diff options
Diffstat (limited to 'arch/powerpc/platforms/85xx/sbc8560.c')
| -rw-r--r-- | arch/powerpc/platforms/85xx/sbc8560.c | 254 |
1 files changed, 0 insertions, 254 deletions
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c deleted file mode 100644 index b1be632ede43..000000000000 --- a/arch/powerpc/platforms/85xx/sbc8560.c +++ /dev/null @@ -1,254 +0,0 @@ -/* - * Wind River SBC8560 setup and early boot code. - * - * Copyright 2007 Wind River Systems Inc. - * - * By Paul Gortmaker (see MAINTAINERS for contact information) - * - * Based largely on the MPC8560ADS support - Copyright 2005 Freescale Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/of_platform.h> - -#include <asm/time.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <asm/mpic.h> -#include <mm/mmu_decl.h> -#include <asm/udbg.h> - -#include <sysdev/fsl_soc.h> -#include <sysdev/fsl_pci.h> - -#include "mpc85xx.h" - -#ifdef CONFIG_CPM2 -#include <asm/cpm2.h> -#include <sysdev/cpm2_pic.h> -#endif - -static void __init sbc8560_pic_init(void) -{ - struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, - 0, 256, " OpenPIC "); - BUG_ON(mpic == NULL); - mpic_init(mpic); - - mpc85xx_cpm2_pic_init(); -} - -/* - * Setup the architecture - */ -#ifdef CONFIG_CPM2 -struct cpm_pin { - int port, pin, flags; -}; - -static const struct cpm_pin sbc8560_pins[] = { - /* SCC1 */ - {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, - {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - - /* SCC2 */ - {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - - /* FCC2 */ - {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, - {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */ - {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */ - - /* FCC3 */ - {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */ - {2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */ -}; - -static void __init init_ioports(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(sbc8560_pins); i++) { - const struct cpm_pin *pin = &sbc8560_pins[i]; - cpm2_set_pin(pin->port, pin->pin, pin->flags); - } - - cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX); - cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX); - cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX); - cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX); - cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX); - cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX); - cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX); - cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX); -} -#endif - -static void __init sbc8560_setup_arch(void) -{ -#ifdef CONFIG_PCI - struct device_node *np; -#endif - - if (ppc_md.progress) - ppc_md.progress("sbc8560_setup_arch()", 0); - -#ifdef CONFIG_CPM2 - cpm2_reset(); - init_ioports(); -#endif - -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8540-pci") - fsl_add_bridge(np, 1); -#endif -} - -static void sbc8560_show_cpuinfo(struct seq_file *m) -{ - uint pvid, svid, phid1; - - pvid = mfspr(SPRN_PVR); - svid = mfspr(SPRN_SVR); - - seq_printf(m, "Vendor\t\t: Wind River\n"); - seq_printf(m, "PVR\t\t: 0x%x\n", pvid); - seq_printf(m, "SVR\t\t: 0x%x\n", svid); - - /* Display cpu Pll setting */ - phid1 = mfspr(SPRN_HID1); - seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); -} - -machine_device_initcall(sbc8560, mpc85xx_common_publish_devices); - -/* - * Called very early, device-tree isn't unflattened - */ -static int __init sbc8560_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - return of_flat_dt_is_compatible(root, "SBC8560"); -} - -#ifdef CONFIG_RTC_DRV_M48T59 -static int __init sbc8560_rtc_init(void) -{ - struct device_node *np; - struct resource res; - struct platform_device *rtc_dev; - - np = of_find_compatible_node(NULL, NULL, "m48t59"); - if (np == NULL) { - printk("No RTC in DTB. Has it been eaten by wild dogs?\n"); - return -ENODEV; - } - - of_address_to_resource(np, 0, &res); - of_node_put(np); - - printk("Found RTC (m48t59) at i/o 0x%x\n", res.start); - - rtc_dev = platform_device_register_simple("rtc-m48t59", 0, &res, 1); - - if (IS_ERR(rtc_dev)) { - printk("Registering sbc8560 RTC device failed\n"); - return PTR_ERR(rtc_dev); - } - - return 0; -} - -arch_initcall(sbc8560_rtc_init); - -#endif /* M48T59 */ - -static __u8 __iomem *brstcr; - -static int __init sbc8560_bdrstcr_init(void) -{ - struct device_node *np; - struct resource res; - - np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr"); - if (np == NULL) { - printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n"); - return -ENODEV; - } - - of_address_to_resource(np, 0, &res); - - printk(KERN_INFO "sbc8560: Found BRSTCR at %pR\n", &res); - - brstcr = ioremap(res.start, resource_size(&res)); - if(!brstcr) - printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n"); - - of_node_put(np); - - return 0; -} - -arch_initcall(sbc8560_bdrstcr_init); - -void sbc8560_rstcr_restart(char * cmd) -{ - local_irq_disable(); - if(brstcr) - clrbits8(brstcr, 0x80); - - while(1); -} - -define_machine(sbc8560) { - .name = "SBC8560", - .probe = sbc8560_probe, - .setup_arch = sbc8560_setup_arch, - .init_IRQ = sbc8560_pic_init, - .show_cpuinfo = sbc8560_show_cpuinfo, - .get_irq = mpic_get_irq, - .restart = sbc8560_rstcr_restart, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, -}; |