-write-unit"; - reg = <0x4e0 0x20>; - interrupts = <16 2 1 11>; - }; - }; - - guts: global-utilities@e0000 { - compatible = "fsl,qoriq-device-config-1.0"; - reg = <0xe0000 0xe00>; - fsl,has-rstcr; - #sleep-cells = <1>; - fsl,liodn-bits = <12>; - }; - - pins: global-utilities@e0e00 { - compatible = "fsl,qoriq-pin-control-1.0"; - reg = <0xe0e00 0x200>; - #sleep-cells = <2>; - }; - - clockgen: global-utilities@e1000 { - compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0"; - reg = <0xe1000 0x1000>; - clock-frequency = <0>; - }; - - rcpm: global-utilities@e2000 { - compatible = "fsl,qoriq-rcpm-1.0"; - reg = <0xe2000 0x1000>; - #sleep-cells = <1>; - }; - - sfp: sfp@e8000 { - compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0"; - reg = <0xe8000 0x1000>; - }; - - serdes: serdes@ea000 { - compatible = "fsl,p3060-serdes"; - reg = <0xea000 0x1000>; - }; - - dma0: dma@100300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p3060-dma", "fsl,eloplus-dma"; - reg = <0x100300 0x4>; - ranges = <0x0 0x100100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,p3060-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <28 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p3060-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <29 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p3060-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <30 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p3060-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <31 2 0 0>; - }; - }; - - dma1: dma@101300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p3060-dma", "fsl,eloplus-dma"; - reg = <0x101300 0x4>; - ranges = <0x0 0x101100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,p3060-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <32 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p3060-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <33 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p3060-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <34 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p3060-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <35 2 0 0>; - }; - }; - - spi@110000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,p3060-espi", "fsl,mpc8536-espi"; - reg = <0x110000 0x1000>; - interrupts = <53 0x2 0 0>; - fsl,espi-num-chipselects = <4>; - }; - - i2c@118000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x118000 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@118100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x118100 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@119000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <2>; - compatible = "fsl-i2c"; - reg = <0x119000 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - i2c@119100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <3>; - compatible = "fsl-i2c"; - reg = <0x119100 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - serial0: serial@11c500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c500 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial1: serial@11c600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c600 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial2: serial@11d500 { - cell-index = <2>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d500 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - serial3: serial@11d600 { - cell-index = <3>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d600 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - gpio0: gpio@130000 { - compatible = "fsl,p3060-gpio", "fsl,qoriq-gpio"; - reg = <0x130000 0x1000>; - interrupts = <55 2 0 0>; - #gpio-cells = <2>; - gpio-controller; - }; - - usb0: usb@210000 { - compatible = "fsl,p3060-usb2-mph", - "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - reg = <0x210000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <44 0x2 0 0>; - }; - - usb1: usb@211000 { - compatible = "fsl,p3060-usb2-dr", - "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - reg = <0x211000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <45 0x2 0 0>; - }; - - crypto: crypto@300000 { - compatible = "fsl,sec-v4.1", "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x300000 0x10000>; - ranges = <0 0x300000 0x10000>; - interrupt-parent = <&mpic>; - interrupts = <92 2 0 0>; - - sec_jr0: jr@1000 { - compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <88 2 0 0>; - }; - - sec_jr1: jr@2000 { - compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <89 2 0 0>; - }; - - sec_jr2: jr@3000 { - compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <90 2 0 0>; - }; - - sec_jr3: jr@4000 { - compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x4000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <91 2 0 0>; - }; - - rtic@6000 { - compatible = "fsl,sec-v4.1-rtic", "fsl,sec-v4.0-rtic"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x6000 0x100>; - ranges = <0x0 0x6100 0xe00>; - - rtic_a: rtic-a@0 { - compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x80>; - }; - - rtic_b: rtic-b@20 { - compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x80>; - }; - - rtic_c: rtic-c@40 { - compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x80>; - }; - - rtic_d: rtic-d@60 { - compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x500 0x80>; - }; - }; - }; - - sec_mon: sec_mon@314000 { - compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon"; - reg = <0x314000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <93 2 0 0>; - }; - }; - - rapidio@ffe0c0000 { - compatible = "fsl,srio"; - interrupts = <16 2 1 11>; - #address-cells = <2>; - #size-cells = <2>; - fsl,srio-rmu-handle = <&rmu>; - ranges; - - port1 { - #address-cells = <2>; - #size-cells = <2>; - cell-index = <1>; - }; - - port2 { - #address-cells = <2>; - #size-cells = <2>; - cell-index = <2>; - }; - }; - - localbus@ffe124000 { - compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus"; - interrupts = <25 2 0 0>; - #address-cells = <2>; - #size-cells = <1>; - }; - - pci0: pcie@ffe200000 { - compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <33333333>; - fsl,msi = <&msi0>; - interrupts = <16 2 1 15>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 15>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 40 1 0 0 - 0000 0 0 2 &mpic 1 1 0 0 - 0000 0 0 3 &mpic 2 1 0 0 - 0000 0 0 4 &mpic 3 1 0 0 - >; - }; - }; - - pci1: pcie@ffe201000 { - compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0 0xff>; - clock-frequency = <33333333>; - fsl,msi = <&msi1>; - interrupts = <16 2 1 14>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 14>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 41 1 0 0 - 0000 0 0 2 &mpic 5 1 0 0 - 0000 0 0 3 &mpic 6 1 0 0 - 0000 0 0 4 &mpic 7 1 0 0 - >; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts index c7916dc28014..6d60e54e50a0 100644 --- a/arch/powerpc/boot/dts/p4080ds.dts +++ b/arch/powerpc/boot/dts/p4080ds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "p4080si.dtsi" +/include/ "fsl/p4080si-pre.dtsi" / { model = "fsl,P4080DS"; @@ -50,6 +50,9 @@ }; soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { flash@0 { #address-cells = <1>; @@ -105,12 +108,18 @@ }; }; - rapidio0: rapidio@ffe0c0000 { - reg = <0xf 0xfe0c0000 0 0x20000>; - ranges = <0 0 0xc 0x20000000 0 0x01000000>; + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; }; - localbus@ffe124000 { + lbc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x1000>; ranges = <0 0 0xf 0xe8000000 0x08000000 3 0 0xf 0xffdf0000 0x00008000>; @@ -132,6 +141,7 @@ reg = <0xf 0xfe200000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + fsl,msi = <&msi0>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -147,6 +157,7 @@ reg = <0xf 0xfe201000 0 0x1000>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + fsl,msi = <&msi1>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -162,6 +173,7 @@ reg = <0xf 0xfe202000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + fsl,msi = <&msi2>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -174,3 +186,5 @@ }; }; + +/include/ "fsl/p4080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p4080si.dtsi b/arch/powerpc/boot/dts/p4080si.dtsi deleted file mode 100644 index f20c01ab2473..000000000000 --- a/arch/powerpc/boot/dts/p4080si.dtsi +++ /dev/null @@ -1,755 +0,0 @@ -/* - * P4080 Silicon Device Tree Source - * - * Copyright 2009-2011 Freescale Semiconductor Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Freescale Semiconductor nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/dts-v1/; - -/ { - compatible = "fsl,P4080"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&mpic>; - - aliases { - ccsr = &soc; - dcsr = &dcsr; - - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - serial3 = &serial3; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - usb0 = &usb0; - usb1 = &usb1; - dma0 = &dma0; - dma1 = &dma1; - sdhc = &sdhc; - msi0 = &msi0; - msi1 = &msi1; - msi2 = &msi2; - - crypto = &crypto; - sec_jr0 = &sec_jr0; - sec_jr1 = &sec_jr1; - sec_jr2 = &sec_jr2; - sec_jr3 = &sec_jr3; - rtic_a = &rtic_a; - rtic_b = &rtic_b; - rtic_c = &rtic_c; - rtic_d = &rtic_d; - sec_mon = &sec_mon; - - rio0 = &rapidio0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: PowerPC,e500mc@0 { - device_type = "cpu"; - reg = <0>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu1: PowerPC,e500mc@1 { - device_type = "cpu"; - reg = <1>; - next-level-cache = <&L2_1>; - L2_1: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu2: PowerPC,e500mc@2 { - device_type = "cpu"; - reg = <2>; - next-level-cache = <&L2_2>; - L2_2: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu3: PowerPC,e500mc@3 { - device_type = "cpu"; - reg = <3>; - next-level-cache = <&L2_3>; - L2_3: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu4: PowerPC,e500mc@4 { - device_type = "cpu"; - reg = <4>; - next-level-cache = <&L2_4>; - L2_4: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu5: PowerPC,e500mc@5 { - device_type = "cpu"; - reg = <5>; - next-level-cache = <&L2_5>; - L2_5: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu6: PowerPC,e500mc@6 { - device_type = "cpu"; - reg = <6>; - next-level-cache = <&L2_6>; - L2_6: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu7: PowerPC,e500mc@7 { - device_type = "cpu"; - reg = <7>; - next-level-cache = <&L2_7>; - L2_7: l2-cache { - next-level-cache = <&cpc>; - }; - }; - }; - - dcsr: dcsr@f00000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,dcsr", "simple-bus"; - - dcsr-epu@0 { - compatible = "fsl,dcsr-epu"; - interrupts = <52 2 0 0 - 84 2 0 0 - 85 2 0 0>; - interrupt-parent = <&mpic>; - reg = <0x0 0x1000>; - }; - dcsr-npc { - compatible = "fsl,dcsr-npc"; - reg = <0x1000 0x1000 0x1000000 0x8000>; - }; - dcsr-nxc@2000 { - compatible = "fsl,dcsr-nxc"; - reg = <0x2000 0x1000>; - }; - dcsr-corenet { - compatible = "fsl,dcsr-corenet"; - reg = <0x8000 0x1000 0xB0000 0x1000>; - }; - dcsr-dpaa@9000 { - compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa"; - reg = <0x9000 0x1000>; - }; - dcsr-ocn@11000 { - compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn"; - reg = <0x11000 0x1000>; - }; - dcsr-ddr@12000 { - compatible = "fsl,dcsr-ddr"; - dev-handle = <&ddr1>; - reg = <0x12000 0x1000>; - }; - dcsr-ddr@13000 { - compatible = "fsl,dcsr-ddr"; - dev-handle = <&ddr2>; - reg = <0x13000 0x1000>; - }; - dcsr-nal@18000 { - compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal"; - reg = <0x18000 0x1000>; - }; - dcsr-rcpm@22000 { - compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm"; - reg = <0x22000 0x1000>; - }; - dcsr-cpu-sb-proxy@40000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu0>; - reg = <0x40000 0x1000>; - }; - dcsr-cpu-sb-proxy@41000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu1>; - reg = <0x41000 0x1000>; - }; - dcsr-cpu-sb-proxy@42000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu2>; - reg = <0x42000 0x1000>; - }; - dcsr-cpu-sb-proxy@43000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu3>; - reg = <0x43000 0x1000>; - }; - dcsr-cpu-sb-proxy@44000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu4>; - reg = <0x44000 0x1000>; - }; - dcsr-cpu-sb-proxy@45000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu5>; - reg = <0x45000 0x1000>; - }; - dcsr-cpu-sb-proxy@46000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu6>; - reg = <0x46000 0x1000>; - }; - dcsr-cpu-sb-proxy@47000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu7>; - reg = <0x47000 0x1000>; - }; - }; - - soc: soc@ffe000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x00000000 0xf 0xfe000000 0x1000000>; - reg = <0xf 0xfe000000 0 0x00001000>; - - soc-sram-error { - compatible = "fsl,soc-sram-error"; - interrupts = <16 2 1 29>; - }; - - corenet-law@0 { - compatible = "fsl,corenet-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <32>; - }; - - ddr1: memory-controller@8000 { - compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller"; - reg = <0x8000 0x1000>; - interrupts = <16 2 1 23>; - }; - - ddr2: memory-controller@9000 { - compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller"; - reg = <0x9000 0x1000>; - interrupts = <16 2 1 22>; - }; - - cpc: l3-cache-controller@10000 { - compatible = "fsl,p4080-l3-cache-controller", "cache"; - reg = <0x10000 0x1000 - 0x11000 0x1000>; - interrupts = <16 2 1 27 - 16 2 1 26>; - }; - - corenet-cf@18000 { - compatible = "fsl,corenet-cf"; - reg = <0x18000 0x1000>; - interrupts = <16 2 1 31>; - fsl,ccf-num-csdids = <32>; - fsl,ccf-num-snoopids = <32>; - }; - - iommu@20000 { - compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x5000>; - interrupts = < - 24 2 0 0 - 16 2 1 30>; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <4>; - reg = <0x40000 0x40000>; - compatible = "fsl,mpic", "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi0: msi@41600 { - compatible = "fsl,mpic-msi"; - reg = <0x41600 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0>; - }; - - msi1: msi@41800 { - compatible = "fsl,mpic-msi"; - reg = <0x41800 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe8 0 0 0 - 0xe9 0 0 0 - 0xea 0 0 0 - 0xeb 0 0 0 - 0xec 0 0 0 - 0xed 0 0 0 - 0xee 0 0 0 - 0xef 0 0 0>; - }; - - msi2: msi@41a00 { - compatible = "fsl,mpic-msi"; - reg = <0x41a00 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xf0 0 0 0 - 0xf1 0 0 0 - 0xf2 0 0 0 - 0xf3 0 0 0 - 0xf4 0 0 0 - 0xf5 0 0 0 - 0xf6 0 0 0 - 0xf7 0 0 0>; - }; - - guts: global-utilities@e0000 { - compatible = "fsl,qoriq-device-config-1.0"; - reg = <0xe0000 0xe00>; - fsl,has-rstcr; - #sleep-cells = <1>; - fsl,liodn-bits = <12>; - }; - - pins: global-utilities@e0e00 { - compatible = "fsl,qoriq-pin-control-1.0"; - reg = <0xe0e00 0x200>; - #sleep-cells = <2>; - }; - - clockgen: global-utilities@e1000 { - compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0"; - reg = <0xe1000 0x1000>; - clock-frequency = <0>; - }; - - rcpm: global-utilities@e2000 { - compatible = "fsl,qoriq-rcpm-1.0"; - reg = <0xe2000 0x1000>; - #sleep-cells = <1>; - }; - - sfp: sfp@e8000 { - compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0"; - reg = <0xe8000 0x1000>; - }; - - serdes: serdes@ea000 { - compatible = "fsl,p4080-serdes"; - reg = <0xea000 0x1000>; - }; - - dma0: dma@100300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p4080-dma", "fsl,eloplus-dma"; - reg = <0x100300 0x4>; - ranges = <0x0 0x100100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <28 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <29 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <30 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <31 2 0 0>; - }; - }; - - dma1: dma@101300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p4080-dma", "fsl,eloplus-dma"; - reg = <0x101300 0x4>; - ranges = <0x0 0x101100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <32 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <33 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <34 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <35 2 0 0>; - }; - }; - - spi@110000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,p4080-espi", "fsl,mpc8536-espi"; - reg = <0x110000 0x1000>; - interrupts = <53 0x2 0 0>; - fsl,espi-num-chipselects = <4>; - }; - - sdhc: sdhc@114000 { - compatible = "fsl,p4080-esdhc", "fsl,esdhc"; - reg = <0x114000 0x1000>; - interrupts = <48 2 0 0>; - voltage-ranges = <3300 3300>; - sdhci,auto-cmd12; - clock-frequency = <0>; - }; - - i2c@118000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x118000 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@118100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x118100 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@119000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <2>; - compatible = "fsl-i2c"; - reg = <0x119000 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - i2c@119100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <3>; - compatible = "fsl-i2c"; - reg = <0x119100 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - serial0: serial@11c500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c500 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial1: serial@11c600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c600 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial2: serial@11d500 { - cell-index = <2>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d500 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - serial3: serial@11d600 { - cell-index = <3>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d600 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - gpio0: gpio@130000 { - compatible = "fsl,p4080-gpio", "fsl,qoriq-gpio"; - reg = <0x130000 0x1000>; - interrupts = <55 2 0 0>; - #gpio-cells = <2>; - gpio-controller; - }; - - usb0: usb@210000 { - compatible = "fsl,p4080-usb2-mph", - "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - reg = <0x210000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <44 0x2 0 0>; - }; - - usb1: usb@211000 { - compatible = "fsl,p4080-usb2-dr", - "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - reg = <0x211000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <45 0x2 0 0>; - }; - - crypto: crypto@300000 { - compatible = "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x300000 0x10000>; - ranges = <0 0x300000 0x10000>; - interrupt-parent = <&mpic>; - interrupts = <92 2 0 0>; - - sec_jr0: jr@1000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <88 2 0 0>; - }; - - sec_jr1: jr@2000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <89 2 0 0>; - }; - - sec_jr2: jr@3000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <90 2 0 0>; - }; - - sec_jr3: jr@4000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x4000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <91 2 0 0>; - }; - - rtic@6000 { - compatible = "fsl,sec-v4.0-rtic"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x6000 0x100>; - ranges = <0x0 0x6100 0xe00>; - - rtic_a: rtic-a@0 { - compatible = "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x80>; - }; - - rtic_b: rtic-b@20 { - compatible = "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x80>; - }; - - rtic_c: rtic-c@40 { - compatible = "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x80>; - }; - - rtic_d: rtic-d@60 { - compatible = "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x500 0x80>; - }; - }; - }; - - sec_mon: sec_mon@314000 { - compatible = "fsl,sec-v4.0-mon"; - reg = <0x314000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <93 2 0 0>; - }; - }; - - rapidio0: rapidio@ffe0c0000 { - #address-cells = <2>; - #size-cells = <2>; - compatible = "fsl,rapidio-delta"; - interrupts = < - 16 2 1 11 /* err_irq */ - 56 2 0 0 /* bell_outb_irq */ - 57 2 0 0 /* bell_inb_irq */ - 60 2 0 0 /* msg1_tx_irq */ - 61 2 0 0 /* msg1_rx_irq */ - 62 2 0 0 /* msg2_tx_irq */ - 63 2 0 0>; /* msg2_rx_irq */ - }; - - localbus@ffe124000 { - compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus"; - interrupts = <25 2 0 0>; - #address-cells = <2>; - #size-cells = <1>; - }; - - pci0: pcie@ffe200000 { - compatible = "fsl,p4080-pcie"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi0>; - interrupts = <16 2 1 15>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 15>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 40 1 0 0 - 0000 0 0 2 &mpic 1 1 0 0 - 0000 0 0 3 &mpic 2 1 0 0 - 0000 0 0 4 &mpic 3 1 0 0 - >; - }; - }; - - pci1: pcie@ffe201000 { - compatible = "fsl,p4080-pcie"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi1>; - interrupts = <16 2 1 14>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 14>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 41 1 0 0 - 0000 0 0 2 &mpic 5 1 0 0 - 0000 0 0 3 &mpic 6 1 0 0 - 0000 0 0 4 &mpic 7 1 0 0 - >; - }; - }; - - pci2: pcie@ffe202000 { - compatible = "fsl,p4080-pcie"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi2>; - interrupts = <16 2 1 13>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 13>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 42 1 0 0 - 0000 0 0 2 &mpic 9 1 0 0 - 0000 0 0 3 &mpic 10 1 0 0 - 0000 0 0 4 &mpic 11 1 0 0 - >; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts index e6d40999ccd7..1c250684c902 100644 --- a/arch/powerpc/boot/dts/p5020ds.dts +++ b/arch/powerpc/boot/dts/p5020ds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "p5020si.dtsi" +/include/ "fsl/p5020si-pre.dtsi" / { model = "fsl,P5020DS"; @@ -50,6 +50,8 @@ }; soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; spi@110000 { flash@0 { #address-cells = <1>; @@ -99,7 +101,18 @@ }; }; - localbus@ffe124000 { + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x1000>; ranges = <0 0 0xf 0xe8000000 0x08000000 2 0 0xf 0xffa00000 0x00040000 @@ -160,7 +173,7 @@ reg = <0xf 0xfe200000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; - + fsl,msi = <&msi0>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -176,6 +189,7 @@ reg = <0xf 0xfe201000 0 0x1000>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + fsl,msi = <&msi1>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -191,6 +205,7 @@ reg = <0xf 0xfe202000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + fsl,msi = <&msi2>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -206,6 +221,7 @@ reg = <0xf 0xfe203000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + fsl,msi = <&msi2>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -217,3 +233,5 @@ }; }; }; + +/include/ "fsl/p5020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p5020si.dtsi b/arch/powerpc/boot/dts/p5020si.dtsi deleted file mode 100644 index e7948ad71fa3..000000000000 --- a/arch/powerpc/boot/dts/p5020si.dtsi +++ /dev/null @@ -1,716 +0,0 @@ -/* - * P5020 Silicon Device Tree Source - * - * Copyright 2010-2011 Freescale Semiconductor Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Freescale Semiconductor nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/dts-v1/; - -/ { - compatible = "fsl,P5020"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&mpic>; - - aliases { - ccsr = &soc; - dcsr = &dcsr; - - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - serial3 = &serial3; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - pci3 = &pci3; - usb0 = &usb0; - usb1 = &usb1; - dma0 = &dma0; - dma1 = &dma1; - sdhc = &sdhc; - msi0 = &msi0; - msi1 = &msi1; - msi2 = &msi2; - - crypto = &crypto; - sec_jr0 = &sec_jr0; - sec_jr1 = &sec_jr1; - sec_jr2 = &sec_jr2; - sec_jr3 = &sec_jr3; - rtic_a = &rtic_a; - rtic_b = &rtic_b; - rtic_c = &rtic_c; - rtic_d = &rtic_d; - sec_mon = &sec_mon; - -/* - rio0 = &rapidio0; - */ - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: PowerPC,e5500@0 { - device_type = "cpu"; - reg = <0>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu1: PowerPC,e5500@1 { - device_type = "cpu"; - reg = <1>; - next-level-cache = <&L2_1>; - L2_1: l2-cache { - next-level-cache = <&cpc>; - }; - }; - }; - - dcsr: dcsr@f00000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,dcsr", "simple-bus"; - - dcsr-epu@0 { - compatible = "fsl,dcsr-epu"; - interrupts = <52 2 0 0 - 84 2 0 0 - 85 2 0 0>; - interrupt-parent = <&mpic>; - reg = <0x0 0x1000>; - }; - dcsr-npc { - compatible = "fsl,dcsr-npc"; - reg = <0x1000 0x1000 0x1000000 0x8000>; - }; - dcsr-nxc@2000 { - compatible = "fsl,dcsr-nxc"; - reg = <0x2000 0x1000>; - }; - dcsr-corenet { - compatible = "fsl,dcsr-corenet"; - reg = <0x8000 0x1000 0xB0000 0x1000>; - }; - dcsr-dpaa@9000 { - compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa"; - reg = <0x9000 0x1000>; - }; - dcsr-ocn@11000 { - compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn"; - reg = <0x11000 0x1000>; - }; - dcsr-ddr@12000 { - compatible = "fsl,dcsr-ddr"; - dev-handle = <&ddr1>; - reg = <0x12000 0x1000>; - }; - dcsr-ddr@13000 { - compatible = "fsl,dcsr-ddr"; - dev-handle = <&ddr2>; - reg = <0x13000 0x1000>; - }; - dcsr-nal@18000 { - compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal"; - reg = <0x18000 0x1000>; - }; - dcsr-rcpm@22000 { - compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm"; - reg = <0x22000 0x1000>; - }; - dcsr-cpu-sb-proxy@40000 { - compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu0>; - reg = <0x40000 0x1000>; - }; - dcsr-cpu-sb-proxy@41000 { - compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu1>; - reg = <0x41000 0x1000>; - }; - }; - - soc: soc@ffe000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x00000000 0xf 0xfe000000 0x1000000>; - reg = <0xf 0xfe000000 0 0x00001000>; - - soc-sram-error { - compatible = "fsl,soc-sram-error"; - interrupts = <16 2 1 29>; - }; - - corenet-law@0 { - compatible = "fsl,corenet-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <32>; - }; - - ddr1: memory-controller@8000 { - compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; - reg = <0x8000 0x1000>; - interrupts = <16 2 1 23>; - }; - - ddr2: memory-controller@9000 { - compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; - reg = <0x9000 0x1000>; - interrupts = <16 2 1 22>; - }; - - cpc: l3-cache-controller@10000 { - compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; - reg = <0x10000 0x1000 - 0x11000 0x1000>; - interrupts = <16 2 1 27 - 16 2 1 26>; - }; - - corenet-cf@18000 { - compatible = "fsl,corenet-cf"; - reg = <0x18000 0x1000>; - interrupts = <16 2 1 31>; - fsl,ccf-num-csdids = <32>; - fsl,ccf-num-snoopids = <32>; - }; - - iommu@20000 { - compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x4000>; - interrupts = < - 24 2 0 0 - 16 2 1 30>; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <4>; - reg = <0x40000 0x40000>; - compatible = "fsl,mpic", "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi0: msi@41600 { - compatible = "fsl,mpic-msi"; - reg = <0x41600 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0>; - }; - - msi1: msi@41800 { - compatible = "fsl,mpic-msi"; - reg = <0x41800 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe8 0 0 0 - 0xe9 0 0 0 - 0xea 0 0 0 - 0xeb 0 0 0 - 0xec 0 0 0 - 0xed 0 0 0 - 0xee 0 0 0 - 0xef 0 0 0>; - }; - - msi2: msi@41a00 { - compatible = "fsl,mpic-msi"; - reg = <0x41a00 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xf0 0 0 0 - 0xf1 0 0 0 - 0xf2 0 0 0 - 0xf3 0 0 0 - 0xf4 0 0 0 - 0xf5 0 0 0 - 0xf6 0 0 0 - 0xf7 0 0 0>; - }; - - guts: global-utilities@e0000 { - compatible = "fsl,qoriq-device-config-1.0"; - reg = <0xe0000 0xe00>; - fsl,has-rstcr; - #sleep-cells = <1>; - fsl,liodn-bits = <12>; - }; - - pins: global-utilities@e0e00 { - compatible = "fsl,qoriq-pin-control-1.0"; - reg = <0xe0e00 0x200>; - #sleep-cells = <2>; - }; - - clockgen: global-utilities@e1000 { - compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; - reg = <0xe1000 0x1000>; - clock-frequency = <0>; - }; - - rcpm: global-utilities@e2000 { - compatible = "fsl,qoriq-rcpm-1.0"; - reg = <0xe2000 0x1000>; - #sleep-cells = <1>; - }; - - sfp: sfp@e8000 { - compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0"; - reg = <0xe8000 0x1000>; - }; - - serdes: serdes@ea000 { - compatible = "fsl,p5020-serdes"; - reg = <0xea000 0x1000>; - }; - - dma0: dma@100300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p5020-dma", "fsl,eloplus-dma"; - reg = <0x100300 0x4>; - ranges = <0x0 0x100100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <28 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <29 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <30 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <31 2 0 0>; - }; - }; - - dma1: dma@101300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p5020-dma", "fsl,eloplus-dma"; - reg = <0x101300 0x4>; - ranges = <0x0 0x101100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <32 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <33 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <34 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <35 2 0 0>; - }; - }; - - spi@110000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,p5020-espi", "fsl,mpc8536-espi"; - reg = <0x110000 0x1000>; - interrupts = <53 0x2 0 0>; - fsl,espi-num-chipselects = <4>; - }; - - sdhc: sdhc@114000 { - compatible = "fsl,p5020-esdhc", "fsl,esdhc"; - reg = <0x114000 0x1000>; - interrupts = <48 2 0 0>; - sdhci,auto-cmd12; - clock-frequency = <0>; - }; - - i2c@118000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x118000 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@118100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x118100 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@119000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <2>; - compatible = "fsl-i2c"; - reg = <0x119000 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - i2c@119100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <3>; - compatible = "fsl-i2c"; - reg = <0x119100 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - serial0: serial@11c500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c500 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial1: serial@11c600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c600 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial2: serial@11d500 { - cell-index = <2>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d500 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - serial3: serial@11d600 { - cell-index = <3>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d600 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - gpio0: gpio@130000 { - compatible = "fsl,p5020-gpio", "fsl,qoriq-gpio"; - reg = <0x130000 0x1000>; - interrupts = <55 2 0 0>; - #gpio-cells = <2>; - gpio-controller; - }; - - usb0: usb@210000 { - compatible = "fsl,p5020-usb2-mph", - "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - reg = <0x210000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <44 0x2 0 0>; - phy_type = "utmi"; - port0; - }; - - usb1: usb@211000 { - compatible = "fsl,p5020-usb2-dr", - "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - reg = <0x211000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <45 0x2 0 0>; - dr_mode = "host"; - phy_type = "utmi"; - }; - - sata@220000 { - compatible = "fsl,p5020-sata", "fsl,pq-sata-v2"; - reg = <0x220000 0x1000>; - interrupts = <68 0x2 0 0>; - }; - - sata@221000 { - compatible = "fsl,p5020-sata", "fsl,pq-sata-v2"; - reg = <0x221000 0x1000>; - interrupts = <69 0x2 0 0>; - }; - - crypto: crypto@300000 { - compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x300000 0x10000>; - ranges = <0 0x300000 0x10000>; - interrupts = <92 2 0 0>; - - sec_jr0: jr@1000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupts = <88 2 0 0>; - }; - - sec_jr1: jr@2000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupts = <89 2 0 0>; - }; - - sec_jr2: jr@3000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupts = <90 2 0 0>; - }; - - sec_jr3: jr@4000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x4000 0x1000>; - interrupts = <91 2 0 0>; - }; - - rtic@6000 { - compatible = "fsl,sec-v4.2-rtic", - "fsl,sec-v4.0-rtic"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x6000 0x100>; - ranges = <0x0 0x6100 0xe00>; - - rtic_a: rtic-a@0 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x80>; - }; - - rtic_b: rtic-b@20 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x80>; - }; - - rtic_c: rtic-c@40 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x80>; - }; - - rtic_d: rtic-d@60 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x500 0x80>; - }; - }; - }; - - sec_mon: sec_mon@314000 { - compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon"; - reg = <0x314000 0x1000>; - interrupts = <93 2 0 0>; - }; - }; - -/* - rapidio0: rapidio@ffe0c0000 -*/ - - localbus@ffe124000 { - compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus"; - interrupts = <25 2 0 0>; - #address-cells = <2>; - #size-cells = <1>; - }; - - pci0: pcie@ffe200000 { - compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi0>; - interrupts = <16 2 1 15>; - - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 15>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 40 1 0 0 - 0000 0 0 2 &mpic 1 1 0 0 - 0000 0 0 3 &mpic 2 1 0 0 - 0000 0 0 4 &mpic 3 1 0 0 - >; - }; - }; - - pci1: pcie@ffe201000 { - compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi1>; - interrupts = <16 2 1 14>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 14>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 41 1 0 0 - 0000 0 0 2 &mpic 5 1 0 0 - 0000 0 0 3 &mpic 6 1 0 0 - 0000 0 0 4 &mpic 7 1 0 0 - >; - }; - }; - - pci2: pcie@ffe202000 { - compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi2>; - interrupts = <16 2 1 13>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 13>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 42 1 0 0 - 0000 0 0 2 &mpic 9 1 0 0 - 0000 0 0 3 &mpic 10 1 0 0 - 0000 0 0 4 &mpic 11 1 0 0 - >; - }; - }; - - pci3: pcie@ffe203000 { - compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi2>; - interrupts = <16 2 1 12>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 12>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 43 1 0 0 - 0000 0 0 2 &mpic 0 1 0 0 - 0000 0 0 3 &mpic 4 1 0 0 - 0000 0 0 4 &mpic 8 1 0 0 - >; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts index 0dc90f9bd814..b1e45a8537a5 100644 --- a/arch/powerpc/boot/dts/sbc8349.dts +++ b/arch/powerpc/boot/dts/sbc8349.dts @@ -222,7 +222,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -232,7 +232,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 94a332251710..77be77116c2e 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -316,7 +316,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <0x2a 0x2>; @@ -326,7 +326,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <0x2a 0x2>; diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts index ee5538feb455..56bebce87842 100644 --- a/arch/powerpc/boot/dts/sbc8641d.dts +++ b/arch/powerpc/boot/dts/sbc8641d.dts @@ -347,7 +347,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; @@ -357,7 +357,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <28 2>; diff --git a/arch/powerpc/boot/dts/socrates.dts b/arch/powerpc/boot/dts/socrates.dts index 38c35404bdc3..134a5ff917e1 100644 --- a/arch/powerpc/boot/dts/socrates.dts +++ b/arch/powerpc/boot/dts/socrates.dts @@ -199,7 +199,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; @@ -209,7 +209,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/storcenter.dts b/arch/powerpc/boot/dts/storcenter.dts index eab680ce10da..2a555738517e 100644 --- a/arch/powerpc/boot/dts/storcenter.dts +++ b/arch/powerpc/boot/dts/storcenter.dts @@ -74,7 +74,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x20>; clock-frequency = <97553800>; /* Hz */ current-speed = <115200>; @@ -85,7 +85,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x20>; clock-frequency = <97553800>; /* Hz */ current-speed = <9600>; diff --git a/arch/powerpc/boot/dts/stxssa8555.dts b/arch/powerpc/boot/dts/stxssa8555.dts index 49efd44057d7..4f166b01c1b6 100644 --- a/arch/powerpc/boot/dts/stxssa8555.dts +++ b/arch/powerpc/boot/dts/stxssa8555.dts @@ -210,7 +210,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; @@ -220,7 +220,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts index 0a4cedbdcb55..ed264d9ae356 100644 --- a/arch/powerpc/boot/dts/tqm8540.dts +++ b/arch/powerpc/boot/dts/tqm8540.dts @@ -250,7 +250,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; @@ -260,7 +260,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts index f49d09181312..925242115814 100644 --- a/arch/powerpc/boot/dts/tqm8541.dts +++ b/arch/powerpc/boot/dts/tqm8541.dts @@ -224,7 +224,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; @@ -234,7 +234,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts index d918752b1200..6e1ac50852a4 100644 --- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts +++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts @@ -305,7 +305,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? current-speed = <115200>; @@ -316,7 +316,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? current-speed = <115200>; diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts index 988d887c97fc..161e75eac7f7 100644 --- a/arch/powerpc/boot/dts/tqm8548.dts +++ b/arch/powerpc/boot/dts/tqm8548.dts @@ -305,7 +305,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? current-speed = <115200>; @@ -316,7 +316,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? current-speed = <115200>; diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts index 81bad8cd3756..aa6ff0d3dd9a 100644 --- a/arch/powerpc/boot/dts/tqm8555.dts +++ b/arch/powerpc/boot/dts/tqm8555.dts @@ -224,7 +224,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; @@ -234,7 +234,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/xcalibur1501.dts b/arch/powerpc/boot/dts/xcalibur1501.dts index ac0a617b4299..cc00f4ddd9a7 100644 --- a/arch/powerpc/boot/dts/xcalibur1501.dts +++ b/arch/powerpc/boot/dts/xcalibur1501.dts @@ -531,7 +531,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; @@ -542,7 +542,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/xpedite5200.dts b/arch/powerpc/boot/dts/xpedite5200.dts index c41a80c55e47..8fd7b7031357 100644 --- a/arch/powerpc/boot/dts/xpedite5200.dts +++ b/arch/powerpc/boot/dts/xpedite5200.dts @@ -333,7 +333,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; current-speed = <115200>; @@ -344,7 +344,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; current-speed = <115200>; diff --git a/arch/powerpc/boot/dts/xpedite5200_xmon.dts b/arch/powerpc/boot/dts/xpedite5200_xmon.dts index c0efcbb45137..0baa8283d08c 100644 --- a/arch/powerpc/boot/dts/xpedite5200_xmon.dts +++ b/arch/powerpc/boot/dts/xpedite5200_xmon.dts @@ -337,7 +337,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; current-speed = <9600>; @@ -348,7 +348,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; current-speed = <9600>; diff --git a/arch/powerpc/boot/dts/xpedite5301.dts b/arch/powerpc/boot/dts/xpedite5301.dts index db7faf5ebb39..53c1c6a9752f 100644 --- a/arch/powerpc/boot/dts/xpedite5301.dts +++ b/arch/powerpc/boot/dts/xpedite5301.dts @@ -441,7 +441,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; @@ -452,7 +452,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/xpedite5330.dts b/arch/powerpc/boot/dts/xpedite5330.dts index c364ca6ff7d0..215225983150 100644 --- a/arch/powerpc/boot/dts/xpedite5330.dts +++ b/arch/powerpc/boot/dts/xpedite5330.dts @@ -477,7 +477,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; @@ -488,7 +488,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/xpedite5370.dts b/arch/powerpc/boot/dts/xpedite5370.dts index 7a8a4afd56cf..11dbda10d756 100644 --- a/arch/powerpc/boot/dts/xpedite5370.dts +++ b/arch/powerpc/boot/dts/xpedite5370.dts @@ -439,7 +439,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; @@ -450,7 +450,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <42 2>; diff --git a/arch/powerpc/boot/treeboot-currituck.c b/arch/powerpc/boot/treeboot-currituck.c new file mode 100644 index 000000000000..925ae43b7467 --- /dev/null +++ b/arch/powerpc/boot/treeboot-currituck.c @@ -0,0 +1,119 @@ +/* + * Copyright © 2011 Tony Breeds IBM Corporation + * + * Based on earlier code: + * Copyright (C) Paul Mackerras 1997. + * + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * Copyright (c) 2003, 2004 Zultys Technologies + * + * Copyright 2007 David Gibson, IBM Corporation. + * Copyright 2010 Ben. Herrenschmidt, IBM Corporation. + * Copyright © 2011 David Kleikamp IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <stdarg.h> +#include <stddef.h> +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "reg.h" +#include "io.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" +#include "libfdt.h" + +BSS_STACK(4096); + +#define MAX_RANKS 0x4 +#define DDR3_MR0CF 0x80010011U + +static unsigned long long ibm_currituck_memsize; +static unsigned long long ibm_currituck_detect_memsize(void) +{ + u32 reg; + unsigned i; + unsigned long long memsize = 0; + + for(i = 0; i < MAX_RANKS; i++){ + reg = mfdcrx(DDR3_MR0CF + i); + + if (!(reg & 1)) + continue; + + reg &= 0x0000f000; + reg >>= 12; + memsize += (0x800000ULL << reg); + } + + return memsize; +} + +static void ibm_currituck_fixups(void) +{ + void *devp = finddevice("/"); + u32 dma_ranges[7]; + + dt_fixup_memory(0x0ULL, ibm_currituck_memsize); + + while ((devp = find_node_by_devtype(devp, "pci"))) { + if (getprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges)) < 0) { + printf("%s: Failed to get dma-ranges\r\n", __func__); + continue; + } + + dma_ranges[5] = ibm_currituck_memsize >> 32; + dma_ranges[6] = ibm_currituck_memsize & 0xffffffffUL; + + setprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges)); + } +} + +#define SPRN_PIR 0x11E /* Processor Indentification Register */ +void platform_init(void) +{ + unsigned long end_of_ram, avail_ram; + u32 pir_reg; + int node, size; + const u32 *timebase; + + ibm_currituck_memsize = ibm_currituck_detect_memsize(); + if (ibm_currituck_memsize >> 32) + end_of_ram = ~0UL; + else + end_of_ram = ibm_currituck_memsize; + avail_ram = end_of_ram - (unsigned long)_end; + + simple_alloc_init(_end, avail_ram, 128, 64); + platform_ops.fixups = ibm_currituck_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + pir_reg = mfspr(SPRN_PIR); + + /* Make sure FDT blob is sane */ + if (fdt_check_header(_dtb_start) != 0) + fatal("Invalid device tree blob\n"); + + node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type", + "cpu", sizeof("cpu")); + if (!node) + fatal("Cannot find cpu node\n"); + timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size); + if (timebase && (size == 4)) + timebase_period_ns = 1000000000 / *timebase; + + fdt_set_boot_cpuid_phys(_dtb_start, pir_reg); + fdt_init(_dtb_start); + + serial_console_init(); +} diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index c74531af72c0..f090e6d2907e 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -163,7 +163,7 @@ coff) link_address='0x500000' pie= ;; -miboot|uboot) +miboot|uboot*) # miboot and U-boot want just the bare bits, not an ELF binary ext=bin objflags="-O binary" @@ -244,6 +244,9 @@ gamecube|wii) link_address='0x600000' platformo="$object/$platform-head.o $object/$platform.o" ;; +treeboot-currituck) + link_address='0x1000000' + ;; treeboot-iss4xx-mpic) platformo="$object/treeboot-iss4xx.o" ;; @@ -257,6 +260,8 @@ vmz="$tmpdir/`basename \"$kernel\"`.$ext" if [ -z "$cacheit" -o ! -f "$vmz$gzip" -o "$vmz$gzip" -ot "$kernel" ]; then ${CROSS}objcopy $objflags "$kernel" "$vmz.$$" + strip_size=$(stat -c %s $vmz.$$) + if [ -n "$gzip" ]; then gzip -n -f -9 "$vmz.$$" fi @@ -266,6 +271,24 @@ if [ -z "$cacheit" -o ! -f "$vmz$gzip" -o "$vmz$gzip" -ot "$kernel" ]; then else vmz="$vmz.$$" fi +else + # Calculate the vmlinux.strip size + ${CROSS}objcopy $objflags "$kernel" "$vmz.$$" + strip_size=$(stat -c %s $vmz.$$) + rm -f $vmz.$$ +fi + +# Round the size to next higher MB limit +round_size=$(((strip_size + 0xfffff) & 0xfff00000)) + +round_size=0x$(printf "%x" $round_size) +link_addr=$(printf "%d" $link_address) + +if [ $link_addr -lt $strip_size ]; then + echo "INFO: Uncompressed kernel (size 0x$(printf "%x\n" $strip_size))" \ + "overlaps the address of the wrapper($link_address)" + echo "INFO: Fixing the link_address of wrapper to ($round_size)" + link_address=$round_size fi vmz="$vmz$gzip" @@ -291,6 +314,26 @@ uboot) fi exit 0 ;; +uboot-obs600) + rm -f "$ofile" + # obs600 wants a multi image with an initrd, so we need to put a fake + # one in even when building a "normal" image. + if [ -n "$initrd" ]; then + real_rd="$initrd" + else + real_rd=`mktemp` + echo "\0" >>"$real_rd" + fi + ${MKIMAGE} -A ppc -O linux -T multi -C gzip -a $membase -e $membase \ + $uboot_version -d "$vmz":"$real_rd":"$dtb" "$ofile" + if [ -z "$initrd" ]; then + rm -f "$real_rd" + fi + if [ -z "$cacheit" ]; then + rm -f "$vmz" + fi + exit 0 + ;; esac addsec() { |