diff options
Diffstat (limited to 'arch/sh/boards')
| -rw-r--r-- | arch/sh/boards/Kconfig | 15 | ||||
| -rw-r--r-- | arch/sh/boards/Makefile | 2 | ||||
| -rw-r--r-- | arch/sh/boards/of-generic.c | 113 |
3 files changed, 130 insertions, 0 deletions
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 89963d13f930..5e52d5362292 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -6,6 +6,21 @@ config SOLUTION_ENGINE config SH_ALPHA_BOARD bool +config SH_DEVICE_TREE + bool "Board Described by Device Tree" + select OF + select OF_EARLY_FLATTREE + select CLKSRC_OF + select GENERIC_CALIBRATE_DELAY + help + Select Board Described by Device Tree to build a kernel that + does not hard-code any board-specific knowledge but instead uses + a device tree blob provided by the boot-loader. You must enable + drivers for any hardware you want to use separately. At this + time, only boards based on the open-hardware J-Core processors + have sufficient driver coverage to use this option; do not + select it if you are using original SuperH hardware. + config SH_SOLUTION_ENGINE bool "SolutionEngine" select SOLUTION_ENGINE diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile index 975a0f64ff20..cea300362035 100644 --- a/arch/sh/boards/Makefile +++ b/arch/sh/boards/Makefile @@ -15,3 +15,5 @@ obj-$(CONFIG_SH_TITAN) += board-titan.o obj-$(CONFIG_SH_SH7757LCR) += board-sh7757lcr.o obj-$(CONFIG_SH_APSH4A3A) += board-apsh4a3a.o obj-$(CONFIG_SH_APSH4AD0A) += board-apsh4ad0a.o + +obj-$(CONFIG_SH_DEVICE_TREE) += of-generic.o diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c new file mode 100644 index 000000000000..71d890932151 --- /dev/null +++ b/arch/sh/boards/of-generic.c @@ -0,0 +1,113 @@ +/* + * SH generic board support, using device tree + * + * Copyright (C) 2015-2016 Smart Energy Instruments, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/of_fdt.h> +#include <linux/of_iommu.h> +#include <linux/clocksource.h> +#include <linux/irqchip.h> +#include <linux/clk-provider.h> +#include <asm/machvec.h> +#include <asm/rtc.h> + +static void noop(void) +{ +} + +static int noopi(void) +{ + return 0; +} + +static void __init sh_of_mem_reserve(void) +{ + early_init_fdt_reserve_self(); + early_init_fdt_scan_reserved_mem(); +} + +static void __init sh_of_time_init(void) +{ + pr_info("SH generic board support: scanning for clocksource devices\n"); + clocksource_probe(); +} + +static void __init sh_of_setup(char **cmdline_p) +{ + unflatten_device_tree(); + + board_time_init = sh_of_time_init; + + sh_mv.mv_name = of_flat_dt_get_machine_name(); + if (!sh_mv.mv_name) + sh_mv.mv_name = "Unknown SH model"; + + /* FIXME: register smp ops to use dt to find cpus, use + * cpu enable-method, and use irq controller's ipi + * functions. */ +} + +static int sh_of_irq_demux(int irq) +{ + /* FIXME: eventually this should not be used at all; + * the interrupt controller should set_handle_irq(). */ + return irq; +} + +static void __init sh_of_init_irq(void) +{ + pr_info("SH generic board support: scanning for interrupt controllers\n"); + irqchip_init(); +} + +static int __init sh_of_clk_init(void) +{ +#ifdef CONFIG_COMMON_CLK + /* Disabled pending move to COMMON_CLK framework. */ + pr_info("SH generic board support: scanning for clk providers\n"); + of_clk_init(NULL); +#endif + return 0; +} + +static struct sh_machine_vector __initmv sh_of_generic_mv = { + .mv_setup = sh_of_setup, + .mv_name = "devicetree", /* replaced by DT root's model */ + .mv_irq_demux = sh_of_irq_demux, + .mv_init_irq = sh_of_init_irq, + .mv_clk_init = sh_of_clk_init, + .mv_mode_pins = noopi, + .mv_mem_init = noop, + .mv_mem_reserve = sh_of_mem_reserve, +}; + +struct sh_clk_ops; + +void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx) +{ +} + +void __init plat_irq_setup(void) +{ +} + +static int __init sh_of_device_init(void) +{ + pr_info("SH generic board support: populating platform devices\n"); + if (of_have_populated_dt()) { + of_iommu_init(); + of_platform_populate(NULL, of_default_bus_match_table, + NULL, NULL); + } else { + pr_crit("Device tree not populated\n"); + } + return 0; +} +arch_initcall_sync(sh_of_device_init); |