diff options
Diffstat (limited to 'arch')
213 files changed, 4527 insertions, 1156 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5cdee4bc181d..09ebf0ba64fa 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -328,7 +328,7 @@ config ARCH_CLPS711X config ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" - select CPU_V6 + select CPU_V6K select GENERIC_CLOCKEVENTS select ARM_GIC select MIGHT_HAVE_PCI @@ -396,6 +396,7 @@ config ARCH_MXC select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO + select GENERIC_IRQ_CHIP select HAVE_SCHED_CLOCK help Support for Freescale MXC/iMX-based family of processors @@ -603,7 +604,6 @@ config ARCH_TEGRA select GENERIC_GPIO select HAVE_CLK select HAVE_SCHED_CLOCK - select ARCH_HAS_BARRIERS if CACHE_L2X0 select ARCH_HAS_CPUFREQ help This enables support for NVIDIA Tegra based systems (Tegra APX, @@ -630,6 +630,8 @@ config ARCH_PXA select TICK_ONESHOT select PLAT_PXA select SPARSE_IRQ + select AUTO_ZRELADDR + select MULTI_IRQ_HANDLER help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. @@ -768,6 +770,7 @@ config ARCH_S5PV210 bool "Samsung S5PV210/S5PC110" select CPU_V7 select ARCH_SPARSEMEM_ENABLE + select ARCH_HAS_HOLES_MEMORYMODEL select GENERIC_GPIO select HAVE_CLK select CLKDEV_LOOKUP @@ -786,6 +789,7 @@ config ARCH_EXYNOS4 bool "Samsung EXYNOS4" select CPU_V7 select ARCH_SPARSEMEM_ENABLE + select ARCH_HAS_HOLES_MEMORYMODEL select GENERIC_GPIO select HAVE_CLK select CLKDEV_LOOKUP diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 7bdd91766d65..3227ca952a12 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -38,12 +38,6 @@ static DEFINE_SPINLOCK(irq_controller_lock); /* Address of GIC 0 CPU interface */ void __iomem *gic_cpu_base_addr __read_mostly; -struct gic_chip_data { - unsigned int irq_offset; - void __iomem *dist_base; - void __iomem *cpu_base; -}; - /* * Supported arch specific GIC irq extension. * Default make them NULL. diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 5a6ff7c605df..db2cb7d180dc 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -22,6 +22,8 @@ CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_MXS=y +CONFIG_MACH_MX23EVK=y +CONFIG_MACH_MX28EVK=y CONFIG_MACH_STMP378X_DEVB=y CONFIG_MACH_TX28=y # CONFIG_ARM_THUMB is not set diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index a5cce242a775..97d31a4663da 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -11,12 +11,12 @@ CONFIG_ARCH_U8500=y CONFIG_UX500_SOC_DB5500=y CONFIG_UX500_SOC_DB8500=y CONFIG_MACH_U8500=y +CONFIG_MACH_SNOWBALL=y CONFIG_MACH_U5500=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_NR_CPUS=2 -CONFIG_HOTPLUG_CPU=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" @@ -25,8 +25,13 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_NETFILTER=y CONFIG_PHONET=y -CONFIG_PHONET_PIPECTRLR=y # CONFIG_WIRELESS is not set CONFIG_CAIF=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" @@ -35,6 +40,13 @@ CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_MISC_DEVICES=y CONFIG_AB8500_PWM=y CONFIG_SENSORS_BH1780=y +CONFIG_NETDEVICES=y +CONFIG_SMSC_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_SMSC911X=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -49,9 +61,9 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_AB8500_PONKEY=y # CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_NOMADIK=y CONFIG_I2C=y @@ -64,14 +76,19 @@ CONFIG_GPIO_TC3589X=y CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y CONFIG_AB8500_CORE=y -CONFIG_REGULATOR=y CONFIG_REGULATOR_AB8500=y # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_MUSB_PIO_ONLY=y +CONFIG_USB_GADGET=y +CONFIG_AB8500_USB=y CONFIG_MMC=y +CONFIG_MMC_CLKGATE=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y @@ -79,7 +96,6 @@ CONFIG_RTC_DRV_PL031=y CONFIG_DMADEVICES=y CONFIG_STE_DMA40=y CONFIG_STAGING=y -# CONFIG_STAGING_EXCLUDE_BUILD is not set CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y @@ -91,6 +107,8 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_CONFIGFS_FS=m # CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_MAGIC_SYSRQ=y @@ -99,7 +117,5 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h index 0691f9dcc500..435d3f86c708 100644 --- a/arch/arm/include/asm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -41,6 +41,12 @@ void gic_secondary_init(unsigned int); void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); void gic_enable_ppi(unsigned int); + +struct gic_chip_data { + unsigned int irq_offset; + void __iomem *dist_base; + void __iomem *cpu_base; +}; #endif #endif diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h index 2721a5814cb9..5a526afb5f18 100644 --- a/arch/arm/include/asm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -23,6 +23,7 @@ struct pt_regs; extern void migrate_irqs(void); extern void asm_do_IRQ(unsigned int, struct pt_regs *); +void handle_IRQ(unsigned int, struct pt_regs *); void init_IRQ(void); #endif diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 0f928a131af8..de3dcab8610b 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -67,12 +67,12 @@ int arch_show_interrupts(struct seq_file *p, int prec) } /* - * do_IRQ handles all hardware IRQ's. Decoded IRQs should not - * come via this function. Instead, they should provide their - * own 'handler' + * handle_IRQ handles all hardware IRQ's. Decoded IRQs should + * not come via this function. Instead, they should provide their + * own 'handler'. Used by platform code implementing C-based 1st + * level decoding. */ -asmlinkage void __exception_irq_entry -asm_do_IRQ(unsigned int irq, struct pt_regs *regs) +void handle_IRQ(unsigned int irq, struct pt_regs *regs) { struct pt_regs *old_regs = set_irq_regs(regs); @@ -97,6 +97,15 @@ asm_do_IRQ(unsigned int irq, struct pt_regs *regs) set_irq_regs(old_regs); } +/* + * asm_do_IRQ is the interface to be used from assembly code. + */ +asmlinkage void __exception_irq_entry +asm_do_IRQ(unsigned int irq, struct pt_regs *regs) +{ + handle_IRQ(irq, regs); +} + void set_irq_flags(unsigned int irq, unsigned int iflags) { unsigned long clr = 0, set = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN; diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index 85e6390795ac..3e7d1496cb47 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -169,6 +169,8 @@ static struct platform_device *cns3420_pdevs[] __initdata = { static void __init cns3420_init(void) { + cns3xxx_l2x0_init(); + platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs)); cns3xxx_ahci_init(); diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index da30078a80c1..941a308e1253 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -16,6 +16,7 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> #include <asm/hardware/gic.h> +#include <asm/hardware/cache-l2x0.h> #include <mach/cns3xxx.h> #include "core.h" @@ -244,3 +245,45 @@ static void __init cns3xxx_timer_init(void) struct sys_timer cns3xxx_timer = { .init = cns3xxx_timer_init, }; + +#ifdef CONFIG_CACHE_L2X0 + +void __init cns3xxx_l2x0_init(void) +{ + void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K); + u32 val; + + if (WARN_ON(!base)) + return; + + /* + * Tag RAM Control register + * + * bit[10:8] - 1 cycle of write accesses latency + * bit[6:4] - 1 cycle of read accesses latency + * bit[3:0] - 1 cycle of setup latency + * + * 1 cycle of latency for setup, read and write accesses + */ + val = readl(base + L2X0_TAG_LATENCY_CTRL); + val &= 0xfffff888; + writel(val, base + L2X0_TAG_LATENCY_CTRL); + + /* + * Data RAM Control register + * + * bit[10:8] - 1 cycles of write accesses latency + * bit[6:4] - 1 cycles of read accesses latency + * bit[3:0] - 1 cycle of setup latency + * + * 1 cycle of latency for setup, read and write accesses + */ + val = readl(base + L2X0_DATA_LATENCY_CTRL); + val &= 0xfffff888; + writel(val, base + L2X0_DATA_LATENCY_CTRL); + + /* 32 KiB, 8-way, parity disable */ + l2x0_init(base, 0x00540000, 0xfe000fff); +} + +#endif /* CONFIG_CACHE_L2X0 */ diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h index ffeb3a8b73ba..fcd225343c61 100644 --- a/arch/arm/mach-cns3xxx/core.h +++ b/arch/arm/mach-cns3xxx/core.h @@ -13,6 +13,12 @@ extern struct sys_timer cns3xxx_timer; +#ifdef CONFIG_CACHE_L2X0 +void __init cns3xxx_l2x0_init(void); +#else +static inline void cns3xxx_l2x0_init(void) {} +#endif /* CONFIG_CACHE_L2X0 */ + void __init cns3xxx_map_io(void); void __init cns3xxx_init_irq(void); void cns3xxx_power_off(void); diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 29671ef07152..bd5394537c88 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -1117,6 +1117,8 @@ static __init int da850_evm_init_cpufreq(void) static __init int da850_evm_init_cpufreq(void) { return 0; } #endif +#define DA850EVM_SATA_REFCLKPN_RATE (100 * 1000 * 1000) + static __init void da850_evm_init(void) { int ret; @@ -1237,6 +1239,11 @@ static __init void da850_evm_init(void) if (ret) pr_warning("da850_evm_init: spi 1 registration failed: %d\n", ret); + + ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE); + if (ret) + pr_warning("da850_evm_init: sata registration failed: %d\n", + ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index ae653194b645..00861139101d 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -44,7 +44,7 @@ static void __clk_enable(struct clk *clk) __clk_enable(clk->parent); if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, - PSC_STATE_ENABLE); + true, clk->flags); } static void __clk_disable(struct clk *clk) @@ -54,8 +54,7 @@ static void __clk_disable(struct clk *clk) if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) && (clk->flags & CLK_PSC)) davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, - (clk->flags & PSC_SWRSTDISABLE) ? - PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE); + false, clk->flags); if (clk->parent) __clk_disable(clk->parent); } @@ -239,8 +238,7 @@ static int __init clk_disable_unused(void) pr_debug("Clocks: disable unused %s\n", ck->name); davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc, - (ck->flags & PSC_SWRSTDISABLE) ? - PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE); + false, ck->flags); } spin_unlock_irq(&clockfw_lock); diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index 50b2482e0ba2..a705f367a84d 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -111,6 +111,7 @@ struct clk { #define CLK_PLL BIT(4) /* PLL-derived clock */ #define PRE_PLL BIT(5) /* source is before PLL mult/div */ #define PSC_SWRSTDISABLE BIT(6) /* Disable state is SwRstDisable */ +#define PSC_FORCE BIT(7) /* Force module state transtition */ #define CLK(dev, con, ck) \ { \ diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 133aac405853..935dbed5c541 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -58,6 +58,7 @@ static struct pll_data pll0_data = { static struct clk ref_clk = { .name = "ref_clk", .rate = DA850_REF_FREQ, + .set_rate = davinci_simple_set_rate, }; static struct clk pll0_clk = { @@ -373,6 +374,14 @@ static struct clk spi1_clk = { .flags = DA850_CLK_ASYNC3, }; +static struct clk sata_clk = { + .name = "sata", + .parent = &pll0_sysclk2, + .lpsc = DA850_LPSC1_SATA, + .gpsc = 1, + .flags = PSC_FORCE, +}; + static struct clk_lookup da850_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "pll0", &pll0_clk), @@ -419,6 +428,7 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "usb20", &usb20_clk), CLK("spi_davinci.0", NULL, &spi0_clk), CLK("spi_davinci.1", NULL, &spi1_clk), + CLK("ahci", NULL, &sata_clk), CLK(NULL, NULL, NULL), }; diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index fc4e98ea7543..2f7e719636f1 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -14,6 +14,8 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/serial_8250.h> +#include <linux/ahci_platform.h> +#include <linux/clk.h> #include <mach/cputype.h> #include <mach/common.h> @@ -33,6 +35,7 @@ #define DA8XX_SPI0_BASE 0x01c41000 #define DA830_SPI1_BASE 0x01e12000 #define DA8XX_LCD_CNTRL_BASE 0x01e13000 +#define DA850_SATA_BASE 0x01e18000 #define DA850_MMCSD1_BASE 0x01e1b000 #define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000 #define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000 @@ -842,3 +845,126 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info, return platform_device_register(&da8xx_spi_device[instance]); } + +#ifdef CONFIG_ARCH_DAVINCI_DA850 + +static struct resource da850_sata_resources[] = { + { + .start = DA850_SATA_BASE, + .end = DA850_SATA_BASE + 0x1fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DA850_SATAINT, + .flags = IORESOURCE_IRQ, + }, +}; + +/* SATA PHY Control Register offset from AHCI base */ +#define SATA_P0PHYCR_REG 0x178 + +#define SATA_PHY_MPY(x) ((x) << 0) +#define SATA_PHY_LOS(x) ((x) << 6) +#define SATA_PHY_RXCDR(x) ((x) << 10) +#define SATA_PHY_RXEQ(x) ((x) << 13) +#define SATA_PHY_TXSWING(x) ((x) << 19) +#define SATA_PHY_ENPLL(x) ((x) << 31) + +static struct clk *da850_sata_clk; +static unsigned long da850_sata_refclkpn; + +/* Supported DA850 SATA crystal frequencies */ +#define KHZ_TO_HZ(freq) ((freq) * 1000) +static unsigned long da850_sata_xtal[] = { + KHZ_TO_HZ(300000), + KHZ_TO_HZ(250000), + 0, /* Reserved */ + KHZ_TO_HZ(187500), + KHZ_TO_HZ(150000), + KHZ_TO_HZ(125000), + KHZ_TO_HZ(120000), + KHZ_TO_HZ(100000), + KHZ_TO_HZ(75000), + KHZ_TO_HZ(60000), +}; + +static int da850_sata_init(struct device *dev, void __iomem *addr) +{ + int i, ret; + unsigned int val; + + da850_sata_clk = clk_get(dev, NULL); + if (IS_ERR(da850_sata_clk)) + return PTR_ERR(da850_sata_clk); + + ret = clk_enable(da850_sata_clk); + if (ret) + goto err0; + + /* Enable SATA clock receiver */ + val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG)); + val &= ~BIT(0); + __raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG)); + + /* Get the multiplier needed for 1.5GHz PLL output */ + for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++) + if (da850_sata_xtal[i] == da850_sata_refclkpn) + break; + + if (i == ARRAY_SIZE(da850_sata_xtal)) { + ret = -EINVAL; + goto err1; + } + + val = SATA_PHY_MPY(i + 1) | + SATA_PHY_LOS(1) | + SATA_PHY_RXCDR(4) | + SATA_PHY_RXEQ(1) | + SATA_PHY_TXSWING(3) | + SATA_PHY_ENPLL(1); + + __raw_writel(val, addr + SATA_P0PHYCR_REG); + + return 0; + +err1: + clk_disable(da850_sata_clk); +err0: + clk_put(da850_sata_clk); + return ret; +} + +static void da850_sata_exit(struct device *dev) +{ + clk_disable(da850_sata_clk); + clk_put(da850_sata_clk); +} + +static struct ahci_platform_data da850_sata_pdata = { + .init = da850_sata_init, + .exit = da850_sata_exit, +}; + +static u64 da850_sata_dmamask = DMA_BIT_MASK(32); + +static struct platform_device da850_sata_device = { + .name = "ahci", + .id = -1, + .dev = { + .platform_data = &da850_sata_pdata, + .dma_mask = &da850_sata_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(da850_sata_resources), + .resource = da850_sata_resources, +}; + +int __init da850_register_sata(unsigned long refclkpn) +{ + da850_sata_refclkpn = refclkpn; + if (!da850_sata_refclkpn) + return -EINVAL; + + return platform_device_register(&da850_sata_device); +} +#endif diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index ad64da713fc8..eaca7d8b9d68 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -57,6 +57,7 @@ extern unsigned int da850_max_speed; #define DA8XX_SYSCFG1_BASE (IO_PHYS + 0x22C000) #define DA8XX_SYSCFG1_VIRT(x) (da8xx_syscfg1_base + (x)) #define DA8XX_DEEPSLEEP_REG 0x8 +#define DA8XX_PWRDN_REG 0x18 #define DA8XX_PSC0_BASE 0x01c10000 #define DA8XX_PLL0_BASE 0x01c11000 @@ -89,6 +90,7 @@ int da850_register_cpufreq(char *async_clk); int da8xx_register_cpuidle(void); void __iomem * __init da8xx_get_mem_ctlr(void); int da850_register_pm(struct platform_device *pdev); +int __init da850_register_sata(unsigned long refclkpn); extern struct platform_device da8xx_serial_device; extern struct emac_platform_data da8xx_emac_pdata; diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 1110fdd77ba4..47fd0bc3d3e7 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -244,12 +244,13 @@ #define PSC_STATE_ENABLE 3 #define MDSTAT_STATE_MASK 0x1f +#define MDCTL_FORCE BIT(31) #ifndef __ASSEMBLER__ extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id); extern void davinci_psc_config(unsigned int domain, unsigned int ctlr, - unsigned int id, u32 next_state); + unsigned int id, bool enable, u32 flags); #endif diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index a41580400701..1fb6bdff38c1 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -25,6 +25,8 @@ #include <mach/cputype.h> #include <mach/psc.h> +#include "clock.h" + /* Return nonzero iff the domain's clock is active */ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) { @@ -48,11 +50,12 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) /* Enable or disable a PSC domain */ void davinci_psc_config(unsigned int domain, unsigned int ctlr, - unsigned int id, u32 next_state) + unsigned int id, bool enable, u32 flags) { u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; void __iomem *psc_base; struct davinci_soc_info *soc_info = &davinci_soc_info; + u32 next_state = PSC_STATE_ENABLE; if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { pr_warning("PSC: Bad psc data: 0x%x[%d]\n", @@ -62,9 +65,18 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K); + if (!enable) { + if (flags & PSC_SWRSTDISABLE) + next_state = PSC_STATE_SWRSTDISABLE; + else + next_state = PSC_STATE_DISABLE; + } + mdctl = __raw_readl(psc_base + MDCTL + 4 * id); mdctl &= ~MDSTAT_STATE_MASK; mdctl |= next_state; + if (flags & PSC_FORCE) + mdctl |= MDCTL_FORCE; __raw_writel(mdctl, psc_base + MDCTL + 4 * id); pdstat = __raw_readl(psc_base + PDSTAT); diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index ae433a052df6..0c77ab99fa16 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -16,7 +16,8 @@ config CPU_EXYNOS4210 Enable EXYNOS4210 CPU support config EXYNOS4_MCT - bool "Kernel timer support by MCT" + bool + default y help Use MCT (Multi Core Timer) as kernel timers @@ -25,6 +26,11 @@ config EXYNOS4_DEV_AHCI help Compile in platform device definitions for AHCI +config EXYNOS4_SETUP_FIMD0 + bool + help + Common setup code for FIMD0. + config EXYNOS4_DEV_PD bool help @@ -35,6 +41,11 @@ config EXYNOS4_DEV_SYSMMU help Common setup code for SYSTEM MMU in EXYNOS4 +config EXYNOS4_DEV_DWMCI + bool + help + Compile in platform device definitions for DWMCI + config EXYNOS4_SETUP_I2C1 bool help @@ -103,6 +114,7 @@ menu "EXYNOS4 Machines" config MACH_SMDKC210 bool "SMDKC210" select CPU_EXYNOS4210 + select S5P_DEV_FIMD0 select S3C_DEV_RTC select S3C_DEV_WDT select S3C_DEV_I2C1 @@ -114,6 +126,7 @@ config MACH_SMDKC210 select SAMSUNG_DEV_BACKLIGHT select EXYNOS4_DEV_PD select EXYNOS4_DEV_SYSMMU + select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_SDHCI help @@ -122,6 +135,7 @@ config MACH_SMDKC210 config MACH_SMDKV310 bool "SMDKV310" select CPU_EXYNOS4210 + select S5P_DEV_FIMD0 select S3C_DEV_RTC select S3C_DEV_WDT select S3C_DEV_I2C1 @@ -130,10 +144,12 @@ config MACH_SMDKV310 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select SAMSUNG_DEV_BACKLIGHT + select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_KEYPAD select EXYNOS4_DEV_PD select SAMSUNG_DEV_PWM select EXYNOS4_DEV_SYSMMU + select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_KEYPAD select EXYNOS4_SETUP_SDHCI @@ -157,13 +173,22 @@ config MACH_ARMLEX4210 config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" select CPU_EXYNOS4210 + select S5P_GPIO_INT + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_FIMC3 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_I2C1 + select S3C_DEV_I2C3 select S3C_DEV_I2C5 + select S5P_DEV_MFC select S5P_DEV_ONENAND + select EXYNOS4_DEV_PD select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI help @@ -180,13 +205,16 @@ config MACH_NURI select S3C_DEV_I2C1 select S3C_DEV_I2C3 select S3C_DEV_I2C5 + select S5P_DEV_MFC select S5P_DEV_USB_EHCI + select EXYNOS4_DEV_PD select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select SAMSUNG_DEV_PWM + select SAMSUNG_DEV_ADC help Machine support for Samsung Mobile NURI Board. diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index 1366995d8c2c..b7fe1d7b0b1f 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -13,18 +13,13 @@ obj- := # Core support for EXYNOS4 system obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o -obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o +obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o pmu.o obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o -ifeq ($(CONFIG_EXYNOS4_MCT),y) -obj-y += mct.o -else -obj-y += time.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o -endif +obj-$(CONFIG_EXYNOS4_MCT) += mct.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o @@ -42,8 +37,10 @@ obj-y += dev-audio.o obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o +obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o +obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o obj-$(CONFIG_EXYNOS4_SETUP_I2C2) += setup-i2c2.o obj-$(CONFIG_EXYNOS4_SETUP_I2C3) += setup-i2c3.o diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c index 66494f28bbef..851dea018578 100644 --- a/arch/arm/mach-exynos4/clock.c +++ b/arch/arm/mach-exynos4/clock.c @@ -528,6 +528,11 @@ static struct clk init_clocks_off[] = { .enable = exynos4_clk_ip_image_ctrl, .ctrlbit = (1 << 0), }, { + .name = "mfc", + .devname = "s5p-mfc", + .enable = exynos4_clk_ip_mfc_ctrl, + .ctrlbit = (1 << 0), + }, { .name = "i2c", .devname = "s3c2440-i2c.0", .parent = &clk_aclk_100.clk, @@ -731,6 +736,52 @@ static struct clksrc_sources clkset_mout_g2d = { .nr_sources = ARRAY_SIZE(clkset_mout_g2d_list), }; +static struct clk *clkset_mout_mfc0_list[] = { + [0] = &clk_mout_mpll.clk, + [1] = &clk_sclk_apll.clk, +}; + +static struct clksrc_sources clkset_mout_mfc0 = { + .sources = clkset_mout_mfc0_list, + .nr_sources = ARRAY_SIZE(clkset_mout_mfc0_list), +}; + +static struct clksrc_clk clk_mout_mfc0 = { + .clk = { + .name = "mout_mfc0", + }, + .sources = &clkset_mout_mfc0, + .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 0, .size = 1 }, +}; + +static struct clk *clkset_mout_mfc1_list[] = { + [0] = &clk_mout_epll.clk, + [1] = &clk_sclk_vpll.clk, +}; + +static struct clksrc_sources clkset_mout_mfc1 = { + .sources = clkset_mout_mfc1_list, + .nr_sources = ARRAY_SIZE(clkset_mout_mfc1_list), +}; + +static struct clksrc_clk clk_mout_mfc1 = { + .clk = { + .name = "mout_mfc1", + }, + .sources = &clkset_mout_mfc1, + .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 4, .size = 1 }, +}; + +static struct clk *clkset_mout_mfc_list[] = { + [0] = &clk_mout_mfc0.clk, + [1] = &clk_mout_mfc1.clk, +}; + +static struct clksrc_sources clkset_mout_mfc = { + .sources = clkset_mout_mfc_list, + .nr_sources = ARRAY_SIZE(clkset_mout_mfc_list), +}; + static struct clksrc_clk clk_dout_mmc0 = { .clk = { .name = "dout_mmc0", @@ -974,6 +1025,14 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_IMAGE, .shift = 0, .size = 4 }, }, { .clk = { + .name = "sclk_mfc", + .devname = "s5p-mfc", + }, + .sources = &clkset_mout_mfc, + .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 8, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_MFC, .shift = 0, .size = 4 }, + }, { + .clk = { .name = "sclk_mmc", .devname = "s3c-sdhci.0", .parent = &clk_dout_mmc0.clk, @@ -1049,6 +1108,8 @@ static struct clksrc_clk *sysclks[] = { &clk_dout_mmc2, &clk_dout_mmc3, &clk_dout_mmc4, + &clk_mout_mfc0, + &clk_mout_mfc1, }; static int xtal_rate; diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c index bfd621460abf..2d8a40c9e6e5 100644 --- a/arch/arm/mach-exynos4/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -16,12 +16,16 @@ #include <asm/proc-fns.h> #include <asm/hardware/cache-l2x0.h> +#include <asm/hardware/gic.h> #include <plat/cpu.h> #include <plat/clock.h> +#include <plat/devs.h> #include <plat/exynos4.h> +#include <plat/adc-core.h> #include <plat/sdhci.h> #include <plat/devs.h> +#include <plat/fb-core.h> #include <plat/fimc-core.h> #include <plat/iic-core.h> @@ -103,7 +107,17 @@ static struct map_desc exynos4_iodesc[] __initdata = { .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY), .length = SZ_4K, .type = MT_DEVICE, - } + }, { + .virtual = (unsigned long)S5P_VA_GIC_CPU, + .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_CPU), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GIC_DIST, + .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST), + .length = SZ_64K, + .type = MT_DEVICE, + }, }; static void exynos4_idle(void) @@ -129,6 +143,8 @@ void __init exynos4_map_io(void) exynos4_default_sdhci2(); exynos4_default_sdhci3(); + s3c_adc_setname("samsung-adc-v3"); + s3c_fimc_setname(0, "exynos4-fimc"); s3c_fimc_setname(1, "exynos4-fimc"); s3c_fimc_setname(2, "exynos4-fimc"); @@ -138,6 +154,8 @@ void __init exynos4_map_io(void) s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); s3c_i2c2_setname("s3c2440-i2c"); + + s5p_fb_setname(0, "exynos4-fb"); } void __init exynos4_init_clocks(int xtal) @@ -150,22 +168,23 @@ void __init exynos4_init_clocks(int xtal) exynos4_setup_clocks(); } +static void exynos4_gic_irq_eoi(struct irq_data *d) +{ + struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); + + gic_data->cpu_base = S5P_VA_GIC_CPU + + (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); +} + void __init exynos4_init_irq(void) { int irq; - gic_init(0, IRQ_LOCALTIMER, S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); + gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); + gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi; for (irq = 0; irq < MAX_COMBINER_NR; irq++) { - /* - * From SPI(0) to SPI(39) and SPI(51), SPI(53) are - * connected to the interrupt combiner. These irqs - * should be initialized to support cascade interrupt. - */ - if ((irq >= 40) && !(irq == 51) && !(irq == 53)) - continue; - combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), COMBINER_IRQ(irq, 0)); combiner_cascade_irq(irq, IRQ_SPI(irq)); diff --git a/arch/arm/mach-exynos4/dev-audio.c b/arch/arm/mach-exynos4/dev-audio.c index 983069a53239..5a9f9c2e53bf 100644 --- a/arch/arm/mach-exynos4/dev-audio.c +++ b/arch/arm/mach-exynos4/dev-audio.c @@ -21,6 +21,7 @@ #include <mach/map.h> #include <mach/dma.h> #include <mach/irqs.h> +#include <mach/regs-audss.h> static const char *rclksrc[] = { [0] = "busclk", @@ -55,6 +56,7 @@ static struct s3c_audio_pdata i2sv5_pdata = { .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR, .src_clk = rclksrc, + .idma_addr = EXYNOS4_AUDSS_INT_MEM, }, }, }; diff --git a/arch/arm/mach-exynos4/dev-dwmci.c b/arch/arm/mach-exynos4/dev-dwmci.c new file mode 100644 index 000000000000..b025db4bf602 --- /dev/null +++ b/arch/arm/mach-exynos4/dev-dwmci.c @@ -0,0 +1,82 @@ +/* + * linux/arch/arm/mach-exynos4/dev-dwmci.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Platform device for Synopsys DesignWare Mobile Storage IP + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/mmc/dw_mmc.h> + +#include <plat/devs.h> + +#include <mach/map.h> + +static int exynos4_dwmci_get_bus_wd(u32 slot_id) +{ + return 4; +} + +static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data) +{ + return 0; +} + +static struct resource exynos4_dwmci_resource[] = { + [0] = { + .start = EXYNOS4_PA_DWMCI, + .end = EXYNOS4_PA_DWMCI + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_DWMCI, + .end = IRQ_DWMCI, + .flags = IORESOURCE_IRQ, + } +}; + +static struct dw_mci_board exynos4_dwci_pdata = { + .num_slots = 1, + .quirks = DW_MCI_QUIRK_BROKEN_CARD_DETECTION, + .bus_hz = 80 * 1000 * 1000, + .detect_delay_ms = 200, + .init = exynos4_dwmci_init, + .get_bus_wd = exynos4_dwmci_get_bus_wd, +}; + +static u64 exynos4_dwmci_dmamask = DMA_BIT_MASK(32); + +struct platform_device exynos4_device_dwmci = { + .name = "dw_mmc", + .id = -1, + .num_resources = ARRAY_SIZE(exynos4_dwmci_resource), + .resource = exynos4_dwmci_resource, + .dev = { + .dma_mask = &exynos4_dwmci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &exynos4_dwci_pdata, + }, +}; + +void __init exynos4_dwmci_set_platdata(struct dw_mci_board *pd) +{ + struct dw_mci_board *npd; + + npd = s3c_set_platdata(pd, sizeof(struct dw_mci_board), + &exynos4_device_dwmci); + + if (!npd->init) + npd->init = exynos4_dwmci_init; + if (!npd->get_bus_wd) + npd->get_bus_wd = exynos4_dwmci_get_bus_wd; +} diff --git a/arch/arm/mach-exynos4/hotplug.c b/arch/arm/mach-exynos4/hotplug.c index 2b5909e2ccd3..7490789784c9 100644 --- a/arch/arm/mach-exynos4/hotplug.c +++ b/arch/arm/mach-exynos4/hotplug.c @@ -13,9 +13,12 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/smp.h> +#include <linux/io.h> #include <asm/cacheflush.h> +#include <mach/regs-pmu.h> + extern volatile int pen_release; static inline void cpu_enter_lowpower(void) @@ -58,12 +61,12 @@ static inline void cpu_leave_lowpower(void) static inline void platform_do_lowpower(unsigned int cpu, int *spurious) { - /* - * there is no power-control hardware on this platform, so all - * we can do is put the core into WFI; this is safe as the calling - * code will have already disabled interrupts - */ for (;;) { + + /* make cpu1 to be turned off at next WFI command */ + if (cpu == 1) + __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION); + /* * here's the WFI */ diff --git a/arch/arm/mach-exynos4/include/mach/dwmci.h b/arch/arm/mach-exynos4/include/mach/dwmci.h new file mode 100644 index 000000000000..7ce657459cc0 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/dwmci.h @@ -0,0 +1,20 @@ +/* linux/arch/arm/mach-exynos4/include/mach/dwmci.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Synopsys DesignWare Mobile Storage for EXYNOS4210 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_ARCH_DWMCI_H +#define __ASM_ARM_ARCH_DWMCI_H __FILE__ + +#include <linux/mmc/dw_mmc.h> + +extern void exynos4_dwmci_set_platdata(struct dw_mci_board *pd); + +#endif /* __ASM_ARM_ARCH_DWMCI_H */ diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S index d8f38c2e5654..d7a1e281ce7a 100644 --- a/arch/arm/mach-exynos4/include/mach/entry-macro.S +++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S @@ -10,6 +10,7 @@ */ #include <mach/hardware.h> +#include <mach/map.h> #include <asm/hardware/gic.h> .macro disable_fiq @@ -18,6 +19,10 @@ .macro get_irqnr_preamble, base, tmp ldr \base, =gic_cpu_base_addr ldr \base, [\base] + mrc p15, 0, \tmp, c0, c0, 5 + and \tmp, \tmp, #3 + cmp \tmp, #1 + addeq \base, \base, #EXYNOS4_GIC_BANK_OFFSET .endm .macro arch_ret_to_user, tmp1, tmp2 @@ -75,10 +80,4 @@ /* As above, this assumes that irqstat and base are preserved.. */ .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 .endm diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h index 5d037301d21a..934d2a493982 100644 --- a/arch/arm/mach-exynos4/include/mach/irqs.h +++ b/arch/arm/mach-exynos4/include/mach/irqs.h @@ -19,40 +19,105 @@ #define IRQ_PPI(x) S5P_IRQ(x+16) -#define IRQ_LOCALTIMER IRQ_PPI(13) - /* SPI: Shared Peripheral Interrupt */ #define IRQ_SPI(x) S5P_IRQ(x+32) -#define IRQ_MCT1 IRQ_SPI(35) - -#define IRQ_EINT0 IRQ_SPI(40) -#define IRQ_EINT1 IRQ_SPI(41) -#define IRQ_EINT2 IRQ_SPI(42) -#define IRQ_EINT3 IRQ_SPI(43) -#define IRQ_USB_HSOTG IRQ_SPI(44) -#define IRQ_USB_HOST IRQ_SPI(45) -#define IRQ_MODEM_IF IRQ_SPI(46) -#define IRQ_ROTATOR IRQ_SPI(47) -#define IRQ_JPEG IRQ_SPI(48) -#define IRQ_2D IRQ_SPI(49) -#define IRQ_PCIE IRQ_SPI(50) -#define IRQ_MCT0 IRQ_SPI(51) -#define IRQ_MFC IRQ_SPI(52) -#define IRQ_AUDIO_SS IRQ_SPI(54) -#define IRQ_AC97 IRQ_SPI(55) -#define IRQ_SPDIF IRQ_SPI(56) -#define IRQ_KEYPAD IRQ_SPI(57) -#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(58) -#define IRQ_SLIMBUS IRQ_SPI(59) -#define IRQ_PMU IRQ_SPI(60) -#define IRQ_TSI IRQ_SPI(61) -#define IRQ_SATA IRQ_SPI(62) -#define IRQ_GPS IRQ_SPI(63) +#define IRQ_EINT0 IRQ_SPI(16) +#define IRQ_EINT1 IRQ_SPI(17) +#define IRQ_EINT2 IRQ_SPI(18) +#define IRQ_EINT3 IRQ_SPI(19) +#define IRQ_EINT4 IRQ_SPI(20) +#define IRQ_EINT5 IRQ_SPI(21) +#define IRQ_EINT6 IRQ_SPI(22) +#define IRQ_EINT7 IRQ_SPI(23) +#define IRQ_EINT8 IRQ_SPI(24) +#define IRQ_EINT9 IRQ_SPI(25) +#define IRQ_EINT10 IRQ_SPI(26) +#define IRQ_EINT11 IRQ_SPI(27) +#define IRQ_EINT12 IRQ_SPI(28) +#define IRQ_EINT13 IRQ_SPI(29) +#define IRQ_EINT14 IRQ_SPI(30) +#define IRQ_EINT15 IRQ_SPI(31) +#define IRQ_EINT16_31 IRQ_SPI(32) + +#define IRQ_PDMA0 IRQ_SPI(35) +#define IRQ_PDMA1 IRQ_SPI(36) +#define IRQ_TIMER0_VIC IRQ_SPI(37) +#define IRQ_TIMER1_VIC IRQ_SPI(38) +#define IRQ_TIMER2_VIC IRQ_SPI(39) +#define IRQ_TIMER3_VIC IRQ_SPI(40) +#define IRQ_TIMER4_VIC IRQ_SPI(41) +#define IRQ_MCT_L0 IRQ_SPI(42) +#define IRQ_WDT IRQ_SPI(43) +#define IRQ_RTC_ALARM IRQ_SPI(44) +#define IRQ_RTC_TIC IRQ_SPI(45) +#define IRQ_GPIO_XB IRQ_SPI(46) +#define IRQ_GPIO_XA IRQ_SPI(47) +#define IRQ_MCT_L1 IRQ_SPI(48) + +#define IRQ_UART0 IRQ_SPI(52) +#define IRQ_UART1 IRQ_SPI(53) +#define IRQ_UART2 IRQ_SPI(54) +#define IRQ_UART3 IRQ_SPI(55) +#define IRQ_UART4 IRQ_SPI(56) +#define IRQ_MCT_G0 IRQ_SPI(57) +#define IRQ_IIC IRQ_SPI(58) +#define IRQ_IIC1 IRQ_SPI(59) +#define IRQ_IIC2 IRQ_SPI(60) +#define IRQ_IIC3 IRQ_SPI(61) +#define IRQ_IIC4 IRQ_SPI(62) +#define IRQ_IIC5 IRQ_SPI(63) +#define IRQ_IIC6 IRQ_SPI(64) +#define IRQ_IIC7 IRQ_SPI(65) + +#define IRQ_USB_HOST IRQ_SPI(70) +#define IRQ_USB_HSOTG IRQ_SPI(71) +#define IRQ_MODEM_IF IRQ_SPI(72) +#define IRQ_HSMMC0 IRQ_SPI(73) +#define IRQ_HSMMC1 IRQ_SPI(74) +#define IRQ_HSMMC2 IRQ_SPI(75) +#define IRQ_HSMMC3 IRQ_SPI(76) +#define IRQ_DWMCI IRQ_SPI(77) + +#define IRQ_MIPICSI0 IRQ_SPI(78) + +#define IRQ_MIPICSI1 IRQ_SPI(80) + +#define IRQ_ONENAND_AUDI IRQ_SPI(82) +#define IRQ_ROTATOR IRQ_SPI(83) +#define IRQ_FIMC0 IRQ_SPI(84) +#define IRQ_FIMC1 IRQ_SPI(85) +#define IRQ_FIMC2 IRQ_SPI(86) +#define IRQ_FIMC3 IRQ_SPI(87) +#define IRQ_JPEG IRQ_SPI(88) +#define IRQ_2D IRQ_SPI(89) +#define IRQ_PCIE IRQ_SPI(90) + +#define IRQ_MFC IRQ_SPI(94) + +#define IRQ_AUDIO_SS IRQ_SPI(96) +#define IRQ_I2S0 IRQ_SPI(97) +#define IRQ_I2S1 IRQ_SPI(98) +#define IRQ_I2S2 IRQ_SPI(99) +#define IRQ_AC97 IRQ_SPI(100) + +#define IRQ_SPDIF IRQ_SPI(104) +#define IRQ_ADC0 IRQ_SPI(105) +#define IRQ_PEN0 IRQ_SPI(106) +#define IRQ_ADC1 IRQ_SPI(107) +#define IRQ_PEN1 IRQ_SPI(108) +#define IRQ_KEYPAD IRQ_SPI(109) +#define IRQ_PMU IRQ_SPI(110) +#define IRQ_GPS IRQ_SPI(111) +#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(112) +#define IRQ_SLIMBUS IRQ_SPI(113) + +#define IRQ_TSI IRQ_SPI(115) +#define IRQ_SATA IRQ_SPI(116) #define MAX_IRQ_IN_COMBINER 8 -#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(64)) +#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128)) #define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y) #define IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0) @@ -73,75 +138,14 @@ #define IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6) #define IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7) -#define IRQ_PDMA0 COMBINER_IRQ(21, 0) -#define IRQ_PDMA1 COMBINER_IRQ(21, 1) - -#define IRQ_TIMER0_VIC COMBINER_IRQ(22, 0) -#define IRQ_TIMER1_VIC COMBINER_IRQ(22, 1) -#define IRQ_TIMER2_VIC COMBINER_IRQ(22, 2) -#define IRQ_TIMER3_VIC COMBINER_IRQ(22, 3) -#define IRQ_TIMER4_VIC COMBINER_IRQ(22, 4) - -#define IRQ_RTC_ALARM COMBINER_IRQ(23, 0) -#define IRQ_RTC_TIC COMBINER_IRQ(23, 1) - -#define IRQ_GPIO_XB COMBINER_IRQ(24, 0) -#define IRQ_GPIO_XA COMBINER_IRQ(24, 1) - -#define IRQ_UART0 COMBINER_IRQ(26, 0) -#define IRQ_UART1 COMBINER_IRQ(26, 1) -#define IRQ_UART2 COMBINER_IRQ(26, 2) -#define IRQ_UART3 COMBINER_IRQ(26, 3) -#define IRQ_UART4 COMBINER_IRQ(26, 4) - -#define IRQ_IIC COMBINER_IRQ(27, 0) -#define IRQ_IIC1 COMBINER_IRQ(27, 1) -#define IRQ_IIC2 COMBINER_IRQ(27, 2) -#define IRQ_IIC3 COMBINER_IRQ(27, 3) -#define IRQ_IIC4 COMBINER_IRQ(27, 4) -#define IRQ_IIC5 COMBINER_IRQ(27, 5) -#define IRQ_IIC6 COMBINER_IRQ(27, 6) -#define IRQ_IIC7 COMBINER_IRQ(27, 7) - -#define IRQ_HSMMC0 COMBINER_IRQ(29, 0) -#define IRQ_HSMMC1 COMBINER_IRQ(29, 1) -#define IRQ_HSMMC2 COMBINER_IRQ(29, 2) -#define IRQ_HSMMC3 COMBINER_IRQ(29, 3) - -#define IRQ_MIPI_CSIS0 COMBINER_IRQ(30, 0) -#define IRQ_MIPI_CSIS1 COMBINER_IRQ(30, 1) - -#define IRQ_FIMC0 COMBINER_IRQ(32, 0) -#define IRQ_FIMC1 COMBINER_IRQ(32, 1) -#define IRQ_FIMC2 COMBINER_IRQ(33, 0) -#define IRQ_FIMC3 COMBINER_IRQ(33, 1) - -#define IRQ_ONENAND_AUDI COMBINER_IRQ(34, 0) - -#define IRQ_MCT_L1 COMBINER_IRQ(35, 3) - -#define IRQ_EINT4 COMBINER_IRQ(37, 0) -#define IRQ_EINT5 COMBINER_IRQ(37, 1) -#define IRQ_EINT6 COMBINER_IRQ(37, 2) -#define IRQ_EINT7 COMBINER_IRQ(37, 3) -#define IRQ_EINT8 COMBINER_IRQ(38, 0) - -#define IRQ_EINT9 COMBINER_IRQ(38, 1) -#define IRQ_EINT10 COMBINER_IRQ(38, 2) -#define IRQ_EINT11 COMBINER_IRQ(38, 3) -#define IRQ_EINT12 COMBINER_IRQ(38, 4) -#define IRQ_EINT13 COMBINER_IRQ(38, 5) -#define IRQ_EINT14 COMBINER_IRQ(38, 6) -#define IRQ_EINT15 COMBINER_IRQ(38, 7) - -#define IRQ_EINT16_31 COMBINER_IRQ(39, 0) - -#define IRQ_MCT_L0 COMBINER_IRQ(51, 0) +#define IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0) +#define IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1) +#define IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2) -#define IRQ_WDT COMBINER_IRQ(53, 0) -#define IRQ_MCT_G0 COMBINER_IRQ(53, 4) +#define MAX_COMBINER_NR 16 -#define MAX_COMBINER_NR 54 +#define IRQ_ADC IRQ_ADC0 +#define IRQ_TC IRQ_PEN0 #define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0) @@ -155,6 +159,6 @@ #define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT) /* Set the default NR_IRQS */ -#define NR_IRQS (IRQ_GPIO_END) +#define NR_IRQS (IRQ_GPIO_END + 64) #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h index 0009e77a05fc..d32296dc65e2 100644 --- a/arch/arm/mach-exynos4/include/mach/map.h +++ b/arch/arm/mach-exynos4/include/mach/map.h @@ -57,12 +57,14 @@ #define EXYNOS4_PA_DMC0 0x10400000 -#define EXYNOS4_PA_COMBINER 0x10448000 +#define EXYNOS4_PA_COMBINER 0x10440000 + +#define EXYNOS4_PA_GIC_CPU 0x10480000 +#define EXYNOS4_PA_GIC_DIST 0x10490000 +#define EXYNOS4_GIC_BANK_OFFSET 0x8000 #define EXYNOS4_PA_COREPERI 0x10500000 -#define EXYNOS4_PA_GIC_CPU 0x10500100 #define EXYNOS4_PA_TWD 0x10500600 -#define EXYNOS4_PA_GIC_DIST 0x10501000 #define EXYNOS4_PA_L2CC 0x10502000 #define EXYNOS4_PA_MDMA 0x10810000 @@ -93,7 +95,10 @@ #define EXYNOS4_PA_MIPI_CSIS0 0x11880000 #define EXYNOS4_PA_MIPI_CSIS1 0x11890000 +#define EXYNOS4_PA_FIMD0 0x11C00000 + #define EXYNOS4_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) +#define EXYNOS4_PA_DWMCI 0x12550000 #define EXYNOS4_PA_SATA 0x12560000 #define EXYNOS4_PA_SATAPHY 0x125D0000 @@ -103,11 +108,15 @@ #define EXYNOS4_PA_EHCI 0x12580000 #define EXYNOS4_PA_HSPHY 0x125B0000 +#define EXYNOS4_PA_MFC 0x13400000 #define EXYNOS4_PA_UART 0x13800000 #define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) +#define EXYNOS4_PA_ADC 0x13910000 +#define EXYNOS4_PA_ADC1 0x13911000 + #define EXYNOS4_PA_AC97 0x139A0000 #define EXYNOS4_PA_SPDIF 0x139B0000 @@ -130,6 +139,8 @@ #define S3C_PA_IIC5 EXYNOS4_PA_IIC(5) #define S3C_PA_IIC6 EXYNOS4_PA_IIC(6) #define S3C_PA_IIC7 EXYNOS4_PA_IIC(7) +#define SAMSUNG_PA_ADC EXYNOS4_PA_ADC +#define SAMSUNG_PA_ADC1 EXYNOS4_PA_ADC1 #define S3C_PA_RTC EXYNOS4_PA_RTC #define S3C_PA_WDT EXYNOS4_PA_WATCHDOG @@ -140,10 +151,12 @@ #define S5P_PA_FIMC3 EXYNOS4_PA_FIMC3 #define S5P_PA_MIPI_CSIS0 EXYNOS4_PA_MIPI_CSIS0 #define S5P_PA_MIPI_CSIS1 EXYNOS4_PA_MIPI_CSIS1 +#define S5P_PA_FIMD0 EXYNOS4_PA_FIMD0 #define S5P_PA_ONENAND EXYNOS4_PA_ONENAND #define S5P_PA_ONENAND_DMA EXYNOS4_PA_ONENAND_DMA #define S5P_PA_SDRAM EXYNOS4_PA_SDRAM #define S5P_PA_SROMC EXYNOS4_PA_SROMC +#define S5P_PA_MFC EXYNOS4_PA_MFC #define S5P_PA_SYSCON EXYNOS4_PA_SYSCON #define S5P_PA_TIMER EXYNOS4_PA_TIMER #define S5P_PA_EHCI EXYNOS4_PA_EHCI diff --git a/arch/arm/mach-exynos4/include/mach/pm-core.h b/arch/arm/mach-exynos4/include/mach/pm-core.h index f26e46bc06ca..1df3b81f96e8 100644 --- a/arch/arm/mach-exynos4/include/mach/pm-core.h +++ b/arch/arm/mach-exynos4/include/mach/pm-core.h @@ -47,3 +47,13 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, { /* nothing here yet */ } + +static inline void s3c_pm_restored_gpios(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_saved_gpios(void) +{ + /* nothing here yet */ +} diff --git a/arch/arm/mach-exynos4/include/mach/pmu.h b/arch/arm/mach-exynos4/include/mach/pmu.h new file mode 100644 index 000000000000..a952904b010e --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/pmu.h @@ -0,0 +1,25 @@ +/* linux/arch/arm/mach-exynos4/include/mach/pmu.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * EXYNOS4210 - PMU(Power Management Unit) support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_PMU_H +#define __ASM_ARCH_PMU_H __FILE__ + +enum sys_powerdown { + SYS_AFTR, + SYS_LPA, + SYS_SLEEP, + NUM_SYS_POWERDOWN, +}; + +extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode); + +#endif /* __ASM_ARCH_PMU_H */ diff --git a/arch/arm/mach-exynos4/include/mach/regs-audss.h b/arch/arm/mach-exynos4/include/mach/regs-audss.h new file mode 100644 index 000000000000..ca5a8b64218a --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/regs-audss.h @@ -0,0 +1,18 @@ +/* arch/arm/mach-exynos4/include/mach/regs-audss.h + * + * Copyright (c) 2011 Samsung Electronics + * http://www.samsung.com + * + * Exynos4 Audio SubSystem clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_REGS_AUDSS_H +#define __PLAT_REGS_AUDSS_H __FILE__ + +#define EXYNOS4_AUDSS_INT_MEM (0x03000000) + +#endif /* _PLAT_REGS_AUDSS_H */ diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h index 6e311c1157f5..d493fdb422ff 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h @@ -25,6 +25,9 @@ #define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600) #define S5P_CLKGATE_IP_RIGHTBUS S5P_CLKREG(0x08800) +#define S5P_EPLL_LOCK S5P_CLKREG(0x0C010) +#define S5P_VPLL_LOCK S5P_CLKREG(0x0C020) + #define S5P_EPLL_CON0 S5P_CLKREG(0x0C110) #define S5P_EPLL_CON1 S5P_CLKREG(0x0C114) #define S5P_VPLL_CON0 S5P_CLKREG(0x0C120) @@ -33,7 +36,9 @@ #define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210) #define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214) #define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220) +#define S5P_CLKSRC_TV S5P_CLKREG(0x0C224) #define S5P_CLKSRC_MFC S5P_CLKREG(0x0C228) +#define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C) #define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230) #define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234) #define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) @@ -61,6 +66,7 @@ #define S5P_CLKDIV_PERIL3 S5P_CLKREG(0x0C55C) #define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x0C560) #define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564) +#define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580) #define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) #define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) @@ -120,6 +126,12 @@ #define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1) #define S5P_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1) +#define S5P_EPLLCON0_ENABLE_SHIFT (31) +#define S5P_EPLLCON0_LOCKED_SHIFT (29) + +#define S5P_VPLLCON0_ENABLE_SHIFT (31) +#define S5P_VPLLCON0_LOCKED_SHIFT (29) + #define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16) #define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT) diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos4/include/mach/regs-pmu.h index a9643371f8e7..fa49bbb8e7b0 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h @@ -158,6 +158,7 @@ #define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0) #define S5P_PMU_SATA_PHY_CONTROL_EN 0x1 +#define S5P_CORE_LOCAL_PWR_EN 0x3 #define S5P_INT_LOCAL_PWR_EN 0x7 #define S5P_CHECK_SLEEP 0x00000BAD diff --git a/arch/arm/mach-exynos4/localtimer.c b/arch/arm/mach-exynos4/localtimer.c deleted file mode 100644 index 6bf3d0ab9627..000000000000 --- a/arch/arm/mach-exynos4/localtimer.c +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/arch/arm/mach-exynos4/localtimer.c - * - * Cloned from linux/arch/arm/mach-realview/localtimer.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/clockchips.h> - -#include <asm/irq.h> -#include <asm/localtimer.h> - -/* - * Setup the local clock events for a CPU. - */ -int __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - evt->irq = IRQ_LOCALTIMER; - twd_timer_setup(evt); - return 0; -} diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c index 642702bb5b12..43be71b799cb 100644 --- a/arch/arm/mach-exynos4/mach-nuri.c +++ b/arch/arm/mach-exynos4/mach-nuri.c @@ -13,10 +13,15 @@ #include <linux/input.h> #include <linux/i2c.h> #include <linux/i2c/atmel_mxt_ts.h> +#include <linux/i2c-gpio.h> #include <linux/gpio_keys.h> #include <linux/gpio.h> +#include <linux/power/max8903_charger.h> +#include <linux/power/max17042_battery.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> +#include <linux/mfd/max8997.h> +#include <linux/mfd/max8997-private.h> #include <linux/mmc/host.h> #include <linux/fb.h> #include <linux/pwm_backlight.h> @@ -26,6 +31,7 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <plat/adc.h> #include <plat/regs-serial.h> #include <plat/exynos4.h> #include <plat/cpu.h> @@ -35,6 +41,8 @@ #include <plat/clock.h> #include <plat/gpio-cfg.h> #include <plat/iic.h> +#include <plat/mfc.h> +#include <plat/pd.h> #include <mach/map.h> @@ -54,6 +62,7 @@ enum fixed_regulator_id { FIXED_REG_ID_MMC = 0, + FIXED_REG_ID_MAX8903, }; static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = { @@ -344,10 +353,730 @@ static void __init nuri_tsp_init(void) s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); } +static struct regulator_consumer_supply __initdata max8997_ldo1_[] = { + REGULATOR_SUPPLY("vdd", "s5p-adc"), /* Used by CPU's ADC drv */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo3_[] = { + REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo4_[] = { + REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo5_[] = { + REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo7_[] = { + REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo8_[] = { + REGULATOR_SUPPLY("vusb_d", NULL), /* Used by CPU */ + REGULATOR_SUPPLY("vdac", NULL), /* Used by CPU */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo11_[] = { + REGULATOR_SUPPLY("vcc", "platform-lcd"), /* U804 LVDS */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo12_[] = { + REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo13_[] = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), /* TFLASH */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo14_[] = { + REGULATOR_SUPPLY("inmotor", "max8997-haptic"), +}; +static struct regulator_consumer_supply __initdata max8997_ldo15_[] = { + REGULATOR_SUPPLY("avdd", "3-004a"), /* Touch Screen */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo16_[] = { + REGULATOR_SUPPLY("d_sensor", "0-001f"), /* HDC803 */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo18_[] = { + REGULATOR_SUPPLY("vdd", "3-004a"), /* Touch Screen */ +}; +static struct regulator_consumer_supply __initdata max8997_buck1_[] = { + REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */ +}; +static struct regulator_consumer_supply __initdata max8997_buck2_[] = { + REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */ +}; +static struct regulator_consumer_supply __initdata max8997_buck3_[] = { + REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */ +}; +static struct regulator_consumer_supply __initdata max8997_buck4_[] = { + REGULATOR_SUPPLY("core", "0-001f"), /* HDC803 */ +}; +static struct regulator_consumer_supply __initdata max8997_buck6_[] = { + REGULATOR_SUPPLY("dig_28", "0-001f"), /* pin "7" of HDC803 */ +}; +static struct regulator_consumer_supply __initdata max8997_esafeout1_[] = { + REGULATOR_SUPPLY("usb_vbus", NULL), /* CPU's USB OTG */ +}; +static struct regulator_consumer_supply __initdata max8997_esafeout2_[] = { + REGULATOR_SUPPLY("usb_vbus", "modemctl"), /* VBUS of Modem */ +}; + +static struct regulator_consumer_supply __initdata max8997_charger_[] = { + REGULATOR_SUPPLY("vinchg1", "charger-manager.0"), +}; +static struct regulator_consumer_supply __initdata max8997_chg_toff_[] = { + REGULATOR_SUPPLY("vinchg_stop", NULL), /* for jack interrupt handlers */ +}; + +static struct regulator_consumer_supply __initdata max8997_32khz_ap_[] = { + REGULATOR_SUPPLY("gps_clk", "bcm4751"), + REGULATOR_SUPPLY("bt_clk", "bcm4330-b1"), + REGULATOR_SUPPLY("wifi_clk", "bcm433-b1"), +}; + +static struct regulator_init_data __initdata max8997_ldo1_data = { + .constraints = { + .name = "VADC_3.3V_C210", + .min_uV = 3300000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo1_), + .consumer_supplies = max8997_ldo1_, +}; + +static struct regulator_init_data __initdata max8997_ldo2_data = { + .constraints = { + .name = "VALIVE_1.1V_C210", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo3_data = { + .constraints = { + .name = "VUSB_1.1V_C210", + .min_uV = 1100000, + .max_uV = 1100000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo3_), + .consumer_supplies = max8997_ldo3_, +}; + +static struct regulator_init_data __initdata max8997_ldo4_data = { + .constraints = { + .name = "VMIPI_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo4_), + .consumer_supplies = max8997_ldo4_, +}; + +static struct regulator_init_data __initdata max8997_ldo5_data = { + .constraints = { + .name = "VHSIC_1.2V_C210", + .min_uV = 1200000, + .max_uV = 1200000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo5_), + .consumer_supplies = max8997_ldo5_, +}; + +static struct regulator_init_data __initdata max8997_ldo6_data = { + .constraints = { + .name = "VCC_1.8V_PDA", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo7_data = { + .constraints = { + .name = "CAM_ISP_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo7_), + .consumer_supplies = max8997_ldo7_, +}; + +static struct regulator_init_data __initdata max8997_ldo8_data = { + .constraints = { + .name = "VUSB/VDAC_3.3V_C210", + .min_uV = 3300000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo8_), + .consumer_supplies = max8997_ldo8_, +}; + +static struct regulator_init_data __initdata max8997_ldo9_data = { + .constraints = { + .name = "VCC_2.8V_PDA", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo10_data = { + .constraints = { + .name = "VPLL_1.1V_C210", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo11_data = { + .constraints = { + .name = "LVDS_VDD3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .boot_on = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo11_), + .consumer_supplies = max8997_ldo11_, +}; + +static struct regulator_init_data __initdata max8997_ldo12_data = { + .constraints = { + .name = "VT_CAM_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo12_), + .consumer_supplies = max8997_ldo12_, +}; + +static struct regulator_init_data __initdata max8997_ldo13_data = { + .constraints = { + .name = "VTF_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo13_), + .consumer_supplies = max8997_ldo13_, +}; + +static struct regulator_init_data __initdata max8997_ldo14_data = { + .constraints = { + .name = "VCC_3.0V_MOTOR", + .min_uV = 3000000, + .max_uV = 3000000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo14_), + .consumer_supplies = max8997_ldo14_, +}; + +static struct regulator_init_data __initdata max8997_ldo15_data = { + .constraints = { + .name = "VTOUCH_ADVV2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo15_), + .consumer_supplies = max8997_ldo15_, +}; + +static struct regulator_init_data __initdata max8997_ldo16_data = { + .constraints = { + .name = "CAM_SENSOR_IO_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo16_), + .consumer_supplies = max8997_ldo16_, +}; + +static struct regulator_init_data __initdata max8997_ldo18_data = { + .constraints = { + .name = "VTOUCH_VDD2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo18_), + .consumer_supplies = max8997_ldo18_, +}; + +static struct regulator_init_data __initdata max8997_ldo21_data = { + .constraints = { + .name = "VDDQ_M1M2_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_buck1_data = { + .constraints = { + .name = "VARM_1.2V_C210", + .min_uV = 900000, + .max_uV = 1350000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_buck1_), + .consumer_supplies = max8997_buck1_, +}; + +static struct regulator_init_data __initdata max8997_buck2_data = { + .constraints = { + .name = "VINT_1.1V_C210", + .min_uV = 900000, + .max_uV = 1100000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_buck2_), + .consumer_supplies = max8997_buck2_, +}; + +static struct regulator_init_data __initdata max8997_buck3_data = { + .constraints = { + .name = "VG3D_1.1V_C210", + .min_uV = 900000, + .max_uV = 1100000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_buck3_), + .consumer_supplies = max8997_buck3_, +}; + +static struct regulator_init_data __initdata max8997_buck4_data = { + .constraints = { + .name = "CAM_ISP_CORE_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_buck4_), + .consumer_supplies = max8997_buck4_, +}; + +static struct regulator_init_data __initdata max8997_buck5_data = { + .constraints = { + .name = "VMEM_1.2V_C210", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_buck6_data = { + .constraints = { + .name = "CAM_AF_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_buck6_), + .consumer_supplies = max8997_buck6_, +}; + +static struct regulator_init_data __initdata max8997_buck7_data = { + .constraints = { + .name = "VCC_SUB_2.0V", + .min_uV = 2000000, + .max_uV = 2000000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_32khz_ap_data = { + .constraints = { + .name = "32KHz AP", + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_32khz_ap_), + .consumer_supplies = max8997_32khz_ap_, +}; + +static struct regulator_init_data __initdata max8997_32khz_cp_data = { + .constraints = { + .name = "32KHz CP", + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_vichg_data = { + .constraints = { + .name = "VICHG", + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_esafeout1_data = { + .constraints = { + .name = "SAFEOUT1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout1_), + .consumer_supplies = max8997_esafeout1_, +}; + +static struct regulator_init_data __initdata max8997_esafeout2_data = { + .constraints = { + .name = "SAFEOUT2", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout2_), + .consumer_supplies = max8997_esafeout2_, +}; + +static struct regulator_init_data __initdata max8997_charger_cv_data = { + .constraints = { + .name = "CHARGER_CV", + .min_uV = 4200000, + .max_uV = 4200000, + .apply_uV = 1, + }, +}; + +static struct regulator_init_data __initdata max8997_charger_data = { + .constraints = { + .name = "CHARGER", + .min_uA = 200000, + .max_uA = 950000, + .boot_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_CURRENT, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_charger_), + .consumer_supplies = max8997_charger_, +}; + +static struct regulator_init_data __initdata max8997_charger_topoff_data = { + .constraints = { + .name = "CHARGER TOPOFF", + .min_uA = 50000, + .max_uA = 200000, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_chg_toff_), + .consumer_supplies = max8997_chg_toff_, +}; + +static struct max8997_regulator_data __initdata nuri_max8997_regulators[] = { + { MAX8997_LDO1, &max8997_ldo1_data }, + { MAX8997_LDO2, &max8997_ldo2_data }, + { MAX8997_LDO3, &max8997_ldo3_data }, + { MAX8997_LDO4, &max8997_ldo4_data }, + { MAX8997_LDO5, &max8997_ldo5_data }, + { MAX8997_LDO6, &max8997_ldo6_data }, + { MAX8997_LDO7, &max8997_ldo7_data }, + { MAX8997_LDO8, &max8997_ldo8_data }, + { MAX8997_LDO9, &max8997_ldo9_data }, + { MAX8997_LDO10, &max8997_ldo10_data }, + { MAX8997_LDO11, &max8997_ldo11_data }, + { MAX8997_LDO12, &max8997_ldo12_data }, + { MAX8997_LDO13, &max8997_ldo13_data }, + { MAX8997_LDO14, &max8997_ldo14_data }, + { MAX8997_LDO15, &max8997_ldo15_data }, + { MAX8997_LDO16, &max8997_ldo16_data }, + + { MAX8997_LDO18, &max8997_ldo18_data }, + { MAX8997_LDO21, &max8997_ldo21_data }, + + { MAX8997_BUCK1, &max8997_buck1_data }, + { MAX8997_BUCK2, &max8997_buck2_data }, + { MAX8997_BUCK3, &max8997_buck3_data }, + { MAX8997_BUCK4, &max8997_buck4_data }, + { MAX8997_BUCK5, &max8997_buck5_data }, + { MAX8997_BUCK6, &max8997_buck6_data }, + { MAX8997_BUCK7, &max8997_buck7_data }, + + { MAX8997_EN32KHZ_AP, &max8997_32khz_ap_data }, + { MAX8997_EN32KHZ_CP, &max8997_32khz_cp_data }, + + { MAX8997_ENVICHG, &max8997_vichg_data }, + { MAX8997_ESAFEOUT1, &max8997_esafeout1_data }, + { MAX8997_ESAFEOUT2, &max8997_esafeout2_data }, + { MAX8997_CHARGER_CV, &max8997_charger_cv_data }, + { MAX8997_CHARGER, &max8997_charger_data }, + { MAX8997_CHARGER_TOPOFF, &max8997_charger_topoff_data }, +}; + +static struct max8997_platform_data __initdata nuri_max8997_pdata = { + .wakeup = 1, + + .num_regulators = ARRAY_SIZE(nuri_max8997_regulators), + .regulators = nuri_max8997_regulators, + + .buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) }, + .buck2_gpiodvs = true, + + .buck1_voltage[0] = 1350000, /* 1.35V */ + .buck1_voltage[1] = 1300000, /* 1.3V */ + .buck1_voltage[2] = 1250000, /* 1.25V */ + .buck1_voltage[3] = 1200000, /* 1.2V */ + .buck1_voltage[4] = 1150000, /* 1.15V */ + .buck1_voltage[5] = 1100000, /* 1.1V */ + .buck1_voltage[6] = 1000000, /* 1.0V */ + .buck1_voltage[7] = 950000, /* 0.95V */ + + .buck2_voltage[0] = 1100000, /* 1.1V */ + .buck2_voltage[1] = 1000000, /* 1.0V */ + .buck2_voltage[2] = 950000, /* 0.95V */ + .buck2_voltage[3] = 900000, /* 0.9V */ + .buck2_voltage[4] = 1100000, /* 1.1V */ + .buck2_voltage[5] = 1000000, /* 1.0V */ + .buck2_voltage[6] = 950000, /* 0.95V */ + .buck2_voltage[7] = 900000, /* 0.9V */ + + .buck5_voltage[0] = 1200000, /* 1.2V */ + .buck5_voltage[1] = 1200000, /* 1.2V */ + .buck5_voltage[2] = 1200000, /* 1.2V */ + .buck5_voltage[3] = 1200000, /* 1.2V */ + .buck5_voltage[4] = 1200000, /* 1.2V */ + .buck5_voltage[5] = 1200000, /* 1.2V */ + .buck5_voltage[6] = 1200000, /* 1.2V */ + .buck5_voltage[7] = 1200000, /* 1.2V */ +}; + /* GPIO I2C 5 (PMIC) */ +enum { I2C5_MAX8997 }; static struct i2c_board_info i2c5_devs[] __initdata = { - /* max8997, To be updated */ + [I2C5_MAX8997] = { + I2C_BOARD_INFO("max8997", 0xCC >> 1), + .platform_data = &nuri_max8997_pdata, + }, +}; + +static struct max17042_platform_data nuri_battery_platform_data = { +}; + +/* GPIO I2C 9 (Fuel Gauge) */ +static struct i2c_gpio_platform_data i2c9_gpio_data = { + .sda_pin = EXYNOS4_GPY4(0), /* XM0ADDR_8 */ + .scl_pin = EXYNOS4_GPY4(1), /* XM0ADDR_9 */ +}; +static struct platform_device i2c9_gpio = { + .name = "i2c-gpio", + .id = 9, + .dev = { + .platform_data = &i2c9_gpio_data, + }, }; +enum { I2C9_MAX17042}; +static struct i2c_board_info i2c9_devs[] __initdata = { + [I2C9_MAX17042] = { + I2C_BOARD_INFO("max17042", 0x36), + .platform_data = &nuri_battery_platform_data, + }, +}; + +/* MAX8903 Secondary Charger */ +static struct regulator_consumer_supply supplies_max8903[] = { + REGULATOR_SUPPLY("vinchg2", "charger-manager.0"), +}; + +static struct regulator_init_data max8903_charger_en_data = { + .constraints = { + .name = "VOUT_CHARGER", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(supplies_max8903), + .consumer_supplies = supplies_max8903, +}; + +static struct fixed_voltage_config max8903_charger_en = { + .supply_name = "VOUT_CHARGER", + .microvolts = 5000000, /* Assume 5VDC */ + .gpio = EXYNOS4_GPY4(5), /* TA_EN negaged */ + .enable_high = 0, /* Enable = Low */ + .enabled_at_boot = 1, + .init_data = &max8903_charger_en_data, +}; + +static struct platform_device max8903_fixed_reg_dev = { + .name = "reg-fixed-voltage", + .id = FIXED_REG_ID_MAX8903, + .dev = { .platform_data = &max8903_charger_en }, +}; + +static struct max8903_pdata nuri_max8903 = { + /* + * cen: don't control with the driver, let it be + * controlled by regulator above + */ + .dok = EXYNOS4_GPX1(4), /* TA_nCONNECTED */ + /* uok, usus: not connected */ + .chg = EXYNOS4_GPE2(0), /* TA_nCHG */ + /* flt: vcc_1.8V_pda */ + .dcm = EXYNOS4_GPL0(1), /* CURR_ADJ */ + + .dc_valid = true, + .usb_valid = false, /* USB is not wired to MAX8903 */ +}; + +static struct platform_device nuri_max8903_device = { + .name = "max8903-charger", + .dev = { + .platform_data = &nuri_max8903, + }, +}; + +static struct device *nuri_cm_devices[] = { + &s3c_device_i2c5.dev, + &s3c_device_adc.dev, + NULL, /* Reserved for UART */ + NULL, +}; + +static void __init nuri_power_init(void) +{ + int gpio; + int irq_base = IRQ_GPIO_END + 1; + int ta_en = 0; + + nuri_max8997_pdata.irq_base = irq_base; + irq_base += MAX8997_IRQ_NR; + + gpio = EXYNOS4_GPX0(7); + gpio_request(gpio, "AP_PMIC_IRQ"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + + gpio = EXYNOS4_GPX2(3); + gpio_request(gpio, "FUEL_ALERT"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + + gpio = nuri_max8903.dok; + gpio_request(gpio, "TA_nCONNECTED"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + ta_en = gpio_get_value(gpio) ? 0 : 1; + + gpio = nuri_max8903.chg; + gpio_request(gpio, "TA_nCHG"); + gpio_direction_input(gpio); + + gpio = nuri_max8903.dcm; + gpio_request(gpio, "CURR_ADJ"); + gpio_direction_output(gpio, ta_en); +} /* USB EHCI */ static struct s5p_ehci_platdata nuri_ehci_pdata; @@ -361,6 +1090,7 @@ static void __init nuri_ehci_init(void) static struct platform_device *nuri_devices[] __initdata = { /* Samsung Platform Devices */ + &s3c_device_i2c5, /* PMIC should initialize first */ &emmc_fixed_voltage, &s3c_device_hsmmc0, &s3c_device_hsmmc2, @@ -369,11 +1099,20 @@ static struct platform_device *nuri_devices[] __initdata = { &s3c_device_timer[0], &s5p_device_ehci, &s3c_device_i2c3, + &i2c9_gpio, + &s3c_device_adc, + &s3c_device_rtc, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, + &exynos4_device_pd[PD_MFC], /* NURI Devices */ &nuri_gpio_keys, &nuri_lcd_device, &nuri_backlight_device, + &max8903_fixed_reg_dev, + &nuri_max8903_device, }; static void __init nuri_map_io(void) @@ -383,21 +1122,32 @@ static void __init nuri_map_io(void) s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs)); } +static void __init nuri_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); +} + static void __init nuri_machine_init(void) { nuri_sdhci_init(); nuri_tsp_init(); + nuri_power_init(); i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); s3c_i2c3_set_platdata(&i2c3_data); i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs)); + s3c_i2c5_set_platdata(NULL); + i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7)); i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); + i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3)); + i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs)); nuri_ehci_init(); clk_xusbxti.rate = 24000000; /* Last */ platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices)); + s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; } MACHINE_START(NURI, "NURI") @@ -407,4 +1157,5 @@ MACHINE_START(NURI, "NURI") .map_io = nuri_map_io, .init_machine = nuri_machine_init, .timer = &exynos4_timer, + .reserve = &nuri_reserve, MACHINE_END diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c index f606ea75bf43..a7c65e05c1eb 100644 --- a/arch/arm/mach-exynos4/mach-smdkc210.c +++ b/arch/arm/mach-exynos4/mach-smdkc210.c @@ -9,7 +9,9 @@ */ #include <linux/serial_core.h> +#include <linux/delay.h> #include <linux/gpio.h> +#include <linux/lcd.h> #include <linux/mmc/host.h> #include <linux/platform_device.h> #include <linux/smsc911x.h> @@ -20,11 +22,15 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <video/platform_lcd.h> + #include <plat/regs-serial.h> #include <plat/regs-srom.h> +#include <plat/regs-fb-v4.h> #include <plat/exynos4.h> #include <plat/cpu.h> #include <plat/devs.h> +#include <plat/fb.h> #include <plat/sdhci.h> #include <plat/iic.h> #include <plat/pd.h> @@ -114,6 +120,67 @@ static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = { .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; +static void lcd_lte480wv_set_power(struct plat_lcd_data *pd, + unsigned int power) +{ + if (power) { +#if !defined(CONFIG_BACKLIGHT_PWM) + gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0"); + gpio_free(EXYNOS4_GPD0(1)); +#endif + /* fire nRESET on power up */ + gpio_request(EXYNOS4_GPX0(6), "GPX0"); + + gpio_direction_output(EXYNOS4_GPX0(6), 1); + mdelay(100); + + gpio_set_value(EXYNOS4_GPX0(6), 0); + mdelay(10); + + gpio_set_value(EXYNOS4_GPX0(6), 1); + mdelay(10); + + gpio_free(EXYNOS4_GPX0(6)); + } else { +#if !defined(CONFIG_BACKLIGHT_PWM) + gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0"); + gpio_free(EXYNOS4_GPD0(1)); +#endif + } +} + +static struct plat_lcd_data smdkc210_lcd_lte480wv_data = { + .set_power = lcd_lte480wv_set_power, +}; + +static struct platform_device smdkc210_lcd_lte480wv = { + .name = "platform-lcd", + .dev.parent = &s5p_device_fimd0.dev, + .dev.platform_data = &smdkc210_lcd_lte480wv_data, +}; + +static struct s3c_fb_pd_win smdkc210_fb_win0 = { + .win_mode = { + .left_margin = 13, + .right_margin = 8, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 24, +}; + +static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = { + .win[0] = &smdkc210_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, +}; + static struct resource smdkc210_smsc911x_resources[] = { [0] = { .start = EXYNOS4_PA_SROM_BANK(1), @@ -168,6 +235,8 @@ static struct platform_device *smdkc210_devices[] __initdata = { &exynos4_device_pd[PD_GPS], &exynos4_device_sysmmu, &samsung_asoc_dma, + &s5p_device_fimd0, + &smdkc210_lcd_lte480wv, &smdkc210_smsc911x, }; @@ -225,6 +294,7 @@ static void __init smdkc210_machine_init(void) s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata); samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data); + s5p_fimd0_set_platdata(&smdkc210_lcd0_pdata); platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices)); } diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index df1107828abd..ea4149556860 100644 --- a/arch/arm/mach-exynos4/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -184,9 +184,12 @@ static struct platform_device *smdkv310_devices[] __initdata = { &exynos4_device_pd[PD_CAM], &exynos4_device_pd[PD_TV], &exynos4_device_pd[PD_GPS], + &exynos4_device_spdif, &exynos4_device_sysmmu, &samsung_asoc_dma, + &samsung_asoc_idma, &smdkv310_smsc911x, + &exynos4_device_ahci, }; static void __init smdkv310_smsc911x_init(void) diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c index 97d329fff2cf..0e280d12301e 100644 --- a/arch/arm/mach-exynos4/mach-universal_c210.c +++ b/arch/arm/mach-exynos4/mach-universal_c210.c @@ -18,6 +18,9 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/max8952.h> #include <linux/mmc/host.h> +#include <linux/i2c-gpio.h> +#include <linux/i2c/mcs.h> +#include <linux/i2c/atmel_mxt_ts.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -27,7 +30,10 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/iic.h> +#include <plat/gpio-cfg.h> +#include <plat/mfc.h> #include <plat/sdhci.h> +#include <plat/pd.h> #include <mach/map.h> @@ -477,6 +483,96 @@ static struct i2c_board_info i2c5_devs[] __initdata = { }, }; +/* I2C3 (TSP) */ +static struct mxt_platform_data qt602240_platform_data = { + .x_line = 19, + .y_line = 11, + .x_size = 800, + .y_size = 480, + .blen = 0x11, + .threshold = 0x28, + .voltage = 2800000, /* 2.8V */ + .orient = MXT_DIAGONAL, +}; + +static struct i2c_board_info i2c3_devs[] __initdata = { + { + I2C_BOARD_INFO("qt602240_ts", 0x4a), + .platform_data = &qt602240_platform_data, + }, +}; + +static void __init universal_tsp_init(void) +{ + int gpio; + + /* TSP_LDO_ON: XMDMADDR_11 */ + gpio = EXYNOS4_GPE2(3); + gpio_request(gpio, "TSP_LDO_ON"); + gpio_direction_output(gpio, 1); + gpio_export(gpio, 0); + + /* TSP_INT: XMDMADDR_7 */ + gpio = EXYNOS4_GPE1(7); + gpio_request(gpio, "TSP_INT"); + + s5p_register_gpio_interrupt(gpio); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + i2c3_devs[0].irq = gpio_to_irq(gpio); +} + + +/* GPIO I2C 12 (3 Touchkey) */ +static uint32_t touchkey_keymap[] = { + /* MCS_KEY_MAP(value, keycode) */ + MCS_KEY_MAP(0, KEY_MENU), /* KEY_SEND */ + MCS_KEY_MAP(1, KEY_BACK), /* KEY_END */ +}; + +static struct mcs_platform_data touchkey_data = { + .keymap = touchkey_keymap, + .keymap_size = ARRAY_SIZE(touchkey_keymap), + .key_maxval = 2, +}; + +/* GPIO I2C 3_TOUCH 2.8V */ +#define I2C_GPIO_BUS_12 12 +static struct i2c_gpio_platform_data i2c_gpio12_data = { + .sda_pin = EXYNOS4_GPE4(0), /* XMDMDATA_8 */ + .scl_pin = EXYNOS4_GPE4(1), /* XMDMDATA_9 */ +}; + +static struct platform_device i2c_gpio12 = { + .name = "i2c-gpio", + .id = I2C_GPIO_BUS_12, + .dev = { + .platform_data = &i2c_gpio12_data, + }, +}; + +static struct i2c_board_info i2c_gpio12_devs[] __initdata = { + { + I2C_BOARD_INFO("mcs5080_touchkey", 0x20), + .platform_data = &touchkey_data, + }, +}; + +static void __init universal_touchkey_init(void) +{ + int gpio; + + gpio = EXYNOS4_GPE3(7); /* XMDMDATA_7 */ + gpio_request(gpio, "3_TOUCH_INT"); + s5p_register_gpio_interrupt(gpio); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + i2c_gpio12_devs[0].irq = gpio_to_irq(gpio); + + gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */ + gpio_request(gpio, "3_TOUCH_EN"); + gpio_direction_output(gpio, 1); +} + /* GPIO KEYS */ static struct gpio_keys_button universal_gpio_keys_tables[] = { { @@ -608,15 +704,25 @@ static struct i2c_board_info i2c1_devs[] __initdata = { static struct platform_device *universal_devices[] __initdata = { /* Samsung Platform Devices */ + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5p_device_fimc3, &mmc0_fixed_voltage, &s3c_device_hsmmc0, &s3c_device_hsmmc2, &s3c_device_hsmmc3, + &s3c_device_i2c3, &s3c_device_i2c5, /* Universal Devices */ + &i2c_gpio12, &universal_gpio_keys, &s5p_device_onenand, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, + &exynos4_device_pd[PD_MFC], }; static void __init universal_map_io(void) @@ -626,6 +732,11 @@ static void __init universal_map_io(void) s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); } +static void __init universal_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); +} + static void __init universal_machine_init(void) { universal_sdhci_init(); @@ -633,11 +744,20 @@ static void __init universal_machine_init(void) i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs)); i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); + universal_tsp_init(); + s3c_i2c3_set_platdata(NULL); + i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs)); + s3c_i2c5_set_platdata(NULL); i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); + universal_touchkey_init(); + i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs, + ARRAY_SIZE(i2c_gpio12_devs)); + /* Last */ platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices)); + s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; } MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") @@ -647,4 +767,5 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") .map_io = universal_map_io, .init_machine = universal_machine_init, .timer = &exynos4_timer, + .reserve = &universal_reserve, MACHINE_END diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c index 14ac10b7ec02..1ae059b7ad7b 100644 --- a/arch/arm/mach-exynos4/mct.c +++ b/arch/arm/mach-exynos4/mct.c @@ -383,8 +383,8 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt) setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq); } else { mct_tick1_event_irq.dev_id = &mct_tick[cpu]; - irq_set_affinity(IRQ_MCT1, cpumask_of(1)); setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq); + irq_set_affinity(IRQ_MCT_L1, cpumask_of(1)); } } diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index b68d5bdf04cf..7c2282c6ba81 100644 --- a/arch/arm/mach-exynos4/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -28,9 +28,12 @@ #include <mach/hardware.h> #include <mach/regs-clock.h> +#include <mach/regs-pmu.h> extern void exynos4_secondary_startup(void); +#define CPU1_BOOT_REG S5P_VA_SYSRAM + /* * control for which core is the next to come out of the secondary * boot "holding pen" @@ -58,6 +61,31 @@ static void __iomem *scu_base_addr(void) static DEFINE_SPINLOCK(boot_lock); +static void __cpuinit exynos4_gic_secondary_init(void) +{ + void __iomem *dist_base = S5P_VA_GIC_DIST + + (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); + void __iomem *cpu_base = S5P_VA_GIC_CPU + + (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); + int i; + + /* + * Deal with the banked PPI and SGI interrupts - disable all + * PPI interrupts, ensure all SGI interrupts are enabled. + */ + __raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR); + __raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET); + + /* + * Set priority on PPI and SGI interrupts + */ + for (i = 0; i < 32; i += 4) + __raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4); + + __raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK); + __raw_writel(1, cpu_base + GIC_CPU_CTRL); +} + void __cpuinit platform_secondary_init(unsigned int cpu) { /* @@ -65,7 +93,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - gic_secondary_init(0); + exynos4_gic_secondary_init(); /* * let the primary processor know we're out of the @@ -100,16 +128,41 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) */ write_pen_release(cpu); + if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) { + __raw_writel(S5P_CORE_LOCAL_PWR_EN, + S5P_ARM_CORE1_CONFIGURATION); + + timeout = 10; + + /* wait max 10 ms until cpu1 is on */ + while ((__raw_readl(S5P_ARM_CORE1_STATUS) + & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) { + if (timeout-- == 0) + break; + + mdelay(1); + } + + if (timeout == 0) { + printk(KERN_ERR "cpu1 power enable failed"); + spin_unlock(&boot_lock); + return -ETIMEDOUT; + } + } /* * Send the secondary CPU a soft interrupt, thereby causing * the boot monitor to read the system wide flags register, * and branch to the address found there. */ - gic_raise_softirq(cpumask_of(cpu), 1); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { smp_rmb(); + + __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), + CPU1_BOOT_REG); + gic_raise_softirq(cpumask_of(cpu), 1); + if (pen_release == -1) break; diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c index 533c28f758ca..bc6ca9482de1 100644 --- a/arch/arm/mach-exynos4/pm.c +++ b/arch/arm/mach-exynos4/pm.c @@ -18,92 +18,23 @@ #include <linux/suspend.h> #include <linux/syscore_ops.h> #include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> #include <plat/cpu.h> #include <plat/pm.h> +#include <plat/pll.h> +#include <plat/regs-srom.h> #include <mach/regs-irq.h> #include <mach/regs-gpio.h> #include <mach/regs-clock.h> #include <mach/regs-pmu.h> #include <mach/pm-core.h> - -static struct sleep_save exynos4_sleep[] = { - { .reg = S5P_ARM_CORE0_LOWPWR , .val = 0x2, }, - { .reg = S5P_DIS_IRQ_CORE0 , .val = 0x0, }, - { .reg = S5P_DIS_IRQ_CENTRAL0 , .val = 0x0, }, - { .reg = S5P_ARM_CORE1_LOWPWR , .val = 0x2, }, - { .reg = S5P_DIS_IRQ_CORE1 , .val = 0x0, }, - { .reg = S5P_DIS_IRQ_CENTRAL1 , .val = 0x0, }, - { .reg = S5P_ARM_COMMON_LOWPWR , .val = 0x2, }, - { .reg = S5P_L2_0_LOWPWR , .val = 0x3, }, - { .reg = S5P_L2_1_LOWPWR , .val = 0x3, }, - { .reg = S5P_CMU_ACLKSTOP_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_SCLKSTOP_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_LOWPWR , .val = 0x0, }, - { .reg = S5P_APLL_SYSCLK_LOWPWR , .val = 0x0, }, - { .reg = S5P_MPLL_SYSCLK_LOWPWR , .val = 0x0, }, - { .reg = S5P_VPLL_SYSCLK_LOWPWR , .val = 0x0, }, - { .reg = S5P_EPLL_SYSCLK_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_GPSALIVE_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_CAM_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_TV_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_MFC_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_G3D_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_LCD0_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_LCD1_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_MAUDIO_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_GPS_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_CAM_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_TV_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_MFC_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_G3D_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_LCD0_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_LCD1_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_MAUDIO_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_GPS_LOWPWR , .val = 0x0, }, - { .reg = S5P_TOP_BUS_LOWPWR , .val = 0x0, }, - { .reg = S5P_TOP_RETENTION_LOWPWR , .val = 0x1, }, - { .reg = S5P_TOP_PWR_LOWPWR , .val = 0x3, }, - { .reg = S5P_LOGIC_RESET_LOWPWR , .val = 0x0, }, - { .reg = S5P_ONENAND_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_MODIMIF_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_G2D_ACP_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_USBOTG_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_HSMMC_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_CSSYS_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_SECSS_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_PCIE_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_SATA_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_DRAM_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_MAUDIO_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_GPIO_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_UART_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_MMCA_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_MMCB_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_EBIA_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_EBIB_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_ISOLATION_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_ALV_SEL_LOWPWR , .val = 0x0, }, - { .reg = S5P_XUSBXTI_LOWPWR , .val = 0x0, }, - { .reg = S5P_XXTI_LOWPWR , .val = 0x0, }, - { .reg = S5P_EXT_REGULATOR_LOWPWR , .val = 0x0, }, - { .reg = S5P_GPIO_MODE_LOWPWR , .val = 0x0, }, - { .reg = S5P_GPIO_MODE_MAUDIO_LOWPWR , .val = 0x0, }, - { .reg = S5P_CAM_LOWPWR , .val = 0x0, }, - { .reg = S5P_TV_LOWPWR , .val = 0x0, }, - { .reg = S5P_MFC_LOWPWR , .val = 0x0, }, - { .reg = S5P_G3D_LOWPWR , .val = 0x0, }, - { .reg = S5P_LCD0_LOWPWR , .val = 0x0, }, - { .reg = S5P_LCD1_LOWPWR , .val = 0x0, }, - { .reg = S5P_MAUDIO_LOWPWR , .val = 0x0, }, - { .reg = S5P_GPS_LOWPWR , .val = 0x0, }, - { .reg = S5P_GPS_ALIVE_LOWPWR , .val = 0x0, }, -}; +#include <mach/pmu.h> static struct sleep_save exynos4_set_clksrc[] = { { .reg = S5P_CLKSRC_MASK_TOP , .val = 0x00000001, }, @@ -118,20 +49,28 @@ static struct sleep_save exynos4_set_clksrc[] = { { .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, }, }; +static struct sleep_save exynos4_epll_save[] = { + SAVE_ITEM(S5P_EPLL_CON0), + SAVE_ITEM(S5P_EPLL_CON1), +}; + +static struct sleep_save exynos4_vpll_save[] = { + SAVE_ITEM(S5P_VPLL_CON0), + SAVE_ITEM(S5P_VPLL_CON1), +}; + static struct sleep_save exynos4_core_save[] = { /* CMU side */ SAVE_ITEM(S5P_CLKDIV_LEFTBUS), SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), SAVE_ITEM(S5P_CLKDIV_RIGHTBUS), SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS), - SAVE_ITEM(S5P_EPLL_CON0), - SAVE_ITEM(S5P_EPLL_CON1), - SAVE_ITEM(S5P_VPLL_CON0), - SAVE_ITEM(S5P_VPLL_CON1), SAVE_ITEM(S5P_CLKSRC_TOP0), SAVE_ITEM(S5P_CLKSRC_TOP1), SAVE_ITEM(S5P_CLKSRC_CAM), + SAVE_ITEM(S5P_CLKSRC_TV), SAVE_ITEM(S5P_CLKSRC_MFC), + SAVE_ITEM(S5P_CLKSRC_G3D), SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKSRC_LCD0), SAVE_ITEM(S5P_CLKSRC_LCD1), @@ -158,6 +97,7 @@ static struct sleep_save exynos4_core_save[] = { SAVE_ITEM(S5P_CLKDIV_PERIL4), SAVE_ITEM(S5P_CLKDIV_PERIL5), SAVE_ITEM(S5P_CLKDIV_TOP), + SAVE_ITEM(S5P_CLKSRC_MASK_TOP), SAVE_ITEM(S5P_CLKSRC_MASK_CAM), SAVE_ITEM(S5P_CLKSRC_MASK_TV), SAVE_ITEM(S5P_CLKSRC_MASK_LCD0), @@ -166,6 +106,7 @@ static struct sleep_save exynos4_core_save[] = { SAVE_ITEM(S5P_CLKSRC_MASK_FSYS), SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0), SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1), + SAVE_ITEM(S5P_CLKDIV2_RATIO), SAVE_ITEM(S5P_CLKGATE_SCLKCAM), SAVE_ITEM(S5P_CLKGATE_IP_CAM), SAVE_ITEM(S5P_CLKGATE_IP_TV), @@ -186,8 +127,10 @@ static struct sleep_save exynos4_core_save[] = { SAVE_ITEM(S5P_CLKGATE_IP_DMC), SAVE_ITEM(S5P_CLKSRC_CPU), SAVE_ITEM(S5P_CLKDIV_CPU), + SAVE_ITEM(S5P_CLKDIV_CPU + 0x4), SAVE_ITEM(S5P_CLKGATE_SCLKCPU), SAVE_ITEM(S5P_CLKGATE_IP_CPU), + /* GIC side */ SAVE_ITEM(S5P_VA_GIC_CPU + 0x000), SAVE_ITEM(S5P_VA_GIC_CPU + 0x004), @@ -270,6 +213,13 @@ static struct sleep_save exynos4_core_save[] = { SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x070), SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x080), SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x090), + + /* SROM side */ + SAVE_ITEM(S5P_SROM_BW), + SAVE_ITEM(S5P_SROM_BC0), + SAVE_ITEM(S5P_SROM_BC1), + SAVE_ITEM(S5P_SROM_BC2), + SAVE_ITEM(S5P_SROM_BC3), }; static struct sleep_save exynos4_l2cc_save[] = { @@ -280,37 +230,11 @@ static struct sleep_save exynos4_l2cc_save[] = { SAVE_ITEM(S5P_VA_L2CC + L2X0_AUX_CTRL), }; +/* For Cortex-A9 Diagnostic and Power control register */ +static unsigned int save_arm_register[2]; + static int exynos4_cpu_suspend(unsigned long arg) { - unsigned long tmp; - unsigned long mask = 0xFFFFFFFF; - - /* Setting Central Sequence Register for power down mode */ - - tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); - tmp &= ~(S5P_CENTRAL_LOWPWR_CFG); - __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); - - /* Setting Central Sequence option Register */ - - tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION); - tmp &= ~(S5P_USE_MASK); - tmp |= S5P_USE_STANDBY_WFI0; - __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); - - /* Clear all interrupt pending to avoid early wakeup */ - - __raw_writel(mask, (S5P_VA_GIC_DIST + 0x280)); - __raw_writel(mask, (S5P_VA_GIC_DIST + 0x284)); - __raw_writel(mask, (S5P_VA_GIC_DIST + 0x288)); - - /* Disable all interrupt */ - - __raw_writel(0x0, (S5P_VA_GIC_CPU + 0x000)); - __raw_writel(0x0, (S5P_VA_GIC_DIST + 0x000)); - __raw_writel(mask, (S5P_VA_GIC_DIST + 0x184)); - __raw_writel(mask, (S5P_VA_GIC_DIST + 0x188)); - outer_flush_all(); /* issue the standby signal into the pm unit. */ @@ -326,12 +250,14 @@ static void exynos4_pm_prepare(void) s3c_pm_do_save(exynos4_core_save, ARRAY_SIZE(exynos4_core_save)); s3c_pm_do_save(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); + s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save)); + s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save)); tmp = __raw_readl(S5P_INFORM1); /* Set value of power down register for sleep mode */ - s3c_pm_do_restore_core(exynos4_sleep, ARRAY_SIZE(exynos4_sleep)); + exynos4_sys_powerdown_conf(SYS_SLEEP); __raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1); /* ensure at least INFORM0 has the resume address */ @@ -373,12 +299,80 @@ void exynos4_scu_enable(void __iomem *scu_base) flush_cache_all(); } +static unsigned long pll_base_rate; + +static void exynos4_restore_pll(void) +{ + unsigned long pll_con, locktime, lockcnt; + unsigned long pll_in_rate; + unsigned int p_div, epll_wait = 0, vpll_wait = 0; + + if (pll_base_rate == 0) + return; + + pll_in_rate = pll_base_rate; + + /* EPLL */ + pll_con = exynos4_epll_save[0].val; + + if (pll_con & (1 << 31)) { + pll_con &= (PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT); + p_div = (pll_con >> PLL46XX_PDIV_SHIFT); + + pll_in_rate /= 1000000; + + locktime = (3000 / pll_in_rate) * p_div; + lockcnt = locktime * 10000 / (10000 / pll_in_rate); + + __raw_writel(lockcnt, S5P_EPLL_LOCK); + + s3c_pm_do_restore_core(exynos4_epll_save, + ARRAY_SIZE(exynos4_epll_save)); + epll_wait = 1; + } + + pll_in_rate = pll_base_rate; + + /* VPLL */ + pll_con = exynos4_vpll_save[0].val; + + if (pll_con & (1 << 31)) { + pll_in_rate /= 1000000; + /* 750us */ + locktime = 750; + lockcnt = locktime * 10000 / (10000 / pll_in_rate); + + __raw_writel(lockcnt, S5P_VPLL_LOCK); + + s3c_pm_do_restore_core(exynos4_vpll_save, + ARRAY_SIZE(exynos4_vpll_save)); + vpll_wait = 1; + } + + /* Wait PLL locking */ + + do { + if (epll_wait) { + pll_con = __raw_readl(S5P_EPLL_CON0); + if (pll_con & (1 << S5P_EPLLCON0_LOCKED_SHIFT)) + epll_wait = 0; + } + + if (vpll_wait) { + pll_con = __raw_readl(S5P_VPLL_CON0); + if (pll_con & (1 << S5P_VPLLCON0_LOCKED_SHIFT)) + vpll_wait = 0; + } + } while (epll_wait || vpll_wait); +} + static struct sysdev_driver exynos4_pm_driver = { .add = exynos4_pm_add, }; static __init int exynos4_pm_drvinit(void) { + struct clk *pll_base; unsigned int tmp; s3c_pm_init(); @@ -389,12 +383,69 @@ static __init int exynos4_pm_drvinit(void) tmp |= ((0xFF << 8) | (0x1F << 1)); __raw_writel(tmp, S5P_WAKEUP_MASK); + pll_base = clk_get(NULL, "xtal"); + + if (!IS_ERR(pll_base)) { + pll_base_rate = clk_get_rate(pll_base); + clk_put(pll_base); + } + return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver); } arch_initcall(exynos4_pm_drvinit); +static int exynos4_pm_suspend(void) +{ + unsigned long tmp; + + /* Setting Central Sequence Register for power down mode */ + + tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); + tmp &= ~S5P_CENTRAL_LOWPWR_CFG; + __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); + + /* Save Power control register */ + asm ("mrc p15, 0, %0, c15, c0, 0" + : "=r" (tmp) : : "cc"); + save_arm_register[0] = tmp; + + /* Save Diagnostic register */ + asm ("mrc p15, 0, %0, c15, c0, 1" + : "=r" (tmp) : : "cc"); + save_arm_register[1] = tmp; + + return 0; +} + static void exynos4_pm_resume(void) { + unsigned long tmp; + + /* + * If PMU failed while entering sleep mode, WFI will be + * ignored by PMU and then exiting cpu_do_idle(). + * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically + * in this situation. + */ + tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); + if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) { + tmp |= S5P_CENTRAL_LOWPWR_CFG; + __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); + /* No need to perform below restore code */ + goto early_wakeup; + } + /* Restore Power control register */ + tmp = save_arm_register[0]; + asm volatile ("mcr p15, 0, %0, c15, c0, 0" + : : "r" (tmp) + : "cc"); + + /* Restore Diagnostic register */ + tmp = save_arm_register[1]; + asm volatile ("mcr p15, 0, %0, c15, c0, 1" + : : "r" (tmp) + : "cc"); + /* For release retention */ __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION); @@ -407,6 +458,8 @@ static void exynos4_pm_resume(void) s3c_pm_do_restore_core(exynos4_core_save, ARRAY_SIZE(exynos4_core_save)); + exynos4_restore_pll(); + exynos4_scu_enable(S5P_VA_SCU); #ifdef CONFIG_CACHE_L2X0 @@ -415,9 +468,13 @@ static void exynos4_pm_resume(void) /* enable L2X0*/ writel_relaxed(1, S5P_VA_L2CC + L2X0_CTRL); #endif + +early_wakeup: + return; } static struct syscore_ops exynos4_pm_syscore_ops = { + .suspend = exynos4_pm_suspend, .resume = exynos4_pm_resume, }; diff --git a/arch/arm/mach-exynos4/pmu.c b/arch/arm/mach-exynos4/pmu.c new file mode 100644 index 000000000000..7ea9eb2a20d2 --- /dev/null +++ b/arch/arm/mach-exynos4/pmu.c @@ -0,0 +1,175 @@ +/* linux/arch/arm/mach-exynos4/pmu.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * EXYNOS4210 - CPU PMU(Power Management Unit) support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/kernel.h> + +#include <mach/regs-clock.h> +#include <mach/pmu.h> + +static void __iomem *sys_powerdown_reg[] = { + S5P_ARM_CORE0_LOWPWR, + S5P_DIS_IRQ_CORE0, + S5P_DIS_IRQ_CENTRAL0, + S5P_ARM_CORE1_LOWPWR, + S5P_DIS_IRQ_CORE1, + S5P_DIS_IRQ_CENTRAL1, + S5P_ARM_COMMON_LOWPWR, + S5P_L2_0_LOWPWR, + S5P_L2_1_LOWPWR, + S5P_CMU_ACLKSTOP_LOWPWR, + S5P_CMU_SCLKSTOP_LOWPWR, + S5P_CMU_RESET_LOWPWR, + S5P_APLL_SYSCLK_LOWPWR, + S5P_MPLL_SYSCLK_LOWPWR, + S5P_VPLL_SYSCLK_LOWPWR, + S5P_EPLL_SYSCLK_LOWPWR, + S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, + S5P_CMU_RESET_GPSALIVE_LOWPWR, + S5P_CMU_CLKSTOP_CAM_LOWPWR, + S5P_CMU_CLKSTOP_TV_LOWPWR, + S5P_CMU_CLKSTOP_MFC_LOWPWR, + S5P_CMU_CLKSTOP_G3D_LOWPWR, + S5P_CMU_CLKSTOP_LCD0_LOWPWR, + S5P_CMU_CLKSTOP_LCD1_LOWPWR, + S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, + S5P_CMU_CLKSTOP_GPS_LOWPWR, + S5P_CMU_RESET_CAM_LOWPWR, + S5P_CMU_RESET_TV_LOWPWR, + S5P_CMU_RESET_MFC_LOWPWR, + S5P_CMU_RESET_G3D_LOWPWR, + S5P_CMU_RESET_LCD0_LOWPWR, + S5P_CMU_RESET_LCD1_LOWPWR, + S5P_CMU_RESET_MAUDIO_LOWPWR, + S5P_CMU_RESET_GPS_LOWPWR, + S5P_TOP_BUS_LOWPWR, + S5P_TOP_RETENTION_LOWPWR, + S5P_TOP_PWR_LOWPWR, + S5P_LOGIC_RESET_LOWPWR, + S5P_ONENAND_MEM_LOWPWR, + S5P_MODIMIF_MEM_LOWPWR, + S5P_G2D_ACP_MEM_LOWPWR, + S5P_USBOTG_MEM_LOWPWR, + S5P_HSMMC_MEM_LOWPWR, + S5P_CSSYS_MEM_LOWPWR, + S5P_SECSS_MEM_LOWPWR, + S5P_PCIE_MEM_LOWPWR, + S5P_SATA_MEM_LOWPWR, + S5P_PAD_RETENTION_DRAM_LOWPWR, + S5P_PAD_RETENTION_MAUDIO_LOWPWR, + S5P_PAD_RETENTION_GPIO_LOWPWR, + S5P_PAD_RETENTION_UART_LOWPWR, + S5P_PAD_RETENTION_MMCA_LOWPWR, + S5P_PAD_RETENTION_MMCB_LOWPWR, + S5P_PAD_RETENTION_EBIA_LOWPWR, + S5P_PAD_RETENTION_EBIB_LOWPWR, + S5P_PAD_RETENTION_ISOLATION_LOWPWR, + S5P_PAD_RETENTION_ALV_SEL_LOWPWR, + S5P_XUSBXTI_LOWPWR, + S5P_XXTI_LOWPWR, + S5P_EXT_REGULATOR_LOWPWR, + S5P_GPIO_MODE_LOWPWR, + S5P_GPIO_MODE_MAUDIO_LOWPWR, + S5P_CAM_LOWPWR, + S5P_TV_LOWPWR, + S5P_MFC_LOWPWR, + S5P_G3D_LOWPWR, + S5P_LCD0_LOWPWR, + S5P_LCD1_LOWPWR, + S5P_MAUDIO_LOWPWR, + S5P_GPS_LOWPWR, + S5P_GPS_ALIVE_LOWPWR, +}; + +static const unsigned int sys_powerdown_val[][NUM_SYS_POWERDOWN] = { + /* { AFTR, LPA, SLEEP }*/ + { 0, 0, 2 }, /* ARM_CORE0 */ + { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE0 */ + { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL0 */ + { 0, 0, 2 }, /* ARM_CORE1 */ + { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE1 */ + { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL1 */ + { 0, 0, 2 }, /* ARM_COMMON */ + { 2, 2, 3 }, /* ARM_CPU_L2_0 */ + { 2, 2, 3 }, /* ARM_CPU_L2_1 */ + { 1, 0, 0 }, /* CMU_ACLKSTOP */ + { 1, 0, 0 }, /* CMU_SCLKSTOP */ + { 1, 1, 0 }, /* CMU_RESET */ + { 1, 0, 0 }, /* APLL_SYSCLK */ + { 1, 0, 0 }, /* MPLL_SYSCLK */ + { 1, 0, 0 }, /* VPLL_SYSCLK */ + { 1, 1, 0 }, /* EPLL_SYSCLK */ + { 1, 1, 0 }, /* CMU_CLKSTOP_GPS_ALIVE */ + { 1, 1, 0 }, /* CMU_RESET_GPS_ALIVE */ + { 1, 1, 0 }, /* CMU_CLKSTOP_CAM */ + { 1, 1, 0 }, /* CMU_CLKSTOP_TV */ + { 1, 1, 0 }, /* CMU_CLKSTOP_MFC */ + { 1, 1, 0 }, /* CMU_CLKSTOP_G3D */ + { 1, 1, 0 }, /* CMU_CLKSTOP_LCD0 */ + { 1, 1, 0 }, /* CMU_CLKSTOP_LCD1 */ + { 1, 1, 0 }, /* CMU_CLKSTOP_MAUDIO */ + { 1, 1, 0 }, /* CMU_CLKSTOP_GPS */ + { 1, 1, 0 }, /* CMU_RESET_CAM */ + { 1, 1, 0 }, /* CMU_RESET_TV */ + { 1, 1, 0 }, /* CMU_RESET_MFC */ + { 1, 1, 0 }, /* CMU_RESET_G3D */ + { 1, 1, 0 }, /* CMU_RESET_LCD0 */ + { 1, 1, 0 }, /* CMU_RESET_LCD1 */ + { 1, 1, 0 }, /* CMU_RESET_MAUDIO */ + { 1, 1, 0 }, /* CMU_RESET_GPS */ + { 3, 0, 0 }, /* TOP_BUS */ + { 1, 0, 1 }, /* TOP_RETENTION */ + { 3, 0, 3 }, /* TOP_PWR */ + { 1, 1, 0 }, /* LOGIC_RESET */ + { 3, 0, 0 }, /* ONENAND_MEM */ + { 3, 0, 0 }, /* MODIMIF_MEM */ + { 3, 0, 0 }, /* G2D_ACP_MEM */ + { 3, 0, 0 }, /* USBOTG_MEM */ + { 3, 0, 0 }, /* HSMMC_MEM */ + { 3, 0, 0 }, /* CSSYS_MEM */ + { 3, 0, 0 }, /* SECSS_MEM */ + { 3, 0, 0 }, /* PCIE_MEM */ + { 3, 0, 0 }, /* SATA_MEM */ + { 1, 0, 0 }, /* PAD_RETENTION_DRAM */ + { 1, 1, 0 }, /* PAD_RETENTION_MAUDIO */ + { 1, 0, 0 }, /* PAD_RETENTION_GPIO */ + { 1, 0, 0 }, /* PAD_RETENTION_UART */ + { 1, 0, 0 }, /* PAD_RETENTION_MMCA */ + { 1, 0, 0 }, /* PAD_RETENTION_MMCB */ + { 1, 0, 0 }, /* PAD_RETENTION_EBIA */ + { 1, 0, 0 }, /* PAD_RETENTION_EBIB */ + { 1, 0, 0 }, /* PAD_RETENTION_ISOLATION */ + { 1, 0, 0 }, /* PAD_RETENTION_ALV_SEL */ + { 1, 1, 0 }, /* XUSBXTI */ + { 1, 1, 0 }, /* XXTI */ + { 1, 1, 0 }, /* EXT_REGULATOR */ + { 1, 0, 0 }, /* GPIO_MODE */ + { 1, 1, 0 }, /* GPIO_MODE_MAUDIO */ + { 7, 0, 0 }, /* CAM */ + { 7, 0, 0 }, /* TV */ + { 7, 0, 0 }, /* MFC */ + { 7, 0, 0 }, /* G3D */ + { 7, 0, 0 }, /* LCD0 */ + { 7, 0, 0 }, /* LCD1 */ + { 7, 7, 0 }, /* MAUDIO */ + { 7, 0, 0 }, /* GPS */ + { 7, 0, 0 }, /* GPS_ALIVE */ +}; + +void exynos4_sys_powerdown_conf(enum sys_powerdown mode) +{ + unsigned int count = ARRAY_SIZE(sys_powerdown_reg); + + for (; count > 0; count--) + __raw_writel(sys_powerdown_val[count - 1][mode], + sys_powerdown_reg[count - 1]); +} diff --git a/arch/arm/mach-exynos4/setup-fimd0.c b/arch/arm/mach-exynos4/setup-fimd0.c new file mode 100644 index 000000000000..07a6dbeecdd0 --- /dev/null +++ b/arch/arm/mach-exynos4/setup-fimd0.c @@ -0,0 +1,43 @@ +/* linux/arch/arm/mach-exynos4/setup-fimd0.c + * + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Base Exynos4 FIMD 0 configuration + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/fb.h> +#include <linux/gpio.h> + +#include <plat/gpio-cfg.h> +#include <plat/regs-fb-v4.h> + +#include <mach/map.h> + +void exynos4_fimd0_gpio_setup_24bpp(void) +{ + unsigned int reg; + + s3c_gpio_cfgrange_nopull(EXYNOS4_GPF0(0), 8, S3C_GPIO_SFN(2)); + s3c_gpio_cfgrange_nopull(EXYNOS4_GPF1(0), 8, S3C_GPIO_SFN(2)); + s3c_gpio_cfgrange_nopull(EXYNOS4_GPF2(0), 8, S3C_GPIO_SFN(2)); + s3c_gpio_cfgrange_nopull(EXYNOS4_GPF3(0), 4, S3C_GPIO_SFN(2)); + + /* + * Set DISPLAY_CONTROL register for Display path selection. + * + * DISPLAY_CONTROL[1:0] + * --------------------- + * 00 | MIE + * 01 | MDINE + * 10 | FIMD : selected + * 11 | FIMD + */ + reg = __raw_readl(S3C_VA_SYS + 0x0210); + reg |= (1 << 1); + __raw_writel(reg, S3C_VA_SYS + 0x0210); +} diff --git a/arch/arm/mach-exynos4/time.c b/arch/arm/mach-exynos4/time.c deleted file mode 100644 index ebb8f38d5405..000000000000 --- a/arch/arm/mach-exynos4/time.c +++ /dev/null @@ -1,301 +0,0 @@ -/* linux/arch/arm/mach-exynos4/time.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 (and compatible) HRT support - * PWM 2/4 is used for this feature - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/clockchips.h> -#include <linux/platform_device.h> - -#include <asm/smp_twd.h> - -#include <mach/map.h> -#include <plat/regs-timer.h> -#include <asm/mach/time.h> - -static unsigned long clock_count_per_tick; - -static struct clk *tin2; -static struct clk *tin4; -static struct clk *tdiv2; -static struct clk *tdiv4; -static struct clk *timerclk; - -static void exynos4_pwm_stop(unsigned int pwm_id) -{ - unsigned long tcon; - - tcon = __raw_readl(S3C2410_TCON); - - switch (pwm_id) { - case 2: - tcon &= ~S3C2410_TCON_T2START; - break; - case 4: - tcon &= ~S3C2410_TCON_T4START; - break; - default: - break; - } - __raw_writel(tcon, S3C2410_TCON); -} - -static void exynos4_pwm_init(unsigned int pwm_id, unsigned long tcnt) -{ - unsigned long tcon; - - tcon = __raw_readl(S3C2410_TCON); - - /* timers reload after counting zero, so reduce the count by 1 */ - tcnt--; - - /* ensure timer is stopped... */ - switch (pwm_id) { - case 2: - tcon &= ~(0xf<<12); - tcon |= S3C2410_TCON_T2MANUALUPD; - - __raw_writel(tcnt, S3C2410_TCNTB(2)); - __raw_writel(tcnt, S3C2410_TCMPB(2)); - __raw_writel(tcon, S3C2410_TCON); - - break; - case 4: - tcon &= ~(7<<20); - tcon |= S3C2410_TCON_T4MANUALUPD; - - __raw_writel(tcnt, S3C2410_TCNTB(4)); - __raw_writel(tcnt, S3C2410_TCMPB(4)); - __raw_writel(tcon, S3C2410_TCON); - - break; - default: - break; - } -} - -static inline void exynos4_pwm_start(unsigned int pwm_id, bool periodic) -{ - unsigned long tcon; - - tcon = __raw_readl(S3C2410_TCON); - - switch (pwm_id) { - case 2: - tcon |= S3C2410_TCON_T2START; - tcon &= ~S3C2410_TCON_T2MANUALUPD; - - if (periodic) - tcon |= S3C2410_TCON_T2RELOAD; - else - tcon &= ~S3C2410_TCON_T2RELOAD; - break; - case 4: - tcon |= S3C2410_TCON_T4START; - tcon &= ~S3C2410_TCON_T4MANUALUPD; - - if (periodic) - tcon |= S3C2410_TCON_T4RELOAD; - else - tcon &= ~S3C2410_TCON_T4RELOAD; - break; - default: - break; - } - __raw_writel(tcon, S3C2410_TCON); -} - -static int exynos4_pwm_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - exynos4_pwm_init(2, cycles); - exynos4_pwm_start(2, 0); - return 0; -} - -static void exynos4_pwm_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - exynos4_pwm_stop(2); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - exynos4_pwm_init(2, clock_count_per_tick); - exynos4_pwm_start(2, 1); - break; - case CLOCK_EVT_MODE_ONESHOT: - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static struct clock_event_device pwm_event_device = { - .name = "pwm_timer2", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .shift = 32, - .set_next_event = exynos4_pwm_set_next_event, - .set_mode = exynos4_pwm_set_mode, -}; - -irqreturn_t exynos4_clock_event_isr(int irq, void *dev_id) -{ - struct clock_event_device *evt = &pwm_event_device; - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction exynos4_clock_event_irq = { - .name = "pwm_timer2_irq", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = exynos4_clock_event_isr, -}; - -static void __init exynos4_clockevent_init(void) -{ - unsigned long pclk; - unsigned long clock_rate; - struct clk *tscaler; - - pclk = clk_get_rate(timerclk); - - /* configure clock tick */ - - tscaler = clk_get_parent(tdiv2); - - clk_set_rate(tscaler, pclk / 2); - clk_set_rate(tdiv2, pclk / 2); - clk_set_parent(tin2, tdiv2); - - clock_rate = clk_get_rate(tin2); - - clock_count_per_tick = clock_rate / HZ; - - pwm_event_device.mult = - div_sc(clock_rate, NSEC_PER_SEC, pwm_event_device.shift); - pwm_event_device.max_delta_ns = - clockevent_delta2ns(-1, &pwm_event_device); - pwm_event_device.min_delta_ns = - clockevent_delta2ns(1, &pwm_event_device); - - pwm_event_device.cpumask = cpumask_of(0); - clockevents_register_device(&pwm_event_device); - - setup_irq(IRQ_TIMER2, &exynos4_clock_event_irq); -} - -static cycle_t exynos4_pwm4_read(struct clocksource *cs) -{ - return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40)); -} - -#ifdef CONFIG_PM -static void exynos4_pwm4_resume(struct clocksource *cs) -{ - unsigned long pclk; - - pclk = clk_get_rate(timerclk); - - clk_set_rate(tdiv4, pclk / 2); - clk_set_parent(tin4, tdiv4); - - exynos4_pwm_init(4, ~0); - exynos4_pwm_start(4, 1); -} -#endif - -struct clocksource pwm_clocksource = { - .name = "pwm_timer4", - .rating = 250, - .read = exynos4_pwm4_read, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS , -#ifdef CONFIG_PM - .resume = exynos4_pwm4_resume, -#endif -}; - -static void __init exynos4_clocksource_init(void) -{ - unsigned long pclk; - unsigned long clock_rate; - - pclk = clk_get_rate(timerclk); - - clk_set_rate(tdiv4, pclk / 2); - clk_set_parent(tin4, tdiv4); - - clock_rate = clk_get_rate(tin4); - - exynos4_pwm_init(4, ~0); - exynos4_pwm_start(4, 1); - - if (clocksource_register_hz(&pwm_clocksource, clock_rate)) - panic("%s: can't register clocksource\n", pwm_clocksource.name); -} - -static void __init exynos4_timer_resources(void) -{ - struct platform_device tmpdev; - - tmpdev.dev.bus = &platform_bus_type; - - timerclk = clk_get(NULL, "timers"); - if (IS_ERR(timerclk)) - panic("failed to get timers clock for system timer"); - - clk_enable(timerclk); - - tmpdev.id = 2; - tin2 = clk_get(&tmpdev.dev, "pwm-tin"); - if (IS_ERR(tin2)) - panic("failed to get pwm-tin2 clock for system timer"); - - tdiv2 = clk_get(&tmpdev.dev, "pwm-tdiv"); - if (IS_ERR(tdiv2)) - panic("failed to get pwm-tdiv2 clock for system timer"); - clk_enable(tin2); - - tmpdev.id = 4; - tin4 = clk_get(&tmpdev.dev, "pwm-tin"); - if (IS_ERR(tin4)) - panic("failed to get pwm-tin4 clock for system timer"); - - tdiv4 = clk_get(&tmpdev.dev, "pwm-tdiv"); - if (IS_ERR(tdiv4)) - panic("failed to get pwm-tdiv4 clock for system timer"); - - clk_enable(tin4); -} - -static void __init exynos4_timer_init(void) -{ -#ifdef CONFIG_LOCAL_TIMERS - twd_base = S5P_VA_TWD; -#endif - - exynos4_timer_resources(); - exynos4_clockevent_init(); - exynos4_clocksource_init(); -} - -struct sys_timer exynos4_timer = { - .init = exynos4_timer_init, -}; diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index e8dd22fa7d61..0519dd7f034b 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -278,6 +278,7 @@ config MACH_MX27_3DS select SOC_IMX27 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index b31d4129e10e..6fa6934ab150 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -29,6 +29,7 @@ #include <linux/mfd/mc13783.h> #include <linux/spi/spi.h> #include <linux/regulator/machine.h> +#include <linux/spi/l4f00242t03.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -47,7 +48,10 @@ #define SPI2_SS0 IMX_GPIO_NR(4, 21) #define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28)) #define PMIC_INT IMX_GPIO_NR(3, 14) +#define SPI1_SS0 IMX_GPIO_NR(4, 28) #define SD1_CD IMX_GPIO_NR(2, 26) +#define LCD_RESET IMX_GPIO_NR(1, 3) +#define LCD_ENABLE IMX_GPIO_NR(1, 31) static const int mx27pdk_pins[] __initconst = { /* UART1 */ @@ -96,6 +100,12 @@ static const int mx27pdk_pins[] __initconst = { PE2_PF_USBOTG_DIR, PE24_PF_USBOTG_CLK, PE25_PF_USBOTG_DATA7, + /* CSPI1 */ + PD31_PF_CSPI1_MOSI, + PD30_PF_CSPI1_MISO, + PD29_PF_CSPI1_SCLK, + PD25_PF_CSPI1_RDY, + SPI1_SS0 | GPIO_GPIO | GPIO_OUT, /* CSPI2 */ PD22_PF_CSPI2_SCLK, PD23_PF_CSPI2_MISO, @@ -106,6 +116,31 @@ static const int mx27pdk_pins[] __initconst = { PD18_PF_I2C_CLK, /* PMIC INT */ PMIC_INT | GPIO_GPIO | GPIO_IN, + /* LCD */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + LCD_ENABLE | GPIO_GPIO | GPIO_OUT, + LCD_RESET | GPIO_GPIO | GPIO_OUT, }; static const struct imxuart_platform_data uart_pdata __initconst = { @@ -258,10 +293,18 @@ static struct mc13xxx_platform_data mc13783_pdata = { .num_regulators = ARRAY_SIZE(mx27_3ds_regulators), }, - .flags = MC13783_USE_REGULATOR, + .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN | + MC13783_USE_RTC, }; /* SPI */ +static int spi1_chipselect[] = {SPI1_SS0}; + +static const struct spi_imx_master spi1_pdata __initconst = { + .chipselect = spi1_chipselect, + .num_chipselect = ARRAY_SIZE(spi1_chipselect), +}; + static int spi2_chipselect[] = {SPI2_SS0}; static const struct spi_imx_master spi2_pdata __initconst = { @@ -269,6 +312,46 @@ static const struct spi_imx_master spi2_pdata __initconst = { .num_chipselect = ARRAY_SIZE(spi2_chipselect), }; +static struct imx_fb_videomode mx27_3ds_modes[] = { + { /* 480x640 @ 60 Hz */ + .mode = { + .name = "Epson-VGA", + .refresh = 60, + .xres = 480, + .yres = 640, + .pixclock = 41701, + .left_margin = 20, + .right_margin = 41, + .upper_margin = 10, + .lower_margin = 5, + .hsync_len = 20, + .vsync_len = 10, + .sync = FB_SYNC_OE_ACT_HIGH | + FB_SYNC_CLK_INVERT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, + .bpp = 16, + .pcr = 0xFAC08B82, + }, +}; + +static const struct imx_fb_platform_data mx27_3ds_fb_data __initconst = { + .mode = mx27_3ds_modes, + .num_modes = ARRAY_SIZE(mx27_3ds_modes), + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00020010, +}; + +/* LCD */ +static struct l4f00242t03_pdata mx27_3ds_lcd_pdata = { + .reset_gpio = LCD_RESET, + .data_enable_gpio = LCD_ENABLE, + .core_supply = "lcd_2v8", + .io_supply = "vdd_lcdio", +}; + static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { { .modalias = "mc13783", @@ -278,6 +361,12 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { .platform_data = &mc13783_pdata, .irq = gpio_to_irq(PMIC_INT), .mode = SPI_CS_HIGH, + }, { + .modalias = "l4f00242t03", + .max_speed_hz = 5000000, + .bus_num = 0, + .chip_select = 0, /* SS0 */ + .platform_data = &mx27_3ds_lcd_pdata, }, }; @@ -311,12 +400,14 @@ static void __init mx27pdk_init(void) imx27_add_fsl_usb2_udc(&otg_device_pdata); imx27_add_spi_imx1(&spi2_pdata); + imx27_add_spi_imx0(&spi1_pdata); spi_register_board_info(mx27_3ds_spi_devs, ARRAY_SIZE(mx27_3ds_spi_devs)); if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT)) pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n"); imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data); + imx27_add_imx_fb(&mx27_3ds_fb_data); } static void __init mx27pdk_timer_init(void) diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 6d7d518686a5..3f05dfebacc9 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -22,6 +22,7 @@ #include <linux/init.h> #include <mach/hardware.h> #include <mach/common.h> +#include <mach/devices-common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> #include <mach/irqs.h> @@ -82,4 +83,6 @@ void __init imx21_soc_init(void) mxc_register_gpio("imx21-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + + imx_add_imx_dma(); } diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index 9a1591c2508d..8bf029164652 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -24,6 +24,7 @@ #include <asm/mach/map.h> #include <mach/common.h> +#include <mach/devices-common.h> #include <mach/hardware.h> #include <mach/mx25.h> #include <mach/iomux-v3.h> @@ -61,6 +62,28 @@ void __init mx25_init_irq(void) mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR)); } +static struct sdma_script_start_addrs imx25_sdma_script __initdata = { + .ap_2_ap_addr = 729, + .uart_2_mcu_addr = 904, + .per_2_app_addr = 1255, + .mcu_2_app_addr = 834, + .uartsh_2_mcu_addr = 1120, + .per_2_shp_addr = 1329, + .mcu_2_shp_addr = 1048, + .ata_2_mcu_addr = 1560, + .mcu_2_ata_addr = 1479, + .app_2_per_addr = 1189, + .app_2_mcu_addr = 770, + .shp_2_per_addr = 1407, + .shp_2_mcu_addr = 979, +}; + +static struct sdma_platform_data imx25_sdma_pdata __initdata = { + .sdma_version = 2, + .fw_name = "sdma-imx25.bin", + .script_addrs = &imx25_sdma_script, +}; + void __init imx25_soc_init(void) { /* i.mx25 has the i.mx31 type gpio */ @@ -68,4 +91,6 @@ void __init imx25_soc_init(void) mxc_register_gpio("imx31-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0); mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0); mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0); + + imx_add_imx_sdma(MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata); } diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index 133b30003ddb..96dd1f5ea7bd 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -22,6 +22,7 @@ #include <linux/init.h> #include <mach/hardware.h> #include <mach/common.h> +#include <mach/devices-common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> #include <mach/irqs.h> @@ -83,4 +84,6 @@ void __init imx27_soc_init(void) mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + + imx_add_imx_dma(); } diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c index 6d103c01b8b9..61bff38cb955 100644 --- a/arch/arm/mach-imx/mm-imx31.c +++ b/arch/arm/mach-imx/mm-imx31.c @@ -24,6 +24,7 @@ #include <asm/mach/map.h> #include <mach/common.h> +#include <mach/devices-common.h> #include <mach/hardware.h> #include <mach/iomux-v3.h> #include <mach/irqs.h> @@ -57,9 +58,35 @@ void __init mx31_init_irq(void) mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); } +static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = { + .per_2_per_addr = 1677, +}; + +static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = { + .ap_2_ap_addr = 423, + .ap_2_bp_addr = 829, + .bp_2_ap_addr = 1029, +}; + +static struct sdma_platform_data imx31_sdma_pdata __initdata = { + .sdma_version = 1, + .fw_name = "sdma-imx31-to2.bin", + .script_addrs = &imx31_to2_sdma_script, +}; + void __init imx31_soc_init(void) { + int to_version = mx31_revision() >> 4; + mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0); mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); + + if (to_version == 1) { + strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin", + strlen(imx31_sdma_pdata.fw_name)); + imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script; + } + + imx_add_imx_sdma(MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata); } diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c index bb068bc8dab7..98769ae34377 100644 --- a/arch/arm/mach-imx/mm-imx35.c +++ b/arch/arm/mach-imx/mm-imx35.c @@ -25,6 +25,7 @@ #include <asm/hardware/cache-l2x0.h> #include <mach/common.h> +#include <mach/devices-common.h> #include <mach/hardware.h> #include <mach/iomux-v3.h> #include <mach/irqs.h> @@ -54,10 +55,56 @@ void __init mx35_init_irq(void) mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); } +static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = { + .ap_2_ap_addr = 642, + .uart_2_mcu_addr = 817, + .mcu_2_app_addr = 747, + .uartsh_2_mcu_addr = 1183, + .per_2_shp_addr = 1033, + .mcu_2_shp_addr = 961, + .ata_2_mcu_addr = 1333, + .mcu_2_ata_addr = 1252, + .app_2_mcu_addr = 683, + .shp_2_per_addr = 1111, + .shp_2_mcu_addr = 892, +}; + +static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = { + .ap_2_ap_addr = 729, + .uart_2_mcu_addr = 904, + .per_2_app_addr = 1597, + .mcu_2_app_addr = 834, + .uartsh_2_mcu_addr = 1270, + .per_2_shp_addr = 1120, + .mcu_2_shp_addr = 1048, + .ata_2_mcu_addr = 1429, + .mcu_2_ata_addr = 1339, + .app_2_per_addr = 1531, + .app_2_mcu_addr = 770, + .shp_2_per_addr = 1198, + .shp_2_mcu_addr = 979, +}; + +static struct sdma_platform_data imx35_sdma_pdata __initdata = { + .sdma_version = 2, + .fw_name = "sdma-imx35-to2.bin", + .script_addrs = &imx35_to2_sdma_script, +}; + void __init imx35_soc_init(void) { + int to_version = mx35_revision() >> 4; + /* i.mx35 has the i.mx31 type gpio */ mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); + + if (to_version == 1) { + strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin", + strlen(imx35_sdma_pdata.fw_name)); + imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script; + } + + imx_add_imx_sdma(MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata); } diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index da0e6498110a..1e027514096d 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -1077,7 +1077,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand) _REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0) _REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1) - _REGISTER_CLOCK("lpc32xx-ts", NULL, clk_tsc) + _REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc) _REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc) _REGISTER_CLOCK("lpc-net.0", NULL, clk_net) _REGISTER_CLOCK("dev:clcd", NULL, clk_lcd) diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index ee24dc28e93e..205b2dbb565b 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c @@ -95,6 +95,48 @@ struct platform_device lpc32xx_i2c2_device = { }, }; +/* TSC (Touch Screen Controller) */ + +static struct resource lpc32xx_tsc_resources[] = { + { + .start = LPC32XX_ADC_BASE, + .end = LPC32XX_ADC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_LPC32XX_TS_IRQ, + .end = IRQ_LPC32XX_TS_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device lpc32xx_tsc_device = { + .name = "ts-lpc32xx", + .id = -1, + .num_resources = ARRAY_SIZE(lpc32xx_tsc_resources), + .resource = lpc32xx_tsc_resources, +}; + +/* RTC */ + +static struct resource lpc32xx_rtc_resources[] = { + { + .start = LPC32XX_RTC_BASE, + .end = LPC32XX_RTC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_LPC32XX_RTC, + .end = IRQ_LPC32XX_RTC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device lpc32xx_rtc_device = { + .name = "rtc-lpc32xx", + .id = -1, + .num_resources = ARRAY_SIZE(lpc32xx_rtc_resources), + .resource = lpc32xx_rtc_resources, +}; + /* * Returns the unique ID for the device */ diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h index f82211fd80c1..5583f52662bd 100644 --- a/arch/arm/mach-lpc32xx/common.h +++ b/arch/arm/mach-lpc32xx/common.h @@ -28,6 +28,8 @@ extern struct platform_device lpc32xx_watchdog_device; extern struct platform_device lpc32xx_i2c0_device; extern struct platform_device lpc32xx_i2c1_device; extern struct platform_device lpc32xx_i2c2_device; +extern struct platform_device lpc32xx_tsc_device; +extern struct platform_device lpc32xx_rtc_device; /* * Other arch specific structures and functions diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 67793a690272..56ef5f6c8116 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -77,6 +77,13 @@ config MACH_TETON_BGA Say 'Y' here if you want to support the Marvell PXA168-based Teton BGA Development Board. +config MACH_SHEEVAD + bool "Marvell's PXA168 GuruPlug Display (gplugD) Board" + select CPU_PXA168 + help + Say 'Y' here if you want to support the Marvell PXA168-based + GuruPlug Display (gplugD) Board + endmenu config CPU_PXA168 diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index 5c68382141af..b0ac942327aa 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -19,3 +19,4 @@ obj-$(CONFIG_MACH_BROWNSTONE) += brownstone.o obj-$(CONFIG_MACH_FLINT) += flint.o obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o +obj-$(CONFIG_MACH_SHEEVAD) += gplugd.o diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c index 886e05648f08..7c6f95f29142 100644 --- a/arch/arm/mach-mmp/clock.c +++ b/arch/arm/mach-mmp/clock.c @@ -88,3 +88,18 @@ unsigned long clk_get_rate(struct clk *clk) return rate; } EXPORT_SYMBOL(clk_get_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + int ret = -EINVAL; + + if (clk->ops->setrate) { + spin_lock_irqsave(&clocks_lock, flags); + ret = clk->ops->setrate(clk, rate); + spin_unlock_irqrestore(&clocks_lock, flags); + } + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h index 9b027d7491f5..3143e994e672 100644 --- a/arch/arm/mach-mmp/clock.h +++ b/arch/arm/mach-mmp/clock.h @@ -12,6 +12,7 @@ struct clkops { void (*enable)(struct clk *); void (*disable)(struct clk *); unsigned long (*getrate)(struct clk *); + int (*setrate)(struct clk *, unsigned long); }; struct clk { diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c new file mode 100644 index 000000000000..c070c24255f4 --- /dev/null +++ b/arch/arm/mach-mmp/gplugd.c @@ -0,0 +1,189 @@ +/* + * linux/arch/arm/mach-mmp/gplugd.c + * + * Support for the Marvell PXA168-based GuruPlug Display (gplugD) Platform. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include <linux/init.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <mach/gpio.h> +#include <mach/pxa168.h> +#include <mach/mfp-pxa168.h> +#include <mach/mfp-gplugd.h> + +#include "common.h" + +static unsigned long gplugd_pin_config[] __initdata = { + /* UART3 */ + GPIO8_UART3_SOUT, + GPIO9_UART3_SIN, + GPI1O_UART3_CTS, + GPI11_UART3_RTS, + + /* MMC2 */ + GPIO28_MMC2_CMD, + GPIO29_MMC2_CLK, + GPIO30_MMC2_DAT0, + GPIO31_MMC2_DAT1, + GPIO32_MMC2_DAT2, + GPIO33_MMC2_DAT3, + + /* LCD & HDMI clock selection GPIO: 0: 74.176MHz, 1: 74.25 MHz */ + GPIO35_GPIO, + GPIO36_GPIO, /* CEC Interrupt */ + + /* MMC1 */ + GPIO43_MMC1_CLK, + GPIO49_MMC1_CMD, + GPIO41_MMC1_DAT0, + GPIO40_MMC1_DAT1, + GPIO52_MMC1_DAT2, + GPIO51_MMC1_DAT3, + GPIO53_MMC1_CD, + + /* LCD */ + GPIO56_LCD_FCLK_RD, + GPIO57_LCD_LCLK_A0, + GPIO58_LCD_PCLK_WR, + GPIO59_LCD_DENA_BIAS, + GPIO60_LCD_DD0, + GPIO61_LCD_DD1, + GPIO62_LCD_DD2, + GPIO63_LCD_DD3, + GPIO64_LCD_DD4, + GPIO65_LCD_DD5, + GPIO66_LCD_DD6, + GPIO67_LCD_DD7, + GPIO68_LCD_DD8, + GPIO69_LCD_DD9, + GPIO70_LCD_DD10, + GPIO71_LCD_DD11, + GPIO72_LCD_DD12, + GPIO73_LCD_DD13, + GPIO74_LCD_DD14, + GPIO75_LCD_DD15, + GPIO76_LCD_DD16, + GPIO77_LCD_DD17, + GPIO78_LCD_DD18, + GPIO79_LCD_DD19, + GPIO80_LCD_DD20, + GPIO81_LCD_DD21, + GPIO82_LCD_DD22, + GPIO83_LCD_DD23, + + /* GPIO */ + GPIO84_GPIO, + GPIO85_GPIO, + + /* Fast-Ethernet*/ + GPIO86_TX_CLK, + GPIO87_TX_EN, + GPIO88_TX_DQ3, + GPIO89_TX_DQ2, + GPIO90_TX_DQ1, + GPIO91_TX_DQ0, + GPIO92_MII_CRS, + GPIO93_MII_COL, + GPIO94_RX_CLK, + GPIO95_RX_ER, + GPIO96_RX_DQ3, + GPIO97_RX_DQ2, + GPIO98_RX_DQ1, + GPIO99_RX_DQ0, + GPIO100_MII_MDC, + GPIO101_MII_MDIO, + GPIO103_RX_DV, + GPIO104_GPIO, /* Reset PHY */ + + /* RTC interrupt */ + GPIO102_GPIO, + + /* I2C */ + GPIO105_CI2C_SDA, + GPIO106_CI2C_SCL, + + /* Select JTAG */ + GPIO109_GPIO, + + /* I2S */ + GPIO114_I2S_FRM, + GPIO115_I2S_BCLK, + GPIO116_I2S_TXD +}; + +static struct i2c_board_info gplugd_i2c_board_info[] = { + { + .type = "isl1208", + .addr = 0x6F, + } +}; + +/* Bring PHY out of reset by setting GPIO 104 */ +static int gplugd_eth_init(void) +{ + if (unlikely(gpio_request(104, "ETH_RESET_N"))) { + printk(KERN_ERR "Can't get hold of GPIO 104 to bring Ethernet " + "PHY out of reset\n"); + return -EIO; + } + + gpio_direction_output(104, 1); + gpio_free(104); + return 0; +} + +struct pxa168_eth_platform_data gplugd_eth_platform_data = { + .port_number = 0, + .phy_addr = 0, + .speed = 0, /* Autonagotiation */ + .init = gplugd_eth_init, +}; + +static void __init select_disp_freq(void) +{ + /* set GPIO 35 & clear GPIO 85 to set LCD External Clock to 74.25 MHz */ + if (unlikely(gpio_request(35, "DISP_FREQ_SEL"))) { + printk(KERN_ERR "Can't get hold of GPIO 35 to select display " + "frequency\n"); + } else { + gpio_direction_output(35, 1); + gpio_free(104); + } + + if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) { + printk(KERN_ERR "Can't get hold of GPIO 85 to select display " + "frequency\n"); + } else { + gpio_direction_output(85, 0); + gpio_free(104); + } +} + +static void __init gplugd_init(void) +{ + mfp_config(ARRAY_AND_SIZE(gplugd_pin_config)); + + select_disp_freq(); + + /* on-chip devices */ + pxa168_add_uart(3); + pxa168_add_ssp(0); + pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info)); + + pxa168_add_eth(&gplugd_eth_platform_data); +} + +MACHINE_START(SHEEVAD, "PXA168-based GuruPlug Display (gplugD) Platform") + .map_io = mmp_map_io, + .nr_irqs = IRQ_BOARD_START, + .init_irq = pxa168_init_irq, + .timer = &pxa168_timer, + .init_machine = gplugd_init, +MACHINE_END diff --git a/arch/arm/mach-mmp/include/mach/mfp-gplugd.h b/arch/arm/mach-mmp/include/mach/mfp-gplugd.h new file mode 100644 index 000000000000..b8cf38d85600 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/mfp-gplugd.h @@ -0,0 +1,52 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/mfp-gplugd.h + * + * MFP definitions used in gplugD + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_MFP_GPLUGD_H +#define __MACH_MFP_GPLUGD_H + +#include <plat/mfp.h> +#include <mach/mfp.h> + +/* UART3 */ +#define GPIO8_UART3_SOUT MFP_CFG(GPIO8, AF2) +#define GPIO9_UART3_SIN MFP_CFG(GPIO9, AF2) +#define GPI1O_UART3_CTS MFP_CFG(GPIO10, AF2) +#define GPI11_UART3_RTS MFP_CFG(GPIO11, AF2) + +/* MMC2 */ +#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST) +#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST) +#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST) +#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST) +#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST) +#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST) + +/* I2S */ +#undef GPIO114_I2S_FRM +#undef GPIO115_I2S_BCLK + +#define GPIO114_I2S_FRM MFP_CFG_DRV(GPIO114, AF1, FAST) +#define GPIO115_I2S_BCLK MFP_CFG_DRV(GPIO115, AF1, FAST) +#define GPIO116_I2S_TXD MFP_CFG_DRV(GPIO116, AF1, FAST) + +/* MMC4 */ +#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST) +#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST) +#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST) +#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST) +#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST) +#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST) + +/* OTG GPIO */ +#define GPIO_USB_OTG_PEN 18 +#define GPIO_USB_OIDIR 20 + +/* Other GPIOs are 35, 84, 85 */ +#endif /* __MACH_MFP_GPLUGD_H */ diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index 713be155a44d..8c782328b21c 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -305,4 +305,23 @@ #define GPIO112_KP_MKOUT6 MFP_CFG(GPIO112, AF7) #define GPIO121_KP_MKIN4 MFP_CFG(GPIO121, AF7) +/* Fast Ethernet */ +#define GPIO86_TX_CLK MFP_CFG(GPIO86, AF5) +#define GPIO87_TX_EN MFP_CFG(GPIO87, AF5) +#define GPIO88_TX_DQ3 MFP_CFG(GPIO88, AF5) +#define GPIO89_TX_DQ2 MFP_CFG(GPIO89, AF5) +#define GPIO90_TX_DQ1 MFP_CFG(GPIO90, AF5) +#define GPIO91_TX_DQ0 MFP_CFG(GPIO91, AF5) +#define GPIO92_MII_CRS MFP_CFG(GPIO92, AF5) +#define GPIO93_MII_COL MFP_CFG(GPIO93, AF5) +#define GPIO94_RX_CLK MFP_CFG(GPIO94, AF5) +#define GPIO95_RX_ER MFP_CFG(GPIO95, AF5) +#define GPIO96_RX_DQ3 MFP_CFG(GPIO96, AF5) +#define GPIO97_RX_DQ2 MFP_CFG(GPIO97, AF5) +#define GPIO98_RX_DQ1 MFP_CFG(GPIO98, AF5) +#define GPIO99_RX_DQ0 MFP_CFG(GPIO99, AF5) +#define GPIO100_MII_MDC MFP_CFG(GPIO100, AF5) +#define GPIO101_MII_MDIO MFP_CFG(GPIO101, AF5) +#define GPIO103_RX_DV MFP_CFG(GPIO103, AF5) + #endif /* __ASM_MACH_MFP_PXA168_H */ diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index a52b3d2f325c..7f005843a707 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -14,9 +14,11 @@ extern void pxa168_clear_keypad_wakeup(void); #include <video/pxa168fb.h> #include <plat/pxa27x_keypad.h> #include <mach/cputype.h> +#include <linux/pxa168_eth.h> extern struct pxa_device_desc pxa168_device_uart1; extern struct pxa_device_desc pxa168_device_uart2; +extern struct pxa_device_desc pxa168_device_uart3; extern struct pxa_device_desc pxa168_device_twsi0; extern struct pxa_device_desc pxa168_device_twsi1; extern struct pxa_device_desc pxa168_device_pwm1; @@ -31,6 +33,7 @@ extern struct pxa_device_desc pxa168_device_ssp5; extern struct pxa_device_desc pxa168_device_nand; extern struct pxa_device_desc pxa168_device_fb; extern struct pxa_device_desc pxa168_device_keypad; +extern struct pxa_device_desc pxa168_device_eth; static inline int pxa168_add_uart(int id) { @@ -39,6 +42,7 @@ static inline int pxa168_add_uart(int id) switch (id) { case 1: d = &pxa168_device_uart1; break; case 2: d = &pxa168_device_uart2; break; + case 3: d = &pxa168_device_uart3; break; } if (d == NULL) @@ -117,4 +121,8 @@ static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data) return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data)); } +static inline int pxa168_add_eth(struct pxa168_eth_platform_data *data) +{ + return pxa_register_device(&pxa168_device_eth, data, sizeof(*data)); +} #endif /* __ASM_MACH_PXA168_H */ diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h index f7011ef70bf5..8447ac63e28f 100644 --- a/arch/arm/mach-mmp/include/mach/regs-apmu.h +++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h @@ -29,6 +29,7 @@ #define APMU_BUS APMU_REG(0x06c) #define APMU_SDH2 APMU_REG(0x0e8) #define APMU_SDH3 APMU_REG(0x0ec) +#define APMU_ETH APMU_REG(0x0fc) #define APMU_FNCLK_EN (1 << 4) #define APMU_AXICLK_EN (1 << 3) diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index ab9f999106c7..0156f535dae7 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -66,6 +66,7 @@ void __init pxa168_init_irq(void) /* APB peripheral clocks */ static APBC_CLK(uart1, PXA168_UART1, 1, 14745600); static APBC_CLK(uart2, PXA168_UART2, 1, 14745600); +static APBC_CLK(uart3, PXA168_UART3, 1, 14745600); static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000); static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000); static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000); @@ -81,11 +82,13 @@ static APBC_CLK(keypad, PXA168_KPC, 0, 32000); static APMU_CLK(nand, NAND, 0x19b, 156000000); static APMU_CLK(lcd, LCD, 0x7f, 312000000); +static APMU_CLK(eth, ETH, 0x09, 0); /* device and clock bindings */ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), + INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL), INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL), INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL), INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL), @@ -100,6 +103,7 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), + INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), }; static int __init pxa168_init(void) @@ -149,6 +153,7 @@ void pxa168_clear_keypad_wakeup(void) /* on-chip devices */ PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22); PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24); +PXA168_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4026000, 0x30, 23, 24); PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28); PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28); PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10); @@ -163,3 +168,4 @@ PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59); PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61); PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8); PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c); +PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff); diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index e411039ea59e..6bd37a27e5fc 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -15,6 +15,8 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/onenand.h> #include <linux/interrupt.h> +#include <linux/i2c/pca953x.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -25,7 +27,17 @@ #include "common.h" -#define TTCDKB_NR_IRQS (IRQ_BOARD_START + 24) +#define TTCDKB_GPIO_EXT0(x) (NR_BUILTIN_GPIO + ((x < 0) ? 0 : \ + ((x < 16) ? x : 15))) +#define TTCDKB_GPIO_EXT1(x) (NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \ + ((x < 16) ? x : 15))) + +/* + * 16 board interrupts -- MAX7312 GPIO expander + * 16 board interrupts -- PCA9575 GPIO expander + * 24 board interrupts -- 88PM860x PMIC + */ +#define TTCDKB_NR_IRQS (IRQ_BOARD_START + 16 + 16 + 24) static unsigned long ttc_dkb_pin_config[] __initdata = { /* UART2 */ @@ -113,6 +125,22 @@ static struct platform_device *ttc_dkb_devices[] = { &ttc_dkb_device_onenand, }; +static struct pca953x_platform_data max7312_data[] = { + { + .gpio_base = TTCDKB_GPIO_EXT0(0), + .irq_base = IRQ_BOARD_START, + }, +}; + +static struct i2c_board_info ttc_dkb_i2c_info[] = { + { + .type = "max7312", + .addr = 0x23, + .irq = IRQ_GPIO(80), + .platform_data = &max7312_data, + }, +}; + static void __init ttc_dkb_init(void) { mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config)); @@ -121,6 +149,7 @@ static void __init ttc_dkb_init(void) pxa910_add_uart(1); /* off-chip devices */ + pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info)); platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices)); } diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index f25e9d7bf0f5..b4e7c58bbb38 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -180,6 +180,7 @@ config MACH_MX53_EVK select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER help Include support for MX53 EVK platform. This includes specific configurations for the board and its peripherals. @@ -203,10 +204,23 @@ config MACH_MX53_LOCO select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_GPIO_KEYS + select LEDS_GPIO_REGISTER help Include support for MX53 LOCO platform. This includes specific configurations for the board and its peripherals. +config MACH_MX53_ARD + bool "Support MX53 ARD platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_GPIO_KEYS + help + Include support for MX53 ARD platform. This includes specific + configurations for the board and its peripherals. + endif # ARCH_MX53_SUPPORTED endif diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile index 0b9338cec516..383e7cd3fbcb 100644 --- a/arch/arm/mach-mx5/Makefile +++ b/arch/arm/mach-mx5/Makefile @@ -6,12 +6,14 @@ obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o obj-$(CONFIG_SOC_IMX50) += mm-mx50.o +obj-$(CONFIG_PM) += pm-imx5.o obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o +obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index e54e4bf61cfd..15c600026aee 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -41,6 +41,10 @@ #define BABBAGE_POWER_KEY IMX_GPIO_NR(2, 21) #define BABBAGE_ECSPI1_CS0 IMX_GPIO_NR(4, 24) #define BABBAGE_ECSPI1_CS1 IMX_GPIO_NR(4, 25) +#define BABBAGE_SD1_CD IMX_GPIO_NR(1, 0) +#define BABBAGE_SD1_WP IMX_GPIO_NR(1, 1) +#define BABBAGE_SD2_CD IMX_GPIO_NR(1, 6) +#define BABBAGE_SD2_WP IMX_GPIO_NR(1, 5) /* USB_CTRL_1 */ #define MX51_USB_CTRL_1_OFFSET 0x10 @@ -142,6 +146,8 @@ static iomux_v3_cfg_t mx51babbage_pads[] = { MX51_PAD_SD1_DATA1__SD1_DATA1, MX51_PAD_SD1_DATA2__SD1_DATA2, MX51_PAD_SD1_DATA3__SD1_DATA3, + MX51_PAD_GPIO1_0__GPIO1_0, + MX51_PAD_GPIO1_1__GPIO1_1, /* SD 2 */ MX51_PAD_SD2_CMD__SD2_CMD, @@ -150,6 +156,8 @@ static iomux_v3_cfg_t mx51babbage_pads[] = { MX51_PAD_SD2_DATA1__SD2_DATA1, MX51_PAD_SD2_DATA2__SD2_DATA2, MX51_PAD_SD2_DATA3__SD2_DATA3, + MX51_PAD_GPIO1_6__GPIO1_6, + MX51_PAD_GPIO1_5__GPIO1_5, /* eCSPI1 */ MX51_PAD_CSPI1_MISO__ECSPI1_MISO, @@ -331,6 +339,16 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = { .num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs), }; +static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = { + .cd_gpio = BABBAGE_SD1_CD, + .wp_gpio = BABBAGE_SD1_WP, +}; + +static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = { + .cd_gpio = BABBAGE_SD2_CD, + .wp_gpio = BABBAGE_SD2_WP, +}; + /* * Board specific initialization. */ @@ -376,8 +394,8 @@ static void __init mx51_babbage_init(void) mxc_iomux_v3_setup_pad(usbh1stp); babbage_usbhub_reset(); - imx51_add_sdhci_esdhc_imx(0, NULL); - imx51_add_sdhci_esdhc_imx(1, NULL); + imx51_add_sdhci_esdhc_imx(0, &mx51_babbage_sd1_data); + imx51_add_sdhci_esdhc_imx(1, &mx51_babbage_sd2_data); spi_register_board_info(mx51_babbage_spi_board_info, ARRAY_SIZE(mx51_babbage_spi_board_info)); diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c new file mode 100644 index 000000000000..76a67c4a2a0b --- /dev/null +++ b/arch/arm/mach-mx5/board-mx53_ard.c @@ -0,0 +1,254 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/smsc911x.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/iomux-mx53.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include "crm_regs.h" +#include "devices-imx53.h" + +#define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31) +#define ARD_SD1_CD IMX_GPIO_NR(1, 1) +#define ARD_SD1_WP IMX_GPIO_NR(1, 9) +#define ARD_I2CPORTEXP_B IMX_GPIO_NR(2, 3) +#define ARD_VOLUMEDOWN IMX_GPIO_NR(4, 0) +#define ARD_HOME IMX_GPIO_NR(5, 10) +#define ARD_BACK IMX_GPIO_NR(5, 11) +#define ARD_PROG IMX_GPIO_NR(5, 12) +#define ARD_VOLUMEUP IMX_GPIO_NR(5, 13) + +static iomux_v3_cfg_t mx53_ard_pads[] = { + /* UART1 */ + MX53_PAD_PATA_DIOW__UART1_TXD_MUX, + MX53_PAD_PATA_DMACK__UART1_RXD_MUX, + /* WEIM for CS1 */ + MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */ + MX53_PAD_EIM_D16__EMI_WEIM_D_16, + MX53_PAD_EIM_D17__EMI_WEIM_D_17, + MX53_PAD_EIM_D18__EMI_WEIM_D_18, + MX53_PAD_EIM_D19__EMI_WEIM_D_19, + MX53_PAD_EIM_D20__EMI_WEIM_D_20, + MX53_PAD_EIM_D21__EMI_WEIM_D_21, + MX53_PAD_EIM_D22__EMI_WEIM_D_22, + MX53_PAD_EIM_D23__EMI_WEIM_D_23, + MX53_PAD_EIM_D24__EMI_WEIM_D_24, + MX53_PAD_EIM_D25__EMI_WEIM_D_25, + MX53_PAD_EIM_D26__EMI_WEIM_D_26, + MX53_PAD_EIM_D27__EMI_WEIM_D_27, + MX53_PAD_EIM_D28__EMI_WEIM_D_28, + MX53_PAD_EIM_D29__EMI_WEIM_D_29, + MX53_PAD_EIM_D30__EMI_WEIM_D_30, + MX53_PAD_EIM_D31__EMI_WEIM_D_31, + MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0, + MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1, + MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2, + MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3, + MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4, + MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5, + MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6, + MX53_PAD_EIM_OE__EMI_WEIM_OE, + MX53_PAD_EIM_RW__EMI_WEIM_RW, + MX53_PAD_EIM_CS1__EMI_WEIM_CS_1, + /* SDHC1 */ + MX53_PAD_SD1_CMD__ESDHC1_CMD, + MX53_PAD_SD1_CLK__ESDHC1_CLK, + MX53_PAD_SD1_DATA0__ESDHC1_DAT0, + MX53_PAD_SD1_DATA1__ESDHC1_DAT1, + MX53_PAD_SD1_DATA2__ESDHC1_DAT2, + MX53_PAD_SD1_DATA3__ESDHC1_DAT3, + MX53_PAD_PATA_DATA8__ESDHC1_DAT4, + MX53_PAD_PATA_DATA9__ESDHC1_DAT5, + MX53_PAD_PATA_DATA10__ESDHC1_DAT6, + MX53_PAD_PATA_DATA11__ESDHC1_DAT7, + MX53_PAD_GPIO_1__GPIO1_1, + MX53_PAD_GPIO_9__GPIO1_9, + /* I2C2 */ + MX53_PAD_EIM_EB2__I2C2_SCL, + MX53_PAD_KEY_ROW3__I2C2_SDA, + /* I2C3 */ + MX53_PAD_GPIO_3__I2C3_SCL, + MX53_PAD_GPIO_16__I2C3_SDA, + /* GPIO */ + MX53_PAD_DISP0_DAT16__GPIO5_10, /* home */ + MX53_PAD_DISP0_DAT17__GPIO5_11, /* back */ + MX53_PAD_DISP0_DAT18__GPIO5_12, /* prog */ + MX53_PAD_DISP0_DAT19__GPIO5_13, /* vol up */ + MX53_PAD_GPIO_10__GPIO4_0, /* vol down */ +}; + +#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \ +{ \ + .gpio = gpio_num, \ + .type = EV_KEY, \ + .code = ev_code, \ + .active_low = act_low, \ + .desc = "btn " descr, \ + .wakeup = wake, \ +} + +static struct gpio_keys_button ard_buttons[] = { + GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0), + GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0), + GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0), + GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0), + GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0), +}; + +static const struct gpio_keys_platform_data ard_button_data __initconst = { + .buttons = ard_buttons, + .nbuttons = ARRAY_SIZE(ard_buttons), +}; + +static struct resource ard_smsc911x_resources[] = { + { + .start = MX53_CS1_64MB_BASE_ADDR, + .end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = gpio_to_irq(ARD_ETHERNET_INT_B), + .end = gpio_to_irq(ARD_ETHERNET_INT_B), + .flags = IORESOURCE_IRQ, + }, +}; + +struct smsc911x_platform_config ard_smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_32BIT, +}; + +static struct platform_device ard_smsc_lan9220_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(ard_smsc911x_resources), + .resource = ard_smsc911x_resources, + .dev = { + .platform_data = &ard_smsc911x_config, + }, +}; + +static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = { + .cd_gpio = ARD_SD1_CD, + .wp_gpio = ARD_SD1_WP, +}; + +static struct imxi2c_platform_data mx53_ard_i2c2_data = { + .bitrate = 50000, +}; + +static struct imxi2c_platform_data mx53_ard_i2c3_data = { + .bitrate = 400000, +}; + +static void __init mx53_ard_io_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads, + ARRAY_SIZE(mx53_ard_pads)); + + gpio_request(ARD_ETHERNET_INT_B, "eth-int-b"); + gpio_direction_input(ARD_ETHERNET_INT_B); + + gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst"); + gpio_direction_output(ARD_I2CPORTEXP_B, 1); +} + +/* Config CS1 settings for ethernet controller */ +static int weim_cs_config(void) +{ + u32 reg; + void __iomem *weim_base, *iomuxc_base; + + weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K); + if (!weim_base) + return -ENOMEM; + + iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K); + if (!iomuxc_base) + return -ENOMEM; + + /* CS1 timings for LAN9220 */ + writel(0x20001, (weim_base + 0x18)); + writel(0x0, (weim_base + 0x1C)); + writel(0x16000202, (weim_base + 0x20)); + writel(0x00000002, (weim_base + 0x24)); + writel(0x16002082, (weim_base + 0x28)); + writel(0x00000000, (weim_base + 0x2C)); + writel(0x00000000, (weim_base + 0x90)); + + /* specify 64 MB on CS1 and CS0 on GPR1 */ + reg = readl(iomuxc_base + 0x4); + reg &= ~0x3F; + reg |= 0x1B; + writel(reg, (iomuxc_base + 0x4)); + + iounmap(iomuxc_base); + iounmap(weim_base); + + return 0; +} + +static struct platform_device *devices[] __initdata = { + &ard_smsc_lan9220_device, +}; + +static void __init mx53_ard_board_init(void) +{ + imx53_soc_init(); + imx53_add_imx_uart(0, NULL); + + mx53_ard_io_init(); + weim_cs_config(); + platform_add_devices(devices, ARRAY_SIZE(devices)); + + imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data); + imx53_add_imx2_wdt(0, NULL); + imx53_add_imx_i2c(1, &mx53_ard_i2c2_data); + imx53_add_imx_i2c(2, &mx53_ard_i2c3_data); + imx_add_gpio_keys(&ard_button_data); +} + +static void __init mx53_ard_timer_init(void) +{ + mx53_clocks_init(32768, 24000000, 22579200, 0); +} + +static struct sys_timer mx53_ard_timer = { + .init = mx53_ard_timer_init, +}; + +MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board") + .map_io = mx53_map_io, + .init_early = imx53_init_early, + .init_irq = mx53_init_irq, + .timer = &mx53_ard_timer, + .init_machine = mx53_ard_board_init, +MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index 0d9218a6e2d2..1b417b06b736 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -35,6 +35,7 @@ #define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6) #define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30) #define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19) +#define MX53EVK_LED IMX_GPIO_NR(7, 7) #include "crm_regs.h" #include "devices-imx53.h" @@ -58,12 +59,27 @@ static iomux_v3_cfg_t mx53_evk_pads[] = { /* ecspi chip select lines */ MX53_PAD_EIM_EB2__GPIO2_30, MX53_PAD_EIM_D19__GPIO3_19, + /* LED */ + MX53_PAD_PATA_DA_1__GPIO7_7, }; static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; +static const struct gpio_led mx53evk_leds[] __initconst = { + { + .name = "green", + .default_trigger = "heartbeat", + .gpio = MX53EVK_LED, + }, +}; + +static const struct gpio_led_platform_data mx53evk_leds_data __initconst = { + .leds = mx53evk_leds, + .num_leds = ARRAY_SIZE(mx53evk_leds), +}; + static inline void mx53_evk_init_uart(void) { imx53_add_imx_uart(0, NULL); @@ -135,6 +151,7 @@ static void __init mx53_evk_board_init(void) ARRAY_SIZE(mx53_evk_spi_board_info)); imx53_add_ecspi(0, &mx53_evk_spi_data); imx53_add_imx2_wdt(0, NULL); + gpio_led_register_device(-1, &mx53evk_leds_data); } static void __init mx53_evk_timer_init(void) diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 359c3e248add..54be525e2bd7 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -38,6 +38,10 @@ #define MX53_LOCO_UI1 IMX_GPIO_NR(2, 14) #define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15) #define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6) +#define LOCO_LED IMX_GPIO_NR(7, 7) +#define LOCO_SD3_CD IMX_GPIO_NR(3, 11) +#define LOCO_SD3_WP IMX_GPIO_NR(3, 12) +#define LOCO_SD1_CD IMX_GPIO_NR(3, 13) static iomux_v3_cfg_t mx53_loco_pads[] = { /* FEC */ @@ -70,6 +74,8 @@ static iomux_v3_cfg_t mx53_loco_pads[] = { MX53_PAD_SD1_DATA1__ESDHC1_DAT1, MX53_PAD_SD1_DATA2__ESDHC1_DAT2, MX53_PAD_SD1_DATA3__ESDHC1_DAT3, + /* SD1_CD */ + MX53_PAD_EIM_DA13__GPIO3_13, /* SD3 */ MX53_PAD_PATA_DATA8__ESDHC3_DAT0, MX53_PAD_PATA_DATA9__ESDHC3_DAT1, @@ -163,7 +169,7 @@ static iomux_v3_cfg_t mx53_loco_pads[] = { MX53_PAD_GPIO_7__SPDIF_PLOCK, MX53_PAD_GPIO_17__SPDIF_OUT1, /* GPIO */ - MX53_PAD_PATA_DA_1__GPIO7_7, + MX53_PAD_PATA_DA_1__GPIO7_7, /* LED */ MX53_PAD_PATA_DA_2__GPIO7_8, MX53_PAD_PATA_DATA5__GPIO2_5, MX53_PAD_PATA_DATA6__GPIO2_6, @@ -202,6 +208,15 @@ static const struct gpio_keys_platform_data loco_button_data __initconst = { .nbuttons = ARRAY_SIZE(loco_buttons), }; +static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = { + .cd_gpio = LOCO_SD1_CD, +}; + +static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = { + .cd_gpio = LOCO_SD3_CD, + .wp_gpio = LOCO_SD3_WP, +}; + static inline void mx53_loco_fec_reset(void) { int ret; @@ -225,6 +240,19 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = { .bitrate = 100000, }; +static const struct gpio_led mx53loco_leds[] __initconst = { + { + .name = "green", + .default_trigger = "heartbeat", + .gpio = LOCO_LED, + }, +}; + +static const struct gpio_led_platform_data mx53loco_leds_data __initconst = { + .leds = mx53loco_leds, + .num_leds = ARRAY_SIZE(mx53loco_leds), +}; + static void __init mx53_loco_board_init(void) { imx53_soc_init(); @@ -237,9 +265,10 @@ static void __init mx53_loco_board_init(void) imx53_add_imx2_wdt(0, NULL); imx53_add_imx_i2c(0, &mx53_loco_i2c_data); imx53_add_imx_i2c(1, &mx53_loco_i2c_data); - imx53_add_sdhci_esdhc_imx(0, NULL); - imx53_add_sdhci_esdhc_imx(2, NULL); + imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data); + imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data); imx_add_gpio_keys(&loco_button_data); + gpio_led_register_device(-1, &mx53loco_leds_data); } static void __init mx53_loco_timer_init(void) diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 0adeea17d123..23cd809fa8b8 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -1254,12 +1254,20 @@ DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, &ipg_clk, &aips_tz1_clk); DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET, NULL, NULL, &ipg_clk, &spba_clk); +DEFINE_CLOCK(uart4_ipg_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG4_OFFSET, + NULL, NULL, &ipg_clk, &spba_clk); +DEFINE_CLOCK(uart5_ipg_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG6_OFFSET, + NULL, NULL, &ipg_clk, &spba_clk); DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &uart_root_clk, &uart1_ipg_clk); DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET, NULL, NULL, &uart_root_clk, &uart2_ipg_clk); DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET, NULL, NULL, &uart_root_clk, &uart3_ipg_clk); +DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG5_OFFSET, + NULL, NULL, &uart_root_clk, &uart4_ipg_clk); +DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG7_OFFSET, + NULL, NULL, &uart_root_clk, &uart5_ipg_clk); /* GPT */ DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET, @@ -1279,6 +1287,8 @@ DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET, NULL, NULL, &ipg_perclk, NULL); DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET, NULL, NULL, &ipg_clk, NULL); +DEFINE_CLOCK(i2c3_mx53_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET, + NULL, NULL, &ipg_perclk, NULL); /* FEC */ DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET, @@ -1463,11 +1473,14 @@ static struct clk_lookup mx53_lookups[] = { _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk) + _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) _REGISTER_CLOCK("fec.0", NULL, fec_clk) _REGISTER_CLOCK(NULL, "iim_clk", iim_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) + _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_mx53_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_mx53_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_mx53_clk) @@ -1479,6 +1492,11 @@ static struct clk_lookup mx53_lookups[] = { _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk) _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk) _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk) + _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) + _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) + _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) + _REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk) + _REGISTER_CLOCK("imx-keypad", NULL, dummy_clk) }; static void clk_tree_init(void) diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h index 87c0c58f27a7..5e11ba7daee2 100644 --- a/arch/arm/mach-mx5/crm_regs.h +++ b/arch/arm/mach-mx5/crm_regs.h @@ -114,6 +114,8 @@ #define MXC_CCM_CCGR4 (MX51_CCM_BASE + 0x78) #define MXC_CCM_CCGR5 (MX51_CCM_BASE + 0x7C) #define MXC_CCM_CCGR6 (MX51_CCM_BASE + 0x80) +#define MXC_CCM_CCGR7 (MX51_CCM_BASE + 0x84) + #define MXC_CCM_CMEOR (MX51_CCM_BASE + 0x84) /* Define the bits in register CCR */ diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h index 48f4c8cc42f5..c27fe8bb4762 100644 --- a/arch/arm/mach-mx5/devices-imx53.h +++ b/arch/arm/mach-mx5/devices-imx53.h @@ -32,3 +32,11 @@ extern const struct imx_spi_imx_data imx53_ecspi_data[]; extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[]; #define imx53_add_imx2_wdt(id, pdata) \ imx_add_imx2_wdt(&imx53_imx2_wdt_data[id]) + +extern const struct imx_imx_ssi_data imx53_imx_ssi_data[]; +#define imx53_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata) + +extern const struct imx_imx_keypad_data imx53_imx_keypad_data; +#define imx53_add_imx_keypad(pdata) \ + imx_add_imx_keypad(&imx53_imx_keypad_data, pdata) diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index 665843d6c2b2..ef8aec9319b6 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -18,6 +18,7 @@ #include <mach/hardware.h> #include <mach/common.h> +#include <mach/devices-common.h> #include <mach/iomux-v3.h> /* @@ -100,6 +101,45 @@ void __init mx53_init_irq(void) tzic_init_irq(tzic_virt); } +static struct sdma_script_start_addrs imx51_sdma_script __initdata = { + .ap_2_ap_addr = 642, + .uart_2_mcu_addr = 817, + .mcu_2_app_addr = 747, + .mcu_2_shp_addr = 961, + .ata_2_mcu_addr = 1473, + .mcu_2_ata_addr = 1392, + .app_2_per_addr = 1033, + .app_2_mcu_addr = 683, + .shp_2_per_addr = 1251, + .shp_2_mcu_addr = 892, +}; + +static struct sdma_platform_data imx51_sdma_pdata __initdata = { + .sdma_version = 2, + .fw_name = "sdma-imx51.bin", + .script_addrs = &imx51_sdma_script, +}; + +static struct sdma_script_start_addrs imx53_sdma_script __initdata = { + .ap_2_ap_addr = 642, + .app_2_mcu_addr = 683, + .mcu_2_app_addr = 747, + .uart_2_mcu_addr = 817, + .shp_2_mcu_addr = 891, + .mcu_2_shp_addr = 960, + .uartsh_2_mcu_addr = 1032, + .spdif_2_mcu_addr = 1100, + .mcu_2_spdif_addr = 1134, + .firi_2_mcu_addr = 1193, + .mcu_2_firi_addr = 1290, +}; + +static struct sdma_platform_data imx53_sdma_pdata __initdata = { + .sdma_version = 2, + .fw_name = "sdma-imx53.bin", + .script_addrs = &imx53_sdma_script, +}; + void __init imx51_soc_init(void) { /* i.mx51 has the i.mx31 type gpio */ @@ -107,6 +147,8 @@ void __init imx51_soc_init(void) mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH); mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH); mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH); + + imx_add_imx_sdma(MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata); } void __init imx53_soc_init(void) @@ -119,4 +161,6 @@ void __init imx53_soc_init(void) mxc_register_gpio("imx31-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH); mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); + + imx_add_imx_sdma(MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata); } diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c new file mode 100644 index 000000000000..e4529af0da72 --- /dev/null +++ b/arch/arm/mach-mx5/pm-imx5.c @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/suspend.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/err.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> +#include <mach/system.h> +#include "crm_regs.h" + +static struct clk *gpc_dvfs_clk; + +static int mx5_suspend_enter(suspend_state_t state) +{ + clk_enable(gpc_dvfs_clk); + switch (state) { + case PM_SUSPEND_MEM: + mx5_cpu_lp_set(STOP_POWER_OFF); + break; + case PM_SUSPEND_STANDBY: + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + break; + default: + return -EINVAL; + } + + if (state == PM_SUSPEND_MEM) { + local_flush_tlb_all(); + flush_cache_all(); + + /*clear the EMPGC0/1 bits */ + __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR); + __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR); + } + cpu_do_idle(); + clk_disable(gpc_dvfs_clk); + + return 0; +} + +static int mx5_pm_valid(suspend_state_t state) +{ + return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX); +} + +static const struct platform_suspend_ops mx5_suspend_ops = { + .valid = mx5_pm_valid, + .enter = mx5_suspend_enter, +}; + +static int __init mx5_pm_init(void) +{ + if (gpc_dvfs_clk == NULL) + gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); + + if (!IS_ERR(gpc_dvfs_clk)) { + if (cpu_is_mx51()) + suspend_set_ops(&mx5_suspend_ops); + } else + return -EPERM; + + return 0; +} +device_initcall(mx5_pm_init); diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 162b0b0bc356..4cd0231ee539 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -41,6 +41,7 @@ config MACH_MX23EVK config MACH_MX28EVK bool "Support MX28EVK Platform" select SOC_IMX28 + select LEDS_GPIO_REGISTER select MXS_HAVE_AMBA_DUART select MXS_HAVE_PLATFORM_AUART select MXS_HAVE_PLATFORM_FEC @@ -60,6 +61,7 @@ config MODULE_TX28 select MXS_HAVE_PLATFORM_AUART select MXS_HAVE_PLATFORM_FEC select MXS_HAVE_PLATFORM_MXS_I2C + select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXS_PWM config MACH_TX28 diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index 56767a5cce0e..eaaf6ff28990 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -15,6 +15,7 @@ #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/leds.h> #include <linux/irq.h> #include <linux/clk.h> @@ -29,6 +30,7 @@ #define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13) #define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15) +#define MX28EVK_GPIO_LED MXS_GPIO_NR(3, 5) #define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18) #define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30) #define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13) @@ -178,6 +180,23 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = { /* slot power enable */ MX28_PAD_PWM4__GPIO_3_29 | (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + + /* led */ + MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL, +}; + +/* led */ +static const struct gpio_led mx28evk_leds[] __initconst = { + { + .name = "GPIO-LED", + .default_trigger = "heartbeat", + .gpio = MX28EVK_GPIO_LED, + }, +}; + +static const struct gpio_led_platform_data mx28evk_led_data __initconst = { + .leds = mx28evk_leds, + .num_leds = ARRAY_SIZE(mx28evk_leds), }; /* fec */ @@ -385,6 +404,8 @@ static void __init mx28evk_init(void) if (ret) pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret); mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); + + gpio_led_register_device(0, &mx28evk_led_data); } static void __init mx28evk_timer_init(void) diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c index 6766a12cca7f..515a423f82cd 100644 --- a/arch/arm/mach-mxs/mach-tx28.c +++ b/arch/arm/mach-mxs/mach-tx28.c @@ -139,6 +139,11 @@ static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = { }, }; +static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = { + .wp_gpio = -EINVAL, + .flags = SLOTF_4_BIT_CAPABLE, +}; + static void __init tx28_stk5v3_init(void) { mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads, @@ -155,6 +160,7 @@ static void __init tx28_stk5v3_init(void) mx28_add_mxs_i2c(0); i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo, ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo)); + mx28_add_mxs_mmc(0, &tx28_mmc0_pdata); } static void __init tx28_timer_init(void) diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 810a982a66f8..ef3e8b1e06c1 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -825,6 +825,7 @@ MACHINE_START(BALLOON3, "Balloon3") .map_io = balloon3_map_io, .nr_irqs = BALLOON3_NR_IRQS, .init_irq = balloon3_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = balloon3_init, .boot_params = PLAT_PHYS_OFFSET + 0x100, diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c index 4284513f396a..648b0ab2bf77 100644 --- a/arch/arm/mach-pxa/capc7117.c +++ b/arch/arm/mach-pxa/capc7117.c @@ -151,6 +151,7 @@ MACHINE_START(CAPC7117, .boot_params = 0xa0000100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = capc7117_init MACHINE_END diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c index d5152220ce94..4d466102a027 100644 --- a/arch/arm/mach-pxa/clock.c +++ b/arch/arm/mach-pxa/clock.c @@ -53,6 +53,21 @@ unsigned long clk_get_rate(struct clk *clk) } EXPORT_SYMBOL(clk_get_rate); +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + int ret = -EINVAL; + + if (clk->ops->setrate) { + spin_lock_irqsave(&clocks_lock, flags); + ret = clk->ops->setrate(clk, rate); + spin_unlock_irqrestore(&clocks_lock, flags); + } + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + void clk_dummy_enable(struct clk *clk) { } diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h index 1f2fb9c43f06..3a258b1bf1aa 100644 --- a/arch/arm/mach-pxa/clock.h +++ b/arch/arm/mach-pxa/clock.h @@ -5,6 +5,7 @@ struct clkops { void (*enable)(struct clk *); void (*disable)(struct clk *); unsigned long (*getrate)(struct clk *); + int (*setrate)(struct clk *, unsigned long); }; struct clk { diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index bc55d07566ca..13cf518bbbf8 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -21,7 +21,8 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <mach/pxa2xx-regs.h> +#include <mach/pxa25x.h> +#include <mach/pxa27x.h> #include <mach/audio.h> #include <mach/pxafb.h> #include <mach/smemc.h> @@ -516,6 +517,8 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX") .map_io = cmx2xx_map_io, .nr_irqs = CMX2XX_NR_IRQS, .init_irq = cmx2xx_init_irq, + /* NOTE: pxa25x_handle_irq() works on PXA27x w/o camera support */ + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = cmx2xx_init, #ifdef CONFIG_PCI diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index b199596f9c3d..b6a51340270b 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -855,6 +855,7 @@ MACHINE_START(CM_X300, "CM-X300 module") .boot_params = 0xa0000100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = cm_x300_init, .fixup = cm_x300_fixup, diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 7545a48ed88b..870920934ecf 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -310,6 +310,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270") .init_machine = colibri_pxa270_init, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, MACHINE_END @@ -318,6 +319,7 @@ MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC") .init_machine = colibri_pxa270_income_init, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 66dd81cbc8a0..60a6781e7a8e 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -187,6 +187,7 @@ MACHINE_START(COLIBRI300, "Toradex Colibri PXA300") .init_machine = colibri_pxa300_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index ff9ff5f4fc47..d2c6631915d4 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -23,8 +23,7 @@ #include <asm/mach/arch.h> #include <asm/mach/irq.h> -#include <mach/pxa3xx-regs.h> -#include <mach/mfp-pxa320.h> +#include <mach/pxa320.h> #include <mach/colibri.h> #include <mach/pxafb.h> #include <mach/ohci.h> @@ -258,6 +257,7 @@ MACHINE_START(COLIBRI320, "Toradex Colibri PXA320") .init_machine = colibri_pxa320_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 3a5507e31919..185a37cad254 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -722,6 +722,7 @@ MACHINE_START(CORGI, "SHARP Corgi") .fixup = fixup_corgi, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END @@ -732,6 +733,7 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd") .fixup = fixup_corgi, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END @@ -742,6 +744,7 @@ MACHINE_START(HUSKY, "SHARP Husky") .fixup = fixup_corgi, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 0481c29a70e8..fe812eafb1f1 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -22,10 +22,9 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/csb726.h> -#include <mach/mfp-pxa27x.h> +#include <mach/pxa27x.h> #include <mach/mmc.h> #include <mach/ohci.h> -#include <mach/pxa2xx-regs.h> #include <mach/audio.h> #include <mach/smemc.h> @@ -276,6 +275,7 @@ MACHINE_START(CSB726, "Cogent CSB726") .boot_params = 0xa0000100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .init_machine = csb726_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index f8a6e9d79a3a..2e37ea52b372 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -1302,6 +1302,7 @@ MACHINE_START(EM_X270, "Compulab EM-X270") .boot_params = 0xa0000100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = em_x270_init, MACHINE_END @@ -1310,6 +1311,7 @@ MACHINE_START(EXEDA, "Compulab eXeda") .boot_params = 0xa0000100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = em_x270_init, MACHINE_END diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 2e3970fdde0b..b4599ec9d619 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -193,6 +193,7 @@ MACHINE_START(E330, "Toshiba e330") .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e330_init, .timer = &pxa_timer, @@ -242,6 +243,7 @@ MACHINE_START(E350, "Toshiba e350") .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e350_init, .timer = &pxa_timer, @@ -364,6 +366,7 @@ MACHINE_START(E400, "Toshiba e400") .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e400_init, .timer = &pxa_timer, @@ -552,6 +555,7 @@ MACHINE_START(E740, "Toshiba e740") .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e740_init, .timer = &pxa_timer, @@ -743,6 +747,7 @@ MACHINE_START(E750, "Toshiba e750") .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e750_init, .timer = &pxa_timer, @@ -947,6 +952,7 @@ MACHINE_START(E800, "Toshiba e800") .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e800_init, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index d88aed8fbe15..b73eadb9f5dc 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -801,6 +801,7 @@ MACHINE_START(EZX_A780, "Motorola EZX A780") .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = a780_init, MACHINE_END @@ -866,6 +867,7 @@ MACHINE_START(EZX_E680, "Motorola EZX E680") .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = e680_init, MACHINE_END @@ -931,6 +933,7 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200") .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = a1200_init, MACHINE_END @@ -1121,6 +1124,7 @@ MACHINE_START(EZX_A910, "Motorola EZX A910") .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = a910_init, MACHINE_END @@ -1186,6 +1190,7 @@ MACHINE_START(EZX_E6, "Motorola EZX E6") .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = e6_init, MACHINE_END @@ -1225,6 +1230,7 @@ MACHINE_START(EZX_E2, "Motorola EZX E2") .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = e2_init, MACHINE_END diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index e6c9344a95ae..92a2e85ab02c 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -13,21 +13,8 @@ struct irq_data; struct sys_timer; extern struct sys_timer pxa_timer; -extern void __init pxa_init_irq(int irq_nr, - int (*set_wake)(struct irq_data *, - unsigned int)); -extern void __init pxa25x_init_irq(void); -#ifdef CONFIG_CPU_PXA26x -extern void __init pxa26x_init_irq(void); -#endif -extern void __init pxa27x_init_irq(void); -extern void __init pxa3xx_init_irq(void); -extern void __init pxa95x_init_irq(void); extern void __init pxa_map_io(void); -extern void __init pxa25x_map_io(void); -extern void __init pxa27x_map_io(void); -extern void __init pxa3xx_map_io(void); extern unsigned int get_clk_frequency_khz(int info); diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index d65e4bde9b91..deaa111c91f9 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -236,6 +236,7 @@ MACHINE_START(GUMSTIX, "Gumstix") .boot_params = 0xa0000100, /* match u-boot bi_boot_params */ .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = gumstix_init, MACHINE_END diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index 657db469de1f..0a235128914d 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -28,6 +28,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/irq.h> #include <mach/pxa25x.h> #include <mach/h5000.h> @@ -205,6 +206,7 @@ MACHINE_START(H5400, "HP iPAQ H5000") .boot_params = 0xa0000100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = h5000_init, MACHINE_END diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c index e8603eba54bd..a997d0ab2872 100644 --- a/arch/arm/mach-pxa/himalaya.c +++ b/arch/arm/mach-pxa/himalaya.c @@ -24,8 +24,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/mfp-pxa25x.h> -#include <mach/hardware.h> +#include <mach/pxa25x.h> #include "generic.h" @@ -162,6 +161,7 @@ MACHINE_START(HIMALAYA, "HTC Himalaya") .boot_params = 0xa0000100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .init_machine = himalaya_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 99960a1814e0..c748a473a2ff 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -842,6 +842,7 @@ MACHINE_START(H4700, "HP iPAQ HX4700") .map_io = pxa27x_map_io, .nr_irqs = HX4700_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .init_machine = hx4700_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index 6cedc81da3bc..d427429f1f34 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -194,6 +194,7 @@ MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM") .boot_params = 0xa0000100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = icontrol_init MACHINE_END diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index f7fb64f11a7d..ddf20e5c376e 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -196,6 +196,7 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP") /* Maintainer: Vibren Technologies */ .map_io = idp_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = idp_init, MACHINE_END diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index 038402404e39..7cc5a781e99e 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -104,4 +104,16 @@ #define NR_IRQS (IRQ_BOARD_START) +#ifndef __ASSEMBLY__ +struct irq_data; +struct pt_regs; + +void pxa_mask_irq(struct irq_data *); +void pxa_unmask_irq(struct irq_data *); +void icip_handle_irq(struct pt_regs *); +void ichp_handle_irq(struct pt_regs *); + +void pxa_init_irq(int irq_nr, int (*set_wake)(struct irq_data *, unsigned int)); +#endif + #endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa25x.h b/arch/arm/mach-pxa/include/mach/pxa25x.h index 508c3ba1f4d0..3ac0baac7350 100644 --- a/arch/arm/mach-pxa/include/mach/pxa25x.h +++ b/arch/arm/mach-pxa/include/mach/pxa25x.h @@ -4,5 +4,14 @@ #include <mach/hardware.h> #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa25x.h> +#include <mach/irqs.h> + +extern void __init pxa25x_map_io(void); +extern void __init pxa25x_init_irq(void); +#ifdef CONFIG_CPU_PXA26x +extern void __init pxa26x_init_irq(void); +#endif + +#define pxa25x_handle_irq icip_handle_irq #endif /* __MACH_PXA25x_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h index 0b702693f458..b9b1bdc4bacc 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/pxa27x.h @@ -4,6 +4,7 @@ #include <mach/hardware.h> #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa27x.h> +#include <mach/irqs.h> #define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ @@ -17,6 +18,10 @@ #define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ #define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ +extern void __init pxa27x_map_io(void); +extern void __init pxa27x_init_irq(void); extern int __init pxa27x_set_pwrmode(unsigned int mode); +#define pxa27x_handle_irq ichp_handle_irq + #endif /* __MACH_PXA27x_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa300.h b/arch/arm/mach-pxa/include/mach/pxa300.h index 2f33076c9e48..733b6412c3df 100644 --- a/arch/arm/mach-pxa/include/mach/pxa300.h +++ b/arch/arm/mach-pxa/include/mach/pxa300.h @@ -1,8 +1,7 @@ #ifndef __MACH_PXA300_H #define __MACH_PXA300_H -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> +#include <mach/pxa3xx.h> #include <mach/mfp-pxa300.h> #endif /* __MACH_PXA300_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa320.h b/arch/arm/mach-pxa/include/mach/pxa320.h index cab78e903273..b6204e470d89 100644 --- a/arch/arm/mach-pxa/include/mach/pxa320.h +++ b/arch/arm/mach-pxa/include/mach/pxa320.h @@ -1,8 +1,7 @@ #ifndef __MACH_PXA320_H #define __MACH_PXA320_H -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> +#include <mach/pxa3xx.h> #include <mach/mfp-pxa320.h> #endif /* __MACH_PXA320_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx.h b/arch/arm/mach-pxa/include/mach/pxa3xx.h new file mode 100644 index 000000000000..cd3e57f42688 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa3xx.h @@ -0,0 +1,14 @@ +#ifndef __MACH_PXA3XX_H +#define __MACH_PXA3XX_H + +#include <mach/hardware.h> +#include <mach/pxa3xx-regs.h> +#include <mach/irqs.h> + +extern void __init pxa3xx_map_io(void); +extern void __init pxa3xx_init_irq(void); +extern void __init pxa95x_init_irq(void); + +#define pxa3xx_handle_irq ichp_handle_irq + +#endif /* __MACH_PXA3XX_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa930.h b/arch/arm/mach-pxa/include/mach/pxa930.h index d45f76a9b54d..190363b98d01 100644 --- a/arch/arm/mach-pxa/include/mach/pxa930.h +++ b/arch/arm/mach-pxa/include/mach/pxa930.h @@ -1,8 +1,7 @@ #ifndef __MACH_PXA930_H #define __MACH_PXA930_H -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> +#include <mach/pxa3xx.h> #include <mach/mfp-pxa930.h> #endif /* __MACH_PXA930_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h deleted file mode 100644 index 662288eb6f95..000000000000 --- a/arch/arm/mach-pxa/include/mach/regs-intc.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef __ASM_MACH_REGS_INTC_H -#define __ASM_MACH_REGS_INTC_H - -#include <mach/hardware.h> - -/* - * Interrupt Controller - */ - -#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ -#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ -#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ -#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ -#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ -#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ -#define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */ - -#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ -#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ -#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ -#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ -#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ - -#define ICIP3 __REG(0x40D00130) /* Interrupt Controller IRQ Pending Register 3 */ -#define ICMR3 __REG(0x40D00134) /* Interrupt Controller Mask Register 3 */ -#define ICLR3 __REG(0x40D00138) /* Interrupt Controller Level Register 3 */ -#define ICFP3 __REG(0x40D0013C) /* Interrupt Controller FIQ Pending Register 3 */ -#define ICPR3 __REG(0x40D00140) /* Interrupt Controller Pending Register 3 */ - -#endif /* __ASM_MACH_REGS_INTC_H */ diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 32ed551bf9c5..b09e848eb6c6 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -37,6 +37,8 @@ #define IPR(i) (((i) < 32) ? (0x01c + ((i) << 2)) : \ ((i) < 64) ? (0x0b0 + (((i) - 32) << 2)) : \ (0x144 + (((i) - 64) << 2))) +#define ICHP_VAL_IRQ (1 << 31) +#define ICHP_IRQ(i) (((i) >> 16) & 0x7fff) #define IPR_VALID (1 << 31) #define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f) @@ -64,7 +66,7 @@ static inline void __iomem *irq_base(int i) return (void __iomem *)io_p2v(phys_base[i]); } -static void pxa_mask_irq(struct irq_data *d) +void pxa_mask_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); uint32_t icmr = __raw_readl(base + ICMR); @@ -73,7 +75,7 @@ static void pxa_mask_irq(struct irq_data *d) __raw_writel(icmr, base + ICMR); } -static void pxa_unmask_irq(struct irq_data *d) +void pxa_unmask_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); uint32_t icmr = __raw_readl(base + ICMR); @@ -127,6 +129,36 @@ static struct irq_chip pxa_low_gpio_chip = { .irq_set_type = pxa_set_low_gpio_type, }; +asmlinkage void __exception_irq_entry icip_handle_irq(struct pt_regs *regs) +{ + uint32_t icip, icmr, mask; + + do { + icip = __raw_readl(IRQ_BASE + ICIP); + icmr = __raw_readl(IRQ_BASE + ICMR); + mask = icip & icmr; + + if (mask == 0) + break; + + handle_IRQ(PXA_IRQ(fls(mask) - 1), regs); + } while (1); +} + +asmlinkage void __exception_irq_entry ichp_handle_irq(struct pt_regs *regs) +{ + uint32_t ichp; + + do { + __asm__ __volatile__("mrc p6, 0, %0, c5, c0, 0\n": "=r"(ichp)); + + if ((ichp & ICHP_VAL_IRQ) == 0) + break; + + handle_IRQ(PXA_IRQ(ICHP_IRQ(ichp)), regs); + } while (1); +} + static void __init pxa_init_low_gpio_irq(set_wake_t fn) { int irq; diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index e5e326d2cdc9..8f97e15e86e5 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -441,6 +441,7 @@ MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleto .map_io = pxa3xx_map_io, .nr_irqs = LITTLETON_NR_IRQS, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = littleton_init, MACHINE_END diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 6cf8180bf5bd..c171d6ebee49 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -503,6 +503,7 @@ MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine") .map_io = lpd270_map_io, .nr_irqs = LPD270_NR_IRQS, .init_irq = lpd270_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = lpd270_init, MACHINE_END diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index e10ddb827147..a8c696bfc132 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -553,6 +553,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)") .map_io = lubbock_map_io, .nr_irqs = LUBBOCK_NR_IRQS, .init_irq = lubbock_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = lubbock_init, MACHINE_END diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 0e42798942f7..5fe5bcd7c0a1 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -757,6 +757,7 @@ MACHINE_START(MAGICIAN, "HTC Magician") .map_io = pxa27x_map_io, .nr_irqs = MAGICIAN_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .init_machine = magician_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 3479e2b3b511..4622eb78ef25 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -620,6 +620,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") .map_io = mainstone_map_io, .nr_irqs = MAINSTONE_NR_IRQS, .init_irq = mainstone_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = mainstone_init, MACHINE_END diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index aa67637ae41d..64810f908e5b 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -754,6 +754,7 @@ MACHINE_START(MIOA701, "MIO A701") .boot_params = 0xa0000100, .map_io = &pxa27x_map_io, .init_irq = &pxa27x_init_irq, + .handle_irq = &pxa27x_handle_irq, .init_machine = mioa701_machine_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c index 59cce78aebd1..fb408861dbcf 100644 --- a/arch/arm/mach-pxa/mp900.c +++ b/arch/arm/mach-pxa/mp900.c @@ -96,6 +96,7 @@ MACHINE_START(NEC_MP900, "MobilePro900/C") .timer = &pxa_timer, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .init_machine = mp900c_init, MACHINE_END diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 4061ecddee70..6b77365ed938 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -345,6 +345,7 @@ MACHINE_START(PALMLD, "Palm LifeDrive") .boot_params = 0xa0000100, .map_io = palmld_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = palmld_init MACHINE_END diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index df4d7d009fbb..9bd3e47486fb 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -206,6 +206,7 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5") .map_io = pxa27x_map_io, .reserve = palmt5_reserve, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = palmt5_init MACHINE_END diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index fb06bd047272..6ad4a6c7bc96 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -31,14 +31,13 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <mach/pxa25x.h> #include <mach/audio.h> #include <mach/palmtc.h> #include <mach/mmc.h> #include <mach/pxafb.h> -#include <mach/mfp-pxa25x.h> #include <mach/irda.h> #include <mach/udc.h> -#include <mach/pxa2xx-regs.h> #include "generic.h" #include "devices.h" @@ -541,6 +540,7 @@ MACHINE_START(PALMTC, "Palm Tungsten|C") .boot_params = 0xa0000100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = palmtc_init MACHINE_END diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 726f5b98dcd3..664232f3e62c 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -31,11 +31,11 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <mach/pxa25x.h> #include <mach/audio.h> #include <mach/palmte2.h> #include <mach/mmc.h> #include <mach/pxafb.h> -#include <mach/mfp-pxa25x.h> #include <mach/irda.h> #include <mach/udc.h> #include <mach/palmasoc.h> @@ -359,6 +359,7 @@ MACHINE_START(PALMTE2, "Palm Tungsten|E2") .boot_params = 0xa0000100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = palmte2_init MACHINE_END diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 20d1b18b1733..bb27d4b688d8 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -444,6 +444,7 @@ MACHINE_START(TREO680, "Palm Treo 680") .map_io = pxa27x_map_io, .reserve = treo_reserve, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = treo680_init, MACHINE_END @@ -453,6 +454,7 @@ MACHINE_START(CENTRO, "Palm Centro 685") .map_io = pxa27x_map_io, .reserve = treo_reserve, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = centro_init, MACHINE_END diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 595f002066cc..fc4285589c1f 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -367,6 +367,7 @@ MACHINE_START(PALMTX, "Palm T|X") .boot_params = 0xa0000100, .map_io = palmtx_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = palmtx_init MACHINE_END diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 5a5329bc33f1..e61c1cc05519 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -402,6 +402,7 @@ MACHINE_START(PALMZ72, "Palm Zire72") .boot_params = 0xa0000100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = palmz72_init MACHINE_END diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index 1fc8a66407ae..ffa65dfb8c6f 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -262,6 +262,7 @@ MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270") .map_io = pcm027_map_io, .nr_irqs = PCM027_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = pcm027_init, MACHINE_END diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 16d14fd79b4b..a113ea9ab4ab 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -468,6 +468,7 @@ MACHINE_START(POODLE, "SHARP Poodle") .map_io = pxa25x_map_io, .nr_irqs = POODLE_NR_IRQS, /* 4 for LoCoMo */ .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = poodle_init, MACHINE_END diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index ef1c56a67afc..b5cd9e5aba31 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -32,7 +32,6 @@ #include <mach/ohci.h> #include <mach/pm.h> #include <mach/dma.h> -#include <mach/regs-intc.h> #include <mach/smemc.h> #include "generic.h" @@ -338,13 +337,13 @@ static void pxa_ack_ext_wakeup(struct irq_data *d) static void pxa_mask_ext_wakeup(struct irq_data *d) { - ICMR2 &= ~(1 << ((d->irq - PXA_IRQ(0)) & 0x1f)); + pxa_mask_irq(d); PECR &= ~PECR_IE(d->irq - IRQ_WAKEUP0); } static void pxa_unmask_ext_wakeup(struct irq_data *d) { - ICMR2 |= 1 << ((d->irq - PXA_IRQ(0)) & 0x1f); + pxa_unmask_irq(d); PECR |= PECR_IE(d->irq - IRQ_WAKEUP0); } diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index ecc82a330fad..0ee166b61f81 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -27,7 +27,6 @@ #include <mach/reset.h> #include <mach/pm.h> #include <mach/dma.h> -#include <mach/regs-intc.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 2f37d43f51b6..bbcd90562ebe 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -46,10 +46,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> -#include <mach/mfp-pxa3xx.h> -#include <mach/mfp-pxa300.h> +#include <mach/pxa300.h> #include <mach/ohci.h> #include <mach/pxafb.h> #include <mach/mmc.h> @@ -1093,6 +1090,7 @@ MACHINE_START(RAUMFELD_RC, "Raumfeld Controller") .init_machine = raumfeld_controller_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, MACHINE_END #endif @@ -1103,6 +1101,7 @@ MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector") .init_machine = raumfeld_connector_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, MACHINE_END #endif @@ -1113,6 +1112,7 @@ MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker") .init_machine = raumfeld_speaker_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index fee97a935122..df4356e8acae 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -599,6 +599,7 @@ MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)") .boot_params = 0xa0000100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = saar_init, MACHINE_END diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index e53a3334c944..ebd6379c4969 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -107,6 +107,7 @@ MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)") .map_io = pxa3xx_map_io, .nr_irqs = SAARB_NR_IRQS, .init_irq = pxa95x_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = saarb_init, MACHINE_END diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 01c576963e94..438c7b5e451f 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -984,6 +984,7 @@ MACHINE_START(SPITZ, "SHARP Spitz") .fixup = spitz_fixup, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, .timer = &pxa_timer, MACHINE_END @@ -994,6 +995,7 @@ MACHINE_START(BORZOI, "SHARP Borzoi") .fixup = spitz_fixup, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, .timer = &pxa_timer, MACHINE_END @@ -1004,6 +1006,7 @@ MACHINE_START(AKITA, "SHARP Akita") .fixup = spitz_fixup, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index cb5611daf5fe..3f8d0af9e2f7 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -1001,6 +1001,7 @@ static void __init stargate2_init(void) MACHINE_START(INTELMOTE2, "IMOTE 2") .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = imote2_init, .boot_params = 0xA0000100, @@ -1012,6 +1013,7 @@ MACHINE_START(STARGATE2, "Stargate 2") .map_io = pxa27x_map_io, .nr_irqs = STARGATE_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = stargate2_init, .boot_params = 0xA0000100, diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 53d4a472b699..32fb58e01b10 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -492,6 +492,7 @@ MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)") .boot_params = 0xa0000100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = tavorevb_init, MACHINE_END diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c index 79f4422f12f4..fd5a8eae0a87 100644 --- a/arch/arm/mach-pxa/tavorevb3.c +++ b/arch/arm/mach-pxa/tavorevb3.c @@ -129,6 +129,7 @@ MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)") .map_io = pxa3xx_map_io, .nr_irqs = TAVOREVB3_NR_IRQS, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = evb3_init, MACHINE_END diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 5fa145778e7d..9f69a2682693 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -974,6 +974,7 @@ MACHINE_START(TOSA, "SHARP Tosa") .map_io = pxa25x_map_io, .nr_irqs = TOSA_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .init_machine = tosa_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 687417a93698..c0417508f39d 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -558,6 +558,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module") .init_machine = trizeps4_init, .map_io = trizeps4_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, MACHINE_END @@ -567,5 +568,6 @@ MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module") .init_machine = trizeps4_init, .map_io = trizeps4_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 903218eab56d..d4a3dc74e84a 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -995,6 +995,7 @@ MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC") .boot_params = 0xa0000100, .map_io = viper_map_io, .init_irq = viper_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = viper_init, MACHINE_END diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 67bd41488bf8..5f8490ab07cb 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -719,6 +719,7 @@ MACHINE_START(VPAC270, "Voipac PXA270") .boot_params = 0xa0000100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = vpac270_init MACHINE_END diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index f55f8f2e0db3..acc600f5e72f 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -28,8 +28,7 @@ #include <asm/mach/map.h> #include <mach/hardware.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> +#include <mach/pxa25x.h> #include <mach/smemc.h> #include "generic.h" @@ -185,6 +184,7 @@ MACHINE_START(XCEP, "Iskratel XCEP") .init_machine = xcep_init, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index fbe9e02e2f9f..6c9275a20c91 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -40,6 +40,7 @@ #include <mach/pxafb.h> #include <mach/mmc.h> #include <plat/pxa27x_keypad.h> +#include <mach/pm.h> #include "generic.h" #include "devices.h" @@ -677,6 +678,20 @@ static void __init z2_pmic_init(void) static inline void z2_pmic_init(void) {} #endif +#ifdef CONFIG_PM +static void z2_power_off(void) +{ + /* We're using deep sleep as poweroff, so clear PSPR to ensure that + * bootloader will jump to its entry point in resume handler + */ + PSPR = 0x0; + local_irq_disable(); + pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); +} +#else +#define z2_power_off NULL +#endif + /****************************************************************************** * Machine init ******************************************************************************/ @@ -698,12 +713,15 @@ static void __init z2_init(void) z2_leds_init(); z2_keys_init(); z2_pmic_init(); + + pm_power_off = z2_power_off; } MACHINE_START(ZIPIT2, "Zipit Z2") .boot_params = 0xa0000100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = z2_init, MACHINE_END diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 9b99cc164de5..99c49bcd9f70 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -35,14 +35,13 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/pxa2xx-regs.h> +#include <mach/pxa27x.h> #include <mach/regs-uart.h> #include <mach/ohci.h> #include <mach/mmc.h> #include <mach/pxa27x-udc.h> #include <mach/udc.h> #include <mach/pxafb.h> -#include <mach/mfp-pxa27x.h> #include <mach/pm.h> #include <mach/audio.h> #include <mach/arcom-pcmcia.h> @@ -909,6 +908,7 @@ MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS") .map_io = zeus_map_io, .nr_irqs = ZEUS_NR_IRQS, .init_irq = zeus_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = zeus_init, MACHINE_END diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 5821185f77ab..15ec66b3471a 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -24,7 +24,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> +#include <mach/pxa3xx.h> #include <mach/audio.h> #include <mach/pxafb.h> #include <mach/zylonite.h> @@ -426,6 +426,7 @@ MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") .map_io = pxa3xx_map_io, .nr_irqs = ZYLONITE_NR_IRQS, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = zylonite_init, MACHINE_END diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h index 70a83b209e25..45eea5210c87 100644 --- a/arch/arm/mach-s3c2410/include/mach/pm-core.h +++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h @@ -62,3 +62,6 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save) { } + +static inline void s3c_pm_restored_gpios(void) { } +static inline void s3c_pm_saved_gpios(void) { } diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h index ddb63a1863ab..c026f67a80de 100644 --- a/arch/arm/mach-s3c64xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h @@ -217,6 +217,7 @@ /* Compatibility */ #define IRQ_ONENAND IRQ_ONENAND0 +#define IRQ_I2S0 IRQ_S3C6410_IIS #endif /* __ASM_MACH_S3C64XX_IRQS_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h index 1e9f20f0bb7b..38659bebe4b1 100644 --- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h +++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h @@ -53,7 +53,7 @@ static inline void s3c_pm_arch_show_resume_irqs(void) * the IRQ wake controls depending on the CPU we are running on */ #define s3c_irqwake_eintallow ((1 << 28) - 1) -#define s3c_irqwake_intallow (0) +#define s3c_irqwake_intallow (~0) static inline void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save) @@ -96,3 +96,20 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, save->ucon = new_ucon; } } + +static inline void s3c_pm_restored_gpios(void) +{ + /* ensure sleep mode has been cleared from the system */ + + __raw_writel(0, S3C64XX_SLPEN); +} + +static inline void s3c_pm_saved_gpios(void) +{ + /* turn on the sleep mode and keep it there, as it seems that during + * suspend the xCON registers get re-set and thus you can end up with + * problems between going to sleep and resuming. + */ + + __raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN); +} diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c index 97660c8141ae..75d9a0e49193 100644 --- a/arch/arm/mach-s3c64xx/irq.c +++ b/arch/arm/mach-s3c64xx/irq.c @@ -48,14 +48,22 @@ static struct s3c_uart_irq uart_irqs[] = { }, }; +/* setup the sources the vic should advertise resume for, even though it + * is not doing the wake (set_irq_wake needs to be valid) */ +#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE)) +#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \ + 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \ + 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \ + 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \ + 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE)) void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) { printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); /* initialise the pair of VICs */ - vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, 0); - vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, 0); + vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME); + vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME); /* add the timer sub-irqs */ s3c_init_vic_timer_irq(5, IRQ_TIMER0); diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile index ae6bf6feba89..5f6afdf067ed 100644 --- a/arch/arm/mach-s5p64x0/Makefile +++ b/arch/arm/mach-s5p64x0/Makefile @@ -13,7 +13,7 @@ obj- := # Core support for S5P64X0 system obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o gpiolib.o -obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o +obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o irq-eint.o obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h index 513abffc7604..5837a36ece8d 100644 --- a/arch/arm/mach-s5p64x0/include/mach/irqs.h +++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h @@ -85,6 +85,8 @@ #define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4 #define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5 +#define IRQ_I2S0 IRQ_I2SV40 + /* S5P6450 EINT feature will be added */ /* diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h index 0953ef6b1c77..6ce254729f3b 100644 --- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h @@ -34,4 +34,14 @@ #define S5P6450_GPQ_BASE (S5P_VA_GPIO + 0x0180) #define S5P6450_GPS_BASE (S5P_VA_GPIO + 0x0300) +/* External interrupt control registers for group0 */ + +#define EINT0CON0_OFFSET (0x900) +#define EINT0MASK_OFFSET (0x920) +#define EINT0PEND_OFFSET (0x924) + +#define S5P64X0_EINT0CON0 (S5P_VA_GPIO + EINT0CON0_OFFSET) +#define S5P64X0_EINT0MASK (S5P_VA_GPIO + EINT0MASK_OFFSET) +#define S5P64X0_EINT0PEND (S5P_VA_GPIO + EINT0PEND_OFFSET) + #endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c new file mode 100644 index 000000000000..69ed4545112b --- /dev/null +++ b/arch/arm/mach-s5p64x0/irq-eint.c @@ -0,0 +1,152 @@ +/* arch/arm/mach-s5p64x0/irq-eint.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd + * http://www.samsung.com/ + * + * Based on linux/arch/arm/mach-s3c64xx/irq-eint.c + * + * S5P64X0 - Interrupt handling for External Interrupts. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <plat/regs-irqtype.h> +#include <plat/gpio-cfg.h> + +#include <mach/regs-gpio.h> +#include <mach/regs-clock.h> + +#define eint_offset(irq) ((irq) - IRQ_EINT(0)) + +static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type) +{ + int offs = eint_offset(data->irq); + int shift; + u32 ctrl, mask; + u32 newvalue = 0; + + if (offs > 15) + return -EINVAL; + + switch (type) { + case IRQ_TYPE_NONE: + printk(KERN_WARNING "No edge setting!\n"); + break; + case IRQ_TYPE_EDGE_RISING: + newvalue = S3C2410_EXTINT_RISEEDGE; + break; + case IRQ_TYPE_EDGE_FALLING: + newvalue = S3C2410_EXTINT_FALLEDGE; + break; + case IRQ_TYPE_EDGE_BOTH: + newvalue = S3C2410_EXTINT_BOTHEDGE; + break; + case IRQ_TYPE_LEVEL_LOW: + newvalue = S3C2410_EXTINT_LOWLEV; + break; + case IRQ_TYPE_LEVEL_HIGH: + newvalue = S3C2410_EXTINT_HILEV; + break; + default: + printk(KERN_ERR "No such irq type %d", type); + return -EINVAL; + } + + shift = (offs / 2) * 4; + mask = 0x7 << shift; + + ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask; + ctrl |= newvalue << shift; + __raw_writel(ctrl, S5P64X0_EINT0CON0); + + /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */ + if (0x50000 == (__raw_readl(S5P64X0_SYS_ID) & 0xFF000)) + s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2)); + else + s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2)); + + return 0; +} + +/* + * s5p64x0_irq_demux_eint + * + * This function demuxes the IRQ from the group0 external interrupts, + * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into + * the specific handlers s5p64x0_irq_demux_eintX_Y. + */ +static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end) +{ + u32 status = __raw_readl(S5P64X0_EINT0PEND); + u32 mask = __raw_readl(S5P64X0_EINT0MASK); + unsigned int irq; + + status &= ~mask; + status >>= start; + status &= (1 << (end - start + 1)) - 1; + + for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) { + if (status & 1) + generic_handle_irq(irq); + status >>= 1; + } +} + +static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc) +{ + s5p64x0_irq_demux_eint(0, 3); +} + +static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc) +{ + s5p64x0_irq_demux_eint(4, 11); +} + +static void s5p64x0_irq_demux_eint12_15(unsigned int irq, + struct irq_desc *desc) +{ + s5p64x0_irq_demux_eint(12, 15); +} + +static int s5p64x0_alloc_gc(void) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + + gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE, + S5P_VA_GPIO, handle_level_irq); + if (!gc) { + printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0" + "external interrupts failed\n", __func__); + return -EINVAL; + } + + ct = gc->chip_types; + ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_mask = irq_gc_mask_set_bit; + ct->chip.irq_unmask = irq_gc_mask_clr_bit; + ct->chip.irq_set_type = s5p64x0_irq_eint_set_type; + ct->regs.ack = EINT0PEND_OFFSET; + ct->regs.mask = EINT0MASK_OFFSET; + irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST | IRQ_NOPROBE, 0); + return 0; +} + +static int __init s5p64x0_init_irq_eint(void) +{ + int ret = s5p64x0_alloc_gc(); + irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3); + irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11); + irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15); + + return ret; +} +arch_initcall(s5p64x0_init_irq_eint); diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 79bb3a0314ef..69dd87cd8e22 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -90,6 +90,7 @@ config MACH_GONI select S3C_DEV_HSMMC2 select S3C_DEV_I2C1 select S3C_DEV_I2C2 + select S5P_DEV_MFC select S3C_DEV_USB_HSOTG select S5P_DEV_ONENAND select SAMSUNG_DEV_KEYPAD diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index ae72f87eab15..52a8e607bcc2 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -324,6 +324,12 @@ static struct clk init_clocks_off[] = { .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 26), }, { + .name = "mfc", + .devname = "s5p-mfc", + .parent = &clk_pclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 16), + }, { .name = "otg", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip1_ctrl, @@ -879,6 +885,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_mfc", + .devname = "s5p-mfc", .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 16), }, diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 61e6c24b90ac..79907ec78d43 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -126,7 +126,7 @@ void __init s5pv210_map_io(void) s5pv210_default_sdhci2(); s5pv210_default_sdhci3(); - s3c_adc_setname("s3c64xx-adc"); + s3c_adc_setname("samsung-adc-v3"); s3c_cfcon_setname("s5pv210-pata"); diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c index 8d58f1926241..63f5d82004b5 100644 --- a/arch/arm/mach-s5pv210/dev-audio.c +++ b/arch/arm/mach-s5pv210/dev-audio.c @@ -18,6 +18,7 @@ #include <mach/map.h> #include <mach/dma.h> #include <mach/irqs.h> +#include <mach/regs-audss.h> static const char *rclksrc[] = { [0] = "busclk", @@ -52,6 +53,7 @@ static struct s3c_audio_pdata i2sv5_pdata = { .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR, .src_clk = rclksrc, + .idma_addr = S5PV210_AUDSS_INT_MEM, }, }, }; diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index 1dd58836fd4f..aac343c180b2 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -59,6 +59,8 @@ #define S5PV210_PA_CFCON 0xE8200000 +#define S5PV210_PA_MFC 0xF1700000 + #define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) #define S5PV210_PA_HSOTG 0xEC000000 @@ -107,6 +109,7 @@ #define S5P_PA_FIMC1 S5PV210_PA_FIMC1 #define S5P_PA_FIMC2 S5PV210_PA_FIMC2 #define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS +#define S5P_PA_MFC S5PV210_PA_MFC #define S5P_PA_ONENAND S5PC110_PA_ONENAND #define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA #define S5P_PA_SDRAM S5PV210_PA_SDRAM diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h index e8d394f8b057..3e22109e1b7b 100644 --- a/arch/arm/mach-s5pv210/include/mach/pm-core.h +++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h @@ -41,3 +41,6 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, { /* nothing here yet */ } + +static inline void s3c_pm_restored_gpios(void) { } +static inline void s3c_pm_saved_gpios(void) { } diff --git a/arch/arm/mach-s5pv210/include/mach/regs-audss.h b/arch/arm/mach-s5pv210/include/mach/regs-audss.h new file mode 100644 index 000000000000..eacc1f790807 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/regs-audss.h @@ -0,0 +1,18 @@ +/* arch/arm/mach-s5pv210/include/mach/regs-audss.h + * + * Copyright (c) 2011 Samsung Electronics + * http://www.samsung.com + * + * S5PV210 Audio SubSystem clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_REGS_AUDSS_H +#define __PLAT_REGS_AUDSS_H __FILE__ + +#define S5PV210_AUDSS_INT_MEM (0xC0000000) + +#endif /* _PLAT_REGS_AUDSS_H */ diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index e0c4d06b9db6..85c2d51a0956 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -46,6 +46,7 @@ #include <plat/sdhci.h> #include <plat/clock.h> #include <plat/s5p-time.h> +#include <plat/mfc.h> #include <plat/regs-fb-v4.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ @@ -808,6 +809,9 @@ static struct platform_device *goni_devices[] __initdata = { &goni_i2c_gpio5, &mmc2_fixed_voltage, &goni_device_gpiokeys, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, &s3c_device_i2c0, &s5p_device_fimc0, &s5p_device_fimc1, @@ -841,6 +845,11 @@ static void __init goni_map_io(void) s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } +static void __init goni_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); +} + static void __init goni_machine_init(void) { /* Radio: call before I2C 1 registeration */ @@ -893,4 +902,5 @@ MACHINE_START(GONI, "GONI") .map_io = goni_map_io, .init_machine = goni_machine_init, .timer = &s5p_timer, + .reserve = &goni_reserve, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index ef20f922249d..5e011fc6720d 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -229,6 +229,7 @@ static struct platform_device *smdkv210_devices[] __initdata = { &s5pv210_device_iis0, &s5pv210_device_spdif, &samsung_asoc_dma, + &samsung_asoc_idma, &samsung_device_keypad, &smdkv210_dm9000, &smdkv210_lcd_lte480wv, diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c index 30e18bc60647..846cd7d69e3e 100644 --- a/arch/arm/mach-tegra/board-harmony.c +++ b/arch/arm/mach-tegra/board-harmony.c @@ -25,7 +25,6 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/i2c.h> -#include <linux/i2c-tegra.h> #include <sound/wm8903.h> @@ -83,22 +82,6 @@ static struct platform_device harmony_audio_device = { }, }; -static struct tegra_i2c_platform_data harmony_i2c1_platform_data = { - .bus_clk_rate = 400000, -}; - -static struct tegra_i2c_platform_data harmony_i2c2_platform_data = { - .bus_clk_rate = 400000, -}; - -static struct tegra_i2c_platform_data harmony_i2c3_platform_data = { - .bus_clk_rate = 400000, -}; - -static struct tegra_i2c_platform_data harmony_dvc_platform_data = { - .bus_clk_rate = 400000, -}; - static struct wm8903_platform_data harmony_wm8903_pdata = { .irq_active_low = 0, .micdet_cfg = 0, @@ -121,11 +104,6 @@ static struct i2c_board_info __initdata wm8903_board_info = { static void __init harmony_i2c_init(void) { - tegra_i2c_device1.dev.platform_data = &harmony_i2c1_platform_data; - tegra_i2c_device2.dev.platform_data = &harmony_i2c2_platform_data; - tegra_i2c_device3.dev.platform_data = &harmony_i2c3_platform_data; - tegra_i2c_device4.dev.platform_data = &harmony_dvc_platform_data; - platform_device_register(&tegra_i2c_device1); platform_device_register(&tegra_i2c_device2); platform_device_register(&tegra_i2c_device3); diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c index 2643d1bd568b..bdd2627dd87b 100644 --- a/arch/arm/mach-tegra/board-paz00-pinmux.c +++ b/arch/arm/mach-tegra/board-paz00-pinmux.c @@ -141,12 +141,10 @@ static struct tegra_pingroup_config paz00_pinmux[] = { }; static struct tegra_gpio_table gpio_table[] = { - { .gpio = TEGRA_GPIO_SD1_CD, .enable = true }, - { .gpio = TEGRA_GPIO_SD1_WP, .enable = true }, - { .gpio = TEGRA_GPIO_SD1_POWER, .enable = true }, - { .gpio = TEGRA_GPIO_SD4_CD, .enable = true }, - { .gpio = TEGRA_GPIO_SD4_WP, .enable = true }, - { .gpio = TEGRA_GPIO_SD4_POWER, .enable = true }, + { .gpio = TEGRA_GPIO_SD1_CD, .enable = true }, + { .gpio = TEGRA_GPIO_SD1_WP, .enable = true }, + { .gpio = TEGRA_GPIO_SD1_POWER, .enable = true }, + { .gpio = TEGRA_ULPI_RST, .enable = true }, }; void paz00_pinmux_init(void) diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index 57e50a823eec..ea2f79c9879b 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -25,6 +25,7 @@ #include <linux/dma-mapping.h> #include <linux/pda_power.h> #include <linux/io.h> +#include <linux/i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -34,6 +35,7 @@ #include <mach/iomap.h> #include <mach/irqs.h> #include <mach/sdhci.h> +#include <mach/gpio.h> #include "board.h" #include "board-paz00.h" @@ -66,10 +68,22 @@ static struct platform_device debug_uart = { static struct platform_device *paz00_devices[] __initdata = { &debug_uart, &tegra_sdhci_device1, - &tegra_sdhci_device2, &tegra_sdhci_device4, }; +static void paz00_i2c_init(void) +{ + platform_device_register(&tegra_i2c_device1); + platform_device_register(&tegra_i2c_device2); + platform_device_register(&tegra_i2c_device4); +} + +static void paz00_usb_init(void) +{ + platform_device_register(&tegra_ehci2_device); + platform_device_register(&tegra_ehci3_device); +} + static void __init tegra_paz00_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) { @@ -84,23 +98,16 @@ static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = { { NULL, NULL, 0, 0}, }; - static struct tegra_sdhci_platform_data sdhci_pdata1 = { .cd_gpio = TEGRA_GPIO_SD1_CD, .wp_gpio = TEGRA_GPIO_SD1_WP, .power_gpio = TEGRA_GPIO_SD1_POWER, }; -static struct tegra_sdhci_platform_data sdhci_pdata2 = { +static struct tegra_sdhci_platform_data sdhci_pdata4 = { .cd_gpio = -1, .wp_gpio = -1, .power_gpio = -1, -}; - -static struct tegra_sdhci_platform_data sdhci_pdata4 = { - .cd_gpio = TEGRA_GPIO_SD4_CD, - .wp_gpio = TEGRA_GPIO_SD4_WP, - .power_gpio = TEGRA_GPIO_SD4_POWER, .is_8bit = 1, }; @@ -111,13 +118,15 @@ static void __init tegra_paz00_init(void) paz00_pinmux_init(); tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1; - tegra_sdhci_device2.dev.platform_data = &sdhci_pdata2; tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; platform_add_devices(paz00_devices, ARRAY_SIZE(paz00_devices)); + + paz00_i2c_init(); + paz00_usb_init(); } -MACHINE_START(PAZ00, "paz00") +MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ") .boot_params = 0x00000100, .fixup = tegra_paz00_fixup, .map_io = tegra_map_common_io, diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h index da193ca76d3b..d4ff39ddaeb3 100644 --- a/arch/arm/mach-tegra/board-paz00.h +++ b/arch/arm/mach-tegra/board-paz00.h @@ -17,12 +17,10 @@ #ifndef _MACH_TEGRA_BOARD_PAZ00_H #define _MACH_TEGRA_BOARD_PAZ00_H -#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5 -#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1 -#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3 -#define TEGRA_GPIO_SD4_CD TEGRA_GPIO_PH2 -#define TEGRA_GPIO_SD4_WP TEGRA_GPIO_PH3 -#define TEGRA_GPIO_SD4_POWER TEGRA_GPIO_PI6 +#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5 +#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1 +#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3 +#define TEGRA_ULPI_RST TEGRA_GPIO_PV0 void paz00_pinmux_init(void); diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c index 10fbbdc8699a..56cbabf6aa68 100644 --- a/arch/arm/mach-tegra/board-seaboard.c +++ b/arch/arm/mach-tegra/board-seaboard.c @@ -19,7 +19,6 @@ #include <linux/platform_device.h> #include <linux/serial_8250.h> #include <linux/i2c.h> -#include <linux/i2c-tegra.h> #include <linux/delay.h> #include <linux/input.h> #include <linux/io.h> @@ -66,22 +65,6 @@ static __initdata struct tegra_clk_init_table seaboard_clk_init_table[] = { { NULL, NULL, 0, 0}, }; -static struct tegra_i2c_platform_data seaboard_i2c1_platform_data = { - .bus_clk_rate = 400000. -}; - -static struct tegra_i2c_platform_data seaboard_i2c2_platform_data = { - .bus_clk_rate = 400000, -}; - -static struct tegra_i2c_platform_data seaboard_i2c3_platform_data = { - .bus_clk_rate = 400000, -}; - -static struct tegra_i2c_platform_data seaboard_dvc_platform_data = { - .bus_clk_rate = 400000, -}; - static struct gpio_keys_button seaboard_gpio_keys_buttons[] = { { .code = SW_LID, @@ -137,9 +120,9 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 = { static struct platform_device *seaboard_devices[] __initdata = { &debug_uart, &tegra_pmu_device, - &tegra_sdhci_device1, - &tegra_sdhci_device3, &tegra_sdhci_device4, + &tegra_sdhci_device3, + &tegra_sdhci_device1, &seaboard_gpio_keys_device, }; @@ -161,11 +144,6 @@ static void __init seaboard_i2c_init(void) i2c_register_board_info(3, &adt7461_device, 1); - tegra_i2c_device1.dev.platform_data = &seaboard_i2c1_platform_data; - tegra_i2c_device2.dev.platform_data = &seaboard_i2c2_platform_data; - tegra_i2c_device3.dev.platform_data = &seaboard_i2c3_platform_data; - tegra_i2c_device4.dev.platform_data = &seaboard_dvc_platform_data; - platform_device_register(&tegra_i2c_device1); platform_device_register(&tegra_i2c_device2); platform_device_register(&tegra_i2c_device3); diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c index d9dc5d297edd..47c596cdbf32 100644 --- a/arch/arm/mach-tegra/board-trimslice-pinmux.c +++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c @@ -29,7 +29,7 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = { {TEGRA_PINGROUP_ATC, TEGRA_MUX_NAND, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_ATD, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_ATE, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_OSC, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_CSUS, TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, @@ -126,7 +126,7 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = { {TEGRA_PINGROUP_SPIH, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_UAA, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_UAB, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_UAC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_UAC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_UAD, TEGRA_MUX_IRDA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_UCA, TEGRA_MUX_UARTC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_UCB, TEGRA_MUX_UARTC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, @@ -145,6 +145,9 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = { static struct tegra_gpio_table gpio_table[] = { { .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true }, /* mmc4 cd */ { .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true }, /* mmc4 wp */ + + { .gpio = TRIMSLICE_GPIO_USB1_MODE, .enable = true }, /* USB1 mode */ + { .gpio = TRIMSLICE_GPIO_USB2_RST, .enable = true }, /* USB2 PHY rst */ }; void __init trimslice_pinmux_init(void) diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c index cda4cfd78e84..89a6d2adc1de 100644 --- a/arch/arm/mach-tegra/board-trimslice.c +++ b/arch/arm/mach-tegra/board-trimslice.c @@ -23,6 +23,8 @@ #include <linux/platform_device.h> #include <linux/serial_8250.h> #include <linux/io.h> +#include <linux/i2c.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -30,6 +32,7 @@ #include <mach/iomap.h> #include <mach/sdhci.h> +#include <mach/gpio.h> #include "board.h" #include "clock.h" @@ -71,12 +74,58 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 = { .power_gpio = -1, }; +static struct platform_device trimslice_audio_device = { + .name = "tegra-snd-trimslice", + .id = 0, +}; + static struct platform_device *trimslice_devices[] __initdata = { &debug_uart, &tegra_sdhci_device1, &tegra_sdhci_device4, + &tegra_i2s_device1, + &tegra_das_device, + &tegra_pcm_device, + &trimslice_audio_device, }; +static struct i2c_board_info trimslice_i2c3_board_info[] = { + { + I2C_BOARD_INFO("tlv320aic23", 0x1a), + }, + { + I2C_BOARD_INFO("em3027", 0x56), + }, +}; + +static void trimslice_i2c_init(void) +{ + platform_device_register(&tegra_i2c_device1); + platform_device_register(&tegra_i2c_device2); + platform_device_register(&tegra_i2c_device3); + + i2c_register_board_info(2, trimslice_i2c3_board_info, + ARRAY_SIZE(trimslice_i2c3_board_info)); +} + +static void trimslice_usb_init(void) +{ + int err; + + platform_device_register(&tegra_ehci3_device); + + platform_device_register(&tegra_ehci2_device); + + err = gpio_request_one(TRIMSLICE_GPIO_USB1_MODE, GPIOF_OUT_INIT_HIGH, + "usb1mode"); + if (err) { + pr_err("TrimSlice: failed to obtain USB1 mode gpio: %d\n", err); + return; + } + + platform_device_register(&tegra_ehci1_device); +} + static void __init tegra_trimslice_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) { @@ -90,6 +139,10 @@ static void __init tegra_trimslice_fixup(struct machine_desc *desc, static __initdata struct tegra_clk_init_table trimslice_clk_init_table[] = { /* name parent rate enabled */ { "uarta", "pll_p", 216000000, true }, + { "pll_a", "pll_p_out1", 56448000, true }, + { "pll_a_out0", "pll_a", 11289600, true }, + { "cdev1", NULL, 0, true }, + { "i2s1", "pll_a_out0", 11289600, false}, { NULL, NULL, 0, 0}, }; @@ -112,6 +165,9 @@ static void __init tegra_trimslice_init(void) tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; platform_add_devices(trimslice_devices, ARRAY_SIZE(trimslice_devices)); + + trimslice_i2c_init(); + trimslice_usb_init(); } MACHINE_START(TRIMSLICE, "trimslice") diff --git a/arch/arm/mach-tegra/board-trimslice.h b/arch/arm/mach-tegra/board-trimslice.h index e8ef6291c6f1..7a7dee86b4da 100644 --- a/arch/arm/mach-tegra/board-trimslice.h +++ b/arch/arm/mach-tegra/board-trimslice.h @@ -20,6 +20,9 @@ #define TRIMSLICE_GPIO_SD4_CD TEGRA_GPIO_PP1 /* mmc4 cd */ #define TRIMSLICE_GPIO_SD4_WP TEGRA_GPIO_PP2 /* mmc4 wp */ +#define TRIMSLICE_GPIO_USB1_MODE TEGRA_GPIO_PV2 /* USB1 mode */ +#define TRIMSLICE_GPIO_USB2_RST TEGRA_GPIO_PV0 /* USB2 PHY reset */ + void trimslice_pinmux_init(void); #endif diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c index 1528f9daef1f..57e35d20c24c 100644 --- a/arch/arm/mach-tegra/devices.c +++ b/arch/arm/mach-tegra/devices.c @@ -22,10 +22,14 @@ #include <linux/dma-mapping.h> #include <linux/fsl_devices.h> #include <linux/serial_8250.h> +#include <linux/i2c-tegra.h> +#include <linux/platform_data/tegra_usb.h> #include <asm/pmu.h> #include <mach/irqs.h> #include <mach/iomap.h> #include <mach/dma.h> +#include <mach/usb_phy.h> +#include "gpio-names.h" static struct resource i2c_resource1[] = { [0] = { @@ -79,13 +83,29 @@ static struct resource i2c_resource4[] = { }, }; +static struct tegra_i2c_platform_data tegra_i2c1_platform_data = { + .bus_clk_rate = 400000, +}; + +static struct tegra_i2c_platform_data tegra_i2c2_platform_data = { + .bus_clk_rate = 400000, +}; + +static struct tegra_i2c_platform_data tegra_i2c3_platform_data = { + .bus_clk_rate = 400000, +}; + +static struct tegra_i2c_platform_data tegra_dvc_platform_data = { + .bus_clk_rate = 400000, +}; + struct platform_device tegra_i2c_device1 = { .name = "tegra-i2c", .id = 0, .resource = i2c_resource1, .num_resources = ARRAY_SIZE(i2c_resource1), .dev = { - .platform_data = 0, + .platform_data = &tegra_i2c1_platform_data, }, }; @@ -95,7 +115,7 @@ struct platform_device tegra_i2c_device2 = { .resource = i2c_resource2, .num_resources = ARRAY_SIZE(i2c_resource2), .dev = { - .platform_data = 0, + .platform_data = &tegra_i2c2_platform_data, }, }; @@ -105,7 +125,7 @@ struct platform_device tegra_i2c_device3 = { .resource = i2c_resource3, .num_resources = ARRAY_SIZE(i2c_resource3), .dev = { - .platform_data = 0, + .platform_data = &tegra_i2c3_platform_data, }, }; @@ -115,7 +135,7 @@ struct platform_device tegra_i2c_device4 = { .resource = i2c_resource4, .num_resources = ARRAY_SIZE(i2c_resource4), .dev = { - .platform_data = 0, + .platform_data = &tegra_dvc_platform_data, }, }; @@ -334,6 +354,28 @@ static struct resource tegra_usb3_resources[] = { }, }; +static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = { + /* All existing boards use GPIO PV0 for phy reset */ + .reset_gpio = TEGRA_GPIO_PV0, + .clk = "cdev2", +}; + +static struct tegra_ehci_platform_data tegra_ehci1_pdata = { + .operating_mode = TEGRA_USB_OTG, + .power_down_on_bus_suspend = 1, +}; + +static struct tegra_ehci_platform_data tegra_ehci2_pdata = { + .phy_config = &tegra_ehci2_ulpi_phy_config, + .operating_mode = TEGRA_USB_HOST, + .power_down_on_bus_suspend = 1, +}; + +static struct tegra_ehci_platform_data tegra_ehci3_pdata = { + .operating_mode = TEGRA_USB_HOST, + .power_down_on_bus_suspend = 1, +}; + static u64 tegra_ehci_dmamask = DMA_BIT_MASK(32); struct platform_device tegra_ehci1_device = { @@ -342,6 +384,7 @@ struct platform_device tegra_ehci1_device = { .dev = { .dma_mask = &tegra_ehci_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &tegra_ehci1_pdata, }, .resource = tegra_usb1_resources, .num_resources = ARRAY_SIZE(tegra_usb1_resources), @@ -353,6 +396,7 @@ struct platform_device tegra_ehci2_device = { .dev = { .dma_mask = &tegra_ehci_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &tegra_ehci2_pdata, }, .resource = tegra_usb2_resources, .num_resources = ARRAY_SIZE(tegra_usb2_resources), @@ -364,6 +408,7 @@ struct platform_device tegra_ehci3_device = { .dev = { .dma_mask = &tegra_ehci_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &tegra_ehci3_pdata, }, .resource = tegra_usb3_resources, .num_resources = ARRAY_SIZE(tegra_usb3_resources), diff --git a/arch/arm/mach-tegra/include/mach/barriers.h b/arch/arm/mach-tegra/include/mach/barriers.h deleted file mode 100644 index 425b42e91ef6..000000000000 --- a/arch/arm/mach-tegra/include/mach/barriers.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/barriers.h - * - * Copyright (C) 2010 ARM Ltd. - * Written by Catalin Marinas <catalin.marinas@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __MACH_BARRIERS_H -#define __MACH_BARRIERS_H - -#include <asm/outercache.h> - -#define rmb() dsb() -#define wmb() do { dsb(); outer_sync(); } while (0) -#define mb() wmb() - -#endif /* __MACH_BARRIERS_H */ diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 32ca6267b9ff..0886cbccddee 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -121,7 +121,7 @@ void __init smp_init_cpus(void) } for (i = 0; i < ncores; i++) - cpu_set(i, cpu_possible_map); + set_cpu_possible(i, true); set_smp_cross_call(gic_raise_softirq); } diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index bb618075fab6..0fe9b3ee2947 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -2182,8 +2182,8 @@ struct clk tegra_list_clks[] = { PERIPH_CLK("tvo", "tvo", NULL, 49, 0x188, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ PERIPH_CLK("hdmi", "hdmi", NULL, 51, 0x18c, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ PERIPH_CLK("tvdac", "tvdac", NULL, 53, 0x194, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ - PERIPH_CLK("disp1", "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* scales with voltage and process_id */ - PERIPH_CLK("disp2", "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* scales with voltage and process_id */ + PERIPH_CLK("disp1", "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_plld_pllc_clkm, MUX), /* scales with voltage and process_id */ + PERIPH_CLK("disp2", "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_plld_pllc_clkm, MUX), /* scales with voltage and process_id */ PERIPH_CLK("usbd", "fsl-tegra-udc", NULL, 22, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ PERIPH_CLK("usb2", "tegra-ehci.1", NULL, 58, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ PERIPH_CLK("usb3", "tegra-ehci.2", NULL, 59, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c index 5767208f1c1d..7b597e2b19e2 100644 --- a/arch/arm/mach-u300/spi.c +++ b/arch/arm/mach-u300/spi.c @@ -40,8 +40,8 @@ struct pl022_config_chip dummy_chip_info = { .hierarchy = SSP_MASTER, /* 0 = drive TX even as slave, 1 = do not drive TX as slave */ .slave_tx_disable = 0, - .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, - .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, + .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM, + .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC, .ctrl_len = SSP_BITS_12, .wait_state = SSP_MWIRE_WAIT_ZERO, .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index 18d7fa0603c2..5f51bdeef0ef 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -27,9 +27,6 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> -/* Be able to sleep for atleast 4 seconds (usually more) */ -#define APPTIMER_MIN_RANGE 4 - /* * APP side special timer registers * This timer contains four timers which can fire an interrupt each. @@ -309,11 +306,11 @@ static int u300_set_next_event(unsigned long cycles, /* Use general purpose timer 1 as clock event */ static struct clock_event_device clockevent_u300_1mhz = { - .name = "GPT1", - .rating = 300, /* Reasonably fast and accurate clock event */ - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = u300_set_next_event, - .set_mode = u300_set_mode, + .name = "GPT1", + .rating = 300, /* Reasonably fast and accurate clock event */ + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = u300_set_next_event, + .set_mode = u300_set_mode, }; /* Clock event timer interrupt handler */ @@ -328,9 +325,9 @@ static irqreturn_t u300_timer_interrupt(int irq, void *dev_id) } static struct irqaction u300_timer_irq = { - .name = "U300 Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = u300_timer_interrupt, + .name = "U300 Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = u300_timer_interrupt, }; /* @@ -413,16 +410,10 @@ static void __init u300_timer_init(void) "GPT2", rate, 300, 32, clocksource_mmio_readl_up)) pr_err("timer: failed to initialize U300 clock source\n"); - clockevents_calc_mult_shift(&clockevent_u300_1mhz, - rate, APPTIMER_MIN_RANGE); - /* 32bit counter, so 32bits delta is max */ - clockevent_u300_1mhz.max_delta_ns = - clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz); - /* This timer is slow enough to set for 1 cycle == 1 MHz */ - clockevent_u300_1mhz.min_delta_ns = - clockevent_delta2ns(1, &clockevent_u300_1mhz); - clockevent_u300_1mhz.cpumask = cpumask_of(0); - clockevents_register_device(&clockevent_u300_1mhz); + /* Configure and register the clockevent */ + clockevents_config_and_register(&clockevent_u300_1mhz, rate, + 1, 0xffffffff); + /* * TODO: init and register the rest of the timers too, they can be * used by hrtimers! diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index f8b9392ee347..4210cb434dbc 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -20,7 +20,7 @@ config UX500_SOC_DB8500 endmenu -menu "Ux500 target platform" +menu "Ux500 target platform (boards)" config MACH_U8500 bool "U8500 Development platform" @@ -29,6 +29,19 @@ config MACH_U8500 help Include support for the mop500 development platform. +config MACH_HREFV60 + bool "U85000 Development platform, HREFv60 version" + depends on UX500_SOC_DB8500 + help + Include support for the HREFv60 new development platform. + +config MACH_SNOWBALL + bool "U8500 Snowball platform" + depends on UX500_SOC_DB8500 + select MACH_U8500 + help + Include support for the snowball development platform. + config MACH_U5500 bool "U5500 Development platform" depends on UX500_SOC_DB5500 diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index 70cdbd60596a..f26fd76f72b4 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -236,6 +236,46 @@ static pin_cfg_t mop500_pins_hrefv60[] = { }; +static pin_cfg_t snowball_pins[] = { + /* SSP0, to AB8500 */ + GPIO143_SSP0_CLK, + GPIO144_SSP0_FRM, + GPIO145_SSP0_RXD | PIN_PULL_DOWN, + GPIO146_SSP0_TXD, + + /* MMC0: MicroSD card */ + GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH, + + /* MMC2: LAN */ + GPIO86_SM_ADQ0, + GPIO87_SM_ADQ1, + GPIO88_SM_ADQ2, + GPIO89_SM_ADQ3, + GPIO90_SM_ADQ4, + GPIO91_SM_ADQ5, + GPIO92_SM_ADQ6, + GPIO93_SM_ADQ7, + + GPIO94_SM_ADVn, + GPIO95_SM_CS0n, + GPIO96_SM_OEn, + GPIO97_SM_WEn, + + GPIO128_SM_CKO, + GPIO130_SM_FBCLK, + GPIO131_SM_ADQ8, + GPIO132_SM_ADQ9, + GPIO133_SM_ADQ10, + GPIO134_SM_ADQ11, + GPIO135_SM_ADQ12, + GPIO136_SM_ADQ13, + GPIO137_SM_ADQ14, + GPIO138_SM_ADQ15, + + /* RSTn_LAN */ + GPIO141_GPIO | PIN_OUTPUT_HIGH, +}; + void __init mop500_pins_init(void) { nmk_config_pins(mop500_pins_common, @@ -243,6 +283,9 @@ void __init mop500_pins_init(void) if (machine_is_hrefv60()) nmk_config_pins(mop500_pins_hrefv60, ARRAY_SIZE(mop500_pins_hrefv60)); + else if (machine_is_snowball()) + nmk_config_pins(snowball_pins, + ARRAY_SIZE(snowball_pins)); else nmk_config_pins(mop500_pins_default, ARRAY_SIZE(mop500_pins_default)); diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 0f2e522f387d..2735d03996cf 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -272,7 +272,14 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .max_uV = 2900000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, /* must be on for display */ + .boot_on = 1, /* display is on at boot */ + /* + * This voltage cannot be disabled right now because + * it is somehow affecting the external MMC + * functionality, though that typically will use + * AUX3. + */ + .always_on = 1, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), .consumer_supplies = ab8500_vaux1_consumers, diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 7c6cb4fa47a9..d0cb9e5eb87c 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -32,13 +32,32 @@ #define MCI_DATA31DIREN (1 << 5) #define MCI_FBCLKEN (1 << 7) +/* GPIO pins used by the sdi0 level shifter */ +static int sdi0_en = -1; +static int sdi0_vsel = -1; + static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd, unsigned char power_mode) { - if (power_mode == MMC_POWER_UP) - gpio_set_value_cansleep(GPIO_SDMMC_EN, 1); - else if (power_mode == MMC_POWER_OFF) - gpio_set_value_cansleep(GPIO_SDMMC_EN, 0); + switch (power_mode) { + case MMC_POWER_UP: + case MMC_POWER_ON: + /* + * Level shifter voltage should depend on vdd to when deciding + * on either 1.8V or 2.9V. Once the decision has been made the + * level shifter must be disabled and re-enabled with a changed + * select signal in order to switch the voltage. Since there is + * no framework support yet for indicating 1.8V in vdd, use the + * default 2.9V. + */ + gpio_direction_output(sdi0_vsel, 0); + gpio_direction_output(sdi0_en, 1); + break; + case MMC_POWER_OFF: + gpio_direction_output(sdi0_vsel, 0); + gpio_direction_output(sdi0_en, 0); + break; + } return MCI_FBCLKEN | MCI_CMDDIREN | MCI_DATA0DIREN | MCI_DATA2DIREN | MCI_DATA31DIREN; @@ -67,8 +86,10 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { static struct mmci_platform_data mop500_sdi0_data = { .vdd_handler = mop500_sdi0_vdd_handler, .ocr_mask = MMC_VDD_29_30, - .f_max = 100000000, - .capabilities = MMC_CAP_4_BIT_DATA, + .f_max = 50000000, + .capabilities = MMC_CAP_4_BIT_DATA | + MMC_CAP_SD_HIGHSPEED | + MMC_CAP_MMC_HIGHSPEED, .gpio_wp = -1, #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, @@ -77,10 +98,6 @@ static struct mmci_platform_data mop500_sdi0_data = { #endif }; -/* GPIO pins used by the sdi0 level shifter */ -static int sdi0_en = -1; -static int sdi0_vsel = -1; - static void sdi0_configure(void) { int ret; @@ -140,7 +157,7 @@ static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = { static struct mmci_platform_data mop500_sdi2_data = { .ocr_mask = MMC_VDD_165_195, - .f_max = 100000000, + .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_cd = -1, .gpio_wp = -1, @@ -177,7 +194,7 @@ static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = { static struct mmci_platform_data mop500_sdi4_data = { .ocr_mask = MMC_VDD_29_30, - .f_max = 100000000, + .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_MMC_HIGHSPEED, .gpio_cd = -1, @@ -199,17 +216,27 @@ void __init mop500_sdi_init(void) /* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */ if (!cpu_is_u8500v10()) mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; - db8500_add_sdi2(&mop500_sdi2_data, periphid); + /* sdi2 on snowball is in ATL_B mode for FSMC (LAN) */ + if (!machine_is_snowball()) + db8500_add_sdi2(&mop500_sdi2_data, periphid); /* On-board eMMC */ db8500_add_sdi4(&mop500_sdi4_data, periphid); - if (machine_is_hrefv60()) { - mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; - sdi0_en = HREFV60_SDMMC_EN_GPIO; - sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; + if (machine_is_hrefv60() || machine_is_snowball()) { + if (machine_is_hrefv60()) { + mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; + sdi0_en = HREFV60_SDMMC_EN_GPIO; + sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; + } else if (machine_is_snowball()) { + mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; + mop500_sdi0_data.cd_invert = true; + sdi0_en = SNOWBALL_SDMMC_EN_GPIO; + sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO; + } sdi0_configure(); } + /* * On boards with the TC35892 GPIO expander, sdi0 will finally * be added when the TC35892 initializes and calls diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c index 69cce41f602a..5af36aa56c08 100644 --- a/arch/arm/mach-ux500/board-mop500-uib.c +++ b/arch/arm/mach-ux500/board-mop500-uib.c @@ -25,7 +25,7 @@ struct uib { void (*init)(void); }; -static struct __initdata uib mop500_uibs[] = { +static struct uib __initdata mop500_uibs[] = { [STUIB] = { .name = "ST-UIB", .option = "stuib", diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 2a08c07dec6d..cd54abaccd96 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -26,9 +26,11 @@ #include <linux/mfd/ab8500/gpio.h> #include <linux/leds-lp5521.h> #include <linux/input.h> +#include <linux/smsc911x.h> #include <linux/gpio_keys.h> #include <linux/delay.h> +#include <linux/leds.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -47,6 +49,26 @@ #include "board-mop500.h" #include "board-mop500-regulators.h" +static struct gpio_led snowball_led_array[] = { + { + .name = "user_led", + .default_trigger = "none", + .gpio = 142, + }, +}; + +static struct gpio_led_platform_data snowball_led_data = { + .leds = snowball_led_array, + .num_leds = ARRAY_SIZE(snowball_led_array), +}; + +static struct platform_device snowball_led_dev = { + .name = "leds-gpio", + .dev = { + .platform_data = &snowball_led_data, + }, +}; + static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { .gpio_base = MOP500_AB8500_GPIO(0), .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, @@ -69,6 +91,97 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { 0x7A, 0x00, 0x00}, }; +static struct gpio_keys_button snowball_key_array[] = { + { + .gpio = 32, + .type = EV_KEY, + .code = KEY_1, + .desc = "userpb", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 151, + .type = EV_KEY, + .code = KEY_2, + .desc = "extkb1", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 152, + .type = EV_KEY, + .code = KEY_3, + .desc = "extkb2", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 161, + .type = EV_KEY, + .code = KEY_4, + .desc = "extkb3", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 162, + .type = EV_KEY, + .code = KEY_5, + .desc = "extkb4", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data snowball_key_data = { + .buttons = snowball_key_array, + .nbuttons = ARRAY_SIZE(snowball_key_array), +}; + +static struct platform_device snowball_key_dev = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &snowball_key_data, + } +}; + +static struct smsc911x_platform_config snowball_sbnet_cfg = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, + .shift = 1, +}; + +static struct resource sbnet_res[] = { + { + .name = "smsc911x-memory", + .start = (0x5000 << 16), + .end = (0x5000 << 16) + 0xffff, + .flags = IORESOURCE_MEM, + }, + { + .start = NOMADIK_GPIO_TO_IRQ(140), + .end = NOMADIK_GPIO_TO_IRQ(140), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +}; + +static struct platform_device snowball_sbnet_dev = { + .name = "smsc911x", + .num_resources = ARRAY_SIZE(sbnet_res), + .resource = sbnet_res, + .dev = { + .platform_data = &snowball_sbnet_cfg, + }, +}; + static struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, .regulator_reg_init = ab8500_regulator_reg_init, @@ -295,8 +408,9 @@ static void mop500_prox_deactivate(struct device *dev) } /* add any platform devices here - TODO */ -static struct platform_device *platform_devs[] __initdata = { +static struct platform_device *mop500_platform_devs[] __initdata = { &mop500_gpio_keys_device, + &ab8500_device, }; #ifdef CONFIG_STE_DMA40 @@ -478,6 +592,13 @@ static void __init mop500_uart_init(void) db8500_add_uart2(&uart2_plat); } +static struct platform_device *snowball_platform_devs[] __initdata = { + &snowball_led_dev, + &snowball_key_dev, + &snowball_sbnet_dev, + &ab8500_device, +}; + static void __init mop500_init_machine(void) { int i2c0_devs; @@ -487,24 +608,29 @@ static void __init mop500_init_machine(void) * all these GPIO pins to the internal GPIO controller * instead. */ - if (machine_is_hrefv60()) - mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - else - mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + if (!machine_is_snowball()) { + if (machine_is_hrefv60()) + mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; + else + mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + } u8500_init_devices(); mop500_pins_init(); - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); + if (machine_is_snowball()) + platform_add_devices(snowball_platform_devs, + ARRAY_SIZE(snowball_platform_devs)); + else + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); mop500_i2c_init(); mop500_sdi_init(); mop500_spi_init(); mop500_uart_init(); - platform_device_register(&ab8500_device); - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); if (machine_is_hrefv60()) i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; @@ -512,6 +638,9 @@ static void __init mop500_init_machine(void) i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, ARRAY_SIZE(mop500_i2c2_devices)); + + /* This board has full regulator constraints */ + regulator_has_full_constraints(); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform") @@ -531,3 +660,12 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") .timer = &ux500_timer, .init_machine = mop500_init_machine, MACHINE_END + +MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") + .boot_params = 0x100, + .map_io = u8500_map_io, + .init_irq = ux500_init_irq, + /* we re-use nomadik timer here */ + .timer = &ux500_timer, + .init_machine = mop500_init_machine, +MACHINE_END diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 03a31cc9b084..ee77a8970c33 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -7,6 +7,11 @@ #ifndef __BOARD_MOP500_H #define __BOARD_MOP500_H +/* snowball GPIO for MMC card */ +#define SNOWBALL_SDMMC_EN_GPIO 217 +#define SNOWBALL_SDMMC_1V8_3V_GPIO 228 +#define SNOWBALL_SDMMC_CD_GPIO 218 + /* HREFv60-specific GPIO assignments, this board has no GPIO expander */ #define HREFV60_TOUCH_RST_GPIO 143 #define HREFV60_PROX_SENSE_GPIO 217 diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 7d107be63eb4..e832664d1bd9 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -14,6 +14,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/clkdev.h> +#include <linux/cpufreq.h> #include <plat/mtu.h> #include <mach/hardware.h> @@ -742,6 +743,51 @@ err_out: late_initcall(clk_debugfs_init); #endif /* defined(CONFIG_DEBUG_FS) */ +unsigned long clk_smp_twd_rate = 400000000; + +unsigned long clk_smp_twd_get_rate(struct clk *clk) +{ + return clk_smp_twd_rate; +} + +static struct clk clk_smp_twd = { + .get_rate = clk_smp_twd_get_rate, + .name = "smp_twd", +}; + +static struct clk_lookup clk_smp_twd_lookup = { + .dev_id = "smp_twd", + .clk = &clk_smp_twd, +}; + +#ifdef CONFIG_CPU_FREQ + +static int clk_twd_cpufreq_transition(struct notifier_block *nb, + unsigned long state, void *data) +{ + struct cpufreq_freqs *f = data; + + if (state == CPUFREQ_PRECHANGE) { + /* Save frequency in simple Hz */ + clk_smp_twd_rate = f->new * 1000; + } + + return NOTIFY_OK; +} + +static struct notifier_block clk_twd_cpufreq_nb = { + .notifier_call = clk_twd_cpufreq_transition, +}; + +static int clk_init_smp_twd_cpufreq(void) +{ + return cpufreq_register_notifier(&clk_twd_cpufreq_nb, + CPUFREQ_TRANSITION_NOTIFIER); +} +late_initcall(clk_init_smp_twd_cpufreq); + +#endif + int __init clk_init(void) { if (cpu_is_u8500ed()) { @@ -762,6 +808,8 @@ int __init clk_init(void) else clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks)); + clkdev_add(&clk_smp_twd_lookup); + #ifdef CONFIG_DEBUG_FS clk_debugfs_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks)); if (cpu_is_u8500ed()) diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index c01bc19e3c5e..22705d246fc7 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -44,6 +44,7 @@ static struct map_desc u5500_io_desc[] __initdata = { __IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K), __IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K), __IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K), + __IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K), }; static struct resource db5500_pmu_resources[] = { diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h index 088b550c40df..7dd08074c37b 100644 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -54,7 +54,8 @@ static inline void arch_decomp_setup(void) if (machine_is_u8500() || machine_is_svp8500v1() || machine_is_svp8500v2() || - machine_is_hrefv60()) + machine_is_hrefv60() || + machine_is_snowball()) ux500_uart_base = U8500_UART2_BASE; else if (machine_is_u5500()) ux500_uart_base = U5500_UART0_BASE; diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 82e535953fd9..0a01cbdfe063 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -6,6 +6,7 @@ */ #include <linux/platform_device.h> #include <linux/usb/musb.h> +#include <linux/dma-mapping.h> #include <plat/ste_dma40.h> #include <mach/hardware.h> #include <mach/usb.h> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index a0ea5848d40d..88633fe01a5d 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -822,7 +822,7 @@ config CACHE_L2X0 REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \ ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \ ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \ - ARCH_PRIMA2 || ARCH_ZYNQ + ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX default y select OUTER_CACHE select OUTER_CACHE_SYNC diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c index fb166b20f60f..0d6ed31bdbf2 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/plat-mxc/devices.c @@ -95,8 +95,22 @@ struct device mxc_aips_bus = { .parent = &platform_bus, }; +struct device mxc_ahb_bus = { + .init_name = "mxc_ahb", + .parent = &platform_bus, +}; + static int __init mxc_device_init(void) { - return device_register(&mxc_aips_bus); + int ret; + + ret = device_register(&mxc_aips_bus); + if (IS_ERR_VALUE(ret)) + goto done; + + ret = device_register(&mxc_ahb_bus); + +done: + return ret; } core_initcall(mxc_device_init); diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c index c64f015e031b..2b0fdb23beb8 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-dma.c +++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c @@ -6,207 +6,29 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <linux/compiler.h> -#include <linux/err.h> -#include <linux/init.h> - -#include <mach/hardware.h> #include <mach/devices-common.h> -#include <mach/sdma.h> - -struct imx_imx_sdma_data { - resource_size_t iobase; - resource_size_t irq; - struct sdma_platform_data pdata; -}; - -#define imx_imx_sdma_data_entry_single(soc, _sdma_version, _cpu_name, _to_version)\ - { \ - .iobase = soc ## _SDMA ## _BASE_ADDR, \ - .irq = soc ## _INT_SDMA, \ - .pdata = { \ - .sdma_version = _sdma_version, \ - .cpu_name = _cpu_name, \ - .to_version = _to_version, \ - }, \ - } - -#ifdef CONFIG_SOC_IMX25 -struct imx_imx_sdma_data imx25_imx_sdma_data __initconst = - imx_imx_sdma_data_entry_single(MX25, 2, "imx25", 1); -#endif /* ifdef CONFIG_SOC_IMX25 */ -#ifdef CONFIG_SOC_IMX31 -struct imx_imx_sdma_data imx31_imx_sdma_data __initdata = - imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 1); -#endif /* ifdef CONFIG_SOC_IMX31 */ - -#ifdef CONFIG_SOC_IMX35 -struct imx_imx_sdma_data imx35_imx_sdma_data __initdata = - imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 1); -#endif /* ifdef CONFIG_SOC_IMX35 */ - -#ifdef CONFIG_SOC_IMX51 -struct imx_imx_sdma_data imx51_imx_sdma_data __initconst = - imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 1); -#endif /* ifdef CONFIG_SOC_IMX51 */ +struct platform_device __init __maybe_unused *imx_add_imx_dma(void) +{ + return platform_device_register_resndata(&mxc_ahb_bus, + "imx-dma", -1, NULL, 0, NULL, 0); +} -static struct platform_device __init __maybe_unused *imx_add_imx_sdma( - const struct imx_imx_sdma_data *data) +struct platform_device __init __maybe_unused *imx_add_imx_sdma( + resource_size_t iobase, int irq, struct sdma_platform_data *pdata) { struct resource res[] = { { - .start = data->iobase, - .end = data->iobase + SZ_16K - 1, + .start = iobase, + .end = iobase + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { - .start = data->irq, - .end = data->irq, + .start = irq, + .end = irq, .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device("imx-sdma", -1, - res, ARRAY_SIZE(res), - &data->pdata, sizeof(data->pdata)); -} - -static struct platform_device __init __maybe_unused *imx_add_imx_dma(void) -{ - return imx_add_platform_device("imx-dma", -1, NULL, 0, NULL, 0); -} - -#ifdef CONFIG_ARCH_MX25 -static struct sdma_script_start_addrs addr_imx25 = { - .ap_2_ap_addr = 729, - .uart_2_mcu_addr = 904, - .per_2_app_addr = 1255, - .mcu_2_app_addr = 834, - .uartsh_2_mcu_addr = 1120, - .per_2_shp_addr = 1329, - .mcu_2_shp_addr = 1048, - .ata_2_mcu_addr = 1560, - .mcu_2_ata_addr = 1479, - .app_2_per_addr = 1189, - .app_2_mcu_addr = 770, - .shp_2_per_addr = 1407, - .shp_2_mcu_addr = 979, -}; -#endif - -#ifdef CONFIG_SOC_IMX31 -static struct sdma_script_start_addrs addr_imx31_to1 = { - .per_2_per_addr = 1677, -}; - -static struct sdma_script_start_addrs addr_imx31_to2 = { - .ap_2_ap_addr = 423, - .ap_2_bp_addr = 829, - .bp_2_ap_addr = 1029, -}; -#endif - -#ifdef CONFIG_SOC_IMX35 -static struct sdma_script_start_addrs addr_imx35_to1 = { - .ap_2_ap_addr = 642, - .uart_2_mcu_addr = 817, - .mcu_2_app_addr = 747, - .uartsh_2_mcu_addr = 1183, - .per_2_shp_addr = 1033, - .mcu_2_shp_addr = 961, - .ata_2_mcu_addr = 1333, - .mcu_2_ata_addr = 1252, - .app_2_mcu_addr = 683, - .shp_2_per_addr = 1111, - .shp_2_mcu_addr = 892, -}; - -static struct sdma_script_start_addrs addr_imx35_to2 = { - .ap_2_ap_addr = 729, - .uart_2_mcu_addr = 904, - .per_2_app_addr = 1597, - .mcu_2_app_addr = 834, - .uartsh_2_mcu_addr = 1270, - .per_2_shp_addr = 1120, - .mcu_2_shp_addr = 1048, - .ata_2_mcu_addr = 1429, - .mcu_2_ata_addr = 1339, - .app_2_per_addr = 1531, - .app_2_mcu_addr = 770, - .shp_2_per_addr = 1198, - .shp_2_mcu_addr = 979, -}; -#endif - -#ifdef CONFIG_SOC_IMX51 -static struct sdma_script_start_addrs addr_imx51 = { - .ap_2_ap_addr = 642, - .uart_2_mcu_addr = 817, - .mcu_2_app_addr = 747, - .mcu_2_shp_addr = 961, - .ata_2_mcu_addr = 1473, - .mcu_2_ata_addr = 1392, - .app_2_per_addr = 1033, - .app_2_mcu_addr = 683, - .shp_2_per_addr = 1251, - .shp_2_mcu_addr = 892, -}; -#endif - -static int __init imxXX_add_imx_dma(void) -{ - struct platform_device *ret; - -#if defined(CONFIG_SOC_IMX21) || defined(CONFIG_SOC_IMX27) - if (cpu_is_mx21() || cpu_is_mx27()) - ret = imx_add_imx_dma(); - else -#endif - -#if defined(CONFIG_SOC_IMX25) - if (cpu_is_mx25()) { - imx25_imx_sdma_data.pdata.script_addrs = &addr_imx25; - ret = imx_add_imx_sdma(&imx25_imx_sdma_data); - } else -#endif - -#if defined(CONFIG_SOC_IMX31) - if (cpu_is_mx31()) { - int to_version = mx31_revision() >> 4; - imx31_imx_sdma_data.pdata.to_version = to_version; - if (to_version == 1) - imx31_imx_sdma_data.pdata.script_addrs = &addr_imx31_to1; - else - imx31_imx_sdma_data.pdata.script_addrs = &addr_imx31_to2; - ret = imx_add_imx_sdma(&imx31_imx_sdma_data); - } else -#endif - -#if defined(CONFIG_SOC_IMX35) - if (cpu_is_mx35()) { - int to_version = mx35_revision() >> 4; - imx35_imx_sdma_data.pdata.to_version = to_version; - if (to_version == 1) - imx35_imx_sdma_data.pdata.script_addrs = &addr_imx35_to1; - else - imx35_imx_sdma_data.pdata.script_addrs = &addr_imx35_to2; - ret = imx_add_imx_sdma(&imx35_imx_sdma_data); - } else -#endif - -#if defined(CONFIG_SOC_IMX51) - if (cpu_is_mx51()) { - int to_version = mx51_revision() >> 4; - imx51_imx_sdma_data.pdata.to_version = to_version; - imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51; - ret = imx_add_imx_sdma(&imx51_imx_sdma_data); - } else -#endif - ret = ERR_PTR(-ENODEV); - - if (IS_ERR(ret)) - return PTR_ERR(ret); - - return 0; + return platform_device_register_resndata(&mxc_ahb_bus, "imx-sdma", + -1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } -arch_initcall(imxXX_add_imx_dma); diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c index 2ab74f0da9a6..afe60f7244a8 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c +++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c @@ -94,8 +94,9 @@ const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst = { imx_imx_i2c_data_entry(MX53, _id, _hwid, SZ_4K) imx53_imx_i2c_data_entry(0, 1), imx53_imx_i2c_data_entry(1, 2), + imx53_imx_i2c_data_entry(2, 3), }; -#endif /* ifdef CONFIG_SOC_IMX51 */ +#endif /* ifdef CONFIG_SOC_IMX53 */ struct platform_device *__init imx_add_imx_i2c( const struct imx_imx_i2c_data *data, diff --git a/arch/arm/plat-mxc/devices/platform-imx-keypad.c b/arch/arm/plat-mxc/devices/platform-imx-keypad.c index 26366114b021..479c3e9f771f 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-keypad.c +++ b/arch/arm/plat-mxc/devices/platform-imx-keypad.c @@ -46,6 +46,11 @@ const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst = imx_imx_keypad_data_entry_single(MX51, SZ_16); #endif /* ifdef CONFIG_SOC_IMX51 */ +#ifdef CONFIG_SOC_IMX53 +const struct imx_imx_keypad_data imx53_imx_keypad_data __initconst = + imx_imx_keypad_data_entry_single(MX53, SZ_16); +#endif /* ifdef CONFIG_SOC_IMX53 */ + struct platform_device *__init imx_add_imx_keypad( const struct imx_imx_keypad_data *data, const struct matrix_keymap_data *pdata) diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/plat-mxc/devices/platform-imx-ssi.c index 66b8593e9b69..21c6f30e1017 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-ssi.c +++ b/arch/arm/plat-mxc/devices/platform-imx-ssi.c @@ -76,6 +76,16 @@ const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX51 */ +#ifdef CONFIG_SOC_IMX53 +const struct imx_imx_ssi_data imx53_imx_ssi_data[] __initconst = { +#define imx53_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX53, _id, _hwid, SZ_16K) + imx53_imx_ssi_data_entry(0, 1), + imx53_imx_ssi_data_entry(1, 2), + imx53_imx_ssi_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_SOC_IMX53 */ + struct platform_device *__init imx_add_imx_ssi( const struct imx_imx_ssi_data *data, const struct imx_ssi_platform_data *pdata) diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c index 3c854c2cc6dd..cfce8c918b73 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-uart.c +++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c @@ -123,6 +123,8 @@ const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst = { imx53_imx_uart_data_entry(0, 1), imx53_imx_uart_data_entry(1, 2), imx53_imx_uart_data_entry(2, 3), + imx53_imx_uart_data_entry(3, 4), + imx53_imx_uart_data_entry(4, 5), }; #endif /* ifdef CONFIG_SOC_IMX53 */ diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index 03f626645374..bf93820ab61c 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -9,8 +9,10 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/init.h> +#include <mach/sdma.h> extern struct device mxc_aips_bus; +extern struct device mxc_ahb_bus; struct platform_device *imx_add_platform_device_dmamask( const char *name, int id, @@ -293,3 +295,7 @@ struct imx_spi_imx_data { struct platform_device *__init imx_add_spi_imx( const struct imx_spi_imx_data *data, const struct spi_imx_master *pdata); + +struct platform_device *imx_add_imx_dma(void); +struct platform_device *imx_add_imx_sdma( + resource_size_t iobase, int irq, struct sdma_platform_data *pdata); diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h index 74cd093203e0..5e3c3236ebf3 100644 --- a/arch/arm/plat-mxc/include/mach/mx53.h +++ b/arch/arm/plat-mxc/include/mach/mx53.h @@ -176,10 +176,10 @@ /* * DMA request assignments */ -#define MX53_DMA_REQ_SSI3_TX1 47 -#define MX53_DMA_REQ_SSI3_RX1 46 -#define MX53_DMA_REQ_SSI3_TX2 45 -#define MX53_DMA_REQ_SSI3_RX2 44 +#define MX53_DMA_REQ_SSI3_TX0 47 +#define MX53_DMA_REQ_SSI3_RX0 46 +#define MX53_DMA_REQ_SSI3_TX1 45 +#define MX53_DMA_REQ_SSI3_RX1 44 #define MX53_DMA_REQ_UART3_TX 43 #define MX53_DMA_REQ_UART3_RX 42 #define MX53_DMA_REQ_ESAI_TX 41 @@ -194,14 +194,14 @@ #define MX53_DMA_REQ_ASRC_DMA1 32 #define MX53_DMA_REQ_EMI_WR 31 #define MX53_DMA_REQ_EMI_RD 30 -#define MX53_DMA_REQ_SSI1_TX1 29 -#define MX53_DMA_REQ_SSI1_RX1 28 -#define MX53_DMA_REQ_SSI1_TX2 27 -#define MX53_DMA_REQ_SSI1_RX2 26 -#define MX53_DMA_REQ_SSI2_TX1 25 -#define MX53_DMA_REQ_SSI2_RX1 24 -#define MX53_DMA_REQ_SSI2_TX2 23 -#define MX53_DMA_REQ_SSI2_RX2 22 +#define MX53_DMA_REQ_SSI1_TX0 29 +#define MX53_DMA_REQ_SSI1_RX0 28 +#define MX53_DMA_REQ_SSI1_TX1 27 +#define MX53_DMA_REQ_SSI1_RX1 26 +#define MX53_DMA_REQ_SSI2_TX0 25 +#define MX53_DMA_REQ_SSI2_RX0 24 +#define MX53_DMA_REQ_SSI2_TX1 23 +#define MX53_DMA_REQ_SSI2_RX1 22 #define MX53_DMA_REQ_I2C2_SDHC2 21 #define MX53_DMA_REQ_I2C1_SDHC1 20 #define MX53_DMA_REQ_UART1_TX 19 @@ -241,7 +241,7 @@ #define MX53_INT_IPU_ERR 10 #define MX53_INT_IPU_SYN 11 #define MX53_INT_GPU 12 -#define MX53_INT_RESV13 13 +#define MX53_INT_UART4 13 #define MX53_INT_USB_H1 14 #define MX53_INT_EMI 15 #define MX53_INT_USB_H2 16 @@ -314,7 +314,7 @@ #define MX53_INT_CAN2 83 #define MX53_INT_GPU2_IRQ 84 #define MX53_INT_GPU2_BUSY 85 -#define MX53_INT_RESV86 86 +#define MX53_INT_UART5 86 #define MX53_INT_FEC 87 #define MX53_INT_OWIRE 88 #define MX53_INT_CTI1_TG2 89 diff --git a/arch/arm/plat-mxc/include/mach/sdma.h b/arch/arm/plat-mxc/include/mach/sdma.h index 913e0432e40e..f495c87c113f 100644 --- a/arch/arm/plat-mxc/include/mach/sdma.h +++ b/arch/arm/plat-mxc/include/mach/sdma.h @@ -49,14 +49,12 @@ struct sdma_script_start_addrs { * struct sdma_platform_data - platform specific data for SDMA engine * * @sdma_version The version of this SDMA engine - * @cpu_name used to generate the firmware name - * @to_version CPU Tape out version + * @fw_name The firmware name * @script_addrs SDMA scripts addresses in SDMA ROM */ struct sdma_platform_data { int sdma_version; - char *cpu_name; - int to_version; + char *fw_name; struct sdma_script_start_addrs *script_addrs; }; diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index d85e2d1c0324..88fd40452567 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -117,6 +117,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MX53_EVK: case MACH_TYPE_MX53_LOCO: case MACH_TYPE_MX53_SMD: + case MACH_TYPE_MX53_ARD: uart_base = MX53_UART1_BASE_ADDR; break; default: diff --git a/arch/arm/plat-mxc/irq-common.c b/arch/arm/plat-mxc/irq-common.c index e1c6eff7258a..96953e2e4f11 100644 --- a/arch/arm/plat-mxc/irq-common.c +++ b/arch/arm/plat-mxc/irq-common.c @@ -42,17 +42,16 @@ EXPORT_SYMBOL(imx_irq_set_priority); int mxc_set_irq_fiq(unsigned int irq, unsigned int type) { - struct mxc_irq_chip *chip; - struct irq_chip *base; + struct irq_chip_generic *gc; + int (*set_irq_fiq)(unsigned int, unsigned int); int ret; ret = -ENOSYS; - base = irq_get_chip(irq); - if (base) { - chip = container_of(base, struct mxc_irq_chip, base); - if (chip->set_irq_fiq) - ret = chip->set_irq_fiq(irq, type); + gc = irq_get_chip_data(irq); + if (gc && gc->private) { + set_irq_fiq = gc->private; + ret = set_irq_fiq(irq, type); } return ret; diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index 710f2e7da4ce..f257fccdc394 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -68,78 +68,34 @@ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type) return 0; } +#else +#define tzic_set_irq_fiq NULL #endif -/** - * tzic_mask_irq() - Disable interrupt source "d" in the TZIC - * - * @param d interrupt source - */ -static void tzic_mask_irq(struct irq_data *d) -{ - int index, off; - - index = d->irq >> 5; - off = d->irq & 0x1F; - __raw_writel(1 << off, tzic_base + TZIC_ENCLEAR0(index)); -} - -/** - * tzic_unmask_irq() - Enable interrupt source "d" in the TZIC - * - * @param d interrupt source - */ -static void tzic_unmask_irq(struct irq_data *d) -{ - int index, off; - - index = d->irq >> 5; - off = d->irq & 0x1F; - __raw_writel(1 << off, tzic_base + TZIC_ENSET0(index)); -} - -static unsigned int wakeup_intr[4]; +static unsigned int *wakeup_intr[4]; -/** - * tzic_set_wake_irq() - Set interrupt source "d" in the TZIC as a wake-up source. - * - * @param d interrupt source - * @param enable enable as wake-up if equal to non-zero - * disble as wake-up if equal to zero - * - * @return This function returns 0 on success. - */ -static int tzic_set_wake_irq(struct irq_data *d, unsigned int enable) +static __init void tzic_init_gc(unsigned int irq_start) { - unsigned int index, off; - - index = d->irq >> 5; - off = d->irq & 0x1F; - - if (index > 3) - return -EINVAL; - - if (enable) - wakeup_intr[index] |= (1 << off); - else - wakeup_intr[index] &= ~(1 << off); - - return 0; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + int idx = irq_start >> 5; + + gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base, + handle_level_irq); + gc->private = tzic_set_irq_fiq; + gc->wake_enabled = IRQ_MSK(32); + wakeup_intr[idx] = &gc->wake_active; + + ct = gc->chip_types; + ct->chip.irq_mask = irq_gc_mask_disable_reg; + ct->chip.irq_unmask = irq_gc_unmask_enable_reg; + ct->chip.irq_set_wake = irq_gc_set_wake; + ct->regs.disable = TZIC_ENCLEAR0(idx); + ct->regs.enable = TZIC_ENSET0(idx); + + irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); } -static struct mxc_irq_chip mxc_tzic_chip = { - .base = { - .name = "MXC_TZIC", - .irq_ack = tzic_mask_irq, - .irq_mask = tzic_mask_irq, - .irq_unmask = tzic_unmask_irq, - .irq_set_wake = tzic_set_wake_irq, - }, -#ifdef CONFIG_FIQ - .set_irq_fiq = tzic_set_irq_fiq, -#endif -}; - /* * This function initializes the TZIC hardware and disables all the * interrupts. It registers the interrupt enable and disable functions @@ -168,11 +124,8 @@ void __init tzic_init_irq(void __iomem *irqbase) /* all IRQ no FIQ Warning :: No selection */ - for (i = 0; i < TZIC_NUM_IRQS; i++) { - irq_set_chip_and_handler(i, &mxc_tzic_chip.base, - handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } + for (i = 0; i < TZIC_NUM_IRQS; i += 32) + tzic_init_gc(i); #ifdef CONFIG_FIQ /* Initialize FIQ */ @@ -199,7 +152,7 @@ int tzic_enable_wake(int is_idle) for (i = 0; i < 4; i++) { v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) : - wakeup_intr[i]; + *wakeup_intr[i]; __raw_writel(v, tzic_base + TZIC_WAKEUP0(i)); } diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index e98f5c5c7879..9843c954c042 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -39,6 +39,7 @@ config S5P_GPIO_INT config S5P_HRT bool + select SAMSUNG_DEV_PWM help Use the High Resolution timer support @@ -70,6 +71,16 @@ config S5P_DEV_FIMC3 help Compile in platform device definitions for FIMC controller 3 +config S5P_DEV_FIMD0 + bool + help + Compile in platform device definitions for FIMD controller 0 + +config S5P_DEV_MFC + bool + help + Compile in platform device definitions for MFC + config S5P_DEV_ONENAND bool help diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index e234cc4d49a0..4b53e04eeca4 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -25,11 +25,12 @@ obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_S5P_HRT) += s5p-time.o # devices - +obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc.o obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o obj-$(CONFIG_S5P_DEV_FIMC3) += dev-fimc3.o +obj-$(CONFIG_S5P_DEV_FIMD0) += dev-fimd0.o obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o diff --git a/arch/arm/plat-s5p/dev-fimd0.c b/arch/arm/plat-s5p/dev-fimd0.c new file mode 100644 index 000000000000..f728bb5abcef --- /dev/null +++ b/arch/arm/plat-s5p/dev-fimd0.c @@ -0,0 +1,67 @@ +/* linux/arch/arm/plat-s5p/dev-fimd0.c + * + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Core file for Samsung Display Controller (FIMD) driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/gfp.h> +#include <linux/dma-mapping.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/fb.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s5p_fimd0_resource[] = { + [0] = { + .start = S5P_PA_FIMD0, + .end = S5P_PA_FIMD0 + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_FIMD0_VSYNC, + .end = IRQ_FIMD0_VSYNC, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_FIMD0_FIFO, + .end = IRQ_FIMD0_FIFO, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_FIMD0_SYSTEM, + .end = IRQ_FIMD0_SYSTEM, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 fimd0_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5p_device_fimd0 = { + .name = "s5p-fb", + .id = 0, + .num_resources = ARRAY_SIZE(s5p_fimd0_resource), + .resource = s5p_fimd0_resource, + .dev = { + .dma_mask = &fimd0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void __init s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd) +{ + s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata), + &s5p_device_fimd0); +} diff --git a/arch/arm/plat-s5p/dev-mfc.c b/arch/arm/plat-s5p/dev-mfc.c new file mode 100644 index 000000000000..94226a0010f7 --- /dev/null +++ b/arch/arm/plat-s5p/dev-mfc.c @@ -0,0 +1,123 @@ +/* linux/arch/arm/plat-s5p/dev-mfc.c + * + * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd + * + * Base S5P MFC resource and device definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/memblock.h> +#include <linux/ioport.h> + +#include <mach/map.h> +#include <plat/devs.h> +#include <plat/irqs.h> +#include <plat/mfc.h> + +static struct resource s5p_mfc_resource[] = { + [0] = { + .start = S5P_PA_MFC, + .end = S5P_PA_MFC + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_MFC, + .end = IRQ_MFC, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device s5p_device_mfc = { + .name = "s5p-mfc", + .id = -1, + .num_resources = ARRAY_SIZE(s5p_mfc_resource), + .resource = s5p_mfc_resource, +}; + +/* + * MFC hardware has 2 memory interfaces which are modelled as two separate + * platform devices to let dma-mapping distinguish between them. + * + * MFC parent device (s5p_device_mfc) must be registered before memory + * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r). + */ + +static u64 s5p_mfc_dma_mask = DMA_BIT_MASK(32); + +struct platform_device s5p_device_mfc_l = { + .name = "s5p-mfc-l", + .id = -1, + .dev = { + .parent = &s5p_device_mfc.dev, + .dma_mask = &s5p_mfc_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct platform_device s5p_device_mfc_r = { + .name = "s5p-mfc-r", + .id = -1, + .dev = { + .parent = &s5p_device_mfc.dev, + .dma_mask = &s5p_mfc_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct s5p_mfc_reserved_mem { + phys_addr_t base; + unsigned long size; + struct device *dev; +}; + +static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata; + +void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, + phys_addr_t lbase, unsigned int lsize) +{ + int i; + + s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev; + s5p_mfc_mem[0].base = rbase; + s5p_mfc_mem[0].size = rsize; + + s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev; + s5p_mfc_mem[1].base = lbase; + s5p_mfc_mem[1].size = lsize; + + for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) { + struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i]; + if (memblock_remove(area->base, area->size)) { + printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n", + area->size, (unsigned long) area->base); + area->base = 0; + } + } +} + +static int __init s5p_mfc_memory_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) { + struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i]; + if (!area->base) + continue; + + if (dma_declare_coherent_memory(area->dev, area->base, + area->base, area->size, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0) + printk(KERN_ERR "Failed to declare coherent memory for MFC device (%ld bytes at 0x%08lx)\n", + area->size, (unsigned long) area->base); + } + return 0; +} +device_initcall(s5p_mfc_memory_init); diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h index d973d39666a3..36d3551173b2 100644 --- a/arch/arm/plat-s5p/include/plat/map-s5p.h +++ b/arch/arm/plat-s5p/include/plat/map-s5p.h @@ -35,9 +35,10 @@ #define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000) #define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x)) #define S5P_VA_SCU S5P_VA_COREPERI(0x0) -#define S5P_VA_GIC_CPU S5P_VA_COREPERI(0x100) #define S5P_VA_TWD S5P_VA_COREPERI(0x600) -#define S5P_VA_GIC_DIST S5P_VA_COREPERI(0x1000) + +#define S5P_VA_GIC_CPU S3C_ADDR(0x02810000) +#define S5P_VA_GIC_DIST S3C_ADDR(0x02820000) #define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000) diff --git a/arch/arm/plat-s5p/include/plat/mfc.h b/arch/arm/plat-s5p/include/plat/mfc.h new file mode 100644 index 000000000000..6697f8cb2949 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/mfc.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co.Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PLAT_S5P_MFC_H +#define __PLAT_S5P_MFC_H + +/** + * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver + * @rbase: base address for MFC 'right' memory interface + * @rsize: size of the memory reserved for MFC 'right' interface + * @lbase: base address for MFC 'left' memory interface + * @lsize: size of the memory reserved for MFC 'left' interface + * + * This function reserves system memory for both MFC device memory + * interfaces and registers it to respective struct device entries as + * coherent memory. + */ +void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, + phys_addr_t lbase, unsigned int lsize); + +#endif /* __PLAT_S5P_MFC_H */ diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index e8f2be2d67f2..ee8deef19481 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -21,6 +21,7 @@ #include <linux/clk.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/regulator/consumer.h> #include <plat/regs-adc.h> #include <plat/adc.h> @@ -39,8 +40,9 @@ */ enum s3c_cpu_type { - TYPE_S3C24XX, - TYPE_S3C64XX + TYPE_ADCV1, /* S3C24XX */ + TYPE_ADCV2, /* S3C64XX, S5P64X0, S5PC100 */ + TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */ }; struct s3c_adc_client { @@ -71,6 +73,7 @@ struct adc_device { unsigned int prescale; int irq; + struct regulator *vdd; }; static struct adc_device *adc_dev; @@ -91,6 +94,7 @@ static inline void s3c_adc_select(struct adc_device *adc, struct s3c_adc_client *client) { unsigned con = readl(adc->regs + S3C2410_ADCCON); + enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data; client->select_cb(client, 1); @@ -98,8 +102,12 @@ static inline void s3c_adc_select(struct adc_device *adc, con &= ~S3C2410_ADCCON_STDBM; con &= ~S3C2410_ADCCON_STARTMASK; - if (!client->is_ts) - con |= S3C2410_ADCCON_SELMUX(client->channel); + if (!client->is_ts) { + if (cpu == TYPE_ADCV3) + writel(client->channel & 0xf, adc->regs + S5P_ADCMUX); + else + con |= S3C2410_ADCCON_SELMUX(client->channel); + } writel(con, adc->regs + S3C2410_ADCCON); } @@ -285,8 +293,8 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) client->nr_samples--; - if (cpu == TYPE_S3C64XX) { - /* S3C64XX ADC resolution is 12-bit */ + if (cpu != TYPE_ADCV1) { + /* S3C64XX/S5P ADC resolution is 12-bit */ data0 &= 0xfff; data1 &= 0xfff; } else { @@ -312,7 +320,7 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) } exit: - if (cpu == TYPE_S3C64XX) { + if (cpu != TYPE_ADCV1) { /* Clear ADC interrupt */ writel(0, adc->regs + S3C64XX_ADCCLRINT); } @@ -338,17 +346,24 @@ static int s3c_adc_probe(struct platform_device *pdev) adc->pdev = pdev; adc->prescale = S3C2410_ADCCON_PRSCVL(49); + adc->vdd = regulator_get(dev, "vdd"); + if (IS_ERR(adc->vdd)) { + dev_err(dev, "operating without regulator \"vdd\" .\n"); + ret = PTR_ERR(adc->vdd); + goto err_alloc; + } + adc->irq = platform_get_irq(pdev, 1); if (adc->irq <= 0) { dev_err(dev, "failed to get adc irq\n"); ret = -ENOENT; - goto err_alloc; + goto err_reg; } ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc); if (ret < 0) { dev_err(dev, "failed to attach adc irq\n"); - goto err_alloc; + goto err_reg; } adc->clk = clk_get(dev, "adc"); @@ -372,10 +387,14 @@ static int s3c_adc_probe(struct platform_device *pdev) goto err_clk; } + ret = regulator_enable(adc->vdd); + if (ret) + goto err_ioremap; + clk_enable(adc->clk); tmp = adc->prescale | S3C2410_ADCCON_PRSCEN; - if (platform_get_device_id(pdev)->driver_data == TYPE_S3C64XX) { + if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1) { /* Enable 12-bit ADC resolution */ tmp |= S3C64XX_ADCCON_RESSEL; } @@ -388,12 +407,15 @@ static int s3c_adc_probe(struct platform_device *pdev) return 0; + err_ioremap: + iounmap(adc->regs); err_clk: clk_put(adc->clk); err_irq: free_irq(adc->irq, adc); - + err_reg: + regulator_put(adc->vdd); err_alloc: kfree(adc); return ret; @@ -406,6 +428,8 @@ static int __devexit s3c_adc_remove(struct platform_device *pdev) iounmap(adc->regs); free_irq(adc->irq, adc); clk_disable(adc->clk); + regulator_disable(adc->vdd); + regulator_put(adc->vdd); clk_put(adc->clk); kfree(adc); @@ -413,8 +437,10 @@ static int __devexit s3c_adc_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state) +static int s3c_adc_suspend(struct device *dev) { + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); struct adc_device *adc = platform_get_drvdata(pdev); unsigned long flags; u32 con; @@ -428,19 +454,30 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state) disable_irq(adc->irq); spin_unlock_irqrestore(&adc->lock, flags); clk_disable(adc->clk); + regulator_disable(adc->vdd); return 0; } -static int s3c_adc_resume(struct platform_device *pdev) +static int s3c_adc_resume(struct device *dev) { + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); struct adc_device *adc = platform_get_drvdata(pdev); + int ret; + unsigned long tmp; + ret = regulator_enable(adc->vdd); + if (ret) + return ret; clk_enable(adc->clk); enable_irq(adc->irq); - writel(adc->prescale | S3C2410_ADCCON_PRSCEN, - adc->regs + S3C2410_ADCCON); + tmp = adc->prescale | S3C2410_ADCCON_PRSCEN; + /* Enable 12-bit ADC resolution */ + if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1) + tmp |= S3C64XX_ADCCON_RESSEL; + writel(tmp, adc->regs + S3C2410_ADCCON); return 0; } @@ -453,25 +490,32 @@ static int s3c_adc_resume(struct platform_device *pdev) static struct platform_device_id s3c_adc_driver_ids[] = { { .name = "s3c24xx-adc", - .driver_data = TYPE_S3C24XX, + .driver_data = TYPE_ADCV1, }, { .name = "s3c64xx-adc", - .driver_data = TYPE_S3C64XX, + .driver_data = TYPE_ADCV2, + }, { + .name = "samsung-adc-v3", + .driver_data = TYPE_ADCV3, }, { } }; MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids); +static const struct dev_pm_ops adc_pm_ops = { + .suspend = s3c_adc_suspend, + .resume = s3c_adc_resume, +}; + static struct platform_driver s3c_adc_driver = { .id_table = s3c_adc_driver_ids, .driver = { .name = "s3c-adc", .owner = THIS_MODULE, + .pm = &adc_pm_ops, }, .probe = s3c_adc_probe, .remove = __devexit_p(s3c_adc_remove), - .suspend = s3c_adc_suspend, - .resume = s3c_adc_resume, }; static int __init adc_init(void) @@ -485,4 +529,4 @@ static int __init adc_init(void) return ret; } -arch_initcall(adc_init); +module_init(adc_init); diff --git a/arch/arm/plat-samsung/dev-asocdma.c b/arch/arm/plat-samsung/dev-asocdma.c index a068c4f42d56..97e35d3c064d 100644 --- a/arch/arm/plat-samsung/dev-asocdma.c +++ b/arch/arm/plat-samsung/dev-asocdma.c @@ -23,3 +23,13 @@ struct platform_device samsung_asoc_dma = { } }; EXPORT_SYMBOL(samsung_asoc_dma); + +struct platform_device samsung_asoc_idma = { + .name = "samsung-idma", + .id = -1, + .dev = { + .dma_mask = &audio_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; +EXPORT_SYMBOL(samsung_asoc_idma); diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h index a0826ed2f9fe..aa9875f77c40 100644 --- a/arch/arm/plat-samsung/include/plat/audio.h +++ b/arch/arm/plat-samsung/include/plat/audio.h @@ -44,6 +44,7 @@ struct samsung_i2s { * Also corresponds to clocks of I2SMOD[10] */ const char **src_clk; + dma_addr_t idma_addr; }; /** diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index e3b31c26ac3e..24ebb1e1de41 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -40,6 +40,7 @@ extern struct platform_device s3c64xx_device_spi0; extern struct platform_device s3c64xx_device_spi1; extern struct platform_device samsung_asoc_dma; +extern struct platform_device samsung_asoc_idma; extern struct platform_device s3c64xx_device_pcm0; extern struct platform_device s3c64xx_device_pcm1; @@ -49,6 +50,7 @@ extern struct platform_device s3c64xx_device_ac97; extern struct platform_device s3c_device_ts; extern struct platform_device s3c_device_fb; +extern struct platform_device s5p_device_fimd0; extern struct platform_device s3c_device_ohci; extern struct platform_device s3c_device_lcd; extern struct platform_device s3c_device_wdt; @@ -112,6 +114,7 @@ extern struct platform_device exynos4_device_i2s2; extern struct platform_device exynos4_device_spdif; extern struct platform_device exynos4_device_pd[]; extern struct platform_device exynos4_device_ahci; +extern struct platform_device exynos4_device_dwmci; extern struct platform_device s5p6440_device_pcm; extern struct platform_device s5p6440_device_iis; @@ -136,6 +139,9 @@ extern struct platform_device s5p_device_fimc1; extern struct platform_device s5p_device_fimc2; extern struct platform_device s5p_device_fimc3; +extern struct platform_device s5p_device_mfc; +extern struct platform_device s5p_device_mfc_l; +extern struct platform_device s5p_device_mfc_r; extern struct platform_device s5p_device_mipi_csis0; extern struct platform_device s5p_device_mipi_csis1; diff --git a/arch/arm/plat-samsung/include/plat/fb-core.h b/arch/arm/plat-samsung/include/plat/fb-core.h index bca383efcf6d..6abcbf139cee 100644 --- a/arch/arm/plat-samsung/include/plat/fb-core.h +++ b/arch/arm/plat-samsung/include/plat/fb-core.h @@ -26,4 +26,19 @@ static inline void s3c_fb_setname(char *name) #endif } +/* Re-define device name depending on support. */ +static inline void s5p_fb_setname(int id, char *name) +{ + switch (id) { +#ifdef CONFIG_S5P_DEV_FIMD0 + case 0: + s5p_device_fimd0.name = name; + break; +#endif + default: + printk(KERN_ERR "%s: invalid device id(%d)\n", __func__, id); + break; + } +} + #endif /* __ASM_PLAT_FB_CORE_H */ diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index cb3ca3adc685..01f10e4d00c7 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -74,6 +74,14 @@ struct s3c_fb_platdata { extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd); /** + * s5p_fimd0_set_platdata() - Setup the FB device with platform data. + * @pd: The platform data to set. The data is copied from the passed structure + * so the machine data can mark the data __initdata so that any unused + * machines will end up dumping their data at runtime. + */ +extern void s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd); + +/** * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD * * Initialise the GPIO for an 24bpp LCD display on the RGB interface. @@ -94,4 +102,11 @@ extern void s5pc100_fb_gpio_setup_24bpp(void); */ extern void s5pv210_fb_gpio_setup_24bpp(void); +/** + * exynos4_fimd0_gpio_setup_24bpp() - Exynos4 setup function for 24bpp LCD0 + * + * Initialise the GPIO for an 24bpp LCD display on the RGB interface 0. + */ +extern void exynos4_fimd0_gpio_setup_24bpp(void); + #endif /* __PLAT_S3C_FB_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-adc.h b/arch/arm/plat-samsung/include/plat/regs-adc.h index 7554c4fcddb9..035e8c38d69c 100644 --- a/arch/arm/plat-samsung/include/plat/regs-adc.h +++ b/arch/arm/plat-samsung/include/plat/regs-adc.h @@ -21,6 +21,7 @@ #define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10) #define S3C64XX_ADCUPDN S3C2410_ADCREG(0x14) #define S3C64XX_ADCCLRINT S3C2410_ADCREG(0x18) +#define S5P_ADCMUX S3C2410_ADCREG(0x1C) #define S3C64XX_ADCCLRINTPNDNUP S3C2410_ADCREG(0x20) diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c index 657405c481d0..3014c7226bd1 100644 --- a/arch/arm/plat-samsung/irq-uart.c +++ b/arch/arm/plat-samsung/irq-uart.c @@ -19,6 +19,8 @@ #include <linux/irq.h> #include <linux/io.h> +#include <asm/mach/irq.h> + #include <mach/map.h> #include <plat/irq-uart.h> #include <plat/regs-serial.h> @@ -30,9 +32,12 @@ static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) { struct s3c_uart_irq *uirq = desc->irq_data.handler_data; + struct irq_chip *chip = irq_get_chip(irq); u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP); int base = uirq->base_irq; + chained_irq_enter(chip, desc); + if (pend & (1 << 0)) generic_handle_irq(base); if (pend & (1 << 1)) @@ -41,6 +46,8 @@ static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) generic_handle_irq(base + 2); if (pend & (1 << 3)) generic_handle_irq(base + 3); + + chained_irq_exit(chip, desc); } static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 5fa1742d019b..ae6f99834cdd 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -269,6 +269,7 @@ static int s3c_pm_enter(suspend_state_t state) /* save all necessary core registers not covered by the drivers */ s3c_pm_save_gpios(); + s3c_pm_saved_gpios(); s3c_pm_save_uarts(); s3c_pm_save_core(); @@ -306,6 +307,7 @@ static int s3c_pm_enter(suspend_state_t state) s3c_pm_restore_core(); s3c_pm_restore_uarts(); s3c_pm_restore_gpios(); + s3c_pm_restored_gpios(); s3c_pm_debug_init(); |