aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kernel')
-rw-r--r--arch/powerpc/kernel/Makefile2
-rw-r--r--arch/powerpc/kernel/cpu_setup_power.S (renamed from arch/powerpc/kernel/cpu_setup_power7.S)32
-rw-r--r--arch/powerpc/kernel/cputable.c38
-rw-r--r--arch/powerpc/kernel/entry_64.S2
-rw-r--r--arch/powerpc/kernel/exceptions-64s.S308
-rw-r--r--arch/powerpc/kernel/head_64.S6
-rw-r--r--arch/powerpc/kernel/idle.c3
-rw-r--r--arch/powerpc/kernel/iommu.c16
-rw-r--r--arch/powerpc/kernel/machine_kexec.c14
-rw-r--r--arch/powerpc/kernel/machine_kexec_64.c8
-rw-r--r--arch/powerpc/kernel/pci_32.c2
-rw-r--r--arch/powerpc/kernel/prom.c7
-rw-r--r--arch/powerpc/kernel/prom_init.c11
-rw-r--r--arch/powerpc/kernel/ptrace.c90
-rw-r--r--arch/powerpc/kernel/rtas.c1
-rw-r--r--arch/powerpc/kernel/rtas_flash.c4
-rw-r--r--arch/powerpc/kernel/setup_64.c5
-rw-r--r--arch/powerpc/kernel/udbg.c23
18 files changed, 451 insertions, 121 deletions
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index cde12f8a4ebc..8f619342f14c 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -38,7 +38,7 @@ obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \
paca.o nvram_64.o firmware.o
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
-obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power7.o
+obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power.o
obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o
obj-$(CONFIG_PPC_A2) += cpu_setup_a2.o
diff --git a/arch/powerpc/kernel/cpu_setup_power7.S b/arch/powerpc/kernel/cpu_setup_power.S
index 76797c5105d6..57cf14065aec 100644
--- a/arch/powerpc/kernel/cpu_setup_power7.S
+++ b/arch/powerpc/kernel/cpu_setup_power.S
@@ -27,6 +27,7 @@ _GLOBAL(__setup_cpu_power7)
beqlr
li r0,0
mtspr SPRN_LPID,r0
+ mfspr r3,SPRN_LPCR
bl __init_LPCR
bl __init_TLB
mtlr r11
@@ -39,6 +40,35 @@ _GLOBAL(__restore_cpu_power7)
beqlr
li r0,0
mtspr SPRN_LPID,r0
+ mfspr r3,SPRN_LPCR
+ bl __init_LPCR
+ bl __init_TLB
+ mtlr r11
+ blr
+
+_GLOBAL(__setup_cpu_power8)
+ mflr r11
+ bl __init_hvmode_206
+ mtlr r11
+ beqlr
+ li r0,0
+ mtspr SPRN_LPID,r0
+ mfspr r3,SPRN_LPCR
+ oris r3, r3, LPCR_AIL_3@h
+ bl __init_LPCR
+ bl __init_TLB
+ mtlr r11
+ blr
+
+_GLOBAL(__restore_cpu_power8)
+ mflr r11
+ mfmsr r3
+ rldicl. r0,r3,4,63
+ beqlr
+ li r0,0
+ mtspr SPRN_LPID,r0
+ mfspr r3,SPRN_LPCR
+ oris r3, r3, LPCR_AIL_3@h
bl __init_LPCR
bl __init_TLB
mtlr r11
@@ -57,6 +87,7 @@ __init_hvmode_206:
__init_LPCR:
/* Setup a sane LPCR:
+ * Called with initial LPCR in R3
*
* LPES = 0b01 (HSRR0/1 used for 0x500)
* PECE = 0b111
@@ -67,7 +98,6 @@ __init_LPCR:
*
* Other bits untouched for now
*/
- mfspr r3,SPRN_LPCR
li r5,1
rldimi r3,r5, LPCR_LPES_SH, 64-LPCR_LPES_SH-2
ori r3,r3,(LPCR_PECE0|LPCR_PECE1|LPCR_PECE2)
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 0514c21f138b..75a3d71b895d 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -68,6 +68,8 @@ extern void __restore_cpu_pa6t(void);
extern void __restore_cpu_ppc970(void);
extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec);
extern void __restore_cpu_power7(void);
+extern void __setup_cpu_power8(unsigned long offset, struct cpu_spec* spec);
+extern void __restore_cpu_power8(void);
extern void __restore_cpu_a2(void);
#endif /* CONFIG_PPC64 */
#if defined(CONFIG_E500)
@@ -94,6 +96,10 @@ extern void __restore_cpu_e5500(void);
PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \
PPC_FEATURE_TRUE_LE | \
PPC_FEATURE_PSERIES_PERFMON_COMPAT)
+#define COMMON_USER_POWER8 (COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_06 |\
+ PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \
+ PPC_FEATURE_TRUE_LE | \
+ PPC_FEATURE_PSERIES_PERFMON_COMPAT)
#define COMMON_USER_PA6T (COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\
PPC_FEATURE_TRUE_LE | \
PPC_FEATURE_HAS_ALTIVEC_COMP)
@@ -429,6 +435,21 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_restore = __restore_cpu_power7,
.platform = "power7",
},
+ { /* 2.07-compliant processor, i.e. Power8 "architected" mode */
+ .pvr_mask = 0xffffffff,
+ .pvr_value = 0x0f000004,
+ .cpu_name = "POWER8 (architected)",
+ .cpu_features = CPU_FTRS_POWER8,
+ .cpu_user_features = COMMON_USER_POWER8,
+ .mmu_features = MMU_FTRS_POWER8,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .oprofile_type = PPC_OPROFILE_POWER4,
+ .oprofile_cpu_type = "ppc64/ibm-compat-v1",
+ .cpu_setup = __setup_cpu_power8,
+ .cpu_restore = __restore_cpu_power8,
+ .platform = "power8",
+ },
{ /* Power7 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x003f0000,
@@ -463,6 +484,23 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_restore = __restore_cpu_power7,
.platform = "power7+",
},
+ { /* Power8 */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x004b0000,
+ .cpu_name = "POWER8 (raw)",
+ .cpu_features = CPU_FTRS_POWER8,
+ .cpu_user_features = COMMON_USER_POWER8,
+ .mmu_features = MMU_FTRS_POWER8,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .num_pmcs = 6,
+ .pmc_type = PPC_PMC_IBM,
+ .oprofile_cpu_type = "ppc64/power8",
+ .oprofile_type = PPC_OPROFILE_POWER4,
+ .cpu_setup = __setup_cpu_power8,
+ .cpu_restore = __restore_cpu_power8,
+ .platform = "power8",
+ },
{ /* Cell Broadband Engine */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00700000,
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index e9a906c27234..b310a0573625 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -373,6 +373,8 @@ _GLOBAL(ret_from_fork)
_GLOBAL(ret_from_kernel_thread)
bl .schedule_tail
REST_NVGPRS(r1)
+ li r3,0
+ std r3,0(r1)
ld r14, 0(r14)
mtlr r14
mr r3,r15
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 10b658ad65e1..4665e82fa377 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -19,12 +19,76 @@
/*
* We layout physical memory as follows:
* 0x0000 - 0x00ff : Secondary processor spin code
- * 0x0100 - 0x2fff : pSeries Interrupt prologs
- * 0x3000 - 0x5fff : interrupt support common interrupt prologs
- * 0x6000 - 0x6fff : Initial (CPU0) segment table
+ * 0x0100 - 0x17ff : pSeries Interrupt prologs
+ * 0x1800 - 0x4000 : interrupt support common interrupt prologs
+ * 0x4000 - 0x5fff : pSeries interrupts with IR=1,DR=1
+ * 0x6000 - 0x6fff : more interrupt support including for IR=1,DR=1
* 0x7000 - 0x7fff : FWNMI data area
- * 0x8000 - : Early init and support code
+ * 0x8000 - 0x8fff : Initial (CPU0) segment table
+ * 0x9000 - : Early init and support code
*/
+ /* Syscall routine is used twice, in reloc-off and reloc-on paths */
+#define SYSCALL_PSERIES_1 \
+BEGIN_FTR_SECTION \
+ cmpdi r0,0x1ebe ; \
+ beq- 1f ; \
+END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) \
+ mr r9,r13 ; \
+ GET_PACA(r13) ; \
+ mfspr r11,SPRN_SRR0 ; \
+0:
+
+#define SYSCALL_PSERIES_2_RFID \
+ mfspr r12,SPRN_SRR1 ; \
+ ld r10,PACAKBASE(r13) ; \
+ LOAD_HANDLER(r10, system_call_entry) ; \
+ mtspr SPRN_SRR0,r10 ; \
+ ld r10,PACAKMSR(r13) ; \
+ mtspr SPRN_SRR1,r10 ; \
+ rfid ; \
+ b . ; /* prevent speculative execution */
+
+#define SYSCALL_PSERIES_3 \
+ /* Fast LE/BE switch system call */ \
+1: mfspr r12,SPRN_SRR1 ; \
+ xori r12,r12,MSR_LE ; \
+ mtspr SPRN_SRR1,r12 ; \
+ rfid ; /* return to userspace */ \
+ b . ; \
+2: mfspr r12,SPRN_SRR1 ; \
+ andi. r12,r12,MSR_PR ; \
+ bne 0b ; \
+ mtspr SPRN_SRR0,r3 ; \
+ mtspr SPRN_SRR1,r4 ; \
+ mtspr SPRN_SDR1,r5 ; \
+ rfid ; \
+ b . ; /* prevent speculative execution */
+
+#if defined(CONFIG_RELOCATABLE)
+ /*
+ * We can't branch directly; in the direct case we use LR
+ * and system_call_entry restores LR. (We thus need to move
+ * LR to r10 in the RFID case too.)
+ */
+#define SYSCALL_PSERIES_2_DIRECT \
+ mflr r10 ; \
+ ld r12,PACAKBASE(r13) ; \
+ LOAD_HANDLER(r12, system_call_entry_direct) ; \
+ mtlr r12 ; \
+ mfspr r12,SPRN_SRR1 ; \
+ /* Re-use of r13... No spare regs to do this */ \
+ li r13,MSR_RI ; \
+ mtmsrd r13,1 ; \
+ GET_PACA(r13) ; /* get r13 back */ \
+ blr ;
+#else
+ /* We can branch directly */
+#define SYSCALL_PSERIES_2_DIRECT \
+ mfspr r12,SPRN_SRR1 ; \
+ li r10,MSR_RI ; \
+ mtmsrd r10,1 ; /* Set RI (EE=0) */ \
+ b system_call_entry_direct ;
+#endif
/*
* This is the start of the interrupt handlers for pSeries
@@ -207,31 +271,11 @@ system_call_pSeries:
KVMTEST(0xc00)
GET_SCRATCH0(r13)
#endif
-BEGIN_FTR_SECTION
- cmpdi r0,0x1ebe
- beq- 1f
-END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
- mr r9,r13
- GET_PACA(r13)
- mfspr r11,SPRN_SRR0
- mfspr r12,SPRN_SRR1
- ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10, system_call_entry)
- mtspr SPRN_SRR0,r10
- ld r10,PACAKMSR(r13)
- mtspr SPRN_SRR1,r10
- rfid
- b . /* prevent speculative execution */
-
+ SYSCALL_PSERIES_1
+ SYSCALL_PSERIES_2_RFID
+ SYSCALL_PSERIES_3
KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xc00)
-/* Fast LE/BE switch system call */
-1: mfspr r12,SPRN_SRR1
- xori r12,r12,MSR_LE
- mtspr SPRN_SRR1,r12
- rfid /* return to userspace */
- b .
-
STD_EXCEPTION_PSERIES(0xd00, 0xd00, single_step)
KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xd00)
@@ -276,7 +320,7 @@ vsx_unavailable_pSeries_1:
KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_STD, 0x1300)
. = 0x1500
- .global denorm_Hypervisor
+ .global denorm_exception_hv
denorm_exception_hv:
HMT_MEDIUM
mtspr SPRN_SPRG_HSCRATCH0,r13
@@ -311,12 +355,14 @@ denorm_exception_hv:
#ifdef CONFIG_CBE_RAS
STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal)
KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1802)
+#else
+ . = 0x1800
#endif /* CONFIG_CBE_RAS */
- . = 0x3000
/*** Out of line interrupts support ***/
+ .align 7
/* moved from 0x200 */
machine_check_pSeries:
.globl machine_check_fwnmi
@@ -575,16 +621,12 @@ slb_miss_user_pseries:
b . /* prevent spec. execution */
#endif /* __DISABLED__ */
- .align 7
- .globl __end_interrupts
-__end_interrupts:
-
/*
* Code from here down to __end_handlers is invoked from the
* exception prologs above. Because the prologs assemble the
* addresses of these handlers using the LOAD_HANDLER macro,
- * which uses an addi instruction, these handlers must be in
- * the first 32k of the kernel image.
+ * which uses an ori instruction, these handlers must be in
+ * the first 64k of the kernel image.
*/
/*** Common interrupt handlers ***/
@@ -613,8 +655,8 @@ machine_check_common:
STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
- STD_EXCEPTION_COMMON(0xe40, emulation_assist, .program_check_exception)
- STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception)
+ STD_EXCEPTION_COMMON(0xe40, emulation_assist, .program_check_exception)
+ STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception)
STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, .performance_monitor_exception)
STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
STD_EXCEPTION_COMMON(0x1502, denorm, .unknown_exception)
@@ -629,7 +671,158 @@ machine_check_common:
STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
#endif /* CONFIG_CBE_RAS */
+ /*
+ * Relocation-on interrupts: A subset of the interrupts can be delivered
+ * with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering
+ * it. Addresses are the same as the original interrupt addresses, but
+ * offset by 0xc000000000004000.
+ * It's impossible to receive interrupts below 0x300 via this mechanism.
+ * KVM: None of these traps are from the guest ; anything that escalated
+ * to HV=1 from HV=0 is delivered via real mode handlers.
+ */
+
+ /*
+ * This uses the standard macro, since the original 0x300 vector
+ * only has extra guff for STAB-based processors -- which never
+ * come here.
+ */
+ STD_RELON_EXCEPTION_PSERIES(0x4300, 0x300, data_access)
+ . = 0x4380
+ .globl data_access_slb_relon_pSeries
+data_access_slb_relon_pSeries:
+ HMT_MEDIUM
+ SET_SCRATCH0(r13)
+ EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x380)
+ std r3,PACA_EXSLB+EX_R3(r13)
+ mfspr r3,SPRN_DAR
+ mfspr r12,SPRN_SRR1
+#ifndef CONFIG_RELOCATABLE
+ b .slb_miss_realmode
+#else
+ /*
+ * We can't just use a direct branch to .slb_miss_realmode
+ * because the distance from here to there depends on where
+ * the kernel ends up being put.
+ */
+ mfctr r11
+ ld r10,PACAKBASE(r13)
+ LOAD_HANDLER(r10, .slb_miss_realmode)
+ mtctr r10
+ bctr
+#endif
+
+ STD_RELON_EXCEPTION_PSERIES(0x4400, 0x400, instruction_access)
+ . = 0x4480
+ .globl instruction_access_slb_relon_pSeries
+instruction_access_slb_relon_pSeries:
+ HMT_MEDIUM
+ SET_SCRATCH0(r13)
+ EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x480)
+ std r3,PACA_EXSLB+EX_R3(r13)
+ mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
+ mfspr r12,SPRN_SRR1
+#ifndef CONFIG_RELOCATABLE
+ b .slb_miss_realmode
+#else
+ mfctr r11
+ ld r10,PACAKBASE(r13)
+ LOAD_HANDLER(r10, .slb_miss_realmode)
+ mtctr r10
+ bctr
+#endif
+
+ . = 0x4500
+ .globl hardware_interrupt_relon_pSeries;
+ .globl hardware_interrupt_relon_hv;
+hardware_interrupt_relon_pSeries:
+hardware_interrupt_relon_hv:
+ BEGIN_FTR_SECTION
+ _MASKABLE_RELON_EXCEPTION_PSERIES(0x502, hardware_interrupt, EXC_HV, SOFTEN_TEST_HV)
+ FTR_SECTION_ELSE
+ _MASKABLE_RELON_EXCEPTION_PSERIES(0x500, hardware_interrupt, EXC_STD, SOFTEN_TEST_PR)
+ ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_206)
+ STD_RELON_EXCEPTION_PSERIES(0x4600, 0x600, alignment)
+ STD_RELON_EXCEPTION_PSERIES(0x4700, 0x700, program_check)
+ STD_RELON_EXCEPTION_PSERIES(0x4800, 0x800, fp_unavailable)
+ MASKABLE_RELON_EXCEPTION_PSERIES(0x4900, 0x900, decrementer)
+ STD_RELON_EXCEPTION_HV(0x4980, 0x982, hdecrementer)
+ STD_RELON_EXCEPTION_PSERIES(0x4b00, 0xb00, trap_0b)
+
+ . = 0x4c00
+ .globl system_call_relon_pSeries
+system_call_relon_pSeries:
+ HMT_MEDIUM
+ SYSCALL_PSERIES_1
+ SYSCALL_PSERIES_2_DIRECT
+ SYSCALL_PSERIES_3
+
+ STD_RELON_EXCEPTION_PSERIES(0x4d00, 0xd00, single_step)
+
+ . = 0x4e00
+ b h_data_storage_relon_hv
+
+ . = 0x4e20
+ b h_instr_storage_relon_hv
+
+ . = 0x4e40
+ b emulation_assist_relon_hv
+
+ . = 0x4e50
+ b hmi_exception_relon_hv
+
+ . = 0x4e60
+ b hmi_exception_relon_hv
+
+ /* For when we support the doorbell interrupt:
+ STD_RELON_EXCEPTION_HYPERVISOR(0x4e80, 0xe80, doorbell_hyper)
+ */
+
+performance_monitor_relon_pSeries_1:
+ . = 0x4f00
+ b performance_monitor_relon_pSeries
+
+altivec_unavailable_relon_pSeries_1:
+ . = 0x4f20
+ b altivec_unavailable_relon_pSeries
+
+vsx_unavailable_relon_pSeries_1:
+ . = 0x4f40
+ b vsx_unavailable_relon_pSeries
+
+#ifdef CONFIG_CBE_RAS
+ STD_RELON_EXCEPTION_HV(0x5200, 0x1202, cbe_system_error)
+#endif /* CONFIG_CBE_RAS */
+ STD_RELON_EXCEPTION_PSERIES(0x5300, 0x1300, instruction_breakpoint)
+#ifdef CONFIG_PPC_DENORMALISATION
+ . = 0x5500
+ b denorm_exception_hv
+#endif
+#ifdef CONFIG_CBE_RAS
+ STD_RELON_EXCEPTION_HV(0x5600, 0x1602, cbe_maintenance)
+#else
+#ifdef CONFIG_HVC_SCOM
+ STD_RELON_EXCEPTION_HV(0x5600, 0x1600, maintence_interrupt)
+ KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1600)
+#endif /* CONFIG_HVC_SCOM */
+#endif /* CONFIG_CBE_RAS */
+ STD_RELON_EXCEPTION_PSERIES(0x5700, 0x1700, altivec_assist)
+#ifdef CONFIG_CBE_RAS
+ STD_RELON_EXCEPTION_HV(0x5800, 0x1802, cbe_thermal)
+#endif /* CONFIG_CBE_RAS */
+
+ /* Other future vectors */
.align 7
+ .globl __end_interrupts
+__end_interrupts:
+
+ .align 7
+system_call_entry_direct:
+#if defined(CONFIG_RELOCATABLE)
+ /* The first level prologue may have used LR to get here, saving
+ * orig in r10. To save hacking/ifdeffing common code, restore here.
+ */
+ mtlr r10
+#endif
system_call_entry:
b system_call_common
@@ -714,21 +907,21 @@ data_access_common:
ld r3,PACA_EXGEN+EX_DAR(r13)
lwz r4,PACA_EXGEN+EX_DSISR(r13)
li r5,0x300
- b .do_hash_page /* Try to handle as hpte fault */
+ b .do_hash_page /* Try to handle as hpte fault */
.align 7
- .globl h_data_storage_common
+ .globl h_data_storage_common
h_data_storage_common:
- mfspr r10,SPRN_HDAR
- std r10,PACA_EXGEN+EX_DAR(r13)
- mfspr r10,SPRN_HDSISR
- stw r10,PACA_EXGEN+EX_DSISR(r13)
- EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN)
- bl .save_nvgprs
+ mfspr r10,SPRN_HDAR
+ std r10,PACA_EXGEN+EX_DAR(r13)
+ mfspr r10,SPRN_HDSISR
+ stw r10,PACA_EXGEN+EX_DSISR(r13)
+ EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN)
+ bl .save_nvgprs
DISABLE_INTS
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unknown_exception
- b .ret_from_except
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unknown_exception
+ b .ret_from_except
.align 7
.globl instruction_access_common
@@ -741,7 +934,7 @@ instruction_access_common:
li r5,0x400
b .do_hash_page /* Try to handle as hpte fault */
- STD_EXCEPTION_COMMON(0xe20, h_instr_storage, .unknown_exception)
+ STD_EXCEPTION_COMMON(0xe20, h_instr_storage, .unknown_exception)
/*
* Here is the common SLB miss user that is used when going to virtual
@@ -1152,6 +1345,21 @@ _GLOBAL(do_stab_bolted)
rfid
b . /* prevent speculative execution */
+
+ /* Equivalents to the above handlers for relocation-on interrupt vectors */
+ STD_RELON_EXCEPTION_HV(., 0xe00, h_data_storage)
+ KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe00)
+ STD_RELON_EXCEPTION_HV(., 0xe20, h_instr_storage)
+ KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe20)
+ STD_RELON_EXCEPTION_HV(., 0xe40, emulation_assist)
+ KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe40)
+ STD_RELON_EXCEPTION_HV(., 0xe60, hmi_exception)
+ KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe60)
+
+ STD_RELON_EXCEPTION_PSERIES(., 0xf00, performance_monitor)
+ STD_RELON_EXCEPTION_PSERIES(., 0xf20, altivec_unavailable)
+ STD_RELON_EXCEPTION_PSERIES(., 0xf40, vsx_unavailable)
+
#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
/*
* Data area reserved for FWNMI option.
@@ -1164,7 +1372,7 @@ fwnmi_data_area:
/* pseries and powernv need to keep the whole page from
* 0x7000 to 0x8000 free for use by the firmware
*/
- . = 0x8000
+ . = 0x8000
#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
/* Space for CPU0's segment table */
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 58bddee8e1e8..116f0868695b 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -422,7 +422,7 @@ _STATIC(__after_prom_start)
tovirt(r6,r6) /* on booke, we already run at PAGE_OFFSET */
#endif
-#ifdef CONFIG_CRASH_DUMP
+#ifdef CONFIG_RELOCATABLE
/*
* Check if the kernel has to be running as relocatable kernel based on the
* variable __run_at_load, if it is set the kernel is treated as relocatable
@@ -432,7 +432,8 @@ _STATIC(__after_prom_start)
cmplwi cr0,r7,1
bne 3f
- li r5,__end_interrupts - _stext /* just copy interrupts */
+ /* just copy interrupts */
+ LOAD_REG_IMMEDIATE(r5, __end_interrupts - _stext)
b 5f
3:
#endif
@@ -703,6 +704,7 @@ _INIT_STATIC(start_here_multiplatform)
#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
/* Setup OPAL entry */
+ LOAD_REG_ADDR(r11, opal)
std r28,0(r11);
std r29,8(r11);
#endif
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index 2099d9a879e8..ea78761aa169 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -55,9 +55,6 @@ __setup("powersave=off", powersave_off);
*/
void cpu_idle(void)
{
- if (ppc_md.idle_loop)
- ppc_md.idle_loop(); /* doesn't return */
-
set_thread_flag(TIF_POLLING_NRFLAG);
while (1) {
tick_nohz_idle_enter();
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 8226c6cb348a..c862fd716fe3 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -656,7 +656,7 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
struct iommu_pool *p;
/* number of bytes needed for the bitmap */
- sz = (tbl->it_size + 7) >> 3;
+ sz = BITS_TO_LONGS(tbl->it_size) * sizeof(unsigned long);
page = alloc_pages_node(nid, GFP_ATOMIC, get_order(sz));
if (!page)
@@ -708,7 +708,7 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
void iommu_free_table(struct iommu_table *tbl, const char *node_name)
{
- unsigned long bitmap_sz, i;
+ unsigned long bitmap_sz;
unsigned int order;
if (!tbl || !tbl->it_map) {
@@ -718,17 +718,11 @@ void iommu_free_table(struct iommu_table *tbl, const char *node_name)
}
/* verify that table contains no entries */
- /* it_size is in entries, and we're examining 64 at a time */
- for (i = 0; i < (tbl->it_size/64); i++) {
- if (tbl->it_map[i] != 0) {
- printk(KERN_WARNING "%s: Unexpected TCEs for %s\n",
- __func__, node_name);
- break;
- }
- }
+ if (!bitmap_empty(tbl->it_map, tbl->it_size))
+ pr_warn("%s: Unexpected TCEs for %s\n", __func__, node_name);
/* calculate bitmap size in bytes */
- bitmap_sz = (tbl->it_size + 7) / 8;
+ bitmap_sz = BITS_TO_LONGS(tbl->it_size) * sizeof(unsigned long);
/* free bitmap */
order = get_order(bitmap_sz);
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index fa9f6c72f557..e1ec57e87b3b 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -218,23 +218,23 @@ static void __init export_crashk_values(struct device_node *node)
* be sure what's in them, so remove them. */
prop = of_find_property(node, "linux,crashkernel-base", NULL);
if (prop)
- prom_remove_property(node, prop);
+ of_remove_property(node, prop);
prop = of_find_property(node, "linux,crashkernel-size", NULL);
if (prop)
- prom_remove_property(node, prop);
+ of_remove_property(node, prop);
if (crashk_res.start != 0) {
- prom_add_property(node, &crashk_base_prop);
+ of_add_property(node, &crashk_base_prop);
crashk_size = resource_size(&crashk_res);
- prom_add_property(node, &crashk_size_prop);
+ of_add_property(node, &crashk_size_prop);
}
/*
* memory_limit is required by the kexec-tools to limit the
* crash regions to the actual memory used.
*/
- prom_update_property(node, &memory_limit_prop);
+ of_update_property(node, &memory_limit_prop);
}
static int __init kexec_setup(void)
@@ -249,11 +249,11 @@ static int __init kexec_setup(void)
/* remove any stale properties so ours can be found */
prop = of_find_property(node, kernel_end_prop.name, NULL);
if (prop)
- prom_remove_property(node, prop);
+ of_remove_property(node, prop);
/* information needed by userspace when using default_machine_kexec */
kernel_end = __pa(_end);
- prom_add_property(node, &kernel_end_prop);
+ of_add_property(node, &kernel_end_prop);
export_crashk_values(node);
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index d7f609086a99..7206701b1ff1 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -389,14 +389,14 @@ static int __init export_htab_values(void)
/* remove any stale propertys so ours can be found */
prop = of_find_property(node, htab_base_prop.name, NULL);
if (prop)
- prom_remove_property(node, prop);
+ of_remove_property(node, prop);
prop = of_find_property(node, htab_size_prop.name, NULL);
if (prop)
- prom_remove_property(node, prop);
+ of_remove_property(node, prop);
htab_base = __pa(htab_address);
- prom_add_property(node, &htab_base_prop);
- prom_add_property(node, &htab_size_prop);
+ of_add_property(node, &htab_base_prop);
+ of_add_property(node, &htab_size_prop);
of_node_put(node);
return 0;
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 4b06ec5a502e..64f526a321f5 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -208,7 +208,7 @@ pci_create_OF_bus_map(void)
of_prop->name = "pci-OF-bus-map";
of_prop->length = 256;
of_prop->value = &of_prop[1];
- prom_add_property(dn, of_prop);
+ of_add_property(dn, of_prop);
of_node_put(dn);
}
}
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 37725e86651e..8b6f7a99cce2 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -32,6 +32,7 @@
#include <linux/debugfs.h>
#include <linux/irq.h>
#include <linux/memblock.h>
+#include <linux/of.h>
#include <asm/prom.h>
#include <asm/rtas.h>
@@ -49,11 +50,11 @@
#include <asm/btext.h>
#include <asm/sections.h>
#include <asm/machdep.h>
-#include <asm/pSeries_reconfig.h>
#include <asm/pci-bridge.h>
#include <asm/kexec.h>
#include <asm/opal.h>
#include <asm/fadump.h>
+#include <asm/debug.h>
#include <mm/mmu_decl.h>
@@ -802,7 +803,7 @@ static int prom_reconfig_notifier(struct notifier_block *nb,
int err;
switch (action) {
- case PSERIES_RECONFIG_ADD:
+ case OF_RECONFIG_ATTACH_NODE:
err = of_finish_dynamic_node(node);
if (err < 0)
printk(KERN_ERR "finish_node returned %d\n", err);
@@ -821,7 +822,7 @@ static struct notifier_block prom_reconfig_nb = {
static int __init prom_reconfig_setup(void)
{
- return pSeries_reconfig_notifier_register(&prom_reconfig_nb);
+ return of_reconfig_notifier_register(&prom_reconfig_nb);
}
__initcall(prom_reconfig_setup);
#endif
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index cb6c123722a2..779f34049a56 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -671,6 +671,7 @@ static void __init early_cmdline_parse(void)
#define OV1_PPC_2_04 0x08 /* set if we support PowerPC 2.04 */
#define OV1_PPC_2_05 0x04 /* set if we support PowerPC 2.05 */
#define OV1_PPC_2_06 0x02 /* set if we support PowerPC 2.06 */
+#define OV1_PPC_2_07 0x01 /* set if we support PowerPC 2.07 */
/* Option vector 2: Open Firmware options supported */
#define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */
@@ -707,6 +708,7 @@ static void __init early_cmdline_parse(void)
#define OV5_PFO_HW_RNG 0x80 /* PFO Random Number Generator */
#define OV5_PFO_HW_842 0x40 /* PFO Compression Accelerator */
#define OV5_PFO_HW_ENCR 0x20 /* PFO Encryption Accelerator */
+#define OV5_SUB_PROCESSORS 0x01 /* 1,2,or 4 Sub-Processors supported */
/* Option Vector 6: IBM PAPR hints */
#define OV6_LINUX 0x02 /* Linux is our OS */
@@ -719,6 +721,8 @@ static unsigned char ibm_architecture_vec[] = {
W(0xfffe0000), W(0x003a0000), /* POWER5/POWER5+ */
W(0xffff0000), W(0x003e0000), /* POWER6 */
W(0xffff0000), W(0x003f0000), /* POWER7 */
+ W(0xffff0000), W(0x004b0000), /* POWER8 */
+ W(0xffffffff), W(0x0f000004), /* all 2.07-compliant */
W(0xffffffff), W(0x0f000003), /* all 2.06-compliant */
W(0xffffffff), W(0x0f000002), /* all 2.05-compliant */
W(0xfffffffe), W(0x0f000001), /* all 2.04-compliant and earlier */
@@ -728,7 +732,7 @@ static unsigned char ibm_architecture_vec[] = {
3 - 2, /* length */
0, /* don't ignore, don't halt */
OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 |
- OV1_PPC_2_04 | OV1_PPC_2_05 | OV1_PPC_2_06,
+ OV1_PPC_2_04 | OV1_PPC_2_05 | OV1_PPC_2_06 | OV1_PPC_2_07,
/* option vector 2: Open Firmware options supported */
34 - 2, /* length */
@@ -755,7 +759,7 @@ static unsigned char ibm_architecture_vec[] = {
OV4_MIN_ENT_CAP, /* minimum VP entitled capacity */
/* option vector 5: PAPR/OF options */
- 18 - 2, /* length */
+ 19 - 2, /* length */
0, /* don't ignore, don't halt */
OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY |
OV5_DONATE_DEDICATE_CPU | OV5_MSI,
@@ -769,13 +773,14 @@ static unsigned char ibm_architecture_vec[] = {
* must match by the macro below. Update the definition if
* the structure layout changes.
*/
-#define IBM_ARCH_VEC_NRCORES_OFFSET 101
+#define IBM_ARCH_VEC_NRCORES_OFFSET 117
W(NR_CPUS), /* number of cores supported */
0,
0,
0,
0,
OV5_PFO_HW_RNG | OV5_PFO_HW_ENCR | OV5_PFO_HW_842,
+ OV5_SUB_PROCESSORS,
/* option vector 6: IBM PAPR hints */
4 - 2, /* length */
0,
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 79d8e56470df..c4970004d44d 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -952,6 +952,10 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
arch_bp_generic_fields(data &
(DABR_DATA_WRITE | DABR_DATA_READ),
&attr.bp_type);
+
+ /* Enable breakpoint */
+ attr.disabled = false;
+
ret = modify_user_hw_breakpoint(bp, &attr);
if (ret) {
ptrace_put_breakpoints(task);
@@ -1037,7 +1041,7 @@ void ptrace_disable(struct task_struct *child)
}
#ifdef CONFIG_PPC_ADV_DEBUG_REGS
-static long set_intruction_bp(struct task_struct *child,
+static long set_instruction_bp(struct task_struct *child,
struct ppc_hw_breakpoint *bp_info)
{
int slot;
@@ -1338,6 +1342,12 @@ static int set_dac_range(struct task_struct *child,
static long ppc_set_hwdebug(struct task_struct *child,
struct ppc_hw_breakpoint *bp_info)
{
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ int len = 0;
+ struct thread_struct *thread = &(child->thread);
+ struct perf_event *bp;
+ struct perf_event_attr attr;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
#ifndef CONFIG_PPC_ADV_DEBUG_REGS
unsigned long dabr;
#endif
@@ -1365,7 +1375,7 @@ static long ppc_set_hwdebug(struct task_struct *child,
if ((bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_EXECUTE) ||
(bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE))
return -EINVAL;
- return set_intruction_bp(child, bp_info);
+ return set_instruction_bp(child, bp_info);
}
if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
return set_dac(child, bp_info);
@@ -1381,13 +1391,9 @@ static long ppc_set_hwdebug(struct task_struct *child,
*/
if ((bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_RW) == 0 ||
(bp_info->trigger_type & ~PPC_BREAKPOINT_TRIGGER_RW) != 0 ||
- bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT ||
bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
return -EINVAL;
- if (child->thread.dabr)
- return -ENOSPC;
-
if ((unsigned long)bp_info->addr >= TASK_SIZE)
return -EIO;
@@ -1397,6 +1403,50 @@ static long ppc_set_hwdebug(struct task_struct *child,
dabr |= DABR_DATA_READ;
if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
dabr |= DABR_DATA_WRITE;
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ if (ptrace_get_breakpoints(child) < 0)
+ return -ESRCH;
+
+ /*
+ * Check if the request is for 'range' breakpoints. We can
+ * support it if range < 8 bytes.
+ */
+ if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE) {
+ len = bp_info->addr2 - bp_info->addr;
+ } else if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
+ ptrace_put_breakpoints(child);
+ return -EINVAL;
+ }
+ bp = thread->ptrace_bps[0];
+ if (bp) {
+ ptrace_put_breakpoints(child);
+ return -ENOSPC;
+ }
+
+ /* Create a new breakpoint request if one doesn't exist already */
+ hw_breakpoint_init(&attr);
+ attr.bp_addr = (unsigned long)bp_info->addr & ~HW_BREAKPOINT_ALIGN;
+ attr.bp_len = len;
+ arch_bp_generic_fields(dabr & (DABR_DATA_WRITE | DABR_DATA_READ),
+ &attr.bp_type);
+
+ thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr,
+ ptrace_triggered, NULL, child);
+ if (IS_ERR(bp)) {
+ thread->ptrace_bps[0] = NULL;
+ ptrace_put_breakpoints(child);
+ return PTR_ERR(bp);
+ }
+
+ ptrace_put_breakpoints(child);
+ return 1;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
+ if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT)
+ return -EINVAL;
+
+ if (child->thread.dabr)
+ return -ENOSPC;
child->thread.dabr = dabr;
child->thread.dabrx = DABRX_ALL;
@@ -1405,8 +1455,13 @@ static long ppc_set_hwdebug(struct task_struct *child,
#endif /* !CONFIG_PPC_ADV_DEBUG_DVCS */
}
-static long ppc_del_hwdebug(struct task_struct *child, long addr, long data)
+static long ppc_del_hwdebug(struct task_struct *child, long data)
{
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ int ret = 0;
+ struct thread_struct *thread = &(child->thread);
+ struct perf_event *bp;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
#ifdef CONFIG_PPC_ADV_DEBUG_REGS
int rc;
@@ -1426,10 +1481,25 @@ static long ppc_del_hwdebug(struct task_struct *child, long addr, long data)
#else
if (data != 1)
return -EINVAL;
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ if (ptrace_get_breakpoints(child) < 0)
+ return -ESRCH;
+
+ bp = thread->ptrace_bps[0];
+ if (bp) {
+ unregister_hw_breakpoint(bp);
+ thread->ptrace_bps[0] = NULL;
+ } else
+ ret = -ENOENT;
+ ptrace_put_breakpoints(child);
+ return ret;
+#else /* CONFIG_HAVE_HW_BREAKPOINT */
if (child->thread.dabr == 0)
return -ENOENT;
child->thread.dabr = 0;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
return 0;
#endif
@@ -1536,7 +1606,11 @@ long arch_ptrace(struct task_struct *child, long request,
dbginfo.data_bp_alignment = 4;
#endif
dbginfo.sizeof_condition = 0;
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ dbginfo.features = PPC_DEBUG_FEATURE_DATA_BP_RANGE;
+#else
dbginfo.features = 0;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
if (!access_ok(VERIFY_WRITE, datavp,
@@ -1563,7 +1637,7 @@ long arch_ptrace(struct task_struct *child, long request,
}
case PPC_PTRACE_DELHWDEBUG: {
- ret = ppc_del_hwdebug(child, addr, data);
+ ret = ppc_del_hwdebug(child, data);
break;
}
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index fcec38241f79..1fd6e7b2f390 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -42,7 +42,6 @@
#include <asm/time.h>
#include <asm/mmu.h>
#include <asm/topology.h>
-#include <asm/pSeries_reconfig.h>
struct rtas_t rtas = {
.lock = __ARCH_SPIN_LOCK_UNLOCKED
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index 20b0120db0c3..8329190312c1 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -650,10 +650,8 @@ static int initialize_flash_pde_data(const char *rtas_call_name,
int token;
dp->data = kzalloc(buf_size, GFP_KERNEL);
- if (dp->data == NULL) {
- remove_flash_pde(dp);
+ if (dp->data == NULL)
return -ENOMEM;
- }
/*
* This code assumes that the status int is the first member of the
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index efb6a41b3131..6da881b35dac 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -601,6 +601,11 @@ void __init setup_arch(char **cmdline_p)
kvm_linear_init();
+ /* Interrupt code needs to be 64K-aligned */
+ if ((unsigned long)_stext & 0xffff)
+ panic("Kernelbase not 64K-aligned (0x%lx)!\n",
+ (unsigned long)_stext);
+
ppc64_boot_msg(0x15, "Setup Done");
}
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index c39c1ca77f46..f9748498fe58 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -122,29 +122,6 @@ int udbg_write(const char *s, int n)
return n - remain;
}
-int udbg_read(char *buf, int buflen)
-{
- char *p = buf;
- int i, c;
-
- if (!udbg_getc)
- return 0;
-
- for (i = 0; i < buflen; ++i) {
- do {
- c = udbg_getc();
- if (c == -1 && i == 0)
- return -1;
-
- } while (c == 0x11 || c == 0x13);
- if (c == 0 || c == -1)
- break;
- *p++ = c;
- }
-
- return i;
-}
-
#define UDBG_BUFSIZE 256
void udbg_printf(const char *fmt, ...)
{
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 22:10:59 +0000