diff options
Diffstat (limited to 'arch/x86/ia32')
| -rw-r--r-- | arch/x86/ia32/ia32entry.S | 62 |
1 files changed, 37 insertions, 25 deletions
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index 3aefbce2de48..20371d0635e4 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -61,6 +61,19 @@ CFI_UNDEFINED r15 .endm +#ifdef CONFIG_PARAVIRT +ENTRY(native_usergs_sysret32) + swapgs + sysretl +ENDPROC(native_usergs_sysret32) + +ENTRY(native_irq_enable_sysexit) + swapgs + sti + sysexit +ENDPROC(native_irq_enable_sysexit) +#endif + /* * 32bit SYSENTER instruction entry. * @@ -85,14 +98,14 @@ ENTRY(ia32_sysenter_target) CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,0 CFI_REGISTER rsp,rbp - swapgs + SWAPGS_UNSAFE_STACK movq %gs:pda_kernelstack, %rsp addq $(PDA_STACKOFFSET),%rsp /* * No need to follow this irqs on/off section: the syscall * disabled irqs, here we enable it straight after entry: */ - sti + ENABLE_INTERRUPTS(CLBR_NONE) movl %ebp,%ebp /* zero extension */ pushq $__USER32_DS CFI_ADJUST_CFA_OFFSET 8 @@ -103,7 +116,7 @@ ENTRY(ia32_sysenter_target) pushfq CFI_ADJUST_CFA_OFFSET 8 /*CFI_REL_OFFSET rflags,0*/ - movl 8*3-THREAD_SIZE+threadinfo_sysenter_return(%rsp), %r10d + movl 8*3-THREAD_SIZE+TI_sysenter_return(%rsp), %r10d CFI_REGISTER rip,r10 pushq $__USER32_CS CFI_ADJUST_CFA_OFFSET 8 @@ -123,8 +136,9 @@ ENTRY(ia32_sysenter_target) .quad 1b,ia32_badarg .previous GET_THREAD_INFO(%r10) - orl $TS_COMPAT,threadinfo_status(%r10) - testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%r10) + orl $TS_COMPAT,TI_status(%r10) + testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \ + TI_flags(%r10) CFI_REMEMBER_STATE jnz sysenter_tracesys sysenter_do_call: @@ -134,11 +148,11 @@ sysenter_do_call: call *ia32_sys_call_table(,%rax,8) movq %rax,RAX-ARGOFFSET(%rsp) GET_THREAD_INFO(%r10) - cli + DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF - testl $_TIF_ALLWORK_MASK,threadinfo_flags(%r10) + testl $_TIF_ALLWORK_MASK,TI_flags(%r10) jnz int_ret_from_sys_call - andl $~TS_COMPAT,threadinfo_status(%r10) + andl $~TS_COMPAT,TI_status(%r10) /* clear IF, that popfq doesn't enable interrupts early */ andl $~0x200,EFLAGS-R11(%rsp) movl RIP-R11(%rsp),%edx /* User %eip */ @@ -151,10 +165,7 @@ sysenter_do_call: CFI_ADJUST_CFA_OFFSET -8 CFI_REGISTER rsp,rcx TRACE_IRQS_ON - swapgs - sti /* sti only takes effect after the next instruction */ - /* sysexit */ - .byte 0xf, 0x35 + ENABLE_INTERRUPTS_SYSEXIT32 sysenter_tracesys: CFI_RESTORE_STATE @@ -200,7 +211,7 @@ ENTRY(ia32_cstar_target) CFI_DEF_CFA rsp,PDA_STACKOFFSET CFI_REGISTER rip,rcx /*CFI_REGISTER rflags,r11*/ - swapgs + SWAPGS_UNSAFE_STACK movl %esp,%r8d CFI_REGISTER rsp,r8 movq %gs:pda_kernelstack,%rsp @@ -208,7 +219,7 @@ ENTRY(ia32_cstar_target) * No need to follow this irqs on/off section: the syscall * disabled irqs and here we enable it straight after entry: */ - sti + ENABLE_INTERRUPTS(CLBR_NONE) SAVE_ARGS 8,1,1 movl %eax,%eax /* zero extension */ movq %rax,ORIG_RAX-ARGOFFSET(%rsp) @@ -230,8 +241,9 @@ ENTRY(ia32_cstar_target) .quad 1b,ia32_badarg .previous GET_THREAD_INFO(%r10) - orl $TS_COMPAT,threadinfo_status(%r10) - testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%r10) + orl $TS_COMPAT,TI_status(%r10) + testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \ + TI_flags(%r10) CFI_REMEMBER_STATE jnz cstar_tracesys cstar_do_call: @@ -241,11 +253,11 @@ cstar_do_call: call *ia32_sys_call_table(,%rax,8) movq %rax,RAX-ARGOFFSET(%rsp) GET_THREAD_INFO(%r10) - cli + DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF - testl $_TIF_ALLWORK_MASK,threadinfo_flags(%r10) + testl $_TIF_ALLWORK_MASK,TI_flags(%r10) jnz int_ret_from_sys_call - andl $~TS_COMPAT,threadinfo_status(%r10) + andl $~TS_COMPAT,TI_status(%r10) RESTORE_ARGS 1,-ARG_SKIP,1,1,1 movl RIP-ARGOFFSET(%rsp),%ecx CFI_REGISTER rip,rcx @@ -254,8 +266,7 @@ cstar_do_call: TRACE_IRQS_ON movl RSP-ARGOFFSET(%rsp),%esp CFI_RESTORE rsp - swapgs - sysretl + USERGS_SYSRET32 cstar_tracesys: CFI_RESTORE_STATE @@ -310,12 +321,12 @@ ENTRY(ia32_syscall) /*CFI_REL_OFFSET rflags,EFLAGS-RIP*/ /*CFI_REL_OFFSET cs,CS-RIP*/ CFI_REL_OFFSET rip,RIP-RIP - swapgs + SWAPGS /* * No need to follow this irqs on/off section: the syscall * disabled irqs and here we enable it straight after entry: */ - sti + ENABLE_INTERRUPTS(CLBR_NONE) movl %eax,%eax pushq %rax CFI_ADJUST_CFA_OFFSET 8 @@ -324,8 +335,9 @@ ENTRY(ia32_syscall) this could be a problem. */ SAVE_ARGS 0,0,1 GET_THREAD_INFO(%r10) - orl $TS_COMPAT,threadinfo_status(%r10) - testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%r10) + orl $TS_COMPAT,TI_status(%r10) + testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \ + TI_flags(%r10) jnz ia32_tracesys ia32_do_syscall: cmpl $(IA32_NR_syscalls-1),%eax |