diff options
Diffstat (limited to 'arch/xtensa')
-rw-r--r-- | arch/xtensa/Kconfig | 29 | ||||
-rw-r--r-- | arch/xtensa/boot/boot-elf/Makefile | 1 | ||||
-rw-r--r-- | arch/xtensa/boot/boot-elf/boot.lds.S | 64 | ||||
-rw-r--r-- | arch/xtensa/boot/boot-elf/bootstrap.S | 101 | ||||
-rw-r--r-- | arch/xtensa/boot/boot-uboot/Makefile | 6 | ||||
-rw-r--r-- | arch/xtensa/include/asm/initialize_mmu.h | 107 | ||||
-rw-r--r-- | arch/xtensa/include/asm/vectors.h | 125 | ||||
-rw-r--r-- | arch/xtensa/kernel/Makefile | 2 | ||||
-rw-r--r-- | arch/xtensa/kernel/head.S | 37 | ||||
-rw-r--r-- | arch/xtensa/kernel/vectors.S | 3 | ||||
-rw-r--r-- | arch/xtensa/kernel/vmlinux.lds.S | 48 | ||||
-rw-r--r-- | arch/xtensa/mm/mmu.c | 14 |
12 files changed, 451 insertions, 86 deletions
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index b09de49dbec5..213ac3d9f950 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -103,6 +103,35 @@ config MATH_EMULATION help Can we use information of configuration file? +config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX + bool "Initialize Xtensa MMU inside the Linux kernel code" + default y + help + Earlier version initialized the MMU in the exception vector + before jumping to _startup in head.S and had an advantage that + it was possible to place a software breakpoint at 'reset' and + then enter your normal kernel breakpoints once the MMU was mapped + to the kernel mappings (0XC0000000). + + This unfortunately doesn't work for U-Boot and likley also wont + work for using KEXEC to have a hot kernel ready for doing a + KDUMP. + + So now the MMU is initialized in head.S but it's necessary to + use hardware breakpoints (gdb 'hbreak' cmd) to break at _startup. + xt-gdb can't place a Software Breakpoint in the 0XD region prior + to mapping the MMU and after mapping even if the area of low memory + was mapped gdb wouldn't remove the breakpoint on hitting it as the + PC wouldn't match. Since Hardware Breakpoints are recommended for + Linux configurations it seems reasonable to just assume they exist + and leave this older mechanism for unfortunate souls that choose + not to follow Tensilica's recommendation. + + Selecting this will cause U-Boot to set the KERNEL Load and Entry + address at 0x00003000 instead of the mapped std of 0xD0003000. + + If in doubt, say Y. + endmenu config XTENSA_CALIBRATE_CCOUNT diff --git a/arch/xtensa/boot/boot-elf/Makefile b/arch/xtensa/boot/boot-elf/Makefile index 1fe01b78c124..89db089f5a12 100644 --- a/arch/xtensa/boot/boot-elf/Makefile +++ b/arch/xtensa/boot/boot-elf/Makefile @@ -12,6 +12,7 @@ endif export OBJCOPY_ARGS export CPPFLAGS_boot.lds += -P -C +export KBUILD_AFLAGS += -mtext-section-literals boot-y := bootstrap.o diff --git a/arch/xtensa/boot/boot-elf/boot.lds.S b/arch/xtensa/boot/boot-elf/boot.lds.S index 7b646e0a6486..932b58ef33d4 100644 --- a/arch/xtensa/boot/boot-elf/boot.lds.S +++ b/arch/xtensa/boot/boot-elf/boot.lds.S @@ -1,41 +1,29 @@ -#include <variant/core.h> +/* + * linux/arch/xtensa/boot/boot-elf/boot.lds.S + * + * Copyright (C) 2008 - 2013 by Tensilica Inc. + * + * Chris Zankel <chris@zankel.net> + * Marc Gauthier <marc@tensilica.com + * Pete Delaney <piet@tensilica.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <asm/vectors.h> OUTPUT_ARCH(xtensa) ENTRY(_ResetVector) SECTIONS { - .start 0xD0000000 : { *(.start) } - - .text 0xD0000000: - { - __reloc_start = . ; - _text_start = . ; - *(.literal .text.literal .text) - _text_end = . ; - } - - .rodata ALIGN(0x04): - { - *(.rodata) - *(.rodata1) - } - - .data ALIGN(0x04): + .ResetVector.text XCHAL_RESET_VECTOR_VADDR : { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.got.plt) - *(.got) - *(.dynamic) + *(.ResetVector.text) } - __reloc_end = . ; - - . = ALIGN(0x10); - __image_load = . ; - .image 0xd0001000: + .image KERNELOFFSET: AT (LOAD_MEMORY_ADDRESS) { _image_start = .; *(image) @@ -43,7 +31,6 @@ SECTIONS _image_end = . ; } - .bss ((LOADADDR(.image) + SIZEOF(.image) + 3) & ~ 3): { __bss_start = .; @@ -53,14 +40,15 @@ SECTIONS *(.bss) __bss_end = .; } - _end = .; - _param_start = .; - .ResetVector.text XCHAL_RESET_VECTOR_VADDR : + /* + * This is a remapped copy of the Reset Vector Code. + * It keeps gdb in sync with the PC after switching + * to the temporary mapping used while setting up + * the V2 MMU mappings for Linux. + */ + .ResetVector.remapped_text 0x46000000 (INFO): { - *(.ResetVector.text) + *(.ResetVector.remapped_text) } - - - PROVIDE (end = .); } diff --git a/arch/xtensa/boot/boot-elf/bootstrap.S b/arch/xtensa/boot/boot-elf/bootstrap.S index 464298bc348b..1388a499753b 100644 --- a/arch/xtensa/boot/boot-elf/bootstrap.S +++ b/arch/xtensa/boot/boot-elf/bootstrap.S @@ -1,18 +1,77 @@ +/* + * arch/xtensa/boot/boot-elf/bootstrap.S + * + * Low-level exception handling + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004 - 2013 by Tensilica Inc. + * + * Chris Zankel <chris@zankel.net> + * Marc Gauthier <marc@tensilica.com> + * Piet Delaney <piet@tensilica.com> + */ #include <asm/bootparam.h> +#include <asm/processor.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/cacheasm.h> +#include <asm/initialize_mmu.h> +#include <linux/linkage.h> - -/* ResetVector - */ - .section .ResetVector.text, "ax" + .section .ResetVector.text, "ax" .global _ResetVector + .global reset + _ResetVector: - _j reset + _j _SetupMMU + + .begin no-absolute-literals + .literal_position + .align 4 RomInitAddr: - .word 0xd0001000 +#if defined(CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) && \ + XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY + .word 0x00003000 +#else + .word 0xd0003000 +#endif RomBootParam: .word _bootparam +_bootparam: + .short BP_TAG_FIRST + .short 4 + .long BP_VERSION + .short BP_TAG_LAST + .short 0 + .long 0 + + .align 4 +_SetupMMU: + movi a0, 0 + wsr a0, windowbase + rsync + movi a0, 1 + wsr a0, windowstart + rsync + movi a0, 0x1F + wsr a0, ps + rsync + + Offset = _SetupMMU - _ResetVector + +#ifndef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX + initialize_mmu +#endif + + .end no-absolute-literals + + rsil a0, XCHAL_DEBUGLEVEL-1 + rsync reset: l32r a0, RomInitAddr l32r a2, RomBootParam @@ -21,13 +80,25 @@ reset: jx a0 .align 4 - .section .bootstrap.data, "aw" - .globl _bootparam -_bootparam: - .short BP_TAG_FIRST - .short 4 - .long BP_VERSION - .short BP_TAG_LAST - .short 0 - .long 0 + .section .ResetVector.remapped_text, "x" + .global _RemappedResetVector + + /* Do org before literals */ + .org 0 + +_RemappedResetVector: + .begin no-absolute-literals + .literal_position + + _j _RemappedSetupMMU + + /* Position Remapped code at the same location as the original code */ + . = _RemappedResetVector + Offset + +_RemappedSetupMMU: +#ifndef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX + initialize_mmu +#endif + + .end no-absolute-literals diff --git a/arch/xtensa/boot/boot-uboot/Makefile b/arch/xtensa/boot/boot-uboot/Makefile index bfbf8af582f1..545759819ef9 100644 --- a/arch/xtensa/boot/boot-uboot/Makefile +++ b/arch/xtensa/boot/boot-uboot/Makefile @@ -4,7 +4,11 @@ # for more details. # -UIMAGE_LOADADDR = 0xd0001000 +ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX +UIMAGE_LOADADDR = 0x00003000 +else +UIMAGE_LOADADDR = 0xd0003000 +endif UIMAGE_COMPRESSION = gzip $(obj)/../uImage: vmlinux.bin.gz FORCE diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h index e1f8ba4061ed..722553f17db3 100644 --- a/arch/xtensa/include/asm/initialize_mmu.h +++ b/arch/xtensa/include/asm/initialize_mmu.h @@ -23,6 +23,9 @@ #ifndef _XTENSA_INITIALIZE_MMU_H #define _XTENSA_INITIALIZE_MMU_H +#include <asm/pgtable.h> +#include <asm/vectors.h> + #ifdef __ASSEMBLY__ #define XTENSA_HWVERSION_RC_2009_0 230000 @@ -48,6 +51,110 @@ * (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RC_2009_0) */ +#if defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY +/* + * Have MMU v3 + */ + +#if !XCHAL_HAVE_VECBASE +# error "MMU v3 requires reloc vectors" +#endif + + movi a1, 0 + _call0 1f + _j 2f + + .align 4 +1: movi a2, 0x10000000 + movi a3, 0x18000000 + add a2, a2, a0 +9: bgeu a2, a3, 9b /* PC is out of the expected range */ + + /* Step 1: invalidate mapping at 0x40000000..0x5FFFFFFF. */ + + movi a2, 0x40000006 + idtlb a2 + iitlb a2 + isync + + /* Step 2: map 0x40000000..0x47FFFFFF to paddr containing this code + * and jump to the new mapping. + */ +#define CA_BYPASS (_PAGE_CA_BYPASS | _PAGE_HW_WRITE | _PAGE_HW_EXEC) +#define CA_WRITEBACK (_PAGE_CA_WB | _PAGE_HW_WRITE | _PAGE_HW_EXEC) + + srli a3, a0, 27 + slli a3, a3, 27 + addi a3, a3, CA_BYPASS + addi a7, a2, -1 + wdtlb a3, a7 + witlb a3, a7 + isync + + slli a4, a0, 5 + srli a4, a4, 5 + addi a5, a2, -6 + add a4, a4, a5 + jx a4 + + /* Step 3: unmap everything other than current area. + * Start at 0x60000000, wrap around, and end with 0x20000000 + */ +2: movi a4, 0x20000000 + add a5, a2, a4 +3: idtlb a5 + iitlb a5 + add a5, a5, a4 + bne a5, a2, 3b + + /* Step 4: Setup MMU with the old V2 mappings. */ + movi a6, 0x01000000 + wsr a6, ITLBCFG + wsr a6, DTLBCFG + isync + + movi a5, 0xd0000005 + movi a4, CA_WRITEBACK + wdtlb a4, a5 + witlb a4, a5 + + movi a5, 0xd8000005 + movi a4, CA_BYPASS + wdtlb a4, a5 + witlb a4, a5 + + movi a5, 0xe0000006 + movi a4, 0xf0000000 + CA_WRITEBACK + wdtlb a4, a5 + witlb a4, a5 + + movi a5, 0xf0000006 + movi a4, 0xf0000000 + CA_BYPASS + wdtlb a4, a5 + witlb a4, a5 + + isync + + /* Jump to self, using MMU v2 mappings. */ + movi a4, 1f + jx a4 + +1: + movi a2, VECBASE_RESET_VADDR + wsr a2, vecbase + + /* Step 5: remove temporary mapping. */ + idtlb a7 + iitlb a7 + isync + + movi a0, 0 + wsr a0, ptevaddr + rsync + +#endif /* defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && + XCHAL_HAVE_SPANNING_WAY */ + .endm #endif /*__ASSEMBLY__*/ diff --git a/arch/xtensa/include/asm/vectors.h b/arch/xtensa/include/asm/vectors.h new file mode 100644 index 000000000000..c52b656d0310 --- /dev/null +++ b/arch/xtensa/include/asm/vectors.h @@ -0,0 +1,125 @@ +/* + * arch/xtensa/include/asm/xchal_vaddr_remap.h + * + * Xtensa macros for MMU V3 Support. Deals with re-mapping the Virtual + * Memory Addresses from "Virtual == Physical" to their prevvious V2 MMU + * mappings (KSEG at 0xD0000000 and KIO at 0XF0000000). + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 - 2012 Tensilica Inc. + * + * Pete Delaney <piet@tensilica.com> + * Marc Gauthier <marc@tensilica.com + */ + +#ifndef _XTENSA_VECTORS_H +#define _XTENSA_VECTORS_H + +#include <variant/core.h> + +#if defined(CONFIG_MMU) + +/* Will Become VECBASE */ +#define VIRTUAL_MEMORY_ADDRESS 0xD0000000 + +/* Image Virtual Start Address */ +#define KERNELOFFSET 0xD0003000 + +#if defined(XCHAL_HAVE_PTP_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY + /* MMU v3 - XCHAL_HAVE_PTP_MMU == 1 */ + #define PHYSICAL_MEMORY_ADDRESS 0x00000000 + #define LOAD_MEMORY_ADDRESS 0x00003000 +#else + /* MMU V2 - XCHAL_HAVE_PTP_MMU == 0 */ + #define PHYSICAL_MEMORY_ADDRESS 0xD0000000 + #define LOAD_MEMORY_ADDRESS 0xD0003000 +#endif + +#else /* !defined(CONFIG_MMU) */ + /* MMU Not being used - Virtual == Physical */ + + /* VECBASE */ + #define VIRTUAL_MEMORY_ADDRESS 0x00002000 + + /* Location of the start of the kernel text, _start */ + #define KERNELOFFSET 0x00003000 + #define PHYSICAL_MEMORY_ADDRESS 0x00000000 + + /* Loaded just above possibly live vectors */ + #define LOAD_MEMORY_ADDRESS 0x00003000 + +#endif /* CONFIG_MMU */ + +#define XC_VADDR(offset) (VIRTUAL_MEMORY_ADDRESS + offset) +#define XC_PADDR(offset) (PHYSICAL_MEMORY_ADDRESS + offset) + +/* Used to set VECBASE register */ +#define VECBASE_RESET_VADDR VIRTUAL_MEMORY_ADDRESS + +#define RESET_VECTOR_VECOFS (XCHAL_RESET_VECTOR_VADDR - \ + VECBASE_RESET_VADDR) +#define RESET_VECTOR_VADDR XC_VADDR(RESET_VECTOR_VECOFS) + +#define RESET_VECTOR1_VECOFS (XCHAL_RESET_VECTOR1_VADDR - \ + VECBASE_RESET_VADDR) +#define RESET_VECTOR1_VADDR XC_VADDR(RESET_VECTOR1_VECOFS) + +#if XCHAL_HAVE_VECBASE + +#define USER_VECTOR_VADDR XC_VADDR(XCHAL_USER_VECOFS) +#define KERNEL_VECTOR_VADDR XC_VADDR(XCHAL_KERNEL_VECOFS) +#define DOUBLEEXC_VECTOR_VADDR XC_VADDR(XCHAL_DOUBLEEXC_VECOFS) +#define WINDOW_VECTORS_VADDR XC_VADDR(XCHAL_WINDOW_OF4_VECOFS) +#define INTLEVEL2_VECTOR_VADDR XC_VADDR(XCHAL_INTLEVEL2_VECOFS) +#define INTLEVEL3_VECTOR_VADDR XC_VADDR(XCHAL_INTLEVEL3_VECOFS) +#define INTLEVEL4_VECTOR_VADDR XC_VADDR(XCHAL_INTLEVEL4_VECOFS) +#define INTLEVEL5_VECTOR_VADDR XC_VADDR(XCHAL_INTLEVEL5_VECOFS) +#define INTLEVEL6_VECTOR_VADDR XC_VADDR(XCHAL_INTLEVEL6_VECOFS) + +#define DEBUG_VECTOR_VADDR XC_VADDR(XCHAL_DEBUG_VECOFS) + +#undef XCHAL_NMI_VECTOR_VADDR +#define XCHAL_NMI_VECTOR_VADDR XC_VADDR(XCHAL_NMI_VECOFS) + +#undef XCHAL_INTLEVEL7_VECTOR_VADDR +#define XCHAL_INTLEVEL7_VECTOR_VADDR XC_VADDR(XCHAL_INTLEVEL7_VECOFS) + +/* + * These XCHAL_* #defines from varian/core.h + * are not valid to use with V3 MMU. Non-XCHAL + * constants are defined above and should be used. + */ +#undef XCHAL_VECBASE_RESET_VADDR +#undef XCHAL_RESET_VECTOR0_VADDR +#undef XCHAL_USER_VECTOR_VADDR +#undef XCHAL_KERNEL_VECTOR_VADDR +#undef XCHAL_DOUBLEEXC_VECTOR_VADDR +#undef XCHAL_WINDOW_VECTORS_VADDR +#undef XCHAL_INTLEVEL2_VECTOR_VADDR +#undef XCHAL_INTLEVEL3_VECTOR_VADDR +#undef XCHAL_INTLEVEL4_VECTOR_VADDR +#undef XCHAL_INTLEVEL5_VECTOR_VADDR +#undef XCHAL_INTLEVEL6_VECTOR_VADDR +#undef XCHAL_DEBUG_VECTOR_VADDR +#undef XCHAL_NMI_VECTOR_VADDR +#undef XCHAL_INTLEVEL7_VECTOR_VADDR + +#else + +#define USER_VECTOR_VADDR XCHAL_USER_VECTOR_VADDR +#define KERNEL_VECTOR_VADDR XCHAL_KERNEL_VECTOR_VADDR +#define DOUBLEEXC_VECTOR_VADDR XCHAL_DOUBLEEXC_VECTOR_VADDR +#define WINDOW_VECTORS_VADDR XCHAL_WINDOW_VECTORS_VADDR +#define INTLEVEL2_VECTOR_VADDR XCHAL_INTLEVEL2_VECTOR_VADDR +#define INTLEVEL3_VECTOR_VADDR XCHAL_INTLEVEL3_VECTOR_VADDR +#define INTLEVEL4_VECTOR_VADDR XCHAL_INTLEVEL4_VECTOR_VADDR +#define INTLEVEL5_VECTOR_VADDR XCHAL_INTLEVEL5_VECTOR_VADDR +#define INTLEVEL6_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR +#define DEBUG_VECTOR_VADDR XCHAL_DEBUG_VECTOR_VADDR + +#endif + +#endif /* _XTENSA_VECTORS_H */ diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile index c3a59d992ac0..c433a56fbff9 100644 --- a/arch/xtensa/kernel/Makefile +++ b/arch/xtensa/kernel/Makefile @@ -12,6 +12,8 @@ obj-$(CONFIG_KGDB) += xtensa-stub.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_MODULES) += xtensa_ksyms.o module.o +AFLAGS_head.o += -mtext-section-literals + # In the Xtensa architecture, assembly generates literals which must always # precede the L32R instruction with a relative offset less than 256 kB. # Therefore, the .text and .literal section must be combined in parenthesis diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S index 4566683abc8d..ef12c0e6fa25 100644 --- a/arch/xtensa/kernel/head.S +++ b/arch/xtensa/kernel/head.S @@ -48,17 +48,36 @@ */ __HEAD + .begin no-absolute-literals + ENTRY(_start) - _j 2f + /* Preserve the pointer to the boot parameter list in EXCSAVE_1 */ + wsr a2, excsave1 + _j _SetupMMU + + .align 4 + .literal_position +.Lstartup: + .word _startup + .align 4 -1: .word _startup -2: l32r a0, 1b + .global _SetupMMU +_SetupMMU: + Offset = _SetupMMU - _start + +#ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX + initialize_mmu +#endif + .end no-absolute-literals + + l32r a0, .Lstartup jx a0 ENDPROC(_start) - .section .init.text, "ax" + __INIT + .literal_position ENTRY(_startup) @@ -67,10 +86,6 @@ ENTRY(_startup) movi a0, LOCKLEVEL wsr a0, ps - /* Preserve the pointer to the boot parameter list in EXCSAVE_1 */ - - wsr a2, excsave1 - /* Start with a fresh windowbase and windowstart. */ movi a1, 1 @@ -158,8 +173,6 @@ ENTRY(_startup) isync - initialize_mmu - /* Unpack data sections * * The linker script used to build the Linux kernel image @@ -207,6 +220,10 @@ ENTRY(_startup) ___flush_dcache_all a2 a3 #endif + memw + isync + ___invalidate_icache_all a2 a3 + isync /* Setup stack and enable window exceptions (keep irqs disabled) */ diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S index 82109b42e240..a7e1d0834c68 100644 --- a/arch/xtensa/kernel/vectors.S +++ b/arch/xtensa/kernel/vectors.S @@ -50,6 +50,7 @@ #include <asm/processor.h> #include <asm/page.h> #include <asm/thread_info.h> +#include <asm/vectors.h> #define WINDOW_VECTORS_SIZE 0x180 @@ -220,7 +221,7 @@ ENTRY(_DoubleExceptionVector) xsr a0, depc # get DEPC, save a0 - movi a3, XCHAL_WINDOW_VECTORS_VADDR + movi a3, WINDOW_VECTORS_VADDR _bltu a0, a3, .Lfixup addi a3, a3, WINDOW_VECTORS_SIZE _bgeu a0, a3, .Lfixup diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index 14695240536d..21acd11b5df2 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -18,6 +18,7 @@ #include <asm/page.h> #include <asm/thread_info.h> +#include <asm/vectors.h> #include <variant/core.h> #include <platform/hardware.h> OUTPUT_ARCH(xtensa) @@ -30,7 +31,7 @@ jiffies = jiffies_64; #endif #ifndef KERNELOFFSET -#define KERNELOFFSET 0xd0001000 +#define KERNELOFFSET 0xd0003000 #endif /* Note: In the following macros, it would be nice to specify only the @@ -185,16 +186,16 @@ SECTIONS SECTION_VECTOR (_WindowVectors_text, .WindowVectors.text, - XCHAL_WINDOW_VECTORS_VADDR, 4, + WINDOW_VECTORS_VADDR, 4, .dummy) SECTION_VECTOR (_DebugInterruptVector_literal, .DebugInterruptVector.literal, - XCHAL_DEBUG_VECTOR_VADDR - 4, + DEBUG_VECTOR_VADDR - 4, SIZEOF(.WindowVectors.text), .WindowVectors.text) SECTION_VECTOR (_DebugInterruptVector_text, .DebugInterruptVector.text, - XCHAL_DEBUG_VECTOR_VADDR, + DEBUG_VECTOR_VADDR, 4, .DebugInterruptVector.literal) #undef LAST @@ -202,7 +203,7 @@ SECTIONS #if XCHAL_EXCM_LEVEL >= 2 SECTION_VECTOR (_Level2InterruptVector_text, .Level2InterruptVector.text, - XCHAL_INTLEVEL2_VECTOR_VADDR, + INTLEVEL2_VECTOR_VADDR, SIZEOF(LAST), LAST) # undef LAST # define LAST .Level2InterruptVector.text @@ -210,7 +211,7 @@ SECTIONS #if XCHAL_EXCM_LEVEL >= 3 SECTION_VECTOR (_Level3InterruptVector_text, .Level3InterruptVector.text, - XCHAL_INTLEVEL3_VECTOR_VADDR, + INTLEVEL3_VECTOR_VADDR, SIZEOF(LAST), LAST) # undef LAST # define LAST .Level3InterruptVector.text @@ -218,7 +219,7 @@ SECTIONS #if XCHAL_EXCM_LEVEL >= 4 SECTION_VECTOR (_Level4InterruptVector_text, .Level4InterruptVector.text, - XCHAL_INTLEVEL4_VECTOR_VADDR, + INTLEVEL4_VECTOR_VADDR, SIZEOF(LAST), LAST) # undef LAST # define LAST .Level4InterruptVector.text @@ -226,7 +227,7 @@ SECTIONS #if XCHAL_EXCM_LEVEL >= 5 SECTION_VECTOR (_Level5InterruptVector_text, .Level5InterruptVector.text, - XCHAL_INTLEVEL5_VECTOR_VADDR, + INTLEVEL5_VECTOR_VADDR, SIZEOF(LAST), LAST) # undef LAST # define LAST .Level5InterruptVector.text @@ -234,39 +235,39 @@ SECTIONS #if XCHAL_EXCM_LEVEL >= 6 SECTION_VECTOR (_Level6InterruptVector_text, .Level6InterruptVector.text, - XCHAL_INTLEVEL6_VECTOR_VADDR, + INTLEVEL6_VECTOR_VADDR, SIZEOF(LAST), LAST) # undef LAST # define LAST .Level6InterruptVector.text #endif SECTION_VECTOR (_KernelExceptionVector_literal, .KernelExceptionVector.literal, - XCHAL_KERNEL_VECTOR_VADDR - 4, + KERNEL_VECTOR_VADDR - 4, SIZEOF(LAST), LAST) #undef LAST SECTION_VECTOR (_KernelExceptionVector_text, .KernelExceptionVector.text, - XCHAL_KERNEL_VECTOR_VADDR, + KERNEL_VECTOR_VADDR, 4, .KernelExceptionVector.literal) SECTION_VECTOR (_UserExceptionVector_literal, .UserExceptionVector.literal, - XCHAL_USER_VECTOR_VADDR - 4, + USER_VECTOR_VADDR - 4, SIZEOF(.KernelExceptionVector.text), .KernelExceptionVector.text) SECTION_VECTOR (_UserExceptionVector_text, .UserExceptionVector.text, - XCHAL_USER_VECTOR_VADDR, + USER_VECTOR_VADDR, 4, .UserExceptionVector.literal) SECTION_VECTOR (_DoubleExceptionVector_literal, .DoubleExceptionVector.literal, - XCHAL_DOUBLEEXC_VECTOR_VADDR - 16, + DOUBLEEXC_VECTOR_VADDR - 16, SIZEOF(.UserExceptionVector.text), .UserExceptionVector.text) SECTION_VECTOR (_DoubleExceptionVector_text, .DoubleExceptionVector.text, - XCHAL_DOUBLEEXC_VECTOR_VADDR, + DOUBLEEXC_VECTOR_VADDR, 32, .DoubleExceptionVector.literal) @@ -284,11 +285,26 @@ SECTIONS . = ALIGN(0x10); .bootstrap : { *(.bootstrap.literal .bootstrap.text .bootstrap.data) } - .ResetVector.text XCHAL_RESET_VECTOR_VADDR : + .ResetVector.text RESET_VECTOR_VADDR : { *(.ResetVector.text) } + + /* + * This is a remapped copy of the Secondary Reset Vector Code. + * It keeps gdb in sync with the PC after switching + * to the temporary mapping used while setting up + * the V2 MMU mappings for Linux. + * + * Only debug information about this section is put in the kernel image. + */ + .SecondaryResetVector.remapped_text 0x46000000 (INFO): + { + *(.SecondaryResetVector.remapped_text) + } + + .xt.lit : { *(.xt.lit) } .xt.prop : { *(.xt.prop) } diff --git a/arch/xtensa/mm/mmu.c b/arch/xtensa/mm/mmu.c index 0f77f9d3bb8b..a1077570e383 100644 --- a/arch/xtensa/mm/mmu.c +++ b/arch/xtensa/mm/mmu.c @@ -24,15 +24,19 @@ void __init paging_init(void) */ void __init init_mmu(void) { - /* Writing zeros to the <t>TLBCFG special registers ensure - * that valid values exist in the register. For existing - * PGSZID<w> fields, zero selects the first element of the - * page-size array. For nonexistent PGSZID<w> fields, zero is - * the best value to write. Also, when changing PGSZID<w> +#if !(XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY) + /* + * Writing zeros to the instruction and data TLBCFG special + * registers ensure that valid values exist in the register. + * + * For existing PGSZID<w> fields, zero selects the first element + * of the page-size array. For nonexistent PGSZID<w> fields, + * zero is the best value to write. Also, when changing PGSZID<w> * fields, the corresponding TLB must be flushed. */ set_itlbcfg_register(0); set_dtlbcfg_register(0); +#endif flush_tlb_all(); /* Set rasid register to a known value. */ |